]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/scsi/libfc/fc_fcp.c
ARM: at91: remove atmel_nand_data
[mirror_ubuntu-bionic-kernel.git] / drivers / scsi / libfc / fc_fcp.c
1 /*
2 * Copyright(c) 2007 Intel Corporation. All rights reserved.
3 * Copyright(c) 2008 Red Hat, Inc. All rights reserved.
4 * Copyright(c) 2008 Mike Christie
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
14 *
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Maintained at www.Open-FCoE.org
20 */
21
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37
38 #include <scsi/fc/fc_fc2.h>
39
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42
43 #include "fc_libfc.h"
44
45 static struct kmem_cache *scsi_pkt_cachep;
46
47 /* SRB state definitions */
48 #define FC_SRB_FREE 0 /* cmd is free */
49 #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */
50 #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */
51 #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */
52 #define FC_SRB_ABORTED (1 << 3) /* abort acknowledged */
53 #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */
54 #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */
56
57 #define FC_SRB_READ (1 << 1)
58 #define FC_SRB_WRITE (1 << 0)
59
60 /*
61 * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62 */
63 #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
68
69 /**
70 * struct fc_fcp_internal - FCP layer internal data
71 * @scsi_pkt_pool: Memory pool to draw FCP packets from
72 * @scsi_queue_lock: Protects the scsi_pkt_queue
73 * @scsi_pkt_queue: Current FCP packets
74 * @last_can_queue_ramp_down_time: ramp down time
75 * @last_can_queue_ramp_up_time: ramp up time
76 * @max_can_queue: max can_queue size
77 */
78 struct fc_fcp_internal {
79 mempool_t *scsi_pkt_pool;
80 spinlock_t scsi_queue_lock;
81 struct list_head scsi_pkt_queue;
82 unsigned long last_can_queue_ramp_down_time;
83 unsigned long last_can_queue_ramp_up_time;
84 int max_can_queue;
85 };
86
87 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
88
89 /*
90 * function prototypes
91 * FC scsi I/O related functions
92 */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109
110 /*
111 * command status codes
112 */
113 #define FC_COMPLETE 0
114 #define FC_CMD_ABORTED 1
115 #define FC_CMD_RESET 2
116 #define FC_CMD_PLOGO 3
117 #define FC_SNS_RCV 4
118 #define FC_TRANS_ERR 5
119 #define FC_DATA_OVRRUN 6
120 #define FC_DATA_UNDRUN 7
121 #define FC_ERROR 8
122 #define FC_HRD_ERROR 9
123 #define FC_CRC_ERROR 10
124 #define FC_TIMED_OUT 11
125 #define FC_TRANS_RESET 12
126
127 /*
128 * Error recovery timeout values.
129 */
130 #define FC_SCSI_TM_TOV (10 * HZ)
131 #define FC_HOST_RESET_TIMEOUT (30 * HZ)
132 #define FC_CAN_QUEUE_PERIOD (60 * HZ)
133
134 #define FC_MAX_ERROR_CNT 5
135 #define FC_MAX_RECOV_RETRY 3
136
137 #define FC_FCP_DFLT_QUEUE_DEPTH 32
138
139 /**
140 * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
141 * @lport: The local port that the FCP packet is for
142 * @gfp: GFP flags for allocation
143 *
144 * Return value: fcp_pkt structure or null on allocation failure.
145 * Context: Can be called from process context, no lock is required.
146 */
147 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
148 {
149 struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
150 struct fc_fcp_pkt *fsp;
151
152 fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
153 if (fsp) {
154 memset(fsp, 0, sizeof(*fsp));
155 fsp->lp = lport;
156 fsp->xfer_ddp = FC_XID_UNKNOWN;
157 refcount_set(&fsp->ref_cnt, 1);
158 init_timer(&fsp->timer);
159 fsp->timer.data = (unsigned long)fsp;
160 INIT_LIST_HEAD(&fsp->list);
161 spin_lock_init(&fsp->scsi_pkt_lock);
162 } else {
163 per_cpu_ptr(lport->stats, get_cpu())->FcpPktAllocFails++;
164 put_cpu();
165 }
166 return fsp;
167 }
168
169 /**
170 * fc_fcp_pkt_release() - Release hold on a fcp_pkt
171 * @fsp: The FCP packet to be released
172 *
173 * Context: Can be called from process or interrupt context,
174 * no lock is required.
175 */
176 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
177 {
178 if (refcount_dec_and_test(&fsp->ref_cnt)) {
179 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
180
181 mempool_free(fsp, si->scsi_pkt_pool);
182 }
183 }
184
185 /**
186 * fc_fcp_pkt_hold() - Hold a fcp_pkt
187 * @fsp: The FCP packet to be held
188 */
189 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
190 {
191 refcount_inc(&fsp->ref_cnt);
192 }
193
194 /**
195 * fc_fcp_pkt_destroy() - Release hold on a fcp_pkt
196 * @seq: The sequence that the FCP packet is on (required by destructor API)
197 * @fsp: The FCP packet to be released
198 *
199 * This routine is called by a destructor callback in the fc_exch_seq_send()
200 * routine of the libfc Transport Template. The 'struct fc_seq' is a required
201 * argument even though it is not used by this routine.
202 *
203 * Context: No locking required.
204 */
205 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
206 {
207 fc_fcp_pkt_release(fsp);
208 }
209
210 /**
211 * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
212 * @fsp: The FCP packet to be locked and incremented
213 *
214 * We should only return error if we return a command to SCSI-ml before
215 * getting a response. This can happen in cases where we send a abort, but
216 * do not wait for the response and the abort and command can be passing
217 * each other on the wire/network-layer.
218 *
219 * Note: this function locks the packet and gets a reference to allow
220 * callers to call the completion function while the lock is held and
221 * not have to worry about the packets refcount.
222 *
223 * TODO: Maybe we should just have callers grab/release the lock and
224 * have a function that they call to verify the fsp and grab a ref if
225 * needed.
226 */
227 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
228 {
229 spin_lock_bh(&fsp->scsi_pkt_lock);
230 if (fsp->state & FC_SRB_COMPL) {
231 spin_unlock_bh(&fsp->scsi_pkt_lock);
232 return -EPERM;
233 }
234
235 fc_fcp_pkt_hold(fsp);
236 return 0;
237 }
238
239 /**
240 * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
241 * reference count
242 * @fsp: The FCP packet to be unlocked and decremented
243 */
244 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
245 {
246 spin_unlock_bh(&fsp->scsi_pkt_lock);
247 fc_fcp_pkt_release(fsp);
248 }
249
250 /**
251 * fc_fcp_timer_set() - Start a timer for a fcp_pkt
252 * @fsp: The FCP packet to start a timer for
253 * @delay: The timeout period in jiffies
254 */
255 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
256 {
257 if (!(fsp->state & FC_SRB_COMPL)) {
258 mod_timer(&fsp->timer, jiffies + delay);
259 fsp->timer_delay = delay;
260 }
261 }
262
263 static void fc_fcp_abort_done(struct fc_fcp_pkt *fsp)
264 {
265 fsp->state |= FC_SRB_ABORTED;
266 fsp->state &= ~FC_SRB_ABORT_PENDING;
267
268 if (fsp->wait_for_comp)
269 complete(&fsp->tm_done);
270 else
271 fc_fcp_complete_locked(fsp);
272 }
273
274 /**
275 * fc_fcp_send_abort() - Send an abort for exchanges associated with a
276 * fcp_pkt
277 * @fsp: The FCP packet to abort exchanges on
278 */
279 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
280 {
281 int rc;
282
283 if (!fsp->seq_ptr)
284 return -EINVAL;
285
286 per_cpu_ptr(fsp->lp->stats, get_cpu())->FcpPktAborts++;
287 put_cpu();
288
289 fsp->state |= FC_SRB_ABORT_PENDING;
290 rc = fc_seq_exch_abort(fsp->seq_ptr, 0);
291 /*
292 * fc_seq_exch_abort() might return -ENXIO if
293 * the sequence is already completed
294 */
295 if (rc == -ENXIO) {
296 fc_fcp_abort_done(fsp);
297 rc = 0;
298 }
299 return rc;
300 }
301
302 /**
303 * fc_fcp_retry_cmd() - Retry a fcp_pkt
304 * @fsp: The FCP packet to be retried
305 *
306 * Sets the status code to be FC_ERROR and then calls
307 * fc_fcp_complete_locked() which in turn calls fc_io_compl().
308 * fc_io_compl() will notify the SCSI-ml that the I/O is done.
309 * The SCSI-ml will retry the command.
310 */
311 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp, int status_code)
312 {
313 if (fsp->seq_ptr) {
314 fc_exch_done(fsp->seq_ptr);
315 fsp->seq_ptr = NULL;
316 }
317
318 fsp->state &= ~FC_SRB_ABORT_PENDING;
319 fsp->io_status = 0;
320 fsp->status_code = status_code;
321 fc_fcp_complete_locked(fsp);
322 }
323
324 /**
325 * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
326 * @fsp: The FCP packet that will manage the DDP frames
327 * @xid: The XID that will be used for the DDP exchange
328 */
329 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
330 {
331 struct fc_lport *lport;
332
333 lport = fsp->lp;
334 if ((fsp->req_flags & FC_SRB_READ) &&
335 (lport->lro_enabled) && (lport->tt.ddp_setup)) {
336 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
337 scsi_sg_count(fsp->cmd)))
338 fsp->xfer_ddp = xid;
339 }
340 }
341
342 /**
343 * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
344 * DDP related resources for a fcp_pkt
345 * @fsp: The FCP packet that DDP had been used on
346 */
347 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
348 {
349 struct fc_lport *lport;
350
351 if (!fsp)
352 return;
353
354 if (fsp->xfer_ddp == FC_XID_UNKNOWN)
355 return;
356
357 lport = fsp->lp;
358 if (lport->tt.ddp_done) {
359 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
360 fsp->xfer_ddp = FC_XID_UNKNOWN;
361 }
362 }
363
364 /**
365 * fc_fcp_can_queue_ramp_up() - increases can_queue
366 * @lport: lport to ramp up can_queue
367 */
368 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
369 {
370 struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
371 unsigned long flags;
372 int can_queue;
373
374 spin_lock_irqsave(lport->host->host_lock, flags);
375
376 if (si->last_can_queue_ramp_up_time &&
377 (time_before(jiffies, si->last_can_queue_ramp_up_time +
378 FC_CAN_QUEUE_PERIOD)))
379 goto unlock;
380
381 if (time_before(jiffies, si->last_can_queue_ramp_down_time +
382 FC_CAN_QUEUE_PERIOD))
383 goto unlock;
384
385 si->last_can_queue_ramp_up_time = jiffies;
386
387 can_queue = lport->host->can_queue << 1;
388 if (can_queue >= si->max_can_queue) {
389 can_queue = si->max_can_queue;
390 si->last_can_queue_ramp_down_time = 0;
391 }
392 lport->host->can_queue = can_queue;
393 shost_printk(KERN_ERR, lport->host, "libfc: increased "
394 "can_queue to %d.\n", can_queue);
395
396 unlock:
397 spin_unlock_irqrestore(lport->host->host_lock, flags);
398 }
399
400 /**
401 * fc_fcp_can_queue_ramp_down() - reduces can_queue
402 * @lport: lport to reduce can_queue
403 *
404 * If we are getting memory allocation failures, then we may
405 * be trying to execute too many commands. We let the running
406 * commands complete or timeout, then try again with a reduced
407 * can_queue. Eventually we will hit the point where we run
408 * on all reserved structs.
409 */
410 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
411 {
412 struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
413 unsigned long flags;
414 int can_queue;
415
416 spin_lock_irqsave(lport->host->host_lock, flags);
417
418 if (si->last_can_queue_ramp_down_time &&
419 (time_before(jiffies, si->last_can_queue_ramp_down_time +
420 FC_CAN_QUEUE_PERIOD)))
421 goto unlock;
422
423 si->last_can_queue_ramp_down_time = jiffies;
424
425 can_queue = lport->host->can_queue;
426 can_queue >>= 1;
427 if (!can_queue)
428 can_queue = 1;
429 lport->host->can_queue = can_queue;
430
431 unlock:
432 spin_unlock_irqrestore(lport->host->host_lock, flags);
433 }
434
435 /*
436 * fc_fcp_frame_alloc() - Allocates fc_frame structure and buffer.
437 * @lport: fc lport struct
438 * @len: payload length
439 *
440 * Allocates fc_frame structure and buffer but if fails to allocate
441 * then reduce can_queue.
442 */
443 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
444 size_t len)
445 {
446 struct fc_frame *fp;
447
448 fp = fc_frame_alloc(lport, len);
449 if (likely(fp))
450 return fp;
451
452 per_cpu_ptr(lport->stats, get_cpu())->FcpFrameAllocFails++;
453 put_cpu();
454 /* error case */
455 fc_fcp_can_queue_ramp_down(lport);
456 shost_printk(KERN_ERR, lport->host,
457 "libfc: Could not allocate frame, "
458 "reducing can_queue to %d.\n", lport->host->can_queue);
459 return NULL;
460 }
461
462 /**
463 * get_fsp_rec_tov() - Helper function to get REC_TOV
464 * @fsp: the FCP packet
465 *
466 * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
467 */
468 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
469 {
470 struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
471 unsigned int e_d_tov = FC_DEF_E_D_TOV;
472
473 if (rpriv && rpriv->e_d_tov > e_d_tov)
474 e_d_tov = rpriv->e_d_tov;
475 return msecs_to_jiffies(e_d_tov) + HZ;
476 }
477
478 /**
479 * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
480 * @fsp: The FCP packet the data is on
481 * @fp: The data frame
482 */
483 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
484 {
485 struct scsi_cmnd *sc = fsp->cmd;
486 struct fc_lport *lport = fsp->lp;
487 struct fc_stats *stats;
488 struct fc_frame_header *fh;
489 size_t start_offset;
490 size_t offset;
491 u32 crc;
492 u32 copy_len = 0;
493 size_t len;
494 void *buf;
495 struct scatterlist *sg;
496 u32 nents;
497 u8 host_bcode = FC_COMPLETE;
498
499 fh = fc_frame_header_get(fp);
500 offset = ntohl(fh->fh_parm_offset);
501 start_offset = offset;
502 len = fr_len(fp) - sizeof(*fh);
503 buf = fc_frame_payload_get(fp, 0);
504
505 /*
506 * if this I/O is ddped then clear it and initiate recovery since data
507 * frames are expected to be placed directly in that case.
508 *
509 * Indicate error to scsi-ml because something went wrong with the
510 * ddp handling to get us here.
511 */
512 if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
513 fc_fcp_ddp_done(fsp);
514 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
515 host_bcode = FC_ERROR;
516 goto err;
517 }
518 if (offset + len > fsp->data_len) {
519 /* this should never happen */
520 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
521 fc_frame_crc_check(fp))
522 goto crc_err;
523 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
524 "data_len %x\n", len, offset, fsp->data_len);
525
526 /* Data is corrupted indicate scsi-ml should retry */
527 host_bcode = FC_DATA_OVRRUN;
528 goto err;
529 }
530 if (offset != fsp->xfer_len)
531 fsp->state |= FC_SRB_DISCONTIG;
532
533 sg = scsi_sglist(sc);
534 nents = scsi_sg_count(sc);
535
536 if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
537 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
538 &offset, NULL);
539 } else {
540 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
541 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
542 &offset, &crc);
543 buf = fc_frame_payload_get(fp, 0);
544 if (len % 4)
545 crc = crc32(crc, buf + len, 4 - (len % 4));
546
547 if (~crc != le32_to_cpu(fr_crc(fp))) {
548 crc_err:
549 stats = per_cpu_ptr(lport->stats, get_cpu());
550 stats->ErrorFrames++;
551 /* per cpu count, not total count, but OK for limit */
552 if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
553 printk(KERN_WARNING "libfc: CRC error on data "
554 "frame for port (%6.6x)\n",
555 lport->port_id);
556 put_cpu();
557 /*
558 * Assume the frame is total garbage.
559 * We may have copied it over the good part
560 * of the buffer.
561 * If so, we need to retry the entire operation.
562 * Otherwise, ignore it.
563 */
564 if (fsp->state & FC_SRB_DISCONTIG) {
565 host_bcode = FC_CRC_ERROR;
566 goto err;
567 }
568 return;
569 }
570 }
571
572 if (fsp->xfer_contig_end == start_offset)
573 fsp->xfer_contig_end += copy_len;
574 fsp->xfer_len += copy_len;
575
576 /*
577 * In the very rare event that this data arrived after the response
578 * and completes the transfer, call the completion handler.
579 */
580 if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
581 fsp->xfer_len == fsp->data_len - fsp->scsi_resid) {
582 FC_FCP_DBG( fsp, "complete out-of-order sequence\n" );
583 fc_fcp_complete_locked(fsp);
584 }
585 return;
586 err:
587 fc_fcp_recovery(fsp, host_bcode);
588 }
589
590 /**
591 * fc_fcp_send_data() - Send SCSI data to a target
592 * @fsp: The FCP packet the data is on
593 * @sp: The sequence the data is to be sent on
594 * @offset: The starting offset for this data request
595 * @seq_blen: The burst length for this data request
596 *
597 * Called after receiving a Transfer Ready data descriptor.
598 * If the LLD is capable of sequence offload then send down the
599 * seq_blen amount of data in single frame, otherwise send
600 * multiple frames of the maximum frame payload supported by
601 * the target port.
602 */
603 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
604 size_t offset, size_t seq_blen)
605 {
606 struct fc_exch *ep;
607 struct scsi_cmnd *sc;
608 struct scatterlist *sg;
609 struct fc_frame *fp = NULL;
610 struct fc_lport *lport = fsp->lp;
611 struct page *page;
612 size_t remaining;
613 size_t t_blen;
614 size_t tlen;
615 size_t sg_bytes;
616 size_t frame_offset, fh_parm_offset;
617 size_t off;
618 int error;
619 void *data = NULL;
620 void *page_addr;
621 int using_sg = lport->sg_supp;
622 u32 f_ctl;
623
624 WARN_ON(seq_blen <= 0);
625 if (unlikely(offset + seq_blen > fsp->data_len)) {
626 /* this should never happen */
627 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
628 "offset %zx\n", seq_blen, offset);
629 fc_fcp_send_abort(fsp);
630 return 0;
631 } else if (offset != fsp->xfer_len) {
632 /* Out of Order Data Request - no problem, but unexpected. */
633 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
634 "seq_blen %zx offset %zx\n", seq_blen, offset);
635 }
636
637 /*
638 * if LLD is capable of seq_offload then set transport
639 * burst length (t_blen) to seq_blen, otherwise set t_blen
640 * to max FC frame payload previously set in fsp->max_payload.
641 */
642 t_blen = fsp->max_payload;
643 if (lport->seq_offload) {
644 t_blen = min(seq_blen, (size_t)lport->lso_max);
645 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
646 fsp, seq_blen, lport->lso_max, t_blen);
647 }
648
649 if (t_blen > 512)
650 t_blen &= ~(512 - 1); /* round down to block size */
651 sc = fsp->cmd;
652
653 remaining = seq_blen;
654 fh_parm_offset = frame_offset = offset;
655 tlen = 0;
656 seq = fc_seq_start_next(seq);
657 f_ctl = FC_FC_REL_OFF;
658 WARN_ON(!seq);
659
660 sg = scsi_sglist(sc);
661
662 while (remaining > 0 && sg) {
663 if (offset >= sg->length) {
664 offset -= sg->length;
665 sg = sg_next(sg);
666 continue;
667 }
668 if (!fp) {
669 tlen = min(t_blen, remaining);
670
671 /*
672 * TODO. Temporary workaround. fc_seq_send() can't
673 * handle odd lengths in non-linear skbs.
674 * This will be the final fragment only.
675 */
676 if (tlen % 4)
677 using_sg = 0;
678 fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
679 if (!fp)
680 return -ENOMEM;
681
682 data = fc_frame_header_get(fp) + 1;
683 fh_parm_offset = frame_offset;
684 fr_max_payload(fp) = fsp->max_payload;
685 }
686
687 off = offset + sg->offset;
688 sg_bytes = min(tlen, sg->length - offset);
689 sg_bytes = min(sg_bytes,
690 (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
691 page = sg_page(sg) + (off >> PAGE_SHIFT);
692 if (using_sg) {
693 get_page(page);
694 skb_fill_page_desc(fp_skb(fp),
695 skb_shinfo(fp_skb(fp))->nr_frags,
696 page, off & ~PAGE_MASK, sg_bytes);
697 fp_skb(fp)->data_len += sg_bytes;
698 fr_len(fp) += sg_bytes;
699 fp_skb(fp)->truesize += PAGE_SIZE;
700 } else {
701 /*
702 * The scatterlist item may be bigger than PAGE_SIZE,
703 * but we must not cross pages inside the kmap.
704 */
705 page_addr = kmap_atomic(page);
706 memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
707 sg_bytes);
708 kunmap_atomic(page_addr);
709 data += sg_bytes;
710 }
711 offset += sg_bytes;
712 frame_offset += sg_bytes;
713 tlen -= sg_bytes;
714 remaining -= sg_bytes;
715
716 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
717 (tlen))
718 continue;
719
720 /*
721 * Send sequence with transfer sequence initiative in case
722 * this is last FCP frame of the sequence.
723 */
724 if (remaining == 0)
725 f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
726
727 ep = fc_seq_exch(seq);
728 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
729 FC_TYPE_FCP, f_ctl, fh_parm_offset);
730
731 /*
732 * send fragment using for a sequence.
733 */
734 error = fc_seq_send(lport, seq, fp);
735 if (error) {
736 WARN_ON(1); /* send error should be rare */
737 return error;
738 }
739 fp = NULL;
740 }
741 fsp->xfer_len += seq_blen; /* premature count? */
742 return 0;
743 }
744
745 /**
746 * fc_fcp_abts_resp() - Receive an ABTS response
747 * @fsp: The FCP packet that is being aborted
748 * @fp: The response frame
749 */
750 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
751 {
752 int ba_done = 1;
753 struct fc_ba_rjt *brp;
754 struct fc_frame_header *fh;
755
756 fh = fc_frame_header_get(fp);
757 switch (fh->fh_r_ctl) {
758 case FC_RCTL_BA_ACC:
759 break;
760 case FC_RCTL_BA_RJT:
761 brp = fc_frame_payload_get(fp, sizeof(*brp));
762 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
763 break;
764 /* fall thru */
765 default:
766 /*
767 * we will let the command timeout
768 * and scsi-ml recover in this case,
769 * therefore cleared the ba_done flag.
770 */
771 ba_done = 0;
772 }
773
774 if (ba_done)
775 fc_fcp_abort_done(fsp);
776 }
777
778 /**
779 * fc_fcp_recv() - Receive an FCP frame
780 * @seq: The sequence the frame is on
781 * @fp: The received frame
782 * @arg: The related FCP packet
783 *
784 * Context: Called from Soft IRQ context. Can not be called
785 * holding the FCP packet list lock.
786 */
787 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
788 {
789 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
790 struct fc_lport *lport = fsp->lp;
791 struct fc_frame_header *fh;
792 struct fcp_txrdy *dd;
793 u8 r_ctl;
794 int rc = 0;
795
796 if (IS_ERR(fp)) {
797 fc_fcp_error(fsp, fp);
798 return;
799 }
800
801 fh = fc_frame_header_get(fp);
802 r_ctl = fh->fh_r_ctl;
803
804 if (lport->state != LPORT_ST_READY) {
805 FC_FCP_DBG(fsp, "lport state %d, ignoring r_ctl %x\n",
806 lport->state, r_ctl);
807 goto out;
808 }
809 if (fc_fcp_lock_pkt(fsp))
810 goto out;
811
812 if (fh->fh_type == FC_TYPE_BLS) {
813 fc_fcp_abts_resp(fsp, fp);
814 goto unlock;
815 }
816
817 if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) {
818 FC_FCP_DBG(fsp, "command aborted, ignoring r_ctl %x\n", r_ctl);
819 goto unlock;
820 }
821
822 if (r_ctl == FC_RCTL_DD_DATA_DESC) {
823 /*
824 * received XFER RDY from the target
825 * need to send data to the target
826 */
827 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
828 dd = fc_frame_payload_get(fp, sizeof(*dd));
829 WARN_ON(!dd);
830
831 rc = fc_fcp_send_data(fsp, seq,
832 (size_t) ntohl(dd->ft_data_ro),
833 (size_t) ntohl(dd->ft_burst_len));
834 if (!rc)
835 seq->rec_data = fsp->xfer_len;
836 } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
837 /*
838 * received a DATA frame
839 * next we will copy the data to the system buffer
840 */
841 WARN_ON(fr_len(fp) < sizeof(*fh)); /* len may be 0 */
842 fc_fcp_recv_data(fsp, fp);
843 seq->rec_data = fsp->xfer_contig_end;
844 } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
845 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
846
847 fc_fcp_resp(fsp, fp);
848 } else {
849 FC_FCP_DBG(fsp, "unexpected frame. r_ctl %x\n", r_ctl);
850 }
851 unlock:
852 fc_fcp_unlock_pkt(fsp);
853 out:
854 fc_frame_free(fp);
855 }
856
857 /**
858 * fc_fcp_resp() - Handler for FCP responses
859 * @fsp: The FCP packet the response is for
860 * @fp: The response frame
861 */
862 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
863 {
864 struct fc_frame_header *fh;
865 struct fcp_resp *fc_rp;
866 struct fcp_resp_ext *rp_ex;
867 struct fcp_resp_rsp_info *fc_rp_info;
868 u32 plen;
869 u32 expected_len;
870 u32 respl = 0;
871 u32 snsl = 0;
872 u8 flags = 0;
873
874 plen = fr_len(fp);
875 fh = (struct fc_frame_header *)fr_hdr(fp);
876 if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
877 goto len_err;
878 plen -= sizeof(*fh);
879 fc_rp = (struct fcp_resp *)(fh + 1);
880 fsp->cdb_status = fc_rp->fr_status;
881 flags = fc_rp->fr_flags;
882 fsp->scsi_comp_flags = flags;
883 expected_len = fsp->data_len;
884
885 /* if ddp, update xfer len */
886 fc_fcp_ddp_done(fsp);
887
888 if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
889 rp_ex = (void *)(fc_rp + 1);
890 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
891 if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
892 goto len_err;
893 fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
894 if (flags & FCP_RSP_LEN_VAL) {
895 respl = ntohl(rp_ex->fr_rsp_len);
896 if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
897 (respl != FCP_RESP_RSP_INFO_LEN8))
898 goto len_err;
899 if (fsp->wait_for_comp) {
900 /* Abuse cdb_status for rsp code */
901 fsp->cdb_status = fc_rp_info->rsp_code;
902 complete(&fsp->tm_done);
903 /*
904 * tmfs will not have any scsi cmd so
905 * exit here
906 */
907 return;
908 }
909 }
910 if (flags & FCP_SNS_LEN_VAL) {
911 snsl = ntohl(rp_ex->fr_sns_len);
912 if (snsl > SCSI_SENSE_BUFFERSIZE)
913 snsl = SCSI_SENSE_BUFFERSIZE;
914 memcpy(fsp->cmd->sense_buffer,
915 (char *)fc_rp_info + respl, snsl);
916 }
917 }
918 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
919 if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
920 goto len_err;
921 if (flags & FCP_RESID_UNDER) {
922 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
923 /*
924 * The cmnd->underflow is the minimum number of
925 * bytes that must be transferred for this
926 * command. Provided a sense condition is not
927 * present, make sure the actual amount
928 * transferred is at least the underflow value
929 * or fail.
930 */
931 if (!(flags & FCP_SNS_LEN_VAL) &&
932 (fc_rp->fr_status == 0) &&
933 (scsi_bufflen(fsp->cmd) -
934 fsp->scsi_resid) < fsp->cmd->underflow)
935 goto err;
936 expected_len -= fsp->scsi_resid;
937 } else {
938 fsp->status_code = FC_ERROR;
939 }
940 }
941 }
942 fsp->state |= FC_SRB_RCV_STATUS;
943
944 /*
945 * Check for missing or extra data frames.
946 */
947 if (unlikely(fsp->cdb_status == SAM_STAT_GOOD &&
948 fsp->xfer_len != expected_len)) {
949 if (fsp->xfer_len < expected_len) {
950 /*
951 * Some data may be queued locally,
952 * Wait a at least one jiffy to see if it is delivered.
953 * If this expires without data, we may do SRR.
954 */
955 if (fsp->lp->qfull) {
956 FC_FCP_DBG(fsp, "tgt %6.6x queue busy retry\n",
957 fsp->rport->port_id);
958 return;
959 }
960 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx data underrun "
961 "len %x, data len %x\n",
962 fsp->rport->port_id,
963 fsp->xfer_len, expected_len, fsp->data_len);
964 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
965 return;
966 }
967 fsp->status_code = FC_DATA_OVRRUN;
968 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
969 "len %x, data len %x\n",
970 fsp->rport->port_id,
971 fsp->xfer_len, expected_len, fsp->data_len);
972 }
973 fc_fcp_complete_locked(fsp);
974 return;
975
976 len_err:
977 FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
978 "snsl %u\n", flags, fr_len(fp), respl, snsl);
979 err:
980 fsp->status_code = FC_ERROR;
981 fc_fcp_complete_locked(fsp);
982 }
983
984 /**
985 * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
986 * fcp_pkt lock held
987 * @fsp: The FCP packet to be completed
988 *
989 * This function may sleep if a timer is pending. The packet lock must be
990 * held, and the host lock must not be held.
991 */
992 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
993 {
994 struct fc_lport *lport = fsp->lp;
995 struct fc_seq *seq;
996 struct fc_exch *ep;
997 u32 f_ctl;
998
999 if (fsp->state & FC_SRB_ABORT_PENDING)
1000 return;
1001
1002 if (fsp->state & FC_SRB_ABORTED) {
1003 if (!fsp->status_code)
1004 fsp->status_code = FC_CMD_ABORTED;
1005 } else {
1006 /*
1007 * Test for transport underrun, independent of response
1008 * underrun status.
1009 */
1010 if (fsp->cdb_status == SAM_STAT_GOOD &&
1011 fsp->xfer_len < fsp->data_len && !fsp->io_status &&
1012 (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
1013 fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
1014 FC_FCP_DBG(fsp, "data underrun, xfer %zx data %x\n",
1015 fsp->xfer_len, fsp->data_len);
1016 fsp->status_code = FC_DATA_UNDRUN;
1017 }
1018 }
1019
1020 seq = fsp->seq_ptr;
1021 if (seq) {
1022 fsp->seq_ptr = NULL;
1023 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
1024 struct fc_frame *conf_frame;
1025 struct fc_seq *csp;
1026
1027 csp = fc_seq_start_next(seq);
1028 conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
1029 if (conf_frame) {
1030 f_ctl = FC_FC_SEQ_INIT;
1031 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
1032 ep = fc_seq_exch(seq);
1033 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
1034 ep->did, ep->sid,
1035 FC_TYPE_FCP, f_ctl, 0);
1036 fc_seq_send(lport, csp, conf_frame);
1037 }
1038 }
1039 fc_exch_done(seq);
1040 }
1041 /*
1042 * Some resets driven by SCSI are not I/Os and do not have
1043 * SCSI commands associated with the requests. We should not
1044 * call I/O completion if we do not have a SCSI command.
1045 */
1046 if (fsp->cmd)
1047 fc_io_compl(fsp);
1048 }
1049
1050 /**
1051 * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
1052 * @fsp: The FCP packet whose exchanges should be canceled
1053 * @error: The reason for the cancellation
1054 */
1055 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1056 {
1057 if (fsp->seq_ptr) {
1058 fc_exch_done(fsp->seq_ptr);
1059 fsp->seq_ptr = NULL;
1060 }
1061 fsp->status_code = error;
1062 }
1063
1064 /**
1065 * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1066 * @lport: The local port whose exchanges should be canceled
1067 * @id: The target's ID
1068 * @lun: The LUN
1069 * @error: The reason for cancellation
1070 *
1071 * If lun or id is -1, they are ignored.
1072 */
1073 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1074 unsigned int lun, int error)
1075 {
1076 struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1077 struct fc_fcp_pkt *fsp;
1078 struct scsi_cmnd *sc_cmd;
1079 unsigned long flags;
1080
1081 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1082 restart:
1083 list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1084 sc_cmd = fsp->cmd;
1085 if (id != -1 && scmd_id(sc_cmd) != id)
1086 continue;
1087
1088 if (lun != -1 && sc_cmd->device->lun != lun)
1089 continue;
1090
1091 fc_fcp_pkt_hold(fsp);
1092 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1093
1094 spin_lock_bh(&fsp->scsi_pkt_lock);
1095 if (!(fsp->state & FC_SRB_COMPL)) {
1096 fsp->state |= FC_SRB_COMPL;
1097 /*
1098 * TODO: dropping scsi_pkt_lock and then reacquiring
1099 * again around fc_fcp_cleanup_cmd() is required,
1100 * since fc_fcp_cleanup_cmd() calls into
1101 * fc_seq_set_resp() and that func preempts cpu using
1102 * schedule. May be schedule and related code should be
1103 * removed instead of unlocking here to avoid scheduling
1104 * while atomic bug.
1105 */
1106 spin_unlock_bh(&fsp->scsi_pkt_lock);
1107
1108 fc_fcp_cleanup_cmd(fsp, error);
1109
1110 spin_lock_bh(&fsp->scsi_pkt_lock);
1111 fc_io_compl(fsp);
1112 }
1113 spin_unlock_bh(&fsp->scsi_pkt_lock);
1114
1115 fc_fcp_pkt_release(fsp);
1116 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1117 /*
1118 * while we dropped the lock multiple pkts could
1119 * have been released, so we have to start over.
1120 */
1121 goto restart;
1122 }
1123 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1124 }
1125
1126 /**
1127 * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1128 * @lport: The local port whose exchanges are to be aborted
1129 */
1130 static void fc_fcp_abort_io(struct fc_lport *lport)
1131 {
1132 fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1133 }
1134
1135 /**
1136 * fc_fcp_pkt_send() - Send a fcp_pkt
1137 * @lport: The local port to send the FCP packet on
1138 * @fsp: The FCP packet to send
1139 *
1140 * Return: Zero for success and -1 for failure
1141 * Locks: Called without locks held
1142 */
1143 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1144 {
1145 struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1146 unsigned long flags;
1147 int rc;
1148
1149 fsp->cmd->SCp.ptr = (char *)fsp;
1150 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1151 fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1152
1153 int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1154 memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1155
1156 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1157 list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1158 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1159 rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1160 if (unlikely(rc)) {
1161 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1162 fsp->cmd->SCp.ptr = NULL;
1163 list_del(&fsp->list);
1164 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1165 }
1166
1167 return rc;
1168 }
1169
1170 /**
1171 * fc_fcp_cmd_send() - Send a FCP command
1172 * @lport: The local port to send the command on
1173 * @fsp: The FCP packet the command is on
1174 * @resp: The handler for the response
1175 */
1176 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1177 void (*resp)(struct fc_seq *,
1178 struct fc_frame *fp,
1179 void *arg))
1180 {
1181 struct fc_frame *fp;
1182 struct fc_seq *seq;
1183 struct fc_rport *rport;
1184 struct fc_rport_libfc_priv *rpriv;
1185 const size_t len = sizeof(fsp->cdb_cmd);
1186 int rc = 0;
1187
1188 if (fc_fcp_lock_pkt(fsp))
1189 return 0;
1190
1191 fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1192 if (!fp) {
1193 rc = -1;
1194 goto unlock;
1195 }
1196
1197 memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1198 fr_fsp(fp) = fsp;
1199 rport = fsp->rport;
1200 fsp->max_payload = rport->maxframe_size;
1201 rpriv = rport->dd_data;
1202
1203 fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1204 rpriv->local_port->port_id, FC_TYPE_FCP,
1205 FC_FCTL_REQ, 0);
1206
1207 seq = fc_exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
1208 if (!seq) {
1209 rc = -1;
1210 goto unlock;
1211 }
1212 fsp->seq_ptr = seq;
1213 fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */
1214
1215 setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1216 if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1217 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1218
1219 unlock:
1220 fc_fcp_unlock_pkt(fsp);
1221 return rc;
1222 }
1223
1224 /**
1225 * fc_fcp_error() - Handler for FCP layer errors
1226 * @fsp: The FCP packet the error is on
1227 * @fp: The frame that has errored
1228 */
1229 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1230 {
1231 int error = PTR_ERR(fp);
1232
1233 if (fc_fcp_lock_pkt(fsp))
1234 return;
1235
1236 if (error == -FC_EX_CLOSED) {
1237 fc_fcp_retry_cmd(fsp, FC_ERROR);
1238 goto unlock;
1239 }
1240
1241 /*
1242 * clear abort pending, because the lower layer
1243 * decided to force completion.
1244 */
1245 fsp->state &= ~FC_SRB_ABORT_PENDING;
1246 fsp->status_code = FC_CMD_PLOGO;
1247 fc_fcp_complete_locked(fsp);
1248 unlock:
1249 fc_fcp_unlock_pkt(fsp);
1250 }
1251
1252 /**
1253 * fc_fcp_pkt_abort() - Abort a fcp_pkt
1254 * @fsp: The FCP packet to abort on
1255 *
1256 * Called to send an abort and then wait for abort completion
1257 */
1258 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1259 {
1260 int rc = FAILED;
1261 unsigned long ticks_left;
1262
1263 FC_FCP_DBG(fsp, "pkt abort state %x\n", fsp->state);
1264 if (fc_fcp_send_abort(fsp)) {
1265 FC_FCP_DBG(fsp, "failed to send abort\n");
1266 return FAILED;
1267 }
1268
1269 if (fsp->state & FC_SRB_ABORTED) {
1270 FC_FCP_DBG(fsp, "target abort cmd completed\n");
1271 return SUCCESS;
1272 }
1273
1274 init_completion(&fsp->tm_done);
1275 fsp->wait_for_comp = 1;
1276
1277 spin_unlock_bh(&fsp->scsi_pkt_lock);
1278 ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1279 FC_SCSI_TM_TOV);
1280 spin_lock_bh(&fsp->scsi_pkt_lock);
1281 fsp->wait_for_comp = 0;
1282
1283 if (!ticks_left) {
1284 FC_FCP_DBG(fsp, "target abort cmd failed\n");
1285 } else if (fsp->state & FC_SRB_ABORTED) {
1286 FC_FCP_DBG(fsp, "target abort cmd passed\n");
1287 rc = SUCCESS;
1288 fc_fcp_complete_locked(fsp);
1289 }
1290
1291 return rc;
1292 }
1293
1294 /**
1295 * fc_lun_reset_send() - Send LUN reset command
1296 * @data: The FCP packet that identifies the LUN to be reset
1297 */
1298 static void fc_lun_reset_send(unsigned long data)
1299 {
1300 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1301 struct fc_lport *lport = fsp->lp;
1302
1303 if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1304 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1305 return;
1306 if (fc_fcp_lock_pkt(fsp))
1307 return;
1308 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1309 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1310 fc_fcp_unlock_pkt(fsp);
1311 }
1312 }
1313
1314 /**
1315 * fc_lun_reset() - Send a LUN RESET command to a device
1316 * and wait for the reply
1317 * @lport: The local port to sent the command on
1318 * @fsp: The FCP packet that identifies the LUN to be reset
1319 * @id: The SCSI command ID
1320 * @lun: The LUN ID to be reset
1321 */
1322 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1323 unsigned int id, unsigned int lun)
1324 {
1325 int rc;
1326
1327 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1328 fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1329 int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1330
1331 fsp->wait_for_comp = 1;
1332 init_completion(&fsp->tm_done);
1333
1334 fc_lun_reset_send((unsigned long)fsp);
1335
1336 /*
1337 * wait for completion of reset
1338 * after that make sure all commands are terminated
1339 */
1340 rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1341
1342 spin_lock_bh(&fsp->scsi_pkt_lock);
1343 fsp->state |= FC_SRB_COMPL;
1344 spin_unlock_bh(&fsp->scsi_pkt_lock);
1345
1346 del_timer_sync(&fsp->timer);
1347
1348 spin_lock_bh(&fsp->scsi_pkt_lock);
1349 if (fsp->seq_ptr) {
1350 fc_exch_done(fsp->seq_ptr);
1351 fsp->seq_ptr = NULL;
1352 }
1353 fsp->wait_for_comp = 0;
1354 spin_unlock_bh(&fsp->scsi_pkt_lock);
1355
1356 if (!rc) {
1357 FC_SCSI_DBG(lport, "lun reset failed\n");
1358 return FAILED;
1359 }
1360
1361 /* cdb_status holds the tmf's rsp code */
1362 if (fsp->cdb_status != FCP_TMF_CMPL)
1363 return FAILED;
1364
1365 FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1366 fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1367 return SUCCESS;
1368 }
1369
1370 /**
1371 * fc_tm_done() - Task Management response handler
1372 * @seq: The sequence that the response is on
1373 * @fp: The response frame
1374 * @arg: The FCP packet the response is for
1375 */
1376 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1377 {
1378 struct fc_fcp_pkt *fsp = arg;
1379 struct fc_frame_header *fh;
1380
1381 if (IS_ERR(fp)) {
1382 /*
1383 * If there is an error just let it timeout or wait
1384 * for TMF to be aborted if it timedout.
1385 *
1386 * scsi-eh will escalate for when either happens.
1387 */
1388 return;
1389 }
1390
1391 if (fc_fcp_lock_pkt(fsp))
1392 goto out;
1393
1394 /*
1395 * raced with eh timeout handler.
1396 */
1397 if (!fsp->seq_ptr || !fsp->wait_for_comp)
1398 goto out_unlock;
1399
1400 fh = fc_frame_header_get(fp);
1401 if (fh->fh_type != FC_TYPE_BLS)
1402 fc_fcp_resp(fsp, fp);
1403 fsp->seq_ptr = NULL;
1404 fc_exch_done(seq);
1405 out_unlock:
1406 fc_fcp_unlock_pkt(fsp);
1407 out:
1408 fc_frame_free(fp);
1409 }
1410
1411 /**
1412 * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1413 * @lport: The local port to be cleaned up
1414 */
1415 static void fc_fcp_cleanup(struct fc_lport *lport)
1416 {
1417 fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1418 }
1419
1420 /**
1421 * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1422 * @data: The FCP packet that has timed out
1423 *
1424 * If REC is supported then just issue it and return. The REC exchange will
1425 * complete or time out and recovery can continue at that point. Otherwise,
1426 * if the response has been received without all the data it has been
1427 * ER_TIMEOUT since the response was received. If the response has not been
1428 * received we see if data was received recently. If it has been then we
1429 * continue waiting, otherwise, we abort the command.
1430 */
1431 static void fc_fcp_timeout(unsigned long data)
1432 {
1433 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1434 struct fc_rport *rport = fsp->rport;
1435 struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1436
1437 if (fc_fcp_lock_pkt(fsp))
1438 return;
1439
1440 if (fsp->cdb_cmd.fc_tm_flags)
1441 goto unlock;
1442
1443 if (fsp->lp->qfull) {
1444 FC_FCP_DBG(fsp, "fcp timeout, resetting timer delay %d\n",
1445 fsp->timer_delay);
1446 setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1447 fc_fcp_timer_set(fsp, fsp->timer_delay);
1448 goto unlock;
1449 }
1450 FC_FCP_DBG(fsp, "fcp timeout, delay %d flags %x state %x\n",
1451 fsp->timer_delay, rpriv->flags, fsp->state);
1452 fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1453
1454 if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1455 fc_fcp_rec(fsp);
1456 else if (fsp->state & FC_SRB_RCV_STATUS)
1457 fc_fcp_complete_locked(fsp);
1458 else
1459 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1460 fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1461 unlock:
1462 fc_fcp_unlock_pkt(fsp);
1463 }
1464
1465 /**
1466 * fc_fcp_rec() - Send a REC ELS request
1467 * @fsp: The FCP packet to send the REC request on
1468 */
1469 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1470 {
1471 struct fc_lport *lport;
1472 struct fc_frame *fp;
1473 struct fc_rport *rport;
1474 struct fc_rport_libfc_priv *rpriv;
1475
1476 lport = fsp->lp;
1477 rport = fsp->rport;
1478 rpriv = rport->dd_data;
1479 if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1480 fsp->status_code = FC_HRD_ERROR;
1481 fsp->io_status = 0;
1482 fc_fcp_complete_locked(fsp);
1483 return;
1484 }
1485
1486 fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1487 if (!fp)
1488 goto retry;
1489
1490 fr_seq(fp) = fsp->seq_ptr;
1491 fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1492 rpriv->local_port->port_id, FC_TYPE_ELS,
1493 FC_FCTL_REQ, 0);
1494 if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1495 fc_fcp_rec_resp, fsp,
1496 2 * lport->r_a_tov)) {
1497 fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */
1498 return;
1499 }
1500 retry:
1501 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1502 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1503 else
1504 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1505 }
1506
1507 /**
1508 * fc_fcp_rec_resp() - Handler for REC ELS responses
1509 * @seq: The sequence the response is on
1510 * @fp: The response frame
1511 * @arg: The FCP packet the response is on
1512 *
1513 * If the response is a reject then the scsi layer will handle
1514 * the timeout. If the response is a LS_ACC then if the I/O was not completed
1515 * set the timeout and return. If the I/O was completed then complete the
1516 * exchange and tell the SCSI layer.
1517 */
1518 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1519 {
1520 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1521 struct fc_els_rec_acc *recp;
1522 struct fc_els_ls_rjt *rjt;
1523 u32 e_stat;
1524 u8 opcode;
1525 u32 offset;
1526 enum dma_data_direction data_dir;
1527 enum fc_rctl r_ctl;
1528 struct fc_rport_libfc_priv *rpriv;
1529
1530 if (IS_ERR(fp)) {
1531 fc_fcp_rec_error(fsp, fp);
1532 return;
1533 }
1534
1535 if (fc_fcp_lock_pkt(fsp))
1536 goto out;
1537
1538 fsp->recov_retry = 0;
1539 opcode = fc_frame_payload_op(fp);
1540 if (opcode == ELS_LS_RJT) {
1541 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1542 switch (rjt->er_reason) {
1543 default:
1544 FC_FCP_DBG(fsp,
1545 "device %x invalid REC reject %d/%d\n",
1546 fsp->rport->port_id, rjt->er_reason,
1547 rjt->er_explan);
1548 /* fall through */
1549 case ELS_RJT_UNSUP:
1550 FC_FCP_DBG(fsp, "device does not support REC\n");
1551 rpriv = fsp->rport->dd_data;
1552 /*
1553 * if we do not spport RECs or got some bogus
1554 * reason then resetup timer so we check for
1555 * making progress.
1556 */
1557 rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1558 break;
1559 case ELS_RJT_LOGIC:
1560 case ELS_RJT_UNAB:
1561 FC_FCP_DBG(fsp, "device %x REC reject %d/%d\n",
1562 fsp->rport->port_id, rjt->er_reason,
1563 rjt->er_explan);
1564 /*
1565 * If response got lost or is stuck in the
1566 * queue somewhere we have no idea if and when
1567 * the response will be received. So quarantine
1568 * the xid and retry the command.
1569 */
1570 if (rjt->er_explan == ELS_EXPL_OXID_RXID) {
1571 struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1572 ep->state |= FC_EX_QUARANTINE;
1573 fsp->state |= FC_SRB_ABORTED;
1574 fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1575 break;
1576 }
1577 fc_fcp_recovery(fsp, FC_TRANS_RESET);
1578 break;
1579 }
1580 } else if (opcode == ELS_LS_ACC) {
1581 if (fsp->state & FC_SRB_ABORTED)
1582 goto unlock_out;
1583
1584 data_dir = fsp->cmd->sc_data_direction;
1585 recp = fc_frame_payload_get(fp, sizeof(*recp));
1586 offset = ntohl(recp->reca_fc4value);
1587 e_stat = ntohl(recp->reca_e_stat);
1588
1589 if (e_stat & ESB_ST_COMPLETE) {
1590
1591 /*
1592 * The exchange is complete.
1593 *
1594 * For output, we must've lost the response.
1595 * For input, all data must've been sent.
1596 * We lost may have lost the response
1597 * (and a confirmation was requested) and maybe
1598 * some data.
1599 *
1600 * If all data received, send SRR
1601 * asking for response. If partial data received,
1602 * or gaps, SRR requests data at start of gap.
1603 * Recovery via SRR relies on in-order-delivery.
1604 */
1605 if (data_dir == DMA_TO_DEVICE) {
1606 r_ctl = FC_RCTL_DD_CMD_STATUS;
1607 } else if (fsp->xfer_contig_end == offset) {
1608 r_ctl = FC_RCTL_DD_CMD_STATUS;
1609 } else {
1610 offset = fsp->xfer_contig_end;
1611 r_ctl = FC_RCTL_DD_SOL_DATA;
1612 }
1613 fc_fcp_srr(fsp, r_ctl, offset);
1614 } else if (e_stat & ESB_ST_SEQ_INIT) {
1615 /*
1616 * The remote port has the initiative, so just
1617 * keep waiting for it to complete.
1618 */
1619 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1620 } else {
1621
1622 /*
1623 * The exchange is incomplete, we have seq. initiative.
1624 * Lost response with requested confirmation,
1625 * lost confirmation, lost transfer ready or
1626 * lost write data.
1627 *
1628 * For output, if not all data was received, ask
1629 * for transfer ready to be repeated.
1630 *
1631 * If we received or sent all the data, send SRR to
1632 * request response.
1633 *
1634 * If we lost a response, we may have lost some read
1635 * data as well.
1636 */
1637 r_ctl = FC_RCTL_DD_SOL_DATA;
1638 if (data_dir == DMA_TO_DEVICE) {
1639 r_ctl = FC_RCTL_DD_CMD_STATUS;
1640 if (offset < fsp->data_len)
1641 r_ctl = FC_RCTL_DD_DATA_DESC;
1642 } else if (offset == fsp->xfer_contig_end) {
1643 r_ctl = FC_RCTL_DD_CMD_STATUS;
1644 } else if (fsp->xfer_contig_end < offset) {
1645 offset = fsp->xfer_contig_end;
1646 }
1647 fc_fcp_srr(fsp, r_ctl, offset);
1648 }
1649 }
1650 unlock_out:
1651 fc_fcp_unlock_pkt(fsp);
1652 out:
1653 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */
1654 fc_frame_free(fp);
1655 }
1656
1657 /**
1658 * fc_fcp_rec_error() - Handler for REC errors
1659 * @fsp: The FCP packet the error is on
1660 * @fp: The REC frame
1661 */
1662 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1663 {
1664 int error = PTR_ERR(fp);
1665
1666 if (fc_fcp_lock_pkt(fsp))
1667 goto out;
1668
1669 switch (error) {
1670 case -FC_EX_CLOSED:
1671 FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange closed\n",
1672 fsp, fsp->rport->port_id);
1673 fc_fcp_retry_cmd(fsp, FC_ERROR);
1674 break;
1675
1676 default:
1677 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1678 fsp, fsp->rport->port_id, error);
1679 fsp->status_code = FC_CMD_PLOGO;
1680 /* fall through */
1681
1682 case -FC_EX_TIMEOUT:
1683 /*
1684 * Assume REC or LS_ACC was lost.
1685 * The exchange manager will have aborted REC, so retry.
1686 */
1687 FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange timeout retry %d/%d\n",
1688 fsp, fsp->rport->port_id, fsp->recov_retry,
1689 FC_MAX_RECOV_RETRY);
1690 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1691 fc_fcp_rec(fsp);
1692 else
1693 fc_fcp_recovery(fsp, FC_ERROR);
1694 break;
1695 }
1696 fc_fcp_unlock_pkt(fsp);
1697 out:
1698 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */
1699 }
1700
1701 /**
1702 * fc_fcp_recovery() - Handler for fcp_pkt recovery
1703 * @fsp: The FCP pkt that needs to be aborted
1704 */
1705 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1706 {
1707 FC_FCP_DBG(fsp, "start recovery code %x\n", code);
1708 fsp->status_code = code;
1709 fsp->cdb_status = 0;
1710 fsp->io_status = 0;
1711 /*
1712 * if this fails then we let the scsi command timer fire and
1713 * scsi-ml escalate.
1714 */
1715 fc_fcp_send_abort(fsp);
1716 }
1717
1718 /**
1719 * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1720 * @fsp: The FCP packet the SRR is to be sent on
1721 * @r_ctl: The R_CTL field for the SRR request
1722 * This is called after receiving status but insufficient data, or
1723 * when expecting status but the request has timed out.
1724 */
1725 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1726 {
1727 struct fc_lport *lport = fsp->lp;
1728 struct fc_rport *rport;
1729 struct fc_rport_libfc_priv *rpriv;
1730 struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1731 struct fc_seq *seq;
1732 struct fcp_srr *srr;
1733 struct fc_frame *fp;
1734
1735 rport = fsp->rport;
1736 rpriv = rport->dd_data;
1737
1738 if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1739 rpriv->rp_state != RPORT_ST_READY)
1740 goto retry; /* shouldn't happen */
1741 fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1742 if (!fp)
1743 goto retry;
1744
1745 srr = fc_frame_payload_get(fp, sizeof(*srr));
1746 memset(srr, 0, sizeof(*srr));
1747 srr->srr_op = ELS_SRR;
1748 srr->srr_ox_id = htons(ep->oxid);
1749 srr->srr_rx_id = htons(ep->rxid);
1750 srr->srr_r_ctl = r_ctl;
1751 srr->srr_rel_off = htonl(offset);
1752
1753 fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1754 rpriv->local_port->port_id, FC_TYPE_FCP,
1755 FC_FCTL_REQ, 0);
1756
1757 seq = fc_exch_seq_send(lport, fp, fc_fcp_srr_resp,
1758 fc_fcp_pkt_destroy,
1759 fsp, get_fsp_rec_tov(fsp));
1760 if (!seq)
1761 goto retry;
1762
1763 fsp->recov_seq = seq;
1764 fsp->xfer_len = offset;
1765 fsp->xfer_contig_end = offset;
1766 fsp->state &= ~FC_SRB_RCV_STATUS;
1767 fc_fcp_pkt_hold(fsp); /* hold for outstanding SRR */
1768 return;
1769 retry:
1770 fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1771 }
1772
1773 /**
1774 * fc_fcp_srr_resp() - Handler for SRR response
1775 * @seq: The sequence the SRR is on
1776 * @fp: The SRR frame
1777 * @arg: The FCP packet the SRR is on
1778 */
1779 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1780 {
1781 struct fc_fcp_pkt *fsp = arg;
1782 struct fc_frame_header *fh;
1783
1784 if (IS_ERR(fp)) {
1785 fc_fcp_srr_error(fsp, fp);
1786 return;
1787 }
1788
1789 if (fc_fcp_lock_pkt(fsp))
1790 goto out;
1791
1792 fh = fc_frame_header_get(fp);
1793 /*
1794 * BUG? fc_fcp_srr_error calls fc_exch_done which would release
1795 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1796 * then fc_exch_timeout would be sending an abort. The fc_exch_done
1797 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1798 * an abort response though.
1799 */
1800 if (fh->fh_type == FC_TYPE_BLS) {
1801 fc_fcp_unlock_pkt(fsp);
1802 return;
1803 }
1804
1805 switch (fc_frame_payload_op(fp)) {
1806 case ELS_LS_ACC:
1807 fsp->recov_retry = 0;
1808 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1809 break;
1810 case ELS_LS_RJT:
1811 default:
1812 fc_fcp_recovery(fsp, FC_ERROR);
1813 break;
1814 }
1815 fc_fcp_unlock_pkt(fsp);
1816 out:
1817 fc_exch_done(seq);
1818 fc_frame_free(fp);
1819 }
1820
1821 /**
1822 * fc_fcp_srr_error() - Handler for SRR errors
1823 * @fsp: The FCP packet that the SRR error is on
1824 * @fp: The SRR frame
1825 */
1826 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1827 {
1828 if (fc_fcp_lock_pkt(fsp))
1829 goto out;
1830 switch (PTR_ERR(fp)) {
1831 case -FC_EX_TIMEOUT:
1832 FC_FCP_DBG(fsp, "SRR timeout, retries %d\n", fsp->recov_retry);
1833 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1834 fc_fcp_rec(fsp);
1835 else
1836 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1837 break;
1838 case -FC_EX_CLOSED: /* e.g., link failure */
1839 FC_FCP_DBG(fsp, "SRR error, exchange closed\n");
1840 /* fall through */
1841 default:
1842 fc_fcp_retry_cmd(fsp, FC_ERROR);
1843 break;
1844 }
1845 fc_fcp_unlock_pkt(fsp);
1846 out:
1847 fc_exch_done(fsp->recov_seq);
1848 }
1849
1850 /**
1851 * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1852 * @lport: The local port to be checked
1853 */
1854 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1855 {
1856 /* lock ? */
1857 return (lport->state == LPORT_ST_READY) &&
1858 lport->link_up && !lport->qfull;
1859 }
1860
1861 /**
1862 * fc_queuecommand() - The queuecommand function of the SCSI template
1863 * @shost: The Scsi_Host that the command was issued to
1864 * @cmd: The scsi_cmnd to be executed
1865 *
1866 * This is the i/o strategy routine, called by the SCSI layer.
1867 */
1868 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1869 {
1870 struct fc_lport *lport = shost_priv(shost);
1871 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1872 struct fc_fcp_pkt *fsp;
1873 struct fc_rport_libfc_priv *rpriv;
1874 int rval;
1875 int rc = 0;
1876 struct fc_stats *stats;
1877
1878 rval = fc_remote_port_chkready(rport);
1879 if (rval) {
1880 sc_cmd->result = rval;
1881 sc_cmd->scsi_done(sc_cmd);
1882 return 0;
1883 }
1884
1885 if (!*(struct fc_remote_port **)rport->dd_data) {
1886 /*
1887 * rport is transitioning from blocked/deleted to
1888 * online
1889 */
1890 sc_cmd->result = DID_IMM_RETRY << 16;
1891 sc_cmd->scsi_done(sc_cmd);
1892 goto out;
1893 }
1894
1895 rpriv = rport->dd_data;
1896
1897 if (!fc_fcp_lport_queue_ready(lport)) {
1898 if (lport->qfull) {
1899 fc_fcp_can_queue_ramp_down(lport);
1900 shost_printk(KERN_ERR, lport->host,
1901 "libfc: queue full, "
1902 "reducing can_queue to %d.\n",
1903 lport->host->can_queue);
1904 }
1905 rc = SCSI_MLQUEUE_HOST_BUSY;
1906 goto out;
1907 }
1908
1909 fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1910 if (fsp == NULL) {
1911 rc = SCSI_MLQUEUE_HOST_BUSY;
1912 goto out;
1913 }
1914
1915 /*
1916 * build the libfc request pkt
1917 */
1918 fsp->cmd = sc_cmd; /* save the cmd */
1919 fsp->rport = rport; /* set the remote port ptr */
1920
1921 /*
1922 * set up the transfer length
1923 */
1924 fsp->data_len = scsi_bufflen(sc_cmd);
1925 fsp->xfer_len = 0;
1926
1927 /*
1928 * setup the data direction
1929 */
1930 stats = per_cpu_ptr(lport->stats, get_cpu());
1931 if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1932 fsp->req_flags = FC_SRB_READ;
1933 stats->InputRequests++;
1934 stats->InputBytes += fsp->data_len;
1935 } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1936 fsp->req_flags = FC_SRB_WRITE;
1937 stats->OutputRequests++;
1938 stats->OutputBytes += fsp->data_len;
1939 } else {
1940 fsp->req_flags = 0;
1941 stats->ControlRequests++;
1942 }
1943 put_cpu();
1944
1945 /*
1946 * send it to the lower layer
1947 * if we get -1 return then put the request in the pending
1948 * queue.
1949 */
1950 rval = fc_fcp_pkt_send(lport, fsp);
1951 if (rval != 0) {
1952 fsp->state = FC_SRB_FREE;
1953 fc_fcp_pkt_release(fsp);
1954 rc = SCSI_MLQUEUE_HOST_BUSY;
1955 }
1956 out:
1957 return rc;
1958 }
1959 EXPORT_SYMBOL(fc_queuecommand);
1960
1961 /**
1962 * fc_io_compl() - Handle responses for completed commands
1963 * @fsp: The FCP packet that is complete
1964 *
1965 * Translates fcp_pkt errors to a Linux SCSI errors.
1966 * The fcp packet lock must be held when calling.
1967 */
1968 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1969 {
1970 struct fc_fcp_internal *si;
1971 struct scsi_cmnd *sc_cmd;
1972 struct fc_lport *lport;
1973 unsigned long flags;
1974
1975 /* release outstanding ddp context */
1976 fc_fcp_ddp_done(fsp);
1977
1978 fsp->state |= FC_SRB_COMPL;
1979 if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1980 spin_unlock_bh(&fsp->scsi_pkt_lock);
1981 del_timer_sync(&fsp->timer);
1982 spin_lock_bh(&fsp->scsi_pkt_lock);
1983 }
1984
1985 lport = fsp->lp;
1986 si = fc_get_scsi_internal(lport);
1987
1988 /*
1989 * if can_queue ramp down is done then try can_queue ramp up
1990 * since commands are completing now.
1991 */
1992 if (si->last_can_queue_ramp_down_time)
1993 fc_fcp_can_queue_ramp_up(lport);
1994
1995 sc_cmd = fsp->cmd;
1996 CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1997 switch (fsp->status_code) {
1998 case FC_COMPLETE:
1999 if (fsp->cdb_status == 0) {
2000 /*
2001 * good I/O status
2002 */
2003 sc_cmd->result = DID_OK << 16;
2004 if (fsp->scsi_resid)
2005 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
2006 } else {
2007 /*
2008 * transport level I/O was ok but scsi
2009 * has non zero status
2010 */
2011 sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
2012 }
2013 break;
2014 case FC_ERROR:
2015 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2016 "due to FC_ERROR\n");
2017 sc_cmd->result = DID_ERROR << 16;
2018 break;
2019 case FC_DATA_UNDRUN:
2020 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
2021 /*
2022 * scsi status is good but transport level
2023 * underrun.
2024 */
2025 if (fsp->state & FC_SRB_RCV_STATUS) {
2026 sc_cmd->result = DID_OK << 16;
2027 } else {
2028 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
2029 " due to FC_DATA_UNDRUN (trans)\n");
2030 sc_cmd->result = DID_ERROR << 16;
2031 }
2032 } else {
2033 /*
2034 * scsi got underrun, this is an error
2035 */
2036 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2037 "due to FC_DATA_UNDRUN (scsi)\n");
2038 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
2039 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2040 }
2041 break;
2042 case FC_DATA_OVRRUN:
2043 /*
2044 * overrun is an error
2045 */
2046 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2047 "due to FC_DATA_OVRRUN\n");
2048 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2049 break;
2050 case FC_CMD_ABORTED:
2051 if (host_byte(sc_cmd->result) == DID_TIME_OUT)
2052 FC_FCP_DBG(fsp, "Returning DID_TIME_OUT to scsi-ml "
2053 "due to FC_CMD_ABORTED\n");
2054 else {
2055 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2056 "due to FC_CMD_ABORTED\n");
2057 set_host_byte(sc_cmd, DID_ERROR);
2058 }
2059 sc_cmd->result |= fsp->io_status;
2060 break;
2061 case FC_CMD_RESET:
2062 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
2063 "due to FC_CMD_RESET\n");
2064 sc_cmd->result = (DID_RESET << 16);
2065 break;
2066 case FC_TRANS_RESET:
2067 FC_FCP_DBG(fsp, "Returning DID_SOFT_ERROR to scsi-ml "
2068 "due to FC_TRANS_RESET\n");
2069 sc_cmd->result = (DID_SOFT_ERROR << 16);
2070 break;
2071 case FC_HRD_ERROR:
2072 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
2073 "due to FC_HRD_ERROR\n");
2074 sc_cmd->result = (DID_NO_CONNECT << 16);
2075 break;
2076 case FC_CRC_ERROR:
2077 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
2078 "due to FC_CRC_ERROR\n");
2079 sc_cmd->result = (DID_PARITY << 16);
2080 break;
2081 case FC_TIMED_OUT:
2082 FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
2083 "due to FC_TIMED_OUT\n");
2084 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
2085 break;
2086 default:
2087 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2088 "due to unknown error\n");
2089 sc_cmd->result = (DID_ERROR << 16);
2090 break;
2091 }
2092
2093 if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2094 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2095
2096 spin_lock_irqsave(&si->scsi_queue_lock, flags);
2097 list_del(&fsp->list);
2098 sc_cmd->SCp.ptr = NULL;
2099 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2100 sc_cmd->scsi_done(sc_cmd);
2101
2102 /* release ref from initial allocation in queue command */
2103 fc_fcp_pkt_release(fsp);
2104 }
2105
2106 /**
2107 * fc_eh_abort() - Abort a command
2108 * @sc_cmd: The SCSI command to abort
2109 *
2110 * From SCSI host template.
2111 * Send an ABTS to the target device and wait for the response.
2112 */
2113 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2114 {
2115 struct fc_fcp_pkt *fsp;
2116 struct fc_lport *lport;
2117 struct fc_fcp_internal *si;
2118 int rc = FAILED;
2119 unsigned long flags;
2120 int rval;
2121
2122 rval = fc_block_scsi_eh(sc_cmd);
2123 if (rval)
2124 return rval;
2125
2126 lport = shost_priv(sc_cmd->device->host);
2127 if (lport->state != LPORT_ST_READY)
2128 return rc;
2129 else if (!lport->link_up)
2130 return rc;
2131
2132 si = fc_get_scsi_internal(lport);
2133 spin_lock_irqsave(&si->scsi_queue_lock, flags);
2134 fsp = CMD_SP(sc_cmd);
2135 if (!fsp) {
2136 /* command completed while scsi eh was setting up */
2137 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2138 return SUCCESS;
2139 }
2140 /* grab a ref so the fsp and sc_cmd cannot be released from under us */
2141 fc_fcp_pkt_hold(fsp);
2142 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2143
2144 if (fc_fcp_lock_pkt(fsp)) {
2145 /* completed while we were waiting for timer to be deleted */
2146 rc = SUCCESS;
2147 goto release_pkt;
2148 }
2149
2150 rc = fc_fcp_pkt_abort(fsp);
2151 fc_fcp_unlock_pkt(fsp);
2152
2153 release_pkt:
2154 fc_fcp_pkt_release(fsp);
2155 return rc;
2156 }
2157 EXPORT_SYMBOL(fc_eh_abort);
2158
2159 /**
2160 * fc_eh_device_reset() - Reset a single LUN
2161 * @sc_cmd: The SCSI command which identifies the device whose
2162 * LUN is to be reset
2163 *
2164 * Set from SCSI host template.
2165 */
2166 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2167 {
2168 struct fc_lport *lport;
2169 struct fc_fcp_pkt *fsp;
2170 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2171 int rc = FAILED;
2172 int rval;
2173
2174 rval = fc_block_scsi_eh(sc_cmd);
2175 if (rval)
2176 return rval;
2177
2178 lport = shost_priv(sc_cmd->device->host);
2179
2180 if (lport->state != LPORT_ST_READY)
2181 return rc;
2182
2183 FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2184
2185 fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2186 if (fsp == NULL) {
2187 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2188 goto out;
2189 }
2190
2191 /*
2192 * Build the libfc request pkt. Do not set the scsi cmnd, because
2193 * the sc passed in is not setup for execution like when sent
2194 * through the queuecommand callout.
2195 */
2196 fsp->rport = rport; /* set the remote port ptr */
2197
2198 /*
2199 * flush outstanding commands
2200 */
2201 rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2202 fsp->state = FC_SRB_FREE;
2203 fc_fcp_pkt_release(fsp);
2204
2205 out:
2206 return rc;
2207 }
2208 EXPORT_SYMBOL(fc_eh_device_reset);
2209
2210 /**
2211 * fc_eh_host_reset() - Reset a Scsi_Host.
2212 * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2213 */
2214 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2215 {
2216 struct Scsi_Host *shost = sc_cmd->device->host;
2217 struct fc_lport *lport = shost_priv(shost);
2218 unsigned long wait_tmo;
2219
2220 FC_SCSI_DBG(lport, "Resetting host\n");
2221
2222 fc_block_scsi_eh(sc_cmd);
2223
2224 fc_lport_reset(lport);
2225 wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2226 while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2227 wait_tmo))
2228 msleep(1000);
2229
2230 if (fc_fcp_lport_queue_ready(lport)) {
2231 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2232 "on port (%6.6x)\n", lport->port_id);
2233 return SUCCESS;
2234 } else {
2235 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2236 "port (%6.6x) is not ready.\n",
2237 lport->port_id);
2238 return FAILED;
2239 }
2240 }
2241 EXPORT_SYMBOL(fc_eh_host_reset);
2242
2243 /**
2244 * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2245 * @sdev: The SCSI device that identifies the SCSI host
2246 *
2247 * Configures queue depth based on host's cmd_per_len. If not set
2248 * then we use the libfc default.
2249 */
2250 int fc_slave_alloc(struct scsi_device *sdev)
2251 {
2252 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2253
2254 if (!rport || fc_remote_port_chkready(rport))
2255 return -ENXIO;
2256
2257 scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2258 return 0;
2259 }
2260 EXPORT_SYMBOL(fc_slave_alloc);
2261
2262 /**
2263 * fc_fcp_destory() - Tear down the FCP layer for a given local port
2264 * @lport: The local port that no longer needs the FCP layer
2265 */
2266 void fc_fcp_destroy(struct fc_lport *lport)
2267 {
2268 struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2269
2270 if (!list_empty(&si->scsi_pkt_queue))
2271 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2272 "port (%6.6x)\n", lport->port_id);
2273
2274 mempool_destroy(si->scsi_pkt_pool);
2275 kfree(si);
2276 lport->scsi_priv = NULL;
2277 }
2278 EXPORT_SYMBOL(fc_fcp_destroy);
2279
2280 int fc_setup_fcp(void)
2281 {
2282 int rc = 0;
2283
2284 scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2285 sizeof(struct fc_fcp_pkt),
2286 0, SLAB_HWCACHE_ALIGN, NULL);
2287 if (!scsi_pkt_cachep) {
2288 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2289 "module load failed!");
2290 rc = -ENOMEM;
2291 }
2292
2293 return rc;
2294 }
2295
2296 void fc_destroy_fcp(void)
2297 {
2298 if (scsi_pkt_cachep)
2299 kmem_cache_destroy(scsi_pkt_cachep);
2300 }
2301
2302 /**
2303 * fc_fcp_init() - Initialize the FCP layer for a local port
2304 * @lport: The local port to initialize the exchange layer for
2305 */
2306 int fc_fcp_init(struct fc_lport *lport)
2307 {
2308 int rc;
2309 struct fc_fcp_internal *si;
2310
2311 if (!lport->tt.fcp_cmd_send)
2312 lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2313
2314 if (!lport->tt.fcp_cleanup)
2315 lport->tt.fcp_cleanup = fc_fcp_cleanup;
2316
2317 if (!lport->tt.fcp_abort_io)
2318 lport->tt.fcp_abort_io = fc_fcp_abort_io;
2319
2320 si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2321 if (!si)
2322 return -ENOMEM;
2323 lport->scsi_priv = si;
2324 si->max_can_queue = lport->host->can_queue;
2325 INIT_LIST_HEAD(&si->scsi_pkt_queue);
2326 spin_lock_init(&si->scsi_queue_lock);
2327
2328 si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2329 if (!si->scsi_pkt_pool) {
2330 rc = -ENOMEM;
2331 goto free_internal;
2332 }
2333 return 0;
2334
2335 free_internal:
2336 kfree(si);
2337 return rc;
2338 }
2339 EXPORT_SYMBOL(fc_fcp_init);