drivers/rtc/rtc-rv3028.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * RTC driver for the Micro Crystal RV3028
   4  *
   5  * Copyright (C) 2019 Micro Crystal SA
   6  *
   7  * Alexandre Belloni <alexandre.belloni@bootlin.com>
   8  *
   9  */
  10
  11 #include <linux/clk-provider.h>
  12 #include <linux/bcd.h>
  13 #include <linux/bitops.h>
  14 #include <linux/i2c.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/kernel.h>
  17 #include <linux/log2.h>
  18 #include <linux/module.h>
  19 #include <linux/of_device.h>
  20 #include <linux/regmap.h>
  21 #include <linux/rtc.h>
  22
  23 #define RV3028_SEC                      0x00
  24 #define RV3028_MIN                      0x01
  25 #define RV3028_HOUR                     0x02
  26 #define RV3028_WDAY                     0x03
  27 #define RV3028_DAY                      0x04
  28 #define RV3028_MONTH                    0x05
  29 #define RV3028_YEAR                     0x06
  30 #define RV3028_ALARM_MIN                0x07
  31 #define RV3028_ALARM_HOUR               0x08
  32 #define RV3028_ALARM_DAY                0x09
  33 #define RV3028_STATUS                   0x0E
  34 #define RV3028_CTRL1                    0x0F
  35 #define RV3028_CTRL2                    0x10
  36 #define RV3028_EVT_CTRL                 0x13
  37 #define RV3028_TS_COUNT                 0x14
  38 #define RV3028_TS_SEC                   0x15
  39 #define RV3028_RAM1                     0x1F
  40 #define RV3028_EEPROM_ADDR              0x25
  41 #define RV3028_EEPROM_DATA              0x26
  42 #define RV3028_EEPROM_CMD               0x27
  43 #define RV3028_CLKOUT                   0x35
  44 #define RV3028_OFFSET                   0x36
  45 #define RV3028_BACKUP                   0x37
  46
  47 #define RV3028_STATUS_PORF              BIT(0)
  48 #define RV3028_STATUS_EVF               BIT(1)
  49 #define RV3028_STATUS_AF                BIT(2)
  50 #define RV3028_STATUS_TF                BIT(3)
  51 #define RV3028_STATUS_UF                BIT(4)
  52 #define RV3028_STATUS_BSF               BIT(5)
  53 #define RV3028_STATUS_CLKF              BIT(6)
  54 #define RV3028_STATUS_EEBUSY            BIT(7)
  55
  56 #define RV3028_CLKOUT_FD_MASK           GENMASK(2, 0)
  57 #define RV3028_CLKOUT_PORIE             BIT(3)
  58 #define RV3028_CLKOUT_CLKSY             BIT(6)
  59 #define RV3028_CLKOUT_CLKOE             BIT(7)
  60
  61 #define RV3028_CTRL1_EERD               BIT(3)
  62 #define RV3028_CTRL1_WADA               BIT(5)
  63
  64 #define RV3028_CTRL2_RESET              BIT(0)
  65 #define RV3028_CTRL2_12_24              BIT(1)
  66 #define RV3028_CTRL2_EIE                BIT(2)
  67 #define RV3028_CTRL2_AIE                BIT(3)
  68 #define RV3028_CTRL2_TIE                BIT(4)
  69 #define RV3028_CTRL2_UIE                BIT(5)
  70 #define RV3028_CTRL2_TSE                BIT(7)
  71
  72 #define RV3028_EVT_CTRL_TSR             BIT(2)
  73
  74 #define RV3028_EEPROM_CMD_WRITE         0x21
  75 #define RV3028_EEPROM_CMD_READ          0x22
  76
  77 #define RV3028_EEBUSY_POLL              10000
  78 #define RV3028_EEBUSY_TIMEOUT           100000
  79
  80 #define RV3028_BACKUP_TCE               BIT(5)
  81 #define RV3028_BACKUP_TCR_MASK          GENMASK(1,0)
  82
  83 #define OFFSET_STEP_PPT                 953674
  84
  85 enum rv3028_type {
  86         rv_3028,
  87 };
  88
  89 struct rv3028_data {
  90         struct regmap *regmap;
  91         struct rtc_device *rtc;
  92         enum rv3028_type type;
  93 #ifdef CONFIG_COMMON_CLK
  94         struct clk_hw clkout_hw;
  95 #endif
  96 };
  97
  98 static u16 rv3028_trickle_resistors[] = {1000, 3000, 6000, 11000};
  99
 100 static ssize_t timestamp0_store(struct device *dev,
 101                                 struct device_attribute *attr,
 102                                 const char *buf, size_t count)
 103 {
 104         struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
 105
 106         regmap_update_bits(rv3028->regmap, RV3028_EVT_CTRL, RV3028_EVT_CTRL_TSR,
 107                            RV3028_EVT_CTRL_TSR);
 108
 109         return count;
 110 };
 111
 112 static ssize_t timestamp0_show(struct device *dev,
 113                                struct device_attribute *attr, char *buf)
 114 {
 115         struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
 116         struct rtc_time tm;
 117         int ret, count;
 118         u8 date[6];
 119
 120         ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
 121         if (ret)
 122                 return ret;
 123
 124         if (!count)
 125                 return 0;
 126
 127         ret = regmap_bulk_read(rv3028->regmap, RV3028_TS_SEC, date,
 128                                sizeof(date));
 129         if (ret)
 130                 return ret;
 131
 132         tm.tm_sec = bcd2bin(date[0]);
 133         tm.tm_min = bcd2bin(date[1]);
 134         tm.tm_hour = bcd2bin(date[2]);
 135         tm.tm_mday = bcd2bin(date[3]);
 136         tm.tm_mon = bcd2bin(date[4]) - 1;
 137         tm.tm_year = bcd2bin(date[5]) + 100;
 138
 139         ret = rtc_valid_tm(&tm);
 140         if (ret)
 141                 return ret;
 142
 143         return sprintf(buf, "%llu\n",
 144                        (unsigned long long)rtc_tm_to_time64(&tm));
 145 };
 146
 147 static DEVICE_ATTR_RW(timestamp0);
 148
 149 static ssize_t timestamp0_count_show(struct device *dev,
 150                                      struct device_attribute *attr, char *buf)
 151 {
 152         struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
 153         int ret, count;
 154
 155         ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
 156         if (ret)
 157                 return ret;
 158
 159         return sprintf(buf, "%u\n", count);
 160 };
 161
 162 static DEVICE_ATTR_RO(timestamp0_count);
 163
 164 static struct attribute *rv3028_attrs[] = {
 165         &dev_attr_timestamp0.attr,
 166         &dev_attr_timestamp0_count.attr,
 167         NULL
 168 };
 169
 170 static const struct attribute_group rv3028_attr_group = {
 171         .attrs  = rv3028_attrs,
 172 };
 173
 174 static irqreturn_t rv3028_handle_irq(int irq, void *dev_id)
 175 {
 176         struct rv3028_data *rv3028 = dev_id;
 177         unsigned long events = 0;
 178         u32 status = 0, ctrl = 0;
 179
 180         if (regmap_read(rv3028->regmap, RV3028_STATUS, &status) < 0 ||
 181            status == 0) {
 182                 return IRQ_NONE;
 183         }
 184
 185         if (status & RV3028_STATUS_PORF)
 186                 dev_warn(&rv3028->rtc->dev, "Voltage low, data loss detected.\n");
 187
 188         if (status & RV3028_STATUS_TF) {
 189                 status |= RV3028_STATUS_TF;
 190                 ctrl |= RV3028_CTRL2_TIE;
 191                 events |= RTC_PF;
 192         }
 193
 194         if (status & RV3028_STATUS_AF) {
 195                 status |= RV3028_STATUS_AF;
 196                 ctrl |= RV3028_CTRL2_AIE;
 197                 events |= RTC_AF;
 198         }
 199
 200         if (status & RV3028_STATUS_UF) {
 201                 status |= RV3028_STATUS_UF;
 202                 ctrl |= RV3028_CTRL2_UIE;
 203                 events |= RTC_UF;
 204         }
 205
 206         if (events) {
 207                 rtc_update_irq(rv3028->rtc, 1, events);
 208                 regmap_update_bits(rv3028->regmap, RV3028_STATUS, status, 0);
 209                 regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ctrl, 0);
 210         }
 211
 212         if (status & RV3028_STATUS_EVF) {
 213                 sysfs_notify(&rv3028->rtc->dev.kobj, NULL,
 214                              dev_attr_timestamp0.attr.name);
 215                 dev_warn(&rv3028->rtc->dev, "event detected");
 216         }
 217
 218         return IRQ_HANDLED;
 219 }
 220
 221 static int rv3028_get_time(struct device *dev, struct rtc_time *tm)
 222 {
 223         struct rv3028_data *rv3028 = dev_get_drvdata(dev);
 224         u8 date[7];
 225         int ret, status;
 226
 227         ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
 228         if (ret < 0)
 229                 return ret;
 230
 231         if (status & RV3028_STATUS_PORF) {
 232                 dev_warn(dev, "Voltage low, data is invalid.\n");
 233                 return -EINVAL;
 234         }
 235
 236         ret = regmap_bulk_read(rv3028->regmap, RV3028_SEC, date, sizeof(date));
 237         if (ret)
 238                 return ret;
 239
 240         tm->tm_sec  = bcd2bin(date[RV3028_SEC] & 0x7f);
 241         tm->tm_min  = bcd2bin(date[RV3028_MIN] & 0x7f);
 242         tm->tm_hour = bcd2bin(date[RV3028_HOUR] & 0x3f);
 243         tm->tm_wday = ilog2(date[RV3028_WDAY] & 0x7f);
 244         tm->tm_mday = bcd2bin(date[RV3028_DAY] & 0x3f);
 245         tm->tm_mon  = bcd2bin(date[RV3028_MONTH] & 0x1f) - 1;
 246         tm->tm_year = bcd2bin(date[RV3028_YEAR]) + 100;
 247
 248         return 0;
 249 }
 250
 251 static int rv3028_set_time(struct device *dev, struct rtc_time *tm)
 252 {
 253         struct rv3028_data *rv3028 = dev_get_drvdata(dev);
 254         u8 date[7];
 255         int ret;
 256
 257         date[RV3028_SEC]   = bin2bcd(tm->tm_sec);
 258         date[RV3028_MIN]   = bin2bcd(tm->tm_min);
 259         date[RV3028_HOUR]  = bin2bcd(tm->tm_hour);
 260         date[RV3028_WDAY]  = 1 << (tm->tm_wday);
 261         date[RV3028_DAY]   = bin2bcd(tm->tm_mday);
 262         date[RV3028_MONTH] = bin2bcd(tm->tm_mon + 1);
 263         date[RV3028_YEAR]  = bin2bcd(tm->tm_year - 100);
 264
 265         /*
 266          * Writing to the Seconds register has the same effect as setting RESET
 267          * bit to 1
 268          */
 269         ret = regmap_bulk_write(rv3028->regmap, RV3028_SEC, date,
 270                                 sizeof(date));
 271         if (ret)
 272                 return ret;
 273
 274         ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
 275                                  RV3028_STATUS_PORF, 0);
 276
 277         return ret;
 278 }
 279
 280 static int rv3028_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 281 {
 282         struct rv3028_data *rv3028 = dev_get_drvdata(dev);
 283         u8 alarmvals[3];
 284         int status, ctrl, ret;
 285
 286         ret = regmap_bulk_read(rv3028->regmap, RV3028_ALARM_MIN, alarmvals,
 287                                sizeof(alarmvals));
 288         if (ret)
 289                 return ret;
 290
 291         ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
 292         if (ret < 0)
 293                 return ret;
 294
 295         ret = regmap_read(rv3028->regmap, RV3028_CTRL2, &ctrl);
 296         if (ret < 0)
 297                 return ret;
 298
 299         alrm->time.tm_sec  = 0;
 300         alrm->time.tm_min  = bcd2bin(alarmvals[0] & 0x7f);
 301         alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
 302         alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
 303
 304         alrm->enabled = !!(ctrl & RV3028_CTRL2_AIE);
 305         alrm->pending = (status & RV3028_STATUS_AF) && alrm->enabled;
 306
 307         return 0;
 308 }
 309
 310 static int rv3028_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 311 {
 312         struct rv3028_data *rv3028 = dev_get_drvdata(dev);
 313         u8 alarmvals[3];
 314         u8 ctrl = 0;
 315         int ret;
 316
 317         /* The alarm has no seconds, round up to nearest minute */
 318         if (alrm->time.tm_sec) {
 319                 time64_t alarm_time = rtc_tm_to_time64(&alrm->time);
 320
 321                 alarm_time += 60 - alrm->time.tm_sec;
 322                 rtc_time64_to_tm(alarm_time, &alrm->time);
 323         }
 324
 325         ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
 326                                  RV3028_CTRL2_AIE | RV3028_CTRL2_UIE, 0);
 327         if (ret)
 328                 return ret;
 329
 330         alarmvals[0] = bin2bcd(alrm->time.tm_min);
 331         alarmvals[1] = bin2bcd(alrm->time.tm_hour);
 332         alarmvals[2] = bin2bcd(alrm->time.tm_mday);
 333
 334         ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
 335                                  RV3028_STATUS_AF, 0);
 336         if (ret)
 337                 return ret;
 338
 339         ret = regmap_bulk_write(rv3028->regmap, RV3028_ALARM_MIN, alarmvals,
 340                                 sizeof(alarmvals));
 341         if (ret)
 342                 return ret;
 343
 344         if (alrm->enabled) {
 345                 if (rv3028->rtc->uie_rtctimer.enabled)
 346                         ctrl |= RV3028_CTRL2_UIE;
 347                 if (rv3028->rtc->aie_timer.enabled)
 348                         ctrl |= RV3028_CTRL2_AIE;
 349         }
 350
 351         ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
 352                                  RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl);
 353
 354         return ret;
 355 }
 356
 357 static int rv3028_alarm_irq_enable(struct device *dev, unsigned int enabled)
 358 {
 359         struct rv3028_data *rv3028 = dev_get_drvdata(dev);
 360         int ctrl = 0, ret;
 361
 362         if (enabled) {
 363                 if (rv3028->rtc->uie_rtctimer.enabled)
 364                         ctrl |= RV3028_CTRL2_UIE;
 365                 if (rv3028->rtc->aie_timer.enabled)
 366                         ctrl |= RV3028_CTRL2_AIE;
 367         }
 368
 369         ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
 370                                  RV3028_STATUS_AF | RV3028_STATUS_UF, 0);
 371         if (ret)
 372                 return ret;
 373
 374         ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
 375                                  RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl);
 376         if (ret)
 377                 return ret;
 378
 379         return 0;
 380 }
 381
 382 static int rv3028_read_offset(struct device *dev, long *offset)
 383 {
 384         struct rv3028_data *rv3028 = dev_get_drvdata(dev);
 385         int ret, value, steps;
 386
 387         ret = regmap_read(rv3028->regmap, RV3028_OFFSET, &value);
 388         if (ret < 0)
 389                 return ret;
 390
 391         steps = sign_extend32(value << 1, 8);
 392
 393         ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value);
 394         if (ret < 0)
 395                 return ret;
 396
 397         steps += value >> 7;
 398
 399         *offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000);
 400
 401         return 0;
 402 }
 403
 404 static int rv3028_set_offset(struct device *dev, long offset)
 405 {
 406         struct rv3028_data *rv3028 = dev_get_drvdata(dev);
 407         int ret;
 408
 409         offset = clamp(offset, -244141L, 243187L) * 1000;
 410         offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
 411
 412         ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1);
 413         if (ret < 0)
 414                 return ret;
 415
 416         return regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
 417                                   offset << 7);
 418 }
 419
 420 static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 421 {
 422         struct rv3028_data *rv3028 = dev_get_drvdata(dev);
 423         int status, ret = 0;
 424
 425         switch (cmd) {
 426         case RTC_VL_READ:
 427                 ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
 428                 if (ret < 0)
 429                         return ret;
 430
 431                 status = status & RV3028_STATUS_PORF ? RTC_VL_DATA_INVALID : 0;
 432                 return put_user(status, (unsigned int __user *)arg);
 433
 434         default:
 435                 return -ENOIOCTLCMD;
 436         }
 437 }
 438
 439 static int rv3028_nvram_write(void *priv, unsigned int offset, void *val,
 440                               size_t bytes)
 441 {
 442         return regmap_bulk_write(priv, RV3028_RAM1 + offset, val, bytes);
 443 }
 444
 445 static int rv3028_nvram_read(void *priv, unsigned int offset, void *val,
 446                              size_t bytes)
 447 {
 448         return regmap_bulk_read(priv, RV3028_RAM1 + offset, val, bytes);
 449 }
 450
 451 static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
 452                                size_t bytes)
 453 {
 454         u32 status, ctrl1;
 455         int i, ret, err;
 456         u8 *buf = val;
 457
 458         ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
 459         if (ret)
 460                 return ret;
 461
 462         if (!(ctrl1 & RV3028_CTRL1_EERD)) {
 463                 ret = regmap_update_bits(priv, RV3028_CTRL1,
 464                                          RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
 465                 if (ret)
 466                         return ret;
 467
 468                 ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
 469                                                !(status & RV3028_STATUS_EEBUSY),
 470                                                RV3028_EEBUSY_POLL,
 471                                                RV3028_EEBUSY_TIMEOUT);
 472                 if (ret)
 473                         goto restore_eerd;
 474         }
 475
 476         for (i = 0; i < bytes; i++) {
 477                 ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
 478                 if (ret)
 479                         goto restore_eerd;
 480
 481                 ret = regmap_write(priv, RV3028_EEPROM_DATA, buf[i]);
 482                 if (ret)
 483                         goto restore_eerd;
 484
 485                 ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
 486                 if (ret)
 487                         goto restore_eerd;
 488
 489                 ret = regmap_write(priv, RV3028_EEPROM_CMD,
 490                                    RV3028_EEPROM_CMD_WRITE);
 491                 if (ret)
 492                         goto restore_eerd;
 493
 494                 usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
 495
 496                 ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
 497                                                !(status & RV3028_STATUS_EEBUSY),
 498                                                RV3028_EEBUSY_POLL,
 499                                                RV3028_EEBUSY_TIMEOUT);
 500                 if (ret)
 501                         goto restore_eerd;
 502         }
 503
 504 restore_eerd:
 505         if (!(ctrl1 & RV3028_CTRL1_EERD))
 506         {
 507                 err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
 508                                          0);
 509                 if (err && !ret)
 510                         ret = err;
 511         }
 512
 513         return ret;
 514 }
 515
 516 static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val,
 517                               size_t bytes)
 518 {
 519         u32 status, ctrl1, data;
 520         int i, ret, err;
 521         u8 *buf = val;
 522
 523         ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
 524         if (ret)
 525                 return ret;
 526
 527         if (!(ctrl1 & RV3028_CTRL1_EERD)) {
 528                 ret = regmap_update_bits(priv, RV3028_CTRL1,
 529                                          RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
 530                 if (ret)
 531                         return ret;
 532
 533                 ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
 534                                                !(status & RV3028_STATUS_EEBUSY),
 535                                                RV3028_EEBUSY_POLL,
 536                                                RV3028_EEBUSY_TIMEOUT);
 537                 if (ret)
 538                         goto restore_eerd;
 539         }
 540
 541         for (i = 0; i < bytes; i++) {
 542                 ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
 543                 if (ret)
 544                         goto restore_eerd;
 545
 546                 ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
 547                 if (ret)
 548                         goto restore_eerd;
 549
 550                 ret = regmap_write(priv, RV3028_EEPROM_CMD,
 551                                    RV3028_EEPROM_CMD_READ);
 552                 if (ret)
 553                         goto restore_eerd;
 554
 555                 ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
 556                                                !(status & RV3028_STATUS_EEBUSY),
 557                                                RV3028_EEBUSY_POLL,
 558                                                RV3028_EEBUSY_TIMEOUT);
 559                 if (ret)
 560                         goto restore_eerd;
 561
 562                 ret = regmap_read(priv, RV3028_EEPROM_DATA, &data);
 563                 if (ret)
 564                         goto restore_eerd;
 565                 buf[i] = data;
 566         }
 567
 568 restore_eerd:
 569         if (!(ctrl1 & RV3028_CTRL1_EERD))
 570         {
 571                 err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
 572                                          0);
 573                 if (err && !ret)
 574                         ret = err;
 575         }
 576
 577         return ret;
 578 }
 579
 580 #ifdef CONFIG_COMMON_CLK
 581 #define clkout_hw_to_rv3028(hw) container_of(hw, struct rv3028_data, clkout_hw)
 582
 583 static int clkout_rates[] = {
 584         32768,
 585         8192,
 586         1024,
 587         64,
 588         32,
 589         1,
 590 };
 591
 592 static unsigned long rv3028_clkout_recalc_rate(struct clk_hw *hw,
 593                                                unsigned long parent_rate)
 594 {
 595         int clkout, ret;
 596         struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
 597
 598         ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &clkout);
 599         if (ret < 0)
 600                 return 0;
 601
 602         clkout &= RV3028_CLKOUT_FD_MASK;
 603         return clkout_rates[clkout];
 604 }
 605
 606 static long rv3028_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
 607                                      unsigned long *prate)
 608 {
 609         int i;
 610
 611         for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
 612                 if (clkout_rates[i] <= rate)
 613                         return clkout_rates[i];
 614
 615         return 0;
 616 }
 617
 618 static int rv3028_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 619                                   unsigned long parent_rate)
 620 {
 621         int i, ret;
 622         struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
 623
 624         ret = regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0);
 625         if (ret < 0)
 626                 return ret;
 627
 628         for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) {
 629                 if (clkout_rates[i] == rate) {
 630                         ret = regmap_update_bits(rv3028->regmap,
 631                                                  RV3028_CLKOUT,
 632                                                  RV3028_CLKOUT_FD_MASK, i);
 633                         if (ret < 0)
 634                                 return ret;
 635
 636                         return regmap_write(rv3028->regmap, RV3028_CLKOUT,
 637                                 RV3028_CLKOUT_CLKSY | RV3028_CLKOUT_CLKOE);
 638                 }
 639         }
 640
 641         return -EINVAL;
 642 }
 643
 644 static int rv3028_clkout_prepare(struct clk_hw *hw)
 645 {
 646         struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
 647
 648         return regmap_write(rv3028->regmap, RV3028_CLKOUT,
 649                             RV3028_CLKOUT_CLKSY | RV3028_CLKOUT_CLKOE);
 650 }
 651
 652 static void rv3028_clkout_unprepare(struct clk_hw *hw)
 653 {
 654         struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
 655
 656         regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0);
 657         regmap_update_bits(rv3028->regmap, RV3028_STATUS,
 658                            RV3028_STATUS_CLKF, 0);
 659 }
 660
 661 static int rv3028_clkout_is_prepared(struct clk_hw *hw)
 662 {
 663         int clkout, ret;
 664         struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
 665
 666         ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &clkout);
 667         if (ret < 0)
 668                 return ret;
 669
 670         return !!(clkout & RV3028_CLKOUT_CLKOE);
 671 }
 672
 673 static const struct clk_ops rv3028_clkout_ops = {
 674         .prepare = rv3028_clkout_prepare,
 675         .unprepare = rv3028_clkout_unprepare,
 676         .is_prepared = rv3028_clkout_is_prepared,
 677         .recalc_rate = rv3028_clkout_recalc_rate,
 678         .round_rate = rv3028_clkout_round_rate,
 679         .set_rate = rv3028_clkout_set_rate,
 680 };
 681
 682 static int rv3028_clkout_register_clk(struct rv3028_data *rv3028,
 683                                       struct i2c_client *client)
 684 {
 685         int ret;
 686         struct clk *clk;
 687         struct clk_init_data init;
 688         struct device_node *node = client->dev.of_node;
 689
 690         ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
 691                                  RV3028_STATUS_CLKF, 0);
 692         if (ret < 0)
 693                 return ret;
 694
 695         init.name = "rv3028-clkout";
 696         init.ops = &rv3028_clkout_ops;
 697         init.flags = 0;
 698         init.parent_names = NULL;
 699         init.num_parents = 0;
 700         rv3028->clkout_hw.init = &init;
 701
 702         /* optional override of the clockname */
 703         of_property_read_string(node, "clock-output-names", &init.name);
 704
 705         /* register the clock */
 706         clk = devm_clk_register(&client->dev, &rv3028->clkout_hw);
 707         if (!IS_ERR(clk))
 708                 of_clk_add_provider(node, of_clk_src_simple_get, clk);
 709
 710         return 0;
 711 }
 712 #endif
 713
 714 static struct rtc_class_ops rv3028_rtc_ops = {
 715         .read_time = rv3028_get_time,
 716         .set_time = rv3028_set_time,
 717         .read_offset = rv3028_read_offset,
 718         .set_offset = rv3028_set_offset,
 719         .ioctl = rv3028_ioctl,
 720 };
 721
 722 static const struct regmap_config regmap_config = {
 723         .reg_bits = 8,
 724         .val_bits = 8,
 725         .max_register = 0x37,
 726 };
 727
 728 static int rv3028_probe(struct i2c_client *client)
 729 {
 730         struct rv3028_data *rv3028;
 731         int ret, status;
 732         u32 ohms;
 733         struct nvmem_config nvmem_cfg = {
 734                 .name = "rv3028_nvram",
 735                 .word_size = 1,
 736                 .stride = 1,
 737                 .size = 2,
 738                 .type = NVMEM_TYPE_BATTERY_BACKED,
 739                 .reg_read = rv3028_nvram_read,
 740                 .reg_write = rv3028_nvram_write,
 741         };
 742         struct nvmem_config eeprom_cfg = {
 743                 .name = "rv3028_eeprom",
 744                 .word_size = 1,
 745                 .stride = 1,
 746                 .size = 43,
 747                 .type = NVMEM_TYPE_EEPROM,
 748                 .reg_read = rv3028_eeprom_read,
 749                 .reg_write = rv3028_eeprom_write,
 750         };
 751
 752         rv3028 = devm_kzalloc(&client->dev, sizeof(struct rv3028_data),
 753                               GFP_KERNEL);
 754         if (!rv3028)
 755                 return -ENOMEM;
 756
 757         rv3028->regmap = devm_regmap_init_i2c(client, &regmap_config);
 758
 759         i2c_set_clientdata(client, rv3028);
 760
 761         ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
 762         if (ret < 0)
 763                 return ret;
 764
 765         if (status & RV3028_STATUS_PORF)
 766                 dev_warn(&client->dev, "Voltage low, data loss detected.\n");
 767
 768         if (status & RV3028_STATUS_AF)
 769                 dev_warn(&client->dev, "An alarm may have been missed.\n");
 770
 771         rv3028->rtc = devm_rtc_allocate_device(&client->dev);
 772         if (IS_ERR(rv3028->rtc))
 773                 return PTR_ERR(rv3028->rtc);
 774
 775         if (client->irq > 0) {
 776                 ret = devm_request_threaded_irq(&client->dev, client->irq,
 777                                                 NULL, rv3028_handle_irq,
 778                                                 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 779                                                 "rv3028", rv3028);
 780                 if (ret) {
 781                         dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
 782                         client->irq = 0;
 783                 } else {
 784                         rv3028_rtc_ops.read_alarm = rv3028_get_alarm;
 785                         rv3028_rtc_ops.set_alarm = rv3028_set_alarm;
 786                         rv3028_rtc_ops.alarm_irq_enable = rv3028_alarm_irq_enable;
 787                 }
 788         }
 789
 790         ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1,
 791                                  RV3028_CTRL1_WADA, RV3028_CTRL1_WADA);
 792         if (ret)
 793                 return ret;
 794
 795         /* setup timestamping */
 796         ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
 797                                  RV3028_CTRL2_EIE | RV3028_CTRL2_TSE,
 798                                  RV3028_CTRL2_EIE | RV3028_CTRL2_TSE);
 799         if (ret)
 800                 return ret;
 801
 802         /* setup trickle charger */
 803         if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms",
 804                                       &ohms)) {
 805                 int i;
 806
 807                 for (i = 0; i < ARRAY_SIZE(rv3028_trickle_resistors); i++)
 808                         if (ohms == rv3028_trickle_resistors[i])
 809                                 break;
 810
 811                 if (i < ARRAY_SIZE(rv3028_trickle_resistors)) {
 812                         ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
 813                                                  RV3028_BACKUP_TCE |
 814                                                  RV3028_BACKUP_TCR_MASK,
 815                                                  RV3028_BACKUP_TCE | i);
 816                         if (ret)
 817                                 return ret;
 818                 } else {
 819                         dev_warn(&client->dev, "invalid trickle resistor value\n");
 820                 }
 821         }
 822
 823         ret = rtc_add_group(rv3028->rtc, &rv3028_attr_group);
 824         if (ret)
 825                 return ret;
 826
 827         rv3028->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
 828         rv3028->rtc->range_max = RTC_TIMESTAMP_END_2099;
 829         rv3028->rtc->ops = &rv3028_rtc_ops;
 830         ret = rtc_register_device(rv3028->rtc);
 831         if (ret)
 832                 return ret;
 833
 834         nvmem_cfg.priv = rv3028->regmap;
 835         rtc_nvmem_register(rv3028->rtc, &nvmem_cfg);
 836         eeprom_cfg.priv = rv3028->regmap;
 837         rtc_nvmem_register(rv3028->rtc, &eeprom_cfg);
 838
 839         rv3028->rtc->max_user_freq = 1;
 840
 841 #ifdef CONFIG_COMMON_CLK
 842         rv3028_clkout_register_clk(rv3028, client);
 843 #endif
 844         return 0;
 845 }
 846
 847 static const struct of_device_id rv3028_of_match[] = {
 848         { .compatible = "microcrystal,rv3028", },
 849         { }
 850 };
 851 MODULE_DEVICE_TABLE(of, rv3028_of_match);
 852
 853 static struct i2c_driver rv3028_driver = {
 854         .driver = {
 855                 .name = "rtc-rv3028",
 856                 .of_match_table = of_match_ptr(rv3028_of_match),
 857         },
 858         .probe_new      = rv3028_probe,
 859 };
 860 module_i2c_driver(rv3028_driver);
 861
 862 MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
 863 MODULE_DESCRIPTION("Micro Crystal RV3028 RTC driver");
 864 MODULE_LICENSE("GPL v2");