drivers/remoteproc/Kconfig

   1 menu "Remoteproc drivers"
   2
   3 config REMOTEPROC
   4         tristate "Support for Remote Processor subsystem"
   5         depends on HAS_DMA
   6         select CRC32
   7         select FW_LOADER
   8         select VIRTIO
   9         select WANT_DEV_COREDUMP
  10         help
  11           Support for remote processors (such as DSP coprocessors). These
  12           are mainly used on embedded systems.
  13
  14 if REMOTEPROC
  15
  16 config IMX_REMOTEPROC
  17         tristate "IMX6/7 remoteproc support"
  18         depends on SOC_IMX6SX || SOC_IMX7D
  19         help
  20           Say y here to support iMX's remote processors (Cortex M4
  21           on iMX7D) via the remote processor framework.
  22
  23           It's safe to say N here.
  24
  25 config OMAP_REMOTEPROC
  26         tristate "OMAP remoteproc support"
  27         depends on HAS_DMA
  28         depends on ARCH_OMAP4 || SOC_OMAP5
  29         depends on OMAP_IOMMU
  30         select MAILBOX
  31         select OMAP2PLUS_MBOX
  32         help
  33           Say y here to support OMAP's remote processors (dual M3
  34           and DSP on OMAP4) via the remote processor framework.
  35
  36           Currently only supported on OMAP4.
  37
  38           Usually you want to say Y here, in order to enable multimedia
  39           use-cases to run on your platform (multimedia codecs are
  40           offloaded to remote DSP processors using this framework).
  41
  42           It's safe to say N here if you're not interested in multimedia
  43           offloading or just want a bare minimum kernel.
  44
  45 config WKUP_M3_RPROC
  46         tristate "AMx3xx Wakeup M3 remoteproc support"
  47         depends on SOC_AM33XX || SOC_AM43XX
  48         help
  49           Say y here to support Wakeup M3 remote processor on TI AM33xx
  50           and AM43xx family of SoCs.
  51
  52           Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
  53           for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
  54           firmware onto these remote processors.
  55           If unsure say N.
  56
  57 config DA8XX_REMOTEPROC
  58         tristate "DA8xx/OMAP-L13x remoteproc support"
  59         depends on ARCH_DAVINCI_DA8XX
  60         depends on DMA_CMA
  61         help
  62           Say y here to support DA8xx/OMAP-L13x remote processors via the
  63           remote processor framework.
  64
  65           You want to say y here in order to enable AMP
  66           use-cases to run on your platform (multimedia codecs are
  67           offloaded to remote DSP processors using this framework).
  68
  69           This module controls the name of the firmware file that gets
  70           loaded on the DSP.  This file must reside in the /lib/firmware
  71           directory.  It can be specified via the module parameter
  72           da8xx_fw_name=<filename>, and if not specified will default to
  73           "rproc-dsp-fw".
  74
  75           It's safe to say n here if you're not interested in multimedia
  76           offloading.
  77
  78 config KEYSTONE_REMOTEPROC
  79         tristate "Keystone Remoteproc support"
  80         depends on ARCH_KEYSTONE
  81         help
  82           Say Y here here to support Keystone remote processors (DSP)
  83           via the remote processor framework.
  84
  85           It's safe to say N here if you're not interested in the Keystone
  86           DSPs or just want to use a bare minimum kernel.
  87
  88 config QCOM_ADSP_PIL
  89         tristate "Qualcomm ADSP Peripheral Image Loader"
  90         depends on OF && ARCH_QCOM
  91         depends on QCOM_SMEM
  92         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
  93         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
  94         depends on QCOM_SYSMON || QCOM_SYSMON=n
  95         select MFD_SYSCON
  96         select QCOM_MDT_LOADER
  97         select QCOM_RPROC_COMMON
  98         select QCOM_SCM
  99         help
 100           Say y here to support the TrustZone based Peripherial Image Loader
 101           for the Qualcomm ADSP remote processors.
 102
 103 config QCOM_RPROC_COMMON
 104         tristate
 105
 106 config QCOM_Q6V5_PIL
 107         tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
 108         depends on OF && ARCH_QCOM
 109         depends on QCOM_SMEM
 110         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 111         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 112         depends on QCOM_SYSMON || QCOM_SYSMON=n
 113         select MFD_SYSCON
 114         select QCOM_RPROC_COMMON
 115         select QCOM_SCM
 116         help
 117           Say y here to support the Qualcomm Peripherial Image Loader for the
 118           Hexagon V5 based remote processors.
 119
 120 config QCOM_SYSMON
 121         tristate "Qualcomm sysmon driver"
 122         depends on RPMSG
 123         depends on ARCH_QCOM
 124         select QCOM_QMI_HELPERS
 125         help
 126           The sysmon driver implements a sysmon QMI client and a handler for
 127           the sys_mon SMD and GLINK channel, which are used for graceful
 128           shutdown, retrieving failure information and propagating information
 129           about other subsystems being shut down.
 130
 131           Say y here if your system runs firmware on any other subsystems, e.g.
 132           modem or DSP.
 133
 134 config QCOM_WCNSS_PIL
 135         tristate "Qualcomm WCNSS Peripheral Image Loader"
 136         depends on OF && ARCH_QCOM
 137         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 138         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 139         depends on QCOM_SMEM
 140         depends on QCOM_SYSMON || QCOM_SYSMON=n
 141         select QCOM_MDT_LOADER
 142         select QCOM_RPROC_COMMON
 143         select QCOM_SCM
 144         help
 145           Say y here to support the Peripheral Image Loader for the Qualcomm
 146           Wireless Connectivity Subsystem.
 147
 148 config ST_REMOTEPROC
 149         tristate "ST remoteproc support"
 150         depends on ARCH_STI
 151         select MAILBOX
 152         select STI_MBOX
 153         help
 154           Say y here to support ST's adjunct processors via the remote
 155           processor framework.
 156           This can be either built-in or a loadable module.
 157
 158 config ST_SLIM_REMOTEPROC
 159         tristate
 160
 161 endif # REMOTEPROC
 162
 163 endmenu