1 # SPDX-License-Identifier: GPL-2.0-only
2 menu "Remoteproc drivers"
5 tristate "Support for Remote Processor subsystem"
10 select WANT_DEV_COREDUMP
12 Support for remote processors (such as DSP coprocessors). These
13 are mainly used on embedded systems.
18 tristate "IMX6/7 remoteproc support"
19 depends on SOC_IMX6SX || SOC_IMX7D
21 Say y here to support iMX's remote processors (Cortex M4
22 on iMX7D) via the remote processor framework.
24 It's safe to say N here.
26 config OMAP_REMOTEPROC
27 tristate "OMAP remoteproc support"
28 depends on ARCH_OMAP4 || SOC_OMAP5
33 Say y here to support OMAP's remote processors (dual M3
34 and DSP on OMAP4) via the remote processor framework.
36 Currently only supported on OMAP4.
38 Usually you want to say Y here, in order to enable multimedia
39 use-cases to run on your platform (multimedia codecs are
40 offloaded to remote DSP processors using this framework).
42 It's safe to say N here if you're not interested in multimedia
43 offloading or just want a bare minimum kernel.
46 tristate "AMx3xx Wakeup M3 remoteproc support"
47 depends on SOC_AM33XX || SOC_AM43XX
49 Say y here to support Wakeup M3 remote processor on TI AM33xx
50 and AM43xx family of SoCs.
52 Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
53 for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
54 firmware onto these remote processors.
57 config DA8XX_REMOTEPROC
58 tristate "DA8xx/OMAP-L13x remoteproc support"
59 depends on ARCH_DAVINCI_DA8XX
62 Say y here to support DA8xx/OMAP-L13x remote processors via the
63 remote processor framework.
65 You want to say y here in order to enable AMP
66 use-cases to run on your platform (multimedia codecs are
67 offloaded to remote DSP processors using this framework).
69 This module controls the name of the firmware file that gets
70 loaded on the DSP. This file must reside in the /lib/firmware
71 directory. It can be specified via the module parameter
72 da8xx_fw_name=<filename>, and if not specified will default to
75 It's safe to say n here if you're not interested in multimedia
78 config KEYSTONE_REMOTEPROC
79 tristate "Keystone Remoteproc support"
80 depends on ARCH_KEYSTONE
82 Say Y here here to support Keystone remote processors (DSP)
83 via the remote processor framework.
85 It's safe to say N here if you're not interested in the Keystone
86 DSPs or just want to use a bare minimum kernel.
88 config QCOM_RPROC_COMMON
91 config QCOM_Q6V5_COMMON
97 tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
98 depends on OF && ARCH_QCOM
100 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
101 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
102 depends on QCOM_SYSMON || QCOM_SYSMON=n
104 select QCOM_MDT_LOADER
105 select QCOM_Q6V5_COMMON
106 select QCOM_RPROC_COMMON
108 Say y here to support the Peripheral Image Loader
109 for the Qualcomm Technology Inc. ADSP remote processors.
112 tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
113 depends on OF && ARCH_QCOM
115 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
116 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
117 depends on QCOM_SYSMON || QCOM_SYSMON=n
119 select QCOM_Q6V5_COMMON
120 select QCOM_RPROC_COMMON
123 Say y here to support the Qualcomm self-authenticating modem
124 subsystem based on Hexagon V5.
127 tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
128 depends on OF && ARCH_QCOM
130 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
131 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
132 depends on QCOM_SYSMON || QCOM_SYSMON=n
134 select QCOM_MDT_LOADER
135 select QCOM_Q6V5_COMMON
136 select QCOM_RPROC_COMMON
139 Say y here to support the TrustZone based Peripherial Image Loader
140 for the Qualcomm Hexagon v5 based remote processors. This is commonly
141 used to control subsystems such as ADSP, Compute and Sensor.
143 config QCOM_Q6V5_WCSS
144 tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
145 depends on OF && ARCH_QCOM
147 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
148 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
149 depends on QCOM_SYSMON || QCOM_SYSMON=n
151 select QCOM_MDT_LOADER
152 select QCOM_Q6V5_COMMON
153 select QCOM_RPROC_COMMON
156 Say y here to support the Qualcomm Peripheral Image Loader for the
157 Hexagon V5 based WCSS remote processors.
160 tristate "Qualcomm sysmon driver"
164 select QCOM_QMI_HELPERS
166 The sysmon driver implements a sysmon QMI client and a handler for
167 the sys_mon SMD and GLINK channel, which are used for graceful
168 shutdown, retrieving failure information and propagating information
169 about other subsystems being shut down.
171 Say y here if your system runs firmware on any other subsystems, e.g.
174 config QCOM_WCNSS_PIL
175 tristate "Qualcomm WCNSS Peripheral Image Loader"
176 depends on OF && ARCH_QCOM
177 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
178 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
180 depends on QCOM_SYSMON || QCOM_SYSMON=n
181 select QCOM_MDT_LOADER
182 select QCOM_RPROC_COMMON
185 Say y here to support the Peripheral Image Loader for the Qualcomm
186 Wireless Connectivity Subsystem.
189 tristate "ST remoteproc support"
194 Say y here to support ST's adjunct processors via the remote
196 This can be either built-in or a loadable module.
198 config ST_SLIM_REMOTEPROC