drivers/scsi/arm/Kconfig

   1 #
   2 # SCSI driver configuration for Acorn
   3 #
   4 config SCSI_ACORNSCSI_3
   5         tristate "Acorn SCSI card (aka30) support"
   6         depends on ARCH_ACORN && SCSI
   7         select SCSI_SPI_ATTRS
   8         help
   9           This enables support for the Acorn SCSI card (aka30). If you have an
  10           Acorn system with one of these, say Y. If unsure, say N.
  11
  12 config SCSI_ACORNSCSI_TAGGED_QUEUE
  13         bool "Support SCSI 2 Tagged queueing"
  14         depends on SCSI_ACORNSCSI_3
  15         help
  16           Say Y here to enable tagged queuing support on the Acorn SCSI card.
  17
  18           This is a feature of SCSI-2 which improves performance: the host
  19           adapter can send several SCSI commands to a device's queue even if
  20           previous commands haven't finished yet. Some SCSI devices don't
  21           implement this properly, so the safe answer is N.
  22
  23 config SCSI_ACORNSCSI_SYNC
  24         bool "Support SCSI 2 Synchronous Transfers"
  25         depends on SCSI_ACORNSCSI_3
  26         help
  27           Say Y here to enable synchronous transfer negotiation with all
  28           targets on the Acorn SCSI card.
  29
  30           In general, this improves performance; however some SCSI devices
  31           don't implement it properly, so the safe answer is N.
  32
  33 config SCSI_ARXESCSI
  34         tristate "ARXE SCSI support"
  35         depends on ARCH_ACORN && SCSI
  36         help
  37           Around 1991, Arxe Systems Limited released a high density floppy
  38           disc interface for the Acorn Archimedes range, to allow the use of
  39           HD discs from the then new A5000 on earlier models. This interface
  40           was either sold on its own or with an integral SCSI controller.
  41           Technical details on this NCR53c94-based device are available at
  42           <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html>
  43           Say Y here to compile in support for the SCSI controller.
  44
  45 config SCSI_CUMANA_2
  46         tristate "CumanaSCSI II support"
  47         depends on ARCH_ACORN && SCSI
  48         help
  49           This enables support for the Cumana SCSI II card. If you have an
  50           Acorn system with one of these, say Y. If unsure, say N.
  51
  52 config SCSI_EESOXSCSI
  53         tristate "EESOX support"
  54         depends on ARCH_ACORN && SCSI
  55         help
  56           This enables support for the EESOX SCSI card. If you have an Acorn
  57           system with one of these, say Y, otherwise say N.
  58
  59 config SCSI_POWERTECSCSI
  60         tristate "PowerTec support"
  61         depends on ARCH_ACORN && SCSI
  62         help
  63           This enables support for the Powertec SCSI card on Acorn systems. If
  64           you have one of these, say Y. If unsure, say N.
  65
  66 comment "The following drivers are not fully supported"
  67         depends on ARCH_ACORN
  68
  69 config SCSI_CUMANA_1
  70         tristate "CumanaSCSI I support"
  71         depends on ARCH_ACORN && SCSI
  72         select SCSI_SPI_ATTRS
  73         help
  74           This enables support for the Cumana SCSI I card. If you have an
  75           Acorn system with one of these, say Y. If unsure, say N.
  76
  77 config SCSI_OAK1
  78         tristate "Oak SCSI support"
  79         depends on ARCH_ACORN && SCSI
  80         select SCSI_SPI_ATTRS
  81         help
  82           This enables support for the Oak SCSI card. If you have an Acorn
  83           system with one of these, say Y. If unsure, say N.
  84