2 * Adaptec AAC series RAID controller driver
3 * (c) Copyright 2001 Red Hat Inc.
5 * based on the old aacraid driver that is..
6 * Adaptec aacraid device driver for Linux.
8 * Copyright (c) 2000-2010 Adaptec, Inc.
9 * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
10 * 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
29 * Abstract: Contains Interfaces to manage IOs.
33 #include <linux/kernel.h>
34 #include <linux/init.h>
35 #include <linux/types.h>
36 #include <linux/pci.h>
37 #include <linux/spinlock.h>
38 #include <linux/slab.h>
39 #include <linux/completion.h>
40 #include <linux/blkdev.h>
41 #include <linux/uaccess.h>
42 #include <linux/highmem.h> /* For flush_kernel_dcache_page */
43 #include <linux/module.h>
45 #include <scsi/scsi.h>
46 #include <scsi/scsi_cmnd.h>
47 #include <scsi/scsi_device.h>
48 #include <scsi/scsi_host.h>
52 /* values for inqd_pdt: Peripheral device type in plain English */
53 #define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
54 #define INQD_PDT_PROC 0x03 /* Processor device */
55 #define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
56 #define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
57 #define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
58 #define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
60 #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
61 #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
67 #define SENCODE_NO_SENSE 0x00
68 #define SENCODE_END_OF_DATA 0x00
69 #define SENCODE_BECOMING_READY 0x04
70 #define SENCODE_INIT_CMD_REQUIRED 0x04
71 #define SENCODE_UNRECOVERED_READ_ERROR 0x11
72 #define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
73 #define SENCODE_INVALID_COMMAND 0x20
74 #define SENCODE_LBA_OUT_OF_RANGE 0x21
75 #define SENCODE_INVALID_CDB_FIELD 0x24
76 #define SENCODE_LUN_NOT_SUPPORTED 0x25
77 #define SENCODE_INVALID_PARAM_FIELD 0x26
78 #define SENCODE_PARAM_NOT_SUPPORTED 0x26
79 #define SENCODE_PARAM_VALUE_INVALID 0x26
80 #define SENCODE_RESET_OCCURRED 0x29
81 #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
82 #define SENCODE_INQUIRY_DATA_CHANGED 0x3F
83 #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
84 #define SENCODE_DIAGNOSTIC_FAILURE 0x40
85 #define SENCODE_INTERNAL_TARGET_FAILURE 0x44
86 #define SENCODE_INVALID_MESSAGE_ERROR 0x49
87 #define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
88 #define SENCODE_OVERLAPPED_COMMAND 0x4E
91 * Additional sense codes
94 #define ASENCODE_NO_SENSE 0x00
95 #define ASENCODE_END_OF_DATA 0x05
96 #define ASENCODE_BECOMING_READY 0x01
97 #define ASENCODE_INIT_CMD_REQUIRED 0x02
98 #define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
99 #define ASENCODE_INVALID_COMMAND 0x00
100 #define ASENCODE_LBA_OUT_OF_RANGE 0x00
101 #define ASENCODE_INVALID_CDB_FIELD 0x00
102 #define ASENCODE_LUN_NOT_SUPPORTED 0x00
103 #define ASENCODE_INVALID_PARAM_FIELD 0x00
104 #define ASENCODE_PARAM_NOT_SUPPORTED 0x01
105 #define ASENCODE_PARAM_VALUE_INVALID 0x02
106 #define ASENCODE_RESET_OCCURRED 0x00
107 #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
108 #define ASENCODE_INQUIRY_DATA_CHANGED 0x03
109 #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
110 #define ASENCODE_DIAGNOSTIC_FAILURE 0x80
111 #define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
112 #define ASENCODE_INVALID_MESSAGE_ERROR 0x00
113 #define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
114 #define ASENCODE_OVERLAPPED_COMMAND 0x00
116 #define AAC_STAT_GOOD (DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD)
118 #define BYTE0(x) (unsigned char)(x)
119 #define BYTE1(x) (unsigned char)((x) >> 8)
120 #define BYTE2(x) (unsigned char)((x) >> 16)
121 #define BYTE3(x) (unsigned char)((x) >> 24)
123 /* MODE_SENSE data format */
130 } __attribute__((packed
)) hd
;
136 } __attribute__((packed
)) bd
;
138 } __attribute__((packed
)) aac_modep_data
;
140 /* MODE_SENSE_10 data format */
148 } __attribute__((packed
)) hd
;
154 } __attribute__((packed
)) bd
;
156 } __attribute__((packed
)) aac_modep10_data
;
158 /*------------------------------------------------------------------------------
159 * S T R U C T S / T Y P E D E F S
160 *----------------------------------------------------------------------------*/
161 /* SCSI inquiry data */
162 struct inquiry_data
{
163 u8 inqd_pdt
; /* Peripheral qualifier | Peripheral Device Type */
164 u8 inqd_dtq
; /* RMB | Device Type Qualifier */
165 u8 inqd_ver
; /* ISO version | ECMA version | ANSI-approved version */
166 u8 inqd_rdf
; /* AENC | TrmIOP | Response data format */
167 u8 inqd_len
; /* Additional length (n-4) */
168 u8 inqd_pad1
[2];/* Reserved - must be zero */
169 u8 inqd_pad2
; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
170 u8 inqd_vid
[8]; /* Vendor ID */
171 u8 inqd_pid
[16];/* Product ID */
172 u8 inqd_prl
[4]; /* Product Revision Level */
175 /* Added for VPD 0x83 */
176 struct tvpd_id_descriptor_type_1
{
177 u8 codeset
:4; /* VPD_CODE_SET */
179 u8 identifiertype
:4; /* VPD_IDENTIFIER_TYPE */
185 u8 serialnumber
[8]; /* SN in ASCII */
189 struct tvpd_id_descriptor_type_2
{
190 u8 codeset
:4; /* VPD_CODE_SET */
192 u8 identifiertype
:4; /* VPD_IDENTIFIER_TYPE */
198 /* The serial number supposed to be 40 bits,
199 * bit we only support 32, so make the last byte zero. */
206 struct tvpd_id_descriptor_type_3
{
207 u8 codeset
: 4; /* VPD_CODE_SET */
209 u8 identifiertype
: 4; /* VPD_IDENTIFIER_TYPE */
218 u8 DeviceTypeQualifier
:3;
222 struct tvpd_id_descriptor_type_1 type1
;
223 struct tvpd_id_descriptor_type_2 type2
;
224 struct tvpd_id_descriptor_type_3 type3
;
228 * M O D U L E G L O B A L S
231 static long aac_build_sg(struct scsi_cmnd
*scsicmd
, struct sgmap
*sgmap
);
232 static long aac_build_sg64(struct scsi_cmnd
*scsicmd
, struct sgmap64
*psg
);
233 static long aac_build_sgraw(struct scsi_cmnd
*scsicmd
, struct sgmapraw
*psg
);
234 static long aac_build_sgraw2(struct scsi_cmnd
*scsicmd
,
235 struct aac_raw_io2
*rio2
, int sg_max
);
236 static long aac_build_sghba(struct scsi_cmnd
*scsicmd
,
237 struct aac_hba_cmd_req
*hbacmd
,
238 int sg_max
, u64 sg_address
);
239 static int aac_convert_sgraw2(struct aac_raw_io2
*rio2
,
240 int pages
, int nseg
, int nseg_new
);
241 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
);
242 static int aac_send_hba_fib(struct scsi_cmnd
*scsicmd
);
243 #ifdef AAC_DETAILED_STATUS_INFO
244 static char *aac_get_status_string(u32 status
);
248 * Non dasd selection is handled entirely in aachba now
251 static int nondasd
= -1;
252 static int aac_cache
= 2; /* WCE=0 to avoid performance problems */
253 static int dacmode
= -1;
256 int startup_timeout
= 180;
257 int aif_timeout
= 120;
258 int aac_sync_mode
; /* Only Sync. transfer - disabled */
259 int aac_convert_sgl
= 1; /* convert non-conformable s/g list - enabled */
261 module_param(aac_sync_mode
, int, S_IRUGO
|S_IWUSR
);
262 MODULE_PARM_DESC(aac_sync_mode
, "Force sync. transfer mode"
264 module_param(aac_convert_sgl
, int, S_IRUGO
|S_IWUSR
);
265 MODULE_PARM_DESC(aac_convert_sgl
, "Convert non-conformable s/g list"
267 module_param(nondasd
, int, S_IRUGO
|S_IWUSR
);
268 MODULE_PARM_DESC(nondasd
, "Control scanning of hba for nondasd devices."
270 module_param_named(cache
, aac_cache
, int, S_IRUGO
|S_IWUSR
);
271 MODULE_PARM_DESC(cache
, "Disable Queue Flush commands:\n"
272 "\tbit 0 - Disable FUA in WRITE SCSI commands\n"
273 "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
274 "\tbit 2 - Disable only if Battery is protecting Cache");
275 module_param(dacmode
, int, S_IRUGO
|S_IWUSR
);
276 MODULE_PARM_DESC(dacmode
, "Control whether dma addressing is using 64 bit DAC."
278 module_param_named(commit
, aac_commit
, int, S_IRUGO
|S_IWUSR
);
279 MODULE_PARM_DESC(commit
, "Control whether a COMMIT_CONFIG is issued to the"
280 " adapter for foreign arrays.\n"
281 "This is typically needed in systems that do not have a BIOS."
283 module_param_named(msi
, aac_msi
, int, S_IRUGO
|S_IWUSR
);
284 MODULE_PARM_DESC(msi
, "IRQ handling."
285 " 0=PIC(default), 1=MSI, 2=MSI-X)");
286 module_param(startup_timeout
, int, S_IRUGO
|S_IWUSR
);
287 MODULE_PARM_DESC(startup_timeout
, "The duration of time in seconds to wait for"
288 " adapter to have it's kernel up and\n"
289 "running. This is typically adjusted for large systems that do not"
291 module_param(aif_timeout
, int, S_IRUGO
|S_IWUSR
);
292 MODULE_PARM_DESC(aif_timeout
, "The duration of time in seconds to wait for"
293 " applications to pick up AIFs before\n"
294 "deregistering them. This is typically adjusted for heavily burdened"
298 module_param(aac_fib_dump
, int, 0644);
299 MODULE_PARM_DESC(aac_fib_dump
, "Dump controller fibs prior to IOP_RESET 0=off, 1=on");
302 module_param(numacb
, int, S_IRUGO
|S_IWUSR
);
303 MODULE_PARM_DESC(numacb
, "Request a limit to the number of adapter control"
304 " blocks (FIB) allocated. Valid values are 512 and down. Default is"
305 " to use suggestion from Firmware.");
308 module_param(acbsize
, int, S_IRUGO
|S_IWUSR
);
309 MODULE_PARM_DESC(acbsize
, "Request a specific adapter control block (FIB)"
310 " size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
311 " suggestion from Firmware.");
313 int update_interval
= 30 * 60;
314 module_param(update_interval
, int, S_IRUGO
|S_IWUSR
);
315 MODULE_PARM_DESC(update_interval
, "Interval in seconds between time sync"
316 " updates issued to adapter.");
318 int check_interval
= 60;
319 module_param(check_interval
, int, S_IRUGO
|S_IWUSR
);
320 MODULE_PARM_DESC(check_interval
, "Interval in seconds between adapter health"
323 int aac_check_reset
= 1;
324 module_param_named(check_reset
, aac_check_reset
, int, S_IRUGO
|S_IWUSR
);
325 MODULE_PARM_DESC(check_reset
, "If adapter fails health check, reset the"
326 " adapter. a value of -1 forces the reset to adapters programmed to"
329 int expose_physicals
= -1;
330 module_param(expose_physicals
, int, S_IRUGO
|S_IWUSR
);
331 MODULE_PARM_DESC(expose_physicals
, "Expose physical components of the arrays."
332 " -1=protect 0=off, 1=on");
334 int aac_reset_devices
;
335 module_param_named(reset_devices
, aac_reset_devices
, int, S_IRUGO
|S_IWUSR
);
336 MODULE_PARM_DESC(reset_devices
, "Force an adapter reset at initialization.");
339 module_param_named(wwn
, aac_wwn
, int, S_IRUGO
|S_IWUSR
);
340 MODULE_PARM_DESC(wwn
, "Select a WWN type for the arrays:\n"
342 "\t1 - Array Meta Data Signature (default)\n"
343 "\t2 - Adapter Serial Number");
346 static inline int aac_valid_context(struct scsi_cmnd
*scsicmd
,
347 struct fib
*fibptr
) {
348 struct scsi_device
*device
;
350 if (unlikely(!scsicmd
|| !scsicmd
->scsi_done
)) {
351 dprintk((KERN_WARNING
"aac_valid_context: scsi command corrupt\n"));
352 aac_fib_complete(fibptr
);
355 scsicmd
->SCp
.phase
= AAC_OWNER_MIDLEVEL
;
356 device
= scsicmd
->device
;
357 if (unlikely(!device
)) {
358 dprintk((KERN_WARNING
"aac_valid_context: scsi device corrupt\n"));
359 aac_fib_complete(fibptr
);
366 * aac_get_config_status - check the adapter configuration
367 * @common: adapter to query
369 * Query config status, and commit the configuration if needed.
371 int aac_get_config_status(struct aac_dev
*dev
, int commit_flag
)
376 if (!(fibptr
= aac_fib_alloc(dev
)))
379 aac_fib_init(fibptr
);
381 struct aac_get_config_status
*dinfo
;
382 dinfo
= (struct aac_get_config_status
*) fib_data(fibptr
);
384 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
385 dinfo
->type
= cpu_to_le32(CT_GET_CONFIG_STATUS
);
386 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_config_status_resp
*)NULL
)->data
));
389 status
= aac_fib_send(ContainerCommand
,
391 sizeof (struct aac_get_config_status
),
396 printk(KERN_WARNING
"aac_get_config_status: SendFIB failed.\n");
398 struct aac_get_config_status_resp
*reply
399 = (struct aac_get_config_status_resp
*) fib_data(fibptr
);
400 dprintk((KERN_WARNING
401 "aac_get_config_status: response=%d status=%d action=%d\n",
402 le32_to_cpu(reply
->response
),
403 le32_to_cpu(reply
->status
),
404 le32_to_cpu(reply
->data
.action
)));
405 if ((le32_to_cpu(reply
->response
) != ST_OK
) ||
406 (le32_to_cpu(reply
->status
) != CT_OK
) ||
407 (le32_to_cpu(reply
->data
.action
) > CFACT_PAUSE
)) {
408 printk(KERN_WARNING
"aac_get_config_status: Will not issue the Commit Configuration\n");
412 /* Do not set XferState to zero unless receives a response from F/W */
414 aac_fib_complete(fibptr
);
416 /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
418 if ((aac_commit
== 1) || commit_flag
) {
419 struct aac_commit_config
* dinfo
;
420 aac_fib_init(fibptr
);
421 dinfo
= (struct aac_commit_config
*) fib_data(fibptr
);
423 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
424 dinfo
->type
= cpu_to_le32(CT_COMMIT_CONFIG
);
426 status
= aac_fib_send(ContainerCommand
,
428 sizeof (struct aac_commit_config
),
432 /* Do not set XferState to zero unless
433 * receives a response from F/W */
435 aac_fib_complete(fibptr
);
436 } else if (aac_commit
== 0) {
438 "aac_get_config_status: Foreign device configurations are being ignored\n");
441 /* FIB should be freed only after getting the response from the F/W */
442 if (status
!= -ERESTARTSYS
)
443 aac_fib_free(fibptr
);
447 static void aac_expose_phy_device(struct scsi_cmnd
*scsicmd
)
450 scsi_sg_copy_to_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
451 if ((inq_data
& 0x20) && (inq_data
& 0x1f) == TYPE_DISK
) {
453 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
458 * aac_get_containers - list containers
459 * @common: adapter to probe
461 * Make a list of all containers on this controller
463 int aac_get_containers(struct aac_dev
*dev
)
465 struct fsa_dev_info
*fsa_dev_ptr
;
469 struct aac_get_container_count
*dinfo
;
470 struct aac_get_container_count_resp
*dresp
;
471 int maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
473 if (!(fibptr
= aac_fib_alloc(dev
)))
476 aac_fib_init(fibptr
);
477 dinfo
= (struct aac_get_container_count
*) fib_data(fibptr
);
478 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
479 dinfo
->type
= cpu_to_le32(CT_GET_CONTAINER_COUNT
);
481 status
= aac_fib_send(ContainerCommand
,
483 sizeof (struct aac_get_container_count
),
488 dresp
= (struct aac_get_container_count_resp
*)fib_data(fibptr
);
489 maximum_num_containers
= le32_to_cpu(dresp
->ContainerSwitchEntries
);
490 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
491 AAC_OPTION_SUPPORTED_240_VOLUMES
) {
492 maximum_num_containers
=
493 le32_to_cpu(dresp
->MaxSimpleVolumes
);
495 aac_fib_complete(fibptr
);
497 /* FIB should be freed only after getting the response from the F/W */
498 if (status
!= -ERESTARTSYS
)
499 aac_fib_free(fibptr
);
501 if (maximum_num_containers
< MAXIMUM_NUM_CONTAINERS
)
502 maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
503 if (dev
->fsa_dev
== NULL
||
504 dev
->maximum_num_containers
!= maximum_num_containers
) {
506 fsa_dev_ptr
= dev
->fsa_dev
;
508 dev
->fsa_dev
= kcalloc(maximum_num_containers
,
509 sizeof(*fsa_dev_ptr
), GFP_KERNEL
);
518 dev
->maximum_num_containers
= maximum_num_containers
;
520 for (index
= 0; index
< dev
->maximum_num_containers
; index
++) {
521 dev
->fsa_dev
[index
].devname
[0] = '\0';
522 dev
->fsa_dev
[index
].valid
= 0;
524 status
= aac_probe_container(dev
, index
);
527 printk(KERN_WARNING
"aac_get_containers: SendFIB failed.\n");
534 static void get_container_name_callback(void *context
, struct fib
* fibptr
)
536 struct aac_get_name_resp
* get_name_reply
;
537 struct scsi_cmnd
* scsicmd
;
539 scsicmd
= (struct scsi_cmnd
*) context
;
541 if (!aac_valid_context(scsicmd
, fibptr
))
544 dprintk((KERN_DEBUG
"get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies
));
545 BUG_ON(fibptr
== NULL
);
547 get_name_reply
= (struct aac_get_name_resp
*) fib_data(fibptr
);
548 /* Failure is irrelevant, using default value instead */
549 if ((le32_to_cpu(get_name_reply
->status
) == CT_OK
)
550 && (get_name_reply
->data
[0] != '\0')) {
551 char *sp
= get_name_reply
->data
;
552 sp
[sizeof(((struct aac_get_name_resp
*)NULL
)->data
)] = '\0';
556 struct inquiry_data inq
;
557 char d
[sizeof(((struct inquiry_data
*)NULL
)->inqd_pid
)];
558 int count
= sizeof(d
);
561 *dp
++ = (*sp
) ? *sp
++ : ' ';
562 } while (--count
> 0);
564 scsi_sg_copy_to_buffer(scsicmd
, &inq
, sizeof(inq
));
565 memcpy(inq
.inqd_pid
, d
, sizeof(d
));
566 scsi_sg_copy_from_buffer(scsicmd
, &inq
, sizeof(inq
));
570 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
572 aac_fib_complete(fibptr
);
573 scsicmd
->scsi_done(scsicmd
);
577 * aac_get_container_name - get container name, none blocking.
579 static int aac_get_container_name(struct scsi_cmnd
* scsicmd
)
582 struct aac_get_name
*dinfo
;
583 struct fib
* cmd_fibcontext
;
584 struct aac_dev
* dev
;
586 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
588 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
590 aac_fib_init(cmd_fibcontext
);
591 dinfo
= (struct aac_get_name
*) fib_data(cmd_fibcontext
);
593 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
594 dinfo
->type
= cpu_to_le32(CT_READ_NAME
);
595 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
596 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_name_resp
*)NULL
)->data
));
598 status
= aac_fib_send(ContainerCommand
,
600 sizeof(struct aac_get_name_resp
),
603 (fib_callback
)get_container_name_callback
,
607 * Check that the command queued to the controller
609 if (status
== -EINPROGRESS
) {
610 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
614 printk(KERN_WARNING
"aac_get_container_name: aac_fib_send failed with status: %d.\n", status
);
615 aac_fib_complete(cmd_fibcontext
);
619 static int aac_probe_container_callback2(struct scsi_cmnd
* scsicmd
)
621 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
623 if ((fsa_dev_ptr
[scmd_id(scsicmd
)].valid
& 1))
624 return aac_scsi_cmd(scsicmd
);
626 scsicmd
->result
= DID_NO_CONNECT
<< 16;
627 scsicmd
->scsi_done(scsicmd
);
631 static void _aac_probe_container2(void * context
, struct fib
* fibptr
)
633 struct fsa_dev_info
*fsa_dev_ptr
;
634 int (*callback
)(struct scsi_cmnd
*);
635 struct scsi_cmnd
* scsicmd
= (struct scsi_cmnd
*)context
;
639 if (!aac_valid_context(scsicmd
, fibptr
))
642 scsicmd
->SCp
.Status
= 0;
643 fsa_dev_ptr
= fibptr
->dev
->fsa_dev
;
645 struct aac_mount
* dresp
= (struct aac_mount
*) fib_data(fibptr
);
648 fsa_dev_ptr
+= scmd_id(scsicmd
);
650 fibptr
->dev
->supplement_adapter_info
.supported_options2
;
652 if ((le32_to_cpu(dresp
->status
) == ST_OK
) &&
653 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
) &&
654 (le32_to_cpu(dresp
->mnt
[0].state
) != FSCS_HIDDEN
)) {
655 if (!(sup_options2
& AAC_OPTION_VARIABLE_BLOCK_SIZE
)) {
656 dresp
->mnt
[0].fileinfo
.bdevinfo
.block_size
= 0x200;
657 fsa_dev_ptr
->block_size
= 0x200;
659 fsa_dev_ptr
->block_size
=
660 le32_to_cpu(dresp
->mnt
[0].fileinfo
.bdevinfo
.block_size
);
662 for (i
= 0; i
< 16; i
++)
663 fsa_dev_ptr
->identifier
[i
] =
664 dresp
->mnt
[0].fileinfo
.bdevinfo
666 fsa_dev_ptr
->valid
= 1;
667 /* sense_key holds the current state of the spin-up */
668 if (dresp
->mnt
[0].state
& cpu_to_le32(FSCS_NOT_READY
))
669 fsa_dev_ptr
->sense_data
.sense_key
= NOT_READY
;
670 else if (fsa_dev_ptr
->sense_data
.sense_key
== NOT_READY
)
671 fsa_dev_ptr
->sense_data
.sense_key
= NO_SENSE
;
672 fsa_dev_ptr
->type
= le32_to_cpu(dresp
->mnt
[0].vol
);
674 = ((u64
)le32_to_cpu(dresp
->mnt
[0].capacity
)) +
675 (((u64
)le32_to_cpu(dresp
->mnt
[0].capacityhigh
)) << 32);
676 fsa_dev_ptr
->ro
= ((le32_to_cpu(dresp
->mnt
[0].state
) & FSCS_READONLY
) != 0);
678 if ((fsa_dev_ptr
->valid
& 1) == 0)
679 fsa_dev_ptr
->valid
= 0;
680 scsicmd
->SCp
.Status
= le32_to_cpu(dresp
->count
);
682 aac_fib_complete(fibptr
);
683 aac_fib_free(fibptr
);
684 callback
= (int (*)(struct scsi_cmnd
*))(scsicmd
->SCp
.ptr
);
685 scsicmd
->SCp
.ptr
= NULL
;
686 (*callback
)(scsicmd
);
690 static void _aac_probe_container1(void * context
, struct fib
* fibptr
)
692 struct scsi_cmnd
* scsicmd
;
693 struct aac_mount
* dresp
;
694 struct aac_query_mount
*dinfo
;
697 dresp
= (struct aac_mount
*) fib_data(fibptr
);
698 if (!(fibptr
->dev
->supplement_adapter_info
.supported_options2
&
699 AAC_OPTION_VARIABLE_BLOCK_SIZE
))
700 dresp
->mnt
[0].capacityhigh
= 0;
701 if ((le32_to_cpu(dresp
->status
) != ST_OK
) ||
702 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
)) {
703 _aac_probe_container2(context
, fibptr
);
706 scsicmd
= (struct scsi_cmnd
*) context
;
708 if (!aac_valid_context(scsicmd
, fibptr
))
711 aac_fib_init(fibptr
);
713 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
715 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
716 AAC_OPTION_VARIABLE_BLOCK_SIZE
)
717 dinfo
->command
= cpu_to_le32(VM_NameServeAllBlk
);
719 dinfo
->command
= cpu_to_le32(VM_NameServe64
);
721 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
722 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
724 status
= aac_fib_send(ContainerCommand
,
726 sizeof(struct aac_query_mount
),
729 _aac_probe_container2
,
732 * Check that the command queued to the controller
734 if (status
== -EINPROGRESS
)
735 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
736 else if (status
< 0) {
737 /* Inherit results from VM_NameServe, if any */
738 dresp
->status
= cpu_to_le32(ST_OK
);
739 _aac_probe_container2(context
, fibptr
);
743 static int _aac_probe_container(struct scsi_cmnd
* scsicmd
, int (*callback
)(struct scsi_cmnd
*))
746 int status
= -ENOMEM
;
748 if ((fibptr
= aac_fib_alloc((struct aac_dev
*)scsicmd
->device
->host
->hostdata
))) {
749 struct aac_query_mount
*dinfo
;
751 aac_fib_init(fibptr
);
753 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
755 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
756 AAC_OPTION_VARIABLE_BLOCK_SIZE
)
757 dinfo
->command
= cpu_to_le32(VM_NameServeAllBlk
);
759 dinfo
->command
= cpu_to_le32(VM_NameServe
);
761 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
762 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
763 scsicmd
->SCp
.ptr
= (char *)callback
;
765 status
= aac_fib_send(ContainerCommand
,
767 sizeof(struct aac_query_mount
),
770 _aac_probe_container1
,
773 * Check that the command queued to the controller
775 if (status
== -EINPROGRESS
) {
776 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
780 scsicmd
->SCp
.ptr
= NULL
;
781 aac_fib_complete(fibptr
);
782 aac_fib_free(fibptr
);
786 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
788 fsa_dev_ptr
+= scmd_id(scsicmd
);
789 if ((fsa_dev_ptr
->valid
& 1) == 0) {
790 fsa_dev_ptr
->valid
= 0;
791 return (*callback
)(scsicmd
);
799 * aac_probe_container - query a logical volume
800 * @dev: device to query
801 * @cid: container identifier
803 * Queries the controller about the given volume. The volume information
804 * is updated in the struct fsa_dev_info structure rather than returned.
806 static int aac_probe_container_callback1(struct scsi_cmnd
* scsicmd
)
808 scsicmd
->device
= NULL
;
812 int aac_probe_container(struct aac_dev
*dev
, int cid
)
814 struct scsi_cmnd
*scsicmd
= kmalloc(sizeof(*scsicmd
), GFP_KERNEL
);
815 struct scsi_device
*scsidev
= kmalloc(sizeof(*scsidev
), GFP_KERNEL
);
818 if (!scsicmd
|| !scsidev
) {
823 scsicmd
->list
.next
= NULL
;
824 scsicmd
->scsi_done
= (void (*)(struct scsi_cmnd
*))aac_probe_container_callback1
;
826 scsicmd
->device
= scsidev
;
827 scsidev
->sdev_state
= 0;
829 scsidev
->host
= dev
->scsi_host_ptr
;
831 if (_aac_probe_container(scsicmd
, aac_probe_container_callback1
) == 0)
832 while (scsicmd
->device
== scsidev
)
835 status
= scsicmd
->SCp
.Status
;
840 /* Local Structure to set SCSI inquiry data strings */
842 char vid
[8]; /* Vendor ID */
843 char pid
[16]; /* Product ID */
844 char prl
[4]; /* Product Revision Level */
848 * InqStrCopy - string merge
849 * @a: string to copy from
850 * @b: string to copy to
852 * Copy a String from one location to another
856 static void inqstrcpy(char *a
, char *b
)
859 while (*a
!= (char)0)
863 static char *container_types
[] = {
887 char * get_container_type(unsigned tindex
)
889 if (tindex
>= ARRAY_SIZE(container_types
))
890 tindex
= ARRAY_SIZE(container_types
) - 1;
891 return container_types
[tindex
];
894 /* Function: setinqstr
896 * Arguments: [1] pointer to void [1] int
898 * Purpose: Sets SCSI inquiry data strings for vendor, product
899 * and revision level. Allows strings to be set in platform dependent
900 * files instead of in OS dependent driver source.
903 static void setinqstr(struct aac_dev
*dev
, void *data
, int tindex
)
905 struct scsi_inq
*str
;
906 struct aac_supplement_adapter_info
*sup_adap_info
;
908 sup_adap_info
= &dev
->supplement_adapter_info
;
909 str
= (struct scsi_inq
*)(data
); /* cast data to scsi inq block */
910 memset(str
, ' ', sizeof(*str
));
912 if (sup_adap_info
->adapter_type_text
[0]) {
913 char *cp
= sup_adap_info
->adapter_type_text
;
915 if ((cp
[0] == 'A') && (cp
[1] == 'O') && (cp
[2] == 'C'))
916 inqstrcpy("SMC", str
->vid
);
918 c
= sizeof(str
->vid
);
919 while (*cp
&& *cp
!= ' ' && --c
)
923 inqstrcpy(sup_adap_info
->adapter_type_text
, str
->vid
);
925 while (*cp
&& *cp
!= ' ')
930 /* last six chars reserved for vol type */
932 if (strlen(cp
) > sizeof(str
->pid
)) {
933 c
= cp
[sizeof(str
->pid
)];
934 cp
[sizeof(str
->pid
)] = '\0';
936 inqstrcpy (cp
, str
->pid
);
938 cp
[sizeof(str
->pid
)] = c
;
940 struct aac_driver_ident
*mp
= aac_get_driver_ident(dev
->cardtype
);
942 inqstrcpy (mp
->vname
, str
->vid
);
943 /* last six chars reserved for vol type */
944 inqstrcpy (mp
->model
, str
->pid
);
947 if (tindex
< ARRAY_SIZE(container_types
)){
948 char *findit
= str
->pid
;
950 for ( ; *findit
!= ' '; findit
++); /* walk till we find a space */
951 /* RAID is superfluous in the context of a RAID device */
952 if (memcmp(findit
-4, "RAID", 4) == 0)
953 *(findit
-= 4) = ' ';
954 if (((findit
- str
->pid
) + strlen(container_types
[tindex
]))
955 < (sizeof(str
->pid
) + sizeof(str
->prl
)))
956 inqstrcpy (container_types
[tindex
], findit
+ 1);
958 inqstrcpy ("V1.0", str
->prl
);
961 static void build_vpd83_type3(struct tvpd_page83
*vpdpage83data
,
962 struct aac_dev
*dev
, struct scsi_cmnd
*scsicmd
)
966 vpdpage83data
->type3
.codeset
= 1;
967 vpdpage83data
->type3
.identifiertype
= 3;
968 vpdpage83data
->type3
.identifierlength
= sizeof(vpdpage83data
->type3
)
971 for (container
= 0; container
< dev
->maximum_num_containers
;
974 if (scmd_id(scsicmd
) == container
) {
975 memcpy(vpdpage83data
->type3
.Identifier
,
976 dev
->fsa_dev
[container
].identifier
,
983 static void get_container_serial_callback(void *context
, struct fib
* fibptr
)
985 struct aac_get_serial_resp
* get_serial_reply
;
986 struct scsi_cmnd
* scsicmd
;
988 BUG_ON(fibptr
== NULL
);
990 scsicmd
= (struct scsi_cmnd
*) context
;
991 if (!aac_valid_context(scsicmd
, fibptr
))
994 get_serial_reply
= (struct aac_get_serial_resp
*) fib_data(fibptr
);
995 /* Failure is irrelevant, using default value instead */
996 if (le32_to_cpu(get_serial_reply
->status
) == CT_OK
) {
997 /*Check to see if it's for VPD 0x83 or 0x80 */
998 if (scsicmd
->cmnd
[2] == 0x83) {
999 /* vpd page 0x83 - Device Identification Page */
1000 struct aac_dev
*dev
;
1002 struct tvpd_page83 vpdpage83data
;
1004 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1006 memset(((u8
*)&vpdpage83data
), 0,
1007 sizeof(vpdpage83data
));
1009 /* DIRECT_ACCESS_DEVIC */
1010 vpdpage83data
.DeviceType
= 0;
1011 /* DEVICE_CONNECTED */
1012 vpdpage83data
.DeviceTypeQualifier
= 0;
1013 /* VPD_DEVICE_IDENTIFIERS */
1014 vpdpage83data
.PageCode
= 0x83;
1015 vpdpage83data
.reserved
= 0;
1016 vpdpage83data
.PageLength
=
1017 sizeof(vpdpage83data
.type1
) +
1018 sizeof(vpdpage83data
.type2
);
1020 /* VPD 83 Type 3 is not supported for ARC */
1021 if (dev
->sa_firmware
)
1022 vpdpage83data
.PageLength
+=
1023 sizeof(vpdpage83data
.type3
);
1025 /* T10 Vendor Identifier Field Format */
1026 /* VpdcodesetAscii */
1027 vpdpage83data
.type1
.codeset
= 2;
1028 /* VpdIdentifierTypeVendorId */
1029 vpdpage83data
.type1
.identifiertype
= 1;
1030 vpdpage83data
.type1
.identifierlength
=
1031 sizeof(vpdpage83data
.type1
) - 4;
1033 /* "ADAPTEC " for adaptec */
1034 memcpy(vpdpage83data
.type1
.venid
,
1036 sizeof(vpdpage83data
.type1
.venid
));
1037 memcpy(vpdpage83data
.type1
.productid
,
1040 vpdpage83data
.type1
.productid
));
1042 /* Convert to ascii based serial number.
1043 * The LSB is the the end.
1045 for (i
= 0; i
< 8; i
++) {
1047 (u8
)((get_serial_reply
->uid
>> ((7 - i
) * 4)) & 0xF);
1049 vpdpage83data
.type1
.serialnumber
[i
] =
1052 vpdpage83data
.type1
.serialnumber
[i
] =
1057 /* VpdCodeSetBinary */
1058 vpdpage83data
.type2
.codeset
= 1;
1059 /* VpdidentifiertypeEUI64 */
1060 vpdpage83data
.type2
.identifiertype
= 2;
1061 vpdpage83data
.type2
.identifierlength
=
1062 sizeof(vpdpage83data
.type2
) - 4;
1064 vpdpage83data
.type2
.eu64id
.venid
[0] = 0xD0;
1065 vpdpage83data
.type2
.eu64id
.venid
[1] = 0;
1066 vpdpage83data
.type2
.eu64id
.venid
[2] = 0;
1068 vpdpage83data
.type2
.eu64id
.Serial
=
1069 get_serial_reply
->uid
;
1070 vpdpage83data
.type2
.eu64id
.reserved
= 0;
1073 * VpdIdentifierTypeFCPHName
1074 * VPD 0x83 Type 3 not supported for ARC
1076 if (dev
->sa_firmware
) {
1077 build_vpd83_type3(&vpdpage83data
,
1081 /* Move the inquiry data to the response buffer. */
1082 scsi_sg_copy_from_buffer(scsicmd
, &vpdpage83data
,
1083 sizeof(vpdpage83data
));
1085 /* It must be for VPD 0x80 */
1088 sp
[0] = INQD_PDT_DA
;
1089 sp
[1] = scsicmd
->cmnd
[2];
1091 sp
[3] = snprintf(sp
+4, sizeof(sp
)-4, "%08X",
1092 le32_to_cpu(get_serial_reply
->uid
));
1093 scsi_sg_copy_from_buffer(scsicmd
, sp
,
1098 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1100 aac_fib_complete(fibptr
);
1101 scsicmd
->scsi_done(scsicmd
);
1105 * aac_get_container_serial - get container serial, none blocking.
1107 static int aac_get_container_serial(struct scsi_cmnd
* scsicmd
)
1110 struct aac_get_serial
*dinfo
;
1111 struct fib
* cmd_fibcontext
;
1112 struct aac_dev
* dev
;
1114 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1116 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
1118 aac_fib_init(cmd_fibcontext
);
1119 dinfo
= (struct aac_get_serial
*) fib_data(cmd_fibcontext
);
1121 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
1122 dinfo
->type
= cpu_to_le32(CT_CID_TO_32BITS_UID
);
1123 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
1125 status
= aac_fib_send(ContainerCommand
,
1127 sizeof(struct aac_get_serial_resp
),
1130 (fib_callback
) get_container_serial_callback
,
1134 * Check that the command queued to the controller
1136 if (status
== -EINPROGRESS
) {
1137 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1141 printk(KERN_WARNING
"aac_get_container_serial: aac_fib_send failed with status: %d.\n", status
);
1142 aac_fib_complete(cmd_fibcontext
);
1146 /* Function: setinqserial
1148 * Arguments: [1] pointer to void [1] int
1150 * Purpose: Sets SCSI Unit Serial number.
1151 * This is a fake. We should read a proper
1152 * serial number from the container. <SuSE>But
1153 * without docs it's quite hard to do it :-)
1154 * So this will have to do in the meantime.</SuSE>
1157 static int setinqserial(struct aac_dev
*dev
, void *data
, int cid
)
1160 * This breaks array migration.
1162 return snprintf((char *)(data
), sizeof(struct scsi_inq
) - 4, "%08X%02X",
1163 le32_to_cpu(dev
->adapter_info
.serial
[0]), cid
);
1166 static inline void set_sense(struct sense_data
*sense_data
, u8 sense_key
,
1167 u8 sense_code
, u8 a_sense_code
, u8 bit_pointer
, u16 field_pointer
)
1169 u8
*sense_buf
= (u8
*)sense_data
;
1170 /* Sense data valid, err code 70h */
1171 sense_buf
[0] = 0x70; /* No info field */
1172 sense_buf
[1] = 0; /* Segment number, always zero */
1174 sense_buf
[2] = sense_key
; /* Sense key */
1176 sense_buf
[12] = sense_code
; /* Additional sense code */
1177 sense_buf
[13] = a_sense_code
; /* Additional sense code qualifier */
1179 if (sense_key
== ILLEGAL_REQUEST
) {
1180 sense_buf
[7] = 10; /* Additional sense length */
1182 sense_buf
[15] = bit_pointer
;
1183 /* Illegal parameter is in the parameter block */
1184 if (sense_code
== SENCODE_INVALID_CDB_FIELD
)
1185 sense_buf
[15] |= 0xc0;/* Std sense key specific field */
1186 /* Illegal parameter is in the CDB block */
1187 sense_buf
[16] = field_pointer
>> 8; /* MSB */
1188 sense_buf
[17] = field_pointer
; /* LSB */
1190 sense_buf
[7] = 6; /* Additional sense length */
1193 static int aac_bounds_32(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
1195 if (lba
& 0xffffffff00000000LL
) {
1196 int cid
= scmd_id(cmd
);
1197 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
1198 cmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
1199 SAM_STAT_CHECK_CONDITION
;
1200 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1201 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1202 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1203 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1204 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1205 SCSI_SENSE_BUFFERSIZE
));
1206 cmd
->scsi_done(cmd
);
1212 static int aac_bounds_64(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
1217 static void io_callback(void *context
, struct fib
* fibptr
);
1219 static int aac_read_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1221 struct aac_dev
*dev
= fib
->dev
;
1222 u16 fibsize
, command
;
1226 if ((dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE2
||
1227 dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE3
) &&
1229 struct aac_raw_io2
*readcmd2
;
1230 readcmd2
= (struct aac_raw_io2
*) fib_data(fib
);
1231 memset(readcmd2
, 0, sizeof(struct aac_raw_io2
));
1232 readcmd2
->blockLow
= cpu_to_le32((u32
)(lba
&0xffffffff));
1233 readcmd2
->blockHigh
= cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1234 readcmd2
->byteCount
= cpu_to_le32(count
*
1235 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1236 readcmd2
->cid
= cpu_to_le16(scmd_id(cmd
));
1237 readcmd2
->flags
= cpu_to_le16(RIO2_IO_TYPE_READ
);
1238 ret
= aac_build_sgraw2(cmd
, readcmd2
,
1239 dev
->scsi_host_ptr
->sg_tablesize
);
1242 command
= ContainerRawIo2
;
1243 fibsize
= sizeof(struct aac_raw_io2
) +
1244 ((le32_to_cpu(readcmd2
->sgeCnt
)-1) * sizeof(struct sge_ieee1212
));
1246 struct aac_raw_io
*readcmd
;
1247 readcmd
= (struct aac_raw_io
*) fib_data(fib
);
1248 readcmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1249 readcmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1250 readcmd
->count
= cpu_to_le32(count
*
1251 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1252 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1253 readcmd
->flags
= cpu_to_le16(RIO_TYPE_READ
);
1254 readcmd
->bpTotal
= 0;
1255 readcmd
->bpComplete
= 0;
1256 ret
= aac_build_sgraw(cmd
, &readcmd
->sg
);
1259 command
= ContainerRawIo
;
1260 fibsize
= sizeof(struct aac_raw_io
) +
1261 ((le32_to_cpu(readcmd
->sg
.count
)-1) * sizeof(struct sgentryraw
));
1264 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1266 * Now send the Fib to the adapter
1268 return aac_fib_send(command
,
1273 (fib_callback
) io_callback
,
1277 static int aac_read_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1280 struct aac_read64
*readcmd
;
1284 readcmd
= (struct aac_read64
*) fib_data(fib
);
1285 readcmd
->command
= cpu_to_le32(VM_CtHostRead64
);
1286 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1287 readcmd
->sector_count
= cpu_to_le16(count
);
1288 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1292 ret
= aac_build_sg64(cmd
, &readcmd
->sg
);
1295 fibsize
= sizeof(struct aac_read64
) +
1296 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
1297 sizeof (struct sgentry64
));
1298 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1299 sizeof(struct aac_fibhdr
)));
1301 * Now send the Fib to the adapter
1303 return aac_fib_send(ContainerCommand64
,
1308 (fib_callback
) io_callback
,
1312 static int aac_read_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1315 struct aac_read
*readcmd
;
1316 struct aac_dev
*dev
= fib
->dev
;
1320 readcmd
= (struct aac_read
*) fib_data(fib
);
1321 readcmd
->command
= cpu_to_le32(VM_CtBlockRead
);
1322 readcmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1323 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1324 readcmd
->count
= cpu_to_le32(count
*
1325 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1327 ret
= aac_build_sg(cmd
, &readcmd
->sg
);
1330 fibsize
= sizeof(struct aac_read
) +
1331 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
1332 sizeof (struct sgentry
));
1333 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1334 sizeof(struct aac_fibhdr
)));
1336 * Now send the Fib to the adapter
1338 return aac_fib_send(ContainerCommand
,
1343 (fib_callback
) io_callback
,
1347 static int aac_write_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1349 struct aac_dev
*dev
= fib
->dev
;
1350 u16 fibsize
, command
;
1354 if ((dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE2
||
1355 dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE3
) &&
1357 struct aac_raw_io2
*writecmd2
;
1358 writecmd2
= (struct aac_raw_io2
*) fib_data(fib
);
1359 memset(writecmd2
, 0, sizeof(struct aac_raw_io2
));
1360 writecmd2
->blockLow
= cpu_to_le32((u32
)(lba
&0xffffffff));
1361 writecmd2
->blockHigh
= cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1362 writecmd2
->byteCount
= cpu_to_le32(count
*
1363 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1364 writecmd2
->cid
= cpu_to_le16(scmd_id(cmd
));
1365 writecmd2
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1366 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1367 cpu_to_le16(RIO2_IO_TYPE_WRITE
|RIO2_IO_SUREWRITE
) :
1368 cpu_to_le16(RIO2_IO_TYPE_WRITE
);
1369 ret
= aac_build_sgraw2(cmd
, writecmd2
,
1370 dev
->scsi_host_ptr
->sg_tablesize
);
1373 command
= ContainerRawIo2
;
1374 fibsize
= sizeof(struct aac_raw_io2
) +
1375 ((le32_to_cpu(writecmd2
->sgeCnt
)-1) * sizeof(struct sge_ieee1212
));
1377 struct aac_raw_io
*writecmd
;
1378 writecmd
= (struct aac_raw_io
*) fib_data(fib
);
1379 writecmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1380 writecmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1381 writecmd
->count
= cpu_to_le32(count
*
1382 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1383 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1384 writecmd
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1385 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1386 cpu_to_le16(RIO_TYPE_WRITE
|RIO_SUREWRITE
) :
1387 cpu_to_le16(RIO_TYPE_WRITE
);
1388 writecmd
->bpTotal
= 0;
1389 writecmd
->bpComplete
= 0;
1390 ret
= aac_build_sgraw(cmd
, &writecmd
->sg
);
1393 command
= ContainerRawIo
;
1394 fibsize
= sizeof(struct aac_raw_io
) +
1395 ((le32_to_cpu(writecmd
->sg
.count
)-1) * sizeof (struct sgentryraw
));
1398 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1400 * Now send the Fib to the adapter
1402 return aac_fib_send(command
,
1407 (fib_callback
) io_callback
,
1411 static int aac_write_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1414 struct aac_write64
*writecmd
;
1418 writecmd
= (struct aac_write64
*) fib_data(fib
);
1419 writecmd
->command
= cpu_to_le32(VM_CtHostWrite64
);
1420 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1421 writecmd
->sector_count
= cpu_to_le16(count
);
1422 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1424 writecmd
->flags
= 0;
1426 ret
= aac_build_sg64(cmd
, &writecmd
->sg
);
1429 fibsize
= sizeof(struct aac_write64
) +
1430 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1431 sizeof (struct sgentry64
));
1432 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1433 sizeof(struct aac_fibhdr
)));
1435 * Now send the Fib to the adapter
1437 return aac_fib_send(ContainerCommand64
,
1442 (fib_callback
) io_callback
,
1446 static int aac_write_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1449 struct aac_write
*writecmd
;
1450 struct aac_dev
*dev
= fib
->dev
;
1454 writecmd
= (struct aac_write
*) fib_data(fib
);
1455 writecmd
->command
= cpu_to_le32(VM_CtBlockWrite
);
1456 writecmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1457 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1458 writecmd
->count
= cpu_to_le32(count
*
1459 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1460 writecmd
->sg
.count
= cpu_to_le32(1);
1461 /* ->stable is not used - it did mean which type of write */
1463 ret
= aac_build_sg(cmd
, &writecmd
->sg
);
1466 fibsize
= sizeof(struct aac_write
) +
1467 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1468 sizeof (struct sgentry
));
1469 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1470 sizeof(struct aac_fibhdr
)));
1472 * Now send the Fib to the adapter
1474 return aac_fib_send(ContainerCommand
,
1479 (fib_callback
) io_callback
,
1483 static struct aac_srb
* aac_scsi_common(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1485 struct aac_srb
* srbcmd
;
1490 switch(cmd
->sc_data_direction
){
1494 case DMA_BIDIRECTIONAL
:
1495 flag
= SRB_DataIn
| SRB_DataOut
;
1497 case DMA_FROM_DEVICE
:
1501 default: /* shuts up some versions of gcc */
1502 flag
= SRB_NoDataXfer
;
1506 srbcmd
= (struct aac_srb
*) fib_data(fib
);
1507 srbcmd
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1508 srbcmd
->channel
= cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd
)));
1509 srbcmd
->id
= cpu_to_le32(scmd_id(cmd
));
1510 srbcmd
->lun
= cpu_to_le32(cmd
->device
->lun
);
1511 srbcmd
->flags
= cpu_to_le32(flag
);
1512 timeout
= cmd
->request
->timeout
/HZ
;
1515 srbcmd
->timeout
= cpu_to_le32(timeout
); // timeout in seconds
1516 srbcmd
->retry_limit
= 0; /* Obsolete parameter */
1517 srbcmd
->cdb_size
= cpu_to_le32(cmd
->cmd_len
);
1521 static struct aac_hba_cmd_req
*aac_construct_hbacmd(struct fib
*fib
,
1522 struct scsi_cmnd
*cmd
)
1524 struct aac_hba_cmd_req
*hbacmd
;
1525 struct aac_dev
*dev
;
1529 dev
= (struct aac_dev
*)cmd
->device
->host
->hostdata
;
1531 hbacmd
= (struct aac_hba_cmd_req
*)fib
->hw_fib_va
;
1532 memset(hbacmd
, 0, 96); /* sizeof(*hbacmd) is not necessary */
1533 /* iu_type is a parameter of aac_hba_send */
1534 switch (cmd
->sc_data_direction
) {
1538 case DMA_FROM_DEVICE
:
1539 case DMA_BIDIRECTIONAL
:
1546 hbacmd
->lun
[1] = cpu_to_le32(cmd
->device
->lun
);
1548 bus
= aac_logical_to_phys(scmd_channel(cmd
));
1549 target
= scmd_id(cmd
);
1550 hbacmd
->it_nexus
= dev
->hba_map
[bus
][target
].rmw_nexus
;
1552 /* we fill in reply_qid later in aac_src_deliver_message */
1553 /* we fill in iu_type, request_id later in aac_hba_send */
1554 /* we fill in emb_data_desc_count later in aac_build_sghba */
1556 memcpy(hbacmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1557 hbacmd
->data_length
= cpu_to_le32(scsi_bufflen(cmd
));
1559 address
= (u64
)fib
->hw_error_pa
;
1560 hbacmd
->error_ptr_hi
= cpu_to_le32((u32
)(address
>> 32));
1561 hbacmd
->error_ptr_lo
= cpu_to_le32((u32
)(address
& 0xffffffff));
1562 hbacmd
->error_length
= cpu_to_le32(FW_ERROR_BUFFER_SIZE
);
1567 static void aac_srb_callback(void *context
, struct fib
* fibptr
);
1569 static int aac_scsi_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1572 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1575 ret
= aac_build_sg64(cmd
, (struct sgmap64
*) &srbcmd
->sg
);
1578 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1580 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1581 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1583 * Build Scatter/Gather list
1585 fibsize
= sizeof (struct aac_srb
) - sizeof (struct sgentry
) +
1586 ((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) *
1587 sizeof (struct sgentry64
));
1588 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1589 sizeof(struct aac_fibhdr
)));
1592 * Now send the Fib to the adapter
1594 return aac_fib_send(ScsiPortCommand64
, fib
,
1595 fibsize
, FsaNormal
, 0, 1,
1596 (fib_callback
) aac_srb_callback
,
1600 static int aac_scsi_32(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1603 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1606 ret
= aac_build_sg(cmd
, (struct sgmap
*)&srbcmd
->sg
);
1609 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1611 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1612 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1614 * Build Scatter/Gather list
1616 fibsize
= sizeof (struct aac_srb
) +
1617 (((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) - 1) *
1618 sizeof (struct sgentry
));
1619 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1620 sizeof(struct aac_fibhdr
)));
1623 * Now send the Fib to the adapter
1625 return aac_fib_send(ScsiPortCommand
, fib
, fibsize
, FsaNormal
, 0, 1,
1626 (fib_callback
) aac_srb_callback
, (void *) cmd
);
1629 static int aac_scsi_32_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1631 if ((sizeof(dma_addr_t
) > 4) && fib
->dev
->needs_dac
&&
1632 (fib
->dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
))
1634 return aac_scsi_32(fib
, cmd
);
1637 static int aac_adapter_hba(struct fib
*fib
, struct scsi_cmnd
*cmd
)
1639 struct aac_hba_cmd_req
*hbacmd
= aac_construct_hbacmd(fib
, cmd
);
1640 struct aac_dev
*dev
;
1643 dev
= (struct aac_dev
*)cmd
->device
->host
->hostdata
;
1645 ret
= aac_build_sghba(cmd
, hbacmd
,
1646 dev
->scsi_host_ptr
->sg_tablesize
, (u64
)fib
->hw_sgl_pa
);
1651 * Now send the HBA command to the adapter
1653 fib
->hbacmd_size
= 64 + le32_to_cpu(hbacmd
->emb_data_desc_count
) *
1654 sizeof(struct aac_hba_sgl
);
1656 return aac_hba_send(HBA_IU_TYPE_SCSI_CMD_REQ
, fib
,
1657 (fib_callback
) aac_hba_callback
,
1661 int aac_issue_bmic_identify(struct aac_dev
*dev
, u32 bus
, u32 target
)
1664 struct aac_srb
*srbcmd
;
1665 struct sgmap64
*sg64
;
1666 struct aac_ciss_identify_pd
*identify_resp
;
1669 u16 fibsize
, datasize
;
1670 int rcode
= -ENOMEM
;
1673 fibptr
= aac_fib_alloc(dev
);
1677 fibsize
= sizeof(struct aac_srb
) -
1678 sizeof(struct sgentry
) + sizeof(struct sgentry64
);
1679 datasize
= sizeof(struct aac_ciss_identify_pd
);
1681 identify_resp
= dma_alloc_coherent(&dev
->pdev
->dev
, datasize
, &addr
,
1686 vbus
= (u32
)le16_to_cpu(dev
->supplement_adapter_info
.virt_device_bus
);
1687 vid
= (u32
)le16_to_cpu(dev
->supplement_adapter_info
.virt_device_target
);
1689 aac_fib_init(fibptr
);
1691 srbcmd
= (struct aac_srb
*) fib_data(fibptr
);
1692 srbcmd
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1693 srbcmd
->channel
= cpu_to_le32(vbus
);
1694 srbcmd
->id
= cpu_to_le32(vid
);
1696 srbcmd
->flags
= cpu_to_le32(SRB_DataIn
);
1697 srbcmd
->timeout
= cpu_to_le32(10);
1698 srbcmd
->retry_limit
= 0;
1699 srbcmd
->cdb_size
= cpu_to_le32(12);
1700 srbcmd
->count
= cpu_to_le32(datasize
);
1702 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1703 srbcmd
->cdb
[0] = 0x26;
1704 srbcmd
->cdb
[2] = (u8
)((AAC_MAX_LUN
+ target
) & 0x00FF);
1705 srbcmd
->cdb
[6] = CISS_IDENTIFY_PHYSICAL_DEVICE
;
1707 sg64
= (struct sgmap64
*)&srbcmd
->sg
;
1708 sg64
->count
= cpu_to_le32(1);
1709 sg64
->sg
[0].addr
[1] = cpu_to_le32((u32
)(((addr
) >> 16) >> 16));
1710 sg64
->sg
[0].addr
[0] = cpu_to_le32((u32
)(addr
& 0xffffffff));
1711 sg64
->sg
[0].count
= cpu_to_le32(datasize
);
1713 rcode
= aac_fib_send(ScsiPortCommand64
,
1714 fibptr
, fibsize
, FsaNormal
, 1, 1, NULL
, NULL
);
1716 if (identify_resp
->current_queue_depth_limit
<= 0 ||
1717 identify_resp
->current_queue_depth_limit
> 32)
1718 dev
->hba_map
[bus
][target
].qd_limit
= 32;
1720 dev
->hba_map
[bus
][target
].qd_limit
=
1721 identify_resp
->current_queue_depth_limit
;
1723 dma_free_coherent(&dev
->pdev
->dev
, datasize
, identify_resp
, addr
);
1725 aac_fib_complete(fibptr
);
1728 aac_fib_free(fibptr
);
1734 * aac_update hba_map()- update current hba map with data from FW
1735 * @dev: aac_dev structure
1736 * @phys_luns: FW information from report phys luns
1738 * Update our hba map with the information gathered from the FW
1740 void aac_update_hba_map(struct aac_dev
*dev
,
1741 struct aac_ciss_phys_luns_resp
*phys_luns
, int rescan
)
1743 /* ok and extended reporting */
1744 u32 lun_count
, nexus
;
1746 u8 expose_flag
, attribs
;
1749 lun_count
= ((phys_luns
->list_length
[0] << 24)
1750 + (phys_luns
->list_length
[1] << 16)
1751 + (phys_luns
->list_length
[2] << 8)
1752 + (phys_luns
->list_length
[3])) / 24;
1754 for (i
= 0; i
< lun_count
; ++i
) {
1756 bus
= phys_luns
->lun
[i
].level2
[1] & 0x3f;
1757 target
= phys_luns
->lun
[i
].level2
[0];
1758 expose_flag
= phys_luns
->lun
[i
].bus
>> 6;
1759 attribs
= phys_luns
->lun
[i
].node_ident
[9];
1760 nexus
= *((u32
*) &phys_luns
->lun
[i
].node_ident
[12]);
1762 if (bus
>= AAC_MAX_BUSES
|| target
>= AAC_MAX_TARGETS
)
1765 dev
->hba_map
[bus
][target
].expose
= expose_flag
;
1767 if (expose_flag
!= 0) {
1768 devtype
= AAC_DEVTYPE_RAID_MEMBER
;
1769 goto update_devtype
;
1772 if (nexus
!= 0 && (attribs
& 8)) {
1773 devtype
= AAC_DEVTYPE_NATIVE_RAW
;
1774 dev
->hba_map
[bus
][target
].rmw_nexus
=
1777 devtype
= AAC_DEVTYPE_ARC_RAW
;
1779 if (devtype
!= AAC_DEVTYPE_NATIVE_RAW
)
1780 goto update_devtype
;
1782 if (aac_issue_bmic_identify(dev
, bus
, target
) < 0)
1783 dev
->hba_map
[bus
][target
].qd_limit
= 32;
1786 if (rescan
== AAC_INIT
)
1787 dev
->hba_map
[bus
][target
].devtype
= devtype
;
1789 dev
->hba_map
[bus
][target
].new_devtype
= devtype
;
1794 * aac_report_phys_luns() Process topology change
1795 * @dev: aac_dev structure
1796 * @fibptr: fib pointer
1798 * Execute a CISS REPORT PHYS LUNS and process the results into
1799 * the current hba_map.
1801 int aac_report_phys_luns(struct aac_dev
*dev
, struct fib
*fibptr
, int rescan
)
1803 int fibsize
, datasize
;
1804 struct aac_ciss_phys_luns_resp
*phys_luns
;
1805 struct aac_srb
*srbcmd
;
1806 struct sgmap64
*sg64
;
1811 /* Thor SA Firmware -> CISS_REPORT_PHYSICAL_LUNS */
1812 fibsize
= sizeof(struct aac_srb
) - sizeof(struct sgentry
)
1813 + sizeof(struct sgentry64
);
1814 datasize
= sizeof(struct aac_ciss_phys_luns_resp
)
1815 + (AAC_MAX_TARGETS
- 1) * sizeof(struct _ciss_lun
);
1817 phys_luns
= dma_alloc_coherent(&dev
->pdev
->dev
, datasize
, &addr
,
1819 if (phys_luns
== NULL
) {
1824 vbus
= (u32
) le16_to_cpu(
1825 dev
->supplement_adapter_info
.virt_device_bus
);
1826 vid
= (u32
) le16_to_cpu(
1827 dev
->supplement_adapter_info
.virt_device_target
);
1829 aac_fib_init(fibptr
);
1831 srbcmd
= (struct aac_srb
*) fib_data(fibptr
);
1832 srbcmd
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1833 srbcmd
->channel
= cpu_to_le32(vbus
);
1834 srbcmd
->id
= cpu_to_le32(vid
);
1836 srbcmd
->flags
= cpu_to_le32(SRB_DataIn
);
1837 srbcmd
->timeout
= cpu_to_le32(10);
1838 srbcmd
->retry_limit
= 0;
1839 srbcmd
->cdb_size
= cpu_to_le32(12);
1840 srbcmd
->count
= cpu_to_le32(datasize
);
1842 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1843 srbcmd
->cdb
[0] = CISS_REPORT_PHYSICAL_LUNS
;
1844 srbcmd
->cdb
[1] = 2; /* extended reporting */
1845 srbcmd
->cdb
[8] = (u8
)(datasize
>> 8);
1846 srbcmd
->cdb
[9] = (u8
)(datasize
);
1848 sg64
= (struct sgmap64
*) &srbcmd
->sg
;
1849 sg64
->count
= cpu_to_le32(1);
1850 sg64
->sg
[0].addr
[1] = cpu_to_le32(upper_32_bits(addr
));
1851 sg64
->sg
[0].addr
[0] = cpu_to_le32(lower_32_bits(addr
));
1852 sg64
->sg
[0].count
= cpu_to_le32(datasize
);
1854 rcode
= aac_fib_send(ScsiPortCommand64
, fibptr
, fibsize
,
1855 FsaNormal
, 1, 1, NULL
, NULL
);
1858 if (rcode
>= 0 && phys_luns
->resp_flag
== 2) {
1859 /* ok and extended reporting */
1860 aac_update_hba_map(dev
, phys_luns
, rescan
);
1863 dma_free_coherent(&dev
->pdev
->dev
, datasize
, phys_luns
, addr
);
1868 int aac_get_adapter_info(struct aac_dev
* dev
)
1872 u32 tmp
, bus
, target
;
1873 struct aac_adapter_info
*info
;
1874 struct aac_bus_info
*command
;
1875 struct aac_bus_info_response
*bus_info
;
1877 if (!(fibptr
= aac_fib_alloc(dev
)))
1880 aac_fib_init(fibptr
);
1881 info
= (struct aac_adapter_info
*) fib_data(fibptr
);
1882 memset(info
,0,sizeof(*info
));
1884 rcode
= aac_fib_send(RequestAdapterInfo
,
1888 -1, 1, /* First `interrupt' command uses special wait */
1893 /* FIB should be freed only after
1894 * getting the response from the F/W */
1895 if (rcode
!= -ERESTARTSYS
) {
1896 aac_fib_complete(fibptr
);
1897 aac_fib_free(fibptr
);
1901 memcpy(&dev
->adapter_info
, info
, sizeof(*info
));
1903 dev
->supplement_adapter_info
.virt_device_bus
= 0xffff;
1904 if (dev
->adapter_info
.options
& AAC_OPT_SUPPLEMENT_ADAPTER_INFO
) {
1905 struct aac_supplement_adapter_info
* sinfo
;
1907 aac_fib_init(fibptr
);
1909 sinfo
= (struct aac_supplement_adapter_info
*) fib_data(fibptr
);
1911 memset(sinfo
,0,sizeof(*sinfo
));
1913 rcode
= aac_fib_send(RequestSupplementAdapterInfo
,
1922 memcpy(&dev
->supplement_adapter_info
, sinfo
, sizeof(*sinfo
));
1923 if (rcode
== -ERESTARTSYS
) {
1924 fibptr
= aac_fib_alloc(dev
);
1931 /* reset all previous mapped devices (i.e. for init. after IOP_RESET) */
1932 for (bus
= 0; bus
< AAC_MAX_BUSES
; bus
++) {
1933 for (target
= 0; target
< AAC_MAX_TARGETS
; target
++) {
1934 dev
->hba_map
[bus
][target
].devtype
= 0;
1935 dev
->hba_map
[bus
][target
].qd_limit
= 0;
1943 aac_fib_init(fibptr
);
1945 bus_info
= (struct aac_bus_info_response
*) fib_data(fibptr
);
1947 memset(bus_info
, 0, sizeof(*bus_info
));
1949 command
= (struct aac_bus_info
*)bus_info
;
1951 command
->Command
= cpu_to_le32(VM_Ioctl
);
1952 command
->ObjType
= cpu_to_le32(FT_DRIVE
);
1953 command
->MethodId
= cpu_to_le32(1);
1954 command
->CtlCmd
= cpu_to_le32(GetBusInfo
);
1956 rcode
= aac_fib_send(ContainerCommand
,
1963 /* reasoned default */
1964 dev
->maximum_num_physicals
= 16;
1965 if (rcode
>= 0 && le32_to_cpu(bus_info
->Status
) == ST_OK
) {
1966 dev
->maximum_num_physicals
= le32_to_cpu(bus_info
->TargetsPerBus
);
1967 dev
->maximum_num_channels
= le32_to_cpu(bus_info
->BusCount
);
1970 if (!dev
->sync_mode
&& dev
->sa_firmware
&&
1971 dev
->supplement_adapter_info
.virt_device_bus
!= 0xffff) {
1972 /* Thor SA Firmware -> CISS_REPORT_PHYSICAL_LUNS */
1973 rcode
= aac_report_phys_luns(dev
, fibptr
, AAC_INIT
);
1976 if (!dev
->in_reset
) {
1978 tmp
= le32_to_cpu(dev
->adapter_info
.kernelrev
);
1979 printk(KERN_INFO
"%s%d: kernel %d.%d-%d[%d] %.*s\n",
1985 le32_to_cpu(dev
->adapter_info
.kernelbuild
),
1986 (int)sizeof(dev
->supplement_adapter_info
.build_date
),
1987 dev
->supplement_adapter_info
.build_date
);
1988 tmp
= le32_to_cpu(dev
->adapter_info
.monitorrev
);
1989 printk(KERN_INFO
"%s%d: monitor %d.%d-%d[%d]\n",
1991 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
1992 le32_to_cpu(dev
->adapter_info
.monitorbuild
));
1993 tmp
= le32_to_cpu(dev
->adapter_info
.biosrev
);
1994 printk(KERN_INFO
"%s%d: bios %d.%d-%d[%d]\n",
1996 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
1997 le32_to_cpu(dev
->adapter_info
.biosbuild
));
1999 if (aac_get_serial_number(
2000 shost_to_class(dev
->scsi_host_ptr
), buffer
))
2001 printk(KERN_INFO
"%s%d: serial %s",
2002 dev
->name
, dev
->id
, buffer
);
2003 if (dev
->supplement_adapter_info
.vpd_info
.tsid
[0]) {
2004 printk(KERN_INFO
"%s%d: TSID %.*s\n",
2006 (int)sizeof(dev
->supplement_adapter_info
2008 dev
->supplement_adapter_info
.vpd_info
.tsid
);
2010 if (!aac_check_reset
|| ((aac_check_reset
== 1) &&
2011 (dev
->supplement_adapter_info
.supported_options2
&
2012 AAC_OPTION_IGNORE_RESET
))) {
2013 printk(KERN_INFO
"%s%d: Reset Adapter Ignored\n",
2014 dev
->name
, dev
->id
);
2018 dev
->cache_protected
= 0;
2019 dev
->jbod
= ((dev
->supplement_adapter_info
.feature_bits
&
2020 AAC_FEATURE_JBOD
) != 0);
2021 dev
->nondasd_support
= 0;
2022 dev
->raid_scsi_mode
= 0;
2023 if(dev
->adapter_info
.options
& AAC_OPT_NONDASD
)
2024 dev
->nondasd_support
= 1;
2027 * If the firmware supports ROMB RAID/SCSI mode and we are currently
2028 * in RAID/SCSI mode, set the flag. For now if in this mode we will
2029 * force nondasd support on. If we decide to allow the non-dasd flag
2030 * additional changes changes will have to be made to support
2031 * RAID/SCSI. the function aac_scsi_cmd in this module will have to be
2032 * changed to support the new dev->raid_scsi_mode flag instead of
2033 * leaching off of the dev->nondasd_support flag. Also in linit.c the
2034 * function aac_detect will have to be modified where it sets up the
2035 * max number of channels based on the aac->nondasd_support flag only.
2037 if ((dev
->adapter_info
.options
& AAC_OPT_SCSI_MANAGED
) &&
2038 (dev
->adapter_info
.options
& AAC_OPT_RAID_SCSI_MODE
)) {
2039 dev
->nondasd_support
= 1;
2040 dev
->raid_scsi_mode
= 1;
2042 if (dev
->raid_scsi_mode
!= 0)
2043 printk(KERN_INFO
"%s%d: ROMB RAID/SCSI mode enabled\n",
2044 dev
->name
, dev
->id
);
2047 dev
->nondasd_support
= (nondasd
!=0);
2048 if (dev
->nondasd_support
&& !dev
->in_reset
)
2049 printk(KERN_INFO
"%s%d: Non-DASD support enabled.\n",dev
->name
, dev
->id
);
2051 if (dma_get_required_mask(&dev
->pdev
->dev
) > DMA_BIT_MASK(32))
2053 dev
->dac_support
= 0;
2054 if ((sizeof(dma_addr_t
) > 4) && dev
->needs_dac
&&
2055 (dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
)) {
2057 printk(KERN_INFO
"%s%d: 64bit support enabled.\n",
2058 dev
->name
, dev
->id
);
2059 dev
->dac_support
= 1;
2063 dev
->dac_support
= (dacmode
!=0);
2066 /* avoid problems with AAC_QUIRK_SCSI_32 controllers */
2067 if (dev
->dac_support
&& (aac_get_driver_ident(dev
->cardtype
)->quirks
2068 & AAC_QUIRK_SCSI_32
)) {
2069 dev
->nondasd_support
= 0;
2071 expose_physicals
= 0;
2074 if (dev
->dac_support
) {
2075 if (!pci_set_dma_mask(dev
->pdev
, DMA_BIT_MASK(64))) {
2077 dev_info(&dev
->pdev
->dev
, "64 Bit DAC enabled\n");
2078 } else if (!pci_set_dma_mask(dev
->pdev
, DMA_BIT_MASK(32))) {
2079 dev_info(&dev
->pdev
->dev
, "DMA mask set failed, 64 Bit DAC disabled\n");
2080 dev
->dac_support
= 0;
2082 dev_info(&dev
->pdev
->dev
, "No suitable DMA available\n");
2087 * Deal with configuring for the individualized limits of each packet
2090 dev
->a_ops
.adapter_scsi
= (dev
->dac_support
)
2091 ? ((aac_get_driver_ident(dev
->cardtype
)->quirks
& AAC_QUIRK_SCSI_32
)
2095 if (dev
->raw_io_interface
) {
2096 dev
->a_ops
.adapter_bounds
= (dev
->raw_io_64
)
2099 dev
->a_ops
.adapter_read
= aac_read_raw_io
;
2100 dev
->a_ops
.adapter_write
= aac_write_raw_io
;
2102 dev
->a_ops
.adapter_bounds
= aac_bounds_32
;
2103 dev
->scsi_host_ptr
->sg_tablesize
= (dev
->max_fib_size
-
2104 sizeof(struct aac_fibhdr
) -
2105 sizeof(struct aac_write
) + sizeof(struct sgentry
)) /
2106 sizeof(struct sgentry
);
2107 if (dev
->dac_support
) {
2108 dev
->a_ops
.adapter_read
= aac_read_block64
;
2109 dev
->a_ops
.adapter_write
= aac_write_block64
;
2111 * 38 scatter gather elements
2113 dev
->scsi_host_ptr
->sg_tablesize
=
2114 (dev
->max_fib_size
-
2115 sizeof(struct aac_fibhdr
) -
2116 sizeof(struct aac_write64
) +
2117 sizeof(struct sgentry64
)) /
2118 sizeof(struct sgentry64
);
2120 dev
->a_ops
.adapter_read
= aac_read_block
;
2121 dev
->a_ops
.adapter_write
= aac_write_block
;
2123 dev
->scsi_host_ptr
->max_sectors
= AAC_MAX_32BIT_SGBCOUNT
;
2124 if (!(dev
->adapter_info
.options
& AAC_OPT_NEW_COMM
)) {
2126 * Worst case size that could cause sg overflow when
2127 * we break up SG elements that are larger than 64KB.
2128 * Would be nice if we could tell the SCSI layer what
2129 * the maximum SG element size can be. Worst case is
2130 * (sg_tablesize-1) 4KB elements with one 64KB
2132 * 32bit -> 468 or 238KB 64bit -> 424 or 212KB
2134 dev
->scsi_host_ptr
->max_sectors
=
2135 (dev
->scsi_host_ptr
->sg_tablesize
* 8) + 112;
2138 if (!dev
->sync_mode
&& dev
->sa_firmware
&&
2139 dev
->scsi_host_ptr
->sg_tablesize
> HBA_MAX_SG_SEPARATE
)
2140 dev
->scsi_host_ptr
->sg_tablesize
= dev
->sg_tablesize
=
2141 HBA_MAX_SG_SEPARATE
;
2143 /* FIB should be freed only after getting the response from the F/W */
2144 if (rcode
!= -ERESTARTSYS
) {
2145 aac_fib_complete(fibptr
);
2146 aac_fib_free(fibptr
);
2153 static void io_callback(void *context
, struct fib
* fibptr
)
2155 struct aac_dev
*dev
;
2156 struct aac_read_reply
*readreply
;
2157 struct scsi_cmnd
*scsicmd
;
2160 scsicmd
= (struct scsi_cmnd
*) context
;
2162 if (!aac_valid_context(scsicmd
, fibptr
))
2166 cid
= scmd_id(scsicmd
);
2168 if (nblank(dprintk(x
))) {
2170 switch (scsicmd
->cmnd
[0]) {
2173 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
2174 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2178 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2179 ((u64
)scsicmd
->cmnd
[3] << 48) |
2180 ((u64
)scsicmd
->cmnd
[4] << 40) |
2181 ((u64
)scsicmd
->cmnd
[5] << 32) |
2182 ((u64
)scsicmd
->cmnd
[6] << 24) |
2183 (scsicmd
->cmnd
[7] << 16) |
2184 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2188 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2189 (scsicmd
->cmnd
[3] << 16) |
2190 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2193 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2194 (scsicmd
->cmnd
[3] << 16) |
2195 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2199 "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
2200 smp_processor_id(), (unsigned long long)lba
, jiffies
);
2203 BUG_ON(fibptr
== NULL
);
2205 scsi_dma_unmap(scsicmd
);
2207 readreply
= (struct aac_read_reply
*)fib_data(fibptr
);
2208 switch (le32_to_cpu(readreply
->status
)) {
2210 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2212 dev
->fsa_dev
[cid
].sense_data
.sense_key
= NO_SENSE
;
2215 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2216 SAM_STAT_CHECK_CONDITION
;
2217 set_sense(&dev
->fsa_dev
[cid
].sense_data
, NOT_READY
,
2218 SENCODE_BECOMING_READY
, ASENCODE_BECOMING_READY
, 0, 0);
2219 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2220 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2221 SCSI_SENSE_BUFFERSIZE
));
2224 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2225 SAM_STAT_CHECK_CONDITION
;
2226 set_sense(&dev
->fsa_dev
[cid
].sense_data
, MEDIUM_ERROR
,
2227 SENCODE_UNRECOVERED_READ_ERROR
, ASENCODE_NO_SENSE
, 0, 0);
2228 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2229 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2230 SCSI_SENSE_BUFFERSIZE
));
2233 #ifdef AAC_DETAILED_STATUS_INFO
2234 printk(KERN_WARNING
"io_callback: io failed, status = %d\n",
2235 le32_to_cpu(readreply
->status
));
2237 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2238 SAM_STAT_CHECK_CONDITION
;
2239 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2240 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2241 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2242 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2243 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2244 SCSI_SENSE_BUFFERSIZE
));
2247 aac_fib_complete(fibptr
);
2249 scsicmd
->scsi_done(scsicmd
);
2252 static int aac_read(struct scsi_cmnd
* scsicmd
)
2257 struct aac_dev
*dev
;
2258 struct fib
* cmd_fibcontext
;
2261 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2263 * Get block address and transfer length
2265 switch (scsicmd
->cmnd
[0]) {
2267 dprintk((KERN_DEBUG
"aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd
)));
2269 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
2270 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2271 count
= scsicmd
->cmnd
[4];
2277 dprintk((KERN_DEBUG
"aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd
)));
2279 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2280 ((u64
)scsicmd
->cmnd
[3] << 48) |
2281 ((u64
)scsicmd
->cmnd
[4] << 40) |
2282 ((u64
)scsicmd
->cmnd
[5] << 32) |
2283 ((u64
)scsicmd
->cmnd
[6] << 24) |
2284 (scsicmd
->cmnd
[7] << 16) |
2285 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2286 count
= (scsicmd
->cmnd
[10] << 24) |
2287 (scsicmd
->cmnd
[11] << 16) |
2288 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
2291 dprintk((KERN_DEBUG
"aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd
)));
2293 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2294 (scsicmd
->cmnd
[3] << 16) |
2295 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2296 count
= (scsicmd
->cmnd
[6] << 24) |
2297 (scsicmd
->cmnd
[7] << 16) |
2298 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2301 dprintk((KERN_DEBUG
"aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd
)));
2303 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2304 (scsicmd
->cmnd
[3] << 16) |
2305 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2306 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
2310 if ((lba
+ count
) > (dev
->fsa_dev
[scmd_id(scsicmd
)].size
)) {
2311 cid
= scmd_id(scsicmd
);
2312 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
2313 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2314 SAM_STAT_CHECK_CONDITION
;
2315 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2316 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2317 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2318 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2319 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2320 SCSI_SENSE_BUFFERSIZE
));
2321 scsicmd
->scsi_done(scsicmd
);
2325 dprintk((KERN_DEBUG
"aac_read[cpu %d]: lba = %llu, t = %ld.\n",
2326 smp_processor_id(), (unsigned long long)lba
, jiffies
));
2327 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
2330 * Alocate and initialize a Fib
2332 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
2334 status
= aac_adapter_read(cmd_fibcontext
, scsicmd
, lba
, count
);
2337 * Check that the command queued to the controller
2339 if (status
== -EINPROGRESS
) {
2340 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2344 printk(KERN_WARNING
"aac_read: aac_fib_send failed with status: %d.\n", status
);
2346 * For some reason, the Fib didn't queue, return QUEUE_FULL
2348 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
2349 scsicmd
->scsi_done(scsicmd
);
2350 aac_fib_complete(cmd_fibcontext
);
2351 aac_fib_free(cmd_fibcontext
);
2355 static int aac_write(struct scsi_cmnd
* scsicmd
)
2361 struct aac_dev
*dev
;
2362 struct fib
* cmd_fibcontext
;
2365 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2367 * Get block address and transfer length
2369 if (scsicmd
->cmnd
[0] == WRITE_6
) /* 6 byte command */
2371 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) | (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2372 count
= scsicmd
->cmnd
[4];
2376 } else if (scsicmd
->cmnd
[0] == WRITE_16
) { /* 16 byte command */
2377 dprintk((KERN_DEBUG
"aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd
)));
2379 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2380 ((u64
)scsicmd
->cmnd
[3] << 48) |
2381 ((u64
)scsicmd
->cmnd
[4] << 40) |
2382 ((u64
)scsicmd
->cmnd
[5] << 32) |
2383 ((u64
)scsicmd
->cmnd
[6] << 24) |
2384 (scsicmd
->cmnd
[7] << 16) |
2385 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2386 count
= (scsicmd
->cmnd
[10] << 24) | (scsicmd
->cmnd
[11] << 16) |
2387 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
2388 fua
= scsicmd
->cmnd
[1] & 0x8;
2389 } else if (scsicmd
->cmnd
[0] == WRITE_12
) { /* 12 byte command */
2390 dprintk((KERN_DEBUG
"aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd
)));
2392 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16)
2393 | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2394 count
= (scsicmd
->cmnd
[6] << 24) | (scsicmd
->cmnd
[7] << 16)
2395 | (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2396 fua
= scsicmd
->cmnd
[1] & 0x8;
2398 dprintk((KERN_DEBUG
"aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd
)));
2399 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2400 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
2401 fua
= scsicmd
->cmnd
[1] & 0x8;
2404 if ((lba
+ count
) > (dev
->fsa_dev
[scmd_id(scsicmd
)].size
)) {
2405 cid
= scmd_id(scsicmd
);
2406 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
2407 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2408 SAM_STAT_CHECK_CONDITION
;
2409 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2410 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2411 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2412 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2413 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2414 SCSI_SENSE_BUFFERSIZE
));
2415 scsicmd
->scsi_done(scsicmd
);
2419 dprintk((KERN_DEBUG
"aac_write[cpu %d]: lba = %llu, t = %ld.\n",
2420 smp_processor_id(), (unsigned long long)lba
, jiffies
));
2421 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
2424 * Allocate and initialize a Fib then setup a BlockWrite command
2426 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
2428 status
= aac_adapter_write(cmd_fibcontext
, scsicmd
, lba
, count
, fua
);
2431 * Check that the command queued to the controller
2433 if (status
== -EINPROGRESS
) {
2434 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2438 printk(KERN_WARNING
"aac_write: aac_fib_send failed with status: %d\n", status
);
2440 * For some reason, the Fib didn't queue, return QUEUE_FULL
2442 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
2443 scsicmd
->scsi_done(scsicmd
);
2445 aac_fib_complete(cmd_fibcontext
);
2446 aac_fib_free(cmd_fibcontext
);
2450 static void synchronize_callback(void *context
, struct fib
*fibptr
)
2452 struct aac_synchronize_reply
*synchronizereply
;
2453 struct scsi_cmnd
*cmd
;
2457 if (!aac_valid_context(cmd
, fibptr
))
2460 dprintk((KERN_DEBUG
"synchronize_callback[cpu %d]: t = %ld.\n",
2461 smp_processor_id(), jiffies
));
2462 BUG_ON(fibptr
== NULL
);
2465 synchronizereply
= fib_data(fibptr
);
2466 if (le32_to_cpu(synchronizereply
->status
) == CT_OK
)
2467 cmd
->result
= DID_OK
<< 16 |
2468 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2470 struct scsi_device
*sdev
= cmd
->device
;
2471 struct aac_dev
*dev
= fibptr
->dev
;
2472 u32 cid
= sdev_id(sdev
);
2474 "synchronize_callback: synchronize failed, status = %d\n",
2475 le32_to_cpu(synchronizereply
->status
));
2476 cmd
->result
= DID_OK
<< 16 |
2477 COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2478 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2479 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2480 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2481 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2482 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2483 SCSI_SENSE_BUFFERSIZE
));
2486 aac_fib_complete(fibptr
);
2487 aac_fib_free(fibptr
);
2488 cmd
->scsi_done(cmd
);
2491 static int aac_synchronize(struct scsi_cmnd
*scsicmd
)
2494 struct fib
*cmd_fibcontext
;
2495 struct aac_synchronize
*synchronizecmd
;
2496 struct scsi_cmnd
*cmd
;
2497 struct scsi_device
*sdev
= scsicmd
->device
;
2499 struct aac_dev
*aac
;
2500 u64 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) |
2501 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2502 u32 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
2503 unsigned long flags
;
2506 * Wait for all outstanding queued commands to complete to this
2507 * specific target (block).
2509 spin_lock_irqsave(&sdev
->list_lock
, flags
);
2510 list_for_each_entry(cmd
, &sdev
->cmd_list
, list
)
2511 if (cmd
->SCp
.phase
== AAC_OWNER_FIRMWARE
) {
2515 if (cmd
->cmnd
[0] == WRITE_6
) {
2516 cmnd_lba
= ((cmd
->cmnd
[1] & 0x1F) << 16) |
2517 (cmd
->cmnd
[2] << 8) |
2519 cmnd_count
= cmd
->cmnd
[4];
2520 if (cmnd_count
== 0)
2522 } else if (cmd
->cmnd
[0] == WRITE_16
) {
2523 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 56) |
2524 ((u64
)cmd
->cmnd
[3] << 48) |
2525 ((u64
)cmd
->cmnd
[4] << 40) |
2526 ((u64
)cmd
->cmnd
[5] << 32) |
2527 ((u64
)cmd
->cmnd
[6] << 24) |
2528 (cmd
->cmnd
[7] << 16) |
2529 (cmd
->cmnd
[8] << 8) |
2531 cmnd_count
= (cmd
->cmnd
[10] << 24) |
2532 (cmd
->cmnd
[11] << 16) |
2533 (cmd
->cmnd
[12] << 8) |
2535 } else if (cmd
->cmnd
[0] == WRITE_12
) {
2536 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
2537 (cmd
->cmnd
[3] << 16) |
2538 (cmd
->cmnd
[4] << 8) |
2540 cmnd_count
= (cmd
->cmnd
[6] << 24) |
2541 (cmd
->cmnd
[7] << 16) |
2542 (cmd
->cmnd
[8] << 8) |
2544 } else if (cmd
->cmnd
[0] == WRITE_10
) {
2545 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
2546 (cmd
->cmnd
[3] << 16) |
2547 (cmd
->cmnd
[4] << 8) |
2549 cmnd_count
= (cmd
->cmnd
[7] << 8) |
2553 if (((cmnd_lba
+ cmnd_count
) < lba
) ||
2554 (count
&& ((lba
+ count
) < cmnd_lba
)))
2560 spin_unlock_irqrestore(&sdev
->list_lock
, flags
);
2563 * Yield the processor (requeue for later)
2566 return SCSI_MLQUEUE_DEVICE_BUSY
;
2568 aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
2570 return SCSI_MLQUEUE_HOST_BUSY
;
2573 * Allocate and initialize a Fib
2575 if (!(cmd_fibcontext
= aac_fib_alloc(aac
)))
2576 return SCSI_MLQUEUE_HOST_BUSY
;
2578 aac_fib_init(cmd_fibcontext
);
2580 synchronizecmd
= fib_data(cmd_fibcontext
);
2581 synchronizecmd
->command
= cpu_to_le32(VM_ContainerConfig
);
2582 synchronizecmd
->type
= cpu_to_le32(CT_FLUSH_CACHE
);
2583 synchronizecmd
->cid
= cpu_to_le32(scmd_id(scsicmd
));
2584 synchronizecmd
->count
=
2585 cpu_to_le32(sizeof(((struct aac_synchronize_reply
*)NULL
)->data
));
2588 * Now send the Fib to the adapter
2590 status
= aac_fib_send(ContainerCommand
,
2592 sizeof(struct aac_synchronize
),
2595 (fib_callback
)synchronize_callback
,
2599 * Check that the command queued to the controller
2601 if (status
== -EINPROGRESS
) {
2602 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2607 "aac_synchronize: aac_fib_send failed with status: %d.\n", status
);
2608 aac_fib_complete(cmd_fibcontext
);
2609 aac_fib_free(cmd_fibcontext
);
2610 return SCSI_MLQUEUE_HOST_BUSY
;
2613 static void aac_start_stop_callback(void *context
, struct fib
*fibptr
)
2615 struct scsi_cmnd
*scsicmd
= context
;
2617 if (!aac_valid_context(scsicmd
, fibptr
))
2620 BUG_ON(fibptr
== NULL
);
2622 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2624 aac_fib_complete(fibptr
);
2625 aac_fib_free(fibptr
);
2626 scsicmd
->scsi_done(scsicmd
);
2629 static int aac_start_stop(struct scsi_cmnd
*scsicmd
)
2632 struct fib
*cmd_fibcontext
;
2633 struct aac_power_management
*pmcmd
;
2634 struct scsi_device
*sdev
= scsicmd
->device
;
2635 struct aac_dev
*aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
2637 if (!(aac
->supplement_adapter_info
.supported_options2
&
2638 AAC_OPTION_POWER_MANAGEMENT
)) {
2639 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
2641 scsicmd
->scsi_done(scsicmd
);
2646 return SCSI_MLQUEUE_HOST_BUSY
;
2649 * Allocate and initialize a Fib
2651 cmd_fibcontext
= aac_fib_alloc_tag(aac
, scsicmd
);
2653 aac_fib_init(cmd_fibcontext
);
2655 pmcmd
= fib_data(cmd_fibcontext
);
2656 pmcmd
->command
= cpu_to_le32(VM_ContainerConfig
);
2657 pmcmd
->type
= cpu_to_le32(CT_POWER_MANAGEMENT
);
2658 /* Eject bit ignored, not relevant */
2659 pmcmd
->sub
= (scsicmd
->cmnd
[4] & 1) ?
2660 cpu_to_le32(CT_PM_START_UNIT
) : cpu_to_le32(CT_PM_STOP_UNIT
);
2661 pmcmd
->cid
= cpu_to_le32(sdev_id(sdev
));
2662 pmcmd
->parm
= (scsicmd
->cmnd
[1] & 1) ?
2663 cpu_to_le32(CT_PM_UNIT_IMMEDIATE
) : 0;
2666 * Now send the Fib to the adapter
2668 status
= aac_fib_send(ContainerCommand
,
2670 sizeof(struct aac_power_management
),
2673 (fib_callback
)aac_start_stop_callback
,
2677 * Check that the command queued to the controller
2679 if (status
== -EINPROGRESS
) {
2680 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2684 aac_fib_complete(cmd_fibcontext
);
2685 aac_fib_free(cmd_fibcontext
);
2686 return SCSI_MLQUEUE_HOST_BUSY
;
2690 * aac_scsi_cmd() - Process SCSI command
2691 * @scsicmd: SCSI command block
2693 * Emulate a SCSI command and queue the required request for the
2697 int aac_scsi_cmd(struct scsi_cmnd
* scsicmd
)
2700 struct Scsi_Host
*host
= scsicmd
->device
->host
;
2701 struct aac_dev
*dev
= (struct aac_dev
*)host
->hostdata
;
2702 struct fsa_dev_info
*fsa_dev_ptr
= dev
->fsa_dev
;
2704 if (fsa_dev_ptr
== NULL
)
2707 * If the bus, id or lun is out of range, return fail
2708 * Test does not apply to ID 16, the pseudo id for the controller
2711 cid
= scmd_id(scsicmd
);
2712 if (cid
!= host
->this_id
) {
2713 if (scmd_channel(scsicmd
) == CONTAINER_CHANNEL
) {
2714 if((cid
>= dev
->maximum_num_containers
) ||
2715 (scsicmd
->device
->lun
!= 0)) {
2716 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2721 * If the target container doesn't exist, it may have
2722 * been newly created
2724 if (((fsa_dev_ptr
[cid
].valid
& 1) == 0) ||
2725 (fsa_dev_ptr
[cid
].sense_data
.sense_key
==
2727 switch (scsicmd
->cmnd
[0]) {
2728 case SERVICE_ACTION_IN_16
:
2729 if (!(dev
->raw_io_interface
) ||
2730 !(dev
->raw_io_64
) ||
2731 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2735 case TEST_UNIT_READY
:
2738 return _aac_probe_container(scsicmd
,
2739 aac_probe_container_callback2
);
2744 } else { /* check for physical non-dasd devices */
2745 bus
= aac_logical_to_phys(scmd_channel(scsicmd
));
2746 if (bus
< AAC_MAX_BUSES
&& cid
< AAC_MAX_TARGETS
&&
2747 (dev
->hba_map
[bus
][cid
].expose
2749 if (scsicmd
->cmnd
[0] == INQUIRY
) {
2750 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2755 if (bus
< AAC_MAX_BUSES
&& cid
< AAC_MAX_TARGETS
&&
2756 dev
->hba_map
[bus
][cid
].devtype
2757 == AAC_DEVTYPE_NATIVE_RAW
) {
2760 return aac_send_hba_fib(scsicmd
);
2761 } else if (dev
->nondasd_support
|| expose_physicals
||
2765 return aac_send_srb_fib(scsicmd
);
2767 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2773 * else Command for the controller itself
2775 else if ((scsicmd
->cmnd
[0] != INQUIRY
) && /* only INQUIRY & TUR cmnd supported for controller */
2776 (scsicmd
->cmnd
[0] != TEST_UNIT_READY
))
2778 dprintk((KERN_WARNING
"Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd
->cmnd
[0]));
2779 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2780 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2781 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
2782 ASENCODE_INVALID_COMMAND
, 0, 0);
2783 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2784 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2785 SCSI_SENSE_BUFFERSIZE
));
2789 switch (scsicmd
->cmnd
[0]) {
2796 return aac_read(scsicmd
);
2804 return aac_write(scsicmd
);
2806 case SYNCHRONIZE_CACHE
:
2807 if (((aac_cache
& 6) == 6) && dev
->cache_protected
) {
2808 scsicmd
->result
= AAC_STAT_GOOD
;
2811 /* Issue FIB to tell Firmware to flush it's cache */
2812 if ((aac_cache
& 6) != 2)
2813 return aac_synchronize(scsicmd
);
2816 struct inquiry_data inq_data
;
2818 dprintk((KERN_DEBUG
"INQUIRY command, ID: %d.\n", cid
));
2819 memset(&inq_data
, 0, sizeof (struct inquiry_data
));
2821 if ((scsicmd
->cmnd
[1] & 0x1) && aac_wwn
) {
2822 char *arr
= (char *)&inq_data
;
2825 arr
[0] = (scmd_id(scsicmd
) == host
->this_id
) ?
2826 INQD_PDT_PROC
: INQD_PDT_DA
;
2827 if (scsicmd
->cmnd
[2] == 0) {
2828 /* supported vital product data pages */
2833 arr
[1] = scsicmd
->cmnd
[2];
2834 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2836 scsicmd
->result
= AAC_STAT_GOOD
;
2837 } else if (scsicmd
->cmnd
[2] == 0x80) {
2838 /* unit serial number page */
2839 arr
[3] = setinqserial(dev
, &arr
[4],
2841 arr
[1] = scsicmd
->cmnd
[2];
2842 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2845 return aac_get_container_serial(
2847 scsicmd
->result
= AAC_STAT_GOOD
;
2848 } else if (scsicmd
->cmnd
[2] == 0x83) {
2849 /* vpd page 0x83 - Device Identification Page */
2850 char *sno
= (char *)&inq_data
;
2851 sno
[3] = setinqserial(dev
, &sno
[4],
2854 return aac_get_container_serial(
2856 scsicmd
->result
= AAC_STAT_GOOD
;
2858 /* vpd page not implemented */
2859 scsicmd
->result
= DID_OK
<< 16 |
2860 COMMAND_COMPLETE
<< 8 |
2861 SAM_STAT_CHECK_CONDITION
;
2862 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2863 ILLEGAL_REQUEST
, SENCODE_INVALID_CDB_FIELD
,
2864 ASENCODE_NO_SENSE
, 7, 2);
2865 memcpy(scsicmd
->sense_buffer
,
2866 &dev
->fsa_dev
[cid
].sense_data
,
2868 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2869 SCSI_SENSE_BUFFERSIZE
));
2873 inq_data
.inqd_ver
= 2; /* claim compliance to SCSI-2 */
2874 inq_data
.inqd_rdf
= 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
2875 inq_data
.inqd_len
= 31;
2876 /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
2877 inq_data
.inqd_pad2
= 0x32 ; /*WBus16|Sync|CmdQue */
2879 * Set the Vendor, Product, and Revision Level
2880 * see: <vendor>.c i.e. aac.c
2882 if (cid
== host
->this_id
) {
2883 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), ARRAY_SIZE(container_types
));
2884 inq_data
.inqd_pdt
= INQD_PDT_PROC
; /* Processor device */
2885 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2887 scsicmd
->result
= AAC_STAT_GOOD
;
2892 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), fsa_dev_ptr
[cid
].type
);
2893 inq_data
.inqd_pdt
= INQD_PDT_DA
; /* Direct/random access device */
2894 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
2895 return aac_get_container_name(scsicmd
);
2897 case SERVICE_ACTION_IN_16
:
2898 if (!(dev
->raw_io_interface
) ||
2899 !(dev
->raw_io_64
) ||
2900 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2905 unsigned int alloc_len
;
2907 dprintk((KERN_DEBUG
"READ CAPACITY_16 command.\n"));
2908 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2909 cp
[0] = (capacity
>> 56) & 0xff;
2910 cp
[1] = (capacity
>> 48) & 0xff;
2911 cp
[2] = (capacity
>> 40) & 0xff;
2912 cp
[3] = (capacity
>> 32) & 0xff;
2913 cp
[4] = (capacity
>> 24) & 0xff;
2914 cp
[5] = (capacity
>> 16) & 0xff;
2915 cp
[6] = (capacity
>> 8) & 0xff;
2916 cp
[7] = (capacity
>> 0) & 0xff;
2917 cp
[8] = (fsa_dev_ptr
[cid
].block_size
>> 24) & 0xff;
2918 cp
[9] = (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
2919 cp
[10] = (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
2920 cp
[11] = (fsa_dev_ptr
[cid
].block_size
) & 0xff;
2923 alloc_len
= ((scsicmd
->cmnd
[10] << 24)
2924 + (scsicmd
->cmnd
[11] << 16)
2925 + (scsicmd
->cmnd
[12] << 8) + scsicmd
->cmnd
[13]);
2927 alloc_len
= min_t(size_t, alloc_len
, sizeof(cp
));
2928 scsi_sg_copy_from_buffer(scsicmd
, cp
, alloc_len
);
2929 if (alloc_len
< scsi_bufflen(scsicmd
))
2930 scsi_set_resid(scsicmd
,
2931 scsi_bufflen(scsicmd
) - alloc_len
);
2933 /* Do not cache partition table for arrays */
2934 scsicmd
->device
->removable
= 1;
2936 scsicmd
->result
= AAC_STAT_GOOD
;
2945 dprintk((KERN_DEBUG
"READ CAPACITY command.\n"));
2946 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
2947 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2951 cp
[0] = (capacity
>> 24) & 0xff;
2952 cp
[1] = (capacity
>> 16) & 0xff;
2953 cp
[2] = (capacity
>> 8) & 0xff;
2954 cp
[3] = (capacity
>> 0) & 0xff;
2955 cp
[4] = (fsa_dev_ptr
[cid
].block_size
>> 24) & 0xff;
2956 cp
[5] = (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
2957 cp
[6] = (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
2958 cp
[7] = (fsa_dev_ptr
[cid
].block_size
) & 0xff;
2959 scsi_sg_copy_from_buffer(scsicmd
, cp
, sizeof(cp
));
2960 /* Do not cache partition table for arrays */
2961 scsicmd
->device
->removable
= 1;
2962 scsicmd
->result
= AAC_STAT_GOOD
;
2968 int mode_buf_length
= 4;
2972 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
2973 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2977 dprintk((KERN_DEBUG
"MODE SENSE command.\n"));
2978 memset((char *)&mpd
, 0, sizeof(aac_modep_data
));
2980 /* Mode data length */
2981 mpd
.hd
.data_length
= sizeof(mpd
.hd
) - 1;
2982 /* Medium type - default */
2983 mpd
.hd
.med_type
= 0;
2984 /* Device-specific param,
2985 bit 8: 0/1 = write enabled/protected
2986 bit 4: 0/1 = FUA enabled */
2989 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
2990 mpd
.hd
.dev_par
= 0x10;
2991 if (scsicmd
->cmnd
[1] & 0x8)
2992 mpd
.hd
.bd_length
= 0; /* Block descriptor length */
2994 mpd
.hd
.bd_length
= sizeof(mpd
.bd
);
2995 mpd
.hd
.data_length
+= mpd
.hd
.bd_length
;
2996 mpd
.bd
.block_length
[0] =
2997 (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
2998 mpd
.bd
.block_length
[1] =
2999 (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3000 mpd
.bd
.block_length
[2] =
3001 fsa_dev_ptr
[cid
].block_size
& 0xff;
3003 mpd
.mpc_buf
[0] = scsicmd
->cmnd
[2];
3004 if (scsicmd
->cmnd
[2] == 0x1C) {
3006 mpd
.mpc_buf
[1] = 0xa;
3007 /* Mode data length */
3008 mpd
.hd
.data_length
= 23;
3010 /* Mode data length */
3011 mpd
.hd
.data_length
= 15;
3014 if (capacity
> 0xffffff) {
3015 mpd
.bd
.block_count
[0] = 0xff;
3016 mpd
.bd
.block_count
[1] = 0xff;
3017 mpd
.bd
.block_count
[2] = 0xff;
3019 mpd
.bd
.block_count
[0] = (capacity
>> 16) & 0xff;
3020 mpd
.bd
.block_count
[1] = (capacity
>> 8) & 0xff;
3021 mpd
.bd
.block_count
[2] = capacity
& 0xff;
3024 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
3025 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
3026 mpd
.hd
.data_length
+= 3;
3029 mpd
.mpc_buf
[2] = ((aac_cache
& 6) == 2)
3030 ? 0 : 0x04; /* WCE */
3031 mode_buf_length
= sizeof(mpd
);
3034 if (mode_buf_length
> scsicmd
->cmnd
[4])
3035 mode_buf_length
= scsicmd
->cmnd
[4];
3037 mode_buf_length
= sizeof(mpd
);
3038 scsi_sg_copy_from_buffer(scsicmd
,
3041 scsicmd
->result
= AAC_STAT_GOOD
;
3047 int mode_buf_length
= 8;
3048 aac_modep10_data mpd10
;
3050 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
3051 capacity
= fsa_dev_ptr
[cid
].size
- 1;
3055 dprintk((KERN_DEBUG
"MODE SENSE 10 byte command.\n"));
3056 memset((char *)&mpd10
, 0, sizeof(aac_modep10_data
));
3057 /* Mode data length (MSB) */
3058 mpd10
.hd
.data_length
[0] = 0;
3059 /* Mode data length (LSB) */
3060 mpd10
.hd
.data_length
[1] = sizeof(mpd10
.hd
) - 1;
3061 /* Medium type - default */
3062 mpd10
.hd
.med_type
= 0;
3063 /* Device-specific param,
3064 bit 8: 0/1 = write enabled/protected
3065 bit 4: 0/1 = FUA enabled */
3066 mpd10
.hd
.dev_par
= 0;
3068 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
3069 mpd10
.hd
.dev_par
= 0x10;
3070 mpd10
.hd
.rsrvd
[0] = 0; /* reserved */
3071 mpd10
.hd
.rsrvd
[1] = 0; /* reserved */
3072 if (scsicmd
->cmnd
[1] & 0x8) {
3073 /* Block descriptor length (MSB) */
3074 mpd10
.hd
.bd_length
[0] = 0;
3075 /* Block descriptor length (LSB) */
3076 mpd10
.hd
.bd_length
[1] = 0;
3078 mpd10
.hd
.bd_length
[0] = 0;
3079 mpd10
.hd
.bd_length
[1] = sizeof(mpd10
.bd
);
3081 mpd10
.hd
.data_length
[1] += mpd10
.hd
.bd_length
[1];
3083 mpd10
.bd
.block_length
[0] =
3084 (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
3085 mpd10
.bd
.block_length
[1] =
3086 (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3087 mpd10
.bd
.block_length
[2] =
3088 fsa_dev_ptr
[cid
].block_size
& 0xff;
3090 if (capacity
> 0xffffff) {
3091 mpd10
.bd
.block_count
[0] = 0xff;
3092 mpd10
.bd
.block_count
[1] = 0xff;
3093 mpd10
.bd
.block_count
[2] = 0xff;
3095 mpd10
.bd
.block_count
[0] =
3096 (capacity
>> 16) & 0xff;
3097 mpd10
.bd
.block_count
[1] =
3098 (capacity
>> 8) & 0xff;
3099 mpd10
.bd
.block_count
[2] =
3103 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
3104 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
3105 mpd10
.hd
.data_length
[1] += 3;
3106 mpd10
.mpc_buf
[0] = 8;
3107 mpd10
.mpc_buf
[1] = 1;
3108 mpd10
.mpc_buf
[2] = ((aac_cache
& 6) == 2)
3109 ? 0 : 0x04; /* WCE */
3110 mode_buf_length
= sizeof(mpd10
);
3111 if (mode_buf_length
> scsicmd
->cmnd
[8])
3112 mode_buf_length
= scsicmd
->cmnd
[8];
3114 scsi_sg_copy_from_buffer(scsicmd
,
3118 scsicmd
->result
= AAC_STAT_GOOD
;
3122 dprintk((KERN_DEBUG
"REQUEST SENSE command.\n"));
3123 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
3124 sizeof(struct sense_data
));
3125 memset(&dev
->fsa_dev
[cid
].sense_data
, 0,
3126 sizeof(struct sense_data
));
3127 scsicmd
->result
= AAC_STAT_GOOD
;
3130 case ALLOW_MEDIUM_REMOVAL
:
3131 dprintk((KERN_DEBUG
"LOCK command.\n"));
3132 if (scsicmd
->cmnd
[4])
3133 fsa_dev_ptr
[cid
].locked
= 1;
3135 fsa_dev_ptr
[cid
].locked
= 0;
3137 scsicmd
->result
= AAC_STAT_GOOD
;
3140 * These commands are all No-Ops
3142 case TEST_UNIT_READY
:
3143 if (fsa_dev_ptr
[cid
].sense_data
.sense_key
== NOT_READY
) {
3144 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3145 SAM_STAT_CHECK_CONDITION
;
3146 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
3147 NOT_READY
, SENCODE_BECOMING_READY
,
3148 ASENCODE_BECOMING_READY
, 0, 0);
3149 memcpy(scsicmd
->sense_buffer
,
3150 &dev
->fsa_dev
[cid
].sense_data
,
3152 sizeof(dev
->fsa_dev
[cid
].sense_data
),
3153 SCSI_SENSE_BUFFERSIZE
));
3159 case REASSIGN_BLOCKS
:
3161 scsicmd
->result
= AAC_STAT_GOOD
;
3165 return aac_start_stop(scsicmd
);
3170 * Unhandled commands
3172 dprintk((KERN_WARNING
"Unhandled SCSI Command: 0x%x.\n",
3174 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
3175 SAM_STAT_CHECK_CONDITION
;
3176 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
3177 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
3178 ASENCODE_INVALID_COMMAND
, 0, 0);
3179 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
3181 sizeof(dev
->fsa_dev
[cid
].sense_data
),
3182 SCSI_SENSE_BUFFERSIZE
));
3187 scsicmd
->scsi_done(scsicmd
);
3191 static int query_disk(struct aac_dev
*dev
, void __user
*arg
)
3193 struct aac_query_disk qd
;
3194 struct fsa_dev_info
*fsa_dev_ptr
;
3196 fsa_dev_ptr
= dev
->fsa_dev
;
3199 if (copy_from_user(&qd
, arg
, sizeof (struct aac_query_disk
)))
3203 else if ((qd
.bus
== -1) && (qd
.id
== -1) && (qd
.lun
== -1))
3205 if (qd
.cnum
< 0 || qd
.cnum
>= dev
->maximum_num_containers
)
3207 qd
.instance
= dev
->scsi_host_ptr
->host_no
;
3209 qd
.id
= CONTAINER_TO_ID(qd
.cnum
);
3210 qd
.lun
= CONTAINER_TO_LUN(qd
.cnum
);
3212 else return -EINVAL
;
3214 qd
.valid
= fsa_dev_ptr
[qd
.cnum
].valid
!= 0;
3215 qd
.locked
= fsa_dev_ptr
[qd
.cnum
].locked
;
3216 qd
.deleted
= fsa_dev_ptr
[qd
.cnum
].deleted
;
3218 if (fsa_dev_ptr
[qd
.cnum
].devname
[0] == '\0')
3223 strlcpy(qd
.name
, fsa_dev_ptr
[qd
.cnum
].devname
,
3224 min(sizeof(qd
.name
), sizeof(fsa_dev_ptr
[qd
.cnum
].devname
) + 1));
3226 if (copy_to_user(arg
, &qd
, sizeof (struct aac_query_disk
)))
3231 static int force_delete_disk(struct aac_dev
*dev
, void __user
*arg
)
3233 struct aac_delete_disk dd
;
3234 struct fsa_dev_info
*fsa_dev_ptr
;
3236 fsa_dev_ptr
= dev
->fsa_dev
;
3240 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
3243 if (dd
.cnum
>= dev
->maximum_num_containers
)
3246 * Mark this container as being deleted.
3248 fsa_dev_ptr
[dd
.cnum
].deleted
= 1;
3250 * Mark the container as no longer valid
3252 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
3256 static int delete_disk(struct aac_dev
*dev
, void __user
*arg
)
3258 struct aac_delete_disk dd
;
3259 struct fsa_dev_info
*fsa_dev_ptr
;
3261 fsa_dev_ptr
= dev
->fsa_dev
;
3265 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
3268 if (dd
.cnum
>= dev
->maximum_num_containers
)
3271 * If the container is locked, it can not be deleted by the API.
3273 if (fsa_dev_ptr
[dd
.cnum
].locked
)
3277 * Mark the container as no longer being valid.
3279 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
3280 fsa_dev_ptr
[dd
.cnum
].devname
[0] = '\0';
3285 int aac_dev_ioctl(struct aac_dev
*dev
, int cmd
, void __user
*arg
)
3288 case FSACTL_QUERY_DISK
:
3289 return query_disk(dev
, arg
);
3290 case FSACTL_DELETE_DISK
:
3291 return delete_disk(dev
, arg
);
3292 case FSACTL_FORCE_DELETE_DISK
:
3293 return force_delete_disk(dev
, arg
);
3294 case FSACTL_GET_CONTAINERS
:
3295 return aac_get_containers(dev
);
3304 * @context: the context set in the fib - here it is scsi cmd
3305 * @fibptr: pointer to the fib
3307 * Handles the completion of a scsi command to a non dasd device
3311 static void aac_srb_callback(void *context
, struct fib
* fibptr
)
3313 struct aac_dev
*dev
;
3314 struct aac_srb_reply
*srbreply
;
3315 struct scsi_cmnd
*scsicmd
;
3317 scsicmd
= (struct scsi_cmnd
*) context
;
3319 if (!aac_valid_context(scsicmd
, fibptr
))
3322 BUG_ON(fibptr
== NULL
);
3326 srbreply
= (struct aac_srb_reply
*) fib_data(fibptr
);
3328 scsicmd
->sense_buffer
[0] = '\0'; /* Initialize sense valid flag to false */
3330 if (fibptr
->flags
& FIB_CONTEXT_FLAG_FASTRESP
) {
3332 srbreply
->srb_status
= cpu_to_le32(SRB_STATUS_SUCCESS
);
3333 srbreply
->scsi_status
= cpu_to_le32(SAM_STAT_GOOD
);
3336 * Calculate resid for sg
3338 scsi_set_resid(scsicmd
, scsi_bufflen(scsicmd
)
3339 - le32_to_cpu(srbreply
->data_xfer_length
));
3343 scsi_dma_unmap(scsicmd
);
3345 /* expose physical device if expose_physicald flag is on */
3346 if (scsicmd
->cmnd
[0] == INQUIRY
&& !(scsicmd
->cmnd
[1] & 0x01)
3347 && expose_physicals
> 0)
3348 aac_expose_phy_device(scsicmd
);
3351 * First check the fib status
3354 if (le32_to_cpu(srbreply
->status
) != ST_OK
) {
3357 pr_warn("aac_srb_callback: srb failed, status = %d\n",
3358 le32_to_cpu(srbreply
->status
));
3359 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
3360 SCSI_SENSE_BUFFERSIZE
);
3361 scsicmd
->result
= DID_ERROR
<< 16
3362 | COMMAND_COMPLETE
<< 8
3363 | SAM_STAT_CHECK_CONDITION
;
3364 memcpy(scsicmd
->sense_buffer
,
3365 srbreply
->sense_data
, len
);
3369 * Next check the srb status
3371 switch ((le32_to_cpu(srbreply
->srb_status
))&0x3f) {
3372 case SRB_STATUS_ERROR_RECOVERY
:
3373 case SRB_STATUS_PENDING
:
3374 case SRB_STATUS_SUCCESS
:
3375 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3377 case SRB_STATUS_DATA_OVERRUN
:
3378 switch (scsicmd
->cmnd
[0]) {
3387 if (le32_to_cpu(srbreply
->data_xfer_length
)
3388 < scsicmd
->underflow
)
3389 pr_warn("aacraid: SCSI CMD underflow\n");
3391 pr_warn("aacraid: SCSI CMD Data Overrun\n");
3392 scsicmd
->result
= DID_ERROR
<< 16
3393 | COMMAND_COMPLETE
<< 8;
3396 scsicmd
->result
= DID_OK
<< 16
3397 | COMMAND_COMPLETE
<< 8;
3400 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3404 case SRB_STATUS_ABORTED
:
3405 scsicmd
->result
= DID_ABORT
<< 16 | ABORT
<< 8;
3407 case SRB_STATUS_ABORT_FAILED
:
3409 * Not sure about this one - but assuming the
3410 * hba was trying to abort for some reason
3412 scsicmd
->result
= DID_ERROR
<< 16 | ABORT
<< 8;
3414 case SRB_STATUS_PARITY_ERROR
:
3415 scsicmd
->result
= DID_PARITY
<< 16
3416 | MSG_PARITY_ERROR
<< 8;
3418 case SRB_STATUS_NO_DEVICE
:
3419 case SRB_STATUS_INVALID_PATH_ID
:
3420 case SRB_STATUS_INVALID_TARGET_ID
:
3421 case SRB_STATUS_INVALID_LUN
:
3422 case SRB_STATUS_SELECTION_TIMEOUT
:
3423 scsicmd
->result
= DID_NO_CONNECT
<< 16
3424 | COMMAND_COMPLETE
<< 8;
3427 case SRB_STATUS_COMMAND_TIMEOUT
:
3428 case SRB_STATUS_TIMEOUT
:
3429 scsicmd
->result
= DID_TIME_OUT
<< 16
3430 | COMMAND_COMPLETE
<< 8;
3433 case SRB_STATUS_BUSY
:
3434 scsicmd
->result
= DID_BUS_BUSY
<< 16
3435 | COMMAND_COMPLETE
<< 8;
3438 case SRB_STATUS_BUS_RESET
:
3439 scsicmd
->result
= DID_RESET
<< 16
3440 | COMMAND_COMPLETE
<< 8;
3443 case SRB_STATUS_MESSAGE_REJECTED
:
3444 scsicmd
->result
= DID_ERROR
<< 16
3445 | MESSAGE_REJECT
<< 8;
3447 case SRB_STATUS_REQUEST_FLUSHED
:
3448 case SRB_STATUS_ERROR
:
3449 case SRB_STATUS_INVALID_REQUEST
:
3450 case SRB_STATUS_REQUEST_SENSE_FAILED
:
3451 case SRB_STATUS_NO_HBA
:
3452 case SRB_STATUS_UNEXPECTED_BUS_FREE
:
3453 case SRB_STATUS_PHASE_SEQUENCE_FAILURE
:
3454 case SRB_STATUS_BAD_SRB_BLOCK_LENGTH
:
3455 case SRB_STATUS_DELAYED_RETRY
:
3456 case SRB_STATUS_BAD_FUNCTION
:
3457 case SRB_STATUS_NOT_STARTED
:
3458 case SRB_STATUS_NOT_IN_USE
:
3459 case SRB_STATUS_FORCE_ABORT
:
3460 case SRB_STATUS_DOMAIN_VALIDATION_FAIL
:
3462 #ifdef AAC_DETAILED_STATUS_INFO
3463 pr_info("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x -scsi status 0x%x\n",
3464 le32_to_cpu(srbreply
->srb_status
) & 0x3F,
3465 aac_get_status_string(
3466 le32_to_cpu(srbreply
->srb_status
) & 0x3F),
3468 le32_to_cpu(srbreply
->scsi_status
));
3471 * When the CC bit is SET by the host in ATA pass thru CDB,
3472 * driver is supposed to return DID_OK
3474 * When the CC bit is RESET by the host, driver should
3477 if ((scsicmd
->cmnd
[0] == ATA_12
)
3478 || (scsicmd
->cmnd
[0] == ATA_16
)) {
3480 if (scsicmd
->cmnd
[2] & (0x01 << 5)) {
3481 scsicmd
->result
= DID_OK
<< 16
3482 | COMMAND_COMPLETE
<< 8;
3485 scsicmd
->result
= DID_ERROR
<< 16
3486 | COMMAND_COMPLETE
<< 8;
3490 scsicmd
->result
= DID_ERROR
<< 16
3491 | COMMAND_COMPLETE
<< 8;
3495 if (le32_to_cpu(srbreply
->scsi_status
)
3496 == SAM_STAT_CHECK_CONDITION
) {
3499 scsicmd
->result
|= SAM_STAT_CHECK_CONDITION
;
3500 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
3501 SCSI_SENSE_BUFFERSIZE
);
3502 #ifdef AAC_DETAILED_STATUS_INFO
3503 pr_warn("aac_srb_callback: check condition, status = %d len=%d\n",
3504 le32_to_cpu(srbreply
->status
), len
);
3506 memcpy(scsicmd
->sense_buffer
,
3507 srbreply
->sense_data
, len
);
3511 * OR in the scsi status (already shifted up a bit)
3513 scsicmd
->result
|= le32_to_cpu(srbreply
->scsi_status
);
3515 aac_fib_complete(fibptr
);
3516 scsicmd
->scsi_done(scsicmd
);
3519 static void hba_resp_task_complete(struct aac_dev
*dev
,
3520 struct scsi_cmnd
*scsicmd
,
3521 struct aac_hba_resp
*err
) {
3523 scsicmd
->result
= err
->status
;
3524 /* set residual count */
3525 scsi_set_resid(scsicmd
, le32_to_cpu(err
->residual_count
));
3527 switch (err
->status
) {
3529 scsicmd
->result
|= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3531 case SAM_STAT_CHECK_CONDITION
:
3535 len
= min_t(u8
, err
->sense_response_data_len
,
3536 SCSI_SENSE_BUFFERSIZE
);
3538 memcpy(scsicmd
->sense_buffer
,
3539 err
->sense_response_buf
, len
);
3540 scsicmd
->result
|= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3544 scsicmd
->result
|= DID_BUS_BUSY
<< 16 | COMMAND_COMPLETE
<< 8;
3546 case SAM_STAT_TASK_ABORTED
:
3547 scsicmd
->result
|= DID_ABORT
<< 16 | ABORT
<< 8;
3549 case SAM_STAT_RESERVATION_CONFLICT
:
3550 case SAM_STAT_TASK_SET_FULL
:
3552 scsicmd
->result
|= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
3557 static void hba_resp_task_failure(struct aac_dev
*dev
,
3558 struct scsi_cmnd
*scsicmd
,
3559 struct aac_hba_resp
*err
)
3561 switch (err
->status
) {
3562 case HBA_RESP_STAT_HBAMODE_DISABLED
:
3566 bus
= aac_logical_to_phys(scmd_channel(scsicmd
));
3567 cid
= scmd_id(scsicmd
);
3568 if (dev
->hba_map
[bus
][cid
].devtype
== AAC_DEVTYPE_NATIVE_RAW
) {
3569 dev
->hba_map
[bus
][cid
].devtype
= AAC_DEVTYPE_ARC_RAW
;
3570 dev
->hba_map
[bus
][cid
].rmw_nexus
= 0xffffffff;
3572 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
3575 case HBA_RESP_STAT_IO_ERROR
:
3576 case HBA_RESP_STAT_NO_PATH_TO_DEVICE
:
3577 scsicmd
->result
= DID_OK
<< 16 |
3578 COMMAND_COMPLETE
<< 8 | SAM_STAT_BUSY
;
3580 case HBA_RESP_STAT_IO_ABORTED
:
3581 scsicmd
->result
= DID_ABORT
<< 16 | ABORT
<< 8;
3583 case HBA_RESP_STAT_INVALID_DEVICE
:
3584 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
3586 case HBA_RESP_STAT_UNDERRUN
:
3587 /* UNDERRUN is OK */
3588 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3590 case HBA_RESP_STAT_OVERRUN
:
3592 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
3600 * @context: the context set in the fib - here it is scsi cmd
3601 * @fibptr: pointer to the fib
3603 * Handles the completion of a native HBA scsi command
3606 void aac_hba_callback(void *context
, struct fib
*fibptr
)
3608 struct aac_dev
*dev
;
3609 struct scsi_cmnd
*scsicmd
;
3611 struct aac_hba_resp
*err
=
3612 &((struct aac_native_hba
*)fibptr
->hw_fib_va
)->resp
.err
;
3614 scsicmd
= (struct scsi_cmnd
*) context
;
3616 if (!aac_valid_context(scsicmd
, fibptr
))
3619 WARN_ON(fibptr
== NULL
);
3622 if (!(fibptr
->flags
& FIB_CONTEXT_FLAG_NATIVE_HBA_TMF
))
3623 scsi_dma_unmap(scsicmd
);
3625 if (fibptr
->flags
& FIB_CONTEXT_FLAG_FASTRESP
) {
3627 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3631 switch (err
->service_response
) {
3632 case HBA_RESP_SVCRES_TASK_COMPLETE
:
3633 hba_resp_task_complete(dev
, scsicmd
, err
);
3635 case HBA_RESP_SVCRES_FAILURE
:
3636 hba_resp_task_failure(dev
, scsicmd
, err
);
3638 case HBA_RESP_SVCRES_TMF_REJECTED
:
3639 scsicmd
->result
= DID_ERROR
<< 16 | MESSAGE_REJECT
<< 8;
3641 case HBA_RESP_SVCRES_TMF_LUN_INVALID
:
3642 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
3644 case HBA_RESP_SVCRES_TMF_COMPLETE
:
3645 case HBA_RESP_SVCRES_TMF_SUCCEEDED
:
3646 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
3649 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
3654 aac_fib_complete(fibptr
);
3656 if (fibptr
->flags
& FIB_CONTEXT_FLAG_NATIVE_HBA_TMF
)
3657 scsicmd
->SCp
.sent_command
= 1;
3659 scsicmd
->scsi_done(scsicmd
);
3665 * @scsicmd: the scsi command block
3667 * This routine will form a FIB and fill in the aac_srb from the
3668 * scsicmd passed in.
3671 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
)
3673 struct fib
* cmd_fibcontext
;
3674 struct aac_dev
* dev
;
3677 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
3678 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
3679 scsicmd
->device
->lun
> 7) {
3680 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3681 scsicmd
->scsi_done(scsicmd
);
3686 * Allocate and initialize a Fib then setup a BlockWrite command
3688 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
3690 status
= aac_adapter_scsi(cmd_fibcontext
, scsicmd
);
3693 * Check that the command queued to the controller
3695 if (status
== -EINPROGRESS
) {
3696 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
3700 printk(KERN_WARNING
"aac_srb: aac_fib_send failed with status: %d\n", status
);
3701 aac_fib_complete(cmd_fibcontext
);
3702 aac_fib_free(cmd_fibcontext
);
3710 * @scsicmd: the scsi command block
3712 * This routine will form a FIB and fill in the aac_hba_cmd_req from the
3713 * scsicmd passed in.
3715 static int aac_send_hba_fib(struct scsi_cmnd
*scsicmd
)
3717 struct fib
*cmd_fibcontext
;
3718 struct aac_dev
*dev
;
3721 dev
= shost_priv(scsicmd
->device
->host
);
3722 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
3723 scsicmd
->device
->lun
> AAC_MAX_LUN
- 1) {
3724 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3725 scsicmd
->scsi_done(scsicmd
);
3730 * Allocate and initialize a Fib then setup a BlockWrite command
3732 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
3733 if (!cmd_fibcontext
)
3736 status
= aac_adapter_hba(cmd_fibcontext
, scsicmd
);
3739 * Check that the command queued to the controller
3741 if (status
== -EINPROGRESS
) {
3742 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
3746 pr_warn("aac_hba_cmd_req: aac_fib_send failed with status: %d\n",
3748 aac_fib_complete(cmd_fibcontext
);
3749 aac_fib_free(cmd_fibcontext
);
3755 static long aac_build_sg(struct scsi_cmnd
*scsicmd
, struct sgmap
*psg
)
3757 struct aac_dev
*dev
;
3758 unsigned long byte_count
= 0;
3761 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
3762 // Get rid of old data
3764 psg
->sg
[0].addr
= 0;
3765 psg
->sg
[0].count
= 0;
3767 nseg
= scsi_dma_map(scsicmd
);
3771 struct scatterlist
*sg
;
3774 psg
->count
= cpu_to_le32(nseg
);
3776 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3777 psg
->sg
[i
].addr
= cpu_to_le32(sg_dma_address(sg
));
3778 psg
->sg
[i
].count
= cpu_to_le32(sg_dma_len(sg
));
3779 byte_count
+= sg_dma_len(sg
);
3781 /* hba wants the size to be exact */
3782 if (byte_count
> scsi_bufflen(scsicmd
)) {
3783 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3784 (byte_count
- scsi_bufflen(scsicmd
));
3785 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3786 byte_count
= scsi_bufflen(scsicmd
);
3788 /* Check for command underflow */
3789 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
3790 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3791 byte_count
, scsicmd
->underflow
);
3798 static long aac_build_sg64(struct scsi_cmnd
*scsicmd
, struct sgmap64
*psg
)
3800 struct aac_dev
*dev
;
3801 unsigned long byte_count
= 0;
3805 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
3806 // Get rid of old data
3808 psg
->sg
[0].addr
[0] = 0;
3809 psg
->sg
[0].addr
[1] = 0;
3810 psg
->sg
[0].count
= 0;
3812 nseg
= scsi_dma_map(scsicmd
);
3816 struct scatterlist
*sg
;
3819 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3820 int count
= sg_dma_len(sg
);
3821 addr
= sg_dma_address(sg
);
3822 psg
->sg
[i
].addr
[0] = cpu_to_le32(addr
& 0xffffffff);
3823 psg
->sg
[i
].addr
[1] = cpu_to_le32(addr
>>32);
3824 psg
->sg
[i
].count
= cpu_to_le32(count
);
3825 byte_count
+= count
;
3827 psg
->count
= cpu_to_le32(nseg
);
3828 /* hba wants the size to be exact */
3829 if (byte_count
> scsi_bufflen(scsicmd
)) {
3830 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3831 (byte_count
- scsi_bufflen(scsicmd
));
3832 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3833 byte_count
= scsi_bufflen(scsicmd
);
3835 /* Check for command underflow */
3836 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
3837 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3838 byte_count
, scsicmd
->underflow
);
3844 static long aac_build_sgraw(struct scsi_cmnd
*scsicmd
, struct sgmapraw
*psg
)
3846 unsigned long byte_count
= 0;
3849 // Get rid of old data
3851 psg
->sg
[0].next
= 0;
3852 psg
->sg
[0].prev
= 0;
3853 psg
->sg
[0].addr
[0] = 0;
3854 psg
->sg
[0].addr
[1] = 0;
3855 psg
->sg
[0].count
= 0;
3856 psg
->sg
[0].flags
= 0;
3858 nseg
= scsi_dma_map(scsicmd
);
3862 struct scatterlist
*sg
;
3865 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3866 int count
= sg_dma_len(sg
);
3867 u64 addr
= sg_dma_address(sg
);
3868 psg
->sg
[i
].next
= 0;
3869 psg
->sg
[i
].prev
= 0;
3870 psg
->sg
[i
].addr
[1] = cpu_to_le32((u32
)(addr
>>32));
3871 psg
->sg
[i
].addr
[0] = cpu_to_le32((u32
)(addr
& 0xffffffff));
3872 psg
->sg
[i
].count
= cpu_to_le32(count
);
3873 psg
->sg
[i
].flags
= 0;
3874 byte_count
+= count
;
3876 psg
->count
= cpu_to_le32(nseg
);
3877 /* hba wants the size to be exact */
3878 if (byte_count
> scsi_bufflen(scsicmd
)) {
3879 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3880 (byte_count
- scsi_bufflen(scsicmd
));
3881 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3882 byte_count
= scsi_bufflen(scsicmd
);
3884 /* Check for command underflow */
3885 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
3886 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3887 byte_count
, scsicmd
->underflow
);
3893 static long aac_build_sgraw2(struct scsi_cmnd
*scsicmd
,
3894 struct aac_raw_io2
*rio2
, int sg_max
)
3896 unsigned long byte_count
= 0;
3899 nseg
= scsi_dma_map(scsicmd
);
3903 struct scatterlist
*sg
;
3904 int i
, conformable
= 0;
3905 u32 min_size
= PAGE_SIZE
, cur_size
;
3907 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3908 int count
= sg_dma_len(sg
);
3909 u64 addr
= sg_dma_address(sg
);
3911 BUG_ON(i
>= sg_max
);
3912 rio2
->sge
[i
].addrHigh
= cpu_to_le32((u32
)(addr
>>32));
3913 rio2
->sge
[i
].addrLow
= cpu_to_le32((u32
)(addr
& 0xffffffff));
3914 cur_size
= cpu_to_le32(count
);
3915 rio2
->sge
[i
].length
= cur_size
;
3916 rio2
->sge
[i
].flags
= 0;
3919 rio2
->sgeFirstSize
= cur_size
;
3920 } else if (i
== 1) {
3921 rio2
->sgeNominalSize
= cur_size
;
3922 min_size
= cur_size
;
3923 } else if ((i
+1) < nseg
&& cur_size
!= rio2
->sgeNominalSize
) {
3925 if (cur_size
< min_size
)
3926 min_size
= cur_size
;
3928 byte_count
+= count
;
3931 /* hba wants the size to be exact */
3932 if (byte_count
> scsi_bufflen(scsicmd
)) {
3933 u32 temp
= le32_to_cpu(rio2
->sge
[i
-1].length
) -
3934 (byte_count
- scsi_bufflen(scsicmd
));
3935 rio2
->sge
[i
-1].length
= cpu_to_le32(temp
);
3936 byte_count
= scsi_bufflen(scsicmd
);
3939 rio2
->sgeCnt
= cpu_to_le32(nseg
);
3940 rio2
->flags
|= cpu_to_le16(RIO2_SG_FORMAT_IEEE1212
);
3941 /* not conformable: evaluate required sg elements */
3943 int j
, nseg_new
= nseg
, err_found
;
3944 for (i
= min_size
/ PAGE_SIZE
; i
>= 1; --i
) {
3947 for (j
= 1; j
< nseg
- 1; ++j
) {
3948 if (rio2
->sge
[j
].length
% (i
*PAGE_SIZE
)) {
3952 nseg_new
+= (rio2
->sge
[j
].length
/ (i
*PAGE_SIZE
));
3957 if (i
> 0 && nseg_new
<= sg_max
)
3958 aac_convert_sgraw2(rio2
, i
, nseg
, nseg_new
);
3960 rio2
->flags
|= cpu_to_le16(RIO2_SGL_CONFORMANT
);
3962 /* Check for command underflow */
3963 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
3964 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3965 byte_count
, scsicmd
->underflow
);
3972 static int aac_convert_sgraw2(struct aac_raw_io2
*rio2
, int pages
, int nseg
, int nseg_new
)
3974 struct sge_ieee1212
*sge
;
3978 if (aac_convert_sgl
== 0)
3981 sge
= kmalloc(nseg_new
* sizeof(struct sge_ieee1212
), GFP_ATOMIC
);
3985 for (i
= 1, pos
= 1; i
< nseg
-1; ++i
) {
3986 for (j
= 0; j
< rio2
->sge
[i
].length
/ (pages
* PAGE_SIZE
); ++j
) {
3987 addr_low
= rio2
->sge
[i
].addrLow
+ j
* pages
* PAGE_SIZE
;
3988 sge
[pos
].addrLow
= addr_low
;
3989 sge
[pos
].addrHigh
= rio2
->sge
[i
].addrHigh
;
3990 if (addr_low
< rio2
->sge
[i
].addrLow
)
3991 sge
[pos
].addrHigh
++;
3992 sge
[pos
].length
= pages
* PAGE_SIZE
;
3997 sge
[pos
] = rio2
->sge
[nseg
-1];
3998 memcpy(&rio2
->sge
[1], &sge
[1], (nseg_new
-1)*sizeof(struct sge_ieee1212
));
4001 rio2
->sgeCnt
= cpu_to_le32(nseg_new
);
4002 rio2
->flags
|= cpu_to_le16(RIO2_SGL_CONFORMANT
);
4003 rio2
->sgeNominalSize
= pages
* PAGE_SIZE
;
4007 static long aac_build_sghba(struct scsi_cmnd
*scsicmd
,
4008 struct aac_hba_cmd_req
*hbacmd
,
4012 unsigned long byte_count
= 0;
4014 struct scatterlist
*sg
;
4017 struct aac_hba_sgl
*sge
;
4019 nseg
= scsi_dma_map(scsicmd
);
4025 if (nseg
> HBA_MAX_SG_EMBEDDED
)
4026 sge
= &hbacmd
->sge
[2];
4028 sge
= &hbacmd
->sge
[0];
4030 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
4031 int count
= sg_dma_len(sg
);
4032 u64 addr
= sg_dma_address(sg
);
4034 WARN_ON(i
>= sg_max
);
4035 sge
->addr_hi
= cpu_to_le32((u32
)(addr
>>32));
4036 sge
->addr_lo
= cpu_to_le32((u32
)(addr
& 0xffffffff));
4037 cur_size
= cpu_to_le32(count
);
4038 sge
->len
= cur_size
;
4040 byte_count
+= count
;
4045 /* hba wants the size to be exact */
4046 if (byte_count
> scsi_bufflen(scsicmd
)) {
4049 temp
= le32_to_cpu(sge
->len
) - byte_count
4050 - scsi_bufflen(scsicmd
);
4051 sge
->len
= cpu_to_le32(temp
);
4052 byte_count
= scsi_bufflen(scsicmd
);
4055 if (nseg
<= HBA_MAX_SG_EMBEDDED
) {
4056 hbacmd
->emb_data_desc_count
= cpu_to_le32(nseg
);
4057 sge
->flags
= cpu_to_le32(0x40000000);
4060 hbacmd
->sge
[0].flags
= cpu_to_le32(0x80000000);
4061 hbacmd
->emb_data_desc_count
= (u8
)cpu_to_le32(1);
4062 hbacmd
->sge
[0].addr_hi
= (u32
)cpu_to_le32(sg_address
>> 32);
4063 hbacmd
->sge
[0].addr_lo
=
4064 cpu_to_le32((u32
)(sg_address
& 0xffffffff));
4067 /* Check for command underflow */
4068 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
4069 pr_warn("aacraid: cmd len %08lX cmd underflow %08X\n",
4070 byte_count
, scsicmd
->underflow
);
4076 #ifdef AAC_DETAILED_STATUS_INFO
4078 struct aac_srb_status_info
{
4084 static struct aac_srb_status_info srb_status_info
[] = {
4085 { SRB_STATUS_PENDING
, "Pending Status"},
4086 { SRB_STATUS_SUCCESS
, "Success"},
4087 { SRB_STATUS_ABORTED
, "Aborted Command"},
4088 { SRB_STATUS_ABORT_FAILED
, "Abort Failed"},
4089 { SRB_STATUS_ERROR
, "Error Event"},
4090 { SRB_STATUS_BUSY
, "Device Busy"},
4091 { SRB_STATUS_INVALID_REQUEST
, "Invalid Request"},
4092 { SRB_STATUS_INVALID_PATH_ID
, "Invalid Path ID"},
4093 { SRB_STATUS_NO_DEVICE
, "No Device"},
4094 { SRB_STATUS_TIMEOUT
, "Timeout"},
4095 { SRB_STATUS_SELECTION_TIMEOUT
, "Selection Timeout"},
4096 { SRB_STATUS_COMMAND_TIMEOUT
, "Command Timeout"},
4097 { SRB_STATUS_MESSAGE_REJECTED
, "Message Rejected"},
4098 { SRB_STATUS_BUS_RESET
, "Bus Reset"},
4099 { SRB_STATUS_PARITY_ERROR
, "Parity Error"},
4100 { SRB_STATUS_REQUEST_SENSE_FAILED
,"Request Sense Failed"},
4101 { SRB_STATUS_NO_HBA
, "No HBA"},
4102 { SRB_STATUS_DATA_OVERRUN
, "Data Overrun/Data Underrun"},
4103 { SRB_STATUS_UNEXPECTED_BUS_FREE
,"Unexpected Bus Free"},
4104 { SRB_STATUS_PHASE_SEQUENCE_FAILURE
,"Phase Error"},
4105 { SRB_STATUS_BAD_SRB_BLOCK_LENGTH
,"Bad Srb Block Length"},
4106 { SRB_STATUS_REQUEST_FLUSHED
, "Request Flushed"},
4107 { SRB_STATUS_DELAYED_RETRY
, "Delayed Retry"},
4108 { SRB_STATUS_INVALID_LUN
, "Invalid LUN"},
4109 { SRB_STATUS_INVALID_TARGET_ID
, "Invalid TARGET ID"},
4110 { SRB_STATUS_BAD_FUNCTION
, "Bad Function"},
4111 { SRB_STATUS_ERROR_RECOVERY
, "Error Recovery"},
4112 { SRB_STATUS_NOT_STARTED
, "Not Started"},
4113 { SRB_STATUS_NOT_IN_USE
, "Not In Use"},
4114 { SRB_STATUS_FORCE_ABORT
, "Force Abort"},
4115 { SRB_STATUS_DOMAIN_VALIDATION_FAIL
,"Domain Validation Failure"},
4116 { 0xff, "Unknown Error"}
4119 char *aac_get_status_string(u32 status
)
4123 for (i
= 0; i
< ARRAY_SIZE(srb_status_info
); i
++)
4124 if (srb_status_info
[i
].status
== status
)
4125 return srb_status_info
[i
].str
;
4127 return "Bad Status Code";