]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/scsi/aic7xxx/aic79xx_core.c
projects / mirror_ubuntu-artful-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
powerpc: pseries/dtl.c should include asm/firmware.h
[mirror_ubuntu-artful-kernel.git] / drivers / scsi / aic7xxx / aic79xx_core.c
1 /*
2 * Core routines and tables shareable across OS platforms.
3 *
4 * Copyright (c) 1994-2002 Justin T. Gibbs.
5 * Copyright (c) 2000-2003 Adaptec Inc.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification.
14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
15 * substantially similar to the "NO WARRANTY" disclaimer below
16 * ("Disclaimer") and any redistribution must be conditioned upon
17 * including a substantially similar Disclaimer requirement for further
18 * binary redistribution.
19 * 3. Neither the names of the above-listed copyright holders nor the names
20 * of any contributors may be used to endorse or promote products derived
21 * from this software without specific prior written permission.
22 *
23 * Alternatively, this software may be distributed under the terms of the
24 * GNU General Public License ("GPL") version 2 as published by the Free
25 * Software Foundation.
26 *
27 * NO WARRANTY
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
38 * POSSIBILITY OF SUCH DAMAGES.
39 *
40 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#250 $
41 */
42
43 #ifdef __linux__
44 #include "aic79xx_osm.h"
45 #include "aic79xx_inline.h"
46 #include "aicasm/aicasm_insformat.h"
47 #else
48 #include <dev/aic7xxx/aic79xx_osm.h>
49 #include <dev/aic7xxx/aic79xx_inline.h>
50 #include <dev/aic7xxx/aicasm/aicasm_insformat.h>
51 #endif
52
53
54 /***************************** Lookup Tables **********************************/
55 static const char *const ahd_chip_names[] =
56 {
57 "NONE",
58 "aic7901",
59 "aic7902",
60 "aic7901A"
61 };
62 static const u_int num_chip_names = ARRAY_SIZE(ahd_chip_names);
63
64 /*
65 * Hardware error codes.
66 */
67 struct ahd_hard_error_entry {
68 uint8_t errno;
69 const char *errmesg;
70 };
71
72 static const struct ahd_hard_error_entry ahd_hard_errors[] = {
73 { DSCTMOUT, "Discard Timer has timed out" },
74 { ILLOPCODE, "Illegal Opcode in sequencer program" },
75 { SQPARERR, "Sequencer Parity Error" },
76 { DPARERR, "Data-path Parity Error" },
77 { MPARERR, "Scratch or SCB Memory Parity Error" },
78 { CIOPARERR, "CIOBUS Parity Error" },
79 };
80 static const u_int num_errors = ARRAY_SIZE(ahd_hard_errors);
81
82 static const struct ahd_phase_table_entry ahd_phase_table[] =
83 {
84 { P_DATAOUT, MSG_NOOP, "in Data-out phase" },
85 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" },
86 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" },
87 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" },
88 { P_COMMAND, MSG_NOOP, "in Command phase" },
89 { P_MESGOUT, MSG_NOOP, "in Message-out phase" },
90 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" },
91 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" },
92 { P_BUSFREE, MSG_NOOP, "while idle" },
93 { 0, MSG_NOOP, "in unknown phase" }
94 };
95
96 /*
97 * In most cases we only wish to itterate over real phases, so
98 * exclude the last element from the count.
99 */
100 static const u_int num_phases = ARRAY_SIZE(ahd_phase_table) - 1;
101
102 /* Our Sequencer Program */
103 #include "aic79xx_seq.h"
104
105 /**************************** Function Declarations ***************************/
106 static void ahd_handle_transmission_error(struct ahd_softc *ahd);
107 static void ahd_handle_lqiphase_error(struct ahd_softc *ahd,
108 u_int lqistat1);
109 static int ahd_handle_pkt_busfree(struct ahd_softc *ahd,
110 u_int busfreetime);
111 static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd);
112 static void ahd_handle_proto_violation(struct ahd_softc *ahd);
113 static void ahd_force_renegotiation(struct ahd_softc *ahd,
114 struct ahd_devinfo *devinfo);
115
116 static struct ahd_tmode_tstate*
117 ahd_alloc_tstate(struct ahd_softc *ahd,
118 u_int scsi_id, char channel);
119 #ifdef AHD_TARGET_MODE
120 static void ahd_free_tstate(struct ahd_softc *ahd,
121 u_int scsi_id, char channel, int force);
122 #endif
123 static void ahd_devlimited_syncrate(struct ahd_softc *ahd,
124 struct ahd_initiator_tinfo *,
125 u_int *period,
126 u_int *ppr_options,
127 role_t role);
128 static void ahd_update_neg_table(struct ahd_softc *ahd,
129 struct ahd_devinfo *devinfo,
130 struct ahd_transinfo *tinfo);
131 static void ahd_update_pending_scbs(struct ahd_softc *ahd);
132 static void ahd_fetch_devinfo(struct ahd_softc *ahd,
133 struct ahd_devinfo *devinfo);
134 static void ahd_scb_devinfo(struct ahd_softc *ahd,
135 struct ahd_devinfo *devinfo,
136 struct scb *scb);
137 static void ahd_setup_initiator_msgout(struct ahd_softc *ahd,
138 struct ahd_devinfo *devinfo,
139 struct scb *scb);
140 static void ahd_build_transfer_msg(struct ahd_softc *ahd,
141 struct ahd_devinfo *devinfo);
142 static void ahd_construct_sdtr(struct ahd_softc *ahd,
143 struct ahd_devinfo *devinfo,
144 u_int period, u_int offset);
145 static void ahd_construct_wdtr(struct ahd_softc *ahd,
146 struct ahd_devinfo *devinfo,
147 u_int bus_width);
148 static void ahd_construct_ppr(struct ahd_softc *ahd,
149 struct ahd_devinfo *devinfo,
150 u_int period, u_int offset,
151 u_int bus_width, u_int ppr_options);
152 static void ahd_clear_msg_state(struct ahd_softc *ahd);
153 static void ahd_handle_message_phase(struct ahd_softc *ahd);
154 typedef enum {
155 AHDMSG_1B,
156 AHDMSG_2B,
157 AHDMSG_EXT
158 } ahd_msgtype;
159 static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type,
160 u_int msgval, int full);
161 static int ahd_parse_msg(struct ahd_softc *ahd,
162 struct ahd_devinfo *devinfo);
163 static int ahd_handle_msg_reject(struct ahd_softc *ahd,
164 struct ahd_devinfo *devinfo);
165 static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd,
166 struct ahd_devinfo *devinfo);
167 static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd);
168 static void ahd_handle_devreset(struct ahd_softc *ahd,
169 struct ahd_devinfo *devinfo,
170 u_int lun, cam_status status,
171 char *message, int verbose_level);
172 #ifdef AHD_TARGET_MODE
173 static void ahd_setup_target_msgin(struct ahd_softc *ahd,
174 struct ahd_devinfo *devinfo,
175 struct scb *scb);
176 #endif
177
178 static u_int ahd_sglist_size(struct ahd_softc *ahd);
179 static u_int ahd_sglist_allocsize(struct ahd_softc *ahd);
180 static bus_dmamap_callback_t
181 ahd_dmamap_cb;
182 static void ahd_initialize_hscbs(struct ahd_softc *ahd);
183 static int ahd_init_scbdata(struct ahd_softc *ahd);
184 static void ahd_fini_scbdata(struct ahd_softc *ahd);
185 static void ahd_setup_iocell_workaround(struct ahd_softc *ahd);
186 static void ahd_iocell_first_selection(struct ahd_softc *ahd);
187 static void ahd_add_col_list(struct ahd_softc *ahd,
188 struct scb *scb, u_int col_idx);
189 static void ahd_rem_col_list(struct ahd_softc *ahd,
190 struct scb *scb);
191 static void ahd_chip_init(struct ahd_softc *ahd);
192 static void ahd_qinfifo_requeue(struct ahd_softc *ahd,
193 struct scb *prev_scb,
194 struct scb *scb);
195 static int ahd_qinfifo_count(struct ahd_softc *ahd);
196 static int ahd_search_scb_list(struct ahd_softc *ahd, int target,
197 char channel, int lun, u_int tag,
198 role_t role, uint32_t status,
199 ahd_search_action action,
200 u_int *list_head, u_int *list_tail,
201 u_int tid);
202 static void ahd_stitch_tid_list(struct ahd_softc *ahd,
203 u_int tid_prev, u_int tid_cur,
204 u_int tid_next);
205 static void ahd_add_scb_to_free_list(struct ahd_softc *ahd,
206 u_int scbid);
207 static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
208 u_int prev, u_int next, u_int tid);
209 static void ahd_reset_current_bus(struct ahd_softc *ahd);
210 static ahd_callback_t ahd_stat_timer;
211 #ifdef AHD_DUMP_SEQ
212 static void ahd_dumpseq(struct ahd_softc *ahd);
213 #endif
214 static void ahd_loadseq(struct ahd_softc *ahd);
215 static int ahd_check_patch(struct ahd_softc *ahd,
216 const struct patch **start_patch,
217 u_int start_instr, u_int *skip_addr);
218 static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd,
219 u_int address);
220 static void ahd_download_instr(struct ahd_softc *ahd,
221 u_int instrptr, uint8_t *dconsts);
222 static int ahd_probe_stack_size(struct ahd_softc *ahd);
223 static int ahd_scb_active_in_fifo(struct ahd_softc *ahd,
224 struct scb *scb);
225 static void ahd_run_data_fifo(struct ahd_softc *ahd,
226 struct scb *scb);
227
228 #ifdef AHD_TARGET_MODE
229 static void ahd_queue_lstate_event(struct ahd_softc *ahd,
230 struct ahd_tmode_lstate *lstate,
231 u_int initiator_id,
232 u_int event_type,
233 u_int event_arg);
234 static void ahd_update_scsiid(struct ahd_softc *ahd,
235 u_int targid_mask);
236 static int ahd_handle_target_cmd(struct ahd_softc *ahd,
237 struct target_cmd *cmd);
238 #endif
239
240 static int ahd_abort_scbs(struct ahd_softc *ahd, int target,
241 char channel, int lun, u_int tag,
242 role_t role, uint32_t status);
243 static void ahd_alloc_scbs(struct ahd_softc *ahd);
244 static void ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl,
245 u_int scbid);
246 static void ahd_calc_residual(struct ahd_softc *ahd,
247 struct scb *scb);
248 static void ahd_clear_critical_section(struct ahd_softc *ahd);
249 static void ahd_clear_intstat(struct ahd_softc *ahd);
250 static void ahd_enable_coalescing(struct ahd_softc *ahd,
251 int enable);
252 static u_int ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl);
253 static void ahd_freeze_devq(struct ahd_softc *ahd,
254 struct scb *scb);
255 static void ahd_handle_scb_status(struct ahd_softc *ahd,
256 struct scb *scb);
257 static const struct ahd_phase_table_entry* ahd_lookup_phase_entry(int phase);
258 static void ahd_shutdown(void *arg);
259 static void ahd_update_coalescing_values(struct ahd_softc *ahd,
260 u_int timer,
261 u_int maxcmds,
262 u_int mincmds);
263 static int ahd_verify_vpd_cksum(struct vpd_config *vpd);
264 static int ahd_wait_seeprom(struct ahd_softc *ahd);
265 static int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb,
266 int target, char channel, int lun,
267 u_int tag, role_t role);
268
269 static void ahd_reset_cmds_pending(struct ahd_softc *ahd);
270
271 /*************************** Interrupt Services *******************************/
272 static void ahd_run_qoutfifo(struct ahd_softc *ahd);
273 #ifdef AHD_TARGET_MODE
274 static void ahd_run_tqinfifo(struct ahd_softc *ahd, int paused);
275 #endif
276 static void ahd_handle_hwerrint(struct ahd_softc *ahd);
277 static void ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat);
278 static void ahd_handle_scsiint(struct ahd_softc *ahd,
279 u_int intstat);
280
281 /************************ Sequencer Execution Control *************************/
282 void
283 ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
284 {
285 if (ahd->src_mode == src && ahd->dst_mode == dst)
286 return;
287 #ifdef AHD_DEBUG
288 if (ahd->src_mode == AHD_MODE_UNKNOWN
289 || ahd->dst_mode == AHD_MODE_UNKNOWN)
290 panic("Setting mode prior to saving it.\n");
291 if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
292 printf("%s: Setting mode 0x%x\n", ahd_name(ahd),
293 ahd_build_mode_state(ahd, src, dst));
294 #endif
295 ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst));
296 ahd->src_mode = src;
297 ahd->dst_mode = dst;
298 }
299
300 static void
301 ahd_update_modes(struct ahd_softc *ahd)
302 {
303 ahd_mode_state mode_ptr;
304 ahd_mode src;
305 ahd_mode dst;
306
307 mode_ptr = ahd_inb(ahd, MODE_PTR);
308 #ifdef AHD_DEBUG
309 if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
310 printf("Reading mode 0x%x\n", mode_ptr);
311 #endif
312 ahd_extract_mode_state(ahd, mode_ptr, &src, &dst);
313 ahd_known_modes(ahd, src, dst);
314 }
315
316 static void
317 ahd_assert_modes(struct ahd_softc *ahd, ahd_mode srcmode,
318 ahd_mode dstmode, const char *file, int line)
319 {
320 #ifdef AHD_DEBUG
321 if ((srcmode & AHD_MK_MSK(ahd->src_mode)) == 0
322 || (dstmode & AHD_MK_MSK(ahd->dst_mode)) == 0) {
323 panic("%s:%s:%d: Mode assertion failed.\n",
324 ahd_name(ahd), file, line);
325 }
326 #endif
327 }
328
329 #define AHD_ASSERT_MODES(ahd, source, dest) \
330 ahd_assert_modes(ahd, source, dest, __FILE__, __LINE__);
331
332 ahd_mode_state
333 ahd_save_modes(struct ahd_softc *ahd)
334 {
335 if (ahd->src_mode == AHD_MODE_UNKNOWN
336 || ahd->dst_mode == AHD_MODE_UNKNOWN)
337 ahd_update_modes(ahd);
338
339 return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode));
340 }
341
342 void
343 ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state)
344 {
345 ahd_mode src;
346 ahd_mode dst;
347
348 ahd_extract_mode_state(ahd, state, &src, &dst);
349 ahd_set_modes(ahd, src, dst);
350 }
351
352 /*
353 * Determine whether the sequencer has halted code execution.
354 * Returns non-zero status if the sequencer is stopped.
355 */
356 int
357 ahd_is_paused(struct ahd_softc *ahd)
358 {
359 return ((ahd_inb(ahd, HCNTRL) & PAUSE) != 0);
360 }
361
362 /*
363 * Request that the sequencer stop and wait, indefinitely, for it
364 * to stop. The sequencer will only acknowledge that it is paused
365 * once it has reached an instruction boundary and PAUSEDIS is
366 * cleared in the SEQCTL register. The sequencer may use PAUSEDIS
367 * for critical sections.
368 */
369 void
370 ahd_pause(struct ahd_softc *ahd)
371 {
372 ahd_outb(ahd, HCNTRL, ahd->pause);
373
374 /*
375 * Since the sequencer can disable pausing in a critical section, we
376 * must loop until it actually stops.
377 */
378 while (ahd_is_paused(ahd) == 0)
379 ;
380 }
381
382 /*
383 * Allow the sequencer to continue program execution.
384 * We check here to ensure that no additional interrupt
385 * sources that would cause the sequencer to halt have been
386 * asserted. If, for example, a SCSI bus reset is detected
387 * while we are fielding a different, pausing, interrupt type,
388 * we don't want to release the sequencer before going back
389 * into our interrupt handler and dealing with this new
390 * condition.
391 */
392 void
393 ahd_unpause(struct ahd_softc *ahd)
394 {
395 /*
396 * Automatically restore our modes to those saved
397 * prior to the first change of the mode.
398 */
399 if (ahd->saved_src_mode != AHD_MODE_UNKNOWN
400 && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) {
401 if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0)
402 ahd_reset_cmds_pending(ahd);
403 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
404 }
405
406 if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0)
407 ahd_outb(ahd, HCNTRL, ahd->unpause);
408
409 ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN);
410 }
411
412 /*********************** Scatter Gather List Handling *************************/
413 void *
414 ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
415 void *sgptr, dma_addr_t addr, bus_size_t len, int last)
416 {
417 scb->sg_count++;
418 if (sizeof(dma_addr_t) > 4
419 && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
420 struct ahd_dma64_seg *sg;
421
422 sg = (struct ahd_dma64_seg *)sgptr;
423 sg->addr = ahd_htole64(addr);
424 sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0));
425 return (sg + 1);
426 } else {
427 struct ahd_dma_seg *sg;
428
429 sg = (struct ahd_dma_seg *)sgptr;
430 sg->addr = ahd_htole32(addr & 0xFFFFFFFF);
431 sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000)
432 | (last ? AHD_DMA_LAST_SEG : 0));
433 return (sg + 1);
434 }
435 }
436
437 static void
438 ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb)
439 {
440 /* XXX Handle target mode SCBs. */
441 scb->crc_retry_count = 0;
442 if ((scb->flags & SCB_PACKETIZED) != 0) {
443 /* XXX what about ACA?? It is type 4, but TAG_TYPE == 0x3. */
444 scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE;
445 } else {
446 if (ahd_get_transfer_length(scb) & 0x01)
447 scb->hscb->task_attribute = SCB_XFERLEN_ODD;
448 else
449 scb->hscb->task_attribute = 0;
450 }
451
452 if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR
453 || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0)
454 scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr =
455 ahd_htole32(scb->sense_busaddr);
456 }
457
458 static void
459 ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb)
460 {
461 /*
462 * Copy the first SG into the "current" data ponter area.
463 */
464 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
465 struct ahd_dma64_seg *sg;
466
467 sg = (struct ahd_dma64_seg *)scb->sg_list;
468 scb->hscb->dataptr = sg->addr;
469 scb->hscb->datacnt = sg->len;
470 } else {
471 struct ahd_dma_seg *sg;
472 uint32_t *dataptr_words;
473
474 sg = (struct ahd_dma_seg *)scb->sg_list;
475 dataptr_words = (uint32_t*)&scb->hscb->dataptr;
476 dataptr_words[0] = sg->addr;
477 dataptr_words[1] = 0;
478 if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
479 uint64_t high_addr;
480
481 high_addr = ahd_le32toh(sg->len) & 0x7F000000;
482 scb->hscb->dataptr |= ahd_htole64(high_addr << 8);
483 }
484 scb->hscb->datacnt = sg->len;
485 }
486 /*
487 * Note where to find the SG entries in bus space.
488 * We also set the full residual flag which the
489 * sequencer will clear as soon as a data transfer
490 * occurs.
491 */
492 scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID);
493 }
494
495 static void
496 ahd_setup_noxfer_scb(struct ahd_softc *ahd, struct scb *scb)
497 {
498 scb->hscb->sgptr = ahd_htole32(SG_LIST_NULL);
499 scb->hscb->dataptr = 0;
500 scb->hscb->datacnt = 0;
501 }
502
503 /************************** Memory mapping routines ***************************/
504 static void *
505 ahd_sg_bus_to_virt(struct ahd_softc *ahd, struct scb *scb, uint32_t sg_busaddr)
506 {
507 dma_addr_t sg_offset;
508
509 /* sg_list_phys points to entry 1, not 0 */
510 sg_offset = sg_busaddr - (scb->sg_list_busaddr - ahd_sg_size(ahd));
511 return ((uint8_t *)scb->sg_list + sg_offset);
512 }
513
514 static uint32_t
515 ahd_sg_virt_to_bus(struct ahd_softc *ahd, struct scb *scb, void *sg)
516 {
517 dma_addr_t sg_offset;
518
519 /* sg_list_phys points to entry 1, not 0 */
520 sg_offset = ((uint8_t *)sg - (uint8_t *)scb->sg_list)
521 - ahd_sg_size(ahd);
522
523 return (scb->sg_list_busaddr + sg_offset);
524 }
525
526 static void
527 ahd_sync_scb(struct ahd_softc *ahd, struct scb *scb, int op)
528 {
529 ahd_dmamap_sync(ahd, ahd->scb_data.hscb_dmat,
530 scb->hscb_map->dmamap,
531 /*offset*/(uint8_t*)scb->hscb - scb->hscb_map->vaddr,
532 /*len*/sizeof(*scb->hscb), op);
533 }
534
535 void
536 ahd_sync_sglist(struct ahd_softc *ahd, struct scb *scb, int op)
537 {
538 if (scb->sg_count == 0)
539 return;
540
541 ahd_dmamap_sync(ahd, ahd->scb_data.sg_dmat,
542 scb->sg_map->dmamap,
543 /*offset*/scb->sg_list_busaddr - ahd_sg_size(ahd),
544 /*len*/ahd_sg_size(ahd) * scb->sg_count, op);
545 }
546
547 static void
548 ahd_sync_sense(struct ahd_softc *ahd, struct scb *scb, int op)
549 {
550 ahd_dmamap_sync(ahd, ahd->scb_data.sense_dmat,
551 scb->sense_map->dmamap,
552 /*offset*/scb->sense_busaddr,
553 /*len*/AHD_SENSE_BUFSIZE, op);
554 }
555
556 #ifdef AHD_TARGET_MODE
557 static uint32_t
558 ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index)
559 {
560 return (((uint8_t *)&ahd->targetcmds[index])
561 - (uint8_t *)ahd->qoutfifo);
562 }
563 #endif
564
565 /*********************** Miscelaneous Support Functions ***********************/
566 /*
567 * Return pointers to the transfer negotiation information
568 * for the specified our_id/remote_id pair.
569 */
570 struct ahd_initiator_tinfo *
571 ahd_fetch_transinfo(struct ahd_softc *ahd, char channel, u_int our_id,
572 u_int remote_id, struct ahd_tmode_tstate **tstate)
573 {
574 /*
575 * Transfer data structures are stored from the perspective
576 * of the target role. Since the parameters for a connection
577 * in the initiator role to a given target are the same as
578 * when the roles are reversed, we pretend we are the target.
579 */
580 if (channel == 'B')
581 our_id += 8;
582 *tstate = ahd->enabled_targets[our_id];
583 return (&(*tstate)->transinfo[remote_id]);
584 }
585
586 uint16_t
587 ahd_inw(struct ahd_softc *ahd, u_int port)
588 {
589 /*
590 * Read high byte first as some registers increment
591 * or have other side effects when the low byte is
592 * read.
593 */
594 uint16_t r = ahd_inb(ahd, port+1) << 8;
595 return r | ahd_inb(ahd, port);
596 }
597
598 void
599 ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
600 {
601 /*
602 * Write low byte first to accomodate registers
603 * such as PRGMCNT where the order maters.
604 */
605 ahd_outb(ahd, port, value & 0xFF);
606 ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
607 }
608
609 uint32_t
610 ahd_inl(struct ahd_softc *ahd, u_int port)
611 {
612 return ((ahd_inb(ahd, port))
613 | (ahd_inb(ahd, port+1) << 8)
614 | (ahd_inb(ahd, port+2) << 16)
615 | (ahd_inb(ahd, port+3) << 24));
616 }
617
618 void
619 ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value)
620 {
621 ahd_outb(ahd, port, (value) & 0xFF);
622 ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF);
623 ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF);
624 ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF);
625 }
626
627 uint64_t
628 ahd_inq(struct ahd_softc *ahd, u_int port)
629 {
630 return ((ahd_inb(ahd, port))
631 | (ahd_inb(ahd, port+1) << 8)
632 | (ahd_inb(ahd, port+2) << 16)
633 | (ahd_inb(ahd, port+3) << 24)
634 | (((uint64_t)ahd_inb(ahd, port+4)) << 32)
635 | (((uint64_t)ahd_inb(ahd, port+5)) << 40)
636 | (((uint64_t)ahd_inb(ahd, port+6)) << 48)
637 | (((uint64_t)ahd_inb(ahd, port+7)) << 56));
638 }
639
640 void
641 ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value)
642 {
643 ahd_outb(ahd, port, value & 0xFF);
644 ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
645 ahd_outb(ahd, port+2, (value >> 16) & 0xFF);
646 ahd_outb(ahd, port+3, (value >> 24) & 0xFF);
647 ahd_outb(ahd, port+4, (value >> 32) & 0xFF);
648 ahd_outb(ahd, port+5, (value >> 40) & 0xFF);
649 ahd_outb(ahd, port+6, (value >> 48) & 0xFF);
650 ahd_outb(ahd, port+7, (value >> 56) & 0xFF);
651 }
652
653 u_int
654 ahd_get_scbptr(struct ahd_softc *ahd)
655 {
656 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
657 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
658 return (ahd_inb(ahd, SCBPTR) | (ahd_inb(ahd, SCBPTR + 1) << 8));
659 }
660
661 void
662 ahd_set_scbptr(struct ahd_softc *ahd, u_int scbptr)
663 {
664 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
665 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
666 ahd_outb(ahd, SCBPTR, scbptr & 0xFF);
667 ahd_outb(ahd, SCBPTR+1, (scbptr >> 8) & 0xFF);
668 }
669
670 #if 0 /* unused */
671 static u_int
672 ahd_get_hnscb_qoff(struct ahd_softc *ahd)
673 {
674 return (ahd_inw_atomic(ahd, HNSCB_QOFF));
675 }
676 #endif
677
678 static void
679 ahd_set_hnscb_qoff(struct ahd_softc *ahd, u_int value)
680 {
681 ahd_outw_atomic(ahd, HNSCB_QOFF, value);
682 }
683
684 #if 0 /* unused */
685 static u_int
686 ahd_get_hescb_qoff(struct ahd_softc *ahd)
687 {
688 return (ahd_inb(ahd, HESCB_QOFF));
689 }
690 #endif
691
692 static void
693 ahd_set_hescb_qoff(struct ahd_softc *ahd, u_int value)
694 {
695 ahd_outb(ahd, HESCB_QOFF, value);
696 }
697
698 static u_int
699 ahd_get_snscb_qoff(struct ahd_softc *ahd)
700 {
701 u_int oldvalue;
702
703 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
704 oldvalue = ahd_inw(ahd, SNSCB_QOFF);
705 ahd_outw(ahd, SNSCB_QOFF, oldvalue);
706 return (oldvalue);
707 }
708
709 static void
710 ahd_set_snscb_qoff(struct ahd_softc *ahd, u_int value)
711 {
712 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
713 ahd_outw(ahd, SNSCB_QOFF, value);
714 }
715
716 #if 0 /* unused */
717 static u_int
718 ahd_get_sescb_qoff(struct ahd_softc *ahd)
719 {
720 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
721 return (ahd_inb(ahd, SESCB_QOFF));
722 }
723 #endif
724
725 static void
726 ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value)
727 {
728 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
729 ahd_outb(ahd, SESCB_QOFF, value);
730 }
731
732 #if 0 /* unused */
733 static u_int
734 ahd_get_sdscb_qoff(struct ahd_softc *ahd)
735 {
736 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
737 return (ahd_inb(ahd, SDSCB_QOFF) | (ahd_inb(ahd, SDSCB_QOFF + 1) << 8));
738 }
739 #endif
740
741 static void
742 ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value)
743 {
744 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
745 ahd_outb(ahd, SDSCB_QOFF, value & 0xFF);
746 ahd_outb(ahd, SDSCB_QOFF+1, (value >> 8) & 0xFF);
747 }
748
749 u_int
750 ahd_inb_scbram(struct ahd_softc *ahd, u_int offset)
751 {
752 u_int value;
753
754 /*
755 * Workaround PCI-X Rev A. hardware bug.
756 * After a host read of SCB memory, the chip
757 * may become confused into thinking prefetch
758 * was required. This starts the discard timer
759 * running and can cause an unexpected discard
760 * timer interrupt. The work around is to read
761 * a normal register prior to the exhaustion of
762 * the discard timer. The mode pointer register
763 * has no side effects and so serves well for
764 * this purpose.
765 *
766 * Razor #528
767 */
768 value = ahd_inb(ahd, offset);
769 if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0)
770 ahd_inb(ahd, MODE_PTR);
771 return (value);
772 }
773
774 u_int
775 ahd_inw_scbram(struct ahd_softc *ahd, u_int offset)
776 {
777 return (ahd_inb_scbram(ahd, offset)
778 | (ahd_inb_scbram(ahd, offset+1) << 8));
779 }
780
781 static uint32_t
782 ahd_inl_scbram(struct ahd_softc *ahd, u_int offset)
783 {
784 return (ahd_inw_scbram(ahd, offset)
785 | (ahd_inw_scbram(ahd, offset+2) << 16));
786 }
787
788 static uint64_t
789 ahd_inq_scbram(struct ahd_softc *ahd, u_int offset)
790 {
791 return (ahd_inl_scbram(ahd, offset)
792 | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32);
793 }
794
795 struct scb *
796 ahd_lookup_scb(struct ahd_softc *ahd, u_int tag)
797 {
798 struct scb* scb;
799
800 if (tag >= AHD_SCB_MAX)
801 return (NULL);
802 scb = ahd->scb_data.scbindex[tag];
803 if (scb != NULL)
804 ahd_sync_scb(ahd, scb,
805 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
806 return (scb);
807 }
808
809 static void
810 ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb)
811 {
812 struct hardware_scb *q_hscb;
813 struct map_node *q_hscb_map;
814 uint32_t saved_hscb_busaddr;
815
816 /*
817 * Our queuing method is a bit tricky. The card
818 * knows in advance which HSCB (by address) to download,
819 * and we can't disappoint it. To achieve this, the next
820 * HSCB to download is saved off in ahd->next_queued_hscb.
821 * When we are called to queue "an arbitrary scb",
822 * we copy the contents of the incoming HSCB to the one
823 * the sequencer knows about, swap HSCB pointers and
824 * finally assign the SCB to the tag indexed location
825 * in the scb_array. This makes sure that we can still
826 * locate the correct SCB by SCB_TAG.
827 */
828 q_hscb = ahd->next_queued_hscb;
829 q_hscb_map = ahd->next_queued_hscb_map;
830 saved_hscb_busaddr = q_hscb->hscb_busaddr;
831 memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
832 q_hscb->hscb_busaddr = saved_hscb_busaddr;
833 q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
834
835 /* Now swap HSCB pointers. */
836 ahd->next_queued_hscb = scb->hscb;
837 ahd->next_queued_hscb_map = scb->hscb_map;
838 scb->hscb = q_hscb;
839 scb->hscb_map = q_hscb_map;
840
841 /* Now define the mapping from tag to SCB in the scbindex */
842 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
843 }
844
845 /*
846 * Tell the sequencer about a new transaction to execute.
847 */
848 void
849 ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb)
850 {
851 ahd_swap_with_next_hscb(ahd, scb);
852
853 if (SCBID_IS_NULL(SCB_GET_TAG(scb)))
854 panic("Attempt to queue invalid SCB tag %x\n",
855 SCB_GET_TAG(scb));
856
857 /*
858 * Keep a history of SCBs we've downloaded in the qinfifo.
859 */
860 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
861 ahd->qinfifonext++;
862
863 if (scb->sg_count != 0)
864 ahd_setup_data_scb(ahd, scb);
865 else
866 ahd_setup_noxfer_scb(ahd, scb);
867 ahd_setup_scb_common(ahd, scb);
868
869 /*
870 * Make sure our data is consistent from the
871 * perspective of the adapter.
872 */
873 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
874
875 #ifdef AHD_DEBUG
876 if ((ahd_debug & AHD_SHOW_QUEUE) != 0) {
877 uint64_t host_dataptr;
878
879 host_dataptr = ahd_le64toh(scb->hscb->dataptr);
880 printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
881 ahd_name(ahd),
882 SCB_GET_TAG(scb), scb->hscb->scsiid,
883 ahd_le32toh(scb->hscb->hscb_busaddr),
884 (u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
885 (u_int)(host_dataptr & 0xFFFFFFFF),
886 ahd_le32toh(scb->hscb->datacnt));
887 }
888 #endif
889 /* Tell the adapter about the newly queued SCB */
890 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
891 }
892
893 /************************** Interrupt Processing ******************************/
894 static void
895 ahd_sync_qoutfifo(struct ahd_softc *ahd, int op)
896 {
897 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
898 /*offset*/0,
899 /*len*/AHD_SCB_MAX * sizeof(struct ahd_completion), op);
900 }
901
902 static void
903 ahd_sync_tqinfifo(struct ahd_softc *ahd, int op)
904 {
905 #ifdef AHD_TARGET_MODE
906 if ((ahd->flags & AHD_TARGETROLE) != 0) {
907 ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
908 ahd->shared_data_map.dmamap,
909 ahd_targetcmd_offset(ahd, 0),
910 sizeof(struct target_cmd) * AHD_TMODE_CMDS,
911 op);
912 }
913 #endif
914 }
915
916 /*
917 * See if the firmware has posted any completed commands
918 * into our in-core command complete fifos.
919 */
920 #define AHD_RUN_QOUTFIFO 0x1
921 #define AHD_RUN_TQINFIFO 0x2
922 static u_int
923 ahd_check_cmdcmpltqueues(struct ahd_softc *ahd)
924 {
925 u_int retval;
926
927 retval = 0;
928 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
929 /*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo),
930 /*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD);
931 if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag
932 == ahd->qoutfifonext_valid_tag)
933 retval |= AHD_RUN_QOUTFIFO;
934 #ifdef AHD_TARGET_MODE
935 if ((ahd->flags & AHD_TARGETROLE) != 0
936 && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) {
937 ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
938 ahd->shared_data_map.dmamap,
939 ahd_targetcmd_offset(ahd, ahd->tqinfifofnext),
940 /*len*/sizeof(struct target_cmd),
941 BUS_DMASYNC_POSTREAD);
942 if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0)
943 retval |= AHD_RUN_TQINFIFO;
944 }
945 #endif
946 return (retval);
947 }
948
949 /*
950 * Catch an interrupt from the adapter
951 */
952 int
953 ahd_intr(struct ahd_softc *ahd)
954 {
955 u_int intstat;
956
957 if ((ahd->pause & INTEN) == 0) {
958 /*
959 * Our interrupt is not enabled on the chip
960 * and may be disabled for re-entrancy reasons,
961 * so just return. This is likely just a shared
962 * interrupt.
963 */
964 return (0);
965 }
966
967 /*
968 * Instead of directly reading the interrupt status register,
969 * infer the cause of the interrupt by checking our in-core
970 * completion queues. This avoids a costly PCI bus read in
971 * most cases.
972 */
973 if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0
974 && (ahd_check_cmdcmpltqueues(ahd) != 0))
975 intstat = CMDCMPLT;
976 else
977 intstat = ahd_inb(ahd, INTSTAT);
978
979 if ((intstat & INT_PEND) == 0)
980 return (0);
981
982 if (intstat & CMDCMPLT) {
983 ahd_outb(ahd, CLRINT, CLRCMDINT);
984
985 /*
986 * Ensure that the chip sees that we've cleared
987 * this interrupt before we walk the output fifo.
988 * Otherwise, we may, due to posted bus writes,
989 * clear the interrupt after we finish the scan,
990 * and after the sequencer has added new entries
991 * and asserted the interrupt again.
992 */
993 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
994 if (ahd_is_paused(ahd)) {
995 /*
996 * Potentially lost SEQINT.
997 * If SEQINTCODE is non-zero,
998 * simulate the SEQINT.
999 */
1000 if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT)
1001 intstat |= SEQINT;
1002 }
1003 } else {
1004 ahd_flush_device_writes(ahd);
1005 }
1006 ahd_run_qoutfifo(ahd);
1007 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++;
1008 ahd->cmdcmplt_total++;
1009 #ifdef AHD_TARGET_MODE
1010 if ((ahd->flags & AHD_TARGETROLE) != 0)
1011 ahd_run_tqinfifo(ahd, /*paused*/FALSE);
1012 #endif
1013 }
1014
1015 /*
1016 * Handle statuses that may invalidate our cached
1017 * copy of INTSTAT separately.
1018 */
1019 if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) {
1020 /* Hot eject. Do nothing */
1021 } else if (intstat & HWERRINT) {
1022 ahd_handle_hwerrint(ahd);
1023 } else if ((intstat & (PCIINT|SPLTINT)) != 0) {
1024 ahd->bus_intr(ahd);
1025 } else {
1026
1027 if ((intstat & SEQINT) != 0)
1028 ahd_handle_seqint(ahd, intstat);
1029
1030 if ((intstat & SCSIINT) != 0)
1031 ahd_handle_scsiint(ahd, intstat);
1032 }
1033 return (1);
1034 }
1035
1036 /******************************** Private Inlines *****************************/
1037 static __inline void
1038 ahd_assert_atn(struct ahd_softc *ahd)
1039 {
1040 ahd_outb(ahd, SCSISIGO, ATNO);
1041 }
1042
1043 /*
1044 * Determine if the current connection has a packetized
1045 * agreement. This does not necessarily mean that we
1046 * are currently in a packetized transfer. We could
1047 * just as easily be sending or receiving a message.
1048 */
1049 static int
1050 ahd_currently_packetized(struct ahd_softc *ahd)
1051 {
1052 ahd_mode_state saved_modes;
1053 int packetized;
1054
1055 saved_modes = ahd_save_modes(ahd);
1056 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) {
1057 /*
1058 * The packetized bit refers to the last
1059 * connection, not the current one. Check
1060 * for non-zero LQISTATE instead.
1061 */
1062 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
1063 packetized = ahd_inb(ahd, LQISTATE) != 0;
1064 } else {
1065 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1066 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED;
1067 }
1068 ahd_restore_modes(ahd, saved_modes);
1069 return (packetized);
1070 }
1071
1072 static __inline int
1073 ahd_set_active_fifo(struct ahd_softc *ahd)
1074 {
1075 u_int active_fifo;
1076
1077 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
1078 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
1079 switch (active_fifo) {
1080 case 0:
1081 case 1:
1082 ahd_set_modes(ahd, active_fifo, active_fifo);
1083 return (1);
1084 default:
1085 return (0);
1086 }
1087 }
1088
1089 static __inline void
1090 ahd_unbusy_tcl(struct ahd_softc *ahd, u_int tcl)
1091 {
1092 ahd_busy_tcl(ahd, tcl, SCB_LIST_NULL);
1093 }
1094
1095 /*
1096 * Determine whether the sequencer reported a residual
1097 * for this SCB/transaction.
1098 */
1099 static __inline void
1100 ahd_update_residual(struct ahd_softc *ahd, struct scb *scb)
1101 {
1102 uint32_t sgptr;
1103
1104 sgptr = ahd_le32toh(scb->hscb->sgptr);
1105 if ((sgptr & SG_STATUS_VALID) != 0)
1106 ahd_calc_residual(ahd, scb);
1107 }
1108
1109 static __inline void
1110 ahd_complete_scb(struct ahd_softc *ahd, struct scb *scb)
1111 {
1112 uint32_t sgptr;
1113
1114 sgptr = ahd_le32toh(scb->hscb->sgptr);
1115 if ((sgptr & SG_STATUS_VALID) != 0)
1116 ahd_handle_scb_status(ahd, scb);
1117 else
1118 ahd_done(ahd, scb);
1119 }
1120
1121
1122 /************************* Sequencer Execution Control ************************/
1123 /*
1124 * Restart the sequencer program from address zero
1125 */
1126 static void
1127 ahd_restart(struct ahd_softc *ahd)
1128 {
1129
1130 ahd_pause(ahd);
1131
1132 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1133
1134 /* No more pending messages */
1135 ahd_clear_msg_state(ahd);
1136 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */
1137 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */
1138 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET);
1139 ahd_outb(ahd, SEQINTCTL, 0);
1140 ahd_outb(ahd, LASTPHASE, P_BUSFREE);
1141 ahd_outb(ahd, SEQ_FLAGS, 0);
1142 ahd_outb(ahd, SAVED_SCSIID, 0xFF);
1143 ahd_outb(ahd, SAVED_LUN, 0xFF);
1144
1145 /*
1146 * Ensure that the sequencer's idea of TQINPOS
1147 * matches our own. The sequencer increments TQINPOS
1148 * only after it sees a DMA complete and a reset could
1149 * occur before the increment leaving the kernel to believe
1150 * the command arrived but the sequencer to not.
1151 */
1152 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);
1153
1154 /* Always allow reselection */
1155 ahd_outb(ahd, SCSISEQ1,
1156 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP));
1157 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
1158
1159 /*
1160 * Clear any pending sequencer interrupt. It is no
1161 * longer relevant since we're resetting the Program
1162 * Counter.
1163 */
1164 ahd_outb(ahd, CLRINT, CLRSEQINT);
1165
1166 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
1167 ahd_unpause(ahd);
1168 }
1169
1170 static void
1171 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo)
1172 {
1173 ahd_mode_state saved_modes;
1174
1175 #ifdef AHD_DEBUG
1176 if ((ahd_debug & AHD_SHOW_FIFOS) != 0)
1177 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo);
1178 #endif
1179 saved_modes = ahd_save_modes(ahd);
1180 ahd_set_modes(ahd, fifo, fifo);
1181 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
1182 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
1183 ahd_outb(ahd, CCSGCTL, CCSGRESET);
1184 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
1185 ahd_outb(ahd, SG_STATE, 0);
1186 ahd_restore_modes(ahd, saved_modes);
1187 }
1188
1189 /************************* Input/Output Queues ********************************/
1190 /*
1191 * Flush and completed commands that are sitting in the command
1192 * complete queues down on the chip but have yet to be dma'ed back up.
1193 */
1194 static void
1195 ahd_flush_qoutfifo(struct ahd_softc *ahd)
1196 {
1197 struct scb *scb;
1198 ahd_mode_state saved_modes;
1199 u_int saved_scbptr;
1200 u_int ccscbctl;
1201 u_int scbid;
1202 u_int next_scbid;
1203
1204 saved_modes = ahd_save_modes(ahd);
1205
1206 /*
1207 * Flush the good status FIFO for completed packetized commands.
1208 */
1209 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1210 saved_scbptr = ahd_get_scbptr(ahd);
1211 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) {
1212 u_int fifo_mode;
1213 u_int i;
1214
1215 scbid = ahd_inw(ahd, GSFIFO);
1216 scb = ahd_lookup_scb(ahd, scbid);
1217 if (scb == NULL) {
1218 printf("%s: Warning - GSFIFO SCB %d invalid\n",
1219 ahd_name(ahd), scbid);
1220 continue;
1221 }
1222 /*
1223 * Determine if this transaction is still active in
1224 * any FIFO. If it is, we must flush that FIFO to
1225 * the host before completing the command.
1226 */
1227 fifo_mode = 0;
1228 rescan_fifos:
1229 for (i = 0; i < 2; i++) {
1230 /* Toggle to the other mode. */
1231 fifo_mode ^= 1;
1232 ahd_set_modes(ahd, fifo_mode, fifo_mode);
1233
1234 if (ahd_scb_active_in_fifo(ahd, scb) == 0)
1235 continue;
1236
1237 ahd_run_data_fifo(ahd, scb);
1238
1239 /*
1240 * Running this FIFO may cause a CFG4DATA for
1241 * this same transaction to assert in the other
1242 * FIFO or a new snapshot SAVEPTRS interrupt
1243 * in this FIFO. Even running a FIFO may not
1244 * clear the transaction if we are still waiting
1245 * for data to drain to the host. We must loop
1246 * until the transaction is not active in either
1247 * FIFO just to be sure. Reset our loop counter
1248 * so we will visit both FIFOs again before
1249 * declaring this transaction finished. We
1250 * also delay a bit so that status has a chance
1251 * to change before we look at this FIFO again.
1252 */
1253 ahd_delay(200);
1254 goto rescan_fifos;
1255 }
1256 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1257 ahd_set_scbptr(ahd, scbid);
1258 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0
1259 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0
1260 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR)
1261 & SG_LIST_NULL) != 0)) {
1262 u_int comp_head;
1263
1264 /*
1265 * The transfer completed with a residual.
1266 * Place this SCB on the complete DMA list
1267 * so that we update our in-core copy of the
1268 * SCB before completing the command.
1269 */
1270 ahd_outb(ahd, SCB_SCSI_STATUS, 0);
1271 ahd_outb(ahd, SCB_SGPTR,
1272 ahd_inb_scbram(ahd, SCB_SGPTR)
1273 | SG_STATUS_VALID);
1274 ahd_outw(ahd, SCB_TAG, scbid);
1275 ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL);
1276 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
1277 if (SCBID_IS_NULL(comp_head)) {
1278 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid);
1279 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid);
1280 } else {
1281 u_int tail;
1282
1283 tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL);
1284 ahd_set_scbptr(ahd, tail);
1285 ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid);
1286 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid);
1287 ahd_set_scbptr(ahd, scbid);
1288 }
1289 } else
1290 ahd_complete_scb(ahd, scb);
1291 }
1292 ahd_set_scbptr(ahd, saved_scbptr);
1293
1294 /*
1295 * Setup for command channel portion of flush.
1296 */
1297 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
1298
1299 /*
1300 * Wait for any inprogress DMA to complete and clear DMA state
1301 * if this if for an SCB in the qinfifo.
1302 */
1303 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) {
1304
1305 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) {
1306 if ((ccscbctl & ARRDONE) != 0)
1307 break;
1308 } else if ((ccscbctl & CCSCBDONE) != 0)
1309 break;
1310 ahd_delay(200);
1311 }
1312 /*
1313 * We leave the sequencer to cleanup in the case of DMA's to
1314 * update the qoutfifo. In all other cases (DMA's to the
1315 * chip or a push of an SCB from the COMPLETE_DMA_SCB list),
1316 * we disable the DMA engine so that the sequencer will not
1317 * attempt to handle the DMA completion.
1318 */
1319 if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0)
1320 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN));
1321
1322 /*
1323 * Complete any SCBs that just finished
1324 * being DMA'ed into the qoutfifo.
1325 */
1326 ahd_run_qoutfifo(ahd);
1327
1328 saved_scbptr = ahd_get_scbptr(ahd);
1329 /*
1330 * Manually update/complete any completed SCBs that are waiting to be
1331 * DMA'ed back up to the host.
1332 */
1333 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
1334 while (!SCBID_IS_NULL(scbid)) {
1335 uint8_t *hscb_ptr;
1336 u_int i;
1337
1338 ahd_set_scbptr(ahd, scbid);
1339 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
1340 scb = ahd_lookup_scb(ahd, scbid);
1341 if (scb == NULL) {
1342 printf("%s: Warning - DMA-up and complete "
1343 "SCB %d invalid\n", ahd_name(ahd), scbid);
1344 continue;
1345 }
1346 hscb_ptr = (uint8_t *)scb->hscb;
1347 for (i = 0; i < sizeof(struct hardware_scb); i++)
1348 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i);
1349
1350 ahd_complete_scb(ahd, scb);
1351 scbid = next_scbid;
1352 }
1353 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
1354 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL);
1355
1356 scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD);
1357 while (!SCBID_IS_NULL(scbid)) {
1358
1359 ahd_set_scbptr(ahd, scbid);
1360 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
1361 scb = ahd_lookup_scb(ahd, scbid);
1362 if (scb == NULL) {
1363 printf("%s: Warning - Complete Qfrz SCB %d invalid\n",
1364 ahd_name(ahd), scbid);
1365 continue;
1366 }
1367
1368 ahd_complete_scb(ahd, scb);
1369 scbid = next_scbid;
1370 }
1371 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL);
1372
1373 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD);
1374 while (!SCBID_IS_NULL(scbid)) {
1375
1376 ahd_set_scbptr(ahd, scbid);
1377 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
1378 scb = ahd_lookup_scb(ahd, scbid);
1379 if (scb == NULL) {
1380 printf("%s: Warning - Complete SCB %d invalid\n",
1381 ahd_name(ahd), scbid);
1382 continue;
1383 }
1384
1385 ahd_complete_scb(ahd, scb);
1386 scbid = next_scbid;
1387 }
1388 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);
1389
1390 /*
1391 * Restore state.
1392 */
1393 ahd_set_scbptr(ahd, saved_scbptr);
1394 ahd_restore_modes(ahd, saved_modes);
1395 ahd->flags |= AHD_UPDATE_PEND_CMDS;
1396 }
1397
1398 /*
1399 * Determine if an SCB for a packetized transaction
1400 * is active in a FIFO.
1401 */
1402 static int
1403 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb)
1404 {
1405
1406 /*
1407 * The FIFO is only active for our transaction if
1408 * the SCBPTR matches the SCB's ID and the firmware
1409 * has installed a handler for the FIFO or we have
1410 * a pending SAVEPTRS or CFG4DATA interrupt.
1411 */
1412 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb)
1413 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0
1414 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0))
1415 return (0);
1416
1417 return (1);
1418 }
1419
1420 /*
1421 * Run a data fifo to completion for a transaction we know
1422 * has completed across the SCSI bus (good status has been
1423 * received). We are already set to the correct FIFO mode
1424 * on entry to this routine.
1425 *
1426 * This function attempts to operate exactly as the firmware
1427 * would when running this FIFO. Care must be taken to update
1428 * this routine any time the firmware's FIFO algorithm is
1429 * changed.
1430 */
1431 static void
1432 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb)
1433 {
1434 u_int seqintsrc;
1435
1436 seqintsrc = ahd_inb(ahd, SEQINTSRC);
1437 if ((seqintsrc & CFG4DATA) != 0) {
1438 uint32_t datacnt;
1439 uint32_t sgptr;
1440
1441 /*
1442 * Clear full residual flag.
1443 */
1444 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID;
1445 ahd_outb(ahd, SCB_SGPTR, sgptr);
1446
1447 /*
1448 * Load datacnt and address.
1449 */
1450 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT);
1451 if ((datacnt & AHD_DMA_LAST_SEG) != 0) {
1452 sgptr |= LAST_SEG;
1453 ahd_outb(ahd, SG_STATE, 0);
1454 } else
1455 ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
1456 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR));
1457 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK);
1458 ahd_outb(ahd, SG_CACHE_PRE, sgptr);
1459 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
1460
1461 /*
1462 * Initialize Residual Fields.
1463 */
1464 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24);
1465 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK);
1466
1467 /*
1468 * Mark the SCB as having a FIFO in use.
1469 */
1470 ahd_outb(ahd, SCB_FIFO_USE_COUNT,
1471 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1);
1472
1473 /*
1474 * Install a "fake" handler for this FIFO.
1475 */
1476 ahd_outw(ahd, LONGJMP_ADDR, 0);
1477
1478 /*
1479 * Notify the hardware that we have satisfied
1480 * this sequencer interrupt.
1481 */
1482 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA);
1483 } else if ((seqintsrc & SAVEPTRS) != 0) {
1484 uint32_t sgptr;
1485 uint32_t resid;
1486
1487 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) {
1488 /*
1489 * Snapshot Save Pointers. All that
1490 * is necessary to clear the snapshot
1491 * is a CLRCHN.
1492 */
1493 goto clrchn;
1494 }
1495
1496 /*
1497 * Disable S/G fetch so the DMA engine
1498 * is available to future users.
1499 */
1500 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
1501 ahd_outb(ahd, CCSGCTL, 0);
1502 ahd_outb(ahd, SG_STATE, 0);
1503
1504 /*
1505 * Flush the data FIFO. Strickly only
1506 * necessary for Rev A parts.
1507 */
1508 ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH);
1509
1510 /*
1511 * Calculate residual.
1512 */
1513 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
1514 resid = ahd_inl(ahd, SHCNT);
1515 resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24;
1516 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid);
1517 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) {
1518 /*
1519 * Must back up to the correct S/G element.
1520 * Typically this just means resetting our
1521 * low byte to the offset in the SG_CACHE,
1522 * but if we wrapped, we have to correct
1523 * the other bytes of the sgptr too.
1524 */
1525 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0
1526 && (sgptr & 0x80) == 0)
1527 sgptr -= 0x100;
1528 sgptr &= ~0xFF;
1529 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW)
1530 & SG_ADDR_MASK;
1531 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
1532 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0);
1533 } else if ((resid & AHD_SG_LEN_MASK) == 0) {
1534 ahd_outb(ahd, SCB_RESIDUAL_SGPTR,
1535 sgptr | SG_LIST_NULL);
1536 }
1537 /*
1538 * Save Pointers.
1539 */
1540 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR));
1541 ahd_outl(ahd, SCB_DATACNT, resid);
1542 ahd_outl(ahd, SCB_SGPTR, sgptr);
1543 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS);
1544 ahd_outb(ahd, SEQIMODE,
1545 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS);
1546 /*
1547 * If the data is to the SCSI bus, we are
1548 * done, otherwise wait for FIFOEMP.
1549 */
1550 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0)
1551 goto clrchn;
1552 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) {
1553 uint32_t sgptr;
1554 uint64_t data_addr;
1555 uint32_t data_len;
1556 u_int dfcntrl;
1557
1558 /*
1559 * Disable S/G fetch so the DMA engine
1560 * is available to future users. We won't
1561 * be using the DMA engine to load segments.
1562 */
1563 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) {
1564 ahd_outb(ahd, CCSGCTL, 0);
1565 ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
1566 }
1567
1568 /*
1569 * Wait for the DMA engine to notice that the
1570 * host transfer is enabled and that there is
1571 * space in the S/G FIFO for new segments before
1572 * loading more segments.
1573 */
1574 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0
1575 && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) {
1576
1577 /*
1578 * Determine the offset of the next S/G
1579 * element to load.
1580 */
1581 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
1582 sgptr &= SG_PTR_MASK;
1583 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
1584 struct ahd_dma64_seg *sg;
1585
1586 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
1587 data_addr = sg->addr;
1588 data_len = sg->len;
1589 sgptr += sizeof(*sg);
1590 } else {
1591 struct ahd_dma_seg *sg;
1592
1593 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
1594 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK;
1595 data_addr <<= 8;
1596 data_addr |= sg->addr;
1597 data_len = sg->len;
1598 sgptr += sizeof(*sg);
1599 }
1600
1601 /*
1602 * Update residual information.
1603 */
1604 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24);
1605 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
1606
1607 /*
1608 * Load the S/G.
1609 */
1610 if (data_len & AHD_DMA_LAST_SEG) {
1611 sgptr |= LAST_SEG;
1612 ahd_outb(ahd, SG_STATE, 0);
1613 }
1614 ahd_outq(ahd, HADDR, data_addr);
1615 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK);
1616 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF);
1617
1618 /*
1619 * Advertise the segment to the hardware.
1620 */
1621 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN;
1622 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) {
1623 /*
1624 * Use SCSIENWRDIS so that SCSIEN
1625 * is never modified by this
1626 * operation.
1627 */
1628 dfcntrl |= SCSIENWRDIS;
1629 }
1630 ahd_outb(ahd, DFCNTRL, dfcntrl);
1631 }
1632 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) {
1633
1634 /*
1635 * Transfer completed to the end of SG list
1636 * and has flushed to the host.
1637 */
1638 ahd_outb(ahd, SCB_SGPTR,
1639 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL);
1640 goto clrchn;
1641 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) {
1642 clrchn:
1643 /*
1644 * Clear any handler for this FIFO, decrement
1645 * the FIFO use count for the SCB, and release
1646 * the FIFO.
1647 */
1648 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
1649 ahd_outb(ahd, SCB_FIFO_USE_COUNT,
1650 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1);
1651 ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
1652 }
1653 }
1654
1655 /*
1656 * Look for entries in the QoutFIFO that have completed.
1657 * The valid_tag completion field indicates the validity
1658 * of the entry - the valid value toggles each time through
1659 * the queue. We use the sg_status field in the completion
1660 * entry to avoid referencing the hscb if the completion
1661 * occurred with no errors and no residual. sg_status is
1662 * a copy of the first byte (little endian) of the sgptr
1663 * hscb field.
1664 */
1665 static void
1666 ahd_run_qoutfifo(struct ahd_softc *ahd)
1667 {
1668 struct ahd_completion *completion;
1669 struct scb *scb;
1670 u_int scb_index;
1671
1672 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0)
1673 panic("ahd_run_qoutfifo recursion");
1674 ahd->flags |= AHD_RUNNING_QOUTFIFO;
1675 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD);
1676 for (;;) {
1677 completion = &ahd->qoutfifo[ahd->qoutfifonext];
1678
1679 if (completion->valid_tag != ahd->qoutfifonext_valid_tag)
1680 break;
1681
1682 scb_index = ahd_le16toh(completion->tag);
1683 scb = ahd_lookup_scb(ahd, scb_index);
1684 if (scb == NULL) {
1685 printf("%s: WARNING no command for scb %d "
1686 "(cmdcmplt)\nQOUTPOS = %d\n",
1687 ahd_name(ahd), scb_index,
1688 ahd->qoutfifonext);
1689 ahd_dump_card_state(ahd);
1690 } else if ((completion->sg_status & SG_STATUS_VALID) != 0) {
1691 ahd_handle_scb_status(ahd, scb);
1692 } else {
1693 ahd_done(ahd, scb);
1694 }
1695
1696 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1);
1697 if (ahd->qoutfifonext == 0)
1698 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID;
1699 }
1700 ahd->flags &= ~AHD_RUNNING_QOUTFIFO;
1701 }
1702
1703 /************************* Interrupt Handling *********************************/
1704 static void
1705 ahd_handle_hwerrint(struct ahd_softc *ahd)
1706 {
1707 /*
1708 * Some catastrophic hardware error has occurred.
1709 * Print it for the user and disable the controller.
1710 */
1711 int i;
1712 int error;
1713
1714 error = ahd_inb(ahd, ERROR);
1715 for (i = 0; i < num_errors; i++) {
1716 if ((error & ahd_hard_errors[i].errno) != 0)
1717 printf("%s: hwerrint, %s\n",
1718 ahd_name(ahd), ahd_hard_errors[i].errmesg);
1719 }
1720
1721 ahd_dump_card_state(ahd);
1722 panic("BRKADRINT");
1723
1724 /* Tell everyone that this HBA is no longer available */
1725 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
1726 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
1727 CAM_NO_HBA);
1728
1729 /* Tell the system that this controller has gone away. */
1730 ahd_free(ahd);
1731 }
1732
1733 #ifdef AHD_DEBUG
1734 static void
1735 ahd_dump_sglist(struct scb *scb)
1736 {
1737 int i;
1738
1739 if (scb->sg_count > 0) {
1740 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) {
1741 struct ahd_dma64_seg *sg_list;
1742
1743 sg_list = (struct ahd_dma64_seg*)scb->sg_list;
1744 for (i = 0; i < scb->sg_count; i++) {
1745 uint64_t addr;
1746 uint32_t len;
1747
1748 addr = ahd_le64toh(sg_list[i].addr);
1749 len = ahd_le32toh(sg_list[i].len);
1750 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n",
1751 i,
1752 (uint32_t)((addr >> 32) & 0xFFFFFFFF),
1753 (uint32_t)(addr & 0xFFFFFFFF),
1754 sg_list[i].len & AHD_SG_LEN_MASK,
1755 (sg_list[i].len & AHD_DMA_LAST_SEG)
1756 ? " Last" : "");
1757 }
1758 } else {
1759 struct ahd_dma_seg *sg_list;
1760
1761 sg_list = (struct ahd_dma_seg*)scb->sg_list;
1762 for (i = 0; i < scb->sg_count; i++) {
1763 uint32_t len;
1764
1765 len = ahd_le32toh(sg_list[i].len);
1766 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n",
1767 i,
1768 (len & AHD_SG_HIGH_ADDR_MASK) >> 24,
1769 ahd_le32toh(sg_list[i].addr),
1770 len & AHD_SG_LEN_MASK,
1771 len & AHD_DMA_LAST_SEG ? " Last" : "");
1772 }
1773 }
1774 }
1775 }
1776 #endif /* AHD_DEBUG */
1777
1778 static void
1779 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
1780 {
1781 u_int seqintcode;
1782
1783 /*
1784 * Save the sequencer interrupt code and clear the SEQINT
1785 * bit. We will unpause the sequencer, if appropriate,
1786 * after servicing the request.
1787 */
1788 seqintcode = ahd_inb(ahd, SEQINTCODE);
1789 ahd_outb(ahd, CLRINT, CLRSEQINT);
1790 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
1791 /*
1792 * Unpause the sequencer and let it clear
1793 * SEQINT by writing NO_SEQINT to it. This
1794 * will cause the sequencer to be paused again,
1795 * which is the expected state of this routine.
1796 */
1797 ahd_unpause(ahd);
1798 while (!ahd_is_paused(ahd))
1799 ;
1800 ahd_outb(ahd, CLRINT, CLRSEQINT);
1801 }
1802 ahd_update_modes(ahd);
1803 #ifdef AHD_DEBUG
1804 if ((ahd_debug & AHD_SHOW_MISC) != 0)
1805 printf("%s: Handle Seqint Called for code %d\n",
1806 ahd_name(ahd), seqintcode);
1807 #endif
1808 switch (seqintcode) {
1809 case ENTERING_NONPACK:
1810 {
1811 struct scb *scb;
1812 u_int scbid;
1813
1814 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
1815 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
1816 scbid = ahd_get_scbptr(ahd);
1817 scb = ahd_lookup_scb(ahd, scbid);
1818 if (scb == NULL) {
1819 /*
1820 * Somehow need to know if this
1821 * is from a selection or reselection.
1822 * From that, we can determine target
1823 * ID so we at least have an I_T nexus.
1824 */
1825 } else {
1826 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
1827 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun);
1828 ahd_outb(ahd, SEQ_FLAGS, 0x0);
1829 }
1830 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0
1831 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
1832 /*
1833 * Phase change after read stream with
1834 * CRC error with P0 asserted on last
1835 * packet.
1836 */
1837 #ifdef AHD_DEBUG
1838 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
1839 printf("%s: Assuming LQIPHASE_NLQ with "
1840 "P0 assertion\n", ahd_name(ahd));
1841 #endif
1842 }
1843 #ifdef AHD_DEBUG
1844 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
1845 printf("%s: Entering NONPACK\n", ahd_name(ahd));
1846 #endif
1847 break;
1848 }
1849 case INVALID_SEQINT:
1850 printf("%s: Invalid Sequencer interrupt occurred, "
1851 "resetting channel.\n",
1852 ahd_name(ahd));
1853 #ifdef AHD_DEBUG
1854 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
1855 ahd_dump_card_state(ahd);
1856 #endif
1857 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1858 break;
1859 case STATUS_OVERRUN:
1860 {
1861 struct scb *scb;
1862 u_int scbid;
1863
1864 scbid = ahd_get_scbptr(ahd);
1865 scb = ahd_lookup_scb(ahd, scbid);
1866 if (scb != NULL)
1867 ahd_print_path(ahd, scb);
1868 else
1869 printf("%s: ", ahd_name(ahd));
1870 printf("SCB %d Packetized Status Overrun", scbid);
1871 ahd_dump_card_state(ahd);
1872 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1873 break;
1874 }
1875 case CFG4ISTAT_INTR:
1876 {
1877 struct scb *scb;
1878 u_int scbid;
1879
1880 scbid = ahd_get_scbptr(ahd);
1881 scb = ahd_lookup_scb(ahd, scbid);
1882 if (scb == NULL) {
1883 ahd_dump_card_state(ahd);
1884 printf("CFG4ISTAT: Free SCB %d referenced", scbid);
1885 panic("For safety");
1886 }
1887 ahd_outq(ahd, HADDR, scb->sense_busaddr);
1888 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE);
1889 ahd_outb(ahd, HCNT + 2, 0);
1890 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG);
1891 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
1892 break;
1893 }
1894 case ILLEGAL_PHASE:
1895 {
1896 u_int bus_phase;
1897
1898 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1899 printf("%s: ILLEGAL_PHASE 0x%x\n",
1900 ahd_name(ahd), bus_phase);
1901
1902 switch (bus_phase) {
1903 case P_DATAOUT:
1904 case P_DATAIN:
1905 case P_DATAOUT_DT:
1906 case P_DATAIN_DT:
1907 case P_MESGOUT:
1908 case P_STATUS:
1909 case P_MESGIN:
1910 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1911 printf("%s: Issued Bus Reset.\n", ahd_name(ahd));
1912 break;
1913 case P_COMMAND:
1914 {
1915 struct ahd_devinfo devinfo;
1916 struct scb *scb;
1917 struct ahd_initiator_tinfo *targ_info;
1918 struct ahd_tmode_tstate *tstate;
1919 struct ahd_transinfo *tinfo;
1920 u_int scbid;
1921
1922 /*
1923 * If a target takes us into the command phase
1924 * assume that it has been externally reset and
1925 * has thus lost our previous packetized negotiation
1926 * agreement. Since we have not sent an identify
1927 * message and may not have fully qualified the
1928 * connection, we change our command to TUR, assert
1929 * ATN and ABORT the task when we go to message in
1930 * phase. The OSM will see the REQUEUE_REQUEST
1931 * status and retry the command.
1932 */
1933 scbid = ahd_get_scbptr(ahd);
1934 scb = ahd_lookup_scb(ahd, scbid);
1935 if (scb == NULL) {
1936 printf("Invalid phase with no valid SCB. "
1937 "Resetting bus.\n");
1938 ahd_reset_channel(ahd, 'A',
1939 /*Initiate Reset*/TRUE);
1940 break;
1941 }
1942 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
1943 SCB_GET_TARGET(ahd, scb),
1944 SCB_GET_LUN(scb),
1945 SCB_GET_CHANNEL(ahd, scb),
1946 ROLE_INITIATOR);
1947 targ_info = ahd_fetch_transinfo(ahd,
1948 devinfo.channel,
1949 devinfo.our_scsiid,
1950 devinfo.target,
1951 &tstate);
1952 tinfo = &targ_info->curr;
1953 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
1954 AHD_TRANS_ACTIVE, /*paused*/TRUE);
1955 ahd_set_syncrate(ahd, &devinfo, /*period*/0,
1956 /*offset*/0, /*ppr_options*/0,
1957 AHD_TRANS_ACTIVE, /*paused*/TRUE);
1958 /* Hand-craft TUR command */
1959 ahd_outb(ahd, SCB_CDB_STORE, 0);
1960 ahd_outb(ahd, SCB_CDB_STORE+1, 0);
1961 ahd_outb(ahd, SCB_CDB_STORE+2, 0);
1962 ahd_outb(ahd, SCB_CDB_STORE+3, 0);
1963 ahd_outb(ahd, SCB_CDB_STORE+4, 0);
1964 ahd_outb(ahd, SCB_CDB_STORE+5, 0);
1965 ahd_outb(ahd, SCB_CDB_LEN, 6);
1966 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE);
1967 scb->hscb->control |= MK_MESSAGE;
1968 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control);
1969 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1970 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
1971 /*
1972 * The lun is 0, regardless of the SCB's lun
1973 * as we have not sent an identify message.
1974 */
1975 ahd_outb(ahd, SAVED_LUN, 0);
1976 ahd_outb(ahd, SEQ_FLAGS, 0);
1977 ahd_assert_atn(ahd);
1978 scb->flags &= ~SCB_PACKETIZED;
1979 scb->flags |= SCB_ABORT|SCB_EXTERNAL_RESET;
1980 ahd_freeze_devq(ahd, scb);
1981 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
1982 ahd_freeze_scb(scb);
1983
1984 /* Notify XPT */
1985 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1986 CAM_LUN_WILDCARD, AC_SENT_BDR);
1987
1988 /*
1989 * Allow the sequencer to continue with
1990 * non-pack processing.
1991 */
1992 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1993 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT);
1994 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
1995 ahd_outb(ahd, CLRLQOINT1, 0);
1996 }
1997 #ifdef AHD_DEBUG
1998 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1999 ahd_print_path(ahd, scb);
2000 printf("Unexpected command phase from "
2001 "packetized target\n");
2002 }
2003 #endif
2004 break;
2005 }
2006 }
2007 break;
2008 }
2009 case CFG4OVERRUN:
2010 {
2011 struct scb *scb;
2012 u_int scb_index;
2013
2014 #ifdef AHD_DEBUG
2015 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
2016 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd),
2017 ahd_inb(ahd, MODE_PTR));
2018 }
2019 #endif
2020 scb_index = ahd_get_scbptr(ahd);
2021 scb = ahd_lookup_scb(ahd, scb_index);
2022 if (scb == NULL) {
2023 /*
2024 * Attempt to transfer to an SCB that is
2025 * not outstanding.
2026 */
2027 ahd_assert_atn(ahd);
2028 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2029 ahd->msgout_buf[0] = MSG_ABORT_TASK;
2030 ahd->msgout_len = 1;
2031 ahd->msgout_index = 0;
2032 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
2033 /*
2034 * Clear status received flag to prevent any
2035 * attempt to complete this bogus SCB.
2036 */
2037 ahd_outb(ahd, SCB_CONTROL,
2038 ahd_inb_scbram(ahd, SCB_CONTROL)
2039 & ~STATUS_RCVD);
2040 }
2041 break;
2042 }
2043 case DUMP_CARD_STATE:
2044 {
2045 ahd_dump_card_state(ahd);
2046 break;
2047 }
2048 case PDATA_REINIT:
2049 {
2050 #ifdef AHD_DEBUG
2051 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
2052 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x "
2053 "SG_CACHE_SHADOW = 0x%x\n",
2054 ahd_name(ahd), ahd_inb(ahd, DFCNTRL),
2055 ahd_inb(ahd, SG_CACHE_SHADOW));
2056 }
2057 #endif
2058 ahd_reinitialize_dataptrs(ahd);
2059 break;
2060 }
2061 case HOST_MSG_LOOP:
2062 {
2063 struct ahd_devinfo devinfo;
2064
2065 /*
2066 * The sequencer has encountered a message phase
2067 * that requires host assistance for completion.
2068 * While handling the message phase(s), we will be
2069 * notified by the sequencer after each byte is
2070 * transfered so we can track bus phase changes.
2071 *
2072 * If this is the first time we've seen a HOST_MSG_LOOP
2073 * interrupt, initialize the state of the host message
2074 * loop.
2075 */
2076 ahd_fetch_devinfo(ahd, &devinfo);
2077 if (ahd->msg_type == MSG_TYPE_NONE) {
2078 struct scb *scb;
2079 u_int scb_index;
2080 u_int bus_phase;
2081
2082 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
2083 if (bus_phase != P_MESGIN
2084 && bus_phase != P_MESGOUT) {
2085 printf("ahd_intr: HOST_MSG_LOOP bad "
2086 "phase 0x%x\n", bus_phase);
2087 /*
2088 * Probably transitioned to bus free before
2089 * we got here. Just punt the message.
2090 */
2091 ahd_dump_card_state(ahd);
2092 ahd_clear_intstat(ahd);
2093 ahd_restart(ahd);
2094 return;
2095 }
2096
2097 scb_index = ahd_get_scbptr(ahd);
2098 scb = ahd_lookup_scb(ahd, scb_index);
2099 if (devinfo.role == ROLE_INITIATOR) {
2100 if (bus_phase == P_MESGOUT)
2101 ahd_setup_initiator_msgout(ahd,
2102 &devinfo,
2103 scb);
2104 else {
2105 ahd->msg_type =
2106 MSG_TYPE_INITIATOR_MSGIN;
2107 ahd->msgin_index = 0;
2108 }
2109 }
2110 #ifdef AHD_TARGET_MODE
2111 else {
2112 if (bus_phase == P_MESGOUT) {
2113 ahd->msg_type =
2114 MSG_TYPE_TARGET_MSGOUT;
2115 ahd->msgin_index = 0;
2116 }
2117 else
2118 ahd_setup_target_msgin(ahd,
2119 &devinfo,
2120 scb);
2121 }
2122 #endif
2123 }
2124
2125 ahd_handle_message_phase(ahd);
2126 break;
2127 }
2128 case NO_MATCH:
2129 {
2130 /* Ensure we don't leave the selection hardware on */
2131 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
2132 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
2133
2134 printf("%s:%c:%d: no active SCB for reconnecting "
2135 "target - issuing BUS DEVICE RESET\n",
2136 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4);
2137 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
2138 "REG0 == 0x%x ACCUM = 0x%x\n",
2139 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN),
2140 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM));
2141 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
2142 "SINDEX == 0x%x\n",
2143 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd),
2144 ahd_find_busy_tcl(ahd,
2145 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID),
2146 ahd_inb(ahd, SAVED_LUN))),
2147 ahd_inw(ahd, SINDEX));
2148 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
2149 "SCB_CONTROL == 0x%x\n",
2150 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID),
2151 ahd_inb_scbram(ahd, SCB_LUN),
2152 ahd_inb_scbram(ahd, SCB_CONTROL));
2153 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n",
2154 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI));
2155 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0));
2156 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0));
2157 ahd_dump_card_state(ahd);
2158 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET;
2159 ahd->msgout_len = 1;
2160 ahd->msgout_index = 0;
2161 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
2162 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2163 ahd_assert_atn(ahd);
2164 break;
2165 }
2166 case PROTO_VIOLATION:
2167 {
2168 ahd_handle_proto_violation(ahd);
2169 break;
2170 }
2171 case IGN_WIDE_RES:
2172 {
2173 struct ahd_devinfo devinfo;
2174
2175 ahd_fetch_devinfo(ahd, &devinfo);
2176 ahd_handle_ign_wide_residue(ahd, &devinfo);
2177 break;
2178 }
2179 case BAD_PHASE:
2180 {
2181 u_int lastphase;
2182
2183 lastphase = ahd_inb(ahd, LASTPHASE);
2184 printf("%s:%c:%d: unknown scsi bus phase %x, "
2185 "lastphase = 0x%x. Attempting to continue\n",
2186 ahd_name(ahd), 'A',
2187 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
2188 lastphase, ahd_inb(ahd, SCSISIGI));
2189 break;
2190 }
2191 case MISSED_BUSFREE:
2192 {
2193 u_int lastphase;
2194
2195 lastphase = ahd_inb(ahd, LASTPHASE);
2196 printf("%s:%c:%d: Missed busfree. "
2197 "Lastphase = 0x%x, Curphase = 0x%x\n",
2198 ahd_name(ahd), 'A',
2199 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
2200 lastphase, ahd_inb(ahd, SCSISIGI));
2201 ahd_restart(ahd);
2202 return;
2203 }
2204 case DATA_OVERRUN:
2205 {
2206 /*
2207 * When the sequencer detects an overrun, it
2208 * places the controller in "BITBUCKET" mode
2209 * and allows the target to complete its transfer.
2210 * Unfortunately, none of the counters get updated
2211 * when the controller is in this mode, so we have
2212 * no way of knowing how large the overrun was.
2213 */
2214 struct scb *scb;
2215 u_int scbindex;
2216 #ifdef AHD_DEBUG
2217 u_int lastphase;
2218 #endif
2219
2220 scbindex = ahd_get_scbptr(ahd);
2221 scb = ahd_lookup_scb(ahd, scbindex);
2222 #ifdef AHD_DEBUG
2223 lastphase = ahd_inb(ahd, LASTPHASE);
2224 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
2225 ahd_print_path(ahd, scb);
2226 printf("data overrun detected %s. Tag == 0x%x.\n",
2227 ahd_lookup_phase_entry(lastphase)->phasemsg,
2228 SCB_GET_TAG(scb));
2229 ahd_print_path(ahd, scb);
2230 printf("%s seen Data Phase. Length = %ld. "
2231 "NumSGs = %d.\n",
2232 ahd_inb(ahd, SEQ_FLAGS) & DPHASE
2233 ? "Have" : "Haven't",
2234 ahd_get_transfer_length(scb), scb->sg_count);
2235 ahd_dump_sglist(scb);
2236 }
2237 #endif
2238
2239 /*
2240 * Set this and it will take effect when the
2241 * target does a command complete.
2242 */
2243 ahd_freeze_devq(ahd, scb);
2244 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
2245 ahd_freeze_scb(scb);
2246 break;
2247 }
2248 case MKMSG_FAILED:
2249 {
2250 struct ahd_devinfo devinfo;
2251 struct scb *scb;
2252 u_int scbid;
2253
2254 ahd_fetch_devinfo(ahd, &devinfo);
2255 printf("%s:%c:%d:%d: Attempt to issue message failed\n",
2256 ahd_name(ahd), devinfo.channel, devinfo.target,
2257 devinfo.lun);
2258 scbid = ahd_get_scbptr(ahd);
2259 scb = ahd_lookup_scb(ahd, scbid);
2260 if (scb != NULL
2261 && (scb->flags & SCB_RECOVERY_SCB) != 0)
2262 /*
2263 * Ensure that we didn't put a second instance of this
2264 * SCB into the QINFIFO.
2265 */
2266 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
2267 SCB_GET_CHANNEL(ahd, scb),
2268 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
2269 ROLE_INITIATOR, /*status*/0,
2270 SEARCH_REMOVE);
2271 ahd_outb(ahd, SCB_CONTROL,
2272 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
2273 break;
2274 }
2275 case TASKMGMT_FUNC_COMPLETE:
2276 {
2277 u_int scbid;
2278 struct scb *scb;
2279
2280 scbid = ahd_get_scbptr(ahd);
2281 scb = ahd_lookup_scb(ahd, scbid);
2282 if (scb != NULL) {
2283 u_int lun;
2284 u_int tag;
2285 cam_status error;
2286
2287 ahd_print_path(ahd, scb);
2288 printf("Task Management Func 0x%x Complete\n",
2289 scb->hscb->task_management);
2290 lun = CAM_LUN_WILDCARD;
2291 tag = SCB_LIST_NULL;
2292
2293 switch (scb->hscb->task_management) {
2294 case SIU_TASKMGMT_ABORT_TASK:
2295 tag = SCB_GET_TAG(scb);
2296 case SIU_TASKMGMT_ABORT_TASK_SET:
2297 case SIU_TASKMGMT_CLEAR_TASK_SET:
2298 lun = scb->hscb->lun;
2299 error = CAM_REQ_ABORTED;
2300 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
2301 'A', lun, tag, ROLE_INITIATOR,
2302 error);
2303 break;
2304 case SIU_TASKMGMT_LUN_RESET:
2305 lun = scb->hscb->lun;
2306 case SIU_TASKMGMT_TARGET_RESET:
2307 {
2308 struct ahd_devinfo devinfo;
2309
2310 ahd_scb_devinfo(ahd, &devinfo, scb);
2311 error = CAM_BDR_SENT;
2312 ahd_handle_devreset(ahd, &devinfo, lun,
2313 CAM_BDR_SENT,
2314 lun != CAM_LUN_WILDCARD
2315 ? "Lun Reset"
2316 : "Target Reset",
2317 /*verbose_level*/0);
2318 break;
2319 }
2320 default:
2321 panic("Unexpected TaskMgmt Func\n");
2322 break;
2323 }
2324 }
2325 break;
2326 }
2327 case TASKMGMT_CMD_CMPLT_OKAY:
2328 {
2329 u_int scbid;
2330 struct scb *scb;
2331
2332 /*
2333 * An ABORT TASK TMF failed to be delivered before
2334 * the targeted command completed normally.
2335 */
2336 scbid = ahd_get_scbptr(ahd);
2337 scb = ahd_lookup_scb(ahd, scbid);
2338 if (scb != NULL) {
2339 /*
2340 * Remove the second instance of this SCB from
2341 * the QINFIFO if it is still there.
2342 */
2343 ahd_print_path(ahd, scb);
2344 printf("SCB completes before TMF\n");
2345 /*
2346 * Handle losing the race. Wait until any
2347 * current selection completes. We will then
2348 * set the TMF back to zero in this SCB so that
2349 * the sequencer doesn't bother to issue another
2350 * sequencer interrupt for its completion.
2351 */
2352 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
2353 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0
2354 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0)
2355 ;
2356 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0);
2357 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
2358 SCB_GET_CHANNEL(ahd, scb),
2359 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
2360 ROLE_INITIATOR, /*status*/0,
2361 SEARCH_REMOVE);
2362 }
2363 break;
2364 }
2365 case TRACEPOINT0:
2366 case TRACEPOINT1:
2367 case TRACEPOINT2:
2368 case TRACEPOINT3:
2369 printf("%s: Tracepoint %d\n", ahd_name(ahd),
2370 seqintcode - TRACEPOINT0);
2371 break;
2372 case NO_SEQINT:
2373 break;
2374 case SAW_HWERR:
2375 ahd_handle_hwerrint(ahd);
2376 break;
2377 default:
2378 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd),
2379 seqintcode);
2380 break;
2381 }
2382 /*
2383 * The sequencer is paused immediately on
2384 * a SEQINT, so we should restart it when
2385 * we're done.
2386 */
2387 ahd_unpause(ahd);
2388 }
2389
2390 static void
2391 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
2392 {
2393 struct scb *scb;
2394 u_int status0;
2395 u_int status3;
2396 u_int status;
2397 u_int lqistat1;
2398 u_int lqostat0;
2399 u_int scbid;
2400 u_int busfreetime;
2401
2402 ahd_update_modes(ahd);
2403 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2404
2405 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR);
2406 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO);
2407 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
2408 lqistat1 = ahd_inb(ahd, LQISTAT1);
2409 lqostat0 = ahd_inb(ahd, LQOSTAT0);
2410 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
2411
2412 /*
2413 * Ignore external resets after a bus reset.
2414 */
2415 if (((status & SCSIRSTI) != 0) && (ahd->flags & AHD_BUS_RESET_ACTIVE)) {
2416 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
2417 return;
2418 }
2419
2420 /*
2421 * Clear bus reset flag
2422 */
2423 ahd->flags &= ~AHD_BUS_RESET_ACTIVE;
2424
2425 if ((status0 & (SELDI|SELDO)) != 0) {
2426 u_int simode0;
2427
2428 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
2429 simode0 = ahd_inb(ahd, SIMODE0);
2430 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO);
2431 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2432 }
2433 scbid = ahd_get_scbptr(ahd);
2434 scb = ahd_lookup_scb(ahd, scbid);
2435 if (scb != NULL
2436 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
2437 scb = NULL;
2438
2439 if ((status0 & IOERR) != 0) {
2440 u_int now_lvd;
2441
2442 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40;
2443 printf("%s: Transceiver State Has Changed to %s mode\n",
2444 ahd_name(ahd), now_lvd ? "LVD" : "SE");
2445 ahd_outb(ahd, CLRSINT0, CLRIOERR);
2446 /*
2447 * A change in I/O mode is equivalent to a bus reset.
2448 */
2449 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2450 ahd_pause(ahd);
2451 ahd_setup_iocell_workaround(ahd);
2452 ahd_unpause(ahd);
2453 } else if ((status0 & OVERRUN) != 0) {
2454
2455 printf("%s: SCSI offset overrun detected. Resetting bus.\n",
2456 ahd_name(ahd));
2457 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2458 } else if ((status & SCSIRSTI) != 0) {
2459
2460 printf("%s: Someone reset channel A\n", ahd_name(ahd));
2461 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE);
2462 } else if ((status & SCSIPERR) != 0) {
2463
2464 /* Make sure the sequencer is in a safe location. */
2465 ahd_clear_critical_section(ahd);
2466
2467 ahd_handle_transmission_error(ahd);
2468 } else if (lqostat0 != 0) {
2469
2470 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0);
2471 ahd_outb(ahd, CLRLQOINT0, lqostat0);
2472 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
2473 ahd_outb(ahd, CLRLQOINT1, 0);
2474 } else if ((status & SELTO) != 0) {
2475 /* Stop the selection */
2476 ahd_outb(ahd, SCSISEQ0, 0);
2477
2478 /* Make sure the sequencer is in a safe location. */
2479 ahd_clear_critical_section(ahd);
2480
2481 /* No more pending messages */
2482 ahd_clear_msg_state(ahd);
2483
2484 /* Clear interrupt state */
2485 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);
2486
2487 /*
2488 * Although the driver does not care about the
2489 * 'Selection in Progress' status bit, the busy
2490 * LED does. SELINGO is only cleared by a sucessfull
2491 * selection, so we must manually clear it to insure
2492 * the LED turns off just incase no future successful
2493 * selections occur (e.g. no devices on the bus).
2494 */
2495 ahd_outb(ahd, CLRSINT0, CLRSELINGO);
2496
2497 scbid = ahd_inw(ahd, WAITING_TID_HEAD);
2498 scb = ahd_lookup_scb(ahd, scbid);
2499 if (scb == NULL) {
2500 printf("%s: ahd_intr - referenced scb not "
2501 "valid during SELTO scb(0x%x)\n",
2502 ahd_name(ahd), scbid);
2503 ahd_dump_card_state(ahd);
2504 } else {
2505 struct ahd_devinfo devinfo;
2506 #ifdef AHD_DEBUG
2507 if ((ahd_debug & AHD_SHOW_SELTO) != 0) {
2508 ahd_print_path(ahd, scb);
2509 printf("Saw Selection Timeout for SCB 0x%x\n",
2510 scbid);
2511 }
2512 #endif
2513 ahd_scb_devinfo(ahd, &devinfo, scb);
2514 ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT);
2515 ahd_freeze_devq(ahd, scb);
2516
2517 /*
2518 * Cancel any pending transactions on the device
2519 * now that it seems to be missing. This will
2520 * also revert us to async/narrow transfers until
2521 * we can renegotiate with the device.
2522 */
2523 ahd_handle_devreset(ahd, &devinfo,
2524 CAM_LUN_WILDCARD,
2525 CAM_SEL_TIMEOUT,
2526 "Selection Timeout",
2527 /*verbose_level*/1);
2528 }
2529 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2530 ahd_iocell_first_selection(ahd);
2531 ahd_unpause(ahd);
2532 } else if ((status0 & (SELDI|SELDO)) != 0) {
2533
2534 ahd_iocell_first_selection(ahd);
2535 ahd_unpause(ahd);
2536 } else if (status3 != 0) {
2537 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n",
2538 ahd_name(ahd), status3);
2539 ahd_outb(ahd, CLRSINT3, status3);
2540 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) {
2541
2542 /* Make sure the sequencer is in a safe location. */
2543 ahd_clear_critical_section(ahd);
2544
2545 ahd_handle_lqiphase_error(ahd, lqistat1);
2546 } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
2547 /*
2548 * This status can be delayed during some
2549 * streaming operations. The SCSIPHASE
2550 * handler has already dealt with this case
2551 * so just clear the error.
2552 */
2553 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ);
2554 } else if ((status & BUSFREE) != 0
2555 || (lqistat1 & LQOBUSFREE) != 0) {
2556 u_int lqostat1;
2557 int restart;
2558 int clear_fifo;
2559 int packetized;
2560 u_int mode;
2561
2562 /*
2563 * Clear our selection hardware as soon as possible.
2564 * We may have an entry in the waiting Q for this target,
2565 * that is affected by this busfree and we don't want to
2566 * go about selecting the target while we handle the event.
2567 */
2568 ahd_outb(ahd, SCSISEQ0, 0);
2569
2570 /* Make sure the sequencer is in a safe location. */
2571 ahd_clear_critical_section(ahd);
2572
2573 /*
2574 * Determine what we were up to at the time of
2575 * the busfree.
2576 */
2577 mode = AHD_MODE_SCSI;
2578 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
2579 lqostat1 = ahd_inb(ahd, LQOSTAT1);
2580 switch (busfreetime) {
2581 case BUSFREE_DFF0:
2582 case BUSFREE_DFF1:
2583 {
2584 mode = busfreetime == BUSFREE_DFF0
2585 ? AHD_MODE_DFF0 : AHD_MODE_DFF1;
2586 ahd_set_modes(ahd, mode, mode);
2587 scbid = ahd_get_scbptr(ahd);
2588 scb = ahd_lookup_scb(ahd, scbid);
2589 if (scb == NULL) {
2590 printf("%s: Invalid SCB %d in DFF%d "
2591 "during unexpected busfree\n",
2592 ahd_name(ahd), scbid, mode);
2593 packetized = 0;
2594 } else
2595 packetized = (scb->flags & SCB_PACKETIZED) != 0;
2596 clear_fifo = 1;
2597 break;
2598 }
2599 case BUSFREE_LQO:
2600 clear_fifo = 0;
2601 packetized = 1;
2602 break;
2603 default:
2604 clear_fifo = 0;
2605 packetized = (lqostat1 & LQOBUSFREE) != 0;
2606 if (!packetized
2607 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE
2608 && (ahd_inb(ahd, SSTAT0) & SELDI) == 0
2609 && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0
2610 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0))
2611 /*
2612 * Assume packetized if we are not
2613 * on the bus in a non-packetized
2614 * capacity and any pending selection
2615 * was a packetized selection.
2616 */
2617 packetized = 1;
2618 break;
2619 }
2620
2621 #ifdef AHD_DEBUG
2622 if ((ahd_debug & AHD_SHOW_MISC) != 0)
2623 printf("Saw Busfree. Busfreetime = 0x%x.\n",
2624 busfreetime);
2625 #endif
2626 /*
2627 * Busfrees that occur in non-packetized phases are
2628 * handled by the nonpkt_busfree handler.
2629 */
2630 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) {
2631 restart = ahd_handle_pkt_busfree(ahd, busfreetime);
2632 } else {
2633 packetized = 0;
2634 restart = ahd_handle_nonpkt_busfree(ahd);
2635 }
2636 /*
2637 * Clear the busfree interrupt status. The setting of
2638 * the interrupt is a pulse, so in a perfect world, we
2639 * would not need to muck with the ENBUSFREE logic. This
2640 * would ensure that if the bus moves on to another
2641 * connection, busfree protection is still in force. If
2642 * BUSFREEREV is broken, however, we must manually clear
2643 * the ENBUSFREE if the busfree occurred during a non-pack
2644 * connection so that we don't get false positives during
2645 * future, packetized, connections.
2646 */
2647 ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
2648 if (packetized == 0
2649 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0)
2650 ahd_outb(ahd, SIMODE1,
2651 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE);
2652
2653 if (clear_fifo)
2654 ahd_clear_fifo(ahd, mode);
2655
2656 ahd_clear_msg_state(ahd);
2657 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2658 if (restart) {
2659 ahd_restart(ahd);
2660 } else {
2661 ahd_unpause(ahd);
2662 }
2663 } else {
2664 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n",
2665 ahd_name(ahd), status);
2666 ahd_dump_card_state(ahd);
2667 ahd_clear_intstat(ahd);
2668 ahd_unpause(ahd);
2669 }
2670 }
2671
2672 static void
2673 ahd_handle_transmission_error(struct ahd_softc *ahd)
2674 {
2675 struct scb *scb;
2676 u_int scbid;
2677 u_int lqistat1;
2678 u_int lqistat2;
2679 u_int msg_out;
2680 u_int curphase;
2681 u_int lastphase;
2682 u_int perrdiag;
2683 u_int cur_col;
2684 int silent;
2685
2686 scb = NULL;
2687 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2688 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ);
2689 lqistat2 = ahd_inb(ahd, LQISTAT2);
2690 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0
2691 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) {
2692 u_int lqistate;
2693
2694 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
2695 lqistate = ahd_inb(ahd, LQISTATE);
2696 if ((lqistate >= 0x1E && lqistate <= 0x24)
2697 || (lqistate == 0x29)) {
2698 #ifdef AHD_DEBUG
2699 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
2700 printf("%s: NLQCRC found via LQISTATE\n",
2701 ahd_name(ahd));
2702 }
2703 #endif
2704 lqistat1 |= LQICRCI_NLQ;
2705 }
2706 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2707 }
2708
2709 ahd_outb(ahd, CLRLQIINT1, lqistat1);
2710 lastphase = ahd_inb(ahd, LASTPHASE);
2711 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
2712 perrdiag = ahd_inb(ahd, PERRDIAG);
2713 msg_out = MSG_INITIATOR_DET_ERR;
2714 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR);
2715
2716 /*
2717 * Try to find the SCB associated with this error.
2718 */
2719 silent = FALSE;
2720 if (lqistat1 == 0
2721 || (lqistat1 & LQICRCI_NLQ) != 0) {
2722 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0)
2723 ahd_set_active_fifo(ahd);
2724 scbid = ahd_get_scbptr(ahd);
2725 scb = ahd_lookup_scb(ahd, scbid);
2726 if (scb != NULL && SCB_IS_SILENT(scb))
2727 silent = TRUE;
2728 }
2729
2730 cur_col = 0;
2731 if (silent == FALSE) {
2732 printf("%s: Transmission error detected\n", ahd_name(ahd));
2733 ahd_lqistat1_print(lqistat1, &cur_col, 50);
2734 ahd_lastphase_print(lastphase, &cur_col, 50);
2735 ahd_scsisigi_print(curphase, &cur_col, 50);
2736 ahd_perrdiag_print(perrdiag, &cur_col, 50);
2737 printf("\n");
2738 ahd_dump_card_state(ahd);
2739 }
2740
2741 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) {
2742 if (silent == FALSE) {
2743 printf("%s: Gross protocol error during incoming "
2744 "packet. lqistat1 == 0x%x. Resetting bus.\n",
2745 ahd_name(ahd), lqistat1);
2746 }
2747 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2748 return;
2749 } else if ((lqistat1 & LQICRCI_LQ) != 0) {
2750 /*
2751 * A CRC error has been detected on an incoming LQ.
2752 * The bus is currently hung on the last ACK.
2753 * Hit LQIRETRY to release the last ack, and
2754 * wait for the sequencer to determine that ATNO
2755 * is asserted while in message out to take us
2756 * to our host message loop. No NONPACKREQ or
2757 * LQIPHASE type errors will occur in this
2758 * scenario. After this first LQIRETRY, the LQI
2759 * manager will be in ISELO where it will
2760 * happily sit until another packet phase begins.
2761 * Unexpected bus free detection is enabled
2762 * through any phases that occur after we release
2763 * this last ack until the LQI manager sees a
2764 * packet phase. This implies we may have to
2765 * ignore a perfectly valid "unexected busfree"
2766 * after our "initiator detected error" message is
2767 * sent. A busfree is the expected response after
2768 * we tell the target that it's L_Q was corrupted.
2769 * (SPI4R09 10.7.3.3.3)
2770 */
2771 ahd_outb(ahd, LQCTL2, LQIRETRY);
2772 printf("LQIRetry for LQICRCI_LQ to release ACK\n");
2773 } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
2774 /*
2775 * We detected a CRC error in a NON-LQ packet.
2776 * The hardware has varying behavior in this situation
2777 * depending on whether this packet was part of a
2778 * stream or not.
2779 *
2780 * PKT by PKT mode:
2781 * The hardware has already acked the complete packet.
2782 * If the target honors our outstanding ATN condition,
2783 * we should be (or soon will be) in MSGOUT phase.
2784 * This will trigger the LQIPHASE_LQ status bit as the
2785 * hardware was expecting another LQ. Unexpected
2786 * busfree detection is enabled. Once LQIPHASE_LQ is
2787 * true (first entry into host message loop is much
2788 * the same), we must clear LQIPHASE_LQ and hit
2789 * LQIRETRY so the hardware is ready to handle
2790 * a future LQ. NONPACKREQ will not be asserted again
2791 * once we hit LQIRETRY until another packet is
2792 * processed. The target may either go busfree
2793 * or start another packet in response to our message.
2794 *
2795 * Read Streaming P0 asserted:
2796 * If we raise ATN and the target completes the entire
2797 * stream (P0 asserted during the last packet), the
2798 * hardware will ack all data and return to the ISTART
2799 * state. When the target reponds to our ATN condition,
2800 * LQIPHASE_LQ will be asserted. We should respond to
2801 * this with an LQIRETRY to prepare for any future
2802 * packets. NONPACKREQ will not be asserted again
2803 * once we hit LQIRETRY until another packet is
2804 * processed. The target may either go busfree or
2805 * start another packet in response to our message.
2806 * Busfree detection is enabled.
2807 *
2808 * Read Streaming P0 not asserted:
2809 * If we raise ATN and the target transitions to
2810 * MSGOUT in or after a packet where P0 is not
2811 * asserted, the hardware will assert LQIPHASE_NLQ.
2812 * We should respond to the LQIPHASE_NLQ with an
2813 * LQIRETRY. Should the target stay in a non-pkt
2814 * phase after we send our message, the hardware
2815 * will assert LQIPHASE_LQ. Recovery is then just as
2816 * listed above for the read streaming with P0 asserted.
2817 * Busfree detection is enabled.
2818 */
2819 if (silent == FALSE)
2820 printf("LQICRC_NLQ\n");
2821 if (scb == NULL) {
2822 printf("%s: No SCB valid for LQICRC_NLQ. "
2823 "Resetting bus\n", ahd_name(ahd));
2824 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2825 return;
2826 }
2827 } else if ((lqistat1 & LQIBADLQI) != 0) {
2828 printf("Need to handle BADLQI!\n");
2829 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2830 return;
2831 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) {
2832 if ((curphase & ~P_DATAIN_DT) != 0) {
2833 /* Ack the byte. So we can continue. */
2834 if (silent == FALSE)
2835 printf("Acking %s to clear perror\n",
2836 ahd_lookup_phase_entry(curphase)->phasemsg);
2837 ahd_inb(ahd, SCSIDAT);
2838 }
2839
2840 if (curphase == P_MESGIN)
2841 msg_out = MSG_PARITY_ERROR;
2842 }
2843
2844 /*
2845 * We've set the hardware to assert ATN if we
2846 * get a parity error on "in" phases, so all we
2847 * need to do is stuff the message buffer with
2848 * the appropriate message. "In" phases have set
2849 * mesg_out to something other than MSG_NOP.
2850 */
2851 ahd->send_msg_perror = msg_out;
2852 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR)
2853 scb->flags |= SCB_TRANSMISSION_ERROR;
2854 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2855 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2856 ahd_unpause(ahd);
2857 }
2858
2859 static void
2860 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1)
2861 {
2862 /*
2863 * Clear the sources of the interrupts.
2864 */
2865 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2866 ahd_outb(ahd, CLRLQIINT1, lqistat1);
2867
2868 /*
2869 * If the "illegal" phase changes were in response
2870 * to our ATN to flag a CRC error, AND we ended up
2871 * on packet boundaries, clear the error, restart the
2872 * LQI manager as appropriate, and go on our merry
2873 * way toward sending the message. Otherwise, reset
2874 * the bus to clear the error.
2875 */
2876 ahd_set_active_fifo(ahd);
2877 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0
2878 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) {
2879 if ((lqistat1 & LQIPHASE_LQ) != 0) {
2880 printf("LQIRETRY for LQIPHASE_LQ\n");
2881 ahd_outb(ahd, LQCTL2, LQIRETRY);
2882 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) {
2883 printf("LQIRETRY for LQIPHASE_NLQ\n");
2884 ahd_outb(ahd, LQCTL2, LQIRETRY);
2885 } else
2886 panic("ahd_handle_lqiphase_error: No phase errors\n");
2887 ahd_dump_card_state(ahd);
2888 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2889 ahd_unpause(ahd);
2890 } else {
2891 printf("Reseting Channel for LQI Phase error\n");
2892 ahd_dump_card_state(ahd);
2893 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2894 }
2895 }
2896
2897 /*
2898 * Packetized unexpected or expected busfree.
2899 * Entered in mode based on busfreetime.
2900 */
2901 static int
2902 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime)
2903 {
2904 u_int lqostat1;
2905
2906 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
2907 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
2908 lqostat1 = ahd_inb(ahd, LQOSTAT1);
2909 if ((lqostat1 & LQOBUSFREE) != 0) {
2910 struct scb *scb;
2911 u_int scbid;
2912 u_int saved_scbptr;
2913 u_int waiting_h;
2914 u_int waiting_t;
2915 u_int next;
2916
2917 /*
2918 * The LQO manager detected an unexpected busfree
2919 * either:
2920 *
2921 * 1) During an outgoing LQ.
2922 * 2) After an outgoing LQ but before the first
2923 * REQ of the command packet.
2924 * 3) During an outgoing command packet.
2925 *
2926 * In all cases, CURRSCB is pointing to the
2927 * SCB that encountered the failure. Clean
2928 * up the queue, clear SELDO and LQOBUSFREE,
2929 * and allow the sequencer to restart the select
2930 * out at its lesure.
2931 */
2932 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2933 scbid = ahd_inw(ahd, CURRSCB);
2934 scb = ahd_lookup_scb(ahd, scbid);
2935 if (scb == NULL)
2936 panic("SCB not valid during LQOBUSFREE");
2937 /*
2938 * Clear the status.
2939 */
2940 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE);
2941 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
2942 ahd_outb(ahd, CLRLQOINT1, 0);
2943 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
2944 ahd_flush_device_writes(ahd);
2945 ahd_outb(ahd, CLRSINT0, CLRSELDO);
2946
2947 /*
2948 * Return the LQO manager to its idle loop. It will
2949 * not do this automatically if the busfree occurs
2950 * after the first REQ of either the LQ or command
2951 * packet or between the LQ and command packet.
2952 */
2953 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE);
2954
2955 /*
2956 * Update the waiting for selection queue so
2957 * we restart on the correct SCB.
2958 */
2959 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD);
2960 saved_scbptr = ahd_get_scbptr(ahd);
2961 if (waiting_h != scbid) {
2962
2963 ahd_outw(ahd, WAITING_TID_HEAD, scbid);
2964 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL);
2965 if (waiting_t == waiting_h) {
2966 ahd_outw(ahd, WAITING_TID_TAIL, scbid);
2967 next = SCB_LIST_NULL;
2968 } else {
2969 ahd_set_scbptr(ahd, waiting_h);
2970 next = ahd_inw_scbram(ahd, SCB_NEXT2);
2971 }
2972 ahd_set_scbptr(ahd, scbid);
2973 ahd_outw(ahd, SCB_NEXT2, next);
2974 }
2975 ahd_set_scbptr(ahd, saved_scbptr);
2976 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) {
2977 if (SCB_IS_SILENT(scb) == FALSE) {
2978 ahd_print_path(ahd, scb);
2979 printf("Probable outgoing LQ CRC error. "
2980 "Retrying command\n");
2981 }
2982 scb->crc_retry_count++;
2983 } else {
2984 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
2985 ahd_freeze_scb(scb);
2986 ahd_freeze_devq(ahd, scb);
2987 }
2988 /* Return unpausing the sequencer. */
2989 return (0);
2990 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) {
2991 /*
2992 * Ignore what are really parity errors that
2993 * occur on the last REQ of a free running
2994 * clock prior to going busfree. Some drives
2995 * do not properly active negate just before
2996 * going busfree resulting in a parity glitch.
2997 */
2998 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE);
2999 #ifdef AHD_DEBUG
3000 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0)
3001 printf("%s: Parity on last REQ detected "
3002 "during busfree phase.\n",
3003 ahd_name(ahd));
3004 #endif
3005 /* Return unpausing the sequencer. */
3006 return (0);
3007 }
3008 if (ahd->src_mode != AHD_MODE_SCSI) {
3009 u_int scbid;
3010 struct scb *scb;
3011
3012 scbid = ahd_get_scbptr(ahd);
3013 scb = ahd_lookup_scb(ahd, scbid);
3014 ahd_print_path(ahd, scb);
3015 printf("Unexpected PKT busfree condition\n");
3016 ahd_dump_card_state(ahd);
3017 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A',
3018 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
3019 ROLE_INITIATOR, CAM_UNEXP_BUSFREE);
3020
3021 /* Return restarting the sequencer. */
3022 return (1);
3023 }
3024 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd));
3025 ahd_dump_card_state(ahd);
3026 /* Restart the sequencer. */
3027 return (1);
3028 }
3029
3030 /*
3031 * Non-packetized unexpected or expected busfree.
3032 */
3033 static int
3034 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd)
3035 {
3036 struct ahd_devinfo devinfo;
3037 struct scb *scb;
3038 u_int lastphase;
3039 u_int saved_scsiid;
3040 u_int saved_lun;
3041 u_int target;
3042 u_int initiator_role_id;
3043 u_int scbid;
3044 u_int ppr_busfree;
3045 int printerror;
3046
3047 /*
3048 * Look at what phase we were last in. If its message out,
3049 * chances are pretty good that the busfree was in response
3050 * to one of our abort requests.
3051 */
3052 lastphase = ahd_inb(ahd, LASTPHASE);
3053 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
3054 saved_lun = ahd_inb(ahd, SAVED_LUN);
3055 target = SCSIID_TARGET(ahd, saved_scsiid);
3056 initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
3057 ahd_compile_devinfo(&devinfo, initiator_role_id,
3058 target, saved_lun, 'A', ROLE_INITIATOR);
3059 printerror = 1;
3060
3061 scbid = ahd_get_scbptr(ahd);
3062 scb = ahd_lookup_scb(ahd, scbid);
3063 if (scb != NULL
3064 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
3065 scb = NULL;
3066
3067 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0;
3068 if (lastphase == P_MESGOUT) {
3069 u_int tag;
3070
3071 tag = SCB_LIST_NULL;
3072 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE)
3073 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) {
3074 int found;
3075 int sent_msg;
3076
3077 if (scb == NULL) {
3078 ahd_print_devinfo(ahd, &devinfo);
3079 printf("Abort for unidentified "
3080 "connection completed.\n");
3081 /* restart the sequencer. */
3082 return (1);
3083 }
3084 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1];
3085 ahd_print_path(ahd, scb);
3086 printf("SCB %d - Abort%s Completed.\n",
3087 SCB_GET_TAG(scb),
3088 sent_msg == MSG_ABORT_TAG ? "" : " Tag");
3089
3090 if (sent_msg == MSG_ABORT_TAG)
3091 tag = SCB_GET_TAG(scb);
3092
3093 if ((scb->flags & SCB_EXTERNAL_RESET) != 0) {
3094 /*
3095 * This abort is in response to an
3096 * unexpected switch to command phase
3097 * for a packetized connection. Since
3098 * the identify message was never sent,
3099 * "saved lun" is 0. We really want to
3100 * abort only the SCB that encountered
3101 * this error, which could have a different
3102 * lun. The SCB will be retried so the OS
3103 * will see the UA after renegotiating to
3104 * packetized.
3105 */
3106 tag = SCB_GET_TAG(scb);
3107 saved_lun = scb->hscb->lun;
3108 }
3109 found = ahd_abort_scbs(ahd, target, 'A', saved_lun,
3110 tag, ROLE_INITIATOR,
3111 CAM_REQ_ABORTED);
3112 printf("found == 0x%x\n", found);
3113 printerror = 0;
3114 } else if (ahd_sent_msg(ahd, AHDMSG_1B,
3115 MSG_BUS_DEV_RESET, TRUE)) {
3116 #ifdef __FreeBSD__
3117 /*
3118 * Don't mark the user's request for this BDR
3119 * as completing with CAM_BDR_SENT. CAM3
3120 * specifies CAM_REQ_CMP.
3121 */
3122 if (scb != NULL
3123 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
3124 && ahd_match_scb(ahd, scb, target, 'A',
3125 CAM_LUN_WILDCARD, SCB_LIST_NULL,
3126 ROLE_INITIATOR))
3127 ahd_set_transaction_status(scb, CAM_REQ_CMP);
3128 #endif
3129 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD,
3130 CAM_BDR_SENT, "Bus Device Reset",
3131 /*verbose_level*/0);
3132 printerror = 0;
3133 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE)
3134 && ppr_busfree == 0) {
3135 struct ahd_initiator_tinfo *tinfo;
3136 struct ahd_tmode_tstate *tstate;
3137
3138 /*
3139 * PPR Rejected.
3140 *
3141 * If the previous negotiation was packetized,
3142 * this could be because the device has been
3143 * reset without our knowledge. Force our
3144 * current negotiation to async and retry the
3145 * negotiation. Otherwise retry the command
3146 * with non-ppr negotiation.
3147 */
3148 #ifdef AHD_DEBUG
3149 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3150 printf("PPR negotiation rejected busfree.\n");
3151 #endif
3152 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
3153 devinfo.our_scsiid,
3154 devinfo.target, &tstate);
3155 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) {
3156 ahd_set_width(ahd, &devinfo,
3157 MSG_EXT_WDTR_BUS_8_BIT,
3158 AHD_TRANS_CUR,
3159 /*paused*/TRUE);
3160 ahd_set_syncrate(ahd, &devinfo,
3161 /*period*/0, /*offset*/0,
3162 /*ppr_options*/0,
3163 AHD_TRANS_CUR,
3164 /*paused*/TRUE);
3165 /*
3166 * The expect PPR busfree handler below
3167 * will effect the retry and necessary
3168 * abort.
3169 */
3170 } else {
3171 tinfo->curr.transport_version = 2;
3172 tinfo->goal.transport_version = 2;
3173 tinfo->goal.ppr_options = 0;
3174 /*
3175 * Remove any SCBs in the waiting for selection
3176 * queue that may also be for this target so
3177 * that command ordering is preserved.
3178 */
3179 ahd_freeze_devq(ahd, scb);
3180 ahd_qinfifo_requeue_tail(ahd, scb);
3181 printerror = 0;
3182 }
3183 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
3184 && ppr_busfree == 0) {
3185 /*
3186 * Negotiation Rejected. Go-narrow and
3187 * retry command.
3188 */
3189 #ifdef AHD_DEBUG
3190 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3191 printf("WDTR negotiation rejected busfree.\n");
3192 #endif
3193 ahd_set_width(ahd, &devinfo,
3194 MSG_EXT_WDTR_BUS_8_BIT,
3195 AHD_TRANS_CUR|AHD_TRANS_GOAL,
3196 /*paused*/TRUE);
3197 /*
3198 * Remove any SCBs in the waiting for selection
3199 * queue that may also be for this target so that
3200 * command ordering is preserved.
3201 */
3202 ahd_freeze_devq(ahd, scb);
3203 ahd_qinfifo_requeue_tail(ahd, scb);
3204 printerror = 0;
3205 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
3206 && ppr_busfree == 0) {
3207 /*
3208 * Negotiation Rejected. Go-async and
3209 * retry command.
3210 */
3211 #ifdef AHD_DEBUG
3212 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3213 printf("SDTR negotiation rejected busfree.\n");
3214 #endif
3215 ahd_set_syncrate(ahd, &devinfo,
3216 /*period*/0, /*offset*/0,
3217 /*ppr_options*/0,
3218 AHD_TRANS_CUR|AHD_TRANS_GOAL,
3219 /*paused*/TRUE);
3220 /*
3221 * Remove any SCBs in the waiting for selection
3222 * queue that may also be for this target so that
3223 * command ordering is preserved.
3224 */
3225 ahd_freeze_devq(ahd, scb);
3226 ahd_qinfifo_requeue_tail(ahd, scb);
3227 printerror = 0;
3228 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
3229 && ahd_sent_msg(ahd, AHDMSG_1B,
3230 MSG_INITIATOR_DET_ERR, TRUE)) {
3231
3232 #ifdef AHD_DEBUG
3233 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3234 printf("Expected IDE Busfree\n");
3235 #endif
3236 printerror = 0;
3237 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE)
3238 && ahd_sent_msg(ahd, AHDMSG_1B,
3239 MSG_MESSAGE_REJECT, TRUE)) {
3240
3241 #ifdef AHD_DEBUG
3242 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3243 printf("Expected QAS Reject Busfree\n");
3244 #endif
3245 printerror = 0;
3246 }
3247 }
3248
3249 /*
3250 * The busfree required flag is honored at the end of
3251 * the message phases. We check it last in case we
3252 * had to send some other message that caused a busfree.
3253 */
3254 if (printerror != 0
3255 && (lastphase == P_MESGIN || lastphase == P_MESGOUT)
3256 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) {
3257
3258 ahd_freeze_devq(ahd, scb);
3259 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
3260 ahd_freeze_scb(scb);
3261 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) {
3262 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
3263 SCB_GET_CHANNEL(ahd, scb),
3264 SCB_GET_LUN(scb), SCB_LIST_NULL,
3265 ROLE_INITIATOR, CAM_REQ_ABORTED);
3266 } else {
3267 #ifdef AHD_DEBUG
3268 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3269 printf("PPR Negotiation Busfree.\n");
3270 #endif
3271 ahd_done(ahd, scb);
3272 }
3273 printerror = 0;
3274 }
3275 if (printerror != 0) {
3276 int aborted;
3277
3278 aborted = 0;
3279 if (scb != NULL) {
3280 u_int tag;
3281
3282 if ((scb->hscb->control & TAG_ENB) != 0)
3283 tag = SCB_GET_TAG(scb);
3284 else
3285 tag = SCB_LIST_NULL;
3286 ahd_print_path(ahd, scb);
3287 aborted = ahd_abort_scbs(ahd, target, 'A',
3288 SCB_GET_LUN(scb), tag,
3289 ROLE_INITIATOR,
3290 CAM_UNEXP_BUSFREE);
3291 } else {
3292 /*
3293 * We had not fully identified this connection,
3294 * so we cannot abort anything.
3295 */
3296 printf("%s: ", ahd_name(ahd));
3297 }
3298 printf("Unexpected busfree %s, %d SCBs aborted, "
3299 "PRGMCNT == 0x%x\n",
3300 ahd_lookup_phase_entry(lastphase)->phasemsg,
3301 aborted,
3302 ahd_inw(ahd, PRGMCNT));
3303 ahd_dump_card_state(ahd);
3304 if (lastphase != P_BUSFREE)
3305 ahd_force_renegotiation(ahd, &devinfo);
3306 }
3307 /* Always restart the sequencer. */
3308 return (1);
3309 }
3310
3311 static void
3312 ahd_handle_proto_violation(struct ahd_softc *ahd)
3313 {
3314 struct ahd_devinfo devinfo;
3315 struct scb *scb;
3316 u_int scbid;
3317 u_int seq_flags;
3318 u_int curphase;
3319 u_int lastphase;
3320 int found;
3321
3322 ahd_fetch_devinfo(ahd, &devinfo);
3323 scbid = ahd_get_scbptr(ahd);
3324 scb = ahd_lookup_scb(ahd, scbid);
3325 seq_flags = ahd_inb(ahd, SEQ_FLAGS);
3326 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
3327 lastphase = ahd_inb(ahd, LASTPHASE);
3328 if ((seq_flags & NOT_IDENTIFIED) != 0) {
3329
3330 /*
3331 * The reconnecting target either did not send an
3332 * identify message, or did, but we didn't find an SCB
3333 * to match.
3334 */
3335 ahd_print_devinfo(ahd, &devinfo);
3336 printf("Target did not send an IDENTIFY message. "
3337 "LASTPHASE = 0x%x.\n", lastphase);
3338 scb = NULL;
3339 } else if (scb == NULL) {
3340 /*
3341 * We don't seem to have an SCB active for this
3342 * transaction. Print an error and reset the bus.
3343 */
3344 ahd_print_devinfo(ahd, &devinfo);
3345 printf("No SCB found during protocol violation\n");
3346 goto proto_violation_reset;
3347 } else {
3348 ahd_set_transaction_status(scb, CAM_SEQUENCE_FAIL);
3349 if ((seq_flags & NO_CDB_SENT) != 0) {
3350 ahd_print_path(ahd, scb);
3351 printf("No or incomplete CDB sent to device.\n");
3352 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL)
3353 & STATUS_RCVD) == 0) {
3354 /*
3355 * The target never bothered to provide status to
3356 * us prior to completing the command. Since we don't
3357 * know the disposition of this command, we must attempt
3358 * to abort it. Assert ATN and prepare to send an abort
3359 * message.
3360 */
3361 ahd_print_path(ahd, scb);
3362 printf("Completed command without status.\n");
3363 } else {
3364 ahd_print_path(ahd, scb);
3365 printf("Unknown protocol violation.\n");
3366 ahd_dump_card_state(ahd);
3367 }
3368 }
3369 if ((lastphase & ~P_DATAIN_DT) == 0
3370 || lastphase == P_COMMAND) {
3371 proto_violation_reset:
3372 /*
3373 * Target either went directly to data
3374 * phase or didn't respond to our ATN.
3375 * The only safe thing to do is to blow
3376 * it away with a bus reset.
3377 */
3378 found = ahd_reset_channel(ahd, 'A', TRUE);
3379 printf("%s: Issued Channel %c Bus Reset. "
3380 "%d SCBs aborted\n", ahd_name(ahd), 'A', found);
3381 } else {
3382 /*
3383 * Leave the selection hardware off in case
3384 * this abort attempt will affect yet to
3385 * be sent commands.
3386 */
3387 ahd_outb(ahd, SCSISEQ0,
3388 ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
3389 ahd_assert_atn(ahd);
3390 ahd_outb(ahd, MSG_OUT, HOST_MSG);
3391 if (scb == NULL) {
3392 ahd_print_devinfo(ahd, &devinfo);
3393 ahd->msgout_buf[0] = MSG_ABORT_TASK;
3394 ahd->msgout_len = 1;
3395 ahd->msgout_index = 0;
3396 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3397 } else {
3398 ahd_print_path(ahd, scb);
3399 scb->flags |= SCB_ABORT;
3400 }
3401 printf("Protocol violation %s. Attempting to abort.\n",
3402 ahd_lookup_phase_entry(curphase)->phasemsg);
3403 }
3404 }
3405
3406 /*
3407 * Force renegotiation to occur the next time we initiate
3408 * a command to the current device.
3409 */
3410 static void
3411 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3412 {
3413 struct ahd_initiator_tinfo *targ_info;
3414 struct ahd_tmode_tstate *tstate;
3415
3416 #ifdef AHD_DEBUG
3417 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3418 ahd_print_devinfo(ahd, devinfo);
3419 printf("Forcing renegotiation\n");
3420 }
3421 #endif
3422 targ_info = ahd_fetch_transinfo(ahd,
3423 devinfo->channel,
3424 devinfo->our_scsiid,
3425 devinfo->target,
3426 &tstate);
3427 ahd_update_neg_request(ahd, devinfo, tstate,
3428 targ_info, AHD_NEG_IF_NON_ASYNC);
3429 }
3430
3431 #define AHD_MAX_STEPS 2000
3432 static void
3433 ahd_clear_critical_section(struct ahd_softc *ahd)
3434 {
3435 ahd_mode_state saved_modes;
3436 int stepping;
3437 int steps;
3438 int first_instr;
3439 u_int simode0;
3440 u_int simode1;
3441 u_int simode3;
3442 u_int lqimode0;
3443 u_int lqimode1;
3444 u_int lqomode0;
3445 u_int lqomode1;
3446
3447 if (ahd->num_critical_sections == 0)
3448 return;
3449
3450 stepping = FALSE;
3451 steps = 0;
3452 first_instr = 0;
3453 simode0 = 0;
3454 simode1 = 0;
3455 simode3 = 0;
3456 lqimode0 = 0;
3457 lqimode1 = 0;
3458 lqomode0 = 0;
3459 lqomode1 = 0;
3460 saved_modes = ahd_save_modes(ahd);
3461 for (;;) {
3462 struct cs *cs;
3463 u_int seqaddr;
3464 u_int i;
3465
3466 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3467 seqaddr = ahd_inw(ahd, CURADDR);
3468
3469 cs = ahd->critical_sections;
3470 for (i = 0; i < ahd->num_critical_sections; i++, cs++) {
3471
3472 if (cs->begin < seqaddr && cs->end >= seqaddr)
3473 break;
3474 }
3475
3476 if (i == ahd->num_critical_sections)
3477 break;
3478
3479 if (steps > AHD_MAX_STEPS) {
3480 printf("%s: Infinite loop in critical section\n"
3481 "%s: First Instruction 0x%x now 0x%x\n",
3482 ahd_name(ahd), ahd_name(ahd), first_instr,
3483 seqaddr);
3484 ahd_dump_card_state(ahd);
3485 panic("critical section loop");
3486 }
3487
3488 steps++;
3489 #ifdef AHD_DEBUG
3490 if ((ahd_debug & AHD_SHOW_MISC) != 0)
3491 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd),
3492 seqaddr);
3493 #endif
3494 if (stepping == FALSE) {
3495
3496 first_instr = seqaddr;
3497 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
3498 simode0 = ahd_inb(ahd, SIMODE0);
3499 simode3 = ahd_inb(ahd, SIMODE3);
3500 lqimode0 = ahd_inb(ahd, LQIMODE0);
3501 lqimode1 = ahd_inb(ahd, LQIMODE1);
3502 lqomode0 = ahd_inb(ahd, LQOMODE0);
3503 lqomode1 = ahd_inb(ahd, LQOMODE1);
3504 ahd_outb(ahd, SIMODE0, 0);
3505 ahd_outb(ahd, SIMODE3, 0);
3506 ahd_outb(ahd, LQIMODE0, 0);
3507 ahd_outb(ahd, LQIMODE1, 0);
3508 ahd_outb(ahd, LQOMODE0, 0);
3509 ahd_outb(ahd, LQOMODE1, 0);
3510 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3511 simode1 = ahd_inb(ahd, SIMODE1);
3512 /*
3513 * We don't clear ENBUSFREE. Unfortunately
3514 * we cannot re-enable busfree detection within
3515 * the current connection, so we must leave it
3516 * on while single stepping.
3517 */
3518 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE);
3519 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP);
3520 stepping = TRUE;
3521 }
3522 ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
3523 ahd_outb(ahd, CLRINT, CLRSCSIINT);
3524 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
3525 ahd_outb(ahd, HCNTRL, ahd->unpause);
3526 while (!ahd_is_paused(ahd))
3527 ahd_delay(200);
3528 ahd_update_modes(ahd);
3529 }
3530 if (stepping) {
3531 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
3532 ahd_outb(ahd, SIMODE0, simode0);
3533 ahd_outb(ahd, SIMODE3, simode3);
3534 ahd_outb(ahd, LQIMODE0, lqimode0);
3535 ahd_outb(ahd, LQIMODE1, lqimode1);
3536 ahd_outb(ahd, LQOMODE0, lqomode0);
3537 ahd_outb(ahd, LQOMODE1, lqomode1);
3538 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3539 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
3540 ahd_outb(ahd, SIMODE1, simode1);
3541 /*
3542 * SCSIINT seems to glitch occassionally when
3543 * the interrupt masks are restored. Clear SCSIINT
3544 * one more time so that only persistent errors
3545 * are seen as a real interrupt.
3546 */
3547 ahd_outb(ahd, CLRINT, CLRSCSIINT);
3548 }
3549 ahd_restore_modes(ahd, saved_modes);
3550 }
3551
3552 /*
3553 * Clear any pending interrupt status.
3554 */
3555 static void
3556 ahd_clear_intstat(struct ahd_softc *ahd)
3557 {
3558 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
3559 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
3560 /* Clear any interrupt conditions this may have caused */
3561 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2
3562 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD);
3563 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT
3564 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI
3565 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ);
3566 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ
3567 |CLRLQOATNPKT|CLRLQOTCRC);
3568 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS
3569 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT);
3570 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
3571 ahd_outb(ahd, CLRLQOINT0, 0);
3572 ahd_outb(ahd, CLRLQOINT1, 0);
3573 }
3574 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR);
3575 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
3576 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT);
3577 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO
3578 |CLRIOERR|CLROVERRUN);
3579 ahd_outb(ahd, CLRINT, CLRSCSIINT);
3580 }
3581
3582 /**************************** Debugging Routines ******************************/
3583 #ifdef AHD_DEBUG
3584 uint32_t ahd_debug = AHD_DEBUG_OPTS;
3585 #endif
3586
3587 #if 0
3588 void
3589 ahd_print_scb(struct scb *scb)
3590 {
3591 struct hardware_scb *hscb;
3592 int i;
3593
3594 hscb = scb->hscb;
3595 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
3596 (void *)scb,
3597 hscb->control,
3598 hscb->scsiid,
3599 hscb->lun,
3600 hscb->cdb_len);
3601 printf("Shared Data: ");
3602 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++)
3603 printf("%#02x", hscb->shared_data.idata.cdb[i]);
3604 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n",
3605 (uint32_t)((ahd_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF),
3606 (uint32_t)(ahd_le64toh(hscb->dataptr) & 0xFFFFFFFF),
3607 ahd_le32toh(hscb->datacnt),
3608 ahd_le32toh(hscb->sgptr),
3609 SCB_GET_TAG(scb));
3610 ahd_dump_sglist(scb);
3611 }
3612 #endif /* 0 */
3613
3614 /************************* Transfer Negotiation *******************************/
3615 /*
3616 * Allocate per target mode instance (ID we respond to as a target)
3617 * transfer negotiation data structures.
3618 */
3619 static struct ahd_tmode_tstate *
3620 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel)
3621 {
3622 struct ahd_tmode_tstate *master_tstate;
3623 struct ahd_tmode_tstate *tstate;
3624 int i;
3625
3626 master_tstate = ahd->enabled_targets[ahd->our_id];
3627 if (ahd->enabled_targets[scsi_id] != NULL
3628 && ahd->enabled_targets[scsi_id] != master_tstate)
3629 panic("%s: ahd_alloc_tstate - Target already allocated",
3630 ahd_name(ahd));
3631 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT);
3632 if (tstate == NULL)
3633 return (NULL);
3634
3635 /*
3636 * If we have allocated a master tstate, copy user settings from
3637 * the master tstate (taken from SRAM or the EEPROM) for this
3638 * channel, but reset our current and goal settings to async/narrow
3639 * until an initiator talks to us.
3640 */
3641 if (master_tstate != NULL) {
3642 memcpy(tstate, master_tstate, sizeof(*tstate));
3643 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns));
3644 for (i = 0; i < 16; i++) {
3645 memset(&tstate->transinfo[i].curr, 0,
3646 sizeof(tstate->transinfo[i].curr));
3647 memset(&tstate->transinfo[i].goal, 0,
3648 sizeof(tstate->transinfo[i].goal));
3649 }
3650 } else
3651 memset(tstate, 0, sizeof(*tstate));
3652 ahd->enabled_targets[scsi_id] = tstate;
3653 return (tstate);
3654 }
3655
3656 #ifdef AHD_TARGET_MODE
3657 /*
3658 * Free per target mode instance (ID we respond to as a target)
3659 * transfer negotiation data structures.
3660 */
3661 static void
3662 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force)
3663 {
3664 struct ahd_tmode_tstate *tstate;
3665
3666 /*
3667 * Don't clean up our "master" tstate.
3668 * It has our default user settings.
3669 */
3670 if (scsi_id == ahd->our_id
3671 && force == FALSE)
3672 return;
3673
3674 tstate = ahd->enabled_targets[scsi_id];
3675 if (tstate != NULL)
3676 free(tstate, M_DEVBUF);
3677 ahd->enabled_targets[scsi_id] = NULL;
3678 }
3679 #endif
3680
3681 /*
3682 * Called when we have an active connection to a target on the bus,
3683 * this function finds the nearest period to the input period limited
3684 * by the capabilities of the bus connectivity of and sync settings for
3685 * the target.
3686 */
3687 static void
3688 ahd_devlimited_syncrate(struct ahd_softc *ahd,
3689 struct ahd_initiator_tinfo *tinfo,
3690 u_int *period, u_int *ppr_options, role_t role)
3691 {
3692 struct ahd_transinfo *transinfo;
3693 u_int maxsync;
3694
3695 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0
3696 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) {
3697 maxsync = AHD_SYNCRATE_PACED;
3698 } else {
3699 maxsync = AHD_SYNCRATE_ULTRA;
3700 /* Can't do DT related options on an SE bus */
3701 *ppr_options &= MSG_EXT_PPR_QAS_REQ;
3702 }
3703 /*
3704 * Never allow a value higher than our current goal
3705 * period otherwise we may allow a target initiated
3706 * negotiation to go above the limit as set by the
3707 * user. In the case of an initiator initiated
3708 * sync negotiation, we limit based on the user
3709 * setting. This allows the system to still accept
3710 * incoming negotiations even if target initiated
3711 * negotiation is not performed.
3712 */
3713 if (role == ROLE_TARGET)
3714 transinfo = &tinfo->user;
3715 else
3716 transinfo = &tinfo->goal;
3717 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN);
3718 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) {
3719 maxsync = max(maxsync, (u_int)AHD_SYNCRATE_ULTRA2);
3720 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
3721 }
3722 if (transinfo->period == 0) {
3723 *period = 0;
3724 *ppr_options = 0;
3725 } else {
3726 *period = max(*period, (u_int)transinfo->period);
3727 ahd_find_syncrate(ahd, period, ppr_options, maxsync);
3728 }
3729 }
3730
3731 /*
3732 * Look up the valid period to SCSIRATE conversion in our table.
3733 * Return the period and offset that should be sent to the target
3734 * if this was the beginning of an SDTR.
3735 */
3736 void
3737 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period,
3738 u_int *ppr_options, u_int maxsync)
3739 {
3740 if (*period < maxsync)
3741 *period = maxsync;
3742
3743 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0
3744 && *period > AHD_SYNCRATE_MIN_DT)
3745 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
3746
3747 if (*period > AHD_SYNCRATE_MIN)
3748 *period = 0;
3749
3750 /* Honor PPR option conformance rules. */
3751 if (*period > AHD_SYNCRATE_PACED)
3752 *ppr_options &= ~MSG_EXT_PPR_RTI;
3753
3754 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
3755 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ);
3756
3757 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0)
3758 *ppr_options &= MSG_EXT_PPR_QAS_REQ;
3759
3760 /* Skip all PACED only entries if IU is not available */
3761 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0
3762 && *period < AHD_SYNCRATE_DT)
3763 *period = AHD_SYNCRATE_DT;
3764
3765 /* Skip all DT only entries if DT is not available */
3766 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
3767 && *period < AHD_SYNCRATE_ULTRA2)
3768 *period = AHD_SYNCRATE_ULTRA2;
3769 }
3770
3771 /*
3772 * Truncate the given synchronous offset to a value the
3773 * current adapter type and syncrate are capable of.
3774 */
3775 static void
3776 ahd_validate_offset(struct ahd_softc *ahd,
3777 struct ahd_initiator_tinfo *tinfo,
3778 u_int period, u_int *offset, int wide,
3779 role_t role)
3780 {
3781 u_int maxoffset;
3782
3783 /* Limit offset to what we can do */
3784 if (period == 0)
3785 maxoffset = 0;
3786 else if (period <= AHD_SYNCRATE_PACED) {
3787 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0)
3788 maxoffset = MAX_OFFSET_PACED_BUG;
3789 else
3790 maxoffset = MAX_OFFSET_PACED;
3791 } else
3792 maxoffset = MAX_OFFSET_NON_PACED;
3793 *offset = min(*offset, maxoffset);
3794 if (tinfo != NULL) {
3795 if (role == ROLE_TARGET)
3796 *offset = min(*offset, (u_int)tinfo->user.offset);
3797 else
3798 *offset = min(*offset, (u_int)tinfo->goal.offset);
3799 }
3800 }
3801
3802 /*
3803 * Truncate the given transfer width parameter to a value the
3804 * current adapter type is capable of.
3805 */
3806 static void
3807 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo,
3808 u_int *bus_width, role_t role)
3809 {
3810 switch (*bus_width) {
3811 default:
3812 if (ahd->features & AHD_WIDE) {
3813 /* Respond Wide */
3814 *bus_width = MSG_EXT_WDTR_BUS_16_BIT;
3815 break;
3816 }
3817 /* FALLTHROUGH */
3818 case MSG_EXT_WDTR_BUS_8_BIT:
3819 *bus_width = MSG_EXT_WDTR_BUS_8_BIT;
3820 break;
3821 }
3822 if (tinfo != NULL) {
3823 if (role == ROLE_TARGET)
3824 *bus_width = min((u_int)tinfo->user.width, *bus_width);
3825 else
3826 *bus_width = min((u_int)tinfo->goal.width, *bus_width);
3827 }
3828 }
3829
3830 /*
3831 * Update the bitmask of targets for which the controller should
3832 * negotiate with at the next convenient oportunity. This currently
3833 * means the next time we send the initial identify messages for
3834 * a new transaction.
3835 */
3836 int
3837 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3838 struct ahd_tmode_tstate *tstate,
3839 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type)
3840 {
3841 u_int auto_negotiate_orig;
3842
3843 auto_negotiate_orig = tstate->auto_negotiate;
3844 if (neg_type == AHD_NEG_ALWAYS) {
3845 /*
3846 * Force our "current" settings to be
3847 * unknown so that unless a bus reset
3848 * occurs the need to renegotiate is
3849 * recorded persistently.
3850 */
3851 if ((ahd->features & AHD_WIDE) != 0)
3852 tinfo->curr.width = AHD_WIDTH_UNKNOWN;
3853 tinfo->curr.period = AHD_PERIOD_UNKNOWN;
3854 tinfo->curr.offset = AHD_OFFSET_UNKNOWN;
3855 }
3856 if (tinfo->curr.period != tinfo->goal.period
3857 || tinfo->curr.width != tinfo->goal.width
3858 || tinfo->curr.offset != tinfo->goal.offset
3859 || tinfo->curr.ppr_options != tinfo->goal.ppr_options
3860 || (neg_type == AHD_NEG_IF_NON_ASYNC
3861 && (tinfo->goal.offset != 0
3862 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT
3863 || tinfo->goal.ppr_options != 0)))
3864 tstate->auto_negotiate |= devinfo->target_mask;
3865 else
3866 tstate->auto_negotiate &= ~devinfo->target_mask;
3867
3868 return (auto_negotiate_orig != tstate->auto_negotiate);
3869 }
3870
3871 /*
3872 * Update the user/goal/curr tables of synchronous negotiation
3873 * parameters as well as, in the case of a current or active update,
3874 * any data structures on the host controller. In the case of an
3875 * active update, the specified target is currently talking to us on
3876 * the bus, so the transfer parameter update must take effect
3877 * immediately.
3878 */
3879 void
3880 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3881 u_int period, u_int offset, u_int ppr_options,
3882 u_int type, int paused)
3883 {
3884 struct ahd_initiator_tinfo *tinfo;
3885 struct ahd_tmode_tstate *tstate;
3886 u_int old_period;
3887 u_int old_offset;
3888 u_int old_ppr;
3889 int active;
3890 int update_needed;
3891
3892 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
3893 update_needed = 0;
3894
3895 if (period == 0 || offset == 0) {
3896 period = 0;
3897 offset = 0;
3898 }
3899
3900 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3901 devinfo->target, &tstate);
3902
3903 if ((type & AHD_TRANS_USER) != 0) {
3904 tinfo->user.period = period;
3905 tinfo->user.offset = offset;
3906 tinfo->user.ppr_options = ppr_options;
3907 }
3908
3909 if ((type & AHD_TRANS_GOAL) != 0) {
3910 tinfo->goal.period = period;
3911 tinfo->goal.offset = offset;
3912 tinfo->goal.ppr_options = ppr_options;
3913 }
3914
3915 old_period = tinfo->curr.period;
3916 old_offset = tinfo->curr.offset;
3917 old_ppr = tinfo->curr.ppr_options;
3918
3919 if ((type & AHD_TRANS_CUR) != 0
3920 && (old_period != period
3921 || old_offset != offset
3922 || old_ppr != ppr_options)) {
3923
3924 update_needed++;
3925
3926 tinfo->curr.period = period;
3927 tinfo->curr.offset = offset;
3928 tinfo->curr.ppr_options = ppr_options;
3929
3930 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3931 CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
3932 if (bootverbose) {
3933 if (offset != 0) {
3934 int options;
3935
3936 printf("%s: target %d synchronous with "
3937 "period = 0x%x, offset = 0x%x",
3938 ahd_name(ahd), devinfo->target,
3939 period, offset);
3940 options = 0;
3941 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
3942 printf("(RDSTRM");
3943 options++;
3944 }
3945 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
3946 printf("%s", options ? "|DT" : "(DT");
3947 options++;
3948 }
3949 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
3950 printf("%s", options ? "|IU" : "(IU");
3951 options++;
3952 }
3953 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) {
3954 printf("%s", options ? "|RTI" : "(RTI");
3955 options++;
3956 }
3957 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
3958 printf("%s", options ? "|QAS" : "(QAS");
3959 options++;
3960 }
3961 if (options != 0)
3962 printf(")\n");
3963 else
3964 printf("\n");
3965 } else {
3966 printf("%s: target %d using "
3967 "asynchronous transfers%s\n",
3968 ahd_name(ahd), devinfo->target,
3969 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0
3970 ? "(QAS)" : "");
3971 }
3972 }
3973 }
3974 /*
3975 * Always refresh the neg-table to handle the case of the
3976 * sequencer setting the ENATNO bit for a MK_MESSAGE request.
3977 * We will always renegotiate in that case if this is a
3978 * packetized request. Also manage the busfree expected flag
3979 * from this common routine so that we catch changes due to
3980 * WDTR or SDTR messages.
3981 */
3982 if ((type & AHD_TRANS_CUR) != 0) {
3983 if (!paused)
3984 ahd_pause(ahd);
3985 ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
3986 if (!paused)
3987 ahd_unpause(ahd);
3988 if (ahd->msg_type != MSG_TYPE_NONE) {
3989 if ((old_ppr & MSG_EXT_PPR_IU_REQ)
3990 != (ppr_options & MSG_EXT_PPR_IU_REQ)) {
3991 #ifdef AHD_DEBUG
3992 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3993 ahd_print_devinfo(ahd, devinfo);
3994 printf("Expecting IU Change busfree\n");
3995 }
3996 #endif
3997 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
3998 | MSG_FLAG_IU_REQ_CHANGED;
3999 }
4000 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) {
4001 #ifdef AHD_DEBUG
4002 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4003 printf("PPR with IU_REQ outstanding\n");
4004 #endif
4005 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE;
4006 }
4007 }
4008 }
4009
4010 update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
4011 tinfo, AHD_NEG_TO_GOAL);
4012
4013 if (update_needed && active)
4014 ahd_update_pending_scbs(ahd);
4015 }
4016
4017 /*
4018 * Update the user/goal/curr tables of wide negotiation
4019 * parameters as well as, in the case of a current or active update,
4020 * any data structures on the host controller. In the case of an
4021 * active update, the specified target is currently talking to us on
4022 * the bus, so the transfer parameter update must take effect
4023 * immediately.
4024 */
4025 void
4026 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
4027 u_int width, u_int type, int paused)
4028 {
4029 struct ahd_initiator_tinfo *tinfo;
4030 struct ahd_tmode_tstate *tstate;
4031 u_int oldwidth;
4032 int active;
4033 int update_needed;
4034
4035 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
4036 update_needed = 0;
4037 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
4038 devinfo->target, &tstate);
4039
4040 if ((type & AHD_TRANS_USER) != 0)
4041 tinfo->user.width = width;
4042
4043 if ((type & AHD_TRANS_GOAL) != 0)
4044 tinfo->goal.width = width;
4045
4046 oldwidth = tinfo->curr.width;
4047 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) {
4048
4049 update_needed++;
4050
4051 tinfo->curr.width = width;
4052 ahd_send_async(ahd, devinfo->channel, devinfo->target,
4053 CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
4054 if (bootverbose) {
4055 printf("%s: target %d using %dbit transfers\n",
4056 ahd_name(ahd), devinfo->target,
4057 8 * (0x01 << width));
4058 }
4059 }
4060
4061 if ((type & AHD_TRANS_CUR) != 0) {
4062 if (!paused)
4063 ahd_pause(ahd);
4064 ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
4065 if (!paused)
4066 ahd_unpause(ahd);
4067 }
4068
4069 update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
4070 tinfo, AHD_NEG_TO_GOAL);
4071 if (update_needed && active)
4072 ahd_update_pending_scbs(ahd);
4073
4074 }
4075
4076 /*
4077 * Update the current state of tagged queuing for a given target.
4078 */
4079 static void
4080 ahd_set_tags(struct ahd_softc *ahd, struct scsi_cmnd *cmd,
4081 struct ahd_devinfo *devinfo, ahd_queue_alg alg)
4082 {
4083 struct scsi_device *sdev = cmd->device;
4084
4085 ahd_platform_set_tags(ahd, sdev, devinfo, alg);
4086 ahd_send_async(ahd, devinfo->channel, devinfo->target,
4087 devinfo->lun, AC_TRANSFER_NEG);
4088 }
4089
4090 static void
4091 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
4092 struct ahd_transinfo *tinfo)
4093 {
4094 ahd_mode_state saved_modes;
4095 u_int period;
4096 u_int ppr_opts;
4097 u_int con_opts;
4098 u_int offset;
4099 u_int saved_negoaddr;
4100 uint8_t iocell_opts[sizeof(ahd->iocell_opts)];
4101
4102 saved_modes = ahd_save_modes(ahd);
4103 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
4104
4105 saved_negoaddr = ahd_inb(ahd, NEGOADDR);
4106 ahd_outb(ahd, NEGOADDR, devinfo->target);
4107 period = tinfo->period;
4108 offset = tinfo->offset;
4109 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts));
4110 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ
4111 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI);
4112 con_opts = 0;
4113 if (period == 0)
4114 period = AHD_SYNCRATE_ASYNC;
4115 if (period == AHD_SYNCRATE_160) {
4116
4117 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
4118 /*
4119 * When the SPI4 spec was finalized, PACE transfers
4120 * was not made a configurable option in the PPR
4121 * message. Instead it is assumed to be enabled for
4122 * any syncrate faster than 80MHz. Nevertheless,
4123 * Harpoon2A4 allows this to be configurable.
4124 *
4125 * Harpoon2A4 also assumes at most 2 data bytes per
4126 * negotiated REQ/ACK offset. Paced transfers take
4127 * 4, so we must adjust our offset.
4128 */
4129 ppr_opts |= PPROPT_PACE;
4130 offset *= 2;
4131
4132 /*
4133 * Harpoon2A assumed that there would be a
4134 * fallback rate between 160MHz and 80MHz,
4135 * so 7 is used as the period factor rather
4136 * than 8 for 160MHz.
4137 */
4138 period = AHD_SYNCRATE_REVA_160;
4139 }
4140 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0)
4141 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
4142 ~AHD_PRECOMP_MASK;
4143 } else {
4144 /*
4145 * Precomp should be disabled for non-paced transfers.
4146 */
4147 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK;
4148
4149 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0
4150 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0
4151 && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) {
4152 /*
4153 * Slow down our CRC interval to be
4154 * compatible with non-packetized
4155 * U160 devices that can't handle a
4156 * CRC at full speed.
4157 */
4158 con_opts |= ENSLOWCRC;
4159 }
4160
4161 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
4162 /*
4163 * On H2A4, revert to a slower slewrate
4164 * on non-paced transfers.
4165 */
4166 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
4167 ~AHD_SLEWRATE_MASK;
4168 }
4169 }
4170
4171 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW);
4172 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]);
4173 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE);
4174 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]);
4175
4176 ahd_outb(ahd, NEGPERIOD, period);
4177 ahd_outb(ahd, NEGPPROPTS, ppr_opts);
4178 ahd_outb(ahd, NEGOFFSET, offset);
4179
4180 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT)
4181 con_opts |= WIDEXFER;
4182
4183 /*
4184 * Slow down our CRC interval to be
4185 * compatible with packetized U320 devices
4186 * that can't handle a CRC at full speed
4187 */
4188 if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
4189 con_opts |= ENSLOWCRC;
4190 }
4191
4192 /*
4193 * During packetized transfers, the target will
4194 * give us the oportunity to send command packets
4195 * without us asserting attention.
4196 */
4197 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
4198 con_opts |= ENAUTOATNO;
4199 ahd_outb(ahd, NEGCONOPTS, con_opts);
4200 ahd_outb(ahd, NEGOADDR, saved_negoaddr);
4201 ahd_restore_modes(ahd, saved_modes);
4202 }
4203
4204 /*
4205 * When the transfer settings for a connection change, setup for
4206 * negotiation in pending SCBs to effect the change as quickly as
4207 * possible. We also cancel any negotiations that are scheduled
4208 * for inflight SCBs that have not been started yet.
4209 */
4210 static void
4211 ahd_update_pending_scbs(struct ahd_softc *ahd)
4212 {
4213 struct scb *pending_scb;
4214 int pending_scb_count;
4215 int paused;
4216 u_int saved_scbptr;
4217 ahd_mode_state saved_modes;
4218
4219 /*
4220 * Traverse the pending SCB list and ensure that all of the
4221 * SCBs there have the proper settings. We can only safely
4222 * clear the negotiation required flag (setting requires the
4223 * execution queue to be modified) and this is only possible
4224 * if we are not already attempting to select out for this
4225 * SCB. For this reason, all callers only call this routine
4226 * if we are changing the negotiation settings for the currently
4227 * active transaction on the bus.
4228 */
4229 pending_scb_count = 0;
4230 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
4231 struct ahd_devinfo devinfo;
4232 struct ahd_initiator_tinfo *tinfo;
4233 struct ahd_tmode_tstate *tstate;
4234
4235 ahd_scb_devinfo(ahd, &devinfo, pending_scb);
4236 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
4237 devinfo.our_scsiid,
4238 devinfo.target, &tstate);
4239 if ((tstate->auto_negotiate & devinfo.target_mask) == 0
4240 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
4241 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
4242 pending_scb->hscb->control &= ~MK_MESSAGE;
4243 }
4244 ahd_sync_scb(ahd, pending_scb,
4245 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
4246 pending_scb_count++;
4247 }
4248
4249 if (pending_scb_count == 0)
4250 return;
4251
4252 if (ahd_is_paused(ahd)) {
4253 paused = 1;
4254 } else {
4255 paused = 0;
4256 ahd_pause(ahd);
4257 }
4258
4259 /*
4260 * Force the sequencer to reinitialize the selection for
4261 * the command at the head of the execution queue if it
4262 * has already been setup. The negotiation changes may
4263 * effect whether we select-out with ATN. It is only
4264 * safe to clear ENSELO when the bus is not free and no
4265 * selection is in progres or completed.
4266 */
4267 saved_modes = ahd_save_modes(ahd);
4268 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
4269 if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0
4270 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0)
4271 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
4272 saved_scbptr = ahd_get_scbptr(ahd);
4273 /* Ensure that the hscbs down on the card match the new information */
4274 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
4275 u_int scb_tag;
4276 u_int control;
4277
4278 scb_tag = SCB_GET_TAG(pending_scb);
4279 ahd_set_scbptr(ahd, scb_tag);
4280 control = ahd_inb_scbram(ahd, SCB_CONTROL);
4281 control &= ~MK_MESSAGE;
4282 control |= pending_scb->hscb->control & MK_MESSAGE;
4283 ahd_outb(ahd, SCB_CONTROL, control);
4284 }
4285 ahd_set_scbptr(ahd, saved_scbptr);
4286 ahd_restore_modes(ahd, saved_modes);
4287
4288 if (paused == 0)
4289 ahd_unpause(ahd);
4290 }
4291
4292 /**************************** Pathing Information *****************************/
4293 static void
4294 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4295 {
4296 ahd_mode_state saved_modes;
4297 u_int saved_scsiid;
4298 role_t role;
4299 int our_id;
4300
4301 saved_modes = ahd_save_modes(ahd);
4302 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
4303
4304 if (ahd_inb(ahd, SSTAT0) & TARGET)
4305 role = ROLE_TARGET;
4306 else
4307 role = ROLE_INITIATOR;
4308
4309 if (role == ROLE_TARGET
4310 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) {
4311 /* We were selected, so pull our id from TARGIDIN */
4312 our_id = ahd_inb(ahd, TARGIDIN) & OID;
4313 } else if (role == ROLE_TARGET)
4314 our_id = ahd_inb(ahd, TOWNID);
4315 else
4316 our_id = ahd_inb(ahd, IOWNID);
4317
4318 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
4319 ahd_compile_devinfo(devinfo,
4320 our_id,
4321 SCSIID_TARGET(ahd, saved_scsiid),
4322 ahd_inb(ahd, SAVED_LUN),
4323 SCSIID_CHANNEL(ahd, saved_scsiid),
4324 role);
4325 ahd_restore_modes(ahd, saved_modes);
4326 }
4327
4328 void
4329 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4330 {
4331 printf("%s:%c:%d:%d: ", ahd_name(ahd), 'A',
4332 devinfo->target, devinfo->lun);
4333 }
4334
4335 static const struct ahd_phase_table_entry*
4336 ahd_lookup_phase_entry(int phase)
4337 {
4338 const struct ahd_phase_table_entry *entry;
4339 const struct ahd_phase_table_entry *last_entry;
4340
4341 /*
4342 * num_phases doesn't include the default entry which
4343 * will be returned if the phase doesn't match.
4344 */
4345 last_entry = &ahd_phase_table[num_phases];
4346 for (entry = ahd_phase_table; entry < last_entry; entry++) {
4347 if (phase == entry->phase)
4348 break;
4349 }
4350 return (entry);
4351 }
4352
4353 void
4354 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target,
4355 u_int lun, char channel, role_t role)
4356 {
4357 devinfo->our_scsiid = our_id;
4358 devinfo->target = target;
4359 devinfo->lun = lun;
4360 devinfo->target_offset = target;
4361 devinfo->channel = channel;
4362 devinfo->role = role;
4363 if (channel == 'B')
4364 devinfo->target_offset += 8;
4365 devinfo->target_mask = (0x01 << devinfo->target_offset);
4366 }
4367
4368 static void
4369 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
4370 struct scb *scb)
4371 {
4372 role_t role;
4373 int our_id;
4374
4375 our_id = SCSIID_OUR_ID(scb->hscb->scsiid);
4376 role = ROLE_INITIATOR;
4377 if ((scb->hscb->control & TARGET_SCB) != 0)
4378 role = ROLE_TARGET;
4379 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb),
4380 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role);
4381 }
4382
4383
4384 /************************ Message Phase Processing ****************************/
4385 /*
4386 * When an initiator transaction with the MK_MESSAGE flag either reconnects
4387 * or enters the initial message out phase, we are interrupted. Fill our
4388 * outgoing message buffer with the appropriate message and beging handing
4389 * the message phase(s) manually.
4390 */
4391 static void
4392 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
4393 struct scb *scb)
4394 {
4395 /*
4396 * To facilitate adding multiple messages together,
4397 * each routine should increment the index and len
4398 * variables instead of setting them explicitly.
4399 */
4400 ahd->msgout_index = 0;
4401 ahd->msgout_len = 0;
4402
4403 if (ahd_currently_packetized(ahd))
4404 ahd->msg_flags |= MSG_FLAG_PACKETIZED;
4405
4406 if (ahd->send_msg_perror
4407 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) {
4408 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror;
4409 ahd->msgout_len++;
4410 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
4411 #ifdef AHD_DEBUG
4412 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4413 printf("Setting up for Parity Error delivery\n");
4414 #endif
4415 return;
4416 } else if (scb == NULL) {
4417 printf("%s: WARNING. No pending message for "
4418 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd));
4419 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP;
4420 ahd->msgout_len++;
4421 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
4422 return;
4423 }
4424
4425 if ((scb->flags & SCB_DEVICE_RESET) == 0
4426 && (scb->flags & SCB_PACKETIZED) == 0
4427 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) {
4428 u_int identify_msg;
4429
4430 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
4431 if ((scb->hscb->control & DISCENB) != 0)
4432 identify_msg |= MSG_IDENTIFY_DISCFLAG;
4433 ahd->msgout_buf[ahd->msgout_index++] = identify_msg;
4434 ahd->msgout_len++;
4435
4436 if ((scb->hscb->control & TAG_ENB) != 0) {
4437 ahd->msgout_buf[ahd->msgout_index++] =
4438 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE);
4439 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb);
4440 ahd->msgout_len += 2;
4441 }
4442 }
4443
4444 if (scb->flags & SCB_DEVICE_RESET) {
4445 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET;
4446 ahd->msgout_len++;
4447 ahd_print_path(ahd, scb);
4448 printf("Bus Device Reset Message Sent\n");
4449 /*
4450 * Clear our selection hardware in advance of
4451 * the busfree. We may have an entry in the waiting
4452 * Q for this target, and we don't want to go about
4453 * selecting while we handle the busfree and blow it
4454 * away.
4455 */
4456 ahd_outb(ahd, SCSISEQ0, 0);
4457 } else if ((scb->flags & SCB_ABORT) != 0) {
4458
4459 if ((scb->hscb->control & TAG_ENB) != 0) {
4460 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG;
4461 } else {
4462 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT;
4463 }
4464 ahd->msgout_len++;
4465 ahd_print_path(ahd, scb);
4466 printf("Abort%s Message Sent\n",
4467 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : "");
4468 /*
4469 * Clear our selection hardware in advance of
4470 * the busfree. We may have an entry in the waiting
4471 * Q for this target, and we don't want to go about
4472 * selecting while we handle the busfree and blow it
4473 * away.
4474 */
4475 ahd_outb(ahd, SCSISEQ0, 0);
4476 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) {
4477 ahd_build_transfer_msg(ahd, devinfo);
4478 /*
4479 * Clear our selection hardware in advance of potential
4480 * PPR IU status change busfree. We may have an entry in
4481 * the waiting Q for this target, and we don't want to go
4482 * about selecting while we handle the busfree and blow
4483 * it away.
4484 */
4485 ahd_outb(ahd, SCSISEQ0, 0);
4486 } else {
4487 printf("ahd_intr: AWAITING_MSG for an SCB that "
4488 "does not have a waiting message\n");
4489 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
4490 devinfo->target_mask);
4491 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x "
4492 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control,
4493 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT),
4494 scb->flags);
4495 }
4496
4497 /*
4498 * Clear the MK_MESSAGE flag from the SCB so we aren't
4499 * asked to send this message again.
4500 */
4501 ahd_outb(ahd, SCB_CONTROL,
4502 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
4503 scb->hscb->control &= ~MK_MESSAGE;
4504 ahd->msgout_index = 0;
4505 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
4506 }
4507
4508 /*
4509 * Build an appropriate transfer negotiation message for the
4510 * currently active target.
4511 */
4512 static void
4513 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4514 {
4515 /*
4516 * We need to initiate transfer negotiations.
4517 * If our current and goal settings are identical,
4518 * we want to renegotiate due to a check condition.
4519 */
4520 struct ahd_initiator_tinfo *tinfo;
4521 struct ahd_tmode_tstate *tstate;
4522 int dowide;
4523 int dosync;
4524 int doppr;
4525 u_int period;
4526 u_int ppr_options;
4527 u_int offset;
4528
4529 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
4530 devinfo->target, &tstate);
4531 /*
4532 * Filter our period based on the current connection.
4533 * If we can't perform DT transfers on this segment (not in LVD
4534 * mode for instance), then our decision to issue a PPR message
4535 * may change.
4536 */
4537 period = tinfo->goal.period;
4538 offset = tinfo->goal.offset;
4539 ppr_options = tinfo->goal.ppr_options;
4540 /* Target initiated PPR is not allowed in the SCSI spec */
4541 if (devinfo->role == ROLE_TARGET)
4542 ppr_options = 0;
4543 ahd_devlimited_syncrate(ahd, tinfo, &period,
4544 &ppr_options, devinfo->role);
4545 dowide = tinfo->curr.width != tinfo->goal.width;
4546 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period;
4547 /*
4548 * Only use PPR if we have options that need it, even if the device
4549 * claims to support it. There might be an expander in the way
4550 * that doesn't.
4551 */
4552 doppr = ppr_options != 0;
4553
4554 if (!dowide && !dosync && !doppr) {
4555 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
4556 dosync = tinfo->goal.offset != 0;
4557 }
4558
4559 if (!dowide && !dosync && !doppr) {
4560 /*
4561 * Force async with a WDTR message if we have a wide bus,
4562 * or just issue an SDTR with a 0 offset.
4563 */
4564 if ((ahd->features & AHD_WIDE) != 0)
4565 dowide = 1;
4566 else
4567 dosync = 1;
4568
4569 if (bootverbose) {
4570 ahd_print_devinfo(ahd, devinfo);
4571 printf("Ensuring async\n");
4572 }
4573 }
4574 /* Target initiated PPR is not allowed in the SCSI spec */
4575 if (devinfo->role == ROLE_TARGET)
4576 doppr = 0;
4577
4578 /*
4579 * Both the PPR message and SDTR message require the
4580 * goal syncrate to be limited to what the target device
4581 * is capable of handling (based on whether an LVD->SE
4582 * expander is on the bus), so combine these two cases.
4583 * Regardless, guarantee that if we are using WDTR and SDTR
4584 * messages that WDTR comes first.
4585 */
4586 if (doppr || (dosync && !dowide)) {
4587
4588 offset = tinfo->goal.offset;
4589 ahd_validate_offset(ahd, tinfo, period, &offset,
4590 doppr ? tinfo->goal.width
4591 : tinfo->curr.width,
4592 devinfo->role);
4593 if (doppr) {
4594 ahd_construct_ppr(ahd, devinfo, period, offset,
4595 tinfo->goal.width, ppr_options);
4596 } else {
4597 ahd_construct_sdtr(ahd, devinfo, period, offset);
4598 }
4599 } else {
4600 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width);
4601 }
4602 }
4603
4604 /*
4605 * Build a synchronous negotiation message in our message
4606 * buffer based on the input parameters.
4607 */
4608 static void
4609 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
4610 u_int period, u_int offset)
4611 {
4612 if (offset == 0)
4613 period = AHD_ASYNC_XFER_PERIOD;
4614 ahd->msgout_index += spi_populate_sync_msg(
4615 ahd->msgout_buf + ahd->msgout_index, period, offset);
4616 ahd->msgout_len += 5;
4617 if (bootverbose) {
4618 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
4619 ahd_name(ahd), devinfo->channel, devinfo->target,
4620 devinfo->lun, period, offset);
4621 }
4622 }
4623
4624 /*
4625 * Build a wide negotiateion message in our message
4626 * buffer based on the input parameters.
4627 */
4628 static void
4629 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
4630 u_int bus_width)
4631 {
4632 ahd->msgout_index += spi_populate_width_msg(
4633 ahd->msgout_buf + ahd->msgout_index, bus_width);
4634 ahd->msgout_len += 4;
4635 if (bootverbose) {
4636 printf("(%s:%c:%d:%d): Sending WDTR %x\n",
4637 ahd_name(ahd), devinfo->channel, devinfo->target,
4638 devinfo->lun, bus_width);
4639 }
4640 }
4641
4642 /*
4643 * Build a parallel protocol request message in our message
4644 * buffer based on the input parameters.
4645 */
4646 static void
4647 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
4648 u_int period, u_int offset, u_int bus_width,
4649 u_int ppr_options)
4650 {
4651 /*
4652 * Always request precompensation from
4653 * the other target if we are running
4654 * at paced syncrates.
4655 */
4656 if (period <= AHD_SYNCRATE_PACED)
4657 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
4658 if (offset == 0)
4659 period = AHD_ASYNC_XFER_PERIOD;
4660 ahd->msgout_index += spi_populate_ppr_msg(
4661 ahd->msgout_buf + ahd->msgout_index, period, offset,
4662 bus_width, ppr_options);
4663 ahd->msgout_len += 8;
4664 if (bootverbose) {
4665 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
4666 "offset %x, ppr_options %x\n", ahd_name(ahd),
4667 devinfo->channel, devinfo->target, devinfo->lun,
4668 bus_width, period, offset, ppr_options);
4669 }
4670 }
4671
4672 /*
4673 * Clear any active message state.
4674 */
4675 static void
4676 ahd_clear_msg_state(struct ahd_softc *ahd)
4677 {
4678 ahd_mode_state saved_modes;
4679
4680 saved_modes = ahd_save_modes(ahd);
4681 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
4682 ahd->send_msg_perror = 0;
4683 ahd->msg_flags = MSG_FLAG_NONE;
4684 ahd->msgout_len = 0;
4685 ahd->msgin_index = 0;
4686 ahd->msg_type = MSG_TYPE_NONE;
4687 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
4688 /*
4689 * The target didn't care to respond to our
4690 * message request, so clear ATN.
4691 */
4692 ahd_outb(ahd, CLRSINT1, CLRATNO);
4693 }
4694 ahd_outb(ahd, MSG_OUT, MSG_NOOP);
4695 ahd_outb(ahd, SEQ_FLAGS2,
4696 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING);
4697 ahd_restore_modes(ahd, saved_modes);
4698 }
4699
4700 /*
4701 * Manual message loop handler.
4702 */
4703 static void
4704 ahd_handle_message_phase(struct ahd_softc *ahd)
4705 {
4706 struct ahd_devinfo devinfo;
4707 u_int bus_phase;
4708 int end_session;
4709
4710 ahd_fetch_devinfo(ahd, &devinfo);
4711 end_session = FALSE;
4712 bus_phase = ahd_inb(ahd, LASTPHASE);
4713
4714 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) {
4715 printf("LQIRETRY for LQIPHASE_OUTPKT\n");
4716 ahd_outb(ahd, LQCTL2, LQIRETRY);
4717 }
4718 reswitch:
4719 switch (ahd->msg_type) {
4720 case MSG_TYPE_INITIATOR_MSGOUT:
4721 {
4722 int lastbyte;
4723 int phasemis;
4724 int msgdone;
4725
4726 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0)
4727 panic("HOST_MSG_LOOP interrupt with no active message");
4728
4729 #ifdef AHD_DEBUG
4730 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4731 ahd_print_devinfo(ahd, &devinfo);
4732 printf("INITIATOR_MSG_OUT");
4733 }
4734 #endif
4735 phasemis = bus_phase != P_MESGOUT;
4736 if (phasemis) {
4737 #ifdef AHD_DEBUG
4738 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4739 printf(" PHASEMIS %s\n",
4740 ahd_lookup_phase_entry(bus_phase)
4741 ->phasemsg);
4742 }
4743 #endif
4744 if (bus_phase == P_MESGIN) {
4745 /*
4746 * Change gears and see if
4747 * this messages is of interest to
4748 * us or should be passed back to
4749 * the sequencer.
4750 */
4751 ahd_outb(ahd, CLRSINT1, CLRATNO);
4752 ahd->send_msg_perror = 0;
4753 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN;
4754 ahd->msgin_index = 0;
4755 goto reswitch;
4756 }
4757 end_session = TRUE;
4758 break;
4759 }
4760
4761 if (ahd->send_msg_perror) {
4762 ahd_outb(ahd, CLRSINT1, CLRATNO);
4763 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
4764 #ifdef AHD_DEBUG
4765 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4766 printf(" byte 0x%x\n", ahd->send_msg_perror);
4767 #endif
4768 /*
4769 * If we are notifying the target of a CRC error
4770 * during packetized operations, the target is
4771 * within its rights to acknowledge our message
4772 * with a busfree.
4773 */
4774 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0
4775 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR)
4776 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE;
4777
4778 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror);
4779 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
4780 break;
4781 }
4782
4783 msgdone = ahd->msgout_index == ahd->msgout_len;
4784 if (msgdone) {
4785 /*
4786 * The target has requested a retry.
4787 * Re-assert ATN, reset our message index to
4788 * 0, and try again.
4789 */
4790 ahd->msgout_index = 0;
4791 ahd_assert_atn(ahd);
4792 }
4793
4794 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1);
4795 if (lastbyte) {
4796 /* Last byte is signified by dropping ATN */
4797 ahd_outb(ahd, CLRSINT1, CLRATNO);
4798 }
4799
4800 /*
4801 * Clear our interrupt status and present
4802 * the next byte on the bus.
4803 */
4804 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
4805 #ifdef AHD_DEBUG
4806 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4807 printf(" byte 0x%x\n",
4808 ahd->msgout_buf[ahd->msgout_index]);
4809 #endif
4810 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]);
4811 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
4812 break;
4813 }
4814 case MSG_TYPE_INITIATOR_MSGIN:
4815 {
4816 int phasemis;
4817 int message_done;
4818
4819 #ifdef AHD_DEBUG
4820 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4821 ahd_print_devinfo(ahd, &devinfo);
4822 printf("INITIATOR_MSG_IN");
4823 }
4824 #endif
4825 phasemis = bus_phase != P_MESGIN;
4826 if (phasemis) {
4827 #ifdef AHD_DEBUG
4828 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4829 printf(" PHASEMIS %s\n",
4830 ahd_lookup_phase_entry(bus_phase)
4831 ->phasemsg);
4832 }
4833 #endif
4834 ahd->msgin_index = 0;
4835 if (bus_phase == P_MESGOUT
4836 && (ahd->send_msg_perror != 0
4837 || (ahd->msgout_len != 0
4838 && ahd->msgout_index == 0))) {
4839 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
4840 goto reswitch;
4841 }
4842 end_session = TRUE;
4843 break;
4844 }
4845
4846 /* Pull the byte in without acking it */
4847 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS);
4848 #ifdef AHD_DEBUG
4849 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4850 printf(" byte 0x%x\n",
4851 ahd->msgin_buf[ahd->msgin_index]);
4852 #endif
4853
4854 message_done = ahd_parse_msg(ahd, &devinfo);
4855
4856 if (message_done) {
4857 /*
4858 * Clear our incoming message buffer in case there
4859 * is another message following this one.
4860 */
4861 ahd->msgin_index = 0;
4862
4863 /*
4864 * If this message illicited a response,
4865 * assert ATN so the target takes us to the
4866 * message out phase.
4867 */
4868 if (ahd->msgout_len != 0) {
4869 #ifdef AHD_DEBUG
4870 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4871 ahd_print_devinfo(ahd, &devinfo);
4872 printf("Asserting ATN for response\n");
4873 }
4874 #endif
4875 ahd_assert_atn(ahd);
4876 }
4877 } else
4878 ahd->msgin_index++;
4879
4880 if (message_done == MSGLOOP_TERMINATED) {
4881 end_session = TRUE;
4882 } else {
4883 /* Ack the byte */
4884 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
4885 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ);
4886 }
4887 break;
4888 }
4889 case MSG_TYPE_TARGET_MSGIN:
4890 {
4891 int msgdone;
4892 int msgout_request;
4893
4894 /*
4895 * By default, the message loop will continue.
4896 */
4897 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
4898
4899 if (ahd->msgout_len == 0)
4900 panic("Target MSGIN with no active message");
4901
4902 /*
4903 * If we interrupted a mesgout session, the initiator
4904 * will not know this until our first REQ. So, we
4905 * only honor mesgout requests after we've sent our
4906 * first byte.
4907 */
4908 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0
4909 && ahd->msgout_index > 0)
4910 msgout_request = TRUE;
4911 else
4912 msgout_request = FALSE;
4913
4914 if (msgout_request) {
4915
4916 /*
4917 * Change gears and see if
4918 * this messages is of interest to
4919 * us or should be passed back to
4920 * the sequencer.
4921 */
4922 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT;
4923 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO);
4924 ahd->msgin_index = 0;
4925 /* Dummy read to REQ for first byte */
4926 ahd_inb(ahd, SCSIDAT);
4927 ahd_outb(ahd, SXFRCTL0,
4928 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4929 break;
4930 }
4931
4932 msgdone = ahd->msgout_index == ahd->msgout_len;
4933 if (msgdone) {
4934 ahd_outb(ahd, SXFRCTL0,
4935 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
4936 end_session = TRUE;
4937 break;
4938 }
4939
4940 /*
4941 * Present the next byte on the bus.
4942 */
4943 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4944 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]);
4945 break;
4946 }
4947 case MSG_TYPE_TARGET_MSGOUT:
4948 {
4949 int lastbyte;
4950 int msgdone;
4951
4952 /*
4953 * By default, the message loop will continue.
4954 */
4955 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
4956
4957 /*
4958 * The initiator signals that this is
4959 * the last byte by dropping ATN.
4960 */
4961 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0;
4962
4963 /*
4964 * Read the latched byte, but turn off SPIOEN first
4965 * so that we don't inadvertently cause a REQ for the
4966 * next byte.
4967 */
4968 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
4969 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT);
4970 msgdone = ahd_parse_msg(ahd, &devinfo);
4971 if (msgdone == MSGLOOP_TERMINATED) {
4972 /*
4973 * The message is *really* done in that it caused
4974 * us to go to bus free. The sequencer has already
4975 * been reset at this point, so pull the ejection
4976 * handle.
4977 */
4978 return;
4979 }
4980
4981 ahd->msgin_index++;
4982
4983 /*
4984 * XXX Read spec about initiator dropping ATN too soon
4985 * and use msgdone to detect it.
4986 */
4987 if (msgdone == MSGLOOP_MSGCOMPLETE) {
4988 ahd->msgin_index = 0;
4989
4990 /*
4991 * If this message illicited a response, transition
4992 * to the Message in phase and send it.
4993 */
4994 if (ahd->msgout_len != 0) {
4995 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO);
4996 ahd_outb(ahd, SXFRCTL0,
4997 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4998 ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
4999 ahd->msgin_index = 0;
5000 break;
5001 }
5002 }
5003
5004 if (lastbyte)
5005 end_session = TRUE;
5006 else {
5007 /* Ask for the next byte. */
5008 ahd_outb(ahd, SXFRCTL0,
5009 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
5010 }
5011
5012 break;
5013 }
5014 default:
5015 panic("Unknown REQINIT message type");
5016 }
5017
5018 if (end_session) {
5019 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) {
5020 printf("%s: Returning to Idle Loop\n",
5021 ahd_name(ahd));
5022 ahd_clear_msg_state(ahd);
5023
5024 /*
5025 * Perform the equivalent of a clear_target_state.
5026 */
5027 ahd_outb(ahd, LASTPHASE, P_BUSFREE);
5028 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT);
5029 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
5030 } else {
5031 ahd_clear_msg_state(ahd);
5032 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP);
5033 }
5034 }
5035 }
5036
5037 /*
5038 * See if we sent a particular extended message to the target.
5039 * If "full" is true, return true only if the target saw the full
5040 * message. If "full" is false, return true if the target saw at
5041 * least the first byte of the message.
5042 */
5043 static int
5044 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full)
5045 {
5046 int found;
5047 u_int index;
5048
5049 found = FALSE;
5050 index = 0;
5051
5052 while (index < ahd->msgout_len) {
5053 if (ahd->msgout_buf[index] == MSG_EXTENDED) {
5054 u_int end_index;
5055
5056 end_index = index + 1 + ahd->msgout_buf[index + 1];
5057 if (ahd->msgout_buf[index+2] == msgval
5058 && type == AHDMSG_EXT) {
5059
5060 if (full) {
5061 if (ahd->msgout_index > end_index)
5062 found = TRUE;
5063 } else if (ahd->msgout_index > index)
5064 found = TRUE;
5065 }
5066 index = end_index;
5067 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK
5068 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) {
5069
5070 /* Skip tag type and tag id or residue param*/
5071 index += 2;
5072 } else {
5073 /* Single byte message */
5074 if (type == AHDMSG_1B
5075 && ahd->msgout_index > index
5076 && (ahd->msgout_buf[index] == msgval
5077 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0
5078 && msgval == MSG_IDENTIFYFLAG)))
5079 found = TRUE;
5080 index++;
5081 }
5082
5083 if (found)
5084 break;
5085 }
5086 return (found);
5087 }
5088
5089 /*
5090 * Wait for a complete incoming message, parse it, and respond accordingly.
5091 */
5092 static int
5093 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
5094 {
5095 struct ahd_initiator_tinfo *tinfo;
5096 struct ahd_tmode_tstate *tstate;
5097 int reject;
5098 int done;
5099 int response;
5100
5101 done = MSGLOOP_IN_PROG;
5102 response = FALSE;
5103 reject = FALSE;
5104 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
5105 devinfo->target, &tstate);
5106
5107 /*
5108 * Parse as much of the message as is available,
5109 * rejecting it if we don't support it. When
5110 * the entire message is available and has been
5111 * handled, return MSGLOOP_MSGCOMPLETE, indicating
5112 * that we have parsed an entire message.
5113 *
5114 * In the case of extended messages, we accept the length
5115 * byte outright and perform more checking once we know the
5116 * extended message type.
5117 */
5118 switch (ahd->msgin_buf[0]) {
5119 case MSG_DISCONNECT:
5120 case MSG_SAVEDATAPOINTER:
5121 case MSG_CMDCOMPLETE:
5122 case MSG_RESTOREPOINTERS:
5123 case MSG_IGN_WIDE_RESIDUE:
5124 /*
5125 * End our message loop as these are messages
5126 * the sequencer handles on its own.
5127 */
5128 done = MSGLOOP_TERMINATED;
5129 break;
5130 case MSG_MESSAGE_REJECT:
5131 response = ahd_handle_msg_reject(ahd, devinfo);
5132 /* FALLTHROUGH */
5133 case MSG_NOOP:
5134 done = MSGLOOP_MSGCOMPLETE;
5135 break;
5136 case MSG_EXTENDED:
5137 {
5138 /* Wait for enough of the message to begin validation */
5139 if (ahd->msgin_index < 2)
5140 break;
5141 switch (ahd->msgin_buf[2]) {
5142 case MSG_EXT_SDTR:
5143 {
5144 u_int period;
5145 u_int ppr_options;
5146 u_int offset;
5147 u_int saved_offset;
5148
5149 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
5150 reject = TRUE;
5151 break;
5152 }
5153
5154 /*
5155 * Wait until we have both args before validating
5156 * and acting on this message.
5157 *
5158 * Add one to MSG_EXT_SDTR_LEN to account for
5159 * the extended message preamble.
5160 */
5161 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1))
5162 break;
5163
5164 period = ahd->msgin_buf[3];
5165 ppr_options = 0;
5166 saved_offset = offset = ahd->msgin_buf[4];
5167 ahd_devlimited_syncrate(ahd, tinfo, &period,
5168 &ppr_options, devinfo->role);
5169 ahd_validate_offset(ahd, tinfo, period, &offset,
5170 tinfo->curr.width, devinfo->role);
5171 if (bootverbose) {
5172 printf("(%s:%c:%d:%d): Received "
5173 "SDTR period %x, offset %x\n\t"
5174 "Filtered to period %x, offset %x\n",
5175 ahd_name(ahd), devinfo->channel,
5176 devinfo->target, devinfo->lun,
5177 ahd->msgin_buf[3], saved_offset,
5178 period, offset);
5179 }
5180 ahd_set_syncrate(ahd, devinfo, period,
5181 offset, ppr_options,
5182 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
5183 /*paused*/TRUE);
5184
5185 /*
5186 * See if we initiated Sync Negotiation
5187 * and didn't have to fall down to async
5188 * transfers.
5189 */
5190 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) {
5191 /* We started it */
5192 if (saved_offset != offset) {
5193 /* Went too low - force async */
5194 reject = TRUE;
5195 }
5196 } else {
5197 /*
5198 * Send our own SDTR in reply
5199 */
5200 if (bootverbose
5201 && devinfo->role == ROLE_INITIATOR) {
5202 printf("(%s:%c:%d:%d): Target "
5203 "Initiated SDTR\n",
5204 ahd_name(ahd), devinfo->channel,
5205 devinfo->target, devinfo->lun);
5206 }
5207 ahd->msgout_index = 0;
5208 ahd->msgout_len = 0;
5209 ahd_construct_sdtr(ahd, devinfo,
5210 period, offset);
5211 ahd->msgout_index = 0;
5212 response = TRUE;
5213 }
5214 done = MSGLOOP_MSGCOMPLETE;
5215 break;
5216 }
5217 case MSG_EXT_WDTR:
5218 {
5219 u_int bus_width;
5220 u_int saved_width;
5221 u_int sending_reply;
5222
5223 sending_reply = FALSE;
5224 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
5225 reject = TRUE;
5226 break;
5227 }
5228
5229 /*
5230 * Wait until we have our arg before validating
5231 * and acting on this message.
5232 *
5233 * Add one to MSG_EXT_WDTR_LEN to account for
5234 * the extended message preamble.
5235 */
5236 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1))
5237 break;
5238
5239 bus_width = ahd->msgin_buf[3];
5240 saved_width = bus_width;
5241 ahd_validate_width(ahd, tinfo, &bus_width,
5242 devinfo->role);
5243 if (bootverbose) {
5244 printf("(%s:%c:%d:%d): Received WDTR "
5245 "%x filtered to %x\n",
5246 ahd_name(ahd), devinfo->channel,
5247 devinfo->target, devinfo->lun,
5248 saved_width, bus_width);
5249 }
5250
5251 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) {
5252 /*
5253 * Don't send a WDTR back to the
5254 * target, since we asked first.
5255 * If the width went higher than our
5256 * request, reject it.
5257 */
5258 if (saved_width > bus_width) {
5259 reject = TRUE;
5260 printf("(%s:%c:%d:%d): requested %dBit "
5261 "transfers. Rejecting...\n",
5262 ahd_name(ahd), devinfo->channel,
5263 devinfo->target, devinfo->lun,
5264 8 * (0x01 << bus_width));
5265 bus_width = 0;
5266 }
5267 } else {
5268 /*
5269 * Send our own WDTR in reply
5270 */
5271 if (bootverbose
5272 && devinfo->role == ROLE_INITIATOR) {
5273 printf("(%s:%c:%d:%d): Target "
5274 "Initiated WDTR\n",
5275 ahd_name(ahd), devinfo->channel,
5276 devinfo->target, devinfo->lun);
5277 }
5278 ahd->msgout_index = 0;
5279 ahd->msgout_len = 0;
5280 ahd_construct_wdtr(ahd, devinfo, bus_width);
5281 ahd->msgout_index = 0;
5282 response = TRUE;
5283 sending_reply = TRUE;
5284 }
5285 /*
5286 * After a wide message, we are async, but
5287 * some devices don't seem to honor this portion
5288 * of the spec. Force a renegotiation of the
5289 * sync component of our transfer agreement even
5290 * if our goal is async. By updating our width
5291 * after forcing the negotiation, we avoid
5292 * renegotiating for width.
5293 */
5294 ahd_update_neg_request(ahd, devinfo, tstate,
5295 tinfo, AHD_NEG_ALWAYS);
5296 ahd_set_width(ahd, devinfo, bus_width,
5297 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
5298 /*paused*/TRUE);
5299 if (sending_reply == FALSE && reject == FALSE) {
5300
5301 /*
5302 * We will always have an SDTR to send.
5303 */
5304 ahd->msgout_index = 0;
5305 ahd->msgout_len = 0;
5306 ahd_build_transfer_msg(ahd, devinfo);
5307 ahd->msgout_index = 0;
5308 response = TRUE;
5309 }
5310 done = MSGLOOP_MSGCOMPLETE;
5311 break;
5312 }
5313 case MSG_EXT_PPR:
5314 {
5315 u_int period;
5316 u_int offset;
5317 u_int bus_width;
5318 u_int ppr_options;
5319 u_int saved_width;
5320 u_int saved_offset;
5321 u_int saved_ppr_options;
5322
5323 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) {
5324 reject = TRUE;
5325 break;
5326 }
5327
5328 /*
5329 * Wait until we have all args before validating
5330 * and acting on this message.
5331 *
5332 * Add one to MSG_EXT_PPR_LEN to account for
5333 * the extended message preamble.
5334 */
5335 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1))
5336 break;
5337
5338 period = ahd->msgin_buf[3];
5339 offset = ahd->msgin_buf[5];
5340 bus_width = ahd->msgin_buf[6];
5341 saved_width = bus_width;
5342 ppr_options = ahd->msgin_buf[7];
5343 /*
5344 * According to the spec, a DT only
5345 * period factor with no DT option
5346 * set implies async.
5347 */
5348 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
5349 && period <= 9)
5350 offset = 0;
5351 saved_ppr_options = ppr_options;
5352 saved_offset = offset;
5353
5354 /*
5355 * Transfer options are only available if we
5356 * are negotiating wide.
5357 */
5358 if (bus_width == 0)
5359 ppr_options &= MSG_EXT_PPR_QAS_REQ;
5360
5361 ahd_validate_width(ahd, tinfo, &bus_width,
5362 devinfo->role);
5363 ahd_devlimited_syncrate(ahd, tinfo, &period,
5364 &ppr_options, devinfo->role);
5365 ahd_validate_offset(ahd, tinfo, period, &offset,
5366 bus_width, devinfo->role);
5367
5368 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) {
5369 /*
5370 * If we are unable to do any of the
5371 * requested options (we went too low),
5372 * then we'll have to reject the message.
5373 */
5374 if (saved_width > bus_width
5375 || saved_offset != offset
5376 || saved_ppr_options != ppr_options) {
5377 reject = TRUE;
5378 period = 0;
5379 offset = 0;
5380 bus_width = 0;
5381 ppr_options = 0;
5382 }
5383 } else {
5384 if (devinfo->role != ROLE_TARGET)
5385 printf("(%s:%c:%d:%d): Target "
5386 "Initiated PPR\n",
5387 ahd_name(ahd), devinfo->channel,
5388 devinfo->target, devinfo->lun);
5389 else
5390 printf("(%s:%c:%d:%d): Initiator "
5391 "Initiated PPR\n",
5392 ahd_name(ahd), devinfo->channel,
5393 devinfo->target, devinfo->lun);
5394 ahd->msgout_index = 0;
5395 ahd->msgout_len = 0;
5396 ahd_construct_ppr(ahd, devinfo, period, offset,
5397 bus_width, ppr_options);
5398 ahd->msgout_index = 0;
5399 response = TRUE;
5400 }
5401 if (bootverbose) {
5402 printf("(%s:%c:%d:%d): Received PPR width %x, "
5403 "period %x, offset %x,options %x\n"
5404 "\tFiltered to width %x, period %x, "
5405 "offset %x, options %x\n",
5406 ahd_name(ahd), devinfo->channel,
5407 devinfo->target, devinfo->lun,
5408 saved_width, ahd->msgin_buf[3],
5409 saved_offset, saved_ppr_options,
5410 bus_width, period, offset, ppr_options);
5411 }
5412 ahd_set_width(ahd, devinfo, bus_width,
5413 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
5414 /*paused*/TRUE);
5415 ahd_set_syncrate(ahd, devinfo, period,
5416 offset, ppr_options,
5417 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
5418 /*paused*/TRUE);
5419
5420 done = MSGLOOP_MSGCOMPLETE;
5421 break;
5422 }
5423 default:
5424 /* Unknown extended message. Reject it. */
5425 reject = TRUE;
5426 break;
5427 }
5428 break;
5429 }
5430 #ifdef AHD_TARGET_MODE
5431 case MSG_BUS_DEV_RESET:
5432 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD,
5433 CAM_BDR_SENT,
5434 "Bus Device Reset Received",
5435 /*verbose_level*/0);
5436 ahd_restart(ahd);
5437 done = MSGLOOP_TERMINATED;
5438 break;
5439 case MSG_ABORT_TAG:
5440 case MSG_ABORT:
5441 case MSG_CLEAR_QUEUE:
5442 {
5443 int tag;
5444
5445 /* Target mode messages */
5446 if (devinfo->role != ROLE_TARGET) {
5447 reject = TRUE;
5448 break;
5449 }
5450 tag = SCB_LIST_NULL;
5451 if (ahd->msgin_buf[0] == MSG_ABORT_TAG)
5452 tag = ahd_inb(ahd, INITIATOR_TAG);
5453 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
5454 devinfo->lun, tag, ROLE_TARGET,
5455 CAM_REQ_ABORTED);
5456
5457 tstate = ahd->enabled_targets[devinfo->our_scsiid];
5458 if (tstate != NULL) {
5459 struct ahd_tmode_lstate* lstate;
5460
5461 lstate = tstate->enabled_luns[devinfo->lun];
5462 if (lstate != NULL) {
5463 ahd_queue_lstate_event(ahd, lstate,
5464 devinfo->our_scsiid,
5465 ahd->msgin_buf[0],
5466 /*arg*/tag);
5467 ahd_send_lstate_events(ahd, lstate);
5468 }
5469 }
5470 ahd_restart(ahd);
5471 done = MSGLOOP_TERMINATED;
5472 break;
5473 }
5474 #endif
5475 case MSG_QAS_REQUEST:
5476 #ifdef AHD_DEBUG
5477 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
5478 printf("%s: QAS request. SCSISIGI == 0x%x\n",
5479 ahd_name(ahd), ahd_inb(ahd, SCSISIGI));
5480 #endif
5481 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE;
5482 /* FALLTHROUGH */
5483 case MSG_TERM_IO_PROC:
5484 default:
5485 reject = TRUE;
5486 break;
5487 }
5488
5489 if (reject) {
5490 /*
5491 * Setup to reject the message.
5492 */
5493 ahd->msgout_index = 0;
5494 ahd->msgout_len = 1;
5495 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT;
5496 done = MSGLOOP_MSGCOMPLETE;
5497 response = TRUE;
5498 }
5499
5500 if (done != MSGLOOP_IN_PROG && !response)
5501 /* Clear the outgoing message buffer */
5502 ahd->msgout_len = 0;
5503
5504 return (done);
5505 }
5506
5507 /*
5508 * Process a message reject message.
5509 */
5510 static int
5511 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
5512 {
5513 /*
5514 * What we care about here is if we had an
5515 * outstanding SDTR or WDTR message for this
5516 * target. If we did, this is a signal that
5517 * the target is refusing negotiation.
5518 */
5519 struct scb *scb;
5520 struct ahd_initiator_tinfo *tinfo;
5521 struct ahd_tmode_tstate *tstate;
5522 u_int scb_index;
5523 u_int last_msg;
5524 int response = 0;
5525
5526 scb_index = ahd_get_scbptr(ahd);
5527 scb = ahd_lookup_scb(ahd, scb_index);
5528 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel,
5529 devinfo->our_scsiid,
5530 devinfo->target, &tstate);
5531 /* Might be necessary */
5532 last_msg = ahd_inb(ahd, LAST_MSG);
5533
5534 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) {
5535 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE)
5536 && tinfo->goal.period <= AHD_SYNCRATE_PACED) {
5537 /*
5538 * Target may not like our SPI-4 PPR Options.
5539 * Attempt to negotiate 80MHz which will turn
5540 * off these options.
5541 */
5542 if (bootverbose) {
5543 printf("(%s:%c:%d:%d): PPR Rejected. "
5544 "Trying simple U160 PPR\n",
5545 ahd_name(ahd), devinfo->channel,
5546 devinfo->target, devinfo->lun);
5547 }
5548 tinfo->goal.period = AHD_SYNCRATE_DT;
5549 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ
5550 | MSG_EXT_PPR_QAS_REQ
5551 | MSG_EXT_PPR_DT_REQ;
5552 } else {
5553 /*
5554 * Target does not support the PPR message.
5555 * Attempt to negotiate SPI-2 style.
5556 */
5557 if (bootverbose) {
5558 printf("(%s:%c:%d:%d): PPR Rejected. "
5559 "Trying WDTR/SDTR\n",
5560 ahd_name(ahd), devinfo->channel,
5561 devinfo->target, devinfo->lun);
5562 }
5563 tinfo->goal.ppr_options = 0;
5564 tinfo->curr.transport_version = 2;
5565 tinfo->goal.transport_version = 2;
5566 }
5567 ahd->msgout_index = 0;
5568 ahd->msgout_len = 0;
5569 ahd_build_transfer_msg(ahd, devinfo);
5570 ahd->msgout_index = 0;
5571 response = 1;
5572 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) {
5573
5574 /* note 8bit xfers */
5575 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using "
5576 "8bit transfers\n", ahd_name(ahd),
5577 devinfo->channel, devinfo->target, devinfo->lun);
5578 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
5579 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
5580 /*paused*/TRUE);
5581 /*
5582 * No need to clear the sync rate. If the target
5583 * did not accept the command, our syncrate is
5584 * unaffected. If the target started the negotiation,
5585 * but rejected our response, we already cleared the
5586 * sync rate before sending our WDTR.
5587 */
5588 if (tinfo->goal.offset != tinfo->curr.offset) {
5589
5590 /* Start the sync negotiation */
5591 ahd->msgout_index = 0;
5592 ahd->msgout_len = 0;
5593 ahd_build_transfer_msg(ahd, devinfo);
5594 ahd->msgout_index = 0;
5595 response = 1;
5596 }
5597 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) {
5598 /* note asynch xfers and clear flag */
5599 ahd_set_syncrate(ahd, devinfo, /*period*/0,
5600 /*offset*/0, /*ppr_options*/0,
5601 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
5602 /*paused*/TRUE);
5603 printf("(%s:%c:%d:%d): refuses synchronous negotiation. "
5604 "Using asynchronous transfers\n",
5605 ahd_name(ahd), devinfo->channel,
5606 devinfo->target, devinfo->lun);
5607 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) {
5608 int tag_type;
5609 int mask;
5610
5611 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK);
5612
5613 if (tag_type == MSG_SIMPLE_TASK) {
5614 printf("(%s:%c:%d:%d): refuses tagged commands. "
5615 "Performing non-tagged I/O\n", ahd_name(ahd),
5616 devinfo->channel, devinfo->target, devinfo->lun);
5617 ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_NONE);
5618 mask = ~0x23;
5619 } else {
5620 printf("(%s:%c:%d:%d): refuses %s tagged commands. "
5621 "Performing simple queue tagged I/O only\n",
5622 ahd_name(ahd), devinfo->channel, devinfo->target,
5623 devinfo->lun, tag_type == MSG_ORDERED_TASK
5624 ? "ordered" : "head of queue");
5625 ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_BASIC);
5626 mask = ~0x03;
5627 }
5628
5629 /*
5630 * Resend the identify for this CCB as the target
5631 * may believe that the selection is invalid otherwise.
5632 */
5633 ahd_outb(ahd, SCB_CONTROL,
5634 ahd_inb_scbram(ahd, SCB_CONTROL) & mask);
5635 scb->hscb->control &= mask;
5636 ahd_set_transaction_tag(scb, /*enabled*/FALSE,
5637 /*type*/MSG_SIMPLE_TASK);
5638 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG);
5639 ahd_assert_atn(ahd);
5640 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun),
5641 SCB_GET_TAG(scb));
5642
5643 /*
5644 * Requeue all tagged commands for this target
5645 * currently in our posession so they can be
5646 * converted to untagged commands.
5647 */
5648 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
5649 SCB_GET_CHANNEL(ahd, scb),
5650 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
5651 ROLE_INITIATOR, CAM_REQUEUE_REQ,
5652 SEARCH_COMPLETE);
5653 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) {
5654 /*
5655 * Most likely the device believes that we had
5656 * previously negotiated packetized.
5657 */
5658 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
5659 | MSG_FLAG_IU_REQ_CHANGED;
5660
5661 ahd_force_renegotiation(ahd, devinfo);
5662 ahd->msgout_index = 0;
5663 ahd->msgout_len = 0;
5664 ahd_build_transfer_msg(ahd, devinfo);
5665 ahd->msgout_index = 0;
5666 response = 1;
5667 } else {
5668 /*
5669 * Otherwise, we ignore it.
5670 */
5671 printf("%s:%c:%d: Message reject for %x -- ignored\n",
5672 ahd_name(ahd), devinfo->channel, devinfo->target,
5673 last_msg);
5674 }
5675 return (response);
5676 }
5677
5678 /*
5679 * Process an ingnore wide residue message.
5680 */
5681 static void
5682 ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
5683 {
5684 u_int scb_index;
5685 struct scb *scb;
5686
5687 scb_index = ahd_get_scbptr(ahd);
5688 scb = ahd_lookup_scb(ahd, scb_index);
5689 /*
5690 * XXX Actually check data direction in the sequencer?
5691 * Perhaps add datadir to some spare bits in the hscb?
5692 */
5693 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0
5694 || ahd_get_transfer_dir(scb) != CAM_DIR_IN) {
5695 /*
5696 * Ignore the message if we haven't
5697 * seen an appropriate data phase yet.
5698 */
5699 } else {
5700 /*
5701 * If the residual occurred on the last
5702 * transfer and the transfer request was
5703 * expected to end on an odd count, do
5704 * nothing. Otherwise, subtract a byte
5705 * and update the residual count accordingly.
5706 */
5707 uint32_t sgptr;
5708
5709 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR);
5710 if ((sgptr & SG_LIST_NULL) != 0
5711 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
5712 & SCB_XFERLEN_ODD) != 0) {
5713 /*
5714 * If the residual occurred on the last
5715 * transfer and the transfer request was
5716 * expected to end on an odd count, do
5717 * nothing.
5718 */
5719 } else {
5720 uint32_t data_cnt;
5721 uint64_t data_addr;
5722 uint32_t sglen;
5723
5724 /* Pull in the rest of the sgptr */
5725 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
5726 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT);
5727 if ((sgptr & SG_LIST_NULL) != 0) {
5728 /*
5729 * The residual data count is not updated
5730 * for the command run to completion case.
5731 * Explicitly zero the count.
5732 */
5733 data_cnt &= ~AHD_SG_LEN_MASK;
5734 }
5735 data_addr = ahd_inq(ahd, SHADDR);
5736 data_cnt += 1;
5737 data_addr -= 1;
5738 sgptr &= SG_PTR_MASK;
5739 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
5740 struct ahd_dma64_seg *sg;
5741
5742 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5743
5744 /*
5745 * The residual sg ptr points to the next S/G
5746 * to load so we must go back one.
5747 */
5748 sg--;
5749 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
5750 if (sg != scb->sg_list
5751 && sglen < (data_cnt & AHD_SG_LEN_MASK)) {
5752
5753 sg--;
5754 sglen = ahd_le32toh(sg->len);
5755 /*
5756 * Preserve High Address and SG_LIST
5757 * bits while setting the count to 1.
5758 */
5759 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
5760 data_addr = ahd_le64toh(sg->addr)
5761 + (sglen & AHD_SG_LEN_MASK)
5762 - 1;
5763
5764 /*
5765 * Increment sg so it points to the
5766 * "next" sg.
5767 */
5768 sg++;
5769 sgptr = ahd_sg_virt_to_bus(ahd, scb,
5770 sg);
5771 }
5772 } else {
5773 struct ahd_dma_seg *sg;
5774
5775 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5776
5777 /*
5778 * The residual sg ptr points to the next S/G
5779 * to load so we must go back one.
5780 */
5781 sg--;
5782 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
5783 if (sg != scb->sg_list
5784 && sglen < (data_cnt & AHD_SG_LEN_MASK)) {
5785
5786 sg--;
5787 sglen = ahd_le32toh(sg->len);
5788 /*
5789 * Preserve High Address and SG_LIST
5790 * bits while setting the count to 1.
5791 */
5792 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
5793 data_addr = ahd_le32toh(sg->addr)
5794 + (sglen & AHD_SG_LEN_MASK)
5795 - 1;
5796
5797 /*
5798 * Increment sg so it points to the
5799 * "next" sg.
5800 */
5801 sg++;
5802 sgptr = ahd_sg_virt_to_bus(ahd, scb,
5803 sg);
5804 }
5805 }
5806 /*
5807 * Toggle the "oddness" of the transfer length
5808 * to handle this mid-transfer ignore wide
5809 * residue. This ensures that the oddness is
5810 * correct for subsequent data transfers.
5811 */
5812 ahd_outb(ahd, SCB_TASK_ATTRIBUTE,
5813 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
5814 ^ SCB_XFERLEN_ODD);
5815
5816 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
5817 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt);
5818 /*
5819 * The FIFO's pointers will be updated if/when the
5820 * sequencer re-enters a data phase.
5821 */
5822 }
5823 }
5824 }
5825
5826
5827 /*
5828 * Reinitialize the data pointers for the active transfer
5829 * based on its current residual.
5830 */
5831 static void
5832 ahd_reinitialize_dataptrs(struct ahd_softc *ahd)
5833 {
5834 struct scb *scb;
5835 ahd_mode_state saved_modes;
5836 u_int scb_index;
5837 u_int wait;
5838 uint32_t sgptr;
5839 uint32_t resid;
5840 uint64_t dataptr;
5841
5842 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK,
5843 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK);
5844
5845 scb_index = ahd_get_scbptr(ahd);
5846 scb = ahd_lookup_scb(ahd, scb_index);
5847
5848 /*
5849 * Release and reacquire the FIFO so we
5850 * have a clean slate.
5851 */
5852 ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
5853 wait = 1000;
5854 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE))
5855 ahd_delay(100);
5856 if (wait == 0) {
5857 ahd_print_path(ahd, scb);
5858 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n");
5859 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
5860 }
5861 saved_modes = ahd_save_modes(ahd);
5862 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5863 ahd_outb(ahd, DFFSTAT,
5864 ahd_inb(ahd, DFFSTAT)
5865 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0));
5866
5867 /*
5868 * Determine initial values for data_addr and data_cnt
5869 * for resuming the data phase.
5870 */
5871 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
5872 sgptr &= SG_PTR_MASK;
5873
5874 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16)
5875 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8)
5876 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT);
5877
5878 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
5879 struct ahd_dma64_seg *sg;
5880
5881 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5882
5883 /* The residual sg_ptr always points to the next sg */
5884 sg--;
5885
5886 dataptr = ahd_le64toh(sg->addr)
5887 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
5888 - resid;
5889 ahd_outl(ahd, HADDR + 4, dataptr >> 32);
5890 } else {
5891 struct ahd_dma_seg *sg;
5892
5893 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5894
5895 /* The residual sg_ptr always points to the next sg */
5896 sg--;
5897
5898 dataptr = ahd_le32toh(sg->addr)
5899 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
5900 - resid;
5901 ahd_outb(ahd, HADDR + 4,
5902 (ahd_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24);
5903 }
5904 ahd_outl(ahd, HADDR, dataptr);
5905 ahd_outb(ahd, HCNT + 2, resid >> 16);
5906 ahd_outb(ahd, HCNT + 1, resid >> 8);
5907 ahd_outb(ahd, HCNT, resid);
5908 }
5909
5910 /*
5911 * Handle the effects of issuing a bus device reset message.
5912 */
5913 static void
5914 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
5915 u_int lun, cam_status status, char *message,
5916 int verbose_level)
5917 {
5918 #ifdef AHD_TARGET_MODE
5919 struct ahd_tmode_tstate* tstate;
5920 #endif
5921 int found;
5922
5923 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
5924 lun, SCB_LIST_NULL, devinfo->role,
5925 status);
5926
5927 #ifdef AHD_TARGET_MODE
5928 /*
5929 * Send an immediate notify ccb to all target mord peripheral
5930 * drivers affected by this action.
5931 */
5932 tstate = ahd->enabled_targets[devinfo->our_scsiid];
5933 if (tstate != NULL) {
5934 u_int cur_lun;
5935 u_int max_lun;
5936
5937 if (lun != CAM_LUN_WILDCARD) {
5938 cur_lun = 0;
5939 max_lun = AHD_NUM_LUNS - 1;
5940 } else {
5941 cur_lun = lun;
5942 max_lun = lun;
5943 }
5944 for (;cur_lun <= max_lun; cur_lun++) {
5945 struct ahd_tmode_lstate* lstate;
5946
5947 lstate = tstate->enabled_luns[cur_lun];
5948 if (lstate == NULL)
5949 continue;
5950
5951 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid,
5952 MSG_BUS_DEV_RESET, /*arg*/0);
5953 ahd_send_lstate_events(ahd, lstate);
5954 }
5955 }
5956 #endif
5957
5958 /*
5959 * Go back to async/narrow transfers and renegotiate.
5960 */
5961 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
5962 AHD_TRANS_CUR, /*paused*/TRUE);
5963 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0,
5964 /*ppr_options*/0, AHD_TRANS_CUR,
5965 /*paused*/TRUE);
5966
5967 if (status != CAM_SEL_TIMEOUT)
5968 ahd_send_async(ahd, devinfo->channel, devinfo->target,
5969 CAM_LUN_WILDCARD, AC_SENT_BDR);
5970
5971 if (message != NULL && bootverbose)
5972 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd),
5973 message, devinfo->channel, devinfo->target, found);
5974 }
5975
5976 #ifdef AHD_TARGET_MODE
5977 static void
5978 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
5979 struct scb *scb)
5980 {
5981
5982 /*
5983 * To facilitate adding multiple messages together,
5984 * each routine should increment the index and len
5985 * variables instead of setting them explicitly.
5986 */
5987 ahd->msgout_index = 0;
5988 ahd->msgout_len = 0;
5989
5990 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0)
5991 ahd_build_transfer_msg(ahd, devinfo);
5992 else
5993 panic("ahd_intr: AWAITING target message with no message");
5994
5995 ahd->msgout_index = 0;
5996 ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
5997 }
5998 #endif
5999 /**************************** Initialization **********************************/
6000 static u_int
6001 ahd_sglist_size(struct ahd_softc *ahd)
6002 {
6003 bus_size_t list_size;
6004
6005 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG;
6006 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
6007 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG;
6008 return (list_size);
6009 }
6010
6011 /*
6012 * Calculate the optimum S/G List allocation size. S/G elements used
6013 * for a given transaction must be physically contiguous. Assume the
6014 * OS will allocate full pages to us, so it doesn't make sense to request
6015 * less than a page.
6016 */
6017 static u_int
6018 ahd_sglist_allocsize(struct ahd_softc *ahd)
6019 {
6020 bus_size_t sg_list_increment;
6021 bus_size_t sg_list_size;
6022 bus_size_t max_list_size;
6023 bus_size_t best_list_size;
6024
6025 /* Start out with the minimum required for AHD_NSEG. */
6026 sg_list_increment = ahd_sglist_size(ahd);
6027 sg_list_size = sg_list_increment;
6028
6029 /* Get us as close as possible to a page in size. */
6030 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE)
6031 sg_list_size += sg_list_increment;
6032
6033 /*
6034 * Try to reduce the amount of wastage by allocating
6035 * multiple pages.
6036 */
6037 best_list_size = sg_list_size;
6038 max_list_size = roundup(sg_list_increment, PAGE_SIZE);
6039 if (max_list_size < 4 * PAGE_SIZE)
6040 max_list_size = 4 * PAGE_SIZE;
6041 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment))
6042 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment);
6043 while ((sg_list_size + sg_list_increment) <= max_list_size
6044 && (sg_list_size % PAGE_SIZE) != 0) {
6045 bus_size_t new_mod;
6046 bus_size_t best_mod;
6047
6048 sg_list_size += sg_list_increment;
6049 new_mod = sg_list_size % PAGE_SIZE;
6050 best_mod = best_list_size % PAGE_SIZE;
6051 if (new_mod > best_mod || new_mod == 0) {
6052 best_list_size = sg_list_size;
6053 }
6054 }
6055 return (best_list_size);
6056 }
6057
6058 /*
6059 * Allocate a controller structure for a new device
6060 * and perform initial initializion.
6061 */
6062 struct ahd_softc *
6063 ahd_alloc(void *platform_arg, char *name)
6064 {
6065 struct ahd_softc *ahd;
6066
6067 #ifndef __FreeBSD__
6068 ahd = malloc(sizeof(*ahd), M_DEVBUF, M_NOWAIT);
6069 if (!ahd) {
6070 printf("aic7xxx: cannot malloc softc!\n");
6071 free(name, M_DEVBUF);
6072 return NULL;
6073 }
6074 #else
6075 ahd = device_get_softc((device_t)platform_arg);
6076 #endif
6077 memset(ahd, 0, sizeof(*ahd));
6078 ahd->seep_config = malloc(sizeof(*ahd->seep_config),
6079 M_DEVBUF, M_NOWAIT);
6080 if (ahd->seep_config == NULL) {
6081 #ifndef __FreeBSD__
6082 free(ahd, M_DEVBUF);
6083 #endif
6084 free(name, M_DEVBUF);
6085 return (NULL);
6086 }
6087 LIST_INIT(&ahd->pending_scbs);
6088 /* We don't know our unit number until the OSM sets it */
6089 ahd->name = name;
6090 ahd->unit = -1;
6091 ahd->description = NULL;
6092 ahd->bus_description = NULL;
6093 ahd->channel = 'A';
6094 ahd->chip = AHD_NONE;
6095 ahd->features = AHD_FENONE;
6096 ahd->bugs = AHD_BUGNONE;
6097 ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A
6098 | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A;
6099 ahd_timer_init(&ahd->reset_timer);
6100 ahd_timer_init(&ahd->stat_timer);
6101 ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT;
6102 ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT;
6103 ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT;
6104 ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT;
6105 ahd->int_coalescing_stop_threshold =
6106 AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT;
6107
6108 if (ahd_platform_alloc(ahd, platform_arg) != 0) {
6109 ahd_free(ahd);
6110 ahd = NULL;
6111 }
6112 #ifdef AHD_DEBUG
6113 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) {
6114 printf("%s: scb size = 0x%x, hscb size = 0x%x\n",
6115 ahd_name(ahd), (u_int)sizeof(struct scb),
6116 (u_int)sizeof(struct hardware_scb));
6117 }
6118 #endif
6119 return (ahd);
6120 }
6121
6122 int
6123 ahd_softc_init(struct ahd_softc *ahd)
6124 {
6125
6126 ahd->unpause = 0;
6127 ahd->pause = PAUSE;
6128 return (0);
6129 }
6130
6131 void
6132 ahd_set_unit(struct ahd_softc *ahd, int unit)
6133 {
6134 ahd->unit = unit;
6135 }
6136
6137 void
6138 ahd_set_name(struct ahd_softc *ahd, char *name)
6139 {
6140 if (ahd->name != NULL)
6141 free(ahd->name, M_DEVBUF);
6142 ahd->name = name;
6143 }
6144
6145 void
6146 ahd_free(struct ahd_softc *ahd)
6147 {
6148 int i;
6149
6150 switch (ahd->init_level) {
6151 default:
6152 case 5:
6153 ahd_shutdown(ahd);
6154 /* FALLTHROUGH */
6155 case 4:
6156 ahd_dmamap_unload(ahd, ahd->shared_data_dmat,
6157 ahd->shared_data_map.dmamap);
6158 /* FALLTHROUGH */
6159 case 3:
6160 ahd_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo,
6161 ahd->shared_data_map.dmamap);
6162 ahd_dmamap_destroy(ahd, ahd->shared_data_dmat,
6163 ahd->shared_data_map.dmamap);
6164 /* FALLTHROUGH */
6165 case 2:
6166 ahd_dma_tag_destroy(ahd, ahd->shared_data_dmat);
6167 case 1:
6168 #ifndef __linux__
6169 ahd_dma_tag_destroy(ahd, ahd->buffer_dmat);
6170 #endif
6171 break;
6172 case 0:
6173 break;
6174 }
6175
6176 #ifndef __linux__
6177 ahd_dma_tag_destroy(ahd, ahd->parent_dmat);
6178 #endif
6179 ahd_platform_free(ahd);
6180 ahd_fini_scbdata(ahd);
6181 for (i = 0; i < AHD_NUM_TARGETS; i++) {
6182 struct ahd_tmode_tstate *tstate;
6183
6184 tstate = ahd->enabled_targets[i];
6185 if (tstate != NULL) {
6186 #ifdef AHD_TARGET_MODE
6187 int j;
6188
6189 for (j = 0; j < AHD_NUM_LUNS; j++) {
6190 struct ahd_tmode_lstate *lstate;
6191
6192 lstate = tstate->enabled_luns[j];
6193 if (lstate != NULL) {
6194 xpt_free_path(lstate->path);
6195 free(lstate, M_DEVBUF);
6196 }
6197 }
6198 #endif
6199 free(tstate, M_DEVBUF);
6200 }
6201 }
6202 #ifdef AHD_TARGET_MODE
6203 if (ahd->black_hole != NULL) {
6204 xpt_free_path(ahd->black_hole->path);
6205 free(ahd->black_hole, M_DEVBUF);
6206 }
6207 #endif
6208 if (ahd->name != NULL)
6209 free(ahd->name, M_DEVBUF);
6210 if (ahd->seep_config != NULL)
6211 free(ahd->seep_config, M_DEVBUF);
6212 if (ahd->saved_stack != NULL)
6213 free(ahd->saved_stack, M_DEVBUF);
6214 #ifndef __FreeBSD__
6215 free(ahd, M_DEVBUF);
6216 #endif
6217 return;
6218 }
6219
6220 static void
6221 ahd_shutdown(void *arg)
6222 {
6223 struct ahd_softc *ahd;
6224
6225 ahd = (struct ahd_softc *)arg;
6226
6227 /*
6228 * Stop periodic timer callbacks.
6229 */
6230 ahd_timer_stop(&ahd->reset_timer);
6231 ahd_timer_stop(&ahd->stat_timer);
6232
6233 /* This will reset most registers to 0, but not all */
6234 ahd_reset(ahd, /*reinit*/FALSE);
6235 }
6236
6237 /*
6238 * Reset the controller and record some information about it
6239 * that is only available just after a reset. If "reinit" is
6240 * non-zero, this reset occured after initial configuration
6241 * and the caller requests that the chip be fully reinitialized
6242 * to a runable state. Chip interrupts are *not* enabled after
6243 * a reinitialization. The caller must enable interrupts via
6244 * ahd_intr_enable().
6245 */
6246 int
6247 ahd_reset(struct ahd_softc *ahd, int reinit)
6248 {
6249 u_int sxfrctl1;
6250 int wait;
6251 uint32_t cmd;
6252
6253 /*
6254 * Preserve the value of the SXFRCTL1 register for all channels.
6255 * It contains settings that affect termination and we don't want
6256 * to disturb the integrity of the bus.
6257 */
6258 ahd_pause(ahd);
6259 ahd_update_modes(ahd);
6260 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6261 sxfrctl1 = ahd_inb(ahd, SXFRCTL1);
6262
6263 cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
6264 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
6265 uint32_t mod_cmd;
6266
6267 /*
6268 * A4 Razor #632
6269 * During the assertion of CHIPRST, the chip
6270 * does not disable its parity logic prior to
6271 * the start of the reset. This may cause a
6272 * parity error to be detected and thus a
6273 * spurious SERR or PERR assertion. Disble
6274 * PERR and SERR responses during the CHIPRST.
6275 */
6276 mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN);
6277 ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
6278 mod_cmd, /*bytes*/2);
6279 }
6280 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause);
6281
6282 /*
6283 * Ensure that the reset has finished. We delay 1000us
6284 * prior to reading the register to make sure the chip
6285 * has sufficiently completed its reset to handle register
6286 * accesses.
6287 */
6288 wait = 1000;
6289 do {
6290 ahd_delay(1000);
6291 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK));
6292
6293 if (wait == 0) {
6294 printf("%s: WARNING - Failed chip reset! "
6295 "Trying to initialize anyway.\n", ahd_name(ahd));
6296 }
6297 ahd_outb(ahd, HCNTRL, ahd->pause);
6298
6299 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
6300 /*
6301 * Clear any latched PCI error status and restore
6302 * previous SERR and PERR response enables.
6303 */
6304 ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
6305 0xFF, /*bytes*/1);
6306 ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
6307 cmd, /*bytes*/2);
6308 }
6309
6310 /*
6311 * Mode should be SCSI after a chip reset, but lets
6312 * set it just to be safe. We touch the MODE_PTR
6313 * register directly so as to bypass the lazy update
6314 * code in ahd_set_modes().
6315 */
6316 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6317 ahd_outb(ahd, MODE_PTR,
6318 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI));
6319
6320 /*
6321 * Restore SXFRCTL1.
6322 *
6323 * We must always initialize STPWEN to 1 before we
6324 * restore the saved values. STPWEN is initialized
6325 * to a tri-state condition which can only be cleared
6326 * by turning it on.
6327 */
6328 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN);
6329 ahd_outb(ahd, SXFRCTL1, sxfrctl1);
6330
6331 /* Determine chip configuration */
6332 ahd->features &= ~AHD_WIDE;
6333 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0)
6334 ahd->features |= AHD_WIDE;
6335
6336 /*
6337 * If a recovery action has forced a chip reset,
6338 * re-initialize the chip to our liking.
6339 */
6340 if (reinit != 0)
6341 ahd_chip_init(ahd);
6342
6343 return (0);
6344 }
6345
6346 /*
6347 * Determine the number of SCBs available on the controller
6348 */
6349 static int
6350 ahd_probe_scbs(struct ahd_softc *ahd) {
6351 int i;
6352
6353 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
6354 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
6355 for (i = 0; i < AHD_SCB_MAX; i++) {
6356 int j;
6357
6358 ahd_set_scbptr(ahd, i);
6359 ahd_outw(ahd, SCB_BASE, i);
6360 for (j = 2; j < 64; j++)
6361 ahd_outb(ahd, SCB_BASE+j, 0);
6362 /* Start out life as unallocated (needing an abort) */
6363 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE);
6364 if (ahd_inw_scbram(ahd, SCB_BASE) != i)
6365 break;
6366 ahd_set_scbptr(ahd, 0);
6367 if (ahd_inw_scbram(ahd, SCB_BASE) != 0)
6368 break;
6369 }
6370 return (i);
6371 }
6372
6373 static void
6374 ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
6375 {
6376 dma_addr_t *baddr;
6377
6378 baddr = (dma_addr_t *)arg;
6379 *baddr = segs->ds_addr;
6380 }
6381
6382 static void
6383 ahd_initialize_hscbs(struct ahd_softc *ahd)
6384 {
6385 int i;
6386
6387 for (i = 0; i < ahd->scb_data.maxhscbs; i++) {
6388 ahd_set_scbptr(ahd, i);
6389
6390 /* Clear the control byte. */
6391 ahd_outb(ahd, SCB_CONTROL, 0);
6392
6393 /* Set the next pointer */
6394 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL);
6395 }
6396 }
6397
6398 static int
6399 ahd_init_scbdata(struct ahd_softc *ahd)
6400 {
6401 struct scb_data *scb_data;
6402 int i;
6403
6404 scb_data = &ahd->scb_data;
6405 TAILQ_INIT(&scb_data->free_scbs);
6406 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++)
6407 LIST_INIT(&scb_data->free_scb_lists[i]);
6408 LIST_INIT(&scb_data->any_dev_free_scb_list);
6409 SLIST_INIT(&scb_data->hscb_maps);
6410 SLIST_INIT(&scb_data->sg_maps);
6411 SLIST_INIT(&scb_data->sense_maps);
6412
6413 /* Determine the number of hardware SCBs and initialize them */
6414 scb_data->maxhscbs = ahd_probe_scbs(ahd);
6415 if (scb_data->maxhscbs == 0) {
6416 printf("%s: No SCB space found\n", ahd_name(ahd));
6417 return (ENXIO);
6418 }
6419
6420 ahd_initialize_hscbs(ahd);
6421
6422 /*
6423 * Create our DMA tags. These tags define the kinds of device
6424 * accessible memory allocations and memory mappings we will
6425 * need to perform during normal operation.
6426 *
6427 * Unless we need to further restrict the allocation, we rely
6428 * on the restrictions of the parent dmat, hence the common
6429 * use of MAXADDR and MAXSIZE.
6430 */
6431
6432 /* DMA tag for our hardware scb structures */
6433 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
6434 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
6435 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
6436 /*highaddr*/BUS_SPACE_MAXADDR,
6437 /*filter*/NULL, /*filterarg*/NULL,
6438 PAGE_SIZE, /*nsegments*/1,
6439 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
6440 /*flags*/0, &scb_data->hscb_dmat) != 0) {
6441 goto error_exit;
6442 }
6443
6444 scb_data->init_level++;
6445
6446 /* DMA tag for our S/G structures. */
6447 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8,
6448 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
6449 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
6450 /*highaddr*/BUS_SPACE_MAXADDR,
6451 /*filter*/NULL, /*filterarg*/NULL,
6452 ahd_sglist_allocsize(ahd), /*nsegments*/1,
6453 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
6454 /*flags*/0, &scb_data->sg_dmat) != 0) {
6455 goto error_exit;
6456 }
6457 #ifdef AHD_DEBUG
6458 if ((ahd_debug & AHD_SHOW_MEMORY) != 0)
6459 printf("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd),
6460 ahd_sglist_allocsize(ahd));
6461 #endif
6462
6463 scb_data->init_level++;
6464
6465 /* DMA tag for our sense buffers. We allocate in page sized chunks */
6466 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
6467 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
6468 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
6469 /*highaddr*/BUS_SPACE_MAXADDR,
6470 /*filter*/NULL, /*filterarg*/NULL,
6471 PAGE_SIZE, /*nsegments*/1,
6472 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
6473 /*flags*/0, &scb_data->sense_dmat) != 0) {
6474 goto error_exit;
6475 }
6476
6477 scb_data->init_level++;
6478
6479 /* Perform initial CCB allocation */
6480 ahd_alloc_scbs(ahd);
6481
6482 if (scb_data->numscbs == 0) {
6483 printf("%s: ahd_init_scbdata - "
6484 "Unable to allocate initial scbs\n",
6485 ahd_name(ahd));
6486 goto error_exit;
6487 }
6488
6489 /*
6490 * Note that we were successfull
6491 */
6492 return (0);
6493
6494 error_exit:
6495
6496 return (ENOMEM);
6497 }
6498
6499 static struct scb *
6500 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag)
6501 {
6502 struct scb *scb;
6503
6504 /*
6505 * Look on the pending list.
6506 */
6507 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
6508 if (SCB_GET_TAG(scb) == tag)
6509 return (scb);
6510 }
6511
6512 /*
6513 * Then on all of the collision free lists.
6514 */
6515 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
6516 struct scb *list_scb;
6517
6518 list_scb = scb;
6519 do {
6520 if (SCB_GET_TAG(list_scb) == tag)
6521 return (list_scb);
6522 list_scb = LIST_NEXT(list_scb, collision_links);
6523 } while (list_scb);
6524 }
6525
6526 /*
6527 * And finally on the generic free list.
6528 */
6529 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
6530 if (SCB_GET_TAG(scb) == tag)
6531 return (scb);
6532 }
6533
6534 return (NULL);
6535 }
6536
6537 static void
6538 ahd_fini_scbdata(struct ahd_softc *ahd)
6539 {
6540 struct scb_data *scb_data;
6541
6542 scb_data = &ahd->scb_data;
6543 if (scb_data == NULL)
6544 return;
6545
6546 switch (scb_data->init_level) {
6547 default:
6548 case 7:
6549 {
6550 struct map_node *sns_map;
6551
6552 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) {
6553 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links);
6554 ahd_dmamap_unload(ahd, scb_data->sense_dmat,
6555 sns_map->dmamap);
6556 ahd_dmamem_free(ahd, scb_data->sense_dmat,
6557 sns_map->vaddr, sns_map->dmamap);
6558 free(sns_map, M_DEVBUF);
6559 }
6560 ahd_dma_tag_destroy(ahd, scb_data->sense_dmat);
6561 /* FALLTHROUGH */
6562 }
6563 case 6:
6564 {
6565 struct map_node *sg_map;
6566
6567 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) {
6568 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
6569 ahd_dmamap_unload(ahd, scb_data->sg_dmat,
6570 sg_map->dmamap);
6571 ahd_dmamem_free(ahd, scb_data->sg_dmat,
6572 sg_map->vaddr, sg_map->dmamap);
6573 free(sg_map, M_DEVBUF);
6574 }
6575 ahd_dma_tag_destroy(ahd, scb_data->sg_dmat);
6576 /* FALLTHROUGH */
6577 }
6578 case 5:
6579 {
6580 struct map_node *hscb_map;
6581
6582 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) {
6583 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links);
6584 ahd_dmamap_unload(ahd, scb_data->hscb_dmat,
6585 hscb_map->dmamap);
6586 ahd_dmamem_free(ahd, scb_data->hscb_dmat,
6587 hscb_map->vaddr, hscb_map->dmamap);
6588 free(hscb_map, M_DEVBUF);
6589 }
6590 ahd_dma_tag_destroy(ahd, scb_data->hscb_dmat);
6591 /* FALLTHROUGH */
6592 }
6593 case 4:
6594 case 3:
6595 case 2:
6596 case 1:
6597 case 0:
6598 break;
6599 }
6600 }
6601
6602 /*
6603 * DSP filter Bypass must be enabled until the first selection
6604 * after a change in bus mode (Razor #491 and #493).
6605 */
6606 static void
6607 ahd_setup_iocell_workaround(struct ahd_softc *ahd)
6608 {
6609 ahd_mode_state saved_modes;
6610
6611 saved_modes = ahd_save_modes(ahd);
6612 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
6613 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL)
6614 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS);
6615 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI));
6616 #ifdef AHD_DEBUG
6617 if ((ahd_debug & AHD_SHOW_MISC) != 0)
6618 printf("%s: Setting up iocell workaround\n", ahd_name(ahd));
6619 #endif
6620 ahd_restore_modes(ahd, saved_modes);
6621 ahd->flags &= ~AHD_HAD_FIRST_SEL;
6622 }
6623
6624 static void
6625 ahd_iocell_first_selection(struct ahd_softc *ahd)
6626 {
6627 ahd_mode_state saved_modes;
6628 u_int sblkctl;
6629
6630 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0)
6631 return;
6632 saved_modes = ahd_save_modes(ahd);
6633 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6634 sblkctl = ahd_inb(ahd, SBLKCTL);
6635 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
6636 #ifdef AHD_DEBUG
6637 if ((ahd_debug & AHD_SHOW_MISC) != 0)
6638 printf("%s: iocell first selection\n", ahd_name(ahd));
6639 #endif
6640 if ((sblkctl & ENAB40) != 0) {
6641 ahd_outb(ahd, DSPDATACTL,
6642 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB);
6643 #ifdef AHD_DEBUG
6644 if ((ahd_debug & AHD_SHOW_MISC) != 0)
6645 printf("%s: BYPASS now disabled\n", ahd_name(ahd));
6646 #endif
6647 }
6648 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI));
6649 ahd_outb(ahd, CLRINT, CLRSCSIINT);
6650 ahd_restore_modes(ahd, saved_modes);
6651 ahd->flags |= AHD_HAD_FIRST_SEL;
6652 }
6653
6654 /*************************** SCB Management ***********************************/
6655 static void
6656 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx)
6657 {
6658 struct scb_list *free_list;
6659 struct scb_tailq *free_tailq;
6660 struct scb *first_scb;
6661
6662 scb->flags |= SCB_ON_COL_LIST;
6663 AHD_SET_SCB_COL_IDX(scb, col_idx);
6664 free_list = &ahd->scb_data.free_scb_lists[col_idx];
6665 free_tailq = &ahd->scb_data.free_scbs;
6666 first_scb = LIST_FIRST(free_list);
6667 if (first_scb != NULL) {
6668 LIST_INSERT_AFTER(first_scb, scb, collision_links);
6669 } else {
6670 LIST_INSERT_HEAD(free_list, scb, collision_links);
6671 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe);
6672 }
6673 }
6674
6675 static void
6676 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb)
6677 {
6678 struct scb_list *free_list;
6679 struct scb_tailq *free_tailq;
6680 struct scb *first_scb;
6681 u_int col_idx;
6682
6683 scb->flags &= ~SCB_ON_COL_LIST;
6684 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb);
6685 free_list = &ahd->scb_data.free_scb_lists[col_idx];
6686 free_tailq = &ahd->scb_data.free_scbs;
6687 first_scb = LIST_FIRST(free_list);
6688 if (first_scb == scb) {
6689 struct scb *next_scb;
6690
6691 /*
6692 * Maintain order in the collision free
6693 * lists for fairness if this device has
6694 * other colliding tags active.
6695 */
6696 next_scb = LIST_NEXT(scb, collision_links);
6697 if (next_scb != NULL) {
6698 TAILQ_INSERT_AFTER(free_tailq, scb,
6699 next_scb, links.tqe);
6700 }
6701 TAILQ_REMOVE(free_tailq, scb, links.tqe);
6702 }
6703 LIST_REMOVE(scb, collision_links);
6704 }
6705
6706 /*
6707 * Get a free scb. If there are none, see if we can allocate a new SCB.
6708 */
6709 struct scb *
6710 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx)
6711 {
6712 struct scb *scb;
6713 int tries;
6714
6715 tries = 0;
6716 look_again:
6717 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
6718 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) {
6719 ahd_rem_col_list(ahd, scb);
6720 goto found;
6721 }
6722 }
6723 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) {
6724
6725 if (tries++ != 0)
6726 return (NULL);
6727 ahd_alloc_scbs(ahd);
6728 goto look_again;
6729 }
6730 LIST_REMOVE(scb, links.le);
6731 if (col_idx != AHD_NEVER_COL_IDX
6732 && (scb->col_scb != NULL)
6733 && (scb->col_scb->flags & SCB_ACTIVE) == 0) {
6734 LIST_REMOVE(scb->col_scb, links.le);
6735 ahd_add_col_list(ahd, scb->col_scb, col_idx);
6736 }
6737 found:
6738 scb->flags |= SCB_ACTIVE;
6739 return (scb);
6740 }
6741
6742 /*
6743 * Return an SCB resource to the free list.
6744 */
6745 void
6746 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb)
6747 {
6748 /* Clean up for the next user */
6749 scb->flags = SCB_FLAG_NONE;
6750 scb->hscb->control = 0;
6751 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL;
6752
6753 if (scb->col_scb == NULL) {
6754
6755 /*
6756 * No collision possible. Just free normally.
6757 */
6758 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
6759 scb, links.le);
6760 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) {
6761
6762 /*
6763 * The SCB we might have collided with is on
6764 * a free collision list. Put both SCBs on
6765 * the generic list.
6766 */
6767 ahd_rem_col_list(ahd, scb->col_scb);
6768 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
6769 scb, links.le);
6770 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
6771 scb->col_scb, links.le);
6772 } else if ((scb->col_scb->flags
6773 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE
6774 && (scb->col_scb->hscb->control & TAG_ENB) != 0) {
6775
6776 /*
6777 * The SCB we might collide with on the next allocation
6778 * is still active in a non-packetized, tagged, context.
6779 * Put us on the SCB collision list.
6780 */
6781 ahd_add_col_list(ahd, scb,
6782 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb));
6783 } else {
6784 /*
6785 * The SCB we might collide with on the next allocation
6786 * is either active in a packetized context, or free.
6787 * Since we can't collide, put this SCB on the generic
6788 * free list.
6789 */
6790 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
6791 scb, links.le);
6792 }
6793
6794 ahd_platform_scb_free(ahd, scb);
6795 }
6796
6797 static void
6798 ahd_alloc_scbs(struct ahd_softc *ahd)
6799 {
6800 struct scb_data *scb_data;
6801 struct scb *next_scb;
6802 struct hardware_scb *hscb;
6803 struct map_node *hscb_map;
6804 struct map_node *sg_map;
6805 struct map_node *sense_map;
6806 uint8_t *segs;
6807 uint8_t *sense_data;
6808 dma_addr_t hscb_busaddr;
6809 dma_addr_t sg_busaddr;
6810 dma_addr_t sense_busaddr;
6811 int newcount;
6812 int i;
6813
6814 scb_data = &ahd->scb_data;
6815 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC)
6816 /* Can't allocate any more */
6817 return;
6818
6819 if (scb_data->scbs_left != 0) {
6820 int offset;
6821
6822 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left;
6823 hscb_map = SLIST_FIRST(&scb_data->hscb_maps);
6824 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset];
6825 hscb_busaddr = hscb_map->physaddr + (offset * sizeof(*hscb));
6826 } else {
6827 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_NOWAIT);
6828
6829 if (hscb_map == NULL)
6830 return;
6831
6832 /* Allocate the next batch of hardware SCBs */
6833 if (ahd_dmamem_alloc(ahd, scb_data->hscb_dmat,
6834 (void **)&hscb_map->vaddr,
6835 BUS_DMA_NOWAIT, &hscb_map->dmamap) != 0) {
6836 free(hscb_map, M_DEVBUF);
6837 return;
6838 }
6839
6840 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links);
6841
6842 ahd_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap,
6843 hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb,
6844 &hscb_map->physaddr, /*flags*/0);
6845
6846 hscb = (struct hardware_scb *)hscb_map->vaddr;
6847 hscb_busaddr = hscb_map->physaddr;
6848 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb);
6849 }
6850
6851 if (scb_data->sgs_left != 0) {
6852 int offset;
6853
6854 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd))
6855 - scb_data->sgs_left) * ahd_sglist_size(ahd);
6856 sg_map = SLIST_FIRST(&scb_data->sg_maps);
6857 segs = sg_map->vaddr + offset;
6858 sg_busaddr = sg_map->physaddr + offset;
6859 } else {
6860 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT);
6861
6862 if (sg_map == NULL)
6863 return;
6864
6865 /* Allocate the next batch of S/G lists */
6866 if (ahd_dmamem_alloc(ahd, scb_data->sg_dmat,
6867 (void **)&sg_map->vaddr,
6868 BUS_DMA_NOWAIT, &sg_map->dmamap) != 0) {
6869 free(sg_map, M_DEVBUF);
6870 return;
6871 }
6872
6873 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);
6874
6875 ahd_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap,
6876 sg_map->vaddr, ahd_sglist_allocsize(ahd),
6877 ahd_dmamap_cb, &sg_map->physaddr, /*flags*/0);
6878
6879 segs = sg_map->vaddr;
6880 sg_busaddr = sg_map->physaddr;
6881 scb_data->sgs_left =
6882 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd);
6883 #ifdef AHD_DEBUG
6884 if (ahd_debug & AHD_SHOW_MEMORY)
6885 printf("Mapped SG data\n");
6886 #endif
6887 }
6888
6889 if (scb_data->sense_left != 0) {
6890 int offset;
6891
6892 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left);
6893 sense_map = SLIST_FIRST(&scb_data->sense_maps);
6894 sense_data = sense_map->vaddr + offset;
6895 sense_busaddr = sense_map->physaddr + offset;
6896 } else {
6897 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_NOWAIT);
6898
6899 if (sense_map == NULL)
6900 return;
6901
6902 /* Allocate the next batch of sense buffers */
6903 if (ahd_dmamem_alloc(ahd, scb_data->sense_dmat,
6904 (void **)&sense_map->vaddr,
6905 BUS_DMA_NOWAIT, &sense_map->dmamap) != 0) {
6906 free(sense_map, M_DEVBUF);
6907 return;
6908 }
6909
6910 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links);
6911
6912 ahd_dmamap_load(ahd, scb_data->sense_dmat, sense_map->dmamap,
6913 sense_map->vaddr, PAGE_SIZE, ahd_dmamap_cb,
6914 &sense_map->physaddr, /*flags*/0);
6915
6916 sense_data = sense_map->vaddr;
6917 sense_busaddr = sense_map->physaddr;
6918 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE;
6919 #ifdef AHD_DEBUG
6920 if (ahd_debug & AHD_SHOW_MEMORY)
6921 printf("Mapped sense data\n");
6922 #endif
6923 }
6924
6925 newcount = min(scb_data->sense_left, scb_data->scbs_left);
6926 newcount = min(newcount, scb_data->sgs_left);
6927 newcount = min(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs));
6928 for (i = 0; i < newcount; i++) {
6929 struct scb_platform_data *pdata;
6930 u_int col_tag;
6931 #ifndef __linux__
6932 int error;
6933 #endif
6934
6935 next_scb = (struct scb *)malloc(sizeof(*next_scb),
6936 M_DEVBUF, M_NOWAIT);
6937 if (next_scb == NULL)
6938 break;
6939
6940 pdata = (struct scb_platform_data *)malloc(sizeof(*pdata),
6941 M_DEVBUF, M_NOWAIT);
6942 if (pdata == NULL) {
6943 free(next_scb, M_DEVBUF);
6944 break;
6945 }
6946 next_scb->platform_data = pdata;
6947 next_scb->hscb_map = hscb_map;
6948 next_scb->sg_map = sg_map;
6949 next_scb->sense_map = sense_map;
6950 next_scb->sg_list = segs;
6951 next_scb->sense_data = sense_data;
6952 next_scb->sense_busaddr = sense_busaddr;
6953 memset(hscb, 0, sizeof(*hscb));
6954 next_scb->hscb = hscb;
6955 hscb->hscb_busaddr = ahd_htole32(hscb_busaddr);
6956
6957 /*
6958 * The sequencer always starts with the second entry.
6959 * The first entry is embedded in the scb.
6960 */
6961 next_scb->sg_list_busaddr = sg_busaddr;
6962 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
6963 next_scb->sg_list_busaddr
6964 += sizeof(struct ahd_dma64_seg);
6965 else
6966 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg);
6967 next_scb->ahd_softc = ahd;
6968 next_scb->flags = SCB_FLAG_NONE;
6969 #ifndef __linux__
6970 error = ahd_dmamap_create(ahd, ahd->buffer_dmat, /*flags*/0,
6971 &next_scb->dmamap);
6972 if (error != 0) {
6973 free(next_scb, M_DEVBUF);
6974 free(pdata, M_DEVBUF);
6975 break;
6976 }
6977 #endif
6978 next_scb->hscb->tag = ahd_htole16(scb_data->numscbs);
6979 col_tag = scb_data->numscbs ^ 0x100;
6980 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag);
6981 if (next_scb->col_scb != NULL)
6982 next_scb->col_scb->col_scb = next_scb;
6983 ahd_free_scb(ahd, next_scb);
6984 hscb++;
6985 hscb_busaddr += sizeof(*hscb);
6986 segs += ahd_sglist_size(ahd);
6987 sg_busaddr += ahd_sglist_size(ahd);
6988 sense_data += AHD_SENSE_BUFSIZE;
6989 sense_busaddr += AHD_SENSE_BUFSIZE;
6990 scb_data->numscbs++;
6991 scb_data->sense_left--;
6992 scb_data->scbs_left--;
6993 scb_data->sgs_left--;
6994 }
6995 }
6996
6997 void
6998 ahd_controller_info(struct ahd_softc *ahd, char *buf)
6999 {
7000 const char *speed;
7001 const char *type;
7002 int len;
7003
7004 len = sprintf(buf, "%s: ", ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]);
7005 buf += len;
7006
7007 speed = "Ultra320 ";
7008 if ((ahd->features & AHD_WIDE) != 0) {
7009 type = "Wide ";
7010 } else {
7011 type = "Single ";
7012 }
7013 len = sprintf(buf, "%s%sChannel %c, SCSI Id=%d, ",
7014 speed, type, ahd->channel, ahd->our_id);
7015 buf += len;
7016
7017 sprintf(buf, "%s, %d SCBs", ahd->bus_description,
7018 ahd->scb_data.maxhscbs);
7019 }
7020
7021 static const char *channel_strings[] = {
7022 "Primary Low",
7023 "Primary High",
7024 "Secondary Low",
7025 "Secondary High"
7026 };
7027
7028 static const char *termstat_strings[] = {
7029 "Terminated Correctly",
7030 "Over Terminated",
7031 "Under Terminated",
7032 "Not Configured"
7033 };
7034
7035 /***************************** Timer Facilities *******************************/
7036 #define ahd_timer_init init_timer
7037 #define ahd_timer_stop del_timer_sync
7038 typedef void ahd_linux_callback_t (u_long);
7039
7040 static void
7041 ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
7042 {
7043 struct ahd_softc *ahd;
7044
7045 ahd = (struct ahd_softc *)arg;
7046 del_timer(timer);
7047 timer->data = (u_long)arg;
7048 timer->expires = jiffies + (usec * HZ)/1000000;
7049 timer->function = (ahd_linux_callback_t*)func;
7050 add_timer(timer);
7051 }
7052
7053 /*
7054 * Start the board, ready for normal operation
7055 */
7056 int
7057 ahd_init(struct ahd_softc *ahd)
7058 {
7059 uint8_t *next_vaddr;
7060 dma_addr_t next_baddr;
7061 size_t driver_data_size;
7062 int i;
7063 int error;
7064 u_int warn_user;
7065 uint8_t current_sensing;
7066 uint8_t fstat;
7067
7068 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7069
7070 ahd->stack_size = ahd_probe_stack_size(ahd);
7071 ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t),
7072 M_DEVBUF, M_NOWAIT);
7073 if (ahd->saved_stack == NULL)
7074 return (ENOMEM);
7075
7076 /*
7077 * Verify that the compiler hasn't over-agressively
7078 * padded important structures.
7079 */
7080 if (sizeof(struct hardware_scb) != 64)
7081 panic("Hardware SCB size is incorrect");
7082
7083 #ifdef AHD_DEBUG
7084 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0)
7085 ahd->flags |= AHD_SEQUENCER_DEBUG;
7086 #endif
7087
7088 /*
7089 * Default to allowing initiator operations.
7090 */
7091 ahd->flags |= AHD_INITIATORROLE;
7092
7093 /*
7094 * Only allow target mode features if this unit has them enabled.
7095 */
7096 if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0)
7097 ahd->features &= ~AHD_TARGETMODE;
7098
7099 #ifndef __linux__
7100 /* DMA tag for mapping buffers into device visible space. */
7101 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
7102 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
7103 /*lowaddr*/ahd->flags & AHD_39BIT_ADDRESSING
7104 ? (dma_addr_t)0x7FFFFFFFFFULL
7105 : BUS_SPACE_MAXADDR_32BIT,
7106 /*highaddr*/BUS_SPACE_MAXADDR,
7107 /*filter*/NULL, /*filterarg*/NULL,
7108 /*maxsize*/(AHD_NSEG - 1) * PAGE_SIZE,
7109 /*nsegments*/AHD_NSEG,
7110 /*maxsegsz*/AHD_MAXTRANSFER_SIZE,
7111 /*flags*/BUS_DMA_ALLOCNOW,
7112 &ahd->buffer_dmat) != 0) {
7113 return (ENOMEM);
7114 }
7115 #endif
7116
7117 ahd->init_level++;
7118
7119 /*
7120 * DMA tag for our command fifos and other data in system memory
7121 * the card's sequencer must be able to access. For initiator
7122 * roles, we need to allocate space for the qoutfifo. When providing
7123 * for the target mode role, we must additionally provide space for
7124 * the incoming target command fifo.
7125 */
7126 driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo)
7127 + sizeof(struct hardware_scb);
7128 if ((ahd->features & AHD_TARGETMODE) != 0)
7129 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd);
7130 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0)
7131 driver_data_size += PKT_OVERRUN_BUFSIZE;
7132 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
7133 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
7134 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
7135 /*highaddr*/BUS_SPACE_MAXADDR,
7136 /*filter*/NULL, /*filterarg*/NULL,
7137 driver_data_size,
7138 /*nsegments*/1,
7139 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
7140 /*flags*/0, &ahd->shared_data_dmat) != 0) {
7141 return (ENOMEM);
7142 }
7143
7144 ahd->init_level++;
7145
7146 /* Allocation of driver data */
7147 if (ahd_dmamem_alloc(ahd, ahd->shared_data_dmat,
7148 (void **)&ahd->shared_data_map.vaddr,
7149 BUS_DMA_NOWAIT,
7150 &ahd->shared_data_map.dmamap) != 0) {
7151 return (ENOMEM);
7152 }
7153
7154 ahd->init_level++;
7155
7156 /* And permanently map it in */
7157 ahd_dmamap_load(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
7158 ahd->shared_data_map.vaddr, driver_data_size,
7159 ahd_dmamap_cb, &ahd->shared_data_map.physaddr,
7160 /*flags*/0);
7161 ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr;
7162 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE];
7163 next_baddr = ahd->shared_data_map.physaddr
7164 + AHD_QOUT_SIZE*sizeof(struct ahd_completion);
7165 if ((ahd->features & AHD_TARGETMODE) != 0) {
7166 ahd->targetcmds = (struct target_cmd *)next_vaddr;
7167 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd);
7168 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd);
7169 }
7170
7171 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) {
7172 ahd->overrun_buf = next_vaddr;
7173 next_vaddr += PKT_OVERRUN_BUFSIZE;
7174 next_baddr += PKT_OVERRUN_BUFSIZE;
7175 }
7176
7177 /*
7178 * We need one SCB to serve as the "next SCB". Since the
7179 * tag identifier in this SCB will never be used, there is
7180 * no point in using a valid HSCB tag from an SCB pulled from
7181 * the standard free pool. So, we allocate this "sentinel"
7182 * specially from the DMA safe memory chunk used for the QOUTFIFO.
7183 */
7184 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr;
7185 ahd->next_queued_hscb_map = &ahd->shared_data_map;
7186 ahd->next_queued_hscb->hscb_busaddr = ahd_htole32(next_baddr);
7187
7188 ahd->init_level++;
7189
7190 /* Allocate SCB data now that buffer_dmat is initialized */
7191 if (ahd_init_scbdata(ahd) != 0)
7192 return (ENOMEM);
7193
7194 if ((ahd->flags & AHD_INITIATORROLE) == 0)
7195 ahd->flags &= ~AHD_RESET_BUS_A;
7196
7197 /*
7198 * Before committing these settings to the chip, give
7199 * the OSM one last chance to modify our configuration.
7200 */
7201 ahd_platform_init(ahd);
7202
7203 /* Bring up the chip. */
7204 ahd_chip_init(ahd);
7205
7206 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7207
7208 if ((ahd->flags & AHD_CURRENT_SENSING) == 0)
7209 goto init_done;
7210
7211 /*
7212 * Verify termination based on current draw and
7213 * warn user if the bus is over/under terminated.
7214 */
7215 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL,
7216 CURSENSE_ENB);
7217 if (error != 0) {
7218 printf("%s: current sensing timeout 1\n", ahd_name(ahd));
7219 goto init_done;
7220 }
7221 for (i = 20, fstat = FLX_FSTAT_BUSY;
7222 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) {
7223 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat);
7224 if (error != 0) {
7225 printf("%s: current sensing timeout 2\n",
7226 ahd_name(ahd));
7227 goto init_done;
7228 }
7229 }
7230 if (i == 0) {
7231 printf("%s: Timedout during current-sensing test\n",
7232 ahd_name(ahd));
7233 goto init_done;
7234 }
7235
7236 /* Latch Current Sensing status. */
7237 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, &current_sensing);
7238 if (error != 0) {
7239 printf("%s: current sensing timeout 3\n", ahd_name(ahd));
7240 goto init_done;
7241 }
7242
7243 /* Diable current sensing. */
7244 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0);
7245
7246 #ifdef AHD_DEBUG
7247 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) {
7248 printf("%s: current_sensing == 0x%x\n",
7249 ahd_name(ahd), current_sensing);
7250 }
7251 #endif
7252 warn_user = 0;
7253 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) {
7254 u_int term_stat;
7255
7256 term_stat = (current_sensing & FLX_CSTAT_MASK);
7257 switch (term_stat) {
7258 case FLX_CSTAT_OVER:
7259 case FLX_CSTAT_UNDER:
7260 warn_user++;
7261 case FLX_CSTAT_INVALID:
7262 case FLX_CSTAT_OKAY:
7263 if (warn_user == 0 && bootverbose == 0)
7264 break;
7265 printf("%s: %s Channel %s\n", ahd_name(ahd),
7266 channel_strings[i], termstat_strings[term_stat]);
7267 break;
7268 }
7269 }
7270 if (warn_user) {
7271 printf("%s: WARNING. Termination is not configured correctly.\n"
7272 "%s: WARNING. SCSI bus operations may FAIL.\n",
7273 ahd_name(ahd), ahd_name(ahd));
7274 }
7275 init_done:
7276 ahd_restart(ahd);
7277 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US,
7278 ahd_stat_timer, ahd);
7279 return (0);
7280 }
7281
7282 /*
7283 * (Re)initialize chip state after a chip reset.
7284 */
7285 static void
7286 ahd_chip_init(struct ahd_softc *ahd)
7287 {
7288 uint32_t busaddr;
7289 u_int sxfrctl1;
7290 u_int scsiseq_template;
7291 u_int wait;
7292 u_int i;
7293 u_int target;
7294
7295 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7296 /*
7297 * Take the LED out of diagnostic mode
7298 */
7299 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON));
7300
7301 /*
7302 * Return HS_MAILBOX to its default value.
7303 */
7304 ahd->hs_mailbox = 0;
7305 ahd_outb(ahd, HS_MAILBOX, 0);
7306
7307 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */
7308 ahd_outb(ahd, IOWNID, ahd->our_id);
7309 ahd_outb(ahd, TOWNID, ahd->our_id);
7310 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0;
7311 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0;
7312 if ((ahd->bugs & AHD_LONG_SETIMO_BUG)
7313 && (ahd->seltime != STIMESEL_MIN)) {
7314 /*
7315 * The selection timer duration is twice as long
7316 * as it should be. Halve it by adding "1" to
7317 * the user specified setting.
7318 */
7319 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ;
7320 } else {
7321 sxfrctl1 |= ahd->seltime;
7322 }
7323
7324 ahd_outb(ahd, SXFRCTL0, DFON);
7325 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN);
7326 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
7327
7328 /*
7329 * Now that termination is set, wait for up
7330 * to 500ms for our transceivers to settle. If
7331 * the adapter does not have a cable attached,
7332 * the transceivers may never settle, so don't
7333 * complain if we fail here.
7334 */
7335 for (wait = 10000;
7336 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait;
7337 wait--)
7338 ahd_delay(100);
7339
7340 /* Clear any false bus resets due to the transceivers settling */
7341 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
7342 ahd_outb(ahd, CLRINT, CLRSCSIINT);
7343
7344 /* Initialize mode specific S/G state. */
7345 for (i = 0; i < 2; i++) {
7346 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
7347 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
7348 ahd_outb(ahd, SG_STATE, 0);
7349 ahd_outb(ahd, CLRSEQINTSRC, 0xFF);
7350 ahd_outb(ahd, SEQIMODE,
7351 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT
7352 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD);
7353 }
7354
7355 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
7356 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN);
7357 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75);
7358 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN);
7359 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR);
7360 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
7361 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE);
7362 } else {
7363 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE);
7364 }
7365 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS);
7366 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX)
7367 /*
7368 * Do not issue a target abort when a split completion
7369 * error occurs. Let our PCIX interrupt handler deal
7370 * with it instead. H2A4 Razor #625
7371 */
7372 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS);
7373
7374 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0)
7375 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER);
7376
7377 /*
7378 * Tweak IOCELL settings.
7379 */
7380 if ((ahd->flags & AHD_HP_BOARD) != 0) {
7381 for (i = 0; i < NUMDSPS; i++) {
7382 ahd_outb(ahd, DSPSELECT, i);
7383 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT);
7384 }
7385 #ifdef AHD_DEBUG
7386 if ((ahd_debug & AHD_SHOW_MISC) != 0)
7387 printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd),
7388 WRTBIASCTL_HP_DEFAULT);
7389 #endif
7390 }
7391 ahd_setup_iocell_workaround(ahd);
7392
7393 /*
7394 * Enable LQI Manager interrupts.
7395 */
7396 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT
7397 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI
7398 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ);
7399 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC);
7400 /*
7401 * We choose to have the sequencer catch LQOPHCHGINPKT errors
7402 * manually for the command phase at the start of a packetized
7403 * selection case. ENLQOBUSFREE should be made redundant by
7404 * the BUSFREE interrupt, but it seems that some LQOBUSFREE
7405 * events fail to assert the BUSFREE interrupt so we must
7406 * also enable LQOBUSFREE interrupts.
7407 */
7408 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE);
7409
7410 /*
7411 * Setup sequencer interrupt handlers.
7412 */
7413 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr));
7414 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr));
7415
7416 /*
7417 * Setup SCB Offset registers.
7418 */
7419 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
7420 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb,
7421 pkt_long_lun));
7422 } else {
7423 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun));
7424 }
7425 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len));
7426 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute));
7427 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management));
7428 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb,
7429 shared_data.idata.cdb));
7430 ahd_outb(ahd, QNEXTPTR,
7431 offsetof(struct hardware_scb, next_hscb_busaddr));
7432 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET);
7433 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control));
7434 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
7435 ahd_outb(ahd, LUNLEN,
7436 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1);
7437 } else {
7438 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN);
7439 }
7440 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1);
7441 ahd_outb(ahd, MAXCMD, 0xFF);
7442 ahd_outb(ahd, SCBAUTOPTR,
7443 AUSCBPTR_EN | offsetof(struct hardware_scb, tag));
7444
7445 /* We haven't been enabled for target mode yet. */
7446 ahd_outb(ahd, MULTARGID, 0);
7447 ahd_outb(ahd, MULTARGID + 1, 0);
7448
7449 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7450 /* Initialize the negotiation table. */
7451 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) {
7452 /*
7453 * Clear the spare bytes in the neg table to avoid
7454 * spurious parity errors.
7455 */
7456 for (target = 0; target < AHD_NUM_TARGETS; target++) {
7457 ahd_outb(ahd, NEGOADDR, target);
7458 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0);
7459 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++)
7460 ahd_outb(ahd, ANNEXDAT, 0);
7461 }
7462 }
7463 for (target = 0; target < AHD_NUM_TARGETS; target++) {
7464 struct ahd_devinfo devinfo;
7465 struct ahd_initiator_tinfo *tinfo;
7466 struct ahd_tmode_tstate *tstate;
7467
7468 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
7469 target, &tstate);
7470 ahd_compile_devinfo(&devinfo, ahd->our_id,
7471 target, CAM_LUN_WILDCARD,
7472 'A', ROLE_INITIATOR);
7473 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr);
7474 }
7475
7476 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR);
7477 ahd_outb(ahd, CLRINT, CLRSCSIINT);
7478
7479 #ifdef NEEDS_MORE_TESTING
7480 /*
7481 * Always enable abort on incoming L_Qs if this feature is
7482 * supported. We use this to catch invalid SCB references.
7483 */
7484 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0)
7485 ahd_outb(ahd, LQCTL1, ABORTPENDING);
7486 else
7487 #endif
7488 ahd_outb(ahd, LQCTL1, 0);
7489
7490 /* All of our queues are empty */
7491 ahd->qoutfifonext = 0;
7492 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID;
7493 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID);
7494 for (i = 0; i < AHD_QOUT_SIZE; i++)
7495 ahd->qoutfifo[i].valid_tag = 0;
7496 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD);
7497
7498 ahd->qinfifonext = 0;
7499 for (i = 0; i < AHD_QIN_SIZE; i++)
7500 ahd->qinfifo[i] = SCB_LIST_NULL;
7501
7502 if ((ahd->features & AHD_TARGETMODE) != 0) {
7503 /* All target command blocks start out invalid. */
7504 for (i = 0; i < AHD_TMODE_CMDS; i++)
7505 ahd->targetcmds[i].cmd_valid = 0;
7506 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD);
7507 ahd->tqinfifonext = 1;
7508 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1);
7509 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);
7510 }
7511
7512 /* Initialize Scratch Ram. */
7513 ahd_outb(ahd, SEQ_FLAGS, 0);
7514 ahd_outb(ahd, SEQ_FLAGS2, 0);
7515
7516 /* We don't have any waiting selections */
7517 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL);
7518 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL);
7519 ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL);
7520 ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF);
7521 for (i = 0; i < AHD_NUM_TARGETS; i++)
7522 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL);
7523
7524 /*
7525 * Nobody is waiting to be DMAed into the QOUTFIFO.
7526 */
7527 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);
7528 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL);
7529 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
7530 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL);
7531 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL);
7532
7533 /*
7534 * The Freeze Count is 0.
7535 */
7536 ahd->qfreeze_cnt = 0;
7537 ahd_outw(ahd, QFREEZE_COUNT, 0);
7538 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0);
7539
7540 /*
7541 * Tell the sequencer where it can find our arrays in memory.
7542 */
7543 busaddr = ahd->shared_data_map.physaddr;
7544 ahd_outl(ahd, SHARED_DATA_ADDR, busaddr);
7545 ahd_outl(ahd, QOUTFIFO_NEXT_ADDR, busaddr);
7546
7547 /*
7548 * Setup the allowed SCSI Sequences based on operational mode.
7549 * If we are a target, we'll enable select in operations once
7550 * we've had a lun enabled.
7551 */
7552 scsiseq_template = ENAUTOATNP;
7553 if ((ahd->flags & AHD_INITIATORROLE) != 0)
7554 scsiseq_template |= ENRSELI;
7555 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template);
7556
7557 /* There are no busy SCBs yet. */
7558 for (target = 0; target < AHD_NUM_TARGETS; target++) {
7559 int lun;
7560
7561 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++)
7562 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun));
7563 }
7564
7565 /*
7566 * Initialize the group code to command length table.
7567 * Vendor Unique codes are set to 0 so we only capture
7568 * the first byte of the cdb. These can be overridden
7569 * when target mode is enabled.
7570 */
7571 ahd_outb(ahd, CMDSIZE_TABLE, 5);
7572 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9);
7573 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9);
7574 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0);
7575 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15);
7576 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11);
7577 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0);
7578 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0);
7579
7580 /* Tell the sequencer of our initial queue positions */
7581 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
7582 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512);
7583 ahd->qinfifonext = 0;
7584 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
7585 ahd_set_hescb_qoff(ahd, 0);
7586 ahd_set_snscb_qoff(ahd, 0);
7587 ahd_set_sescb_qoff(ahd, 0);
7588 ahd_set_sdscb_qoff(ahd, 0);
7589
7590 /*
7591 * Tell the sequencer which SCB will be the next one it receives.
7592 */
7593 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr);
7594 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);
7595
7596 /*
7597 * Default to coalescing disabled.
7598 */
7599 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0);
7600 ahd_outw(ahd, CMDS_PENDING, 0);
7601 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer,
7602 ahd->int_coalescing_maxcmds,
7603 ahd->int_coalescing_mincmds);
7604 ahd_enable_coalescing(ahd, FALSE);
7605
7606 ahd_loadseq(ahd);
7607 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7608
7609 if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
7610 u_int negodat3 = ahd_inb(ahd, NEGCONOPTS);
7611
7612 negodat3 |= ENSLOWCRC;
7613 ahd_outb(ahd, NEGCONOPTS, negodat3);
7614 negodat3 = ahd_inb(ahd, NEGCONOPTS);
7615 if (!(negodat3 & ENSLOWCRC))
7616 printf("aic79xx: failed to set the SLOWCRC bit\n");
7617 else
7618 printf("aic79xx: SLOWCRC bit set\n");
7619 }
7620 }
7621
7622 /*
7623 * Setup default device and controller settings.
7624 * This should only be called if our probe has
7625 * determined that no configuration data is available.
7626 */
7627 int
7628 ahd_default_config(struct ahd_softc *ahd)
7629 {
7630 int targ;
7631
7632 ahd->our_id = 7;
7633
7634 /*
7635 * Allocate a tstate to house information for our
7636 * initiator presence on the bus as well as the user
7637 * data for any target mode initiator.
7638 */
7639 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) {
7640 printf("%s: unable to allocate ahd_tmode_tstate. "
7641 "Failing attach\n", ahd_name(ahd));
7642 return (ENOMEM);
7643 }
7644
7645 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) {
7646 struct ahd_devinfo devinfo;
7647 struct ahd_initiator_tinfo *tinfo;
7648 struct ahd_tmode_tstate *tstate;
7649 uint16_t target_mask;
7650
7651 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
7652 targ, &tstate);
7653 /*
7654 * We support SPC2 and SPI4.
7655 */
7656 tinfo->user.protocol_version = 4;
7657 tinfo->user.transport_version = 4;
7658
7659 target_mask = 0x01 << targ;
7660 ahd->user_discenable |= target_mask;
7661 tstate->discenable |= target_mask;
7662 ahd->user_tagenable |= target_mask;
7663 #ifdef AHD_FORCE_160
7664 tinfo->user.period = AHD_SYNCRATE_DT;
7665 #else
7666 tinfo->user.period = AHD_SYNCRATE_160;
7667 #endif
7668 tinfo->user.offset = MAX_OFFSET;
7669 tinfo->user.ppr_options = MSG_EXT_PPR_RD_STRM
7670 | MSG_EXT_PPR_WR_FLOW
7671 | MSG_EXT_PPR_HOLD_MCS
7672 | MSG_EXT_PPR_IU_REQ
7673 | MSG_EXT_PPR_QAS_REQ
7674 | MSG_EXT_PPR_DT_REQ;
7675 if ((ahd->features & AHD_RTI) != 0)
7676 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI;
7677
7678 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
7679
7680 /*
7681 * Start out Async/Narrow/Untagged and with
7682 * conservative protocol support.
7683 */
7684 tinfo->goal.protocol_version = 2;
7685 tinfo->goal.transport_version = 2;
7686 tinfo->curr.protocol_version = 2;
7687 tinfo->curr.transport_version = 2;
7688 ahd_compile_devinfo(&devinfo, ahd->our_id,
7689 targ, CAM_LUN_WILDCARD,
7690 'A', ROLE_INITIATOR);
7691 tstate->tagenable &= ~target_mask;
7692 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
7693 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE);
7694 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
7695 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL,
7696 /*paused*/TRUE);
7697 }
7698 return (0);
7699 }
7700
7701 /*
7702 * Parse device configuration information.
7703 */
7704 int
7705 ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc)
7706 {
7707 int targ;
7708 int max_targ;
7709
7710 max_targ = sc->max_targets & CFMAXTARG;
7711 ahd->our_id = sc->brtime_id & CFSCSIID;
7712
7713 /*
7714 * Allocate a tstate to house information for our
7715 * initiator presence on the bus as well as the user
7716 * data for any target mode initiator.
7717 */
7718 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) {
7719 printf("%s: unable to allocate ahd_tmode_tstate. "
7720 "Failing attach\n", ahd_name(ahd));
7721 return (ENOMEM);
7722 }
7723
7724 for (targ = 0; targ < max_targ; targ++) {
7725 struct ahd_devinfo devinfo;
7726 struct ahd_initiator_tinfo *tinfo;
7727 struct ahd_transinfo *user_tinfo;
7728 struct ahd_tmode_tstate *tstate;
7729 uint16_t target_mask;
7730
7731 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
7732 targ, &tstate);
7733 user_tinfo = &tinfo->user;
7734
7735 /*
7736 * We support SPC2 and SPI4.
7737 */
7738 tinfo->user.protocol_version = 4;
7739 tinfo->user.transport_version = 4;
7740
7741 target_mask = 0x01 << targ;
7742 ahd->user_discenable &= ~target_mask;
7743 tstate->discenable &= ~target_mask;
7744 ahd->user_tagenable &= ~target_mask;
7745 if (sc->device_flags[targ] & CFDISC) {
7746 tstate->discenable |= target_mask;
7747 ahd->user_discenable |= target_mask;
7748 ahd->user_tagenable |= target_mask;
7749 } else {
7750 /*
7751 * Cannot be packetized without disconnection.
7752 */
7753 sc->device_flags[targ] &= ~CFPACKETIZED;
7754 }
7755
7756 user_tinfo->ppr_options = 0;
7757 user_tinfo->period = (sc->device_flags[targ] & CFXFER);
7758 if (user_tinfo->period < CFXFER_ASYNC) {
7759 if (user_tinfo->period <= AHD_PERIOD_10MHz)
7760 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ;
7761 user_tinfo->offset = MAX_OFFSET;
7762 } else {
7763 user_tinfo->offset = 0;
7764 user_tinfo->period = AHD_ASYNC_XFER_PERIOD;
7765 }
7766 #ifdef AHD_FORCE_160
7767 if (user_tinfo->period <= AHD_SYNCRATE_160)
7768 user_tinfo->period = AHD_SYNCRATE_DT;
7769 #endif
7770
7771 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) {
7772 user_tinfo->ppr_options |= MSG_EXT_PPR_RD_STRM
7773 | MSG_EXT_PPR_WR_FLOW
7774 | MSG_EXT_PPR_HOLD_MCS
7775 | MSG_EXT_PPR_IU_REQ;
7776 if ((ahd->features & AHD_RTI) != 0)
7777 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI;
7778 }
7779
7780 if ((sc->device_flags[targ] & CFQAS) != 0)
7781 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ;
7782
7783 if ((sc->device_flags[targ] & CFWIDEB) != 0)
7784 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT;
7785 else
7786 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT;
7787 #ifdef AHD_DEBUG
7788 if ((ahd_debug & AHD_SHOW_MISC) != 0)
7789 printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width,
7790 user_tinfo->period, user_tinfo->offset,
7791 user_tinfo->ppr_options);
7792 #endif
7793 /*
7794 * Start out Async/Narrow/Untagged and with
7795 * conservative protocol support.
7796 */
7797 tstate->tagenable &= ~target_mask;
7798 tinfo->goal.protocol_version = 2;
7799 tinfo->goal.transport_version = 2;
7800 tinfo->curr.protocol_version = 2;
7801 tinfo->curr.transport_version = 2;
7802 ahd_compile_devinfo(&devinfo, ahd->our_id,
7803 targ, CAM_LUN_WILDCARD,
7804 'A', ROLE_INITIATOR);
7805 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
7806 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE);
7807 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
7808 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL,
7809 /*paused*/TRUE);
7810 }
7811
7812 ahd->flags &= ~AHD_SPCHK_ENB_A;
7813 if (sc->bios_control & CFSPARITY)
7814 ahd->flags |= AHD_SPCHK_ENB_A;
7815
7816 ahd->flags &= ~AHD_RESET_BUS_A;
7817 if (sc->bios_control & CFRESETB)
7818 ahd->flags |= AHD_RESET_BUS_A;
7819
7820 ahd->flags &= ~AHD_EXTENDED_TRANS_A;
7821 if (sc->bios_control & CFEXTEND)
7822 ahd->flags |= AHD_EXTENDED_TRANS_A;
7823
7824 ahd->flags &= ~AHD_BIOS_ENABLED;
7825 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED)
7826 ahd->flags |= AHD_BIOS_ENABLED;
7827
7828 ahd->flags &= ~AHD_STPWLEVEL_A;
7829 if ((sc->adapter_control & CFSTPWLEVEL) != 0)
7830 ahd->flags |= AHD_STPWLEVEL_A;
7831
7832 return (0);
7833 }
7834
7835 /*
7836 * Parse device configuration information.
7837 */
7838 int
7839 ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd)
7840 {
7841 int error;
7842
7843 error = ahd_verify_vpd_cksum(vpd);
7844 if (error == 0)
7845 return (EINVAL);
7846 if ((vpd->bios_flags & VPDBOOTHOST) != 0)
7847 ahd->flags |= AHD_BOOT_CHANNEL;
7848 return (0);
7849 }
7850
7851 void
7852 ahd_intr_enable(struct ahd_softc *ahd, int enable)
7853 {
7854 u_int hcntrl;
7855
7856 hcntrl = ahd_inb(ahd, HCNTRL);
7857 hcntrl &= ~INTEN;
7858 ahd->pause &= ~INTEN;
7859 ahd->unpause &= ~INTEN;
7860 if (enable) {
7861 hcntrl |= INTEN;
7862 ahd->pause |= INTEN;
7863 ahd->unpause |= INTEN;
7864 }
7865 ahd_outb(ahd, HCNTRL, hcntrl);
7866 }
7867
7868 static void
7869 ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds,
7870 u_int mincmds)
7871 {
7872 if (timer > AHD_TIMER_MAX_US)
7873 timer = AHD_TIMER_MAX_US;
7874 ahd->int_coalescing_timer = timer;
7875
7876 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX)
7877 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX;
7878 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX)
7879 mincmds = AHD_INT_COALESCING_MINCMDS_MAX;
7880 ahd->int_coalescing_maxcmds = maxcmds;
7881 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK);
7882 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds);
7883 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds);
7884 }
7885
7886 static void
7887 ahd_enable_coalescing(struct ahd_softc *ahd, int enable)
7888 {
7889
7890 ahd->hs_mailbox &= ~ENINT_COALESCE;
7891 if (enable)
7892 ahd->hs_mailbox |= ENINT_COALESCE;
7893 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox);
7894 ahd_flush_device_writes(ahd);
7895 ahd_run_qoutfifo(ahd);
7896 }
7897
7898 /*
7899 * Ensure that the card is paused in a location
7900 * outside of all critical sections and that all
7901 * pending work is completed prior to returning.
7902 * This routine should only be called from outside
7903 * an interrupt context.
7904 */
7905 void
7906 ahd_pause_and_flushwork(struct ahd_softc *ahd)
7907 {
7908 u_int intstat;
7909 u_int maxloops;
7910
7911 maxloops = 1000;
7912 ahd->flags |= AHD_ALL_INTERRUPTS;
7913 ahd_pause(ahd);
7914 /*
7915 * Freeze the outgoing selections. We do this only
7916 * until we are safely paused without further selections
7917 * pending.
7918 */
7919 ahd->qfreeze_cnt--;
7920 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);
7921 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN);
7922 do {
7923
7924 ahd_unpause(ahd);
7925 /*
7926 * Give the sequencer some time to service
7927 * any active selections.
7928 */
7929 ahd_delay(500);
7930
7931 ahd_intr(ahd);
7932 ahd_pause(ahd);
7933 intstat = ahd_inb(ahd, INTSTAT);
7934 if ((intstat & INT_PEND) == 0) {
7935 ahd_clear_critical_section(ahd);
7936 intstat = ahd_inb(ahd, INTSTAT);
7937 }
7938 } while (--maxloops
7939 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0)
7940 && ((intstat & INT_PEND) != 0
7941 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
7942 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0));
7943
7944 if (maxloops == 0) {
7945 printf("Infinite interrupt loop, INTSTAT = %x",
7946 ahd_inb(ahd, INTSTAT));
7947 }
7948 ahd->qfreeze_cnt++;
7949 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);
7950
7951 ahd_flush_qoutfifo(ahd);
7952
7953 ahd->flags &= ~AHD_ALL_INTERRUPTS;
7954 }
7955
7956 #ifdef CONFIG_PM
7957 int
7958 ahd_suspend(struct ahd_softc *ahd)
7959 {
7960
7961 ahd_pause_and_flushwork(ahd);
7962
7963 if (LIST_FIRST(&ahd->pending_scbs) != NULL) {
7964 ahd_unpause(ahd);
7965 return (EBUSY);
7966 }
7967 ahd_shutdown(ahd);
7968 return (0);
7969 }
7970
7971 void
7972 ahd_resume(struct ahd_softc *ahd)
7973 {
7974
7975 ahd_reset(ahd, /*reinit*/TRUE);
7976 ahd_intr_enable(ahd, TRUE);
7977 ahd_restart(ahd);
7978 }
7979 #endif
7980
7981 /************************** Busy Target Table *********************************/
7982 /*
7983 * Set SCBPTR to the SCB that contains the busy
7984 * table entry for TCL. Return the offset into
7985 * the SCB that contains the entry for TCL.
7986 * saved_scbid is dereferenced and set to the
7987 * scbid that should be restored once manipualtion
7988 * of the TCL entry is complete.
7989 */
7990 static __inline u_int
7991 ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl)
7992 {
7993 /*
7994 * Index to the SCB that contains the busy entry.
7995 */
7996 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7997 *saved_scbid = ahd_get_scbptr(ahd);
7998 ahd_set_scbptr(ahd, TCL_LUN(tcl)
7999 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4));
8000
8001 /*
8002 * And now calculate the SCB offset to the entry.
8003 * Each entry is 2 bytes wide, hence the
8004 * multiplication by 2.
8005 */
8006 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS);
8007 }
8008
8009 /*
8010 * Return the untagged transaction id for a given target/channel lun.
8011 */
8012 static u_int
8013 ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl)
8014 {
8015 u_int scbid;
8016 u_int scb_offset;
8017 u_int saved_scbptr;
8018
8019 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl);
8020 scbid = ahd_inw_scbram(ahd, scb_offset);
8021 ahd_set_scbptr(ahd, saved_scbptr);
8022 return (scbid);
8023 }
8024
8025 static void
8026 ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid)
8027 {
8028 u_int scb_offset;
8029 u_int saved_scbptr;
8030
8031 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl);
8032 ahd_outw(ahd, scb_offset, scbid);
8033 ahd_set_scbptr(ahd, saved_scbptr);
8034 }
8035
8036 /************************** SCB and SCB queue management **********************/
8037 static int
8038 ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target,
8039 char channel, int lun, u_int tag, role_t role)
8040 {
8041 int targ = SCB_GET_TARGET(ahd, scb);
8042 char chan = SCB_GET_CHANNEL(ahd, scb);
8043 int slun = SCB_GET_LUN(scb);
8044 int match;
8045
8046 match = ((chan == channel) || (channel == ALL_CHANNELS));
8047 if (match != 0)
8048 match = ((targ == target) || (target == CAM_TARGET_WILDCARD));
8049 if (match != 0)
8050 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD));
8051 if (match != 0) {
8052 #ifdef AHD_TARGET_MODE
8053 int group;
8054
8055 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code);
8056 if (role == ROLE_INITIATOR) {
8057 match = (group != XPT_FC_GROUP_TMODE)
8058 && ((tag == SCB_GET_TAG(scb))
8059 || (tag == SCB_LIST_NULL));
8060 } else if (role == ROLE_TARGET) {
8061 match = (group == XPT_FC_GROUP_TMODE)
8062 && ((tag == scb->io_ctx->csio.tag_id)
8063 || (tag == SCB_LIST_NULL));
8064 }
8065 #else /* !AHD_TARGET_MODE */
8066 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL));
8067 #endif /* AHD_TARGET_MODE */
8068 }
8069
8070 return match;
8071 }
8072
8073 static void
8074 ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
8075 {
8076 int target;
8077 char channel;
8078 int lun;
8079
8080 target = SCB_GET_TARGET(ahd, scb);
8081 lun = SCB_GET_LUN(scb);
8082 channel = SCB_GET_CHANNEL(ahd, scb);
8083
8084 ahd_search_qinfifo(ahd, target, channel, lun,
8085 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN,
8086 CAM_REQUEUE_REQ, SEARCH_COMPLETE);
8087
8088 ahd_platform_freeze_devq(ahd, scb);
8089 }
8090
8091 void
8092 ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb)
8093 {
8094 struct scb *prev_scb;
8095 ahd_mode_state saved_modes;
8096
8097 saved_modes = ahd_save_modes(ahd);
8098 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
8099 prev_scb = NULL;
8100 if (ahd_qinfifo_count(ahd) != 0) {
8101 u_int prev_tag;
8102 u_int prev_pos;
8103
8104 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1);
8105 prev_tag = ahd->qinfifo[prev_pos];
8106 prev_scb = ahd_lookup_scb(ahd, prev_tag);
8107 }
8108 ahd_qinfifo_requeue(ahd, prev_scb, scb);
8109 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
8110 ahd_restore_modes(ahd, saved_modes);
8111 }
8112
8113 static void
8114 ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb,
8115 struct scb *scb)
8116 {
8117 if (prev_scb == NULL) {
8118 uint32_t busaddr;
8119
8120 busaddr = ahd_le32toh(scb->hscb->hscb_busaddr);
8121 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);
8122 } else {
8123 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
8124 ahd_sync_scb(ahd, prev_scb,
8125 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
8126 }
8127 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
8128 ahd->qinfifonext++;
8129 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr;
8130 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
8131 }
8132
8133 static int
8134 ahd_qinfifo_count(struct ahd_softc *ahd)
8135 {
8136 u_int qinpos;
8137 u_int wrap_qinpos;
8138 u_int wrap_qinfifonext;
8139
8140 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
8141 qinpos = ahd_get_snscb_qoff(ahd);
8142 wrap_qinpos = AHD_QIN_WRAP(qinpos);
8143 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext);
8144 if (wrap_qinfifonext >= wrap_qinpos)
8145 return (wrap_qinfifonext - wrap_qinpos);
8146 else
8147 return (wrap_qinfifonext
8148 + ARRAY_SIZE(ahd->qinfifo) - wrap_qinpos);
8149 }
8150
8151 static void
8152 ahd_reset_cmds_pending(struct ahd_softc *ahd)
8153 {
8154 struct scb *scb;
8155 ahd_mode_state saved_modes;
8156 u_int pending_cmds;
8157
8158 saved_modes = ahd_save_modes(ahd);
8159 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
8160
8161 /*
8162 * Don't count any commands as outstanding that the
8163 * sequencer has already marked for completion.
8164 */
8165 ahd_flush_qoutfifo(ahd);
8166
8167 pending_cmds = 0;
8168 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
8169 pending_cmds++;
8170 }
8171 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd));
8172 ahd_restore_modes(ahd, saved_modes);
8173 ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
8174 }
8175
8176 static void
8177 ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status)
8178 {
8179 cam_status ostat;
8180 cam_status cstat;
8181
8182 ostat = ahd_get_transaction_status(scb);
8183 if (ostat == CAM_REQ_INPROG)
8184 ahd_set_transaction_status(scb, status);
8185 cstat = ahd_get_transaction_status(scb);
8186 if (cstat != CAM_REQ_CMP)
8187 ahd_freeze_scb(scb);
8188 ahd_done(ahd, scb);
8189 }
8190
8191 int
8192 ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel,
8193 int lun, u_int tag, role_t role, uint32_t status,
8194 ahd_search_action action)
8195 {
8196 struct scb *scb;
8197 struct scb *mk_msg_scb;
8198 struct scb *prev_scb;
8199 ahd_mode_state saved_modes;
8200 u_int qinstart;
8201 u_int qinpos;
8202 u_int qintail;
8203 u_int tid_next;
8204 u_int tid_prev;
8205 u_int scbid;
8206 u_int seq_flags2;
8207 u_int savedscbptr;
8208 uint32_t busaddr;
8209 int found;
8210 int targets;
8211
8212 /* Must be in CCHAN mode */
8213 saved_modes = ahd_save_modes(ahd);
8214 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
8215
8216 /*
8217 * Halt any pending SCB DMA. The sequencer will reinitiate
8218 * this dma if the qinfifo is not empty once we unpause.
8219 */
8220 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR))
8221 == (CCARREN|CCSCBEN|CCSCBDIR)) {
8222 ahd_outb(ahd, CCSCBCTL,
8223 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN));
8224 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0)
8225 ;
8226 }
8227 /* Determine sequencer's position in the qinfifo. */
8228 qintail = AHD_QIN_WRAP(ahd->qinfifonext);
8229 qinstart = ahd_get_snscb_qoff(ahd);
8230 qinpos = AHD_QIN_WRAP(qinstart);
8231 found = 0;
8232 prev_scb = NULL;
8233
8234 if (action == SEARCH_PRINT) {
8235 printf("qinstart = %d qinfifonext = %d\nQINFIFO:",
8236 qinstart, ahd->qinfifonext);
8237 }
8238
8239 /*
8240 * Start with an empty queue. Entries that are not chosen
8241 * for removal will be re-added to the queue as we go.
8242 */
8243 ahd->qinfifonext = qinstart;
8244 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr);
8245 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);
8246
8247 while (qinpos != qintail) {
8248 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]);
8249 if (scb == NULL) {
8250 printf("qinpos = %d, SCB index = %d\n",
8251 qinpos, ahd->qinfifo[qinpos]);
8252 panic("Loop 1\n");
8253 }
8254
8255 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) {
8256 /*
8257 * We found an scb that needs to be acted on.
8258 */
8259 found++;
8260 switch (action) {
8261 case SEARCH_COMPLETE:
8262 if ((scb->flags & SCB_ACTIVE) == 0)
8263 printf("Inactive SCB in qinfifo\n");
8264 ahd_done_with_status(ahd, scb, status);
8265 /* FALLTHROUGH */
8266 case SEARCH_REMOVE:
8267 break;
8268 case SEARCH_PRINT:
8269 printf(" 0x%x", ahd->qinfifo[qinpos]);
8270 /* FALLTHROUGH */
8271 case SEARCH_COUNT:
8272 ahd_qinfifo_requeue(ahd, prev_scb, scb);
8273 prev_scb = scb;
8274 break;
8275 }
8276 } else {
8277 ahd_qinfifo_requeue(ahd, prev_scb, scb);
8278 prev_scb = scb;
8279 }
8280 qinpos = AHD_QIN_WRAP(qinpos+1);
8281 }
8282
8283 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
8284
8285 if (action == SEARCH_PRINT)
8286 printf("\nWAITING_TID_QUEUES:\n");
8287
8288 /*
8289 * Search waiting for selection lists. We traverse the
8290 * list of "their ids" waiting for selection and, if
8291 * appropriate, traverse the SCBs of each "their id"
8292 * looking for matches.
8293 */
8294 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
8295 seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2);
8296 if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) {
8297 scbid = ahd_inw(ahd, MK_MESSAGE_SCB);
8298 mk_msg_scb = ahd_lookup_scb(ahd, scbid);
8299 } else
8300 mk_msg_scb = NULL;
8301 savedscbptr = ahd_get_scbptr(ahd);
8302 tid_next = ahd_inw(ahd, WAITING_TID_HEAD);
8303 tid_prev = SCB_LIST_NULL;
8304 targets = 0;
8305 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) {
8306 u_int tid_head;
8307 u_int tid_tail;
8308
8309 targets++;
8310 if (targets > AHD_NUM_TARGETS)
8311 panic("TID LIST LOOP");
8312
8313 if (scbid >= ahd->scb_data.numscbs) {
8314 printf("%s: Waiting TID List inconsistency. "
8315 "SCB index == 0x%x, yet numscbs == 0x%x.",
8316 ahd_name(ahd), scbid, ahd->scb_data.numscbs);
8317 ahd_dump_card_state(ahd);
8318 panic("for safety");
8319 }
8320 scb = ahd_lookup_scb(ahd, scbid);
8321 if (scb == NULL) {
8322 printf("%s: SCB = 0x%x Not Active!\n",
8323 ahd_name(ahd), scbid);
8324 panic("Waiting TID List traversal\n");
8325 }
8326 ahd_set_scbptr(ahd, scbid);
8327 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2);
8328 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
8329 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) {
8330 tid_prev = scbid;
8331 continue;
8332 }
8333
8334 /*
8335 * We found a list of scbs that needs to be searched.
8336 */
8337 if (action == SEARCH_PRINT)
8338 printf(" %d ( ", SCB_GET_TARGET(ahd, scb));
8339 tid_head = scbid;
8340 found += ahd_search_scb_list(ahd, target, channel,
8341 lun, tag, role, status,
8342 action, &tid_head, &tid_tail,
8343 SCB_GET_TARGET(ahd, scb));
8344 /*
8345 * Check any MK_MESSAGE SCB that is still waiting to
8346 * enter this target's waiting for selection queue.
8347 */
8348 if (mk_msg_scb != NULL
8349 && ahd_match_scb(ahd, mk_msg_scb, target, channel,
8350 lun, tag, role)) {
8351
8352 /*
8353 * We found an scb that needs to be acted on.
8354 */
8355 found++;
8356 switch (action) {
8357 case SEARCH_COMPLETE:
8358 if ((mk_msg_scb->flags & SCB_ACTIVE) == 0)
8359 printf("Inactive SCB pending MK_MSG\n");
8360 ahd_done_with_status(ahd, mk_msg_scb, status);
8361 /* FALLTHROUGH */
8362 case SEARCH_REMOVE:
8363 {
8364 u_int tail_offset;
8365
8366 printf("Removing MK_MSG scb\n");
8367
8368 /*
8369 * Reset our tail to the tail of the
8370 * main per-target list.
8371 */
8372 tail_offset = WAITING_SCB_TAILS
8373 + (2 * SCB_GET_TARGET(ahd, mk_msg_scb));
8374 ahd_outw(ahd, tail_offset, tid_tail);
8375
8376 seq_flags2 &= ~PENDING_MK_MESSAGE;
8377 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
8378 ahd_outw(ahd, CMDS_PENDING,
8379 ahd_inw(ahd, CMDS_PENDING)-1);
8380 mk_msg_scb = NULL;
8381 break;
8382 }
8383 case SEARCH_PRINT:
8384 printf(" 0x%x", SCB_GET_TAG(scb));
8385 /* FALLTHROUGH */
8386 case SEARCH_COUNT:
8387 break;
8388 }
8389 }
8390
8391 if (mk_msg_scb != NULL
8392 && SCBID_IS_NULL(tid_head)
8393 && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
8394 SCB_LIST_NULL, ROLE_UNKNOWN)) {
8395
8396 /*
8397 * When removing the last SCB for a target
8398 * queue with a pending MK_MESSAGE scb, we
8399 * must queue the MK_MESSAGE scb.
8400 */
8401 printf("Queueing mk_msg_scb\n");
8402 tid_head = ahd_inw(ahd, MK_MESSAGE_SCB);
8403 seq_flags2 &= ~PENDING_MK_MESSAGE;
8404 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
8405 mk_msg_scb = NULL;
8406 }
8407 if (tid_head != scbid)
8408 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next);
8409 if (!SCBID_IS_NULL(tid_head))
8410 tid_prev = tid_head;
8411 if (action == SEARCH_PRINT)
8412 printf(")\n");
8413 }
8414
8415 /* Restore saved state. */
8416 ahd_set_scbptr(ahd, savedscbptr);
8417 ahd_restore_modes(ahd, saved_modes);
8418 return (found);
8419 }
8420
8421 static int
8422 ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel,
8423 int lun, u_int tag, role_t role, uint32_t status,
8424 ahd_search_action action, u_int *list_head,
8425 u_int *list_tail, u_int tid)
8426 {
8427 struct scb *scb;
8428 u_int scbid;
8429 u_int next;
8430 u_int prev;
8431 int found;
8432
8433 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
8434 found = 0;
8435 prev = SCB_LIST_NULL;
8436 next = *list_head;
8437 *list_tail = SCB_LIST_NULL;
8438 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) {
8439 if (scbid >= ahd->scb_data.numscbs) {
8440 printf("%s:SCB List inconsistency. "
8441 "SCB == 0x%x, yet numscbs == 0x%x.",
8442 ahd_name(ahd), scbid, ahd->scb_data.numscbs);
8443 ahd_dump_card_state(ahd);
8444 panic("for safety");
8445 }
8446 scb = ahd_lookup_scb(ahd, scbid);
8447 if (scb == NULL) {
8448 printf("%s: SCB = %d Not Active!\n",
8449 ahd_name(ahd), scbid);
8450 panic("Waiting List traversal\n");
8451 }
8452 ahd_set_scbptr(ahd, scbid);
8453 *list_tail = scbid;
8454 next = ahd_inw_scbram(ahd, SCB_NEXT);
8455 if (ahd_match_scb(ahd, scb, target, channel,
8456 lun, SCB_LIST_NULL, role) == 0) {
8457 prev = scbid;
8458 continue;
8459 }
8460 found++;
8461 switch (action) {
8462 case SEARCH_COMPLETE:
8463 if ((scb->flags & SCB_ACTIVE) == 0)
8464 printf("Inactive SCB in Waiting List\n");
8465 ahd_done_with_status(ahd, scb, status);
8466 /* FALLTHROUGH */
8467 case SEARCH_REMOVE:
8468 ahd_rem_wscb(ahd, scbid, prev, next, tid);
8469 *list_tail = prev;
8470 if (SCBID_IS_NULL(prev))
8471 *list_head = next;
8472 break;
8473 case SEARCH_PRINT:
8474 printf("0x%x ", scbid);
8475 case SEARCH_COUNT:
8476 prev = scbid;
8477 break;
8478 }
8479 if (found > AHD_SCB_MAX)
8480 panic("SCB LIST LOOP");
8481 }
8482 if (action == SEARCH_COMPLETE
8483 || action == SEARCH_REMOVE)
8484 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found);
8485 return (found);
8486 }
8487
8488 static void
8489 ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev,
8490 u_int tid_cur, u_int tid_next)
8491 {
8492 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
8493
8494 if (SCBID_IS_NULL(tid_cur)) {
8495
8496 /* Bypass current TID list */
8497 if (SCBID_IS_NULL(tid_prev)) {
8498 ahd_outw(ahd, WAITING_TID_HEAD, tid_next);
8499 } else {
8500 ahd_set_scbptr(ahd, tid_prev);
8501 ahd_outw(ahd, SCB_NEXT2, tid_next);
8502 }
8503 if (SCBID_IS_NULL(tid_next))
8504 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev);
8505 } else {
8506
8507 /* Stitch through tid_cur */
8508 if (SCBID_IS_NULL(tid_prev)) {
8509 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur);
8510 } else {
8511 ahd_set_scbptr(ahd, tid_prev);
8512 ahd_outw(ahd, SCB_NEXT2, tid_cur);
8513 }
8514 ahd_set_scbptr(ahd, tid_cur);
8515 ahd_outw(ahd, SCB_NEXT2, tid_next);
8516
8517 if (SCBID_IS_NULL(tid_next))
8518 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur);
8519 }
8520 }
8521
8522 /*
8523 * Manipulate the waiting for selection list and return the
8524 * scb that follows the one that we remove.
8525 */
8526 static u_int
8527 ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
8528 u_int prev, u_int next, u_int tid)
8529 {
8530 u_int tail_offset;
8531
8532 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
8533 if (!SCBID_IS_NULL(prev)) {
8534 ahd_set_scbptr(ahd, prev);
8535 ahd_outw(ahd, SCB_NEXT, next);
8536 }
8537
8538 /*
8539 * SCBs that have MK_MESSAGE set in them may
8540 * cause the tail pointer to be updated without
8541 * setting the next pointer of the previous tail.
8542 * Only clear the tail if the removed SCB was
8543 * the tail.
8544 */
8545 tail_offset = WAITING_SCB_TAILS + (2 * tid);
8546 if (SCBID_IS_NULL(next)
8547 && ahd_inw(ahd, tail_offset) == scbid)
8548 ahd_outw(ahd, tail_offset, prev);
8549
8550 ahd_add_scb_to_free_list(ahd, scbid);
8551 return (next);
8552 }
8553
8554 /*
8555 * Add the SCB as selected by SCBPTR onto the on chip list of
8556 * free hardware SCBs. This list is empty/unused if we are not
8557 * performing SCB paging.
8558 */
8559 static void
8560 ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid)
8561 {
8562 /* XXX Need some other mechanism to designate "free". */
8563 /*
8564 * Invalidate the tag so that our abort
8565 * routines don't think it's active.
8566 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL);
8567 */
8568 }
8569
8570 /******************************** Error Handling ******************************/
8571 /*
8572 * Abort all SCBs that match the given description (target/channel/lun/tag),
8573 * setting their status to the passed in status if the status has not already
8574 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer
8575 * is paused before it is called.
8576 */
8577 static int
8578 ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel,
8579 int lun, u_int tag, role_t role, uint32_t status)
8580 {
8581 struct scb *scbp;
8582 struct scb *scbp_next;
8583 u_int i, j;
8584 u_int maxtarget;
8585 u_int minlun;
8586 u_int maxlun;
8587 int found;
8588 ahd_mode_state saved_modes;
8589
8590 /* restore this when we're done */
8591 saved_modes = ahd_save_modes(ahd);
8592 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
8593
8594 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL,
8595 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE);
8596
8597 /*
8598 * Clean out the busy target table for any untagged commands.
8599 */
8600 i = 0;
8601 maxtarget = 16;
8602 if (target != CAM_TARGET_WILDCARD) {
8603 i = target;
8604 if (channel == 'B')
8605 i += 8;
8606 maxtarget = i + 1;
8607 }
8608
8609 if (lun == CAM_LUN_WILDCARD) {
8610 minlun = 0;
8611 maxlun = AHD_NUM_LUNS_NONPKT;
8612 } else if (lun >= AHD_NUM_LUNS_NONPKT) {
8613 minlun = maxlun = 0;
8614 } else {
8615 minlun = lun;
8616 maxlun = lun + 1;
8617 }
8618
8619 if (role != ROLE_TARGET) {
8620 for (;i < maxtarget; i++) {
8621 for (j = minlun;j < maxlun; j++) {
8622 u_int scbid;
8623 u_int tcl;
8624
8625 tcl = BUILD_TCL_RAW(i, 'A', j);
8626 scbid = ahd_find_busy_tcl(ahd, tcl);
8627 scbp = ahd_lookup_scb(ahd, scbid);
8628 if (scbp == NULL
8629 || ahd_match_scb(ahd, scbp, target, channel,
8630 lun, tag, role) == 0)
8631 continue;
8632 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j));
8633 }
8634 }
8635 }
8636
8637 /*
8638 * Don't abort commands that have already completed,
8639 * but haven't quite made it up to the host yet.
8640 */
8641 ahd_flush_qoutfifo(ahd);
8642
8643 /*
8644 * Go through the pending CCB list and look for
8645 * commands for this target that are still active.
8646 * These are other tagged commands that were
8647 * disconnected when the reset occurred.
8648 */
8649 scbp_next = LIST_FIRST(&ahd->pending_scbs);
8650 while (scbp_next != NULL) {
8651 scbp = scbp_next;
8652 scbp_next = LIST_NEXT(scbp, pending_links);
8653 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) {
8654 cam_status ostat;
8655
8656 ostat = ahd_get_transaction_status(scbp);
8657 if (ostat == CAM_REQ_INPROG)
8658 ahd_set_transaction_status(scbp, status);
8659 if (ahd_get_transaction_status(scbp) != CAM_REQ_CMP)
8660 ahd_freeze_scb(scbp);
8661 if ((scbp->flags & SCB_ACTIVE) == 0)
8662 printf("Inactive SCB on pending list\n");
8663 ahd_done(ahd, scbp);
8664 found++;
8665 }
8666 }
8667 ahd_restore_modes(ahd, saved_modes);
8668 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status);
8669 ahd->flags |= AHD_UPDATE_PEND_CMDS;
8670 return found;
8671 }
8672
8673 static void
8674 ahd_reset_current_bus(struct ahd_softc *ahd)
8675 {
8676 uint8_t scsiseq;
8677
8678 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
8679 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST);
8680 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO);
8681 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO);
8682 ahd_flush_device_writes(ahd);
8683 ahd_delay(AHD_BUSRESET_DELAY);
8684 /* Turn off the bus reset */
8685 ahd_outb(ahd, SCSISEQ0, scsiseq);
8686 ahd_flush_device_writes(ahd);
8687 ahd_delay(AHD_BUSRESET_DELAY);
8688 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) {
8689 /*
8690 * 2A Razor #474
8691 * Certain chip state is not cleared for
8692 * SCSI bus resets that we initiate, so
8693 * we must reset the chip.
8694 */
8695 ahd_reset(ahd, /*reinit*/TRUE);
8696 ahd_intr_enable(ahd, /*enable*/TRUE);
8697 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
8698 }
8699
8700 ahd_clear_intstat(ahd);
8701 }
8702
8703 int
8704 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
8705 {
8706 struct ahd_devinfo caminfo;
8707 u_int initiator;
8708 u_int target;
8709 u_int max_scsiid;
8710 int found;
8711 u_int fifo;
8712 u_int next_fifo;
8713 uint8_t scsiseq;
8714
8715 /*
8716 * Check if the last bus reset is cleared
8717 */
8718 if (ahd->flags & AHD_BUS_RESET_ACTIVE) {
8719 printf("%s: bus reset still active\n",
8720 ahd_name(ahd));
8721 return 0;
8722 }
8723 ahd->flags |= AHD_BUS_RESET_ACTIVE;
8724
8725 ahd->pending_device = NULL;
8726
8727 ahd_compile_devinfo(&caminfo,
8728 CAM_TARGET_WILDCARD,
8729 CAM_TARGET_WILDCARD,
8730 CAM_LUN_WILDCARD,
8731 channel, ROLE_UNKNOWN);
8732 ahd_pause(ahd);
8733
8734 /* Make sure the sequencer is in a safe location. */
8735 ahd_clear_critical_section(ahd);
8736
8737 /*
8738 * Run our command complete fifos to ensure that we perform
8739 * completion processing on any commands that 'completed'
8740 * before the reset occurred.
8741 */
8742 ahd_run_qoutfifo(ahd);
8743 #ifdef AHD_TARGET_MODE
8744 if ((ahd->flags & AHD_TARGETROLE) != 0) {
8745 ahd_run_tqinfifo(ahd, /*paused*/TRUE);
8746 }
8747 #endif
8748 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
8749
8750 /*
8751 * Disable selections so no automatic hardware
8752 * functions will modify chip state.
8753 */
8754 ahd_outb(ahd, SCSISEQ0, 0);
8755 ahd_outb(ahd, SCSISEQ1, 0);
8756
8757 /*
8758 * Safely shut down our DMA engines. Always start with
8759 * the FIFO that is not currently active (if any are
8760 * actively connected).
8761 */
8762 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
8763 if (next_fifo > CURRFIFO_1)
8764 /* If disconneced, arbitrarily start with FIFO1. */
8765 next_fifo = fifo = 0;
8766 do {
8767 next_fifo ^= CURRFIFO_1;
8768 ahd_set_modes(ahd, next_fifo, next_fifo);
8769 ahd_outb(ahd, DFCNTRL,
8770 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN));
8771 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0)
8772 ahd_delay(10);
8773 /*
8774 * Set CURRFIFO to the now inactive channel.
8775 */
8776 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
8777 ahd_outb(ahd, DFFSTAT, next_fifo);
8778 } while (next_fifo != fifo);
8779
8780 /*
8781 * Reset the bus if we are initiating this reset
8782 */
8783 ahd_clear_msg_state(ahd);
8784 ahd_outb(ahd, SIMODE1,
8785 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST));
8786
8787 if (initiate_reset)
8788 ahd_reset_current_bus(ahd);
8789
8790 ahd_clear_intstat(ahd);
8791
8792 /*
8793 * Clean up all the state information for the
8794 * pending transactions on this bus.
8795 */
8796 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel,
8797 CAM_LUN_WILDCARD, SCB_LIST_NULL,
8798 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET);
8799
8800 /*
8801 * Cleanup anything left in the FIFOs.
8802 */
8803 ahd_clear_fifo(ahd, 0);
8804 ahd_clear_fifo(ahd, 1);
8805
8806 /*
8807 * Clear SCSI interrupt status
8808 */
8809 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
8810
8811 /*
8812 * Reenable selections
8813 */
8814 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST);
8815 scsiseq = ahd_inb(ahd, SCSISEQ_TEMPLATE);
8816 ahd_outb(ahd, SCSISEQ1, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));
8817
8818 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7;
8819 #ifdef AHD_TARGET_MODE
8820 /*
8821 * Send an immediate notify ccb to all target more peripheral
8822 * drivers affected by this action.
8823 */
8824 for (target = 0; target <= max_scsiid; target++) {
8825 struct ahd_tmode_tstate* tstate;
8826 u_int lun;
8827
8828 tstate = ahd->enabled_targets[target];
8829 if (tstate == NULL)
8830 continue;
8831 for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
8832 struct ahd_tmode_lstate* lstate;
8833
8834 lstate = tstate->enabled_luns[lun];
8835 if (lstate == NULL)
8836 continue;
8837
8838 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD,
8839 EVENT_TYPE_BUS_RESET, /*arg*/0);
8840 ahd_send_lstate_events(ahd, lstate);
8841 }
8842 }
8843 #endif
8844 /*
8845 * Revert to async/narrow transfers until we renegotiate.
8846 */
8847 for (target = 0; target <= max_scsiid; target++) {
8848
8849 if (ahd->enabled_targets[target] == NULL)
8850 continue;
8851 for (initiator = 0; initiator <= max_scsiid; initiator++) {
8852 struct ahd_devinfo devinfo;
8853
8854 ahd_compile_devinfo(&devinfo, target, initiator,
8855 CAM_LUN_WILDCARD,
8856 'A', ROLE_UNKNOWN);
8857 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
8858 AHD_TRANS_CUR, /*paused*/TRUE);
8859 ahd_set_syncrate(ahd, &devinfo, /*period*/0,
8860 /*offset*/0, /*ppr_options*/0,
8861 AHD_TRANS_CUR, /*paused*/TRUE);
8862 }
8863 }
8864
8865 /* Notify the XPT that a bus reset occurred */
8866 ahd_send_async(ahd, caminfo.channel, CAM_TARGET_WILDCARD,
8867 CAM_LUN_WILDCARD, AC_BUS_RESET);
8868
8869 ahd_restart(ahd);
8870
8871 return (found);
8872 }
8873
8874 /**************************** Statistics Processing ***************************/
8875 static void
8876 ahd_stat_timer(void *arg)
8877 {
8878 struct ahd_softc *ahd = arg;
8879 u_long s;
8880 int enint_coal;
8881
8882 ahd_lock(ahd, &s);
8883
8884 enint_coal = ahd->hs_mailbox & ENINT_COALESCE;
8885 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold)
8886 enint_coal |= ENINT_COALESCE;
8887 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold)
8888 enint_coal &= ~ENINT_COALESCE;
8889
8890 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) {
8891 ahd_enable_coalescing(ahd, enint_coal);
8892 #ifdef AHD_DEBUG
8893 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0)
8894 printf("%s: Interrupt coalescing "
8895 "now %sabled. Cmds %d\n",
8896 ahd_name(ahd),
8897 (enint_coal & ENINT_COALESCE) ? "en" : "dis",
8898 ahd->cmdcmplt_total);
8899 #endif
8900 }
8901
8902 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1);
8903 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket];
8904 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0;
8905 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US,
8906 ahd_stat_timer, ahd);
8907 ahd_unlock(ahd, &s);
8908 }
8909
8910 /****************************** Status Processing *****************************/
8911
8912 static void
8913 ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb)
8914 {
8915 struct hardware_scb *hscb;
8916 int paused;
8917
8918 /*
8919 * The sequencer freezes its select-out queue
8920 * anytime a SCSI status error occurs. We must
8921 * handle the error and increment our qfreeze count
8922 * to allow the sequencer to continue. We don't
8923 * bother clearing critical sections here since all
8924 * operations are on data structures that the sequencer
8925 * is not touching once the queue is frozen.
8926 */
8927 hscb = scb->hscb;
8928
8929 if (ahd_is_paused(ahd)) {
8930 paused = 1;
8931 } else {
8932 paused = 0;
8933 ahd_pause(ahd);
8934 }
8935
8936 /* Freeze the queue until the client sees the error. */
8937 ahd_freeze_devq(ahd, scb);
8938 ahd_freeze_scb(scb);
8939 ahd->qfreeze_cnt++;
8940 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);
8941
8942 if (paused == 0)
8943 ahd_unpause(ahd);
8944
8945 /* Don't want to clobber the original sense code */
8946 if ((scb->flags & SCB_SENSE) != 0) {
8947 /*
8948 * Clear the SCB_SENSE Flag and perform
8949 * a normal command completion.
8950 */
8951 scb->flags &= ~SCB_SENSE;
8952 ahd_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
8953 ahd_done(ahd, scb);
8954 return;
8955 }
8956 ahd_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR);
8957 ahd_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status);
8958 switch (hscb->shared_data.istatus.scsi_status) {
8959 case STATUS_PKT_SENSE:
8960 {
8961 struct scsi_status_iu_header *siu;
8962
8963 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD);
8964 siu = (struct scsi_status_iu_header *)scb->sense_data;
8965 ahd_set_scsi_status(scb, siu->status);
8966 #ifdef AHD_DEBUG
8967 if ((ahd_debug & AHD_SHOW_SENSE) != 0) {
8968 ahd_print_path(ahd, scb);
8969 printf("SCB 0x%x Received PKT Status of 0x%x\n",
8970 SCB_GET_TAG(scb), siu->status);
8971 printf("\tflags = 0x%x, sense len = 0x%x, "
8972 "pktfail = 0x%x\n",
8973 siu->flags, scsi_4btoul(siu->sense_length),
8974 scsi_4btoul(siu->pkt_failures_length));
8975 }
8976 #endif
8977 if ((siu->flags & SIU_RSPVALID) != 0) {
8978 ahd_print_path(ahd, scb);
8979 if (scsi_4btoul(siu->pkt_failures_length) < 4) {
8980 printf("Unable to parse pkt_failures\n");
8981 } else {
8982
8983 switch (SIU_PKTFAIL_CODE(siu)) {
8984 case SIU_PFC_NONE:
8985 printf("No packet failure found\n");
8986 break;
8987 case SIU_PFC_CIU_FIELDS_INVALID:
8988 printf("Invalid Command IU Field\n");
8989 break;
8990 case SIU_PFC_TMF_NOT_SUPPORTED:
8991 printf("TMF not supportd\n");
8992 break;
8993 case SIU_PFC_TMF_FAILED:
8994 printf("TMF failed\n");
8995 break;
8996 case SIU_PFC_INVALID_TYPE_CODE:
8997 printf("Invalid L_Q Type code\n");
8998 break;
8999 case SIU_PFC_ILLEGAL_REQUEST:
9000 printf("Illegal request\n");
9001 default:
9002 break;
9003 }
9004 }
9005 if (siu->status == SCSI_STATUS_OK)
9006 ahd_set_transaction_status(scb,
9007 CAM_REQ_CMP_ERR);
9008 }
9009 if ((siu->flags & SIU_SNSVALID) != 0) {
9010 scb->flags |= SCB_PKT_SENSE;
9011 #ifdef AHD_DEBUG
9012 if ((ahd_debug & AHD_SHOW_SENSE) != 0)
9013 printf("Sense data available\n");
9014 #endif
9015 }
9016 ahd_done(ahd, scb);
9017 break;
9018 }
9019 case SCSI_STATUS_CMD_TERMINATED:
9020 case SCSI_STATUS_CHECK_COND:
9021 {
9022 struct ahd_devinfo devinfo;
9023 struct ahd_dma_seg *sg;
9024 struct scsi_sense *sc;
9025 struct ahd_initiator_tinfo *targ_info;
9026 struct ahd_tmode_tstate *tstate;
9027 struct ahd_transinfo *tinfo;
9028 #ifdef AHD_DEBUG
9029 if (ahd_debug & AHD_SHOW_SENSE) {
9030 ahd_print_path(ahd, scb);
9031 printf("SCB %d: requests Check Status\n",
9032 SCB_GET_TAG(scb));
9033 }
9034 #endif
9035
9036 if (ahd_perform_autosense(scb) == 0)
9037 break;
9038
9039 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
9040 SCB_GET_TARGET(ahd, scb),
9041 SCB_GET_LUN(scb),
9042 SCB_GET_CHANNEL(ahd, scb),
9043 ROLE_INITIATOR);
9044 targ_info = ahd_fetch_transinfo(ahd,
9045 devinfo.channel,
9046 devinfo.our_scsiid,
9047 devinfo.target,
9048 &tstate);
9049 tinfo = &targ_info->curr;
9050 sg = scb->sg_list;
9051 sc = (struct scsi_sense *)hscb->shared_data.idata.cdb;
9052 /*
9053 * Save off the residual if there is one.
9054 */
9055 ahd_update_residual(ahd, scb);
9056 #ifdef AHD_DEBUG
9057 if (ahd_debug & AHD_SHOW_SENSE) {
9058 ahd_print_path(ahd, scb);
9059 printf("Sending Sense\n");
9060 }
9061 #endif
9062 scb->sg_count = 0;
9063 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb),
9064 ahd_get_sense_bufsize(ahd, scb),
9065 /*last*/TRUE);
9066 sc->opcode = REQUEST_SENSE;
9067 sc->byte2 = 0;
9068 if (tinfo->protocol_version <= SCSI_REV_2
9069 && SCB_GET_LUN(scb) < 8)
9070 sc->byte2 = SCB_GET_LUN(scb) << 5;
9071 sc->unused[0] = 0;
9072 sc->unused[1] = 0;
9073 sc->length = ahd_get_sense_bufsize(ahd, scb);
9074 sc->control = 0;
9075
9076 /*
9077 * We can't allow the target to disconnect.
9078 * This will be an untagged transaction and
9079 * having the target disconnect will make this
9080 * transaction indestinguishable from outstanding
9081 * tagged transactions.
9082 */
9083 hscb->control = 0;
9084
9085 /*
9086 * This request sense could be because the
9087 * the device lost power or in some other
9088 * way has lost our transfer negotiations.
9089 * Renegotiate if appropriate. Unit attention
9090 * errors will be reported before any data
9091 * phases occur.
9092 */
9093 if (ahd_get_residual(scb) == ahd_get_transfer_length(scb)) {
9094 ahd_update_neg_request(ahd, &devinfo,
9095 tstate, targ_info,
9096 AHD_NEG_IF_NON_ASYNC);
9097 }
9098 if (tstate->auto_negotiate & devinfo.target_mask) {
9099 hscb->control |= MK_MESSAGE;
9100 scb->flags &=
9101 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET);
9102 scb->flags |= SCB_AUTO_NEGOTIATE;
9103 }
9104 hscb->cdb_len = sizeof(*sc);
9105 ahd_setup_data_scb(ahd, scb);
9106 scb->flags |= SCB_SENSE;
9107 ahd_queue_scb(ahd, scb);
9108 break;
9109 }
9110 case SCSI_STATUS_OK:
9111 printf("%s: Interrupted for staus of 0???\n",
9112 ahd_name(ahd));
9113 /* FALLTHROUGH */
9114 default:
9115 ahd_done(ahd, scb);
9116 break;
9117 }
9118 }
9119
9120 static void
9121 ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb)
9122 {
9123 if (scb->hscb->shared_data.istatus.scsi_status != 0) {
9124 ahd_handle_scsi_status(ahd, scb);
9125 } else {
9126 ahd_calc_residual(ahd, scb);
9127 ahd_done(ahd, scb);
9128 }
9129 }
9130
9131 /*
9132 * Calculate the residual for a just completed SCB.
9133 */
9134 static void
9135 ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb)
9136 {
9137 struct hardware_scb *hscb;
9138 struct initiator_status *spkt;
9139 uint32_t sgptr;
9140 uint32_t resid_sgptr;
9141 uint32_t resid;
9142
9143 /*
9144 * 5 cases.
9145 * 1) No residual.
9146 * SG_STATUS_VALID clear in sgptr.
9147 * 2) Transferless command
9148 * 3) Never performed any transfers.
9149 * sgptr has SG_FULL_RESID set.
9150 * 4) No residual but target did not
9151 * save data pointers after the
9152 * last transfer, so sgptr was
9153 * never updated.
9154 * 5) We have a partial residual.
9155 * Use residual_sgptr to determine
9156 * where we are.
9157 */
9158
9159 hscb = scb->hscb;
9160 sgptr = ahd_le32toh(hscb->sgptr);
9161 if ((sgptr & SG_STATUS_VALID) == 0)
9162 /* Case 1 */
9163 return;
9164 sgptr &= ~SG_STATUS_VALID;
9165
9166 if ((sgptr & SG_LIST_NULL) != 0)
9167 /* Case 2 */
9168 return;
9169
9170 /*
9171 * Residual fields are the same in both
9172 * target and initiator status packets,
9173 * so we can always use the initiator fields
9174 * regardless of the role for this SCB.
9175 */
9176 spkt = &hscb->shared_data.istatus;
9177 resid_sgptr = ahd_le32toh(spkt->residual_sgptr);
9178 if ((sgptr & SG_FULL_RESID) != 0) {
9179 /* Case 3 */
9180 resid = ahd_get_transfer_length(scb);
9181 } else if ((resid_sgptr & SG_LIST_NULL) != 0) {
9182 /* Case 4 */
9183 return;
9184 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) {
9185 ahd_print_path(ahd, scb);
9186 printf("data overrun detected Tag == 0x%x.\n",
9187 SCB_GET_TAG(scb));
9188 ahd_freeze_devq(ahd, scb);
9189 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
9190 ahd_freeze_scb(scb);
9191 return;
9192 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) {
9193 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr);
9194 /* NOTREACHED */
9195 } else {
9196 struct ahd_dma_seg *sg;
9197
9198 /*
9199 * Remainder of the SG where the transfer
9200 * stopped.
9201 */
9202 resid = ahd_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK;
9203 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK);
9204
9205 /* The residual sg_ptr always points to the next sg */
9206 sg--;
9207
9208 /*
9209 * Add up the contents of all residual
9210 * SG segments that are after the SG where
9211 * the transfer stopped.
9212 */
9213 while ((ahd_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) {
9214 sg++;
9215 resid += ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
9216 }
9217 }
9218 if ((scb->flags & SCB_SENSE) == 0)
9219 ahd_set_residual(scb, resid);
9220 else
9221 ahd_set_sense_residual(scb, resid);
9222
9223 #ifdef AHD_DEBUG
9224 if ((ahd_debug & AHD_SHOW_MISC) != 0) {
9225 ahd_print_path(ahd, scb);
9226 printf("Handled %sResidual of %d bytes\n",
9227 (scb->flags & SCB_SENSE) ? "Sense " : "", resid);
9228 }
9229 #endif
9230 }
9231
9232 /******************************* Target Mode **********************************/
9233 #ifdef AHD_TARGET_MODE
9234 /*
9235 * Add a target mode event to this lun's queue
9236 */
9237 static void
9238 ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate,
9239 u_int initiator_id, u_int event_type, u_int event_arg)
9240 {
9241 struct ahd_tmode_event *event;
9242 int pending;
9243
9244 xpt_freeze_devq(lstate->path, /*count*/1);
9245 if (lstate->event_w_idx >= lstate->event_r_idx)
9246 pending = lstate->event_w_idx - lstate->event_r_idx;
9247 else
9248 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1
9249 - (lstate->event_r_idx - lstate->event_w_idx);
9250
9251 if (event_type == EVENT_TYPE_BUS_RESET
9252 || event_type == MSG_BUS_DEV_RESET) {
9253 /*
9254 * Any earlier events are irrelevant, so reset our buffer.
9255 * This has the effect of allowing us to deal with reset
9256 * floods (an external device holding down the reset line)
9257 * without losing the event that is really interesting.
9258 */
9259 lstate->event_r_idx = 0;
9260 lstate->event_w_idx = 0;
9261 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE);
9262 }
9263
9264 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) {
9265 xpt_print_path(lstate->path);
9266 printf("immediate event %x:%x lost\n",
9267 lstate->event_buffer[lstate->event_r_idx].event_type,
9268 lstate->event_buffer[lstate->event_r_idx].event_arg);
9269 lstate->event_r_idx++;
9270 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
9271 lstate->event_r_idx = 0;
9272 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE);
9273 }
9274
9275 event = &lstate->event_buffer[lstate->event_w_idx];
9276 event->initiator_id = initiator_id;
9277 event->event_type = event_type;
9278 event->event_arg = event_arg;
9279 lstate->event_w_idx++;
9280 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
9281 lstate->event_w_idx = 0;
9282 }
9283
9284 /*
9285 * Send any target mode events queued up waiting
9286 * for immediate notify resources.
9287 */
9288 void
9289 ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate)
9290 {
9291 struct ccb_hdr *ccbh;
9292 struct ccb_immed_notify *inot;
9293
9294 while (lstate->event_r_idx != lstate->event_w_idx
9295 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) {
9296 struct ahd_tmode_event *event;
9297
9298 event = &lstate->event_buffer[lstate->event_r_idx];
9299 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle);
9300 inot = (struct ccb_immed_notify *)ccbh;
9301 switch (event->event_type) {
9302 case EVENT_TYPE_BUS_RESET:
9303 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN;
9304 break;
9305 default:
9306 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
9307 inot->message_args[0] = event->event_type;
9308 inot->message_args[1] = event->event_arg;
9309 break;
9310 }
9311 inot->initiator_id = event->initiator_id;
9312 inot->sense_len = 0;
9313 xpt_done((union ccb *)inot);
9314 lstate->event_r_idx++;
9315 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
9316 lstate->event_r_idx = 0;
9317 }
9318 }
9319 #endif
9320
9321 /******************** Sequencer Program Patching/Download *********************/
9322
9323 #ifdef AHD_DUMP_SEQ
9324 void
9325 ahd_dumpseq(struct ahd_softc* ahd)
9326 {
9327 int i;
9328 int max_prog;
9329
9330 max_prog = 2048;
9331
9332 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
9333 ahd_outw(ahd, PRGMCNT, 0);
9334 for (i = 0; i < max_prog; i++) {
9335 uint8_t ins_bytes[4];
9336
9337 ahd_insb(ahd, SEQRAM, ins_bytes, 4);
9338 printf("0x%08x\n", ins_bytes[0] << 24
9339 | ins_bytes[1] << 16
9340 | ins_bytes[2] << 8
9341 | ins_bytes[3]);
9342 }
9343 }
9344 #endif
9345
9346 static void
9347 ahd_loadseq(struct ahd_softc *ahd)
9348 {
9349 struct cs cs_table[num_critical_sections];
9350 u_int begin_set[num_critical_sections];
9351 u_int end_set[num_critical_sections];
9352 const struct patch *cur_patch;
9353 u_int cs_count;
9354 u_int cur_cs;
9355 u_int i;
9356 int downloaded;
9357 u_int skip_addr;
9358 u_int sg_prefetch_cnt;
9359 u_int sg_prefetch_cnt_limit;
9360 u_int sg_prefetch_align;
9361 u_int sg_size;
9362 u_int cacheline_mask;
9363 uint8_t download_consts[DOWNLOAD_CONST_COUNT];
9364
9365 if (bootverbose)
9366 printf("%s: Downloading Sequencer Program...",
9367 ahd_name(ahd));
9368
9369 #if DOWNLOAD_CONST_COUNT != 8
9370 #error "Download Const Mismatch"
9371 #endif
9372 /*
9373 * Start out with 0 critical sections
9374 * that apply to this firmware load.
9375 */
9376 cs_count = 0;
9377 cur_cs = 0;
9378 memset(begin_set, 0, sizeof(begin_set));
9379 memset(end_set, 0, sizeof(end_set));
9380
9381 /*
9382 * Setup downloadable constant table.
9383 *
9384 * The computation for the S/G prefetch variables is
9385 * a bit complicated. We would like to always fetch
9386 * in terms of cachelined sized increments. However,
9387 * if the cacheline is not an even multiple of the
9388 * SG element size or is larger than our SG RAM, using
9389 * just the cache size might leave us with only a portion
9390 * of an SG element at the tail of a prefetch. If the
9391 * cacheline is larger than our S/G prefetch buffer less
9392 * the size of an SG element, we may round down to a cacheline
9393 * that doesn't contain any or all of the S/G of interest
9394 * within the bounds of our S/G ram. Provide variables to
9395 * the sequencer that will allow it to handle these edge
9396 * cases.
9397 */
9398 /* Start by aligning to the nearest cacheline. */
9399 sg_prefetch_align = ahd->pci_cachesize;
9400 if (sg_prefetch_align == 0)
9401 sg_prefetch_align = 8;
9402 /* Round down to the nearest power of 2. */
9403 while (powerof2(sg_prefetch_align) == 0)
9404 sg_prefetch_align--;
9405
9406 cacheline_mask = sg_prefetch_align - 1;
9407
9408 /*
9409 * If the cacheline boundary is greater than half our prefetch RAM
9410 * we risk not being able to fetch even a single complete S/G
9411 * segment if we align to that boundary.
9412 */
9413 if (sg_prefetch_align > CCSGADDR_MAX/2)
9414 sg_prefetch_align = CCSGADDR_MAX/2;
9415 /* Start by fetching a single cacheline. */
9416 sg_prefetch_cnt = sg_prefetch_align;
9417 /*
9418 * Increment the prefetch count by cachelines until
9419 * at least one S/G element will fit.
9420 */
9421 sg_size = sizeof(struct ahd_dma_seg);
9422 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
9423 sg_size = sizeof(struct ahd_dma64_seg);
9424 while (sg_prefetch_cnt < sg_size)
9425 sg_prefetch_cnt += sg_prefetch_align;
9426 /*
9427 * If the cacheline is not an even multiple of
9428 * the S/G size, we may only get a partial S/G when
9429 * we align. Add a cacheline if this is the case.
9430 */
9431 if ((sg_prefetch_align % sg_size) != 0
9432 && (sg_prefetch_cnt < CCSGADDR_MAX))
9433 sg_prefetch_cnt += sg_prefetch_align;
9434 /*
9435 * Lastly, compute a value that the sequencer can use
9436 * to determine if the remainder of the CCSGRAM buffer
9437 * has a full S/G element in it.
9438 */
9439 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1);
9440 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt;
9441 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit;
9442 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1);
9443 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1);
9444 download_consts[SG_SIZEOF] = sg_size;
9445 download_consts[PKT_OVERRUN_BUFOFFSET] =
9446 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256;
9447 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN;
9448 download_consts[CACHELINE_MASK] = cacheline_mask;
9449 cur_patch = patches;
9450 downloaded = 0;
9451 skip_addr = 0;
9452 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
9453 ahd_outw(ahd, PRGMCNT, 0);
9454
9455 for (i = 0; i < sizeof(seqprog)/4; i++) {
9456 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) {
9457 /*
9458 * Don't download this instruction as it
9459 * is in a patch that was removed.
9460 */
9461 continue;
9462 }
9463 /*
9464 * Move through the CS table until we find a CS
9465 * that might apply to this instruction.
9466 */
9467 for (; cur_cs < num_critical_sections; cur_cs++) {
9468 if (critical_sections[cur_cs].end <= i) {
9469 if (begin_set[cs_count] == TRUE
9470 && end_set[cs_count] == FALSE) {
9471 cs_table[cs_count].end = downloaded;
9472 end_set[cs_count] = TRUE;
9473 cs_count++;
9474 }
9475 continue;
9476 }
9477 if (critical_sections[cur_cs].begin <= i
9478 && begin_set[cs_count] == FALSE) {
9479 cs_table[cs_count].begin = downloaded;
9480 begin_set[cs_count] = TRUE;
9481 }
9482 break;
9483 }
9484 ahd_download_instr(ahd, i, download_consts);
9485 downloaded++;
9486 }
9487
9488 ahd->num_critical_sections = cs_count;
9489 if (cs_count != 0) {
9490
9491 cs_count *= sizeof(struct cs);
9492 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT);
9493 if (ahd->critical_sections == NULL)
9494 panic("ahd_loadseq: Could not malloc");
9495 memcpy(ahd->critical_sections, cs_table, cs_count);
9496 }
9497 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE);
9498
9499 if (bootverbose) {
9500 printf(" %d instructions downloaded\n", downloaded);
9501 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
9502 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags);
9503 }
9504 }
9505
9506 static int
9507 ahd_check_patch(struct ahd_softc *ahd, const struct patch **start_patch,
9508 u_int start_instr, u_int *skip_addr)
9509 {
9510 const struct patch *cur_patch;
9511 const struct patch *last_patch;
9512 u_int num_patches;
9513
9514 num_patches = ARRAY_SIZE(patches);
9515 last_patch = &patches[num_patches];
9516 cur_patch = *start_patch;
9517
9518 while (cur_patch < last_patch && start_instr == cur_patch->begin) {
9519
9520 if (cur_patch->patch_func(ahd) == 0) {
9521
9522 /* Start rejecting code */
9523 *skip_addr = start_instr + cur_patch->skip_instr;
9524 cur_patch += cur_patch->skip_patch;
9525 } else {
9526 /* Accepted this patch. Advance to the next
9527 * one and wait for our intruction pointer to
9528 * hit this point.
9529 */
9530 cur_patch++;
9531 }
9532 }
9533
9534 *start_patch = cur_patch;
9535 if (start_instr < *skip_addr)
9536 /* Still skipping */
9537 return (0);
9538
9539 return (1);
9540 }
9541
9542 static u_int
9543 ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address)
9544 {
9545 const struct patch *cur_patch;
9546 int address_offset;
9547 u_int skip_addr;
9548 u_int i;
9549
9550 address_offset = 0;
9551 cur_patch = patches;
9552 skip_addr = 0;
9553
9554 for (i = 0; i < address;) {
9555
9556 ahd_check_patch(ahd, &cur_patch, i, &skip_addr);
9557
9558 if (skip_addr > i) {
9559 int end_addr;
9560
9561 end_addr = min(address, skip_addr);
9562 address_offset += end_addr - i;
9563 i = skip_addr;
9564 } else {
9565 i++;
9566 }
9567 }
9568 return (address - address_offset);
9569 }
9570
9571 static void
9572 ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts)
9573 {
9574 union ins_formats instr;
9575 struct ins_format1 *fmt1_ins;
9576 struct ins_format3 *fmt3_ins;
9577 u_int opcode;
9578
9579 /*
9580 * The firmware is always compiled into a little endian format.
9581 */
9582 instr.integer = ahd_le32toh(*(uint32_t*)&seqprog[instrptr * 4]);
9583
9584 fmt1_ins = &instr.format1;
9585 fmt3_ins = NULL;
9586
9587 /* Pull the opcode */
9588 opcode = instr.format1.opcode;
9589 switch (opcode) {
9590 case AIC_OP_JMP:
9591 case AIC_OP_JC:
9592 case AIC_OP_JNC:
9593 case AIC_OP_CALL:
9594 case AIC_OP_JNE:
9595 case AIC_OP_JNZ:
9596 case AIC_OP_JE:
9597 case AIC_OP_JZ:
9598 {
9599 fmt3_ins = &instr.format3;
9600 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address);
9601 /* FALLTHROUGH */
9602 }
9603 case AIC_OP_OR:
9604 case AIC_OP_AND:
9605 case AIC_OP_XOR:
9606 case AIC_OP_ADD:
9607 case AIC_OP_ADC:
9608 case AIC_OP_BMOV:
9609 if (fmt1_ins->parity != 0) {
9610 fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
9611 }
9612 fmt1_ins->parity = 0;
9613 /* FALLTHROUGH */
9614 case AIC_OP_ROL:
9615 {
9616 int i, count;
9617
9618 /* Calculate odd parity for the instruction */
9619 for (i = 0, count = 0; i < 31; i++) {
9620 uint32_t mask;
9621
9622 mask = 0x01 << i;
9623 if ((instr.integer & mask) != 0)
9624 count++;
9625 }
9626 if ((count & 0x01) == 0)
9627 instr.format1.parity = 1;
9628
9629 /* The sequencer is a little endian cpu */
9630 instr.integer = ahd_htole32(instr.integer);
9631 ahd_outsb(ahd, SEQRAM, instr.bytes, 4);
9632 break;
9633 }
9634 default:
9635 panic("Unknown opcode encountered in seq program");
9636 break;
9637 }
9638 }
9639
9640 static int
9641 ahd_probe_stack_size(struct ahd_softc *ahd)
9642 {
9643 int last_probe;
9644
9645 last_probe = 0;
9646 while (1) {
9647 int i;
9648
9649 /*
9650 * We avoid using 0 as a pattern to avoid
9651 * confusion if the stack implementation
9652 * "back-fills" with zeros when "poping'
9653 * entries.
9654 */
9655 for (i = 1; i <= last_probe+1; i++) {
9656 ahd_outb(ahd, STACK, i & 0xFF);
9657 ahd_outb(ahd, STACK, (i >> 8) & 0xFF);
9658 }
9659
9660 /* Verify */
9661 for (i = last_probe+1; i > 0; i--) {
9662 u_int stack_entry;
9663
9664 stack_entry = ahd_inb(ahd, STACK)
9665 |(ahd_inb(ahd, STACK) << 8);
9666 if (stack_entry != i)
9667 goto sized;
9668 }
9669 last_probe++;
9670 }
9671 sized:
9672 return (last_probe);
9673 }
9674
9675 int
9676 ahd_print_register(const ahd_reg_parse_entry_t *table, u_int num_entries,
9677 const char *name, u_int address, u_int value,
9678 u_int *cur_column, u_int wrap_point)
9679 {
9680 int printed;
9681 u_int printed_mask;
9682
9683 if (cur_column != NULL && *cur_column >= wrap_point) {
9684 printf("\n");
9685 *cur_column = 0;
9686 }
9687 printed = printf("%s[0x%x]", name, value);
9688 if (table == NULL) {
9689 printed += printf(" ");
9690 *cur_column += printed;
9691 return (printed);
9692 }
9693 printed_mask = 0;
9694 while (printed_mask != 0xFF) {
9695 int entry;
9696
9697 for (entry = 0; entry < num_entries; entry++) {
9698 if (((value & table[entry].mask)
9699 != table[entry].value)
9700 || ((printed_mask & table[entry].mask)
9701 == table[entry].mask))
9702 continue;
9703
9704 printed += printf("%s%s",
9705 printed_mask == 0 ? ":(" : "|",
9706 table[entry].name);
9707 printed_mask |= table[entry].mask;
9708
9709 break;
9710 }
9711 if (entry >= num_entries)
9712 break;
9713 }
9714 if (printed_mask != 0)
9715 printed += printf(") ");
9716 else
9717 printed += printf(" ");
9718 if (cur_column != NULL)
9719 *cur_column += printed;
9720 return (printed);
9721 }
9722
9723 void
9724 ahd_dump_card_state(struct ahd_softc *ahd)
9725 {
9726 struct scb *scb;
9727 ahd_mode_state saved_modes;
9728 u_int dffstat;
9729 int paused;
9730 u_int scb_index;
9731 u_int saved_scb_index;
9732 u_int cur_col;
9733 int i;
9734
9735 if (ahd_is_paused(ahd)) {
9736 paused = 1;
9737 } else {
9738 paused = 0;
9739 ahd_pause(ahd);
9740 }
9741 saved_modes = ahd_save_modes(ahd);
9742 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
9743 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
9744 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n",
9745 ahd_name(ahd),
9746 ahd_inw(ahd, CURADDR),
9747 ahd_build_mode_state(ahd, ahd->saved_src_mode,
9748 ahd->saved_dst_mode));
9749 if (paused)
9750 printf("Card was paused\n");
9751
9752 if (ahd_check_cmdcmpltqueues(ahd))
9753 printf("Completions are pending\n");
9754
9755 /*
9756 * Mode independent registers.
9757 */
9758 cur_col = 0;
9759 ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50);
9760 ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50);
9761 ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50);
9762 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50);
9763 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50);
9764 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50);
9765 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50);
9766 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50);
9767 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50);
9768 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50);
9769 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50);
9770 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50);
9771 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50);
9772 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50);
9773 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50);
9774 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50);
9775 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50);
9776 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50);
9777 ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50);
9778 ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT),
9779 &cur_col, 50);
9780 ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50);
9781 ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID),
9782 &cur_col, 50);
9783 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50);
9784 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50);
9785 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50);
9786 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50);
9787 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50);
9788 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50);
9789 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50);
9790 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50);
9791 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50);
9792 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50);
9793 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50);
9794 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50);
9795 printf("\n");
9796 printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x "
9797 "CURRSCB 0x%x NEXTSCB 0x%x\n",
9798 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING),
9799 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB),
9800 ahd_inw(ahd, NEXTSCB));
9801 cur_col = 0;
9802 /* QINFIFO */
9803 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
9804 CAM_LUN_WILDCARD, SCB_LIST_NULL,
9805 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT);
9806 saved_scb_index = ahd_get_scbptr(ahd);
9807 printf("Pending list:");
9808 i = 0;
9809 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
9810 if (i++ > AHD_SCB_MAX)
9811 break;
9812 cur_col = printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb),
9813 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT));
9814 ahd_set_scbptr(ahd, SCB_GET_TAG(scb));
9815 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL),
9816 &cur_col, 60);
9817 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID),
9818 &cur_col, 60);
9819 }
9820 printf("\nTotal %d\n", i);
9821
9822 printf("Kernel Free SCB list: ");
9823 i = 0;
9824 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
9825 struct scb *list_scb;
9826
9827 list_scb = scb;
9828 do {
9829 printf("%d ", SCB_GET_TAG(list_scb));
9830 list_scb = LIST_NEXT(list_scb, collision_links);
9831 } while (list_scb && i++ < AHD_SCB_MAX);
9832 }
9833
9834 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
9835 if (i++ > AHD_SCB_MAX)
9836 break;
9837 printf("%d ", SCB_GET_TAG(scb));
9838 }
9839 printf("\n");
9840
9841 printf("Sequencer Complete DMA-inprog list: ");
9842 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD);
9843 i = 0;
9844 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
9845 ahd_set_scbptr(ahd, scb_index);
9846 printf("%d ", scb_index);
9847 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
9848 }
9849 printf("\n");
9850
9851 printf("Sequencer Complete list: ");
9852 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD);
9853 i = 0;
9854 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
9855 ahd_set_scbptr(ahd, scb_index);
9856 printf("%d ", scb_index);
9857 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
9858 }
9859 printf("\n");
9860
9861
9862 printf("Sequencer DMA-Up and Complete list: ");
9863 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
9864 i = 0;
9865 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
9866 ahd_set_scbptr(ahd, scb_index);
9867 printf("%d ", scb_index);
9868 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
9869 }
9870 printf("\n");
9871 printf("Sequencer On QFreeze and Complete list: ");
9872 scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD);
9873 i = 0;
9874 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
9875 ahd_set_scbptr(ahd, scb_index);
9876 printf("%d ", scb_index);
9877 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
9878 }
9879 printf("\n");
9880 ahd_set_scbptr(ahd, saved_scb_index);
9881 dffstat = ahd_inb(ahd, DFFSTAT);
9882 for (i = 0; i < 2; i++) {
9883 #ifdef AHD_DEBUG
9884 struct scb *fifo_scb;
9885 #endif
9886 u_int fifo_scbptr;
9887
9888 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
9889 fifo_scbptr = ahd_get_scbptr(ahd);
9890 printf("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
9891 ahd_name(ahd), i,
9892 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active",
9893 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr);
9894 cur_col = 0;
9895 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50);
9896 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50);
9897 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50);
9898 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50);
9899 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW),
9900 &cur_col, 50);
9901 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50);
9902 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50);
9903 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50);
9904 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50);
9905 if (cur_col > 50) {
9906 printf("\n");
9907 cur_col = 0;
9908 }
9909 cur_col += printf("SHADDR = 0x%x%x, SHCNT = 0x%x ",
9910 ahd_inl(ahd, SHADDR+4),
9911 ahd_inl(ahd, SHADDR),
9912 (ahd_inb(ahd, SHCNT)
9913 | (ahd_inb(ahd, SHCNT + 1) << 8)
9914 | (ahd_inb(ahd, SHCNT + 2) << 16)));
9915 if (cur_col > 50) {
9916 printf("\n");
9917 cur_col = 0;
9918 }
9919 cur_col += printf("HADDR = 0x%x%x, HCNT = 0x%x ",
9920 ahd_inl(ahd, HADDR+4),
9921 ahd_inl(ahd, HADDR),
9922 (ahd_inb(ahd, HCNT)
9923 | (ahd_inb(ahd, HCNT + 1) << 8)
9924 | (ahd_inb(ahd, HCNT + 2) << 16)));
9925 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50);
9926 #ifdef AHD_DEBUG
9927 if ((ahd_debug & AHD_SHOW_SG) != 0) {
9928 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr);
9929 if (fifo_scb != NULL)
9930 ahd_dump_sglist(fifo_scb);
9931 }
9932 #endif
9933 }
9934 printf("\nLQIN: ");
9935 for (i = 0; i < 20; i++)
9936 printf("0x%x ", ahd_inb(ahd, LQIN + i));
9937 printf("\n");
9938 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
9939 printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n",
9940 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE),
9941 ahd_inb(ahd, OPTIONMODE));
9942 printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n",
9943 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT),
9944 ahd_inb(ahd, MAXCMDCNT));
9945 printf("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n",
9946 ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID),
9947 ahd_inb(ahd, SAVED_LUN));
9948 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50);
9949 printf("\n");
9950 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
9951 cur_col = 0;
9952 ahd_ccscbctl_print(ahd_inb(ahd, CCSCBCTL), &cur_col, 50);
9953 printf("\n");
9954 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
9955 printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n",
9956 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX),
9957 ahd_inw(ahd, DINDEX));
9958 printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n",
9959 ahd_name(ahd), ahd_get_scbptr(ahd),
9960 ahd_inw_scbram(ahd, SCB_NEXT),
9961 ahd_inw_scbram(ahd, SCB_NEXT2));
9962 printf("CDB %x %x %x %x %x %x\n",
9963 ahd_inb_scbram(ahd, SCB_CDB_STORE),
9964 ahd_inb_scbram(ahd, SCB_CDB_STORE+1),
9965 ahd_inb_scbram(ahd, SCB_CDB_STORE+2),
9966 ahd_inb_scbram(ahd, SCB_CDB_STORE+3),
9967 ahd_inb_scbram(ahd, SCB_CDB_STORE+4),
9968 ahd_inb_scbram(ahd, SCB_CDB_STORE+5));
9969 printf("STACK:");
9970 for (i = 0; i < ahd->stack_size; i++) {
9971 ahd->saved_stack[i] =
9972 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8);
9973 printf(" 0x%x", ahd->saved_stack[i]);
9974 }
9975 for (i = ahd->stack_size-1; i >= 0; i--) {
9976 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF);
9977 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF);
9978 }
9979 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
9980 ahd_restore_modes(ahd, saved_modes);
9981 if (paused == 0)
9982 ahd_unpause(ahd);
9983 }
9984
9985 #if 0
9986 void
9987 ahd_dump_scbs(struct ahd_softc *ahd)
9988 {
9989 ahd_mode_state saved_modes;
9990 u_int saved_scb_index;
9991 int i;
9992
9993 saved_modes = ahd_save_modes(ahd);
9994 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
9995 saved_scb_index = ahd_get_scbptr(ahd);
9996 for (i = 0; i < AHD_SCB_MAX; i++) {
9997 ahd_set_scbptr(ahd, i);
9998 printf("%3d", i);
9999 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n",
10000 ahd_inb_scbram(ahd, SCB_CONTROL),
10001 ahd_inb_scbram(ahd, SCB_SCSIID),
10002 ahd_inw_scbram(ahd, SCB_NEXT),
10003 ahd_inw_scbram(ahd, SCB_NEXT2),
10004 ahd_inl_scbram(ahd, SCB_SGPTR),
10005 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR));
10006 }
10007 printf("\n");
10008 ahd_set_scbptr(ahd, saved_scb_index);
10009 ahd_restore_modes(ahd, saved_modes);
10010 }
10011 #endif /* 0 */
10012
10013 /**************************** Flexport Logic **********************************/
10014 /*
10015 * Read count 16bit words from 16bit word address start_addr from the
10016 * SEEPROM attached to the controller, into buf, using the controller's
10017 * SEEPROM reading state machine. Optionally treat the data as a byte
10018 * stream in terms of byte order.
10019 */
10020 int
10021 ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf,
10022 u_int start_addr, u_int count, int bytestream)
10023 {
10024 u_int cur_addr;
10025 u_int end_addr;
10026 int error;
10027
10028 /*
10029 * If we never make it through the loop even once,
10030 * we were passed invalid arguments.
10031 */
10032 error = EINVAL;
10033 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
10034 end_addr = start_addr + count;
10035 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) {
10036
10037 ahd_outb(ahd, SEEADR, cur_addr);
10038 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART);
10039
10040 error = ahd_wait_seeprom(ahd);
10041 if (error)
10042 break;
10043 if (bytestream != 0) {
10044 uint8_t *bytestream_ptr;
10045
10046 bytestream_ptr = (uint8_t *)buf;
10047 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT);
10048 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1);
10049 } else {
10050 /*
10051 * ahd_inw() already handles machine byte order.
10052 */
10053 *buf = ahd_inw(ahd, SEEDAT);
10054 }
10055 buf++;
10056 }
10057 return (error);
10058 }
10059
10060 /*
10061 * Write count 16bit words from buf, into SEEPROM attache to the
10062 * controller starting at 16bit word address start_addr, using the
10063 * controller's SEEPROM writing state machine.
10064 */
10065 int
10066 ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf,
10067 u_int start_addr, u_int count)
10068 {
10069 u_int cur_addr;
10070 u_int end_addr;
10071 int error;
10072 int retval;
10073
10074 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
10075 error = ENOENT;
10076
10077 /* Place the chip into write-enable mode */
10078 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR);
10079 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART);
10080 error = ahd_wait_seeprom(ahd);
10081 if (error)
10082 return (error);
10083
10084 /*
10085 * Write the data. If we don't get throught the loop at
10086 * least once, the arguments were invalid.
10087 */
10088 retval = EINVAL;
10089 end_addr = start_addr + count;
10090 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) {
10091 ahd_outw(ahd, SEEDAT, *buf++);
10092 ahd_outb(ahd, SEEADR, cur_addr);
10093 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART);
10094
10095 retval = ahd_wait_seeprom(ahd);
10096 if (retval)
10097 break;
10098 }
10099
10100 /*
10101 * Disable writes.
10102 */
10103 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR);
10104 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART);
10105 error = ahd_wait_seeprom(ahd);
10106 if (error)
10107 return (error);
10108 return (retval);
10109 }
10110
10111 /*
10112 * Wait ~100us for the serial eeprom to satisfy our request.
10113 */
10114 static int
10115 ahd_wait_seeprom(struct ahd_softc *ahd)
10116 {
10117 int cnt;
10118
10119 cnt = 5000;
10120 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt)
10121 ahd_delay(5);
10122
10123 if (cnt == 0)
10124 return (ETIMEDOUT);
10125 return (0);
10126 }
10127
10128 /*
10129 * Validate the two checksums in the per_channel
10130 * vital product data struct.
10131 */
10132 static int
10133 ahd_verify_vpd_cksum(struct vpd_config *vpd)
10134 {
10135 int i;
10136 int maxaddr;
10137 uint32_t checksum;
10138 uint8_t *vpdarray;
10139
10140 vpdarray = (uint8_t *)vpd;
10141 maxaddr = offsetof(struct vpd_config, vpd_checksum);
10142 checksum = 0;
10143 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++)
10144 checksum = checksum + vpdarray[i];
10145 if (checksum == 0
10146 || (-checksum & 0xFF) != vpd->vpd_checksum)
10147 return (0);
10148
10149 checksum = 0;
10150 maxaddr = offsetof(struct vpd_config, checksum);
10151 for (i = offsetof(struct vpd_config, default_target_flags);
10152 i < maxaddr; i++)
10153 checksum = checksum + vpdarray[i];
10154 if (checksum == 0
10155 || (-checksum & 0xFF) != vpd->checksum)
10156 return (0);
10157 return (1);
10158 }
10159
10160 int
10161 ahd_verify_cksum(struct seeprom_config *sc)
10162 {
10163 int i;
10164 int maxaddr;
10165 uint32_t checksum;
10166 uint16_t *scarray;
10167
10168 maxaddr = (sizeof(*sc)/2) - 1;
10169 checksum = 0;
10170 scarray = (uint16_t *)sc;
10171
10172 for (i = 0; i < maxaddr; i++)
10173 checksum = checksum + scarray[i];
10174 if (checksum == 0
10175 || (checksum & 0xFFFF) != sc->checksum) {
10176 return (0);
10177 } else {
10178 return (1);
10179 }
10180 }
10181
10182 int
10183 ahd_acquire_seeprom(struct ahd_softc *ahd)
10184 {
10185 /*
10186 * We should be able to determine the SEEPROM type
10187 * from the flexport logic, but unfortunately not
10188 * all implementations have this logic and there is
10189 * no programatic method for determining if the logic
10190 * is present.
10191 */
10192 return (1);
10193 #if 0
10194 uint8_t seetype;
10195 int error;
10196
10197 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype);
10198 if (error != 0
10199 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE))
10200 return (0);
10201 return (1);
10202 #endif
10203 }
10204
10205 void
10206 ahd_release_seeprom(struct ahd_softc *ahd)
10207 {
10208 /* Currently a no-op */
10209 }
10210
10211 /*
10212 * Wait at most 2 seconds for flexport arbitration to succeed.
10213 */
10214 static int
10215 ahd_wait_flexport(struct ahd_softc *ahd)
10216 {
10217 int cnt;
10218
10219 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
10220 cnt = 1000000 * 2 / 5;
10221 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt)
10222 ahd_delay(5);
10223
10224 if (cnt == 0)
10225 return (ETIMEDOUT);
10226 return (0);
10227 }
10228
10229 int
10230 ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value)
10231 {
10232 int error;
10233
10234 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
10235 if (addr > 7)
10236 panic("ahd_write_flexport: address out of range");
10237 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3));
10238 error = ahd_wait_flexport(ahd);
10239 if (error != 0)
10240 return (error);
10241 ahd_outb(ahd, BRDDAT, value);
10242 ahd_flush_device_writes(ahd);
10243 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3));
10244 ahd_flush_device_writes(ahd);
10245 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3));
10246 ahd_flush_device_writes(ahd);
10247 ahd_outb(ahd, BRDCTL, 0);
10248 ahd_flush_device_writes(ahd);
10249 return (0);
10250 }
10251
10252 int
10253 ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value)
10254 {
10255 int error;
10256
10257 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
10258 if (addr > 7)
10259 panic("ahd_read_flexport: address out of range");
10260 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3));
10261 error = ahd_wait_flexport(ahd);
10262 if (error != 0)
10263 return (error);
10264 *value = ahd_inb(ahd, BRDDAT);
10265 ahd_outb(ahd, BRDCTL, 0);
10266 ahd_flush_device_writes(ahd);
10267 return (0);
10268 }
10269
10270 /************************* Target Mode ****************************************/
10271 #ifdef AHD_TARGET_MODE
10272 cam_status
10273 ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb,
10274 struct ahd_tmode_tstate **tstate,
10275 struct ahd_tmode_lstate **lstate,
10276 int notfound_failure)
10277 {
10278
10279 if ((ahd->features & AHD_TARGETMODE) == 0)
10280 return (CAM_REQ_INVALID);
10281
10282 /*
10283 * Handle the 'black hole' device that sucks up
10284 * requests to unattached luns on enabled targets.
10285 */
10286 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD
10287 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
10288 *tstate = NULL;
10289 *lstate = ahd->black_hole;
10290 } else {
10291 u_int max_id;
10292
10293 max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
10294 if (ccb->ccb_h.target_id >= max_id)
10295 return (CAM_TID_INVALID);
10296
10297 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS)
10298 return (CAM_LUN_INVALID);
10299
10300 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id];
10301 *lstate = NULL;
10302 if (*tstate != NULL)
10303 *lstate =
10304 (*tstate)->enabled_luns[ccb->ccb_h.target_lun];
10305 }
10306
10307 if (notfound_failure != 0 && *lstate == NULL)
10308 return (CAM_PATH_INVALID);
10309
10310 return (CAM_REQ_CMP);
10311 }
10312
10313 void
10314 ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb)
10315 {
10316 #if NOT_YET
10317 struct ahd_tmode_tstate *tstate;
10318 struct ahd_tmode_lstate *lstate;
10319 struct ccb_en_lun *cel;
10320 cam_status status;
10321 u_int target;
10322 u_int lun;
10323 u_int target_mask;
10324 u_long s;
10325 char channel;
10326
10327 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate,
10328 /*notfound_failure*/FALSE);
10329
10330 if (status != CAM_REQ_CMP) {
10331 ccb->ccb_h.status = status;
10332 return;
10333 }
10334
10335 if ((ahd->features & AHD_MULTIROLE) != 0) {
10336 u_int our_id;
10337
10338 our_id = ahd->our_id;
10339 if (ccb->ccb_h.target_id != our_id) {
10340 if ((ahd->features & AHD_MULTI_TID) != 0
10341 && (ahd->flags & AHD_INITIATORROLE) != 0) {
10342 /*
10343 * Only allow additional targets if
10344 * the initiator role is disabled.
10345 * The hardware cannot handle a re-select-in
10346 * on the initiator id during a re-select-out
10347 * on a different target id.
10348 */
10349 status = CAM_TID_INVALID;
10350 } else if ((ahd->flags & AHD_INITIATORROLE) != 0
10351 || ahd->enabled_luns > 0) {
10352 /*
10353 * Only allow our target id to change
10354 * if the initiator role is not configured
10355 * and there are no enabled luns which
10356 * are attached to the currently registered
10357 * scsi id.
10358 */
10359 status = CAM_TID_INVALID;
10360 }
10361 }
10362 }
10363
10364 if (status != CAM_REQ_CMP) {
10365 ccb->ccb_h.status = status;
10366 return;
10367 }
10368
10369 /*
10370 * We now have an id that is valid.
10371 * If we aren't in target mode, switch modes.
10372 */
10373 if ((ahd->flags & AHD_TARGETROLE) == 0
10374 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
10375 u_long s;
10376
10377 printf("Configuring Target Mode\n");
10378 ahd_lock(ahd, &s);
10379 if (LIST_FIRST(&ahd->pending_scbs) != NULL) {
10380 ccb->ccb_h.status = CAM_BUSY;
10381 ahd_unlock(ahd, &s);
10382 return;
10383 }
10384 ahd->flags |= AHD_TARGETROLE;
10385 if ((ahd->features & AHD_MULTIROLE) == 0)
10386 ahd->flags &= ~AHD_INITIATORROLE;
10387 ahd_pause(ahd);
10388 ahd_loadseq(ahd);
10389 ahd_restart(ahd);
10390 ahd_unlock(ahd, &s);
10391 }
10392 cel = &ccb->cel;
10393 target = ccb->ccb_h.target_id;
10394 lun = ccb->ccb_h.target_lun;
10395 channel = SIM_CHANNEL(ahd, sim);
10396 target_mask = 0x01 << target;
10397 if (channel == 'B')
10398 target_mask <<= 8;
10399
10400 if (cel->enable != 0) {
10401 u_int scsiseq1;
10402
10403 /* Are we already enabled?? */
10404 if (lstate != NULL) {
10405 xpt_print_path(ccb->ccb_h.path);
10406 printf("Lun already enabled\n");
10407 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
10408 return;
10409 }
10410
10411 if (cel->grp6_len != 0
10412 || cel->grp7_len != 0) {
10413 /*
10414 * Don't (yet?) support vendor
10415 * specific commands.
10416 */
10417 ccb->ccb_h.status = CAM_REQ_INVALID;
10418 printf("Non-zero Group Codes\n");
10419 return;
10420 }
10421
10422 /*
10423 * Seems to be okay.
10424 * Setup our data structures.
10425 */
10426 if (target != CAM_TARGET_WILDCARD && tstate == NULL) {
10427 tstate = ahd_alloc_tstate(ahd, target, channel);
10428 if (tstate == NULL) {
10429 xpt_print_path(ccb->ccb_h.path);
10430 printf("Couldn't allocate tstate\n");
10431 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
10432 return;
10433 }
10434 }
10435 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT);
10436 if (lstate == NULL) {
10437 xpt_print_path(ccb->ccb_h.path);
10438 printf("Couldn't allocate lstate\n");
10439 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
10440 return;
10441 }
10442 memset(lstate, 0, sizeof(*lstate));
10443 status = xpt_create_path(&lstate->path, /*periph*/NULL,
10444 xpt_path_path_id(ccb->ccb_h.path),
10445 xpt_path_target_id(ccb->ccb_h.path),
10446 xpt_path_lun_id(ccb->ccb_h.path));
10447 if (status != CAM_REQ_CMP) {
10448 free(lstate, M_DEVBUF);
10449 xpt_print_path(ccb->ccb_h.path);
10450 printf("Couldn't allocate path\n");
10451 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
10452 return;
10453 }
10454 SLIST_INIT(&lstate->accept_tios);
10455 SLIST_INIT(&lstate->immed_notifies);
10456 ahd_lock(ahd, &s);
10457 ahd_pause(ahd);
10458 if (target != CAM_TARGET_WILDCARD) {
10459 tstate->enabled_luns[lun] = lstate;
10460 ahd->enabled_luns++;
10461
10462 if ((ahd->features & AHD_MULTI_TID) != 0) {
10463 u_int targid_mask;
10464
10465 targid_mask = ahd_inw(ahd, TARGID);
10466 targid_mask |= target_mask;
10467 ahd_outw(ahd, TARGID, targid_mask);
10468 ahd_update_scsiid(ahd, targid_mask);
10469 } else {
10470 u_int our_id;
10471 char channel;
10472
10473 channel = SIM_CHANNEL(ahd, sim);
10474 our_id = SIM_SCSI_ID(ahd, sim);
10475
10476 /*
10477 * This can only happen if selections
10478 * are not enabled
10479 */
10480 if (target != our_id) {
10481 u_int sblkctl;
10482 char cur_channel;
10483 int swap;
10484
10485 sblkctl = ahd_inb(ahd, SBLKCTL);
10486 cur_channel = (sblkctl & SELBUSB)
10487 ? 'B' : 'A';
10488 if ((ahd->features & AHD_TWIN) == 0)
10489 cur_channel = 'A';
10490 swap = cur_channel != channel;
10491 ahd->our_id = target;
10492
10493 if (swap)
10494 ahd_outb(ahd, SBLKCTL,
10495 sblkctl ^ SELBUSB);
10496
10497 ahd_outb(ahd, SCSIID, target);
10498
10499 if (swap)
10500 ahd_outb(ahd, SBLKCTL, sblkctl);
10501 }
10502 }
10503 } else
10504 ahd->black_hole = lstate;
10505 /* Allow select-in operations */
10506 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) {
10507 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
10508 scsiseq1 |= ENSELI;
10509 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1);
10510 scsiseq1 = ahd_inb(ahd, SCSISEQ1);
10511 scsiseq1 |= ENSELI;
10512 ahd_outb(ahd, SCSISEQ1, scsiseq1);
10513 }
10514 ahd_unpause(ahd);
10515 ahd_unlock(ahd, &s);
10516 ccb->ccb_h.status = CAM_REQ_CMP;
10517 xpt_print_path(ccb->ccb_h.path);
10518 printf("Lun now enabled for target mode\n");
10519 } else {
10520 struct scb *scb;
10521 int i, empty;
10522
10523 if (lstate == NULL) {
10524 ccb->ccb_h.status = CAM_LUN_INVALID;
10525 return;
10526 }
10527
10528 ahd_lock(ahd, &s);
10529
10530 ccb->ccb_h.status = CAM_REQ_CMP;
10531 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
10532 struct ccb_hdr *ccbh;
10533
10534 ccbh = &scb->io_ctx->ccb_h;
10535 if (ccbh->func_code == XPT_CONT_TARGET_IO
10536 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){
10537 printf("CTIO pending\n");
10538 ccb->ccb_h.status = CAM_REQ_INVALID;
10539 ahd_unlock(ahd, &s);
10540 return;
10541 }
10542 }
10543
10544 if (SLIST_FIRST(&lstate->accept_tios) != NULL) {
10545 printf("ATIOs pending\n");
10546 ccb->ccb_h.status = CAM_REQ_INVALID;
10547 }
10548
10549 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) {
10550 printf("INOTs pending\n");
10551 ccb->ccb_h.status = CAM_REQ_INVALID;
10552 }
10553
10554 if (ccb->ccb_h.status != CAM_REQ_CMP) {
10555 ahd_unlock(ahd, &s);
10556 return;
10557 }
10558
10559 xpt_print_path(ccb->ccb_h.path);
10560 printf("Target mode disabled\n");
10561 xpt_free_path(lstate->path);
10562 free(lstate, M_DEVBUF);
10563
10564 ahd_pause(ahd);
10565 /* Can we clean up the target too? */
10566 if (target != CAM_TARGET_WILDCARD) {
10567 tstate->enabled_luns[lun] = NULL;
10568 ahd->enabled_luns--;
10569 for (empty = 1, i = 0; i < 8; i++)
10570 if (tstate->enabled_luns[i] != NULL) {
10571 empty = 0;
10572 break;
10573 }
10574
10575 if (empty) {
10576 ahd_free_tstate(ahd, target, channel,
10577 /*force*/FALSE);
10578 if (ahd->features & AHD_MULTI_TID) {
10579 u_int targid_mask;
10580
10581 targid_mask = ahd_inw(ahd, TARGID);
10582 targid_mask &= ~target_mask;
10583 ahd_outw(ahd, TARGID, targid_mask);
10584 ahd_update_scsiid(ahd, targid_mask);
10585 }
10586 }
10587 } else {
10588
10589 ahd->black_hole = NULL;
10590
10591 /*
10592 * We can't allow selections without
10593 * our black hole device.
10594 */
10595 empty = TRUE;
10596 }
10597 if (ahd->enabled_luns == 0) {
10598 /* Disallow select-in */
10599 u_int scsiseq1;
10600
10601 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
10602 scsiseq1 &= ~ENSELI;
10603 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1);
10604 scsiseq1 = ahd_inb(ahd, SCSISEQ1);
10605 scsiseq1 &= ~ENSELI;
10606 ahd_outb(ahd, SCSISEQ1, scsiseq1);
10607
10608 if ((ahd->features & AHD_MULTIROLE) == 0) {
10609 printf("Configuring Initiator Mode\n");
10610 ahd->flags &= ~AHD_TARGETROLE;
10611 ahd->flags |= AHD_INITIATORROLE;
10612 ahd_pause(ahd);
10613 ahd_loadseq(ahd);
10614 ahd_restart(ahd);
10615 /*
10616 * Unpaused. The extra unpause
10617 * that follows is harmless.
10618 */
10619 }
10620 }
10621 ahd_unpause(ahd);
10622 ahd_unlock(ahd, &s);
10623 }
10624 #endif
10625 }
10626
10627 static void
10628 ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask)
10629 {
10630 #if NOT_YET
10631 u_int scsiid_mask;
10632 u_int scsiid;
10633
10634 if ((ahd->features & AHD_MULTI_TID) == 0)
10635 panic("ahd_update_scsiid called on non-multitid unit\n");
10636
10637 /*
10638 * Since we will rely on the TARGID mask
10639 * for selection enables, ensure that OID
10640 * in SCSIID is not set to some other ID
10641 * that we don't want to allow selections on.
10642 */
10643 if ((ahd->features & AHD_ULTRA2) != 0)
10644 scsiid = ahd_inb(ahd, SCSIID_ULTRA2);
10645 else
10646 scsiid = ahd_inb(ahd, SCSIID);
10647 scsiid_mask = 0x1 << (scsiid & OID);
10648 if ((targid_mask & scsiid_mask) == 0) {
10649 u_int our_id;
10650
10651 /* ffs counts from 1 */
10652 our_id = ffs(targid_mask);
10653 if (our_id == 0)
10654 our_id = ahd->our_id;
10655 else
10656 our_id--;
10657 scsiid &= TID;
10658 scsiid |= our_id;
10659 }
10660 if ((ahd->features & AHD_ULTRA2) != 0)
10661 ahd_outb(ahd, SCSIID_ULTRA2, scsiid);
10662 else
10663 ahd_outb(ahd, SCSIID, scsiid);
10664 #endif
10665 }
10666
10667 static void
10668 ahd_run_tqinfifo(struct ahd_softc *ahd, int paused)
10669 {
10670 struct target_cmd *cmd;
10671
10672 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD);
10673 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) {
10674
10675 /*
10676 * Only advance through the queue if we
10677 * have the resources to process the command.
10678 */
10679 if (ahd_handle_target_cmd(ahd, cmd) != 0)
10680 break;
10681
10682 cmd->cmd_valid = 0;
10683 ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
10684 ahd->shared_data_map.dmamap,
10685 ahd_targetcmd_offset(ahd, ahd->tqinfifonext),
10686 sizeof(struct target_cmd),
10687 BUS_DMASYNC_PREREAD);
10688 ahd->tqinfifonext++;
10689
10690 /*
10691 * Lazily update our position in the target mode incoming
10692 * command queue as seen by the sequencer.
10693 */
10694 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) {
10695 u_int hs_mailbox;
10696
10697 hs_mailbox = ahd_inb(ahd, HS_MAILBOX);
10698 hs_mailbox &= ~HOST_TQINPOS;
10699 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS;
10700 ahd_outb(ahd, HS_MAILBOX, hs_mailbox);
10701 }
10702 }
10703 }
10704
10705 static int
10706 ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd)
10707 {
10708 struct ahd_tmode_tstate *tstate;
10709 struct ahd_tmode_lstate *lstate;
10710 struct ccb_accept_tio *atio;
10711 uint8_t *byte;
10712 int initiator;
10713 int target;
10714 int lun;
10715
10716 initiator = SCSIID_TARGET(ahd, cmd->scsiid);
10717 target = SCSIID_OUR_ID(cmd->scsiid);
10718 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK);
10719
10720 byte = cmd->bytes;
10721 tstate = ahd->enabled_targets[target];
10722 lstate = NULL;
10723 if (tstate != NULL)
10724 lstate = tstate->enabled_luns[lun];
10725
10726 /*
10727 * Commands for disabled luns go to the black hole driver.
10728 */
10729 if (lstate == NULL)
10730 lstate = ahd->black_hole;
10731
10732 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios);
10733 if (atio == NULL) {
10734 ahd->flags |= AHD_TQINFIFO_BLOCKED;
10735 /*
10736 * Wait for more ATIOs from the peripheral driver for this lun.
10737 */
10738 return (1);
10739 } else
10740 ahd->flags &= ~AHD_TQINFIFO_BLOCKED;
10741 #ifdef AHD_DEBUG
10742 if ((ahd_debug & AHD_SHOW_TQIN) != 0)
10743 printf("Incoming command from %d for %d:%d%s\n",
10744 initiator, target, lun,
10745 lstate == ahd->black_hole ? "(Black Holed)" : "");
10746 #endif
10747 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle);
10748
10749 if (lstate == ahd->black_hole) {
10750 /* Fill in the wildcards */
10751 atio->ccb_h.target_id = target;
10752 atio->ccb_h.target_lun = lun;
10753 }
10754
10755 /*
10756 * Package it up and send it off to
10757 * whomever has this lun enabled.
10758 */
10759 atio->sense_len = 0;
10760 atio->init_id = initiator;
10761 if (byte[0] != 0xFF) {
10762 /* Tag was included */
10763 atio->tag_action = *byte++;
10764 atio->tag_id = *byte++;
10765 atio->ccb_h.flags = CAM_TAG_ACTION_VALID;
10766 } else {
10767 atio->ccb_h.flags = 0;
10768 }
10769 byte++;
10770
10771 /* Okay. Now determine the cdb size based on the command code */
10772 switch (*byte >> CMD_GROUP_CODE_SHIFT) {
10773 case 0:
10774 atio->cdb_len = 6;
10775 break;
10776 case 1:
10777 case 2:
10778 atio->cdb_len = 10;
10779 break;
10780 case 4:
10781 atio->cdb_len = 16;
10782 break;
10783 case 5:
10784 atio->cdb_len = 12;
10785 break;
10786 case 3:
10787 default:
10788 /* Only copy the opcode. */
10789 atio->cdb_len = 1;
10790 printf("Reserved or VU command code type encountered\n");
10791 break;
10792 }
10793
10794 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len);
10795
10796 atio->ccb_h.status |= CAM_CDB_RECVD;
10797
10798 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) {
10799 /*
10800 * We weren't allowed to disconnect.
10801 * We're hanging on the bus until a
10802 * continue target I/O comes in response
10803 * to this accept tio.
10804 */
10805 #ifdef AHD_DEBUG
10806 if ((ahd_debug & AHD_SHOW_TQIN) != 0)
10807 printf("Received Immediate Command %d:%d:%d - %p\n",
10808 initiator, target, lun, ahd->pending_device);
10809 #endif
10810 ahd->pending_device = lstate;
10811 ahd_freeze_ccb((union ccb *)atio);
10812 atio->ccb_h.flags |= CAM_DIS_DISCONNECT;
10813 }
10814 xpt_done((union ccb*)atio);
10815 return (0);
10816 }
10817
10818 #endif
Ubuntu Artful kernel mirror