drivers/remoteproc/Kconfig

   1 menu "Remoteproc drivers"
   2
   3 config REMOTEPROC
   4         tristate "Support for Remote Processor subsystem"
   5         depends on HAS_DMA
   6         select CRC32
   7         select FW_LOADER
   8         select VIRTIO
   9         help
  10           Support for remote processors (such as DSP coprocessors). These
  11           are mainly used on embedded systems.
  12
  13 if REMOTEPROC
  14
  15 config IMX_REMOTEPROC
  16         tristate "IMX6/7 remoteproc support"
  17         depends on SOC_IMX6SX || SOC_IMX7D
  18         help
  19           Say y here to support iMX's remote processors (Cortex M4
  20           on iMX7D) via the remote processor framework.
  21
  22           It's safe to say N here.
  23
  24 config OMAP_REMOTEPROC
  25         tristate "OMAP remoteproc support"
  26         depends on HAS_DMA
  27         depends on ARCH_OMAP4 || SOC_OMAP5
  28         depends on OMAP_IOMMU
  29         select MAILBOX
  30         select OMAP2PLUS_MBOX
  31         help
  32           Say y here to support OMAP's remote processors (dual M3
  33           and DSP on OMAP4) via the remote processor framework.
  34
  35           Currently only supported on OMAP4.
  36
  37           Usually you want to say Y here, in order to enable multimedia
  38           use-cases to run on your platform (multimedia codecs are
  39           offloaded to remote DSP processors using this framework).
  40
  41           It's safe to say N here if you're not interested in multimedia
  42           offloading or just want a bare minimum kernel.
  43
  44 config WKUP_M3_RPROC
  45         tristate "AMx3xx Wakeup M3 remoteproc support"
  46         depends on SOC_AM33XX || SOC_AM43XX
  47         help
  48           Say y here to support Wakeup M3 remote processor on TI AM33xx
  49           and AM43xx family of SoCs.
  50
  51           Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
  52           for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
  53           firmware onto these remote processors.
  54           If unsure say N.
  55
  56 config DA8XX_REMOTEPROC
  57         tristate "DA8xx/OMAP-L13x remoteproc support"
  58         depends on ARCH_DAVINCI_DA8XX
  59         depends on DMA_CMA
  60         help
  61           Say y here to support DA8xx/OMAP-L13x remote processors via the
  62           remote processor framework.
  63
  64           You want to say y here in order to enable AMP
  65           use-cases to run on your platform (multimedia codecs are
  66           offloaded to remote DSP processors using this framework).
  67
  68           This module controls the name of the firmware file that gets
  69           loaded on the DSP.  This file must reside in the /lib/firmware
  70           directory.  It can be specified via the module parameter
  71           da8xx_fw_name=<filename>, and if not specified will default to
  72           "rproc-dsp-fw".
  73
  74           It's safe to say n here if you're not interested in multimedia
  75           offloading.
  76
  77 config KEYSTONE_REMOTEPROC
  78         tristate "Keystone Remoteproc support"
  79         depends on ARCH_KEYSTONE
  80         help
  81           Say Y here here to support Keystone remote processors (DSP)
  82           via the remote processor framework.
  83
  84           It's safe to say N here if you're not interested in the Keystone
  85           DSPs or just want to use a bare minimum kernel.
  86
  87 config QCOM_ADSP_PIL
  88         tristate "Qualcomm ADSP Peripheral Image Loader"
  89         depends on OF && ARCH_QCOM
  90         depends on QCOM_SMEM
  91         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
  92         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
  93         select MFD_SYSCON
  94         select QCOM_MDT_LOADER
  95         select QCOM_RPROC_COMMON
  96         select QCOM_SCM
  97         help
  98           Say y here to support the TrustZone based Peripherial Image Loader
  99           for the Qualcomm ADSP remote processors.
 100
 101 config QCOM_RPROC_COMMON
 102         tristate
 103
 104 config QCOM_Q6V5_PIL
 105         tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
 106         depends on OF && ARCH_QCOM
 107         depends on QCOM_SMEM
 108         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 109         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 110         select MFD_SYSCON
 111         select QCOM_RPROC_COMMON
 112         select QCOM_SCM
 113         help
 114           Say y here to support the Qualcomm Peripherial Image Loader for the
 115           Hexagon V5 based remote processors.
 116
 117 config QCOM_WCNSS_PIL
 118         tristate "Qualcomm WCNSS Peripheral Image Loader"
 119         depends on OF && ARCH_QCOM
 120         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 121         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 122         depends on QCOM_SMEM
 123         select QCOM_MDT_LOADER
 124         select QCOM_RPROC_COMMON
 125         select QCOM_SCM
 126         help
 127           Say y here to support the Peripheral Image Loader for the Qualcomm
 128           Wireless Connectivity Subsystem.
 129
 130 config ST_REMOTEPROC
 131         tristate "ST remoteproc support"
 132         depends on ARCH_STI
 133         select MAILBOX
 134         select STI_MBOX
 135         help
 136           Say y here to support ST's adjunct processors via the remote
 137           processor framework.
 138           This can be either built-in or a loadable module.
 139
 140 config ST_SLIM_REMOTEPROC
 141         tristate
 142
 143 endif # REMOTEPROC
 144
 145 endmenu