drivers/regulator/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 menuconfig REGULATOR
   3         bool "Voltage and Current Regulator Support"
   4         select LINEAR_RANGES
   5         help
   6           Generic Voltage and Current Regulator support.
   7
   8           This framework is designed to provide a generic interface to voltage
   9           and current regulators within the Linux kernel. It's intended to
  10           provide voltage and current control to client or consumer drivers and
  11           also provide status information to user space applications through a
  12           sysfs interface.
  13
  14           The intention is to allow systems to dynamically control regulator
  15           output in order to save power and prolong battery life. This applies
  16           to both voltage regulators (where voltage output is controllable) and
  17           current sinks (where current output is controllable).
  18
  19           This framework safely compiles out if not selected so that client
  20           drivers can still be used in systems with no software controllable
  21           regulators.
  22
  23           If unsure, say no.
  24
  25
  26 if REGULATOR
  27
  28 config REGULATOR_DEBUG
  29         bool "Regulator debug support"
  30         help
  31           Say yes here to enable debugging support.
  32
  33 config REGULATOR_FIXED_VOLTAGE
  34         tristate "Fixed voltage regulator support"
  35         help
  36           This driver provides support for fixed voltage regulators,
  37           useful for systems which use a combination of software
  38           managed regulators and simple non-configurable regulators.
  39
  40 config REGULATOR_VIRTUAL_CONSUMER
  41         tristate "Virtual regulator consumer support"
  42         help
  43           This driver provides a virtual consumer for the voltage and
  44           current regulator API which provides sysfs controls for
  45           configuring the supplies requested.  This is mainly useful
  46           for test purposes.
  47
  48           If unsure, say no.
  49
  50 config REGULATOR_USERSPACE_CONSUMER
  51         tristate "Userspace regulator consumer support"
  52         help
  53           There are some classes of devices that are controlled entirely
  54           from user space. Userspace consumer driver provides ability to
  55           control power supplies for such devices.
  56
  57           If unsure, say no.
  58
  59 config REGULATOR_88PG86X
  60         tristate "Marvell 88PG86X voltage regulators"
  61         depends on I2C
  62         select REGMAP_I2C
  63         help
  64           This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
  65           They provide two I2C-controlled DC/DC step-down converters with
  66           sleep mode and separate enable pins.
  67
  68 config REGULATOR_88PM800
  69         tristate "Marvell 88PM800 Power regulators"
  70         depends on MFD_88PM800
  71         help
  72           This driver supports Marvell 88PM800 voltage regulator chips.
  73           It delivers digitally programmable output,
  74           the voltage is programmed via I2C interface.
  75           It's suitable to support PXA988 chips to control VCC_MAIN and
  76           various voltages.
  77
  78 config REGULATOR_88PM8607
  79         tristate "Marvell 88PM8607 Power regulators"
  80         depends on MFD_88PM860X=y
  81         help
  82           This driver supports 88PM8607 voltage regulator chips.
  83
  84 config REGULATOR_ACT8865
  85         tristate "Active-semi act8865 voltage regulator"
  86         depends on I2C
  87         depends on POWER_SUPPLY
  88         select REGMAP_I2C
  89         help
  90           This driver controls a active-semi act8865 voltage output
  91           regulator via I2C bus.
  92
  93 config REGULATOR_ACT8945A
  94         tristate "Active-semi ACT8945A voltage regulator"
  95         depends on MFD_ACT8945A
  96         help
  97           This driver controls a active-semi ACT8945A voltage regulator
  98           via I2C bus. The ACT8945A features three step-down DC/DC converters
  99           and four low-dropout linear regulators, along with a ActivePath
 100           battery charger.
 101
 102 config REGULATOR_AD5398
 103         tristate "Analog Devices AD5398/AD5821 regulators"
 104         depends on I2C
 105         help
 106           This driver supports AD5398 and AD5821 current regulator chips.
 107           If building into module, its name is ad5398.ko.
 108
 109 config REGULATOR_ANATOP
 110         tristate "Freescale i.MX on-chip ANATOP LDO regulators"
 111         depends on ARCH_MXC || COMPILE_TEST
 112         depends on MFD_SYSCON
 113         help
 114           Say y here to support Freescale i.MX on-chip ANATOP LDOs
 115           regulators. It is recommended that this option be
 116           enabled on i.MX6 platform.
 117
 118 config REGULATOR_AAT2870
 119         tristate "AnalogicTech AAT2870 Regulators"
 120         depends on MFD_AAT2870_CORE
 121         help
 122           If you have a AnalogicTech AAT2870 say Y to enable the
 123           regulator driver.
 124
 125 config REGULATOR_AB8500
 126         bool "ST-Ericsson AB8500 Power Regulators"
 127         depends on AB8500_CORE
 128         help
 129           This driver supports the regulators found on the ST-Ericsson mixed
 130           signal AB8500 PMIC
 131
 132 config REGULATOR_ARIZONA_LDO1
 133         tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
 134         depends on MFD_ARIZONA || MFD_MADERA
 135         depends on SND_SOC
 136         help
 137           Support for the LDO1 regulators found on Cirrus Logic Madera codecs
 138           and Wolfson Microelectronic Arizona codecs.
 139
 140 config REGULATOR_ARIZONA_MICSUPP
 141         tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
 142         depends on MFD_ARIZONA || MFD_MADERA
 143         depends on SND_SOC
 144         help
 145           Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
 146           and Wolfson Microelectronic Arizona codecs
 147           devices.
 148
 149 config REGULATOR_ARM_SCMI
 150         tristate "SCMI based regulator driver"
 151         depends on ARM_SCMI_PROTOCOL && OF
 152         help
 153           This adds the regulator driver support for ARM platforms using SCMI
 154           protocol for device voltage management.
 155           This driver uses SCMI Message Protocol driver to interact with the
 156           firmware providing the device Voltage functionality.
 157
 158 config REGULATOR_AS3711
 159         tristate "AS3711 PMIC"
 160         depends on MFD_AS3711
 161         help
 162           This driver provides support for the voltage regulators on the
 163           AS3711 PMIC
 164
 165 config REGULATOR_AS3722
 166         tristate "AMS AS3722 PMIC Regulators"
 167         depends on MFD_AS3722
 168         help
 169           This driver provides support for the voltage regulators on the
 170           AS3722 PMIC. This will enable support for all the software
 171           controllable DCDC/LDO regulators.
 172
 173 config REGULATOR_ATC260X
 174         tristate "Actions Semi ATC260x PMIC Regulators"
 175         depends on MFD_ATC260X
 176         help
 177           This driver provides support for the voltage regulators on the
 178           ATC260x PMICs. This will enable support for all the software
 179           controllable DCDC/LDO regulators.
 180
 181 config REGULATOR_AXP20X
 182         tristate "X-POWERS AXP20X PMIC Regulators"
 183         depends on MFD_AXP20X
 184         help
 185           This driver provides support for the voltage regulators on the
 186           AXP20X PMIC.
 187
 188 config REGULATOR_BCM590XX
 189         tristate "Broadcom BCM590xx PMU Regulators"
 190         depends on MFD_BCM590XX
 191         help
 192           This driver provides support for the voltage regulators on the
 193           BCM590xx PMUs. This will enable support for the software
 194           controllable LDO/Switching regulators.
 195
 196 config REGULATOR_BD71815
 197         tristate "ROHM BD71815 Power Regulator"
 198         depends on MFD_ROHM_BD71828
 199         select REGULATOR_ROHM
 200         help
 201           This driver supports voltage regulators on ROHM BD71815 PMIC.
 202           This will enable support for the software controllable buck
 203           and LDO regulators and a current regulator for LEDs.
 204
 205           This driver can also be built as a module. If so, the module
 206           will be called bd71815-regulator.
 207
 208 config REGULATOR_BD71828
 209         tristate "ROHM BD71828 Power Regulator"
 210         depends on MFD_ROHM_BD71828
 211         select REGULATOR_ROHM
 212         help
 213           This driver supports voltage regulators on ROHM BD71828 PMIC.
 214           This will enable support for the software controllable buck
 215           and LDO regulators.
 216
 217           This driver can also be built as a module. If so, the module
 218           will be called bd71828-regulator.
 219
 220 config REGULATOR_BD718XX
 221         tristate "ROHM BD71837 Power Regulator"
 222         depends on MFD_ROHM_BD718XX
 223         select REGULATOR_ROHM
 224         help
 225           This driver supports voltage regulators on ROHM BD71837 PMIC.
 226           This will enable support for the software controllable buck
 227           and LDO regulators.
 228
 229           This driver can also be built as a module. If so, the module
 230           will be called bd718x7-regulator.
 231
 232 config REGULATOR_BD9571MWV
 233         tristate "ROHM BD9571MWV Regulators"
 234         depends on MFD_BD9571MWV
 235         help
 236           This driver provides support for the voltage regulators on the
 237           ROHM BD9571MWV PMIC. This will enable support for the software
 238           controllable regulator and voltage sampling units.
 239
 240           This driver can also be built as a module. If so, the module
 241           will be called bd9571mwv-regulator.
 242
 243 config REGULATOR_BD957XMUF
 244         tristate "ROHM BD9576MUF and BD9573MUF Regulators"
 245         depends on MFD_ROHM_BD957XMUF
 246         help
 247           This driver supports voltage regulators on ROHM BD9576MUF and
 248           BD9573MUF PMICs.
 249
 250           This driver can also be built as a module. If so, the module
 251           will be called bd9576-regulator.
 252
 253 config REGULATOR_CPCAP
 254         tristate "Motorola CPCAP regulator"
 255         depends on MFD_CPCAP
 256         help
 257           Say y here for CPCAP regulator found on some Motorola phones
 258           and tablets such as Droid 4.
 259
 260 config REGULATOR_CROS_EC
 261         tristate "ChromeOS EC regulators"
 262         depends on CROS_EC && OF
 263         help
 264           This driver supports voltage regulators that is connected to ChromeOS
 265           EC and controlled through EC host commands.
 266
 267           This driver can also be built as a module. If so, the module
 268           will be called cros-ec-regulator.
 269
 270 config REGULATOR_DA903X
 271         tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 272         depends on PMIC_DA903X
 273         depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
 274         help
 275           Say y here to support the BUCKs and LDOs regulators found on
 276           Dialog Semiconductor DA9030/DA9034 PMIC.
 277
 278 config REGULATOR_DA9052
 279         tristate "Dialog Semiconductor DA9052/DA9053 regulators"
 280         depends on PMIC_DA9052
 281         help
 282           This driver supports the voltage regulators of DA9052-BC and
 283           DA9053-AA/Bx PMIC.
 284
 285 config REGULATOR_DA9055
 286         tristate "Dialog Semiconductor DA9055 regulators"
 287         depends on MFD_DA9055
 288         help
 289           Say y here to support the BUCKs and LDOs regulators found on
 290           Dialog Semiconductor DA9055 PMIC.
 291
 292           This driver can also be built as a module. If so, the module
 293           will be called da9055-regulator.
 294
 295 config REGULATOR_DA9062
 296         tristate "Dialog Semiconductor DA9061/62 regulators"
 297         depends on MFD_DA9062
 298         help
 299           Say y here to support the BUCKs and LDOs regulators found on
 300           DA9061 and DA9062 PMICs.
 301
 302           This driver can also be built as a module. If so, the module
 303           will be called da9062-regulator.
 304
 305 config REGULATOR_DA9063
 306         tristate "Dialog Semiconductor DA9063 regulators"
 307         depends on MFD_DA9063 && OF
 308         help
 309           Say y here to support the BUCKs and LDOs regulators found on
 310           DA9063 PMICs.
 311
 312           This driver can also be built as a module. If so, the module
 313           will be called da9063-regulator.
 314
 315 config REGULATOR_DA9121
 316         tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
 317         depends on I2C && OF
 318         select REGMAP_I2C
 319         help
 320           Say y here to support for the Dialog Semiconductor DA9121.  The
 321           DA9121 is a single channel dual-phase buck converter controlled
 322           through an I2C interface.
 323
 324           DA9121 Single-channel dual-phase 10A buck converter
 325           DA9130 Single-channel dual-phase 10A buck converter (Automotive)
 326           DA9217 Single-channel dual-phase  6A buck converter
 327           DA9122 Dual-channel single-phase  5A buck converter
 328           DA9131 Dual-channel single-phase  5A buck converter (Automotive)
 329           DA9220 Dual-channel single-phase  3A buck converter
 330           DA9132 Dual-channel single-phase  3A buck converter (Automotive)
 331
 332           This driver can also be built as a module. If so, the module
 333           will be called da9121-regulator.
 334
 335 config REGULATOR_DA9210
 336         tristate "Dialog Semiconductor DA9210 regulator"
 337         depends on I2C
 338         select REGMAP_I2C
 339         help
 340           Say y here to support for the Dialog Semiconductor DA9210.
 341           The DA9210 is a multi-phase synchronous step down
 342           converter 12A DC-DC Buck controlled through an I2C
 343           interface.
 344
 345 config REGULATOR_DA9211
 346         tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
 347         depends on I2C
 348         select REGMAP_I2C
 349         help
 350           Say y here to support for the Dialog Semiconductor DA9211/DA9212
 351           /DA9213/DA9214/DA9215.
 352           The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
 353           step down converter 12A or 16A DC-DC Buck controlled through an I2C
 354           interface.
 355
 356 config REGULATOR_DBX500_PRCMU
 357         bool
 358
 359 config REGULATOR_DB8500_PRCMU
 360         bool "ST-Ericsson DB8500 Voltage Domain Regulators"
 361         depends on MFD_DB8500_PRCMU
 362         select REGULATOR_DBX500_PRCMU
 363         help
 364           This driver supports the voltage domain regulators controlled by the
 365           DB8500 PRCMU
 366
 367 config REGULATOR_FAN53555
 368         tristate "Fairchild FAN53555 Regulator"
 369         depends on I2C
 370         select REGMAP_I2C
 371         help
 372           This driver supports Fairchild FAN53555 Digitally Programmable
 373           TinyBuck Regulator. The FAN53555 is a step-down switching voltage
 374           regulator that delivers a digitally programmable output from an
 375           input voltage supply of 2.5V to 5.5V. The output voltage is
 376           programmed through an I2C interface.
 377
 378 config REGULATOR_FAN53880
 379         tristate "Fairchild FAN53880 Regulator"
 380         depends on I2C && (OF || COMPILE_TEST)
 381         select REGMAP_I2C
 382         help
 383           This driver supports Fairchild (ON Semiconductor) FAN53880
 384           regulator. The regulator is a programmable power management IC
 385           (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
 386           and four LDO outputs.
 387
 388 config REGULATOR_GPIO
 389         tristate "GPIO regulator support"
 390         depends on GPIOLIB || COMPILE_TEST
 391         help
 392           This driver provides support for regulators that can be
 393           controlled via gpios.
 394           It is capable of supporting current and voltage regulators
 395           and the platform has to provide a mapping of GPIO-states
 396           to target volts/amps.
 397
 398 config REGULATOR_HI6421
 399         tristate "HiSilicon Hi6421 PMIC voltage regulator support"
 400         depends on MFD_HI6421_PMIC && OF
 401         help
 402           This driver provides support for the voltage regulators on the
 403           HiSilicon Hi6421 PMU / Codec IC.
 404           Hi6421 is a multi-function device which, on regulator part, provides
 405           21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
 406           of them come with support to either ECO (idle) or sleep mode.
 407
 408 config REGULATOR_HI6421V530
 409         tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
 410         depends on MFD_HI6421_PMIC && OF
 411         help
 412           This driver provides support for the voltage regulators on
 413           HiSilicon Hi6421v530 PMU / Codec IC.
 414           Hi6421v530 is a multi-function device which, on regulator part,
 415           provides 5 general purpose LDOs, and all of them come with support
 416           to either ECO (idle) or sleep mode.
 417
 418 config REGULATOR_HI655X
 419         tristate "Hisilicon HI655X PMIC regulators support"
 420         depends on ARCH_HISI || COMPILE_TEST
 421         depends on MFD_HI655X_PMIC && OF
 422         help
 423           This driver provides support for the voltage regulators of the
 424           Hisilicon Hi655x PMIC device.
 425
 426 config REGULATOR_HI6421V600
 427         tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
 428         depends on MFD_HI6421_SPMI && OF
 429         select REGMAP
 430         help
 431           This driver provides support for the voltage regulators on
 432           HiSilicon Hi6421v600 PMU / Codec IC.
 433           This is used on Kirin 3670 boards, like HiKey 970.
 434
 435 config REGULATOR_ISL9305
 436         tristate "Intersil ISL9305 regulator"
 437         depends on I2C
 438         select REGMAP_I2C
 439         help
 440           This driver supports ISL9305 voltage regulator chip.
 441
 442 config REGULATOR_ISL6271A
 443         tristate "Intersil ISL6271A Power regulator"
 444         depends on I2C
 445         help
 446           This driver supports ISL6271A voltage regulator chip.
 447
 448 config REGULATOR_LM363X
 449         tristate "TI LM363X voltage regulators"
 450         depends on MFD_TI_LMU
 451         help
 452           This driver supports LM3631, LM3632 and LM36274 voltage regulators for
 453           the LCD bias.
 454           One boost output voltage is configurable and always on.
 455           Other LDOs are used for the display module.
 456
 457 config REGULATOR_LOCHNAGAR
 458         tristate "Cirrus Logic Lochnagar regulator driver"
 459         depends on MFD_LOCHNAGAR
 460         help
 461           This enables regulator support on the Cirrus Logic Lochnagar audio
 462           development board.
 463
 464 config REGULATOR_LP3971
 465         tristate "National Semiconductors LP3971 PMIC regulator driver"
 466         depends on I2C
 467         help
 468          Say Y here to support the voltage regulators and convertors
 469          on National Semiconductors LP3971 PMIC
 470
 471 config REGULATOR_LP3972
 472         tristate "National Semiconductors LP3972 PMIC regulator driver"
 473         depends on I2C
 474         help
 475          Say Y here to support the voltage regulators and convertors
 476          on National Semiconductors LP3972 PMIC
 477
 478 config REGULATOR_LP872X
 479         tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
 480         depends on I2C
 481         select REGMAP_I2C
 482         help
 483           This driver supports LP8720/LP8725 PMIC
 484
 485 config REGULATOR_LP873X
 486         tristate "TI LP873X Power regulators"
 487         depends on MFD_TI_LP873X && OF
 488         help
 489           This driver supports LP873X voltage regulator chips. LP873X
 490           provides two step-down converters and two general-purpose LDO
 491           voltage regulators. It supports software based voltage control
 492           for different voltage domains
 493
 494 config REGULATOR_LP8755
 495         tristate "TI LP8755 High Performance PMU driver"
 496         depends on I2C
 497         select REGMAP_I2C
 498         help
 499           This driver supports LP8755 High Performance PMU driver. This
 500           chip contains six step-down DC/DC converters which can support
 501           9 mode multiphase configuration.
 502
 503 config REGULATOR_LP87565
 504         tristate "TI LP87565 Power regulators"
 505         depends on MFD_TI_LP87565 && OF
 506         help
 507           This driver supports LP87565 voltage regulator chips. LP87565
 508           provides four step-down converters. It supports software based
 509           voltage control for different voltage domains
 510
 511 config REGULATOR_LP8788
 512         tristate "TI LP8788 Power Regulators"
 513         depends on MFD_LP8788
 514         help
 515           This driver supports LP8788 voltage regulator chip.
 516
 517 config REGULATOR_LTC3589
 518         tristate "LTC3589 8-output voltage regulator"
 519         depends on I2C
 520         select REGMAP_I2C
 521         help
 522           This enables support for the LTC3589, LTC3589-1, and LTC3589-2
 523           8-output regulators controlled via I2C.
 524
 525 config REGULATOR_LTC3676
 526         tristate "LTC3676 8-output voltage regulator"
 527         depends on I2C
 528         select REGMAP_I2C
 529         help
 530           This enables support for the LTC3676
 531           8-output regulators controlled via I2C.
 532
 533 config REGULATOR_MAX14577
 534         tristate "Maxim 14577/77836 regulator"
 535         depends on MFD_MAX14577
 536         help
 537           This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
 538           The MAX14577 regulators include safeout LDO and charger current
 539           regulator. The MAX77836 has two additional LDOs.
 540
 541 config REGULATOR_MAX1586
 542         tristate "Maxim 1586/1587 voltage regulator"
 543         depends on I2C
 544         help
 545           This driver controls a Maxim 1586 or 1587 voltage output
 546           regulator via I2C bus. The provided regulator is suitable
 547           for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 548
 549 config REGULATOR_MAX77620
 550         tristate "Maxim 77620/MAX20024 voltage regulator"
 551         depends on MFD_MAX77620 || COMPILE_TEST
 552         help
 553           This driver controls Maxim MAX77620 voltage output regulator
 554           via I2C bus. The provided regulator is suitable for Tegra
 555           chip to control Step-Down DC-DC and LDOs. Say Y here to
 556           enable the regulator driver.
 557
 558 config REGULATOR_MAX77650
 559         tristate "Maxim MAX77650/77651 regulator support"
 560         depends on MFD_MAX77650 || COMPILE_TEST
 561         help
 562           Regulator driver for MAX77650/77651 PMIC from Maxim
 563           Semiconductor. This device has a SIMO with three independent
 564           power rails and an LDO.
 565
 566 config REGULATOR_MAX8649
 567         tristate "Maxim 8649 voltage regulator"
 568         depends on I2C
 569         select REGMAP_I2C
 570         help
 571           This driver controls a Maxim 8649 voltage output regulator via
 572           I2C bus.
 573
 574 config REGULATOR_MAX8660
 575         tristate "Maxim 8660/8661 voltage regulator"
 576         depends on I2C
 577         help
 578           This driver controls a Maxim 8660/8661 voltage output
 579           regulator via I2C bus.
 580
 581 config REGULATOR_MAX8893
 582         tristate "Maxim 8893 voltage regulator"
 583         depends on I2C
 584         select REGMAP_I2C
 585         help
 586           This driver controls a Maxim 8893 voltage output
 587           regulator via I2C bus.
 588
 589 config REGULATOR_MAX8907
 590         tristate "Maxim 8907 voltage regulator"
 591         depends on MFD_MAX8907 || COMPILE_TEST
 592         help
 593           This driver controls a Maxim 8907 voltage output regulator
 594           via I2C bus. The provided regulator is suitable for Tegra
 595           chip to control Step-Down DC-DC and LDOs.
 596
 597 config REGULATOR_MAX8925
 598         tristate "Maxim MAX8925 Power Management IC"
 599         depends on MFD_MAX8925
 600         help
 601           Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
 602
 603 config REGULATOR_MAX8952
 604         tristate "Maxim MAX8952 Power Management IC"
 605         depends on I2C
 606         help
 607           This driver controls a Maxim 8952 voltage output regulator
 608           via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
 609           modes ranging from 0.77V to 1.40V by 0.01V steps.
 610
 611 config REGULATOR_MAX8973
 612         tristate "Maxim MAX8973 voltage regulator "
 613         depends on I2C
 614         depends on THERMAL && THERMAL_OF
 615         select REGMAP_I2C
 616         help
 617           The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
 618           switching regulator delivers up to 9A of output current. Each
 619           phase operates at a 2MHz fixed frequency with a 120 deg shift
 620           from the adjacent phase, allowing the use of small magnetic component.
 621
 622 config REGULATOR_MAX8997
 623         tristate "Maxim 8997/8966 regulator"
 624         depends on MFD_MAX8997
 625         help
 626           This driver controls a Maxim 8997/8966 regulator
 627           via I2C bus. The provided regulator is suitable for S5PC110,
 628           S5PV210, and Exynos-4 chips to control VCC_CORE and
 629           VCC_USIM voltages.
 630
 631 config REGULATOR_MAX8998
 632         tristate "Maxim 8998 voltage regulator"
 633         depends on MFD_MAX8998
 634         help
 635           This driver controls a Maxim 8998 voltage output regulator
 636           via I2C bus. The provided regulator is suitable for S3C6410
 637           and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
 638
 639 config REGULATOR_MAX77686
 640         tristate "Maxim 77686 regulator"
 641         depends on MFD_MAX77686 || COMPILE_TEST
 642         help
 643           This driver controls a Maxim 77686 regulator
 644           via I2C bus. The provided regulator is suitable for
 645           Exynos-4 chips to control VARM and VINT voltages.
 646
 647 config REGULATOR_MAX77693
 648         tristate "Maxim 77693/77843 regulator"
 649         depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
 650         help
 651           This driver controls a Maxim 77693/77843 regulators via I2C bus.
 652           The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
 653           and one current regulator 'CHARGER'. This is suitable for
 654           Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
 655
 656 config REGULATOR_MAX77802
 657         tristate "Maxim 77802 regulator"
 658         depends on MFD_MAX77686 || COMPILE_TEST
 659         help
 660           This driver controls a Maxim 77802 regulator
 661           via I2C bus. The provided regulator is suitable for
 662           Exynos5420/Exynos5800 SoCs to control various voltages.
 663           It includes support for control of voltage and ramp speed.
 664
 665 config REGULATOR_MAX77826
 666         tristate "Maxim 77826 regulator"
 667         depends on I2C
 668         select REGMAP_I2C
 669         help
 670           This driver controls a Maxim 77826 regulator via I2C bus.
 671           The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
 672           It includes support for control of output voltage. This
 673           regulator is found on the Samsung Galaxy S5 (klte) smartphone.
 674
 675 config REGULATOR_MC13XXX_CORE
 676         tristate
 677
 678 config REGULATOR_MC13783
 679         tristate "Freescale MC13783 regulator driver"
 680         depends on MFD_MC13XXX
 681         select REGULATOR_MC13XXX_CORE
 682         help
 683           Say y here to support the regulators found on the Freescale MC13783
 684           PMIC.
 685
 686 config REGULATOR_MC13892
 687         tristate "Freescale MC13892 regulator driver"
 688         depends on MFD_MC13XXX
 689         select REGULATOR_MC13XXX_CORE
 690         help
 691           Say y here to support the regulators found on the Freescale MC13892
 692           PMIC.
 693
 694 config REGULATOR_MCP16502
 695         tristate "Microchip MCP16502 PMIC"
 696         depends on I2C && OF
 697         select REGMAP_I2C
 698         help
 699           Say y here to support the MCP16502 PMIC. This driver supports
 700           basic operations (get/set voltage, get/set operating mode)
 701           through the regulator interface. In addition it enables
 702           suspend-to-ram/standby transition.
 703
 704 config REGULATOR_MP5416
 705         tristate "Monolithic MP5416 PMIC"
 706         depends on I2C && OF
 707         select REGMAP_I2C
 708         help
 709           Say y here to support the MP5416 PMIC. This will enable supports
 710           the software controllable 4 buck and 4 LDO regulators.
 711           Say M here if you want to include support for the regulator as a
 712           module.
 713
 714 config REGULATOR_MP8859
 715         tristate "MPS MP8859 regulator driver"
 716         depends on I2C
 717         select REGMAP_I2C
 718         help
 719           Say y here to support the MP8859 voltage regulator. This driver
 720           supports basic operations (get/set voltage) through the regulator
 721           interface.
 722           Say M here if you want to include support for the regulator as a
 723           module. The module will be named "mp8859".
 724
 725 config REGULATOR_MP886X
 726         tristate "MPS MP8869 regulator driver"
 727         depends on I2C && (OF || COMPILE_TEST)
 728         select REGMAP_I2C
 729         help
 730           This driver supports the MP8869 voltage regulator.
 731
 732 config REGULATOR_MPQ7920
 733         tristate "Monolithic MPQ7920 PMIC"
 734         depends on I2C && OF
 735         select REGMAP_I2C
 736         help
 737           Say y here to support the MPQ7920 PMIC. This will enable supports
 738           the software controllable 4 buck and 5 LDO regulators.
 739           This driver supports the control of different power rails of device
 740           through regulator interface.
 741
 742 config REGULATOR_MT6311
 743         tristate "MediaTek MT6311 PMIC"
 744         depends on I2C
 745         select REGMAP_I2C
 746         help
 747           Say y here to select this option to enable the power regulator of
 748           MediaTek MT6311 PMIC.
 749           This driver supports the control of different power rails of device
 750           through regulator interface.
 751
 752 config REGULATOR_MT6315
 753         tristate "MediaTek MT6315 PMIC"
 754         depends on SPMI
 755         select REGMAP_SPMI
 756         help
 757           Say y here to select this option to enable the power regulator of
 758           MediaTek MT6315 PMIC.
 759           This driver supports the control of different power rails of device
 760           through regulator interface.
 761
 762 config REGULATOR_MT6323
 763         tristate "MediaTek MT6323 PMIC"
 764         depends on MFD_MT6397
 765         help
 766           Say y here to select this option to enable the power regulator of
 767           MediaTek MT6323 PMIC.
 768           This driver supports the control of different power rails of device
 769           through regulator interface.
 770
 771 config REGULATOR_MT6358
 772         tristate "MediaTek MT6358 PMIC"
 773         depends on MFD_MT6397
 774         help
 775           Say y here to select this option to enable the power regulator of
 776           MediaTek MT6358 PMIC.
 777           This driver supports the control of different power rails of device
 778           through regulator interface.
 779
 780 config REGULATOR_MT6359
 781         tristate "MediaTek MT6359 PMIC"
 782         depends on MFD_MT6397
 783         help
 784           Say y here to select this option to enable the power regulator of
 785           MediaTek MT6359 PMIC.
 786           This driver supports the control of different power rails of device
 787           through regulator interface.
 788
 789 config REGULATOR_MT6360
 790         tristate "MT6360 SubPMIC Regulator"
 791         depends on MFD_MT6360
 792         help
 793           Say Y here to enable MT6360 regulator support.
 794           This is support MT6360 PMIC/LDO part include
 795           2-channel buck with Thermal Shutdown and Overload Protection
 796           6-channel High PSRR and Low Dropout LDO.
 797
 798 config REGULATOR_MT6380
 799         tristate "MediaTek MT6380 PMIC"
 800         depends on MTK_PMIC_WRAP
 801         help
 802           Say y here to select this option to enable the power regulator of
 803           MediaTek MT6380 PMIC.
 804           This driver supports the control of different power rails of device
 805           through regulator interface.
 806
 807 config REGULATOR_MT6397
 808         tristate "MediaTek MT6397 PMIC"
 809         depends on MFD_MT6397
 810         help
 811           Say y here to select this option to enable the power regulator of
 812           MediaTek MT6397 PMIC.
 813           This driver supports the control of different power rails of device
 814           through regulator interface.
 815
 816 config REGULATOR_MTK_DVFSRC
 817         tristate "MediaTek DVFSRC regulator driver"
 818         depends on MTK_DVFSRC
 819         help
 820           Say y here to control regulator by DVFSRC (dynamic voltage
 821           and frequency scaling resource collector).
 822           This driver supports to control regulators via the DVFSRC
 823           of Mediatek. It allows for voting on regulator state
 824           between multiple users.
 825
 826 config REGULATOR_PALMAS
 827         tristate "TI Palmas PMIC Regulators"
 828         depends on MFD_PALMAS
 829         help
 830           If you wish to control the regulators on the Palmas series of
 831           chips say Y here. This will enable support for all the software
 832           controllable SMPS/LDO regulators.
 833
 834           The regulators available on Palmas series chips vary depending
 835           on the muxing. This is handled automatically in the driver by
 836           reading the mux info from OTP.
 837
 838 config REGULATOR_PBIAS
 839         tristate "PBIAS OMAP regulator driver"
 840         depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
 841         help
 842          Say y here to support pbias regulator for mmc1:SD card i/o
 843          on OMAP SoCs.
 844          This driver provides support for OMAP pbias modelled
 845          regulators.
 846
 847 config REGULATOR_PCA9450
 848         tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
 849         depends on I2C
 850         select REGMAP_I2C
 851         help
 852           Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
 853           regulator driver.
 854
 855 config REGULATOR_PCAP
 856         tristate "Motorola PCAP2 regulator driver"
 857         depends on EZX_PCAP
 858         help
 859          This driver provides support for the voltage regulators of the
 860          PCAP2 PMIC.
 861
 862 config REGULATOR_PCF50633
 863         tristate "NXP PCF50633 regulator driver"
 864         depends on MFD_PCF50633
 865         help
 866          Say Y here to support the voltage regulators and converters
 867          on PCF50633
 868
 869 config REGULATOR_PF8X00
 870         tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
 871         depends on I2C && OF
 872         select REGMAP_I2C
 873         help
 874           Say y here to support the regulators found on the NXP
 875           PF8100/PF8121A/PF8200 PMIC.
 876
 877           Say M here if you want to support for the regulators found
 878           on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
 879           "pf8x00-regulator".
 880
 881 config REGULATOR_PFUZE100
 882         tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
 883         depends on I2C && OF
 884         select REGMAP_I2C
 885         help
 886           Say y here to support the regulators found on the Freescale
 887           PFUZE100/200/3000/3001 PMIC.
 888
 889 config REGULATOR_PV88060
 890         tristate "Powerventure Semiconductor PV88060 regulator"
 891         depends on I2C
 892         select REGMAP_I2C
 893         help
 894           Say y here to support the voltage regulators and convertors
 895           PV88060
 896
 897 config REGULATOR_PV88080
 898         tristate "Powerventure Semiconductor PV88080 regulator"
 899         depends on I2C
 900         select REGMAP_I2C
 901         help
 902           Say y here to support the buck convertors on PV88080
 903
 904 config REGULATOR_PV88090
 905         tristate "Powerventure Semiconductor PV88090 regulator"
 906         depends on I2C
 907         select REGMAP_I2C
 908         help
 909           Say y here to support the voltage regulators and convertors
 910           on PV88090
 911
 912 config REGULATOR_PWM
 913         tristate "PWM voltage regulator"
 914         depends on PWM
 915         help
 916           This driver supports PWM controlled voltage regulators. PWM
 917           duty cycle can increase or decrease the voltage.
 918
 919 config REGULATOR_QCOM_RPM
 920         tristate "Qualcomm RPM regulator driver"
 921         depends on MFD_QCOM_RPM
 922         help
 923           If you say yes to this option, support will be included for the
 924           regulators exposed by the Resource Power Manager found in Qualcomm
 925           8660, 8960 and 8064 based devices.
 926
 927           Say M here if you want to include support for the regulators on the
 928           Qualcomm RPM as a module. The module will be named
 929           "qcom_rpm-regulator".
 930
 931 config REGULATOR_QCOM_RPMH
 932         tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
 933         depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST)
 934         depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST)
 935         help
 936           This driver supports control of PMIC regulators via the RPMh hardware
 937           block found on Qualcomm Technologies Inc. SoCs.  RPMh regulator
 938           control allows for voting on regulator state between multiple
 939           processors within the SoC.
 940
 941 config REGULATOR_QCOM_SMD_RPM
 942         tristate "Qualcomm SMD based RPM regulator driver"
 943         depends on QCOM_SMD_RPM
 944         help
 945           If you say yes to this option, support will be included for the
 946           regulators exposed by the Resource Power Manager found in Qualcomm
 947           8974 based devices.
 948
 949           Say M here if you want to include support for the regulators on the
 950           Qualcomm RPM as a module. The module will be named
 951           "qcom_smd-regulator".
 952
 953 config REGULATOR_QCOM_SPMI
 954         tristate "Qualcomm SPMI regulator driver"
 955         depends on SPMI || COMPILE_TEST
 956         help
 957           If you say yes to this option, support will be included for the
 958           regulators found in Qualcomm SPMI PMICs.
 959
 960           Say M here if you want to include support for the regulators on the
 961           Qualcomm SPMI PMICs as a module. The module will be named
 962           "qcom_spmi-regulator".
 963
 964 config REGULATOR_QCOM_USB_VBUS
 965         tristate "Qualcomm USB Vbus regulator driver"
 966         depends on SPMI || COMPILE_TEST
 967         help
 968           If you say yes to this option, support will be included for the
 969           regulator used to enable the VBUS output.
 970
 971           Say M here if you want to include support for enabling the VBUS output
 972           as a module. The module will be named "qcom_usb_vbus_regulator".
 973
 974 config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
 975         tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
 976         depends on BACKLIGHT_CLASS_DEVICE
 977         depends on I2C
 978         select REGMAP_I2C
 979         help
 980           This driver supports ATTINY regulator on the Raspberry Pi 7-inch
 981           touchscreen unit. The regulator is used to enable power to the
 982           TC358762, display and to control backlight.
 983
 984 config REGULATOR_RC5T583
 985         tristate "RICOH RC5T583 Power regulators"
 986         depends on MFD_RC5T583
 987         help
 988           Select this option to enable the power regulator of RICOH
 989           PMIC RC5T583.
 990           This driver supports the control of different power rails of device
 991           through regulator interface. The device supports multiple DCDC/LDO
 992           outputs which can be controlled by i2c communication.
 993
 994 config REGULATOR_RK808
 995         tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
 996         depends on MFD_RK808
 997         help
 998           Select this option to enable the power regulator of ROCKCHIP
 999           PMIC RK805,RK809&RK817,RK808 and RK818.
1000           This driver supports the control of different power rails of device
1001           through regulator interface. The device supports multiple DCDC/LDO
1002           outputs which can be controlled by i2c communication.
1003
1004 config REGULATOR_RN5T618
1005         tristate "Ricoh RN5T567/618 voltage regulators"
1006         depends on MFD_RN5T618
1007         help
1008           Say y here to support the regulators found on Ricoh RN5T567,
1009           RN5T618 or RC5T619 PMIC.
1010
1011 config REGULATOR_ROHM
1012         tristate
1013
1014 config REGULATOR_RT4801
1015         tristate "Richtek RT4801 Regulators"
1016         depends on I2C
1017         select REGMAP_I2C
1018         help
1019           This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
1020           The device supports two regulators (DSVP/DSVN).
1021
1022 config REGULATOR_RT4831
1023         tristate "Richtek RT4831 DSV Regulators"
1024         depends on MFD_RT4831
1025         help
1026           This adds support for voltage regulators in Richtek RT4831.
1027           There are three regulators (VLCM/DSVP/DSVN).
1028           VLCM is a virtual voltage input for DSVP/DSVN inside IC.
1029           And DSVP/DSVN is the real Vout range from 4V to 6.5V.
1030           It's common used to provide the power for the display panel.
1031
1032 config REGULATOR_RT5033
1033         tristate "Richtek RT5033 Regulators"
1034         depends on MFD_RT5033
1035         help
1036           This adds support for voltage and current regulators in Richtek
1037           RT5033 PMIC. The device supports multiple regulators like
1038           current source, LDO and Buck.
1039
1040 config REGULATOR_RT6160
1041         tristate "Richtek RT6160 BuckBoost voltage regulator"
1042         depends on I2C
1043         select REGMAP_I2C
1044         help
1045           This adds support for voltage regulator in Richtek RT6160.
1046           This device automatically change voltage output mode from
1047           Buck or Boost. The mode transistion depend on the input source voltage.
1048           The wide output range is from 2025mV to 5200mV and can be used on most
1049           common application scenario.
1050
1051 config REGULATOR_RT6245
1052         tristate "Richtek RT6245 voltage regulator"
1053         depends on I2C
1054         select REGMAP_I2C
1055         help
1056           This adds supprot for Richtek RT6245 voltage regulator.
1057           It can support up to 14A output current and adjustable output voltage
1058           from 0.4375V to 1.3875V, per step 12.5mV.
1059
1060 config REGULATOR_RTMV20
1061         tristate "Richtek RTMV20 Laser Diode Regulator"
1062         depends on I2C
1063         select REGMAP_I2C
1064         help
1065           This driver adds support for the load switch current regulator on
1066           the Richtek RTMV20. It can support the load current up to 6A and
1067           integrate strobe/vsync/fsin signal to synchronize the IR camera.
1068
1069 config REGULATOR_S2MPA01
1070         tristate "Samsung S2MPA01 voltage regulator"
1071         depends on MFD_SEC_CORE || COMPILE_TEST
1072         help
1073          This driver controls Samsung S2MPA01 voltage output regulator
1074          via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
1075
1076 config REGULATOR_S2MPS11
1077         tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
1078         depends on MFD_SEC_CORE || COMPILE_TEST
1079         help
1080          This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
1081          output regulator via I2C bus. The chip is comprised of high efficient
1082          Buck converters including Dual-Phase Buck converter, Buck-Boost
1083          converter, various LDOs.
1084
1085 config REGULATOR_S5M8767
1086         tristate "Samsung S5M8767A voltage regulator"
1087         depends on MFD_SEC_CORE || COMPILE_TEST
1088         help
1089          This driver supports a Samsung S5M8767A voltage output regulator
1090          via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
1091          supports DVS mode with 8bits of output voltage control.
1092
1093 config REGULATOR_SC2731
1094         tristate "Spreadtrum SC2731 power regulator driver"
1095         depends on MFD_SC27XX_PMIC || COMPILE_TEST
1096         help
1097           This driver provides support for the voltage regulators on the
1098           SC2731 PMIC.
1099
1100 config REGULATOR_SKY81452
1101         tristate "Skyworks Solutions SKY81452 voltage regulator"
1102         depends on MFD_SKY81452
1103         help
1104           This driver supports Skyworks SKY81452 voltage output regulator
1105           via I2C bus. SKY81452 has one voltage linear regulator can be
1106           programmed from 4.5V to 20V.
1107
1108           This driver can also be built as a module. If so, the module
1109           will be called sky81452-regulator.
1110
1111 config REGULATOR_SLG51000
1112         tristate "Dialog Semiconductor SLG51000 regulators"
1113         depends on I2C
1114         select REGMAP_I2C
1115         help
1116           Say y here to support for the Dialog Semiconductor SLG51000.
1117           The SLG51000 is seven compact and customizable low dropout
1118           regulators.
1119
1120 config REGULATOR_STM32_BOOSTER
1121         tristate "STMicroelectronics STM32 BOOSTER"
1122         depends on ARCH_STM32 || COMPILE_TEST
1123         help
1124           This driver supports internal booster (3V3) embedded in some
1125           STMicroelectronics STM32 chips. It can be used to supply ADC analog
1126           input switches when vdda supply is below 2.7V.
1127
1128           This driver can also be built as a module. If so, the module
1129           will be called stm32-booster.
1130
1131 config REGULATOR_STM32_VREFBUF
1132         tristate "STMicroelectronics STM32 VREFBUF"
1133         depends on ARCH_STM32 || COMPILE_TEST
1134         help
1135           This driver supports STMicroelectronics STM32 VREFBUF (voltage
1136           reference buffer) which can be used as voltage reference for
1137           internal ADCs, DACs and also for external components through
1138           dedicated Vref+ pin.
1139
1140           This driver can also be built as a module. If so, the module
1141           will be called stm32-vrefbuf.
1142
1143 config REGULATOR_STM32_PWR
1144         bool "STMicroelectronics STM32 PWR"
1145         depends on ARCH_STM32 || COMPILE_TEST
1146         help
1147           This driver supports internal regulators (1V1, 1V8, 3V3) in the
1148           STMicroelectronics STM32 chips.
1149
1150 config REGULATOR_STPMIC1
1151         tristate "STMicroelectronics STPMIC1 PMIC Regulators"
1152         depends on MFD_STPMIC1
1153         help
1154           This driver supports STMicroelectronics STPMIC1 PMIC voltage
1155           regulators and switches. The STPMIC1 regulators supply power to
1156           an application processor as well as to external system
1157           peripherals such as DDR, Flash memories and system devices.
1158
1159           To compile this driver as a module, choose M here: the
1160           module will be called stpmic1_regulator.
1161
1162 config REGULATOR_TI_ABB
1163         tristate "TI Adaptive Body Bias on-chip LDO"
1164         depends on ARCH_OMAP
1165         help
1166           Select this option to support Texas Instruments' on-chip Adaptive Body
1167           Bias (ABB) LDO regulators. It is recommended that this option be
1168           enabled on required TI SoC. Certain Operating Performance Points
1169           on TI SoCs may be unstable without enabling this as it provides
1170           device specific optimized bias to allow/optimize functionality.
1171
1172 config REGULATOR_STW481X_VMMC
1173         bool "ST Microelectronics STW481X VMMC regulator"
1174         depends on MFD_STW481X || COMPILE_TEST
1175         default y if MFD_STW481X
1176         help
1177           This driver supports the internal VMMC regulator in the STw481x
1178           PMIC chips.
1179
1180 config REGULATOR_SY7636A
1181         tristate "Silergy SY7636A voltage regulator"
1182         depends on MFD_SY7636A
1183         help
1184           This driver supports Silergy SY3686A voltage regulator.
1185
1186 config REGULATOR_SY8106A
1187         tristate "Silergy SY8106A regulator"
1188         depends on I2C && (OF || COMPILE_TEST)
1189         select REGMAP_I2C
1190         help
1191           This driver supports SY8106A single output regulator.
1192
1193 config REGULATOR_SY8824X
1194         tristate "Silergy SY8824C/SY8824E regulator"
1195         depends on I2C && (OF || COMPILE_TEST)
1196         select REGMAP_I2C
1197         help
1198           This driver supports SY8824C single output regulator.
1199
1200 config REGULATOR_SY8827N
1201         tristate "Silergy SY8827N regulator"
1202         depends on I2C && (OF || COMPILE_TEST)
1203         select REGMAP_I2C
1204         help
1205           This driver supports SY8827N single output regulator.
1206
1207 config REGULATOR_TPS51632
1208         tristate "TI TPS51632 Power Regulator"
1209         depends on I2C
1210         select REGMAP_I2C
1211         help
1212           This driver supports TPS51632 voltage regulator chip.
1213           The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
1214           with Serial VID control and DVFS.
1215           The voltage output can be configure through I2C interface or PWM
1216           interface.
1217
1218 config REGULATOR_TPS6105X
1219         tristate "TI TPS6105X Power regulators"
1220         depends on TPS6105X
1221         default y if TPS6105X
1222         help
1223           This driver supports TPS61050/TPS61052 voltage regulator chips.
1224           It is a single boost converter primarily for white LEDs and
1225           audio amplifiers.
1226
1227 config REGULATOR_TPS62360
1228         tristate "TI TPS6236x Power Regulator"
1229         depends on I2C
1230         select REGMAP_I2C
1231         help
1232           This driver supports TPS6236x voltage regulator chip. This
1233           regulator is meant for processor core supply. This chip is
1234           high-frequency synchronous step down dc-dc converter optimized
1235           for battery-powered portable applications.
1236
1237 config REGULATOR_TPS65023
1238         tristate "TI TPS65023 Power regulators"
1239         depends on I2C
1240         select REGMAP_I2C
1241         help
1242           This driver supports TPS65023 voltage regulator chips. TPS65023 provides
1243           three step-down converters and two general-purpose LDO voltage regulators.
1244           It supports TI's software based Class-2 SmartReflex implementation.
1245
1246 config REGULATOR_TPS6507X
1247         tristate "TI TPS6507X Power regulators"
1248         depends on I2C
1249         help
1250           This driver supports TPS6507X voltage regulator chips. TPS6507X provides
1251           three step-down converters and two general-purpose LDO voltage regulators.
1252           It supports TI's software based Class-2 SmartReflex implementation.
1253
1254 config REGULATOR_TPS65086
1255         tristate "TI TPS65086 Power regulators"
1256         depends on MFD_TPS65086
1257         help
1258           This driver provides support for the voltage regulators on
1259           TI TPS65086 PMICs.
1260
1261 config REGULATOR_TPS65090
1262         tristate "TI TPS65090 Power regulator"
1263         depends on MFD_TPS65090
1264         help
1265           This driver provides support for the voltage regulators on the
1266           TI TPS65090 PMIC.
1267
1268 config REGULATOR_TPS65132
1269         tristate "TI TPS65132 Dual Output Power regulators"
1270         depends on I2C && GPIOLIB
1271         select REGMAP_I2C
1272         help
1273           This driver supports TPS65132 single inductor - dual output
1274           power supply specifically designed for display panels.
1275
1276 config REGULATOR_TPS65217
1277         tristate "TI TPS65217 Power regulators"
1278         depends on MFD_TPS65217
1279         help
1280           This driver supports TPS65217 voltage regulator chips. TPS65217
1281           provides three step-down converters and four general-purpose LDO
1282           voltage regulators. It supports software based voltage control
1283           for different voltage domains
1284
1285 config REGULATOR_TPS65218
1286         tristate "TI TPS65218 Power regulators"
1287         depends on MFD_TPS65218 && OF
1288         help
1289           This driver supports TPS65218 voltage regulator chips. TPS65218
1290           provides six step-down converters and one general-purpose LDO
1291           voltage regulators. It supports software based voltage control
1292           for different voltage domains
1293
1294 config REGULATOR_TPS6524X
1295         tristate "TI TPS6524X Power regulators"
1296         depends on SPI
1297         help
1298           This driver supports TPS6524X voltage regulator chips. TPS6524X
1299           provides three step-down converters and two general-purpose LDO
1300           voltage regulators.  This device is interfaced using a customized
1301           serial interface currently supported on the sequencer serial
1302           port controller.
1303
1304 config REGULATOR_TPS6586X
1305         tristate "TI TPS6586X Power regulators"
1306         depends on MFD_TPS6586X
1307         help
1308           This driver supports TPS6586X voltage regulator chips.
1309
1310 config REGULATOR_TPS65910
1311         tristate "TI TPS65910/TPS65911 Power Regulators"
1312         depends on MFD_TPS65910
1313         help
1314           This driver supports TPS65910/TPS65911 voltage regulator chips.
1315
1316 config REGULATOR_TPS65912
1317         tristate "TI TPS65912 Power regulator"
1318         depends on MFD_TPS65912
1319         help
1320             This driver supports TPS65912 voltage regulator chip.
1321
1322 config REGULATOR_TPS80031
1323         tristate "TI TPS80031/TPS80032 power regulator driver"
1324         depends on MFD_TPS80031
1325         help
1326           TPS80031/ TPS80032 Fully Integrated Power Management with Power
1327           Path and Battery Charger. It has 5 configurable step-down
1328           converters, 11 general purpose LDOs, VBUS generator and digital
1329           output to control regulators.
1330
1331 config REGULATOR_TWL4030
1332         tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
1333         depends on TWL4030_CORE
1334         help
1335           This driver supports the voltage regulators provided by
1336           this family of companion chips.
1337
1338 config REGULATOR_UNIPHIER
1339         tristate "UniPhier regulator driver"
1340         depends on ARCH_UNIPHIER || COMPILE_TEST
1341         depends on OF
1342         select REGMAP_MMIO
1343         default ARCH_UNIPHIER
1344         help
1345           Support for regulators implemented on Socionext UniPhier SoCs.
1346
1347 config REGULATOR_VCTRL
1348         tristate "Voltage controlled regulators"
1349         depends on OF
1350         help
1351           This driver provides support for voltage regulators whose output
1352           voltage is controlled by the voltage of another regulator.
1353
1354 config REGULATOR_VEXPRESS
1355         tristate "Versatile Express regulators"
1356         depends on VEXPRESS_CONFIG
1357         help
1358           This driver provides support for voltage regulators available
1359           on the ARM Ltd's Versatile Express platform.
1360
1361 config REGULATOR_VQMMC_IPQ4019
1362         tristate "IPQ4019 VQMMC SD LDO regulator support"
1363         depends on ARCH_QCOM
1364         help
1365           This driver provides support for the VQMMC LDO I/0
1366           voltage regulator of the IPQ4019 SD/EMMC controller.
1367
1368 config REGULATOR_WM831X
1369         tristate "Wolfson Microelectronics WM831x PMIC regulators"
1370         depends on MFD_WM831X
1371         help
1372           Support the voltage and current regulators of the WM831x series
1373           of PMIC devices.
1374
1375 config REGULATOR_WM8350
1376         tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
1377         depends on MFD_WM8350
1378         help
1379           This driver provides support for the voltage and current regulators
1380           of the WM8350 AudioPlus PMIC.
1381
1382 config REGULATOR_WM8400
1383         tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
1384         depends on MFD_WM8400
1385         help
1386           This driver provides support for the voltage regulators of the
1387           WM8400 AudioPlus PMIC.
1388
1389 config REGULATOR_WM8994
1390         tristate "Wolfson Microelectronics WM8994 CODEC"
1391         depends on MFD_WM8994
1392         help
1393           This driver provides support for the voltage regulators on the
1394           WM8994 CODEC.
1395
1396 config REGULATOR_QCOM_LABIBB
1397         tristate "QCOM LAB/IBB regulator support"
1398         depends on SPMI || COMPILE_TEST
1399         help
1400           This driver supports Qualcomm's LAB/IBB regulators present on the
1401           Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
1402           based PMIC implementations. LAB can be used as positive
1403           boost regulator and IBB can be used as a negative boost regulator
1404           for LCD display panel.
1405
1406 endif
1407