drivers/power/reset/Kconfig

   1 menuconfig POWER_RESET
   2         bool "Board level reset or power off"
   3         help
   4           Provides a number of drivers which either reset a complete board
   5           or shut it down, by manipulating the main power supply on the board.
   6
   7           Say Y here to enable board reset and power off
   8
   9 if POWER_RESET
  10
  11 config POWER_RESET_AS3722
  12         bool "ams AS3722 power-off driver"
  13         depends on MFD_AS3722
  14         help
  15           This driver supports turning off board via a ams AS3722 power-off.
  16
  17 config POWER_RESET_AT91_POWEROFF
  18         bool "Atmel AT91 poweroff driver"
  19         depends on ARCH_AT91
  20         default SOC_AT91SAM9 || SOC_SAMA5
  21         help
  22           This driver supports poweroff for Atmel AT91SAM9 and SAMA5
  23           SoCs
  24
  25 config POWER_RESET_AT91_RESET
  26         bool "Atmel AT91 reset driver"
  27         depends on ARCH_AT91
  28         default SOC_AT91SAM9 || SOC_SAMA5
  29         help
  30           This driver supports restart for Atmel AT91SAM9 and SAMA5
  31           SoCs
  32
  33 config POWER_RESET_AXXIA
  34         bool "LSI Axxia reset driver"
  35         depends on ARCH_AXXIA
  36         help
  37           This driver supports restart for Axxia SoC.
  38
  39           Say Y if you have an Axxia family SoC.
  40
  41 config POWER_RESET_BRCMSTB
  42         bool "Broadcom STB reset driver"
  43         depends on ARM || MIPS || COMPILE_TEST
  44         depends on MFD_SYSCON
  45         default ARCH_BRCMSTB
  46         help
  47           This driver provides restart support for Broadcom STB boards.
  48
  49           Say Y here if you have a Broadcom STB board and you wish
  50           to have restart support.
  51
  52 config POWER_RESET_GPIO
  53         bool "GPIO power-off driver"
  54         depends on OF_GPIO
  55         help
  56           This driver supports turning off your board via a GPIO line.
  57           If your board needs a GPIO high/low to power down, say Y and
  58           create a binding in your devicetree.
  59
  60 config POWER_RESET_GPIO_RESTART
  61         bool "GPIO restart driver"
  62         depends on OF_GPIO
  63         help
  64           This driver supports restarting your board via a GPIO line.
  65           If your board needs a GPIO high/low to restart, say Y and
  66           create a binding in your devicetree.
  67
  68 config POWER_RESET_HISI
  69         bool "Hisilicon power-off driver"
  70         depends on ARCH_HISI
  71         help
  72           Reboot support for Hisilicon boards.
  73
  74 config POWER_RESET_IMX
  75         bool "IMX6 power-off driver"
  76         depends on POWER_RESET && SOC_IMX6
  77         help
  78           This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
  79           boards.If you want to use other pin to control external power,please
  80           say N here or disable in dts to make sure pm_power_off never be
  81           overwrote wrongly by this driver.
  82
  83 config POWER_RESET_MSM
  84         bool "Qualcomm MSM power-off driver"
  85         depends on ARCH_QCOM
  86         help
  87           Power off and restart support for Qualcomm boards.
  88
  89 config POWER_RESET_LTC2952
  90         bool "LTC2952 PowerPath power-off driver"
  91         depends on OF_GPIO
  92         help
  93           This driver supports an external powerdown trigger and board power
  94           down via the LTC2952. Bindings are made in the device tree.
  95
  96 config POWER_RESET_QNAP
  97         bool "QNAP power-off driver"
  98         depends on OF_GPIO && PLAT_ORION
  99         help
 100           This driver supports turning off QNAP NAS devices by sending
 101           commands to the microcontroller which controls the main power.
 102
 103           Say Y if you have a QNAP NAS.
 104
 105 config POWER_RESET_RESTART
 106         bool "Restart power-off driver"
 107         help
 108           Some boards don't actually have the ability to power off.
 109           Instead they restart, and u-boot holds the SoC until the
 110           user presses a key. u-boot then boots into Linux.
 111
 112 config POWER_RESET_ST
 113         bool "ST restart driver"
 114         depends on ARCH_STI
 115         help
 116           Reset support for STMicroelectronics boards.
 117
 118 config POWER_RESET_VERSATILE
 119         bool "ARM Versatile family reboot driver"
 120         depends on ARM
 121         depends on MFD_SYSCON
 122         depends on OF
 123         help
 124           Power off and restart support for ARM Versatile family of
 125           reference boards.
 126
 127 config POWER_RESET_VEXPRESS
 128         bool "ARM Versatile Express power-off and reset driver"
 129         depends on ARM || ARM64
 130         depends on VEXPRESS_CONFIG
 131         help
 132           Power off and reset support for the ARM Ltd. Versatile
 133           Express boards.
 134
 135 config POWER_RESET_XGENE
 136         bool "APM SoC X-Gene reset driver"
 137         depends on ARM64
 138         help
 139           Reboot support for the APM SoC X-Gene Eval boards.
 140
 141 config POWER_RESET_KEYSTONE
 142         bool "Keystone reset driver"
 143         depends on ARCH_KEYSTONE
 144         select MFD_SYSCON
 145         help
 146           Reboot support for the KEYSTONE SoCs.
 147
 148 config POWER_RESET_SYSCON
 149         bool "Generic SYSCON regmap reset driver"
 150         depends on OF
 151         select MFD_SYSCON
 152         help
 153           Reboot support for generic SYSCON mapped register reset.
 154
 155 config POWER_RESET_SYSCON_POWEROFF
 156         bool "Generic SYSCON regmap poweroff driver"
 157         depends on OF
 158         select MFD_SYSCON
 159         help
 160           Poweroff support for generic SYSCON mapped register poweroff.
 161
 162 config POWER_RESET_RMOBILE
 163         tristate "Renesas R-Mobile reset driver"
 164         depends on ARCH_RMOBILE || COMPILE_TEST
 165         depends on HAS_IOMEM
 166         help
 167           Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
 168
 169 endif
 170