drivers/rtc/Kconfig

   1 #
   2 # RTC class/drivers configuration
   3 #
   4
   5 config RTC_LIB
   6         tristate
   7
   8 menuconfig RTC_CLASS
   9         tristate "Real Time Clock"
  10         default n
  11         depends on !S390
  12         select RTC_LIB
  13         help
  14           Generic RTC class support. If you say yes here, you will
  15           be allowed to plug one or more RTCs to your system. You will
  16           probably want to enable one or more of the interfaces below.
  17
  18           This driver can also be built as a module. If so, the module
  19           will be called rtc-core.
  20
  21 if RTC_CLASS
  22
  23 config RTC_HCTOSYS
  24         bool "Set system time from RTC on startup and resume"
  25         depends on RTC_CLASS = y
  26         default y
  27         help
  28           If you say yes here, the system time (wall clock) will be set using
  29           the value read from a specified RTC device. This is useful to avoid
  30           unnecessary fsck runs at boot time, and to network better.
  31
  32 config RTC_HCTOSYS_DEVICE
  33         string "RTC used to set the system time"
  34         depends on RTC_HCTOSYS = y
  35         default "rtc0"
  36         help
  37           The RTC device that will be used to (re)initialize the system
  38           clock, usually rtc0. Initialization is done when the system
  39           starts up, and when it resumes from a low power state. This
  40           device should record time in UTC, since the kernel won't do
  41           timezone correction.
  42
  43           The driver for this RTC device must be loaded before late_initcall
  44           functions run, so it must usually be statically linked.
  45
  46           This clock should be battery-backed, so that it reads the correct
  47           time when the system boots from a power-off state. Otherwise, your
  48           system will need an external clock source (like an NTP server).
  49
  50           If the clock you specify here is not battery backed, it may still
  51           be useful to reinitialize system time when resuming from system
  52           sleep states. Do not specify an RTC here unless it stays powered
  53           during all this system's supported sleep states.
  54
  55 config RTC_DEBUG
  56         bool "RTC debug support"
  57         depends on RTC_CLASS = y
  58         help
  59           Say yes here to enable debugging support in the RTC framework
  60           and individual RTC drivers.
  61
  62 comment "RTC interfaces"
  63
  64 config RTC_INTF_SYSFS
  65         boolean "/sys/class/rtc/rtcN (sysfs)"
  66         depends on SYSFS
  67         default RTC_CLASS
  68         help
  69           Say yes here if you want to use your RTCs using sysfs interfaces,
  70           /sys/class/rtc/rtc0 through /sys/.../rtcN.
  71
  72           If unsure, say Y.
  73
  74 config RTC_INTF_PROC
  75         boolean "/proc/driver/rtc (procfs for rtc0)"
  76         depends on PROC_FS
  77         default RTC_CLASS
  78         help
  79           Say yes here if you want to use your first RTC through the proc
  80           interface, /proc/driver/rtc. Other RTCs will not be available
  81           through that API.
  82
  83           If unsure, say Y.
  84
  85 config RTC_INTF_DEV
  86         boolean "/dev/rtcN (character devices)"
  87         default RTC_CLASS
  88         help
  89           Say yes here if you want to use your RTCs using the /dev
  90           interfaces, which "udev" sets up as /dev/rtc0 through
  91           /dev/rtcN.
  92
  93           You may want to set up a symbolic link so one of these
  94           can be accessed as /dev/rtc, which is a name
  95           expected by "hwclock" and some other programs. Recent
  96           versions of "udev" are known to set up the symlink for you.
  97
  98           If unsure, say Y.
  99
 100 config RTC_INTF_DEV_UIE_EMUL
 101         bool "RTC UIE emulation on dev interface"
 102         depends on RTC_INTF_DEV
 103         help
 104           Provides an emulation for RTC_UIE if the underlying rtc chip
 105           driver does not expose RTC_UIE ioctls. Those requests generate
 106           once-per-second update interrupts, used for synchronization.
 107
 108           The emulation code will read the time from the hardware
 109           clock several times per second, please enable this option
 110           only if you know that you really need it.
 111
 112 config RTC_DRV_TEST
 113         tristate "Test driver/device"
 114         help
 115           If you say yes here you get support for the
 116           RTC test driver. It's a software RTC which can be
 117           used to test the RTC subsystem APIs. It gets
 118           the time from the system clock.
 119           You want this driver only if you are doing development
 120           on the RTC subsystem. Please read the source code
 121           for further details.
 122
 123           This driver can also be built as a module. If so, the module
 124           will be called rtc-test.
 125
 126 comment "I2C RTC drivers"
 127         depends on I2C
 128
 129 if I2C
 130
 131 config RTC_DRV_DS1307
 132         tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00, EPSON RX-8025"
 133         help
 134           If you say yes here you get support for various compatible RTC
 135           chips (often with battery backup) connected with I2C. This driver
 136           should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00,
 137           EPSON RX-8025 and probably other chips. In some cases the RTC
 138           must already have been initialized (by manufacturing or a
 139           bootloader).
 140
 141           The first seven registers on these chips hold an RTC, and other
 142           registers may add features such as NVRAM, a trickle charger for
 143           the RTC/NVRAM backup power, and alarms. NVRAM is visible in
 144           sysfs, but other chip features may not be available.
 145
 146           This driver can also be built as a module. If so, the module
 147           will be called rtc-ds1307.
 148
 149 config RTC_DRV_DS1374
 150         tristate "Dallas/Maxim DS1374"
 151         depends on RTC_CLASS && I2C
 152         help
 153           If you say yes here you get support for Dallas Semiconductor
 154           DS1374 real-time clock chips. If an interrupt is associated
 155           with the device, the alarm functionality is supported.
 156
 157           This driver can also be built as a module. If so, the module
 158           will be called rtc-ds1374.
 159
 160 config RTC_DRV_DS1672
 161         tristate "Dallas/Maxim DS1672"
 162         help
 163           If you say yes here you get support for the
 164           Dallas/Maxim DS1672 timekeeping chip.
 165
 166           This driver can also be built as a module. If so, the module
 167           will be called rtc-ds1672.
 168
 169 config RTC_DRV_MAX6900
 170         tristate "Maxim MAX6900"
 171         help
 172           If you say yes here you will get support for the
 173           Maxim MAX6900 I2C RTC chip.
 174
 175           This driver can also be built as a module. If so, the module
 176           will be called rtc-max6900.
 177
 178 config RTC_DRV_RS5C372
 179         tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
 180         help
 181           If you say yes here you get support for the
 182           Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
 183
 184           This driver can also be built as a module. If so, the module
 185           will be called rtc-rs5c372.
 186
 187 config RTC_DRV_ISL1208
 188         tristate "Intersil ISL1208"
 189         help
 190           If you say yes here you get support for the
 191           Intersil ISL1208 RTC chip.
 192
 193           This driver can also be built as a module. If so, the module
 194           will be called rtc-isl1208.
 195
 196 config RTC_DRV_X1205
 197         tristate "Xicor/Intersil X1205"
 198         help
 199           If you say yes here you get support for the
 200           Xicor/Intersil X1205 RTC chip.
 201
 202           This driver can also be built as a module. If so, the module
 203           will be called rtc-x1205.
 204
 205 config RTC_DRV_PCF8563
 206         tristate "Philips PCF8563/Epson RTC8564"
 207         help
 208           If you say yes here you get support for the
 209           Philips PCF8563 RTC chip. The Epson RTC8564
 210           should work as well.
 211
 212           This driver can also be built as a module. If so, the module
 213           will be called rtc-pcf8563.
 214
 215 config RTC_DRV_PCF8583
 216         tristate "Philips PCF8583"
 217         help
 218           If you say yes here you get support for the Philips PCF8583
 219           RTC chip found on Acorn RiscPCs. This driver supports the
 220           platform specific method of retrieving the current year from
 221           the RTC's SRAM. It will work on other platforms with the same
 222           chip, but the year will probably have to be tweaked.
 223
 224           This driver can also be built as a module. If so, the module
 225           will be called rtc-pcf8583.
 226
 227 config RTC_DRV_M41T80
 228         tristate "ST M41T62/65/M41T80/81/82/83/84/85/87"
 229         help
 230           If you say Y here you will get support for the ST M41T60
 231           and M41T80 RTC chips series. Currently, the following chips are
 232           supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
 233           M41ST85, and M41ST87.
 234
 235           This driver can also be built as a module. If so, the module
 236           will be called rtc-m41t80.
 237
 238 config RTC_DRV_M41T80_WDT
 239         bool "ST M41T65/M41T80 series RTC watchdog timer"
 240         depends on RTC_DRV_M41T80
 241         help
 242           If you say Y here you will get support for the
 243           watchdog timer in the ST M41T60 and M41T80 RTC chips series.
 244
 245 config RTC_DRV_DM355EVM
 246         tristate "TI DaVinci DM355 EVM RTC"
 247         depends on MFD_DM355EVM_MSP
 248         help
 249           Supports the RTC firmware in the MSP430 on the DM355 EVM.
 250
 251 config RTC_DRV_TWL92330
 252         boolean "TI TWL92330/Menelaus"
 253         depends on MENELAUS
 254         help
 255           If you say yes here you get support for the RTC on the
 256           TWL92330 "Menelaus" power management chip, used with OMAP2
 257           platforms. The support is integrated with the rest of
 258           the Menelaus driver; it's not separate module.
 259
 260 config RTC_DRV_TWL4030
 261         tristate "TI TWL4030/TWL5030/TPS659x0"
 262         depends on RTC_CLASS && TWL4030_CORE
 263         help
 264           If you say yes here you get support for the RTC on the
 265           TWL4030 family chips, used mostly with OMAP3 platforms.
 266
 267           This driver can also be built as a module. If so, the module
 268           will be called rtc-twl4030.
 269
 270 config RTC_DRV_S35390A
 271         tristate "Seiko Instruments S-35390A"
 272         select BITREVERSE
 273         help
 274           If you say yes here you will get support for the Seiko
 275           Instruments S-35390A.
 276
 277           This driver can also be built as a module. If so the module
 278           will be called rtc-s35390a.
 279
 280 config RTC_DRV_FM3130
 281         tristate "Ramtron FM3130"
 282         help
 283           If you say Y here you will get support for the
 284           Ramtron FM3130 RTC chips.
 285           Ramtron FM3130 is a chip with two separate devices inside,
 286           RTC clock and FRAM. This driver provides only RTC functionality.
 287
 288           This driver can also be built as a module. If so the module
 289           will be called rtc-fm3130.
 290
 291 config RTC_DRV_RX8581
 292         tristate "Epson RX-8581"
 293         help
 294           If you say yes here you will get support for the Epson RX-8581.
 295
 296           This driver can also be built as a module. If so the module
 297           will be called rtc-rx8581.
 298
 299 config RTC_DRV_RX8025
 300         tristate "Epson RX-8025SA/NB"
 301         help
 302           If you say yes here you get support for the Epson
 303           RX-8025SA/NB RTC chips.
 304
 305           This driver can also be built as a module. If so, the module
 306           will be called rtc-rx8025.
 307
 308 endif # I2C
 309
 310 comment "SPI RTC drivers"
 311
 312 if SPI_MASTER
 313
 314 config RTC_DRV_M41T94
 315         tristate "ST M41T94"
 316         help
 317           If you say yes here you will get support for the
 318           ST M41T94 SPI RTC chip.
 319
 320           This driver can also be built as a module. If so, the module
 321           will be called rtc-m41t94.
 322
 323 config RTC_DRV_DS1305
 324         tristate "Dallas/Maxim DS1305/DS1306"
 325         help
 326           Select this driver to get support for the Dallas/Maxim DS1305
 327           and DS1306 real time clock chips. These support a trickle
 328           charger, alarms, and NVRAM in addition to the clock.
 329
 330           This driver can also be built as a module. If so, the module
 331           will be called rtc-ds1305.
 332
 333 config RTC_DRV_DS1390
 334         tristate "Dallas/Maxim DS1390/93/94"
 335         help
 336           If you say yes here you get support for the
 337           Dallas/Maxim DS1390/93/94 chips.
 338
 339           This driver only supports the RTC feature, and not other chip
 340           features such as alarms and trickle charging.
 341
 342           This driver can also be built as a module. If so, the module
 343           will be called rtc-ds1390.
 344
 345 config RTC_DRV_MAX6902
 346         tristate "Maxim MAX6902"
 347         help
 348           If you say yes here you will get support for the
 349           Maxim MAX6902 SPI RTC chip.
 350
 351           This driver can also be built as a module. If so, the module
 352           will be called rtc-max6902.
 353
 354 config RTC_DRV_R9701
 355         tristate "Epson RTC-9701JE"
 356         help
 357           If you say yes here you will get support for the
 358           Epson RTC-9701JE SPI RTC chip.
 359
 360           This driver can also be built as a module. If so, the module
 361           will be called rtc-r9701.
 362
 363 config RTC_DRV_RS5C348
 364         tristate "Ricoh RS5C348A/B"
 365         help
 366           If you say yes here you get support for the
 367           Ricoh RS5C348A and RS5C348B RTC chips.
 368
 369           This driver can also be built as a module. If so, the module
 370           will be called rtc-rs5c348.
 371
 372 config RTC_DRV_DS3234
 373         tristate "Maxim/Dallas DS3234"
 374         help
 375           If you say yes here you get support for the
 376           Maxim/Dallas DS3234 SPI RTC chip.
 377
 378           This driver can also be built as a module. If so, the module
 379           will be called rtc-ds3234.
 380
 381 config RTC_DRV_PCF2123
 382         tristate "NXP PCF2123"
 383         help
 384           If you say yes here you get support for the NXP PCF2123
 385           RTC chip.
 386
 387           This driver can also be built as a module. If so, the module
 388           will be called rtc-pcf2123.
 389
 390 endif # SPI_MASTER
 391
 392 comment "Platform RTC drivers"
 393
 394 # this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h>
 395 # requires <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
 396 # global rtc_lock ... it's not yet just another platform_device.
 397
 398 config RTC_DRV_CMOS
 399         tristate "PC-style 'CMOS'"
 400         depends on X86 || ALPHA || ARM || M32R || ATARI || PPC || MIPS || SPARC64
 401         default y if X86
 402         help
 403           Say "yes" here to get direct support for the real time clock
 404           found in every PC or ACPI-based system, and some other boards.
 405           Specifically the original MC146818, compatibles like those in
 406           PC south bridges, the DS12887 or M48T86, some multifunction
 407           or LPC bus chips, and so on.
 408
 409           Your system will need to define the platform device used by
 410           this driver, otherwise it won't be accessible. This means
 411           you can safely enable this driver if you don't know whether
 412           or not your board has this kind of hardware.
 413
 414           This driver can also be built as a module. If so, the module
 415           will be called rtc-cmos.
 416
 417 config RTC_DRV_DS1216
 418         tristate "Dallas DS1216"
 419         depends on SNI_RM
 420         help
 421           If you say yes here you get support for the Dallas DS1216 RTC chips.
 422
 423 config RTC_DRV_DS1286
 424         tristate "Dallas DS1286"
 425         help
 426           If you say yes here you get support for the Dallas DS1286 RTC chips.
 427
 428 config RTC_DRV_DS1302
 429         tristate "Dallas DS1302"
 430         depends on SH_SECUREEDGE5410
 431         help
 432           If you say yes here you get support for the Dallas DS1302 RTC chips.
 433
 434 config RTC_DRV_DS1511
 435         tristate "Dallas DS1511"
 436         depends on RTC_CLASS
 437         help
 438           If you say yes here you get support for the
 439           Dallas DS1511 timekeeping/watchdog chip.
 440
 441           This driver can also be built as a module. If so, the module
 442           will be called rtc-ds1511.
 443
 444 config RTC_DRV_DS1553
 445         tristate "Maxim/Dallas DS1553"
 446         help
 447           If you say yes here you get support for the
 448           Maxim/Dallas DS1553 timekeeping chip.
 449
 450           This driver can also be built as a module. If so, the module
 451           will be called rtc-ds1553.
 452
 453 config RTC_DRV_DS1742
 454         tristate "Maxim/Dallas DS1742/1743"
 455         help
 456           If you say yes here you get support for the
 457           Maxim/Dallas DS1742/1743 timekeeping chip.
 458
 459           This driver can also be built as a module. If so, the module
 460           will be called rtc-ds1742.
 461
 462 config RTC_DRV_EFI
 463         tristate "EFI RTC"
 464         depends on IA64
 465         help
 466           If you say yes here you will get support for the EFI
 467           Real Time Clock.
 468
 469           This driver can also be built as a module. If so, the module
 470           will be called rtc-efi.
 471
 472 config RTC_DRV_STK17TA8
 473         tristate "Simtek STK17TA8"
 474         depends on RTC_CLASS
 475         help
 476           If you say yes here you get support for the
 477           Simtek STK17TA8 timekeeping chip.
 478
 479           This driver can also be built as a module. If so, the module
 480           will be called rtc-stk17ta8.
 481
 482 config RTC_DRV_M48T86
 483         tristate "ST M48T86/Dallas DS12887"
 484         help
 485           If you say Y here you will get support for the
 486           ST M48T86 and Dallas DS12887 RTC chips.
 487
 488           This driver can also be built as a module. If so, the module
 489           will be called rtc-m48t86.
 490
 491 config RTC_DRV_M48T35
 492         tristate "ST M48T35"
 493         help
 494           If you say Y here you will get support for the
 495           ST M48T35 RTC chip.
 496
 497           This driver can also be built as a module, if so, the module
 498           will be called "rtc-m48t35".
 499
 500 config RTC_DRV_M48T59
 501         tristate "ST M48T59/M48T08/M48T02"
 502         help
 503           If you say Y here you will get support for the
 504           ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
 505
 506           These chips are usually found in Sun SPARC and UltraSPARC
 507           workstations.
 508
 509           This driver can also be built as a module, if so, the module
 510           will be called "rtc-m48t59".
 511
 512 config RTC_DRV_MSM6242
 513         tristate "Oki MSM6242"
 514         help
 515           If you say yes here you get support for the Oki MSM6242
 516           timekeeping chip. It is used in some Amiga models (e.g. A2000).
 517
 518           This driver can also be built as a module. If so, the module
 519           will be called rtc-msm6242.
 520
 521 config RTC_MXC
 522         tristate "Freescale MXC Real Time Clock"
 523         depends on ARCH_MXC
 524         depends on RTC_CLASS
 525         help
 526            If you say yes here you get support for the Freescale MXC
 527            RTC module.
 528
 529            This driver can also be built as a module, if so, the module
 530            will be called "rtc-mxc".
 531
 532 config RTC_DRV_BQ4802
 533         tristate "TI BQ4802"
 534         help
 535           If you say Y here you will get support for the TI
 536           BQ4802 RTC chip.
 537
 538           This driver can also be built as a module. If so, the module
 539           will be called rtc-bq4802.
 540
 541 config RTC_DRV_RP5C01
 542         tristate "Ricoh RP5C01"
 543         help
 544           If you say yes here you get support for the Ricoh RP5C01
 545           timekeeping chip. It is used in some Amiga models (e.g. A3000
 546           and A4000).
 547
 548           This driver can also be built as a module. If so, the module
 549           will be called rtc-rp5c01.
 550
 551 config RTC_DRV_V3020
 552         tristate "EM Microelectronic V3020"
 553         help
 554           If you say yes here you will get support for the
 555           EM Microelectronic v3020 RTC chip.
 556
 557           This driver can also be built as a module. If so, the module
 558           will be called rtc-v3020.
 559
 560 config RTC_DRV_WM831X
 561         tristate "Wolfson Microelectronics WM831x RTC"
 562         depends on MFD_WM831X
 563         help
 564           If you say yes here you will get support for the RTC subsystem
 565           of the Wolfson Microelectronics WM831X series PMICs.
 566
 567           This driver can also be built as a module. If so, the module
 568           will be called "rtc-wm831x".
 569
 570 config RTC_DRV_WM8350
 571         tristate "Wolfson Microelectronics WM8350 RTC"
 572         depends on MFD_WM8350
 573         help
 574           If you say yes here you will get support for the RTC subsystem
 575           of the Wolfson Microelectronics WM8350.
 576
 577           This driver can also be built as a module. If so, the module
 578           will be called "rtc-wm8350".
 579
 580 config RTC_DRV_PCF50633
 581         depends on MFD_PCF50633
 582         tristate "NXP PCF50633 RTC"
 583         help
 584           If you say yes here you get support for the RTC subsystem of the
 585           NXP PCF50633 used in embedded systems.
 586
 587 config RTC_DRV_AB3100
 588         tristate "ST-Ericsson AB3100 RTC"
 589         depends on AB3100_CORE
 590         default y if AB3100_CORE
 591         help
 592           Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
 593           support. This chip contains a battery- and capacitor-backed RTC.
 594
 595
 596 comment "on-CPU RTC drivers"
 597
 598 config RTC_DRV_OMAP
 599         tristate "TI OMAP1"
 600         depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730
 601         help
 602           Say "yes" here to support the real time clock on TI OMAP1 chips.
 603           This driver can also be built as a module called rtc-omap.
 604
 605 config RTC_DRV_S3C
 606         tristate "Samsung S3C series SoC RTC"
 607         depends on ARCH_S3C2410
 608         help
 609           RTC (Realtime Clock) driver for the clock inbuilt into the
 610           Samsung S3C24XX series of SoCs. This can provide periodic
 611           interrupt rates from 1Hz to 64Hz for user programs, and
 612           wakeup from Alarm.
 613
 614           The driver currently supports the common features on all the
 615           S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
 616           and S3C2442.
 617
 618           This driver can also be build as a module. If so, the module
 619           will be called rtc-s3c.
 620
 621 config RTC_DRV_EP93XX
 622         tristate "Cirrus Logic EP93XX"
 623         depends on ARCH_EP93XX
 624         help
 625           If you say yes here you get support for the
 626           RTC embedded in the Cirrus Logic EP93XX processors.
 627
 628           This driver can also be built as a module. If so, the module
 629           will be called rtc-ep93xx.
 630
 631 config RTC_DRV_SA1100
 632         tristate "SA11x0/PXA2xx"
 633         depends on ARCH_SA1100 || ARCH_PXA
 634         help
 635           If you say Y here you will get access to the real time clock
 636           built into your SA11x0 or PXA2xx CPU.
 637
 638           To compile this driver as a module, choose M here: the
 639           module will be called rtc-sa1100.
 640
 641 config RTC_DRV_SH
 642         tristate "SuperH On-Chip RTC"
 643         depends on RTC_CLASS && SUPERH && HAVE_CLK
 644         help
 645           Say Y here to enable support for the on-chip RTC found in
 646           most SuperH processors.
 647
 648           To compile this driver as a module, choose M here: the
 649           module will be called rtc-sh.
 650
 651 config RTC_DRV_VR41XX
 652         tristate "NEC VR41XX"
 653         depends on CPU_VR41XX
 654         help
 655           If you say Y here you will get access to the real time clock
 656           built into your NEC VR41XX CPU.
 657
 658           To compile this driver as a module, choose M here: the
 659           module will be called rtc-vr41xx.
 660
 661 config RTC_DRV_PL030
 662         tristate "ARM AMBA PL030 RTC"
 663         depends on ARM_AMBA
 664         help
 665           If you say Y here you will get access to ARM AMBA
 666           PrimeCell PL030 RTC found on certain ARM SOCs.
 667
 668           To compile this driver as a module, choose M here: the
 669           module will be called rtc-pl030.
 670
 671 config RTC_DRV_PL031
 672         tristate "ARM AMBA PL031 RTC"
 673         depends on ARM_AMBA
 674         help
 675           If you say Y here you will get access to ARM AMBA
 676           PrimeCell PL031 RTC found on certain ARM SOCs.
 677
 678           To compile this driver as a module, choose M here: the
 679           module will be called rtc-pl031.
 680
 681 config RTC_DRV_AT32AP700X
 682         tristate "AT32AP700X series RTC"
 683         depends on PLATFORM_AT32AP
 684         help
 685           Driver for the internal RTC (Realtime Clock) on Atmel AVR32
 686           AT32AP700x family processors.
 687
 688 config RTC_DRV_AT91RM9200
 689         tristate "AT91RM9200 or AT91SAM9RL"
 690         depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL
 691         help
 692           Driver for the internal RTC (Realtime Clock) module found on
 693           Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
 694           this is powered by the backup power supply.
 695
 696 config RTC_DRV_AT91SAM9
 697         tristate "AT91SAM9x/AT91CAP9"
 698         depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
 699         help
 700           RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
 701           (Real Time Timer). These timers are powered by the backup power
 702           supply (such as a small coin cell battery), but do not need to
 703           be used as RTCs.
 704
 705           (On AT91SAM9rl chips you probably want to use the dedicated RTC
 706           module and leave the RTT available for other uses.)
 707
 708 config RTC_DRV_AT91SAM9_RTT
 709         int
 710         range 0 1
 711         default 0
 712         prompt "RTT module Number" if ARCH_AT91SAM9263
 713         depends on RTC_DRV_AT91SAM9
 714         help
 715           More than one RTT module is available. You can choose which
 716           one will be used as an RTC. The default of zero is normally
 717           OK to use, though some systems use that for non-RTC purposes.
 718
 719 config RTC_DRV_AT91SAM9_GPBR
 720         int
 721         range 0 3 if !ARCH_AT91SAM9263
 722         range 0 15 if ARCH_AT91SAM9263
 723         default 0
 724         prompt "Backup Register Number"
 725         depends on RTC_DRV_AT91SAM9
 726         help
 727           The RTC driver needs to use one of the General Purpose Backup
 728           Registers (GPBRs) as well as the RTT. You can choose which one
 729           will be used. The default of zero is normally OK to use, but
 730           on some systems other software needs to use that register.
 731
 732 config RTC_DRV_AU1XXX
 733         tristate "Au1xxx Counter0 RTC support"
 734         depends on SOC_AU1X00
 735         help
 736           This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
 737           counter) to be used as a RTC.
 738
 739           This driver can also be built as a module. If so, the module
 740           will be called rtc-au1xxx.
 741
 742 config RTC_DRV_BFIN
 743         tristate "Blackfin On-Chip RTC"
 744         depends on BLACKFIN && !BF561
 745         help
 746           If you say yes here you will get support for the
 747           Blackfin On-Chip Real Time Clock.
 748
 749           This driver can also be built as a module. If so, the module
 750           will be called rtc-bfin.
 751
 752 config RTC_DRV_RS5C313
 753         tristate "Ricoh RS5C313"
 754         depends on SH_LANDISK
 755         help
 756           If you say yes here you get support for the Ricoh RS5C313 RTC chips.
 757
 758 config RTC_DRV_GENERIC
 759         tristate "Generic RTC support"
 760         # Please consider writing a new RTC driver instead of using the generic
 761         # RTC abstraction
 762         depends on PARISC || M68K || PPC || SUPERH32
 763         help
 764           Say Y or M here to enable RTC support on systems using the generic
 765           RTC abstraction. If you do not know what you are doing, you should
 766           just say Y.
 767
 768 config RTC_DRV_PXA
 769        tristate "PXA27x/PXA3xx"
 770        depends on ARCH_PXA
 771        help
 772          If you say Y here you will get access to the real time clock
 773          built into your PXA27x or PXA3xx CPU.
 774
 775          This RTC driver uses PXA RTC registers available since pxa27x
 776          series (RDxR, RYxR) instead of legacy RCNR, RTAR.
 777
 778
 779 config RTC_DRV_SUN4V
 780         bool "SUN4V Hypervisor RTC"
 781         depends on SPARC64
 782         help
 783           If you say Y here you will get support for the Hypervisor
 784           based RTC on SUN4V systems.
 785
 786 config RTC_DRV_STARFIRE
 787         bool "Starfire RTC"
 788         depends on SPARC64
 789         help
 790           If you say Y here you will get support for the RTC found on
 791           Starfire systems.
 792
 793 config RTC_DRV_TX4939
 794         tristate "TX4939 SoC"
 795         depends on SOC_TX4939
 796         help
 797           Driver for the internal RTC (Realtime Clock) module found on
 798           Toshiba TX4939 SoC.
 799
 800 config RTC_DRV_MV
 801         tristate "Marvell SoC RTC"
 802         depends on ARCH_KIRKWOOD
 803         help
 804           If you say yes here you will get support for the in-chip RTC
 805           that can be found in some of Marvell's SoC devices, such as
 806           the Kirkwood 88F6281 and 88F6192.
 807
 808           This driver can also be built as a module. If so, the module
 809           will be called rtc-mv.
 810
 811 config RTC_DRV_PS3
 812         tristate "PS3 RTC"
 813         depends on PPC_PS3
 814         help
 815           If you say yes here you will get support for the RTC on PS3.
 816
 817           This driver can also be built as a module. If so, the module
 818           will be called rtc-ps3.
 819
 820 config RTC_DRV_COH901331
 821         tristate "ST-Ericsson COH 901 331 RTC"
 822         depends on ARCH_U300
 823         help
 824           If you say Y here you will get access to ST-Ericsson
 825           COH 901 331 RTC clock found in some ST-Ericsson Mobile
 826           Platforms.
 827
 828           This driver can also be built as a module. If so, the module
 829           will be called "rtc-coh901331".
 830
 831
 832 config RTC_DRV_STMP
 833         tristate "Freescale STMP3xxx RTC"
 834         depends on ARCH_STMP3XXX
 835         help
 836           If you say yes here you will get support for the onboard
 837           STMP3xxx RTC.
 838
 839           This driver can also be built as a module. If so, the module
 840           will be called rtc-stmp3xxx.
 841
 842 config RTC_DRV_PCAP
 843         tristate "PCAP RTC"
 844         depends on EZX_PCAP
 845         help
 846           If you say Y here you will get support for the RTC found on
 847           the PCAP2 ASIC used on some Motorola phones.
 848
 849 endif # RTC_CLASS