drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c

   1 /*
   2  * Copyright (c) 2015, Sony Mobile Communications AB.
   3  * Copyright (c) 2013, The Linux Foundation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 and
   7  * only version 2 as published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  */
  14
  15 #include <linux/module.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/pinctrl/pinctrl.h>
  18 #include <linux/pinctrl/pinmux.h>
  19 #include <linux/pinctrl/pinconf.h>
  20 #include <linux/pinctrl/pinconf-generic.h>
  21 #include <linux/slab.h>
  22 #include <linux/regmap.h>
  23 #include <linux/gpio.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/of_device.h>
  26 #include <linux/of_irq.h>
  27
  28 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
  29
  30 #include "../core.h"
  31 #include "../pinctrl-utils.h"
  32
  33 /* MPP registers */
  34 #define SSBI_REG_ADDR_MPP_BASE          0x50
  35 #define SSBI_REG_ADDR_MPP(n)            (SSBI_REG_ADDR_MPP_BASE + n)
  36
  37 /* MPP Type: type */
  38 #define PM8XXX_MPP_TYPE_D_INPUT         0
  39 #define PM8XXX_MPP_TYPE_D_OUTPUT        1
  40 #define PM8XXX_MPP_TYPE_D_BI_DIR        2
  41 #define PM8XXX_MPP_TYPE_A_INPUT         3
  42 #define PM8XXX_MPP_TYPE_A_OUTPUT        4
  43 #define PM8XXX_MPP_TYPE_SINK            5
  44 #define PM8XXX_MPP_TYPE_DTEST_SINK      6
  45 #define PM8XXX_MPP_TYPE_DTEST_OUTPUT    7
  46
  47 /* Digital Input: control */
  48 #define PM8XXX_MPP_DIN_TO_INT           0
  49 #define PM8XXX_MPP_DIN_TO_DBUS1         1
  50 #define PM8XXX_MPP_DIN_TO_DBUS2         2
  51 #define PM8XXX_MPP_DIN_TO_DBUS3         3
  52
  53 /* Digital Output: control */
  54 #define PM8XXX_MPP_DOUT_CTRL_LOW        0
  55 #define PM8XXX_MPP_DOUT_CTRL_HIGH       1
  56 #define PM8XXX_MPP_DOUT_CTRL_MPP        2
  57 #define PM8XXX_MPP_DOUT_CTRL_INV_MPP    3
  58
  59 /* Bidirectional: control */
  60 #define PM8XXX_MPP_BI_PULLUP_1KOHM      0
  61 #define PM8XXX_MPP_BI_PULLUP_OPEN       1
  62 #define PM8XXX_MPP_BI_PULLUP_10KOHM     2
  63 #define PM8XXX_MPP_BI_PULLUP_30KOHM     3
  64
  65 /* Analog Output: control */
  66 #define PM8XXX_MPP_AOUT_CTRL_DISABLE            0
  67 #define PM8XXX_MPP_AOUT_CTRL_ENABLE             1
  68 #define PM8XXX_MPP_AOUT_CTRL_MPP_HIGH_EN        2
  69 #define PM8XXX_MPP_AOUT_CTRL_MPP_LOW_EN         3
  70
  71 /* Current Sink: control */
  72 #define PM8XXX_MPP_CS_CTRL_DISABLE      0
  73 #define PM8XXX_MPP_CS_CTRL_ENABLE       1
  74 #define PM8XXX_MPP_CS_CTRL_MPP_HIGH_EN  2
  75 #define PM8XXX_MPP_CS_CTRL_MPP_LOW_EN   3
  76
  77 /* DTEST Current Sink: control */
  78 #define PM8XXX_MPP_DTEST_CS_CTRL_EN1    0
  79 #define PM8XXX_MPP_DTEST_CS_CTRL_EN2    1
  80 #define PM8XXX_MPP_DTEST_CS_CTRL_EN3    2
  81 #define PM8XXX_MPP_DTEST_CS_CTRL_EN4    3
  82
  83 /* DTEST Digital Output: control */
  84 #define PM8XXX_MPP_DTEST_DBUS1          0
  85 #define PM8XXX_MPP_DTEST_DBUS2          1
  86 #define PM8XXX_MPP_DTEST_DBUS3          2
  87 #define PM8XXX_MPP_DTEST_DBUS4          3
  88
  89 /* custom pinconf parameters */
  90 #define PM8XXX_CONFIG_AMUX              (PIN_CONFIG_END + 1)
  91 #define PM8XXX_CONFIG_DTEST_SELECTOR    (PIN_CONFIG_END + 2)
  92 #define PM8XXX_CONFIG_ALEVEL            (PIN_CONFIG_END + 3)
  93 #define PM8XXX_CONFIG_PAIRED            (PIN_CONFIG_END + 4)
  94
  95 /**
  96  * struct pm8xxx_pin_data - dynamic configuration for a pin
  97  * @reg:                address of the control register
  98  * @irq:                IRQ from the PMIC interrupt controller
  99  * @mode:               operating mode for the pin (digital, analog or current sink)
 100  * @input:              pin is input
 101  * @output:             pin is output
 102  * @high_z:             pin is floating
 103  * @paired:             mpp operates in paired mode
 104  * @output_value:       logical output value of the mpp
 105  * @power_source:       selected power source
 106  * @dtest:              DTEST route selector
 107  * @amux:               input muxing in analog mode
 108  * @aout_level:         selector of the output in analog mode
 109  * @drive_strength:     drive strength of the current sink
 110  * @pullup:             pull up value, when in digital bidirectional mode
 111  */
 112 struct pm8xxx_pin_data {
 113         unsigned reg;
 114         int irq;
 115
 116         u8 mode;
 117
 118         bool input;
 119         bool output;
 120         bool high_z;
 121         bool paired;
 122         bool output_value;
 123
 124         u8 power_source;
 125         u8 dtest;
 126         u8 amux;
 127         u8 aout_level;
 128         u8 drive_strength;
 129         unsigned pullup;
 130 };
 131
 132 struct pm8xxx_mpp {
 133         struct device *dev;
 134         struct regmap *regmap;
 135         struct pinctrl_dev *pctrl;
 136         struct gpio_chip chip;
 137
 138         struct pinctrl_desc desc;
 139         unsigned npins;
 140 };
 141
 142 static const struct pinconf_generic_params pm8xxx_mpp_bindings[] = {
 143         {"qcom,amux-route",     PM8XXX_CONFIG_AMUX,             0},
 144         {"qcom,analog-level",   PM8XXX_CONFIG_ALEVEL,           0},
 145         {"qcom,dtest",          PM8XXX_CONFIG_DTEST_SELECTOR,   0},
 146         {"qcom,paired",         PM8XXX_CONFIG_PAIRED,           0},
 147 };
 148
 149 #ifdef CONFIG_DEBUG_FS
 150 static const struct pin_config_item pm8xxx_conf_items[] = {
 151         PCONFDUMP(PM8XXX_CONFIG_AMUX, "analog mux", NULL, true),
 152         PCONFDUMP(PM8XXX_CONFIG_ALEVEL, "analog level", NULL, true),
 153         PCONFDUMP(PM8XXX_CONFIG_DTEST_SELECTOR, "dtest", NULL, true),
 154         PCONFDUMP(PM8XXX_CONFIG_PAIRED, "paired", NULL, false),
 155 };
 156 #endif
 157
 158 #define PM8XXX_MAX_MPPS 12
 159 static const char * const pm8xxx_groups[PM8XXX_MAX_MPPS] = {
 160         "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8",
 161         "mpp9", "mpp10", "mpp11", "mpp12",
 162 };
 163
 164 #define PM8XXX_MPP_DIGITAL      0
 165 #define PM8XXX_MPP_ANALOG       1
 166 #define PM8XXX_MPP_SINK         2
 167
 168 static const char * const pm8xxx_mpp_functions[] = {
 169         "digital", "analog", "sink",
 170 };
 171
 172 static int pm8xxx_mpp_update(struct pm8xxx_mpp *pctrl,
 173                              struct pm8xxx_pin_data *pin)
 174 {
 175         unsigned level;
 176         unsigned ctrl;
 177         unsigned type;
 178         int ret;
 179         u8 val;
 180
 181         switch (pin->mode) {
 182         case PM8XXX_MPP_DIGITAL:
 183                 if (pin->dtest) {
 184                         type = PM8XXX_MPP_TYPE_DTEST_OUTPUT;
 185                         ctrl = pin->dtest - 1;
 186                 } else if (pin->input && pin->output) {
 187                         type = PM8XXX_MPP_TYPE_D_BI_DIR;
 188                         if (pin->high_z)
 189                                 ctrl = PM8XXX_MPP_BI_PULLUP_OPEN;
 190                         else if (pin->pullup == 600)
 191                                 ctrl = PM8XXX_MPP_BI_PULLUP_1KOHM;
 192                         else if (pin->pullup == 10000)
 193                                 ctrl = PM8XXX_MPP_BI_PULLUP_10KOHM;
 194                         else
 195                                 ctrl = PM8XXX_MPP_BI_PULLUP_30KOHM;
 196                 } else if (pin->input) {
 197                         type = PM8XXX_MPP_TYPE_D_INPUT;
 198                         if (pin->dtest)
 199                                 ctrl = pin->dtest;
 200                         else
 201                                 ctrl = PM8XXX_MPP_DIN_TO_INT;
 202                 } else {
 203                         type = PM8XXX_MPP_TYPE_D_OUTPUT;
 204                         ctrl = !!pin->output_value;
 205                         if (pin->paired)
 206                                 ctrl |= BIT(1);
 207                 }
 208
 209                 level = pin->power_source;
 210                 break;
 211         case PM8XXX_MPP_ANALOG:
 212                 if (pin->output) {
 213                         type = PM8XXX_MPP_TYPE_A_OUTPUT;
 214                         level = pin->aout_level;
 215                         ctrl = pin->output_value;
 216                         if (pin->paired)
 217                                 ctrl |= BIT(1);
 218                 } else {
 219                         type = PM8XXX_MPP_TYPE_A_INPUT;
 220                         level = pin->amux;
 221                         ctrl = 0;
 222                 }
 223                 break;
 224         case PM8XXX_MPP_SINK:
 225                 level = (pin->drive_strength / 5) - 1;
 226                 if (pin->dtest) {
 227                         type = PM8XXX_MPP_TYPE_DTEST_SINK;
 228                         ctrl = pin->dtest - 1;
 229                 } else {
 230                         type = PM8XXX_MPP_TYPE_SINK;
 231                         ctrl = pin->output_value;
 232                         if (pin->paired)
 233                                 ctrl |= BIT(1);
 234                 }
 235                 break;
 236         default:
 237                 return -EINVAL;
 238         }
 239
 240         val = type << 5 | level << 2 | ctrl;
 241         ret = regmap_write(pctrl->regmap, pin->reg, val);
 242         if (ret)
 243                 dev_err(pctrl->dev, "failed to write register\n");
 244
 245         return ret;
 246 }
 247
 248 static int pm8xxx_get_groups_count(struct pinctrl_dev *pctldev)
 249 {
 250         struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
 251
 252         return pctrl->npins;
 253 }
 254
 255 static const char *pm8xxx_get_group_name(struct pinctrl_dev *pctldev,
 256                                          unsigned group)
 257 {
 258         return pm8xxx_groups[group];
 259 }
 260
 261
 262 static int pm8xxx_get_group_pins(struct pinctrl_dev *pctldev,
 263                                  unsigned group,
 264                                  const unsigned **pins,
 265                                  unsigned *num_pins)
 266 {
 267         struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
 268
 269         *pins = &pctrl->desc.pins[group].number;
 270         *num_pins = 1;
 271
 272         return 0;
 273 }
 274
 275 static const struct pinctrl_ops pm8xxx_pinctrl_ops = {
 276         .get_groups_count       = pm8xxx_get_groups_count,
 277         .get_group_name         = pm8xxx_get_group_name,
 278         .get_group_pins         = pm8xxx_get_group_pins,
 279         .dt_node_to_map         = pinconf_generic_dt_node_to_map_group,
 280         .dt_free_map            = pinctrl_utils_free_map,
 281 };
 282
 283 static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev)
 284 {
 285         return ARRAY_SIZE(pm8xxx_mpp_functions);
 286 }
 287
 288 static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev,
 289                                             unsigned function)
 290 {
 291         return pm8xxx_mpp_functions[function];
 292 }
 293
 294 static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev,
 295                                       unsigned function,
 296                                       const char * const **groups,
 297                                       unsigned * const num_groups)
 298 {
 299         struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
 300
 301         *groups = pm8xxx_groups;
 302         *num_groups = pctrl->npins;
 303         return 0;
 304 }
 305
 306 static int pm8xxx_pinmux_set_mux(struct pinctrl_dev *pctldev,
 307                                  unsigned function,
 308                                  unsigned group)
 309 {
 310         struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
 311         struct pm8xxx_pin_data *pin = pctrl->desc.pins[group].drv_data;
 312
 313         pin->mode = function;
 314         pm8xxx_mpp_update(pctrl, pin);
 315
 316         return 0;
 317 }
 318
 319 static const struct pinmux_ops pm8xxx_pinmux_ops = {
 320         .get_functions_count    = pm8xxx_get_functions_count,
 321         .get_function_name      = pm8xxx_get_function_name,
 322         .get_function_groups    = pm8xxx_get_function_groups,
 323         .set_mux                = pm8xxx_pinmux_set_mux,
 324 };
 325
 326 static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
 327                                  unsigned int offset,
 328                                  unsigned long *config)
 329 {
 330         struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
 331         struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
 332         unsigned param = pinconf_to_config_param(*config);
 333         unsigned arg;
 334
 335         switch (param) {
 336         case PIN_CONFIG_BIAS_PULL_UP:
 337                 arg = pin->pullup;
 338                 break;
 339         case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
 340                 arg = pin->high_z;
 341                 break;
 342         case PIN_CONFIG_INPUT_ENABLE:
 343                 arg = pin->input;
 344                 break;
 345         case PIN_CONFIG_OUTPUT:
 346                 arg = pin->output_value;
 347                 break;
 348         case PIN_CONFIG_POWER_SOURCE:
 349                 arg = pin->power_source;
 350                 break;
 351         case PIN_CONFIG_DRIVE_STRENGTH:
 352                 arg = pin->drive_strength;
 353                 break;
 354         case PM8XXX_CONFIG_DTEST_SELECTOR:
 355                 arg = pin->dtest;
 356                 break;
 357         case PM8XXX_CONFIG_AMUX:
 358                 arg = pin->amux;
 359                 break;
 360         case PM8XXX_CONFIG_ALEVEL:
 361                 arg = pin->aout_level;
 362                 break;
 363         case PM8XXX_CONFIG_PAIRED:
 364                 arg = pin->paired;
 365                 break;
 366         default:
 367                 return -EINVAL;
 368         }
 369
 370         *config = pinconf_to_config_packed(param, arg);
 371
 372         return 0;
 373 }
 374
 375 static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev,
 376                                  unsigned int offset,
 377                                  unsigned long *configs,
 378                                  unsigned num_configs)
 379 {
 380         struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
 381         struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
 382         unsigned param;
 383         unsigned arg;
 384         unsigned i;
 385
 386         for (i = 0; i < num_configs; i++) {
 387                 param = pinconf_to_config_param(configs[i]);
 388                 arg = pinconf_to_config_argument(configs[i]);
 389
 390                 switch (param) {
 391                 case PIN_CONFIG_BIAS_PULL_UP:
 392                         pin->pullup = arg;
 393                         break;
 394                 case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
 395                         pin->high_z = true;
 396                         break;
 397                 case PIN_CONFIG_INPUT_ENABLE:
 398                         pin->input = true;
 399                         break;
 400                 case PIN_CONFIG_OUTPUT:
 401                         pin->output = true;
 402                         pin->output_value = !!arg;
 403                         break;
 404                 case PIN_CONFIG_POWER_SOURCE:
 405                         pin->power_source = arg;
 406                         break;
 407                 case PIN_CONFIG_DRIVE_STRENGTH:
 408                         pin->drive_strength = arg;
 409                         break;
 410                 case PM8XXX_CONFIG_DTEST_SELECTOR:
 411                         pin->dtest = arg;
 412                         break;
 413                 case PM8XXX_CONFIG_AMUX:
 414                         pin->amux = arg;
 415                         break;
 416                 case PM8XXX_CONFIG_ALEVEL:
 417                         pin->aout_level = arg;
 418                         break;
 419                 case PM8XXX_CONFIG_PAIRED:
 420                         pin->paired = !!arg;
 421                         break;
 422                 default:
 423                         dev_err(pctrl->dev,
 424                                 "unsupported config parameter: %x\n",
 425                                 param);
 426                         return -EINVAL;
 427                 }
 428         }
 429
 430         pm8xxx_mpp_update(pctrl, pin);
 431
 432         return 0;
 433 }
 434
 435 static const struct pinconf_ops pm8xxx_pinconf_ops = {
 436         .is_generic = true,
 437         .pin_config_group_get = pm8xxx_pin_config_get,
 438         .pin_config_group_set = pm8xxx_pin_config_set,
 439 };
 440
 441 static struct pinctrl_desc pm8xxx_pinctrl_desc = {
 442         .name = "pm8xxx_mpp",
 443         .pctlops = &pm8xxx_pinctrl_ops,
 444         .pmxops = &pm8xxx_pinmux_ops,
 445         .confops = &pm8xxx_pinconf_ops,
 446         .owner = THIS_MODULE,
 447 };
 448
 449 static int pm8xxx_mpp_direction_input(struct gpio_chip *chip,
 450                                        unsigned offset)
 451 {
 452         struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
 453         struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
 454
 455         switch (pin->mode) {
 456         case PM8XXX_MPP_DIGITAL:
 457                 pin->input = true;
 458                 break;
 459         case PM8XXX_MPP_ANALOG:
 460                 pin->input = true;
 461                 pin->output = true;
 462                 break;
 463         case PM8XXX_MPP_SINK:
 464                 return -EINVAL;
 465         }
 466
 467         pm8xxx_mpp_update(pctrl, pin);
 468
 469         return 0;
 470 }
 471
 472 static int pm8xxx_mpp_direction_output(struct gpio_chip *chip,
 473                                         unsigned offset,
 474                                         int value)
 475 {
 476         struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
 477         struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
 478
 479         switch (pin->mode) {
 480         case PM8XXX_MPP_DIGITAL:
 481                 pin->output = true;
 482                 break;
 483         case PM8XXX_MPP_ANALOG:
 484                 pin->input = false;
 485                 pin->output = true;
 486                 break;
 487         case PM8XXX_MPP_SINK:
 488                 pin->input = false;
 489                 pin->output = true;
 490                 break;
 491         }
 492
 493         pm8xxx_mpp_update(pctrl, pin);
 494
 495         return 0;
 496 }
 497
 498 static int pm8xxx_mpp_get(struct gpio_chip *chip, unsigned offset)
 499 {
 500         struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
 501         struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
 502         bool state;
 503         int ret;
 504
 505         if (!pin->input)
 506                 return !!pin->output_value;
 507
 508         ret = irq_get_irqchip_state(pin->irq, IRQCHIP_STATE_LINE_LEVEL, &state);
 509         if (!ret)
 510                 ret = !!state;
 511
 512         return ret;
 513 }
 514
 515 static void pm8xxx_mpp_set(struct gpio_chip *chip, unsigned offset, int value)
 516 {
 517         struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
 518         struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
 519
 520         pin->output_value = !!value;
 521
 522         pm8xxx_mpp_update(pctrl, pin);
 523 }
 524
 525 static int pm8xxx_mpp_of_xlate(struct gpio_chip *chip,
 526                                 const struct of_phandle_args *gpio_desc,
 527                                 u32 *flags)
 528 {
 529         if (chip->of_gpio_n_cells < 2)
 530                 return -EINVAL;
 531
 532         if (flags)
 533                 *flags = gpio_desc->args[1];
 534
 535         return gpio_desc->args[0] - 1;
 536 }
 537
 538
 539 static int pm8xxx_mpp_to_irq(struct gpio_chip *chip, unsigned offset)
 540 {
 541         struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
 542         struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
 543
 544         return pin->irq;
 545 }
 546
 547 #ifdef CONFIG_DEBUG_FS
 548 #include <linux/seq_file.h>
 549
 550 static void pm8xxx_mpp_dbg_show_one(struct seq_file *s,
 551                                   struct pinctrl_dev *pctldev,
 552                                   struct gpio_chip *chip,
 553                                   unsigned offset,
 554                                   unsigned gpio)
 555 {
 556         struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
 557         struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
 558
 559         static const char * const aout_lvls[] = {
 560                 "1v25", "1v25_2", "0v625", "0v3125", "mpp", "abus1", "abus2",
 561                 "abus3"
 562         };
 563
 564         static const char * const amuxs[] = {
 565                 "amux5", "amux6", "amux7", "amux8", "amux9", "abus1", "abus2",
 566                 "abus3",
 567         };
 568
 569         seq_printf(s, " mpp%-2d:", offset + 1);
 570
 571         switch (pin->mode) {
 572         case PM8XXX_MPP_DIGITAL:
 573                 seq_puts(s, " digital ");
 574                 if (pin->dtest) {
 575                         seq_printf(s, "dtest%d\n", pin->dtest);
 576                 } else if (pin->input && pin->output) {
 577                         if (pin->high_z)
 578                                 seq_puts(s, "bi-dir high-z");
 579                         else
 580                                 seq_printf(s, "bi-dir %dOhm", pin->pullup);
 581                 } else if (pin->input) {
 582                         if (pin->dtest)
 583                                 seq_printf(s, "in dtest%d", pin->dtest);
 584                         else
 585                                 seq_puts(s, "in gpio");
 586                 } else if (pin->output) {
 587                         seq_puts(s, "out ");
 588
 589                         if (!pin->paired) {
 590                                 seq_puts(s, pin->output_value ?
 591                                          "high" : "low");
 592                         } else {
 593                                 seq_puts(s, pin->output_value ?
 594                                          "inverted" : "follow");
 595                         }
 596                 }
 597                 break;
 598         case PM8XXX_MPP_ANALOG:
 599                 seq_puts(s, " analog ");
 600                 if (pin->output) {
 601                         seq_printf(s, "out %s ", aout_lvls[pin->aout_level]);
 602                         if (!pin->paired) {
 603                                 seq_puts(s, pin->output_value ?
 604                                          "high" : "low");
 605                         } else {
 606                                 seq_puts(s, pin->output_value ?
 607                                          "inverted" : "follow");
 608                         }
 609                 } else {
 610                         seq_printf(s, "input mux %s", amuxs[pin->amux]);
 611                 }
 612                 break;
 613         case PM8XXX_MPP_SINK:
 614                 seq_printf(s, " sink %dmA ", pin->drive_strength);
 615                 if (pin->dtest) {
 616                         seq_printf(s, "dtest%d", pin->dtest);
 617                 } else {
 618                         if (!pin->paired) {
 619                                 seq_puts(s, pin->output_value ?
 620                                          "high" : "low");
 621                         } else {
 622                                 seq_puts(s, pin->output_value ?
 623                                          "inverted" : "follow");
 624                         }
 625                 }
 626                 break;
 627         }
 628
 629 }
 630
 631 static void pm8xxx_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 632 {
 633         unsigned gpio = chip->base;
 634         unsigned i;
 635
 636         for (i = 0; i < chip->ngpio; i++, gpio++) {
 637                 pm8xxx_mpp_dbg_show_one(s, NULL, chip, i, gpio);
 638                 seq_puts(s, "\n");
 639         }
 640 }
 641
 642 #else
 643 #define pm8xxx_mpp_dbg_show NULL
 644 #endif
 645
 646 static struct gpio_chip pm8xxx_mpp_template = {
 647         .direction_input = pm8xxx_mpp_direction_input,
 648         .direction_output = pm8xxx_mpp_direction_output,
 649         .get = pm8xxx_mpp_get,
 650         .set = pm8xxx_mpp_set,
 651         .of_xlate = pm8xxx_mpp_of_xlate,
 652         .to_irq = pm8xxx_mpp_to_irq,
 653         .dbg_show = pm8xxx_mpp_dbg_show,
 654         .owner = THIS_MODULE,
 655 };
 656
 657 static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl,
 658                                struct pm8xxx_pin_data *pin)
 659 {
 660         unsigned int val;
 661         unsigned level;
 662         unsigned ctrl;
 663         unsigned type;
 664         int ret;
 665
 666         ret = regmap_read(pctrl->regmap, pin->reg, &val);
 667         if (ret) {
 668                 dev_err(pctrl->dev, "failed to read register\n");
 669                 return ret;
 670         }
 671
 672         type = (val >> 5) & 7;
 673         level = (val >> 2) & 7;
 674         ctrl = (val) & 3;
 675
 676         switch (type) {
 677         case PM8XXX_MPP_TYPE_D_INPUT:
 678                 pin->mode = PM8XXX_MPP_DIGITAL;
 679                 pin->input = true;
 680                 pin->power_source = level;
 681                 pin->dtest = ctrl;
 682                 break;
 683         case PM8XXX_MPP_TYPE_D_OUTPUT:
 684                 pin->mode = PM8XXX_MPP_DIGITAL;
 685                 pin->output = true;
 686                 pin->power_source = level;
 687                 pin->output_value = !!(ctrl & BIT(0));
 688                 pin->paired = !!(ctrl & BIT(1));
 689                 break;
 690         case PM8XXX_MPP_TYPE_D_BI_DIR:
 691                 pin->mode = PM8XXX_MPP_DIGITAL;
 692                 pin->input = true;
 693                 pin->output = true;
 694                 pin->power_source = level;
 695                 switch (ctrl) {
 696                 case PM8XXX_MPP_BI_PULLUP_1KOHM:
 697                         pin->pullup = 600;
 698                         break;
 699                 case PM8XXX_MPP_BI_PULLUP_OPEN:
 700                         pin->high_z = true;
 701                         break;
 702                 case PM8XXX_MPP_BI_PULLUP_10KOHM:
 703                         pin->pullup = 10000;
 704                         break;
 705                 case PM8XXX_MPP_BI_PULLUP_30KOHM:
 706                         pin->pullup = 30000;
 707                         break;
 708                 }
 709                 break;
 710         case PM8XXX_MPP_TYPE_A_INPUT:
 711                 pin->mode = PM8XXX_MPP_ANALOG;
 712                 pin->input = true;
 713                 pin->amux = level;
 714                 break;
 715         case PM8XXX_MPP_TYPE_A_OUTPUT:
 716                 pin->mode = PM8XXX_MPP_ANALOG;
 717                 pin->output = true;
 718                 pin->aout_level = level;
 719                 pin->output_value = !!(ctrl & BIT(0));
 720                 pin->paired = !!(ctrl & BIT(1));
 721                 break;
 722         case PM8XXX_MPP_TYPE_SINK:
 723                 pin->mode = PM8XXX_MPP_SINK;
 724                 pin->drive_strength = 5 * (level + 1);
 725                 pin->output_value = !!(ctrl & BIT(0));
 726                 pin->paired = !!(ctrl & BIT(1));
 727                 break;
 728         case PM8XXX_MPP_TYPE_DTEST_SINK:
 729                 pin->mode = PM8XXX_MPP_SINK;
 730                 pin->dtest = ctrl + 1;
 731                 pin->drive_strength = 5 * (level + 1);
 732                 break;
 733         case PM8XXX_MPP_TYPE_DTEST_OUTPUT:
 734                 pin->mode = PM8XXX_MPP_DIGITAL;
 735                 pin->power_source = level;
 736                 if (ctrl >= 1)
 737                         pin->dtest = ctrl;
 738                 break;
 739         }
 740
 741         return 0;
 742 }
 743
 744 static const struct of_device_id pm8xxx_mpp_of_match[] = {
 745         { .compatible = "qcom,pm8018-mpp" },
 746         { .compatible = "qcom,pm8038-mpp" },
 747         { .compatible = "qcom,pm8058-mpp" },
 748         { .compatible = "qcom,pm8917-mpp" },
 749         { .compatible = "qcom,pm8821-mpp" },
 750         { .compatible = "qcom,pm8921-mpp" },
 751         { .compatible = "qcom,ssbi-mpp" },
 752         { },
 753 };
 754 MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match);
 755
 756 static int pm8xxx_mpp_probe(struct platform_device *pdev)
 757 {
 758         struct pm8xxx_pin_data *pin_data;
 759         struct pinctrl_pin_desc *pins;
 760         struct pm8xxx_mpp *pctrl;
 761         int ret;
 762         int i, npins;
 763
 764         pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
 765         if (!pctrl)
 766                 return -ENOMEM;
 767
 768         pctrl->dev = &pdev->dev;
 769         npins = platform_irq_count(pdev);
 770         if (!npins)
 771                 return -EINVAL;
 772         if (npins < 0)
 773                 return npins;
 774         pctrl->npins = npins;
 775
 776         pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 777         if (!pctrl->regmap) {
 778                 dev_err(&pdev->dev, "parent regmap unavailable\n");
 779                 return -ENXIO;
 780         }
 781
 782         pctrl->desc = pm8xxx_pinctrl_desc;
 783         pctrl->desc.npins = pctrl->npins;
 784
 785         pins = devm_kcalloc(&pdev->dev,
 786                             pctrl->desc.npins,
 787                             sizeof(struct pinctrl_pin_desc),
 788                             GFP_KERNEL);
 789         if (!pins)
 790                 return -ENOMEM;
 791
 792         pin_data = devm_kcalloc(&pdev->dev,
 793                                 pctrl->desc.npins,
 794                                 sizeof(struct pm8xxx_pin_data),
 795                                 GFP_KERNEL);
 796         if (!pin_data)
 797                 return -ENOMEM;
 798
 799         for (i = 0; i < pctrl->desc.npins; i++) {
 800                 pin_data[i].reg = SSBI_REG_ADDR_MPP(i);
 801                 pin_data[i].irq = platform_get_irq(pdev, i);
 802                 if (pin_data[i].irq < 0) {
 803                         dev_err(&pdev->dev,
 804                                 "missing interrupts for pin %d\n", i);
 805                         return pin_data[i].irq;
 806                 }
 807
 808                 ret = pm8xxx_pin_populate(pctrl, &pin_data[i]);
 809                 if (ret)
 810                         return ret;
 811
 812                 pins[i].number = i;
 813                 pins[i].name = pm8xxx_groups[i];
 814                 pins[i].drv_data = &pin_data[i];
 815         }
 816         pctrl->desc.pins = pins;
 817
 818         pctrl->desc.num_custom_params = ARRAY_SIZE(pm8xxx_mpp_bindings);
 819         pctrl->desc.custom_params = pm8xxx_mpp_bindings;
 820 #ifdef CONFIG_DEBUG_FS
 821         pctrl->desc.custom_conf_items = pm8xxx_conf_items;
 822 #endif
 823
 824         pctrl->pctrl = devm_pinctrl_register(&pdev->dev, &pctrl->desc, pctrl);
 825         if (IS_ERR(pctrl->pctrl)) {
 826                 dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n");
 827                 return PTR_ERR(pctrl->pctrl);
 828         }
 829
 830         pctrl->chip = pm8xxx_mpp_template;
 831         pctrl->chip.base = -1;
 832         pctrl->chip.parent = &pdev->dev;
 833         pctrl->chip.of_node = pdev->dev.of_node;
 834         pctrl->chip.of_gpio_n_cells = 2;
 835         pctrl->chip.label = dev_name(pctrl->dev);
 836         pctrl->chip.ngpio = pctrl->npins;
 837         ret = gpiochip_add_data(&pctrl->chip, pctrl);
 838         if (ret) {
 839                 dev_err(&pdev->dev, "failed register gpiochip\n");
 840                 return ret;
 841         }
 842
 843         ret = gpiochip_add_pin_range(&pctrl->chip,
 844                                      dev_name(pctrl->dev),
 845                                      0, 0, pctrl->chip.ngpio);
 846         if (ret) {
 847                 dev_err(pctrl->dev, "failed to add pin range\n");
 848                 goto unregister_gpiochip;
 849         }
 850
 851         platform_set_drvdata(pdev, pctrl);
 852
 853         dev_dbg(&pdev->dev, "Qualcomm pm8xxx mpp driver probed\n");
 854
 855         return 0;
 856
 857 unregister_gpiochip:
 858         gpiochip_remove(&pctrl->chip);
 859
 860         return ret;
 861 }
 862
 863 static int pm8xxx_mpp_remove(struct platform_device *pdev)
 864 {
 865         struct pm8xxx_mpp *pctrl = platform_get_drvdata(pdev);
 866
 867         gpiochip_remove(&pctrl->chip);
 868
 869         return 0;
 870 }
 871
 872 static struct platform_driver pm8xxx_mpp_driver = {
 873         .driver = {
 874                 .name = "qcom-ssbi-mpp",
 875                 .of_match_table = pm8xxx_mpp_of_match,
 876         },
 877         .probe = pm8xxx_mpp_probe,
 878         .remove = pm8xxx_mpp_remove,
 879 };
 880
 881 module_platform_driver(pm8xxx_mpp_driver);
 882
 883 MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
 884 MODULE_DESCRIPTION("Qualcomm PM8xxx MPP driver");
 885 MODULE_LICENSE("GPL v2");