drivers/rtc/rtc-zynqmp.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
   4  *
   5  * Copyright (C) 2015 Xilinx, Inc.
   6  *
   7  */
   8
   9 #include <linux/delay.h>
  10 #include <linux/init.h>
  11 #include <linux/io.h>
  12 #include <linux/module.h>
  13 #include <linux/of.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/rtc.h>
  16
  17 /* RTC Registers */
  18 #define RTC_SET_TM_WR           0x00
  19 #define RTC_SET_TM_RD           0x04
  20 #define RTC_CALIB_WR            0x08
  21 #define RTC_CALIB_RD            0x0C
  22 #define RTC_CUR_TM              0x10
  23 #define RTC_CUR_TICK            0x14
  24 #define RTC_ALRM                0x18
  25 #define RTC_INT_STS             0x20
  26 #define RTC_INT_MASK            0x24
  27 #define RTC_INT_EN              0x28
  28 #define RTC_INT_DIS             0x2C
  29 #define RTC_CTRL                0x40
  30
  31 #define RTC_FR_EN               BIT(20)
  32 #define RTC_FR_DATSHIFT         16
  33 #define RTC_TICK_MASK           0xFFFF
  34 #define RTC_INT_SEC             BIT(0)
  35 #define RTC_INT_ALRM            BIT(1)
  36 #define RTC_OSC_EN              BIT(24)
  37 #define RTC_BATT_EN             BIT(31)
  38
  39 #define RTC_CALIB_DEF           0x198233
  40 #define RTC_CALIB_MASK          0x1FFFFF
  41 #define RTC_ALRM_MASK          BIT(1)
  42 #define RTC_MSEC               1000
  43
  44 struct xlnx_rtc_dev {
  45         struct rtc_device       *rtc;
  46         void __iomem            *reg_base;
  47         int                     alarm_irq;
  48         int                     sec_irq;
  49         unsigned int            calibval;
  50 };
  51
  52 static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
  53 {
  54         struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
  55         unsigned long new_time;
  56
  57         /*
  58          * The value written will be updated after 1 sec into the
  59          * seconds read register, so we need to program time +1 sec
  60          * to get the correct time on read.
  61          */
  62         new_time = rtc_tm_to_time64(tm) + 1;
  63
  64         /*
  65          * Writing into calibration register will clear the Tick Counter and
  66          * force the next second to be signaled exactly in 1 second period
  67          */
  68         xrtcdev->calibval &= RTC_CALIB_MASK;
  69         writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
  70
  71         writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
  72
  73         /*
  74          * Clear the rtc interrupt status register after setting the
  75          * time. During a read_time function, the code should read the
  76          * RTC_INT_STATUS register and if bit 0 is still 0, it means
  77          * that one second has not elapsed yet since RTC was set and
  78          * the current time should be read from SET_TIME_READ register;
  79          * otherwise, CURRENT_TIME register is read to report the time
  80          */
  81         writel(RTC_INT_SEC, xrtcdev->reg_base + RTC_INT_STS);
  82
  83         return 0;
  84 }
  85
  86 static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
  87 {
  88         u32 status;
  89         unsigned long read_time;
  90         struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
  91
  92         status = readl(xrtcdev->reg_base + RTC_INT_STS);
  93
  94         if (status & RTC_INT_SEC) {
  95                 /*
  96                  * RTC has updated the CURRENT_TIME with the time written into
  97                  * SET_TIME_WRITE register.
  98                  */
  99                 read_time = readl(xrtcdev->reg_base + RTC_CUR_TM);
 100         } else {
 101                 /*
 102                  * Time written in SET_TIME_WRITE has not yet updated into
 103                  * the seconds read register, so read the time from the
 104                  * SET_TIME_WRITE instead of CURRENT_TIME register.
 105                  * Since we add +1 sec while writing, we need to -1 sec while
 106                  * reading.
 107                  */
 108                 read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
 109         }
 110         rtc_time64_to_tm(read_time, tm);
 111
 112         return 0;
 113 }
 114
 115 static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 116 {
 117         struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
 118
 119         rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
 120         alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;
 121
 122         return 0;
 123 }
 124
 125 static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
 126 {
 127         struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
 128         unsigned int status;
 129         ulong timeout;
 130
 131         timeout = jiffies + msecs_to_jiffies(RTC_MSEC);
 132
 133         if (enabled) {
 134                 while (1) {
 135                         status = readl(xrtcdev->reg_base + RTC_INT_STS);
 136                         if (!((status & RTC_ALRM_MASK) == RTC_ALRM_MASK))
 137                                 break;
 138
 139                         if (time_after_eq(jiffies, timeout)) {
 140                                 dev_err(dev, "Time out occur, while clearing alarm status bit\n");
 141                                 return -ETIMEDOUT;
 142                         }
 143                         writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);
 144                 }
 145
 146                 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
 147         } else {
 148                 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
 149         }
 150
 151         return 0;
 152 }
 153
 154 static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 155 {
 156         struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
 157         unsigned long alarm_time;
 158
 159         alarm_time = rtc_tm_to_time64(&alrm->time);
 160
 161         writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));
 162
 163         xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);
 164
 165         return 0;
 166 }
 167
 168 static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
 169 {
 170         u32 rtc_ctrl;
 171
 172         /* Enable RTC switch to battery when VCC_PSAUX is not available */
 173         rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
 174         rtc_ctrl |= RTC_BATT_EN;
 175         writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
 176
 177         /*
 178          * Based on crystal freq of 33.330 KHz
 179          * set the seconds counter and enable, set fractions counter
 180          * to default value suggested as per design spec
 181          * to correct RTC delay in frequency over period of time.
 182          */
 183         xrtcdev->calibval &= RTC_CALIB_MASK;
 184         writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
 185 }
 186
 187 static const struct rtc_class_ops xlnx_rtc_ops = {
 188         .set_time         = xlnx_rtc_set_time,
 189         .read_time        = xlnx_rtc_read_time,
 190         .read_alarm       = xlnx_rtc_read_alarm,
 191         .set_alarm        = xlnx_rtc_set_alarm,
 192         .alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
 193 };
 194
 195 static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
 196 {
 197         struct xlnx_rtc_dev *xrtcdev = (struct xlnx_rtc_dev *)id;
 198         unsigned int status;
 199
 200         status = readl(xrtcdev->reg_base + RTC_INT_STS);
 201         /* Check if interrupt asserted */
 202         if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
 203                 return IRQ_NONE;
 204
 205         /* Disable RTC_INT_ALRM interrupt only */
 206         writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
 207
 208         if (status & RTC_INT_ALRM)
 209                 rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);
 210
 211         return IRQ_HANDLED;
 212 }
 213
 214 static int xlnx_rtc_probe(struct platform_device *pdev)
 215 {
 216         struct xlnx_rtc_dev *xrtcdev;
 217         int ret;
 218
 219         xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
 220         if (!xrtcdev)
 221                 return -ENOMEM;
 222
 223         platform_set_drvdata(pdev, xrtcdev);
 224
 225         xrtcdev->rtc = devm_rtc_allocate_device(&pdev->dev);
 226         if (IS_ERR(xrtcdev->rtc))
 227                 return PTR_ERR(xrtcdev->rtc);
 228
 229         xrtcdev->rtc->ops = &xlnx_rtc_ops;
 230         xrtcdev->rtc->range_max = U32_MAX;
 231
 232         xrtcdev->reg_base = devm_platform_ioremap_resource(pdev, 0);
 233         if (IS_ERR(xrtcdev->reg_base))
 234                 return PTR_ERR(xrtcdev->reg_base);
 235
 236         xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
 237         if (xrtcdev->alarm_irq < 0)
 238                 return xrtcdev->alarm_irq;
 239         ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
 240                                xlnx_rtc_interrupt, 0,
 241                                dev_name(&pdev->dev), xrtcdev);
 242         if (ret) {
 243                 dev_err(&pdev->dev, "request irq failed\n");
 244                 return ret;
 245         }
 246
 247         xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
 248         if (xrtcdev->sec_irq < 0)
 249                 return xrtcdev->sec_irq;
 250         ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
 251                                xlnx_rtc_interrupt, 0,
 252                                dev_name(&pdev->dev), xrtcdev);
 253         if (ret) {
 254                 dev_err(&pdev->dev, "request irq failed\n");
 255                 return ret;
 256         }
 257
 258         ret = of_property_read_u32(pdev->dev.of_node, "calibration",
 259                                    &xrtcdev->calibval);
 260         if (ret)
 261                 xrtcdev->calibval = RTC_CALIB_DEF;
 262
 263         xlnx_init_rtc(xrtcdev);
 264
 265         device_init_wakeup(&pdev->dev, 1);
 266
 267         return devm_rtc_register_device(xrtcdev->rtc);
 268 }
 269
 270 static int xlnx_rtc_remove(struct platform_device *pdev)
 271 {
 272         xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
 273         device_init_wakeup(&pdev->dev, 0);
 274
 275         return 0;
 276 }
 277
 278 static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
 279 {
 280         struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
 281
 282         if (device_may_wakeup(dev))
 283                 enable_irq_wake(xrtcdev->alarm_irq);
 284         else
 285                 xlnx_rtc_alarm_irq_enable(dev, 0);
 286
 287         return 0;
 288 }
 289
 290 static int __maybe_unused xlnx_rtc_resume(struct device *dev)
 291 {
 292         struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
 293
 294         if (device_may_wakeup(dev))
 295                 disable_irq_wake(xrtcdev->alarm_irq);
 296         else
 297                 xlnx_rtc_alarm_irq_enable(dev, 1);
 298
 299         return 0;
 300 }
 301
 302 static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);
 303
 304 static const struct of_device_id xlnx_rtc_of_match[] = {
 305         {.compatible = "xlnx,zynqmp-rtc" },
 306         { }
 307 };
 308 MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);
 309
 310 static struct platform_driver xlnx_rtc_driver = {
 311         .probe          = xlnx_rtc_probe,
 312         .remove         = xlnx_rtc_remove,
 313         .driver         = {
 314                 .name   = KBUILD_MODNAME,
 315                 .pm     = &xlnx_rtc_pm_ops,
 316                 .of_match_table = xlnx_rtc_of_match,
 317         },
 318 };
 319
 320 module_platform_driver(xlnx_rtc_driver);
 321
 322 MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
 323 MODULE_AUTHOR("Xilinx Inc.");
 324 MODULE_LICENSE("GPL v2");