drivers/remoteproc/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 menu "Remoteproc drivers"
   3
   4 config REMOTEPROC
   5         tristate "Support for Remote Processor subsystem"
   6         depends on HAS_DMA
   7         select CRC32
   8         select FW_LOADER
   9         select VIRTIO
  10         select WANT_DEV_COREDUMP
  11         help
  12           Support for remote processors (such as DSP coprocessors). These
  13           are mainly used on embedded systems.
  14
  15 if REMOTEPROC
  16
  17 config IMX_REMOTEPROC
  18         tristate "IMX6/7 remoteproc support"
  19         depends on SOC_IMX6SX || SOC_IMX7D
  20         help
  21           Say y here to support iMX's remote processors (Cortex M4
  22           on iMX7D) via the remote processor framework.
  23
  24           It's safe to say N here.
  25
  26 config OMAP_REMOTEPROC
  27         tristate "OMAP remoteproc support"
  28         depends on ARCH_OMAP4 || SOC_OMAP5
  29         depends on OMAP_IOMMU
  30         select MAILBOX
  31         select OMAP2PLUS_MBOX
  32         help
  33           Say y here to support OMAP's remote processors (dual M3
  34           and DSP on OMAP4) via the remote processor framework.
  35
  36           Currently only supported on OMAP4.
  37
  38           Usually you want to say Y here, in order to enable multimedia
  39           use-cases to run on your platform (multimedia codecs are
  40           offloaded to remote DSP processors using this framework).
  41
  42           It's safe to say N here if you're not interested in multimedia
  43           offloading or just want a bare minimum kernel.
  44
  45 config WKUP_M3_RPROC
  46         tristate "AMx3xx Wakeup M3 remoteproc support"
  47         depends on SOC_AM33XX || SOC_AM43XX
  48         help
  49           Say y here to support Wakeup M3 remote processor on TI AM33xx
  50           and AM43xx family of SoCs.
  51
  52           Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
  53           for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
  54           firmware onto these remote processors.
  55           If unsure say N.
  56
  57 config DA8XX_REMOTEPROC
  58         tristate "DA8xx/OMAP-L13x remoteproc support"
  59         depends on ARCH_DAVINCI_DA8XX
  60         depends on DMA_CMA
  61         help
  62           Say y here to support DA8xx/OMAP-L13x remote processors via the
  63           remote processor framework.
  64
  65           You want to say y here in order to enable AMP
  66           use-cases to run on your platform (multimedia codecs are
  67           offloaded to remote DSP processors using this framework).
  68
  69           This module controls the name of the firmware file that gets
  70           loaded on the DSP.  This file must reside in the /lib/firmware
  71           directory.  It can be specified via the module parameter
  72           da8xx_fw_name=<filename>, and if not specified will default to
  73           "rproc-dsp-fw".
  74
  75           It's safe to say n here if you're not interested in multimedia
  76           offloading.
  77
  78 config KEYSTONE_REMOTEPROC
  79         tristate "Keystone Remoteproc support"
  80         depends on ARCH_KEYSTONE
  81         help
  82           Say Y here here to support Keystone remote processors (DSP)
  83           via the remote processor framework.
  84
  85           It's safe to say N here if you're not interested in the Keystone
  86           DSPs or just want to use a bare minimum kernel.
  87
  88 config QCOM_RPROC_COMMON
  89         tristate
  90
  91 config QCOM_Q6V5_COMMON
  92         tristate
  93         depends on ARCH_QCOM
  94         depends on QCOM_SMEM
  95
  96 config QCOM_Q6V5_ADSP
  97         tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
  98         depends on OF && ARCH_QCOM
  99         depends on QCOM_SMEM
 100         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 101         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 102         depends on QCOM_SYSMON || QCOM_SYSMON=n
 103         select MFD_SYSCON
 104         select QCOM_MDT_LOADER
 105         select QCOM_Q6V5_COMMON
 106         select QCOM_RPROC_COMMON
 107         help
 108           Say y here to support the Peripheral Image Loader
 109           for the Qualcomm Technology Inc. ADSP remote processors.
 110
 111 config QCOM_Q6V5_MSS
 112         tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
 113         depends on OF && ARCH_QCOM
 114         depends on QCOM_SMEM
 115         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 116         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 117         depends on QCOM_SYSMON || QCOM_SYSMON=n
 118         select MFD_SYSCON
 119         select QCOM_Q6V5_COMMON
 120         select QCOM_RPROC_COMMON
 121         select QCOM_SCM
 122         help
 123           Say y here to support the Qualcomm self-authenticating modem
 124           subsystem based on Hexagon V5.
 125
 126 config QCOM_Q6V5_PAS
 127         tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
 128         depends on OF && ARCH_QCOM
 129         depends on QCOM_SMEM
 130         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 131         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 132         depends on QCOM_SYSMON || QCOM_SYSMON=n
 133         select MFD_SYSCON
 134         select QCOM_MDT_LOADER
 135         select QCOM_Q6V5_COMMON
 136         select QCOM_RPROC_COMMON
 137         select QCOM_SCM
 138         help
 139           Say y here to support the TrustZone based Peripherial Image Loader
 140           for the Qualcomm Hexagon v5 based remote processors. This is commonly
 141           used to control subsystems such as ADSP, Compute and Sensor.
 142
 143 config QCOM_Q6V5_WCSS
 144         tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
 145         depends on OF && ARCH_QCOM
 146         depends on QCOM_SMEM
 147         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 148         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 149         depends on QCOM_SYSMON || QCOM_SYSMON=n
 150         select MFD_SYSCON
 151         select QCOM_MDT_LOADER
 152         select QCOM_Q6V5_COMMON
 153         select QCOM_RPROC_COMMON
 154         select QCOM_SCM
 155         help
 156           Say y here to support the Qualcomm Peripheral Image Loader for the
 157           Hexagon V5 based WCSS remote processors.
 158
 159 config QCOM_SYSMON
 160         tristate "Qualcomm sysmon driver"
 161         depends on RPMSG
 162         depends on ARCH_QCOM
 163         depends on NET
 164         select QCOM_QMI_HELPERS
 165         help
 166           The sysmon driver implements a sysmon QMI client and a handler for
 167           the sys_mon SMD and GLINK channel, which are used for graceful
 168           shutdown, retrieving failure information and propagating information
 169           about other subsystems being shut down.
 170
 171           Say y here if your system runs firmware on any other subsystems, e.g.
 172           modem or DSP.
 173
 174 config QCOM_WCNSS_PIL
 175         tristate "Qualcomm WCNSS Peripheral Image Loader"
 176         depends on OF && ARCH_QCOM
 177         depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
 178         depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 179         depends on QCOM_SMEM
 180         depends on QCOM_SYSMON || QCOM_SYSMON=n
 181         select QCOM_MDT_LOADER
 182         select QCOM_RPROC_COMMON
 183         select QCOM_SCM
 184         help
 185           Say y here to support the Peripheral Image Loader for the Qualcomm
 186           Wireless Connectivity Subsystem.
 187
 188 config ST_REMOTEPROC
 189         tristate "ST remoteproc support"
 190         depends on ARCH_STI
 191         select MAILBOX
 192         select STI_MBOX
 193         help
 194           Say y here to support ST's adjunct processors via the remote
 195           processor framework.
 196           This can be either built-in or a loadable module.
 197
 198 config ST_SLIM_REMOTEPROC
 199         tristate
 200
 201 endif # REMOTEPROC
 202
 203 endmenu