1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2010 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <linux/dma-mapping.h>
25 #include <linux/idr.h>
26 #include <linux/interrupt.h>
27 #include <linux/kthread.h>
28 #include <linux/pci.h>
29 #include <linux/spinlock.h>
30 #include <linux/ctype.h>
31 #include <linux/aer.h>
32 #include <linux/slab.h>
34 #include <scsi/scsi.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_host.h>
37 #include <scsi/scsi_transport_fc.h>
42 #include "lpfc_sli4.h"
44 #include "lpfc_disc.h"
45 #include "lpfc_scsi.h"
47 #include "lpfc_logmsg.h"
48 #include "lpfc_crtn.h"
49 #include "lpfc_vport.h"
50 #include "lpfc_version.h"
53 unsigned long _dump_buf_data_order
;
55 unsigned long _dump_buf_dif_order
;
56 spinlock_t _dump_buf_lock
;
58 static void lpfc_get_hba_model_desc(struct lpfc_hba
*, uint8_t *, uint8_t *);
59 static int lpfc_post_rcv_buf(struct lpfc_hba
*);
60 static int lpfc_sli4_queue_create(struct lpfc_hba
*);
61 static void lpfc_sli4_queue_destroy(struct lpfc_hba
*);
62 static int lpfc_create_bootstrap_mbox(struct lpfc_hba
*);
63 static int lpfc_setup_endian_order(struct lpfc_hba
*);
64 static int lpfc_sli4_read_config(struct lpfc_hba
*);
65 static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba
*);
66 static void lpfc_free_sgl_list(struct lpfc_hba
*);
67 static int lpfc_init_sgl_list(struct lpfc_hba
*);
68 static int lpfc_init_active_sgl_array(struct lpfc_hba
*);
69 static void lpfc_free_active_sgl(struct lpfc_hba
*);
70 static int lpfc_hba_down_post_s3(struct lpfc_hba
*phba
);
71 static int lpfc_hba_down_post_s4(struct lpfc_hba
*phba
);
72 static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba
*);
73 static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba
*);
74 static void lpfc_sli4_cq_event_release_all(struct lpfc_hba
*);
76 static struct scsi_transport_template
*lpfc_transport_template
= NULL
;
77 static struct scsi_transport_template
*lpfc_vport_transport_template
= NULL
;
78 static DEFINE_IDR(lpfc_hba_index
);
81 * lpfc_config_port_prep - Perform lpfc initialization prior to config port
82 * @phba: pointer to lpfc hba data structure.
84 * This routine will do LPFC initialization prior to issuing the CONFIG_PORT
85 * mailbox command. It retrieves the revision information from the HBA and
86 * collects the Vital Product Data (VPD) about the HBA for preparing the
87 * configuration of the HBA.
91 * -ERESTART - requests the SLI layer to reset the HBA and try again.
92 * Any other value - indicates an error.
95 lpfc_config_port_prep(struct lpfc_hba
*phba
)
97 lpfc_vpd_t
*vp
= &phba
->vpd
;
101 char *lpfc_vpd_data
= NULL
;
103 static char licensed
[56] =
104 "key unlock for use with gnu public licensed code only\0";
105 static int init_key
= 1;
107 pmb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
109 phba
->link_state
= LPFC_HBA_ERROR
;
114 phba
->link_state
= LPFC_INIT_MBX_CMDS
;
116 if (lpfc_is_LC_HBA(phba
->pcidev
->device
)) {
118 uint32_t *ptext
= (uint32_t *) licensed
;
120 for (i
= 0; i
< 56; i
+= sizeof (uint32_t), ptext
++)
121 *ptext
= cpu_to_be32(*ptext
);
125 lpfc_read_nv(phba
, pmb
);
126 memset((char*)mb
->un
.varRDnvp
.rsvd3
, 0,
127 sizeof (mb
->un
.varRDnvp
.rsvd3
));
128 memcpy((char*)mb
->un
.varRDnvp
.rsvd3
, licensed
,
131 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_POLL
);
133 if (rc
!= MBX_SUCCESS
) {
134 lpfc_printf_log(phba
, KERN_ERR
, LOG_MBOX
,
135 "0324 Config Port initialization "
136 "error, mbxCmd x%x READ_NVPARM, "
138 mb
->mbxCommand
, mb
->mbxStatus
);
139 mempool_free(pmb
, phba
->mbox_mem_pool
);
142 memcpy(phba
->wwnn
, (char *)mb
->un
.varRDnvp
.nodename
,
144 memcpy(phba
->wwpn
, (char *)mb
->un
.varRDnvp
.portname
,
148 phba
->sli3_options
= 0x0;
150 /* Setup and issue mailbox READ REV command */
151 lpfc_read_rev(phba
, pmb
);
152 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_POLL
);
153 if (rc
!= MBX_SUCCESS
) {
154 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
155 "0439 Adapter failed to init, mbxCmd x%x "
156 "READ_REV, mbxStatus x%x\n",
157 mb
->mbxCommand
, mb
->mbxStatus
);
158 mempool_free( pmb
, phba
->mbox_mem_pool
);
164 * The value of rr must be 1 since the driver set the cv field to 1.
165 * This setting requires the FW to set all revision fields.
167 if (mb
->un
.varRdRev
.rr
== 0) {
169 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
170 "0440 Adapter failed to init, READ_REV has "
171 "missing revision information.\n");
172 mempool_free(pmb
, phba
->mbox_mem_pool
);
176 if (phba
->sli_rev
== 3 && !mb
->un
.varRdRev
.v3rsp
) {
177 mempool_free(pmb
, phba
->mbox_mem_pool
);
181 /* Save information as VPD data */
183 memcpy(&vp
->sli3Feat
, &mb
->un
.varRdRev
.sli3Feat
, sizeof(uint32_t));
184 vp
->rev
.sli1FwRev
= mb
->un
.varRdRev
.sli1FwRev
;
185 memcpy(vp
->rev
.sli1FwName
, (char*) mb
->un
.varRdRev
.sli1FwName
, 16);
186 vp
->rev
.sli2FwRev
= mb
->un
.varRdRev
.sli2FwRev
;
187 memcpy(vp
->rev
.sli2FwName
, (char *) mb
->un
.varRdRev
.sli2FwName
, 16);
188 vp
->rev
.biuRev
= mb
->un
.varRdRev
.biuRev
;
189 vp
->rev
.smRev
= mb
->un
.varRdRev
.smRev
;
190 vp
->rev
.smFwRev
= mb
->un
.varRdRev
.un
.smFwRev
;
191 vp
->rev
.endecRev
= mb
->un
.varRdRev
.endecRev
;
192 vp
->rev
.fcphHigh
= mb
->un
.varRdRev
.fcphHigh
;
193 vp
->rev
.fcphLow
= mb
->un
.varRdRev
.fcphLow
;
194 vp
->rev
.feaLevelHigh
= mb
->un
.varRdRev
.feaLevelHigh
;
195 vp
->rev
.feaLevelLow
= mb
->un
.varRdRev
.feaLevelLow
;
196 vp
->rev
.postKernRev
= mb
->un
.varRdRev
.postKernRev
;
197 vp
->rev
.opFwRev
= mb
->un
.varRdRev
.opFwRev
;
199 /* If the sli feature level is less then 9, we must
200 * tear down all RPIs and VPIs on link down if NPIV
203 if (vp
->rev
.feaLevelHigh
< 9)
204 phba
->sli3_options
|= LPFC_SLI3_VPORT_TEARDOWN
;
206 if (lpfc_is_LC_HBA(phba
->pcidev
->device
))
207 memcpy(phba
->RandomData
, (char *)&mb
->un
.varWords
[24],
208 sizeof (phba
->RandomData
));
210 /* Get adapter VPD information */
211 lpfc_vpd_data
= kmalloc(DMP_VPD_SIZE
, GFP_KERNEL
);
216 lpfc_dump_mem(phba
, pmb
, offset
, DMP_REGION_VPD
);
217 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_POLL
);
219 if (rc
!= MBX_SUCCESS
) {
220 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
221 "0441 VPD not present on adapter, "
222 "mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
223 mb
->mbxCommand
, mb
->mbxStatus
);
224 mb
->un
.varDmp
.word_cnt
= 0;
226 /* dump mem may return a zero when finished or we got a
227 * mailbox error, either way we are done.
229 if (mb
->un
.varDmp
.word_cnt
== 0)
231 if (mb
->un
.varDmp
.word_cnt
> DMP_VPD_SIZE
- offset
)
232 mb
->un
.varDmp
.word_cnt
= DMP_VPD_SIZE
- offset
;
233 lpfc_sli_pcimem_bcopy(((uint8_t *)mb
) + DMP_RSP_OFFSET
,
234 lpfc_vpd_data
+ offset
,
235 mb
->un
.varDmp
.word_cnt
);
236 offset
+= mb
->un
.varDmp
.word_cnt
;
237 } while (mb
->un
.varDmp
.word_cnt
&& offset
< DMP_VPD_SIZE
);
238 lpfc_parse_vpd(phba
, lpfc_vpd_data
, offset
);
240 kfree(lpfc_vpd_data
);
242 mempool_free(pmb
, phba
->mbox_mem_pool
);
247 * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
248 * @phba: pointer to lpfc hba data structure.
249 * @pmboxq: pointer to the driver internal queue element for mailbox command.
251 * This is the completion handler for driver's configuring asynchronous event
252 * mailbox command to the device. If the mailbox command returns successfully,
253 * it will set internal async event support flag to 1; otherwise, it will
254 * set internal async event support flag to 0.
257 lpfc_config_async_cmpl(struct lpfc_hba
* phba
, LPFC_MBOXQ_t
* pmboxq
)
259 if (pmboxq
->u
.mb
.mbxStatus
== MBX_SUCCESS
)
260 phba
->temp_sensor_support
= 1;
262 phba
->temp_sensor_support
= 0;
263 mempool_free(pmboxq
, phba
->mbox_mem_pool
);
268 * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
269 * @phba: pointer to lpfc hba data structure.
270 * @pmboxq: pointer to the driver internal queue element for mailbox command.
272 * This is the completion handler for dump mailbox command for getting
273 * wake up parameters. When this command complete, the response contain
274 * Option rom version of the HBA. This function translate the version number
275 * into a human readable string and store it in OptionROMVersion.
278 lpfc_dump_wakeup_param_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmboxq
)
281 uint32_t prog_id_word
;
283 /* character array used for decoding dist type. */
284 char dist_char
[] = "nabx";
286 if (pmboxq
->u
.mb
.mbxStatus
!= MBX_SUCCESS
) {
287 mempool_free(pmboxq
, phba
->mbox_mem_pool
);
291 prg
= (struct prog_id
*) &prog_id_word
;
293 /* word 7 contain option rom version */
294 prog_id_word
= pmboxq
->u
.mb
.un
.varWords
[7];
296 /* Decode the Option rom version word to a readable string */
298 dist
= dist_char
[prg
->dist
];
300 if ((prg
->dist
== 3) && (prg
->num
== 0))
301 sprintf(phba
->OptionROMVersion
, "%d.%d%d",
302 prg
->ver
, prg
->rev
, prg
->lev
);
304 sprintf(phba
->OptionROMVersion
, "%d.%d%d%c%d",
305 prg
->ver
, prg
->rev
, prg
->lev
,
307 mempool_free(pmboxq
, phba
->mbox_mem_pool
);
312 * lpfc_config_port_post - Perform lpfc initialization after config port
313 * @phba: pointer to lpfc hba data structure.
315 * This routine will do LPFC initialization after the CONFIG_PORT mailbox
316 * command call. It performs all internal resource and state setups on the
317 * port: post IOCB buffers, enable appropriate host interrupt attentions,
318 * ELS ring timers, etc.
322 * Any other value - error.
325 lpfc_config_port_post(struct lpfc_hba
*phba
)
327 struct lpfc_vport
*vport
= phba
->pport
;
328 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
331 struct lpfc_dmabuf
*mp
;
332 struct lpfc_sli
*psli
= &phba
->sli
;
333 uint32_t status
, timeout
;
337 spin_lock_irq(&phba
->hbalock
);
339 * If the Config port completed correctly the HBA is not
340 * over heated any more.
342 if (phba
->over_temp_state
== HBA_OVER_TEMP
)
343 phba
->over_temp_state
= HBA_NORMAL_TEMP
;
344 spin_unlock_irq(&phba
->hbalock
);
346 pmb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
348 phba
->link_state
= LPFC_HBA_ERROR
;
353 /* Get login parameters for NID. */
354 rc
= lpfc_read_sparam(phba
, pmb
, 0);
356 mempool_free(pmb
, phba
->mbox_mem_pool
);
361 if (lpfc_sli_issue_mbox(phba
, pmb
, MBX_POLL
) != MBX_SUCCESS
) {
362 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
363 "0448 Adapter failed init, mbxCmd x%x "
364 "READ_SPARM mbxStatus x%x\n",
365 mb
->mbxCommand
, mb
->mbxStatus
);
366 phba
->link_state
= LPFC_HBA_ERROR
;
367 mp
= (struct lpfc_dmabuf
*) pmb
->context1
;
368 mempool_free(pmb
, phba
->mbox_mem_pool
);
369 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
374 mp
= (struct lpfc_dmabuf
*) pmb
->context1
;
376 memcpy(&vport
->fc_sparam
, mp
->virt
, sizeof (struct serv_parm
));
377 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
379 pmb
->context1
= NULL
;
381 if (phba
->cfg_soft_wwnn
)
382 u64_to_wwn(phba
->cfg_soft_wwnn
,
383 vport
->fc_sparam
.nodeName
.u
.wwn
);
384 if (phba
->cfg_soft_wwpn
)
385 u64_to_wwn(phba
->cfg_soft_wwpn
,
386 vport
->fc_sparam
.portName
.u
.wwn
);
387 memcpy(&vport
->fc_nodename
, &vport
->fc_sparam
.nodeName
,
388 sizeof (struct lpfc_name
));
389 memcpy(&vport
->fc_portname
, &vport
->fc_sparam
.portName
,
390 sizeof (struct lpfc_name
));
392 /* Update the fc_host data structures with new wwn. */
393 fc_host_node_name(shost
) = wwn_to_u64(vport
->fc_nodename
.u
.wwn
);
394 fc_host_port_name(shost
) = wwn_to_u64(vport
->fc_portname
.u
.wwn
);
395 fc_host_max_npiv_vports(shost
) = phba
->max_vpi
;
397 /* If no serial number in VPD data, use low 6 bytes of WWNN */
398 /* This should be consolidated into parse_vpd ? - mr */
399 if (phba
->SerialNumber
[0] == 0) {
402 outptr
= &vport
->fc_nodename
.u
.s
.IEEE
[0];
403 for (i
= 0; i
< 12; i
++) {
405 j
= ((status
& 0xf0) >> 4);
407 phba
->SerialNumber
[i
] =
408 (char)((uint8_t) 0x30 + (uint8_t) j
);
410 phba
->SerialNumber
[i
] =
411 (char)((uint8_t) 0x61 + (uint8_t) (j
- 10));
415 phba
->SerialNumber
[i
] =
416 (char)((uint8_t) 0x30 + (uint8_t) j
);
418 phba
->SerialNumber
[i
] =
419 (char)((uint8_t) 0x61 + (uint8_t) (j
- 10));
423 lpfc_read_config(phba
, pmb
);
425 if (lpfc_sli_issue_mbox(phba
, pmb
, MBX_POLL
) != MBX_SUCCESS
) {
426 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
427 "0453 Adapter failed to init, mbxCmd x%x "
428 "READ_CONFIG, mbxStatus x%x\n",
429 mb
->mbxCommand
, mb
->mbxStatus
);
430 phba
->link_state
= LPFC_HBA_ERROR
;
431 mempool_free( pmb
, phba
->mbox_mem_pool
);
435 /* Check if the port is disabled */
436 lpfc_sli_read_link_ste(phba
);
438 /* Reset the DFT_HBA_Q_DEPTH to the max xri */
439 if (phba
->cfg_hba_queue_depth
> (mb
->un
.varRdConfig
.max_xri
+1))
440 phba
->cfg_hba_queue_depth
=
441 (mb
->un
.varRdConfig
.max_xri
+ 1) -
442 lpfc_sli4_get_els_iocb_cnt(phba
);
444 phba
->lmt
= mb
->un
.varRdConfig
.lmt
;
446 /* Get the default values for Model Name and Description */
447 lpfc_get_hba_model_desc(phba
, phba
->ModelName
, phba
->ModelDesc
);
449 if ((phba
->cfg_link_speed
> LPFC_USER_LINK_SPEED_16G
)
450 || ((phba
->cfg_link_speed
== LPFC_USER_LINK_SPEED_1G
)
451 && !(phba
->lmt
& LMT_1Gb
))
452 || ((phba
->cfg_link_speed
== LPFC_USER_LINK_SPEED_2G
)
453 && !(phba
->lmt
& LMT_2Gb
))
454 || ((phba
->cfg_link_speed
== LPFC_USER_LINK_SPEED_4G
)
455 && !(phba
->lmt
& LMT_4Gb
))
456 || ((phba
->cfg_link_speed
== LPFC_USER_LINK_SPEED_8G
)
457 && !(phba
->lmt
& LMT_8Gb
))
458 || ((phba
->cfg_link_speed
== LPFC_USER_LINK_SPEED_10G
)
459 && !(phba
->lmt
& LMT_10Gb
))
460 || ((phba
->cfg_link_speed
== LPFC_USER_LINK_SPEED_16G
)
461 && !(phba
->lmt
& LMT_16Gb
))) {
462 /* Reset link speed to auto */
463 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
464 "1302 Invalid speed for this board: "
465 "Reset link speed to auto: x%x\n",
466 phba
->cfg_link_speed
);
467 phba
->cfg_link_speed
= LPFC_USER_LINK_SPEED_AUTO
;
470 phba
->link_state
= LPFC_LINK_DOWN
;
472 /* Only process IOCBs on ELS ring till hba_state is READY */
473 if (psli
->ring
[psli
->extra_ring
].cmdringaddr
)
474 psli
->ring
[psli
->extra_ring
].flag
|= LPFC_STOP_IOCB_EVENT
;
475 if (psli
->ring
[psli
->fcp_ring
].cmdringaddr
)
476 psli
->ring
[psli
->fcp_ring
].flag
|= LPFC_STOP_IOCB_EVENT
;
477 if (psli
->ring
[psli
->next_ring
].cmdringaddr
)
478 psli
->ring
[psli
->next_ring
].flag
|= LPFC_STOP_IOCB_EVENT
;
480 /* Post receive buffers for desired rings */
481 if (phba
->sli_rev
!= 3)
482 lpfc_post_rcv_buf(phba
);
485 * Configure HBA MSI-X attention conditions to messages if MSI-X mode
487 if (phba
->intr_type
== MSIX
) {
488 rc
= lpfc_config_msi(phba
, pmb
);
490 mempool_free(pmb
, phba
->mbox_mem_pool
);
493 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_POLL
);
494 if (rc
!= MBX_SUCCESS
) {
495 lpfc_printf_log(phba
, KERN_ERR
, LOG_MBOX
,
496 "0352 Config MSI mailbox command "
497 "failed, mbxCmd x%x, mbxStatus x%x\n",
498 pmb
->u
.mb
.mbxCommand
,
499 pmb
->u
.mb
.mbxStatus
);
500 mempool_free(pmb
, phba
->mbox_mem_pool
);
505 spin_lock_irq(&phba
->hbalock
);
506 /* Initialize ERATT handling flag */
507 phba
->hba_flag
&= ~HBA_ERATT_HANDLED
;
509 /* Enable appropriate host interrupts */
510 status
= readl(phba
->HCregaddr
);
511 status
|= HC_MBINT_ENA
| HC_ERINT_ENA
| HC_LAINT_ENA
;
512 if (psli
->num_rings
> 0)
513 status
|= HC_R0INT_ENA
;
514 if (psli
->num_rings
> 1)
515 status
|= HC_R1INT_ENA
;
516 if (psli
->num_rings
> 2)
517 status
|= HC_R2INT_ENA
;
518 if (psli
->num_rings
> 3)
519 status
|= HC_R3INT_ENA
;
521 if ((phba
->cfg_poll
& ENABLE_FCP_RING_POLLING
) &&
522 (phba
->cfg_poll
& DISABLE_FCP_RING_INT
))
523 status
&= ~(HC_R0INT_ENA
);
525 writel(status
, phba
->HCregaddr
);
526 readl(phba
->HCregaddr
); /* flush */
527 spin_unlock_irq(&phba
->hbalock
);
529 /* Set up ring-0 (ELS) timer */
530 timeout
= phba
->fc_ratov
* 2;
531 mod_timer(&vport
->els_tmofunc
, jiffies
+ HZ
* timeout
);
532 /* Set up heart beat (HB) timer */
533 mod_timer(&phba
->hb_tmofunc
, jiffies
+ HZ
* LPFC_HB_MBOX_INTERVAL
);
534 phba
->hb_outstanding
= 0;
535 phba
->last_completion_time
= jiffies
;
536 /* Set up error attention (ERATT) polling timer */
537 mod_timer(&phba
->eratt_poll
, jiffies
+ HZ
* LPFC_ERATT_POLL_INTERVAL
);
539 if (phba
->hba_flag
& LINK_DISABLED
) {
540 lpfc_printf_log(phba
,
542 "2598 Adapter Link is disabled.\n");
543 lpfc_down_link(phba
, pmb
);
544 pmb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
545 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_NOWAIT
);
546 if ((rc
!= MBX_SUCCESS
) && (rc
!= MBX_BUSY
)) {
547 lpfc_printf_log(phba
,
549 "2599 Adapter failed to issue DOWN_LINK"
550 " mbox command rc 0x%x\n", rc
);
552 mempool_free(pmb
, phba
->mbox_mem_pool
);
555 } else if (phba
->cfg_suppress_link_up
== LPFC_INITIALIZE_LINK
) {
556 lpfc_init_link(phba
, pmb
, phba
->cfg_topology
,
557 phba
->cfg_link_speed
);
558 pmb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
559 lpfc_set_loopback_flag(phba
);
560 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_NOWAIT
);
561 if (rc
!= MBX_SUCCESS
) {
562 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
563 "0454 Adapter failed to init, mbxCmd x%x "
564 "INIT_LINK, mbxStatus x%x\n",
565 mb
->mbxCommand
, mb
->mbxStatus
);
567 /* Clear all interrupt enable conditions */
568 writel(0, phba
->HCregaddr
);
569 readl(phba
->HCregaddr
); /* flush */
570 /* Clear all pending interrupts */
571 writel(0xffffffff, phba
->HAregaddr
);
572 readl(phba
->HAregaddr
); /* flush */
574 phba
->link_state
= LPFC_HBA_ERROR
;
576 mempool_free(pmb
, phba
->mbox_mem_pool
);
580 /* MBOX buffer will be freed in mbox compl */
581 pmb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
583 phba
->link_state
= LPFC_HBA_ERROR
;
587 lpfc_config_async(phba
, pmb
, LPFC_ELS_RING
);
588 pmb
->mbox_cmpl
= lpfc_config_async_cmpl
;
589 pmb
->vport
= phba
->pport
;
590 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_NOWAIT
);
592 if ((rc
!= MBX_BUSY
) && (rc
!= MBX_SUCCESS
)) {
593 lpfc_printf_log(phba
,
596 "0456 Adapter failed to issue "
597 "ASYNCEVT_ENABLE mbox status x%x\n",
599 mempool_free(pmb
, phba
->mbox_mem_pool
);
602 /* Get Option rom version */
603 pmb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
605 phba
->link_state
= LPFC_HBA_ERROR
;
609 lpfc_dump_wakeup_param(phba
, pmb
);
610 pmb
->mbox_cmpl
= lpfc_dump_wakeup_param_cmpl
;
611 pmb
->vport
= phba
->pport
;
612 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_NOWAIT
);
614 if ((rc
!= MBX_BUSY
) && (rc
!= MBX_SUCCESS
)) {
615 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
, "0435 Adapter failed "
616 "to get Option ROM version status x%x\n", rc
);
617 mempool_free(pmb
, phba
->mbox_mem_pool
);
624 * lpfc_hba_init_link - Initialize the FC link
625 * @phba: pointer to lpfc hba data structure.
626 * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT
628 * This routine will issue the INIT_LINK mailbox command call.
629 * It is available to other drivers through the lpfc_hba data
630 * structure for use as a delayed link up mechanism with the
631 * module parameter lpfc_suppress_link_up.
635 * Any other value - error
638 lpfc_hba_init_link(struct lpfc_hba
*phba
, uint32_t flag
)
640 struct lpfc_vport
*vport
= phba
->pport
;
645 pmb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
647 phba
->link_state
= LPFC_HBA_ERROR
;
653 lpfc_init_link(phba
, pmb
, phba
->cfg_topology
, phba
->cfg_link_speed
);
654 pmb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
655 lpfc_set_loopback_flag(phba
);
656 rc
= lpfc_sli_issue_mbox(phba
, pmb
, flag
);
657 if ((rc
!= MBX_BUSY
) && (rc
!= MBX_SUCCESS
)) {
658 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
659 "0498 Adapter failed to init, mbxCmd x%x "
660 "INIT_LINK, mbxStatus x%x\n",
661 mb
->mbxCommand
, mb
->mbxStatus
);
662 if (phba
->sli_rev
<= LPFC_SLI_REV3
) {
663 /* Clear all interrupt enable conditions */
664 writel(0, phba
->HCregaddr
);
665 readl(phba
->HCregaddr
); /* flush */
666 /* Clear all pending interrupts */
667 writel(0xffffffff, phba
->HAregaddr
);
668 readl(phba
->HAregaddr
); /* flush */
670 phba
->link_state
= LPFC_HBA_ERROR
;
671 if (rc
!= MBX_BUSY
|| flag
== MBX_POLL
)
672 mempool_free(pmb
, phba
->mbox_mem_pool
);
675 phba
->cfg_suppress_link_up
= LPFC_INITIALIZE_LINK
;
676 if (flag
== MBX_POLL
)
677 mempool_free(pmb
, phba
->mbox_mem_pool
);
683 * lpfc_hba_down_link - this routine downs the FC link
684 * @phba: pointer to lpfc hba data structure.
685 * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT
687 * This routine will issue the DOWN_LINK mailbox command call.
688 * It is available to other drivers through the lpfc_hba data
689 * structure for use to stop the link.
693 * Any other value - error
696 lpfc_hba_down_link(struct lpfc_hba
*phba
, uint32_t flag
)
701 pmb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
703 phba
->link_state
= LPFC_HBA_ERROR
;
707 lpfc_printf_log(phba
,
709 "0491 Adapter Link is disabled.\n");
710 lpfc_down_link(phba
, pmb
);
711 pmb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
712 rc
= lpfc_sli_issue_mbox(phba
, pmb
, flag
);
713 if ((rc
!= MBX_SUCCESS
) && (rc
!= MBX_BUSY
)) {
714 lpfc_printf_log(phba
,
716 "2522 Adapter failed to issue DOWN_LINK"
717 " mbox command rc 0x%x\n", rc
);
719 mempool_free(pmb
, phba
->mbox_mem_pool
);
722 if (flag
== MBX_POLL
)
723 mempool_free(pmb
, phba
->mbox_mem_pool
);
729 * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
730 * @phba: pointer to lpfc HBA data structure.
732 * This routine will do LPFC uninitialization before the HBA is reset when
733 * bringing down the SLI Layer.
737 * Any other value - error.
740 lpfc_hba_down_prep(struct lpfc_hba
*phba
)
742 struct lpfc_vport
**vports
;
745 if (phba
->sli_rev
<= LPFC_SLI_REV3
) {
746 /* Disable interrupts */
747 writel(0, phba
->HCregaddr
);
748 readl(phba
->HCregaddr
); /* flush */
751 if (phba
->pport
->load_flag
& FC_UNLOADING
)
752 lpfc_cleanup_discovery_resources(phba
->pport
);
754 vports
= lpfc_create_vport_work_array(phba
);
756 for (i
= 0; i
<= phba
->max_vports
&&
757 vports
[i
] != NULL
; i
++)
758 lpfc_cleanup_discovery_resources(vports
[i
]);
759 lpfc_destroy_vport_work_array(phba
, vports
);
765 * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
766 * @phba: pointer to lpfc HBA data structure.
768 * This routine will do uninitialization after the HBA is reset when bring
769 * down the SLI Layer.
773 * Any other value - error.
776 lpfc_hba_down_post_s3(struct lpfc_hba
*phba
)
778 struct lpfc_sli
*psli
= &phba
->sli
;
779 struct lpfc_sli_ring
*pring
;
780 struct lpfc_dmabuf
*mp
, *next_mp
;
781 LIST_HEAD(completions
);
784 if (phba
->sli3_options
& LPFC_SLI3_HBQ_ENABLED
)
785 lpfc_sli_hbqbuf_free_all(phba
);
787 /* Cleanup preposted buffers on the ELS ring */
788 pring
= &psli
->ring
[LPFC_ELS_RING
];
789 list_for_each_entry_safe(mp
, next_mp
, &pring
->postbufq
, list
) {
791 pring
->postbufq_cnt
--;
792 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
797 spin_lock_irq(&phba
->hbalock
);
798 for (i
= 0; i
< psli
->num_rings
; i
++) {
799 pring
= &psli
->ring
[i
];
801 /* At this point in time the HBA is either reset or DOA. Either
802 * way, nothing should be on txcmplq as it will NEVER complete.
804 list_splice_init(&pring
->txcmplq
, &completions
);
805 pring
->txcmplq_cnt
= 0;
806 spin_unlock_irq(&phba
->hbalock
);
808 /* Cancel all the IOCBs from the completions list */
809 lpfc_sli_cancel_iocbs(phba
, &completions
, IOSTAT_LOCAL_REJECT
,
812 lpfc_sli_abort_iocb_ring(phba
, pring
);
813 spin_lock_irq(&phba
->hbalock
);
815 spin_unlock_irq(&phba
->hbalock
);
821 * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
822 * @phba: pointer to lpfc HBA data structure.
824 * This routine will do uninitialization after the HBA is reset when bring
825 * down the SLI Layer.
829 * Any other value - error.
832 lpfc_hba_down_post_s4(struct lpfc_hba
*phba
)
834 struct lpfc_scsi_buf
*psb
, *psb_next
;
837 unsigned long iflag
= 0;
838 struct lpfc_sglq
*sglq_entry
= NULL
;
840 ret
= lpfc_hba_down_post_s3(phba
);
843 /* At this point in time the HBA is either reset or DOA. Either
844 * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
845 * on the lpfc_sgl_list so that it can either be freed if the
846 * driver is unloading or reposted if the driver is restarting
849 spin_lock_irq(&phba
->hbalock
); /* required for lpfc_sgl_list and */
851 /* abts_sgl_list_lock required because worker thread uses this
854 spin_lock(&phba
->sli4_hba
.abts_sgl_list_lock
);
855 list_for_each_entry(sglq_entry
,
856 &phba
->sli4_hba
.lpfc_abts_els_sgl_list
, list
)
857 sglq_entry
->state
= SGL_FREED
;
859 list_splice_init(&phba
->sli4_hba
.lpfc_abts_els_sgl_list
,
860 &phba
->sli4_hba
.lpfc_sgl_list
);
861 spin_unlock(&phba
->sli4_hba
.abts_sgl_list_lock
);
862 /* abts_scsi_buf_list_lock required because worker thread uses this
865 spin_lock(&phba
->sli4_hba
.abts_scsi_buf_list_lock
);
866 list_splice_init(&phba
->sli4_hba
.lpfc_abts_scsi_buf_list
,
868 spin_unlock(&phba
->sli4_hba
.abts_scsi_buf_list_lock
);
869 spin_unlock_irq(&phba
->hbalock
);
871 list_for_each_entry_safe(psb
, psb_next
, &aborts
, list
) {
873 psb
->status
= IOSTAT_SUCCESS
;
875 spin_lock_irqsave(&phba
->scsi_buf_list_lock
, iflag
);
876 list_splice(&aborts
, &phba
->lpfc_scsi_buf_list
);
877 spin_unlock_irqrestore(&phba
->scsi_buf_list_lock
, iflag
);
882 * lpfc_hba_down_post - Wrapper func for hba down post routine
883 * @phba: pointer to lpfc HBA data structure.
885 * This routine wraps the actual SLI3 or SLI4 routine for performing
886 * uninitialization after the HBA is reset when bring down the SLI Layer.
890 * Any other value - error.
893 lpfc_hba_down_post(struct lpfc_hba
*phba
)
895 return (*phba
->lpfc_hba_down_post
)(phba
);
899 * lpfc_hb_timeout - The HBA-timer timeout handler
900 * @ptr: unsigned long holds the pointer to lpfc hba data structure.
902 * This is the HBA-timer timeout handler registered to the lpfc driver. When
903 * this timer fires, a HBA timeout event shall be posted to the lpfc driver
904 * work-port-events bitmap and the worker thread is notified. This timeout
905 * event will be used by the worker thread to invoke the actual timeout
906 * handler routine, lpfc_hb_timeout_handler. Any periodical operations will
907 * be performed in the timeout handler and the HBA timeout event bit shall
908 * be cleared by the worker thread after it has taken the event bitmap out.
911 lpfc_hb_timeout(unsigned long ptr
)
913 struct lpfc_hba
*phba
;
917 phba
= (struct lpfc_hba
*)ptr
;
919 /* Check for heart beat timeout conditions */
920 spin_lock_irqsave(&phba
->pport
->work_port_lock
, iflag
);
921 tmo_posted
= phba
->pport
->work_port_events
& WORKER_HB_TMO
;
923 phba
->pport
->work_port_events
|= WORKER_HB_TMO
;
924 spin_unlock_irqrestore(&phba
->pport
->work_port_lock
, iflag
);
926 /* Tell the worker thread there is work to do */
928 lpfc_worker_wake_up(phba
);
933 * lpfc_rrq_timeout - The RRQ-timer timeout handler
934 * @ptr: unsigned long holds the pointer to lpfc hba data structure.
936 * This is the RRQ-timer timeout handler registered to the lpfc driver. When
937 * this timer fires, a RRQ timeout event shall be posted to the lpfc driver
938 * work-port-events bitmap and the worker thread is notified. This timeout
939 * event will be used by the worker thread to invoke the actual timeout
940 * handler routine, lpfc_rrq_handler. Any periodical operations will
941 * be performed in the timeout handler and the RRQ timeout event bit shall
942 * be cleared by the worker thread after it has taken the event bitmap out.
945 lpfc_rrq_timeout(unsigned long ptr
)
947 struct lpfc_hba
*phba
;
950 phba
= (struct lpfc_hba
*)ptr
;
951 spin_lock_irqsave(&phba
->pport
->work_port_lock
, iflag
);
952 phba
->hba_flag
|= HBA_RRQ_ACTIVE
;
953 spin_unlock_irqrestore(&phba
->pport
->work_port_lock
, iflag
);
954 lpfc_worker_wake_up(phba
);
958 * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
959 * @phba: pointer to lpfc hba data structure.
960 * @pmboxq: pointer to the driver internal queue element for mailbox command.
962 * This is the callback function to the lpfc heart-beat mailbox command.
963 * If configured, the lpfc driver issues the heart-beat mailbox command to
964 * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the
965 * heart-beat mailbox command is issued, the driver shall set up heart-beat
966 * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks
967 * heart-beat outstanding state. Once the mailbox command comes back and
968 * no error conditions detected, the heart-beat mailbox command timer is
969 * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding
970 * state is cleared for the next heart-beat. If the timer expired with the
971 * heart-beat outstanding state set, the driver will put the HBA offline.
974 lpfc_hb_mbox_cmpl(struct lpfc_hba
* phba
, LPFC_MBOXQ_t
* pmboxq
)
976 unsigned long drvr_flag
;
978 spin_lock_irqsave(&phba
->hbalock
, drvr_flag
);
979 phba
->hb_outstanding
= 0;
980 spin_unlock_irqrestore(&phba
->hbalock
, drvr_flag
);
982 /* Check and reset heart-beat timer is necessary */
983 mempool_free(pmboxq
, phba
->mbox_mem_pool
);
984 if (!(phba
->pport
->fc_flag
& FC_OFFLINE_MODE
) &&
985 !(phba
->link_state
== LPFC_HBA_ERROR
) &&
986 !(phba
->pport
->load_flag
& FC_UNLOADING
))
987 mod_timer(&phba
->hb_tmofunc
,
988 jiffies
+ HZ
* LPFC_HB_MBOX_INTERVAL
);
993 * lpfc_hb_timeout_handler - The HBA-timer timeout handler
994 * @phba: pointer to lpfc hba data structure.
996 * This is the actual HBA-timer timeout handler to be invoked by the worker
997 * thread whenever the HBA timer fired and HBA-timeout event posted. This
998 * handler performs any periodic operations needed for the device. If such
999 * periodic event has already been attended to either in the interrupt handler
1000 * or by processing slow-ring or fast-ring events within the HBA-timer
1001 * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets
1002 * the timer for the next timeout period. If lpfc heart-beat mailbox command
1003 * is configured and there is no heart-beat mailbox command outstanding, a
1004 * heart-beat mailbox is issued and timer set properly. Otherwise, if there
1005 * has been a heart-beat mailbox command outstanding, the HBA shall be put
1009 lpfc_hb_timeout_handler(struct lpfc_hba
*phba
)
1011 struct lpfc_vport
**vports
;
1012 LPFC_MBOXQ_t
*pmboxq
;
1013 struct lpfc_dmabuf
*buf_ptr
;
1015 struct lpfc_sli
*psli
= &phba
->sli
;
1016 LIST_HEAD(completions
);
1018 vports
= lpfc_create_vport_work_array(phba
);
1020 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++)
1021 lpfc_rcv_seq_check_edtov(vports
[i
]);
1022 lpfc_destroy_vport_work_array(phba
, vports
);
1024 if ((phba
->link_state
== LPFC_HBA_ERROR
) ||
1025 (phba
->pport
->load_flag
& FC_UNLOADING
) ||
1026 (phba
->pport
->fc_flag
& FC_OFFLINE_MODE
))
1029 spin_lock_irq(&phba
->pport
->work_port_lock
);
1031 if (time_after(phba
->last_completion_time
+ LPFC_HB_MBOX_INTERVAL
* HZ
,
1033 spin_unlock_irq(&phba
->pport
->work_port_lock
);
1034 if (!phba
->hb_outstanding
)
1035 mod_timer(&phba
->hb_tmofunc
,
1036 jiffies
+ HZ
* LPFC_HB_MBOX_INTERVAL
);
1038 mod_timer(&phba
->hb_tmofunc
,
1039 jiffies
+ HZ
* LPFC_HB_MBOX_TIMEOUT
);
1042 spin_unlock_irq(&phba
->pport
->work_port_lock
);
1044 if (phba
->elsbuf_cnt
&&
1045 (phba
->elsbuf_cnt
== phba
->elsbuf_prev_cnt
)) {
1046 spin_lock_irq(&phba
->hbalock
);
1047 list_splice_init(&phba
->elsbuf
, &completions
);
1048 phba
->elsbuf_cnt
= 0;
1049 phba
->elsbuf_prev_cnt
= 0;
1050 spin_unlock_irq(&phba
->hbalock
);
1052 while (!list_empty(&completions
)) {
1053 list_remove_head(&completions
, buf_ptr
,
1054 struct lpfc_dmabuf
, list
);
1055 lpfc_mbuf_free(phba
, buf_ptr
->virt
, buf_ptr
->phys
);
1059 phba
->elsbuf_prev_cnt
= phba
->elsbuf_cnt
;
1061 /* If there is no heart beat outstanding, issue a heartbeat command */
1062 if (phba
->cfg_enable_hba_heartbeat
) {
1063 if (!phba
->hb_outstanding
) {
1064 if ((!(psli
->sli_flag
& LPFC_SLI_MBOX_ACTIVE
)) &&
1065 (list_empty(&psli
->mboxq
))) {
1066 pmboxq
= mempool_alloc(phba
->mbox_mem_pool
,
1069 mod_timer(&phba
->hb_tmofunc
,
1071 HZ
* LPFC_HB_MBOX_INTERVAL
);
1075 lpfc_heart_beat(phba
, pmboxq
);
1076 pmboxq
->mbox_cmpl
= lpfc_hb_mbox_cmpl
;
1077 pmboxq
->vport
= phba
->pport
;
1078 retval
= lpfc_sli_issue_mbox(phba
, pmboxq
,
1081 if (retval
!= MBX_BUSY
&&
1082 retval
!= MBX_SUCCESS
) {
1083 mempool_free(pmboxq
,
1084 phba
->mbox_mem_pool
);
1085 mod_timer(&phba
->hb_tmofunc
,
1087 HZ
* LPFC_HB_MBOX_INTERVAL
);
1090 phba
->skipped_hb
= 0;
1091 phba
->hb_outstanding
= 1;
1092 } else if (time_before_eq(phba
->last_completion_time
,
1093 phba
->skipped_hb
)) {
1094 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
1095 "2857 Last completion time not "
1096 " updated in %d ms\n",
1097 jiffies_to_msecs(jiffies
1098 - phba
->last_completion_time
));
1100 phba
->skipped_hb
= jiffies
;
1102 mod_timer(&phba
->hb_tmofunc
,
1103 jiffies
+ HZ
* LPFC_HB_MBOX_TIMEOUT
);
1107 * If heart beat timeout called with hb_outstanding set
1108 * we need to give the hb mailbox cmd a chance to
1111 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
1112 "0459 Adapter heartbeat still out"
1113 "standing:last compl time was %d ms.\n",
1114 jiffies_to_msecs(jiffies
1115 - phba
->last_completion_time
));
1116 mod_timer(&phba
->hb_tmofunc
,
1117 jiffies
+ HZ
* LPFC_HB_MBOX_TIMEOUT
);
1123 * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
1124 * @phba: pointer to lpfc hba data structure.
1126 * This routine is called to bring the HBA offline when HBA hardware error
1127 * other than Port Error 6 has been detected.
1130 lpfc_offline_eratt(struct lpfc_hba
*phba
)
1132 struct lpfc_sli
*psli
= &phba
->sli
;
1134 spin_lock_irq(&phba
->hbalock
);
1135 psli
->sli_flag
&= ~LPFC_SLI_ACTIVE
;
1136 spin_unlock_irq(&phba
->hbalock
);
1137 lpfc_offline_prep(phba
);
1140 lpfc_reset_barrier(phba
);
1141 spin_lock_irq(&phba
->hbalock
);
1142 lpfc_sli_brdreset(phba
);
1143 spin_unlock_irq(&phba
->hbalock
);
1144 lpfc_hba_down_post(phba
);
1145 lpfc_sli_brdready(phba
, HS_MBRDY
);
1146 lpfc_unblock_mgmt_io(phba
);
1147 phba
->link_state
= LPFC_HBA_ERROR
;
1152 * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
1153 * @phba: pointer to lpfc hba data structure.
1155 * This routine is called to bring a SLI4 HBA offline when HBA hardware error
1156 * other than Port Error 6 has been detected.
1159 lpfc_sli4_offline_eratt(struct lpfc_hba
*phba
)
1161 lpfc_offline_prep(phba
);
1163 lpfc_sli4_brdreset(phba
);
1164 lpfc_hba_down_post(phba
);
1165 lpfc_sli4_post_status_check(phba
);
1166 lpfc_unblock_mgmt_io(phba
);
1167 phba
->link_state
= LPFC_HBA_ERROR
;
1171 * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
1172 * @phba: pointer to lpfc hba data structure.
1174 * This routine is invoked to handle the deferred HBA hardware error
1175 * conditions. This type of error is indicated by HBA by setting ER1
1176 * and another ER bit in the host status register. The driver will
1177 * wait until the ER1 bit clears before handling the error condition.
1180 lpfc_handle_deferred_eratt(struct lpfc_hba
*phba
)
1182 uint32_t old_host_status
= phba
->work_hs
;
1183 struct lpfc_sli_ring
*pring
;
1184 struct lpfc_sli
*psli
= &phba
->sli
;
1186 /* If the pci channel is offline, ignore possible errors,
1187 * since we cannot communicate with the pci card anyway.
1189 if (pci_channel_offline(phba
->pcidev
)) {
1190 spin_lock_irq(&phba
->hbalock
);
1191 phba
->hba_flag
&= ~DEFER_ERATT
;
1192 spin_unlock_irq(&phba
->hbalock
);
1196 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
1197 "0479 Deferred Adapter Hardware Error "
1198 "Data: x%x x%x x%x\n",
1200 phba
->work_status
[0], phba
->work_status
[1]);
1202 spin_lock_irq(&phba
->hbalock
);
1203 psli
->sli_flag
&= ~LPFC_SLI_ACTIVE
;
1204 spin_unlock_irq(&phba
->hbalock
);
1208 * Firmware stops when it triggred erratt. That could cause the I/Os
1209 * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
1210 * SCSI layer retry it after re-establishing link.
1212 pring
= &psli
->ring
[psli
->fcp_ring
];
1213 lpfc_sli_abort_iocb_ring(phba
, pring
);
1216 * There was a firmware error. Take the hba offline and then
1217 * attempt to restart it.
1219 lpfc_offline_prep(phba
);
1222 /* Wait for the ER1 bit to clear.*/
1223 while (phba
->work_hs
& HS_FFER1
) {
1225 phba
->work_hs
= readl(phba
->HSregaddr
);
1226 /* If driver is unloading let the worker thread continue */
1227 if (phba
->pport
->load_flag
& FC_UNLOADING
) {
1234 * This is to ptrotect against a race condition in which
1235 * first write to the host attention register clear the
1236 * host status register.
1238 if ((!phba
->work_hs
) && (!(phba
->pport
->load_flag
& FC_UNLOADING
)))
1239 phba
->work_hs
= old_host_status
& ~HS_FFER1
;
1241 spin_lock_irq(&phba
->hbalock
);
1242 phba
->hba_flag
&= ~DEFER_ERATT
;
1243 spin_unlock_irq(&phba
->hbalock
);
1244 phba
->work_status
[0] = readl(phba
->MBslimaddr
+ 0xa8);
1245 phba
->work_status
[1] = readl(phba
->MBslimaddr
+ 0xac);
1249 lpfc_board_errevt_to_mgmt(struct lpfc_hba
*phba
)
1251 struct lpfc_board_event_header board_event
;
1252 struct Scsi_Host
*shost
;
1254 board_event
.event_type
= FC_REG_BOARD_EVENT
;
1255 board_event
.subcategory
= LPFC_EVENT_PORTINTERR
;
1256 shost
= lpfc_shost_from_vport(phba
->pport
);
1257 fc_host_post_vendor_event(shost
, fc_get_event_number(),
1258 sizeof(board_event
),
1259 (char *) &board_event
,
1264 * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
1265 * @phba: pointer to lpfc hba data structure.
1267 * This routine is invoked to handle the following HBA hardware error
1269 * 1 - HBA error attention interrupt
1270 * 2 - DMA ring index out of range
1271 * 3 - Mailbox command came back as unknown
1274 lpfc_handle_eratt_s3(struct lpfc_hba
*phba
)
1276 struct lpfc_vport
*vport
= phba
->pport
;
1277 struct lpfc_sli
*psli
= &phba
->sli
;
1278 struct lpfc_sli_ring
*pring
;
1279 uint32_t event_data
;
1280 unsigned long temperature
;
1281 struct temp_event temp_event_data
;
1282 struct Scsi_Host
*shost
;
1284 /* If the pci channel is offline, ignore possible errors,
1285 * since we cannot communicate with the pci card anyway.
1287 if (pci_channel_offline(phba
->pcidev
)) {
1288 spin_lock_irq(&phba
->hbalock
);
1289 phba
->hba_flag
&= ~DEFER_ERATT
;
1290 spin_unlock_irq(&phba
->hbalock
);
1294 /* If resets are disabled then leave the HBA alone and return */
1295 if (!phba
->cfg_enable_hba_reset
)
1298 /* Send an internal error event to mgmt application */
1299 lpfc_board_errevt_to_mgmt(phba
);
1301 if (phba
->hba_flag
& DEFER_ERATT
)
1302 lpfc_handle_deferred_eratt(phba
);
1304 if ((phba
->work_hs
& HS_FFER6
) || (phba
->work_hs
& HS_FFER8
)) {
1305 if (phba
->work_hs
& HS_FFER6
)
1306 /* Re-establishing Link */
1307 lpfc_printf_log(phba
, KERN_INFO
, LOG_LINK_EVENT
,
1308 "1301 Re-establishing Link "
1309 "Data: x%x x%x x%x\n",
1310 phba
->work_hs
, phba
->work_status
[0],
1311 phba
->work_status
[1]);
1312 if (phba
->work_hs
& HS_FFER8
)
1313 /* Device Zeroization */
1314 lpfc_printf_log(phba
, KERN_INFO
, LOG_LINK_EVENT
,
1315 "2861 Host Authentication device "
1316 "zeroization Data:x%x x%x x%x\n",
1317 phba
->work_hs
, phba
->work_status
[0],
1318 phba
->work_status
[1]);
1320 spin_lock_irq(&phba
->hbalock
);
1321 psli
->sli_flag
&= ~LPFC_SLI_ACTIVE
;
1322 spin_unlock_irq(&phba
->hbalock
);
1325 * Firmware stops when it triggled erratt with HS_FFER6.
1326 * That could cause the I/Os dropped by the firmware.
1327 * Error iocb (I/O) on txcmplq and let the SCSI layer
1328 * retry it after re-establishing link.
1330 pring
= &psli
->ring
[psli
->fcp_ring
];
1331 lpfc_sli_abort_iocb_ring(phba
, pring
);
1334 * There was a firmware error. Take the hba offline and then
1335 * attempt to restart it.
1337 lpfc_offline_prep(phba
);
1339 lpfc_sli_brdrestart(phba
);
1340 if (lpfc_online(phba
) == 0) { /* Initialize the HBA */
1341 lpfc_unblock_mgmt_io(phba
);
1344 lpfc_unblock_mgmt_io(phba
);
1345 } else if (phba
->work_hs
& HS_CRIT_TEMP
) {
1346 temperature
= readl(phba
->MBslimaddr
+ TEMPERATURE_OFFSET
);
1347 temp_event_data
.event_type
= FC_REG_TEMPERATURE_EVENT
;
1348 temp_event_data
.event_code
= LPFC_CRIT_TEMP
;
1349 temp_event_data
.data
= (uint32_t)temperature
;
1351 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
1352 "0406 Adapter maximum temperature exceeded "
1353 "(%ld), taking this port offline "
1354 "Data: x%x x%x x%x\n",
1355 temperature
, phba
->work_hs
,
1356 phba
->work_status
[0], phba
->work_status
[1]);
1358 shost
= lpfc_shost_from_vport(phba
->pport
);
1359 fc_host_post_vendor_event(shost
, fc_get_event_number(),
1360 sizeof(temp_event_data
),
1361 (char *) &temp_event_data
,
1362 SCSI_NL_VID_TYPE_PCI
1363 | PCI_VENDOR_ID_EMULEX
);
1365 spin_lock_irq(&phba
->hbalock
);
1366 phba
->over_temp_state
= HBA_OVER_TEMP
;
1367 spin_unlock_irq(&phba
->hbalock
);
1368 lpfc_offline_eratt(phba
);
1371 /* The if clause above forces this code path when the status
1372 * failure is a value other than FFER6. Do not call the offline
1373 * twice. This is the adapter hardware error path.
1375 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
1376 "0457 Adapter Hardware Error "
1377 "Data: x%x x%x x%x\n",
1379 phba
->work_status
[0], phba
->work_status
[1]);
1381 event_data
= FC_REG_DUMP_EVENT
;
1382 shost
= lpfc_shost_from_vport(vport
);
1383 fc_host_post_vendor_event(shost
, fc_get_event_number(),
1384 sizeof(event_data
), (char *) &event_data
,
1385 SCSI_NL_VID_TYPE_PCI
| PCI_VENDOR_ID_EMULEX
);
1387 lpfc_offline_eratt(phba
);
1393 * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
1394 * @phba: pointer to lpfc hba data structure.
1396 * This routine is invoked to handle the SLI4 HBA hardware error attention
1400 lpfc_handle_eratt_s4(struct lpfc_hba
*phba
)
1402 struct lpfc_vport
*vport
= phba
->pport
;
1403 uint32_t event_data
;
1404 struct Scsi_Host
*shost
;
1406 struct lpfc_register portstat_reg
;
1408 /* If the pci channel is offline, ignore possible errors, since
1409 * we cannot communicate with the pci card anyway.
1411 if (pci_channel_offline(phba
->pcidev
))
1413 /* If resets are disabled then leave the HBA alone and return */
1414 if (!phba
->cfg_enable_hba_reset
)
1417 /* Send an internal error event to mgmt application */
1418 lpfc_board_errevt_to_mgmt(phba
);
1420 /* For now, the actual action for SLI4 device handling is not
1421 * specified yet, just treated it as adaptor hardware failure
1423 event_data
= FC_REG_DUMP_EVENT
;
1424 shost
= lpfc_shost_from_vport(vport
);
1425 fc_host_post_vendor_event(shost
, fc_get_event_number(),
1426 sizeof(event_data
), (char *) &event_data
,
1427 SCSI_NL_VID_TYPE_PCI
| PCI_VENDOR_ID_EMULEX
);
1429 if_type
= bf_get(lpfc_sli_intf_if_type
, &phba
->sli4_hba
.sli_intf
);
1431 case LPFC_SLI_INTF_IF_TYPE_0
:
1432 lpfc_sli4_offline_eratt(phba
);
1434 case LPFC_SLI_INTF_IF_TYPE_2
:
1435 portstat_reg
.word0
=
1436 readl(phba
->sli4_hba
.u
.if_type2
.STATUSregaddr
);
1438 if (bf_get(lpfc_sliport_status_oti
, &portstat_reg
)) {
1439 /* TODO: Register for Overtemp async events. */
1440 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
1441 "2889 Port Overtemperature event, "
1443 spin_lock_irq(&phba
->hbalock
);
1444 phba
->over_temp_state
= HBA_OVER_TEMP
;
1445 spin_unlock_irq(&phba
->hbalock
);
1446 lpfc_sli4_offline_eratt(phba
);
1449 if (bf_get(lpfc_sliport_status_rn
, &portstat_reg
)) {
1451 * TODO: Attempt port recovery via a port reset.
1452 * When fully implemented, the driver should
1453 * attempt to recover the port here and return.
1454 * For now, log an error and take the port offline.
1456 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
1457 "2887 Port Error: Attempting "
1460 lpfc_sli4_offline_eratt(phba
);
1462 case LPFC_SLI_INTF_IF_TYPE_1
:
1469 * lpfc_handle_eratt - Wrapper func for handling hba error attention
1470 * @phba: pointer to lpfc HBA data structure.
1472 * This routine wraps the actual SLI3 or SLI4 hba error attention handling
1473 * routine from the API jump table function pointer from the lpfc_hba struct.
1477 * Any other value - error.
1480 lpfc_handle_eratt(struct lpfc_hba
*phba
)
1482 (*phba
->lpfc_handle_eratt
)(phba
);
1486 * lpfc_handle_latt - The HBA link event handler
1487 * @phba: pointer to lpfc hba data structure.
1489 * This routine is invoked from the worker thread to handle a HBA host
1490 * attention link event.
1493 lpfc_handle_latt(struct lpfc_hba
*phba
)
1495 struct lpfc_vport
*vport
= phba
->pport
;
1496 struct lpfc_sli
*psli
= &phba
->sli
;
1498 volatile uint32_t control
;
1499 struct lpfc_dmabuf
*mp
;
1502 pmb
= (LPFC_MBOXQ_t
*)mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
1505 goto lpfc_handle_latt_err_exit
;
1508 mp
= kmalloc(sizeof(struct lpfc_dmabuf
), GFP_KERNEL
);
1511 goto lpfc_handle_latt_free_pmb
;
1514 mp
->virt
= lpfc_mbuf_alloc(phba
, 0, &mp
->phys
);
1517 goto lpfc_handle_latt_free_mp
;
1520 /* Cleanup any outstanding ELS commands */
1521 lpfc_els_flush_all_cmd(phba
);
1523 psli
->slistat
.link_event
++;
1524 lpfc_read_topology(phba
, pmb
, mp
);
1525 pmb
->mbox_cmpl
= lpfc_mbx_cmpl_read_topology
;
1527 /* Block ELS IOCBs until we have processed this mbox command */
1528 phba
->sli
.ring
[LPFC_ELS_RING
].flag
|= LPFC_STOP_IOCB_EVENT
;
1529 rc
= lpfc_sli_issue_mbox (phba
, pmb
, MBX_NOWAIT
);
1530 if (rc
== MBX_NOT_FINISHED
) {
1532 goto lpfc_handle_latt_free_mbuf
;
1535 /* Clear Link Attention in HA REG */
1536 spin_lock_irq(&phba
->hbalock
);
1537 writel(HA_LATT
, phba
->HAregaddr
);
1538 readl(phba
->HAregaddr
); /* flush */
1539 spin_unlock_irq(&phba
->hbalock
);
1543 lpfc_handle_latt_free_mbuf
:
1544 phba
->sli
.ring
[LPFC_ELS_RING
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
1545 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
1546 lpfc_handle_latt_free_mp
:
1548 lpfc_handle_latt_free_pmb
:
1549 mempool_free(pmb
, phba
->mbox_mem_pool
);
1550 lpfc_handle_latt_err_exit
:
1551 /* Enable Link attention interrupts */
1552 spin_lock_irq(&phba
->hbalock
);
1553 psli
->sli_flag
|= LPFC_PROCESS_LA
;
1554 control
= readl(phba
->HCregaddr
);
1555 control
|= HC_LAINT_ENA
;
1556 writel(control
, phba
->HCregaddr
);
1557 readl(phba
->HCregaddr
); /* flush */
1559 /* Clear Link Attention in HA REG */
1560 writel(HA_LATT
, phba
->HAregaddr
);
1561 readl(phba
->HAregaddr
); /* flush */
1562 spin_unlock_irq(&phba
->hbalock
);
1563 lpfc_linkdown(phba
);
1564 phba
->link_state
= LPFC_HBA_ERROR
;
1566 lpfc_printf_log(phba
, KERN_ERR
, LOG_MBOX
,
1567 "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc
);
1573 * lpfc_parse_vpd - Parse VPD (Vital Product Data)
1574 * @phba: pointer to lpfc hba data structure.
1575 * @vpd: pointer to the vital product data.
1576 * @len: length of the vital product data in bytes.
1578 * This routine parses the Vital Product Data (VPD). The VPD is treated as
1579 * an array of characters. In this routine, the ModelName, ProgramType, and
1580 * ModelDesc, etc. fields of the phba data structure will be populated.
1583 * 0 - pointer to the VPD passed in is NULL
1587 lpfc_parse_vpd(struct lpfc_hba
*phba
, uint8_t *vpd
, int len
)
1589 uint8_t lenlo
, lenhi
;
1599 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
1600 "0455 Vital Product Data: x%x x%x x%x x%x\n",
1601 (uint32_t) vpd
[0], (uint32_t) vpd
[1], (uint32_t) vpd
[2],
1603 while (!finished
&& (index
< (len
- 4))) {
1604 switch (vpd
[index
]) {
1612 i
= ((((unsigned short)lenhi
) << 8) + lenlo
);
1621 Length
= ((((unsigned short)lenhi
) << 8) + lenlo
);
1622 if (Length
> len
- index
)
1623 Length
= len
- index
;
1624 while (Length
> 0) {
1625 /* Look for Serial Number */
1626 if ((vpd
[index
] == 'S') && (vpd
[index
+1] == 'N')) {
1633 phba
->SerialNumber
[j
++] = vpd
[index
++];
1637 phba
->SerialNumber
[j
] = 0;
1640 else if ((vpd
[index
] == 'V') && (vpd
[index
+1] == '1')) {
1641 phba
->vpd_flag
|= VPD_MODEL_DESC
;
1648 phba
->ModelDesc
[j
++] = vpd
[index
++];
1652 phba
->ModelDesc
[j
] = 0;
1655 else if ((vpd
[index
] == 'V') && (vpd
[index
+1] == '2')) {
1656 phba
->vpd_flag
|= VPD_MODEL_NAME
;
1663 phba
->ModelName
[j
++] = vpd
[index
++];
1667 phba
->ModelName
[j
] = 0;
1670 else if ((vpd
[index
] == 'V') && (vpd
[index
+1] == '3')) {
1671 phba
->vpd_flag
|= VPD_PROGRAM_TYPE
;
1678 phba
->ProgramType
[j
++] = vpd
[index
++];
1682 phba
->ProgramType
[j
] = 0;
1685 else if ((vpd
[index
] == 'V') && (vpd
[index
+1] == '4')) {
1686 phba
->vpd_flag
|= VPD_PORT
;
1693 phba
->Port
[j
++] = vpd
[index
++];
1723 * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
1724 * @phba: pointer to lpfc hba data structure.
1725 * @mdp: pointer to the data structure to hold the derived model name.
1726 * @descp: pointer to the data structure to hold the derived description.
1728 * This routine retrieves HBA's description based on its registered PCI device
1729 * ID. The @descp passed into this function points to an array of 256 chars. It
1730 * shall be returned with the model name, maximum speed, and the host bus type.
1731 * The @mdp passed into this function points to an array of 80 chars. When the
1732 * function returns, the @mdp will be filled with the model name.
1735 lpfc_get_hba_model_desc(struct lpfc_hba
*phba
, uint8_t *mdp
, uint8_t *descp
)
1738 uint16_t dev_id
= phba
->pcidev
->device
;
1741 int oneConnect
= 0; /* default is not a oneConnect */
1746 } m
= {"<Unknown>", "", ""};
1748 if (mdp
&& mdp
[0] != '\0'
1749 && descp
&& descp
[0] != '\0')
1752 if (phba
->lmt
& LMT_10Gb
)
1754 else if (phba
->lmt
& LMT_8Gb
)
1756 else if (phba
->lmt
& LMT_4Gb
)
1758 else if (phba
->lmt
& LMT_2Gb
)
1766 case PCI_DEVICE_ID_FIREFLY
:
1767 m
= (typeof(m
)){"LP6000", "PCI", "Fibre Channel Adapter"};
1769 case PCI_DEVICE_ID_SUPERFLY
:
1770 if (vp
->rev
.biuRev
>= 1 && vp
->rev
.biuRev
<= 3)
1771 m
= (typeof(m
)){"LP7000", "PCI",
1772 "Fibre Channel Adapter"};
1774 m
= (typeof(m
)){"LP7000E", "PCI",
1775 "Fibre Channel Adapter"};
1777 case PCI_DEVICE_ID_DRAGONFLY
:
1778 m
= (typeof(m
)){"LP8000", "PCI",
1779 "Fibre Channel Adapter"};
1781 case PCI_DEVICE_ID_CENTAUR
:
1782 if (FC_JEDEC_ID(vp
->rev
.biuRev
) == CENTAUR_2G_JEDEC_ID
)
1783 m
= (typeof(m
)){"LP9002", "PCI",
1784 "Fibre Channel Adapter"};
1786 m
= (typeof(m
)){"LP9000", "PCI",
1787 "Fibre Channel Adapter"};
1789 case PCI_DEVICE_ID_RFLY
:
1790 m
= (typeof(m
)){"LP952", "PCI",
1791 "Fibre Channel Adapter"};
1793 case PCI_DEVICE_ID_PEGASUS
:
1794 m
= (typeof(m
)){"LP9802", "PCI-X",
1795 "Fibre Channel Adapter"};
1797 case PCI_DEVICE_ID_THOR
:
1798 m
= (typeof(m
)){"LP10000", "PCI-X",
1799 "Fibre Channel Adapter"};
1801 case PCI_DEVICE_ID_VIPER
:
1802 m
= (typeof(m
)){"LPX1000", "PCI-X",
1803 "Fibre Channel Adapter"};
1805 case PCI_DEVICE_ID_PFLY
:
1806 m
= (typeof(m
)){"LP982", "PCI-X",
1807 "Fibre Channel Adapter"};
1809 case PCI_DEVICE_ID_TFLY
:
1810 m
= (typeof(m
)){"LP1050", "PCI-X",
1811 "Fibre Channel Adapter"};
1813 case PCI_DEVICE_ID_HELIOS
:
1814 m
= (typeof(m
)){"LP11000", "PCI-X2",
1815 "Fibre Channel Adapter"};
1817 case PCI_DEVICE_ID_HELIOS_SCSP
:
1818 m
= (typeof(m
)){"LP11000-SP", "PCI-X2",
1819 "Fibre Channel Adapter"};
1821 case PCI_DEVICE_ID_HELIOS_DCSP
:
1822 m
= (typeof(m
)){"LP11002-SP", "PCI-X2",
1823 "Fibre Channel Adapter"};
1825 case PCI_DEVICE_ID_NEPTUNE
:
1826 m
= (typeof(m
)){"LPe1000", "PCIe", "Fibre Channel Adapter"};
1828 case PCI_DEVICE_ID_NEPTUNE_SCSP
:
1829 m
= (typeof(m
)){"LPe1000-SP", "PCIe", "Fibre Channel Adapter"};
1831 case PCI_DEVICE_ID_NEPTUNE_DCSP
:
1832 m
= (typeof(m
)){"LPe1002-SP", "PCIe", "Fibre Channel Adapter"};
1834 case PCI_DEVICE_ID_BMID
:
1835 m
= (typeof(m
)){"LP1150", "PCI-X2", "Fibre Channel Adapter"};
1837 case PCI_DEVICE_ID_BSMB
:
1838 m
= (typeof(m
)){"LP111", "PCI-X2", "Fibre Channel Adapter"};
1840 case PCI_DEVICE_ID_ZEPHYR
:
1841 m
= (typeof(m
)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
1843 case PCI_DEVICE_ID_ZEPHYR_SCSP
:
1844 m
= (typeof(m
)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
1846 case PCI_DEVICE_ID_ZEPHYR_DCSP
:
1847 m
= (typeof(m
)){"LP2105", "PCIe", "FCoE Adapter"};
1850 case PCI_DEVICE_ID_ZMID
:
1851 m
= (typeof(m
)){"LPe1150", "PCIe", "Fibre Channel Adapter"};
1853 case PCI_DEVICE_ID_ZSMB
:
1854 m
= (typeof(m
)){"LPe111", "PCIe", "Fibre Channel Adapter"};
1856 case PCI_DEVICE_ID_LP101
:
1857 m
= (typeof(m
)){"LP101", "PCI-X", "Fibre Channel Adapter"};
1859 case PCI_DEVICE_ID_LP10000S
:
1860 m
= (typeof(m
)){"LP10000-S", "PCI", "Fibre Channel Adapter"};
1862 case PCI_DEVICE_ID_LP11000S
:
1863 m
= (typeof(m
)){"LP11000-S", "PCI-X2", "Fibre Channel Adapter"};
1865 case PCI_DEVICE_ID_LPE11000S
:
1866 m
= (typeof(m
)){"LPe11000-S", "PCIe", "Fibre Channel Adapter"};
1868 case PCI_DEVICE_ID_SAT
:
1869 m
= (typeof(m
)){"LPe12000", "PCIe", "Fibre Channel Adapter"};
1871 case PCI_DEVICE_ID_SAT_MID
:
1872 m
= (typeof(m
)){"LPe1250", "PCIe", "Fibre Channel Adapter"};
1874 case PCI_DEVICE_ID_SAT_SMB
:
1875 m
= (typeof(m
)){"LPe121", "PCIe", "Fibre Channel Adapter"};
1877 case PCI_DEVICE_ID_SAT_DCSP
:
1878 m
= (typeof(m
)){"LPe12002-SP", "PCIe", "Fibre Channel Adapter"};
1880 case PCI_DEVICE_ID_SAT_SCSP
:
1881 m
= (typeof(m
)){"LPe12000-SP", "PCIe", "Fibre Channel Adapter"};
1883 case PCI_DEVICE_ID_SAT_S
:
1884 m
= (typeof(m
)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"};
1886 case PCI_DEVICE_ID_HORNET
:
1887 m
= (typeof(m
)){"LP21000", "PCIe", "FCoE Adapter"};
1890 case PCI_DEVICE_ID_PROTEUS_VF
:
1891 m
= (typeof(m
)){"LPev12000", "PCIe IOV",
1892 "Fibre Channel Adapter"};
1894 case PCI_DEVICE_ID_PROTEUS_PF
:
1895 m
= (typeof(m
)){"LPev12000", "PCIe IOV",
1896 "Fibre Channel Adapter"};
1898 case PCI_DEVICE_ID_PROTEUS_S
:
1899 m
= (typeof(m
)){"LPemv12002-S", "PCIe IOV",
1900 "Fibre Channel Adapter"};
1902 case PCI_DEVICE_ID_TIGERSHARK
:
1904 m
= (typeof(m
)){"OCe10100", "PCIe", "FCoE"};
1906 case PCI_DEVICE_ID_TOMCAT
:
1908 m
= (typeof(m
)){"OCe11100", "PCIe", "FCoE"};
1910 case PCI_DEVICE_ID_FALCON
:
1911 m
= (typeof(m
)){"LPSe12002-ML1-E", "PCIe",
1912 "EmulexSecure Fibre"};
1914 case PCI_DEVICE_ID_BALIUS
:
1915 m
= (typeof(m
)){"LPVe12002", "PCIe Shared I/O",
1916 "Fibre Channel Adapter"};
1918 case PCI_DEVICE_ID_LANCER_FC
:
1920 m
= (typeof(m
)){"Undefined", "PCIe", "Fibre Channel Adapter"};
1922 case PCI_DEVICE_ID_LANCER_FCOE
:
1924 m
= (typeof(m
)){"Undefined", "PCIe", "FCoE"};
1927 m
= (typeof(m
)){"Unknown", "", ""};
1931 if (mdp
&& mdp
[0] == '\0')
1932 snprintf(mdp
, 79,"%s", m
.name
);
1933 /* oneConnect hba requires special processing, they are all initiators
1934 * and we put the port number on the end
1936 if (descp
&& descp
[0] == '\0') {
1938 snprintf(descp
, 255,
1939 "Emulex OneConnect %s, %s Initiator, Port %s",
1943 snprintf(descp
, 255,
1944 "Emulex %s %d%s %s %s",
1945 m
.name
, max_speed
, (GE
) ? "GE" : "Gb",
1951 * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
1952 * @phba: pointer to lpfc hba data structure.
1953 * @pring: pointer to a IOCB ring.
1954 * @cnt: the number of IOCBs to be posted to the IOCB ring.
1956 * This routine posts a given number of IOCBs with the associated DMA buffer
1957 * descriptors specified by the cnt argument to the given IOCB ring.
1960 * The number of IOCBs NOT able to be posted to the IOCB ring.
1963 lpfc_post_buffer(struct lpfc_hba
*phba
, struct lpfc_sli_ring
*pring
, int cnt
)
1966 struct lpfc_iocbq
*iocb
;
1967 struct lpfc_dmabuf
*mp1
, *mp2
;
1969 cnt
+= pring
->missbufcnt
;
1971 /* While there are buffers to post */
1973 /* Allocate buffer for command iocb */
1974 iocb
= lpfc_sli_get_iocbq(phba
);
1976 pring
->missbufcnt
= cnt
;
1981 /* 2 buffers can be posted per command */
1982 /* Allocate buffer to post */
1983 mp1
= kmalloc(sizeof (struct lpfc_dmabuf
), GFP_KERNEL
);
1985 mp1
->virt
= lpfc_mbuf_alloc(phba
, MEM_PRI
, &mp1
->phys
);
1986 if (!mp1
|| !mp1
->virt
) {
1988 lpfc_sli_release_iocbq(phba
, iocb
);
1989 pring
->missbufcnt
= cnt
;
1993 INIT_LIST_HEAD(&mp1
->list
);
1994 /* Allocate buffer to post */
1996 mp2
= kmalloc(sizeof (struct lpfc_dmabuf
), GFP_KERNEL
);
1998 mp2
->virt
= lpfc_mbuf_alloc(phba
, MEM_PRI
,
2000 if (!mp2
|| !mp2
->virt
) {
2002 lpfc_mbuf_free(phba
, mp1
->virt
, mp1
->phys
);
2004 lpfc_sli_release_iocbq(phba
, iocb
);
2005 pring
->missbufcnt
= cnt
;
2009 INIT_LIST_HEAD(&mp2
->list
);
2014 icmd
->un
.cont64
[0].addrHigh
= putPaddrHigh(mp1
->phys
);
2015 icmd
->un
.cont64
[0].addrLow
= putPaddrLow(mp1
->phys
);
2016 icmd
->un
.cont64
[0].tus
.f
.bdeSize
= FCELSSIZE
;
2017 icmd
->ulpBdeCount
= 1;
2020 icmd
->un
.cont64
[1].addrHigh
= putPaddrHigh(mp2
->phys
);
2021 icmd
->un
.cont64
[1].addrLow
= putPaddrLow(mp2
->phys
);
2022 icmd
->un
.cont64
[1].tus
.f
.bdeSize
= FCELSSIZE
;
2024 icmd
->ulpBdeCount
= 2;
2027 icmd
->ulpCommand
= CMD_QUE_RING_BUF64_CN
;
2030 if (lpfc_sli_issue_iocb(phba
, pring
->ringno
, iocb
, 0) ==
2032 lpfc_mbuf_free(phba
, mp1
->virt
, mp1
->phys
);
2036 lpfc_mbuf_free(phba
, mp2
->virt
, mp2
->phys
);
2040 lpfc_sli_release_iocbq(phba
, iocb
);
2041 pring
->missbufcnt
= cnt
;
2044 lpfc_sli_ringpostbuf_put(phba
, pring
, mp1
);
2046 lpfc_sli_ringpostbuf_put(phba
, pring
, mp2
);
2048 pring
->missbufcnt
= 0;
2053 * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
2054 * @phba: pointer to lpfc hba data structure.
2056 * This routine posts initial receive IOCB buffers to the ELS ring. The
2057 * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is
2061 * 0 - success (currently always success)
2064 lpfc_post_rcv_buf(struct lpfc_hba
*phba
)
2066 struct lpfc_sli
*psli
= &phba
->sli
;
2068 /* Ring 0, ELS / CT buffers */
2069 lpfc_post_buffer(phba
, &psli
->ring
[LPFC_ELS_RING
], LPFC_BUF_RING0
);
2070 /* Ring 2 - FCP no buffers needed */
2075 #define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
2078 * lpfc_sha_init - Set up initial array of hash table entries
2079 * @HashResultPointer: pointer to an array as hash table.
2081 * This routine sets up the initial values to the array of hash table entries
2085 lpfc_sha_init(uint32_t * HashResultPointer
)
2087 HashResultPointer
[0] = 0x67452301;
2088 HashResultPointer
[1] = 0xEFCDAB89;
2089 HashResultPointer
[2] = 0x98BADCFE;
2090 HashResultPointer
[3] = 0x10325476;
2091 HashResultPointer
[4] = 0xC3D2E1F0;
2095 * lpfc_sha_iterate - Iterate initial hash table with the working hash table
2096 * @HashResultPointer: pointer to an initial/result hash table.
2097 * @HashWorkingPointer: pointer to an working hash table.
2099 * This routine iterates an initial hash table pointed by @HashResultPointer
2100 * with the values from the working hash table pointeed by @HashWorkingPointer.
2101 * The results are putting back to the initial hash table, returned through
2102 * the @HashResultPointer as the result hash table.
2105 lpfc_sha_iterate(uint32_t * HashResultPointer
, uint32_t * HashWorkingPointer
)
2109 uint32_t A
, B
, C
, D
, E
;
2112 HashWorkingPointer
[t
] =
2114 HashWorkingPointer
[t
- 3] ^ HashWorkingPointer
[t
-
2116 HashWorkingPointer
[t
- 14] ^ HashWorkingPointer
[t
- 16]);
2117 } while (++t
<= 79);
2119 A
= HashResultPointer
[0];
2120 B
= HashResultPointer
[1];
2121 C
= HashResultPointer
[2];
2122 D
= HashResultPointer
[3];
2123 E
= HashResultPointer
[4];
2127 TEMP
= ((B
& C
) | ((~B
) & D
)) + 0x5A827999;
2128 } else if (t
< 40) {
2129 TEMP
= (B
^ C
^ D
) + 0x6ED9EBA1;
2130 } else if (t
< 60) {
2131 TEMP
= ((B
& C
) | (B
& D
) | (C
& D
)) + 0x8F1BBCDC;
2133 TEMP
= (B
^ C
^ D
) + 0xCA62C1D6;
2135 TEMP
+= S(5, A
) + E
+ HashWorkingPointer
[t
];
2141 } while (++t
<= 79);
2143 HashResultPointer
[0] += A
;
2144 HashResultPointer
[1] += B
;
2145 HashResultPointer
[2] += C
;
2146 HashResultPointer
[3] += D
;
2147 HashResultPointer
[4] += E
;
2152 * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
2153 * @RandomChallenge: pointer to the entry of host challenge random number array.
2154 * @HashWorking: pointer to the entry of the working hash array.
2156 * This routine calculates the working hash array referred by @HashWorking
2157 * from the challenge random numbers associated with the host, referred by
2158 * @RandomChallenge. The result is put into the entry of the working hash
2159 * array and returned by reference through @HashWorking.
2162 lpfc_challenge_key(uint32_t * RandomChallenge
, uint32_t * HashWorking
)
2164 *HashWorking
= (*RandomChallenge
^ *HashWorking
);
2168 * lpfc_hba_init - Perform special handling for LC HBA initialization
2169 * @phba: pointer to lpfc hba data structure.
2170 * @hbainit: pointer to an array of unsigned 32-bit integers.
2172 * This routine performs the special handling for LC HBA initialization.
2175 lpfc_hba_init(struct lpfc_hba
*phba
, uint32_t *hbainit
)
2178 uint32_t *HashWorking
;
2179 uint32_t *pwwnn
= (uint32_t *) phba
->wwnn
;
2181 HashWorking
= kcalloc(80, sizeof(uint32_t), GFP_KERNEL
);
2185 HashWorking
[0] = HashWorking
[78] = *pwwnn
++;
2186 HashWorking
[1] = HashWorking
[79] = *pwwnn
;
2188 for (t
= 0; t
< 7; t
++)
2189 lpfc_challenge_key(phba
->RandomData
+ t
, HashWorking
+ t
);
2191 lpfc_sha_init(hbainit
);
2192 lpfc_sha_iterate(hbainit
, HashWorking
);
2197 * lpfc_cleanup - Performs vport cleanups before deleting a vport
2198 * @vport: pointer to a virtual N_Port data structure.
2200 * This routine performs the necessary cleanups before deleting the @vport.
2201 * It invokes the discovery state machine to perform necessary state
2202 * transitions and to release the ndlps associated with the @vport. Note,
2203 * the physical port is treated as @vport 0.
2206 lpfc_cleanup(struct lpfc_vport
*vport
)
2208 struct lpfc_hba
*phba
= vport
->phba
;
2209 struct lpfc_nodelist
*ndlp
, *next_ndlp
;
2212 if (phba
->link_state
> LPFC_LINK_DOWN
)
2213 lpfc_port_link_failure(vport
);
2215 list_for_each_entry_safe(ndlp
, next_ndlp
, &vport
->fc_nodes
, nlp_listp
) {
2216 if (!NLP_CHK_NODE_ACT(ndlp
)) {
2217 ndlp
= lpfc_enable_node(vport
, ndlp
,
2218 NLP_STE_UNUSED_NODE
);
2221 spin_lock_irq(&phba
->ndlp_lock
);
2222 NLP_SET_FREE_REQ(ndlp
);
2223 spin_unlock_irq(&phba
->ndlp_lock
);
2224 /* Trigger the release of the ndlp memory */
2228 spin_lock_irq(&phba
->ndlp_lock
);
2229 if (NLP_CHK_FREE_REQ(ndlp
)) {
2230 /* The ndlp should not be in memory free mode already */
2231 spin_unlock_irq(&phba
->ndlp_lock
);
2234 /* Indicate request for freeing ndlp memory */
2235 NLP_SET_FREE_REQ(ndlp
);
2236 spin_unlock_irq(&phba
->ndlp_lock
);
2238 if (vport
->port_type
!= LPFC_PHYSICAL_PORT
&&
2239 ndlp
->nlp_DID
== Fabric_DID
) {
2240 /* Just free up ndlp with Fabric_DID for vports */
2245 if (ndlp
->nlp_type
& NLP_FABRIC
)
2246 lpfc_disc_state_machine(vport
, ndlp
, NULL
,
2247 NLP_EVT_DEVICE_RECOVERY
);
2249 lpfc_disc_state_machine(vport
, ndlp
, NULL
,
2254 /* At this point, ALL ndlp's should be gone
2255 * because of the previous NLP_EVT_DEVICE_RM.
2256 * Lets wait for this to happen, if needed.
2258 while (!list_empty(&vport
->fc_nodes
)) {
2260 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
2261 "0233 Nodelist not empty\n");
2262 list_for_each_entry_safe(ndlp
, next_ndlp
,
2263 &vport
->fc_nodes
, nlp_listp
) {
2264 lpfc_printf_vlog(ndlp
->vport
, KERN_ERR
,
2266 "0282 did:x%x ndlp:x%p "
2267 "usgmap:x%x refcnt:%d\n",
2268 ndlp
->nlp_DID
, (void *)ndlp
,
2271 &ndlp
->kref
.refcount
));
2276 /* Wait for any activity on ndlps to settle */
2279 lpfc_cleanup_vports_rrqs(vport
, NULL
);
2283 * lpfc_stop_vport_timers - Stop all the timers associated with a vport
2284 * @vport: pointer to a virtual N_Port data structure.
2286 * This routine stops all the timers associated with a @vport. This function
2287 * is invoked before disabling or deleting a @vport. Note that the physical
2288 * port is treated as @vport 0.
2291 lpfc_stop_vport_timers(struct lpfc_vport
*vport
)
2293 del_timer_sync(&vport
->els_tmofunc
);
2294 del_timer_sync(&vport
->fc_fdmitmo
);
2295 del_timer_sync(&vport
->delayed_disc_tmo
);
2296 lpfc_can_disctmo(vport
);
2301 * __lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer
2302 * @phba: pointer to lpfc hba data structure.
2304 * This routine stops the SLI4 FCF rediscover wait timer if it's on. The
2305 * caller of this routine should already hold the host lock.
2308 __lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba
*phba
)
2310 /* Clear pending FCF rediscovery wait flag */
2311 phba
->fcf
.fcf_flag
&= ~FCF_REDISC_PEND
;
2313 /* Now, try to stop the timer */
2314 del_timer(&phba
->fcf
.redisc_wait
);
2318 * lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer
2319 * @phba: pointer to lpfc hba data structure.
2321 * This routine stops the SLI4 FCF rediscover wait timer if it's on. It
2322 * checks whether the FCF rediscovery wait timer is pending with the host
2323 * lock held before proceeding with disabling the timer and clearing the
2324 * wait timer pendig flag.
2327 lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba
*phba
)
2329 spin_lock_irq(&phba
->hbalock
);
2330 if (!(phba
->fcf
.fcf_flag
& FCF_REDISC_PEND
)) {
2331 /* FCF rediscovery timer already fired or stopped */
2332 spin_unlock_irq(&phba
->hbalock
);
2335 __lpfc_sli4_stop_fcf_redisc_wait_timer(phba
);
2336 /* Clear failover in progress flags */
2337 phba
->fcf
.fcf_flag
&= ~(FCF_DEAD_DISC
| FCF_ACVL_DISC
);
2338 spin_unlock_irq(&phba
->hbalock
);
2342 * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
2343 * @phba: pointer to lpfc hba data structure.
2345 * This routine stops all the timers associated with a HBA. This function is
2346 * invoked before either putting a HBA offline or unloading the driver.
2349 lpfc_stop_hba_timers(struct lpfc_hba
*phba
)
2351 lpfc_stop_vport_timers(phba
->pport
);
2352 del_timer_sync(&phba
->sli
.mbox_tmo
);
2353 del_timer_sync(&phba
->fabric_block_timer
);
2354 del_timer_sync(&phba
->eratt_poll
);
2355 del_timer_sync(&phba
->hb_tmofunc
);
2356 if (phba
->sli_rev
== LPFC_SLI_REV4
) {
2357 del_timer_sync(&phba
->rrq_tmr
);
2358 phba
->hba_flag
&= ~HBA_RRQ_ACTIVE
;
2360 phba
->hb_outstanding
= 0;
2362 switch (phba
->pci_dev_grp
) {
2363 case LPFC_PCI_DEV_LP
:
2364 /* Stop any LightPulse device specific driver timers */
2365 del_timer_sync(&phba
->fcp_poll_timer
);
2367 case LPFC_PCI_DEV_OC
:
2368 /* Stop any OneConnect device sepcific driver timers */
2369 lpfc_sli4_stop_fcf_redisc_wait_timer(phba
);
2372 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
2373 "0297 Invalid device group (x%x)\n",
2381 * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
2382 * @phba: pointer to lpfc hba data structure.
2384 * This routine marks a HBA's management interface as blocked. Once the HBA's
2385 * management interface is marked as blocked, all the user space access to
2386 * the HBA, whether they are from sysfs interface or libdfc interface will
2387 * all be blocked. The HBA is set to block the management interface when the
2388 * driver prepares the HBA interface for online or offline.
2391 lpfc_block_mgmt_io(struct lpfc_hba
* phba
)
2393 unsigned long iflag
;
2394 uint8_t actcmd
= MBX_HEARTBEAT
;
2395 unsigned long timeout
;
2398 spin_lock_irqsave(&phba
->hbalock
, iflag
);
2399 phba
->sli
.sli_flag
|= LPFC_BLOCK_MGMT_IO
;
2400 if (phba
->sli
.mbox_active
)
2401 actcmd
= phba
->sli
.mbox_active
->u
.mb
.mbxCommand
;
2402 spin_unlock_irqrestore(&phba
->hbalock
, iflag
);
2403 /* Determine how long we might wait for the active mailbox
2404 * command to be gracefully completed by firmware.
2406 timeout
= msecs_to_jiffies(lpfc_mbox_tmo_val(phba
, actcmd
) * 1000) +
2408 /* Wait for the outstnading mailbox command to complete */
2409 while (phba
->sli
.mbox_active
) {
2410 /* Check active mailbox complete status every 2ms */
2412 if (time_after(jiffies
, timeout
)) {
2413 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
2414 "2813 Mgmt IO is Blocked %x "
2415 "- mbox cmd %x still active\n",
2416 phba
->sli
.sli_flag
, actcmd
);
2423 * lpfc_online - Initialize and bring a HBA online
2424 * @phba: pointer to lpfc hba data structure.
2426 * This routine initializes the HBA and brings a HBA online. During this
2427 * process, the management interface is blocked to prevent user space access
2428 * to the HBA interfering with the driver initialization.
2435 lpfc_online(struct lpfc_hba
*phba
)
2437 struct lpfc_vport
*vport
;
2438 struct lpfc_vport
**vports
;
2443 vport
= phba
->pport
;
2445 if (!(vport
->fc_flag
& FC_OFFLINE_MODE
))
2448 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
2449 "0458 Bring Adapter online\n");
2451 lpfc_block_mgmt_io(phba
);
2453 if (!lpfc_sli_queue_setup(phba
)) {
2454 lpfc_unblock_mgmt_io(phba
);
2458 if (phba
->sli_rev
== LPFC_SLI_REV4
) {
2459 if (lpfc_sli4_hba_setup(phba
)) { /* Initialize SLI4 HBA */
2460 lpfc_unblock_mgmt_io(phba
);
2464 if (lpfc_sli_hba_setup(phba
)) { /* Initialize SLI2/SLI3 HBA */
2465 lpfc_unblock_mgmt_io(phba
);
2470 vports
= lpfc_create_vport_work_array(phba
);
2472 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
2473 struct Scsi_Host
*shost
;
2474 shost
= lpfc_shost_from_vport(vports
[i
]);
2475 spin_lock_irq(shost
->host_lock
);
2476 vports
[i
]->fc_flag
&= ~FC_OFFLINE_MODE
;
2477 if (phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
)
2478 vports
[i
]->fc_flag
|= FC_VPORT_NEEDS_REG_VPI
;
2479 if (phba
->sli_rev
== LPFC_SLI_REV4
)
2480 vports
[i
]->fc_flag
|= FC_VPORT_NEEDS_INIT_VPI
;
2481 spin_unlock_irq(shost
->host_lock
);
2483 lpfc_destroy_vport_work_array(phba
, vports
);
2485 lpfc_unblock_mgmt_io(phba
);
2490 * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
2491 * @phba: pointer to lpfc hba data structure.
2493 * This routine marks a HBA's management interface as not blocked. Once the
2494 * HBA's management interface is marked as not blocked, all the user space
2495 * access to the HBA, whether they are from sysfs interface or libdfc
2496 * interface will be allowed. The HBA is set to block the management interface
2497 * when the driver prepares the HBA interface for online or offline and then
2498 * set to unblock the management interface afterwards.
2501 lpfc_unblock_mgmt_io(struct lpfc_hba
* phba
)
2503 unsigned long iflag
;
2505 spin_lock_irqsave(&phba
->hbalock
, iflag
);
2506 phba
->sli
.sli_flag
&= ~LPFC_BLOCK_MGMT_IO
;
2507 spin_unlock_irqrestore(&phba
->hbalock
, iflag
);
2511 * lpfc_offline_prep - Prepare a HBA to be brought offline
2512 * @phba: pointer to lpfc hba data structure.
2514 * This routine is invoked to prepare a HBA to be brought offline. It performs
2515 * unregistration login to all the nodes on all vports and flushes the mailbox
2516 * queue to make it ready to be brought offline.
2519 lpfc_offline_prep(struct lpfc_hba
* phba
)
2521 struct lpfc_vport
*vport
= phba
->pport
;
2522 struct lpfc_nodelist
*ndlp
, *next_ndlp
;
2523 struct lpfc_vport
**vports
;
2524 struct Scsi_Host
*shost
;
2527 if (vport
->fc_flag
& FC_OFFLINE_MODE
)
2530 lpfc_block_mgmt_io(phba
);
2532 lpfc_linkdown(phba
);
2534 /* Issue an unreg_login to all nodes on all vports */
2535 vports
= lpfc_create_vport_work_array(phba
);
2536 if (vports
!= NULL
) {
2537 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
2538 if (vports
[i
]->load_flag
& FC_UNLOADING
)
2540 shost
= lpfc_shost_from_vport(vports
[i
]);
2541 spin_lock_irq(shost
->host_lock
);
2542 vports
[i
]->vpi_state
&= ~LPFC_VPI_REGISTERED
;
2543 vports
[i
]->fc_flag
|= FC_VPORT_NEEDS_REG_VPI
;
2544 vports
[i
]->fc_flag
&= ~FC_VFI_REGISTERED
;
2545 spin_unlock_irq(shost
->host_lock
);
2547 shost
= lpfc_shost_from_vport(vports
[i
]);
2548 list_for_each_entry_safe(ndlp
, next_ndlp
,
2549 &vports
[i
]->fc_nodes
,
2551 if (!NLP_CHK_NODE_ACT(ndlp
))
2553 if (ndlp
->nlp_state
== NLP_STE_UNUSED_NODE
)
2555 if (ndlp
->nlp_type
& NLP_FABRIC
) {
2556 lpfc_disc_state_machine(vports
[i
], ndlp
,
2557 NULL
, NLP_EVT_DEVICE_RECOVERY
);
2558 lpfc_disc_state_machine(vports
[i
], ndlp
,
2559 NULL
, NLP_EVT_DEVICE_RM
);
2561 spin_lock_irq(shost
->host_lock
);
2562 ndlp
->nlp_flag
&= ~NLP_NPR_ADISC
;
2563 spin_unlock_irq(shost
->host_lock
);
2564 lpfc_unreg_rpi(vports
[i
], ndlp
);
2568 lpfc_destroy_vport_work_array(phba
, vports
);
2570 lpfc_sli_mbox_sys_shutdown(phba
);
2574 * lpfc_offline - Bring a HBA offline
2575 * @phba: pointer to lpfc hba data structure.
2577 * This routine actually brings a HBA offline. It stops all the timers
2578 * associated with the HBA, brings down the SLI layer, and eventually
2579 * marks the HBA as in offline state for the upper layer protocol.
2582 lpfc_offline(struct lpfc_hba
*phba
)
2584 struct Scsi_Host
*shost
;
2585 struct lpfc_vport
**vports
;
2588 if (phba
->pport
->fc_flag
& FC_OFFLINE_MODE
)
2591 /* stop port and all timers associated with this hba */
2592 lpfc_stop_port(phba
);
2593 vports
= lpfc_create_vport_work_array(phba
);
2595 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++)
2596 lpfc_stop_vport_timers(vports
[i
]);
2597 lpfc_destroy_vport_work_array(phba
, vports
);
2598 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
2599 "0460 Bring Adapter offline\n");
2600 /* Bring down the SLI Layer and cleanup. The HBA is offline
2602 lpfc_sli_hba_down(phba
);
2603 spin_lock_irq(&phba
->hbalock
);
2605 spin_unlock_irq(&phba
->hbalock
);
2606 vports
= lpfc_create_vport_work_array(phba
);
2608 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
2609 shost
= lpfc_shost_from_vport(vports
[i
]);
2610 spin_lock_irq(shost
->host_lock
);
2611 vports
[i
]->work_port_events
= 0;
2612 vports
[i
]->fc_flag
|= FC_OFFLINE_MODE
;
2613 spin_unlock_irq(shost
->host_lock
);
2615 lpfc_destroy_vport_work_array(phba
, vports
);
2619 * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
2620 * @phba: pointer to lpfc hba data structure.
2622 * This routine is to free all the SCSI buffers and IOCBs from the driver
2623 * list back to kernel. It is called from lpfc_pci_remove_one to free
2624 * the internal resources before the device is removed from the system.
2627 * 0 - successful (for now, it always returns 0)
2630 lpfc_scsi_free(struct lpfc_hba
*phba
)
2632 struct lpfc_scsi_buf
*sb
, *sb_next
;
2633 struct lpfc_iocbq
*io
, *io_next
;
2635 spin_lock_irq(&phba
->hbalock
);
2636 /* Release all the lpfc_scsi_bufs maintained by this host. */
2637 spin_lock(&phba
->scsi_buf_list_lock
);
2638 list_for_each_entry_safe(sb
, sb_next
, &phba
->lpfc_scsi_buf_list
, list
) {
2639 list_del(&sb
->list
);
2640 pci_pool_free(phba
->lpfc_scsi_dma_buf_pool
, sb
->data
,
2643 phba
->total_scsi_bufs
--;
2645 spin_unlock(&phba
->scsi_buf_list_lock
);
2647 /* Release all the lpfc_iocbq entries maintained by this host. */
2648 list_for_each_entry_safe(io
, io_next
, &phba
->lpfc_iocb_list
, list
) {
2649 list_del(&io
->list
);
2651 phba
->total_iocbq_bufs
--;
2653 spin_unlock_irq(&phba
->hbalock
);
2658 * lpfc_create_port - Create an FC port
2659 * @phba: pointer to lpfc hba data structure.
2660 * @instance: a unique integer ID to this FC port.
2661 * @dev: pointer to the device data structure.
2663 * This routine creates a FC port for the upper layer protocol. The FC port
2664 * can be created on top of either a physical port or a virtual port provided
2665 * by the HBA. This routine also allocates a SCSI host data structure (shost)
2666 * and associates the FC port created before adding the shost into the SCSI
2670 * @vport - pointer to the virtual N_Port data structure.
2671 * NULL - port create failed.
2674 lpfc_create_port(struct lpfc_hba
*phba
, int instance
, struct device
*dev
)
2676 struct lpfc_vport
*vport
;
2677 struct Scsi_Host
*shost
;
2680 if (dev
!= &phba
->pcidev
->dev
)
2681 shost
= scsi_host_alloc(&lpfc_vport_template
,
2682 sizeof(struct lpfc_vport
));
2684 shost
= scsi_host_alloc(&lpfc_template
,
2685 sizeof(struct lpfc_vport
));
2689 vport
= (struct lpfc_vport
*) shost
->hostdata
;
2691 vport
->load_flag
|= FC_LOADING
;
2692 vport
->fc_flag
|= FC_VPORT_NEEDS_REG_VPI
;
2693 vport
->fc_rscn_flush
= 0;
2695 lpfc_get_vport_cfgparam(vport
);
2696 shost
->unique_id
= instance
;
2697 shost
->max_id
= LPFC_MAX_TARGET
;
2698 shost
->max_lun
= vport
->cfg_max_luns
;
2699 shost
->this_id
= -1;
2700 shost
->max_cmd_len
= 16;
2701 if (phba
->sli_rev
== LPFC_SLI_REV4
) {
2702 shost
->dma_boundary
=
2703 phba
->sli4_hba
.pc_sli4_params
.sge_supp_len
-1;
2704 shost
->sg_tablesize
= phba
->cfg_sg_seg_cnt
;
2708 * Set initial can_queue value since 0 is no longer supported and
2709 * scsi_add_host will fail. This will be adjusted later based on the
2710 * max xri value determined in hba setup.
2712 shost
->can_queue
= phba
->cfg_hba_queue_depth
- 10;
2713 if (dev
!= &phba
->pcidev
->dev
) {
2714 shost
->transportt
= lpfc_vport_transport_template
;
2715 vport
->port_type
= LPFC_NPIV_PORT
;
2717 shost
->transportt
= lpfc_transport_template
;
2718 vport
->port_type
= LPFC_PHYSICAL_PORT
;
2721 /* Initialize all internally managed lists. */
2722 INIT_LIST_HEAD(&vport
->fc_nodes
);
2723 INIT_LIST_HEAD(&vport
->rcv_buffer_list
);
2724 spin_lock_init(&vport
->work_port_lock
);
2726 init_timer(&vport
->fc_disctmo
);
2727 vport
->fc_disctmo
.function
= lpfc_disc_timeout
;
2728 vport
->fc_disctmo
.data
= (unsigned long)vport
;
2730 init_timer(&vport
->fc_fdmitmo
);
2731 vport
->fc_fdmitmo
.function
= lpfc_fdmi_tmo
;
2732 vport
->fc_fdmitmo
.data
= (unsigned long)vport
;
2734 init_timer(&vport
->els_tmofunc
);
2735 vport
->els_tmofunc
.function
= lpfc_els_timeout
;
2736 vport
->els_tmofunc
.data
= (unsigned long)vport
;
2738 init_timer(&vport
->delayed_disc_tmo
);
2739 vport
->delayed_disc_tmo
.function
= lpfc_delayed_disc_tmo
;
2740 vport
->delayed_disc_tmo
.data
= (unsigned long)vport
;
2742 error
= scsi_add_host_with_dma(shost
, dev
, &phba
->pcidev
->dev
);
2746 spin_lock_irq(&phba
->hbalock
);
2747 list_add_tail(&vport
->listentry
, &phba
->port_list
);
2748 spin_unlock_irq(&phba
->hbalock
);
2752 scsi_host_put(shost
);
2758 * destroy_port - destroy an FC port
2759 * @vport: pointer to an lpfc virtual N_Port data structure.
2761 * This routine destroys a FC port from the upper layer protocol. All the
2762 * resources associated with the port are released.
2765 destroy_port(struct lpfc_vport
*vport
)
2767 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
2768 struct lpfc_hba
*phba
= vport
->phba
;
2770 lpfc_debugfs_terminate(vport
);
2771 fc_remove_host(shost
);
2772 scsi_remove_host(shost
);
2774 spin_lock_irq(&phba
->hbalock
);
2775 list_del_init(&vport
->listentry
);
2776 spin_unlock_irq(&phba
->hbalock
);
2778 lpfc_cleanup(vport
);
2783 * lpfc_get_instance - Get a unique integer ID
2785 * This routine allocates a unique integer ID from lpfc_hba_index pool. It
2786 * uses the kernel idr facility to perform the task.
2789 * instance - a unique integer ID allocated as the new instance.
2790 * -1 - lpfc get instance failed.
2793 lpfc_get_instance(void)
2797 /* Assign an unused number */
2798 if (!idr_pre_get(&lpfc_hba_index
, GFP_KERNEL
))
2800 if (idr_get_new(&lpfc_hba_index
, NULL
, &instance
))
2806 * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
2807 * @shost: pointer to SCSI host data structure.
2808 * @time: elapsed time of the scan in jiffies.
2810 * This routine is called by the SCSI layer with a SCSI host to determine
2811 * whether the scan host is finished.
2813 * Note: there is no scan_start function as adapter initialization will have
2814 * asynchronously kicked off the link initialization.
2817 * 0 - SCSI host scan is not over yet.
2818 * 1 - SCSI host scan is over.
2820 int lpfc_scan_finished(struct Scsi_Host
*shost
, unsigned long time
)
2822 struct lpfc_vport
*vport
= (struct lpfc_vport
*) shost
->hostdata
;
2823 struct lpfc_hba
*phba
= vport
->phba
;
2826 spin_lock_irq(shost
->host_lock
);
2828 if (vport
->load_flag
& FC_UNLOADING
) {
2832 if (time
>= 30 * HZ
) {
2833 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
2834 "0461 Scanning longer than 30 "
2835 "seconds. Continuing initialization\n");
2839 if (time
>= 15 * HZ
&& phba
->link_state
<= LPFC_LINK_DOWN
) {
2840 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
2841 "0465 Link down longer than 15 "
2842 "seconds. Continuing initialization\n");
2847 if (vport
->port_state
!= LPFC_VPORT_READY
)
2849 if (vport
->num_disc_nodes
|| vport
->fc_prli_sent
)
2851 if (vport
->fc_map_cnt
== 0 && time
< 2 * HZ
)
2853 if ((phba
->sli
.sli_flag
& LPFC_SLI_MBOX_ACTIVE
) != 0)
2859 spin_unlock_irq(shost
->host_lock
);
2864 * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
2865 * @shost: pointer to SCSI host data structure.
2867 * This routine initializes a given SCSI host attributes on a FC port. The
2868 * SCSI host can be either on top of a physical port or a virtual port.
2870 void lpfc_host_attrib_init(struct Scsi_Host
*shost
)
2872 struct lpfc_vport
*vport
= (struct lpfc_vport
*) shost
->hostdata
;
2873 struct lpfc_hba
*phba
= vport
->phba
;
2875 * Set fixed host attributes. Must done after lpfc_sli_hba_setup().
2878 fc_host_node_name(shost
) = wwn_to_u64(vport
->fc_nodename
.u
.wwn
);
2879 fc_host_port_name(shost
) = wwn_to_u64(vport
->fc_portname
.u
.wwn
);
2880 fc_host_supported_classes(shost
) = FC_COS_CLASS3
;
2882 memset(fc_host_supported_fc4s(shost
), 0,
2883 sizeof(fc_host_supported_fc4s(shost
)));
2884 fc_host_supported_fc4s(shost
)[2] = 1;
2885 fc_host_supported_fc4s(shost
)[7] = 1;
2887 lpfc_vport_symbolic_node_name(vport
, fc_host_symbolic_name(shost
),
2888 sizeof fc_host_symbolic_name(shost
));
2890 fc_host_supported_speeds(shost
) = 0;
2891 if (phba
->lmt
& LMT_10Gb
)
2892 fc_host_supported_speeds(shost
) |= FC_PORTSPEED_10GBIT
;
2893 if (phba
->lmt
& LMT_8Gb
)
2894 fc_host_supported_speeds(shost
) |= FC_PORTSPEED_8GBIT
;
2895 if (phba
->lmt
& LMT_4Gb
)
2896 fc_host_supported_speeds(shost
) |= FC_PORTSPEED_4GBIT
;
2897 if (phba
->lmt
& LMT_2Gb
)
2898 fc_host_supported_speeds(shost
) |= FC_PORTSPEED_2GBIT
;
2899 if (phba
->lmt
& LMT_1Gb
)
2900 fc_host_supported_speeds(shost
) |= FC_PORTSPEED_1GBIT
;
2902 fc_host_maxframe_size(shost
) =
2903 (((uint32_t) vport
->fc_sparam
.cmn
.bbRcvSizeMsb
& 0x0F) << 8) |
2904 (uint32_t) vport
->fc_sparam
.cmn
.bbRcvSizeLsb
;
2906 fc_host_dev_loss_tmo(shost
) = vport
->cfg_devloss_tmo
;
2908 /* This value is also unchanging */
2909 memset(fc_host_active_fc4s(shost
), 0,
2910 sizeof(fc_host_active_fc4s(shost
)));
2911 fc_host_active_fc4s(shost
)[2] = 1;
2912 fc_host_active_fc4s(shost
)[7] = 1;
2914 fc_host_max_npiv_vports(shost
) = phba
->max_vpi
;
2915 spin_lock_irq(shost
->host_lock
);
2916 vport
->load_flag
&= ~FC_LOADING
;
2917 spin_unlock_irq(shost
->host_lock
);
2921 * lpfc_stop_port_s3 - Stop SLI3 device port
2922 * @phba: pointer to lpfc hba data structure.
2924 * This routine is invoked to stop an SLI3 device port, it stops the device
2925 * from generating interrupts and stops the device driver's timers for the
2929 lpfc_stop_port_s3(struct lpfc_hba
*phba
)
2931 /* Clear all interrupt enable conditions */
2932 writel(0, phba
->HCregaddr
);
2933 readl(phba
->HCregaddr
); /* flush */
2934 /* Clear all pending interrupts */
2935 writel(0xffffffff, phba
->HAregaddr
);
2936 readl(phba
->HAregaddr
); /* flush */
2938 /* Reset some HBA SLI setup states */
2939 lpfc_stop_hba_timers(phba
);
2940 phba
->pport
->work_port_events
= 0;
2944 * lpfc_stop_port_s4 - Stop SLI4 device port
2945 * @phba: pointer to lpfc hba data structure.
2947 * This routine is invoked to stop an SLI4 device port, it stops the device
2948 * from generating interrupts and stops the device driver's timers for the
2952 lpfc_stop_port_s4(struct lpfc_hba
*phba
)
2954 /* Reset some HBA SLI4 setup states */
2955 lpfc_stop_hba_timers(phba
);
2956 phba
->pport
->work_port_events
= 0;
2957 phba
->sli4_hba
.intr_enable
= 0;
2961 * lpfc_stop_port - Wrapper function for stopping hba port
2962 * @phba: Pointer to HBA context object.
2964 * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
2965 * the API jump table function pointer from the lpfc_hba struct.
2968 lpfc_stop_port(struct lpfc_hba
*phba
)
2970 phba
->lpfc_stop_port(phba
);
2974 * lpfc_fcf_redisc_wait_start_timer - Start fcf rediscover wait timer
2975 * @phba: Pointer to hba for which this call is being executed.
2977 * This routine starts the timer waiting for the FCF rediscovery to complete.
2980 lpfc_fcf_redisc_wait_start_timer(struct lpfc_hba
*phba
)
2982 unsigned long fcf_redisc_wait_tmo
=
2983 (jiffies
+ msecs_to_jiffies(LPFC_FCF_REDISCOVER_WAIT_TMO
));
2984 /* Start fcf rediscovery wait period timer */
2985 mod_timer(&phba
->fcf
.redisc_wait
, fcf_redisc_wait_tmo
);
2986 spin_lock_irq(&phba
->hbalock
);
2987 /* Allow action to new fcf asynchronous event */
2988 phba
->fcf
.fcf_flag
&= ~(FCF_AVAILABLE
| FCF_SCAN_DONE
);
2989 /* Mark the FCF rediscovery pending state */
2990 phba
->fcf
.fcf_flag
|= FCF_REDISC_PEND
;
2991 spin_unlock_irq(&phba
->hbalock
);
2995 * lpfc_sli4_fcf_redisc_wait_tmo - FCF table rediscover wait timeout
2996 * @ptr: Map to lpfc_hba data structure pointer.
2998 * This routine is invoked when waiting for FCF table rediscover has been
2999 * timed out. If new FCF record(s) has (have) been discovered during the
3000 * wait period, a new FCF event shall be added to the FCOE async event
3001 * list, and then worker thread shall be waked up for processing from the
3002 * worker thread context.
3005 lpfc_sli4_fcf_redisc_wait_tmo(unsigned long ptr
)
3007 struct lpfc_hba
*phba
= (struct lpfc_hba
*)ptr
;
3009 /* Don't send FCF rediscovery event if timer cancelled */
3010 spin_lock_irq(&phba
->hbalock
);
3011 if (!(phba
->fcf
.fcf_flag
& FCF_REDISC_PEND
)) {
3012 spin_unlock_irq(&phba
->hbalock
);
3015 /* Clear FCF rediscovery timer pending flag */
3016 phba
->fcf
.fcf_flag
&= ~FCF_REDISC_PEND
;
3017 /* FCF rediscovery event to worker thread */
3018 phba
->fcf
.fcf_flag
|= FCF_REDISC_EVT
;
3019 spin_unlock_irq(&phba
->hbalock
);
3020 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
3021 "2776 FCF rediscover quiescent timer expired\n");
3022 /* wake up worker thread */
3023 lpfc_worker_wake_up(phba
);
3027 * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
3028 * @phba: pointer to lpfc hba data structure.
3029 * @acqe_link: pointer to the async link completion queue entry.
3031 * This routine is to parse the SLI4 link-attention link fault code and
3032 * translate it into the base driver's read link attention mailbox command
3035 * Return: Link-attention status in terms of base driver's coding.
3038 lpfc_sli4_parse_latt_fault(struct lpfc_hba
*phba
,
3039 struct lpfc_acqe_link
*acqe_link
)
3041 uint16_t latt_fault
;
3043 switch (bf_get(lpfc_acqe_link_fault
, acqe_link
)) {
3044 case LPFC_ASYNC_LINK_FAULT_NONE
:
3045 case LPFC_ASYNC_LINK_FAULT_LOCAL
:
3046 case LPFC_ASYNC_LINK_FAULT_REMOTE
:
3050 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3051 "0398 Invalid link fault code: x%x\n",
3052 bf_get(lpfc_acqe_link_fault
, acqe_link
));
3053 latt_fault
= MBXERR_ERROR
;
3060 * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
3061 * @phba: pointer to lpfc hba data structure.
3062 * @acqe_link: pointer to the async link completion queue entry.
3064 * This routine is to parse the SLI4 link attention type and translate it
3065 * into the base driver's link attention type coding.
3067 * Return: Link attention type in terms of base driver's coding.
3070 lpfc_sli4_parse_latt_type(struct lpfc_hba
*phba
,
3071 struct lpfc_acqe_link
*acqe_link
)
3075 switch (bf_get(lpfc_acqe_link_status
, acqe_link
)) {
3076 case LPFC_ASYNC_LINK_STATUS_DOWN
:
3077 case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN
:
3078 att_type
= LPFC_ATT_LINK_DOWN
;
3080 case LPFC_ASYNC_LINK_STATUS_UP
:
3081 /* Ignore physical link up events - wait for logical link up */
3082 att_type
= LPFC_ATT_RESERVED
;
3084 case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP
:
3085 att_type
= LPFC_ATT_LINK_UP
;
3088 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3089 "0399 Invalid link attention type: x%x\n",
3090 bf_get(lpfc_acqe_link_status
, acqe_link
));
3091 att_type
= LPFC_ATT_RESERVED
;
3098 * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
3099 * @phba: pointer to lpfc hba data structure.
3100 * @acqe_link: pointer to the async link completion queue entry.
3102 * This routine is to parse the SLI4 link-attention link speed and translate
3103 * it into the base driver's link-attention link speed coding.
3105 * Return: Link-attention link speed in terms of base driver's coding.
3108 lpfc_sli4_parse_latt_link_speed(struct lpfc_hba
*phba
,
3109 struct lpfc_acqe_link
*acqe_link
)
3113 switch (bf_get(lpfc_acqe_link_speed
, acqe_link
)) {
3114 case LPFC_ASYNC_LINK_SPEED_ZERO
:
3115 case LPFC_ASYNC_LINK_SPEED_10MBPS
:
3116 case LPFC_ASYNC_LINK_SPEED_100MBPS
:
3117 link_speed
= LPFC_LINK_SPEED_UNKNOWN
;
3119 case LPFC_ASYNC_LINK_SPEED_1GBPS
:
3120 link_speed
= LPFC_LINK_SPEED_1GHZ
;
3122 case LPFC_ASYNC_LINK_SPEED_10GBPS
:
3123 link_speed
= LPFC_LINK_SPEED_10GHZ
;
3126 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3127 "0483 Invalid link-attention link speed: x%x\n",
3128 bf_get(lpfc_acqe_link_speed
, acqe_link
));
3129 link_speed
= LPFC_LINK_SPEED_UNKNOWN
;
3136 * lpfc_sli4_async_link_evt - Process the asynchronous FCoE link event
3137 * @phba: pointer to lpfc hba data structure.
3138 * @acqe_link: pointer to the async link completion queue entry.
3140 * This routine is to handle the SLI4 asynchronous FCoE link event.
3143 lpfc_sli4_async_link_evt(struct lpfc_hba
*phba
,
3144 struct lpfc_acqe_link
*acqe_link
)
3146 struct lpfc_dmabuf
*mp
;
3149 struct lpfc_mbx_read_top
*la
;
3153 att_type
= lpfc_sli4_parse_latt_type(phba
, acqe_link
);
3154 if (att_type
!= LPFC_ATT_LINK_DOWN
&& att_type
!= LPFC_ATT_LINK_UP
)
3156 phba
->fcoe_eventtag
= acqe_link
->event_tag
;
3157 pmb
= (LPFC_MBOXQ_t
*)mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3159 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3160 "0395 The mboxq allocation failed\n");
3163 mp
= kmalloc(sizeof(struct lpfc_dmabuf
), GFP_KERNEL
);
3165 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3166 "0396 The lpfc_dmabuf allocation failed\n");
3169 mp
->virt
= lpfc_mbuf_alloc(phba
, 0, &mp
->phys
);
3171 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3172 "0397 The mbuf allocation failed\n");
3173 goto out_free_dmabuf
;
3176 /* Cleanup any outstanding ELS commands */
3177 lpfc_els_flush_all_cmd(phba
);
3179 /* Block ELS IOCBs until we have done process link event */
3180 phba
->sli
.ring
[LPFC_ELS_RING
].flag
|= LPFC_STOP_IOCB_EVENT
;
3182 /* Update link event statistics */
3183 phba
->sli
.slistat
.link_event
++;
3185 /* Create lpfc_handle_latt mailbox command from link ACQE */
3186 lpfc_read_topology(phba
, pmb
, mp
);
3187 pmb
->mbox_cmpl
= lpfc_mbx_cmpl_read_topology
;
3188 pmb
->vport
= phba
->pport
;
3190 /* Keep the link status for extra SLI4 state machine reference */
3191 phba
->sli4_hba
.link_state
.speed
=
3192 bf_get(lpfc_acqe_link_speed
, acqe_link
);
3193 phba
->sli4_hba
.link_state
.duplex
=
3194 bf_get(lpfc_acqe_link_duplex
, acqe_link
);
3195 phba
->sli4_hba
.link_state
.status
=
3196 bf_get(lpfc_acqe_link_status
, acqe_link
);
3197 phba
->sli4_hba
.link_state
.type
=
3198 bf_get(lpfc_acqe_link_type
, acqe_link
);
3199 phba
->sli4_hba
.link_state
.number
=
3200 bf_get(lpfc_acqe_link_number
, acqe_link
);
3201 phba
->sli4_hba
.link_state
.fault
=
3202 bf_get(lpfc_acqe_link_fault
, acqe_link
);
3203 phba
->sli4_hba
.link_state
.logical_speed
=
3204 bf_get(lpfc_acqe_logical_link_speed
, acqe_link
);
3205 lpfc_printf_log(phba
, KERN_INFO
, LOG_SLI
,
3206 "2900 Async FCoE Link event - Speed:%dGBit duplex:x%x "
3207 "LA Type:x%x Port Type:%d Port Number:%d Logical "
3208 "speed:%dMbps Fault:%d\n",
3209 phba
->sli4_hba
.link_state
.speed
,
3210 phba
->sli4_hba
.link_state
.topology
,
3211 phba
->sli4_hba
.link_state
.status
,
3212 phba
->sli4_hba
.link_state
.type
,
3213 phba
->sli4_hba
.link_state
.number
,
3214 phba
->sli4_hba
.link_state
.logical_speed
* 10,
3215 phba
->sli4_hba
.link_state
.fault
);
3217 * For FC Mode: issue the READ_TOPOLOGY mailbox command to fetch
3218 * topology info. Note: Optional for non FC-AL ports.
3220 if (!(phba
->hba_flag
& HBA_FCOE_MODE
)) {
3221 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_NOWAIT
);
3222 if (rc
== MBX_NOT_FINISHED
)
3223 goto out_free_dmabuf
;
3227 * For FCoE Mode: fill in all the topology information we need and call
3228 * the READ_TOPOLOGY completion routine to continue without actually
3229 * sending the READ_TOPOLOGY mailbox command to the port.
3231 /* Parse and translate status field */
3233 mb
->mbxStatus
= lpfc_sli4_parse_latt_fault(phba
, acqe_link
);
3235 /* Parse and translate link attention fields */
3236 la
= (struct lpfc_mbx_read_top
*) &pmb
->u
.mb
.un
.varReadTop
;
3237 la
->eventTag
= acqe_link
->event_tag
;
3238 bf_set(lpfc_mbx_read_top_att_type
, la
, att_type
);
3239 bf_set(lpfc_mbx_read_top_link_spd
, la
,
3240 lpfc_sli4_parse_latt_link_speed(phba
, acqe_link
));
3242 /* Fake the the following irrelvant fields */
3243 bf_set(lpfc_mbx_read_top_topology
, la
, LPFC_TOPOLOGY_PT_PT
);
3244 bf_set(lpfc_mbx_read_top_alpa_granted
, la
, 0);
3245 bf_set(lpfc_mbx_read_top_il
, la
, 0);
3246 bf_set(lpfc_mbx_read_top_pb
, la
, 0);
3247 bf_set(lpfc_mbx_read_top_fa
, la
, 0);
3248 bf_set(lpfc_mbx_read_top_mm
, la
, 0);
3250 /* Invoke the lpfc_handle_latt mailbox command callback function */
3251 lpfc_mbx_cmpl_read_topology(phba
, pmb
);
3258 mempool_free(pmb
, phba
->mbox_mem_pool
);
3262 * lpfc_sli4_async_fc_evt - Process the asynchronous FC link event
3263 * @phba: pointer to lpfc hba data structure.
3264 * @acqe_fc: pointer to the async fc completion queue entry.
3266 * This routine is to handle the SLI4 asynchronous FC event. It will simply log
3267 * that the event was received and then issue a read_topology mailbox command so
3268 * that the rest of the driver will treat it the same as SLI3.
3271 lpfc_sli4_async_fc_evt(struct lpfc_hba
*phba
, struct lpfc_acqe_fc_la
*acqe_fc
)
3273 struct lpfc_dmabuf
*mp
;
3277 if (bf_get(lpfc_trailer_type
, acqe_fc
) !=
3278 LPFC_FC_LA_EVENT_TYPE_FC_LINK
) {
3279 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3280 "2895 Non FC link Event detected.(%d)\n",
3281 bf_get(lpfc_trailer_type
, acqe_fc
));
3284 /* Keep the link status for extra SLI4 state machine reference */
3285 phba
->sli4_hba
.link_state
.speed
=
3286 bf_get(lpfc_acqe_fc_la_speed
, acqe_fc
);
3287 phba
->sli4_hba
.link_state
.duplex
= LPFC_ASYNC_LINK_DUPLEX_FULL
;
3288 phba
->sli4_hba
.link_state
.topology
=
3289 bf_get(lpfc_acqe_fc_la_topology
, acqe_fc
);
3290 phba
->sli4_hba
.link_state
.status
=
3291 bf_get(lpfc_acqe_fc_la_att_type
, acqe_fc
);
3292 phba
->sli4_hba
.link_state
.type
=
3293 bf_get(lpfc_acqe_fc_la_port_type
, acqe_fc
);
3294 phba
->sli4_hba
.link_state
.number
=
3295 bf_get(lpfc_acqe_fc_la_port_number
, acqe_fc
);
3296 phba
->sli4_hba
.link_state
.fault
=
3297 bf_get(lpfc_acqe_link_fault
, acqe_fc
);
3298 phba
->sli4_hba
.link_state
.logical_speed
=
3299 bf_get(lpfc_acqe_fc_la_llink_spd
, acqe_fc
);
3300 lpfc_printf_log(phba
, KERN_INFO
, LOG_SLI
,
3301 "2896 Async FC event - Speed:%dGBaud Topology:x%x "
3302 "LA Type:x%x Port Type:%d Port Number:%d Logical speed:"
3303 "%dMbps Fault:%d\n",
3304 phba
->sli4_hba
.link_state
.speed
,
3305 phba
->sli4_hba
.link_state
.topology
,
3306 phba
->sli4_hba
.link_state
.status
,
3307 phba
->sli4_hba
.link_state
.type
,
3308 phba
->sli4_hba
.link_state
.number
,
3309 phba
->sli4_hba
.link_state
.logical_speed
* 10,
3310 phba
->sli4_hba
.link_state
.fault
);
3311 pmb
= (LPFC_MBOXQ_t
*)mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3313 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3314 "2897 The mboxq allocation failed\n");
3317 mp
= kmalloc(sizeof(struct lpfc_dmabuf
), GFP_KERNEL
);
3319 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3320 "2898 The lpfc_dmabuf allocation failed\n");
3323 mp
->virt
= lpfc_mbuf_alloc(phba
, 0, &mp
->phys
);
3325 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3326 "2899 The mbuf allocation failed\n");
3327 goto out_free_dmabuf
;
3330 /* Cleanup any outstanding ELS commands */
3331 lpfc_els_flush_all_cmd(phba
);
3333 /* Block ELS IOCBs until we have done process link event */
3334 phba
->sli
.ring
[LPFC_ELS_RING
].flag
|= LPFC_STOP_IOCB_EVENT
;
3336 /* Update link event statistics */
3337 phba
->sli
.slistat
.link_event
++;
3339 /* Create lpfc_handle_latt mailbox command from link ACQE */
3340 lpfc_read_topology(phba
, pmb
, mp
);
3341 pmb
->mbox_cmpl
= lpfc_mbx_cmpl_read_topology
;
3342 pmb
->vport
= phba
->pport
;
3344 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_NOWAIT
);
3345 if (rc
== MBX_NOT_FINISHED
)
3346 goto out_free_dmabuf
;
3352 mempool_free(pmb
, phba
->mbox_mem_pool
);
3356 * lpfc_sli4_async_sli_evt - Process the asynchronous SLI link event
3357 * @phba: pointer to lpfc hba data structure.
3358 * @acqe_fc: pointer to the async SLI completion queue entry.
3360 * This routine is to handle the SLI4 asynchronous SLI events.
3363 lpfc_sli4_async_sli_evt(struct lpfc_hba
*phba
, struct lpfc_acqe_sli
*acqe_sli
)
3365 lpfc_printf_log(phba
, KERN_INFO
, LOG_SLI
,
3366 "2901 Async SLI event - Event Data1:x%08x Event Data2:"
3367 "x%08x SLI Event Type:%d",
3368 acqe_sli
->event_data1
, acqe_sli
->event_data2
,
3369 bf_get(lpfc_trailer_type
, acqe_sli
));
3374 * lpfc_sli4_perform_vport_cvl - Perform clear virtual link on a vport
3375 * @vport: pointer to vport data structure.
3377 * This routine is to perform Clear Virtual Link (CVL) on a vport in
3378 * response to a CVL event.
3380 * Return the pointer to the ndlp with the vport if successful, otherwise
3383 static struct lpfc_nodelist
*
3384 lpfc_sli4_perform_vport_cvl(struct lpfc_vport
*vport
)
3386 struct lpfc_nodelist
*ndlp
;
3387 struct Scsi_Host
*shost
;
3388 struct lpfc_hba
*phba
;
3395 ndlp
= lpfc_findnode_did(vport
, Fabric_DID
);
3397 /* Cannot find existing Fabric ndlp, so allocate a new one */
3398 ndlp
= mempool_alloc(phba
->nlp_mem_pool
, GFP_KERNEL
);
3401 lpfc_nlp_init(vport
, ndlp
, Fabric_DID
);
3402 /* Set the node type */
3403 ndlp
->nlp_type
|= NLP_FABRIC
;
3404 /* Put ndlp onto node list */
3405 lpfc_enqueue_node(vport
, ndlp
);
3406 } else if (!NLP_CHK_NODE_ACT(ndlp
)) {
3407 /* re-setup ndlp without removing from node list */
3408 ndlp
= lpfc_enable_node(vport
, ndlp
, NLP_STE_UNUSED_NODE
);
3412 if ((phba
->pport
->port_state
< LPFC_FLOGI
) &&
3413 (phba
->pport
->port_state
!= LPFC_VPORT_FAILED
))
3415 /* If virtual link is not yet instantiated ignore CVL */
3416 if ((vport
!= phba
->pport
) && (vport
->port_state
< LPFC_FDISC
)
3417 && (vport
->port_state
!= LPFC_VPORT_FAILED
))
3419 shost
= lpfc_shost_from_vport(vport
);
3422 lpfc_linkdown_port(vport
);
3423 lpfc_cleanup_pending_mbox(vport
);
3424 spin_lock_irq(shost
->host_lock
);
3425 vport
->fc_flag
|= FC_VPORT_CVL_RCVD
;
3426 spin_unlock_irq(shost
->host_lock
);
3432 * lpfc_sli4_perform_all_vport_cvl - Perform clear virtual link on all vports
3433 * @vport: pointer to lpfc hba data structure.
3435 * This routine is to perform Clear Virtual Link (CVL) on all vports in
3436 * response to a FCF dead event.
3439 lpfc_sli4_perform_all_vport_cvl(struct lpfc_hba
*phba
)
3441 struct lpfc_vport
**vports
;
3444 vports
= lpfc_create_vport_work_array(phba
);
3446 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++)
3447 lpfc_sli4_perform_vport_cvl(vports
[i
]);
3448 lpfc_destroy_vport_work_array(phba
, vports
);
3452 * lpfc_sli4_async_fip_evt - Process the asynchronous FCoE FIP event
3453 * @phba: pointer to lpfc hba data structure.
3454 * @acqe_link: pointer to the async fcoe completion queue entry.
3456 * This routine is to handle the SLI4 asynchronous fcoe event.
3459 lpfc_sli4_async_fip_evt(struct lpfc_hba
*phba
,
3460 struct lpfc_acqe_fip
*acqe_fip
)
3462 uint8_t event_type
= bf_get(lpfc_trailer_type
, acqe_fip
);
3464 struct lpfc_vport
*vport
;
3465 struct lpfc_nodelist
*ndlp
;
3466 struct Scsi_Host
*shost
;
3467 int active_vlink_present
;
3468 struct lpfc_vport
**vports
;
3471 phba
->fc_eventTag
= acqe_fip
->event_tag
;
3472 phba
->fcoe_eventtag
= acqe_fip
->event_tag
;
3473 switch (event_type
) {
3474 case LPFC_FIP_EVENT_TYPE_NEW_FCF
:
3475 case LPFC_FIP_EVENT_TYPE_FCF_PARAM_MOD
:
3476 if (event_type
== LPFC_FIP_EVENT_TYPE_NEW_FCF
)
3477 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
|
3479 "2546 New FCF event, evt_tag:x%x, "
3481 acqe_fip
->event_tag
,
3484 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
|
3486 "2788 FCF param modified event, "
3487 "evt_tag:x%x, index:x%x\n",
3488 acqe_fip
->event_tag
,
3490 if (phba
->fcf
.fcf_flag
& FCF_DISCOVERY
) {
3492 * During period of FCF discovery, read the FCF
3493 * table record indexed by the event to update
3494 * FCF roundrobin failover eligible FCF bmask.
3496 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
|
3498 "2779 Read FCF (x%x) for updating "
3499 "roundrobin FCF failover bmask\n",
3501 rc
= lpfc_sli4_read_fcf_rec(phba
, acqe_fip
->index
);
3504 /* If the FCF discovery is in progress, do nothing. */
3505 spin_lock_irq(&phba
->hbalock
);
3506 if (phba
->hba_flag
& FCF_TS_INPROG
) {
3507 spin_unlock_irq(&phba
->hbalock
);
3510 /* If fast FCF failover rescan event is pending, do nothing */
3511 if (phba
->fcf
.fcf_flag
& FCF_REDISC_EVT
) {
3512 spin_unlock_irq(&phba
->hbalock
);
3516 /* If the FCF has been in discovered state, do nothing. */
3517 if (phba
->fcf
.fcf_flag
& FCF_SCAN_DONE
) {
3518 spin_unlock_irq(&phba
->hbalock
);
3521 spin_unlock_irq(&phba
->hbalock
);
3523 /* Otherwise, scan the entire FCF table and re-discover SAN */
3524 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
3525 "2770 Start FCF table scan per async FCF "
3526 "event, evt_tag:x%x, index:x%x\n",
3527 acqe_fip
->event_tag
, acqe_fip
->index
);
3528 rc
= lpfc_sli4_fcf_scan_read_fcf_rec(phba
,
3529 LPFC_FCOE_FCF_GET_FIRST
);
3531 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
| LOG_DISCOVERY
,
3532 "2547 Issue FCF scan read FCF mailbox "
3533 "command failed (x%x)\n", rc
);
3536 case LPFC_FIP_EVENT_TYPE_FCF_TABLE_FULL
:
3537 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3538 "2548 FCF Table full count 0x%x tag 0x%x\n",
3539 bf_get(lpfc_acqe_fip_fcf_count
, acqe_fip
),
3540 acqe_fip
->event_tag
);
3543 case LPFC_FIP_EVENT_TYPE_FCF_DEAD
:
3544 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
| LOG_DISCOVERY
,
3545 "2549 FCF (x%x) disconnected from network, "
3546 "tag:x%x\n", acqe_fip
->index
, acqe_fip
->event_tag
);
3548 * If we are in the middle of FCF failover process, clear
3549 * the corresponding FCF bit in the roundrobin bitmap.
3551 spin_lock_irq(&phba
->hbalock
);
3552 if (phba
->fcf
.fcf_flag
& FCF_DISCOVERY
) {
3553 spin_unlock_irq(&phba
->hbalock
);
3554 /* Update FLOGI FCF failover eligible FCF bmask */
3555 lpfc_sli4_fcf_rr_index_clear(phba
, acqe_fip
->index
);
3558 spin_unlock_irq(&phba
->hbalock
);
3560 /* If the event is not for currently used fcf do nothing */
3561 if (phba
->fcf
.current_rec
.fcf_indx
!= acqe_fip
->index
)
3565 * Otherwise, request the port to rediscover the entire FCF
3566 * table for a fast recovery from case that the current FCF
3567 * is no longer valid as we are not in the middle of FCF
3568 * failover process already.
3570 spin_lock_irq(&phba
->hbalock
);
3571 /* Mark the fast failover process in progress */
3572 phba
->fcf
.fcf_flag
|= FCF_DEAD_DISC
;
3573 spin_unlock_irq(&phba
->hbalock
);
3575 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
3576 "2771 Start FCF fast failover process due to "
3577 "FCF DEAD event: evt_tag:x%x, fcf_index:x%x "
3578 "\n", acqe_fip
->event_tag
, acqe_fip
->index
);
3579 rc
= lpfc_sli4_redisc_fcf_table(phba
);
3581 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
|
3583 "2772 Issue FCF rediscover mabilbox "
3584 "command failed, fail through to FCF "
3586 spin_lock_irq(&phba
->hbalock
);
3587 phba
->fcf
.fcf_flag
&= ~FCF_DEAD_DISC
;
3588 spin_unlock_irq(&phba
->hbalock
);
3590 * Last resort will fail over by treating this
3591 * as a link down to FCF registration.
3593 lpfc_sli4_fcf_dead_failthrough(phba
);
3595 /* Reset FCF roundrobin bmask for new discovery */
3596 memset(phba
->fcf
.fcf_rr_bmask
, 0,
3597 sizeof(*phba
->fcf
.fcf_rr_bmask
));
3599 * Handling fast FCF failover to a DEAD FCF event is
3600 * considered equalivant to receiving CVL to all vports.
3602 lpfc_sli4_perform_all_vport_cvl(phba
);
3605 case LPFC_FIP_EVENT_TYPE_CVL
:
3606 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
| LOG_DISCOVERY
,
3607 "2718 Clear Virtual Link Received for VPI 0x%x"
3608 " tag 0x%x\n", acqe_fip
->index
, acqe_fip
->event_tag
);
3609 vport
= lpfc_find_vport_by_vpid(phba
,
3610 acqe_fip
->index
- phba
->vpi_base
);
3611 ndlp
= lpfc_sli4_perform_vport_cvl(vport
);
3614 active_vlink_present
= 0;
3616 vports
= lpfc_create_vport_work_array(phba
);
3618 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
;
3620 if ((!(vports
[i
]->fc_flag
&
3621 FC_VPORT_CVL_RCVD
)) &&
3622 (vports
[i
]->port_state
> LPFC_FDISC
)) {
3623 active_vlink_present
= 1;
3627 lpfc_destroy_vport_work_array(phba
, vports
);
3630 if (active_vlink_present
) {
3632 * If there are other active VLinks present,
3633 * re-instantiate the Vlink using FDISC.
3635 mod_timer(&ndlp
->nlp_delayfunc
, jiffies
+ HZ
);
3636 shost
= lpfc_shost_from_vport(vport
);
3637 spin_lock_irq(shost
->host_lock
);
3638 ndlp
->nlp_flag
|= NLP_DELAY_TMO
;
3639 spin_unlock_irq(shost
->host_lock
);
3640 ndlp
->nlp_last_elscmd
= ELS_CMD_FDISC
;
3641 vport
->port_state
= LPFC_FDISC
;
3644 * Otherwise, we request port to rediscover
3645 * the entire FCF table for a fast recovery
3646 * from possible case that the current FCF
3647 * is no longer valid if we are not already
3648 * in the FCF failover process.
3650 spin_lock_irq(&phba
->hbalock
);
3651 if (phba
->fcf
.fcf_flag
& FCF_DISCOVERY
) {
3652 spin_unlock_irq(&phba
->hbalock
);
3655 /* Mark the fast failover process in progress */
3656 phba
->fcf
.fcf_flag
|= FCF_ACVL_DISC
;
3657 spin_unlock_irq(&phba
->hbalock
);
3658 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
|
3660 "2773 Start FCF failover per CVL, "
3661 "evt_tag:x%x\n", acqe_fip
->event_tag
);
3662 rc
= lpfc_sli4_redisc_fcf_table(phba
);
3664 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
|
3666 "2774 Issue FCF rediscover "
3667 "mabilbox command failed, "
3668 "through to CVL event\n");
3669 spin_lock_irq(&phba
->hbalock
);
3670 phba
->fcf
.fcf_flag
&= ~FCF_ACVL_DISC
;
3671 spin_unlock_irq(&phba
->hbalock
);
3673 * Last resort will be re-try on the
3674 * the current registered FCF entry.
3676 lpfc_retry_pport_discovery(phba
);
3679 * Reset FCF roundrobin bmask for new
3682 memset(phba
->fcf
.fcf_rr_bmask
, 0,
3683 sizeof(*phba
->fcf
.fcf_rr_bmask
));
3687 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3688 "0288 Unknown FCoE event type 0x%x event tag "
3689 "0x%x\n", event_type
, acqe_fip
->event_tag
);
3695 * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
3696 * @phba: pointer to lpfc hba data structure.
3697 * @acqe_link: pointer to the async dcbx completion queue entry.
3699 * This routine is to handle the SLI4 asynchronous dcbx event.
3702 lpfc_sli4_async_dcbx_evt(struct lpfc_hba
*phba
,
3703 struct lpfc_acqe_dcbx
*acqe_dcbx
)
3705 phba
->fc_eventTag
= acqe_dcbx
->event_tag
;
3706 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3707 "0290 The SLI4 DCBX asynchronous event is not "
3712 * lpfc_sli4_async_grp5_evt - Process the asynchronous group5 event
3713 * @phba: pointer to lpfc hba data structure.
3714 * @acqe_link: pointer to the async grp5 completion queue entry.
3716 * This routine is to handle the SLI4 asynchronous grp5 event. A grp5 event
3717 * is an asynchronous notified of a logical link speed change. The Port
3718 * reports the logical link speed in units of 10Mbps.
3721 lpfc_sli4_async_grp5_evt(struct lpfc_hba
*phba
,
3722 struct lpfc_acqe_grp5
*acqe_grp5
)
3724 uint16_t prev_ll_spd
;
3726 phba
->fc_eventTag
= acqe_grp5
->event_tag
;
3727 phba
->fcoe_eventtag
= acqe_grp5
->event_tag
;
3728 prev_ll_spd
= phba
->sli4_hba
.link_state
.logical_speed
;
3729 phba
->sli4_hba
.link_state
.logical_speed
=
3730 (bf_get(lpfc_acqe_grp5_llink_spd
, acqe_grp5
));
3731 lpfc_printf_log(phba
, KERN_INFO
, LOG_SLI
,
3732 "2789 GRP5 Async Event: Updating logical link speed "
3733 "from %dMbps to %dMbps\n", (prev_ll_spd
* 10),
3734 (phba
->sli4_hba
.link_state
.logical_speed
*10));
3738 * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
3739 * @phba: pointer to lpfc hba data structure.
3741 * This routine is invoked by the worker thread to process all the pending
3742 * SLI4 asynchronous events.
3744 void lpfc_sli4_async_event_proc(struct lpfc_hba
*phba
)
3746 struct lpfc_cq_event
*cq_event
;
3748 /* First, declare the async event has been handled */
3749 spin_lock_irq(&phba
->hbalock
);
3750 phba
->hba_flag
&= ~ASYNC_EVENT
;
3751 spin_unlock_irq(&phba
->hbalock
);
3752 /* Now, handle all the async events */
3753 while (!list_empty(&phba
->sli4_hba
.sp_asynce_work_queue
)) {
3754 /* Get the first event from the head of the event queue */
3755 spin_lock_irq(&phba
->hbalock
);
3756 list_remove_head(&phba
->sli4_hba
.sp_asynce_work_queue
,
3757 cq_event
, struct lpfc_cq_event
, list
);
3758 spin_unlock_irq(&phba
->hbalock
);
3759 /* Process the asynchronous event */
3760 switch (bf_get(lpfc_trailer_code
, &cq_event
->cqe
.mcqe_cmpl
)) {
3761 case LPFC_TRAILER_CODE_LINK
:
3762 lpfc_sli4_async_link_evt(phba
,
3763 &cq_event
->cqe
.acqe_link
);
3765 case LPFC_TRAILER_CODE_FCOE
:
3766 lpfc_sli4_async_fip_evt(phba
, &cq_event
->cqe
.acqe_fip
);
3768 case LPFC_TRAILER_CODE_DCBX
:
3769 lpfc_sli4_async_dcbx_evt(phba
,
3770 &cq_event
->cqe
.acqe_dcbx
);
3772 case LPFC_TRAILER_CODE_GRP5
:
3773 lpfc_sli4_async_grp5_evt(phba
,
3774 &cq_event
->cqe
.acqe_grp5
);
3776 case LPFC_TRAILER_CODE_FC
:
3777 lpfc_sli4_async_fc_evt(phba
, &cq_event
->cqe
.acqe_fc
);
3779 case LPFC_TRAILER_CODE_SLI
:
3780 lpfc_sli4_async_sli_evt(phba
, &cq_event
->cqe
.acqe_sli
);
3783 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
3784 "1804 Invalid asynchrous event code: "
3785 "x%x\n", bf_get(lpfc_trailer_code
,
3786 &cq_event
->cqe
.mcqe_cmpl
));
3789 /* Free the completion event processed to the free pool */
3790 lpfc_sli4_cq_event_release(phba
, cq_event
);
3795 * lpfc_sli4_fcf_redisc_event_proc - Process fcf table rediscovery event
3796 * @phba: pointer to lpfc hba data structure.
3798 * This routine is invoked by the worker thread to process FCF table
3799 * rediscovery pending completion event.
3801 void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba
*phba
)
3805 spin_lock_irq(&phba
->hbalock
);
3806 /* Clear FCF rediscovery timeout event */
3807 phba
->fcf
.fcf_flag
&= ~FCF_REDISC_EVT
;
3808 /* Clear driver fast failover FCF record flag */
3809 phba
->fcf
.failover_rec
.flag
= 0;
3810 /* Set state for FCF fast failover */
3811 phba
->fcf
.fcf_flag
|= FCF_REDISC_FOV
;
3812 spin_unlock_irq(&phba
->hbalock
);
3814 /* Scan FCF table from the first entry to re-discover SAN */
3815 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
3816 "2777 Start post-quiescent FCF table scan\n");
3817 rc
= lpfc_sli4_fcf_scan_read_fcf_rec(phba
, LPFC_FCOE_FCF_GET_FIRST
);
3819 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
| LOG_DISCOVERY
,
3820 "2747 Issue FCF scan read FCF mailbox "
3821 "command failed 0x%x\n", rc
);
3825 * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
3826 * @phba: pointer to lpfc hba data structure.
3827 * @dev_grp: The HBA PCI-Device group number.
3829 * This routine is invoked to set up the per HBA PCI-Device group function
3830 * API jump table entries.
3832 * Return: 0 if success, otherwise -ENODEV
3835 lpfc_api_table_setup(struct lpfc_hba
*phba
, uint8_t dev_grp
)
3839 /* Set up lpfc PCI-device group */
3840 phba
->pci_dev_grp
= dev_grp
;
3842 /* The LPFC_PCI_DEV_OC uses SLI4 */
3843 if (dev_grp
== LPFC_PCI_DEV_OC
)
3844 phba
->sli_rev
= LPFC_SLI_REV4
;
3846 /* Set up device INIT API function jump table */
3847 rc
= lpfc_init_api_table_setup(phba
, dev_grp
);
3850 /* Set up SCSI API function jump table */
3851 rc
= lpfc_scsi_api_table_setup(phba
, dev_grp
);
3854 /* Set up SLI API function jump table */
3855 rc
= lpfc_sli_api_table_setup(phba
, dev_grp
);
3858 /* Set up MBOX API function jump table */
3859 rc
= lpfc_mbox_api_table_setup(phba
, dev_grp
);
3867 * lpfc_log_intr_mode - Log the active interrupt mode
3868 * @phba: pointer to lpfc hba data structure.
3869 * @intr_mode: active interrupt mode adopted.
3871 * This routine it invoked to log the currently used active interrupt mode
3874 static void lpfc_log_intr_mode(struct lpfc_hba
*phba
, uint32_t intr_mode
)
3876 switch (intr_mode
) {
3878 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
3879 "0470 Enable INTx interrupt mode.\n");
3882 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
3883 "0481 Enabled MSI interrupt mode.\n");
3886 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
3887 "0480 Enabled MSI-X interrupt mode.\n");
3890 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3891 "0482 Illegal interrupt mode.\n");
3898 * lpfc_enable_pci_dev - Enable a generic PCI device.
3899 * @phba: pointer to lpfc hba data structure.
3901 * This routine is invoked to enable the PCI device that is common to all
3906 * other values - error
3909 lpfc_enable_pci_dev(struct lpfc_hba
*phba
)
3911 struct pci_dev
*pdev
;
3914 /* Obtain PCI device reference */
3918 pdev
= phba
->pcidev
;
3919 /* Select PCI BARs */
3920 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
3921 /* Enable PCI device */
3922 if (pci_enable_device_mem(pdev
))
3924 /* Request PCI resource for the device */
3925 if (pci_request_selected_regions(pdev
, bars
, LPFC_DRIVER_NAME
))
3926 goto out_disable_device
;
3927 /* Set up device as PCI master and save state for EEH */
3928 pci_set_master(pdev
);
3929 pci_try_set_mwi(pdev
);
3930 pci_save_state(pdev
);
3935 pci_disable_device(pdev
);
3941 * lpfc_disable_pci_dev - Disable a generic PCI device.
3942 * @phba: pointer to lpfc hba data structure.
3944 * This routine is invoked to disable the PCI device that is common to all
3948 lpfc_disable_pci_dev(struct lpfc_hba
*phba
)
3950 struct pci_dev
*pdev
;
3953 /* Obtain PCI device reference */
3957 pdev
= phba
->pcidev
;
3958 /* Select PCI BARs */
3959 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
3960 /* Release PCI resource and disable PCI device */
3961 pci_release_selected_regions(pdev
, bars
);
3962 pci_disable_device(pdev
);
3963 /* Null out PCI private reference to driver */
3964 pci_set_drvdata(pdev
, NULL
);
3970 * lpfc_reset_hba - Reset a hba
3971 * @phba: pointer to lpfc hba data structure.
3973 * This routine is invoked to reset a hba device. It brings the HBA
3974 * offline, performs a board restart, and then brings the board back
3975 * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
3976 * on outstanding mailbox commands.
3979 lpfc_reset_hba(struct lpfc_hba
*phba
)
3981 /* If resets are disabled then set error state and return. */
3982 if (!phba
->cfg_enable_hba_reset
) {
3983 phba
->link_state
= LPFC_HBA_ERROR
;
3986 lpfc_offline_prep(phba
);
3988 lpfc_sli_brdrestart(phba
);
3990 lpfc_unblock_mgmt_io(phba
);
3994 * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
3995 * @phba: pointer to lpfc hba data structure.
3997 * This routine is invoked to set up the driver internal resources specific to
3998 * support the SLI-3 HBA device it attached to.
4002 * other values - error
4005 lpfc_sli_driver_resource_setup(struct lpfc_hba
*phba
)
4007 struct lpfc_sli
*psli
;
4010 * Initialize timers used by driver
4013 /* Heartbeat timer */
4014 init_timer(&phba
->hb_tmofunc
);
4015 phba
->hb_tmofunc
.function
= lpfc_hb_timeout
;
4016 phba
->hb_tmofunc
.data
= (unsigned long)phba
;
4019 /* MBOX heartbeat timer */
4020 init_timer(&psli
->mbox_tmo
);
4021 psli
->mbox_tmo
.function
= lpfc_mbox_timeout
;
4022 psli
->mbox_tmo
.data
= (unsigned long) phba
;
4023 /* FCP polling mode timer */
4024 init_timer(&phba
->fcp_poll_timer
);
4025 phba
->fcp_poll_timer
.function
= lpfc_poll_timeout
;
4026 phba
->fcp_poll_timer
.data
= (unsigned long) phba
;
4027 /* Fabric block timer */
4028 init_timer(&phba
->fabric_block_timer
);
4029 phba
->fabric_block_timer
.function
= lpfc_fabric_block_timeout
;
4030 phba
->fabric_block_timer
.data
= (unsigned long) phba
;
4031 /* EA polling mode timer */
4032 init_timer(&phba
->eratt_poll
);
4033 phba
->eratt_poll
.function
= lpfc_poll_eratt
;
4034 phba
->eratt_poll
.data
= (unsigned long) phba
;
4036 /* Host attention work mask setup */
4037 phba
->work_ha_mask
= (HA_ERATT
| HA_MBATT
| HA_LATT
);
4038 phba
->work_ha_mask
|= (HA_RXMASK
<< (LPFC_ELS_RING
* 4));
4040 /* Get all the module params for configuring this host */
4041 lpfc_get_cfgparam(phba
);
4042 if (phba
->pcidev
->device
== PCI_DEVICE_ID_HORNET
) {
4043 phba
->menlo_flag
|= HBA_MENLO_SUPPORT
;
4044 /* check for menlo minimum sg count */
4045 if (phba
->cfg_sg_seg_cnt
< LPFC_DEFAULT_MENLO_SG_SEG_CNT
)
4046 phba
->cfg_sg_seg_cnt
= LPFC_DEFAULT_MENLO_SG_SEG_CNT
;
4050 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
4051 * used to create the sg_dma_buf_pool must be dynamically calculated.
4052 * 2 segments are added since the IOCB needs a command and response bde.
4054 phba
->cfg_sg_dma_buf_size
= sizeof(struct fcp_cmnd
) +
4055 sizeof(struct fcp_rsp
) +
4056 ((phba
->cfg_sg_seg_cnt
+ 2) * sizeof(struct ulp_bde64
));
4058 if (phba
->cfg_enable_bg
) {
4059 phba
->cfg_sg_seg_cnt
= LPFC_MAX_SG_SEG_CNT
;
4060 phba
->cfg_sg_dma_buf_size
+=
4061 phba
->cfg_prot_sg_seg_cnt
* sizeof(struct ulp_bde64
);
4064 /* Also reinitialize the host templates with new values. */
4065 lpfc_vport_template
.sg_tablesize
= phba
->cfg_sg_seg_cnt
;
4066 lpfc_template
.sg_tablesize
= phba
->cfg_sg_seg_cnt
;
4068 phba
->max_vpi
= LPFC_MAX_VPI
;
4069 /* This will be set to correct value after config_port mbox */
4070 phba
->max_vports
= 0;
4073 * Initialize the SLI Layer to run with lpfc HBAs.
4075 lpfc_sli_setup(phba
);
4076 lpfc_sli_queue_setup(phba
);
4078 /* Allocate device driver memory */
4079 if (lpfc_mem_alloc(phba
, BPL_ALIGN_SZ
))
4086 * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
4087 * @phba: pointer to lpfc hba data structure.
4089 * This routine is invoked to unset the driver internal resources set up
4090 * specific for supporting the SLI-3 HBA device it attached to.
4093 lpfc_sli_driver_resource_unset(struct lpfc_hba
*phba
)
4095 /* Free device driver memory allocated */
4096 lpfc_mem_free_all(phba
);
4102 * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
4103 * @phba: pointer to lpfc hba data structure.
4105 * This routine is invoked to set up the driver internal resources specific to
4106 * support the SLI-4 HBA device it attached to.
4110 * other values - error
4113 lpfc_sli4_driver_resource_setup(struct lpfc_hba
*phba
)
4115 struct lpfc_sli
*psli
;
4116 LPFC_MBOXQ_t
*mboxq
;
4117 int rc
, i
, hbq_count
, buf_size
, dma_buf_size
, max_buf_size
;
4118 uint8_t pn_page
[LPFC_MAX_SUPPORTED_PAGES
] = {0};
4119 struct lpfc_mqe
*mqe
;
4120 int longs
, sli_family
;
4122 /* Before proceed, wait for POST done and device ready */
4123 rc
= lpfc_sli4_post_status_check(phba
);
4128 * Initialize timers used by driver
4131 /* Heartbeat timer */
4132 init_timer(&phba
->hb_tmofunc
);
4133 phba
->hb_tmofunc
.function
= lpfc_hb_timeout
;
4134 phba
->hb_tmofunc
.data
= (unsigned long)phba
;
4135 init_timer(&phba
->rrq_tmr
);
4136 phba
->rrq_tmr
.function
= lpfc_rrq_timeout
;
4137 phba
->rrq_tmr
.data
= (unsigned long)phba
;
4140 /* MBOX heartbeat timer */
4141 init_timer(&psli
->mbox_tmo
);
4142 psli
->mbox_tmo
.function
= lpfc_mbox_timeout
;
4143 psli
->mbox_tmo
.data
= (unsigned long) phba
;
4144 /* Fabric block timer */
4145 init_timer(&phba
->fabric_block_timer
);
4146 phba
->fabric_block_timer
.function
= lpfc_fabric_block_timeout
;
4147 phba
->fabric_block_timer
.data
= (unsigned long) phba
;
4148 /* EA polling mode timer */
4149 init_timer(&phba
->eratt_poll
);
4150 phba
->eratt_poll
.function
= lpfc_poll_eratt
;
4151 phba
->eratt_poll
.data
= (unsigned long) phba
;
4152 /* FCF rediscover timer */
4153 init_timer(&phba
->fcf
.redisc_wait
);
4154 phba
->fcf
.redisc_wait
.function
= lpfc_sli4_fcf_redisc_wait_tmo
;
4155 phba
->fcf
.redisc_wait
.data
= (unsigned long)phba
;
4158 * We need to do a READ_CONFIG mailbox command here before
4159 * calling lpfc_get_cfgparam. For VFs this will report the
4160 * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
4161 * All of the resources allocated
4162 * for this Port are tied to these values.
4164 /* Get all the module params for configuring this host */
4165 lpfc_get_cfgparam(phba
);
4166 phba
->max_vpi
= LPFC_MAX_VPI
;
4167 /* This will be set to correct value after the read_config mbox */
4168 phba
->max_vports
= 0;
4170 /* Program the default value of vlan_id and fc_map */
4171 phba
->valid_vlan
= 0;
4172 phba
->fc_map
[0] = LPFC_FCOE_FCF_MAP0
;
4173 phba
->fc_map
[1] = LPFC_FCOE_FCF_MAP1
;
4174 phba
->fc_map
[2] = LPFC_FCOE_FCF_MAP2
;
4177 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
4178 * used to create the sg_dma_buf_pool must be dynamically calculated.
4179 * 2 segments are added since the IOCB needs a command and response bde.
4180 * To insure that the scsi sgl does not cross a 4k page boundary only
4181 * sgl sizes of must be a power of 2.
4183 buf_size
= (sizeof(struct fcp_cmnd
) + sizeof(struct fcp_rsp
) +
4184 ((phba
->cfg_sg_seg_cnt
+ 2) * sizeof(struct sli4_sge
)));
4186 sli_family
= bf_get(lpfc_sli_intf_sli_family
, &phba
->sli4_hba
.sli_intf
);
4187 max_buf_size
= LPFC_SLI4_MAX_BUF_SIZE
;
4188 switch (sli_family
) {
4189 case LPFC_SLI_INTF_FAMILY_BE2
:
4190 case LPFC_SLI_INTF_FAMILY_BE3
:
4191 /* There is a single hint for BE - 2 pages per BPL. */
4192 if (bf_get(lpfc_sli_intf_sli_hint1
, &phba
->sli4_hba
.sli_intf
) ==
4193 LPFC_SLI_INTF_SLI_HINT1_1
)
4194 max_buf_size
= LPFC_SLI4_FL1_MAX_BUF_SIZE
;
4196 case LPFC_SLI_INTF_FAMILY_LNCR_A0
:
4197 case LPFC_SLI_INTF_FAMILY_LNCR_B0
:
4201 for (dma_buf_size
= LPFC_SLI4_MIN_BUF_SIZE
;
4202 dma_buf_size
< max_buf_size
&& buf_size
> dma_buf_size
;
4203 dma_buf_size
= dma_buf_size
<< 1)
4205 if (dma_buf_size
== max_buf_size
)
4206 phba
->cfg_sg_seg_cnt
= (dma_buf_size
-
4207 sizeof(struct fcp_cmnd
) - sizeof(struct fcp_rsp
) -
4208 (2 * sizeof(struct sli4_sge
))) /
4209 sizeof(struct sli4_sge
);
4210 phba
->cfg_sg_dma_buf_size
= dma_buf_size
;
4212 /* Initialize buffer queue management fields */
4213 hbq_count
= lpfc_sli_hbq_count();
4214 for (i
= 0; i
< hbq_count
; ++i
)
4215 INIT_LIST_HEAD(&phba
->hbqs
[i
].hbq_buffer_list
);
4216 INIT_LIST_HEAD(&phba
->rb_pend_list
);
4217 phba
->hbqs
[LPFC_ELS_HBQ
].hbq_alloc_buffer
= lpfc_sli4_rb_alloc
;
4218 phba
->hbqs
[LPFC_ELS_HBQ
].hbq_free_buffer
= lpfc_sli4_rb_free
;
4221 * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
4223 /* Initialize the Abort scsi buffer list used by driver */
4224 spin_lock_init(&phba
->sli4_hba
.abts_scsi_buf_list_lock
);
4225 INIT_LIST_HEAD(&phba
->sli4_hba
.lpfc_abts_scsi_buf_list
);
4226 /* This abort list used by worker thread */
4227 spin_lock_init(&phba
->sli4_hba
.abts_sgl_list_lock
);
4230 * Initialize dirver internal slow-path work queues
4233 /* Driver internel slow-path CQ Event pool */
4234 INIT_LIST_HEAD(&phba
->sli4_hba
.sp_cqe_event_pool
);
4235 /* Response IOCB work queue list */
4236 INIT_LIST_HEAD(&phba
->sli4_hba
.sp_queue_event
);
4237 /* Asynchronous event CQ Event work queue list */
4238 INIT_LIST_HEAD(&phba
->sli4_hba
.sp_asynce_work_queue
);
4239 /* Fast-path XRI aborted CQ Event work queue list */
4240 INIT_LIST_HEAD(&phba
->sli4_hba
.sp_fcp_xri_aborted_work_queue
);
4241 /* Slow-path XRI aborted CQ Event work queue list */
4242 INIT_LIST_HEAD(&phba
->sli4_hba
.sp_els_xri_aborted_work_queue
);
4243 /* Receive queue CQ Event work queue list */
4244 INIT_LIST_HEAD(&phba
->sli4_hba
.sp_unsol_work_queue
);
4246 /* Initialize the driver internal SLI layer lists. */
4247 lpfc_sli_setup(phba
);
4248 lpfc_sli_queue_setup(phba
);
4250 /* Allocate device driver memory */
4251 rc
= lpfc_mem_alloc(phba
, SGL_ALIGN_SZ
);
4255 /* IF Type 2 ports get initialized now. */
4256 if (bf_get(lpfc_sli_intf_if_type
, &phba
->sli4_hba
.sli_intf
) ==
4257 LPFC_SLI_INTF_IF_TYPE_2
) {
4258 rc
= lpfc_pci_function_reset(phba
);
4263 /* Create the bootstrap mailbox command */
4264 rc
= lpfc_create_bootstrap_mbox(phba
);
4268 /* Set up the host's endian order with the device. */
4269 rc
= lpfc_setup_endian_order(phba
);
4271 goto out_free_bsmbx
;
4273 /* Set up the hba's configuration parameters. */
4274 rc
= lpfc_sli4_read_config(phba
);
4276 goto out_free_bsmbx
;
4278 /* IF Type 0 ports get initialized now. */
4279 if (bf_get(lpfc_sli_intf_if_type
, &phba
->sli4_hba
.sli_intf
) ==
4280 LPFC_SLI_INTF_IF_TYPE_0
) {
4281 rc
= lpfc_pci_function_reset(phba
);
4283 goto out_free_bsmbx
;
4286 mboxq
= (LPFC_MBOXQ_t
*) mempool_alloc(phba
->mbox_mem_pool
,
4290 goto out_free_bsmbx
;
4293 /* Get the Supported Pages if PORT_CAPABILITIES is supported by port. */
4294 lpfc_supported_pages(mboxq
);
4295 rc
= lpfc_sli_issue_mbox(phba
, mboxq
, MBX_POLL
);
4297 mqe
= &mboxq
->u
.mqe
;
4298 memcpy(&pn_page
[0], ((uint8_t *)&mqe
->un
.supp_pages
.word3
),
4299 LPFC_MAX_SUPPORTED_PAGES
);
4300 for (i
= 0; i
< LPFC_MAX_SUPPORTED_PAGES
; i
++) {
4301 switch (pn_page
[i
]) {
4302 case LPFC_SLI4_PARAMETERS
:
4303 phba
->sli4_hba
.pc_sli4_params
.supported
= 1;
4309 /* Read the port's SLI4 Parameters capabilities if supported. */
4310 if (phba
->sli4_hba
.pc_sli4_params
.supported
)
4311 rc
= lpfc_pc_sli4_params_get(phba
, mboxq
);
4313 mempool_free(mboxq
, phba
->mbox_mem_pool
);
4315 goto out_free_bsmbx
;
4319 * Get sli4 parameters that override parameters from Port capabilities.
4320 * If this call fails it is not a critical error so continue loading.
4322 lpfc_get_sli4_parameters(phba
, mboxq
);
4323 mempool_free(mboxq
, phba
->mbox_mem_pool
);
4324 /* Create all the SLI4 queues */
4325 rc
= lpfc_sli4_queue_create(phba
);
4327 goto out_free_bsmbx
;
4329 /* Create driver internal CQE event pool */
4330 rc
= lpfc_sli4_cq_event_pool_create(phba
);
4332 goto out_destroy_queue
;
4334 /* Initialize and populate the iocb list per host */
4335 rc
= lpfc_init_sgl_list(phba
);
4337 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
4338 "1400 Failed to initialize sgl list.\n");
4339 goto out_destroy_cq_event_pool
;
4341 rc
= lpfc_init_active_sgl_array(phba
);
4343 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
4344 "1430 Failed to initialize sgl list.\n");
4345 goto out_free_sgl_list
;
4348 rc
= lpfc_sli4_init_rpi_hdrs(phba
);
4350 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
4351 "1432 Failed to initialize rpi headers.\n");
4352 goto out_free_active_sgl
;
4355 /* Allocate eligible FCF bmask memory for FCF roundrobin failover */
4356 longs
= (LPFC_SLI4_FCF_TBL_INDX_MAX
+ BITS_PER_LONG
- 1)/BITS_PER_LONG
;
4357 phba
->fcf
.fcf_rr_bmask
= kzalloc(longs
* sizeof(unsigned long),
4359 if (!phba
->fcf
.fcf_rr_bmask
) {
4360 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
4361 "2759 Failed allocate memory for FCF round "
4362 "robin failover bmask\n");
4363 goto out_remove_rpi_hdrs
;
4366 phba
->sli4_hba
.fcp_eq_hdl
= kzalloc((sizeof(struct lpfc_fcp_eq_hdl
) *
4367 phba
->cfg_fcp_eq_count
), GFP_KERNEL
);
4368 if (!phba
->sli4_hba
.fcp_eq_hdl
) {
4369 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
4370 "2572 Failed allocate memory for fast-path "
4371 "per-EQ handle array\n");
4372 goto out_free_fcf_rr_bmask
;
4375 phba
->sli4_hba
.msix_entries
= kzalloc((sizeof(struct msix_entry
) *
4376 phba
->sli4_hba
.cfg_eqn
), GFP_KERNEL
);
4377 if (!phba
->sli4_hba
.msix_entries
) {
4378 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
4379 "2573 Failed allocate memory for msi-x "
4380 "interrupt vector entries\n");
4381 goto out_free_fcp_eq_hdl
;
4386 out_free_fcp_eq_hdl
:
4387 kfree(phba
->sli4_hba
.fcp_eq_hdl
);
4388 out_free_fcf_rr_bmask
:
4389 kfree(phba
->fcf
.fcf_rr_bmask
);
4390 out_remove_rpi_hdrs
:
4391 lpfc_sli4_remove_rpi_hdrs(phba
);
4392 out_free_active_sgl
:
4393 lpfc_free_active_sgl(phba
);
4395 lpfc_free_sgl_list(phba
);
4396 out_destroy_cq_event_pool
:
4397 lpfc_sli4_cq_event_pool_destroy(phba
);
4399 lpfc_sli4_queue_destroy(phba
);
4401 lpfc_destroy_bootstrap_mbox(phba
);
4403 lpfc_mem_free(phba
);
4408 * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
4409 * @phba: pointer to lpfc hba data structure.
4411 * This routine is invoked to unset the driver internal resources set up
4412 * specific for supporting the SLI-4 HBA device it attached to.
4415 lpfc_sli4_driver_resource_unset(struct lpfc_hba
*phba
)
4417 struct lpfc_fcf_conn_entry
*conn_entry
, *next_conn_entry
;
4419 /* Free memory allocated for msi-x interrupt vector entries */
4420 kfree(phba
->sli4_hba
.msix_entries
);
4422 /* Free memory allocated for fast-path work queue handles */
4423 kfree(phba
->sli4_hba
.fcp_eq_hdl
);
4425 /* Free the allocated rpi headers. */
4426 lpfc_sli4_remove_rpi_hdrs(phba
);
4427 lpfc_sli4_remove_rpis(phba
);
4429 /* Free eligible FCF index bmask */
4430 kfree(phba
->fcf
.fcf_rr_bmask
);
4432 /* Free the ELS sgl list */
4433 lpfc_free_active_sgl(phba
);
4434 lpfc_free_sgl_list(phba
);
4436 /* Free the SCSI sgl management array */
4437 kfree(phba
->sli4_hba
.lpfc_scsi_psb_array
);
4439 /* Free the SLI4 queues */
4440 lpfc_sli4_queue_destroy(phba
);
4442 /* Free the completion queue EQ event pool */
4443 lpfc_sli4_cq_event_release_all(phba
);
4444 lpfc_sli4_cq_event_pool_destroy(phba
);
4446 /* Free the bsmbx region. */
4447 lpfc_destroy_bootstrap_mbox(phba
);
4449 /* Free the SLI Layer memory with SLI4 HBAs */
4450 lpfc_mem_free_all(phba
);
4452 /* Free the current connect table */
4453 list_for_each_entry_safe(conn_entry
, next_conn_entry
,
4454 &phba
->fcf_conn_rec_list
, list
) {
4455 list_del_init(&conn_entry
->list
);
4463 * lpfc_init_api_table_setup - Set up init api fucntion jump table
4464 * @phba: The hba struct for which this call is being executed.
4465 * @dev_grp: The HBA PCI-Device group number.
4467 * This routine sets up the device INIT interface API function jump table
4470 * Returns: 0 - success, -ENODEV - failure.
4473 lpfc_init_api_table_setup(struct lpfc_hba
*phba
, uint8_t dev_grp
)
4475 phba
->lpfc_hba_init_link
= lpfc_hba_init_link
;
4476 phba
->lpfc_hba_down_link
= lpfc_hba_down_link
;
4478 case LPFC_PCI_DEV_LP
:
4479 phba
->lpfc_hba_down_post
= lpfc_hba_down_post_s3
;
4480 phba
->lpfc_handle_eratt
= lpfc_handle_eratt_s3
;
4481 phba
->lpfc_stop_port
= lpfc_stop_port_s3
;
4483 case LPFC_PCI_DEV_OC
:
4484 phba
->lpfc_hba_down_post
= lpfc_hba_down_post_s4
;
4485 phba
->lpfc_handle_eratt
= lpfc_handle_eratt_s4
;
4486 phba
->lpfc_stop_port
= lpfc_stop_port_s4
;
4489 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
4490 "1431 Invalid HBA PCI-device group: 0x%x\n",
4499 * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
4500 * @phba: pointer to lpfc hba data structure.
4502 * This routine is invoked to set up the driver internal resources before the
4503 * device specific resource setup to support the HBA device it attached to.
4507 * other values - error
4510 lpfc_setup_driver_resource_phase1(struct lpfc_hba
*phba
)
4513 * Driver resources common to all SLI revisions
4515 atomic_set(&phba
->fast_event_count
, 0);
4516 spin_lock_init(&phba
->hbalock
);
4518 /* Initialize ndlp management spinlock */
4519 spin_lock_init(&phba
->ndlp_lock
);
4521 INIT_LIST_HEAD(&phba
->port_list
);
4522 INIT_LIST_HEAD(&phba
->work_list
);
4523 init_waitqueue_head(&phba
->wait_4_mlo_m_q
);
4525 /* Initialize the wait queue head for the kernel thread */
4526 init_waitqueue_head(&phba
->work_waitq
);
4528 /* Initialize the scsi buffer list used by driver for scsi IO */
4529 spin_lock_init(&phba
->scsi_buf_list_lock
);
4530 INIT_LIST_HEAD(&phba
->lpfc_scsi_buf_list
);
4532 /* Initialize the fabric iocb list */
4533 INIT_LIST_HEAD(&phba
->fabric_iocb_list
);
4535 /* Initialize list to save ELS buffers */
4536 INIT_LIST_HEAD(&phba
->elsbuf
);
4538 /* Initialize FCF connection rec list */
4539 INIT_LIST_HEAD(&phba
->fcf_conn_rec_list
);
4545 * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
4546 * @phba: pointer to lpfc hba data structure.
4548 * This routine is invoked to set up the driver internal resources after the
4549 * device specific resource setup to support the HBA device it attached to.
4553 * other values - error
4556 lpfc_setup_driver_resource_phase2(struct lpfc_hba
*phba
)
4560 /* Startup the kernel thread for this host adapter. */
4561 phba
->worker_thread
= kthread_run(lpfc_do_work
, phba
,
4562 "lpfc_worker_%d", phba
->brd_no
);
4563 if (IS_ERR(phba
->worker_thread
)) {
4564 error
= PTR_ERR(phba
->worker_thread
);
4572 * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
4573 * @phba: pointer to lpfc hba data structure.
4575 * This routine is invoked to unset the driver internal resources set up after
4576 * the device specific resource setup for supporting the HBA device it
4580 lpfc_unset_driver_resource_phase2(struct lpfc_hba
*phba
)
4582 /* Stop kernel worker thread */
4583 kthread_stop(phba
->worker_thread
);
4587 * lpfc_free_iocb_list - Free iocb list.
4588 * @phba: pointer to lpfc hba data structure.
4590 * This routine is invoked to free the driver's IOCB list and memory.
4593 lpfc_free_iocb_list(struct lpfc_hba
*phba
)
4595 struct lpfc_iocbq
*iocbq_entry
= NULL
, *iocbq_next
= NULL
;
4597 spin_lock_irq(&phba
->hbalock
);
4598 list_for_each_entry_safe(iocbq_entry
, iocbq_next
,
4599 &phba
->lpfc_iocb_list
, list
) {
4600 list_del(&iocbq_entry
->list
);
4602 phba
->total_iocbq_bufs
--;
4604 spin_unlock_irq(&phba
->hbalock
);
4610 * lpfc_init_iocb_list - Allocate and initialize iocb list.
4611 * @phba: pointer to lpfc hba data structure.
4613 * This routine is invoked to allocate and initizlize the driver's IOCB
4614 * list and set up the IOCB tag array accordingly.
4618 * other values - error
4621 lpfc_init_iocb_list(struct lpfc_hba
*phba
, int iocb_count
)
4623 struct lpfc_iocbq
*iocbq_entry
= NULL
;
4627 /* Initialize and populate the iocb list per host. */
4628 INIT_LIST_HEAD(&phba
->lpfc_iocb_list
);
4629 for (i
= 0; i
< iocb_count
; i
++) {
4630 iocbq_entry
= kzalloc(sizeof(struct lpfc_iocbq
), GFP_KERNEL
);
4631 if (iocbq_entry
== NULL
) {
4632 printk(KERN_ERR
"%s: only allocated %d iocbs of "
4633 "expected %d count. Unloading driver.\n",
4634 __func__
, i
, LPFC_IOCB_LIST_CNT
);
4635 goto out_free_iocbq
;
4638 iotag
= lpfc_sli_next_iotag(phba
, iocbq_entry
);
4641 printk(KERN_ERR
"%s: failed to allocate IOTAG. "
4642 "Unloading driver.\n", __func__
);
4643 goto out_free_iocbq
;
4645 iocbq_entry
->sli4_xritag
= NO_XRI
;
4647 spin_lock_irq(&phba
->hbalock
);
4648 list_add(&iocbq_entry
->list
, &phba
->lpfc_iocb_list
);
4649 phba
->total_iocbq_bufs
++;
4650 spin_unlock_irq(&phba
->hbalock
);
4656 lpfc_free_iocb_list(phba
);
4662 * lpfc_free_sgl_list - Free sgl list.
4663 * @phba: pointer to lpfc hba data structure.
4665 * This routine is invoked to free the driver's sgl list and memory.
4668 lpfc_free_sgl_list(struct lpfc_hba
*phba
)
4670 struct lpfc_sglq
*sglq_entry
= NULL
, *sglq_next
= NULL
;
4671 LIST_HEAD(sglq_list
);
4673 spin_lock_irq(&phba
->hbalock
);
4674 list_splice_init(&phba
->sli4_hba
.lpfc_sgl_list
, &sglq_list
);
4675 spin_unlock_irq(&phba
->hbalock
);
4677 list_for_each_entry_safe(sglq_entry
, sglq_next
,
4679 list_del(&sglq_entry
->list
);
4680 lpfc_mbuf_free(phba
, sglq_entry
->virt
, sglq_entry
->phys
);
4682 phba
->sli4_hba
.total_sglq_bufs
--;
4684 kfree(phba
->sli4_hba
.lpfc_els_sgl_array
);
4688 * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
4689 * @phba: pointer to lpfc hba data structure.
4691 * This routine is invoked to allocate the driver's active sgl memory.
4692 * This array will hold the sglq_entry's for active IOs.
4695 lpfc_init_active_sgl_array(struct lpfc_hba
*phba
)
4698 size
= sizeof(struct lpfc_sglq
*);
4699 size
*= phba
->sli4_hba
.max_cfg_param
.max_xri
;
4701 phba
->sli4_hba
.lpfc_sglq_active_list
=
4702 kzalloc(size
, GFP_KERNEL
);
4703 if (!phba
->sli4_hba
.lpfc_sglq_active_list
)
4709 * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
4710 * @phba: pointer to lpfc hba data structure.
4712 * This routine is invoked to walk through the array of active sglq entries
4713 * and free all of the resources.
4714 * This is just a place holder for now.
4717 lpfc_free_active_sgl(struct lpfc_hba
*phba
)
4719 kfree(phba
->sli4_hba
.lpfc_sglq_active_list
);
4723 * lpfc_init_sgl_list - Allocate and initialize sgl list.
4724 * @phba: pointer to lpfc hba data structure.
4726 * This routine is invoked to allocate and initizlize the driver's sgl
4727 * list and set up the sgl xritag tag array accordingly.
4731 * other values - error
4734 lpfc_init_sgl_list(struct lpfc_hba
*phba
)
4736 struct lpfc_sglq
*sglq_entry
= NULL
;
4740 els_xri_cnt
= lpfc_sli4_get_els_iocb_cnt(phba
);
4741 lpfc_printf_log(phba
, KERN_INFO
, LOG_SLI
,
4742 "2400 lpfc_init_sgl_list els %d.\n",
4744 /* Initialize and populate the sglq list per host/VF. */
4745 INIT_LIST_HEAD(&phba
->sli4_hba
.lpfc_sgl_list
);
4746 INIT_LIST_HEAD(&phba
->sli4_hba
.lpfc_abts_els_sgl_list
);
4748 /* Sanity check on XRI management */
4749 if (phba
->sli4_hba
.max_cfg_param
.max_xri
<= els_xri_cnt
) {
4750 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
4751 "2562 No room left for SCSI XRI allocation: "
4752 "max_xri=%d, els_xri=%d\n",
4753 phba
->sli4_hba
.max_cfg_param
.max_xri
,
4758 /* Allocate memory for the ELS XRI management array */
4759 phba
->sli4_hba
.lpfc_els_sgl_array
=
4760 kzalloc((sizeof(struct lpfc_sglq
*) * els_xri_cnt
),
4763 if (!phba
->sli4_hba
.lpfc_els_sgl_array
) {
4764 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
4765 "2401 Failed to allocate memory for ELS "
4766 "XRI management array of size %d.\n",
4771 /* Keep the SCSI XRI into the XRI management array */
4772 phba
->sli4_hba
.scsi_xri_max
=
4773 phba
->sli4_hba
.max_cfg_param
.max_xri
- els_xri_cnt
;
4774 phba
->sli4_hba
.scsi_xri_cnt
= 0;
4776 phba
->sli4_hba
.lpfc_scsi_psb_array
=
4777 kzalloc((sizeof(struct lpfc_scsi_buf
*) *
4778 phba
->sli4_hba
.scsi_xri_max
), GFP_KERNEL
);
4780 if (!phba
->sli4_hba
.lpfc_scsi_psb_array
) {
4781 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
4782 "2563 Failed to allocate memory for SCSI "
4783 "XRI management array of size %d.\n",
4784 phba
->sli4_hba
.scsi_xri_max
);
4785 kfree(phba
->sli4_hba
.lpfc_els_sgl_array
);
4789 for (i
= 0; i
< els_xri_cnt
; i
++) {
4790 sglq_entry
= kzalloc(sizeof(struct lpfc_sglq
), GFP_KERNEL
);
4791 if (sglq_entry
== NULL
) {
4792 printk(KERN_ERR
"%s: only allocated %d sgls of "
4793 "expected %d count. Unloading driver.\n",
4794 __func__
, i
, els_xri_cnt
);
4798 sglq_entry
->sli4_xritag
= lpfc_sli4_next_xritag(phba
);
4799 if (sglq_entry
->sli4_xritag
== NO_XRI
) {
4801 printk(KERN_ERR
"%s: failed to allocate XRI.\n"
4802 "Unloading driver.\n", __func__
);
4805 sglq_entry
->buff_type
= GEN_BUFF_TYPE
;
4806 sglq_entry
->virt
= lpfc_mbuf_alloc(phba
, 0, &sglq_entry
->phys
);
4807 if (sglq_entry
->virt
== NULL
) {
4809 printk(KERN_ERR
"%s: failed to allocate mbuf.\n"
4810 "Unloading driver.\n", __func__
);
4813 sglq_entry
->sgl
= sglq_entry
->virt
;
4814 memset(sglq_entry
->sgl
, 0, LPFC_BPL_SIZE
);
4816 /* The list order is used by later block SGL registraton */
4817 spin_lock_irq(&phba
->hbalock
);
4818 sglq_entry
->state
= SGL_FREED
;
4819 list_add_tail(&sglq_entry
->list
, &phba
->sli4_hba
.lpfc_sgl_list
);
4820 phba
->sli4_hba
.lpfc_els_sgl_array
[i
] = sglq_entry
;
4821 phba
->sli4_hba
.total_sglq_bufs
++;
4822 spin_unlock_irq(&phba
->hbalock
);
4827 kfree(phba
->sli4_hba
.lpfc_scsi_psb_array
);
4828 lpfc_free_sgl_list(phba
);
4833 * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
4834 * @phba: pointer to lpfc hba data structure.
4836 * This routine is invoked to post rpi header templates to the
4837 * HBA consistent with the SLI-4 interface spec. This routine
4838 * posts a PAGE_SIZE memory region to the port to hold up to
4839 * PAGE_SIZE modulo 64 rpi context headers.
4840 * No locks are held here because this is an initialization routine
4841 * called only from probe or lpfc_online when interrupts are not
4842 * enabled and the driver is reinitializing the device.
4846 * -ENOMEM - No availble memory
4847 * -EIO - The mailbox failed to complete successfully.
4850 lpfc_sli4_init_rpi_hdrs(struct lpfc_hba
*phba
)
4855 struct lpfc_rpi_hdr
*rpi_hdr
;
4857 INIT_LIST_HEAD(&phba
->sli4_hba
.lpfc_rpi_hdr_list
);
4860 * Provision an rpi bitmask range for discovery. The total count
4861 * is the difference between max and base + 1.
4863 rpi_count
= phba
->sli4_hba
.max_cfg_param
.rpi_base
+
4864 phba
->sli4_hba
.max_cfg_param
.max_rpi
- 1;
4866 longs
= ((rpi_count
) + BITS_PER_LONG
- 1) / BITS_PER_LONG
;
4867 phba
->sli4_hba
.rpi_bmask
= kzalloc(longs
* sizeof(unsigned long),
4869 if (!phba
->sli4_hba
.rpi_bmask
)
4872 rpi_hdr
= lpfc_sli4_create_rpi_hdr(phba
);
4874 lpfc_printf_log(phba
, KERN_ERR
, LOG_MBOX
| LOG_SLI
,
4875 "0391 Error during rpi post operation\n");
4876 lpfc_sli4_remove_rpis(phba
);
4884 * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
4885 * @phba: pointer to lpfc hba data structure.
4887 * This routine is invoked to allocate a single 4KB memory region to
4888 * support rpis and stores them in the phba. This single region
4889 * provides support for up to 64 rpis. The region is used globally
4893 * A valid rpi hdr on success.
4894 * A NULL pointer on any failure.
4896 struct lpfc_rpi_hdr
*
4897 lpfc_sli4_create_rpi_hdr(struct lpfc_hba
*phba
)
4899 uint16_t rpi_limit
, curr_rpi_range
;
4900 struct lpfc_dmabuf
*dmabuf
;
4901 struct lpfc_rpi_hdr
*rpi_hdr
;
4903 rpi_limit
= phba
->sli4_hba
.max_cfg_param
.rpi_base
+
4904 phba
->sli4_hba
.max_cfg_param
.max_rpi
- 1;
4906 spin_lock_irq(&phba
->hbalock
);
4907 curr_rpi_range
= phba
->sli4_hba
.next_rpi
;
4908 spin_unlock_irq(&phba
->hbalock
);
4911 * The port has a limited number of rpis. The increment here
4912 * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
4913 * and to allow the full max_rpi range per port.
4915 if ((curr_rpi_range
+ (LPFC_RPI_HDR_COUNT
- 1)) > rpi_limit
)
4919 * First allocate the protocol header region for the port. The
4920 * port expects a 4KB DMA-mapped memory region that is 4K aligned.
4922 dmabuf
= kzalloc(sizeof(struct lpfc_dmabuf
), GFP_KERNEL
);
4926 dmabuf
->virt
= dma_alloc_coherent(&phba
->pcidev
->dev
,
4927 LPFC_HDR_TEMPLATE_SIZE
,
4930 if (!dmabuf
->virt
) {
4932 goto err_free_dmabuf
;
4935 memset(dmabuf
->virt
, 0, LPFC_HDR_TEMPLATE_SIZE
);
4936 if (!IS_ALIGNED(dmabuf
->phys
, LPFC_HDR_TEMPLATE_SIZE
)) {
4938 goto err_free_coherent
;
4941 /* Save the rpi header data for cleanup later. */
4942 rpi_hdr
= kzalloc(sizeof(struct lpfc_rpi_hdr
), GFP_KERNEL
);
4944 goto err_free_coherent
;
4946 rpi_hdr
->dmabuf
= dmabuf
;
4947 rpi_hdr
->len
= LPFC_HDR_TEMPLATE_SIZE
;
4948 rpi_hdr
->page_count
= 1;
4949 spin_lock_irq(&phba
->hbalock
);
4950 rpi_hdr
->start_rpi
= phba
->sli4_hba
.next_rpi
;
4951 list_add_tail(&rpi_hdr
->list
, &phba
->sli4_hba
.lpfc_rpi_hdr_list
);
4954 * The next_rpi stores the next module-64 rpi value to post
4955 * in any subsequent rpi memory region postings.
4957 phba
->sli4_hba
.next_rpi
+= LPFC_RPI_HDR_COUNT
;
4958 spin_unlock_irq(&phba
->hbalock
);
4962 dma_free_coherent(&phba
->pcidev
->dev
, LPFC_HDR_TEMPLATE_SIZE
,
4963 dmabuf
->virt
, dmabuf
->phys
);
4970 * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
4971 * @phba: pointer to lpfc hba data structure.
4973 * This routine is invoked to remove all memory resources allocated
4974 * to support rpis. This routine presumes the caller has released all
4975 * rpis consumed by fabric or port logins and is prepared to have
4976 * the header pages removed.
4979 lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba
*phba
)
4981 struct lpfc_rpi_hdr
*rpi_hdr
, *next_rpi_hdr
;
4983 list_for_each_entry_safe(rpi_hdr
, next_rpi_hdr
,
4984 &phba
->sli4_hba
.lpfc_rpi_hdr_list
, list
) {
4985 list_del(&rpi_hdr
->list
);
4986 dma_free_coherent(&phba
->pcidev
->dev
, rpi_hdr
->len
,
4987 rpi_hdr
->dmabuf
->virt
, rpi_hdr
->dmabuf
->phys
);
4988 kfree(rpi_hdr
->dmabuf
);
4992 phba
->sli4_hba
.next_rpi
= phba
->sli4_hba
.max_cfg_param
.rpi_base
;
4993 memset(phba
->sli4_hba
.rpi_bmask
, 0, sizeof(*phba
->sli4_hba
.rpi_bmask
));
4997 * lpfc_hba_alloc - Allocate driver hba data structure for a device.
4998 * @pdev: pointer to pci device data structure.
5000 * This routine is invoked to allocate the driver hba data structure for an
5001 * HBA device. If the allocation is successful, the phba reference to the
5002 * PCI device data structure is set.
5005 * pointer to @phba - successful
5008 static struct lpfc_hba
*
5009 lpfc_hba_alloc(struct pci_dev
*pdev
)
5011 struct lpfc_hba
*phba
;
5013 /* Allocate memory for HBA structure */
5014 phba
= kzalloc(sizeof(struct lpfc_hba
), GFP_KERNEL
);
5016 dev_err(&pdev
->dev
, "failed to allocate hba struct\n");
5020 /* Set reference to PCI device in HBA structure */
5021 phba
->pcidev
= pdev
;
5023 /* Assign an unused board number */
5024 phba
->brd_no
= lpfc_get_instance();
5025 if (phba
->brd_no
< 0) {
5030 spin_lock_init(&phba
->ct_ev_lock
);
5031 INIT_LIST_HEAD(&phba
->ct_ev_waiters
);
5037 * lpfc_hba_free - Free driver hba data structure with a device.
5038 * @phba: pointer to lpfc hba data structure.
5040 * This routine is invoked to free the driver hba data structure with an
5044 lpfc_hba_free(struct lpfc_hba
*phba
)
5046 /* Release the driver assigned board number */
5047 idr_remove(&lpfc_hba_index
, phba
->brd_no
);
5054 * lpfc_create_shost - Create hba physical port with associated scsi host.
5055 * @phba: pointer to lpfc hba data structure.
5057 * This routine is invoked to create HBA physical port and associate a SCSI
5062 * other values - error
5065 lpfc_create_shost(struct lpfc_hba
*phba
)
5067 struct lpfc_vport
*vport
;
5068 struct Scsi_Host
*shost
;
5070 /* Initialize HBA FC structure */
5071 phba
->fc_edtov
= FF_DEF_EDTOV
;
5072 phba
->fc_ratov
= FF_DEF_RATOV
;
5073 phba
->fc_altov
= FF_DEF_ALTOV
;
5074 phba
->fc_arbtov
= FF_DEF_ARBTOV
;
5076 atomic_set(&phba
->sdev_cnt
, 0);
5077 vport
= lpfc_create_port(phba
, phba
->brd_no
, &phba
->pcidev
->dev
);
5081 shost
= lpfc_shost_from_vport(vport
);
5082 phba
->pport
= vport
;
5083 lpfc_debugfs_initialize(vport
);
5084 /* Put reference to SCSI host to driver's device private data */
5085 pci_set_drvdata(phba
->pcidev
, shost
);
5091 * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
5092 * @phba: pointer to lpfc hba data structure.
5094 * This routine is invoked to destroy HBA physical port and the associated
5098 lpfc_destroy_shost(struct lpfc_hba
*phba
)
5100 struct lpfc_vport
*vport
= phba
->pport
;
5102 /* Destroy physical port that associated with the SCSI host */
5103 destroy_port(vport
);
5109 * lpfc_setup_bg - Setup Block guard structures and debug areas.
5110 * @phba: pointer to lpfc hba data structure.
5111 * @shost: the shost to be used to detect Block guard settings.
5113 * This routine sets up the local Block guard protocol settings for @shost.
5114 * This routine also allocates memory for debugging bg buffers.
5117 lpfc_setup_bg(struct lpfc_hba
*phba
, struct Scsi_Host
*shost
)
5120 if (lpfc_prot_mask
&& lpfc_prot_guard
) {
5121 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
5122 "1478 Registering BlockGuard with the "
5124 scsi_host_set_prot(shost
, lpfc_prot_mask
);
5125 scsi_host_set_guard(shost
, lpfc_prot_guard
);
5127 if (!_dump_buf_data
) {
5129 spin_lock_init(&_dump_buf_lock
);
5131 (char *) __get_free_pages(GFP_KERNEL
, pagecnt
);
5132 if (_dump_buf_data
) {
5133 lpfc_printf_log(phba
, KERN_ERR
, LOG_BG
,
5134 "9043 BLKGRD: allocated %d pages for "
5135 "_dump_buf_data at 0x%p\n",
5136 (1 << pagecnt
), _dump_buf_data
);
5137 _dump_buf_data_order
= pagecnt
;
5138 memset(_dump_buf_data
, 0,
5139 ((1 << PAGE_SHIFT
) << pagecnt
));
5144 if (!_dump_buf_data_order
)
5145 lpfc_printf_log(phba
, KERN_ERR
, LOG_BG
,
5146 "9044 BLKGRD: ERROR unable to allocate "
5147 "memory for hexdump\n");
5149 lpfc_printf_log(phba
, KERN_ERR
, LOG_BG
,
5150 "9045 BLKGRD: already allocated _dump_buf_data=0x%p"
5151 "\n", _dump_buf_data
);
5152 if (!_dump_buf_dif
) {
5155 (char *) __get_free_pages(GFP_KERNEL
, pagecnt
);
5156 if (_dump_buf_dif
) {
5157 lpfc_printf_log(phba
, KERN_ERR
, LOG_BG
,
5158 "9046 BLKGRD: allocated %d pages for "
5159 "_dump_buf_dif at 0x%p\n",
5160 (1 << pagecnt
), _dump_buf_dif
);
5161 _dump_buf_dif_order
= pagecnt
;
5162 memset(_dump_buf_dif
, 0,
5163 ((1 << PAGE_SHIFT
) << pagecnt
));
5168 if (!_dump_buf_dif_order
)
5169 lpfc_printf_log(phba
, KERN_ERR
, LOG_BG
,
5170 "9047 BLKGRD: ERROR unable to allocate "
5171 "memory for hexdump\n");
5173 lpfc_printf_log(phba
, KERN_ERR
, LOG_BG
,
5174 "9048 BLKGRD: already allocated _dump_buf_dif=0x%p\n",
5179 * lpfc_post_init_setup - Perform necessary device post initialization setup.
5180 * @phba: pointer to lpfc hba data structure.
5182 * This routine is invoked to perform all the necessary post initialization
5183 * setup for the device.
5186 lpfc_post_init_setup(struct lpfc_hba
*phba
)
5188 struct Scsi_Host
*shost
;
5189 struct lpfc_adapter_event_header adapter_event
;
5191 /* Get the default values for Model Name and Description */
5192 lpfc_get_hba_model_desc(phba
, phba
->ModelName
, phba
->ModelDesc
);
5195 * hba setup may have changed the hba_queue_depth so we need to
5196 * adjust the value of can_queue.
5198 shost
= pci_get_drvdata(phba
->pcidev
);
5199 shost
->can_queue
= phba
->cfg_hba_queue_depth
- 10;
5200 if (phba
->sli3_options
& LPFC_SLI3_BG_ENABLED
)
5201 lpfc_setup_bg(phba
, shost
);
5203 lpfc_host_attrib_init(shost
);
5205 if (phba
->cfg_poll
& DISABLE_FCP_RING_INT
) {
5206 spin_lock_irq(shost
->host_lock
);
5207 lpfc_poll_start_timer(phba
);
5208 spin_unlock_irq(shost
->host_lock
);
5211 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
5212 "0428 Perform SCSI scan\n");
5213 /* Send board arrival event to upper layer */
5214 adapter_event
.event_type
= FC_REG_ADAPTER_EVENT
;
5215 adapter_event
.subcategory
= LPFC_EVENT_ARRIVAL
;
5216 fc_host_post_vendor_event(shost
, fc_get_event_number(),
5217 sizeof(adapter_event
),
5218 (char *) &adapter_event
,
5224 * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
5225 * @phba: pointer to lpfc hba data structure.
5227 * This routine is invoked to set up the PCI device memory space for device
5228 * with SLI-3 interface spec.
5232 * other values - error
5235 lpfc_sli_pci_mem_setup(struct lpfc_hba
*phba
)
5237 struct pci_dev
*pdev
;
5238 unsigned long bar0map_len
, bar2map_len
;
5241 int error
= -ENODEV
;
5243 /* Obtain PCI device reference */
5247 pdev
= phba
->pcidev
;
5249 /* Set the device DMA mask size */
5250 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(64)) != 0
5251 || pci_set_consistent_dma_mask(pdev
,DMA_BIT_MASK(64)) != 0) {
5252 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(32)) != 0
5253 || pci_set_consistent_dma_mask(pdev
,DMA_BIT_MASK(32)) != 0) {
5258 /* Get the bus address of Bar0 and Bar2 and the number of bytes
5259 * required by each mapping.
5261 phba
->pci_bar0_map
= pci_resource_start(pdev
, 0);
5262 bar0map_len
= pci_resource_len(pdev
, 0);
5264 phba
->pci_bar2_map
= pci_resource_start(pdev
, 2);
5265 bar2map_len
= pci_resource_len(pdev
, 2);
5267 /* Map HBA SLIM to a kernel virtual address. */
5268 phba
->slim_memmap_p
= ioremap(phba
->pci_bar0_map
, bar0map_len
);
5269 if (!phba
->slim_memmap_p
) {
5270 dev_printk(KERN_ERR
, &pdev
->dev
,
5271 "ioremap failed for SLIM memory.\n");
5275 /* Map HBA Control Registers to a kernel virtual address. */
5276 phba
->ctrl_regs_memmap_p
= ioremap(phba
->pci_bar2_map
, bar2map_len
);
5277 if (!phba
->ctrl_regs_memmap_p
) {
5278 dev_printk(KERN_ERR
, &pdev
->dev
,
5279 "ioremap failed for HBA control registers.\n");
5280 goto out_iounmap_slim
;
5283 /* Allocate memory for SLI-2 structures */
5284 phba
->slim2p
.virt
= dma_alloc_coherent(&pdev
->dev
,
5288 if (!phba
->slim2p
.virt
)
5291 memset(phba
->slim2p
.virt
, 0, SLI2_SLIM_SIZE
);
5292 phba
->mbox
= phba
->slim2p
.virt
+ offsetof(struct lpfc_sli2_slim
, mbx
);
5293 phba
->mbox_ext
= (phba
->slim2p
.virt
+
5294 offsetof(struct lpfc_sli2_slim
, mbx_ext_words
));
5295 phba
->pcb
= (phba
->slim2p
.virt
+ offsetof(struct lpfc_sli2_slim
, pcb
));
5296 phba
->IOCBs
= (phba
->slim2p
.virt
+
5297 offsetof(struct lpfc_sli2_slim
, IOCBs
));
5299 phba
->hbqslimp
.virt
= dma_alloc_coherent(&pdev
->dev
,
5300 lpfc_sli_hbq_size(),
5301 &phba
->hbqslimp
.phys
,
5303 if (!phba
->hbqslimp
.virt
)
5306 hbq_count
= lpfc_sli_hbq_count();
5307 ptr
= phba
->hbqslimp
.virt
;
5308 for (i
= 0; i
< hbq_count
; ++i
) {
5309 phba
->hbqs
[i
].hbq_virt
= ptr
;
5310 INIT_LIST_HEAD(&phba
->hbqs
[i
].hbq_buffer_list
);
5311 ptr
+= (lpfc_hbq_defs
[i
]->entry_count
*
5312 sizeof(struct lpfc_hbq_entry
));
5314 phba
->hbqs
[LPFC_ELS_HBQ
].hbq_alloc_buffer
= lpfc_els_hbq_alloc
;
5315 phba
->hbqs
[LPFC_ELS_HBQ
].hbq_free_buffer
= lpfc_els_hbq_free
;
5317 memset(phba
->hbqslimp
.virt
, 0, lpfc_sli_hbq_size());
5319 INIT_LIST_HEAD(&phba
->rb_pend_list
);
5321 phba
->MBslimaddr
= phba
->slim_memmap_p
;
5322 phba
->HAregaddr
= phba
->ctrl_regs_memmap_p
+ HA_REG_OFFSET
;
5323 phba
->CAregaddr
= phba
->ctrl_regs_memmap_p
+ CA_REG_OFFSET
;
5324 phba
->HSregaddr
= phba
->ctrl_regs_memmap_p
+ HS_REG_OFFSET
;
5325 phba
->HCregaddr
= phba
->ctrl_regs_memmap_p
+ HC_REG_OFFSET
;
5330 dma_free_coherent(&pdev
->dev
, SLI2_SLIM_SIZE
,
5331 phba
->slim2p
.virt
, phba
->slim2p
.phys
);
5333 iounmap(phba
->ctrl_regs_memmap_p
);
5335 iounmap(phba
->slim_memmap_p
);
5341 * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
5342 * @phba: pointer to lpfc hba data structure.
5344 * This routine is invoked to unset the PCI device memory space for device
5345 * with SLI-3 interface spec.
5348 lpfc_sli_pci_mem_unset(struct lpfc_hba
*phba
)
5350 struct pci_dev
*pdev
;
5352 /* Obtain PCI device reference */
5356 pdev
= phba
->pcidev
;
5358 /* Free coherent DMA memory allocated */
5359 dma_free_coherent(&pdev
->dev
, lpfc_sli_hbq_size(),
5360 phba
->hbqslimp
.virt
, phba
->hbqslimp
.phys
);
5361 dma_free_coherent(&pdev
->dev
, SLI2_SLIM_SIZE
,
5362 phba
->slim2p
.virt
, phba
->slim2p
.phys
);
5364 /* I/O memory unmap */
5365 iounmap(phba
->ctrl_regs_memmap_p
);
5366 iounmap(phba
->slim_memmap_p
);
5372 * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
5373 * @phba: pointer to lpfc hba data structure.
5375 * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
5376 * done and check status.
5378 * Return 0 if successful, otherwise -ENODEV.
5381 lpfc_sli4_post_status_check(struct lpfc_hba
*phba
)
5383 struct lpfc_register portsmphr_reg
, uerrlo_reg
, uerrhi_reg
;
5384 struct lpfc_register reg_data
;
5385 int i
, port_error
= 0;
5388 if (!phba
->sli4_hba
.PSMPHRregaddr
)
5391 /* Wait up to 30 seconds for the SLI Port POST done and ready */
5392 for (i
= 0; i
< 3000; i
++) {
5393 portsmphr_reg
.word0
= readl(phba
->sli4_hba
.PSMPHRregaddr
);
5394 if (bf_get(lpfc_port_smphr_perr
, &portsmphr_reg
)) {
5395 /* Port has a fatal POST error, break out */
5396 port_error
= -ENODEV
;
5399 if (LPFC_POST_STAGE_PORT_READY
==
5400 bf_get(lpfc_port_smphr_port_status
, &portsmphr_reg
))
5406 * If there was a port error during POST, then don't proceed with
5407 * other register reads as the data may not be valid. Just exit.
5410 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5411 "1408 Port Failed POST - portsmphr=0x%x, "
5412 "perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, scr1=x%x, "
5413 "scr2=x%x, hscratch=x%x, pstatus=x%x\n",
5414 portsmphr_reg
.word0
,
5415 bf_get(lpfc_port_smphr_perr
, &portsmphr_reg
),
5416 bf_get(lpfc_port_smphr_sfi
, &portsmphr_reg
),
5417 bf_get(lpfc_port_smphr_nip
, &portsmphr_reg
),
5418 bf_get(lpfc_port_smphr_ipc
, &portsmphr_reg
),
5419 bf_get(lpfc_port_smphr_scr1
, &portsmphr_reg
),
5420 bf_get(lpfc_port_smphr_scr2
, &portsmphr_reg
),
5421 bf_get(lpfc_port_smphr_host_scratch
, &portsmphr_reg
),
5422 bf_get(lpfc_port_smphr_port_status
, &portsmphr_reg
));
5424 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
5425 "2534 Device Info: SLIFamily=0x%x, "
5426 "SLIRev=0x%x, IFType=0x%x, SLIHint_1=0x%x, "
5427 "SLIHint_2=0x%x, FT=0x%x\n",
5428 bf_get(lpfc_sli_intf_sli_family
,
5429 &phba
->sli4_hba
.sli_intf
),
5430 bf_get(lpfc_sli_intf_slirev
,
5431 &phba
->sli4_hba
.sli_intf
),
5432 bf_get(lpfc_sli_intf_if_type
,
5433 &phba
->sli4_hba
.sli_intf
),
5434 bf_get(lpfc_sli_intf_sli_hint1
,
5435 &phba
->sli4_hba
.sli_intf
),
5436 bf_get(lpfc_sli_intf_sli_hint2
,
5437 &phba
->sli4_hba
.sli_intf
),
5438 bf_get(lpfc_sli_intf_func_type
,
5439 &phba
->sli4_hba
.sli_intf
));
5441 * Check for other Port errors during the initialization
5442 * process. Fail the load if the port did not come up
5445 if_type
= bf_get(lpfc_sli_intf_if_type
,
5446 &phba
->sli4_hba
.sli_intf
);
5448 case LPFC_SLI_INTF_IF_TYPE_0
:
5449 phba
->sli4_hba
.ue_mask_lo
=
5450 readl(phba
->sli4_hba
.u
.if_type0
.UEMASKLOregaddr
);
5451 phba
->sli4_hba
.ue_mask_hi
=
5452 readl(phba
->sli4_hba
.u
.if_type0
.UEMASKHIregaddr
);
5454 readl(phba
->sli4_hba
.u
.if_type0
.UERRLOregaddr
);
5456 readl(phba
->sli4_hba
.u
.if_type0
.UERRHIregaddr
);
5457 if ((~phba
->sli4_hba
.ue_mask_lo
& uerrlo_reg
.word0
) ||
5458 (~phba
->sli4_hba
.ue_mask_hi
& uerrhi_reg
.word0
)) {
5459 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5460 "1422 Unrecoverable Error "
5461 "Detected during POST "
5462 "uerr_lo_reg=0x%x, "
5463 "uerr_hi_reg=0x%x, "
5464 "ue_mask_lo_reg=0x%x, "
5465 "ue_mask_hi_reg=0x%x\n",
5468 phba
->sli4_hba
.ue_mask_lo
,
5469 phba
->sli4_hba
.ue_mask_hi
);
5470 port_error
= -ENODEV
;
5473 case LPFC_SLI_INTF_IF_TYPE_2
:
5474 /* Final checks. The port status should be clean. */
5476 readl(phba
->sli4_hba
.u
.if_type2
.STATUSregaddr
);
5477 if (bf_get(lpfc_sliport_status_err
, ®_data
)) {
5478 phba
->work_status
[0] =
5479 readl(phba
->sli4_hba
.u
.if_type2
.
5481 phba
->work_status
[1] =
5482 readl(phba
->sli4_hba
.u
.if_type2
.
5484 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5485 "2888 Port Error Detected "
5487 "port status reg 0x%x, "
5488 "port_smphr reg 0x%x, "
5489 "error 1=0x%x, error 2=0x%x\n",
5491 portsmphr_reg
.word0
,
5492 phba
->work_status
[0],
5493 phba
->work_status
[1]);
5494 port_error
= -ENODEV
;
5497 case LPFC_SLI_INTF_IF_TYPE_1
:
5506 * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
5507 * @phba: pointer to lpfc hba data structure.
5508 * @if_type: The SLI4 interface type getting configured.
5510 * This routine is invoked to set up SLI4 BAR0 PCI config space register
5514 lpfc_sli4_bar0_register_memmap(struct lpfc_hba
*phba
, uint32_t if_type
)
5517 case LPFC_SLI_INTF_IF_TYPE_0
:
5518 phba
->sli4_hba
.u
.if_type0
.UERRLOregaddr
=
5519 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_UERR_STATUS_LO
;
5520 phba
->sli4_hba
.u
.if_type0
.UERRHIregaddr
=
5521 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_UERR_STATUS_HI
;
5522 phba
->sli4_hba
.u
.if_type0
.UEMASKLOregaddr
=
5523 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_UE_MASK_LO
;
5524 phba
->sli4_hba
.u
.if_type0
.UEMASKHIregaddr
=
5525 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_UE_MASK_HI
;
5526 phba
->sli4_hba
.SLIINTFregaddr
=
5527 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_SLI_INTF
;
5529 case LPFC_SLI_INTF_IF_TYPE_2
:
5530 phba
->sli4_hba
.u
.if_type2
.ERR1regaddr
=
5531 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_SLIPORT_ERR_1
;
5532 phba
->sli4_hba
.u
.if_type2
.ERR2regaddr
=
5533 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_SLIPORT_ERR_2
;
5534 phba
->sli4_hba
.u
.if_type2
.CTRLregaddr
=
5535 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_SLIPORT_CNTRL
;
5536 phba
->sli4_hba
.u
.if_type2
.STATUSregaddr
=
5537 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_SLIPORT_STATUS
;
5538 phba
->sli4_hba
.SLIINTFregaddr
=
5539 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_SLI_INTF
;
5540 phba
->sli4_hba
.PSMPHRregaddr
=
5541 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_SLIPORT_IF2_SMPHR
;
5542 phba
->sli4_hba
.RQDBregaddr
=
5543 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_RQ_DOORBELL
;
5544 phba
->sli4_hba
.WQDBregaddr
=
5545 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_WQ_DOORBELL
;
5546 phba
->sli4_hba
.EQCQDBregaddr
=
5547 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_EQCQ_DOORBELL
;
5548 phba
->sli4_hba
.MQDBregaddr
=
5549 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_MQ_DOORBELL
;
5550 phba
->sli4_hba
.BMBXregaddr
=
5551 phba
->sli4_hba
.conf_regs_memmap_p
+ LPFC_BMBX
;
5553 case LPFC_SLI_INTF_IF_TYPE_1
:
5555 dev_printk(KERN_ERR
, &phba
->pcidev
->dev
,
5556 "FATAL - unsupported SLI4 interface type - %d\n",
5563 * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
5564 * @phba: pointer to lpfc hba data structure.
5566 * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
5570 lpfc_sli4_bar1_register_memmap(struct lpfc_hba
*phba
)
5572 phba
->sli4_hba
.PSMPHRregaddr
= phba
->sli4_hba
.ctrl_regs_memmap_p
+
5573 LPFC_SLIPORT_IF0_SMPHR
;
5574 phba
->sli4_hba
.ISRregaddr
= phba
->sli4_hba
.ctrl_regs_memmap_p
+
5576 phba
->sli4_hba
.IMRregaddr
= phba
->sli4_hba
.ctrl_regs_memmap_p
+
5578 phba
->sli4_hba
.ISCRregaddr
= phba
->sli4_hba
.ctrl_regs_memmap_p
+
5583 * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
5584 * @phba: pointer to lpfc hba data structure.
5585 * @vf: virtual function number
5587 * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
5588 * based on the given viftual function number, @vf.
5590 * Return 0 if successful, otherwise -ENODEV.
5593 lpfc_sli4_bar2_register_memmap(struct lpfc_hba
*phba
, uint32_t vf
)
5595 if (vf
> LPFC_VIR_FUNC_MAX
)
5598 phba
->sli4_hba
.RQDBregaddr
= (phba
->sli4_hba
.drbl_regs_memmap_p
+
5599 vf
* LPFC_VFR_PAGE_SIZE
+ LPFC_RQ_DOORBELL
);
5600 phba
->sli4_hba
.WQDBregaddr
= (phba
->sli4_hba
.drbl_regs_memmap_p
+
5601 vf
* LPFC_VFR_PAGE_SIZE
+ LPFC_WQ_DOORBELL
);
5602 phba
->sli4_hba
.EQCQDBregaddr
= (phba
->sli4_hba
.drbl_regs_memmap_p
+
5603 vf
* LPFC_VFR_PAGE_SIZE
+ LPFC_EQCQ_DOORBELL
);
5604 phba
->sli4_hba
.MQDBregaddr
= (phba
->sli4_hba
.drbl_regs_memmap_p
+
5605 vf
* LPFC_VFR_PAGE_SIZE
+ LPFC_MQ_DOORBELL
);
5606 phba
->sli4_hba
.BMBXregaddr
= (phba
->sli4_hba
.drbl_regs_memmap_p
+
5607 vf
* LPFC_VFR_PAGE_SIZE
+ LPFC_BMBX
);
5612 * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
5613 * @phba: pointer to lpfc hba data structure.
5615 * This routine is invoked to create the bootstrap mailbox
5616 * region consistent with the SLI-4 interface spec. This
5617 * routine allocates all memory necessary to communicate
5618 * mailbox commands to the port and sets up all alignment
5619 * needs. No locks are expected to be held when calling
5624 * -ENOMEM - could not allocated memory.
5627 lpfc_create_bootstrap_mbox(struct lpfc_hba
*phba
)
5630 struct lpfc_dmabuf
*dmabuf
;
5631 struct dma_address
*dma_address
;
5635 dmabuf
= kzalloc(sizeof(struct lpfc_dmabuf
), GFP_KERNEL
);
5640 * The bootstrap mailbox region is comprised of 2 parts
5641 * plus an alignment restriction of 16 bytes.
5643 bmbx_size
= sizeof(struct lpfc_bmbx_create
) + (LPFC_ALIGN_16_BYTE
- 1);
5644 dmabuf
->virt
= dma_alloc_coherent(&phba
->pcidev
->dev
,
5648 if (!dmabuf
->virt
) {
5652 memset(dmabuf
->virt
, 0, bmbx_size
);
5655 * Initialize the bootstrap mailbox pointers now so that the register
5656 * operations are simple later. The mailbox dma address is required
5657 * to be 16-byte aligned. Also align the virtual memory as each
5658 * maibox is copied into the bmbx mailbox region before issuing the
5659 * command to the port.
5661 phba
->sli4_hba
.bmbx
.dmabuf
= dmabuf
;
5662 phba
->sli4_hba
.bmbx
.bmbx_size
= bmbx_size
;
5664 phba
->sli4_hba
.bmbx
.avirt
= PTR_ALIGN(dmabuf
->virt
,
5665 LPFC_ALIGN_16_BYTE
);
5666 phba
->sli4_hba
.bmbx
.aphys
= ALIGN(dmabuf
->phys
,
5667 LPFC_ALIGN_16_BYTE
);
5670 * Set the high and low physical addresses now. The SLI4 alignment
5671 * requirement is 16 bytes and the mailbox is posted to the port
5672 * as two 30-bit addresses. The other data is a bit marking whether
5673 * the 30-bit address is the high or low address.
5674 * Upcast bmbx aphys to 64bits so shift instruction compiles
5675 * clean on 32 bit machines.
5677 dma_address
= &phba
->sli4_hba
.bmbx
.dma_address
;
5678 phys_addr
= (uint64_t)phba
->sli4_hba
.bmbx
.aphys
;
5679 pa_addr
= (uint32_t) ((phys_addr
>> 34) & 0x3fffffff);
5680 dma_address
->addr_hi
= (uint32_t) ((pa_addr
<< 2) |
5681 LPFC_BMBX_BIT1_ADDR_HI
);
5683 pa_addr
= (uint32_t) ((phba
->sli4_hba
.bmbx
.aphys
>> 4) & 0x3fffffff);
5684 dma_address
->addr_lo
= (uint32_t) ((pa_addr
<< 2) |
5685 LPFC_BMBX_BIT1_ADDR_LO
);
5690 * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
5691 * @phba: pointer to lpfc hba data structure.
5693 * This routine is invoked to teardown the bootstrap mailbox
5694 * region and release all host resources. This routine requires
5695 * the caller to ensure all mailbox commands recovered, no
5696 * additional mailbox comands are sent, and interrupts are disabled
5697 * before calling this routine.
5701 lpfc_destroy_bootstrap_mbox(struct lpfc_hba
*phba
)
5703 dma_free_coherent(&phba
->pcidev
->dev
,
5704 phba
->sli4_hba
.bmbx
.bmbx_size
,
5705 phba
->sli4_hba
.bmbx
.dmabuf
->virt
,
5706 phba
->sli4_hba
.bmbx
.dmabuf
->phys
);
5708 kfree(phba
->sli4_hba
.bmbx
.dmabuf
);
5709 memset(&phba
->sli4_hba
.bmbx
, 0, sizeof(struct lpfc_bmbx
));
5713 * lpfc_sli4_read_config - Get the config parameters.
5714 * @phba: pointer to lpfc hba data structure.
5716 * This routine is invoked to read the configuration parameters from the HBA.
5717 * The configuration parameters are used to set the base and maximum values
5718 * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
5719 * allocation for the port.
5723 * -ENOMEM - No availble memory
5724 * -EIO - The mailbox failed to complete successfully.
5727 lpfc_sli4_read_config(struct lpfc_hba
*phba
)
5730 struct lpfc_mbx_read_config
*rd_config
;
5733 pmb
= (LPFC_MBOXQ_t
*) mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
5735 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
5736 "2011 Unable to allocate memory for issuing "
5737 "SLI_CONFIG_SPECIAL mailbox command\n");
5741 lpfc_read_config(phba
, pmb
);
5743 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_POLL
);
5744 if (rc
!= MBX_SUCCESS
) {
5745 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
5746 "2012 Mailbox failed , mbxCmd x%x "
5747 "READ_CONFIG, mbxStatus x%x\n",
5748 bf_get(lpfc_mqe_command
, &pmb
->u
.mqe
),
5749 bf_get(lpfc_mqe_status
, &pmb
->u
.mqe
));
5752 rd_config
= &pmb
->u
.mqe
.un
.rd_config
;
5753 phba
->sli4_hba
.max_cfg_param
.max_xri
=
5754 bf_get(lpfc_mbx_rd_conf_xri_count
, rd_config
);
5755 phba
->sli4_hba
.max_cfg_param
.xri_base
=
5756 bf_get(lpfc_mbx_rd_conf_xri_base
, rd_config
);
5757 phba
->sli4_hba
.max_cfg_param
.max_vpi
=
5758 bf_get(lpfc_mbx_rd_conf_vpi_count
, rd_config
);
5759 phba
->sli4_hba
.max_cfg_param
.vpi_base
=
5760 bf_get(lpfc_mbx_rd_conf_vpi_base
, rd_config
);
5761 phba
->sli4_hba
.max_cfg_param
.max_rpi
=
5762 bf_get(lpfc_mbx_rd_conf_rpi_count
, rd_config
);
5763 phba
->sli4_hba
.max_cfg_param
.rpi_base
=
5764 bf_get(lpfc_mbx_rd_conf_rpi_base
, rd_config
);
5765 phba
->sli4_hba
.max_cfg_param
.max_vfi
=
5766 bf_get(lpfc_mbx_rd_conf_vfi_count
, rd_config
);
5767 phba
->sli4_hba
.max_cfg_param
.vfi_base
=
5768 bf_get(lpfc_mbx_rd_conf_vfi_base
, rd_config
);
5769 phba
->sli4_hba
.max_cfg_param
.max_fcfi
=
5770 bf_get(lpfc_mbx_rd_conf_fcfi_count
, rd_config
);
5771 phba
->sli4_hba
.max_cfg_param
.fcfi_base
=
5772 bf_get(lpfc_mbx_rd_conf_fcfi_base
, rd_config
);
5773 phba
->sli4_hba
.max_cfg_param
.max_eq
=
5774 bf_get(lpfc_mbx_rd_conf_eq_count
, rd_config
);
5775 phba
->sli4_hba
.max_cfg_param
.max_rq
=
5776 bf_get(lpfc_mbx_rd_conf_rq_count
, rd_config
);
5777 phba
->sli4_hba
.max_cfg_param
.max_wq
=
5778 bf_get(lpfc_mbx_rd_conf_wq_count
, rd_config
);
5779 phba
->sli4_hba
.max_cfg_param
.max_cq
=
5780 bf_get(lpfc_mbx_rd_conf_cq_count
, rd_config
);
5781 phba
->lmt
= bf_get(lpfc_mbx_rd_conf_lmt
, rd_config
);
5782 phba
->sli4_hba
.next_xri
= phba
->sli4_hba
.max_cfg_param
.xri_base
;
5783 phba
->vpi_base
= phba
->sli4_hba
.max_cfg_param
.vpi_base
;
5784 phba
->vfi_base
= phba
->sli4_hba
.max_cfg_param
.vfi_base
;
5785 phba
->sli4_hba
.next_rpi
= phba
->sli4_hba
.max_cfg_param
.rpi_base
;
5786 phba
->max_vpi
= (phba
->sli4_hba
.max_cfg_param
.max_vpi
> 0) ?
5787 (phba
->sli4_hba
.max_cfg_param
.max_vpi
- 1) : 0;
5788 phba
->max_vports
= phba
->max_vpi
;
5789 lpfc_printf_log(phba
, KERN_INFO
, LOG_SLI
,
5790 "2003 cfg params XRI(B:%d M:%d), "
5794 "FCFI(B:%d M:%d)\n",
5795 phba
->sli4_hba
.max_cfg_param
.xri_base
,
5796 phba
->sli4_hba
.max_cfg_param
.max_xri
,
5797 phba
->sli4_hba
.max_cfg_param
.vpi_base
,
5798 phba
->sli4_hba
.max_cfg_param
.max_vpi
,
5799 phba
->sli4_hba
.max_cfg_param
.vfi_base
,
5800 phba
->sli4_hba
.max_cfg_param
.max_vfi
,
5801 phba
->sli4_hba
.max_cfg_param
.rpi_base
,
5802 phba
->sli4_hba
.max_cfg_param
.max_rpi
,
5803 phba
->sli4_hba
.max_cfg_param
.fcfi_base
,
5804 phba
->sli4_hba
.max_cfg_param
.max_fcfi
);
5806 mempool_free(pmb
, phba
->mbox_mem_pool
);
5808 /* Reset the DFT_HBA_Q_DEPTH to the max xri */
5809 if (phba
->cfg_hba_queue_depth
>
5810 (phba
->sli4_hba
.max_cfg_param
.max_xri
-
5811 lpfc_sli4_get_els_iocb_cnt(phba
)))
5812 phba
->cfg_hba_queue_depth
=
5813 phba
->sli4_hba
.max_cfg_param
.max_xri
-
5814 lpfc_sli4_get_els_iocb_cnt(phba
);
5819 * lpfc_setup_endian_order - Write endian order to an SLI4 if_type 0 port.
5820 * @phba: pointer to lpfc hba data structure.
5822 * This routine is invoked to setup the port-side endian order when
5823 * the port if_type is 0. This routine has no function for other
5828 * -ENOMEM - No availble memory
5829 * -EIO - The mailbox failed to complete successfully.
5832 lpfc_setup_endian_order(struct lpfc_hba
*phba
)
5834 LPFC_MBOXQ_t
*mboxq
;
5835 uint32_t if_type
, rc
= 0;
5836 uint32_t endian_mb_data
[2] = {HOST_ENDIAN_LOW_WORD0
,
5837 HOST_ENDIAN_HIGH_WORD1
};
5839 if_type
= bf_get(lpfc_sli_intf_if_type
, &phba
->sli4_hba
.sli_intf
);
5841 case LPFC_SLI_INTF_IF_TYPE_0
:
5842 mboxq
= (LPFC_MBOXQ_t
*) mempool_alloc(phba
->mbox_mem_pool
,
5845 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5846 "0492 Unable to allocate memory for "
5847 "issuing SLI_CONFIG_SPECIAL mailbox "
5853 * The SLI4_CONFIG_SPECIAL mailbox command requires the first
5854 * two words to contain special data values and no other data.
5856 memset(mboxq
, 0, sizeof(LPFC_MBOXQ_t
));
5857 memcpy(&mboxq
->u
.mqe
, &endian_mb_data
, sizeof(endian_mb_data
));
5858 rc
= lpfc_sli_issue_mbox(phba
, mboxq
, MBX_POLL
);
5859 if (rc
!= MBX_SUCCESS
) {
5860 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5861 "0493 SLI_CONFIG_SPECIAL mailbox "
5862 "failed with status x%x\n",
5866 mempool_free(mboxq
, phba
->mbox_mem_pool
);
5868 case LPFC_SLI_INTF_IF_TYPE_2
:
5869 case LPFC_SLI_INTF_IF_TYPE_1
:
5877 * lpfc_sli4_queue_create - Create all the SLI4 queues
5878 * @phba: pointer to lpfc hba data structure.
5880 * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
5881 * operation. For each SLI4 queue type, the parameters such as queue entry
5882 * count (queue depth) shall be taken from the module parameter. For now,
5883 * we just use some constant number as place holder.
5887 * -ENOMEM - No availble memory
5888 * -EIO - The mailbox failed to complete successfully.
5891 lpfc_sli4_queue_create(struct lpfc_hba
*phba
)
5893 struct lpfc_queue
*qdesc
;
5894 int fcp_eqidx
, fcp_cqidx
, fcp_wqidx
;
5895 int cfg_fcp_wq_count
;
5896 int cfg_fcp_eq_count
;
5899 * Sanity check for confiugred queue parameters against the run-time
5903 /* Sanity check on FCP fast-path WQ parameters */
5904 cfg_fcp_wq_count
= phba
->cfg_fcp_wq_count
;
5905 if (cfg_fcp_wq_count
>
5906 (phba
->sli4_hba
.max_cfg_param
.max_wq
- LPFC_SP_WQN_DEF
)) {
5907 cfg_fcp_wq_count
= phba
->sli4_hba
.max_cfg_param
.max_wq
-
5909 if (cfg_fcp_wq_count
< LPFC_FP_WQN_MIN
) {
5910 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5911 "2581 Not enough WQs (%d) from "
5912 "the pci function for supporting "
5914 phba
->sli4_hba
.max_cfg_param
.max_wq
,
5915 phba
->cfg_fcp_wq_count
);
5918 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
5919 "2582 Not enough WQs (%d) from the pci "
5920 "function for supporting the requested "
5921 "FCP WQs (%d), the actual FCP WQs can "
5922 "be supported: %d\n",
5923 phba
->sli4_hba
.max_cfg_param
.max_wq
,
5924 phba
->cfg_fcp_wq_count
, cfg_fcp_wq_count
);
5926 /* The actual number of FCP work queues adopted */
5927 phba
->cfg_fcp_wq_count
= cfg_fcp_wq_count
;
5929 /* Sanity check on FCP fast-path EQ parameters */
5930 cfg_fcp_eq_count
= phba
->cfg_fcp_eq_count
;
5931 if (cfg_fcp_eq_count
>
5932 (phba
->sli4_hba
.max_cfg_param
.max_eq
- LPFC_SP_EQN_DEF
)) {
5933 cfg_fcp_eq_count
= phba
->sli4_hba
.max_cfg_param
.max_eq
-
5935 if (cfg_fcp_eq_count
< LPFC_FP_EQN_MIN
) {
5936 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5937 "2574 Not enough EQs (%d) from the "
5938 "pci function for supporting FCP "
5940 phba
->sli4_hba
.max_cfg_param
.max_eq
,
5941 phba
->cfg_fcp_eq_count
);
5944 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
5945 "2575 Not enough EQs (%d) from the pci "
5946 "function for supporting the requested "
5947 "FCP EQs (%d), the actual FCP EQs can "
5948 "be supported: %d\n",
5949 phba
->sli4_hba
.max_cfg_param
.max_eq
,
5950 phba
->cfg_fcp_eq_count
, cfg_fcp_eq_count
);
5952 /* It does not make sense to have more EQs than WQs */
5953 if (cfg_fcp_eq_count
> phba
->cfg_fcp_wq_count
) {
5954 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
5955 "2593 The FCP EQ count(%d) cannot be greater "
5956 "than the FCP WQ count(%d), limiting the "
5957 "FCP EQ count to %d\n", cfg_fcp_eq_count
,
5958 phba
->cfg_fcp_wq_count
,
5959 phba
->cfg_fcp_wq_count
);
5960 cfg_fcp_eq_count
= phba
->cfg_fcp_wq_count
;
5962 /* The actual number of FCP event queues adopted */
5963 phba
->cfg_fcp_eq_count
= cfg_fcp_eq_count
;
5964 /* The overall number of event queues used */
5965 phba
->sli4_hba
.cfg_eqn
= phba
->cfg_fcp_eq_count
+ LPFC_SP_EQN_DEF
;
5968 * Create Event Queues (EQs)
5971 /* Get EQ depth from module parameter, fake the default for now */
5972 phba
->sli4_hba
.eq_esize
= LPFC_EQE_SIZE_4B
;
5973 phba
->sli4_hba
.eq_ecount
= LPFC_EQE_DEF_COUNT
;
5975 /* Create slow path event queue */
5976 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.eq_esize
,
5977 phba
->sli4_hba
.eq_ecount
);
5979 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5980 "0496 Failed allocate slow-path EQ\n");
5983 phba
->sli4_hba
.sp_eq
= qdesc
;
5985 /* Create fast-path FCP Event Queue(s) */
5986 phba
->sli4_hba
.fp_eq
= kzalloc((sizeof(struct lpfc_queue
*) *
5987 phba
->cfg_fcp_eq_count
), GFP_KERNEL
);
5988 if (!phba
->sli4_hba
.fp_eq
) {
5989 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5990 "2576 Failed allocate memory for fast-path "
5991 "EQ record array\n");
5992 goto out_free_sp_eq
;
5994 for (fcp_eqidx
= 0; fcp_eqidx
< phba
->cfg_fcp_eq_count
; fcp_eqidx
++) {
5995 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.eq_esize
,
5996 phba
->sli4_hba
.eq_ecount
);
5998 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5999 "0497 Failed allocate fast-path EQ\n");
6000 goto out_free_fp_eq
;
6002 phba
->sli4_hba
.fp_eq
[fcp_eqidx
] = qdesc
;
6006 * Create Complete Queues (CQs)
6009 /* Get CQ depth from module parameter, fake the default for now */
6010 phba
->sli4_hba
.cq_esize
= LPFC_CQE_SIZE
;
6011 phba
->sli4_hba
.cq_ecount
= LPFC_CQE_DEF_COUNT
;
6013 /* Create slow-path Mailbox Command Complete Queue */
6014 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.cq_esize
,
6015 phba
->sli4_hba
.cq_ecount
);
6017 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6018 "0500 Failed allocate slow-path mailbox CQ\n");
6019 goto out_free_fp_eq
;
6021 phba
->sli4_hba
.mbx_cq
= qdesc
;
6023 /* Create slow-path ELS Complete Queue */
6024 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.cq_esize
,
6025 phba
->sli4_hba
.cq_ecount
);
6027 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6028 "0501 Failed allocate slow-path ELS CQ\n");
6029 goto out_free_mbx_cq
;
6031 phba
->sli4_hba
.els_cq
= qdesc
;
6034 /* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
6035 phba
->sli4_hba
.fcp_cq
= kzalloc((sizeof(struct lpfc_queue
*) *
6036 phba
->cfg_fcp_eq_count
), GFP_KERNEL
);
6037 if (!phba
->sli4_hba
.fcp_cq
) {
6038 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6039 "2577 Failed allocate memory for fast-path "
6040 "CQ record array\n");
6041 goto out_free_els_cq
;
6043 for (fcp_cqidx
= 0; fcp_cqidx
< phba
->cfg_fcp_eq_count
; fcp_cqidx
++) {
6044 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.cq_esize
,
6045 phba
->sli4_hba
.cq_ecount
);
6047 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6048 "0499 Failed allocate fast-path FCP "
6049 "CQ (%d)\n", fcp_cqidx
);
6050 goto out_free_fcp_cq
;
6052 phba
->sli4_hba
.fcp_cq
[fcp_cqidx
] = qdesc
;
6055 /* Create Mailbox Command Queue */
6056 phba
->sli4_hba
.mq_esize
= LPFC_MQE_SIZE
;
6057 phba
->sli4_hba
.mq_ecount
= LPFC_MQE_DEF_COUNT
;
6059 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.mq_esize
,
6060 phba
->sli4_hba
.mq_ecount
);
6062 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6063 "0505 Failed allocate slow-path MQ\n");
6064 goto out_free_fcp_cq
;
6066 phba
->sli4_hba
.mbx_wq
= qdesc
;
6069 * Create all the Work Queues (WQs)
6071 phba
->sli4_hba
.wq_esize
= LPFC_WQE_SIZE
;
6072 phba
->sli4_hba
.wq_ecount
= LPFC_WQE_DEF_COUNT
;
6074 /* Create slow-path ELS Work Queue */
6075 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.wq_esize
,
6076 phba
->sli4_hba
.wq_ecount
);
6078 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6079 "0504 Failed allocate slow-path ELS WQ\n");
6080 goto out_free_mbx_wq
;
6082 phba
->sli4_hba
.els_wq
= qdesc
;
6084 /* Create fast-path FCP Work Queue(s) */
6085 phba
->sli4_hba
.fcp_wq
= kzalloc((sizeof(struct lpfc_queue
*) *
6086 phba
->cfg_fcp_wq_count
), GFP_KERNEL
);
6087 if (!phba
->sli4_hba
.fcp_wq
) {
6088 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6089 "2578 Failed allocate memory for fast-path "
6090 "WQ record array\n");
6091 goto out_free_els_wq
;
6093 for (fcp_wqidx
= 0; fcp_wqidx
< phba
->cfg_fcp_wq_count
; fcp_wqidx
++) {
6094 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.wq_esize
,
6095 phba
->sli4_hba
.wq_ecount
);
6097 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6098 "0503 Failed allocate fast-path FCP "
6099 "WQ (%d)\n", fcp_wqidx
);
6100 goto out_free_fcp_wq
;
6102 phba
->sli4_hba
.fcp_wq
[fcp_wqidx
] = qdesc
;
6106 * Create Receive Queue (RQ)
6108 phba
->sli4_hba
.rq_esize
= LPFC_RQE_SIZE
;
6109 phba
->sli4_hba
.rq_ecount
= LPFC_RQE_DEF_COUNT
;
6111 /* Create Receive Queue for header */
6112 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.rq_esize
,
6113 phba
->sli4_hba
.rq_ecount
);
6115 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6116 "0506 Failed allocate receive HRQ\n");
6117 goto out_free_fcp_wq
;
6119 phba
->sli4_hba
.hdr_rq
= qdesc
;
6121 /* Create Receive Queue for data */
6122 qdesc
= lpfc_sli4_queue_alloc(phba
, phba
->sli4_hba
.rq_esize
,
6123 phba
->sli4_hba
.rq_ecount
);
6125 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6126 "0507 Failed allocate receive DRQ\n");
6127 goto out_free_hdr_rq
;
6129 phba
->sli4_hba
.dat_rq
= qdesc
;
6134 lpfc_sli4_queue_free(phba
->sli4_hba
.hdr_rq
);
6135 phba
->sli4_hba
.hdr_rq
= NULL
;
6137 for (--fcp_wqidx
; fcp_wqidx
>= 0; fcp_wqidx
--) {
6138 lpfc_sli4_queue_free(phba
->sli4_hba
.fcp_wq
[fcp_wqidx
]);
6139 phba
->sli4_hba
.fcp_wq
[fcp_wqidx
] = NULL
;
6141 kfree(phba
->sli4_hba
.fcp_wq
);
6143 lpfc_sli4_queue_free(phba
->sli4_hba
.els_wq
);
6144 phba
->sli4_hba
.els_wq
= NULL
;
6146 lpfc_sli4_queue_free(phba
->sli4_hba
.mbx_wq
);
6147 phba
->sli4_hba
.mbx_wq
= NULL
;
6149 for (--fcp_cqidx
; fcp_cqidx
>= 0; fcp_cqidx
--) {
6150 lpfc_sli4_queue_free(phba
->sli4_hba
.fcp_cq
[fcp_cqidx
]);
6151 phba
->sli4_hba
.fcp_cq
[fcp_cqidx
] = NULL
;
6153 kfree(phba
->sli4_hba
.fcp_cq
);
6155 lpfc_sli4_queue_free(phba
->sli4_hba
.els_cq
);
6156 phba
->sli4_hba
.els_cq
= NULL
;
6158 lpfc_sli4_queue_free(phba
->sli4_hba
.mbx_cq
);
6159 phba
->sli4_hba
.mbx_cq
= NULL
;
6161 for (--fcp_eqidx
; fcp_eqidx
>= 0; fcp_eqidx
--) {
6162 lpfc_sli4_queue_free(phba
->sli4_hba
.fp_eq
[fcp_eqidx
]);
6163 phba
->sli4_hba
.fp_eq
[fcp_eqidx
] = NULL
;
6165 kfree(phba
->sli4_hba
.fp_eq
);
6167 lpfc_sli4_queue_free(phba
->sli4_hba
.sp_eq
);
6168 phba
->sli4_hba
.sp_eq
= NULL
;
6174 * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
6175 * @phba: pointer to lpfc hba data structure.
6177 * This routine is invoked to release all the SLI4 queues with the FCoE HBA
6182 * -ENOMEM - No availble memory
6183 * -EIO - The mailbox failed to complete successfully.
6186 lpfc_sli4_queue_destroy(struct lpfc_hba
*phba
)
6190 /* Release mailbox command work queue */
6191 lpfc_sli4_queue_free(phba
->sli4_hba
.mbx_wq
);
6192 phba
->sli4_hba
.mbx_wq
= NULL
;
6194 /* Release ELS work queue */
6195 lpfc_sli4_queue_free(phba
->sli4_hba
.els_wq
);
6196 phba
->sli4_hba
.els_wq
= NULL
;
6198 /* Release FCP work queue */
6199 for (fcp_qidx
= 0; fcp_qidx
< phba
->cfg_fcp_wq_count
; fcp_qidx
++)
6200 lpfc_sli4_queue_free(phba
->sli4_hba
.fcp_wq
[fcp_qidx
]);
6201 kfree(phba
->sli4_hba
.fcp_wq
);
6202 phba
->sli4_hba
.fcp_wq
= NULL
;
6204 /* Release unsolicited receive queue */
6205 lpfc_sli4_queue_free(phba
->sli4_hba
.hdr_rq
);
6206 phba
->sli4_hba
.hdr_rq
= NULL
;
6207 lpfc_sli4_queue_free(phba
->sli4_hba
.dat_rq
);
6208 phba
->sli4_hba
.dat_rq
= NULL
;
6210 /* Release ELS complete queue */
6211 lpfc_sli4_queue_free(phba
->sli4_hba
.els_cq
);
6212 phba
->sli4_hba
.els_cq
= NULL
;
6214 /* Release mailbox command complete queue */
6215 lpfc_sli4_queue_free(phba
->sli4_hba
.mbx_cq
);
6216 phba
->sli4_hba
.mbx_cq
= NULL
;
6218 /* Release FCP response complete queue */
6219 for (fcp_qidx
= 0; fcp_qidx
< phba
->cfg_fcp_eq_count
; fcp_qidx
++)
6220 lpfc_sli4_queue_free(phba
->sli4_hba
.fcp_cq
[fcp_qidx
]);
6221 kfree(phba
->sli4_hba
.fcp_cq
);
6222 phba
->sli4_hba
.fcp_cq
= NULL
;
6224 /* Release fast-path event queue */
6225 for (fcp_qidx
= 0; fcp_qidx
< phba
->cfg_fcp_eq_count
; fcp_qidx
++)
6226 lpfc_sli4_queue_free(phba
->sli4_hba
.fp_eq
[fcp_qidx
]);
6227 kfree(phba
->sli4_hba
.fp_eq
);
6228 phba
->sli4_hba
.fp_eq
= NULL
;
6230 /* Release slow-path event queue */
6231 lpfc_sli4_queue_free(phba
->sli4_hba
.sp_eq
);
6232 phba
->sli4_hba
.sp_eq
= NULL
;
6238 * lpfc_sli4_queue_setup - Set up all the SLI4 queues
6239 * @phba: pointer to lpfc hba data structure.
6241 * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
6246 * -ENOMEM - No availble memory
6247 * -EIO - The mailbox failed to complete successfully.
6250 lpfc_sli4_queue_setup(struct lpfc_hba
*phba
)
6253 int fcp_eqidx
, fcp_cqidx
, fcp_wqidx
;
6254 int fcp_cq_index
= 0;
6257 * Set up Event Queues (EQs)
6260 /* Set up slow-path event queue */
6261 if (!phba
->sli4_hba
.sp_eq
) {
6262 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6263 "0520 Slow-path EQ not allocated\n");
6266 rc
= lpfc_eq_create(phba
, phba
->sli4_hba
.sp_eq
,
6269 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6270 "0521 Failed setup of slow-path EQ: "
6274 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6275 "2583 Slow-path EQ setup: queue-id=%d\n",
6276 phba
->sli4_hba
.sp_eq
->queue_id
);
6278 /* Set up fast-path event queue */
6279 for (fcp_eqidx
= 0; fcp_eqidx
< phba
->cfg_fcp_eq_count
; fcp_eqidx
++) {
6280 if (!phba
->sli4_hba
.fp_eq
[fcp_eqidx
]) {
6281 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6282 "0522 Fast-path EQ (%d) not "
6283 "allocated\n", fcp_eqidx
);
6284 goto out_destroy_fp_eq
;
6286 rc
= lpfc_eq_create(phba
, phba
->sli4_hba
.fp_eq
[fcp_eqidx
],
6287 phba
->cfg_fcp_imax
);
6289 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6290 "0523 Failed setup of fast-path EQ "
6291 "(%d), rc = 0x%x\n", fcp_eqidx
, rc
);
6292 goto out_destroy_fp_eq
;
6294 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6295 "2584 Fast-path EQ setup: "
6296 "queue[%d]-id=%d\n", fcp_eqidx
,
6297 phba
->sli4_hba
.fp_eq
[fcp_eqidx
]->queue_id
);
6301 * Set up Complete Queues (CQs)
6304 /* Set up slow-path MBOX Complete Queue as the first CQ */
6305 if (!phba
->sli4_hba
.mbx_cq
) {
6306 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6307 "0528 Mailbox CQ not allocated\n");
6308 goto out_destroy_fp_eq
;
6310 rc
= lpfc_cq_create(phba
, phba
->sli4_hba
.mbx_cq
, phba
->sli4_hba
.sp_eq
,
6311 LPFC_MCQ
, LPFC_MBOX
);
6313 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6314 "0529 Failed setup of slow-path mailbox CQ: "
6316 goto out_destroy_fp_eq
;
6318 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6319 "2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
6320 phba
->sli4_hba
.mbx_cq
->queue_id
,
6321 phba
->sli4_hba
.sp_eq
->queue_id
);
6323 /* Set up slow-path ELS Complete Queue */
6324 if (!phba
->sli4_hba
.els_cq
) {
6325 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6326 "0530 ELS CQ not allocated\n");
6327 goto out_destroy_mbx_cq
;
6329 rc
= lpfc_cq_create(phba
, phba
->sli4_hba
.els_cq
, phba
->sli4_hba
.sp_eq
,
6330 LPFC_WCQ
, LPFC_ELS
);
6332 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6333 "0531 Failed setup of slow-path ELS CQ: "
6335 goto out_destroy_mbx_cq
;
6337 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6338 "2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
6339 phba
->sli4_hba
.els_cq
->queue_id
,
6340 phba
->sli4_hba
.sp_eq
->queue_id
);
6342 /* Set up fast-path FCP Response Complete Queue */
6343 for (fcp_cqidx
= 0; fcp_cqidx
< phba
->cfg_fcp_eq_count
; fcp_cqidx
++) {
6344 if (!phba
->sli4_hba
.fcp_cq
[fcp_cqidx
]) {
6345 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6346 "0526 Fast-path FCP CQ (%d) not "
6347 "allocated\n", fcp_cqidx
);
6348 goto out_destroy_fcp_cq
;
6350 rc
= lpfc_cq_create(phba
, phba
->sli4_hba
.fcp_cq
[fcp_cqidx
],
6351 phba
->sli4_hba
.fp_eq
[fcp_cqidx
],
6352 LPFC_WCQ
, LPFC_FCP
);
6354 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6355 "0527 Failed setup of fast-path FCP "
6356 "CQ (%d), rc = 0x%x\n", fcp_cqidx
, rc
);
6357 goto out_destroy_fcp_cq
;
6359 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6360 "2588 FCP CQ setup: cq[%d]-id=%d, "
6361 "parent eq[%d]-id=%d\n",
6363 phba
->sli4_hba
.fcp_cq
[fcp_cqidx
]->queue_id
,
6365 phba
->sli4_hba
.fp_eq
[fcp_cqidx
]->queue_id
);
6369 * Set up all the Work Queues (WQs)
6372 /* Set up Mailbox Command Queue */
6373 if (!phba
->sli4_hba
.mbx_wq
) {
6374 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6375 "0538 Slow-path MQ not allocated\n");
6376 goto out_destroy_fcp_cq
;
6378 rc
= lpfc_mq_create(phba
, phba
->sli4_hba
.mbx_wq
,
6379 phba
->sli4_hba
.mbx_cq
, LPFC_MBOX
);
6381 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6382 "0539 Failed setup of slow-path MQ: "
6384 goto out_destroy_fcp_cq
;
6386 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6387 "2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
6388 phba
->sli4_hba
.mbx_wq
->queue_id
,
6389 phba
->sli4_hba
.mbx_cq
->queue_id
);
6391 /* Set up slow-path ELS Work Queue */
6392 if (!phba
->sli4_hba
.els_wq
) {
6393 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6394 "0536 Slow-path ELS WQ not allocated\n");
6395 goto out_destroy_mbx_wq
;
6397 rc
= lpfc_wq_create(phba
, phba
->sli4_hba
.els_wq
,
6398 phba
->sli4_hba
.els_cq
, LPFC_ELS
);
6400 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6401 "0537 Failed setup of slow-path ELS WQ: "
6403 goto out_destroy_mbx_wq
;
6405 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6406 "2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
6407 phba
->sli4_hba
.els_wq
->queue_id
,
6408 phba
->sli4_hba
.els_cq
->queue_id
);
6410 /* Set up fast-path FCP Work Queue */
6411 for (fcp_wqidx
= 0; fcp_wqidx
< phba
->cfg_fcp_wq_count
; fcp_wqidx
++) {
6412 if (!phba
->sli4_hba
.fcp_wq
[fcp_wqidx
]) {
6413 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6414 "0534 Fast-path FCP WQ (%d) not "
6415 "allocated\n", fcp_wqidx
);
6416 goto out_destroy_fcp_wq
;
6418 rc
= lpfc_wq_create(phba
, phba
->sli4_hba
.fcp_wq
[fcp_wqidx
],
6419 phba
->sli4_hba
.fcp_cq
[fcp_cq_index
],
6422 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6423 "0535 Failed setup of fast-path FCP "
6424 "WQ (%d), rc = 0x%x\n", fcp_wqidx
, rc
);
6425 goto out_destroy_fcp_wq
;
6427 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6428 "2591 FCP WQ setup: wq[%d]-id=%d, "
6429 "parent cq[%d]-id=%d\n",
6431 phba
->sli4_hba
.fcp_wq
[fcp_wqidx
]->queue_id
,
6433 phba
->sli4_hba
.fcp_cq
[fcp_cq_index
]->queue_id
);
6434 /* Round robin FCP Work Queue's Completion Queue assignment */
6435 fcp_cq_index
= ((fcp_cq_index
+ 1) % phba
->cfg_fcp_eq_count
);
6439 * Create Receive Queue (RQ)
6441 if (!phba
->sli4_hba
.hdr_rq
|| !phba
->sli4_hba
.dat_rq
) {
6442 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6443 "0540 Receive Queue not allocated\n");
6444 goto out_destroy_fcp_wq
;
6446 rc
= lpfc_rq_create(phba
, phba
->sli4_hba
.hdr_rq
, phba
->sli4_hba
.dat_rq
,
6447 phba
->sli4_hba
.els_cq
, LPFC_USOL
);
6449 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6450 "0541 Failed setup of Receive Queue: "
6452 goto out_destroy_fcp_wq
;
6454 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
6455 "2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
6456 "parent cq-id=%d\n",
6457 phba
->sli4_hba
.hdr_rq
->queue_id
,
6458 phba
->sli4_hba
.dat_rq
->queue_id
,
6459 phba
->sli4_hba
.els_cq
->queue_id
);
6463 for (--fcp_wqidx
; fcp_wqidx
>= 0; fcp_wqidx
--)
6464 lpfc_wq_destroy(phba
, phba
->sli4_hba
.fcp_wq
[fcp_wqidx
]);
6465 lpfc_wq_destroy(phba
, phba
->sli4_hba
.els_wq
);
6467 lpfc_mq_destroy(phba
, phba
->sli4_hba
.mbx_wq
);
6469 for (--fcp_cqidx
; fcp_cqidx
>= 0; fcp_cqidx
--)
6470 lpfc_cq_destroy(phba
, phba
->sli4_hba
.fcp_cq
[fcp_cqidx
]);
6471 lpfc_cq_destroy(phba
, phba
->sli4_hba
.els_cq
);
6473 lpfc_cq_destroy(phba
, phba
->sli4_hba
.mbx_cq
);
6475 for (--fcp_eqidx
; fcp_eqidx
>= 0; fcp_eqidx
--)
6476 lpfc_eq_destroy(phba
, phba
->sli4_hba
.fp_eq
[fcp_eqidx
]);
6477 lpfc_eq_destroy(phba
, phba
->sli4_hba
.sp_eq
);
6483 * lpfc_sli4_queue_unset - Unset all the SLI4 queues
6484 * @phba: pointer to lpfc hba data structure.
6486 * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
6491 * -ENOMEM - No availble memory
6492 * -EIO - The mailbox failed to complete successfully.
6495 lpfc_sli4_queue_unset(struct lpfc_hba
*phba
)
6499 /* Unset mailbox command work queue */
6500 lpfc_mq_destroy(phba
, phba
->sli4_hba
.mbx_wq
);
6501 /* Unset ELS work queue */
6502 lpfc_wq_destroy(phba
, phba
->sli4_hba
.els_wq
);
6503 /* Unset unsolicited receive queue */
6504 lpfc_rq_destroy(phba
, phba
->sli4_hba
.hdr_rq
, phba
->sli4_hba
.dat_rq
);
6505 /* Unset FCP work queue */
6506 for (fcp_qidx
= 0; fcp_qidx
< phba
->cfg_fcp_wq_count
; fcp_qidx
++)
6507 lpfc_wq_destroy(phba
, phba
->sli4_hba
.fcp_wq
[fcp_qidx
]);
6508 /* Unset mailbox command complete queue */
6509 lpfc_cq_destroy(phba
, phba
->sli4_hba
.mbx_cq
);
6510 /* Unset ELS complete queue */
6511 lpfc_cq_destroy(phba
, phba
->sli4_hba
.els_cq
);
6512 /* Unset FCP response complete queue */
6513 for (fcp_qidx
= 0; fcp_qidx
< phba
->cfg_fcp_eq_count
; fcp_qidx
++)
6514 lpfc_cq_destroy(phba
, phba
->sli4_hba
.fcp_cq
[fcp_qidx
]);
6515 /* Unset fast-path event queue */
6516 for (fcp_qidx
= 0; fcp_qidx
< phba
->cfg_fcp_eq_count
; fcp_qidx
++)
6517 lpfc_eq_destroy(phba
, phba
->sli4_hba
.fp_eq
[fcp_qidx
]);
6518 /* Unset slow-path event queue */
6519 lpfc_eq_destroy(phba
, phba
->sli4_hba
.sp_eq
);
6523 * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
6524 * @phba: pointer to lpfc hba data structure.
6526 * This routine is invoked to allocate and set up a pool of completion queue
6527 * events. The body of the completion queue event is a completion queue entry
6528 * CQE. For now, this pool is used for the interrupt service routine to queue
6529 * the following HBA completion queue events for the worker thread to process:
6530 * - Mailbox asynchronous events
6531 * - Receive queue completion unsolicited events
6532 * Later, this can be used for all the slow-path events.
6536 * -ENOMEM - No availble memory
6539 lpfc_sli4_cq_event_pool_create(struct lpfc_hba
*phba
)
6541 struct lpfc_cq_event
*cq_event
;
6544 for (i
= 0; i
< (4 * phba
->sli4_hba
.cq_ecount
); i
++) {
6545 cq_event
= kmalloc(sizeof(struct lpfc_cq_event
), GFP_KERNEL
);
6547 goto out_pool_create_fail
;
6548 list_add_tail(&cq_event
->list
,
6549 &phba
->sli4_hba
.sp_cqe_event_pool
);
6553 out_pool_create_fail
:
6554 lpfc_sli4_cq_event_pool_destroy(phba
);
6559 * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
6560 * @phba: pointer to lpfc hba data structure.
6562 * This routine is invoked to free the pool of completion queue events at
6563 * driver unload time. Note that, it is the responsibility of the driver
6564 * cleanup routine to free all the outstanding completion-queue events
6565 * allocated from this pool back into the pool before invoking this routine
6566 * to destroy the pool.
6569 lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba
*phba
)
6571 struct lpfc_cq_event
*cq_event
, *next_cq_event
;
6573 list_for_each_entry_safe(cq_event
, next_cq_event
,
6574 &phba
->sli4_hba
.sp_cqe_event_pool
, list
) {
6575 list_del(&cq_event
->list
);
6581 * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
6582 * @phba: pointer to lpfc hba data structure.
6584 * This routine is the lock free version of the API invoked to allocate a
6585 * completion-queue event from the free pool.
6587 * Return: Pointer to the newly allocated completion-queue event if successful
6590 struct lpfc_cq_event
*
6591 __lpfc_sli4_cq_event_alloc(struct lpfc_hba
*phba
)
6593 struct lpfc_cq_event
*cq_event
= NULL
;
6595 list_remove_head(&phba
->sli4_hba
.sp_cqe_event_pool
, cq_event
,
6596 struct lpfc_cq_event
, list
);
6601 * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
6602 * @phba: pointer to lpfc hba data structure.
6604 * This routine is the lock version of the API invoked to allocate a
6605 * completion-queue event from the free pool.
6607 * Return: Pointer to the newly allocated completion-queue event if successful
6610 struct lpfc_cq_event
*
6611 lpfc_sli4_cq_event_alloc(struct lpfc_hba
*phba
)
6613 struct lpfc_cq_event
*cq_event
;
6614 unsigned long iflags
;
6616 spin_lock_irqsave(&phba
->hbalock
, iflags
);
6617 cq_event
= __lpfc_sli4_cq_event_alloc(phba
);
6618 spin_unlock_irqrestore(&phba
->hbalock
, iflags
);
6623 * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
6624 * @phba: pointer to lpfc hba data structure.
6625 * @cq_event: pointer to the completion queue event to be freed.
6627 * This routine is the lock free version of the API invoked to release a
6628 * completion-queue event back into the free pool.
6631 __lpfc_sli4_cq_event_release(struct lpfc_hba
*phba
,
6632 struct lpfc_cq_event
*cq_event
)
6634 list_add_tail(&cq_event
->list
, &phba
->sli4_hba
.sp_cqe_event_pool
);
6638 * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
6639 * @phba: pointer to lpfc hba data structure.
6640 * @cq_event: pointer to the completion queue event to be freed.
6642 * This routine is the lock version of the API invoked to release a
6643 * completion-queue event back into the free pool.
6646 lpfc_sli4_cq_event_release(struct lpfc_hba
*phba
,
6647 struct lpfc_cq_event
*cq_event
)
6649 unsigned long iflags
;
6650 spin_lock_irqsave(&phba
->hbalock
, iflags
);
6651 __lpfc_sli4_cq_event_release(phba
, cq_event
);
6652 spin_unlock_irqrestore(&phba
->hbalock
, iflags
);
6656 * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
6657 * @phba: pointer to lpfc hba data structure.
6659 * This routine is to free all the pending completion-queue events to the
6660 * back into the free pool for device reset.
6663 lpfc_sli4_cq_event_release_all(struct lpfc_hba
*phba
)
6666 struct lpfc_cq_event
*cqe
;
6667 unsigned long iflags
;
6669 /* Retrieve all the pending WCQEs from pending WCQE lists */
6670 spin_lock_irqsave(&phba
->hbalock
, iflags
);
6671 /* Pending FCP XRI abort events */
6672 list_splice_init(&phba
->sli4_hba
.sp_fcp_xri_aborted_work_queue
,
6674 /* Pending ELS XRI abort events */
6675 list_splice_init(&phba
->sli4_hba
.sp_els_xri_aborted_work_queue
,
6677 /* Pending asynnc events */
6678 list_splice_init(&phba
->sli4_hba
.sp_asynce_work_queue
,
6680 spin_unlock_irqrestore(&phba
->hbalock
, iflags
);
6682 while (!list_empty(&cqelist
)) {
6683 list_remove_head(&cqelist
, cqe
, struct lpfc_cq_event
, list
);
6684 lpfc_sli4_cq_event_release(phba
, cqe
);
6689 * lpfc_pci_function_reset - Reset pci function.
6690 * @phba: pointer to lpfc hba data structure.
6692 * This routine is invoked to request a PCI function reset. It will destroys
6693 * all resources assigned to the PCI function which originates this request.
6697 * -ENOMEM - No availble memory
6698 * -EIO - The mailbox failed to complete successfully.
6701 lpfc_pci_function_reset(struct lpfc_hba
*phba
)
6703 LPFC_MBOXQ_t
*mboxq
;
6704 uint32_t rc
= 0, if_type
;
6705 uint32_t shdr_status
, shdr_add_status
;
6706 uint32_t rdy_chk
, num_resets
= 0, reset_again
= 0;
6707 union lpfc_sli4_cfg_shdr
*shdr
;
6708 struct lpfc_register reg_data
;
6710 if_type
= bf_get(lpfc_sli_intf_if_type
, &phba
->sli4_hba
.sli_intf
);
6712 case LPFC_SLI_INTF_IF_TYPE_0
:
6713 mboxq
= (LPFC_MBOXQ_t
*) mempool_alloc(phba
->mbox_mem_pool
,
6716 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6717 "0494 Unable to allocate memory for "
6718 "issuing SLI_FUNCTION_RESET mailbox "
6723 /* Setup PCI function reset mailbox-ioctl command */
6724 lpfc_sli4_config(phba
, mboxq
, LPFC_MBOX_SUBSYSTEM_COMMON
,
6725 LPFC_MBOX_OPCODE_FUNCTION_RESET
, 0,
6726 LPFC_SLI4_MBX_EMBED
);
6727 rc
= lpfc_sli_issue_mbox(phba
, mboxq
, MBX_POLL
);
6728 shdr
= (union lpfc_sli4_cfg_shdr
*)
6729 &mboxq
->u
.mqe
.un
.sli4_config
.header
.cfg_shdr
;
6730 shdr_status
= bf_get(lpfc_mbox_hdr_status
, &shdr
->response
);
6731 shdr_add_status
= bf_get(lpfc_mbox_hdr_add_status
,
6733 if (rc
!= MBX_TIMEOUT
)
6734 mempool_free(mboxq
, phba
->mbox_mem_pool
);
6735 if (shdr_status
|| shdr_add_status
|| rc
) {
6736 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6737 "0495 SLI_FUNCTION_RESET mailbox "
6738 "failed with status x%x add_status x%x,"
6739 " mbx status x%x\n",
6740 shdr_status
, shdr_add_status
, rc
);
6744 case LPFC_SLI_INTF_IF_TYPE_2
:
6745 for (num_resets
= 0;
6746 num_resets
< MAX_IF_TYPE_2_RESETS
;
6749 bf_set(lpfc_sliport_ctrl_end
, ®_data
,
6750 LPFC_SLIPORT_LITTLE_ENDIAN
);
6751 bf_set(lpfc_sliport_ctrl_ip
, ®_data
,
6752 LPFC_SLIPORT_INIT_PORT
);
6753 writel(reg_data
.word0
, phba
->sli4_hba
.u
.if_type2
.
6757 * Poll the Port Status Register and wait for RDY for
6758 * up to 10 seconds. If the port doesn't respond, treat
6759 * it as an error. If the port responds with RN, start
6762 for (rdy_chk
= 0; rdy_chk
< 1000; rdy_chk
++) {
6764 readl(phba
->sli4_hba
.u
.if_type2
.
6766 if (bf_get(lpfc_sliport_status_rdy
, ®_data
))
6768 if (bf_get(lpfc_sliport_status_rn
, ®_data
)) {
6776 * If the port responds to the init request with
6777 * reset needed, delay for a bit and restart the loop.
6785 /* Detect any port errors. */
6786 reg_data
.word0
= readl(phba
->sli4_hba
.u
.if_type2
.
6788 if ((bf_get(lpfc_sliport_status_err
, ®_data
)) ||
6789 (rdy_chk
>= 1000)) {
6790 phba
->work_status
[0] = readl(
6791 phba
->sli4_hba
.u
.if_type2
.ERR1regaddr
);
6792 phba
->work_status
[1] = readl(
6793 phba
->sli4_hba
.u
.if_type2
.ERR2regaddr
);
6794 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6795 "2890 Port Error Detected "
6796 "during Port Reset: "
6797 "port status reg 0x%x, "
6798 "error 1=0x%x, error 2=0x%x\n",
6800 phba
->work_status
[0],
6801 phba
->work_status
[1]);
6806 * Terminate the outer loop provided the Port indicated
6807 * ready within 10 seconds.
6813 case LPFC_SLI_INTF_IF_TYPE_1
:
6818 /* Catch the not-ready port failure after a port reset. */
6819 if (num_resets
>= MAX_IF_TYPE_2_RESETS
)
6826 * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
6827 * @phba: pointer to lpfc hba data structure.
6828 * @cnt: number of nop mailbox commands to send.
6830 * This routine is invoked to send a number @cnt of NOP mailbox command and
6831 * wait for each command to complete.
6833 * Return: the number of NOP mailbox command completed.
6836 lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba
*phba
, uint32_t cnt
)
6838 LPFC_MBOXQ_t
*mboxq
;
6839 int length
, cmdsent
;
6842 uint32_t shdr_status
, shdr_add_status
;
6843 union lpfc_sli4_cfg_shdr
*shdr
;
6846 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
6847 "2518 Requested to send 0 NOP mailbox cmd\n");
6851 mboxq
= (LPFC_MBOXQ_t
*)mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
6853 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6854 "2519 Unable to allocate memory for issuing "
6855 "NOP mailbox command\n");
6859 /* Set up NOP SLI4_CONFIG mailbox-ioctl command */
6860 length
= (sizeof(struct lpfc_mbx_nop
) -
6861 sizeof(struct lpfc_sli4_cfg_mhdr
));
6862 lpfc_sli4_config(phba
, mboxq
, LPFC_MBOX_SUBSYSTEM_COMMON
,
6863 LPFC_MBOX_OPCODE_NOP
, length
, LPFC_SLI4_MBX_EMBED
);
6865 mbox_tmo
= lpfc_mbox_tmo_val(phba
, MBX_SLI4_CONFIG
);
6866 for (cmdsent
= 0; cmdsent
< cnt
; cmdsent
++) {
6867 if (!phba
->sli4_hba
.intr_enable
)
6868 rc
= lpfc_sli_issue_mbox(phba
, mboxq
, MBX_POLL
);
6870 rc
= lpfc_sli_issue_mbox_wait(phba
, mboxq
, mbox_tmo
);
6871 if (rc
== MBX_TIMEOUT
)
6873 /* Check return status */
6874 shdr
= (union lpfc_sli4_cfg_shdr
*)
6875 &mboxq
->u
.mqe
.un
.sli4_config
.header
.cfg_shdr
;
6876 shdr_status
= bf_get(lpfc_mbox_hdr_status
, &shdr
->response
);
6877 shdr_add_status
= bf_get(lpfc_mbox_hdr_add_status
,
6879 if (shdr_status
|| shdr_add_status
|| rc
) {
6880 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
6881 "2520 NOP mailbox command failed "
6882 "status x%x add_status x%x mbx "
6883 "status x%x\n", shdr_status
,
6884 shdr_add_status
, rc
);
6889 if (rc
!= MBX_TIMEOUT
)
6890 mempool_free(mboxq
, phba
->mbox_mem_pool
);
6896 * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
6897 * @phba: pointer to lpfc hba data structure.
6899 * This routine is invoked to set up the PCI device memory space for device
6900 * with SLI-4 interface spec.
6904 * other values - error
6907 lpfc_sli4_pci_mem_setup(struct lpfc_hba
*phba
)
6909 struct pci_dev
*pdev
;
6910 unsigned long bar0map_len
, bar1map_len
, bar2map_len
;
6911 int error
= -ENODEV
;
6914 /* Obtain PCI device reference */
6918 pdev
= phba
->pcidev
;
6920 /* Set the device DMA mask size */
6921 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(64)) != 0
6922 || pci_set_consistent_dma_mask(pdev
,DMA_BIT_MASK(64)) != 0) {
6923 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(32)) != 0
6924 || pci_set_consistent_dma_mask(pdev
,DMA_BIT_MASK(32)) != 0) {
6930 * The BARs and register set definitions and offset locations are
6931 * dependent on the if_type.
6933 if (pci_read_config_dword(pdev
, LPFC_SLI_INTF
,
6934 &phba
->sli4_hba
.sli_intf
.word0
)) {
6938 /* There is no SLI3 failback for SLI4 devices. */
6939 if (bf_get(lpfc_sli_intf_valid
, &phba
->sli4_hba
.sli_intf
) !=
6940 LPFC_SLI_INTF_VALID
) {
6941 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6942 "2894 SLI_INTF reg contents invalid "
6943 "sli_intf reg 0x%x\n",
6944 phba
->sli4_hba
.sli_intf
.word0
);
6948 if_type
= bf_get(lpfc_sli_intf_if_type
, &phba
->sli4_hba
.sli_intf
);
6950 * Get the bus address of SLI4 device Bar regions and the
6951 * number of bytes required by each mapping. The mapping of the
6952 * particular PCI BARs regions is dependent on the type of
6955 if (pci_resource_start(pdev
, 0)) {
6956 phba
->pci_bar0_map
= pci_resource_start(pdev
, 0);
6957 bar0map_len
= pci_resource_len(pdev
, 0);
6960 * Map SLI4 PCI Config Space Register base to a kernel virtual
6963 phba
->sli4_hba
.conf_regs_memmap_p
=
6964 ioremap(phba
->pci_bar0_map
, bar0map_len
);
6965 if (!phba
->sli4_hba
.conf_regs_memmap_p
) {
6966 dev_printk(KERN_ERR
, &pdev
->dev
,
6967 "ioremap failed for SLI4 PCI config "
6971 /* Set up BAR0 PCI config space register memory map */
6972 lpfc_sli4_bar0_register_memmap(phba
, if_type
);
6974 phba
->pci_bar0_map
= pci_resource_start(pdev
, 1);
6975 bar0map_len
= pci_resource_len(pdev
, 1);
6976 if (if_type
== LPFC_SLI_INTF_IF_TYPE_2
) {
6977 dev_printk(KERN_ERR
, &pdev
->dev
,
6978 "FATAL - No BAR0 mapping for SLI4, if_type 2\n");
6981 phba
->sli4_hba
.conf_regs_memmap_p
=
6982 ioremap(phba
->pci_bar0_map
, bar0map_len
);
6983 if (!phba
->sli4_hba
.conf_regs_memmap_p
) {
6984 dev_printk(KERN_ERR
, &pdev
->dev
,
6985 "ioremap failed for SLI4 PCI config "
6989 lpfc_sli4_bar0_register_memmap(phba
, if_type
);
6992 if (pci_resource_start(pdev
, 2)) {
6994 * Map SLI4 if type 0 HBA Control Register base to a kernel
6995 * virtual address and setup the registers.
6997 phba
->pci_bar1_map
= pci_resource_start(pdev
, 2);
6998 bar1map_len
= pci_resource_len(pdev
, 2);
6999 phba
->sli4_hba
.ctrl_regs_memmap_p
=
7000 ioremap(phba
->pci_bar1_map
, bar1map_len
);
7001 if (!phba
->sli4_hba
.ctrl_regs_memmap_p
) {
7002 dev_printk(KERN_ERR
, &pdev
->dev
,
7003 "ioremap failed for SLI4 HBA control registers.\n");
7004 goto out_iounmap_conf
;
7006 lpfc_sli4_bar1_register_memmap(phba
);
7009 if (pci_resource_start(pdev
, 4)) {
7011 * Map SLI4 if type 0 HBA Doorbell Register base to a kernel
7012 * virtual address and setup the registers.
7014 phba
->pci_bar2_map
= pci_resource_start(pdev
, 4);
7015 bar2map_len
= pci_resource_len(pdev
, 4);
7016 phba
->sli4_hba
.drbl_regs_memmap_p
=
7017 ioremap(phba
->pci_bar2_map
, bar2map_len
);
7018 if (!phba
->sli4_hba
.drbl_regs_memmap_p
) {
7019 dev_printk(KERN_ERR
, &pdev
->dev
,
7020 "ioremap failed for SLI4 HBA doorbell registers.\n");
7021 goto out_iounmap_ctrl
;
7023 error
= lpfc_sli4_bar2_register_memmap(phba
, LPFC_VF0
);
7025 goto out_iounmap_all
;
7031 iounmap(phba
->sli4_hba
.drbl_regs_memmap_p
);
7033 iounmap(phba
->sli4_hba
.ctrl_regs_memmap_p
);
7035 iounmap(phba
->sli4_hba
.conf_regs_memmap_p
);
7041 * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
7042 * @phba: pointer to lpfc hba data structure.
7044 * This routine is invoked to unset the PCI device memory space for device
7045 * with SLI-4 interface spec.
7048 lpfc_sli4_pci_mem_unset(struct lpfc_hba
*phba
)
7050 struct pci_dev
*pdev
;
7052 /* Obtain PCI device reference */
7056 pdev
= phba
->pcidev
;
7058 /* Free coherent DMA memory allocated */
7060 /* Unmap I/O memory space */
7061 iounmap(phba
->sli4_hba
.drbl_regs_memmap_p
);
7062 iounmap(phba
->sli4_hba
.ctrl_regs_memmap_p
);
7063 iounmap(phba
->sli4_hba
.conf_regs_memmap_p
);
7069 * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
7070 * @phba: pointer to lpfc hba data structure.
7072 * This routine is invoked to enable the MSI-X interrupt vectors to device
7073 * with SLI-3 interface specs. The kernel function pci_enable_msix() is
7074 * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
7075 * invoked, enables either all or nothing, depending on the current
7076 * availability of PCI vector resources. The device driver is responsible
7077 * for calling the individual request_irq() to register each MSI-X vector
7078 * with a interrupt handler, which is done in this function. Note that
7079 * later when device is unloading, the driver should always call free_irq()
7080 * on all MSI-X vectors it has done request_irq() on before calling
7081 * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
7082 * will be left with MSI-X enabled and leaks its vectors.
7086 * other values - error
7089 lpfc_sli_enable_msix(struct lpfc_hba
*phba
)
7094 /* Set up MSI-X multi-message vectors */
7095 for (i
= 0; i
< LPFC_MSIX_VECTORS
; i
++)
7096 phba
->msix_entries
[i
].entry
= i
;
7098 /* Configure MSI-X capability structure */
7099 rc
= pci_enable_msix(phba
->pcidev
, phba
->msix_entries
,
7100 ARRAY_SIZE(phba
->msix_entries
));
7102 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
7103 "0420 PCI enable MSI-X failed (%d)\n", rc
);
7106 for (i
= 0; i
< LPFC_MSIX_VECTORS
; i
++)
7107 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
7108 "0477 MSI-X entry[%d]: vector=x%x "
7110 phba
->msix_entries
[i
].vector
,
7111 phba
->msix_entries
[i
].entry
);
7113 * Assign MSI-X vectors to interrupt handlers
7116 /* vector-0 is associated to slow-path handler */
7117 rc
= request_irq(phba
->msix_entries
[0].vector
,
7118 &lpfc_sli_sp_intr_handler
, IRQF_SHARED
,
7119 LPFC_SP_DRIVER_HANDLER_NAME
, phba
);
7121 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
7122 "0421 MSI-X slow-path request_irq failed "
7127 /* vector-1 is associated to fast-path handler */
7128 rc
= request_irq(phba
->msix_entries
[1].vector
,
7129 &lpfc_sli_fp_intr_handler
, IRQF_SHARED
,
7130 LPFC_FP_DRIVER_HANDLER_NAME
, phba
);
7133 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
7134 "0429 MSI-X fast-path request_irq failed "
7140 * Configure HBA MSI-X attention conditions to messages
7142 pmb
= (LPFC_MBOXQ_t
*) mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
7146 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
7147 "0474 Unable to allocate memory for issuing "
7148 "MBOX_CONFIG_MSI command\n");
7151 rc
= lpfc_config_msi(phba
, pmb
);
7154 rc
= lpfc_sli_issue_mbox(phba
, pmb
, MBX_POLL
);
7155 if (rc
!= MBX_SUCCESS
) {
7156 lpfc_printf_log(phba
, KERN_WARNING
, LOG_MBOX
,
7157 "0351 Config MSI mailbox command failed, "
7158 "mbxCmd x%x, mbxStatus x%x\n",
7159 pmb
->u
.mb
.mbxCommand
, pmb
->u
.mb
.mbxStatus
);
7163 /* Free memory allocated for mailbox command */
7164 mempool_free(pmb
, phba
->mbox_mem_pool
);
7168 /* Free memory allocated for mailbox command */
7169 mempool_free(pmb
, phba
->mbox_mem_pool
);
7172 /* free the irq already requested */
7173 free_irq(phba
->msix_entries
[1].vector
, phba
);
7176 /* free the irq already requested */
7177 free_irq(phba
->msix_entries
[0].vector
, phba
);
7180 /* Unconfigure MSI-X capability structure */
7181 pci_disable_msix(phba
->pcidev
);
7186 * lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
7187 * @phba: pointer to lpfc hba data structure.
7189 * This routine is invoked to release the MSI-X vectors and then disable the
7190 * MSI-X interrupt mode to device with SLI-3 interface spec.
7193 lpfc_sli_disable_msix(struct lpfc_hba
*phba
)
7197 /* Free up MSI-X multi-message vectors */
7198 for (i
= 0; i
< LPFC_MSIX_VECTORS
; i
++)
7199 free_irq(phba
->msix_entries
[i
].vector
, phba
);
7201 pci_disable_msix(phba
->pcidev
);
7207 * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
7208 * @phba: pointer to lpfc hba data structure.
7210 * This routine is invoked to enable the MSI interrupt mode to device with
7211 * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
7212 * enable the MSI vector. The device driver is responsible for calling the
7213 * request_irq() to register MSI vector with a interrupt the handler, which
7214 * is done in this function.
7218 * other values - error
7221 lpfc_sli_enable_msi(struct lpfc_hba
*phba
)
7225 rc
= pci_enable_msi(phba
->pcidev
);
7227 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
7228 "0462 PCI enable MSI mode success.\n");
7230 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
7231 "0471 PCI enable MSI mode failed (%d)\n", rc
);
7235 rc
= request_irq(phba
->pcidev
->irq
, lpfc_sli_intr_handler
,
7236 IRQF_SHARED
, LPFC_DRIVER_NAME
, phba
);
7238 pci_disable_msi(phba
->pcidev
);
7239 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
7240 "0478 MSI request_irq failed (%d)\n", rc
);
7246 * lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
7247 * @phba: pointer to lpfc hba data structure.
7249 * This routine is invoked to disable the MSI interrupt mode to device with
7250 * SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
7251 * done request_irq() on before calling pci_disable_msi(). Failure to do so
7252 * results in a BUG_ON() and a device will be left with MSI enabled and leaks
7256 lpfc_sli_disable_msi(struct lpfc_hba
*phba
)
7258 free_irq(phba
->pcidev
->irq
, phba
);
7259 pci_disable_msi(phba
->pcidev
);
7264 * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
7265 * @phba: pointer to lpfc hba data structure.
7267 * This routine is invoked to enable device interrupt and associate driver's
7268 * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
7269 * spec. Depends on the interrupt mode configured to the driver, the driver
7270 * will try to fallback from the configured interrupt mode to an interrupt
7271 * mode which is supported by the platform, kernel, and device in the order
7273 * MSI-X -> MSI -> IRQ.
7277 * other values - error
7280 lpfc_sli_enable_intr(struct lpfc_hba
*phba
, uint32_t cfg_mode
)
7282 uint32_t intr_mode
= LPFC_INTR_ERROR
;
7285 if (cfg_mode
== 2) {
7286 /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
7287 retval
= lpfc_sli_config_port(phba
, LPFC_SLI_REV3
);
7289 /* Now, try to enable MSI-X interrupt mode */
7290 retval
= lpfc_sli_enable_msix(phba
);
7292 /* Indicate initialization to MSI-X mode */
7293 phba
->intr_type
= MSIX
;
7299 /* Fallback to MSI if MSI-X initialization failed */
7300 if (cfg_mode
>= 1 && phba
->intr_type
== NONE
) {
7301 retval
= lpfc_sli_enable_msi(phba
);
7303 /* Indicate initialization to MSI mode */
7304 phba
->intr_type
= MSI
;
7309 /* Fallback to INTx if both MSI-X/MSI initalization failed */
7310 if (phba
->intr_type
== NONE
) {
7311 retval
= request_irq(phba
->pcidev
->irq
, lpfc_sli_intr_handler
,
7312 IRQF_SHARED
, LPFC_DRIVER_NAME
, phba
);
7314 /* Indicate initialization to INTx mode */
7315 phba
->intr_type
= INTx
;
7323 * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
7324 * @phba: pointer to lpfc hba data structure.
7326 * This routine is invoked to disable device interrupt and disassociate the
7327 * driver's interrupt handler(s) from interrupt vector(s) to device with
7328 * SLI-3 interface spec. Depending on the interrupt mode, the driver will
7329 * release the interrupt vector(s) for the message signaled interrupt.
7332 lpfc_sli_disable_intr(struct lpfc_hba
*phba
)
7334 /* Disable the currently initialized interrupt mode */
7335 if (phba
->intr_type
== MSIX
)
7336 lpfc_sli_disable_msix(phba
);
7337 else if (phba
->intr_type
== MSI
)
7338 lpfc_sli_disable_msi(phba
);
7339 else if (phba
->intr_type
== INTx
)
7340 free_irq(phba
->pcidev
->irq
, phba
);
7342 /* Reset interrupt management states */
7343 phba
->intr_type
= NONE
;
7344 phba
->sli
.slistat
.sli_intr
= 0;
7350 * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
7351 * @phba: pointer to lpfc hba data structure.
7353 * This routine is invoked to enable the MSI-X interrupt vectors to device
7354 * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
7355 * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
7356 * enables either all or nothing, depending on the current availability of
7357 * PCI vector resources. The device driver is responsible for calling the
7358 * individual request_irq() to register each MSI-X vector with a interrupt
7359 * handler, which is done in this function. Note that later when device is
7360 * unloading, the driver should always call free_irq() on all MSI-X vectors
7361 * it has done request_irq() on before calling pci_disable_msix(). Failure
7362 * to do so results in a BUG_ON() and a device will be left with MSI-X
7363 * enabled and leaks its vectors.
7367 * other values - error
7370 lpfc_sli4_enable_msix(struct lpfc_hba
*phba
)
7372 int vectors
, rc
, index
;
7374 /* Set up MSI-X multi-message vectors */
7375 for (index
= 0; index
< phba
->sli4_hba
.cfg_eqn
; index
++)
7376 phba
->sli4_hba
.msix_entries
[index
].entry
= index
;
7378 /* Configure MSI-X capability structure */
7379 vectors
= phba
->sli4_hba
.cfg_eqn
;
7380 enable_msix_vectors
:
7381 rc
= pci_enable_msix(phba
->pcidev
, phba
->sli4_hba
.msix_entries
,
7385 goto enable_msix_vectors
;
7387 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
7388 "0484 PCI enable MSI-X failed (%d)\n", rc
);
7392 /* Log MSI-X vector assignment */
7393 for (index
= 0; index
< vectors
; index
++)
7394 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
7395 "0489 MSI-X entry[%d]: vector=x%x "
7396 "message=%d\n", index
,
7397 phba
->sli4_hba
.msix_entries
[index
].vector
,
7398 phba
->sli4_hba
.msix_entries
[index
].entry
);
7400 * Assign MSI-X vectors to interrupt handlers
7403 /* The first vector must associated to slow-path handler for MQ */
7404 rc
= request_irq(phba
->sli4_hba
.msix_entries
[0].vector
,
7405 &lpfc_sli4_sp_intr_handler
, IRQF_SHARED
,
7406 LPFC_SP_DRIVER_HANDLER_NAME
, phba
);
7408 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
7409 "0485 MSI-X slow-path request_irq failed "
7414 /* The rest of the vector(s) are associated to fast-path handler(s) */
7415 for (index
= 1; index
< vectors
; index
++) {
7416 phba
->sli4_hba
.fcp_eq_hdl
[index
- 1].idx
= index
- 1;
7417 phba
->sli4_hba
.fcp_eq_hdl
[index
- 1].phba
= phba
;
7418 rc
= request_irq(phba
->sli4_hba
.msix_entries
[index
].vector
,
7419 &lpfc_sli4_fp_intr_handler
, IRQF_SHARED
,
7420 LPFC_FP_DRIVER_HANDLER_NAME
,
7421 &phba
->sli4_hba
.fcp_eq_hdl
[index
- 1]);
7423 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
7424 "0486 MSI-X fast-path (%d) "
7425 "request_irq failed (%d)\n", index
, rc
);
7429 phba
->sli4_hba
.msix_vec_nr
= vectors
;
7434 /* free the irq already requested */
7435 for (--index
; index
>= 1; index
--)
7436 free_irq(phba
->sli4_hba
.msix_entries
[index
- 1].vector
,
7437 &phba
->sli4_hba
.fcp_eq_hdl
[index
- 1]);
7439 /* free the irq already requested */
7440 free_irq(phba
->sli4_hba
.msix_entries
[0].vector
, phba
);
7443 /* Unconfigure MSI-X capability structure */
7444 pci_disable_msix(phba
->pcidev
);
7449 * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
7450 * @phba: pointer to lpfc hba data structure.
7452 * This routine is invoked to release the MSI-X vectors and then disable the
7453 * MSI-X interrupt mode to device with SLI-4 interface spec.
7456 lpfc_sli4_disable_msix(struct lpfc_hba
*phba
)
7460 /* Free up MSI-X multi-message vectors */
7461 free_irq(phba
->sli4_hba
.msix_entries
[0].vector
, phba
);
7463 for (index
= 1; index
< phba
->sli4_hba
.msix_vec_nr
; index
++)
7464 free_irq(phba
->sli4_hba
.msix_entries
[index
].vector
,
7465 &phba
->sli4_hba
.fcp_eq_hdl
[index
- 1]);
7468 pci_disable_msix(phba
->pcidev
);
7474 * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
7475 * @phba: pointer to lpfc hba data structure.
7477 * This routine is invoked to enable the MSI interrupt mode to device with
7478 * SLI-4 interface spec. The kernel function pci_enable_msi() is called
7479 * to enable the MSI vector. The device driver is responsible for calling
7480 * the request_irq() to register MSI vector with a interrupt the handler,
7481 * which is done in this function.
7485 * other values - error
7488 lpfc_sli4_enable_msi(struct lpfc_hba
*phba
)
7492 rc
= pci_enable_msi(phba
->pcidev
);
7494 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
7495 "0487 PCI enable MSI mode success.\n");
7497 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
7498 "0488 PCI enable MSI mode failed (%d)\n", rc
);
7502 rc
= request_irq(phba
->pcidev
->irq
, lpfc_sli4_intr_handler
,
7503 IRQF_SHARED
, LPFC_DRIVER_NAME
, phba
);
7505 pci_disable_msi(phba
->pcidev
);
7506 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
7507 "0490 MSI request_irq failed (%d)\n", rc
);
7511 for (index
= 0; index
< phba
->cfg_fcp_eq_count
; index
++) {
7512 phba
->sli4_hba
.fcp_eq_hdl
[index
].idx
= index
;
7513 phba
->sli4_hba
.fcp_eq_hdl
[index
].phba
= phba
;
7520 * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
7521 * @phba: pointer to lpfc hba data structure.
7523 * This routine is invoked to disable the MSI interrupt mode to device with
7524 * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
7525 * done request_irq() on before calling pci_disable_msi(). Failure to do so
7526 * results in a BUG_ON() and a device will be left with MSI enabled and leaks
7530 lpfc_sli4_disable_msi(struct lpfc_hba
*phba
)
7532 free_irq(phba
->pcidev
->irq
, phba
);
7533 pci_disable_msi(phba
->pcidev
);
7538 * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
7539 * @phba: pointer to lpfc hba data structure.
7541 * This routine is invoked to enable device interrupt and associate driver's
7542 * interrupt handler(s) to interrupt vector(s) to device with SLI-4
7543 * interface spec. Depends on the interrupt mode configured to the driver,
7544 * the driver will try to fallback from the configured interrupt mode to an
7545 * interrupt mode which is supported by the platform, kernel, and device in
7547 * MSI-X -> MSI -> IRQ.
7551 * other values - error
7554 lpfc_sli4_enable_intr(struct lpfc_hba
*phba
, uint32_t cfg_mode
)
7556 uint32_t intr_mode
= LPFC_INTR_ERROR
;
7559 if (cfg_mode
== 2) {
7560 /* Preparation before conf_msi mbox cmd */
7563 /* Now, try to enable MSI-X interrupt mode */
7564 retval
= lpfc_sli4_enable_msix(phba
);
7566 /* Indicate initialization to MSI-X mode */
7567 phba
->intr_type
= MSIX
;
7573 /* Fallback to MSI if MSI-X initialization failed */
7574 if (cfg_mode
>= 1 && phba
->intr_type
== NONE
) {
7575 retval
= lpfc_sli4_enable_msi(phba
);
7577 /* Indicate initialization to MSI mode */
7578 phba
->intr_type
= MSI
;
7583 /* Fallback to INTx if both MSI-X/MSI initalization failed */
7584 if (phba
->intr_type
== NONE
) {
7585 retval
= request_irq(phba
->pcidev
->irq
, lpfc_sli4_intr_handler
,
7586 IRQF_SHARED
, LPFC_DRIVER_NAME
, phba
);
7588 /* Indicate initialization to INTx mode */
7589 phba
->intr_type
= INTx
;
7591 for (index
= 0; index
< phba
->cfg_fcp_eq_count
;
7593 phba
->sli4_hba
.fcp_eq_hdl
[index
].idx
= index
;
7594 phba
->sli4_hba
.fcp_eq_hdl
[index
].phba
= phba
;
7602 * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
7603 * @phba: pointer to lpfc hba data structure.
7605 * This routine is invoked to disable device interrupt and disassociate
7606 * the driver's interrupt handler(s) from interrupt vector(s) to device
7607 * with SLI-4 interface spec. Depending on the interrupt mode, the driver
7608 * will release the interrupt vector(s) for the message signaled interrupt.
7611 lpfc_sli4_disable_intr(struct lpfc_hba
*phba
)
7613 /* Disable the currently initialized interrupt mode */
7614 if (phba
->intr_type
== MSIX
)
7615 lpfc_sli4_disable_msix(phba
);
7616 else if (phba
->intr_type
== MSI
)
7617 lpfc_sli4_disable_msi(phba
);
7618 else if (phba
->intr_type
== INTx
)
7619 free_irq(phba
->pcidev
->irq
, phba
);
7621 /* Reset interrupt management states */
7622 phba
->intr_type
= NONE
;
7623 phba
->sli
.slistat
.sli_intr
= 0;
7629 * lpfc_unset_hba - Unset SLI3 hba device initialization
7630 * @phba: pointer to lpfc hba data structure.
7632 * This routine is invoked to unset the HBA device initialization steps to
7633 * a device with SLI-3 interface spec.
7636 lpfc_unset_hba(struct lpfc_hba
*phba
)
7638 struct lpfc_vport
*vport
= phba
->pport
;
7639 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
7641 spin_lock_irq(shost
->host_lock
);
7642 vport
->load_flag
|= FC_UNLOADING
;
7643 spin_unlock_irq(shost
->host_lock
);
7645 lpfc_stop_hba_timers(phba
);
7647 phba
->pport
->work_port_events
= 0;
7649 lpfc_sli_hba_down(phba
);
7651 lpfc_sli_brdrestart(phba
);
7653 lpfc_sli_disable_intr(phba
);
7659 * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
7660 * @phba: pointer to lpfc hba data structure.
7662 * This routine is invoked to unset the HBA device initialization steps to
7663 * a device with SLI-4 interface spec.
7666 lpfc_sli4_unset_hba(struct lpfc_hba
*phba
)
7668 struct lpfc_vport
*vport
= phba
->pport
;
7669 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
7671 spin_lock_irq(shost
->host_lock
);
7672 vport
->load_flag
|= FC_UNLOADING
;
7673 spin_unlock_irq(shost
->host_lock
);
7675 phba
->pport
->work_port_events
= 0;
7677 /* Stop the SLI4 device port */
7678 lpfc_stop_port(phba
);
7680 lpfc_sli4_disable_intr(phba
);
7682 /* Reset SLI4 HBA FCoE function */
7683 lpfc_pci_function_reset(phba
);
7689 * lpfc_sli4_xri_exchange_busy_wait - Wait for device XRI exchange busy
7690 * @phba: Pointer to HBA context object.
7692 * This function is called in the SLI4 code path to wait for completion
7693 * of device's XRIs exchange busy. It will check the XRI exchange busy
7694 * on outstanding FCP and ELS I/Os every 10ms for up to 10 seconds; after
7695 * that, it will check the XRI exchange busy on outstanding FCP and ELS
7696 * I/Os every 30 seconds, log error message, and wait forever. Only when
7697 * all XRI exchange busy complete, the driver unload shall proceed with
7698 * invoking the function reset ioctl mailbox command to the CNA and the
7699 * the rest of the driver unload resource release.
7702 lpfc_sli4_xri_exchange_busy_wait(struct lpfc_hba
*phba
)
7705 int fcp_xri_cmpl
= list_empty(&phba
->sli4_hba
.lpfc_abts_scsi_buf_list
);
7706 int els_xri_cmpl
= list_empty(&phba
->sli4_hba
.lpfc_abts_els_sgl_list
);
7708 while (!fcp_xri_cmpl
|| !els_xri_cmpl
) {
7709 if (wait_time
> LPFC_XRI_EXCH_BUSY_WAIT_TMO
) {
7711 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
7712 "2877 FCP XRI exchange busy "
7713 "wait time: %d seconds.\n",
7716 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
7717 "2878 ELS XRI exchange busy "
7718 "wait time: %d seconds.\n",
7720 msleep(LPFC_XRI_EXCH_BUSY_WAIT_T2
);
7721 wait_time
+= LPFC_XRI_EXCH_BUSY_WAIT_T2
;
7723 msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1
);
7724 wait_time
+= LPFC_XRI_EXCH_BUSY_WAIT_T1
;
7727 list_empty(&phba
->sli4_hba
.lpfc_abts_scsi_buf_list
);
7729 list_empty(&phba
->sli4_hba
.lpfc_abts_els_sgl_list
);
7734 * lpfc_sli4_hba_unset - Unset the fcoe hba
7735 * @phba: Pointer to HBA context object.
7737 * This function is called in the SLI4 code path to reset the HBA's FCoE
7738 * function. The caller is not required to hold any lock. This routine
7739 * issues PCI function reset mailbox command to reset the FCoE function.
7740 * At the end of the function, it calls lpfc_hba_down_post function to
7741 * free any pending commands.
7744 lpfc_sli4_hba_unset(struct lpfc_hba
*phba
)
7747 LPFC_MBOXQ_t
*mboxq
;
7749 lpfc_stop_hba_timers(phba
);
7750 phba
->sli4_hba
.intr_enable
= 0;
7753 * Gracefully wait out the potential current outstanding asynchronous
7757 /* First, block any pending async mailbox command from posted */
7758 spin_lock_irq(&phba
->hbalock
);
7759 phba
->sli
.sli_flag
|= LPFC_SLI_ASYNC_MBX_BLK
;
7760 spin_unlock_irq(&phba
->hbalock
);
7761 /* Now, trying to wait it out if we can */
7762 while (phba
->sli
.sli_flag
& LPFC_SLI_MBOX_ACTIVE
) {
7764 if (++wait_cnt
> LPFC_ACTIVE_MBOX_WAIT_CNT
)
7767 /* Forcefully release the outstanding mailbox command if timed out */
7768 if (phba
->sli
.sli_flag
& LPFC_SLI_MBOX_ACTIVE
) {
7769 spin_lock_irq(&phba
->hbalock
);
7770 mboxq
= phba
->sli
.mbox_active
;
7771 mboxq
->u
.mb
.mbxStatus
= MBX_NOT_FINISHED
;
7772 __lpfc_mbox_cmpl_put(phba
, mboxq
);
7773 phba
->sli
.sli_flag
&= ~LPFC_SLI_MBOX_ACTIVE
;
7774 phba
->sli
.mbox_active
= NULL
;
7775 spin_unlock_irq(&phba
->hbalock
);
7778 /* Abort all iocbs associated with the hba */
7779 lpfc_sli_hba_iocb_abort(phba
);
7781 /* Wait for completion of device XRI exchange busy */
7782 lpfc_sli4_xri_exchange_busy_wait(phba
);
7784 /* Disable PCI subsystem interrupt */
7785 lpfc_sli4_disable_intr(phba
);
7787 /* Stop kthread signal shall trigger work_done one more time */
7788 kthread_stop(phba
->worker_thread
);
7790 /* Reset SLI4 HBA FCoE function */
7791 lpfc_pci_function_reset(phba
);
7793 /* Stop the SLI4 device port */
7794 phba
->pport
->work_port_events
= 0;
7798 * lpfc_pc_sli4_params_get - Get the SLI4_PARAMS port capabilities.
7799 * @phba: Pointer to HBA context object.
7800 * @mboxq: Pointer to the mailboxq memory for the mailbox command response.
7802 * This function is called in the SLI4 code path to read the port's
7803 * sli4 capabilities.
7805 * This function may be be called from any context that can block-wait
7806 * for the completion. The expectation is that this routine is called
7807 * typically from probe_one or from the online routine.
7810 lpfc_pc_sli4_params_get(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
7813 struct lpfc_mqe
*mqe
;
7814 struct lpfc_pc_sli4_params
*sli4_params
;
7818 mqe
= &mboxq
->u
.mqe
;
7820 /* Read the port's SLI4 Parameters port capabilities */
7821 lpfc_pc_sli4_params(mboxq
);
7822 if (!phba
->sli4_hba
.intr_enable
)
7823 rc
= lpfc_sli_issue_mbox(phba
, mboxq
, MBX_POLL
);
7825 mbox_tmo
= lpfc_mbox_tmo_val(phba
, MBX_PORT_CAPABILITIES
);
7826 rc
= lpfc_sli_issue_mbox_wait(phba
, mboxq
, mbox_tmo
);
7832 sli4_params
= &phba
->sli4_hba
.pc_sli4_params
;
7833 sli4_params
->if_type
= bf_get(if_type
, &mqe
->un
.sli4_params
);
7834 sli4_params
->sli_rev
= bf_get(sli_rev
, &mqe
->un
.sli4_params
);
7835 sli4_params
->sli_family
= bf_get(sli_family
, &mqe
->un
.sli4_params
);
7836 sli4_params
->featurelevel_1
= bf_get(featurelevel_1
,
7837 &mqe
->un
.sli4_params
);
7838 sli4_params
->featurelevel_2
= bf_get(featurelevel_2
,
7839 &mqe
->un
.sli4_params
);
7840 sli4_params
->proto_types
= mqe
->un
.sli4_params
.word3
;
7841 sli4_params
->sge_supp_len
= mqe
->un
.sli4_params
.sge_supp_len
;
7842 sli4_params
->if_page_sz
= bf_get(if_page_sz
, &mqe
->un
.sli4_params
);
7843 sli4_params
->rq_db_window
= bf_get(rq_db_window
, &mqe
->un
.sli4_params
);
7844 sli4_params
->loopbk_scope
= bf_get(loopbk_scope
, &mqe
->un
.sli4_params
);
7845 sli4_params
->eq_pages_max
= bf_get(eq_pages
, &mqe
->un
.sli4_params
);
7846 sli4_params
->eqe_size
= bf_get(eqe_size
, &mqe
->un
.sli4_params
);
7847 sli4_params
->cq_pages_max
= bf_get(cq_pages
, &mqe
->un
.sli4_params
);
7848 sli4_params
->cqe_size
= bf_get(cqe_size
, &mqe
->un
.sli4_params
);
7849 sli4_params
->mq_pages_max
= bf_get(mq_pages
, &mqe
->un
.sli4_params
);
7850 sli4_params
->mqe_size
= bf_get(mqe_size
, &mqe
->un
.sli4_params
);
7851 sli4_params
->mq_elem_cnt
= bf_get(mq_elem_cnt
, &mqe
->un
.sli4_params
);
7852 sli4_params
->wq_pages_max
= bf_get(wq_pages
, &mqe
->un
.sli4_params
);
7853 sli4_params
->wqe_size
= bf_get(wqe_size
, &mqe
->un
.sli4_params
);
7854 sli4_params
->rq_pages_max
= bf_get(rq_pages
, &mqe
->un
.sli4_params
);
7855 sli4_params
->rqe_size
= bf_get(rqe_size
, &mqe
->un
.sli4_params
);
7856 sli4_params
->hdr_pages_max
= bf_get(hdr_pages
, &mqe
->un
.sli4_params
);
7857 sli4_params
->hdr_size
= bf_get(hdr_size
, &mqe
->un
.sli4_params
);
7858 sli4_params
->hdr_pp_align
= bf_get(hdr_pp_align
, &mqe
->un
.sli4_params
);
7859 sli4_params
->sgl_pages_max
= bf_get(sgl_pages
, &mqe
->un
.sli4_params
);
7860 sli4_params
->sgl_pp_align
= bf_get(sgl_pp_align
, &mqe
->un
.sli4_params
);
7865 * lpfc_get_sli4_parameters - Get the SLI4 Config PARAMETERS.
7866 * @phba: Pointer to HBA context object.
7867 * @mboxq: Pointer to the mailboxq memory for the mailbox command response.
7869 * This function is called in the SLI4 code path to read the port's
7870 * sli4 capabilities.
7872 * This function may be be called from any context that can block-wait
7873 * for the completion. The expectation is that this routine is called
7874 * typically from probe_one or from the online routine.
7877 lpfc_get_sli4_parameters(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
7880 struct lpfc_mqe
*mqe
= &mboxq
->u
.mqe
;
7881 struct lpfc_pc_sli4_params
*sli4_params
;
7883 struct lpfc_sli4_parameters
*mbx_sli4_parameters
;
7885 /* Read the port's SLI4 Config Parameters */
7886 length
= (sizeof(struct lpfc_mbx_get_sli4_parameters
) -
7887 sizeof(struct lpfc_sli4_cfg_mhdr
));
7888 lpfc_sli4_config(phba
, mboxq
, LPFC_MBOX_SUBSYSTEM_COMMON
,
7889 LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS
,
7890 length
, LPFC_SLI4_MBX_EMBED
);
7891 if (!phba
->sli4_hba
.intr_enable
)
7892 rc
= lpfc_sli_issue_mbox(phba
, mboxq
, MBX_POLL
);
7894 rc
= lpfc_sli_issue_mbox_wait(phba
, mboxq
,
7895 lpfc_mbox_tmo_val(phba
, MBX_SLI4_CONFIG
));
7898 sli4_params
= &phba
->sli4_hba
.pc_sli4_params
;
7899 mbx_sli4_parameters
= &mqe
->un
.get_sli4_parameters
.sli4_parameters
;
7900 sli4_params
->if_type
= bf_get(cfg_if_type
, mbx_sli4_parameters
);
7901 sli4_params
->sli_rev
= bf_get(cfg_sli_rev
, mbx_sli4_parameters
);
7902 sli4_params
->sli_family
= bf_get(cfg_sli_family
, mbx_sli4_parameters
);
7903 sli4_params
->featurelevel_1
= bf_get(cfg_sli_hint_1
,
7904 mbx_sli4_parameters
);
7905 sli4_params
->featurelevel_2
= bf_get(cfg_sli_hint_2
,
7906 mbx_sli4_parameters
);
7907 if (bf_get(cfg_phwq
, mbx_sli4_parameters
))
7908 phba
->sli3_options
|= LPFC_SLI4_PHWQ_ENABLED
;
7910 phba
->sli3_options
&= ~LPFC_SLI4_PHWQ_ENABLED
;
7911 sli4_params
->sge_supp_len
= mbx_sli4_parameters
->sge_supp_len
;
7912 sli4_params
->loopbk_scope
= bf_get(loopbk_scope
, mbx_sli4_parameters
);
7913 sli4_params
->cqv
= bf_get(cfg_cqv
, mbx_sli4_parameters
);
7914 sli4_params
->mqv
= bf_get(cfg_mqv
, mbx_sli4_parameters
);
7915 sli4_params
->wqv
= bf_get(cfg_wqv
, mbx_sli4_parameters
);
7916 sli4_params
->rqv
= bf_get(cfg_rqv
, mbx_sli4_parameters
);
7917 sli4_params
->sgl_pages_max
= bf_get(cfg_sgl_page_cnt
,
7918 mbx_sli4_parameters
);
7919 sli4_params
->sgl_pp_align
= bf_get(cfg_sgl_pp_align
,
7920 mbx_sli4_parameters
);
7925 * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
7926 * @pdev: pointer to PCI device
7927 * @pid: pointer to PCI device identifier
7929 * This routine is to be called to attach a device with SLI-3 interface spec
7930 * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
7931 * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
7932 * information of the device and driver to see if the driver state that it can
7933 * support this kind of device. If the match is successful, the driver core
7934 * invokes this routine. If this routine determines it can claim the HBA, it
7935 * does all the initialization that it needs to do to handle the HBA properly.
7938 * 0 - driver can claim the device
7939 * negative value - driver can not claim the device
7941 static int __devinit
7942 lpfc_pci_probe_one_s3(struct pci_dev
*pdev
, const struct pci_device_id
*pid
)
7944 struct lpfc_hba
*phba
;
7945 struct lpfc_vport
*vport
= NULL
;
7946 struct Scsi_Host
*shost
= NULL
;
7948 uint32_t cfg_mode
, intr_mode
;
7950 /* Allocate memory for HBA structure */
7951 phba
= lpfc_hba_alloc(pdev
);
7955 /* Perform generic PCI device enabling operation */
7956 error
= lpfc_enable_pci_dev(phba
);
7958 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
7959 "1401 Failed to enable pci device.\n");
7963 /* Set up SLI API function jump table for PCI-device group-0 HBAs */
7964 error
= lpfc_api_table_setup(phba
, LPFC_PCI_DEV_LP
);
7966 goto out_disable_pci_dev
;
7968 /* Set up SLI-3 specific device PCI memory space */
7969 error
= lpfc_sli_pci_mem_setup(phba
);
7971 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
7972 "1402 Failed to set up pci memory space.\n");
7973 goto out_disable_pci_dev
;
7976 /* Set up phase-1 common device driver resources */
7977 error
= lpfc_setup_driver_resource_phase1(phba
);
7979 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
7980 "1403 Failed to set up driver resource.\n");
7981 goto out_unset_pci_mem_s3
;
7984 /* Set up SLI-3 specific device driver resources */
7985 error
= lpfc_sli_driver_resource_setup(phba
);
7987 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
7988 "1404 Failed to set up driver resource.\n");
7989 goto out_unset_pci_mem_s3
;
7992 /* Initialize and populate the iocb list per host */
7993 error
= lpfc_init_iocb_list(phba
, LPFC_IOCB_LIST_CNT
);
7995 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
7996 "1405 Failed to initialize iocb list.\n");
7997 goto out_unset_driver_resource_s3
;
8000 /* Set up common device driver resources */
8001 error
= lpfc_setup_driver_resource_phase2(phba
);
8003 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8004 "1406 Failed to set up driver resource.\n");
8005 goto out_free_iocb_list
;
8008 /* Create SCSI host to the physical port */
8009 error
= lpfc_create_shost(phba
);
8011 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8012 "1407 Failed to create scsi host.\n");
8013 goto out_unset_driver_resource
;
8016 /* Configure sysfs attributes */
8017 vport
= phba
->pport
;
8018 error
= lpfc_alloc_sysfs_attr(vport
);
8020 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8021 "1476 Failed to allocate sysfs attr\n");
8022 goto out_destroy_shost
;
8025 shost
= lpfc_shost_from_vport(vport
); /* save shost for error cleanup */
8026 /* Now, trying to enable interrupt and bring up the device */
8027 cfg_mode
= phba
->cfg_use_msi
;
8029 /* Put device to a known state before enabling interrupt */
8030 lpfc_stop_port(phba
);
8031 /* Configure and enable interrupt */
8032 intr_mode
= lpfc_sli_enable_intr(phba
, cfg_mode
);
8033 if (intr_mode
== LPFC_INTR_ERROR
) {
8034 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8035 "0431 Failed to enable interrupt.\n");
8037 goto out_free_sysfs_attr
;
8039 /* SLI-3 HBA setup */
8040 if (lpfc_sli_hba_setup(phba
)) {
8041 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8042 "1477 Failed to set up hba\n");
8044 goto out_remove_device
;
8047 /* Wait 50ms for the interrupts of previous mailbox commands */
8049 /* Check active interrupts on message signaled interrupts */
8050 if (intr_mode
== 0 ||
8051 phba
->sli
.slistat
.sli_intr
> LPFC_MSIX_VECTORS
) {
8052 /* Log the current active interrupt mode */
8053 phba
->intr_mode
= intr_mode
;
8054 lpfc_log_intr_mode(phba
, intr_mode
);
8057 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
8058 "0447 Configure interrupt mode (%d) "
8059 "failed active interrupt test.\n",
8061 /* Disable the current interrupt mode */
8062 lpfc_sli_disable_intr(phba
);
8063 /* Try next level of interrupt mode */
8064 cfg_mode
= --intr_mode
;
8068 /* Perform post initialization setup */
8069 lpfc_post_init_setup(phba
);
8071 /* Check if there are static vports to be created. */
8072 lpfc_create_static_vport(phba
);
8077 lpfc_unset_hba(phba
);
8078 out_free_sysfs_attr
:
8079 lpfc_free_sysfs_attr(vport
);
8081 lpfc_destroy_shost(phba
);
8082 out_unset_driver_resource
:
8083 lpfc_unset_driver_resource_phase2(phba
);
8085 lpfc_free_iocb_list(phba
);
8086 out_unset_driver_resource_s3
:
8087 lpfc_sli_driver_resource_unset(phba
);
8088 out_unset_pci_mem_s3
:
8089 lpfc_sli_pci_mem_unset(phba
);
8090 out_disable_pci_dev
:
8091 lpfc_disable_pci_dev(phba
);
8093 scsi_host_put(shost
);
8095 lpfc_hba_free(phba
);
8100 * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
8101 * @pdev: pointer to PCI device
8103 * This routine is to be called to disattach a device with SLI-3 interface
8104 * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
8105 * removed from PCI bus, it performs all the necessary cleanup for the HBA
8106 * device to be removed from the PCI subsystem properly.
8108 static void __devexit
8109 lpfc_pci_remove_one_s3(struct pci_dev
*pdev
)
8111 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8112 struct lpfc_vport
*vport
= (struct lpfc_vport
*) shost
->hostdata
;
8113 struct lpfc_vport
**vports
;
8114 struct lpfc_hba
*phba
= vport
->phba
;
8116 int bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
8118 spin_lock_irq(&phba
->hbalock
);
8119 vport
->load_flag
|= FC_UNLOADING
;
8120 spin_unlock_irq(&phba
->hbalock
);
8122 lpfc_free_sysfs_attr(vport
);
8124 /* Release all the vports against this physical port */
8125 vports
= lpfc_create_vport_work_array(phba
);
8127 for (i
= 1; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++)
8128 fc_vport_terminate(vports
[i
]->fc_vport
);
8129 lpfc_destroy_vport_work_array(phba
, vports
);
8131 /* Remove FC host and then SCSI host with the physical port */
8132 fc_remove_host(shost
);
8133 scsi_remove_host(shost
);
8134 lpfc_cleanup(vport
);
8137 * Bring down the SLI Layer. This step disable all interrupts,
8138 * clears the rings, discards all mailbox commands, and resets
8142 /* HBA interrupt will be disabled after this call */
8143 lpfc_sli_hba_down(phba
);
8144 /* Stop kthread signal shall trigger work_done one more time */
8145 kthread_stop(phba
->worker_thread
);
8146 /* Final cleanup of txcmplq and reset the HBA */
8147 lpfc_sli_brdrestart(phba
);
8149 lpfc_stop_hba_timers(phba
);
8150 spin_lock_irq(&phba
->hbalock
);
8151 list_del_init(&vport
->listentry
);
8152 spin_unlock_irq(&phba
->hbalock
);
8154 lpfc_debugfs_terminate(vport
);
8156 /* Disable interrupt */
8157 lpfc_sli_disable_intr(phba
);
8159 pci_set_drvdata(pdev
, NULL
);
8160 scsi_host_put(shost
);
8163 * Call scsi_free before mem_free since scsi bufs are released to their
8164 * corresponding pools here.
8166 lpfc_scsi_free(phba
);
8167 lpfc_mem_free_all(phba
);
8169 dma_free_coherent(&pdev
->dev
, lpfc_sli_hbq_size(),
8170 phba
->hbqslimp
.virt
, phba
->hbqslimp
.phys
);
8172 /* Free resources associated with SLI2 interface */
8173 dma_free_coherent(&pdev
->dev
, SLI2_SLIM_SIZE
,
8174 phba
->slim2p
.virt
, phba
->slim2p
.phys
);
8176 /* unmap adapter SLIM and Control Registers */
8177 iounmap(phba
->ctrl_regs_memmap_p
);
8178 iounmap(phba
->slim_memmap_p
);
8180 lpfc_hba_free(phba
);
8182 pci_release_selected_regions(pdev
, bars
);
8183 pci_disable_device(pdev
);
8187 * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
8188 * @pdev: pointer to PCI device
8189 * @msg: power management message
8191 * This routine is to be called from the kernel's PCI subsystem to support
8192 * system Power Management (PM) to device with SLI-3 interface spec. When
8193 * PM invokes this method, it quiesces the device by stopping the driver's
8194 * worker thread for the device, turning off device's interrupt and DMA,
8195 * and bring the device offline. Note that as the driver implements the
8196 * minimum PM requirements to a power-aware driver's PM support for the
8197 * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
8198 * to the suspend() method call will be treated as SUSPEND and the driver will
8199 * fully reinitialize its device during resume() method call, the driver will
8200 * set device to PCI_D3hot state in PCI config space instead of setting it
8201 * according to the @msg provided by the PM.
8204 * 0 - driver suspended the device
8208 lpfc_pci_suspend_one_s3(struct pci_dev
*pdev
, pm_message_t msg
)
8210 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8211 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
8213 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
8214 "0473 PCI device Power Management suspend.\n");
8216 /* Bring down the device */
8217 lpfc_offline_prep(phba
);
8219 kthread_stop(phba
->worker_thread
);
8221 /* Disable interrupt from device */
8222 lpfc_sli_disable_intr(phba
);
8224 /* Save device state to PCI config space */
8225 pci_save_state(pdev
);
8226 pci_set_power_state(pdev
, PCI_D3hot
);
8232 * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
8233 * @pdev: pointer to PCI device
8235 * This routine is to be called from the kernel's PCI subsystem to support
8236 * system Power Management (PM) to device with SLI-3 interface spec. When PM
8237 * invokes this method, it restores the device's PCI config space state and
8238 * fully reinitializes the device and brings it online. Note that as the
8239 * driver implements the minimum PM requirements to a power-aware driver's
8240 * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
8241 * FREEZE) to the suspend() method call will be treated as SUSPEND and the
8242 * driver will fully reinitialize its device during resume() method call,
8243 * the device will be set to PCI_D0 directly in PCI config space before
8244 * restoring the state.
8247 * 0 - driver suspended the device
8251 lpfc_pci_resume_one_s3(struct pci_dev
*pdev
)
8253 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8254 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
8258 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
8259 "0452 PCI device Power Management resume.\n");
8261 /* Restore device state from PCI config space */
8262 pci_set_power_state(pdev
, PCI_D0
);
8263 pci_restore_state(pdev
);
8266 * As the new kernel behavior of pci_restore_state() API call clears
8267 * device saved_state flag, need to save the restored state again.
8269 pci_save_state(pdev
);
8271 if (pdev
->is_busmaster
)
8272 pci_set_master(pdev
);
8274 /* Startup the kernel thread for this host adapter. */
8275 phba
->worker_thread
= kthread_run(lpfc_do_work
, phba
,
8276 "lpfc_worker_%d", phba
->brd_no
);
8277 if (IS_ERR(phba
->worker_thread
)) {
8278 error
= PTR_ERR(phba
->worker_thread
);
8279 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8280 "0434 PM resume failed to start worker "
8281 "thread: error=x%x.\n", error
);
8285 /* Configure and enable interrupt */
8286 intr_mode
= lpfc_sli_enable_intr(phba
, phba
->intr_mode
);
8287 if (intr_mode
== LPFC_INTR_ERROR
) {
8288 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8289 "0430 PM resume Failed to enable interrupt\n");
8292 phba
->intr_mode
= intr_mode
;
8294 /* Restart HBA and bring it online */
8295 lpfc_sli_brdrestart(phba
);
8298 /* Log the current active interrupt mode */
8299 lpfc_log_intr_mode(phba
, phba
->intr_mode
);
8305 * lpfc_sli_prep_dev_for_recover - Prepare SLI3 device for pci slot recover
8306 * @phba: pointer to lpfc hba data structure.
8308 * This routine is called to prepare the SLI3 device for PCI slot recover. It
8309 * aborts all the outstanding SCSI I/Os to the pci device.
8312 lpfc_sli_prep_dev_for_recover(struct lpfc_hba
*phba
)
8314 struct lpfc_sli
*psli
= &phba
->sli
;
8315 struct lpfc_sli_ring
*pring
;
8317 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8318 "2723 PCI channel I/O abort preparing for recovery\n");
8321 * There may be errored I/Os through HBA, abort all I/Os on txcmplq
8322 * and let the SCSI mid-layer to retry them to recover.
8324 pring
= &psli
->ring
[psli
->fcp_ring
];
8325 lpfc_sli_abort_iocb_ring(phba
, pring
);
8329 * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset
8330 * @phba: pointer to lpfc hba data structure.
8332 * This routine is called to prepare the SLI3 device for PCI slot reset. It
8333 * disables the device interrupt and pci device, and aborts the internal FCP
8337 lpfc_sli_prep_dev_for_reset(struct lpfc_hba
*phba
)
8339 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8340 "2710 PCI channel disable preparing for reset\n");
8342 /* Block any management I/Os to the device */
8343 lpfc_block_mgmt_io(phba
);
8345 /* Block all SCSI devices' I/Os on the host */
8346 lpfc_scsi_dev_block(phba
);
8348 /* stop all timers */
8349 lpfc_stop_hba_timers(phba
);
8351 /* Disable interrupt and pci device */
8352 lpfc_sli_disable_intr(phba
);
8353 pci_disable_device(phba
->pcidev
);
8355 /* Flush all driver's outstanding SCSI I/Os as we are to reset */
8356 lpfc_sli_flush_fcp_rings(phba
);
8360 * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable
8361 * @phba: pointer to lpfc hba data structure.
8363 * This routine is called to prepare the SLI3 device for PCI slot permanently
8364 * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
8368 lpfc_sli_prep_dev_for_perm_failure(struct lpfc_hba
*phba
)
8370 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8371 "2711 PCI channel permanent disable for failure\n");
8372 /* Block all SCSI devices' I/Os on the host */
8373 lpfc_scsi_dev_block(phba
);
8375 /* stop all timers */
8376 lpfc_stop_hba_timers(phba
);
8378 /* Clean up all driver's outstanding SCSI I/Os */
8379 lpfc_sli_flush_fcp_rings(phba
);
8383 * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
8384 * @pdev: pointer to PCI device.
8385 * @state: the current PCI connection state.
8387 * This routine is called from the PCI subsystem for I/O error handling to
8388 * device with SLI-3 interface spec. This function is called by the PCI
8389 * subsystem after a PCI bus error affecting this device has been detected.
8390 * When this function is invoked, it will need to stop all the I/Os and
8391 * interrupt(s) to the device. Once that is done, it will return
8392 * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
8396 * PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link
8397 * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
8398 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
8400 static pci_ers_result_t
8401 lpfc_io_error_detected_s3(struct pci_dev
*pdev
, pci_channel_state_t state
)
8403 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8404 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
8407 case pci_channel_io_normal
:
8408 /* Non-fatal error, prepare for recovery */
8409 lpfc_sli_prep_dev_for_recover(phba
);
8410 return PCI_ERS_RESULT_CAN_RECOVER
;
8411 case pci_channel_io_frozen
:
8412 /* Fatal error, prepare for slot reset */
8413 lpfc_sli_prep_dev_for_reset(phba
);
8414 return PCI_ERS_RESULT_NEED_RESET
;
8415 case pci_channel_io_perm_failure
:
8416 /* Permanent failure, prepare for device down */
8417 lpfc_sli_prep_dev_for_perm_failure(phba
);
8418 return PCI_ERS_RESULT_DISCONNECT
;
8420 /* Unknown state, prepare and request slot reset */
8421 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8422 "0472 Unknown PCI error state: x%x\n", state
);
8423 lpfc_sli_prep_dev_for_reset(phba
);
8424 return PCI_ERS_RESULT_NEED_RESET
;
8429 * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
8430 * @pdev: pointer to PCI device.
8432 * This routine is called from the PCI subsystem for error handling to
8433 * device with SLI-3 interface spec. This is called after PCI bus has been
8434 * reset to restart the PCI card from scratch, as if from a cold-boot.
8435 * During the PCI subsystem error recovery, after driver returns
8436 * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
8437 * recovery and then call this routine before calling the .resume method
8438 * to recover the device. This function will initialize the HBA device,
8439 * enable the interrupt, but it will just put the HBA to offline state
8440 * without passing any I/O traffic.
8443 * PCI_ERS_RESULT_RECOVERED - the device has been recovered
8444 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
8446 static pci_ers_result_t
8447 lpfc_io_slot_reset_s3(struct pci_dev
*pdev
)
8449 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8450 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
8451 struct lpfc_sli
*psli
= &phba
->sli
;
8454 dev_printk(KERN_INFO
, &pdev
->dev
, "recovering from a slot reset.\n");
8455 if (pci_enable_device_mem(pdev
)) {
8456 printk(KERN_ERR
"lpfc: Cannot re-enable "
8457 "PCI device after reset.\n");
8458 return PCI_ERS_RESULT_DISCONNECT
;
8461 pci_restore_state(pdev
);
8464 * As the new kernel behavior of pci_restore_state() API call clears
8465 * device saved_state flag, need to save the restored state again.
8467 pci_save_state(pdev
);
8469 if (pdev
->is_busmaster
)
8470 pci_set_master(pdev
);
8472 spin_lock_irq(&phba
->hbalock
);
8473 psli
->sli_flag
&= ~LPFC_SLI_ACTIVE
;
8474 spin_unlock_irq(&phba
->hbalock
);
8476 /* Configure and enable interrupt */
8477 intr_mode
= lpfc_sli_enable_intr(phba
, phba
->intr_mode
);
8478 if (intr_mode
== LPFC_INTR_ERROR
) {
8479 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8480 "0427 Cannot re-enable interrupt after "
8482 return PCI_ERS_RESULT_DISCONNECT
;
8484 phba
->intr_mode
= intr_mode
;
8486 /* Take device offline, it will perform cleanup */
8487 lpfc_offline_prep(phba
);
8489 lpfc_sli_brdrestart(phba
);
8491 /* Log the current active interrupt mode */
8492 lpfc_log_intr_mode(phba
, phba
->intr_mode
);
8494 return PCI_ERS_RESULT_RECOVERED
;
8498 * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
8499 * @pdev: pointer to PCI device
8501 * This routine is called from the PCI subsystem for error handling to device
8502 * with SLI-3 interface spec. It is called when kernel error recovery tells
8503 * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
8504 * error recovery. After this call, traffic can start to flow from this device
8508 lpfc_io_resume_s3(struct pci_dev
*pdev
)
8510 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8511 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
8513 /* Bring device online, it will be no-op for non-fatal error resume */
8516 /* Clean up Advanced Error Reporting (AER) if needed */
8517 if (phba
->hba_flag
& HBA_AER_ENABLED
)
8518 pci_cleanup_aer_uncorrect_error_status(pdev
);
8522 * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
8523 * @phba: pointer to lpfc hba data structure.
8525 * returns the number of ELS/CT IOCBs to reserve
8528 lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba
*phba
)
8530 int max_xri
= phba
->sli4_hba
.max_cfg_param
.max_xri
;
8532 if (phba
->sli_rev
== LPFC_SLI_REV4
) {
8535 else if (max_xri
<= 256)
8537 else if (max_xri
<= 512)
8539 else if (max_xri
<= 1024)
8548 * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
8549 * @pdev: pointer to PCI device
8550 * @pid: pointer to PCI device identifier
8552 * This routine is called from the kernel's PCI subsystem to device with
8553 * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
8554 * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
8555 * information of the device and driver to see if the driver state that it
8556 * can support this kind of device. If the match is successful, the driver
8557 * core invokes this routine. If this routine determines it can claim the HBA,
8558 * it does all the initialization that it needs to do to handle the HBA
8562 * 0 - driver can claim the device
8563 * negative value - driver can not claim the device
8565 static int __devinit
8566 lpfc_pci_probe_one_s4(struct pci_dev
*pdev
, const struct pci_device_id
*pid
)
8568 struct lpfc_hba
*phba
;
8569 struct lpfc_vport
*vport
= NULL
;
8570 struct Scsi_Host
*shost
= NULL
;
8572 uint32_t cfg_mode
, intr_mode
;
8575 /* Allocate memory for HBA structure */
8576 phba
= lpfc_hba_alloc(pdev
);
8580 /* Perform generic PCI device enabling operation */
8581 error
= lpfc_enable_pci_dev(phba
);
8583 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8584 "1409 Failed to enable pci device.\n");
8588 /* Set up SLI API function jump table for PCI-device group-1 HBAs */
8589 error
= lpfc_api_table_setup(phba
, LPFC_PCI_DEV_OC
);
8591 goto out_disable_pci_dev
;
8593 /* Set up SLI-4 specific device PCI memory space */
8594 error
= lpfc_sli4_pci_mem_setup(phba
);
8596 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8597 "1410 Failed to set up pci memory space.\n");
8598 goto out_disable_pci_dev
;
8601 /* Set up phase-1 common device driver resources */
8602 error
= lpfc_setup_driver_resource_phase1(phba
);
8604 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8605 "1411 Failed to set up driver resource.\n");
8606 goto out_unset_pci_mem_s4
;
8609 /* Set up SLI-4 Specific device driver resources */
8610 error
= lpfc_sli4_driver_resource_setup(phba
);
8612 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8613 "1412 Failed to set up driver resource.\n");
8614 goto out_unset_pci_mem_s4
;
8617 /* Initialize and populate the iocb list per host */
8619 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
8620 "2821 initialize iocb list %d.\n",
8621 phba
->cfg_iocb_cnt
*1024);
8622 error
= lpfc_init_iocb_list(phba
, phba
->cfg_iocb_cnt
*1024);
8625 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8626 "1413 Failed to initialize iocb list.\n");
8627 goto out_unset_driver_resource_s4
;
8630 INIT_LIST_HEAD(&phba
->active_rrq_list
);
8632 /* Set up common device driver resources */
8633 error
= lpfc_setup_driver_resource_phase2(phba
);
8635 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8636 "1414 Failed to set up driver resource.\n");
8637 goto out_free_iocb_list
;
8640 /* Create SCSI host to the physical port */
8641 error
= lpfc_create_shost(phba
);
8643 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8644 "1415 Failed to create scsi host.\n");
8645 goto out_unset_driver_resource
;
8648 /* Configure sysfs attributes */
8649 vport
= phba
->pport
;
8650 error
= lpfc_alloc_sysfs_attr(vport
);
8652 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8653 "1416 Failed to allocate sysfs attr\n");
8654 goto out_destroy_shost
;
8657 shost
= lpfc_shost_from_vport(vport
); /* save shost for error cleanup */
8658 /* Now, trying to enable interrupt and bring up the device */
8659 cfg_mode
= phba
->cfg_use_msi
;
8661 /* Put device to a known state before enabling interrupt */
8662 lpfc_stop_port(phba
);
8663 /* Configure and enable interrupt */
8664 intr_mode
= lpfc_sli4_enable_intr(phba
, cfg_mode
);
8665 if (intr_mode
== LPFC_INTR_ERROR
) {
8666 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8667 "0426 Failed to enable interrupt.\n");
8669 goto out_free_sysfs_attr
;
8671 /* Default to single FCP EQ for non-MSI-X */
8672 if (phba
->intr_type
!= MSIX
)
8673 phba
->cfg_fcp_eq_count
= 1;
8674 else if (phba
->sli4_hba
.msix_vec_nr
< phba
->cfg_fcp_eq_count
)
8675 phba
->cfg_fcp_eq_count
= phba
->sli4_hba
.msix_vec_nr
- 1;
8676 /* Set up SLI-4 HBA */
8677 if (lpfc_sli4_hba_setup(phba
)) {
8678 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8679 "1421 Failed to set up hba\n");
8681 goto out_disable_intr
;
8684 /* Send NOP mbx cmds for non-INTx mode active interrupt test */
8686 mcnt
= lpfc_sli4_send_nop_mbox_cmds(phba
,
8689 /* Check active interrupts received only for MSI/MSI-X */
8690 if (intr_mode
== 0 ||
8691 phba
->sli
.slistat
.sli_intr
>= LPFC_ACT_INTR_CNT
) {
8692 /* Log the current active interrupt mode */
8693 phba
->intr_mode
= intr_mode
;
8694 lpfc_log_intr_mode(phba
, intr_mode
);
8697 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
8698 "0451 Configure interrupt mode (%d) "
8699 "failed active interrupt test.\n",
8701 /* Unset the previous SLI-4 HBA setup. */
8703 * TODO: Is this operation compatible with IF TYPE 2
8704 * devices? All port state is deleted and cleared.
8706 lpfc_sli4_unset_hba(phba
);
8707 /* Try next level of interrupt mode */
8708 cfg_mode
= --intr_mode
;
8711 /* Perform post initialization setup */
8712 lpfc_post_init_setup(phba
);
8714 /* Check if there are static vports to be created. */
8715 lpfc_create_static_vport(phba
);
8720 lpfc_sli4_disable_intr(phba
);
8721 out_free_sysfs_attr
:
8722 lpfc_free_sysfs_attr(vport
);
8724 lpfc_destroy_shost(phba
);
8725 out_unset_driver_resource
:
8726 lpfc_unset_driver_resource_phase2(phba
);
8728 lpfc_free_iocb_list(phba
);
8729 out_unset_driver_resource_s4
:
8730 lpfc_sli4_driver_resource_unset(phba
);
8731 out_unset_pci_mem_s4
:
8732 lpfc_sli4_pci_mem_unset(phba
);
8733 out_disable_pci_dev
:
8734 lpfc_disable_pci_dev(phba
);
8736 scsi_host_put(shost
);
8738 lpfc_hba_free(phba
);
8743 * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
8744 * @pdev: pointer to PCI device
8746 * This routine is called from the kernel's PCI subsystem to device with
8747 * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
8748 * removed from PCI bus, it performs all the necessary cleanup for the HBA
8749 * device to be removed from the PCI subsystem properly.
8751 static void __devexit
8752 lpfc_pci_remove_one_s4(struct pci_dev
*pdev
)
8754 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8755 struct lpfc_vport
*vport
= (struct lpfc_vport
*) shost
->hostdata
;
8756 struct lpfc_vport
**vports
;
8757 struct lpfc_hba
*phba
= vport
->phba
;
8760 /* Mark the device unloading flag */
8761 spin_lock_irq(&phba
->hbalock
);
8762 vport
->load_flag
|= FC_UNLOADING
;
8763 spin_unlock_irq(&phba
->hbalock
);
8765 /* Free the HBA sysfs attributes */
8766 lpfc_free_sysfs_attr(vport
);
8768 /* Release all the vports against this physical port */
8769 vports
= lpfc_create_vport_work_array(phba
);
8771 for (i
= 1; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++)
8772 fc_vport_terminate(vports
[i
]->fc_vport
);
8773 lpfc_destroy_vport_work_array(phba
, vports
);
8775 /* Remove FC host and then SCSI host with the physical port */
8776 fc_remove_host(shost
);
8777 scsi_remove_host(shost
);
8779 /* Perform cleanup on the physical port */
8780 lpfc_cleanup(vport
);
8783 * Bring down the SLI Layer. This step disables all interrupts,
8784 * clears the rings, discards all mailbox commands, and resets
8785 * the HBA FCoE function.
8787 lpfc_debugfs_terminate(vport
);
8788 lpfc_sli4_hba_unset(phba
);
8790 spin_lock_irq(&phba
->hbalock
);
8791 list_del_init(&vport
->listentry
);
8792 spin_unlock_irq(&phba
->hbalock
);
8794 /* Perform scsi free before driver resource_unset since scsi
8795 * buffers are released to their corresponding pools here.
8797 lpfc_scsi_free(phba
);
8798 lpfc_sli4_driver_resource_unset(phba
);
8800 /* Unmap adapter Control and Doorbell registers */
8801 lpfc_sli4_pci_mem_unset(phba
);
8803 /* Release PCI resources and disable device's PCI function */
8804 scsi_host_put(shost
);
8805 lpfc_disable_pci_dev(phba
);
8807 /* Finally, free the driver's device data structure */
8808 lpfc_hba_free(phba
);
8814 * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
8815 * @pdev: pointer to PCI device
8816 * @msg: power management message
8818 * This routine is called from the kernel's PCI subsystem to support system
8819 * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
8820 * this method, it quiesces the device by stopping the driver's worker
8821 * thread for the device, turning off device's interrupt and DMA, and bring
8822 * the device offline. Note that as the driver implements the minimum PM
8823 * requirements to a power-aware driver's PM support for suspend/resume -- all
8824 * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
8825 * method call will be treated as SUSPEND and the driver will fully
8826 * reinitialize its device during resume() method call, the driver will set
8827 * device to PCI_D3hot state in PCI config space instead of setting it
8828 * according to the @msg provided by the PM.
8831 * 0 - driver suspended the device
8835 lpfc_pci_suspend_one_s4(struct pci_dev
*pdev
, pm_message_t msg
)
8837 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8838 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
8840 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
8841 "2843 PCI device Power Management suspend.\n");
8843 /* Bring down the device */
8844 lpfc_offline_prep(phba
);
8846 kthread_stop(phba
->worker_thread
);
8848 /* Disable interrupt from device */
8849 lpfc_sli4_disable_intr(phba
);
8851 /* Save device state to PCI config space */
8852 pci_save_state(pdev
);
8853 pci_set_power_state(pdev
, PCI_D3hot
);
8859 * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
8860 * @pdev: pointer to PCI device
8862 * This routine is called from the kernel's PCI subsystem to support system
8863 * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
8864 * this method, it restores the device's PCI config space state and fully
8865 * reinitializes the device and brings it online. Note that as the driver
8866 * implements the minimum PM requirements to a power-aware driver's PM for
8867 * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
8868 * to the suspend() method call will be treated as SUSPEND and the driver
8869 * will fully reinitialize its device during resume() method call, the device
8870 * will be set to PCI_D0 directly in PCI config space before restoring the
8874 * 0 - driver suspended the device
8878 lpfc_pci_resume_one_s4(struct pci_dev
*pdev
)
8880 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8881 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
8885 lpfc_printf_log(phba
, KERN_INFO
, LOG_INIT
,
8886 "0292 PCI device Power Management resume.\n");
8888 /* Restore device state from PCI config space */
8889 pci_set_power_state(pdev
, PCI_D0
);
8890 pci_restore_state(pdev
);
8893 * As the new kernel behavior of pci_restore_state() API call clears
8894 * device saved_state flag, need to save the restored state again.
8896 pci_save_state(pdev
);
8898 if (pdev
->is_busmaster
)
8899 pci_set_master(pdev
);
8901 /* Startup the kernel thread for this host adapter. */
8902 phba
->worker_thread
= kthread_run(lpfc_do_work
, phba
,
8903 "lpfc_worker_%d", phba
->brd_no
);
8904 if (IS_ERR(phba
->worker_thread
)) {
8905 error
= PTR_ERR(phba
->worker_thread
);
8906 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8907 "0293 PM resume failed to start worker "
8908 "thread: error=x%x.\n", error
);
8912 /* Configure and enable interrupt */
8913 intr_mode
= lpfc_sli4_enable_intr(phba
, phba
->intr_mode
);
8914 if (intr_mode
== LPFC_INTR_ERROR
) {
8915 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8916 "0294 PM resume Failed to enable interrupt\n");
8919 phba
->intr_mode
= intr_mode
;
8921 /* Restart HBA and bring it online */
8922 lpfc_sli_brdrestart(phba
);
8925 /* Log the current active interrupt mode */
8926 lpfc_log_intr_mode(phba
, phba
->intr_mode
);
8932 * lpfc_sli4_prep_dev_for_recover - Prepare SLI4 device for pci slot recover
8933 * @phba: pointer to lpfc hba data structure.
8935 * This routine is called to prepare the SLI4 device for PCI slot recover. It
8936 * aborts all the outstanding SCSI I/Os to the pci device.
8939 lpfc_sli4_prep_dev_for_recover(struct lpfc_hba
*phba
)
8941 struct lpfc_sli
*psli
= &phba
->sli
;
8942 struct lpfc_sli_ring
*pring
;
8944 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8945 "2828 PCI channel I/O abort preparing for recovery\n");
8947 * There may be errored I/Os through HBA, abort all I/Os on txcmplq
8948 * and let the SCSI mid-layer to retry them to recover.
8950 pring
= &psli
->ring
[psli
->fcp_ring
];
8951 lpfc_sli_abort_iocb_ring(phba
, pring
);
8955 * lpfc_sli4_prep_dev_for_reset - Prepare SLI4 device for pci slot reset
8956 * @phba: pointer to lpfc hba data structure.
8958 * This routine is called to prepare the SLI4 device for PCI slot reset. It
8959 * disables the device interrupt and pci device, and aborts the internal FCP
8963 lpfc_sli4_prep_dev_for_reset(struct lpfc_hba
*phba
)
8965 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8966 "2826 PCI channel disable preparing for reset\n");
8968 /* Block any management I/Os to the device */
8969 lpfc_block_mgmt_io(phba
);
8971 /* Block all SCSI devices' I/Os on the host */
8972 lpfc_scsi_dev_block(phba
);
8974 /* stop all timers */
8975 lpfc_stop_hba_timers(phba
);
8977 /* Disable interrupt and pci device */
8978 lpfc_sli4_disable_intr(phba
);
8979 pci_disable_device(phba
->pcidev
);
8981 /* Flush all driver's outstanding SCSI I/Os as we are to reset */
8982 lpfc_sli_flush_fcp_rings(phba
);
8986 * lpfc_sli4_prep_dev_for_perm_failure - Prepare SLI4 dev for pci slot disable
8987 * @phba: pointer to lpfc hba data structure.
8989 * This routine is called to prepare the SLI4 device for PCI slot permanently
8990 * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
8994 lpfc_sli4_prep_dev_for_perm_failure(struct lpfc_hba
*phba
)
8996 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
8997 "2827 PCI channel permanent disable for failure\n");
8999 /* Block all SCSI devices' I/Os on the host */
9000 lpfc_scsi_dev_block(phba
);
9002 /* stop all timers */
9003 lpfc_stop_hba_timers(phba
);
9005 /* Clean up all driver's outstanding SCSI I/Os */
9006 lpfc_sli_flush_fcp_rings(phba
);
9010 * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
9011 * @pdev: pointer to PCI device.
9012 * @state: the current PCI connection state.
9014 * This routine is called from the PCI subsystem for error handling to device
9015 * with SLI-4 interface spec. This function is called by the PCI subsystem
9016 * after a PCI bus error affecting this device has been detected. When this
9017 * function is invoked, it will need to stop all the I/Os and interrupt(s)
9018 * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
9019 * for the PCI subsystem to perform proper recovery as desired.
9022 * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
9023 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
9025 static pci_ers_result_t
9026 lpfc_io_error_detected_s4(struct pci_dev
*pdev
, pci_channel_state_t state
)
9028 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9029 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9032 case pci_channel_io_normal
:
9033 /* Non-fatal error, prepare for recovery */
9034 lpfc_sli4_prep_dev_for_recover(phba
);
9035 return PCI_ERS_RESULT_CAN_RECOVER
;
9036 case pci_channel_io_frozen
:
9037 /* Fatal error, prepare for slot reset */
9038 lpfc_sli4_prep_dev_for_reset(phba
);
9039 return PCI_ERS_RESULT_NEED_RESET
;
9040 case pci_channel_io_perm_failure
:
9041 /* Permanent failure, prepare for device down */
9042 lpfc_sli4_prep_dev_for_perm_failure(phba
);
9043 return PCI_ERS_RESULT_DISCONNECT
;
9045 /* Unknown state, prepare and request slot reset */
9046 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
9047 "2825 Unknown PCI error state: x%x\n", state
);
9048 lpfc_sli4_prep_dev_for_reset(phba
);
9049 return PCI_ERS_RESULT_NEED_RESET
;
9054 * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
9055 * @pdev: pointer to PCI device.
9057 * This routine is called from the PCI subsystem for error handling to device
9058 * with SLI-4 interface spec. It is called after PCI bus has been reset to
9059 * restart the PCI card from scratch, as if from a cold-boot. During the
9060 * PCI subsystem error recovery, after the driver returns
9061 * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
9062 * recovery and then call this routine before calling the .resume method to
9063 * recover the device. This function will initialize the HBA device, enable
9064 * the interrupt, but it will just put the HBA to offline state without
9065 * passing any I/O traffic.
9068 * PCI_ERS_RESULT_RECOVERED - the device has been recovered
9069 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
9071 static pci_ers_result_t
9072 lpfc_io_slot_reset_s4(struct pci_dev
*pdev
)
9074 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9075 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9076 struct lpfc_sli
*psli
= &phba
->sli
;
9079 dev_printk(KERN_INFO
, &pdev
->dev
, "recovering from a slot reset.\n");
9080 if (pci_enable_device_mem(pdev
)) {
9081 printk(KERN_ERR
"lpfc: Cannot re-enable "
9082 "PCI device after reset.\n");
9083 return PCI_ERS_RESULT_DISCONNECT
;
9086 pci_restore_state(pdev
);
9087 if (pdev
->is_busmaster
)
9088 pci_set_master(pdev
);
9090 spin_lock_irq(&phba
->hbalock
);
9091 psli
->sli_flag
&= ~LPFC_SLI_ACTIVE
;
9092 spin_unlock_irq(&phba
->hbalock
);
9094 /* Configure and enable interrupt */
9095 intr_mode
= lpfc_sli4_enable_intr(phba
, phba
->intr_mode
);
9096 if (intr_mode
== LPFC_INTR_ERROR
) {
9097 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
9098 "2824 Cannot re-enable interrupt after "
9100 return PCI_ERS_RESULT_DISCONNECT
;
9102 phba
->intr_mode
= intr_mode
;
9104 /* Log the current active interrupt mode */
9105 lpfc_log_intr_mode(phba
, phba
->intr_mode
);
9107 return PCI_ERS_RESULT_RECOVERED
;
9111 * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
9112 * @pdev: pointer to PCI device
9114 * This routine is called from the PCI subsystem for error handling to device
9115 * with SLI-4 interface spec. It is called when kernel error recovery tells
9116 * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
9117 * error recovery. After this call, traffic can start to flow from this device
9121 lpfc_io_resume_s4(struct pci_dev
*pdev
)
9123 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9124 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9127 * In case of slot reset, as function reset is performed through
9128 * mailbox command which needs DMA to be enabled, this operation
9129 * has to be moved to the io resume phase. Taking device offline
9130 * will perform the necessary cleanup.
9132 if (!(phba
->sli
.sli_flag
& LPFC_SLI_ACTIVE
)) {
9133 /* Perform device reset */
9134 lpfc_offline_prep(phba
);
9136 lpfc_sli_brdrestart(phba
);
9137 /* Bring the device back online */
9141 /* Clean up Advanced Error Reporting (AER) if needed */
9142 if (phba
->hba_flag
& HBA_AER_ENABLED
)
9143 pci_cleanup_aer_uncorrect_error_status(pdev
);
9147 * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
9148 * @pdev: pointer to PCI device
9149 * @pid: pointer to PCI device identifier
9151 * This routine is to be registered to the kernel's PCI subsystem. When an
9152 * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
9153 * at PCI device-specific information of the device and driver to see if the
9154 * driver state that it can support this kind of device. If the match is
9155 * successful, the driver core invokes this routine. This routine dispatches
9156 * the action to the proper SLI-3 or SLI-4 device probing routine, which will
9157 * do all the initialization that it needs to do to handle the HBA device
9161 * 0 - driver can claim the device
9162 * negative value - driver can not claim the device
9164 static int __devinit
9165 lpfc_pci_probe_one(struct pci_dev
*pdev
, const struct pci_device_id
*pid
)
9168 struct lpfc_sli_intf intf
;
9170 if (pci_read_config_dword(pdev
, LPFC_SLI_INTF
, &intf
.word0
))
9173 if ((bf_get(lpfc_sli_intf_valid
, &intf
) == LPFC_SLI_INTF_VALID
) &&
9174 (bf_get(lpfc_sli_intf_slirev
, &intf
) == LPFC_SLI_INTF_REV_SLI4
))
9175 rc
= lpfc_pci_probe_one_s4(pdev
, pid
);
9177 rc
= lpfc_pci_probe_one_s3(pdev
, pid
);
9183 * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
9184 * @pdev: pointer to PCI device
9186 * This routine is to be registered to the kernel's PCI subsystem. When an
9187 * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
9188 * This routine dispatches the action to the proper SLI-3 or SLI-4 device
9189 * remove routine, which will perform all the necessary cleanup for the
9190 * device to be removed from the PCI subsystem properly.
9192 static void __devexit
9193 lpfc_pci_remove_one(struct pci_dev
*pdev
)
9195 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9196 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9198 switch (phba
->pci_dev_grp
) {
9199 case LPFC_PCI_DEV_LP
:
9200 lpfc_pci_remove_one_s3(pdev
);
9202 case LPFC_PCI_DEV_OC
:
9203 lpfc_pci_remove_one_s4(pdev
);
9206 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
9207 "1424 Invalid PCI device group: 0x%x\n",
9215 * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
9216 * @pdev: pointer to PCI device
9217 * @msg: power management message
9219 * This routine is to be registered to the kernel's PCI subsystem to support
9220 * system Power Management (PM). When PM invokes this method, it dispatches
9221 * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
9222 * suspend the device.
9225 * 0 - driver suspended the device
9229 lpfc_pci_suspend_one(struct pci_dev
*pdev
, pm_message_t msg
)
9231 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9232 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9235 switch (phba
->pci_dev_grp
) {
9236 case LPFC_PCI_DEV_LP
:
9237 rc
= lpfc_pci_suspend_one_s3(pdev
, msg
);
9239 case LPFC_PCI_DEV_OC
:
9240 rc
= lpfc_pci_suspend_one_s4(pdev
, msg
);
9243 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
9244 "1425 Invalid PCI device group: 0x%x\n",
9252 * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
9253 * @pdev: pointer to PCI device
9255 * This routine is to be registered to the kernel's PCI subsystem to support
9256 * system Power Management (PM). When PM invokes this method, it dispatches
9257 * the action to the proper SLI-3 or SLI-4 device resume routine, which will
9258 * resume the device.
9261 * 0 - driver suspended the device
9265 lpfc_pci_resume_one(struct pci_dev
*pdev
)
9267 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9268 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9271 switch (phba
->pci_dev_grp
) {
9272 case LPFC_PCI_DEV_LP
:
9273 rc
= lpfc_pci_resume_one_s3(pdev
);
9275 case LPFC_PCI_DEV_OC
:
9276 rc
= lpfc_pci_resume_one_s4(pdev
);
9279 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
9280 "1426 Invalid PCI device group: 0x%x\n",
9288 * lpfc_io_error_detected - lpfc method for handling PCI I/O error
9289 * @pdev: pointer to PCI device.
9290 * @state: the current PCI connection state.
9292 * This routine is registered to the PCI subsystem for error handling. This
9293 * function is called by the PCI subsystem after a PCI bus error affecting
9294 * this device has been detected. When this routine is invoked, it dispatches
9295 * the action to the proper SLI-3 or SLI-4 device error detected handling
9296 * routine, which will perform the proper error detected operation.
9299 * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
9300 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
9302 static pci_ers_result_t
9303 lpfc_io_error_detected(struct pci_dev
*pdev
, pci_channel_state_t state
)
9305 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9306 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9307 pci_ers_result_t rc
= PCI_ERS_RESULT_DISCONNECT
;
9309 switch (phba
->pci_dev_grp
) {
9310 case LPFC_PCI_DEV_LP
:
9311 rc
= lpfc_io_error_detected_s3(pdev
, state
);
9313 case LPFC_PCI_DEV_OC
:
9314 rc
= lpfc_io_error_detected_s4(pdev
, state
);
9317 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
9318 "1427 Invalid PCI device group: 0x%x\n",
9326 * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
9327 * @pdev: pointer to PCI device.
9329 * This routine is registered to the PCI subsystem for error handling. This
9330 * function is called after PCI bus has been reset to restart the PCI card
9331 * from scratch, as if from a cold-boot. When this routine is invoked, it
9332 * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
9333 * routine, which will perform the proper device reset.
9336 * PCI_ERS_RESULT_RECOVERED - the device has been recovered
9337 * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
9339 static pci_ers_result_t
9340 lpfc_io_slot_reset(struct pci_dev
*pdev
)
9342 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9343 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9344 pci_ers_result_t rc
= PCI_ERS_RESULT_DISCONNECT
;
9346 switch (phba
->pci_dev_grp
) {
9347 case LPFC_PCI_DEV_LP
:
9348 rc
= lpfc_io_slot_reset_s3(pdev
);
9350 case LPFC_PCI_DEV_OC
:
9351 rc
= lpfc_io_slot_reset_s4(pdev
);
9354 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
9355 "1428 Invalid PCI device group: 0x%x\n",
9363 * lpfc_io_resume - lpfc method for resuming PCI I/O operation
9364 * @pdev: pointer to PCI device
9366 * This routine is registered to the PCI subsystem for error handling. It
9367 * is called when kernel error recovery tells the lpfc driver that it is
9368 * OK to resume normal PCI operation after PCI bus error recovery. When
9369 * this routine is invoked, it dispatches the action to the proper SLI-3
9370 * or SLI-4 device io_resume routine, which will resume the device operation.
9373 lpfc_io_resume(struct pci_dev
*pdev
)
9375 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9376 struct lpfc_hba
*phba
= ((struct lpfc_vport
*)shost
->hostdata
)->phba
;
9378 switch (phba
->pci_dev_grp
) {
9379 case LPFC_PCI_DEV_LP
:
9380 lpfc_io_resume_s3(pdev
);
9382 case LPFC_PCI_DEV_OC
:
9383 lpfc_io_resume_s4(pdev
);
9386 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
9387 "1429 Invalid PCI device group: 0x%x\n",
9394 static struct pci_device_id lpfc_id_table
[] = {
9395 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_VIPER
,
9396 PCI_ANY_ID
, PCI_ANY_ID
, },
9397 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_FIREFLY
,
9398 PCI_ANY_ID
, PCI_ANY_ID
, },
9399 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_THOR
,
9400 PCI_ANY_ID
, PCI_ANY_ID
, },
9401 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_PEGASUS
,
9402 PCI_ANY_ID
, PCI_ANY_ID
, },
9403 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_CENTAUR
,
9404 PCI_ANY_ID
, PCI_ANY_ID
, },
9405 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_DRAGONFLY
,
9406 PCI_ANY_ID
, PCI_ANY_ID
, },
9407 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_SUPERFLY
,
9408 PCI_ANY_ID
, PCI_ANY_ID
, },
9409 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_RFLY
,
9410 PCI_ANY_ID
, PCI_ANY_ID
, },
9411 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_PFLY
,
9412 PCI_ANY_ID
, PCI_ANY_ID
, },
9413 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_NEPTUNE
,
9414 PCI_ANY_ID
, PCI_ANY_ID
, },
9415 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_NEPTUNE_SCSP
,
9416 PCI_ANY_ID
, PCI_ANY_ID
, },
9417 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_NEPTUNE_DCSP
,
9418 PCI_ANY_ID
, PCI_ANY_ID
, },
9419 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_HELIOS
,
9420 PCI_ANY_ID
, PCI_ANY_ID
, },
9421 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_HELIOS_SCSP
,
9422 PCI_ANY_ID
, PCI_ANY_ID
, },
9423 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_HELIOS_DCSP
,
9424 PCI_ANY_ID
, PCI_ANY_ID
, },
9425 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_BMID
,
9426 PCI_ANY_ID
, PCI_ANY_ID
, },
9427 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_BSMB
,
9428 PCI_ANY_ID
, PCI_ANY_ID
, },
9429 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_ZEPHYR
,
9430 PCI_ANY_ID
, PCI_ANY_ID
, },
9431 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_HORNET
,
9432 PCI_ANY_ID
, PCI_ANY_ID
, },
9433 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_ZEPHYR_SCSP
,
9434 PCI_ANY_ID
, PCI_ANY_ID
, },
9435 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_ZEPHYR_DCSP
,
9436 PCI_ANY_ID
, PCI_ANY_ID
, },
9437 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_ZMID
,
9438 PCI_ANY_ID
, PCI_ANY_ID
, },
9439 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_ZSMB
,
9440 PCI_ANY_ID
, PCI_ANY_ID
, },
9441 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_TFLY
,
9442 PCI_ANY_ID
, PCI_ANY_ID
, },
9443 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_LP101
,
9444 PCI_ANY_ID
, PCI_ANY_ID
, },
9445 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_LP10000S
,
9446 PCI_ANY_ID
, PCI_ANY_ID
, },
9447 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_LP11000S
,
9448 PCI_ANY_ID
, PCI_ANY_ID
, },
9449 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_LPE11000S
,
9450 PCI_ANY_ID
, PCI_ANY_ID
, },
9451 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_SAT
,
9452 PCI_ANY_ID
, PCI_ANY_ID
, },
9453 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_SAT_MID
,
9454 PCI_ANY_ID
, PCI_ANY_ID
, },
9455 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_SAT_SMB
,
9456 PCI_ANY_ID
, PCI_ANY_ID
, },
9457 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_SAT_DCSP
,
9458 PCI_ANY_ID
, PCI_ANY_ID
, },
9459 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_SAT_SCSP
,
9460 PCI_ANY_ID
, PCI_ANY_ID
, },
9461 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_SAT_S
,
9462 PCI_ANY_ID
, PCI_ANY_ID
, },
9463 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_PROTEUS_VF
,
9464 PCI_ANY_ID
, PCI_ANY_ID
, },
9465 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_PROTEUS_PF
,
9466 PCI_ANY_ID
, PCI_ANY_ID
, },
9467 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_PROTEUS_S
,
9468 PCI_ANY_ID
, PCI_ANY_ID
, },
9469 {PCI_VENDOR_ID_SERVERENGINE
, PCI_DEVICE_ID_TIGERSHARK
,
9470 PCI_ANY_ID
, PCI_ANY_ID
, },
9471 {PCI_VENDOR_ID_SERVERENGINE
, PCI_DEVICE_ID_TOMCAT
,
9472 PCI_ANY_ID
, PCI_ANY_ID
, },
9473 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_FALCON
,
9474 PCI_ANY_ID
, PCI_ANY_ID
, },
9475 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_BALIUS
,
9476 PCI_ANY_ID
, PCI_ANY_ID
, },
9477 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_LANCER_FC
,
9478 PCI_ANY_ID
, PCI_ANY_ID
, },
9479 {PCI_VENDOR_ID_EMULEX
, PCI_DEVICE_ID_LANCER_FCOE
,
9480 PCI_ANY_ID
, PCI_ANY_ID
, },
9484 MODULE_DEVICE_TABLE(pci
, lpfc_id_table
);
9486 static struct pci_error_handlers lpfc_err_handler
= {
9487 .error_detected
= lpfc_io_error_detected
,
9488 .slot_reset
= lpfc_io_slot_reset
,
9489 .resume
= lpfc_io_resume
,
9492 static struct pci_driver lpfc_driver
= {
9493 .name
= LPFC_DRIVER_NAME
,
9494 .id_table
= lpfc_id_table
,
9495 .probe
= lpfc_pci_probe_one
,
9496 .remove
= __devexit_p(lpfc_pci_remove_one
),
9497 .suspend
= lpfc_pci_suspend_one
,
9498 .resume
= lpfc_pci_resume_one
,
9499 .err_handler
= &lpfc_err_handler
,
9503 * lpfc_init - lpfc module initialization routine
9505 * This routine is to be invoked when the lpfc module is loaded into the
9506 * kernel. The special kernel macro module_init() is used to indicate the
9507 * role of this routine to the kernel as lpfc module entry point.
9511 * -ENOMEM - FC attach transport failed
9512 * all others - failed
9519 printk(LPFC_MODULE_DESC
"\n");
9520 printk(LPFC_COPYRIGHT
"\n");
9522 if (lpfc_enable_npiv
) {
9523 lpfc_transport_functions
.vport_create
= lpfc_vport_create
;
9524 lpfc_transport_functions
.vport_delete
= lpfc_vport_delete
;
9526 lpfc_transport_template
=
9527 fc_attach_transport(&lpfc_transport_functions
);
9528 if (lpfc_transport_template
== NULL
)
9530 if (lpfc_enable_npiv
) {
9531 lpfc_vport_transport_template
=
9532 fc_attach_transport(&lpfc_vport_transport_functions
);
9533 if (lpfc_vport_transport_template
== NULL
) {
9534 fc_release_transport(lpfc_transport_template
);
9538 error
= pci_register_driver(&lpfc_driver
);
9540 fc_release_transport(lpfc_transport_template
);
9541 if (lpfc_enable_npiv
)
9542 fc_release_transport(lpfc_vport_transport_template
);
9549 * lpfc_exit - lpfc module removal routine
9551 * This routine is invoked when the lpfc module is removed from the kernel.
9552 * The special kernel macro module_exit() is used to indicate the role of
9553 * this routine to the kernel as lpfc module exit point.
9558 pci_unregister_driver(&lpfc_driver
);
9559 fc_release_transport(lpfc_transport_template
);
9560 if (lpfc_enable_npiv
)
9561 fc_release_transport(lpfc_vport_transport_template
);
9562 if (_dump_buf_data
) {
9563 printk(KERN_ERR
"9062 BLKGRD: freeing %lu pages for "
9564 "_dump_buf_data at 0x%p\n",
9565 (1L << _dump_buf_data_order
), _dump_buf_data
);
9566 free_pages((unsigned long)_dump_buf_data
, _dump_buf_data_order
);
9569 if (_dump_buf_dif
) {
9570 printk(KERN_ERR
"9049 BLKGRD: freeing %lu pages for "
9571 "_dump_buf_dif at 0x%p\n",
9572 (1L << _dump_buf_dif_order
), _dump_buf_dif
);
9573 free_pages((unsigned long)_dump_buf_dif
, _dump_buf_dif_order
);
9577 module_init(lpfc_init
);
9578 module_exit(lpfc_exit
);
9579 MODULE_LICENSE("GPL");
9580 MODULE_DESCRIPTION(LPFC_MODULE_DESC
);
9581 MODULE_AUTHOR("Emulex Corporation - tech.support@emulex.com");
9582 MODULE_VERSION("0:" LPFC_DRIVER_VERSION
);