]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/blob - drivers/scsi/aic7xxx/aic79xx_osm.c
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
[mirror_ubuntu-jammy-kernel.git] / drivers / scsi / aic7xxx / aic79xx_osm.c
1 /*
2 * Adaptec AIC79xx device driver for Linux.
3 *
4 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
5 *
6 * --------------------------------------------------------------------------
7 * Copyright (c) 1994-2000 Justin T. Gibbs.
8 * Copyright (c) 1997-1999 Doug Ledford
9 * Copyright (c) 2000-2003 Adaptec Inc.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45 #include "aic79xx_osm.h"
46 #include "aic79xx_inline.h"
47 #include <scsi/scsicam.h>
48
49 static struct scsi_transport_template *ahd_linux_transport_template = NULL;
50
51 #include <linux/init.h> /* __setup */
52 #include <linux/mm.h> /* For fetching system memory size */
53 #include <linux/blkdev.h> /* For block_size() */
54 #include <linux/delay.h> /* For ssleep/msleep */
55 #include <linux/device.h>
56
57 /*
58 * Bucket size for counting good commands in between bad ones.
59 */
60 #define AHD_LINUX_ERR_THRESH 1000
61
62 /*
63 * Set this to the delay in seconds after SCSI bus reset.
64 * Note, we honor this only for the initial bus reset.
65 * The scsi error recovery code performs its own bus settle
66 * delay handling for error recovery actions.
67 */
68 #ifdef CONFIG_AIC79XX_RESET_DELAY_MS
69 #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
70 #else
71 #define AIC79XX_RESET_DELAY 5000
72 #endif
73
74 /*
75 * To change the default number of tagged transactions allowed per-device,
76 * add a line to the lilo.conf file like:
77 * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
78 * which will result in the first four devices on the first two
79 * controllers being set to a tagged queue depth of 32.
80 *
81 * The tag_commands is an array of 16 to allow for wide and twin adapters.
82 * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
83 * for channel 1.
84 */
85 typedef struct {
86 uint16_t tag_commands[16]; /* Allow for wide/twin adapters. */
87 } adapter_tag_info_t;
88
89 /*
90 * Modify this as you see fit for your system.
91 *
92 * 0 tagged queuing disabled
93 * 1 <= n <= 253 n == max tags ever dispatched.
94 *
95 * The driver will throttle the number of commands dispatched to a
96 * device if it returns queue full. For devices with a fixed maximum
97 * queue depth, the driver will eventually determine this depth and
98 * lock it in (a console message is printed to indicate that a lock
99 * has occurred). On some devices, queue full is returned for a temporary
100 * resource shortage. These devices will return queue full at varying
101 * depths. The driver will throttle back when the queue fulls occur and
102 * attempt to slowly increase the depth over time as the device recovers
103 * from the resource shortage.
104 *
105 * In this example, the first line will disable tagged queueing for all
106 * the devices on the first probed aic79xx adapter.
107 *
108 * The second line enables tagged queueing with 4 commands/LUN for IDs
109 * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
110 * driver to attempt to use up to 64 tags for ID 1.
111 *
112 * The third line is the same as the first line.
113 *
114 * The fourth line disables tagged queueing for devices 0 and 3. It
115 * enables tagged queueing for the other IDs, with 16 commands/LUN
116 * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
117 * IDs 2, 5-7, and 9-15.
118 */
119
120 /*
121 * NOTE: The below structure is for reference only, the actual structure
122 * to modify in order to change things is just below this comment block.
123 adapter_tag_info_t aic79xx_tag_info[] =
124 {
125 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
126 {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
127 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
128 {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
129 };
130 */
131
132 #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
133 #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
134 #else
135 #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
136 #endif
137
138 #define AIC79XX_CONFIGED_TAG_COMMANDS { \
139 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
140 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
141 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
142 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
143 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
144 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
145 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
146 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE \
147 }
148
149 /*
150 * By default, use the number of commands specified by
151 * the users kernel configuration.
152 */
153 static adapter_tag_info_t aic79xx_tag_info[] =
154 {
155 {AIC79XX_CONFIGED_TAG_COMMANDS},
156 {AIC79XX_CONFIGED_TAG_COMMANDS},
157 {AIC79XX_CONFIGED_TAG_COMMANDS},
158 {AIC79XX_CONFIGED_TAG_COMMANDS},
159 {AIC79XX_CONFIGED_TAG_COMMANDS},
160 {AIC79XX_CONFIGED_TAG_COMMANDS},
161 {AIC79XX_CONFIGED_TAG_COMMANDS},
162 {AIC79XX_CONFIGED_TAG_COMMANDS},
163 {AIC79XX_CONFIGED_TAG_COMMANDS},
164 {AIC79XX_CONFIGED_TAG_COMMANDS},
165 {AIC79XX_CONFIGED_TAG_COMMANDS},
166 {AIC79XX_CONFIGED_TAG_COMMANDS},
167 {AIC79XX_CONFIGED_TAG_COMMANDS},
168 {AIC79XX_CONFIGED_TAG_COMMANDS},
169 {AIC79XX_CONFIGED_TAG_COMMANDS},
170 {AIC79XX_CONFIGED_TAG_COMMANDS}
171 };
172
173 /*
174 * The I/O cell on the chip is very configurable in respect to its analog
175 * characteristics. Set the defaults here; they can be overriden with
176 * the proper insmod parameters.
177 */
178 struct ahd_linux_iocell_opts
179 {
180 uint8_t precomp;
181 uint8_t slewrate;
182 uint8_t amplitude;
183 };
184 #define AIC79XX_DEFAULT_PRECOMP 0xFF
185 #define AIC79XX_DEFAULT_SLEWRATE 0xFF
186 #define AIC79XX_DEFAULT_AMPLITUDE 0xFF
187 #define AIC79XX_DEFAULT_IOOPTS \
188 { \
189 AIC79XX_DEFAULT_PRECOMP, \
190 AIC79XX_DEFAULT_SLEWRATE, \
191 AIC79XX_DEFAULT_AMPLITUDE \
192 }
193 #define AIC79XX_PRECOMP_INDEX 0
194 #define AIC79XX_SLEWRATE_INDEX 1
195 #define AIC79XX_AMPLITUDE_INDEX 2
196 static struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
197 {
198 AIC79XX_DEFAULT_IOOPTS,
199 AIC79XX_DEFAULT_IOOPTS,
200 AIC79XX_DEFAULT_IOOPTS,
201 AIC79XX_DEFAULT_IOOPTS,
202 AIC79XX_DEFAULT_IOOPTS,
203 AIC79XX_DEFAULT_IOOPTS,
204 AIC79XX_DEFAULT_IOOPTS,
205 AIC79XX_DEFAULT_IOOPTS,
206 AIC79XX_DEFAULT_IOOPTS,
207 AIC79XX_DEFAULT_IOOPTS,
208 AIC79XX_DEFAULT_IOOPTS,
209 AIC79XX_DEFAULT_IOOPTS,
210 AIC79XX_DEFAULT_IOOPTS,
211 AIC79XX_DEFAULT_IOOPTS,
212 AIC79XX_DEFAULT_IOOPTS,
213 AIC79XX_DEFAULT_IOOPTS
214 };
215
216 /*
217 * There should be a specific return value for this in scsi.h, but
218 * it seems that most drivers ignore it.
219 */
220 #define DID_UNDERFLOW DID_ERROR
221
222 void
223 ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
224 {
225 printk("(scsi%d:%c:%d:%d): ",
226 ahd->platform_data->host->host_no,
227 scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
228 scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
229 scb != NULL ? SCB_GET_LUN(scb) : -1);
230 }
231
232 /*
233 * XXX - these options apply unilaterally to _all_ adapters
234 * cards in the system. This should be fixed. Exceptions to this
235 * rule are noted in the comments.
236 */
237
238 /*
239 * Skip the scsi bus reset. Non 0 make us skip the reset at startup. This
240 * has no effect on any later resets that might occur due to things like
241 * SCSI bus timeouts.
242 */
243 static uint32_t aic79xx_no_reset;
244
245 /*
246 * Should we force EXTENDED translation on a controller.
247 * 0 == Use whatever is in the SEEPROM or default to off
248 * 1 == Use whatever is in the SEEPROM or default to on
249 */
250 static uint32_t aic79xx_extended;
251
252 /*
253 * PCI bus parity checking of the Adaptec controllers. This is somewhat
254 * dubious at best. To my knowledge, this option has never actually
255 * solved a PCI parity problem, but on certain machines with broken PCI
256 * chipset configurations, it can generate tons of false error messages.
257 * It's included in the driver for completeness.
258 * 0 = Shut off PCI parity check
259 * non-0 = Enable PCI parity check
260 *
261 * NOTE: you can't actually pass -1 on the lilo prompt. So, to set this
262 * variable to -1 you would actually want to simply pass the variable
263 * name without a number. That will invert the 0 which will result in
264 * -1.
265 */
266 static uint32_t aic79xx_pci_parity = ~0;
267
268 /*
269 * There are lots of broken chipsets in the world. Some of them will
270 * violate the PCI spec when we issue byte sized memory writes to our
271 * controller. I/O mapped register access, if allowed by the given
272 * platform, will work in almost all cases.
273 */
274 uint32_t aic79xx_allow_memio = ~0;
275
276 /*
277 * So that we can set how long each device is given as a selection timeout.
278 * The table of values goes like this:
279 * 0 - 256ms
280 * 1 - 128ms
281 * 2 - 64ms
282 * 3 - 32ms
283 * We default to 256ms because some older devices need a longer time
284 * to respond to initial selection.
285 */
286 static uint32_t aic79xx_seltime;
287
288 /*
289 * Certain devices do not perform any aging on commands. Should the
290 * device be saturated by commands in one portion of the disk, it is
291 * possible for transactions on far away sectors to never be serviced.
292 * To handle these devices, we can periodically send an ordered tag to
293 * force all outstanding transactions to be serviced prior to a new
294 * transaction.
295 */
296 uint32_t aic79xx_periodic_otag;
297
298 /* Some storage boxes are using an LSI chip which has a bug making it
299 * impossible to use aic79xx Rev B chip in 320 speeds. The following
300 * storage boxes have been reported to be buggy:
301 * EonStor 3U 16-Bay: U16U-G3A3
302 * EonStor 2U 12-Bay: U12U-G3A3
303 * SentinelRAID: 2500F R5 / R6
304 * SentinelRAID: 2500F R1
305 * SentinelRAID: 2500F/1500F
306 * SentinelRAID: 150F
307 *
308 * To get around this LSI bug, you can set your board to 160 mode
309 * or you can enable the SLOWCRC bit.
310 */
311 uint32_t aic79xx_slowcrc;
312
313 /*
314 * Module information and settable options.
315 */
316 static char *aic79xx = NULL;
317
318 MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>");
319 MODULE_DESCRIPTION("Adaptec Aic790X U320 SCSI Host Bus Adapter driver");
320 MODULE_LICENSE("Dual BSD/GPL");
321 MODULE_VERSION(AIC79XX_DRIVER_VERSION);
322 module_param(aic79xx, charp, 0444);
323 MODULE_PARM_DESC(aic79xx,
324 "period-delimited options string:\n"
325 " verbose Enable verbose/diagnostic logging\n"
326 " allow_memio Allow device registers to be memory mapped\n"
327 " debug Bitmask of debug values to enable\n"
328 " no_reset Supress initial bus resets\n"
329 " extended Enable extended geometry on all controllers\n"
330 " periodic_otag Send an ordered tagged transaction\n"
331 " periodically to prevent tag starvation.\n"
332 " This may be required by some older disk\n"
333 " or drives/RAID arrays.\n"
334 " tag_info:<tag_str> Set per-target tag depth\n"
335 " global_tag_depth:<int> Global tag depth for all targets on all buses\n"
336 " slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
337 " precomp:<pcomp_list> Set the signal precompensation (0-7).\n"
338 " amplitude:<int> Set the signal amplitude (0-7).\n"
339 " seltime:<int> Selection Timeout:\n"
340 " (0/256ms,1/128ms,2/64ms,3/32ms)\n"
341 " slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
342 "\n"
343 " Sample /etc/modprobe.conf line:\n"
344 " Enable verbose logging\n"
345 " Set tag depth on Controller 2/Target 2 to 10 tags\n"
346 " Shorten the selection timeout to 128ms\n"
347 "\n"
348 " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
349 );
350
351 static void ahd_linux_handle_scsi_status(struct ahd_softc *,
352 struct scsi_device *,
353 struct scb *);
354 static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
355 struct scsi_cmnd *cmd);
356 static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
357 static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
358 static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
359 struct ahd_devinfo *devinfo);
360 static void ahd_linux_device_queue_depth(struct scsi_device *);
361 static int ahd_linux_run_command(struct ahd_softc*,
362 struct ahd_linux_device *,
363 struct scsi_cmnd *);
364 static void ahd_linux_setup_tag_info_global(char *p);
365 static int aic79xx_setup(char *c);
366
367 static int ahd_linux_unit;
368
369
370 /****************************** Inlines ***************************************/
371 static __inline void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
372
373 static __inline void
374 ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
375 {
376 struct scsi_cmnd *cmd;
377 int direction;
378
379 cmd = scb->io_ctx;
380 direction = cmd->sc_data_direction;
381 ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
382 if (cmd->use_sg != 0) {
383 struct scatterlist *sg;
384
385 sg = (struct scatterlist *)cmd->request_buffer;
386 pci_unmap_sg(ahd->dev_softc, sg, cmd->use_sg, direction);
387 } else if (cmd->request_bufflen != 0) {
388 pci_unmap_single(ahd->dev_softc,
389 scb->platform_data->buf_busaddr,
390 cmd->request_bufflen, direction);
391 }
392 }
393
394 /******************************** Macros **************************************/
395 #define BUILD_SCSIID(ahd, cmd) \
396 (((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id)
397
398 /*
399 * Return a string describing the driver.
400 */
401 static const char *
402 ahd_linux_info(struct Scsi_Host *host)
403 {
404 static char buffer[512];
405 char ahd_info[256];
406 char *bp;
407 struct ahd_softc *ahd;
408
409 bp = &buffer[0];
410 ahd = *(struct ahd_softc **)host->hostdata;
411 memset(bp, 0, sizeof(buffer));
412 strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev ");
413 strcat(bp, AIC79XX_DRIVER_VERSION);
414 strcat(bp, "\n");
415 strcat(bp, " <");
416 strcat(bp, ahd->description);
417 strcat(bp, ">\n");
418 strcat(bp, " ");
419 ahd_controller_info(ahd, ahd_info);
420 strcat(bp, ahd_info);
421 strcat(bp, "\n");
422
423 return (bp);
424 }
425
426 /*
427 * Queue an SCB to the controller.
428 */
429 static int
430 ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
431 {
432 struct ahd_softc *ahd;
433 struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
434 int rtn = SCSI_MLQUEUE_HOST_BUSY;
435
436 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
437
438 cmd->scsi_done = scsi_done;
439 cmd->result = CAM_REQ_INPROG << 16;
440 rtn = ahd_linux_run_command(ahd, dev, cmd);
441
442 return rtn;
443 }
444
445 static inline struct scsi_target **
446 ahd_linux_target_in_softc(struct scsi_target *starget)
447 {
448 struct ahd_softc *ahd =
449 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
450 unsigned int target_offset;
451
452 target_offset = starget->id;
453 if (starget->channel != 0)
454 target_offset += 8;
455
456 return &ahd->platform_data->starget[target_offset];
457 }
458
459 static int
460 ahd_linux_target_alloc(struct scsi_target *starget)
461 {
462 struct ahd_softc *ahd =
463 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
464 struct seeprom_config *sc = ahd->seep_config;
465 unsigned long flags;
466 struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
467 struct ahd_devinfo devinfo;
468 struct ahd_initiator_tinfo *tinfo;
469 struct ahd_tmode_tstate *tstate;
470 char channel = starget->channel + 'A';
471
472 ahd_lock(ahd, &flags);
473
474 BUG_ON(*ahd_targp != NULL);
475
476 *ahd_targp = starget;
477
478 if (sc) {
479 int flags = sc->device_flags[starget->id];
480
481 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
482 starget->id, &tstate);
483
484 if ((flags & CFPACKETIZED) == 0) {
485 /* Do not negotiate packetized transfers */
486 spi_rd_strm(starget) = 0;
487 spi_pcomp_en(starget) = 0;
488 spi_rti(starget) = 0;
489 spi_wr_flow(starget) = 0;
490 spi_hold_mcs(starget) = 0;
491 } else {
492 if ((ahd->features & AHD_RTI) == 0)
493 spi_rti(starget) = 0;
494 }
495
496 if ((flags & CFQAS) == 0)
497 spi_qas(starget) = 0;
498
499 /* Transinfo values have been set to BIOS settings */
500 spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
501 spi_min_period(starget) = tinfo->user.period;
502 spi_max_offset(starget) = tinfo->user.offset;
503 }
504
505 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
506 starget->id, &tstate);
507 ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
508 CAM_LUN_WILDCARD, channel,
509 ROLE_INITIATOR);
510 ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
511 AHD_TRANS_GOAL, /*paused*/FALSE);
512 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
513 AHD_TRANS_GOAL, /*paused*/FALSE);
514 ahd_unlock(ahd, &flags);
515
516 return 0;
517 }
518
519 static void
520 ahd_linux_target_destroy(struct scsi_target *starget)
521 {
522 struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
523
524 *ahd_targp = NULL;
525 }
526
527 static int
528 ahd_linux_slave_alloc(struct scsi_device *sdev)
529 {
530 struct ahd_softc *ahd =
531 *((struct ahd_softc **)sdev->host->hostdata);
532 struct ahd_linux_device *dev;
533
534 if (bootverbose)
535 printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
536
537 dev = scsi_transport_device_data(sdev);
538 memset(dev, 0, sizeof(*dev));
539
540 /*
541 * We start out life using untagged
542 * transactions of which we allow one.
543 */
544 dev->openings = 1;
545
546 /*
547 * Set maxtags to 0. This will be changed if we
548 * later determine that we are dealing with
549 * a tagged queuing capable device.
550 */
551 dev->maxtags = 0;
552
553 return (0);
554 }
555
556 static int
557 ahd_linux_slave_configure(struct scsi_device *sdev)
558 {
559 struct ahd_softc *ahd;
560
561 ahd = *((struct ahd_softc **)sdev->host->hostdata);
562 if (bootverbose)
563 sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
564
565 ahd_linux_device_queue_depth(sdev);
566
567 /* Initial Domain Validation */
568 if (!spi_initial_dv(sdev->sdev_target))
569 spi_dv_device(sdev);
570
571 return 0;
572 }
573
574 #if defined(__i386__)
575 /*
576 * Return the disk geometry for the given SCSI device.
577 */
578 static int
579 ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
580 sector_t capacity, int geom[])
581 {
582 uint8_t *bh;
583 int heads;
584 int sectors;
585 int cylinders;
586 int ret;
587 int extended;
588 struct ahd_softc *ahd;
589
590 ahd = *((struct ahd_softc **)sdev->host->hostdata);
591
592 bh = scsi_bios_ptable(bdev);
593 if (bh) {
594 ret = scsi_partsize(bh, capacity,
595 &geom[2], &geom[0], &geom[1]);
596 kfree(bh);
597 if (ret != -1)
598 return (ret);
599 }
600 heads = 64;
601 sectors = 32;
602 cylinders = aic_sector_div(capacity, heads, sectors);
603
604 if (aic79xx_extended != 0)
605 extended = 1;
606 else
607 extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
608 if (extended && cylinders >= 1024) {
609 heads = 255;
610 sectors = 63;
611 cylinders = aic_sector_div(capacity, heads, sectors);
612 }
613 geom[0] = heads;
614 geom[1] = sectors;
615 geom[2] = cylinders;
616 return (0);
617 }
618 #endif
619
620 /*
621 * Abort the current SCSI command(s).
622 */
623 static int
624 ahd_linux_abort(struct scsi_cmnd *cmd)
625 {
626 int error;
627
628 error = ahd_linux_queue_abort_cmd(cmd);
629
630 return error;
631 }
632
633 /*
634 * Attempt to send a target reset message to the device that timed out.
635 */
636 static int
637 ahd_linux_dev_reset(struct scsi_cmnd *cmd)
638 {
639 struct ahd_softc *ahd;
640 struct ahd_linux_device *dev;
641 struct scb *reset_scb;
642 u_int cdb_byte;
643 int retval = SUCCESS;
644 int paused;
645 int wait;
646 struct ahd_initiator_tinfo *tinfo;
647 struct ahd_tmode_tstate *tstate;
648 unsigned long flags;
649 DECLARE_COMPLETION_ONSTACK(done);
650
651 reset_scb = NULL;
652 paused = FALSE;
653 wait = FALSE;
654 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
655
656 scmd_printk(KERN_INFO, cmd,
657 "Attempting to queue a TARGET RESET message:");
658
659 printf("CDB:");
660 for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
661 printf(" 0x%x", cmd->cmnd[cdb_byte]);
662 printf("\n");
663
664 /*
665 * Determine if we currently own this command.
666 */
667 dev = scsi_transport_device_data(cmd->device);
668
669 if (dev == NULL) {
670 /*
671 * No target device for this command exists,
672 * so we must not still own the command.
673 */
674 scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
675 return SUCCESS;
676 }
677
678 /*
679 * Generate us a new SCB
680 */
681 reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
682 if (!reset_scb) {
683 scmd_printk(KERN_INFO, cmd, "No SCB available\n");
684 return FAILED;
685 }
686
687 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
688 cmd->device->id, &tstate);
689 reset_scb->io_ctx = cmd;
690 reset_scb->platform_data->dev = dev;
691 reset_scb->sg_count = 0;
692 ahd_set_residual(reset_scb, 0);
693 ahd_set_sense_residual(reset_scb, 0);
694 reset_scb->platform_data->xfer_len = 0;
695 reset_scb->hscb->control = 0;
696 reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd);
697 reset_scb->hscb->lun = cmd->device->lun;
698 reset_scb->hscb->cdb_len = 0;
699 reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
700 reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
701 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
702 reset_scb->flags |= SCB_PACKETIZED;
703 } else {
704 reset_scb->hscb->control |= MK_MESSAGE;
705 }
706 dev->openings--;
707 dev->active++;
708 dev->commands_issued++;
709
710 ahd_lock(ahd, &flags);
711
712 LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
713 ahd_queue_scb(ahd, reset_scb);
714
715 ahd->platform_data->eh_done = &done;
716 ahd_unlock(ahd, &flags);
717
718 printf("%s: Device reset code sleeping\n", ahd_name(ahd));
719 if (!wait_for_completion_timeout(&done, 5 * HZ)) {
720 ahd_lock(ahd, &flags);
721 ahd->platform_data->eh_done = NULL;
722 ahd_unlock(ahd, &flags);
723 printf("%s: Device reset timer expired (active %d)\n",
724 ahd_name(ahd), dev->active);
725 retval = FAILED;
726 }
727 printf("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
728
729 return (retval);
730 }
731
732 /*
733 * Reset the SCSI bus.
734 */
735 static int
736 ahd_linux_bus_reset(struct scsi_cmnd *cmd)
737 {
738 struct ahd_softc *ahd;
739 int found;
740 unsigned long flags;
741
742 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
743 #ifdef AHD_DEBUG
744 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
745 printf("%s: Bus reset called for cmd %p\n",
746 ahd_name(ahd), cmd);
747 #endif
748 ahd_lock(ahd, &flags);
749
750 found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
751 /*initiate reset*/TRUE);
752 ahd_unlock(ahd, &flags);
753
754 if (bootverbose)
755 printf("%s: SCSI bus reset delivered. "
756 "%d SCBs aborted.\n", ahd_name(ahd), found);
757
758 return (SUCCESS);
759 }
760
761 struct scsi_host_template aic79xx_driver_template = {
762 .module = THIS_MODULE,
763 .name = "aic79xx",
764 .proc_name = "aic79xx",
765 .proc_info = ahd_linux_proc_info,
766 .info = ahd_linux_info,
767 .queuecommand = ahd_linux_queue,
768 .eh_abort_handler = ahd_linux_abort,
769 .eh_device_reset_handler = ahd_linux_dev_reset,
770 .eh_bus_reset_handler = ahd_linux_bus_reset,
771 #if defined(__i386__)
772 .bios_param = ahd_linux_biosparam,
773 #endif
774 .can_queue = AHD_MAX_QUEUE,
775 .this_id = -1,
776 .cmd_per_lun = 2,
777 .use_clustering = ENABLE_CLUSTERING,
778 .slave_alloc = ahd_linux_slave_alloc,
779 .slave_configure = ahd_linux_slave_configure,
780 .target_alloc = ahd_linux_target_alloc,
781 .target_destroy = ahd_linux_target_destroy,
782 };
783
784 /******************************** Bus DMA *************************************/
785 int
786 ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
787 bus_size_t alignment, bus_size_t boundary,
788 dma_addr_t lowaddr, dma_addr_t highaddr,
789 bus_dma_filter_t *filter, void *filterarg,
790 bus_size_t maxsize, int nsegments,
791 bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
792 {
793 bus_dma_tag_t dmat;
794
795 dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT);
796 if (dmat == NULL)
797 return (ENOMEM);
798
799 /*
800 * Linux is very simplistic about DMA memory. For now don't
801 * maintain all specification information. Once Linux supplies
802 * better facilities for doing these operations, or the
803 * needs of this particular driver change, we might need to do
804 * more here.
805 */
806 dmat->alignment = alignment;
807 dmat->boundary = boundary;
808 dmat->maxsize = maxsize;
809 *ret_tag = dmat;
810 return (0);
811 }
812
813 void
814 ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
815 {
816 free(dmat, M_DEVBUF);
817 }
818
819 int
820 ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
821 int flags, bus_dmamap_t *mapp)
822 {
823 *vaddr = pci_alloc_consistent(ahd->dev_softc,
824 dmat->maxsize, mapp);
825 if (*vaddr == NULL)
826 return (ENOMEM);
827 return(0);
828 }
829
830 void
831 ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
832 void* vaddr, bus_dmamap_t map)
833 {
834 pci_free_consistent(ahd->dev_softc, dmat->maxsize,
835 vaddr, map);
836 }
837
838 int
839 ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
840 void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
841 void *cb_arg, int flags)
842 {
843 /*
844 * Assume for now that this will only be used during
845 * initialization and not for per-transaction buffer mapping.
846 */
847 bus_dma_segment_t stack_sg;
848
849 stack_sg.ds_addr = map;
850 stack_sg.ds_len = dmat->maxsize;
851 cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
852 return (0);
853 }
854
855 void
856 ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
857 {
858 }
859
860 int
861 ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
862 {
863 /* Nothing to do */
864 return (0);
865 }
866
867 /********************* Platform Dependent Functions ***************************/
868 static void
869 ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
870 {
871
872 if ((instance >= 0)
873 && (instance < ARRAY_SIZE(aic79xx_iocell_info))) {
874 uint8_t *iocell_info;
875
876 iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
877 iocell_info[index] = value & 0xFFFF;
878 if (bootverbose)
879 printf("iocell[%d:%ld] = %d\n", instance, index, value);
880 }
881 }
882
883 static void
884 ahd_linux_setup_tag_info_global(char *p)
885 {
886 int tags, i, j;
887
888 tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
889 printf("Setting Global Tags= %d\n", tags);
890
891 for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) {
892 for (j = 0; j < AHD_NUM_TARGETS; j++) {
893 aic79xx_tag_info[i].tag_commands[j] = tags;
894 }
895 }
896 }
897
898 static void
899 ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
900 {
901
902 if ((instance >= 0) && (targ >= 0)
903 && (instance < ARRAY_SIZE(aic79xx_tag_info))
904 && (targ < AHD_NUM_TARGETS)) {
905 aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
906 if (bootverbose)
907 printf("tag_info[%d:%d] = %d\n", instance, targ, value);
908 }
909 }
910
911 static char *
912 ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
913 void (*callback)(u_long, int, int, int32_t),
914 u_long callback_arg)
915 {
916 char *tok_end;
917 char *tok_end2;
918 int i;
919 int instance;
920 int targ;
921 int done;
922 char tok_list[] = {'.', ',', '{', '}', '\0'};
923
924 /* All options use a ':' name/arg separator */
925 if (*opt_arg != ':')
926 return (opt_arg);
927 opt_arg++;
928 instance = -1;
929 targ = -1;
930 done = FALSE;
931 /*
932 * Restore separator that may be in
933 * the middle of our option argument.
934 */
935 tok_end = strchr(opt_arg, '\0');
936 if (tok_end < end)
937 *tok_end = ',';
938 while (!done) {
939 switch (*opt_arg) {
940 case '{':
941 if (instance == -1) {
942 instance = 0;
943 } else {
944 if (depth > 1) {
945 if (targ == -1)
946 targ = 0;
947 } else {
948 printf("Malformed Option %s\n",
949 opt_name);
950 done = TRUE;
951 }
952 }
953 opt_arg++;
954 break;
955 case '}':
956 if (targ != -1)
957 targ = -1;
958 else if (instance != -1)
959 instance = -1;
960 opt_arg++;
961 break;
962 case ',':
963 case '.':
964 if (instance == -1)
965 done = TRUE;
966 else if (targ >= 0)
967 targ++;
968 else if (instance >= 0)
969 instance++;
970 opt_arg++;
971 break;
972 case '\0':
973 done = TRUE;
974 break;
975 default:
976 tok_end = end;
977 for (i = 0; tok_list[i]; i++) {
978 tok_end2 = strchr(opt_arg, tok_list[i]);
979 if ((tok_end2) && (tok_end2 < tok_end))
980 tok_end = tok_end2;
981 }
982 callback(callback_arg, instance, targ,
983 simple_strtol(opt_arg, NULL, 0));
984 opt_arg = tok_end;
985 break;
986 }
987 }
988 return (opt_arg);
989 }
990
991 /*
992 * Handle Linux boot parameters. This routine allows for assigning a value
993 * to a parameter with a ':' between the parameter and the value.
994 * ie. aic79xx=stpwlev:1,extended
995 */
996 static int
997 aic79xx_setup(char *s)
998 {
999 int i, n;
1000 char *p;
1001 char *end;
1002
1003 static struct {
1004 const char *name;
1005 uint32_t *flag;
1006 } options[] = {
1007 { "extended", &aic79xx_extended },
1008 { "no_reset", &aic79xx_no_reset },
1009 { "verbose", &aic79xx_verbose },
1010 { "allow_memio", &aic79xx_allow_memio},
1011 #ifdef AHD_DEBUG
1012 { "debug", &ahd_debug },
1013 #endif
1014 { "periodic_otag", &aic79xx_periodic_otag },
1015 { "pci_parity", &aic79xx_pci_parity },
1016 { "seltime", &aic79xx_seltime },
1017 { "tag_info", NULL },
1018 { "global_tag_depth", NULL},
1019 { "slewrate", NULL },
1020 { "precomp", NULL },
1021 { "amplitude", NULL },
1022 { "slowcrc", &aic79xx_slowcrc },
1023 };
1024
1025 end = strchr(s, '\0');
1026
1027 /*
1028 * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
1029 * will never be 0 in this case.
1030 */
1031 n = 0;
1032
1033 while ((p = strsep(&s, ",.")) != NULL) {
1034 if (*p == '\0')
1035 continue;
1036 for (i = 0; i < ARRAY_SIZE(options); i++) {
1037
1038 n = strlen(options[i].name);
1039 if (strncmp(options[i].name, p, n) == 0)
1040 break;
1041 }
1042 if (i == ARRAY_SIZE(options))
1043 continue;
1044
1045 if (strncmp(p, "global_tag_depth", n) == 0) {
1046 ahd_linux_setup_tag_info_global(p + n);
1047 } else if (strncmp(p, "tag_info", n) == 0) {
1048 s = ahd_parse_brace_option("tag_info", p + n, end,
1049 2, ahd_linux_setup_tag_info, 0);
1050 } else if (strncmp(p, "slewrate", n) == 0) {
1051 s = ahd_parse_brace_option("slewrate",
1052 p + n, end, 1, ahd_linux_setup_iocell_info,
1053 AIC79XX_SLEWRATE_INDEX);
1054 } else if (strncmp(p, "precomp", n) == 0) {
1055 s = ahd_parse_brace_option("precomp",
1056 p + n, end, 1, ahd_linux_setup_iocell_info,
1057 AIC79XX_PRECOMP_INDEX);
1058 } else if (strncmp(p, "amplitude", n) == 0) {
1059 s = ahd_parse_brace_option("amplitude",
1060 p + n, end, 1, ahd_linux_setup_iocell_info,
1061 AIC79XX_AMPLITUDE_INDEX);
1062 } else if (p[n] == ':') {
1063 *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
1064 } else if (!strncmp(p, "verbose", n)) {
1065 *(options[i].flag) = 1;
1066 } else {
1067 *(options[i].flag) ^= 0xFFFFFFFF;
1068 }
1069 }
1070 return 1;
1071 }
1072
1073 __setup("aic79xx=", aic79xx_setup);
1074
1075 uint32_t aic79xx_verbose;
1076
1077 int
1078 ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
1079 {
1080 char buf[80];
1081 struct Scsi_Host *host;
1082 char *new_name;
1083 u_long s;
1084 int retval;
1085
1086 template->name = ahd->description;
1087 host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
1088 if (host == NULL)
1089 return (ENOMEM);
1090
1091 *((struct ahd_softc **)host->hostdata) = ahd;
1092 ahd->platform_data->host = host;
1093 host->can_queue = AHD_MAX_QUEUE;
1094 host->cmd_per_lun = 2;
1095 host->sg_tablesize = AHD_NSEG;
1096 host->this_id = ahd->our_id;
1097 host->irq = ahd->platform_data->irq;
1098 host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
1099 host->max_lun = AHD_NUM_LUNS;
1100 host->max_channel = 0;
1101 host->sg_tablesize = AHD_NSEG;
1102 ahd_lock(ahd, &s);
1103 ahd_set_unit(ahd, ahd_linux_unit++);
1104 ahd_unlock(ahd, &s);
1105 sprintf(buf, "scsi%d", host->host_no);
1106 new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
1107 if (new_name != NULL) {
1108 strcpy(new_name, buf);
1109 ahd_set_name(ahd, new_name);
1110 }
1111 host->unique_id = ahd->unit;
1112 ahd_linux_initialize_scsi_bus(ahd);
1113 ahd_intr_enable(ahd, TRUE);
1114
1115 host->transportt = ahd_linux_transport_template;
1116
1117 retval = scsi_add_host(host, &ahd->dev_softc->dev);
1118 if (retval) {
1119 printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
1120 scsi_host_put(host);
1121 return retval;
1122 }
1123
1124 scsi_scan_host(host);
1125 return 0;
1126 }
1127
1128 uint64_t
1129 ahd_linux_get_memsize(void)
1130 {
1131 struct sysinfo si;
1132
1133 si_meminfo(&si);
1134 return ((uint64_t)si.totalram << PAGE_SHIFT);
1135 }
1136
1137 /*
1138 * Place the SCSI bus into a known state by either resetting it,
1139 * or forcing transfer negotiations on the next command to any
1140 * target.
1141 */
1142 static void
1143 ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
1144 {
1145 u_int target_id;
1146 u_int numtarg;
1147 unsigned long s;
1148
1149 target_id = 0;
1150 numtarg = 0;
1151
1152 if (aic79xx_no_reset != 0)
1153 ahd->flags &= ~AHD_RESET_BUS_A;
1154
1155 if ((ahd->flags & AHD_RESET_BUS_A) != 0)
1156 ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
1157 else
1158 numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
1159
1160 ahd_lock(ahd, &s);
1161
1162 /*
1163 * Force negotiation to async for all targets that
1164 * will not see an initial bus reset.
1165 */
1166 for (; target_id < numtarg; target_id++) {
1167 struct ahd_devinfo devinfo;
1168 struct ahd_initiator_tinfo *tinfo;
1169 struct ahd_tmode_tstate *tstate;
1170
1171 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1172 target_id, &tstate);
1173 ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
1174 CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
1175 ahd_update_neg_request(ahd, &devinfo, tstate,
1176 tinfo, AHD_NEG_ALWAYS);
1177 }
1178 ahd_unlock(ahd, &s);
1179 /* Give the bus some time to recover */
1180 if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
1181 ahd_freeze_simq(ahd);
1182 msleep(AIC79XX_RESET_DELAY);
1183 ahd_release_simq(ahd);
1184 }
1185 }
1186
1187 int
1188 ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
1189 {
1190 ahd->platform_data =
1191 malloc(sizeof(struct ahd_platform_data), M_DEVBUF, M_NOWAIT);
1192 if (ahd->platform_data == NULL)
1193 return (ENOMEM);
1194 memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
1195 ahd->platform_data->irq = AHD_LINUX_NOIRQ;
1196 ahd_lockinit(ahd);
1197 ahd->seltime = (aic79xx_seltime & 0x3) << 4;
1198 return (0);
1199 }
1200
1201 void
1202 ahd_platform_free(struct ahd_softc *ahd)
1203 {
1204 struct scsi_target *starget;
1205 int i;
1206
1207 if (ahd->platform_data != NULL) {
1208 /* destroy all of the device and target objects */
1209 for (i = 0; i < AHD_NUM_TARGETS; i++) {
1210 starget = ahd->platform_data->starget[i];
1211 if (starget != NULL) {
1212 ahd->platform_data->starget[i] = NULL;
1213 }
1214 }
1215
1216 if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
1217 free_irq(ahd->platform_data->irq, ahd);
1218 if (ahd->tags[0] == BUS_SPACE_PIO
1219 && ahd->bshs[0].ioport != 0)
1220 release_region(ahd->bshs[0].ioport, 256);
1221 if (ahd->tags[1] == BUS_SPACE_PIO
1222 && ahd->bshs[1].ioport != 0)
1223 release_region(ahd->bshs[1].ioport, 256);
1224 if (ahd->tags[0] == BUS_SPACE_MEMIO
1225 && ahd->bshs[0].maddr != NULL) {
1226 iounmap(ahd->bshs[0].maddr);
1227 release_mem_region(ahd->platform_data->mem_busaddr,
1228 0x1000);
1229 }
1230 if (ahd->platform_data->host)
1231 scsi_host_put(ahd->platform_data->host);
1232
1233 free(ahd->platform_data, M_DEVBUF);
1234 }
1235 }
1236
1237 void
1238 ahd_platform_init(struct ahd_softc *ahd)
1239 {
1240 /*
1241 * Lookup and commit any modified IO Cell options.
1242 */
1243 if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
1244 struct ahd_linux_iocell_opts *iocell_opts;
1245
1246 iocell_opts = &aic79xx_iocell_info[ahd->unit];
1247 if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
1248 AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
1249 if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
1250 AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
1251 if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
1252 AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
1253 }
1254
1255 }
1256
1257 void
1258 ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
1259 {
1260 ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1261 SCB_GET_CHANNEL(ahd, scb),
1262 SCB_GET_LUN(scb), SCB_LIST_NULL,
1263 ROLE_UNKNOWN, CAM_REQUEUE_REQ);
1264 }
1265
1266 void
1267 ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
1268 struct ahd_devinfo *devinfo, ahd_queue_alg alg)
1269 {
1270 struct ahd_linux_device *dev;
1271 int was_queuing;
1272 int now_queuing;
1273
1274 if (sdev == NULL)
1275 return;
1276
1277 dev = scsi_transport_device_data(sdev);
1278
1279 if (dev == NULL)
1280 return;
1281 was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
1282 switch (alg) {
1283 default:
1284 case AHD_QUEUE_NONE:
1285 now_queuing = 0;
1286 break;
1287 case AHD_QUEUE_BASIC:
1288 now_queuing = AHD_DEV_Q_BASIC;
1289 break;
1290 case AHD_QUEUE_TAGGED:
1291 now_queuing = AHD_DEV_Q_TAGGED;
1292 break;
1293 }
1294 if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
1295 && (was_queuing != now_queuing)
1296 && (dev->active != 0)) {
1297 dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
1298 dev->qfrozen++;
1299 }
1300
1301 dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
1302 if (now_queuing) {
1303 u_int usertags;
1304
1305 usertags = ahd_linux_user_tagdepth(ahd, devinfo);
1306 if (!was_queuing) {
1307 /*
1308 * Start out agressively and allow our
1309 * dynamic queue depth algorithm to take
1310 * care of the rest.
1311 */
1312 dev->maxtags = usertags;
1313 dev->openings = dev->maxtags - dev->active;
1314 }
1315 if (dev->maxtags == 0) {
1316 /*
1317 * Queueing is disabled by the user.
1318 */
1319 dev->openings = 1;
1320 } else if (alg == AHD_QUEUE_TAGGED) {
1321 dev->flags |= AHD_DEV_Q_TAGGED;
1322 if (aic79xx_periodic_otag != 0)
1323 dev->flags |= AHD_DEV_PERIODIC_OTAG;
1324 } else
1325 dev->flags |= AHD_DEV_Q_BASIC;
1326 } else {
1327 /* We can only have one opening. */
1328 dev->maxtags = 0;
1329 dev->openings = 1 - dev->active;
1330 }
1331
1332 switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
1333 case AHD_DEV_Q_BASIC:
1334 scsi_set_tag_type(sdev, MSG_SIMPLE_TASK);
1335 scsi_activate_tcq(sdev, dev->openings + dev->active);
1336 break;
1337 case AHD_DEV_Q_TAGGED:
1338 scsi_set_tag_type(sdev, MSG_ORDERED_TASK);
1339 scsi_activate_tcq(sdev, dev->openings + dev->active);
1340 break;
1341 default:
1342 /*
1343 * We allow the OS to queue 2 untagged transactions to
1344 * us at any time even though we can only execute them
1345 * serially on the controller/device. This should
1346 * remove some latency.
1347 */
1348 scsi_deactivate_tcq(sdev, 1);
1349 break;
1350 }
1351 }
1352
1353 int
1354 ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
1355 int lun, u_int tag, role_t role, uint32_t status)
1356 {
1357 return 0;
1358 }
1359
1360 static u_int
1361 ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
1362 {
1363 static int warned_user;
1364 u_int tags;
1365
1366 tags = 0;
1367 if ((ahd->user_discenable & devinfo->target_mask) != 0) {
1368 if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) {
1369
1370 if (warned_user == 0) {
1371 printf(KERN_WARNING
1372 "aic79xx: WARNING: Insufficient tag_info instances\n"
1373 "aic79xx: for installed controllers. Using defaults\n"
1374 "aic79xx: Please update the aic79xx_tag_info array in\n"
1375 "aic79xx: the aic79xx_osm.c source file.\n");
1376 warned_user++;
1377 }
1378 tags = AHD_MAX_QUEUE;
1379 } else {
1380 adapter_tag_info_t *tag_info;
1381
1382 tag_info = &aic79xx_tag_info[ahd->unit];
1383 tags = tag_info->tag_commands[devinfo->target_offset];
1384 if (tags > AHD_MAX_QUEUE)
1385 tags = AHD_MAX_QUEUE;
1386 }
1387 }
1388 return (tags);
1389 }
1390
1391 /*
1392 * Determines the queue depth for a given device.
1393 */
1394 static void
1395 ahd_linux_device_queue_depth(struct scsi_device *sdev)
1396 {
1397 struct ahd_devinfo devinfo;
1398 u_int tags;
1399 struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
1400
1401 ahd_compile_devinfo(&devinfo,
1402 ahd->our_id,
1403 sdev->sdev_target->id, sdev->lun,
1404 sdev->sdev_target->channel == 0 ? 'A' : 'B',
1405 ROLE_INITIATOR);
1406 tags = ahd_linux_user_tagdepth(ahd, &devinfo);
1407 if (tags != 0 && sdev->tagged_supported != 0) {
1408
1409 ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
1410 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1411 devinfo.lun, AC_TRANSFER_NEG);
1412 ahd_print_devinfo(ahd, &devinfo);
1413 printf("Tagged Queuing enabled. Depth %d\n", tags);
1414 } else {
1415 ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
1416 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1417 devinfo.lun, AC_TRANSFER_NEG);
1418 }
1419 }
1420
1421 static int
1422 ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
1423 struct scsi_cmnd *cmd)
1424 {
1425 struct scb *scb;
1426 struct hardware_scb *hscb;
1427 struct ahd_initiator_tinfo *tinfo;
1428 struct ahd_tmode_tstate *tstate;
1429 u_int col_idx;
1430 uint16_t mask;
1431 unsigned long flags;
1432
1433 ahd_lock(ahd, &flags);
1434
1435 /*
1436 * Get an scb to use.
1437 */
1438 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1439 cmd->device->id, &tstate);
1440 if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
1441 || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
1442 col_idx = AHD_NEVER_COL_IDX;
1443 } else {
1444 col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
1445 cmd->device->lun);
1446 }
1447 if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
1448 ahd->flags |= AHD_RESOURCE_SHORTAGE;
1449 ahd_unlock(ahd, &flags);
1450 return SCSI_MLQUEUE_HOST_BUSY;
1451 }
1452
1453 scb->io_ctx = cmd;
1454 scb->platform_data->dev = dev;
1455 hscb = scb->hscb;
1456 cmd->host_scribble = (char *)scb;
1457
1458 /*
1459 * Fill out basics of the HSCB.
1460 */
1461 hscb->control = 0;
1462 hscb->scsiid = BUILD_SCSIID(ahd, cmd);
1463 hscb->lun = cmd->device->lun;
1464 scb->hscb->task_management = 0;
1465 mask = SCB_GET_TARGET_MASK(ahd, scb);
1466
1467 if ((ahd->user_discenable & mask) != 0)
1468 hscb->control |= DISCENB;
1469
1470 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
1471 scb->flags |= SCB_PACKETIZED;
1472
1473 if ((tstate->auto_negotiate & mask) != 0) {
1474 scb->flags |= SCB_AUTO_NEGOTIATE;
1475 scb->hscb->control |= MK_MESSAGE;
1476 }
1477
1478 if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
1479 int msg_bytes;
1480 uint8_t tag_msgs[2];
1481
1482 msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
1483 if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
1484 hscb->control |= tag_msgs[0];
1485 if (tag_msgs[0] == MSG_ORDERED_TASK)
1486 dev->commands_since_idle_or_otag = 0;
1487 } else
1488 if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
1489 && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
1490 hscb->control |= MSG_ORDERED_TASK;
1491 dev->commands_since_idle_or_otag = 0;
1492 } else {
1493 hscb->control |= MSG_SIMPLE_TASK;
1494 }
1495 }
1496
1497 hscb->cdb_len = cmd->cmd_len;
1498 memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
1499
1500 scb->platform_data->xfer_len = 0;
1501 ahd_set_residual(scb, 0);
1502 ahd_set_sense_residual(scb, 0);
1503 scb->sg_count = 0;
1504 if (cmd->use_sg != 0) {
1505 void *sg;
1506 struct scatterlist *cur_seg;
1507 u_int nseg;
1508 int dir;
1509
1510 cur_seg = (struct scatterlist *)cmd->request_buffer;
1511 dir = cmd->sc_data_direction;
1512 nseg = pci_map_sg(ahd->dev_softc, cur_seg,
1513 cmd->use_sg, dir);
1514 scb->platform_data->xfer_len = 0;
1515 for (sg = scb->sg_list; nseg > 0; nseg--, cur_seg++) {
1516 dma_addr_t addr;
1517 bus_size_t len;
1518
1519 addr = sg_dma_address(cur_seg);
1520 len = sg_dma_len(cur_seg);
1521 scb->platform_data->xfer_len += len;
1522 sg = ahd_sg_setup(ahd, scb, sg, addr, len,
1523 /*last*/nseg == 1);
1524 }
1525 } else if (cmd->request_bufflen != 0) {
1526 void *sg;
1527 dma_addr_t addr;
1528 int dir;
1529
1530 sg = scb->sg_list;
1531 dir = cmd->sc_data_direction;
1532 addr = pci_map_single(ahd->dev_softc,
1533 cmd->request_buffer,
1534 cmd->request_bufflen, dir);
1535 scb->platform_data->xfer_len = cmd->request_bufflen;
1536 scb->platform_data->buf_busaddr = addr;
1537 sg = ahd_sg_setup(ahd, scb, sg, addr,
1538 cmd->request_bufflen, /*last*/TRUE);
1539 }
1540
1541 LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
1542 dev->openings--;
1543 dev->active++;
1544 dev->commands_issued++;
1545
1546 if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
1547 dev->commands_since_idle_or_otag++;
1548 scb->flags |= SCB_ACTIVE;
1549 ahd_queue_scb(ahd, scb);
1550
1551 ahd_unlock(ahd, &flags);
1552
1553 return 0;
1554 }
1555
1556 /*
1557 * SCSI controller interrupt handler.
1558 */
1559 irqreturn_t
1560 ahd_linux_isr(int irq, void *dev_id)
1561 {
1562 struct ahd_softc *ahd;
1563 u_long flags;
1564 int ours;
1565
1566 ahd = (struct ahd_softc *) dev_id;
1567 ahd_lock(ahd, &flags);
1568 ours = ahd_intr(ahd);
1569 ahd_unlock(ahd, &flags);
1570 return IRQ_RETVAL(ours);
1571 }
1572
1573 void
1574 ahd_send_async(struct ahd_softc *ahd, char channel,
1575 u_int target, u_int lun, ac_code code)
1576 {
1577 switch (code) {
1578 case AC_TRANSFER_NEG:
1579 {
1580 char buf[80];
1581 struct scsi_target *starget;
1582 struct info_str info;
1583 struct ahd_initiator_tinfo *tinfo;
1584 struct ahd_tmode_tstate *tstate;
1585 unsigned int target_ppr_options;
1586
1587 BUG_ON(target == CAM_TARGET_WILDCARD);
1588
1589 info.buffer = buf;
1590 info.length = sizeof(buf);
1591 info.offset = 0;
1592 info.pos = 0;
1593 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
1594 target, &tstate);
1595
1596 /*
1597 * Don't bother reporting results while
1598 * negotiations are still pending.
1599 */
1600 if (tinfo->curr.period != tinfo->goal.period
1601 || tinfo->curr.width != tinfo->goal.width
1602 || tinfo->curr.offset != tinfo->goal.offset
1603 || tinfo->curr.ppr_options != tinfo->goal.ppr_options)
1604 if (bootverbose == 0)
1605 break;
1606
1607 /*
1608 * Don't bother reporting results that
1609 * are identical to those last reported.
1610 */
1611 starget = ahd->platform_data->starget[target];
1612 if (starget == NULL)
1613 break;
1614
1615 target_ppr_options =
1616 (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
1617 + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
1618 + (spi_iu(starget) ? MSG_EXT_PPR_IU_REQ : 0)
1619 + (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
1620 + (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
1621 + (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
1622 + (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
1623 + (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
1624
1625 if (tinfo->curr.period == spi_period(starget)
1626 && tinfo->curr.width == spi_width(starget)
1627 && tinfo->curr.offset == spi_offset(starget)
1628 && tinfo->curr.ppr_options == target_ppr_options)
1629 if (bootverbose == 0)
1630 break;
1631
1632 spi_period(starget) = tinfo->curr.period;
1633 spi_width(starget) = tinfo->curr.width;
1634 spi_offset(starget) = tinfo->curr.offset;
1635 spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
1636 spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
1637 spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
1638 spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
1639 spi_pcomp_en(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
1640 spi_rti(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RTI ? 1 : 0;
1641 spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
1642 spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
1643 spi_display_xfer_agreement(starget);
1644 break;
1645 }
1646 case AC_SENT_BDR:
1647 {
1648 WARN_ON(lun != CAM_LUN_WILDCARD);
1649 scsi_report_device_reset(ahd->platform_data->host,
1650 channel - 'A', target);
1651 break;
1652 }
1653 case AC_BUS_RESET:
1654 if (ahd->platform_data->host != NULL) {
1655 scsi_report_bus_reset(ahd->platform_data->host,
1656 channel - 'A');
1657 }
1658 break;
1659 default:
1660 panic("ahd_send_async: Unexpected async event");
1661 }
1662 }
1663
1664 /*
1665 * Calls the higher level scsi done function and frees the scb.
1666 */
1667 void
1668 ahd_done(struct ahd_softc *ahd, struct scb *scb)
1669 {
1670 struct scsi_cmnd *cmd;
1671 struct ahd_linux_device *dev;
1672
1673 if ((scb->flags & SCB_ACTIVE) == 0) {
1674 printf("SCB %d done'd twice\n", SCB_GET_TAG(scb));
1675 ahd_dump_card_state(ahd);
1676 panic("Stopping for safety");
1677 }
1678 LIST_REMOVE(scb, pending_links);
1679 cmd = scb->io_ctx;
1680 dev = scb->platform_data->dev;
1681 dev->active--;
1682 dev->openings++;
1683 if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
1684 cmd->result &= ~(CAM_DEV_QFRZN << 16);
1685 dev->qfrozen--;
1686 }
1687 ahd_linux_unmap_scb(ahd, scb);
1688
1689 /*
1690 * Guard against stale sense data.
1691 * The Linux mid-layer assumes that sense
1692 * was retrieved anytime the first byte of
1693 * the sense buffer looks "sane".
1694 */
1695 cmd->sense_buffer[0] = 0;
1696 if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
1697 uint32_t amount_xferred;
1698
1699 amount_xferred =
1700 ahd_get_transfer_length(scb) - ahd_get_residual(scb);
1701 if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
1702 #ifdef AHD_DEBUG
1703 if ((ahd_debug & AHD_SHOW_MISC) != 0) {
1704 ahd_print_path(ahd, scb);
1705 printf("Set CAM_UNCOR_PARITY\n");
1706 }
1707 #endif
1708 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
1709 #ifdef AHD_REPORT_UNDERFLOWS
1710 /*
1711 * This code is disabled by default as some
1712 * clients of the SCSI system do not properly
1713 * initialize the underflow parameter. This
1714 * results in spurious termination of commands
1715 * that complete as expected (e.g. underflow is
1716 * allowed as command can return variable amounts
1717 * of data.
1718 */
1719 } else if (amount_xferred < scb->io_ctx->underflow) {
1720 u_int i;
1721
1722 ahd_print_path(ahd, scb);
1723 printf("CDB:");
1724 for (i = 0; i < scb->io_ctx->cmd_len; i++)
1725 printf(" 0x%x", scb->io_ctx->cmnd[i]);
1726 printf("\n");
1727 ahd_print_path(ahd, scb);
1728 printf("Saw underflow (%ld of %ld bytes). "
1729 "Treated as error\n",
1730 ahd_get_residual(scb),
1731 ahd_get_transfer_length(scb));
1732 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1733 #endif
1734 } else {
1735 ahd_set_transaction_status(scb, CAM_REQ_CMP);
1736 }
1737 } else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
1738 ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
1739 }
1740
1741 if (dev->openings == 1
1742 && ahd_get_transaction_status(scb) == CAM_REQ_CMP
1743 && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
1744 dev->tag_success_count++;
1745 /*
1746 * Some devices deal with temporary internal resource
1747 * shortages by returning queue full. When the queue
1748 * full occurrs, we throttle back. Slowly try to get
1749 * back to our previous queue depth.
1750 */
1751 if ((dev->openings + dev->active) < dev->maxtags
1752 && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
1753 dev->tag_success_count = 0;
1754 dev->openings++;
1755 }
1756
1757 if (dev->active == 0)
1758 dev->commands_since_idle_or_otag = 0;
1759
1760 if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
1761 printf("Recovery SCB completes\n");
1762 if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
1763 || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
1764 ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
1765
1766 if (ahd->platform_data->eh_done)
1767 complete(ahd->platform_data->eh_done);
1768 }
1769
1770 ahd_free_scb(ahd, scb);
1771 ahd_linux_queue_cmd_complete(ahd, cmd);
1772 }
1773
1774 static void
1775 ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
1776 struct scsi_device *sdev, struct scb *scb)
1777 {
1778 struct ahd_devinfo devinfo;
1779 struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
1780
1781 ahd_compile_devinfo(&devinfo,
1782 ahd->our_id,
1783 sdev->sdev_target->id, sdev->lun,
1784 sdev->sdev_target->channel == 0 ? 'A' : 'B',
1785 ROLE_INITIATOR);
1786
1787 /*
1788 * We don't currently trust the mid-layer to
1789 * properly deal with queue full or busy. So,
1790 * when one occurs, we tell the mid-layer to
1791 * unconditionally requeue the command to us
1792 * so that we can retry it ourselves. We also
1793 * implement our own throttling mechanism so
1794 * we don't clobber the device with too many
1795 * commands.
1796 */
1797 switch (ahd_get_scsi_status(scb)) {
1798 default:
1799 break;
1800 case SCSI_STATUS_CHECK_COND:
1801 case SCSI_STATUS_CMD_TERMINATED:
1802 {
1803 struct scsi_cmnd *cmd;
1804
1805 /*
1806 * Copy sense information to the OS's cmd
1807 * structure if it is available.
1808 */
1809 cmd = scb->io_ctx;
1810 if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
1811 struct scsi_status_iu_header *siu;
1812 u_int sense_size;
1813 u_int sense_offset;
1814
1815 if (scb->flags & SCB_SENSE) {
1816 sense_size = MIN(sizeof(struct scsi_sense_data)
1817 - ahd_get_sense_residual(scb),
1818 sizeof(cmd->sense_buffer));
1819 sense_offset = 0;
1820 } else {
1821 /*
1822 * Copy only the sense data into the provided
1823 * buffer.
1824 */
1825 siu = (struct scsi_status_iu_header *)
1826 scb->sense_data;
1827 sense_size = MIN(scsi_4btoul(siu->sense_length),
1828 sizeof(cmd->sense_buffer));
1829 sense_offset = SIU_SENSE_OFFSET(siu);
1830 }
1831
1832 memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
1833 memcpy(cmd->sense_buffer,
1834 ahd_get_sense_buf(ahd, scb)
1835 + sense_offset, sense_size);
1836 cmd->result |= (DRIVER_SENSE << 24);
1837
1838 #ifdef AHD_DEBUG
1839 if (ahd_debug & AHD_SHOW_SENSE) {
1840 int i;
1841
1842 printf("Copied %d bytes of sense data at %d:",
1843 sense_size, sense_offset);
1844 for (i = 0; i < sense_size; i++) {
1845 if ((i & 0xF) == 0)
1846 printf("\n");
1847 printf("0x%x ", cmd->sense_buffer[i]);
1848 }
1849 printf("\n");
1850 }
1851 #endif
1852 }
1853 break;
1854 }
1855 case SCSI_STATUS_QUEUE_FULL:
1856 /*
1857 * By the time the core driver has returned this
1858 * command, all other commands that were queued
1859 * to us but not the device have been returned.
1860 * This ensures that dev->active is equal to
1861 * the number of commands actually queued to
1862 * the device.
1863 */
1864 dev->tag_success_count = 0;
1865 if (dev->active != 0) {
1866 /*
1867 * Drop our opening count to the number
1868 * of commands currently outstanding.
1869 */
1870 dev->openings = 0;
1871 #ifdef AHD_DEBUG
1872 if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
1873 ahd_print_path(ahd, scb);
1874 printf("Dropping tag count to %d\n",
1875 dev->active);
1876 }
1877 #endif
1878 if (dev->active == dev->tags_on_last_queuefull) {
1879
1880 dev->last_queuefull_same_count++;
1881 /*
1882 * If we repeatedly see a queue full
1883 * at the same queue depth, this
1884 * device has a fixed number of tag
1885 * slots. Lock in this tag depth
1886 * so we stop seeing queue fulls from
1887 * this device.
1888 */
1889 if (dev->last_queuefull_same_count
1890 == AHD_LOCK_TAGS_COUNT) {
1891 dev->maxtags = dev->active;
1892 ahd_print_path(ahd, scb);
1893 printf("Locking max tag count at %d\n",
1894 dev->active);
1895 }
1896 } else {
1897 dev->tags_on_last_queuefull = dev->active;
1898 dev->last_queuefull_same_count = 0;
1899 }
1900 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
1901 ahd_set_scsi_status(scb, SCSI_STATUS_OK);
1902 ahd_platform_set_tags(ahd, sdev, &devinfo,
1903 (dev->flags & AHD_DEV_Q_BASIC)
1904 ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
1905 break;
1906 }
1907 /*
1908 * Drop down to a single opening, and treat this
1909 * as if the target returned BUSY SCSI status.
1910 */
1911 dev->openings = 1;
1912 ahd_platform_set_tags(ahd, sdev, &devinfo,
1913 (dev->flags & AHD_DEV_Q_BASIC)
1914 ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
1915 ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
1916 }
1917 }
1918
1919 static void
1920 ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
1921 {
1922 int status;
1923 int new_status = DID_OK;
1924 int do_fallback = 0;
1925 int scsi_status;
1926
1927 /*
1928 * Map CAM error codes into Linux Error codes. We
1929 * avoid the conversion so that the DV code has the
1930 * full error information available when making
1931 * state change decisions.
1932 */
1933
1934 status = ahd_cmd_get_transaction_status(cmd);
1935 switch (status) {
1936 case CAM_REQ_INPROG:
1937 case CAM_REQ_CMP:
1938 new_status = DID_OK;
1939 break;
1940 case CAM_AUTOSENSE_FAIL:
1941 new_status = DID_ERROR;
1942 /* Fallthrough */
1943 case CAM_SCSI_STATUS_ERROR:
1944 scsi_status = ahd_cmd_get_scsi_status(cmd);
1945
1946 switch(scsi_status) {
1947 case SCSI_STATUS_CMD_TERMINATED:
1948 case SCSI_STATUS_CHECK_COND:
1949 if ((cmd->result >> 24) != DRIVER_SENSE) {
1950 do_fallback = 1;
1951 } else {
1952 struct scsi_sense_data *sense;
1953
1954 sense = (struct scsi_sense_data *)
1955 &cmd->sense_buffer;
1956 if (sense->extra_len >= 5 &&
1957 (sense->add_sense_code == 0x47
1958 || sense->add_sense_code == 0x48))
1959 do_fallback = 1;
1960 }
1961 break;
1962 default:
1963 break;
1964 }
1965 break;
1966 case CAM_REQ_ABORTED:
1967 new_status = DID_ABORT;
1968 break;
1969 case CAM_BUSY:
1970 new_status = DID_BUS_BUSY;
1971 break;
1972 case CAM_REQ_INVALID:
1973 case CAM_PATH_INVALID:
1974 new_status = DID_BAD_TARGET;
1975 break;
1976 case CAM_SEL_TIMEOUT:
1977 new_status = DID_NO_CONNECT;
1978 break;
1979 case CAM_SCSI_BUS_RESET:
1980 case CAM_BDR_SENT:
1981 new_status = DID_RESET;
1982 break;
1983 case CAM_UNCOR_PARITY:
1984 new_status = DID_PARITY;
1985 do_fallback = 1;
1986 break;
1987 case CAM_CMD_TIMEOUT:
1988 new_status = DID_TIME_OUT;
1989 do_fallback = 1;
1990 break;
1991 case CAM_REQ_CMP_ERR:
1992 case CAM_UNEXP_BUSFREE:
1993 case CAM_DATA_RUN_ERR:
1994 new_status = DID_ERROR;
1995 do_fallback = 1;
1996 break;
1997 case CAM_UA_ABORT:
1998 case CAM_NO_HBA:
1999 case CAM_SEQUENCE_FAIL:
2000 case CAM_CCB_LEN_ERR:
2001 case CAM_PROVIDE_FAIL:
2002 case CAM_REQ_TERMIO:
2003 case CAM_UNREC_HBA_ERROR:
2004 case CAM_REQ_TOO_BIG:
2005 new_status = DID_ERROR;
2006 break;
2007 case CAM_REQUEUE_REQ:
2008 new_status = DID_REQUEUE;
2009 break;
2010 default:
2011 /* We should never get here */
2012 new_status = DID_ERROR;
2013 break;
2014 }
2015
2016 if (do_fallback) {
2017 printf("%s: device overrun (status %x) on %d:%d:%d\n",
2018 ahd_name(ahd), status, cmd->device->channel,
2019 cmd->device->id, cmd->device->lun);
2020 }
2021
2022 ahd_cmd_set_transaction_status(cmd, new_status);
2023
2024 cmd->scsi_done(cmd);
2025 }
2026
2027 void
2028 ahd_freeze_simq(struct ahd_softc *ahd)
2029 {
2030 scsi_block_requests(ahd->platform_data->host);
2031 }
2032
2033 void
2034 ahd_release_simq(struct ahd_softc *ahd)
2035 {
2036 scsi_unblock_requests(ahd->platform_data->host);
2037 }
2038
2039 static int
2040 ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
2041 {
2042 struct ahd_softc *ahd;
2043 struct ahd_linux_device *dev;
2044 struct scb *pending_scb;
2045 u_int saved_scbptr;
2046 u_int active_scbptr;
2047 u_int last_phase;
2048 u_int saved_scsiid;
2049 u_int cdb_byte;
2050 int retval;
2051 int was_paused;
2052 int paused;
2053 int wait;
2054 int disconnected;
2055 ahd_mode_state saved_modes;
2056 unsigned long flags;
2057
2058 pending_scb = NULL;
2059 paused = FALSE;
2060 wait = FALSE;
2061 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
2062
2063 scmd_printk(KERN_INFO, cmd,
2064 "Attempting to queue an ABORT message:");
2065
2066 printf("CDB:");
2067 for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
2068 printf(" 0x%x", cmd->cmnd[cdb_byte]);
2069 printf("\n");
2070
2071 ahd_lock(ahd, &flags);
2072
2073 /*
2074 * First determine if we currently own this command.
2075 * Start by searching the device queue. If not found
2076 * there, check the pending_scb list. If not found
2077 * at all, and the system wanted us to just abort the
2078 * command, return success.
2079 */
2080 dev = scsi_transport_device_data(cmd->device);
2081
2082 if (dev == NULL) {
2083 /*
2084 * No target device for this command exists,
2085 * so we must not still own the command.
2086 */
2087 scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
2088 retval = SUCCESS;
2089 goto no_cmd;
2090 }
2091
2092 /*
2093 * See if we can find a matching cmd in the pending list.
2094 */
2095 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2096 if (pending_scb->io_ctx == cmd)
2097 break;
2098 }
2099
2100 if (pending_scb == NULL) {
2101 scmd_printk(KERN_INFO, cmd, "Command not found\n");
2102 goto no_cmd;
2103 }
2104
2105 if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
2106 /*
2107 * We can't queue two recovery actions using the same SCB
2108 */
2109 retval = FAILED;
2110 goto done;
2111 }
2112
2113 /*
2114 * Ensure that the card doesn't do anything
2115 * behind our back. Also make sure that we
2116 * didn't "just" miss an interrupt that would
2117 * affect this cmd.
2118 */
2119 was_paused = ahd_is_paused(ahd);
2120 ahd_pause_and_flushwork(ahd);
2121 paused = TRUE;
2122
2123 if ((pending_scb->flags & SCB_ACTIVE) == 0) {
2124 scmd_printk(KERN_INFO, cmd, "Command already completed\n");
2125 goto no_cmd;
2126 }
2127
2128 printf("%s: At time of recovery, card was %spaused\n",
2129 ahd_name(ahd), was_paused ? "" : "not ");
2130 ahd_dump_card_state(ahd);
2131
2132 disconnected = TRUE;
2133 if (ahd_search_qinfifo(ahd, cmd->device->id,
2134 cmd->device->channel + 'A',
2135 cmd->device->lun,
2136 pending_scb->hscb->tag,
2137 ROLE_INITIATOR, CAM_REQ_ABORTED,
2138 SEARCH_COMPLETE) > 0) {
2139 printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2140 ahd_name(ahd), cmd->device->channel,
2141 cmd->device->id, cmd->device->lun);
2142 retval = SUCCESS;
2143 goto done;
2144 }
2145
2146 saved_modes = ahd_save_modes(ahd);
2147 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2148 last_phase = ahd_inb(ahd, LASTPHASE);
2149 saved_scbptr = ahd_get_scbptr(ahd);
2150 active_scbptr = saved_scbptr;
2151 if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
2152 struct scb *bus_scb;
2153
2154 bus_scb = ahd_lookup_scb(ahd, active_scbptr);
2155 if (bus_scb == pending_scb)
2156 disconnected = FALSE;
2157 }
2158
2159 /*
2160 * At this point, pending_scb is the scb associated with the
2161 * passed in command. That command is currently active on the
2162 * bus or is in the disconnected state.
2163 */
2164 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2165 if (last_phase != P_BUSFREE
2166 && SCB_GET_TAG(pending_scb) == active_scbptr) {
2167
2168 /*
2169 * We're active on the bus, so assert ATN
2170 * and hope that the target responds.
2171 */
2172 pending_scb = ahd_lookup_scb(ahd, active_scbptr);
2173 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2174 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2175 ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
2176 scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
2177 wait = TRUE;
2178 } else if (disconnected) {
2179
2180 /*
2181 * Actually re-queue this SCB in an attempt
2182 * to select the device before it reconnects.
2183 */
2184 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2185 ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
2186 pending_scb->hscb->cdb_len = 0;
2187 pending_scb->hscb->task_attribute = 0;
2188 pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
2189
2190 if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
2191 /*
2192 * Mark the SCB has having an outstanding
2193 * task management function. Should the command
2194 * complete normally before the task management
2195 * function can be sent, the host will be notified
2196 * to abort our requeued SCB.
2197 */
2198 ahd_outb(ahd, SCB_TASK_MANAGEMENT,
2199 pending_scb->hscb->task_management);
2200 } else {
2201 /*
2202 * If non-packetized, set the MK_MESSAGE control
2203 * bit indicating that we desire to send a message.
2204 * We also set the disconnected flag since there is
2205 * no guarantee that our SCB control byte matches
2206 * the version on the card. We don't want the
2207 * sequencer to abort the command thinking an
2208 * unsolicited reselection occurred.
2209 */
2210 pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
2211
2212 /*
2213 * The sequencer will never re-reference the
2214 * in-core SCB. To make sure we are notified
2215 * during reslection, set the MK_MESSAGE flag in
2216 * the card's copy of the SCB.
2217 */
2218 ahd_outb(ahd, SCB_CONTROL,
2219 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
2220 }
2221
2222 /*
2223 * Clear out any entries in the QINFIFO first
2224 * so we are the next SCB for this target
2225 * to run.
2226 */
2227 ahd_search_qinfifo(ahd, cmd->device->id,
2228 cmd->device->channel + 'A', cmd->device->lun,
2229 SCB_LIST_NULL, ROLE_INITIATOR,
2230 CAM_REQUEUE_REQ, SEARCH_COMPLETE);
2231 ahd_qinfifo_requeue_tail(ahd, pending_scb);
2232 ahd_set_scbptr(ahd, saved_scbptr);
2233 ahd_print_path(ahd, pending_scb);
2234 printf("Device is disconnected, re-queuing SCB\n");
2235 wait = TRUE;
2236 } else {
2237 scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
2238 retval = FAILED;
2239 goto done;
2240 }
2241
2242 no_cmd:
2243 /*
2244 * Our assumption is that if we don't have the command, no
2245 * recovery action was required, so we return success. Again,
2246 * the semantics of the mid-layer recovery engine are not
2247 * well defined, so this may change in time.
2248 */
2249 retval = SUCCESS;
2250 done:
2251 if (paused)
2252 ahd_unpause(ahd);
2253 if (wait) {
2254 DECLARE_COMPLETION_ONSTACK(done);
2255
2256 ahd->platform_data->eh_done = &done;
2257 ahd_unlock(ahd, &flags);
2258
2259 printf("%s: Recovery code sleeping\n", ahd_name(ahd));
2260 if (!wait_for_completion_timeout(&done, 5 * HZ)) {
2261 ahd_lock(ahd, &flags);
2262 ahd->platform_data->eh_done = NULL;
2263 ahd_unlock(ahd, &flags);
2264 printf("%s: Timer Expired (active %d)\n",
2265 ahd_name(ahd), dev->active);
2266 retval = FAILED;
2267 }
2268 printf("Recovery code awake\n");
2269 } else
2270 ahd_unlock(ahd, &flags);
2271
2272 if (retval != SUCCESS)
2273 printf("%s: Command abort returning 0x%x\n",
2274 ahd_name(ahd), retval);
2275
2276 return retval;
2277 }
2278
2279 static void ahd_linux_set_width(struct scsi_target *starget, int width)
2280 {
2281 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2282 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2283 struct ahd_devinfo devinfo;
2284 unsigned long flags;
2285
2286 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2287 starget->channel + 'A', ROLE_INITIATOR);
2288 ahd_lock(ahd, &flags);
2289 ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
2290 ahd_unlock(ahd, &flags);
2291 }
2292
2293 static void ahd_linux_set_period(struct scsi_target *starget, int period)
2294 {
2295 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2296 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2297 struct ahd_tmode_tstate *tstate;
2298 struct ahd_initiator_tinfo *tinfo
2299 = ahd_fetch_transinfo(ahd,
2300 starget->channel + 'A',
2301 shost->this_id, starget->id, &tstate);
2302 struct ahd_devinfo devinfo;
2303 unsigned int ppr_options = tinfo->goal.ppr_options;
2304 unsigned int dt;
2305 unsigned long flags;
2306 unsigned long offset = tinfo->goal.offset;
2307
2308 #ifdef AHD_DEBUG
2309 if ((ahd_debug & AHD_SHOW_DV) != 0)
2310 printf("%s: set period to %d\n", ahd_name(ahd), period);
2311 #endif
2312 if (offset == 0)
2313 offset = MAX_OFFSET;
2314
2315 if (period < 8)
2316 period = 8;
2317 if (period < 10) {
2318 ppr_options |= MSG_EXT_PPR_DT_REQ;
2319 if (period == 8)
2320 ppr_options |= MSG_EXT_PPR_IU_REQ;
2321 }
2322
2323 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2324
2325 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2326 starget->channel + 'A', ROLE_INITIATOR);
2327
2328 /* all PPR requests apart from QAS require wide transfers */
2329 if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
2330 if (spi_width(starget) == 0)
2331 ppr_options &= MSG_EXT_PPR_QAS_REQ;
2332 }
2333
2334 ahd_find_syncrate(ahd, &period, &ppr_options,
2335 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2336
2337 ahd_lock(ahd, &flags);
2338 ahd_set_syncrate(ahd, &devinfo, period, offset,
2339 ppr_options, AHD_TRANS_GOAL, FALSE);
2340 ahd_unlock(ahd, &flags);
2341 }
2342
2343 static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
2344 {
2345 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2346 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2347 struct ahd_tmode_tstate *tstate;
2348 struct ahd_initiator_tinfo *tinfo
2349 = ahd_fetch_transinfo(ahd,
2350 starget->channel + 'A',
2351 shost->this_id, starget->id, &tstate);
2352 struct ahd_devinfo devinfo;
2353 unsigned int ppr_options = 0;
2354 unsigned int period = 0;
2355 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2356 unsigned long flags;
2357
2358 #ifdef AHD_DEBUG
2359 if ((ahd_debug & AHD_SHOW_DV) != 0)
2360 printf("%s: set offset to %d\n", ahd_name(ahd), offset);
2361 #endif
2362
2363 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2364 starget->channel + 'A', ROLE_INITIATOR);
2365 if (offset != 0) {
2366 period = tinfo->goal.period;
2367 ppr_options = tinfo->goal.ppr_options;
2368 ahd_find_syncrate(ahd, &period, &ppr_options,
2369 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2370 }
2371
2372 ahd_lock(ahd, &flags);
2373 ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
2374 AHD_TRANS_GOAL, FALSE);
2375 ahd_unlock(ahd, &flags);
2376 }
2377
2378 static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
2379 {
2380 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2381 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2382 struct ahd_tmode_tstate *tstate;
2383 struct ahd_initiator_tinfo *tinfo
2384 = ahd_fetch_transinfo(ahd,
2385 starget->channel + 'A',
2386 shost->this_id, starget->id, &tstate);
2387 struct ahd_devinfo devinfo;
2388 unsigned int ppr_options = tinfo->goal.ppr_options
2389 & ~MSG_EXT_PPR_DT_REQ;
2390 unsigned int period = tinfo->goal.period;
2391 unsigned int width = tinfo->goal.width;
2392 unsigned long flags;
2393
2394 #ifdef AHD_DEBUG
2395 if ((ahd_debug & AHD_SHOW_DV) != 0)
2396 printf("%s: %s DT\n", ahd_name(ahd),
2397 dt ? "enabling" : "disabling");
2398 #endif
2399 if (dt) {
2400 ppr_options |= MSG_EXT_PPR_DT_REQ;
2401 if (!width)
2402 ahd_linux_set_width(starget, 1);
2403 } else {
2404 if (period <= 9)
2405 period = 10; /* If resetting DT, period must be >= 25ns */
2406 /* IU is invalid without DT set */
2407 ppr_options &= ~MSG_EXT_PPR_IU_REQ;
2408 }
2409 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2410 starget->channel + 'A', ROLE_INITIATOR);
2411 ahd_find_syncrate(ahd, &period, &ppr_options,
2412 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2413
2414 ahd_lock(ahd, &flags);
2415 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2416 ppr_options, AHD_TRANS_GOAL, FALSE);
2417 ahd_unlock(ahd, &flags);
2418 }
2419
2420 static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
2421 {
2422 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2423 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2424 struct ahd_tmode_tstate *tstate;
2425 struct ahd_initiator_tinfo *tinfo
2426 = ahd_fetch_transinfo(ahd,
2427 starget->channel + 'A',
2428 shost->this_id, starget->id, &tstate);
2429 struct ahd_devinfo devinfo;
2430 unsigned int ppr_options = tinfo->goal.ppr_options
2431 & ~MSG_EXT_PPR_QAS_REQ;
2432 unsigned int period = tinfo->goal.period;
2433 unsigned int dt;
2434 unsigned long flags;
2435
2436 #ifdef AHD_DEBUG
2437 if ((ahd_debug & AHD_SHOW_DV) != 0)
2438 printf("%s: %s QAS\n", ahd_name(ahd),
2439 qas ? "enabling" : "disabling");
2440 #endif
2441
2442 if (qas) {
2443 ppr_options |= MSG_EXT_PPR_QAS_REQ;
2444 }
2445
2446 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2447
2448 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2449 starget->channel + 'A', ROLE_INITIATOR);
2450 ahd_find_syncrate(ahd, &period, &ppr_options,
2451 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2452
2453 ahd_lock(ahd, &flags);
2454 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2455 ppr_options, AHD_TRANS_GOAL, FALSE);
2456 ahd_unlock(ahd, &flags);
2457 }
2458
2459 static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
2460 {
2461 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2462 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2463 struct ahd_tmode_tstate *tstate;
2464 struct ahd_initiator_tinfo *tinfo
2465 = ahd_fetch_transinfo(ahd,
2466 starget->channel + 'A',
2467 shost->this_id, starget->id, &tstate);
2468 struct ahd_devinfo devinfo;
2469 unsigned int ppr_options = tinfo->goal.ppr_options
2470 & ~MSG_EXT_PPR_IU_REQ;
2471 unsigned int period = tinfo->goal.period;
2472 unsigned int dt;
2473 unsigned long flags;
2474
2475 #ifdef AHD_DEBUG
2476 if ((ahd_debug & AHD_SHOW_DV) != 0)
2477 printf("%s: %s IU\n", ahd_name(ahd),
2478 iu ? "enabling" : "disabling");
2479 #endif
2480
2481 if (iu) {
2482 ppr_options |= MSG_EXT_PPR_IU_REQ;
2483 ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
2484 }
2485
2486 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2487
2488 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2489 starget->channel + 'A', ROLE_INITIATOR);
2490 ahd_find_syncrate(ahd, &period, &ppr_options,
2491 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2492
2493 ahd_lock(ahd, &flags);
2494 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2495 ppr_options, AHD_TRANS_GOAL, FALSE);
2496 ahd_unlock(ahd, &flags);
2497 }
2498
2499 static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
2500 {
2501 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2502 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2503 struct ahd_tmode_tstate *tstate;
2504 struct ahd_initiator_tinfo *tinfo
2505 = ahd_fetch_transinfo(ahd,
2506 starget->channel + 'A',
2507 shost->this_id, starget->id, &tstate);
2508 struct ahd_devinfo devinfo;
2509 unsigned int ppr_options = tinfo->goal.ppr_options
2510 & ~MSG_EXT_PPR_RD_STRM;
2511 unsigned int period = tinfo->goal.period;
2512 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2513 unsigned long flags;
2514
2515 #ifdef AHD_DEBUG
2516 if ((ahd_debug & AHD_SHOW_DV) != 0)
2517 printf("%s: %s Read Streaming\n", ahd_name(ahd),
2518 rdstrm ? "enabling" : "disabling");
2519 #endif
2520
2521 if (rdstrm)
2522 ppr_options |= MSG_EXT_PPR_RD_STRM;
2523
2524 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2525 starget->channel + 'A', ROLE_INITIATOR);
2526 ahd_find_syncrate(ahd, &period, &ppr_options,
2527 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2528
2529 ahd_lock(ahd, &flags);
2530 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2531 ppr_options, AHD_TRANS_GOAL, FALSE);
2532 ahd_unlock(ahd, &flags);
2533 }
2534
2535 static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
2536 {
2537 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2538 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2539 struct ahd_tmode_tstate *tstate;
2540 struct ahd_initiator_tinfo *tinfo
2541 = ahd_fetch_transinfo(ahd,
2542 starget->channel + 'A',
2543 shost->this_id, starget->id, &tstate);
2544 struct ahd_devinfo devinfo;
2545 unsigned int ppr_options = tinfo->goal.ppr_options
2546 & ~MSG_EXT_PPR_WR_FLOW;
2547 unsigned int period = tinfo->goal.period;
2548 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2549 unsigned long flags;
2550
2551 #ifdef AHD_DEBUG
2552 if ((ahd_debug & AHD_SHOW_DV) != 0)
2553 printf("%s: %s Write Flow Control\n", ahd_name(ahd),
2554 wrflow ? "enabling" : "disabling");
2555 #endif
2556
2557 if (wrflow)
2558 ppr_options |= MSG_EXT_PPR_WR_FLOW;
2559
2560 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2561 starget->channel + 'A', ROLE_INITIATOR);
2562 ahd_find_syncrate(ahd, &period, &ppr_options,
2563 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2564
2565 ahd_lock(ahd, &flags);
2566 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2567 ppr_options, AHD_TRANS_GOAL, FALSE);
2568 ahd_unlock(ahd, &flags);
2569 }
2570
2571 static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
2572 {
2573 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2574 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2575 struct ahd_tmode_tstate *tstate;
2576 struct ahd_initiator_tinfo *tinfo
2577 = ahd_fetch_transinfo(ahd,
2578 starget->channel + 'A',
2579 shost->this_id, starget->id, &tstate);
2580 struct ahd_devinfo devinfo;
2581 unsigned int ppr_options = tinfo->goal.ppr_options
2582 & ~MSG_EXT_PPR_RTI;
2583 unsigned int period = tinfo->goal.period;
2584 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2585 unsigned long flags;
2586
2587 if ((ahd->features & AHD_RTI) == 0) {
2588 #ifdef AHD_DEBUG
2589 if ((ahd_debug & AHD_SHOW_DV) != 0)
2590 printf("%s: RTI not available\n", ahd_name(ahd));
2591 #endif
2592 return;
2593 }
2594
2595 #ifdef AHD_DEBUG
2596 if ((ahd_debug & AHD_SHOW_DV) != 0)
2597 printf("%s: %s RTI\n", ahd_name(ahd),
2598 rti ? "enabling" : "disabling");
2599 #endif
2600
2601 if (rti)
2602 ppr_options |= MSG_EXT_PPR_RTI;
2603
2604 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2605 starget->channel + 'A', ROLE_INITIATOR);
2606 ahd_find_syncrate(ahd, &period, &ppr_options,
2607 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2608
2609 ahd_lock(ahd, &flags);
2610 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2611 ppr_options, AHD_TRANS_GOAL, FALSE);
2612 ahd_unlock(ahd, &flags);
2613 }
2614
2615 static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
2616 {
2617 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2618 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2619 struct ahd_tmode_tstate *tstate;
2620 struct ahd_initiator_tinfo *tinfo
2621 = ahd_fetch_transinfo(ahd,
2622 starget->channel + 'A',
2623 shost->this_id, starget->id, &tstate);
2624 struct ahd_devinfo devinfo;
2625 unsigned int ppr_options = tinfo->goal.ppr_options
2626 & ~MSG_EXT_PPR_PCOMP_EN;
2627 unsigned int period = tinfo->goal.period;
2628 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2629 unsigned long flags;
2630
2631 #ifdef AHD_DEBUG
2632 if ((ahd_debug & AHD_SHOW_DV) != 0)
2633 printf("%s: %s Precompensation\n", ahd_name(ahd),
2634 pcomp ? "Enable" : "Disable");
2635 #endif
2636
2637 if (pcomp)
2638 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
2639
2640 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2641 starget->channel + 'A', ROLE_INITIATOR);
2642 ahd_find_syncrate(ahd, &period, &ppr_options,
2643 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2644
2645 ahd_lock(ahd, &flags);
2646 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2647 ppr_options, AHD_TRANS_GOAL, FALSE);
2648 ahd_unlock(ahd, &flags);
2649 }
2650
2651 static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
2652 {
2653 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2654 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2655 struct ahd_tmode_tstate *tstate;
2656 struct ahd_initiator_tinfo *tinfo
2657 = ahd_fetch_transinfo(ahd,
2658 starget->channel + 'A',
2659 shost->this_id, starget->id, &tstate);
2660 struct ahd_devinfo devinfo;
2661 unsigned int ppr_options = tinfo->goal.ppr_options
2662 & ~MSG_EXT_PPR_HOLD_MCS;
2663 unsigned int period = tinfo->goal.period;
2664 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2665 unsigned long flags;
2666
2667 if (hold)
2668 ppr_options |= MSG_EXT_PPR_HOLD_MCS;
2669
2670 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2671 starget->channel + 'A', ROLE_INITIATOR);
2672 ahd_find_syncrate(ahd, &period, &ppr_options,
2673 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2674
2675 ahd_lock(ahd, &flags);
2676 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2677 ppr_options, AHD_TRANS_GOAL, FALSE);
2678 ahd_unlock(ahd, &flags);
2679 }
2680
2681
2682
2683 static struct spi_function_template ahd_linux_transport_functions = {
2684 .set_offset = ahd_linux_set_offset,
2685 .show_offset = 1,
2686 .set_period = ahd_linux_set_period,
2687 .show_period = 1,
2688 .set_width = ahd_linux_set_width,
2689 .show_width = 1,
2690 .set_dt = ahd_linux_set_dt,
2691 .show_dt = 1,
2692 .set_iu = ahd_linux_set_iu,
2693 .show_iu = 1,
2694 .set_qas = ahd_linux_set_qas,
2695 .show_qas = 1,
2696 .set_rd_strm = ahd_linux_set_rd_strm,
2697 .show_rd_strm = 1,
2698 .set_wr_flow = ahd_linux_set_wr_flow,
2699 .show_wr_flow = 1,
2700 .set_rti = ahd_linux_set_rti,
2701 .show_rti = 1,
2702 .set_pcomp_en = ahd_linux_set_pcomp_en,
2703 .show_pcomp_en = 1,
2704 .set_hold_mcs = ahd_linux_set_hold_mcs,
2705 .show_hold_mcs = 1,
2706 };
2707
2708 static int __init
2709 ahd_linux_init(void)
2710 {
2711 int error = 0;
2712
2713 /*
2714 * If we've been passed any parameters, process them now.
2715 */
2716 if (aic79xx)
2717 aic79xx_setup(aic79xx);
2718
2719 ahd_linux_transport_template =
2720 spi_attach_transport(&ahd_linux_transport_functions);
2721 if (!ahd_linux_transport_template)
2722 return -ENODEV;
2723
2724 scsi_transport_reserve_device(ahd_linux_transport_template,
2725 sizeof(struct ahd_linux_device));
2726
2727 error = ahd_linux_pci_init();
2728 if (error)
2729 spi_release_transport(ahd_linux_transport_template);
2730 return error;
2731 }
2732
2733 static void __exit
2734 ahd_linux_exit(void)
2735 {
2736 ahd_linux_pci_exit();
2737 spi_release_transport(ahd_linux_transport_template);
2738 }
2739
2740 module_init(ahd_linux_init);
2741 module_exit(ahd_linux_exit);