drivers/power/Kconfig

   1 menuconfig POWER_SUPPLY
   2         tristate "Power supply class support"
   3         help
   4           Say Y here to enable power supply class support. This allows
   5           power supply (batteries, AC, USB) monitoring by userspace
   6           via sysfs and uevent (if available) and/or APM kernel interface
   7           (if selected below).
   8
   9 if POWER_SUPPLY
  10
  11 config POWER_SUPPLY_DEBUG
  12         bool "Power supply debug"
  13         help
  14           Say Y here to enable debugging messages for power supply class
  15           and drivers.
  16
  17 config PDA_POWER
  18         tristate "Generic PDA/phone power driver"
  19         depends on !S390
  20         help
  21           Say Y here to enable generic power driver for PDAs and phones with
  22           one or two external power supplies (AC/USB) connected to main and
  23           backup batteries, and optional builtin charger.
  24
  25 config APM_POWER
  26         tristate "APM emulation for class batteries"
  27         depends on APM_EMULATION
  28         help
  29           Say Y here to enable support APM status emulation using
  30           battery class devices.
  31
  32 config MAX8925_POWER
  33         tristate "MAX8925 battery charger support"
  34         depends on MFD_MAX8925
  35         help
  36           Say Y here to enable support for the battery charger in the Maxim
  37           MAX8925 PMIC.
  38
  39 config WM831X_BACKUP
  40         tristate "WM831X backup battery charger support"
  41         depends on MFD_WM831X
  42         help
  43           Say Y here to enable support for the backup battery charger
  44           in the Wolfson Microelectronics WM831x PMICs.
  45
  46 config WM831X_POWER
  47         tristate "WM831X PMU support"
  48         depends on MFD_WM831X
  49         help
  50           Say Y here to enable support for the power management unit
  51           provided by Wolfson Microelectronics WM831x PMICs.
  52
  53 config WM8350_POWER
  54         tristate "WM8350 PMU support"
  55         depends on MFD_WM8350
  56         help
  57           Say Y here to enable support for the power management unit
  58           provided by the Wolfson Microelectronics WM8350 PMIC.
  59
  60 config TEST_POWER
  61         tristate "Test power driver"
  62         help
  63           This driver is used for testing. It's safe to say M here.
  64
  65 config BATTERY_DS2760
  66         tristate "DS2760 battery driver (HP iPAQ & others)"
  67         depends on W1 && W1_SLAVE_DS2760
  68         help
  69           Say Y here to enable support for batteries with ds2760 chip.
  70
  71 config BATTERY_DS2782
  72         tristate "DS2782/DS2786 standalone gas-gauge"
  73         depends on I2C
  74         help
  75           Say Y here to enable support for the DS2782/DS2786 standalone battery
  76           gas-gauge.
  77
  78 config BATTERY_PMU
  79         tristate "Apple PMU battery"
  80         depends on PPC32 && ADB_PMU
  81         help
  82           Say Y here to expose battery information on Apple machines
  83           through the generic battery class.
  84
  85 config BATTERY_OLPC
  86         tristate "One Laptop Per Child battery"
  87         depends on X86_32 && OLPC
  88         help
  89           Say Y to enable support for the battery on the OLPC laptop.
  90
  91 config BATTERY_TOSA
  92         tristate "Sharp SL-6000 (tosa) battery"
  93         depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
  94         help
  95           Say Y to enable support for the battery on the Sharp Zaurus
  96           SL-6000 (tosa) models.
  97
  98 config BATTERY_COLLIE
  99         tristate "Sharp SL-5500 (collie) battery"
 100         depends on SA1100_COLLIE && MCP_UCB1200
 101         help
 102           Say Y to enable support for the battery on the Sharp Zaurus
 103           SL-5500 (collie) models.
 104
 105 config BATTERY_WM97XX
 106         bool "WM97xx generic battery driver"
 107         depends on TOUCHSCREEN_WM97XX=y
 108         help
 109           Say Y to enable support for battery measured by WM97xx aux port.
 110
 111 config BATTERY_BQ20Z75
 112         tristate "TI BQ20z75 gas gauge"
 113         depends on I2C
 114         help
 115          Say Y to include support for TI BQ20z75 SBS-compliant
 116          gas gauge and protection IC.
 117
 118 config BATTERY_BQ27x00
 119         tristate "BQ27x00 battery driver"
 120         depends on I2C
 121         help
 122           Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
 123
 124 config BATTERY_DA9030
 125         tristate "DA9030 battery driver"
 126         depends on PMIC_DA903X
 127         help
 128           Say Y here to enable support for batteries charger integrated into
 129           DA9030 PMIC.
 130
 131 config BATTERY_MAX17040
 132         tristate "Maxim MAX17040 Fuel Gauge"
 133         depends on I2C
 134         help
 135           MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
 136           in handheld and portable equipment. The MAX17040 is configured
 137           to operate with a single lithium cell
 138
 139 config BATTERY_MAX17042
 140         tristate "Maxim MAX17042/8997/8966 Fuel Gauge"
 141         depends on I2C
 142         help
 143           MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
 144           in handheld and portable equipment. The MAX17042 is configured
 145           to operate with a single lithium cell. MAX8997 and MAX8966 are
 146           multi-function devices that include fuel gauages that are compatible
 147           with MAX17042.
 148
 149 config BATTERY_Z2
 150         tristate "Z2 battery driver"
 151         depends on I2C && MACH_ZIPIT2
 152         help
 153           Say Y to include support for the battery on the Zipit Z2.
 154
 155 config BATTERY_S3C_ADC
 156         tristate "Battery driver for Samsung ADC based monitoring"
 157         depends on S3C_ADC
 158         help
 159           Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
 160
 161 config CHARGER_PCF50633
 162         tristate "NXP PCF50633 MBC"
 163         depends on MFD_PCF50633
 164         help
 165          Say Y to include support for NXP PCF50633 Main Battery Charger.
 166
 167 config BATTERY_JZ4740
 168         tristate "Ingenic JZ4740 battery"
 169         depends on MACH_JZ4740
 170         depends on MFD_JZ4740_ADC
 171         help
 172           Say Y to enable support for the battery on Ingenic JZ4740 based
 173           boards.
 174
 175           This driver can be build as a module. If so, the module will be
 176           called jz4740-battery.
 177
 178 config BATTERY_INTEL_MID
 179         tristate "Battery driver for Intel MID platforms"
 180         depends on INTEL_SCU_IPC && SPI
 181         help
 182           Say Y here to enable the battery driver on Intel MID
 183           platforms.
 184
 185 config CHARGER_ISP1704
 186         tristate "ISP1704 USB Charger Detection"
 187         depends on USB_OTG_UTILS
 188         help
 189           Say Y to enable support for USB Charger Detection with
 190           ISP1707/ISP1704 USB transceivers.
 191
 192 config CHARGER_TWL4030
 193         tristate "OMAP TWL4030 BCI charger driver"
 194         depends on TWL4030_CORE
 195         help
 196           Say Y here to enable support for TWL4030 Battery Charge Interface.
 197
 198 config CHARGER_GPIO
 199         tristate "GPIO charger"
 200         depends on GPIOLIB
 201         help
 202           Say Y to include support for chargers which report their online status
 203           through a GPIO pin.
 204
 205           This driver can be build as a module. If so, the module will be
 206           called gpio-charger.
 207
 208 endif # POWER_SUPPLY