drivers/power/reset/Kconfig

   1 menuconfig POWER_RESET
   2         bool "Board level reset or power off"
   3         help
   4           Provides a number of drivers which either reset a complete board
   5           or shut it down, by manipulating the main power supply on the board.
   6
   7           Say Y here to enable board reset and power off
   8
   9 if POWER_RESET
  10
  11 config POWER_RESET_AS3722
  12         bool "ams AS3722 power-off driver"
  13         depends on MFD_AS3722
  14         help
  15           This driver supports turning off board via a ams AS3722 power-off.
  16
  17 config POWER_RESET_AT91_POWEROFF
  18         tristate "Atmel AT91 poweroff driver"
  19         depends on ARCH_AT91
  20         default SOC_AT91SAM9 || SOC_SAMA5
  21         help
  22           This driver supports poweroff for Atmel AT91SAM9 and SAMA5
  23           SoCs
  24
  25 config POWER_RESET_AT91_RESET
  26         tristate "Atmel AT91 reset driver"
  27         depends on ARCH_AT91
  28         default SOC_AT91SAM9 || SOC_SAMA5
  29         help
  30           This driver supports restart for Atmel AT91SAM9 and SAMA5
  31           SoCs
  32
  33 config POWER_RESET_AT91_SAMA5D2_SHDWC
  34         tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
  35         depends on ARCH_AT91 || COMPILE_TEST
  36         default SOC_SAMA5
  37         help
  38           This driver supports the alternate shutdown controller for some Atmel
  39           SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
  40
  41 config POWER_RESET_AXXIA
  42         bool "LSI Axxia reset driver"
  43         depends on ARCH_AXXIA
  44         help
  45           This driver supports restart for Axxia SoC.
  46
  47           Say Y if you have an Axxia family SoC.
  48
  49 config POWER_RESET_BRCMKONA
  50         bool "Broadcom Kona reset driver"
  51         depends on ARM || COMPILE_TEST
  52         default ARCH_BCM_MOBILE
  53         help
  54           This driver provides restart support for Broadcom Kona chips.
  55
  56           Say Y here if you have a Broadcom Kona-based board and you wish
  57           to have restart support.
  58
  59 config POWER_RESET_BRCMSTB
  60         bool "Broadcom STB reset driver"
  61         depends on ARM || MIPS || COMPILE_TEST
  62         depends on MFD_SYSCON
  63         default ARCH_BRCMSTB
  64         help
  65           This driver provides restart support for Broadcom STB boards.
  66
  67           Say Y here if you have a Broadcom STB board and you wish
  68           to have restart support.
  69
  70 config POWER_RESET_GPIO
  71         bool "GPIO power-off driver"
  72         depends on OF_GPIO
  73         help
  74           This driver supports turning off your board via a GPIO line.
  75           If your board needs a GPIO high/low to power down, say Y and
  76           create a binding in your devicetree.
  77
  78 config POWER_RESET_GPIO_RESTART
  79         bool "GPIO restart driver"
  80         depends on OF_GPIO
  81         help
  82           This driver supports restarting your board via a GPIO line.
  83           If your board needs a GPIO high/low to restart, say Y and
  84           create a binding in your devicetree.
  85
  86 config POWER_RESET_HISI
  87         bool "Hisilicon power-off driver"
  88         depends on ARCH_HISI
  89         help
  90           Reboot support for Hisilicon boards.
  91
  92 config POWER_RESET_IMX
  93         bool "IMX6 power-off driver"
  94         depends on POWER_RESET && SOC_IMX6
  95         help
  96           This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
  97           boards.If you want to use other pin to control external power,please
  98           say N here or disable in dts to make sure pm_power_off never be
  99           overwrote wrongly by this driver.
 100
 101 config POWER_RESET_MSM
 102         bool "Qualcomm MSM power-off driver"
 103         depends on ARCH_QCOM
 104         help
 105           Power off and restart support for Qualcomm boards.
 106
 107 config POWER_RESET_LTC2952
 108         bool "LTC2952 PowerPath power-off driver"
 109         depends on OF_GPIO
 110         help
 111           This driver supports an external powerdown trigger and board power
 112           down via the LTC2952. Bindings are made in the device tree.
 113
 114 config POWER_RESET_QNAP
 115         bool "QNAP power-off driver"
 116         depends on OF_GPIO && PLAT_ORION
 117         help
 118           This driver supports turning off QNAP NAS devices by sending
 119           commands to the microcontroller which controls the main power.
 120
 121           Say Y if you have a QNAP NAS.
 122
 123 config POWER_RESET_RESTART
 124         bool "Restart power-off driver"
 125         help
 126           Some boards don't actually have the ability to power off.
 127           Instead they restart, and u-boot holds the SoC until the
 128           user presses a key. u-boot then boots into Linux.
 129
 130 config POWER_RESET_ST
 131         bool "ST restart driver"
 132         depends on ARCH_STI
 133         help
 134           Reset support for STMicroelectronics boards.
 135
 136 config POWER_RESET_VERSATILE
 137         bool "ARM Versatile family reboot driver"
 138         depends on ARM
 139         depends on MFD_SYSCON
 140         depends on OF
 141         help
 142           Power off and restart support for ARM Versatile family of
 143           reference boards.
 144
 145 config POWER_RESET_VEXPRESS
 146         bool "ARM Versatile Express power-off and reset driver"
 147         depends on ARM || ARM64
 148         depends on VEXPRESS_CONFIG
 149         help
 150           Power off and reset support for the ARM Ltd. Versatile
 151           Express boards.
 152
 153 config POWER_RESET_XGENE
 154         bool "APM SoC X-Gene reset driver"
 155         depends on ARM64
 156         help
 157           Reboot support for the APM SoC X-Gene Eval boards.
 158
 159 config POWER_RESET_KEYSTONE
 160         bool "Keystone reset driver"
 161         depends on ARCH_KEYSTONE || COMPILE_TEST
 162         depends on HAS_IOMEM
 163         select MFD_SYSCON
 164         help
 165           Reboot support for the KEYSTONE SoCs.
 166
 167 config POWER_RESET_SYSCON
 168         bool "Generic SYSCON regmap reset driver"
 169         depends on OF
 170         depends on HAS_IOMEM
 171         select MFD_SYSCON
 172         help
 173           Reboot support for generic SYSCON mapped register reset.
 174
 175 config POWER_RESET_SYSCON_POWEROFF
 176         bool "Generic SYSCON regmap poweroff driver"
 177         depends on OF
 178         depends on HAS_IOMEM
 179         select MFD_SYSCON
 180         help
 181           Poweroff support for generic SYSCON mapped register poweroff.
 182
 183 config POWER_RESET_RMOBILE
 184         tristate "Renesas R-Mobile reset driver"
 185         depends on ARCH_RMOBILE || COMPILE_TEST
 186         depends on HAS_IOMEM
 187         help
 188           Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
 189
 190 config POWER_RESET_ZX
 191         tristate "ZTE SoCs reset driver"
 192         depends on ARCH_ZX || COMPILE_TEST
 193         depends on HAS_IOMEM
 194         help
 195           Reboot support for ZTE SoCs.
 196
 197 config REBOOT_MODE
 198         tristate
 199
 200 config SYSCON_REBOOT_MODE
 201         tristate "Generic SYSCON regmap reboot mode driver"
 202         depends on OF
 203         select REBOOT_MODE
 204         select MFD_SYSCON
 205         help
 206           Say y here will enable reboot mode driver. This will
 207           get reboot mode arguments and store it in SYSCON mapped
 208           register, then the bootloader can read it to take different
 209           action according to the mode.
 210
 211 endif
 212