]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/blob - drivers/regulator/qcom_spmi-regulator.c
projects / mirror_ubuntu-jammy-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregk...
[mirror_ubuntu-jammy-kernel.git] / drivers / regulator / qcom_spmi-regulator.c
1 /*
2 * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 */
13
14 #include <linux/module.h>
15 #include <linux/delay.h>
16 #include <linux/err.h>
17 #include <linux/kernel.h>
18 #include <linux/interrupt.h>
19 #include <linux/bitops.h>
20 #include <linux/slab.h>
21 #include <linux/of.h>
22 #include <linux/of_device.h>
23 #include <linux/platform_device.h>
24 #include <linux/ktime.h>
25 #include <linux/regulator/driver.h>
26 #include <linux/regmap.h>
27 #include <linux/list.h>
28
29 /* Pin control enable input pins. */
30 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_NONE 0x00
31 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN0 0x01
32 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN1 0x02
33 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN2 0x04
34 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_EN3 0x08
35 #define SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT 0x10
36
37 /* Pin control high power mode input pins. */
38 #define SPMI_REGULATOR_PIN_CTRL_HPM_NONE 0x00
39 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN0 0x01
40 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN1 0x02
41 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN2 0x04
42 #define SPMI_REGULATOR_PIN_CTRL_HPM_EN3 0x08
43 #define SPMI_REGULATOR_PIN_CTRL_HPM_SLEEP_B 0x10
44 #define SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT 0x20
45
46 /*
47 * Used with enable parameters to specify that hardware default register values
48 * should be left unaltered.
49 */
50 #define SPMI_REGULATOR_USE_HW_DEFAULT 2
51
52 /* Soft start strength of a voltage switch type regulator */
53 enum spmi_vs_soft_start_str {
54 SPMI_VS_SOFT_START_STR_0P05_UA = 0,
55 SPMI_VS_SOFT_START_STR_0P25_UA,
56 SPMI_VS_SOFT_START_STR_0P55_UA,
57 SPMI_VS_SOFT_START_STR_0P75_UA,
58 SPMI_VS_SOFT_START_STR_HW_DEFAULT,
59 };
60
61 /**
62 * struct spmi_regulator_init_data - spmi-regulator initialization data
63 * @pin_ctrl_enable: Bit mask specifying which hardware pins should be
64 * used to enable the regulator, if any
65 * Value should be an ORing of
66 * SPMI_REGULATOR_PIN_CTRL_ENABLE_* constants. If
67 * the bit specified by
68 * SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT is
69 * set, then pin control enable hardware registers
70 * will not be modified.
71 * @pin_ctrl_hpm: Bit mask specifying which hardware pins should be
72 * used to force the regulator into high power
73 * mode, if any
74 * Value should be an ORing of
75 * SPMI_REGULATOR_PIN_CTRL_HPM_* constants. If
76 * the bit specified by
77 * SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT is
78 * set, then pin control mode hardware registers
79 * will not be modified.
80 * @vs_soft_start_strength: This parameter sets the soft start strength for
81 * voltage switch type regulators. Its value
82 * should be one of SPMI_VS_SOFT_START_STR_*. If
83 * its value is SPMI_VS_SOFT_START_STR_HW_DEFAULT,
84 * then the soft start strength will be left at its
85 * default hardware value.
86 */
87 struct spmi_regulator_init_data {
88 unsigned pin_ctrl_enable;
89 unsigned pin_ctrl_hpm;
90 enum spmi_vs_soft_start_str vs_soft_start_strength;
91 };
92
93 /* These types correspond to unique register layouts. */
94 enum spmi_regulator_logical_type {
95 SPMI_REGULATOR_LOGICAL_TYPE_SMPS,
96 SPMI_REGULATOR_LOGICAL_TYPE_LDO,
97 SPMI_REGULATOR_LOGICAL_TYPE_VS,
98 SPMI_REGULATOR_LOGICAL_TYPE_BOOST,
99 SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS,
100 SPMI_REGULATOR_LOGICAL_TYPE_BOOST_BYP,
101 SPMI_REGULATOR_LOGICAL_TYPE_LN_LDO,
102 SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS,
103 SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS,
104 SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
105 };
106
107 enum spmi_regulator_type {
108 SPMI_REGULATOR_TYPE_BUCK = 0x03,
109 SPMI_REGULATOR_TYPE_LDO = 0x04,
110 SPMI_REGULATOR_TYPE_VS = 0x05,
111 SPMI_REGULATOR_TYPE_BOOST = 0x1b,
112 SPMI_REGULATOR_TYPE_FTS = 0x1c,
113 SPMI_REGULATOR_TYPE_BOOST_BYP = 0x1f,
114 SPMI_REGULATOR_TYPE_ULT_LDO = 0x21,
115 SPMI_REGULATOR_TYPE_ULT_BUCK = 0x22,
116 };
117
118 enum spmi_regulator_subtype {
119 SPMI_REGULATOR_SUBTYPE_GP_CTL = 0x08,
120 SPMI_REGULATOR_SUBTYPE_RF_CTL = 0x09,
121 SPMI_REGULATOR_SUBTYPE_N50 = 0x01,
122 SPMI_REGULATOR_SUBTYPE_N150 = 0x02,
123 SPMI_REGULATOR_SUBTYPE_N300 = 0x03,
124 SPMI_REGULATOR_SUBTYPE_N600 = 0x04,
125 SPMI_REGULATOR_SUBTYPE_N1200 = 0x05,
126 SPMI_REGULATOR_SUBTYPE_N600_ST = 0x06,
127 SPMI_REGULATOR_SUBTYPE_N1200_ST = 0x07,
128 SPMI_REGULATOR_SUBTYPE_N900_ST = 0x14,
129 SPMI_REGULATOR_SUBTYPE_N300_ST = 0x15,
130 SPMI_REGULATOR_SUBTYPE_P50 = 0x08,
131 SPMI_REGULATOR_SUBTYPE_P150 = 0x09,
132 SPMI_REGULATOR_SUBTYPE_P300 = 0x0a,
133 SPMI_REGULATOR_SUBTYPE_P600 = 0x0b,
134 SPMI_REGULATOR_SUBTYPE_P1200 = 0x0c,
135 SPMI_REGULATOR_SUBTYPE_LN = 0x10,
136 SPMI_REGULATOR_SUBTYPE_LV_P50 = 0x28,
137 SPMI_REGULATOR_SUBTYPE_LV_P150 = 0x29,
138 SPMI_REGULATOR_SUBTYPE_LV_P300 = 0x2a,
139 SPMI_REGULATOR_SUBTYPE_LV_P600 = 0x2b,
140 SPMI_REGULATOR_SUBTYPE_LV_P1200 = 0x2c,
141 SPMI_REGULATOR_SUBTYPE_LV_P450 = 0x2d,
142 SPMI_REGULATOR_SUBTYPE_LV100 = 0x01,
143 SPMI_REGULATOR_SUBTYPE_LV300 = 0x02,
144 SPMI_REGULATOR_SUBTYPE_MV300 = 0x08,
145 SPMI_REGULATOR_SUBTYPE_MV500 = 0x09,
146 SPMI_REGULATOR_SUBTYPE_HDMI = 0x10,
147 SPMI_REGULATOR_SUBTYPE_OTG = 0x11,
148 SPMI_REGULATOR_SUBTYPE_5V_BOOST = 0x01,
149 SPMI_REGULATOR_SUBTYPE_FTS_CTL = 0x08,
150 SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL = 0x09,
151 SPMI_REGULATOR_SUBTYPE_BB_2A = 0x01,
152 SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1 = 0x0d,
153 SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2 = 0x0e,
154 SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f,
155 SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10,
156 };
157
158 enum spmi_common_regulator_registers {
159 SPMI_COMMON_REG_DIG_MAJOR_REV = 0x01,
160 SPMI_COMMON_REG_TYPE = 0x04,
161 SPMI_COMMON_REG_SUBTYPE = 0x05,
162 SPMI_COMMON_REG_VOLTAGE_RANGE = 0x40,
163 SPMI_COMMON_REG_VOLTAGE_SET = 0x41,
164 SPMI_COMMON_REG_MODE = 0x45,
165 SPMI_COMMON_REG_ENABLE = 0x46,
166 SPMI_COMMON_REG_PULL_DOWN = 0x48,
167 SPMI_COMMON_REG_SOFT_START = 0x4c,
168 SPMI_COMMON_REG_STEP_CTRL = 0x61,
169 };
170
171 enum spmi_vs_registers {
172 SPMI_VS_REG_OCP = 0x4a,
173 SPMI_VS_REG_SOFT_START = 0x4c,
174 };
175
176 enum spmi_boost_registers {
177 SPMI_BOOST_REG_CURRENT_LIMIT = 0x4a,
178 };
179
180 enum spmi_boost_byp_registers {
181 SPMI_BOOST_BYP_REG_CURRENT_LIMIT = 0x4b,
182 };
183
184 /* Used for indexing into ctrl_reg. These are offets from 0x40 */
185 enum spmi_common_control_register_index {
186 SPMI_COMMON_IDX_VOLTAGE_RANGE = 0,
187 SPMI_COMMON_IDX_VOLTAGE_SET = 1,
188 SPMI_COMMON_IDX_MODE = 5,
189 SPMI_COMMON_IDX_ENABLE = 6,
190 };
191
192 /* Common regulator control register layout */
193 #define SPMI_COMMON_ENABLE_MASK 0x80
194 #define SPMI_COMMON_ENABLE 0x80
195 #define SPMI_COMMON_DISABLE 0x00
196 #define SPMI_COMMON_ENABLE_FOLLOW_HW_EN3_MASK 0x08
197 #define SPMI_COMMON_ENABLE_FOLLOW_HW_EN2_MASK 0x04
198 #define SPMI_COMMON_ENABLE_FOLLOW_HW_EN1_MASK 0x02
199 #define SPMI_COMMON_ENABLE_FOLLOW_HW_EN0_MASK 0x01
200 #define SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK 0x0f
201
202 /* Common regulator mode register layout */
203 #define SPMI_COMMON_MODE_HPM_MASK 0x80
204 #define SPMI_COMMON_MODE_AUTO_MASK 0x40
205 #define SPMI_COMMON_MODE_BYPASS_MASK 0x20
206 #define SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK 0x10
207 #define SPMI_COMMON_MODE_FOLLOW_HW_EN3_MASK 0x08
208 #define SPMI_COMMON_MODE_FOLLOW_HW_EN2_MASK 0x04
209 #define SPMI_COMMON_MODE_FOLLOW_HW_EN1_MASK 0x02
210 #define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK 0x01
211 #define SPMI_COMMON_MODE_FOLLOW_ALL_MASK 0x1f
212
213 /* Common regulator pull down control register layout */
214 #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK 0x80
215
216 /* LDO regulator current limit control register layout */
217 #define SPMI_LDO_CURRENT_LIMIT_ENABLE_MASK 0x80
218
219 /* LDO regulator soft start control register layout */
220 #define SPMI_LDO_SOFT_START_ENABLE_MASK 0x80
221
222 /* VS regulator over current protection control register layout */
223 #define SPMI_VS_OCP_OVERRIDE 0x01
224 #define SPMI_VS_OCP_NO_OVERRIDE 0x00
225
226 /* VS regulator soft start control register layout */
227 #define SPMI_VS_SOFT_START_ENABLE_MASK 0x80
228 #define SPMI_VS_SOFT_START_SEL_MASK 0x03
229
230 /* Boost regulator current limit control register layout */
231 #define SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK 0x80
232 #define SPMI_BOOST_CURRENT_LIMIT_MASK 0x07
233
234 #define SPMI_VS_OCP_DEFAULT_MAX_RETRIES 10
235 #define SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS 30
236 #define SPMI_VS_OCP_FALL_DELAY_US 90
237 #define SPMI_VS_OCP_FAULT_DELAY_US 20000
238
239 #define SPMI_FTSMPS_STEP_CTRL_STEP_MASK 0x18
240 #define SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT 3
241 #define SPMI_FTSMPS_STEP_CTRL_DELAY_MASK 0x07
242 #define SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT 0
243
244 /* Clock rate in kHz of the FTSMPS regulator reference clock. */
245 #define SPMI_FTSMPS_CLOCK_RATE 19200
246
247 /* Minimum voltage stepper delay for each step. */
248 #define SPMI_FTSMPS_STEP_DELAY 8
249 #define SPMI_DEFAULT_STEP_DELAY 20
250
251 /*
252 * The ratio SPMI_FTSMPS_STEP_MARGIN_NUM/SPMI_FTSMPS_STEP_MARGIN_DEN is used to
253 * adjust the step rate in order to account for oscillator variance.
254 */
255 #define SPMI_FTSMPS_STEP_MARGIN_NUM 4
256 #define SPMI_FTSMPS_STEP_MARGIN_DEN 5
257
258 /* VSET value to decide the range of ULT SMPS */
259 #define ULT_SMPS_RANGE_SPLIT 0x60
260
261 /**
262 * struct spmi_voltage_range - regulator set point voltage mapping description
263 * @min_uV: Minimum programmable output voltage resulting from
264 * set point register value 0x00
265 * @max_uV: Maximum programmable output voltage
266 * @step_uV: Output voltage increase resulting from the set point
267 * register value increasing by 1
268 * @set_point_min_uV: Minimum allowed voltage
269 * @set_point_max_uV: Maximum allowed voltage. This may be tweaked in order
270 * to pick which range should be used in the case of
271 * overlapping set points.
272 * @n_voltages: Number of preferred voltage set points present in this
273 * range
274 * @range_sel: Voltage range register value corresponding to this range
275 *
276 * The following relationships must be true for the values used in this struct:
277 * (max_uV - min_uV) % step_uV == 0
278 * (set_point_min_uV - min_uV) % step_uV == 0*
279 * (set_point_max_uV - min_uV) % step_uV == 0*
280 * n_voltages = (set_point_max_uV - set_point_min_uV) / step_uV + 1
281 *
282 * *Note, set_point_min_uV == set_point_max_uV == 0 is allowed in order to
283 * specify that the voltage range has meaning, but is not preferred.
284 */
285 struct spmi_voltage_range {
286 int min_uV;
287 int max_uV;
288 int step_uV;
289 int set_point_min_uV;
290 int set_point_max_uV;
291 unsigned n_voltages;
292 u8 range_sel;
293 };
294
295 /*
296 * The ranges specified in the spmi_voltage_set_points struct must be listed
297 * so that range[i].set_point_max_uV < range[i+1].set_point_min_uV.
298 */
299 struct spmi_voltage_set_points {
300 struct spmi_voltage_range *range;
301 int count;
302 unsigned n_voltages;
303 };
304
305 struct spmi_regulator {
306 struct regulator_desc desc;
307 struct device *dev;
308 struct delayed_work ocp_work;
309 struct regmap *regmap;
310 struct spmi_voltage_set_points *set_points;
311 enum spmi_regulator_logical_type logical_type;
312 int ocp_irq;
313 int ocp_count;
314 int ocp_max_retries;
315 int ocp_retry_delay_ms;
316 int hpm_min_load;
317 int slew_rate;
318 ktime_t vs_enable_time;
319 u16 base;
320 struct list_head node;
321 };
322
323 struct spmi_regulator_mapping {
324 enum spmi_regulator_type type;
325 enum spmi_regulator_subtype subtype;
326 enum spmi_regulator_logical_type logical_type;
327 u32 revision_min;
328 u32 revision_max;
329 struct regulator_ops *ops;
330 struct spmi_voltage_set_points *set_points;
331 int hpm_min_load;
332 };
333
334 struct spmi_regulator_data {
335 const char *name;
336 u16 base;
337 const char *supply;
338 const char *ocp;
339 u16 force_type;
340 };
341
342 #define SPMI_VREG(_type, _subtype, _dig_major_min, _dig_major_max, \
343 _logical_type, _ops_val, _set_points_val, _hpm_min_load) \
344 { \
345 .type = SPMI_REGULATOR_TYPE_##_type, \
346 .subtype = SPMI_REGULATOR_SUBTYPE_##_subtype, \
347 .revision_min = _dig_major_min, \
348 .revision_max = _dig_major_max, \
349 .logical_type = SPMI_REGULATOR_LOGICAL_TYPE_##_logical_type, \
350 .ops = &spmi_##_ops_val##_ops, \
351 .set_points = &_set_points_val##_set_points, \
352 .hpm_min_load = _hpm_min_load, \
353 }
354
355 #define SPMI_VREG_VS(_subtype, _dig_major_min, _dig_major_max) \
356 { \
357 .type = SPMI_REGULATOR_TYPE_VS, \
358 .subtype = SPMI_REGULATOR_SUBTYPE_##_subtype, \
359 .revision_min = _dig_major_min, \
360 .revision_max = _dig_major_max, \
361 .logical_type = SPMI_REGULATOR_LOGICAL_TYPE_VS, \
362 .ops = &spmi_vs_ops, \
363 }
364
365 #define SPMI_VOLTAGE_RANGE(_range_sel, _min_uV, _set_point_min_uV, \
366 _set_point_max_uV, _max_uV, _step_uV) \
367 { \
368 .min_uV = _min_uV, \
369 .max_uV = _max_uV, \
370 .set_point_min_uV = _set_point_min_uV, \
371 .set_point_max_uV = _set_point_max_uV, \
372 .step_uV = _step_uV, \
373 .range_sel = _range_sel, \
374 }
375
376 #define DEFINE_SPMI_SET_POINTS(name) \
377 struct spmi_voltage_set_points name##_set_points = { \
378 .range = name##_ranges, \
379 .count = ARRAY_SIZE(name##_ranges), \
380 }
381
382 /*
383 * These tables contain the physically available PMIC regulator voltage setpoint
384 * ranges. Where two ranges overlap in hardware, one of the ranges is trimmed
385 * to ensure that the setpoints available to software are monotonically
386 * increasing and unique. The set_voltage callback functions expect these
387 * properties to hold.
388 */
389 static struct spmi_voltage_range pldo_ranges[] = {
390 SPMI_VOLTAGE_RANGE(2, 750000, 750000, 1537500, 1537500, 12500),
391 SPMI_VOLTAGE_RANGE(3, 1500000, 1550000, 3075000, 3075000, 25000),
392 SPMI_VOLTAGE_RANGE(4, 1750000, 3100000, 4900000, 4900000, 50000),
393 };
394
395 static struct spmi_voltage_range nldo1_ranges[] = {
396 SPMI_VOLTAGE_RANGE(2, 750000, 750000, 1537500, 1537500, 12500),
397 };
398
399 static struct spmi_voltage_range nldo2_ranges[] = {
400 SPMI_VOLTAGE_RANGE(0, 375000, 0, 0, 1537500, 12500),
401 SPMI_VOLTAGE_RANGE(1, 375000, 375000, 768750, 768750, 6250),
402 SPMI_VOLTAGE_RANGE(2, 750000, 775000, 1537500, 1537500, 12500),
403 };
404
405 static struct spmi_voltage_range nldo3_ranges[] = {
406 SPMI_VOLTAGE_RANGE(0, 375000, 375000, 1537500, 1537500, 12500),
407 SPMI_VOLTAGE_RANGE(1, 375000, 0, 0, 1537500, 12500),
408 SPMI_VOLTAGE_RANGE(2, 750000, 0, 0, 1537500, 12500),
409 };
410
411 static struct spmi_voltage_range ln_ldo_ranges[] = {
412 SPMI_VOLTAGE_RANGE(1, 690000, 690000, 1110000, 1110000, 60000),
413 SPMI_VOLTAGE_RANGE(0, 1380000, 1380000, 2220000, 2220000, 120000),
414 };
415
416 static struct spmi_voltage_range smps_ranges[] = {
417 SPMI_VOLTAGE_RANGE(0, 375000, 375000, 1562500, 1562500, 12500),
418 SPMI_VOLTAGE_RANGE(1, 1550000, 1575000, 3125000, 3125000, 25000),
419 };
420
421 static struct spmi_voltage_range ftsmps_ranges[] = {
422 SPMI_VOLTAGE_RANGE(0, 0, 350000, 1275000, 1275000, 5000),
423 SPMI_VOLTAGE_RANGE(1, 0, 1280000, 2040000, 2040000, 10000),
424 };
425
426 static struct spmi_voltage_range ftsmps2p5_ranges[] = {
427 SPMI_VOLTAGE_RANGE(0, 80000, 350000, 1355000, 1355000, 5000),
428 SPMI_VOLTAGE_RANGE(1, 160000, 1360000, 2200000, 2200000, 10000),
429 };
430
431 static struct spmi_voltage_range boost_ranges[] = {
432 SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000),
433 };
434
435 static struct spmi_voltage_range boost_byp_ranges[] = {
436 SPMI_VOLTAGE_RANGE(0, 2500000, 2500000, 5200000, 5650000, 50000),
437 };
438
439 static struct spmi_voltage_range ult_lo_smps_ranges[] = {
440 SPMI_VOLTAGE_RANGE(0, 375000, 375000, 1562500, 1562500, 12500),
441 SPMI_VOLTAGE_RANGE(1, 750000, 0, 0, 1525000, 25000),
442 };
443
444 static struct spmi_voltage_range ult_ho_smps_ranges[] = {
445 SPMI_VOLTAGE_RANGE(0, 1550000, 1550000, 2325000, 2325000, 25000),
446 };
447
448 static struct spmi_voltage_range ult_nldo_ranges[] = {
449 SPMI_VOLTAGE_RANGE(0, 375000, 375000, 1537500, 1537500, 12500),
450 };
451
452 static struct spmi_voltage_range ult_pldo_ranges[] = {
453 SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500),
454 };
455
456 static DEFINE_SPMI_SET_POINTS(pldo);
457 static DEFINE_SPMI_SET_POINTS(nldo1);
458 static DEFINE_SPMI_SET_POINTS(nldo2);
459 static DEFINE_SPMI_SET_POINTS(nldo3);
460 static DEFINE_SPMI_SET_POINTS(ln_ldo);
461 static DEFINE_SPMI_SET_POINTS(smps);
462 static DEFINE_SPMI_SET_POINTS(ftsmps);
463 static DEFINE_SPMI_SET_POINTS(ftsmps2p5);
464 static DEFINE_SPMI_SET_POINTS(boost);
465 static DEFINE_SPMI_SET_POINTS(boost_byp);
466 static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
467 static DEFINE_SPMI_SET_POINTS(ult_ho_smps);
468 static DEFINE_SPMI_SET_POINTS(ult_nldo);
469 static DEFINE_SPMI_SET_POINTS(ult_pldo);
470
471 static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
472 int len)
473 {
474 return regmap_bulk_read(vreg->regmap, vreg->base + addr, buf, len);
475 }
476
477 static inline int spmi_vreg_write(struct spmi_regulator *vreg, u16 addr,
478 u8 *buf, int len)
479 {
480 return regmap_bulk_write(vreg->regmap, vreg->base + addr, buf, len);
481 }
482
483 static int spmi_vreg_update_bits(struct spmi_regulator *vreg, u16 addr, u8 val,
484 u8 mask)
485 {
486 return regmap_update_bits(vreg->regmap, vreg->base + addr, mask, val);
487 }
488
489 static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
490 {
491 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
492
493 if (vreg->ocp_irq) {
494 vreg->ocp_count = 0;
495 vreg->vs_enable_time = ktime_get();
496 }
497
498 return regulator_enable_regmap(rdev);
499 }
500
501 static int spmi_regulator_vs_ocp(struct regulator_dev *rdev)
502 {
503 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
504 u8 reg = SPMI_VS_OCP_OVERRIDE;
505
506 return spmi_vreg_write(vreg, SPMI_VS_REG_OCP, &reg, 1);
507 }
508
509 static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
510 int min_uV, int max_uV)
511 {
512 const struct spmi_voltage_range *range;
513 int uV = min_uV;
514 int lim_min_uV, lim_max_uV, i, range_id, range_max_uV;
515 int selector, voltage_sel;
516
517 /* Check if request voltage is outside of physically settable range. */
518 lim_min_uV = vreg->set_points->range[0].set_point_min_uV;
519 lim_max_uV =
520 vreg->set_points->range[vreg->set_points->count - 1].set_point_max_uV;
521
522 if (uV < lim_min_uV && max_uV >= lim_min_uV)
523 uV = lim_min_uV;
524
525 if (uV < lim_min_uV || uV > lim_max_uV) {
526 dev_err(vreg->dev,
527 "request v=[%d, %d] is outside possible v=[%d, %d]\n",
528 min_uV, max_uV, lim_min_uV, lim_max_uV);
529 return -EINVAL;
530 }
531
532 /* Find the range which uV is inside of. */
533 for (i = vreg->set_points->count - 1; i > 0; i--) {
534 range_max_uV = vreg->set_points->range[i - 1].set_point_max_uV;
535 if (uV > range_max_uV && range_max_uV > 0)
536 break;
537 }
538
539 range_id = i;
540 range = &vreg->set_points->range[range_id];
541
542 /*
543 * Force uV to be an allowed set point by applying a ceiling function to
544 * the uV value.
545 */
546 voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
547 uV = voltage_sel * range->step_uV + range->min_uV;
548
549 if (uV > max_uV) {
550 dev_err(vreg->dev,
551 "request v=[%d, %d] cannot be met by any set point; "
552 "next set point: %d\n",
553 min_uV, max_uV, uV);
554 return -EINVAL;
555 }
556
557 selector = 0;
558 for (i = 0; i < range_id; i++)
559 selector += vreg->set_points->range[i].n_voltages;
560 selector += (uV - range->set_point_min_uV) / range->step_uV;
561
562 return selector;
563 }
564
565 static int spmi_sw_selector_to_hw(struct spmi_regulator *vreg,
566 unsigned selector, u8 *range_sel,
567 u8 *voltage_sel)
568 {
569 const struct spmi_voltage_range *range, *end;
570 unsigned offset;
571
572 range = vreg->set_points->range;
573 end = range + vreg->set_points->count;
574
575 for (; range < end; range++) {
576 if (selector < range->n_voltages) {
577 /*
578 * hardware selectors between set point min and real
579 * min are invalid so we ignore them
580 */
581 offset = range->set_point_min_uV - range->min_uV;
582 offset /= range->step_uV;
583 *voltage_sel = selector + offset;
584 *range_sel = range->range_sel;
585 return 0;
586 }
587
588 selector -= range->n_voltages;
589 }
590
591 return -EINVAL;
592 }
593
594 static int spmi_hw_selector_to_sw(struct spmi_regulator *vreg, u8 hw_sel,
595 const struct spmi_voltage_range *range)
596 {
597 unsigned sw_sel = 0;
598 unsigned offset, max_hw_sel;
599 const struct spmi_voltage_range *r = vreg->set_points->range;
600 const struct spmi_voltage_range *end = r + vreg->set_points->count;
601
602 for (; r < end; r++) {
603 if (r == range && range->n_voltages) {
604 /*
605 * hardware selectors between set point min and real
606 * min and between set point max and real max are
607 * invalid so we return an error if they're
608 * programmed into the hardware
609 */
610 offset = range->set_point_min_uV - range->min_uV;
611 offset /= range->step_uV;
612 if (hw_sel < offset)
613 return -EINVAL;
614
615 max_hw_sel = range->set_point_max_uV - range->min_uV;
616 max_hw_sel /= range->step_uV;
617 if (hw_sel > max_hw_sel)
618 return -EINVAL;
619
620 return sw_sel + hw_sel - offset;
621 }
622 sw_sel += r->n_voltages;
623 }
624
625 return -EINVAL;
626 }
627
628 static const struct spmi_voltage_range *
629 spmi_regulator_find_range(struct spmi_regulator *vreg)
630 {
631 u8 range_sel;
632 const struct spmi_voltage_range *range, *end;
633
634 range = vreg->set_points->range;
635 end = range + vreg->set_points->count;
636
637 spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, &range_sel, 1);
638
639 for (; range < end; range++)
640 if (range->range_sel == range_sel)
641 return range;
642
643 return NULL;
644 }
645
646 static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
647 int min_uV, int max_uV)
648 {
649 const struct spmi_voltage_range *range;
650 int uV = min_uV;
651 int i, selector;
652
653 range = spmi_regulator_find_range(vreg);
654 if (!range)
655 goto different_range;
656
657 if (uV < range->min_uV && max_uV >= range->min_uV)
658 uV = range->min_uV;
659
660 if (uV < range->min_uV || uV > range->max_uV) {
661 /* Current range doesn't support the requested voltage. */
662 goto different_range;
663 }
664
665 /*
666 * Force uV to be an allowed set point by applying a ceiling function to
667 * the uV value.
668 */
669 uV = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
670 uV = uV * range->step_uV + range->min_uV;
671
672 if (uV > max_uV) {
673 /*
674 * No set point in the current voltage range is within the
675 * requested min_uV to max_uV range.
676 */
677 goto different_range;
678 }
679
680 selector = 0;
681 for (i = 0; i < vreg->set_points->count; i++) {
682 if (uV >= vreg->set_points->range[i].set_point_min_uV
683 && uV <= vreg->set_points->range[i].set_point_max_uV) {
684 selector +=
685 (uV - vreg->set_points->range[i].set_point_min_uV)
686 / vreg->set_points->range[i].step_uV;
687 break;
688 }
689
690 selector += vreg->set_points->range[i].n_voltages;
691 }
692
693 if (selector >= vreg->set_points->n_voltages)
694 goto different_range;
695
696 return selector;
697
698 different_range:
699 return spmi_regulator_select_voltage(vreg, min_uV, max_uV);
700 }
701
702 static int spmi_regulator_common_map_voltage(struct regulator_dev *rdev,
703 int min_uV, int max_uV)
704 {
705 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
706
707 /*
708 * Favor staying in the current voltage range if possible. This avoids
709 * voltage spikes that occur when changing the voltage range.
710 */
711 return spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV);
712 }
713
714 static int
715 spmi_regulator_common_set_voltage(struct regulator_dev *rdev, unsigned selector)
716 {
717 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
718 int ret;
719 u8 buf[2];
720 u8 range_sel, voltage_sel;
721
722 ret = spmi_sw_selector_to_hw(vreg, selector, &range_sel, &voltage_sel);
723 if (ret)
724 return ret;
725
726 buf[0] = range_sel;
727 buf[1] = voltage_sel;
728 return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2);
729 }
730
731 static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
732 unsigned int old_selector, unsigned int new_selector)
733 {
734 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
735 const struct spmi_voltage_range *range;
736 int diff_uV;
737
738 range = spmi_regulator_find_range(vreg);
739 if (!range)
740 return -EINVAL;
741
742 diff_uV = abs(new_selector - old_selector) * range->step_uV;
743
744 return DIV_ROUND_UP(diff_uV, vreg->slew_rate);
745 }
746
747 static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev)
748 {
749 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
750 const struct spmi_voltage_range *range;
751 u8 voltage_sel;
752
753 spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
754
755 range = spmi_regulator_find_range(vreg);
756 if (!range)
757 return -EINVAL;
758
759 return spmi_hw_selector_to_sw(vreg, voltage_sel, range);
760 }
761
762 static int spmi_regulator_single_map_voltage(struct regulator_dev *rdev,
763 int min_uV, int max_uV)
764 {
765 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
766
767 return spmi_regulator_select_voltage(vreg, min_uV, max_uV);
768 }
769
770 static int spmi_regulator_single_range_set_voltage(struct regulator_dev *rdev,
771 unsigned selector)
772 {
773 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
774 u8 sel = selector;
775
776 /*
777 * Certain types of regulators do not have a range select register so
778 * only voltage set register needs to be written.
779 */
780 return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &sel, 1);
781 }
782
783 static int spmi_regulator_single_range_get_voltage(struct regulator_dev *rdev)
784 {
785 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
786 u8 selector;
787 int ret;
788
789 ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &selector, 1);
790 if (ret)
791 return ret;
792
793 return selector;
794 }
795
796 static int spmi_regulator_ult_lo_smps_set_voltage(struct regulator_dev *rdev,
797 unsigned selector)
798 {
799 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
800 int ret;
801 u8 range_sel, voltage_sel;
802
803 ret = spmi_sw_selector_to_hw(vreg, selector, &range_sel, &voltage_sel);
804 if (ret)
805 return ret;
806
807 /*
808 * Calculate VSET based on range
809 * In case of range 0: voltage_sel is a 7 bit value, can be written
810 * witout any modification.
811 * In case of range 1: voltage_sel is a 5 bit value, bits[7-5] set to
812 * [011].
813 */
814 if (range_sel == 1)
815 voltage_sel |= ULT_SMPS_RANGE_SPLIT;
816
817 return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_VOLTAGE_SET,
818 voltage_sel, 0xff);
819 }
820
821 static int spmi_regulator_ult_lo_smps_get_voltage(struct regulator_dev *rdev)
822 {
823 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
824 const struct spmi_voltage_range *range;
825 u8 voltage_sel;
826
827 spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
828
829 range = spmi_regulator_find_range(vreg);
830 if (!range)
831 return -EINVAL;
832
833 if (range->range_sel == 1)
834 voltage_sel &= ~ULT_SMPS_RANGE_SPLIT;
835
836 return spmi_hw_selector_to_sw(vreg, voltage_sel, range);
837 }
838
839 static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
840 unsigned selector)
841 {
842 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
843 int uV = 0;
844 int i;
845
846 if (selector >= vreg->set_points->n_voltages)
847 return 0;
848
849 for (i = 0; i < vreg->set_points->count; i++) {
850 if (selector < vreg->set_points->range[i].n_voltages) {
851 uV = selector * vreg->set_points->range[i].step_uV
852 + vreg->set_points->range[i].set_point_min_uV;
853 break;
854 }
855
856 selector -= vreg->set_points->range[i].n_voltages;
857 }
858
859 return uV;
860 }
861
862 static int
863 spmi_regulator_common_set_bypass(struct regulator_dev *rdev, bool enable)
864 {
865 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
866 u8 mask = SPMI_COMMON_MODE_BYPASS_MASK;
867 u8 val = 0;
868
869 if (enable)
870 val = mask;
871
872 return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
873 }
874
875 static int
876 spmi_regulator_common_get_bypass(struct regulator_dev *rdev, bool *enable)
877 {
878 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
879 u8 val;
880 int ret;
881
882 ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &val, 1);
883 *enable = val & SPMI_COMMON_MODE_BYPASS_MASK;
884
885 return ret;
886 }
887
888 static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev)
889 {
890 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
891 u8 reg;
892
893 spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &reg, 1);
894
895 if (reg & SPMI_COMMON_MODE_HPM_MASK)
896 return REGULATOR_MODE_NORMAL;
897
898 if (reg & SPMI_COMMON_MODE_AUTO_MASK)
899 return REGULATOR_MODE_FAST;
900
901 return REGULATOR_MODE_IDLE;
902 }
903
904 static int
905 spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
906 {
907 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
908 u8 mask = SPMI_COMMON_MODE_HPM_MASK | SPMI_COMMON_MODE_AUTO_MASK;
909 u8 val = 0;
910
911 if (mode == REGULATOR_MODE_NORMAL)
912 val = SPMI_COMMON_MODE_HPM_MASK;
913 else if (mode == REGULATOR_MODE_FAST)
914 val = SPMI_COMMON_MODE_AUTO_MASK;
915
916 return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
917 }
918
919 static int
920 spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
921 {
922 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
923 unsigned int mode;
924
925 if (load_uA >= vreg->hpm_min_load)
926 mode = REGULATOR_MODE_NORMAL;
927 else
928 mode = REGULATOR_MODE_IDLE;
929
930 return spmi_regulator_common_set_mode(rdev, mode);
931 }
932
933 static int spmi_regulator_common_set_pull_down(struct regulator_dev *rdev)
934 {
935 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
936 unsigned int mask = SPMI_COMMON_PULL_DOWN_ENABLE_MASK;
937
938 return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_PULL_DOWN,
939 mask, mask);
940 }
941
942 static int spmi_regulator_common_set_soft_start(struct regulator_dev *rdev)
943 {
944 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
945 unsigned int mask = SPMI_LDO_SOFT_START_ENABLE_MASK;
946
947 return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_SOFT_START,
948 mask, mask);
949 }
950
951 static int spmi_regulator_set_ilim(struct regulator_dev *rdev, int ilim_uA)
952 {
953 struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
954 enum spmi_regulator_logical_type type = vreg->logical_type;
955 unsigned int current_reg;
956 u8 reg;
957 u8 mask = SPMI_BOOST_CURRENT_LIMIT_MASK |
958 SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
959 int max = (SPMI_BOOST_CURRENT_LIMIT_MASK + 1) * 500;
960
961 if (type == SPMI_REGULATOR_LOGICAL_TYPE_BOOST)
962 current_reg = SPMI_BOOST_REG_CURRENT_LIMIT;
963 else
964 current_reg = SPMI_BOOST_BYP_REG_CURRENT_LIMIT;
965
966 if (ilim_uA > max || ilim_uA <= 0)
967 return -EINVAL;
968
969 reg = (ilim_uA - 1) / 500;
970 reg |= SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
971
972 return spmi_vreg_update_bits(vreg, current_reg, reg, mask);
973 }
974
975 static int spmi_regulator_vs_clear_ocp(struct spmi_regulator *vreg)
976 {
977 int ret;
978
979 ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
980 SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
981
982 vreg->vs_enable_time = ktime_get();
983
984 ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
985 SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
986
987 return ret;
988 }
989
990 static void spmi_regulator_vs_ocp_work(struct work_struct *work)
991 {
992 struct delayed_work *dwork = to_delayed_work(work);
993 struct spmi_regulator *vreg
994 = container_of(dwork, struct spmi_regulator, ocp_work);
995
996 spmi_regulator_vs_clear_ocp(vreg);
997 }
998
999 static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data)
1000 {
1001 struct spmi_regulator *vreg = data;
1002 ktime_t ocp_irq_time;
1003 s64 ocp_trigger_delay_us;
1004
1005 ocp_irq_time = ktime_get();
1006 ocp_trigger_delay_us = ktime_us_delta(ocp_irq_time,
1007 vreg->vs_enable_time);
1008
1009 /*
1010 * Reset the OCP count if there is a large delay between switch enable
1011 * and when OCP triggers. This is indicative of a hotplug event as
1012 * opposed to a fault.
1013 */
1014 if (ocp_trigger_delay_us > SPMI_VS_OCP_FAULT_DELAY_US)
1015 vreg->ocp_count = 0;
1016
1017 /* Wait for switch output to settle back to 0 V after OCP triggered. */
1018 udelay(SPMI_VS_OCP_FALL_DELAY_US);
1019
1020 vreg->ocp_count++;
1021
1022 if (vreg->ocp_count == 1) {
1023 /* Immediately clear the over current condition. */
1024 spmi_regulator_vs_clear_ocp(vreg);
1025 } else if (vreg->ocp_count <= vreg->ocp_max_retries) {
1026 /* Schedule the over current clear task to run later. */
1027 schedule_delayed_work(&vreg->ocp_work,
1028 msecs_to_jiffies(vreg->ocp_retry_delay_ms) + 1);
1029 } else {
1030 dev_err(vreg->dev,
1031 "OCP triggered %d times; no further retries\n",
1032 vreg->ocp_count);
1033 }
1034
1035 return IRQ_HANDLED;
1036 }
1037
1038 static struct regulator_ops spmi_smps_ops = {
1039 .enable = regulator_enable_regmap,
1040 .disable = regulator_disable_regmap,
1041 .is_enabled = regulator_is_enabled_regmap,
1042 .set_voltage_sel = spmi_regulator_common_set_voltage,
1043 .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel,
1044 .get_voltage_sel = spmi_regulator_common_get_voltage,
1045 .map_voltage = spmi_regulator_common_map_voltage,
1046 .list_voltage = spmi_regulator_common_list_voltage,
1047 .set_mode = spmi_regulator_common_set_mode,
1048 .get_mode = spmi_regulator_common_get_mode,
1049 .set_load = spmi_regulator_common_set_load,
1050 .set_pull_down = spmi_regulator_common_set_pull_down,
1051 };
1052
1053 static struct regulator_ops spmi_ldo_ops = {
1054 .enable = regulator_enable_regmap,
1055 .disable = regulator_disable_regmap,
1056 .is_enabled = regulator_is_enabled_regmap,
1057 .set_voltage_sel = spmi_regulator_common_set_voltage,
1058 .get_voltage_sel = spmi_regulator_common_get_voltage,
1059 .map_voltage = spmi_regulator_common_map_voltage,
1060 .list_voltage = spmi_regulator_common_list_voltage,
1061 .set_mode = spmi_regulator_common_set_mode,
1062 .get_mode = spmi_regulator_common_get_mode,
1063 .set_load = spmi_regulator_common_set_load,
1064 .set_bypass = spmi_regulator_common_set_bypass,
1065 .get_bypass = spmi_regulator_common_get_bypass,
1066 .set_pull_down = spmi_regulator_common_set_pull_down,
1067 .set_soft_start = spmi_regulator_common_set_soft_start,
1068 };
1069
1070 static struct regulator_ops spmi_ln_ldo_ops = {
1071 .enable = regulator_enable_regmap,
1072 .disable = regulator_disable_regmap,
1073 .is_enabled = regulator_is_enabled_regmap,
1074 .set_voltage_sel = spmi_regulator_common_set_voltage,
1075 .get_voltage_sel = spmi_regulator_common_get_voltage,
1076 .map_voltage = spmi_regulator_common_map_voltage,
1077 .list_voltage = spmi_regulator_common_list_voltage,
1078 .set_bypass = spmi_regulator_common_set_bypass,
1079 .get_bypass = spmi_regulator_common_get_bypass,
1080 };
1081
1082 static struct regulator_ops spmi_vs_ops = {
1083 .enable = spmi_regulator_vs_enable,
1084 .disable = regulator_disable_regmap,
1085 .is_enabled = regulator_is_enabled_regmap,
1086 .set_pull_down = spmi_regulator_common_set_pull_down,
1087 .set_soft_start = spmi_regulator_common_set_soft_start,
1088 .set_over_current_protection = spmi_regulator_vs_ocp,
1089 .set_mode = spmi_regulator_common_set_mode,
1090 .get_mode = spmi_regulator_common_get_mode,
1091 };
1092
1093 static struct regulator_ops spmi_boost_ops = {
1094 .enable = regulator_enable_regmap,
1095 .disable = regulator_disable_regmap,
1096 .is_enabled = regulator_is_enabled_regmap,
1097 .set_voltage_sel = spmi_regulator_single_range_set_voltage,
1098 .get_voltage_sel = spmi_regulator_single_range_get_voltage,
1099 .map_voltage = spmi_regulator_single_map_voltage,
1100 .list_voltage = spmi_regulator_common_list_voltage,
1101 .set_input_current_limit = spmi_regulator_set_ilim,
1102 };
1103
1104 static struct regulator_ops spmi_ftsmps_ops = {
1105 .enable = regulator_enable_regmap,
1106 .disable = regulator_disable_regmap,
1107 .is_enabled = regulator_is_enabled_regmap,
1108 .set_voltage_sel = spmi_regulator_common_set_voltage,
1109 .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel,
1110 .get_voltage_sel = spmi_regulator_common_get_voltage,
1111 .map_voltage = spmi_regulator_common_map_voltage,
1112 .list_voltage = spmi_regulator_common_list_voltage,
1113 .set_mode = spmi_regulator_common_set_mode,
1114 .get_mode = spmi_regulator_common_get_mode,
1115 .set_load = spmi_regulator_common_set_load,
1116 .set_pull_down = spmi_regulator_common_set_pull_down,
1117 };
1118
1119 static struct regulator_ops spmi_ult_lo_smps_ops = {
1120 .enable = regulator_enable_regmap,
1121 .disable = regulator_disable_regmap,
1122 .is_enabled = regulator_is_enabled_regmap,
1123 .set_voltage_sel = spmi_regulator_ult_lo_smps_set_voltage,
1124 .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel,
1125 .get_voltage_sel = spmi_regulator_ult_lo_smps_get_voltage,
1126 .list_voltage = spmi_regulator_common_list_voltage,
1127 .set_mode = spmi_regulator_common_set_mode,
1128 .get_mode = spmi_regulator_common_get_mode,
1129 .set_load = spmi_regulator_common_set_load,
1130 .set_pull_down = spmi_regulator_common_set_pull_down,
1131 };
1132
1133 static struct regulator_ops spmi_ult_ho_smps_ops = {
1134 .enable = regulator_enable_regmap,
1135 .disable = regulator_disable_regmap,
1136 .is_enabled = regulator_is_enabled_regmap,
1137 .set_voltage_sel = spmi_regulator_single_range_set_voltage,
1138 .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel,
1139 .get_voltage_sel = spmi_regulator_single_range_get_voltage,
1140 .map_voltage = spmi_regulator_single_map_voltage,
1141 .list_voltage = spmi_regulator_common_list_voltage,
1142 .set_mode = spmi_regulator_common_set_mode,
1143 .get_mode = spmi_regulator_common_get_mode,
1144 .set_load = spmi_regulator_common_set_load,
1145 .set_pull_down = spmi_regulator_common_set_pull_down,
1146 };
1147
1148 static struct regulator_ops spmi_ult_ldo_ops = {
1149 .enable = regulator_enable_regmap,
1150 .disable = regulator_disable_regmap,
1151 .is_enabled = regulator_is_enabled_regmap,
1152 .set_voltage_sel = spmi_regulator_single_range_set_voltage,
1153 .get_voltage_sel = spmi_regulator_single_range_get_voltage,
1154 .map_voltage = spmi_regulator_single_map_voltage,
1155 .list_voltage = spmi_regulator_common_list_voltage,
1156 .set_mode = spmi_regulator_common_set_mode,
1157 .get_mode = spmi_regulator_common_get_mode,
1158 .set_load = spmi_regulator_common_set_load,
1159 .set_bypass = spmi_regulator_common_set_bypass,
1160 .get_bypass = spmi_regulator_common_get_bypass,
1161 .set_pull_down = spmi_regulator_common_set_pull_down,
1162 .set_soft_start = spmi_regulator_common_set_soft_start,
1163 };
1164
1165 /* Maximum possible digital major revision value */
1166 #define INF 0xFF
1167
1168 static const struct spmi_regulator_mapping supported_regulators[] = {
1169 /* type subtype dig_min dig_max ltype ops setpoints hpm_min */
1170 SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000),
1171 SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000),
1172 SPMI_VREG(LDO, N600, 0, 0, LDO, ldo, nldo2, 10000),
1173 SPMI_VREG(LDO, N1200, 0, 0, LDO, ldo, nldo2, 10000),
1174 SPMI_VREG(LDO, N600, 1, INF, LDO, ldo, nldo3, 10000),
1175 SPMI_VREG(LDO, N1200, 1, INF, LDO, ldo, nldo3, 10000),
1176 SPMI_VREG(LDO, N600_ST, 0, 0, LDO, ldo, nldo2, 10000),
1177 SPMI_VREG(LDO, N1200_ST, 0, 0, LDO, ldo, nldo2, 10000),
1178 SPMI_VREG(LDO, N600_ST, 1, INF, LDO, ldo, nldo3, 10000),
1179 SPMI_VREG(LDO, N1200_ST, 1, INF, LDO, ldo, nldo3, 10000),
1180 SPMI_VREG(LDO, P50, 0, INF, LDO, ldo, pldo, 5000),
1181 SPMI_VREG(LDO, P150, 0, INF, LDO, ldo, pldo, 10000),
1182 SPMI_VREG(LDO, P300, 0, INF, LDO, ldo, pldo, 10000),
1183 SPMI_VREG(LDO, P600, 0, INF, LDO, ldo, pldo, 10000),
1184 SPMI_VREG(LDO, P1200, 0, INF, LDO, ldo, pldo, 10000),
1185 SPMI_VREG(LDO, LN, 0, INF, LN_LDO, ln_ldo, ln_ldo, 0),
1186 SPMI_VREG(LDO, LV_P50, 0, INF, LDO, ldo, pldo, 5000),
1187 SPMI_VREG(LDO, LV_P150, 0, INF, LDO, ldo, pldo, 10000),
1188 SPMI_VREG(LDO, LV_P300, 0, INF, LDO, ldo, pldo, 10000),
1189 SPMI_VREG(LDO, LV_P600, 0, INF, LDO, ldo, pldo, 10000),
1190 SPMI_VREG(LDO, LV_P1200, 0, INF, LDO, ldo, pldo, 10000),
1191 SPMI_VREG_VS(LV100, 0, INF),
1192 SPMI_VREG_VS(LV300, 0, INF),
1193 SPMI_VREG_VS(MV300, 0, INF),
1194 SPMI_VREG_VS(MV500, 0, INF),
1195 SPMI_VREG_VS(HDMI, 0, INF),
1196 SPMI_VREG_VS(OTG, 0, INF),
1197 SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST, boost, boost, 0),
1198 SPMI_VREG(FTS, FTS_CTL, 0, INF, FTSMPS, ftsmps, ftsmps, 100000),
1199 SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000),
1200 SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0),
1201 SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps,
1202 ult_lo_smps, 100000),
1203 SPMI_VREG(ULT_BUCK, ULT_HF_CTL2, 0, INF, ULT_LO_SMPS, ult_lo_smps,
1204 ult_lo_smps, 100000),
1205 SPMI_VREG(ULT_BUCK, ULT_HF_CTL3, 0, INF, ULT_LO_SMPS, ult_lo_smps,
1206 ult_lo_smps, 100000),
1207 SPMI_VREG(ULT_BUCK, ULT_HF_CTL4, 0, INF, ULT_HO_SMPS, ult_ho_smps,
1208 ult_ho_smps, 100000),
1209 SPMI_VREG(ULT_LDO, N300_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
1210 SPMI_VREG(ULT_LDO, N600_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
1211 SPMI_VREG(ULT_LDO, N900_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
1212 SPMI_VREG(ULT_LDO, N1200_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
1213 SPMI_VREG(ULT_LDO, LV_P150, 0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1214 SPMI_VREG(ULT_LDO, LV_P300, 0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1215 SPMI_VREG(ULT_LDO, LV_P450, 0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1216 SPMI_VREG(ULT_LDO, P600, 0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1217 SPMI_VREG(ULT_LDO, P150, 0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
1218 SPMI_VREG(ULT_LDO, P50, 0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
1219 };
1220
1221 static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
1222 {
1223 unsigned int n;
1224 struct spmi_voltage_range *range = points->range;
1225
1226 for (; range < points->range + points->count; range++) {
1227 n = 0;
1228 if (range->set_point_max_uV) {
1229 n = range->set_point_max_uV - range->set_point_min_uV;
1230 n = (n / range->step_uV) + 1;
1231 }
1232 range->n_voltages = n;
1233 points->n_voltages += n;
1234 }
1235 }
1236
1237 static int spmi_regulator_match(struct spmi_regulator *vreg, u16 force_type)
1238 {
1239 const struct spmi_regulator_mapping *mapping;
1240 int ret, i;
1241 u32 dig_major_rev;
1242 u8 version[SPMI_COMMON_REG_SUBTYPE - SPMI_COMMON_REG_DIG_MAJOR_REV + 1];
1243 u8 type, subtype;
1244
1245 ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_DIG_MAJOR_REV, version,
1246 ARRAY_SIZE(version));
1247 if (ret) {
1248 dev_dbg(vreg->dev, "could not read version registers\n");
1249 return ret;
1250 }
1251 dig_major_rev = version[SPMI_COMMON_REG_DIG_MAJOR_REV
1252 - SPMI_COMMON_REG_DIG_MAJOR_REV];
1253 if (!force_type) {
1254 type = version[SPMI_COMMON_REG_TYPE -
1255 SPMI_COMMON_REG_DIG_MAJOR_REV];
1256 subtype = version[SPMI_COMMON_REG_SUBTYPE -
1257 SPMI_COMMON_REG_DIG_MAJOR_REV];
1258 } else {
1259 type = force_type >> 8;
1260 subtype = force_type;
1261 }
1262
1263 for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
1264 mapping = &supported_regulators[i];
1265 if (mapping->type == type && mapping->subtype == subtype
1266 && mapping->revision_min <= dig_major_rev
1267 && mapping->revision_max >= dig_major_rev)
1268 goto found;
1269 }
1270
1271 dev_err(vreg->dev,
1272 "unsupported regulator: name=%s type=0x%02X, subtype=0x%02X, dig major rev=0x%02X\n",
1273 vreg->desc.name, type, subtype, dig_major_rev);
1274
1275 return -ENODEV;
1276
1277 found:
1278 vreg->logical_type = mapping->logical_type;
1279 vreg->set_points = mapping->set_points;
1280 vreg->hpm_min_load = mapping->hpm_min_load;
1281 vreg->desc.ops = mapping->ops;
1282
1283 if (mapping->set_points) {
1284 if (!mapping->set_points->n_voltages)
1285 spmi_calculate_num_voltages(mapping->set_points);
1286 vreg->desc.n_voltages = mapping->set_points->n_voltages;
1287 }
1288
1289 return 0;
1290 }
1291
1292 static int spmi_regulator_init_slew_rate(struct spmi_regulator *vreg)
1293 {
1294 int ret;
1295 u8 reg = 0;
1296 int step, delay, slew_rate, step_delay;
1297 const struct spmi_voltage_range *range;
1298
1299 ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, &reg, 1);
1300 if (ret) {
1301 dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
1302 return ret;
1303 }
1304
1305 range = spmi_regulator_find_range(vreg);
1306 if (!range)
1307 return -EINVAL;
1308
1309 switch (vreg->logical_type) {
1310 case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS:
1311 step_delay = SPMI_FTSMPS_STEP_DELAY;
1312 break;
1313 default:
1314 step_delay = SPMI_DEFAULT_STEP_DELAY;
1315 break;
1316 }
1317
1318 step = reg & SPMI_FTSMPS_STEP_CTRL_STEP_MASK;
1319 step >>= SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT;
1320
1321 delay = reg & SPMI_FTSMPS_STEP_CTRL_DELAY_MASK;
1322 delay >>= SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT;
1323
1324 /* slew_rate has units of uV/us */
1325 slew_rate = SPMI_FTSMPS_CLOCK_RATE * range->step_uV * (1 << step);
1326 slew_rate /= 1000 * (step_delay << delay);
1327 slew_rate *= SPMI_FTSMPS_STEP_MARGIN_NUM;
1328 slew_rate /= SPMI_FTSMPS_STEP_MARGIN_DEN;
1329
1330 /* Ensure that the slew rate is greater than 0 */
1331 vreg->slew_rate = max(slew_rate, 1);
1332
1333 return ret;
1334 }
1335
1336 static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
1337 const struct spmi_regulator_init_data *data)
1338 {
1339 int ret;
1340 enum spmi_regulator_logical_type type;
1341 u8 ctrl_reg[8], reg, mask;
1342
1343 type = vreg->logical_type;
1344
1345 ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
1346 if (ret)
1347 return ret;
1348
1349 /* Set up enable pin control. */
1350 if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
1351 || type == SPMI_REGULATOR_LOGICAL_TYPE_LDO
1352 || type == SPMI_REGULATOR_LOGICAL_TYPE_VS)
1353 && !(data->pin_ctrl_enable
1354 & SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT)) {
1355 ctrl_reg[SPMI_COMMON_IDX_ENABLE] &=
1356 ~SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
1357 ctrl_reg[SPMI_COMMON_IDX_ENABLE] |=
1358 data->pin_ctrl_enable & SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
1359 }
1360
1361 /* Set up mode pin control. */
1362 if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
1363 || type == SPMI_REGULATOR_LOGICAL_TYPE_LDO)
1364 && !(data->pin_ctrl_hpm
1365 & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
1366 ctrl_reg[SPMI_COMMON_IDX_MODE] &=
1367 ~SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
1368 ctrl_reg[SPMI_COMMON_IDX_MODE] |=
1369 data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
1370 }
1371
1372 if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS
1373 && !(data->pin_ctrl_hpm & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
1374 ctrl_reg[SPMI_COMMON_IDX_MODE] &=
1375 ~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
1376 ctrl_reg[SPMI_COMMON_IDX_MODE] |=
1377 data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
1378 }
1379
1380 if ((type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS
1381 || type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS
1382 || type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO)
1383 && !(data->pin_ctrl_hpm
1384 & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
1385 ctrl_reg[SPMI_COMMON_IDX_MODE] &=
1386 ~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
1387 ctrl_reg[SPMI_COMMON_IDX_MODE] |=
1388 data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
1389 }
1390
1391 /* Write back any control register values that were modified. */
1392 ret = spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, ctrl_reg, 8);
1393 if (ret)
1394 return ret;
1395
1396 /* Set soft start strength and over current protection for VS. */
1397 if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS) {
1398 if (data->vs_soft_start_strength
1399 != SPMI_VS_SOFT_START_STR_HW_DEFAULT) {
1400 reg = data->vs_soft_start_strength
1401 & SPMI_VS_SOFT_START_SEL_MASK;
1402 mask = SPMI_VS_SOFT_START_SEL_MASK;
1403 return spmi_vreg_update_bits(vreg,
1404 SPMI_VS_REG_SOFT_START,
1405 reg, mask);
1406 }
1407 }
1408
1409 return 0;
1410 }
1411
1412 static void spmi_regulator_get_dt_config(struct spmi_regulator *vreg,
1413 struct device_node *node, struct spmi_regulator_init_data *data)
1414 {
1415 /*
1416 * Initialize configuration parameters to use hardware default in case
1417 * no value is specified via device tree.
1418 */
1419 data->pin_ctrl_enable = SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT;
1420 data->pin_ctrl_hpm = SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT;
1421 data->vs_soft_start_strength = SPMI_VS_SOFT_START_STR_HW_DEFAULT;
1422
1423 /* These bindings are optional, so it is okay if they aren't found. */
1424 of_property_read_u32(node, "qcom,ocp-max-retries",
1425 &vreg->ocp_max_retries);
1426 of_property_read_u32(node, "qcom,ocp-retry-delay",
1427 &vreg->ocp_retry_delay_ms);
1428 of_property_read_u32(node, "qcom,pin-ctrl-enable",
1429 &data->pin_ctrl_enable);
1430 of_property_read_u32(node, "qcom,pin-ctrl-hpm", &data->pin_ctrl_hpm);
1431 of_property_read_u32(node, "qcom,vs-soft-start-strength",
1432 &data->vs_soft_start_strength);
1433 }
1434
1435 static unsigned int spmi_regulator_of_map_mode(unsigned int mode)
1436 {
1437 if (mode == 1)
1438 return REGULATOR_MODE_NORMAL;
1439 if (mode == 2)
1440 return REGULATOR_MODE_FAST;
1441
1442 return REGULATOR_MODE_IDLE;
1443 }
1444
1445 static int spmi_regulator_of_parse(struct device_node *node,
1446 const struct regulator_desc *desc,
1447 struct regulator_config *config)
1448 {
1449 struct spmi_regulator_init_data data = { };
1450 struct spmi_regulator *vreg = config->driver_data;
1451 struct device *dev = config->dev;
1452 int ret;
1453
1454 spmi_regulator_get_dt_config(vreg, node, &data);
1455
1456 if (!vreg->ocp_max_retries)
1457 vreg->ocp_max_retries = SPMI_VS_OCP_DEFAULT_MAX_RETRIES;
1458 if (!vreg->ocp_retry_delay_ms)
1459 vreg->ocp_retry_delay_ms = SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS;
1460
1461 ret = spmi_regulator_init_registers(vreg, &data);
1462 if (ret) {
1463 dev_err(dev, "common initialization failed, ret=%d\n", ret);
1464 return ret;
1465 }
1466
1467 switch (vreg->logical_type) {
1468 case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS:
1469 case SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS:
1470 case SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS:
1471 case SPMI_REGULATOR_LOGICAL_TYPE_SMPS:
1472 ret = spmi_regulator_init_slew_rate(vreg);
1473 if (ret)
1474 return ret;
1475 default:
1476 break;
1477 }
1478
1479 if (vreg->logical_type != SPMI_REGULATOR_LOGICAL_TYPE_VS)
1480 vreg->ocp_irq = 0;
1481
1482 if (vreg->ocp_irq) {
1483 ret = devm_request_irq(dev, vreg->ocp_irq,
1484 spmi_regulator_vs_ocp_isr, IRQF_TRIGGER_RISING, "ocp",
1485 vreg);
1486 if (ret < 0) {
1487 dev_err(dev, "failed to request irq %d, ret=%d\n",
1488 vreg->ocp_irq, ret);
1489 return ret;
1490 }
1491
1492 INIT_DELAYED_WORK(&vreg->ocp_work, spmi_regulator_vs_ocp_work);
1493 }
1494
1495 return 0;
1496 }
1497
1498 static const struct spmi_regulator_data pm8941_regulators[] = {
1499 { "s1", 0x1400, "vdd_s1", },
1500 { "s2", 0x1700, "vdd_s2", },
1501 { "s3", 0x1a00, "vdd_s3", },
1502 { "s4", 0xa000, },
1503 { "l1", 0x4000, "vdd_l1_l3", },
1504 { "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
1505 { "l3", 0x4200, "vdd_l1_l3", },
1506 { "l4", 0x4300, "vdd_l4_l11", },
1507 { "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
1508 { "l6", 0x4500, "vdd_l6_l12_l14_l15", },
1509 { "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
1510 { "l8", 0x4700, "vdd_l8_l16_l18_19", },
1511 { "l9", 0x4800, "vdd_l9_l10_l17_l22", },
1512 { "l10", 0x4900, "vdd_l9_l10_l17_l22", },
1513 { "l11", 0x4a00, "vdd_l4_l11", },
1514 { "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
1515 { "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
1516 { "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
1517 { "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
1518 { "l16", 0x4f00, "vdd_l8_l16_l18_19", },
1519 { "l17", 0x5000, "vdd_l9_l10_l17_l22", },
1520 { "l18", 0x5100, "vdd_l8_l16_l18_19", },
1521 { "l19", 0x5200, "vdd_l8_l16_l18_19", },
1522 { "l20", 0x5300, "vdd_l13_l20_l23_l24", },
1523 { "l21", 0x5400, "vdd_l21", },
1524 { "l22", 0x5500, "vdd_l9_l10_l17_l22", },
1525 { "l23", 0x5600, "vdd_l13_l20_l23_l24", },
1526 { "l24", 0x5700, "vdd_l13_l20_l23_l24", },
1527 { "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
1528 { "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
1529 { "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
1530 { "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
1531 { "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
1532 { }
1533 };
1534
1535 static const struct spmi_regulator_data pm8841_regulators[] = {
1536 { "s1", 0x1400, "vdd_s1", },
1537 { "s2", 0x1700, "vdd_s2", NULL, 0x1c08 },
1538 { "s3", 0x1a00, "vdd_s3", },
1539 { "s4", 0x1d00, "vdd_s4", NULL, 0x1c08 },
1540 { "s5", 0x2000, "vdd_s5", NULL, 0x1c08 },
1541 { "s6", 0x2300, "vdd_s6", NULL, 0x1c08 },
1542 { "s7", 0x2600, "vdd_s7", NULL, 0x1c08 },
1543 { "s8", 0x2900, "vdd_s8", NULL, 0x1c08 },
1544 { }
1545 };
1546
1547 static const struct spmi_regulator_data pm8916_regulators[] = {
1548 { "s1", 0x1400, "vdd_s1", },
1549 { "s2", 0x1700, "vdd_s2", },
1550 { "s3", 0x1a00, "vdd_s3", },
1551 { "s4", 0x1d00, "vdd_s4", },
1552 { "l1", 0x4000, "vdd_l1_l3", },
1553 { "l2", 0x4100, "vdd_l2", },
1554 { "l3", 0x4200, "vdd_l1_l3", },
1555 { "l4", 0x4300, "vdd_l4_l5_l6", },
1556 { "l5", 0x4400, "vdd_l4_l5_l6", },
1557 { "l6", 0x4500, "vdd_l4_l5_l6", },
1558 { "l7", 0x4600, "vdd_l7", },
1559 { "l8", 0x4700, "vdd_l8_l11_l14_l15_l16", },
1560 { "l9", 0x4800, "vdd_l9_l10_l12_l13_l17_l18", },
1561 { "l10", 0x4900, "vdd_l9_l10_l12_l13_l17_l18", },
1562 { "l11", 0x4a00, "vdd_l8_l11_l14_l15_l16", },
1563 { "l12", 0x4b00, "vdd_l9_l10_l12_l13_l17_l18", },
1564 { "l13", 0x4c00, "vdd_l9_l10_l12_l13_l17_l18", },
1565 { "l14", 0x4d00, "vdd_l8_l11_l14_l15_l16", },
1566 { "l15", 0x4e00, "vdd_l8_l11_l14_l15_l16", },
1567 { "l16", 0x4f00, "vdd_l8_l11_l14_l15_l16", },
1568 { "l17", 0x5000, "vdd_l9_l10_l12_l13_l17_l18", },
1569 { "l18", 0x5100, "vdd_l9_l10_l12_l13_l17_l18", },
1570 { }
1571 };
1572
1573 static const struct spmi_regulator_data pm8994_regulators[] = {
1574 { "s1", 0x1400, "vdd_s1", },
1575 { "s2", 0x1700, "vdd_s2", },
1576 { "s3", 0x1a00, "vdd_s3", },
1577 { "s4", 0x1d00, "vdd_s4", },
1578 { "s5", 0x2000, "vdd_s5", },
1579 { "s6", 0x2300, "vdd_s6", },
1580 { "s7", 0x2600, "vdd_s7", },
1581 { "s8", 0x2900, "vdd_s8", },
1582 { "s9", 0x2c00, "vdd_s9", },
1583 { "s10", 0x2f00, "vdd_s10", },
1584 { "s11", 0x3200, "vdd_s11", },
1585 { "s12", 0x3500, "vdd_s12", },
1586 { "l1", 0x4000, "vdd_l1", },
1587 { "l2", 0x4100, "vdd_l2_l26_l28", },
1588 { "l3", 0x4200, "vdd_l3_l11", },
1589 { "l4", 0x4300, "vdd_l4_l27_l31", },
1590 { "l5", 0x4400, "vdd_l5_l7", },
1591 { "l6", 0x4500, "vdd_l6_l12_l32", },
1592 { "l7", 0x4600, "vdd_l5_l7", },
1593 { "l8", 0x4700, "vdd_l8_l16_l30", },
1594 { "l9", 0x4800, "vdd_l9_l10_l18_l22", },
1595 { "l10", 0x4900, "vdd_l9_l10_l18_l22", },
1596 { "l11", 0x4a00, "vdd_l3_l11", },
1597 { "l12", 0x4b00, "vdd_l6_l12_l32", },
1598 { "l13", 0x4c00, "vdd_l13_l19_l23_l24", },
1599 { "l14", 0x4d00, "vdd_l14_l15", },
1600 { "l15", 0x4e00, "vdd_l14_l15", },
1601 { "l16", 0x4f00, "vdd_l8_l16_l30", },
1602 { "l17", 0x5000, "vdd_l17_l29", },
1603 { "l18", 0x5100, "vdd_l9_l10_l18_l22", },
1604 { "l19", 0x5200, "vdd_l13_l19_l23_l24", },
1605 { "l20", 0x5300, "vdd_l20_l21", },
1606 { "l21", 0x5400, "vdd_l20_l21", },
1607 { "l22", 0x5500, "vdd_l9_l10_l18_l22", },
1608 { "l23", 0x5600, "vdd_l13_l19_l23_l24", },
1609 { "l24", 0x5700, "vdd_l13_l19_l23_l24", },
1610 { "l25", 0x5800, "vdd_l25", },
1611 { "l26", 0x5900, "vdd_l2_l26_l28", },
1612 { "l27", 0x5a00, "vdd_l4_l27_l31", },
1613 { "l28", 0x5b00, "vdd_l2_l26_l28", },
1614 { "l29", 0x5c00, "vdd_l17_l29", },
1615 { "l30", 0x5d00, "vdd_l8_l16_l30", },
1616 { "l31", 0x5e00, "vdd_l4_l27_l31", },
1617 { "l32", 0x5f00, "vdd_l6_l12_l32", },
1618 { "lvs1", 0x8000, "vdd_lvs_1_2", },
1619 { "lvs2", 0x8100, "vdd_lvs_1_2", },
1620 { }
1621 };
1622
1623 static const struct spmi_regulator_data pmi8994_regulators[] = {
1624 { "s1", 0x1400, "vdd_s1", },
1625 { "s2", 0x1700, "vdd_s2", },
1626 { "s3", 0x1a00, "vdd_s3", },
1627 { "l1", 0x4000, "vdd_l1", },
1628 { }
1629 };
1630
1631 static const struct of_device_id qcom_spmi_regulator_match[] = {
1632 { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
1633 { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
1634 { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
1635 { .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
1636 { .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
1637 { }
1638 };
1639 MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
1640
1641 static int qcom_spmi_regulator_probe(struct platform_device *pdev)
1642 {
1643 const struct spmi_regulator_data *reg;
1644 const struct of_device_id *match;
1645 struct regulator_config config = { };
1646 struct regulator_dev *rdev;
1647 struct spmi_regulator *vreg;
1648 struct regmap *regmap;
1649 const char *name;
1650 struct device *dev = &pdev->dev;
1651 int ret;
1652 struct list_head *vreg_list;
1653
1654 vreg_list = devm_kzalloc(dev, sizeof(*vreg_list), GFP_KERNEL);
1655 if (!vreg_list)
1656 return -ENOMEM;
1657 INIT_LIST_HEAD(vreg_list);
1658 platform_set_drvdata(pdev, vreg_list);
1659
1660 regmap = dev_get_regmap(dev->parent, NULL);
1661 if (!regmap)
1662 return -ENODEV;
1663
1664 match = of_match_device(qcom_spmi_regulator_match, &pdev->dev);
1665 if (!match)
1666 return -ENODEV;
1667
1668 for (reg = match->data; reg->name; reg++) {
1669 vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
1670 if (!vreg)
1671 return -ENOMEM;
1672
1673 vreg->dev = dev;
1674 vreg->base = reg->base;
1675 vreg->regmap = regmap;
1676
1677 if (reg->ocp) {
1678 vreg->ocp_irq = platform_get_irq_byname(pdev, reg->ocp);
1679 if (vreg->ocp_irq < 0) {
1680 ret = vreg->ocp_irq;
1681 goto err;
1682 }
1683 }
1684
1685 vreg->desc.id = -1;
1686 vreg->desc.owner = THIS_MODULE;
1687 vreg->desc.type = REGULATOR_VOLTAGE;
1688 vreg->desc.enable_reg = reg->base + SPMI_COMMON_REG_ENABLE;
1689 vreg->desc.enable_mask = SPMI_COMMON_ENABLE_MASK;
1690 vreg->desc.enable_val = SPMI_COMMON_ENABLE;
1691 vreg->desc.name = name = reg->name;
1692 vreg->desc.supply_name = reg->supply;
1693 vreg->desc.of_match = reg->name;
1694 vreg->desc.of_parse_cb = spmi_regulator_of_parse;
1695 vreg->desc.of_map_mode = spmi_regulator_of_map_mode;
1696
1697 ret = spmi_regulator_match(vreg, reg->force_type);
1698 if (ret)
1699 continue;
1700
1701 config.dev = dev;
1702 config.driver_data = vreg;
1703 config.regmap = regmap;
1704 rdev = devm_regulator_register(dev, &vreg->desc, &config);
1705 if (IS_ERR(rdev)) {
1706 dev_err(dev, "failed to register %s\n", name);
1707 ret = PTR_ERR(rdev);
1708 goto err;
1709 }
1710
1711 INIT_LIST_HEAD(&vreg->node);
1712 list_add(&vreg->node, vreg_list);
1713 }
1714
1715 return 0;
1716
1717 err:
1718 list_for_each_entry(vreg, vreg_list, node)
1719 if (vreg->ocp_irq)
1720 cancel_delayed_work_sync(&vreg->ocp_work);
1721 return ret;
1722 }
1723
1724 static int qcom_spmi_regulator_remove(struct platform_device *pdev)
1725 {
1726 struct spmi_regulator *vreg;
1727 struct list_head *vreg_list = platform_get_drvdata(pdev);
1728
1729 list_for_each_entry(vreg, vreg_list, node)
1730 if (vreg->ocp_irq)
1731 cancel_delayed_work_sync(&vreg->ocp_work);
1732
1733 return 0;
1734 }
1735
1736 static struct platform_driver qcom_spmi_regulator_driver = {
1737 .driver = {
1738 .name = "qcom-spmi-regulator",
1739 .of_match_table = qcom_spmi_regulator_match,
1740 },
1741 .probe = qcom_spmi_regulator_probe,
1742 .remove = qcom_spmi_regulator_remove,
1743 };
1744 module_platform_driver(qcom_spmi_regulator_driver);
1745
1746 MODULE_DESCRIPTION("Qualcomm SPMI PMIC regulator driver");
1747 MODULE_LICENSE("GPL v2");
1748 MODULE_ALIAS("platform:qcom-spmi-regulator");
Ubuntu Jammy Linux kernel mirror