drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 config PINCTRL
   6         bool
   7
   8 if PINCTRL
   9
  10 menu "Pin controllers"
  11         depends on PINCTRL
  12
  13 config PINMUX
  14         bool "Support pin multiplexing controllers" if COMPILE_TEST
  15
  16 config PINCONF
  17         bool "Support pin configuration controllers" if COMPILE_TEST
  18
  19 config GENERIC_PINCONF
  20         bool
  21         select PINCONF
  22
  23 config DEBUG_PINCTRL
  24         bool "Debug PINCTRL calls"
  25         depends on DEBUG_KERNEL
  26         help
  27           Say Y here to add some extra checks and diagnostics to PINCTRL calls.
  28
  29 config PINCTRL_ADI2
  30         bool "ADI pin controller driver"
  31         depends on BLACKFIN
  32         select PINMUX
  33         select IRQ_DOMAIN
  34         help
  35           This is the pin controller and gpio driver for ADI BF54x, BF60x and
  36           future processors. This option is selected automatically when specific
  37           machine and arch are selected to build.
  38
  39 config PINCTRL_AS3722
  40         bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
  41         depends on MFD_AS3722 && GPIOLIB
  42         select PINMUX
  43         select GENERIC_PINCONF
  44         help
  45           AS3722 device supports the configuration of GPIO pins for different
  46           functionality. This driver supports the pinmux, push-pull and
  47           open drain configuration for the GPIO pins of AS3722 devices. It also
  48           supports the GPIO functionality through gpiolib.
  49
  50 config PINCTRL_BF54x
  51         def_bool y if BF54x
  52         select PINCTRL_ADI2
  53
  54 config PINCTRL_BF60x
  55         def_bool y if BF60x
  56         select PINCTRL_ADI2
  57
  58 config PINCTRL_AT91
  59         bool "AT91 pinctrl driver"
  60         depends on OF
  61         depends on ARCH_AT91
  62         select PINMUX
  63         select PINCONF
  64         select GPIOLIB
  65         select OF_GPIO
  66         select GPIOLIB_IRQCHIP
  67         help
  68           Say Y here to enable the at91 pinctrl driver
  69
  70 config PINCTRL_BAYTRAIL
  71         bool "Intel Baytrail GPIO pin control"
  72         depends on GPIOLIB && ACPI && X86
  73         select GPIOLIB_IRQCHIP
  74         help
  75           driver for memory mapped GPIO functionality on Intel Baytrail
  76           platforms. Supports 3 banks with 102, 28 and 44 gpios.
  77           Most pins are usually muxed to some other functionality by firmware,
  78           so only a small amount is available for gpio use.
  79
  80           Requires ACPI device enumeration code to set up a platform device.
  81
  82 config PINCTRL_BCM2835
  83         bool
  84         select PINMUX
  85         select PINCONF
  86
  87 config PINCTRL_BCM281XX
  88         bool "Broadcom BCM281xx pinctrl driver"
  89         depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
  90         select PINMUX
  91         select PINCONF
  92         select GENERIC_PINCONF
  93         select REGMAP_MMIO
  94         help
  95           Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
  96           for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
  97           BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
  98           framework.  GPIO is provided by a separate GPIO driver.
  99
 100 config PINCTRL_LANTIQ
 101         bool
 102         depends on LANTIQ
 103         select PINMUX
 104         select PINCONF
 105
 106 config PINCTRL_FALCON
 107         bool
 108         depends on SOC_FALCON
 109         depends on PINCTRL_LANTIQ
 110
 111 config PINCTRL_ROCKCHIP
 112         bool
 113         select PINMUX
 114         select GENERIC_PINCONF
 115         select GENERIC_IRQ_CHIP
 116         select MFD_SYSCON
 117
 118 config PINCTRL_SINGLE
 119         tristate "One-register-per-pin type device tree based pinctrl driver"
 120         depends on OF
 121         select PINMUX
 122         select PINCONF
 123         select GENERIC_PINCONF
 124         help
 125           This selects the device tree based generic pinctrl driver.
 126
 127 config PINCTRL_SIRF
 128         bool "CSR SiRFprimaII/SiRFmarco pin controller driver"
 129         depends on ARCH_SIRF
 130         select PINMUX
 131         select GPIOLIB_IRQCHIP
 132
 133 config PINCTRL_ST
 134         bool
 135         depends on OF
 136         select PINMUX
 137         select PINCONF
 138         select GPIOLIB_IRQCHIP
 139
 140 config PINCTRL_TEGRA
 141         bool
 142         select PINMUX
 143         select PINCONF
 144
 145 config PINCTRL_TEGRA20
 146         bool
 147         select PINCTRL_TEGRA
 148
 149 config PINCTRL_TEGRA30
 150         bool
 151         select PINCTRL_TEGRA
 152
 153 config PINCTRL_TEGRA114
 154         bool
 155         select PINCTRL_TEGRA
 156
 157 config PINCTRL_TEGRA124
 158         bool
 159         select PINCTRL_TEGRA
 160
 161 config PINCTRL_TEGRA_XUSB
 162         def_bool y if ARCH_TEGRA
 163         select GENERIC_PHY
 164         select PINCONF
 165         select PINMUX
 166
 167 config PINCTRL_TZ1090
 168         bool "Toumaz Xenif TZ1090 pin control driver"
 169         depends on SOC_TZ1090
 170         select PINMUX
 171         select GENERIC_PINCONF
 172
 173 config PINCTRL_TZ1090_PDC
 174         bool "Toumaz Xenif TZ1090 PDC pin control driver"
 175         depends on SOC_TZ1090
 176         select PINMUX
 177         select PINCONF
 178
 179 config PINCTRL_U300
 180         bool "U300 pin controller driver"
 181         depends on ARCH_U300
 182         select PINMUX
 183         select GENERIC_PINCONF
 184
 185 config PINCTRL_COH901
 186         bool "ST-Ericsson U300 COH 901 335/571 GPIO"
 187         depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 188         select GPIOLIB_IRQCHIP
 189         help
 190           Say yes here to support GPIO interface on ST-Ericsson U300.
 191           The names of the two IP block variants supported are
 192           COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 193           ports of 8 GPIO pins each.
 194
 195 config PINCTRL_PALMAS
 196         bool "Pinctrl driver for the PALMAS Series MFD devices"
 197         depends on OF && MFD_PALMAS
 198         select PINMUX
 199         select GENERIC_PINCONF
 200         help
 201           Palmas device supports the configuration of pins for different
 202           functionality. This driver supports the pinmux, push-pull and
 203           open drain configuration for the Palmas series devices like
 204           TPS65913, TPS80036 etc.
 205
 206 source "drivers/pinctrl/berlin/Kconfig"
 207 source "drivers/pinctrl/freescale/Kconfig"
 208 source "drivers/pinctrl/mvebu/Kconfig"
 209 source "drivers/pinctrl/nomadik/Kconfig"
 210 source "drivers/pinctrl/qcom/Kconfig"
 211 source "drivers/pinctrl/samsung/Kconfig"
 212 source "drivers/pinctrl/sh-pfc/Kconfig"
 213 source "drivers/pinctrl/spear/Kconfig"
 214 source "drivers/pinctrl/sunxi/Kconfig"
 215 source "drivers/pinctrl/vt8500/Kconfig"
 216
 217 config PINCTRL_XWAY
 218         bool
 219         depends on SOC_TYPE_XWAY
 220         depends on PINCTRL_LANTIQ
 221
 222 config PINCTRL_TB10X
 223         bool
 224         depends on ARC_PLAT_TB10X
 225
 226 endmenu
 227
 228 endif