2 * Scsi Host Layer for MPT (Message Passing Technology) based controllers
4 * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
5 * Copyright (C) 2012-2014 LSI Corporation
6 * Copyright (C) 2013-2014 Avago Technologies
7 * (mailto: MPT-FusionLinux.pdl@avagotech.com)
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
24 * solely responsible for determining the appropriateness of using and
25 * distributing the Program and assumes all risks associated with its
26 * exercise of rights under this Agreement, including but not limited to
27 * the risks and costs of program errors, damage to or loss of data,
28 * programs or equipment, and unavailability or interruption of operations.
30 * DISCLAIMER OF LIABILITY
31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
45 #include <linux/module.h>
46 #include <linux/kernel.h>
47 #include <linux/init.h>
48 #include <linux/errno.h>
49 #include <linux/blkdev.h>
50 #include <linux/sched.h>
51 #include <linux/workqueue.h>
52 #include <linux/delay.h>
53 #include <linux/pci.h>
54 #include <linux/interrupt.h>
55 #include <linux/aer.h>
56 #include <linux/raid_class.h>
57 #include <asm/unaligned.h>
59 #include "mpt3sas_base.h"
61 #define RAID_CHANNEL 1
63 static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER
*ioc
,
64 struct _sas_node
*sas_expander
);
65 static void _firmware_event_work(struct work_struct
*work
);
67 static void _scsih_remove_device(struct MPT3SAS_ADAPTER
*ioc
,
68 struct _sas_device
*sas_device
);
69 static int _scsih_add_device(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
,
70 u8 retry_count
, u8 is_pd
);
72 static u8
_scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
);
74 /* global parameters */
75 LIST_HEAD(mpt3sas_ioc_list
);
76 /* global ioc lock for list operations */
77 DEFINE_SPINLOCK(gioc_lock
);
79 MODULE_AUTHOR(MPT3SAS_AUTHOR
);
80 MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION
);
81 MODULE_LICENSE("GPL");
82 MODULE_VERSION(MPT3SAS_DRIVER_VERSION
);
83 MODULE_ALIAS("mpt2sas");
85 /* local parameters */
86 static u8 scsi_io_cb_idx
= -1;
87 static u8 tm_cb_idx
= -1;
88 static u8 ctl_cb_idx
= -1;
89 static u8 base_cb_idx
= -1;
90 static u8 port_enable_cb_idx
= -1;
91 static u8 transport_cb_idx
= -1;
92 static u8 scsih_cb_idx
= -1;
93 static u8 config_cb_idx
= -1;
97 static u8 tm_tr_cb_idx
= -1 ;
98 static u8 tm_tr_volume_cb_idx
= -1 ;
99 static u8 tm_sas_control_cb_idx
= -1;
101 /* command line options */
102 static u32 logging_level
;
103 MODULE_PARM_DESC(logging_level
,
104 " bits for enabling additional logging info (default=0)");
107 static ushort max_sectors
= 0xFFFF;
108 module_param(max_sectors
, ushort
, 0);
109 MODULE_PARM_DESC(max_sectors
, "max sectors, range 64 to 32767 default=32767");
112 static int missing_delay
[2] = {-1, -1};
113 module_param_array(missing_delay
, int, NULL
, 0);
114 MODULE_PARM_DESC(missing_delay
, " device missing delay , io missing delay");
116 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */
117 #define MPT3SAS_MAX_LUN (16895)
118 static u64 max_lun
= MPT3SAS_MAX_LUN
;
119 module_param(max_lun
, ullong
, 0);
120 MODULE_PARM_DESC(max_lun
, " max lun, default=16895 ");
122 static ushort hbas_to_enumerate
;
123 module_param(hbas_to_enumerate
, ushort
, 0);
124 MODULE_PARM_DESC(hbas_to_enumerate
,
125 " 0 - enumerates both SAS 2.0 & SAS 3.0 generation HBAs\n \
126 1 - enumerates only SAS 2.0 generation HBAs\n \
127 2 - enumerates only SAS 3.0 generation HBAs (default=0)");
129 /* diag_buffer_enable is bitwise
131 * bit 1 set = SNAPSHOT
132 * bit 2 set = EXTENDED
134 * Either bit can be set, or both
136 static int diag_buffer_enable
= -1;
137 module_param(diag_buffer_enable
, int, 0);
138 MODULE_PARM_DESC(diag_buffer_enable
,
139 " post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
140 static int disable_discovery
= -1;
141 module_param(disable_discovery
, int, 0);
142 MODULE_PARM_DESC(disable_discovery
, " disable discovery ");
145 /* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
146 static int prot_mask
= -1;
147 module_param(prot_mask
, int, 0);
148 MODULE_PARM_DESC(prot_mask
, " host protection capabilities mask, def=7 ");
151 /* raid transport support */
152 struct raid_template
*mpt3sas_raid_template
;
153 struct raid_template
*mpt2sas_raid_template
;
157 * struct sense_info - common structure for obtaining sense keys
159 * @asc: additional sense code
160 * @ascq: additional sense code qualifier
168 #define MPT3SAS_PROCESS_TRIGGER_DIAG (0xFFFB)
169 #define MPT3SAS_TURN_ON_PFA_LED (0xFFFC)
170 #define MPT3SAS_PORT_ENABLE_COMPLETE (0xFFFD)
171 #define MPT3SAS_ABRT_TASK_SET (0xFFFE)
172 #define MPT3SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
174 * struct fw_event_work - firmware event struct
175 * @list: link list framework
176 * @work: work object (ioc->fault_reset_work_q)
177 * @ioc: per adapter object
178 * @device_handle: device handle
179 * @VF_ID: virtual function id
180 * @VP_ID: virtual port id
181 * @ignore: flag meaning this event has been marked to ignore
182 * @event: firmware event MPI2_EVENT_XXX defined in mpi2_ioc.h
183 * @refcount: kref for this event
184 * @event_data: reply event data payload follows
186 * This object stored on ioc->fw_event_list.
188 struct fw_event_work
{
189 struct list_head list
;
190 struct work_struct work
;
192 struct MPT3SAS_ADAPTER
*ioc
;
198 struct kref refcount
;
199 char event_data
[0] __aligned(4);
202 static void fw_event_work_free(struct kref
*r
)
204 kfree(container_of(r
, struct fw_event_work
, refcount
));
207 static void fw_event_work_get(struct fw_event_work
*fw_work
)
209 kref_get(&fw_work
->refcount
);
212 static void fw_event_work_put(struct fw_event_work
*fw_work
)
214 kref_put(&fw_work
->refcount
, fw_event_work_free
);
217 static struct fw_event_work
*alloc_fw_event_work(int len
)
219 struct fw_event_work
*fw_event
;
221 fw_event
= kzalloc(sizeof(*fw_event
) + len
, GFP_ATOMIC
);
225 kref_init(&fw_event
->refcount
);
230 * struct _scsi_io_transfer - scsi io transfer
231 * @handle: sas device handle (assigned by firmware)
232 * @is_raid: flag set for hidden raid components
233 * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
234 * @data_length: data transfer length
235 * @data_dma: dma pointer to data
238 * @cdb_length: cdb length
240 * @timeout: timeout for this command
241 * @VF_ID: virtual function id
242 * @VP_ID: virtual port id
243 * @valid_reply: flag set for reply message
244 * @sense_length: sense length
245 * @ioc_status: ioc status
246 * @scsi_state: scsi state
247 * @scsi_status: scsi staus
248 * @log_info: log information
249 * @transfer_length: data length transfer when there is a reply message
251 * Used for sending internal scsi commands to devices within this module.
252 * Refer to _scsi_send_scsi_io().
254 struct _scsi_io_transfer
{
257 enum dma_data_direction dir
;
260 u8 sense
[SCSI_SENSE_BUFFERSIZE
];
268 /* the following bits are only valid when 'valid_reply = 1' */
278 * _scsih_set_debug_level - global setting of ioc->logging_level.
280 * Note: The logging levels are defined in mpt3sas_debug.h.
283 _scsih_set_debug_level(const char *val
, struct kernel_param
*kp
)
285 int ret
= param_set_int(val
, kp
);
286 struct MPT3SAS_ADAPTER
*ioc
;
291 pr_info("setting logging_level(0x%08x)\n", logging_level
);
292 spin_lock(&gioc_lock
);
293 list_for_each_entry(ioc
, &mpt3sas_ioc_list
, list
)
294 ioc
->logging_level
= logging_level
;
295 spin_unlock(&gioc_lock
);
298 module_param_call(logging_level
, _scsih_set_debug_level
, param_get_int
,
299 &logging_level
, 0644);
302 * _scsih_srch_boot_sas_address - search based on sas_address
303 * @sas_address: sas address
304 * @boot_device: boot device object from bios page 2
306 * Returns 1 when there's a match, 0 means no match.
309 _scsih_srch_boot_sas_address(u64 sas_address
,
310 Mpi2BootDeviceSasWwid_t
*boot_device
)
312 return (sas_address
== le64_to_cpu(boot_device
->SASAddress
)) ? 1 : 0;
316 * _scsih_srch_boot_device_name - search based on device name
317 * @device_name: device name specified in INDENTIFY fram
318 * @boot_device: boot device object from bios page 2
320 * Returns 1 when there's a match, 0 means no match.
323 _scsih_srch_boot_device_name(u64 device_name
,
324 Mpi2BootDeviceDeviceName_t
*boot_device
)
326 return (device_name
== le64_to_cpu(boot_device
->DeviceName
)) ? 1 : 0;
330 * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
331 * @enclosure_logical_id: enclosure logical id
332 * @slot_number: slot number
333 * @boot_device: boot device object from bios page 2
335 * Returns 1 when there's a match, 0 means no match.
338 _scsih_srch_boot_encl_slot(u64 enclosure_logical_id
, u16 slot_number
,
339 Mpi2BootDeviceEnclosureSlot_t
*boot_device
)
341 return (enclosure_logical_id
== le64_to_cpu(boot_device
->
342 EnclosureLogicalID
) && slot_number
== le16_to_cpu(boot_device
->
343 SlotNumber
)) ? 1 : 0;
347 * _scsih_is_boot_device - search for matching boot device.
348 * @sas_address: sas address
349 * @device_name: device name specified in INDENTIFY fram
350 * @enclosure_logical_id: enclosure logical id
351 * @slot_number: slot number
352 * @form: specifies boot device form
353 * @boot_device: boot device object from bios page 2
355 * Returns 1 when there's a match, 0 means no match.
358 _scsih_is_boot_device(u64 sas_address
, u64 device_name
,
359 u64 enclosure_logical_id
, u16 slot
, u8 form
,
360 Mpi2BiosPage2BootDevice_t
*boot_device
)
365 case MPI2_BIOSPAGE2_FORM_SAS_WWID
:
368 rc
= _scsih_srch_boot_sas_address(
369 sas_address
, &boot_device
->SasWwid
);
371 case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT
:
372 if (!enclosure_logical_id
)
374 rc
= _scsih_srch_boot_encl_slot(
375 enclosure_logical_id
,
376 slot
, &boot_device
->EnclosureSlot
);
378 case MPI2_BIOSPAGE2_FORM_DEVICE_NAME
:
381 rc
= _scsih_srch_boot_device_name(
382 device_name
, &boot_device
->DeviceName
);
384 case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED
:
392 * _scsih_get_sas_address - set the sas_address for given device handle
393 * @handle: device handle
394 * @sas_address: sas address
396 * Returns 0 success, non-zero when failure
399 _scsih_get_sas_address(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
,
402 Mpi2SasDevicePage0_t sas_device_pg0
;
403 Mpi2ConfigReply_t mpi_reply
;
408 if (handle
<= ioc
->sas_hba
.num_phys
) {
409 *sas_address
= ioc
->sas_hba
.sas_address
;
413 if ((mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
, &sas_device_pg0
,
414 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
, handle
))) {
415 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n", ioc
->name
,
416 __FILE__
, __LINE__
, __func__
);
420 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) & MPI2_IOCSTATUS_MASK
;
421 if (ioc_status
== MPI2_IOCSTATUS_SUCCESS
) {
422 *sas_address
= le64_to_cpu(sas_device_pg0
.SASAddress
);
426 /* we hit this becuase the given parent handle doesn't exist */
427 if (ioc_status
== MPI2_IOCSTATUS_CONFIG_INVALID_PAGE
)
430 /* else error case */
432 "handle(0x%04x), ioc_status(0x%04x), failure at %s:%d/%s()!\n",
433 ioc
->name
, handle
, ioc_status
,
434 __FILE__
, __LINE__
, __func__
);
439 * _scsih_determine_boot_device - determine boot device.
440 * @ioc: per adapter object
441 * @device: either sas_device or raid_device object
442 * @is_raid: [flag] 1 = raid object, 0 = sas object
444 * Determines whether this device should be first reported device to
445 * to scsi-ml or sas transport, this purpose is for persistent boot device.
446 * There are primary, alternate, and current entries in bios page 2. The order
447 * priority is primary, alternate, then current. This routine saves
448 * the corresponding device object and is_raid flag in the ioc object.
449 * The saved data to be used later in _scsih_probe_boot_devices().
452 _scsih_determine_boot_device(struct MPT3SAS_ADAPTER
*ioc
,
453 void *device
, u8 is_raid
)
455 struct _sas_device
*sas_device
;
456 struct _raid_device
*raid_device
;
459 u64 enclosure_logical_id
;
462 /* only process this function when driver loads */
463 if (!ioc
->is_driver_loading
)
466 /* no Bios, return immediately */
467 if (!ioc
->bios_pg3
.BiosVersion
)
472 sas_address
= sas_device
->sas_address
;
473 device_name
= sas_device
->device_name
;
474 enclosure_logical_id
= sas_device
->enclosure_logical_id
;
475 slot
= sas_device
->slot
;
477 raid_device
= device
;
478 sas_address
= raid_device
->wwid
;
480 enclosure_logical_id
= 0;
484 if (!ioc
->req_boot_device
.device
) {
485 if (_scsih_is_boot_device(sas_address
, device_name
,
486 enclosure_logical_id
, slot
,
487 (ioc
->bios_pg2
.ReqBootDeviceForm
&
488 MPI2_BIOSPAGE2_FORM_MASK
),
489 &ioc
->bios_pg2
.RequestedBootDevice
)) {
490 dinitprintk(ioc
, pr_info(MPT3SAS_FMT
491 "%s: req_boot_device(0x%016llx)\n",
493 (unsigned long long)sas_address
));
494 ioc
->req_boot_device
.device
= device
;
495 ioc
->req_boot_device
.is_raid
= is_raid
;
499 if (!ioc
->req_alt_boot_device
.device
) {
500 if (_scsih_is_boot_device(sas_address
, device_name
,
501 enclosure_logical_id
, slot
,
502 (ioc
->bios_pg2
.ReqAltBootDeviceForm
&
503 MPI2_BIOSPAGE2_FORM_MASK
),
504 &ioc
->bios_pg2
.RequestedAltBootDevice
)) {
505 dinitprintk(ioc
, pr_info(MPT3SAS_FMT
506 "%s: req_alt_boot_device(0x%016llx)\n",
508 (unsigned long long)sas_address
));
509 ioc
->req_alt_boot_device
.device
= device
;
510 ioc
->req_alt_boot_device
.is_raid
= is_raid
;
514 if (!ioc
->current_boot_device
.device
) {
515 if (_scsih_is_boot_device(sas_address
, device_name
,
516 enclosure_logical_id
, slot
,
517 (ioc
->bios_pg2
.CurrentBootDeviceForm
&
518 MPI2_BIOSPAGE2_FORM_MASK
),
519 &ioc
->bios_pg2
.CurrentBootDevice
)) {
520 dinitprintk(ioc
, pr_info(MPT3SAS_FMT
521 "%s: current_boot_device(0x%016llx)\n",
523 (unsigned long long)sas_address
));
524 ioc
->current_boot_device
.device
= device
;
525 ioc
->current_boot_device
.is_raid
= is_raid
;
530 static struct _sas_device
*
531 __mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER
*ioc
,
532 struct MPT3SAS_TARGET
*tgt_priv
)
534 struct _sas_device
*ret
;
536 assert_spin_locked(&ioc
->sas_device_lock
);
538 ret
= tgt_priv
->sdev
;
545 static struct _sas_device
*
546 mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER
*ioc
,
547 struct MPT3SAS_TARGET
*tgt_priv
)
549 struct _sas_device
*ret
;
552 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
553 ret
= __mpt3sas_get_sdev_from_target(ioc
, tgt_priv
);
554 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
561 __mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER
*ioc
,
564 struct _sas_device
*sas_device
;
566 assert_spin_locked(&ioc
->sas_device_lock
);
568 list_for_each_entry(sas_device
, &ioc
->sas_device_list
, list
)
569 if (sas_device
->sas_address
== sas_address
)
572 list_for_each_entry(sas_device
, &ioc
->sas_device_init_list
, list
)
573 if (sas_device
->sas_address
== sas_address
)
579 sas_device_get(sas_device
);
584 * mpt3sas_get_sdev_by_addr - sas device search
585 * @ioc: per adapter object
586 * @sas_address: sas address
587 * Context: Calling function should acquire ioc->sas_device_lock
589 * This searches for sas_device based on sas_address, then return sas_device
593 mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER
*ioc
,
596 struct _sas_device
*sas_device
;
599 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
600 sas_device
= __mpt3sas_get_sdev_by_addr(ioc
,
602 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
607 static struct _sas_device
*
608 __mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
610 struct _sas_device
*sas_device
;
612 assert_spin_locked(&ioc
->sas_device_lock
);
614 list_for_each_entry(sas_device
, &ioc
->sas_device_list
, list
)
615 if (sas_device
->handle
== handle
)
618 list_for_each_entry(sas_device
, &ioc
->sas_device_init_list
, list
)
619 if (sas_device
->handle
== handle
)
625 sas_device_get(sas_device
);
630 * mpt3sas_get_sdev_by_handle - sas device search
631 * @ioc: per adapter object
632 * @handle: sas device handle (assigned by firmware)
633 * Context: Calling function should acquire ioc->sas_device_lock
635 * This searches for sas_device based on sas_address, then return sas_device
638 static struct _sas_device
*
639 mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
641 struct _sas_device
*sas_device
;
644 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
645 sas_device
= __mpt3sas_get_sdev_by_handle(ioc
, handle
);
646 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
652 * _scsih_sas_device_remove - remove sas_device from list.
653 * @ioc: per adapter object
654 * @sas_device: the sas_device object
655 * Context: This function will acquire ioc->sas_device_lock.
657 * If sas_device is on the list, remove it and decrement its reference count.
660 _scsih_sas_device_remove(struct MPT3SAS_ADAPTER
*ioc
,
661 struct _sas_device
*sas_device
)
668 "removing handle(0x%04x), sas_addr(0x%016llx)\n",
669 ioc
->name
, sas_device
->handle
,
670 (unsigned long long) sas_device
->sas_address
);
672 if (sas_device
->enclosure_handle
!= 0)
674 "removing enclosure logical id(0x%016llx), slot(%d)\n",
675 ioc
->name
, (unsigned long long)
676 sas_device
->enclosure_logical_id
, sas_device
->slot
);
678 if (sas_device
->connector_name
[0] != '\0')
680 "removing enclosure level(0x%04x), connector name( %s)\n",
681 ioc
->name
, sas_device
->enclosure_level
,
682 sas_device
->connector_name
);
685 * The lock serializes access to the list, but we still need to verify
686 * that nobody removed the entry while we were waiting on the lock.
688 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
689 if (!list_empty(&sas_device
->list
)) {
690 list_del_init(&sas_device
->list
);
691 sas_device_put(sas_device
);
693 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
697 * _scsih_device_remove_by_handle - removing device object by handle
698 * @ioc: per adapter object
699 * @handle: device handle
704 _scsih_device_remove_by_handle(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
706 struct _sas_device
*sas_device
;
709 if (ioc
->shost_recovery
)
712 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
713 sas_device
= __mpt3sas_get_sdev_by_handle(ioc
, handle
);
715 list_del_init(&sas_device
->list
);
716 sas_device_put(sas_device
);
718 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
720 _scsih_remove_device(ioc
, sas_device
);
721 sas_device_put(sas_device
);
726 * mpt3sas_device_remove_by_sas_address - removing device object by sas address
727 * @ioc: per adapter object
728 * @sas_address: device sas_address
733 mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER
*ioc
,
736 struct _sas_device
*sas_device
;
739 if (ioc
->shost_recovery
)
742 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
743 sas_device
= __mpt3sas_get_sdev_by_addr(ioc
, sas_address
);
745 list_del_init(&sas_device
->list
);
746 sas_device_put(sas_device
);
748 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
750 _scsih_remove_device(ioc
, sas_device
);
751 sas_device_put(sas_device
);
756 * _scsih_sas_device_add - insert sas_device to the list.
757 * @ioc: per adapter object
758 * @sas_device: the sas_device object
759 * Context: This function will acquire ioc->sas_device_lock.
761 * Adding new object to the ioc->sas_device_list.
764 _scsih_sas_device_add(struct MPT3SAS_ADAPTER
*ioc
,
765 struct _sas_device
*sas_device
)
769 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
770 "%s: handle(0x%04x), sas_addr(0x%016llx)\n",
771 ioc
->name
, __func__
, sas_device
->handle
,
772 (unsigned long long)sas_device
->sas_address
));
774 if (sas_device
->enclosure_handle
!= 0)
775 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
776 "%s: enclosure logical id(0x%016llx), slot( %d)\n",
777 ioc
->name
, __func__
, (unsigned long long)
778 sas_device
->enclosure_logical_id
, sas_device
->slot
));
780 if (sas_device
->connector_name
[0] != '\0')
781 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
782 "%s: enclosure level(0x%04x), connector name( %s)\n",
784 sas_device
->enclosure_level
, sas_device
->connector_name
));
786 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
787 sas_device_get(sas_device
);
788 list_add_tail(&sas_device
->list
, &ioc
->sas_device_list
);
789 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
791 if (!mpt3sas_transport_port_add(ioc
, sas_device
->handle
,
792 sas_device
->sas_address_parent
)) {
793 _scsih_sas_device_remove(ioc
, sas_device
);
794 } else if (!sas_device
->starget
) {
796 * When asyn scanning is enabled, its not possible to remove
797 * devices while scanning is turned on due to an oops in
798 * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
800 if (!ioc
->is_driver_loading
) {
801 mpt3sas_transport_port_remove(ioc
,
802 sas_device
->sas_address
,
803 sas_device
->sas_address_parent
);
804 _scsih_sas_device_remove(ioc
, sas_device
);
810 * _scsih_sas_device_init_add - insert sas_device to the list.
811 * @ioc: per adapter object
812 * @sas_device: the sas_device object
813 * Context: This function will acquire ioc->sas_device_lock.
815 * Adding new object at driver load time to the ioc->sas_device_init_list.
818 _scsih_sas_device_init_add(struct MPT3SAS_ADAPTER
*ioc
,
819 struct _sas_device
*sas_device
)
823 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
824 "%s: handle(0x%04x), sas_addr(0x%016llx)\n", ioc
->name
,
825 __func__
, sas_device
->handle
,
826 (unsigned long long)sas_device
->sas_address
));
828 if (sas_device
->enclosure_handle
!= 0)
829 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
830 "%s: enclosure logical id(0x%016llx), slot( %d)\n",
831 ioc
->name
, __func__
, (unsigned long long)
832 sas_device
->enclosure_logical_id
, sas_device
->slot
));
834 if (sas_device
->connector_name
[0] != '\0')
835 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
836 "%s: enclosure level(0x%04x), connector name( %s)\n",
837 ioc
->name
, __func__
, sas_device
->enclosure_level
,
838 sas_device
->connector_name
));
840 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
841 sas_device_get(sas_device
);
842 list_add_tail(&sas_device
->list
, &ioc
->sas_device_init_list
);
843 _scsih_determine_boot_device(ioc
, sas_device
, 0);
844 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
848 * _scsih_raid_device_find_by_id - raid device search
849 * @ioc: per adapter object
850 * @id: sas device target id
851 * @channel: sas device channel
852 * Context: Calling function should acquire ioc->raid_device_lock
854 * This searches for raid_device based on target id, then return raid_device
857 static struct _raid_device
*
858 _scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER
*ioc
, int id
, int channel
)
860 struct _raid_device
*raid_device
, *r
;
863 list_for_each_entry(raid_device
, &ioc
->raid_device_list
, list
) {
864 if (raid_device
->id
== id
&& raid_device
->channel
== channel
) {
875 * mpt3sas_raid_device_find_by_handle - raid device search
876 * @ioc: per adapter object
877 * @handle: sas device handle (assigned by firmware)
878 * Context: Calling function should acquire ioc->raid_device_lock
880 * This searches for raid_device based on handle, then return raid_device
883 struct _raid_device
*
884 mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
886 struct _raid_device
*raid_device
, *r
;
889 list_for_each_entry(raid_device
, &ioc
->raid_device_list
, list
) {
890 if (raid_device
->handle
!= handle
)
901 * _scsih_raid_device_find_by_wwid - raid device search
902 * @ioc: per adapter object
903 * @handle: sas device handle (assigned by firmware)
904 * Context: Calling function should acquire ioc->raid_device_lock
906 * This searches for raid_device based on wwid, then return raid_device
909 static struct _raid_device
*
910 _scsih_raid_device_find_by_wwid(struct MPT3SAS_ADAPTER
*ioc
, u64 wwid
)
912 struct _raid_device
*raid_device
, *r
;
915 list_for_each_entry(raid_device
, &ioc
->raid_device_list
, list
) {
916 if (raid_device
->wwid
!= wwid
)
927 * _scsih_raid_device_add - add raid_device object
928 * @ioc: per adapter object
929 * @raid_device: raid_device object
931 * This is added to the raid_device_list link list.
934 _scsih_raid_device_add(struct MPT3SAS_ADAPTER
*ioc
,
935 struct _raid_device
*raid_device
)
939 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
940 "%s: handle(0x%04x), wwid(0x%016llx)\n", ioc
->name
, __func__
,
941 raid_device
->handle
, (unsigned long long)raid_device
->wwid
));
943 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
944 list_add_tail(&raid_device
->list
, &ioc
->raid_device_list
);
945 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
949 * _scsih_raid_device_remove - delete raid_device object
950 * @ioc: per adapter object
951 * @raid_device: raid_device object
955 _scsih_raid_device_remove(struct MPT3SAS_ADAPTER
*ioc
,
956 struct _raid_device
*raid_device
)
960 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
961 list_del(&raid_device
->list
);
963 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
967 * mpt3sas_scsih_expander_find_by_handle - expander device search
968 * @ioc: per adapter object
969 * @handle: expander handle (assigned by firmware)
970 * Context: Calling function should acquire ioc->sas_device_lock
972 * This searches for expander device based on handle, then returns the
976 mpt3sas_scsih_expander_find_by_handle(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
978 struct _sas_node
*sas_expander
, *r
;
981 list_for_each_entry(sas_expander
, &ioc
->sas_expander_list
, list
) {
982 if (sas_expander
->handle
!= handle
)
992 * mpt3sas_scsih_expander_find_by_sas_address - expander device search
993 * @ioc: per adapter object
994 * @sas_address: sas address
995 * Context: Calling function should acquire ioc->sas_node_lock.
997 * This searches for expander device based on sas_address, then returns the
1001 mpt3sas_scsih_expander_find_by_sas_address(struct MPT3SAS_ADAPTER
*ioc
,
1004 struct _sas_node
*sas_expander
, *r
;
1007 list_for_each_entry(sas_expander
, &ioc
->sas_expander_list
, list
) {
1008 if (sas_expander
->sas_address
!= sas_address
)
1018 * _scsih_expander_node_add - insert expander device to the list.
1019 * @ioc: per adapter object
1020 * @sas_expander: the sas_device object
1021 * Context: This function will acquire ioc->sas_node_lock.
1023 * Adding new object to the ioc->sas_expander_list.
1028 _scsih_expander_node_add(struct MPT3SAS_ADAPTER
*ioc
,
1029 struct _sas_node
*sas_expander
)
1031 unsigned long flags
;
1033 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
1034 list_add_tail(&sas_expander
->list
, &ioc
->sas_expander_list
);
1035 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
1039 * _scsih_is_end_device - determines if device is an end device
1040 * @device_info: bitfield providing information about the device.
1043 * Returns 1 if end device.
1046 _scsih_is_end_device(u32 device_info
)
1048 if (device_info
& MPI2_SAS_DEVICE_INFO_END_DEVICE
&&
1049 ((device_info
& MPI2_SAS_DEVICE_INFO_SSP_TARGET
) |
1050 (device_info
& MPI2_SAS_DEVICE_INFO_STP_TARGET
) |
1051 (device_info
& MPI2_SAS_DEVICE_INFO_SATA_DEVICE
)))
1058 * _scsih_scsi_lookup_get - returns scmd entry
1059 * @ioc: per adapter object
1060 * @smid: system request message index
1062 * Returns the smid stored scmd pointer.
1064 static struct scsi_cmnd
*
1065 _scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
)
1067 return ioc
->scsi_lookup
[smid
- 1].scmd
;
1071 * _scsih_scsi_lookup_get_clear - returns scmd entry
1072 * @ioc: per adapter object
1073 * @smid: system request message index
1075 * Returns the smid stored scmd pointer.
1076 * Then will derefrence the stored scmd pointer.
1078 static inline struct scsi_cmnd
*
1079 _scsih_scsi_lookup_get_clear(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
)
1081 unsigned long flags
;
1082 struct scsi_cmnd
*scmd
;
1084 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1085 scmd
= ioc
->scsi_lookup
[smid
- 1].scmd
;
1086 ioc
->scsi_lookup
[smid
- 1].scmd
= NULL
;
1087 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1093 * _scsih_scsi_lookup_find_by_scmd - scmd lookup
1094 * @ioc: per adapter object
1095 * @smid: system request message index
1096 * @scmd: pointer to scsi command object
1097 * Context: This function will acquire ioc->scsi_lookup_lock.
1099 * This will search for a scmd pointer in the scsi_lookup array,
1100 * returning the revelent smid. A returned value of zero means invalid.
1103 _scsih_scsi_lookup_find_by_scmd(struct MPT3SAS_ADAPTER
*ioc
, struct scsi_cmnd
1107 unsigned long flags
;
1110 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1112 for (i
= 0; i
< ioc
->scsiio_depth
; i
++) {
1113 if (ioc
->scsi_lookup
[i
].scmd
== scmd
) {
1114 smid
= ioc
->scsi_lookup
[i
].smid
;
1119 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1124 * _scsih_scsi_lookup_find_by_target - search for matching channel:id
1125 * @ioc: per adapter object
1128 * Context: This function will acquire ioc->scsi_lookup_lock.
1130 * This will search for a matching channel:id in the scsi_lookup array,
1131 * returning 1 if found.
1134 _scsih_scsi_lookup_find_by_target(struct MPT3SAS_ADAPTER
*ioc
, int id
,
1138 unsigned long flags
;
1141 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1143 for (i
= 0 ; i
< ioc
->scsiio_depth
; i
++) {
1144 if (ioc
->scsi_lookup
[i
].scmd
&&
1145 (ioc
->scsi_lookup
[i
].scmd
->device
->id
== id
&&
1146 ioc
->scsi_lookup
[i
].scmd
->device
->channel
== channel
)) {
1152 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1157 * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
1158 * @ioc: per adapter object
1162 * Context: This function will acquire ioc->scsi_lookup_lock.
1164 * This will search for a matching channel:id:lun in the scsi_lookup array,
1165 * returning 1 if found.
1168 _scsih_scsi_lookup_find_by_lun(struct MPT3SAS_ADAPTER
*ioc
, int id
,
1169 unsigned int lun
, int channel
)
1172 unsigned long flags
;
1175 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1177 for (i
= 0 ; i
< ioc
->scsiio_depth
; i
++) {
1178 if (ioc
->scsi_lookup
[i
].scmd
&&
1179 (ioc
->scsi_lookup
[i
].scmd
->device
->id
== id
&&
1180 ioc
->scsi_lookup
[i
].scmd
->device
->channel
== channel
&&
1181 ioc
->scsi_lookup
[i
].scmd
->device
->lun
== lun
)) {
1187 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1192 * scsih_change_queue_depth - setting device queue depth
1193 * @sdev: scsi device struct
1194 * @qdepth: requested queue depth
1196 * Returns queue depth.
1199 scsih_change_queue_depth(struct scsi_device
*sdev
, int qdepth
)
1201 struct Scsi_Host
*shost
= sdev
->host
;
1203 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
1204 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
1205 struct MPT3SAS_TARGET
*sas_target_priv_data
;
1206 struct _sas_device
*sas_device
;
1207 unsigned long flags
;
1209 max_depth
= shost
->can_queue
;
1211 /* limit max device queue for SATA to 32 */
1212 sas_device_priv_data
= sdev
->hostdata
;
1213 if (!sas_device_priv_data
)
1215 sas_target_priv_data
= sas_device_priv_data
->sas_target
;
1216 if (!sas_target_priv_data
)
1218 if ((sas_target_priv_data
->flags
& MPT_TARGET_FLAGS_VOLUME
))
1221 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
1222 sas_device
= __mpt3sas_get_sdev_from_target(ioc
, sas_target_priv_data
);
1224 if (sas_device
->device_info
& MPI2_SAS_DEVICE_INFO_SATA_DEVICE
)
1225 max_depth
= MPT3SAS_SATA_QUEUE_DEPTH
;
1227 sas_device_put(sas_device
);
1229 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
1233 if (!sdev
->tagged_supported
)
1235 if (qdepth
> max_depth
)
1237 return scsi_change_queue_depth(sdev
, qdepth
);
1241 * scsih_target_alloc - target add routine
1242 * @starget: scsi target struct
1244 * Returns 0 if ok. Any other return is assumed to be an error and
1245 * the device is ignored.
1248 scsih_target_alloc(struct scsi_target
*starget
)
1250 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
1251 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
1252 struct MPT3SAS_TARGET
*sas_target_priv_data
;
1253 struct _sas_device
*sas_device
;
1254 struct _raid_device
*raid_device
;
1255 unsigned long flags
;
1256 struct sas_rphy
*rphy
;
1258 sas_target_priv_data
= kzalloc(sizeof(*sas_target_priv_data
),
1260 if (!sas_target_priv_data
)
1263 starget
->hostdata
= sas_target_priv_data
;
1264 sas_target_priv_data
->starget
= starget
;
1265 sas_target_priv_data
->handle
= MPT3SAS_INVALID_DEVICE_HANDLE
;
1268 if (starget
->channel
== RAID_CHANNEL
) {
1269 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
1270 raid_device
= _scsih_raid_device_find_by_id(ioc
, starget
->id
,
1273 sas_target_priv_data
->handle
= raid_device
->handle
;
1274 sas_target_priv_data
->sas_address
= raid_device
->wwid
;
1275 sas_target_priv_data
->flags
|= MPT_TARGET_FLAGS_VOLUME
;
1276 if (ioc
->is_warpdrive
)
1277 sas_target_priv_data
->raid_device
= raid_device
;
1278 raid_device
->starget
= starget
;
1280 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
1284 /* sas/sata devices */
1285 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
1286 rphy
= dev_to_rphy(starget
->dev
.parent
);
1287 sas_device
= __mpt3sas_get_sdev_by_addr(ioc
,
1288 rphy
->identify
.sas_address
);
1291 sas_target_priv_data
->handle
= sas_device
->handle
;
1292 sas_target_priv_data
->sas_address
= sas_device
->sas_address
;
1293 sas_target_priv_data
->sdev
= sas_device
;
1294 sas_device
->starget
= starget
;
1295 sas_device
->id
= starget
->id
;
1296 sas_device
->channel
= starget
->channel
;
1297 if (test_bit(sas_device
->handle
, ioc
->pd_handles
))
1298 sas_target_priv_data
->flags
|=
1299 MPT_TARGET_FLAGS_RAID_COMPONENT
;
1300 if (sas_device
->fast_path
)
1301 sas_target_priv_data
->flags
|= MPT_TARGET_FASTPATH_IO
;
1303 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
1309 * scsih_target_destroy - target destroy routine
1310 * @starget: scsi target struct
1315 scsih_target_destroy(struct scsi_target
*starget
)
1317 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
1318 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
1319 struct MPT3SAS_TARGET
*sas_target_priv_data
;
1320 struct _sas_device
*sas_device
;
1321 struct _raid_device
*raid_device
;
1322 unsigned long flags
;
1324 sas_target_priv_data
= starget
->hostdata
;
1325 if (!sas_target_priv_data
)
1328 if (starget
->channel
== RAID_CHANNEL
) {
1329 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
1330 raid_device
= _scsih_raid_device_find_by_id(ioc
, starget
->id
,
1333 raid_device
->starget
= NULL
;
1334 raid_device
->sdev
= NULL
;
1336 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
1340 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
1341 sas_device
= __mpt3sas_get_sdev_from_target(ioc
, sas_target_priv_data
);
1342 if (sas_device
&& (sas_device
->starget
== starget
) &&
1343 (sas_device
->id
== starget
->id
) &&
1344 (sas_device
->channel
== starget
->channel
))
1345 sas_device
->starget
= NULL
;
1349 * Corresponding get() is in _scsih_target_alloc()
1351 sas_target_priv_data
->sdev
= NULL
;
1352 sas_device_put(sas_device
);
1354 sas_device_put(sas_device
);
1356 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
1359 kfree(sas_target_priv_data
);
1360 starget
->hostdata
= NULL
;
1364 * scsih_slave_alloc - device add routine
1365 * @sdev: scsi device struct
1367 * Returns 0 if ok. Any other return is assumed to be an error and
1368 * the device is ignored.
1371 scsih_slave_alloc(struct scsi_device
*sdev
)
1373 struct Scsi_Host
*shost
;
1374 struct MPT3SAS_ADAPTER
*ioc
;
1375 struct MPT3SAS_TARGET
*sas_target_priv_data
;
1376 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
1377 struct scsi_target
*starget
;
1378 struct _raid_device
*raid_device
;
1379 struct _sas_device
*sas_device
;
1380 unsigned long flags
;
1382 sas_device_priv_data
= kzalloc(sizeof(*sas_device_priv_data
),
1384 if (!sas_device_priv_data
)
1387 sas_device_priv_data
->lun
= sdev
->lun
;
1388 sas_device_priv_data
->flags
= MPT_DEVICE_FLAGS_INIT
;
1390 starget
= scsi_target(sdev
);
1391 sas_target_priv_data
= starget
->hostdata
;
1392 sas_target_priv_data
->num_luns
++;
1393 sas_device_priv_data
->sas_target
= sas_target_priv_data
;
1394 sdev
->hostdata
= sas_device_priv_data
;
1395 if ((sas_target_priv_data
->flags
& MPT_TARGET_FLAGS_RAID_COMPONENT
))
1396 sdev
->no_uld_attach
= 1;
1398 shost
= dev_to_shost(&starget
->dev
);
1399 ioc
= shost_priv(shost
);
1400 if (starget
->channel
== RAID_CHANNEL
) {
1401 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
1402 raid_device
= _scsih_raid_device_find_by_id(ioc
,
1403 starget
->id
, starget
->channel
);
1405 raid_device
->sdev
= sdev
; /* raid is single lun */
1406 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
1409 if (!(sas_target_priv_data
->flags
& MPT_TARGET_FLAGS_VOLUME
)) {
1410 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
1411 sas_device
= __mpt3sas_get_sdev_by_addr(ioc
,
1412 sas_target_priv_data
->sas_address
);
1413 if (sas_device
&& (sas_device
->starget
== NULL
)) {
1414 sdev_printk(KERN_INFO
, sdev
,
1415 "%s : sas_device->starget set to starget @ %d\n",
1416 __func__
, __LINE__
);
1417 sas_device
->starget
= starget
;
1421 sas_device_put(sas_device
);
1423 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
1430 * scsih_slave_destroy - device destroy routine
1431 * @sdev: scsi device struct
1436 scsih_slave_destroy(struct scsi_device
*sdev
)
1438 struct MPT3SAS_TARGET
*sas_target_priv_data
;
1439 struct scsi_target
*starget
;
1440 struct Scsi_Host
*shost
;
1441 struct MPT3SAS_ADAPTER
*ioc
;
1442 struct _sas_device
*sas_device
;
1443 unsigned long flags
;
1445 if (!sdev
->hostdata
)
1448 starget
= scsi_target(sdev
);
1449 sas_target_priv_data
= starget
->hostdata
;
1450 sas_target_priv_data
->num_luns
--;
1452 shost
= dev_to_shost(&starget
->dev
);
1453 ioc
= shost_priv(shost
);
1455 if (!(sas_target_priv_data
->flags
& MPT_TARGET_FLAGS_VOLUME
)) {
1456 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
1457 sas_device
= __mpt3sas_get_sdev_from_target(ioc
,
1458 sas_target_priv_data
);
1459 if (sas_device
&& !sas_target_priv_data
->num_luns
)
1460 sas_device
->starget
= NULL
;
1463 sas_device_put(sas_device
);
1464 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
1467 kfree(sdev
->hostdata
);
1468 sdev
->hostdata
= NULL
;
1472 * _scsih_display_sata_capabilities - sata capabilities
1473 * @ioc: per adapter object
1474 * @handle: device handle
1475 * @sdev: scsi device struct
1478 _scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER
*ioc
,
1479 u16 handle
, struct scsi_device
*sdev
)
1481 Mpi2ConfigReply_t mpi_reply
;
1482 Mpi2SasDevicePage0_t sas_device_pg0
;
1487 if ((mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
, &sas_device_pg0
,
1488 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
, handle
))) {
1489 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
1490 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1494 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
1495 MPI2_IOCSTATUS_MASK
;
1496 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
1497 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
1498 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1502 flags
= le16_to_cpu(sas_device_pg0
.Flags
);
1503 device_info
= le32_to_cpu(sas_device_pg0
.DeviceInfo
);
1505 sdev_printk(KERN_INFO
, sdev
,
1506 "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
1507 "sw_preserve(%s)\n",
1508 (device_info
& MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE
) ? "y" : "n",
1509 (flags
& MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED
) ? "y" : "n",
1510 (flags
& MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY
) ? "y" :
1512 (flags
& MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED
) ? "y" : "n",
1513 (flags
& MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED
) ? "y" : "n",
1514 (flags
& MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE
) ? "y" : "n");
1518 * raid transport support -
1519 * Enabled for SLES11 and newer, in older kernels the driver will panic when
1520 * unloading the driver followed by a load - I beleive that the subroutine
1521 * raid_class_release() is not cleaning up properly.
1525 * scsih_is_raid - return boolean indicating device is raid volume
1526 * @dev the device struct object
1529 scsih_is_raid(struct device
*dev
)
1531 struct scsi_device
*sdev
= to_scsi_device(dev
);
1532 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(sdev
->host
);
1534 if (ioc
->is_warpdrive
)
1536 return (sdev
->channel
== RAID_CHANNEL
) ? 1 : 0;
1540 * scsih_get_resync - get raid volume resync percent complete
1541 * @dev the device struct object
1544 scsih_get_resync(struct device
*dev
)
1546 struct scsi_device
*sdev
= to_scsi_device(dev
);
1547 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(sdev
->host
);
1548 static struct _raid_device
*raid_device
;
1549 unsigned long flags
;
1550 Mpi2RaidVolPage0_t vol_pg0
;
1551 Mpi2ConfigReply_t mpi_reply
;
1552 u32 volume_status_flags
;
1553 u8 percent_complete
;
1556 percent_complete
= 0;
1558 if (ioc
->is_warpdrive
)
1561 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
1562 raid_device
= _scsih_raid_device_find_by_id(ioc
, sdev
->id
,
1565 handle
= raid_device
->handle
;
1566 percent_complete
= raid_device
->percent_complete
;
1568 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
1573 if (mpt3sas_config_get_raid_volume_pg0(ioc
, &mpi_reply
, &vol_pg0
,
1574 MPI2_RAID_VOLUME_PGAD_FORM_HANDLE
, handle
,
1575 sizeof(Mpi2RaidVolPage0_t
))) {
1576 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
1577 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1578 percent_complete
= 0;
1582 volume_status_flags
= le32_to_cpu(vol_pg0
.VolumeStatusFlags
);
1583 if (!(volume_status_flags
&
1584 MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
))
1585 percent_complete
= 0;
1589 switch (ioc
->hba_mpi_version_belonged
) {
1591 raid_set_resync(mpt2sas_raid_template
, dev
, percent_complete
);
1595 raid_set_resync(mpt3sas_raid_template
, dev
, percent_complete
);
1601 * scsih_get_state - get raid volume level
1602 * @dev the device struct object
1605 scsih_get_state(struct device
*dev
)
1607 struct scsi_device
*sdev
= to_scsi_device(dev
);
1608 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(sdev
->host
);
1609 static struct _raid_device
*raid_device
;
1610 unsigned long flags
;
1611 Mpi2RaidVolPage0_t vol_pg0
;
1612 Mpi2ConfigReply_t mpi_reply
;
1614 enum raid_state state
= RAID_STATE_UNKNOWN
;
1617 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
1618 raid_device
= _scsih_raid_device_find_by_id(ioc
, sdev
->id
,
1621 handle
= raid_device
->handle
;
1622 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
1627 if (mpt3sas_config_get_raid_volume_pg0(ioc
, &mpi_reply
, &vol_pg0
,
1628 MPI2_RAID_VOLUME_PGAD_FORM_HANDLE
, handle
,
1629 sizeof(Mpi2RaidVolPage0_t
))) {
1630 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
1631 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1635 volstate
= le32_to_cpu(vol_pg0
.VolumeStatusFlags
);
1636 if (volstate
& MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
) {
1637 state
= RAID_STATE_RESYNCING
;
1641 switch (vol_pg0
.VolumeState
) {
1642 case MPI2_RAID_VOL_STATE_OPTIMAL
:
1643 case MPI2_RAID_VOL_STATE_ONLINE
:
1644 state
= RAID_STATE_ACTIVE
;
1646 case MPI2_RAID_VOL_STATE_DEGRADED
:
1647 state
= RAID_STATE_DEGRADED
;
1649 case MPI2_RAID_VOL_STATE_FAILED
:
1650 case MPI2_RAID_VOL_STATE_MISSING
:
1651 state
= RAID_STATE_OFFLINE
;
1655 switch (ioc
->hba_mpi_version_belonged
) {
1657 raid_set_state(mpt2sas_raid_template
, dev
, state
);
1661 raid_set_state(mpt3sas_raid_template
, dev
, state
);
1667 * _scsih_set_level - set raid level
1668 * @sdev: scsi device struct
1669 * @volume_type: volume type
1672 _scsih_set_level(struct MPT3SAS_ADAPTER
*ioc
,
1673 struct scsi_device
*sdev
, u8 volume_type
)
1675 enum raid_level level
= RAID_LEVEL_UNKNOWN
;
1677 switch (volume_type
) {
1678 case MPI2_RAID_VOL_TYPE_RAID0
:
1679 level
= RAID_LEVEL_0
;
1681 case MPI2_RAID_VOL_TYPE_RAID10
:
1682 level
= RAID_LEVEL_10
;
1684 case MPI2_RAID_VOL_TYPE_RAID1E
:
1685 level
= RAID_LEVEL_1E
;
1687 case MPI2_RAID_VOL_TYPE_RAID1
:
1688 level
= RAID_LEVEL_1
;
1692 switch (ioc
->hba_mpi_version_belonged
) {
1694 raid_set_level(mpt2sas_raid_template
,
1695 &sdev
->sdev_gendev
, level
);
1699 raid_set_level(mpt3sas_raid_template
,
1700 &sdev
->sdev_gendev
, level
);
1707 * _scsih_get_volume_capabilities - volume capabilities
1708 * @ioc: per adapter object
1709 * @sas_device: the raid_device object
1711 * Returns 0 for success, else 1
1714 _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER
*ioc
,
1715 struct _raid_device
*raid_device
)
1717 Mpi2RaidVolPage0_t
*vol_pg0
;
1718 Mpi2RaidPhysDiskPage0_t pd_pg0
;
1719 Mpi2SasDevicePage0_t sas_device_pg0
;
1720 Mpi2ConfigReply_t mpi_reply
;
1724 if ((mpt3sas_config_get_number_pds(ioc
, raid_device
->handle
,
1725 &num_pds
)) || !num_pds
) {
1726 dfailprintk(ioc
, pr_warn(MPT3SAS_FMT
1727 "failure at %s:%d/%s()!\n", ioc
->name
, __FILE__
, __LINE__
,
1732 raid_device
->num_pds
= num_pds
;
1733 sz
= offsetof(Mpi2RaidVolPage0_t
, PhysDisk
) + (num_pds
*
1734 sizeof(Mpi2RaidVol0PhysDisk_t
));
1735 vol_pg0
= kzalloc(sz
, GFP_KERNEL
);
1737 dfailprintk(ioc
, pr_warn(MPT3SAS_FMT
1738 "failure at %s:%d/%s()!\n", ioc
->name
, __FILE__
, __LINE__
,
1743 if ((mpt3sas_config_get_raid_volume_pg0(ioc
, &mpi_reply
, vol_pg0
,
1744 MPI2_RAID_VOLUME_PGAD_FORM_HANDLE
, raid_device
->handle
, sz
))) {
1745 dfailprintk(ioc
, pr_warn(MPT3SAS_FMT
1746 "failure at %s:%d/%s()!\n", ioc
->name
, __FILE__
, __LINE__
,
1752 raid_device
->volume_type
= vol_pg0
->VolumeType
;
1754 /* figure out what the underlying devices are by
1755 * obtaining the device_info bits for the 1st device
1757 if (!(mpt3sas_config_get_phys_disk_pg0(ioc
, &mpi_reply
,
1758 &pd_pg0
, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM
,
1759 vol_pg0
->PhysDisk
[0].PhysDiskNum
))) {
1760 if (!(mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
,
1761 &sas_device_pg0
, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
,
1762 le16_to_cpu(pd_pg0
.DevHandle
)))) {
1763 raid_device
->device_info
=
1764 le32_to_cpu(sas_device_pg0
.DeviceInfo
);
1773 * _scsih_enable_tlr - setting TLR flags
1774 * @ioc: per adapter object
1775 * @sdev: scsi device struct
1777 * Enabling Transaction Layer Retries for tape devices when
1778 * vpd page 0x90 is present
1782 _scsih_enable_tlr(struct MPT3SAS_ADAPTER
*ioc
, struct scsi_device
*sdev
)
1786 if (sdev
->type
!= TYPE_TAPE
)
1789 if (!(ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_TLR
))
1792 sas_enable_tlr(sdev
);
1793 sdev_printk(KERN_INFO
, sdev
, "TLR %s\n",
1794 sas_is_tlr_enabled(sdev
) ? "Enabled" : "Disabled");
1800 * scsih_slave_configure - device configure routine.
1801 * @sdev: scsi device struct
1803 * Returns 0 if ok. Any other return is assumed to be an error and
1804 * the device is ignored.
1807 scsih_slave_configure(struct scsi_device
*sdev
)
1809 struct Scsi_Host
*shost
= sdev
->host
;
1810 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
1811 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
1812 struct MPT3SAS_TARGET
*sas_target_priv_data
;
1813 struct _sas_device
*sas_device
;
1814 struct _raid_device
*raid_device
;
1815 unsigned long flags
;
1820 u16 handle
, volume_handle
= 0;
1821 u64 volume_wwid
= 0;
1824 sas_device_priv_data
= sdev
->hostdata
;
1825 sas_device_priv_data
->configured_lun
= 1;
1826 sas_device_priv_data
->flags
&= ~MPT_DEVICE_FLAGS_INIT
;
1827 sas_target_priv_data
= sas_device_priv_data
->sas_target
;
1828 handle
= sas_target_priv_data
->handle
;
1830 /* raid volume handling */
1831 if (sas_target_priv_data
->flags
& MPT_TARGET_FLAGS_VOLUME
) {
1833 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
1834 raid_device
= mpt3sas_raid_device_find_by_handle(ioc
, handle
);
1835 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
1837 dfailprintk(ioc
, pr_warn(MPT3SAS_FMT
1838 "failure at %s:%d/%s()!\n", ioc
->name
, __FILE__
,
1839 __LINE__
, __func__
));
1843 if (_scsih_get_volume_capabilities(ioc
, raid_device
)) {
1844 dfailprintk(ioc
, pr_warn(MPT3SAS_FMT
1845 "failure at %s:%d/%s()!\n", ioc
->name
, __FILE__
,
1846 __LINE__
, __func__
));
1851 * WARPDRIVE: Initialize the required data for Direct IO
1853 mpt3sas_init_warpdrive_properties(ioc
, raid_device
);
1855 /* RAID Queue Depth Support
1856 * IS volume = underlying qdepth of drive type, either
1857 * MPT3SAS_SAS_QUEUE_DEPTH or MPT3SAS_SATA_QUEUE_DEPTH
1858 * IM/IME/R10 = 128 (MPT3SAS_RAID_QUEUE_DEPTH)
1860 if (raid_device
->device_info
&
1861 MPI2_SAS_DEVICE_INFO_SSP_TARGET
) {
1862 qdepth
= MPT3SAS_SAS_QUEUE_DEPTH
;
1865 qdepth
= MPT3SAS_SATA_QUEUE_DEPTH
;
1866 if (raid_device
->device_info
&
1867 MPI2_SAS_DEVICE_INFO_SATA_DEVICE
)
1873 switch (raid_device
->volume_type
) {
1874 case MPI2_RAID_VOL_TYPE_RAID0
:
1877 case MPI2_RAID_VOL_TYPE_RAID1E
:
1878 qdepth
= MPT3SAS_RAID_QUEUE_DEPTH
;
1879 if (ioc
->manu_pg10
.OEMIdentifier
&&
1880 (le32_to_cpu(ioc
->manu_pg10
.GenericFlags0
) &
1881 MFG10_GF0_R10_DISPLAY
) &&
1882 !(raid_device
->num_pds
% 2))
1887 case MPI2_RAID_VOL_TYPE_RAID1
:
1888 qdepth
= MPT3SAS_RAID_QUEUE_DEPTH
;
1891 case MPI2_RAID_VOL_TYPE_RAID10
:
1892 qdepth
= MPT3SAS_RAID_QUEUE_DEPTH
;
1895 case MPI2_RAID_VOL_TYPE_UNKNOWN
:
1897 qdepth
= MPT3SAS_RAID_QUEUE_DEPTH
;
1902 if (!ioc
->hide_ir_msg
)
1903 sdev_printk(KERN_INFO
, sdev
,
1904 "%s: handle(0x%04x), wwid(0x%016llx),"
1905 " pd_count(%d), type(%s)\n",
1906 r_level
, raid_device
->handle
,
1907 (unsigned long long)raid_device
->wwid
,
1908 raid_device
->num_pds
, ds
);
1910 if (shost
->max_sectors
> MPT3SAS_RAID_MAX_SECTORS
) {
1911 blk_queue_max_hw_sectors(sdev
->request_queue
,
1912 MPT3SAS_RAID_MAX_SECTORS
);
1913 sdev_printk(KERN_INFO
, sdev
,
1914 "Set queue's max_sector to: %u\n",
1915 MPT3SAS_RAID_MAX_SECTORS
);
1918 scsih_change_queue_depth(sdev
, qdepth
);
1920 /* raid transport support */
1921 if (!ioc
->is_warpdrive
)
1922 _scsih_set_level(ioc
, sdev
, raid_device
->volume_type
);
1926 /* non-raid handling */
1927 if (sas_target_priv_data
->flags
& MPT_TARGET_FLAGS_RAID_COMPONENT
) {
1928 if (mpt3sas_config_get_volume_handle(ioc
, handle
,
1930 dfailprintk(ioc
, pr_warn(MPT3SAS_FMT
1931 "failure at %s:%d/%s()!\n", ioc
->name
,
1932 __FILE__
, __LINE__
, __func__
));
1935 if (volume_handle
&& mpt3sas_config_get_volume_wwid(ioc
,
1936 volume_handle
, &volume_wwid
)) {
1937 dfailprintk(ioc
, pr_warn(MPT3SAS_FMT
1938 "failure at %s:%d/%s()!\n", ioc
->name
,
1939 __FILE__
, __LINE__
, __func__
));
1944 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
1945 sas_device
= __mpt3sas_get_sdev_by_addr(ioc
,
1946 sas_device_priv_data
->sas_target
->sas_address
);
1948 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
1949 dfailprintk(ioc
, pr_warn(MPT3SAS_FMT
1950 "failure at %s:%d/%s()!\n", ioc
->name
, __FILE__
, __LINE__
,
1955 sas_device
->volume_handle
= volume_handle
;
1956 sas_device
->volume_wwid
= volume_wwid
;
1957 if (sas_device
->device_info
& MPI2_SAS_DEVICE_INFO_SSP_TARGET
) {
1958 qdepth
= MPT3SAS_SAS_QUEUE_DEPTH
;
1960 if (sas_device
->device_info
&
1961 MPI2_SAS_DEVICE_INFO_SEP
) {
1962 sdev_printk(KERN_WARNING
, sdev
,
1963 "set ignore_delay_remove for handle(0x%04x)\n",
1964 sas_device_priv_data
->sas_target
->handle
);
1965 sas_device_priv_data
->ignore_delay_remove
= 1;
1970 qdepth
= MPT3SAS_SATA_QUEUE_DEPTH
;
1971 if (sas_device
->device_info
& MPI2_SAS_DEVICE_INFO_STP_TARGET
)
1973 else if (sas_device
->device_info
&
1974 MPI2_SAS_DEVICE_INFO_SATA_DEVICE
)
1978 sdev_printk(KERN_INFO
, sdev
, "%s: handle(0x%04x), " \
1979 "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
1980 ds
, handle
, (unsigned long long)sas_device
->sas_address
,
1981 sas_device
->phy
, (unsigned long long)sas_device
->device_name
);
1982 if (sas_device
->enclosure_handle
!= 0)
1983 sdev_printk(KERN_INFO
, sdev
,
1984 "%s: enclosure_logical_id(0x%016llx), slot(%d)\n",
1985 ds
, (unsigned long long)
1986 sas_device
->enclosure_logical_id
, sas_device
->slot
);
1987 if (sas_device
->connector_name
[0] != '\0')
1988 sdev_printk(KERN_INFO
, sdev
,
1989 "%s: enclosure level(0x%04x), connector name( %s)\n",
1990 ds
, sas_device
->enclosure_level
,
1991 sas_device
->connector_name
);
1993 sas_device_put(sas_device
);
1994 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
1997 _scsih_display_sata_capabilities(ioc
, handle
, sdev
);
2000 scsih_change_queue_depth(sdev
, qdepth
);
2003 sas_read_port_mode_page(sdev
);
2004 _scsih_enable_tlr(ioc
, sdev
);
2011 * scsih_bios_param - fetch head, sector, cylinder info for a disk
2012 * @sdev: scsi device struct
2013 * @bdev: pointer to block device context
2014 * @capacity: device size (in 512 byte sectors)
2015 * @params: three element array to place output:
2016 * params[0] number of heads (max 255)
2017 * params[1] number of sectors (max 63)
2018 * params[2] number of cylinders
2023 scsih_bios_param(struct scsi_device
*sdev
, struct block_device
*bdev
,
2024 sector_t capacity
, int params
[])
2034 dummy
= heads
* sectors
;
2035 cylinders
= capacity
;
2036 sector_div(cylinders
, dummy
);
2039 * Handle extended translation size for logical drives
2042 if ((ulong
)capacity
>= 0x200000) {
2045 dummy
= heads
* sectors
;
2046 cylinders
= capacity
;
2047 sector_div(cylinders
, dummy
);
2052 params
[1] = sectors
;
2053 params
[2] = cylinders
;
2059 * _scsih_response_code - translation of device response code
2060 * @ioc: per adapter object
2061 * @response_code: response code returned by the device
2066 _scsih_response_code(struct MPT3SAS_ADAPTER
*ioc
, u8 response_code
)
2070 switch (response_code
) {
2071 case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE
:
2072 desc
= "task management request completed";
2074 case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME
:
2075 desc
= "invalid frame";
2077 case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED
:
2078 desc
= "task management request not supported";
2080 case MPI2_SCSITASKMGMT_RSP_TM_FAILED
:
2081 desc
= "task management request failed";
2083 case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED
:
2084 desc
= "task management request succeeded";
2086 case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN
:
2087 desc
= "invalid lun";
2090 desc
= "overlapped tag attempted";
2092 case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC
:
2093 desc
= "task queued, however not sent to target";
2099 pr_warn(MPT3SAS_FMT
"response_code(0x%01x): %s\n",
2100 ioc
->name
, response_code
, desc
);
2104 * _scsih_tm_done - tm completion routine
2105 * @ioc: per adapter object
2106 * @smid: system request message index
2107 * @msix_index: MSIX table index supplied by the OS
2108 * @reply: reply message frame(lower 32bit addr)
2111 * The callback handler when using scsih_issue_tm.
2113 * Return 1 meaning mf should be freed from _base_interrupt
2114 * 0 means the mf is freed from this function.
2117 _scsih_tm_done(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
, u32 reply
)
2119 MPI2DefaultReply_t
*mpi_reply
;
2121 if (ioc
->tm_cmds
.status
== MPT3_CMD_NOT_USED
)
2123 if (ioc
->tm_cmds
.smid
!= smid
)
2125 ioc
->tm_cmds
.status
|= MPT3_CMD_COMPLETE
;
2126 mpi_reply
= mpt3sas_base_get_reply_virt_addr(ioc
, reply
);
2128 memcpy(ioc
->tm_cmds
.reply
, mpi_reply
, mpi_reply
->MsgLength
*4);
2129 ioc
->tm_cmds
.status
|= MPT3_CMD_REPLY_VALID
;
2131 ioc
->tm_cmds
.status
&= ~MPT3_CMD_PENDING
;
2132 complete(&ioc
->tm_cmds
.done
);
2137 * mpt3sas_scsih_set_tm_flag - set per target tm_busy
2138 * @ioc: per adapter object
2139 * @handle: device handle
2141 * During taskmangement request, we need to freeze the device queue.
2144 mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
2146 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2147 struct scsi_device
*sdev
;
2150 shost_for_each_device(sdev
, ioc
->shost
) {
2153 sas_device_priv_data
= sdev
->hostdata
;
2154 if (!sas_device_priv_data
)
2156 if (sas_device_priv_data
->sas_target
->handle
== handle
) {
2157 sas_device_priv_data
->sas_target
->tm_busy
= 1;
2159 ioc
->ignore_loginfos
= 1;
2165 * mpt3sas_scsih_clear_tm_flag - clear per target tm_busy
2166 * @ioc: per adapter object
2167 * @handle: device handle
2169 * During taskmangement request, we need to freeze the device queue.
2172 mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
2174 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2175 struct scsi_device
*sdev
;
2178 shost_for_each_device(sdev
, ioc
->shost
) {
2181 sas_device_priv_data
= sdev
->hostdata
;
2182 if (!sas_device_priv_data
)
2184 if (sas_device_priv_data
->sas_target
->handle
== handle
) {
2185 sas_device_priv_data
->sas_target
->tm_busy
= 0;
2187 ioc
->ignore_loginfos
= 0;
2193 * mpt3sas_scsih_issue_tm - main routine for sending tm requests
2194 * @ioc: per adapter struct
2195 * @device_handle: device handle
2196 * @channel: the channel assigned by the OS
2197 * @id: the id assigned by the OS
2199 * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
2200 * @smid_task: smid assigned to the task
2201 * @timeout: timeout in seconds
2204 * A generic API for sending task management requests to firmware.
2206 * The callback index is set inside `ioc->tm_cb_idx`.
2208 * Return SUCCESS or FAILED.
2211 mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
, uint channel
,
2212 uint id
, uint lun
, u8 type
, u16 smid_task
, ulong timeout
)
2214 Mpi2SCSITaskManagementRequest_t
*mpi_request
;
2215 Mpi2SCSITaskManagementReply_t
*mpi_reply
;
2218 struct scsiio_tracker
*scsi_lookup
= NULL
;
2222 lockdep_assert_held(&ioc
->tm_cmds
.mutex
);
2224 if (ioc
->tm_cmds
.status
!= MPT3_CMD_NOT_USED
) {
2225 pr_info(MPT3SAS_FMT
"%s: tm_cmd busy!!!\n",
2226 __func__
, ioc
->name
);
2230 if (ioc
->shost_recovery
|| ioc
->remove_host
||
2231 ioc
->pci_error_recovery
) {
2232 pr_info(MPT3SAS_FMT
"%s: host reset in progress!\n",
2233 __func__
, ioc
->name
);
2237 ioc_state
= mpt3sas_base_get_iocstate(ioc
, 0);
2238 if (ioc_state
& MPI2_DOORBELL_USED
) {
2239 dhsprintk(ioc
, pr_info(MPT3SAS_FMT
2240 "unexpected doorbell active!\n", ioc
->name
));
2241 rc
= mpt3sas_base_hard_reset_handler(ioc
, FORCE_BIG_HAMMER
);
2242 return (!rc
) ? SUCCESS
: FAILED
;
2245 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
) {
2246 mpt3sas_base_fault_info(ioc
, ioc_state
&
2247 MPI2_DOORBELL_DATA_MASK
);
2248 rc
= mpt3sas_base_hard_reset_handler(ioc
, FORCE_BIG_HAMMER
);
2249 return (!rc
) ? SUCCESS
: FAILED
;
2252 smid
= mpt3sas_base_get_smid_hpr(ioc
, ioc
->tm_cb_idx
);
2254 pr_err(MPT3SAS_FMT
"%s: failed obtaining a smid\n",
2255 ioc
->name
, __func__
);
2259 if (type
== MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK
)
2260 scsi_lookup
= &ioc
->scsi_lookup
[smid_task
- 1];
2262 dtmprintk(ioc
, pr_info(MPT3SAS_FMT
2263 "sending tm: handle(0x%04x), task_type(0x%02x), smid(%d)\n",
2264 ioc
->name
, handle
, type
, smid_task
));
2265 ioc
->tm_cmds
.status
= MPT3_CMD_PENDING
;
2266 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
2267 ioc
->tm_cmds
.smid
= smid
;
2268 memset(mpi_request
, 0, sizeof(Mpi2SCSITaskManagementRequest_t
));
2269 memset(ioc
->tm_cmds
.reply
, 0, sizeof(Mpi2SCSITaskManagementReply_t
));
2270 mpi_request
->Function
= MPI2_FUNCTION_SCSI_TASK_MGMT
;
2271 mpi_request
->DevHandle
= cpu_to_le16(handle
);
2272 mpi_request
->TaskType
= type
;
2273 mpi_request
->TaskMID
= cpu_to_le16(smid_task
);
2274 int_to_scsilun(lun
, (struct scsi_lun
*)mpi_request
->LUN
);
2275 mpt3sas_scsih_set_tm_flag(ioc
, handle
);
2276 init_completion(&ioc
->tm_cmds
.done
);
2277 if ((type
== MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK
) &&
2278 (scsi_lookup
->msix_io
< ioc
->reply_queue_count
))
2279 msix_task
= scsi_lookup
->msix_io
;
2282 mpt3sas_base_put_smid_hi_priority(ioc
, smid
, msix_task
);
2283 wait_for_completion_timeout(&ioc
->tm_cmds
.done
, timeout
*HZ
);
2284 if (!(ioc
->tm_cmds
.status
& MPT3_CMD_COMPLETE
)) {
2285 pr_err(MPT3SAS_FMT
"%s: timeout\n",
2286 ioc
->name
, __func__
);
2287 _debug_dump_mf(mpi_request
,
2288 sizeof(Mpi2SCSITaskManagementRequest_t
)/4);
2289 if (!(ioc
->tm_cmds
.status
& MPT3_CMD_RESET
)) {
2290 rc
= mpt3sas_base_hard_reset_handler(ioc
,
2292 rc
= (!rc
) ? SUCCESS
: FAILED
;
2297 /* sync IRQs in case those were busy during flush. */
2298 mpt3sas_base_sync_reply_irqs(ioc
);
2300 if (ioc
->tm_cmds
.status
& MPT3_CMD_REPLY_VALID
) {
2301 mpt3sas_trigger_master(ioc
, MASTER_TRIGGER_TASK_MANAGMENT
);
2302 mpi_reply
= ioc
->tm_cmds
.reply
;
2303 dtmprintk(ioc
, pr_info(MPT3SAS_FMT
"complete tm: " \
2304 "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
2305 ioc
->name
, le16_to_cpu(mpi_reply
->IOCStatus
),
2306 le32_to_cpu(mpi_reply
->IOCLogInfo
),
2307 le32_to_cpu(mpi_reply
->TerminationCount
)));
2308 if (ioc
->logging_level
& MPT_DEBUG_TM
) {
2309 _scsih_response_code(ioc
, mpi_reply
->ResponseCode
);
2310 if (mpi_reply
->IOCStatus
)
2311 _debug_dump_mf(mpi_request
,
2312 sizeof(Mpi2SCSITaskManagementRequest_t
)/4);
2317 case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK
:
2319 if (scsi_lookup
->scmd
== NULL
)
2324 case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET
:
2325 if (_scsih_scsi_lookup_find_by_target(ioc
, id
, channel
))
2330 case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET
:
2331 case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET
:
2332 if (_scsih_scsi_lookup_find_by_lun(ioc
, id
, lun
, channel
))
2337 case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK
:
2346 mpt3sas_scsih_clear_tm_flag(ioc
, handle
);
2347 ioc
->tm_cmds
.status
= MPT3_CMD_NOT_USED
;
2351 int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
,
2352 uint channel
, uint id
, uint lun
, u8 type
, u16 smid_task
, ulong timeout
)
2356 mutex_lock(&ioc
->tm_cmds
.mutex
);
2357 ret
= mpt3sas_scsih_issue_tm(ioc
, handle
, channel
, id
, lun
, type
,
2358 smid_task
, timeout
);
2359 mutex_unlock(&ioc
->tm_cmds
.mutex
);
2365 * _scsih_tm_display_info - displays info about the device
2366 * @ioc: per adapter struct
2367 * @scmd: pointer to scsi command object
2369 * Called by task management callback handlers.
2372 _scsih_tm_display_info(struct MPT3SAS_ADAPTER
*ioc
, struct scsi_cmnd
*scmd
)
2374 struct scsi_target
*starget
= scmd
->device
->sdev_target
;
2375 struct MPT3SAS_TARGET
*priv_target
= starget
->hostdata
;
2376 struct _sas_device
*sas_device
= NULL
;
2377 unsigned long flags
;
2378 char *device_str
= NULL
;
2382 if (ioc
->hide_ir_msg
)
2383 device_str
= "WarpDrive";
2385 device_str
= "volume";
2387 scsi_print_command(scmd
);
2388 if (priv_target
->flags
& MPT_TARGET_FLAGS_VOLUME
) {
2389 starget_printk(KERN_INFO
, starget
,
2390 "%s handle(0x%04x), %s wwid(0x%016llx)\n",
2391 device_str
, priv_target
->handle
,
2392 device_str
, (unsigned long long)priv_target
->sas_address
);
2394 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
2395 sas_device
= __mpt3sas_get_sdev_from_target(ioc
, priv_target
);
2397 if (priv_target
->flags
&
2398 MPT_TARGET_FLAGS_RAID_COMPONENT
) {
2399 starget_printk(KERN_INFO
, starget
,
2400 "volume handle(0x%04x), "
2401 "volume wwid(0x%016llx)\n",
2402 sas_device
->volume_handle
,
2403 (unsigned long long)sas_device
->volume_wwid
);
2405 starget_printk(KERN_INFO
, starget
,
2406 "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
2408 (unsigned long long)sas_device
->sas_address
,
2410 if (sas_device
->enclosure_handle
!= 0)
2411 starget_printk(KERN_INFO
, starget
,
2412 "enclosure_logical_id(0x%016llx), slot(%d)\n",
2413 (unsigned long long)
2414 sas_device
->enclosure_logical_id
,
2416 if (sas_device
->connector_name
[0] != '\0')
2417 starget_printk(KERN_INFO
, starget
,
2418 "enclosure level(0x%04x),connector name(%s)\n",
2419 sas_device
->enclosure_level
,
2420 sas_device
->connector_name
);
2422 sas_device_put(sas_device
);
2424 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
2429 * scsih_abort - eh threads main abort routine
2430 * @scmd: pointer to scsi command object
2432 * Returns SUCCESS if command aborted else FAILED
2435 scsih_abort(struct scsi_cmnd
*scmd
)
2437 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(scmd
->device
->host
);
2438 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2443 sdev_printk(KERN_INFO
, scmd
->device
,
2444 "attempting task abort! scmd(%p)\n", scmd
);
2445 _scsih_tm_display_info(ioc
, scmd
);
2447 sas_device_priv_data
= scmd
->device
->hostdata
;
2448 if (!sas_device_priv_data
|| !sas_device_priv_data
->sas_target
) {
2449 sdev_printk(KERN_INFO
, scmd
->device
,
2450 "device been deleted! scmd(%p)\n", scmd
);
2451 scmd
->result
= DID_NO_CONNECT
<< 16;
2452 scmd
->scsi_done(scmd
);
2457 /* search for the command */
2458 smid
= _scsih_scsi_lookup_find_by_scmd(ioc
, scmd
);
2460 scmd
->result
= DID_RESET
<< 16;
2465 /* for hidden raid components and volumes this is not supported */
2466 if (sas_device_priv_data
->sas_target
->flags
&
2467 MPT_TARGET_FLAGS_RAID_COMPONENT
||
2468 sas_device_priv_data
->sas_target
->flags
& MPT_TARGET_FLAGS_VOLUME
) {
2469 scmd
->result
= DID_RESET
<< 16;
2474 mpt3sas_halt_firmware(ioc
);
2476 handle
= sas_device_priv_data
->sas_target
->handle
;
2477 r
= mpt3sas_scsih_issue_locked_tm(ioc
, handle
, scmd
->device
->channel
,
2478 scmd
->device
->id
, scmd
->device
->lun
,
2479 MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK
, smid
, 30);
2482 sdev_printk(KERN_INFO
, scmd
->device
, "task abort: %s scmd(%p)\n",
2483 ((r
== SUCCESS
) ? "SUCCESS" : "FAILED"), scmd
);
2488 * scsih_dev_reset - eh threads main device reset routine
2489 * @scmd: pointer to scsi command object
2491 * Returns SUCCESS if command aborted else FAILED
2494 scsih_dev_reset(struct scsi_cmnd
*scmd
)
2496 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(scmd
->device
->host
);
2497 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2498 struct _sas_device
*sas_device
= NULL
;
2502 struct scsi_target
*starget
= scmd
->device
->sdev_target
;
2503 struct MPT3SAS_TARGET
*target_priv_data
= starget
->hostdata
;
2505 sdev_printk(KERN_INFO
, scmd
->device
,
2506 "attempting device reset! scmd(%p)\n", scmd
);
2507 _scsih_tm_display_info(ioc
, scmd
);
2509 sas_device_priv_data
= scmd
->device
->hostdata
;
2510 if (!sas_device_priv_data
|| !sas_device_priv_data
->sas_target
) {
2511 sdev_printk(KERN_INFO
, scmd
->device
,
2512 "device been deleted! scmd(%p)\n", scmd
);
2513 scmd
->result
= DID_NO_CONNECT
<< 16;
2514 scmd
->scsi_done(scmd
);
2519 /* for hidden raid components obtain the volume_handle */
2521 if (sas_device_priv_data
->sas_target
->flags
&
2522 MPT_TARGET_FLAGS_RAID_COMPONENT
) {
2523 sas_device
= mpt3sas_get_sdev_from_target(ioc
,
2526 handle
= sas_device
->volume_handle
;
2528 handle
= sas_device_priv_data
->sas_target
->handle
;
2531 scmd
->result
= DID_RESET
<< 16;
2536 r
= mpt3sas_scsih_issue_locked_tm(ioc
, handle
, scmd
->device
->channel
,
2537 scmd
->device
->id
, scmd
->device
->lun
,
2538 MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET
, 0, 30);
2541 sdev_printk(KERN_INFO
, scmd
->device
, "device reset: %s scmd(%p)\n",
2542 ((r
== SUCCESS
) ? "SUCCESS" : "FAILED"), scmd
);
2545 sas_device_put(sas_device
);
2551 * scsih_target_reset - eh threads main target reset routine
2552 * @scmd: pointer to scsi command object
2554 * Returns SUCCESS if command aborted else FAILED
2557 scsih_target_reset(struct scsi_cmnd
*scmd
)
2559 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(scmd
->device
->host
);
2560 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2561 struct _sas_device
*sas_device
= NULL
;
2564 struct scsi_target
*starget
= scmd
->device
->sdev_target
;
2565 struct MPT3SAS_TARGET
*target_priv_data
= starget
->hostdata
;
2567 starget_printk(KERN_INFO
, starget
, "attempting target reset! scmd(%p)\n",
2569 _scsih_tm_display_info(ioc
, scmd
);
2571 sas_device_priv_data
= scmd
->device
->hostdata
;
2572 if (!sas_device_priv_data
|| !sas_device_priv_data
->sas_target
) {
2573 starget_printk(KERN_INFO
, starget
, "target been deleted! scmd(%p)\n",
2575 scmd
->result
= DID_NO_CONNECT
<< 16;
2576 scmd
->scsi_done(scmd
);
2581 /* for hidden raid components obtain the volume_handle */
2583 if (sas_device_priv_data
->sas_target
->flags
&
2584 MPT_TARGET_FLAGS_RAID_COMPONENT
) {
2585 sas_device
= mpt3sas_get_sdev_from_target(ioc
,
2588 handle
= sas_device
->volume_handle
;
2590 handle
= sas_device_priv_data
->sas_target
->handle
;
2593 scmd
->result
= DID_RESET
<< 16;
2598 r
= mpt3sas_scsih_issue_locked_tm(ioc
, handle
, scmd
->device
->channel
,
2599 scmd
->device
->id
, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET
, 0,
2603 starget_printk(KERN_INFO
, starget
, "target reset: %s scmd(%p)\n",
2604 ((r
== SUCCESS
) ? "SUCCESS" : "FAILED"), scmd
);
2607 sas_device_put(sas_device
);
2614 * scsih_host_reset - eh threads main host reset routine
2615 * @scmd: pointer to scsi command object
2617 * Returns SUCCESS if command aborted else FAILED
2620 scsih_host_reset(struct scsi_cmnd
*scmd
)
2622 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(scmd
->device
->host
);
2625 pr_info(MPT3SAS_FMT
"attempting host reset! scmd(%p)\n",
2627 scsi_print_command(scmd
);
2629 if (ioc
->is_driver_loading
) {
2630 pr_info(MPT3SAS_FMT
"Blocking the host reset\n",
2636 retval
= mpt3sas_base_hard_reset_handler(ioc
, FORCE_BIG_HAMMER
);
2637 r
= (retval
< 0) ? FAILED
: SUCCESS
;
2639 pr_info(MPT3SAS_FMT
"host reset: %s scmd(%p)\n",
2640 ioc
->name
, ((r
== SUCCESS
) ? "SUCCESS" : "FAILED"), scmd
);
2646 * _scsih_fw_event_add - insert and queue up fw_event
2647 * @ioc: per adapter object
2648 * @fw_event: object describing the event
2649 * Context: This function will acquire ioc->fw_event_lock.
2651 * This adds the firmware event object into link list, then queues it up to
2652 * be processed from user context.
2657 _scsih_fw_event_add(struct MPT3SAS_ADAPTER
*ioc
, struct fw_event_work
*fw_event
)
2659 unsigned long flags
;
2661 if (ioc
->firmware_event_thread
== NULL
)
2664 spin_lock_irqsave(&ioc
->fw_event_lock
, flags
);
2665 fw_event_work_get(fw_event
);
2666 INIT_LIST_HEAD(&fw_event
->list
);
2667 list_add_tail(&fw_event
->list
, &ioc
->fw_event_list
);
2668 INIT_WORK(&fw_event
->work
, _firmware_event_work
);
2669 fw_event_work_get(fw_event
);
2670 queue_work(ioc
->firmware_event_thread
, &fw_event
->work
);
2671 spin_unlock_irqrestore(&ioc
->fw_event_lock
, flags
);
2675 * _scsih_fw_event_del_from_list - delete fw_event from the list
2676 * @ioc: per adapter object
2677 * @fw_event: object describing the event
2678 * Context: This function will acquire ioc->fw_event_lock.
2680 * If the fw_event is on the fw_event_list, remove it and do a put.
2685 _scsih_fw_event_del_from_list(struct MPT3SAS_ADAPTER
*ioc
, struct fw_event_work
2688 unsigned long flags
;
2690 spin_lock_irqsave(&ioc
->fw_event_lock
, flags
);
2691 if (!list_empty(&fw_event
->list
)) {
2692 list_del_init(&fw_event
->list
);
2693 fw_event_work_put(fw_event
);
2695 spin_unlock_irqrestore(&ioc
->fw_event_lock
, flags
);
2700 * mpt3sas_send_trigger_data_event - send event for processing trigger data
2701 * @ioc: per adapter object
2702 * @event_data: trigger event data
2707 mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER
*ioc
,
2708 struct SL_WH_TRIGGERS_EVENT_DATA_T
*event_data
)
2710 struct fw_event_work
*fw_event
;
2713 if (ioc
->is_driver_loading
)
2715 sz
= sizeof(*event_data
);
2716 fw_event
= alloc_fw_event_work(sz
);
2719 fw_event
->event
= MPT3SAS_PROCESS_TRIGGER_DIAG
;
2720 fw_event
->ioc
= ioc
;
2721 memcpy(fw_event
->event_data
, event_data
, sizeof(*event_data
));
2722 _scsih_fw_event_add(ioc
, fw_event
);
2723 fw_event_work_put(fw_event
);
2727 * _scsih_error_recovery_delete_devices - remove devices not responding
2728 * @ioc: per adapter object
2733 _scsih_error_recovery_delete_devices(struct MPT3SAS_ADAPTER
*ioc
)
2735 struct fw_event_work
*fw_event
;
2737 if (ioc
->is_driver_loading
)
2739 fw_event
= alloc_fw_event_work(0);
2742 fw_event
->event
= MPT3SAS_REMOVE_UNRESPONDING_DEVICES
;
2743 fw_event
->ioc
= ioc
;
2744 _scsih_fw_event_add(ioc
, fw_event
);
2745 fw_event_work_put(fw_event
);
2749 * mpt3sas_port_enable_complete - port enable completed (fake event)
2750 * @ioc: per adapter object
2755 mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER
*ioc
)
2757 struct fw_event_work
*fw_event
;
2759 fw_event
= alloc_fw_event_work(0);
2762 fw_event
->event
= MPT3SAS_PORT_ENABLE_COMPLETE
;
2763 fw_event
->ioc
= ioc
;
2764 _scsih_fw_event_add(ioc
, fw_event
);
2765 fw_event_work_put(fw_event
);
2768 static struct fw_event_work
*dequeue_next_fw_event(struct MPT3SAS_ADAPTER
*ioc
)
2770 unsigned long flags
;
2771 struct fw_event_work
*fw_event
= NULL
;
2773 spin_lock_irqsave(&ioc
->fw_event_lock
, flags
);
2774 if (!list_empty(&ioc
->fw_event_list
)) {
2775 fw_event
= list_first_entry(&ioc
->fw_event_list
,
2776 struct fw_event_work
, list
);
2777 list_del_init(&fw_event
->list
);
2779 spin_unlock_irqrestore(&ioc
->fw_event_lock
, flags
);
2785 * _scsih_fw_event_cleanup_queue - cleanup event queue
2786 * @ioc: per adapter object
2788 * Walk the firmware event queue, either killing timers, or waiting
2789 * for outstanding events to complete
2794 _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER
*ioc
)
2796 struct fw_event_work
*fw_event
;
2798 if (list_empty(&ioc
->fw_event_list
) ||
2799 !ioc
->firmware_event_thread
|| in_interrupt())
2802 while ((fw_event
= dequeue_next_fw_event(ioc
))) {
2804 * Wait on the fw_event to complete. If this returns 1, then
2805 * the event was never executed, and we need a put for the
2806 * reference the work had on the fw_event.
2808 * If it did execute, we wait for it to finish, and the put will
2809 * happen from _firmware_event_work()
2811 if (cancel_work_sync(&fw_event
->work
))
2812 fw_event_work_put(fw_event
);
2814 fw_event_work_put(fw_event
);
2819 * _scsih_internal_device_block - block the sdev device
2820 * @sdev: per device object
2821 * @sas_device_priv_data : per device driver private data
2823 * make sure device is blocked without error, if not
2827 _scsih_internal_device_block(struct scsi_device
*sdev
,
2828 struct MPT3SAS_DEVICE
*sas_device_priv_data
)
2832 sdev_printk(KERN_INFO
, sdev
, "device_block, handle(0x%04x)\n",
2833 sas_device_priv_data
->sas_target
->handle
);
2834 sas_device_priv_data
->block
= 1;
2836 r
= scsi_internal_device_block(sdev
);
2838 sdev_printk(KERN_WARNING
, sdev
,
2839 "device_block failed with return(%d) for handle(0x%04x)\n",
2840 sas_device_priv_data
->sas_target
->handle
, r
);
2844 * _scsih_internal_device_unblock - unblock the sdev device
2845 * @sdev: per device object
2846 * @sas_device_priv_data : per device driver private data
2847 * make sure device is unblocked without error, if not retry
2848 * by blocking and then unblocking
2852 _scsih_internal_device_unblock(struct scsi_device
*sdev
,
2853 struct MPT3SAS_DEVICE
*sas_device_priv_data
)
2857 sdev_printk(KERN_WARNING
, sdev
, "device_unblock and setting to running, "
2858 "handle(0x%04x)\n", sas_device_priv_data
->sas_target
->handle
);
2859 sas_device_priv_data
->block
= 0;
2860 r
= scsi_internal_device_unblock(sdev
, SDEV_RUNNING
);
2862 /* The device has been set to SDEV_RUNNING by SD layer during
2863 * device addition but the request queue is still stopped by
2864 * our earlier block call. We need to perform a block again
2865 * to get the device to SDEV_BLOCK and then to SDEV_RUNNING */
2867 sdev_printk(KERN_WARNING
, sdev
,
2868 "device_unblock failed with return(%d) for handle(0x%04x) "
2869 "performing a block followed by an unblock\n",
2870 sas_device_priv_data
->sas_target
->handle
, r
);
2871 sas_device_priv_data
->block
= 1;
2872 r
= scsi_internal_device_block(sdev
);
2874 sdev_printk(KERN_WARNING
, sdev
, "retried device_block "
2875 "failed with return(%d) for handle(0x%04x)\n",
2876 sas_device_priv_data
->sas_target
->handle
, r
);
2878 sas_device_priv_data
->block
= 0;
2879 r
= scsi_internal_device_unblock(sdev
, SDEV_RUNNING
);
2881 sdev_printk(KERN_WARNING
, sdev
, "retried device_unblock"
2882 " failed with return(%d) for handle(0x%04x)\n",
2883 sas_device_priv_data
->sas_target
->handle
, r
);
2888 * _scsih_ublock_io_all_device - unblock every device
2889 * @ioc: per adapter object
2891 * change the device state from block to running
2894 _scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER
*ioc
)
2896 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2897 struct scsi_device
*sdev
;
2899 shost_for_each_device(sdev
, ioc
->shost
) {
2900 sas_device_priv_data
= sdev
->hostdata
;
2901 if (!sas_device_priv_data
)
2903 if (!sas_device_priv_data
->block
)
2906 dewtprintk(ioc
, sdev_printk(KERN_INFO
, sdev
,
2907 "device_running, handle(0x%04x)\n",
2908 sas_device_priv_data
->sas_target
->handle
));
2909 _scsih_internal_device_unblock(sdev
, sas_device_priv_data
);
2915 * _scsih_ublock_io_device - prepare device to be deleted
2916 * @ioc: per adapter object
2917 * @sas_addr: sas address
2919 * unblock then put device in offline state
2922 _scsih_ublock_io_device(struct MPT3SAS_ADAPTER
*ioc
, u64 sas_address
)
2924 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2925 struct scsi_device
*sdev
;
2927 shost_for_each_device(sdev
, ioc
->shost
) {
2928 sas_device_priv_data
= sdev
->hostdata
;
2929 if (!sas_device_priv_data
)
2931 if (sas_device_priv_data
->sas_target
->sas_address
2934 if (sas_device_priv_data
->block
)
2935 _scsih_internal_device_unblock(sdev
,
2936 sas_device_priv_data
);
2941 * _scsih_block_io_all_device - set the device state to SDEV_BLOCK
2942 * @ioc: per adapter object
2943 * @handle: device handle
2945 * During device pull we need to appropiately set the sdev state.
2948 _scsih_block_io_all_device(struct MPT3SAS_ADAPTER
*ioc
)
2950 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2951 struct scsi_device
*sdev
;
2953 shost_for_each_device(sdev
, ioc
->shost
) {
2954 sas_device_priv_data
= sdev
->hostdata
;
2955 if (!sas_device_priv_data
)
2957 if (sas_device_priv_data
->block
)
2959 if (sas_device_priv_data
->ignore_delay_remove
) {
2960 sdev_printk(KERN_INFO
, sdev
,
2961 "%s skip device_block for SES handle(0x%04x)\n",
2962 __func__
, sas_device_priv_data
->sas_target
->handle
);
2965 _scsih_internal_device_block(sdev
, sas_device_priv_data
);
2970 * _scsih_block_io_device - set the device state to SDEV_BLOCK
2971 * @ioc: per adapter object
2972 * @handle: device handle
2974 * During device pull we need to appropiately set the sdev state.
2977 _scsih_block_io_device(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
2979 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
2980 struct scsi_device
*sdev
;
2981 struct _sas_device
*sas_device
;
2983 sas_device
= mpt3sas_get_sdev_by_handle(ioc
, handle
);
2987 shost_for_each_device(sdev
, ioc
->shost
) {
2988 sas_device_priv_data
= sdev
->hostdata
;
2989 if (!sas_device_priv_data
)
2991 if (sas_device_priv_data
->sas_target
->handle
!= handle
)
2993 if (sas_device_priv_data
->block
)
2995 if (sas_device
->pend_sas_rphy_add
)
2997 if (sas_device_priv_data
->ignore_delay_remove
) {
2998 sdev_printk(KERN_INFO
, sdev
,
2999 "%s skip device_block for SES handle(0x%04x)\n",
3000 __func__
, sas_device_priv_data
->sas_target
->handle
);
3003 _scsih_internal_device_block(sdev
, sas_device_priv_data
);
3006 sas_device_put(sas_device
);
3010 * _scsih_block_io_to_children_attached_to_ex
3011 * @ioc: per adapter object
3012 * @sas_expander: the sas_device object
3014 * This routine set sdev state to SDEV_BLOCK for all devices
3015 * attached to this expander. This function called when expander is
3019 _scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER
*ioc
,
3020 struct _sas_node
*sas_expander
)
3022 struct _sas_port
*mpt3sas_port
;
3023 struct _sas_device
*sas_device
;
3024 struct _sas_node
*expander_sibling
;
3025 unsigned long flags
;
3030 list_for_each_entry(mpt3sas_port
,
3031 &sas_expander
->sas_port_list
, port_list
) {
3032 if (mpt3sas_port
->remote_identify
.device_type
==
3034 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
3035 sas_device
= __mpt3sas_get_sdev_by_addr(ioc
,
3036 mpt3sas_port
->remote_identify
.sas_address
);
3038 set_bit(sas_device
->handle
,
3039 ioc
->blocking_handles
);
3040 sas_device_put(sas_device
);
3042 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
3046 list_for_each_entry(mpt3sas_port
,
3047 &sas_expander
->sas_port_list
, port_list
) {
3049 if (mpt3sas_port
->remote_identify
.device_type
==
3050 SAS_EDGE_EXPANDER_DEVICE
||
3051 mpt3sas_port
->remote_identify
.device_type
==
3052 SAS_FANOUT_EXPANDER_DEVICE
) {
3054 mpt3sas_scsih_expander_find_by_sas_address(
3055 ioc
, mpt3sas_port
->remote_identify
.sas_address
);
3056 _scsih_block_io_to_children_attached_to_ex(ioc
,
3063 * _scsih_block_io_to_children_attached_directly
3064 * @ioc: per adapter object
3065 * @event_data: topology change event data
3067 * This routine set sdev state to SDEV_BLOCK for all devices
3068 * direct attached during device pull.
3071 _scsih_block_io_to_children_attached_directly(struct MPT3SAS_ADAPTER
*ioc
,
3072 Mpi2EventDataSasTopologyChangeList_t
*event_data
)
3078 for (i
= 0; i
< event_data
->NumEntries
; i
++) {
3079 handle
= le16_to_cpu(event_data
->PHY
[i
].AttachedDevHandle
);
3082 reason_code
= event_data
->PHY
[i
].PhyStatus
&
3083 MPI2_EVENT_SAS_TOPO_RC_MASK
;
3084 if (reason_code
== MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING
)
3085 _scsih_block_io_device(ioc
, handle
);
3090 * _scsih_tm_tr_send - send task management request
3091 * @ioc: per adapter object
3092 * @handle: device handle
3093 * Context: interrupt time.
3095 * This code is to initiate the device removal handshake protocol
3096 * with controller firmware. This function will issue target reset
3097 * using high priority request queue. It will send a sas iounit
3098 * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
3100 * This is designed to send muliple task management request at the same
3101 * time to the fifo. If the fifo is full, we will append the request,
3102 * and process it in a future completion.
3105 _scsih_tm_tr_send(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
3107 Mpi2SCSITaskManagementRequest_t
*mpi_request
;
3109 struct _sas_device
*sas_device
= NULL
;
3110 struct MPT3SAS_TARGET
*sas_target_priv_data
= NULL
;
3111 u64 sas_address
= 0;
3112 unsigned long flags
;
3113 struct _tr_list
*delayed_tr
;
3116 if (ioc
->remove_host
) {
3117 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3118 "%s: host has been removed: handle(0x%04x)\n",
3119 __func__
, ioc
->name
, handle
));
3121 } else if (ioc
->pci_error_recovery
) {
3122 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3123 "%s: host in pci error recovery: handle(0x%04x)\n",
3124 __func__
, ioc
->name
,
3128 ioc_state
= mpt3sas_base_get_iocstate(ioc
, 1);
3129 if (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
3130 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3131 "%s: host is not operational: handle(0x%04x)\n",
3132 __func__
, ioc
->name
,
3137 /* if PD, then return */
3138 if (test_bit(handle
, ioc
->pd_handles
))
3141 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
3142 sas_device
= __mpt3sas_get_sdev_by_handle(ioc
, handle
);
3143 if (sas_device
&& sas_device
->starget
&&
3144 sas_device
->starget
->hostdata
) {
3145 sas_target_priv_data
= sas_device
->starget
->hostdata
;
3146 sas_target_priv_data
->deleted
= 1;
3147 sas_address
= sas_device
->sas_address
;
3149 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
3151 if (sas_target_priv_data
) {
3152 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3153 "setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
3155 (unsigned long long)sas_address
));
3156 if (sas_device
->enclosure_handle
!= 0)
3157 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3158 "setting delete flag:enclosure logical id(0x%016llx),"
3159 " slot(%d)\n", ioc
->name
, (unsigned long long)
3160 sas_device
->enclosure_logical_id
,
3162 if (sas_device
->connector_name
[0] != '\0')
3163 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3164 "setting delete flag: enclosure level(0x%04x),"
3165 " connector name( %s)\n", ioc
->name
,
3166 sas_device
->enclosure_level
,
3167 sas_device
->connector_name
));
3168 _scsih_ublock_io_device(ioc
, sas_address
);
3169 sas_target_priv_data
->handle
= MPT3SAS_INVALID_DEVICE_HANDLE
;
3172 smid
= mpt3sas_base_get_smid_hpr(ioc
, ioc
->tm_tr_cb_idx
);
3174 delayed_tr
= kzalloc(sizeof(*delayed_tr
), GFP_ATOMIC
);
3177 INIT_LIST_HEAD(&delayed_tr
->list
);
3178 delayed_tr
->handle
= handle
;
3179 list_add_tail(&delayed_tr
->list
, &ioc
->delayed_tr_list
);
3180 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3181 "DELAYED:tr:handle(0x%04x), (open)\n",
3182 ioc
->name
, handle
));
3186 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3187 "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
3188 ioc
->name
, handle
, smid
,
3189 ioc
->tm_tr_cb_idx
));
3190 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
3191 memset(mpi_request
, 0, sizeof(Mpi2SCSITaskManagementRequest_t
));
3192 mpi_request
->Function
= MPI2_FUNCTION_SCSI_TASK_MGMT
;
3193 mpi_request
->DevHandle
= cpu_to_le16(handle
);
3194 mpi_request
->TaskType
= MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET
;
3195 mpt3sas_base_put_smid_hi_priority(ioc
, smid
, 0);
3196 mpt3sas_trigger_master(ioc
, MASTER_TRIGGER_DEVICE_REMOVAL
);
3200 sas_device_put(sas_device
);
3204 * _scsih_tm_tr_complete -
3205 * @ioc: per adapter object
3206 * @smid: system request message index
3207 * @msix_index: MSIX table index supplied by the OS
3208 * @reply: reply message frame(lower 32bit addr)
3209 * Context: interrupt time.
3211 * This is the target reset completion routine.
3212 * This code is part of the code to initiate the device removal
3213 * handshake protocol with controller firmware.
3214 * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
3216 * Return 1 meaning mf should be freed from _base_interrupt
3217 * 0 means the mf is freed from this function.
3220 _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
3224 Mpi2SCSITaskManagementRequest_t
*mpi_request_tm
;
3225 Mpi2SCSITaskManagementReply_t
*mpi_reply
=
3226 mpt3sas_base_get_reply_virt_addr(ioc
, reply
);
3227 Mpi2SasIoUnitControlRequest_t
*mpi_request
;
3230 struct _sc_list
*delayed_sc
;
3232 if (ioc
->remove_host
) {
3233 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3234 "%s: host has been removed\n", __func__
, ioc
->name
));
3236 } else if (ioc
->pci_error_recovery
) {
3237 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3238 "%s: host in pci error recovery\n", __func__
,
3242 ioc_state
= mpt3sas_base_get_iocstate(ioc
, 1);
3243 if (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
3244 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3245 "%s: host is not operational\n", __func__
, ioc
->name
));
3248 if (unlikely(!mpi_reply
)) {
3249 pr_err(MPT3SAS_FMT
"mpi_reply not valid at %s:%d/%s()!\n",
3250 ioc
->name
, __FILE__
, __LINE__
, __func__
);
3253 mpi_request_tm
= mpt3sas_base_get_msg_frame(ioc
, smid
);
3254 handle
= le16_to_cpu(mpi_request_tm
->DevHandle
);
3255 if (handle
!= le16_to_cpu(mpi_reply
->DevHandle
)) {
3256 dewtprintk(ioc
, pr_err(MPT3SAS_FMT
3257 "spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
3259 le16_to_cpu(mpi_reply
->DevHandle
), smid
));
3263 mpt3sas_trigger_master(ioc
, MASTER_TRIGGER_TASK_MANAGMENT
);
3264 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3265 "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
3266 "loginfo(0x%08x), completed(%d)\n", ioc
->name
,
3267 handle
, smid
, le16_to_cpu(mpi_reply
->IOCStatus
),
3268 le32_to_cpu(mpi_reply
->IOCLogInfo
),
3269 le32_to_cpu(mpi_reply
->TerminationCount
)));
3271 smid_sas_ctrl
= mpt3sas_base_get_smid(ioc
, ioc
->tm_sas_control_cb_idx
);
3272 if (!smid_sas_ctrl
) {
3273 delayed_sc
= kzalloc(sizeof(*delayed_sc
), GFP_ATOMIC
);
3275 return _scsih_check_for_pending_tm(ioc
, smid
);
3276 INIT_LIST_HEAD(&delayed_sc
->list
);
3277 delayed_sc
->handle
= mpi_request_tm
->DevHandle
;
3278 list_add_tail(&delayed_sc
->list
, &ioc
->delayed_sc_list
);
3279 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3280 "DELAYED:sc:handle(0x%04x), (open)\n",
3281 ioc
->name
, handle
));
3282 return _scsih_check_for_pending_tm(ioc
, smid
);
3285 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3286 "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
3287 ioc
->name
, handle
, smid_sas_ctrl
,
3288 ioc
->tm_sas_control_cb_idx
));
3289 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid_sas_ctrl
);
3290 memset(mpi_request
, 0, sizeof(Mpi2SasIoUnitControlRequest_t
));
3291 mpi_request
->Function
= MPI2_FUNCTION_SAS_IO_UNIT_CONTROL
;
3292 mpi_request
->Operation
= MPI2_SAS_OP_REMOVE_DEVICE
;
3293 mpi_request
->DevHandle
= mpi_request_tm
->DevHandle
;
3294 mpt3sas_base_put_smid_default(ioc
, smid_sas_ctrl
);
3296 return _scsih_check_for_pending_tm(ioc
, smid
);
3301 * _scsih_sas_control_complete - completion routine
3302 * @ioc: per adapter object
3303 * @smid: system request message index
3304 * @msix_index: MSIX table index supplied by the OS
3305 * @reply: reply message frame(lower 32bit addr)
3306 * Context: interrupt time.
3308 * This is the sas iounit control completion routine.
3309 * This code is part of the code to initiate the device removal
3310 * handshake protocol with controller firmware.
3312 * Return 1 meaning mf should be freed from _base_interrupt
3313 * 0 means the mf is freed from this function.
3316 _scsih_sas_control_complete(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
,
3317 u8 msix_index
, u32 reply
)
3319 Mpi2SasIoUnitControlReply_t
*mpi_reply
=
3320 mpt3sas_base_get_reply_virt_addr(ioc
, reply
);
3322 if (likely(mpi_reply
)) {
3323 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3324 "sc_complete:handle(0x%04x), (open) "
3325 "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
3326 ioc
->name
, le16_to_cpu(mpi_reply
->DevHandle
), smid
,
3327 le16_to_cpu(mpi_reply
->IOCStatus
),
3328 le32_to_cpu(mpi_reply
->IOCLogInfo
)));
3330 pr_err(MPT3SAS_FMT
"mpi_reply not valid at %s:%d/%s()!\n",
3331 ioc
->name
, __FILE__
, __LINE__
, __func__
);
3333 return mpt3sas_check_for_pending_internal_cmds(ioc
, smid
);
3337 * _scsih_tm_tr_volume_send - send target reset request for volumes
3338 * @ioc: per adapter object
3339 * @handle: device handle
3340 * Context: interrupt time.
3342 * This is designed to send muliple task management request at the same
3343 * time to the fifo. If the fifo is full, we will append the request,
3344 * and process it in a future completion.
3347 _scsih_tm_tr_volume_send(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
3349 Mpi2SCSITaskManagementRequest_t
*mpi_request
;
3351 struct _tr_list
*delayed_tr
;
3353 if (ioc
->shost_recovery
|| ioc
->remove_host
||
3354 ioc
->pci_error_recovery
) {
3355 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3356 "%s: host reset in progress!\n",
3357 __func__
, ioc
->name
));
3361 smid
= mpt3sas_base_get_smid_hpr(ioc
, ioc
->tm_tr_volume_cb_idx
);
3363 delayed_tr
= kzalloc(sizeof(*delayed_tr
), GFP_ATOMIC
);
3366 INIT_LIST_HEAD(&delayed_tr
->list
);
3367 delayed_tr
->handle
= handle
;
3368 list_add_tail(&delayed_tr
->list
, &ioc
->delayed_tr_volume_list
);
3369 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3370 "DELAYED:tr:handle(0x%04x), (open)\n",
3371 ioc
->name
, handle
));
3375 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3376 "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
3377 ioc
->name
, handle
, smid
,
3378 ioc
->tm_tr_volume_cb_idx
));
3379 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
3380 memset(mpi_request
, 0, sizeof(Mpi2SCSITaskManagementRequest_t
));
3381 mpi_request
->Function
= MPI2_FUNCTION_SCSI_TASK_MGMT
;
3382 mpi_request
->DevHandle
= cpu_to_le16(handle
);
3383 mpi_request
->TaskType
= MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET
;
3384 mpt3sas_base_put_smid_hi_priority(ioc
, smid
, 0);
3388 * _scsih_tm_volume_tr_complete - target reset completion
3389 * @ioc: per adapter object
3390 * @smid: system request message index
3391 * @msix_index: MSIX table index supplied by the OS
3392 * @reply: reply message frame(lower 32bit addr)
3393 * Context: interrupt time.
3395 * Return 1 meaning mf should be freed from _base_interrupt
3396 * 0 means the mf is freed from this function.
3399 _scsih_tm_volume_tr_complete(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
,
3400 u8 msix_index
, u32 reply
)
3403 Mpi2SCSITaskManagementRequest_t
*mpi_request_tm
;
3404 Mpi2SCSITaskManagementReply_t
*mpi_reply
=
3405 mpt3sas_base_get_reply_virt_addr(ioc
, reply
);
3407 if (ioc
->shost_recovery
|| ioc
->remove_host
||
3408 ioc
->pci_error_recovery
) {
3409 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3410 "%s: host reset in progress!\n",
3411 __func__
, ioc
->name
));
3414 if (unlikely(!mpi_reply
)) {
3415 pr_err(MPT3SAS_FMT
"mpi_reply not valid at %s:%d/%s()!\n",
3416 ioc
->name
, __FILE__
, __LINE__
, __func__
);
3420 mpi_request_tm
= mpt3sas_base_get_msg_frame(ioc
, smid
);
3421 handle
= le16_to_cpu(mpi_request_tm
->DevHandle
);
3422 if (handle
!= le16_to_cpu(mpi_reply
->DevHandle
)) {
3423 dewtprintk(ioc
, pr_err(MPT3SAS_FMT
3424 "spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
3426 le16_to_cpu(mpi_reply
->DevHandle
), smid
));
3430 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3431 "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
3432 "loginfo(0x%08x), completed(%d)\n", ioc
->name
,
3433 handle
, smid
, le16_to_cpu(mpi_reply
->IOCStatus
),
3434 le32_to_cpu(mpi_reply
->IOCLogInfo
),
3435 le32_to_cpu(mpi_reply
->TerminationCount
)));
3437 return _scsih_check_for_pending_tm(ioc
, smid
);
3441 * _scsih_issue_delayed_event_ack - issue delayed Event ACK messages
3442 * @ioc: per adapter object
3443 * @smid: system request message index
3445 * @event_context: used to track events uniquely
3447 * Context - processed in interrupt context.
3450 _scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
, u16 event
,
3453 Mpi2EventAckRequest_t
*ack_request
;
3454 int i
= smid
- ioc
->internal_smid
;
3455 unsigned long flags
;
3457 /* Without releasing the smid just update the
3458 * call back index and reuse the same smid for
3459 * processing this delayed request
3461 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
3462 ioc
->internal_lookup
[i
].cb_idx
= ioc
->base_cb_idx
;
3463 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
3465 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3466 "EVENT ACK: event(0x%04x), smid(%d), cb(%d)\n",
3467 ioc
->name
, le16_to_cpu(event
), smid
,
3469 ack_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
3470 memset(ack_request
, 0, sizeof(Mpi2EventAckRequest_t
));
3471 ack_request
->Function
= MPI2_FUNCTION_EVENT_ACK
;
3472 ack_request
->Event
= event
;
3473 ack_request
->EventContext
= event_context
;
3474 ack_request
->VF_ID
= 0; /* TODO */
3475 ack_request
->VP_ID
= 0;
3476 mpt3sas_base_put_smid_default(ioc
, smid
);
3480 * _scsih_issue_delayed_sas_io_unit_ctrl - issue delayed
3481 * sas_io_unit_ctrl messages
3482 * @ioc: per adapter object
3483 * @smid: system request message index
3484 * @handle: device handle
3486 * Context - processed in interrupt context.
3489 _scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER
*ioc
,
3490 u16 smid
, u16 handle
)
3492 Mpi2SasIoUnitControlRequest_t
*mpi_request
;
3494 int i
= smid
- ioc
->internal_smid
;
3495 unsigned long flags
;
3497 if (ioc
->remove_host
) {
3498 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3499 "%s: host has been removed\n",
3500 __func__
, ioc
->name
));
3502 } else if (ioc
->pci_error_recovery
) {
3503 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3504 "%s: host in pci error recovery\n",
3505 __func__
, ioc
->name
));
3508 ioc_state
= mpt3sas_base_get_iocstate(ioc
, 1);
3509 if (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
3510 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3511 "%s: host is not operational\n",
3512 __func__
, ioc
->name
));
3516 /* Without releasing the smid just update the
3517 * call back index and reuse the same smid for
3518 * processing this delayed request
3520 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
3521 ioc
->internal_lookup
[i
].cb_idx
= ioc
->tm_sas_control_cb_idx
;
3522 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
3524 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3525 "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
3526 ioc
->name
, le16_to_cpu(handle
), smid
,
3527 ioc
->tm_sas_control_cb_idx
));
3528 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
3529 memset(mpi_request
, 0, sizeof(Mpi2SasIoUnitControlRequest_t
));
3530 mpi_request
->Function
= MPI2_FUNCTION_SAS_IO_UNIT_CONTROL
;
3531 mpi_request
->Operation
= MPI2_SAS_OP_REMOVE_DEVICE
;
3532 mpi_request
->DevHandle
= handle
;
3533 mpt3sas_base_put_smid_default(ioc
, smid
);
3537 * _scsih_check_for_pending_internal_cmds - check for pending internal messages
3538 * @ioc: per adapter object
3539 * @smid: system request message index
3541 * Context: Executed in interrupt context
3543 * This will check delayed internal messages list, and process the
3546 * Return 1 meaning mf should be freed from _base_interrupt
3547 * 0 means the mf is freed from this function.
3550 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
)
3552 struct _sc_list
*delayed_sc
;
3553 struct _event_ack_list
*delayed_event_ack
;
3555 if (!list_empty(&ioc
->delayed_event_ack_list
)) {
3556 delayed_event_ack
= list_entry(ioc
->delayed_event_ack_list
.next
,
3557 struct _event_ack_list
, list
);
3558 _scsih_issue_delayed_event_ack(ioc
, smid
,
3559 delayed_event_ack
->Event
, delayed_event_ack
->EventContext
);
3560 list_del(&delayed_event_ack
->list
);
3561 kfree(delayed_event_ack
);
3565 if (!list_empty(&ioc
->delayed_sc_list
)) {
3566 delayed_sc
= list_entry(ioc
->delayed_sc_list
.next
,
3567 struct _sc_list
, list
);
3568 _scsih_issue_delayed_sas_io_unit_ctrl(ioc
, smid
,
3569 delayed_sc
->handle
);
3570 list_del(&delayed_sc
->list
);
3578 * _scsih_check_for_pending_tm - check for pending task management
3579 * @ioc: per adapter object
3580 * @smid: system request message index
3582 * This will check delayed target reset list, and feed the
3585 * Return 1 meaning mf should be freed from _base_interrupt
3586 * 0 means the mf is freed from this function.
3589 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
)
3591 struct _tr_list
*delayed_tr
;
3593 if (!list_empty(&ioc
->delayed_tr_volume_list
)) {
3594 delayed_tr
= list_entry(ioc
->delayed_tr_volume_list
.next
,
3595 struct _tr_list
, list
);
3596 mpt3sas_base_free_smid(ioc
, smid
);
3597 _scsih_tm_tr_volume_send(ioc
, delayed_tr
->handle
);
3598 list_del(&delayed_tr
->list
);
3603 if (!list_empty(&ioc
->delayed_tr_list
)) {
3604 delayed_tr
= list_entry(ioc
->delayed_tr_list
.next
,
3605 struct _tr_list
, list
);
3606 mpt3sas_base_free_smid(ioc
, smid
);
3607 _scsih_tm_tr_send(ioc
, delayed_tr
->handle
);
3608 list_del(&delayed_tr
->list
);
3617 * _scsih_check_topo_delete_events - sanity check on topo events
3618 * @ioc: per adapter object
3619 * @event_data: the event data payload
3621 * This routine added to better handle cable breaker.
3623 * This handles the case where driver receives multiple expander
3624 * add and delete events in a single shot. When there is a delete event
3625 * the routine will void any pending add events waiting in the event queue.
3630 _scsih_check_topo_delete_events(struct MPT3SAS_ADAPTER
*ioc
,
3631 Mpi2EventDataSasTopologyChangeList_t
*event_data
)
3633 struct fw_event_work
*fw_event
;
3634 Mpi2EventDataSasTopologyChangeList_t
*local_event_data
;
3635 u16 expander_handle
;
3636 struct _sas_node
*sas_expander
;
3637 unsigned long flags
;
3641 for (i
= 0 ; i
< event_data
->NumEntries
; i
++) {
3642 handle
= le16_to_cpu(event_data
->PHY
[i
].AttachedDevHandle
);
3645 reason_code
= event_data
->PHY
[i
].PhyStatus
&
3646 MPI2_EVENT_SAS_TOPO_RC_MASK
;
3647 if (reason_code
== MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING
)
3648 _scsih_tm_tr_send(ioc
, handle
);
3651 expander_handle
= le16_to_cpu(event_data
->ExpanderDevHandle
);
3652 if (expander_handle
< ioc
->sas_hba
.num_phys
) {
3653 _scsih_block_io_to_children_attached_directly(ioc
, event_data
);
3656 if (event_data
->ExpStatus
==
3657 MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING
) {
3658 /* put expander attached devices into blocking state */
3659 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
3660 sas_expander
= mpt3sas_scsih_expander_find_by_handle(ioc
,
3662 _scsih_block_io_to_children_attached_to_ex(ioc
, sas_expander
);
3663 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
3665 handle
= find_first_bit(ioc
->blocking_handles
,
3666 ioc
->facts
.MaxDevHandle
);
3667 if (handle
< ioc
->facts
.MaxDevHandle
)
3668 _scsih_block_io_device(ioc
, handle
);
3669 } while (test_and_clear_bit(handle
, ioc
->blocking_handles
));
3670 } else if (event_data
->ExpStatus
== MPI2_EVENT_SAS_TOPO_ES_RESPONDING
)
3671 _scsih_block_io_to_children_attached_directly(ioc
, event_data
);
3673 if (event_data
->ExpStatus
!= MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING
)
3676 /* mark ignore flag for pending events */
3677 spin_lock_irqsave(&ioc
->fw_event_lock
, flags
);
3678 list_for_each_entry(fw_event
, &ioc
->fw_event_list
, list
) {
3679 if (fw_event
->event
!= MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
||
3682 local_event_data
= (Mpi2EventDataSasTopologyChangeList_t
*)
3683 fw_event
->event_data
;
3684 if (local_event_data
->ExpStatus
==
3685 MPI2_EVENT_SAS_TOPO_ES_ADDED
||
3686 local_event_data
->ExpStatus
==
3687 MPI2_EVENT_SAS_TOPO_ES_RESPONDING
) {
3688 if (le16_to_cpu(local_event_data
->ExpanderDevHandle
) ==
3690 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3691 "setting ignoring flag\n", ioc
->name
));
3692 fw_event
->ignore
= 1;
3696 spin_unlock_irqrestore(&ioc
->fw_event_lock
, flags
);
3700 * _scsih_set_volume_delete_flag - setting volume delete flag
3701 * @ioc: per adapter object
3702 * @handle: device handle
3704 * This returns nothing.
3707 _scsih_set_volume_delete_flag(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
3709 struct _raid_device
*raid_device
;
3710 struct MPT3SAS_TARGET
*sas_target_priv_data
;
3711 unsigned long flags
;
3713 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
3714 raid_device
= mpt3sas_raid_device_find_by_handle(ioc
, handle
);
3715 if (raid_device
&& raid_device
->starget
&&
3716 raid_device
->starget
->hostdata
) {
3717 sas_target_priv_data
=
3718 raid_device
->starget
->hostdata
;
3719 sas_target_priv_data
->deleted
= 1;
3720 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3721 "setting delete flag: handle(0x%04x), "
3722 "wwid(0x%016llx)\n", ioc
->name
, handle
,
3723 (unsigned long long) raid_device
->wwid
));
3725 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
3729 * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
3730 * @handle: input handle
3731 * @a: handle for volume a
3732 * @b: handle for volume b
3734 * IR firmware only supports two raid volumes. The purpose of this
3735 * routine is to set the volume handle in either a or b. When the given
3736 * input handle is non-zero, or when a and b have not been set before.
3739 _scsih_set_volume_handle_for_tr(u16 handle
, u16
*a
, u16
*b
)
3741 if (!handle
|| handle
== *a
|| handle
== *b
)
3750 * _scsih_check_ir_config_unhide_events - check for UNHIDE events
3751 * @ioc: per adapter object
3752 * @event_data: the event data payload
3753 * Context: interrupt time.
3755 * This routine will send target reset to volume, followed by target
3756 * resets to the PDs. This is called when a PD has been removed, or
3757 * volume has been deleted or removed. When the target reset is sent
3758 * to volume, the PD target resets need to be queued to start upon
3759 * completion of the volume target reset.
3764 _scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER
*ioc
,
3765 Mpi2EventDataIrConfigChangeList_t
*event_data
)
3767 Mpi2EventIrConfigElement_t
*element
;
3769 u16 handle
, volume_handle
, a
, b
;
3770 struct _tr_list
*delayed_tr
;
3775 if (ioc
->is_warpdrive
)
3778 /* Volume Resets for Deleted or Removed */
3779 element
= (Mpi2EventIrConfigElement_t
*)&event_data
->ConfigElement
[0];
3780 for (i
= 0; i
< event_data
->NumElements
; i
++, element
++) {
3781 if (le32_to_cpu(event_data
->Flags
) &
3782 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG
)
3784 if (element
->ReasonCode
==
3785 MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED
||
3786 element
->ReasonCode
==
3787 MPI2_EVENT_IR_CHANGE_RC_REMOVED
) {
3788 volume_handle
= le16_to_cpu(element
->VolDevHandle
);
3789 _scsih_set_volume_delete_flag(ioc
, volume_handle
);
3790 _scsih_set_volume_handle_for_tr(volume_handle
, &a
, &b
);
3794 /* Volume Resets for UNHIDE events */
3795 element
= (Mpi2EventIrConfigElement_t
*)&event_data
->ConfigElement
[0];
3796 for (i
= 0; i
< event_data
->NumElements
; i
++, element
++) {
3797 if (le32_to_cpu(event_data
->Flags
) &
3798 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG
)
3800 if (element
->ReasonCode
== MPI2_EVENT_IR_CHANGE_RC_UNHIDE
) {
3801 volume_handle
= le16_to_cpu(element
->VolDevHandle
);
3802 _scsih_set_volume_handle_for_tr(volume_handle
, &a
, &b
);
3807 _scsih_tm_tr_volume_send(ioc
, a
);
3809 _scsih_tm_tr_volume_send(ioc
, b
);
3811 /* PD target resets */
3812 element
= (Mpi2EventIrConfigElement_t
*)&event_data
->ConfigElement
[0];
3813 for (i
= 0; i
< event_data
->NumElements
; i
++, element
++) {
3814 if (element
->ReasonCode
!= MPI2_EVENT_IR_CHANGE_RC_UNHIDE
)
3816 handle
= le16_to_cpu(element
->PhysDiskDevHandle
);
3817 volume_handle
= le16_to_cpu(element
->VolDevHandle
);
3818 clear_bit(handle
, ioc
->pd_handles
);
3820 _scsih_tm_tr_send(ioc
, handle
);
3821 else if (volume_handle
== a
|| volume_handle
== b
) {
3822 delayed_tr
= kzalloc(sizeof(*delayed_tr
), GFP_ATOMIC
);
3823 BUG_ON(!delayed_tr
);
3824 INIT_LIST_HEAD(&delayed_tr
->list
);
3825 delayed_tr
->handle
= handle
;
3826 list_add_tail(&delayed_tr
->list
, &ioc
->delayed_tr_list
);
3827 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
3828 "DELAYED:tr:handle(0x%04x), (open)\n", ioc
->name
,
3831 _scsih_tm_tr_send(ioc
, handle
);
3837 * _scsih_check_volume_delete_events - set delete flag for volumes
3838 * @ioc: per adapter object
3839 * @event_data: the event data payload
3840 * Context: interrupt time.
3842 * This will handle the case when the cable connected to entire volume is
3843 * pulled. We will take care of setting the deleted flag so normal IO will
3849 _scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER
*ioc
,
3850 Mpi2EventDataIrVolume_t
*event_data
)
3854 if (event_data
->ReasonCode
!= MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED
)
3856 state
= le32_to_cpu(event_data
->NewValue
);
3857 if (state
== MPI2_RAID_VOL_STATE_MISSING
|| state
==
3858 MPI2_RAID_VOL_STATE_FAILED
)
3859 _scsih_set_volume_delete_flag(ioc
,
3860 le16_to_cpu(event_data
->VolDevHandle
));
3864 * _scsih_temp_threshold_events - display temperature threshold exceeded events
3865 * @ioc: per adapter object
3866 * @event_data: the temp threshold event data
3867 * Context: interrupt time.
3872 _scsih_temp_threshold_events(struct MPT3SAS_ADAPTER
*ioc
,
3873 Mpi2EventDataTemperature_t
*event_data
)
3875 if (ioc
->temp_sensors_count
>= event_data
->SensorNum
) {
3876 pr_err(MPT3SAS_FMT
"Temperature Threshold flags %s%s%s%s"
3877 " exceeded for Sensor: %d !!!\n", ioc
->name
,
3878 ((le16_to_cpu(event_data
->Status
) & 0x1) == 1) ? "0 " : " ",
3879 ((le16_to_cpu(event_data
->Status
) & 0x2) == 2) ? "1 " : " ",
3880 ((le16_to_cpu(event_data
->Status
) & 0x4) == 4) ? "2 " : " ",
3881 ((le16_to_cpu(event_data
->Status
) & 0x8) == 8) ? "3 " : " ",
3882 event_data
->SensorNum
);
3883 pr_err(MPT3SAS_FMT
"Current Temp In Celsius: %d\n",
3884 ioc
->name
, event_data
->CurrentTemperature
);
3888 static inline bool ata_12_16_cmd(struct scsi_cmnd
*scmd
)
3890 return (scmd
->cmnd
[0] == ATA_12
|| scmd
->cmnd
[0] == ATA_16
);
3894 * _scsih_flush_running_cmds - completing outstanding commands.
3895 * @ioc: per adapter object
3897 * The flushing out of all pending scmd commands following host reset,
3898 * where all IO is dropped to the floor.
3903 _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER
*ioc
)
3905 struct scsi_cmnd
*scmd
;
3909 for (smid
= 1; smid
<= ioc
->scsiio_depth
; smid
++) {
3910 scmd
= _scsih_scsi_lookup_get_clear(ioc
, smid
);
3914 if (ata_12_16_cmd(scmd
))
3915 scsi_internal_device_unblock(scmd
->device
,
3917 mpt3sas_base_free_smid(ioc
, smid
);
3918 scsi_dma_unmap(scmd
);
3919 if (ioc
->pci_error_recovery
)
3920 scmd
->result
= DID_NO_CONNECT
<< 16;
3922 scmd
->result
= DID_RESET
<< 16;
3923 scmd
->scsi_done(scmd
);
3925 dtmprintk(ioc
, pr_info(MPT3SAS_FMT
"completing %d cmds\n",
3930 * _scsih_setup_eedp - setup MPI request for EEDP transfer
3931 * @ioc: per adapter object
3932 * @scmd: pointer to scsi command object
3933 * @mpi_request: pointer to the SCSI_IO reqest message frame
3935 * Supporting protection 1 and 3.
3940 _scsih_setup_eedp(struct MPT3SAS_ADAPTER
*ioc
, struct scsi_cmnd
*scmd
,
3941 Mpi2SCSIIORequest_t
*mpi_request
)
3944 unsigned char prot_op
= scsi_get_prot_op(scmd
);
3945 unsigned char prot_type
= scsi_get_prot_type(scmd
);
3946 Mpi25SCSIIORequest_t
*mpi_request_3v
=
3947 (Mpi25SCSIIORequest_t
*)mpi_request
;
3949 if (prot_type
== SCSI_PROT_DIF_TYPE0
|| prot_op
== SCSI_PROT_NORMAL
)
3952 if (prot_op
== SCSI_PROT_READ_STRIP
)
3953 eedp_flags
= MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP
;
3954 else if (prot_op
== SCSI_PROT_WRITE_INSERT
)
3955 eedp_flags
= MPI2_SCSIIO_EEDPFLAGS_INSERT_OP
;
3959 switch (prot_type
) {
3960 case SCSI_PROT_DIF_TYPE1
:
3961 case SCSI_PROT_DIF_TYPE2
:
3964 * enable ref/guard checking
3965 * auto increment ref tag
3967 eedp_flags
|= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG
|
3968 MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG
|
3969 MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD
;
3970 mpi_request
->CDB
.EEDP32
.PrimaryReferenceTag
=
3971 cpu_to_be32(scsi_prot_ref_tag(scmd
));
3974 case SCSI_PROT_DIF_TYPE3
:
3977 * enable guard checking
3979 eedp_flags
|= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD
;
3984 mpi_request_3v
->EEDPBlockSize
=
3985 cpu_to_le16(scmd
->device
->sector_size
);
3986 mpi_request
->EEDPFlags
= cpu_to_le16(eedp_flags
);
3990 * _scsih_eedp_error_handling - return sense code for EEDP errors
3991 * @scmd: pointer to scsi command object
3992 * @ioc_status: ioc status
3997 _scsih_eedp_error_handling(struct scsi_cmnd
*scmd
, u16 ioc_status
)
4001 switch (ioc_status
) {
4002 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR
:
4005 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR
:
4008 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR
:
4015 scsi_build_sense_buffer(0, scmd
->sense_buffer
, ILLEGAL_REQUEST
, 0x10,
4017 scmd
->result
= DRIVER_SENSE
<< 24 | (DID_ABORT
<< 16) |
4018 SAM_STAT_CHECK_CONDITION
;
4022 * scsih_qcmd - main scsi request entry point
4023 * @scmd: pointer to scsi command object
4024 * @done: function pointer to be invoked on completion
4026 * The callback index is set inside `ioc->scsi_io_cb_idx`.
4028 * Returns 0 on success. If there's a failure, return either:
4029 * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
4030 * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
4033 scsih_qcmd(struct Scsi_Host
*shost
, struct scsi_cmnd
*scmd
)
4035 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
4036 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
4037 struct MPT3SAS_TARGET
*sas_target_priv_data
;
4038 struct _raid_device
*raid_device
;
4039 Mpi2SCSIIORequest_t
*mpi_request
;
4044 if (ioc
->logging_level
& MPT_DEBUG_SCSI
)
4045 scsi_print_command(scmd
);
4048 * Lock the device for any subsequent command until command is
4051 if (ata_12_16_cmd(scmd
))
4052 scsi_internal_device_block(scmd
->device
);
4054 sas_device_priv_data
= scmd
->device
->hostdata
;
4055 if (!sas_device_priv_data
|| !sas_device_priv_data
->sas_target
) {
4056 scmd
->result
= DID_NO_CONNECT
<< 16;
4057 scmd
->scsi_done(scmd
);
4061 if (ioc
->pci_error_recovery
|| ioc
->remove_host
) {
4062 scmd
->result
= DID_NO_CONNECT
<< 16;
4063 scmd
->scsi_done(scmd
);
4067 sas_target_priv_data
= sas_device_priv_data
->sas_target
;
4069 /* invalid device handle */
4070 handle
= sas_target_priv_data
->handle
;
4071 if (handle
== MPT3SAS_INVALID_DEVICE_HANDLE
) {
4072 scmd
->result
= DID_NO_CONNECT
<< 16;
4073 scmd
->scsi_done(scmd
);
4078 /* host recovery or link resets sent via IOCTLs */
4079 if (ioc
->shost_recovery
|| ioc
->ioc_link_reset_in_progress
)
4080 return SCSI_MLQUEUE_HOST_BUSY
;
4082 /* device has been deleted */
4083 else if (sas_target_priv_data
->deleted
) {
4084 scmd
->result
= DID_NO_CONNECT
<< 16;
4085 scmd
->scsi_done(scmd
);
4087 /* device busy with task managment */
4088 } else if (sas_target_priv_data
->tm_busy
||
4089 sas_device_priv_data
->block
)
4090 return SCSI_MLQUEUE_DEVICE_BUSY
;
4092 if (scmd
->sc_data_direction
== DMA_FROM_DEVICE
)
4093 mpi_control
= MPI2_SCSIIO_CONTROL_READ
;
4094 else if (scmd
->sc_data_direction
== DMA_TO_DEVICE
)
4095 mpi_control
= MPI2_SCSIIO_CONTROL_WRITE
;
4097 mpi_control
= MPI2_SCSIIO_CONTROL_NODATATRANSFER
;
4100 mpi_control
|= MPI2_SCSIIO_CONTROL_SIMPLEQ
;
4102 /* Make sure Device is not raid volume.
4103 * We do not expose raid functionality to upper layer for warpdrive.
4105 if (!ioc
->is_warpdrive
&& !scsih_is_raid(&scmd
->device
->sdev_gendev
)
4106 && sas_is_tlr_enabled(scmd
->device
) && scmd
->cmd_len
!= 32)
4107 mpi_control
|= MPI2_SCSIIO_CONTROL_TLR_ON
;
4109 smid
= mpt3sas_base_get_smid_scsiio(ioc
, ioc
->scsi_io_cb_idx
, scmd
);
4111 pr_err(MPT3SAS_FMT
"%s: failed obtaining a smid\n",
4112 ioc
->name
, __func__
);
4115 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
4116 memset(mpi_request
, 0, sizeof(Mpi2SCSIIORequest_t
));
4117 _scsih_setup_eedp(ioc
, scmd
, mpi_request
);
4119 if (scmd
->cmd_len
== 32)
4120 mpi_control
|= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT
;
4121 mpi_request
->Function
= MPI2_FUNCTION_SCSI_IO_REQUEST
;
4122 if (sas_device_priv_data
->sas_target
->flags
&
4123 MPT_TARGET_FLAGS_RAID_COMPONENT
)
4124 mpi_request
->Function
= MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH
;
4126 mpi_request
->Function
= MPI2_FUNCTION_SCSI_IO_REQUEST
;
4127 mpi_request
->DevHandle
= cpu_to_le16(handle
);
4128 mpi_request
->DataLength
= cpu_to_le32(scsi_bufflen(scmd
));
4129 mpi_request
->Control
= cpu_to_le32(mpi_control
);
4130 mpi_request
->IoFlags
= cpu_to_le16(scmd
->cmd_len
);
4131 mpi_request
->MsgFlags
= MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR
;
4132 mpi_request
->SenseBufferLength
= SCSI_SENSE_BUFFERSIZE
;
4133 mpi_request
->SenseBufferLowAddress
=
4134 mpt3sas_base_get_sense_buffer_dma(ioc
, smid
);
4135 mpi_request
->SGLOffset0
= offsetof(Mpi2SCSIIORequest_t
, SGL
) / 4;
4136 int_to_scsilun(sas_device_priv_data
->lun
, (struct scsi_lun
*)
4138 memcpy(mpi_request
->CDB
.CDB32
, scmd
->cmnd
, scmd
->cmd_len
);
4140 if (mpi_request
->DataLength
) {
4141 if (ioc
->build_sg_scmd(ioc
, scmd
, smid
)) {
4142 mpt3sas_base_free_smid(ioc
, smid
);
4146 ioc
->build_zero_len_sge(ioc
, &mpi_request
->SGL
);
4148 raid_device
= sas_target_priv_data
->raid_device
;
4149 if (raid_device
&& raid_device
->direct_io_enabled
)
4150 mpt3sas_setup_direct_io(ioc
, scmd
, raid_device
, mpi_request
,
4153 if (likely(mpi_request
->Function
== MPI2_FUNCTION_SCSI_IO_REQUEST
)) {
4154 if (sas_target_priv_data
->flags
& MPT_TARGET_FASTPATH_IO
) {
4155 mpi_request
->IoFlags
= cpu_to_le16(scmd
->cmd_len
|
4156 MPI25_SCSIIO_IOFLAGS_FAST_PATH
);
4157 mpt3sas_base_put_smid_fast_path(ioc
, smid
, handle
);
4159 mpt3sas_base_put_smid_scsi_io(ioc
, smid
,
4160 le16_to_cpu(mpi_request
->DevHandle
));
4162 mpt3sas_base_put_smid_default(ioc
, smid
);
4166 return SCSI_MLQUEUE_HOST_BUSY
;
4170 * _scsih_normalize_sense - normalize descriptor and fixed format sense data
4171 * @sense_buffer: sense data returned by target
4172 * @data: normalized skey/asc/ascq
4177 _scsih_normalize_sense(char *sense_buffer
, struct sense_info
*data
)
4179 if ((sense_buffer
[0] & 0x7F) >= 0x72) {
4180 /* descriptor format */
4181 data
->skey
= sense_buffer
[1] & 0x0F;
4182 data
->asc
= sense_buffer
[2];
4183 data
->ascq
= sense_buffer
[3];
4186 data
->skey
= sense_buffer
[2] & 0x0F;
4187 data
->asc
= sense_buffer
[12];
4188 data
->ascq
= sense_buffer
[13];
4193 * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
4194 * @ioc: per adapter object
4195 * @scmd: pointer to scsi command object
4196 * @mpi_reply: reply mf payload returned from firmware
4198 * scsi_status - SCSI Status code returned from target device
4199 * scsi_state - state info associated with SCSI_IO determined by ioc
4200 * ioc_status - ioc supplied status info
4205 _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER
*ioc
, struct scsi_cmnd
*scmd
,
4206 Mpi2SCSIIOReply_t
*mpi_reply
, u16 smid
)
4210 u16 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
) &
4211 MPI2_IOCSTATUS_MASK
;
4212 u8 scsi_state
= mpi_reply
->SCSIState
;
4213 u8 scsi_status
= mpi_reply
->SCSIStatus
;
4214 char *desc_ioc_state
= NULL
;
4215 char *desc_scsi_status
= NULL
;
4216 char *desc_scsi_state
= ioc
->tmp_string
;
4217 u32 log_info
= le32_to_cpu(mpi_reply
->IOCLogInfo
);
4218 struct _sas_device
*sas_device
= NULL
;
4219 struct scsi_target
*starget
= scmd
->device
->sdev_target
;
4220 struct MPT3SAS_TARGET
*priv_target
= starget
->hostdata
;
4221 char *device_str
= NULL
;
4225 if (ioc
->hide_ir_msg
)
4226 device_str
= "WarpDrive";
4228 device_str
= "volume";
4230 if (log_info
== 0x31170000)
4233 switch (ioc_status
) {
4234 case MPI2_IOCSTATUS_SUCCESS
:
4235 desc_ioc_state
= "success";
4237 case MPI2_IOCSTATUS_INVALID_FUNCTION
:
4238 desc_ioc_state
= "invalid function";
4240 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR
:
4241 desc_ioc_state
= "scsi recovered error";
4243 case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE
:
4244 desc_ioc_state
= "scsi invalid dev handle";
4246 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE
:
4247 desc_ioc_state
= "scsi device not there";
4249 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN
:
4250 desc_ioc_state
= "scsi data overrun";
4252 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN
:
4253 desc_ioc_state
= "scsi data underrun";
4255 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR
:
4256 desc_ioc_state
= "scsi io data error";
4258 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR
:
4259 desc_ioc_state
= "scsi protocol error";
4261 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED
:
4262 desc_ioc_state
= "scsi task terminated";
4264 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH
:
4265 desc_ioc_state
= "scsi residual mismatch";
4267 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED
:
4268 desc_ioc_state
= "scsi task mgmt failed";
4270 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED
:
4271 desc_ioc_state
= "scsi ioc terminated";
4273 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED
:
4274 desc_ioc_state
= "scsi ext terminated";
4276 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR
:
4277 desc_ioc_state
= "eedp guard error";
4279 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR
:
4280 desc_ioc_state
= "eedp ref tag error";
4282 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR
:
4283 desc_ioc_state
= "eedp app tag error";
4285 case MPI2_IOCSTATUS_INSUFFICIENT_POWER
:
4286 desc_ioc_state
= "insufficient power";
4289 desc_ioc_state
= "unknown";
4293 switch (scsi_status
) {
4294 case MPI2_SCSI_STATUS_GOOD
:
4295 desc_scsi_status
= "good";
4297 case MPI2_SCSI_STATUS_CHECK_CONDITION
:
4298 desc_scsi_status
= "check condition";
4300 case MPI2_SCSI_STATUS_CONDITION_MET
:
4301 desc_scsi_status
= "condition met";
4303 case MPI2_SCSI_STATUS_BUSY
:
4304 desc_scsi_status
= "busy";
4306 case MPI2_SCSI_STATUS_INTERMEDIATE
:
4307 desc_scsi_status
= "intermediate";
4309 case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET
:
4310 desc_scsi_status
= "intermediate condmet";
4312 case MPI2_SCSI_STATUS_RESERVATION_CONFLICT
:
4313 desc_scsi_status
= "reservation conflict";
4315 case MPI2_SCSI_STATUS_COMMAND_TERMINATED
:
4316 desc_scsi_status
= "command terminated";
4318 case MPI2_SCSI_STATUS_TASK_SET_FULL
:
4319 desc_scsi_status
= "task set full";
4321 case MPI2_SCSI_STATUS_ACA_ACTIVE
:
4322 desc_scsi_status
= "aca active";
4324 case MPI2_SCSI_STATUS_TASK_ABORTED
:
4325 desc_scsi_status
= "task aborted";
4328 desc_scsi_status
= "unknown";
4332 desc_scsi_state
[0] = '\0';
4334 desc_scsi_state
= " ";
4335 if (scsi_state
& MPI2_SCSI_STATE_RESPONSE_INFO_VALID
)
4336 strcat(desc_scsi_state
, "response info ");
4337 if (scsi_state
& MPI2_SCSI_STATE_TERMINATED
)
4338 strcat(desc_scsi_state
, "state terminated ");
4339 if (scsi_state
& MPI2_SCSI_STATE_NO_SCSI_STATUS
)
4340 strcat(desc_scsi_state
, "no status ");
4341 if (scsi_state
& MPI2_SCSI_STATE_AUTOSENSE_FAILED
)
4342 strcat(desc_scsi_state
, "autosense failed ");
4343 if (scsi_state
& MPI2_SCSI_STATE_AUTOSENSE_VALID
)
4344 strcat(desc_scsi_state
, "autosense valid ");
4346 scsi_print_command(scmd
);
4348 if (priv_target
->flags
& MPT_TARGET_FLAGS_VOLUME
) {
4349 pr_warn(MPT3SAS_FMT
"\t%s wwid(0x%016llx)\n", ioc
->name
,
4350 device_str
, (unsigned long long)priv_target
->sas_address
);
4352 sas_device
= mpt3sas_get_sdev_from_target(ioc
, priv_target
);
4355 "\tsas_address(0x%016llx), phy(%d)\n",
4356 ioc
->name
, (unsigned long long)
4357 sas_device
->sas_address
, sas_device
->phy
);
4358 if (sas_device
->enclosure_handle
!= 0)
4360 "\tenclosure_logical_id(0x%016llx),"
4361 "slot(%d)\n", ioc
->name
,
4362 (unsigned long long)
4363 sas_device
->enclosure_logical_id
,
4365 if (sas_device
->connector_name
[0])
4367 "\tenclosure level(0x%04x),"
4368 " connector name( %s)\n", ioc
->name
,
4369 sas_device
->enclosure_level
,
4370 sas_device
->connector_name
);
4372 sas_device_put(sas_device
);
4377 "\thandle(0x%04x), ioc_status(%s)(0x%04x), smid(%d)\n",
4378 ioc
->name
, le16_to_cpu(mpi_reply
->DevHandle
),
4379 desc_ioc_state
, ioc_status
, smid
);
4381 "\trequest_len(%d), underflow(%d), resid(%d)\n",
4382 ioc
->name
, scsi_bufflen(scmd
), scmd
->underflow
,
4383 scsi_get_resid(scmd
));
4385 "\ttag(%d), transfer_count(%d), sc->result(0x%08x)\n",
4386 ioc
->name
, le16_to_cpu(mpi_reply
->TaskTag
),
4387 le32_to_cpu(mpi_reply
->TransferCount
), scmd
->result
);
4389 "\tscsi_status(%s)(0x%02x), scsi_state(%s)(0x%02x)\n",
4390 ioc
->name
, desc_scsi_status
,
4391 scsi_status
, desc_scsi_state
, scsi_state
);
4393 if (scsi_state
& MPI2_SCSI_STATE_AUTOSENSE_VALID
) {
4394 struct sense_info data
;
4395 _scsih_normalize_sense(scmd
->sense_buffer
, &data
);
4397 "\t[sense_key,asc,ascq]: [0x%02x,0x%02x,0x%02x], count(%d)\n",
4398 ioc
->name
, data
.skey
,
4399 data
.asc
, data
.ascq
, le32_to_cpu(mpi_reply
->SenseCount
));
4402 if (scsi_state
& MPI2_SCSI_STATE_RESPONSE_INFO_VALID
) {
4403 response_info
= le32_to_cpu(mpi_reply
->ResponseInfo
);
4404 response_bytes
= (u8
*)&response_info
;
4405 _scsih_response_code(ioc
, response_bytes
[0]);
4410 * _scsih_turn_on_pfa_led - illuminate PFA LED
4411 * @ioc: per adapter object
4412 * @handle: device handle
4418 _scsih_turn_on_pfa_led(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
4420 Mpi2SepReply_t mpi_reply
;
4421 Mpi2SepRequest_t mpi_request
;
4422 struct _sas_device
*sas_device
;
4424 sas_device
= mpt3sas_get_sdev_by_handle(ioc
, handle
);
4428 memset(&mpi_request
, 0, sizeof(Mpi2SepRequest_t
));
4429 mpi_request
.Function
= MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR
;
4430 mpi_request
.Action
= MPI2_SEP_REQ_ACTION_WRITE_STATUS
;
4431 mpi_request
.SlotStatus
=
4432 cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT
);
4433 mpi_request
.DevHandle
= cpu_to_le16(handle
);
4434 mpi_request
.Flags
= MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS
;
4435 if ((mpt3sas_base_scsi_enclosure_processor(ioc
, &mpi_reply
,
4436 &mpi_request
)) != 0) {
4437 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n", ioc
->name
,
4438 __FILE__
, __LINE__
, __func__
);
4441 sas_device
->pfa_led_on
= 1;
4443 if (mpi_reply
.IOCStatus
|| mpi_reply
.IOCLogInfo
) {
4444 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
4445 "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
4446 ioc
->name
, le16_to_cpu(mpi_reply
.IOCStatus
),
4447 le32_to_cpu(mpi_reply
.IOCLogInfo
)));
4451 sas_device_put(sas_device
);
4455 * _scsih_turn_off_pfa_led - turn off Fault LED
4456 * @ioc: per adapter object
4457 * @sas_device: sas device whose PFA LED has to turned off
4463 _scsih_turn_off_pfa_led(struct MPT3SAS_ADAPTER
*ioc
,
4464 struct _sas_device
*sas_device
)
4466 Mpi2SepReply_t mpi_reply
;
4467 Mpi2SepRequest_t mpi_request
;
4469 memset(&mpi_request
, 0, sizeof(Mpi2SepRequest_t
));
4470 mpi_request
.Function
= MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR
;
4471 mpi_request
.Action
= MPI2_SEP_REQ_ACTION_WRITE_STATUS
;
4472 mpi_request
.SlotStatus
= 0;
4473 mpi_request
.Slot
= cpu_to_le16(sas_device
->slot
);
4474 mpi_request
.DevHandle
= 0;
4475 mpi_request
.EnclosureHandle
= cpu_to_le16(sas_device
->enclosure_handle
);
4476 mpi_request
.Flags
= MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS
;
4477 if ((mpt3sas_base_scsi_enclosure_processor(ioc
, &mpi_reply
,
4478 &mpi_request
)) != 0) {
4479 printk(MPT3SAS_FMT
"failure at %s:%d/%s()!\n", ioc
->name
,
4480 __FILE__
, __LINE__
, __func__
);
4484 if (mpi_reply
.IOCStatus
|| mpi_reply
.IOCLogInfo
) {
4485 dewtprintk(ioc
, printk(MPT3SAS_FMT
4486 "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
4487 ioc
->name
, le16_to_cpu(mpi_reply
.IOCStatus
),
4488 le32_to_cpu(mpi_reply
.IOCLogInfo
)));
4494 * _scsih_send_event_to_turn_on_pfa_led - fire delayed event
4495 * @ioc: per adapter object
4496 * @handle: device handle
4497 * Context: interrupt.
4502 _scsih_send_event_to_turn_on_pfa_led(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
4504 struct fw_event_work
*fw_event
;
4506 fw_event
= alloc_fw_event_work(0);
4509 fw_event
->event
= MPT3SAS_TURN_ON_PFA_LED
;
4510 fw_event
->device_handle
= handle
;
4511 fw_event
->ioc
= ioc
;
4512 _scsih_fw_event_add(ioc
, fw_event
);
4513 fw_event_work_put(fw_event
);
4517 * _scsih_smart_predicted_fault - process smart errors
4518 * @ioc: per adapter object
4519 * @handle: device handle
4520 * Context: interrupt.
4525 _scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
4527 struct scsi_target
*starget
;
4528 struct MPT3SAS_TARGET
*sas_target_priv_data
;
4529 Mpi2EventNotificationReply_t
*event_reply
;
4530 Mpi2EventDataSasDeviceStatusChange_t
*event_data
;
4531 struct _sas_device
*sas_device
;
4533 unsigned long flags
;
4535 /* only handle non-raid devices */
4536 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
4537 sas_device
= __mpt3sas_get_sdev_by_handle(ioc
, handle
);
4541 starget
= sas_device
->starget
;
4542 sas_target_priv_data
= starget
->hostdata
;
4544 if ((sas_target_priv_data
->flags
& MPT_TARGET_FLAGS_RAID_COMPONENT
) ||
4545 ((sas_target_priv_data
->flags
& MPT_TARGET_FLAGS_VOLUME
)))
4548 if (sas_device
->enclosure_handle
!= 0)
4549 starget_printk(KERN_INFO
, starget
, "predicted fault, "
4550 "enclosure logical id(0x%016llx), slot(%d)\n",
4551 (unsigned long long)sas_device
->enclosure_logical_id
,
4553 if (sas_device
->connector_name
[0] != '\0')
4554 starget_printk(KERN_WARNING
, starget
, "predicted fault, "
4555 "enclosure level(0x%04x), connector name( %s)\n",
4556 sas_device
->enclosure_level
,
4557 sas_device
->connector_name
);
4558 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
4560 if (ioc
->pdev
->subsystem_vendor
== PCI_VENDOR_ID_IBM
)
4561 _scsih_send_event_to_turn_on_pfa_led(ioc
, handle
);
4563 /* insert into event log */
4564 sz
= offsetof(Mpi2EventNotificationReply_t
, EventData
) +
4565 sizeof(Mpi2EventDataSasDeviceStatusChange_t
);
4566 event_reply
= kzalloc(sz
, GFP_KERNEL
);
4568 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4569 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4573 event_reply
->Function
= MPI2_FUNCTION_EVENT_NOTIFICATION
;
4574 event_reply
->Event
=
4575 cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
);
4576 event_reply
->MsgLength
= sz
/4;
4577 event_reply
->EventDataLength
=
4578 cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t
)/4);
4579 event_data
= (Mpi2EventDataSasDeviceStatusChange_t
*)
4580 event_reply
->EventData
;
4581 event_data
->ReasonCode
= MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA
;
4582 event_data
->ASC
= 0x5D;
4583 event_data
->DevHandle
= cpu_to_le16(handle
);
4584 event_data
->SASAddress
= cpu_to_le64(sas_target_priv_data
->sas_address
);
4585 mpt3sas_ctl_add_to_event_log(ioc
, event_reply
);
4589 sas_device_put(sas_device
);
4593 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
4598 * _scsih_io_done - scsi request callback
4599 * @ioc: per adapter object
4600 * @smid: system request message index
4601 * @msix_index: MSIX table index supplied by the OS
4602 * @reply: reply message frame(lower 32bit addr)
4604 * Callback handler when using _scsih_qcmd.
4606 * Return 1 meaning mf should be freed from _base_interrupt
4607 * 0 means the mf is freed from this function.
4610 _scsih_io_done(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
, u32 reply
)
4612 Mpi2SCSIIORequest_t
*mpi_request
;
4613 Mpi2SCSIIOReply_t
*mpi_reply
;
4614 struct scsi_cmnd
*scmd
;
4620 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
4621 u32 response_code
= 0;
4622 unsigned long flags
;
4624 mpi_reply
= mpt3sas_base_get_reply_virt_addr(ioc
, reply
);
4625 scmd
= _scsih_scsi_lookup_get_clear(ioc
, smid
);
4629 if (ata_12_16_cmd(scmd
))
4630 scsi_internal_device_unblock(scmd
->device
, SDEV_RUNNING
);
4632 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
4634 if (mpi_reply
== NULL
) {
4635 scmd
->result
= DID_OK
<< 16;
4639 sas_device_priv_data
= scmd
->device
->hostdata
;
4640 if (!sas_device_priv_data
|| !sas_device_priv_data
->sas_target
||
4641 sas_device_priv_data
->sas_target
->deleted
) {
4642 scmd
->result
= DID_NO_CONNECT
<< 16;
4645 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
);
4648 * WARPDRIVE: If direct_io is set then it is directIO,
4649 * the failed direct I/O should be redirected to volume
4651 if (mpt3sas_scsi_direct_io_get(ioc
, smid
) &&
4652 ((ioc_status
& MPI2_IOCSTATUS_MASK
)
4653 != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED
)) {
4654 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
4655 ioc
->scsi_lookup
[smid
- 1].scmd
= scmd
;
4656 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
4657 mpt3sas_scsi_direct_io_set(ioc
, smid
, 0);
4658 memcpy(mpi_request
->CDB
.CDB32
, scmd
->cmnd
, scmd
->cmd_len
);
4659 mpi_request
->DevHandle
=
4660 cpu_to_le16(sas_device_priv_data
->sas_target
->handle
);
4661 mpt3sas_base_put_smid_scsi_io(ioc
, smid
,
4662 sas_device_priv_data
->sas_target
->handle
);
4665 /* turning off TLR */
4666 scsi_state
= mpi_reply
->SCSIState
;
4667 if (scsi_state
& MPI2_SCSI_STATE_RESPONSE_INFO_VALID
)
4669 le32_to_cpu(mpi_reply
->ResponseInfo
) & 0xFF;
4670 if (!sas_device_priv_data
->tlr_snoop_check
) {
4671 sas_device_priv_data
->tlr_snoop_check
++;
4672 if (!ioc
->is_warpdrive
&&
4673 !scsih_is_raid(&scmd
->device
->sdev_gendev
) &&
4674 sas_is_tlr_enabled(scmd
->device
) &&
4675 response_code
== MPI2_SCSITASKMGMT_RSP_INVALID_FRAME
) {
4676 sas_disable_tlr(scmd
->device
);
4677 sdev_printk(KERN_INFO
, scmd
->device
, "TLR disabled\n");
4681 xfer_cnt
= le32_to_cpu(mpi_reply
->TransferCount
);
4682 scsi_set_resid(scmd
, scsi_bufflen(scmd
) - xfer_cnt
);
4683 if (ioc_status
& MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE
)
4684 log_info
= le32_to_cpu(mpi_reply
->IOCLogInfo
);
4687 ioc_status
&= MPI2_IOCSTATUS_MASK
;
4688 scsi_status
= mpi_reply
->SCSIStatus
;
4690 if (ioc_status
== MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN
&& xfer_cnt
== 0 &&
4691 (scsi_status
== MPI2_SCSI_STATUS_BUSY
||
4692 scsi_status
== MPI2_SCSI_STATUS_RESERVATION_CONFLICT
||
4693 scsi_status
== MPI2_SCSI_STATUS_TASK_SET_FULL
)) {
4694 ioc_status
= MPI2_IOCSTATUS_SUCCESS
;
4697 if (scsi_state
& MPI2_SCSI_STATE_AUTOSENSE_VALID
) {
4698 struct sense_info data
;
4699 const void *sense_data
= mpt3sas_base_get_sense_buffer(ioc
,
4701 u32 sz
= min_t(u32
, SCSI_SENSE_BUFFERSIZE
,
4702 le32_to_cpu(mpi_reply
->SenseCount
));
4703 memcpy(scmd
->sense_buffer
, sense_data
, sz
);
4704 _scsih_normalize_sense(scmd
->sense_buffer
, &data
);
4705 /* failure prediction threshold exceeded */
4706 if (data
.asc
== 0x5D)
4707 _scsih_smart_predicted_fault(ioc
,
4708 le16_to_cpu(mpi_reply
->DevHandle
));
4709 mpt3sas_trigger_scsi(ioc
, data
.skey
, data
.asc
, data
.ascq
);
4711 if ((ioc
->logging_level
& MPT_DEBUG_REPLY
) &&
4712 ((scmd
->sense_buffer
[2] == UNIT_ATTENTION
) ||
4713 (scmd
->sense_buffer
[2] == MEDIUM_ERROR
) ||
4714 (scmd
->sense_buffer
[2] == HARDWARE_ERROR
)))
4715 _scsih_scsi_ioc_info(ioc
, scmd
, mpi_reply
, smid
);
4717 switch (ioc_status
) {
4718 case MPI2_IOCSTATUS_BUSY
:
4719 case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES
:
4720 scmd
->result
= SAM_STAT_BUSY
;
4723 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE
:
4724 scmd
->result
= DID_NO_CONNECT
<< 16;
4727 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED
:
4728 if (sas_device_priv_data
->block
) {
4729 scmd
->result
= DID_TRANSPORT_DISRUPTED
<< 16;
4732 if (log_info
== 0x31110630) {
4733 if (scmd
->retries
> 2) {
4734 scmd
->result
= DID_NO_CONNECT
<< 16;
4735 scsi_device_set_state(scmd
->device
,
4738 scmd
->result
= DID_SOFT_ERROR
<< 16;
4739 scmd
->device
->expecting_cc_ua
= 1;
4742 } else if (log_info
== VIRTUAL_IO_FAILED_RETRY
) {
4743 scmd
->result
= DID_RESET
<< 16;
4746 scmd
->result
= DID_SOFT_ERROR
<< 16;
4748 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED
:
4749 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED
:
4750 scmd
->result
= DID_RESET
<< 16;
4753 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH
:
4754 if ((xfer_cnt
== 0) || (scmd
->underflow
> xfer_cnt
))
4755 scmd
->result
= DID_SOFT_ERROR
<< 16;
4757 scmd
->result
= (DID_OK
<< 16) | scsi_status
;
4760 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN
:
4761 scmd
->result
= (DID_OK
<< 16) | scsi_status
;
4763 if ((scsi_state
& MPI2_SCSI_STATE_AUTOSENSE_VALID
))
4766 if (xfer_cnt
< scmd
->underflow
) {
4767 if (scsi_status
== SAM_STAT_BUSY
)
4768 scmd
->result
= SAM_STAT_BUSY
;
4770 scmd
->result
= DID_SOFT_ERROR
<< 16;
4771 } else if (scsi_state
& (MPI2_SCSI_STATE_AUTOSENSE_FAILED
|
4772 MPI2_SCSI_STATE_NO_SCSI_STATUS
))
4773 scmd
->result
= DID_SOFT_ERROR
<< 16;
4774 else if (scsi_state
& MPI2_SCSI_STATE_TERMINATED
)
4775 scmd
->result
= DID_RESET
<< 16;
4776 else if (!xfer_cnt
&& scmd
->cmnd
[0] == REPORT_LUNS
) {
4777 mpi_reply
->SCSIState
= MPI2_SCSI_STATE_AUTOSENSE_VALID
;
4778 mpi_reply
->SCSIStatus
= SAM_STAT_CHECK_CONDITION
;
4779 scmd
->result
= (DRIVER_SENSE
<< 24) |
4780 SAM_STAT_CHECK_CONDITION
;
4781 scmd
->sense_buffer
[0] = 0x70;
4782 scmd
->sense_buffer
[2] = ILLEGAL_REQUEST
;
4783 scmd
->sense_buffer
[12] = 0x20;
4784 scmd
->sense_buffer
[13] = 0;
4788 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN
:
4789 scsi_set_resid(scmd
, 0);
4790 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR
:
4791 case MPI2_IOCSTATUS_SUCCESS
:
4792 scmd
->result
= (DID_OK
<< 16) | scsi_status
;
4793 if (response_code
==
4794 MPI2_SCSITASKMGMT_RSP_INVALID_FRAME
||
4795 (scsi_state
& (MPI2_SCSI_STATE_AUTOSENSE_FAILED
|
4796 MPI2_SCSI_STATE_NO_SCSI_STATUS
)))
4797 scmd
->result
= DID_SOFT_ERROR
<< 16;
4798 else if (scsi_state
& MPI2_SCSI_STATE_TERMINATED
)
4799 scmd
->result
= DID_RESET
<< 16;
4802 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR
:
4803 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR
:
4804 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR
:
4805 _scsih_eedp_error_handling(scmd
, ioc_status
);
4808 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR
:
4809 case MPI2_IOCSTATUS_INVALID_FUNCTION
:
4810 case MPI2_IOCSTATUS_INVALID_SGL
:
4811 case MPI2_IOCSTATUS_INTERNAL_ERROR
:
4812 case MPI2_IOCSTATUS_INVALID_FIELD
:
4813 case MPI2_IOCSTATUS_INVALID_STATE
:
4814 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR
:
4815 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED
:
4816 case MPI2_IOCSTATUS_INSUFFICIENT_POWER
:
4818 scmd
->result
= DID_SOFT_ERROR
<< 16;
4823 if (scmd
->result
&& (ioc
->logging_level
& MPT_DEBUG_REPLY
))
4824 _scsih_scsi_ioc_info(ioc
, scmd
, mpi_reply
, smid
);
4828 scsi_dma_unmap(scmd
);
4830 scmd
->scsi_done(scmd
);
4835 * _scsih_sas_host_refresh - refreshing sas host object contents
4836 * @ioc: per adapter object
4839 * During port enable, fw will send topology events for every device. Its
4840 * possible that the handles may change from the previous setting, so this
4841 * code keeping handles updating if changed.
4846 _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER
*ioc
)
4851 Mpi2ConfigReply_t mpi_reply
;
4852 Mpi2SasIOUnitPage0_t
*sas_iounit_pg0
= NULL
;
4853 u16 attached_handle
;
4856 dtmprintk(ioc
, pr_info(MPT3SAS_FMT
4857 "updating handles for sas_host(0x%016llx)\n",
4858 ioc
->name
, (unsigned long long)ioc
->sas_hba
.sas_address
));
4860 sz
= offsetof(Mpi2SasIOUnitPage0_t
, PhyData
) + (ioc
->sas_hba
.num_phys
4861 * sizeof(Mpi2SasIOUnit0PhyData_t
));
4862 sas_iounit_pg0
= kzalloc(sz
, GFP_KERNEL
);
4863 if (!sas_iounit_pg0
) {
4864 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4865 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4869 if ((mpt3sas_config_get_sas_iounit_pg0(ioc
, &mpi_reply
,
4870 sas_iounit_pg0
, sz
)) != 0)
4872 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) & MPI2_IOCSTATUS_MASK
;
4873 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
)
4875 for (i
= 0; i
< ioc
->sas_hba
.num_phys
; i
++) {
4876 link_rate
= sas_iounit_pg0
->PhyData
[i
].NegotiatedLinkRate
>> 4;
4878 ioc
->sas_hba
.handle
= le16_to_cpu(sas_iounit_pg0
->
4879 PhyData
[0].ControllerDevHandle
);
4880 ioc
->sas_hba
.phy
[i
].handle
= ioc
->sas_hba
.handle
;
4881 attached_handle
= le16_to_cpu(sas_iounit_pg0
->PhyData
[i
].
4883 if (attached_handle
&& link_rate
< MPI2_SAS_NEG_LINK_RATE_1_5
)
4884 link_rate
= MPI2_SAS_NEG_LINK_RATE_1_5
;
4885 mpt3sas_transport_update_links(ioc
, ioc
->sas_hba
.sas_address
,
4886 attached_handle
, i
, link_rate
);
4889 kfree(sas_iounit_pg0
);
4893 * _scsih_sas_host_add - create sas host object
4894 * @ioc: per adapter object
4896 * Creating host side data object, stored in ioc->sas_hba
4901 _scsih_sas_host_add(struct MPT3SAS_ADAPTER
*ioc
)
4904 Mpi2ConfigReply_t mpi_reply
;
4905 Mpi2SasIOUnitPage0_t
*sas_iounit_pg0
= NULL
;
4906 Mpi2SasIOUnitPage1_t
*sas_iounit_pg1
= NULL
;
4907 Mpi2SasPhyPage0_t phy_pg0
;
4908 Mpi2SasDevicePage0_t sas_device_pg0
;
4909 Mpi2SasEnclosurePage0_t enclosure_pg0
;
4912 u8 device_missing_delay
;
4915 mpt3sas_config_get_number_hba_phys(ioc
, &num_phys
);
4917 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4918 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4921 ioc
->sas_hba
.phy
= kcalloc(num_phys
,
4922 sizeof(struct _sas_phy
), GFP_KERNEL
);
4923 if (!ioc
->sas_hba
.phy
) {
4924 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4925 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4928 ioc
->sas_hba
.num_phys
= num_phys
;
4930 /* sas_iounit page 0 */
4931 sz
= offsetof(Mpi2SasIOUnitPage0_t
, PhyData
) + (ioc
->sas_hba
.num_phys
*
4932 sizeof(Mpi2SasIOUnit0PhyData_t
));
4933 sas_iounit_pg0
= kzalloc(sz
, GFP_KERNEL
);
4934 if (!sas_iounit_pg0
) {
4935 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4936 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4939 if ((mpt3sas_config_get_sas_iounit_pg0(ioc
, &mpi_reply
,
4940 sas_iounit_pg0
, sz
))) {
4941 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4942 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4945 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
4946 MPI2_IOCSTATUS_MASK
;
4947 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
4948 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4949 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4953 /* sas_iounit page 1 */
4954 sz
= offsetof(Mpi2SasIOUnitPage1_t
, PhyData
) + (ioc
->sas_hba
.num_phys
*
4955 sizeof(Mpi2SasIOUnit1PhyData_t
));
4956 sas_iounit_pg1
= kzalloc(sz
, GFP_KERNEL
);
4957 if (!sas_iounit_pg1
) {
4958 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4959 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4962 if ((mpt3sas_config_get_sas_iounit_pg1(ioc
, &mpi_reply
,
4963 sas_iounit_pg1
, sz
))) {
4964 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4965 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4968 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
4969 MPI2_IOCSTATUS_MASK
;
4970 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
4971 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4972 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4976 ioc
->io_missing_delay
=
4977 sas_iounit_pg1
->IODeviceMissingDelay
;
4978 device_missing_delay
=
4979 sas_iounit_pg1
->ReportDeviceMissingDelay
;
4980 if (device_missing_delay
& MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16
)
4981 ioc
->device_missing_delay
= (device_missing_delay
&
4982 MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
) * 16;
4984 ioc
->device_missing_delay
= device_missing_delay
&
4985 MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
;
4987 ioc
->sas_hba
.parent_dev
= &ioc
->shost
->shost_gendev
;
4988 for (i
= 0; i
< ioc
->sas_hba
.num_phys
; i
++) {
4989 if ((mpt3sas_config_get_phy_pg0(ioc
, &mpi_reply
, &phy_pg0
,
4991 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4992 ioc
->name
, __FILE__
, __LINE__
, __func__
);
4995 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
4996 MPI2_IOCSTATUS_MASK
;
4997 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
4998 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
4999 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5004 ioc
->sas_hba
.handle
= le16_to_cpu(sas_iounit_pg0
->
5005 PhyData
[0].ControllerDevHandle
);
5006 ioc
->sas_hba
.phy
[i
].handle
= ioc
->sas_hba
.handle
;
5007 ioc
->sas_hba
.phy
[i
].phy_id
= i
;
5008 mpt3sas_transport_add_host_phy(ioc
, &ioc
->sas_hba
.phy
[i
],
5009 phy_pg0
, ioc
->sas_hba
.parent_dev
);
5011 if ((mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
, &sas_device_pg0
,
5012 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
, ioc
->sas_hba
.handle
))) {
5013 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5014 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5017 ioc
->sas_hba
.enclosure_handle
=
5018 le16_to_cpu(sas_device_pg0
.EnclosureHandle
);
5019 ioc
->sas_hba
.sas_address
= le64_to_cpu(sas_device_pg0
.SASAddress
);
5021 "host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
5022 ioc
->name
, ioc
->sas_hba
.handle
,
5023 (unsigned long long) ioc
->sas_hba
.sas_address
,
5024 ioc
->sas_hba
.num_phys
) ;
5026 if (ioc
->sas_hba
.enclosure_handle
) {
5027 if (!(mpt3sas_config_get_enclosure_pg0(ioc
, &mpi_reply
,
5028 &enclosure_pg0
, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE
,
5029 ioc
->sas_hba
.enclosure_handle
)))
5030 ioc
->sas_hba
.enclosure_logical_id
=
5031 le64_to_cpu(enclosure_pg0
.EnclosureLogicalID
);
5035 kfree(sas_iounit_pg1
);
5036 kfree(sas_iounit_pg0
);
5040 * _scsih_expander_add - creating expander object
5041 * @ioc: per adapter object
5042 * @handle: expander handle
5044 * Creating expander object, stored in ioc->sas_expander_list.
5046 * Return 0 for success, else error.
5049 _scsih_expander_add(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
5051 struct _sas_node
*sas_expander
;
5052 Mpi2ConfigReply_t mpi_reply
;
5053 Mpi2ExpanderPage0_t expander_pg0
;
5054 Mpi2ExpanderPage1_t expander_pg1
;
5055 Mpi2SasEnclosurePage0_t enclosure_pg0
;
5058 u64 sas_address
, sas_address_parent
= 0;
5060 unsigned long flags
;
5061 struct _sas_port
*mpt3sas_port
= NULL
;
5068 if (ioc
->shost_recovery
|| ioc
->pci_error_recovery
)
5071 if ((mpt3sas_config_get_expander_pg0(ioc
, &mpi_reply
, &expander_pg0
,
5072 MPI2_SAS_EXPAND_PGAD_FORM_HNDL
, handle
))) {
5073 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5074 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5078 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
5079 MPI2_IOCSTATUS_MASK
;
5080 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
5081 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5082 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5086 /* handle out of order topology events */
5087 parent_handle
= le16_to_cpu(expander_pg0
.ParentDevHandle
);
5088 if (_scsih_get_sas_address(ioc
, parent_handle
, &sas_address_parent
)
5090 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5091 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5094 if (sas_address_parent
!= ioc
->sas_hba
.sas_address
) {
5095 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
5096 sas_expander
= mpt3sas_scsih_expander_find_by_sas_address(ioc
,
5097 sas_address_parent
);
5098 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
5099 if (!sas_expander
) {
5100 rc
= _scsih_expander_add(ioc
, parent_handle
);
5106 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
5107 sas_address
= le64_to_cpu(expander_pg0
.SASAddress
);
5108 sas_expander
= mpt3sas_scsih_expander_find_by_sas_address(ioc
,
5110 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
5115 sas_expander
= kzalloc(sizeof(struct _sas_node
),
5117 if (!sas_expander
) {
5118 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5119 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5123 sas_expander
->handle
= handle
;
5124 sas_expander
->num_phys
= expander_pg0
.NumPhys
;
5125 sas_expander
->sas_address_parent
= sas_address_parent
;
5126 sas_expander
->sas_address
= sas_address
;
5128 pr_info(MPT3SAS_FMT
"expander_add: handle(0x%04x)," \
5129 " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc
->name
,
5130 handle
, parent_handle
, (unsigned long long)
5131 sas_expander
->sas_address
, sas_expander
->num_phys
);
5133 if (!sas_expander
->num_phys
)
5135 sas_expander
->phy
= kcalloc(sas_expander
->num_phys
,
5136 sizeof(struct _sas_phy
), GFP_KERNEL
);
5137 if (!sas_expander
->phy
) {
5138 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5139 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5144 INIT_LIST_HEAD(&sas_expander
->sas_port_list
);
5145 mpt3sas_port
= mpt3sas_transport_port_add(ioc
, handle
,
5146 sas_address_parent
);
5147 if (!mpt3sas_port
) {
5148 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5149 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5153 sas_expander
->parent_dev
= &mpt3sas_port
->rphy
->dev
;
5155 for (i
= 0 ; i
< sas_expander
->num_phys
; i
++) {
5156 if ((mpt3sas_config_get_expander_pg1(ioc
, &mpi_reply
,
5157 &expander_pg1
, i
, handle
))) {
5158 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5159 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5163 sas_expander
->phy
[i
].handle
= handle
;
5164 sas_expander
->phy
[i
].phy_id
= i
;
5166 if ((mpt3sas_transport_add_expander_phy(ioc
,
5167 &sas_expander
->phy
[i
], expander_pg1
,
5168 sas_expander
->parent_dev
))) {
5169 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5170 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5176 if (sas_expander
->enclosure_handle
) {
5177 if (!(mpt3sas_config_get_enclosure_pg0(ioc
, &mpi_reply
,
5178 &enclosure_pg0
, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE
,
5179 sas_expander
->enclosure_handle
)))
5180 sas_expander
->enclosure_logical_id
=
5181 le64_to_cpu(enclosure_pg0
.EnclosureLogicalID
);
5184 _scsih_expander_node_add(ioc
, sas_expander
);
5190 mpt3sas_transport_port_remove(ioc
, sas_expander
->sas_address
,
5191 sas_address_parent
);
5192 kfree(sas_expander
);
5197 * mpt3sas_expander_remove - removing expander object
5198 * @ioc: per adapter object
5199 * @sas_address: expander sas_address
5204 mpt3sas_expander_remove(struct MPT3SAS_ADAPTER
*ioc
, u64 sas_address
)
5206 struct _sas_node
*sas_expander
;
5207 unsigned long flags
;
5209 if (ioc
->shost_recovery
)
5212 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
5213 sas_expander
= mpt3sas_scsih_expander_find_by_sas_address(ioc
,
5216 list_del(&sas_expander
->list
);
5217 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
5219 _scsih_expander_node_remove(ioc
, sas_expander
);
5223 * _scsih_done - internal SCSI_IO callback handler.
5224 * @ioc: per adapter object
5225 * @smid: system request message index
5226 * @msix_index: MSIX table index supplied by the OS
5227 * @reply: reply message frame(lower 32bit addr)
5229 * Callback handler when sending internal generated SCSI_IO.
5230 * The callback index passed is `ioc->scsih_cb_idx`
5232 * Return 1 meaning mf should be freed from _base_interrupt
5233 * 0 means the mf is freed from this function.
5236 _scsih_done(struct MPT3SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
, u32 reply
)
5238 MPI2DefaultReply_t
*mpi_reply
;
5240 mpi_reply
= mpt3sas_base_get_reply_virt_addr(ioc
, reply
);
5241 if (ioc
->scsih_cmds
.status
== MPT3_CMD_NOT_USED
)
5243 if (ioc
->scsih_cmds
.smid
!= smid
)
5245 ioc
->scsih_cmds
.status
|= MPT3_CMD_COMPLETE
;
5247 memcpy(ioc
->scsih_cmds
.reply
, mpi_reply
,
5248 mpi_reply
->MsgLength
*4);
5249 ioc
->scsih_cmds
.status
|= MPT3_CMD_REPLY_VALID
;
5251 ioc
->scsih_cmds
.status
&= ~MPT3_CMD_PENDING
;
5252 complete(&ioc
->scsih_cmds
.done
);
5259 #define MPT3_MAX_LUNS (255)
5263 * _scsih_check_access_status - check access flags
5264 * @ioc: per adapter object
5265 * @sas_address: sas address
5266 * @handle: sas device handle
5267 * @access_flags: errors returned during discovery of the device
5269 * Return 0 for success, else failure
5272 _scsih_check_access_status(struct MPT3SAS_ADAPTER
*ioc
, u64 sas_address
,
5273 u16 handle
, u8 access_status
)
5278 switch (access_status
) {
5279 case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS
:
5280 case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION
:
5283 case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED
:
5284 desc
= "sata capability failed";
5286 case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT
:
5287 desc
= "sata affiliation conflict";
5289 case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE
:
5290 desc
= "route not addressable";
5292 case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE
:
5293 desc
= "smp error not addressable";
5295 case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED
:
5296 desc
= "device blocked";
5298 case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED
:
5299 case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN
:
5300 case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT
:
5301 case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG
:
5302 case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION
:
5303 case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER
:
5304 case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN
:
5305 case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN
:
5306 case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN
:
5307 case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION
:
5308 case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE
:
5309 case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX
:
5310 desc
= "sata initialization failed";
5321 "discovery errors(%s): sas_address(0x%016llx), handle(0x%04x)\n",
5322 ioc
->name
, desc
, (unsigned long long)sas_address
, handle
);
5327 * _scsih_check_device - checking device responsiveness
5328 * @ioc: per adapter object
5329 * @parent_sas_address: sas address of parent expander or sas host
5330 * @handle: attached device handle
5331 * @phy_numberv: phy number
5332 * @link_rate: new link rate
5337 _scsih_check_device(struct MPT3SAS_ADAPTER
*ioc
,
5338 u64 parent_sas_address
, u16 handle
, u8 phy_number
, u8 link_rate
)
5340 Mpi2ConfigReply_t mpi_reply
;
5341 Mpi2SasDevicePage0_t sas_device_pg0
;
5342 struct _sas_device
*sas_device
;
5344 unsigned long flags
;
5346 struct scsi_target
*starget
;
5347 struct MPT3SAS_TARGET
*sas_target_priv_data
;
5351 if ((mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
, &sas_device_pg0
,
5352 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
, handle
)))
5355 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) & MPI2_IOCSTATUS_MASK
;
5356 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
)
5359 /* wide port handling ~ we need only handle device once for the phy that
5360 * is matched in sas device page zero
5362 if (phy_number
!= sas_device_pg0
.PhyNum
)
5365 /* check if this is end device */
5366 device_info
= le32_to_cpu(sas_device_pg0
.DeviceInfo
);
5367 if (!(_scsih_is_end_device(device_info
)))
5370 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
5371 sas_address
= le64_to_cpu(sas_device_pg0
.SASAddress
);
5372 sas_device
= __mpt3sas_get_sdev_by_addr(ioc
,
5378 if (unlikely(sas_device
->handle
!= handle
)) {
5379 starget
= sas_device
->starget
;
5380 sas_target_priv_data
= starget
->hostdata
;
5381 starget_printk(KERN_INFO
, starget
,
5382 "handle changed from(0x%04x) to (0x%04x)!!!\n",
5383 sas_device
->handle
, handle
);
5384 sas_target_priv_data
->handle
= handle
;
5385 sas_device
->handle
= handle
;
5386 if (sas_device_pg0
.Flags
&
5387 MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID
) {
5388 sas_device
->enclosure_level
=
5389 le16_to_cpu(sas_device_pg0
.EnclosureLevel
);
5390 memcpy(sas_device
->connector_name
,
5391 sas_device_pg0
.ConnectorName
, 4);
5392 sas_device
->connector_name
[4] = '\0';
5394 sas_device
->enclosure_level
= 0;
5395 sas_device
->connector_name
[0] = '\0';
5399 /* check if device is present */
5400 if (!(le16_to_cpu(sas_device_pg0
.Flags
) &
5401 MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT
)) {
5403 "device is not present handle(0x%04x), flags!!!\n",
5408 /* check if there were any issues with discovery */
5409 if (_scsih_check_access_status(ioc
, sas_address
, handle
,
5410 sas_device_pg0
.AccessStatus
))
5413 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
5414 _scsih_ublock_io_device(ioc
, sas_address
);
5417 sas_device_put(sas_device
);
5421 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
5423 sas_device_put(sas_device
);
5427 * _scsih_add_device - creating sas device object
5428 * @ioc: per adapter object
5429 * @handle: sas device handle
5430 * @phy_num: phy number end device attached to
5431 * @is_pd: is this hidden raid component
5433 * Creating end device object, stored in ioc->sas_device_list.
5435 * Returns 0 for success, non-zero for failure.
5438 _scsih_add_device(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
, u8 phy_num
,
5441 Mpi2ConfigReply_t mpi_reply
;
5442 Mpi2SasDevicePage0_t sas_device_pg0
;
5443 Mpi2SasEnclosurePage0_t enclosure_pg0
;
5444 struct _sas_device
*sas_device
;
5449 if ((mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
, &sas_device_pg0
,
5450 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
, handle
))) {
5451 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5452 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5456 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
5457 MPI2_IOCSTATUS_MASK
;
5458 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
5459 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5460 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5464 /* check if this is end device */
5465 device_info
= le32_to_cpu(sas_device_pg0
.DeviceInfo
);
5466 if (!(_scsih_is_end_device(device_info
)))
5468 sas_address
= le64_to_cpu(sas_device_pg0
.SASAddress
);
5470 /* check if device is present */
5471 if (!(le16_to_cpu(sas_device_pg0
.Flags
) &
5472 MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT
)) {
5473 pr_err(MPT3SAS_FMT
"device is not present handle(0x04%x)!!!\n",
5478 /* check if there were any issues with discovery */
5479 if (_scsih_check_access_status(ioc
, sas_address
, handle
,
5480 sas_device_pg0
.AccessStatus
))
5483 sas_device
= mpt3sas_get_sdev_by_addr(ioc
,
5486 sas_device_put(sas_device
);
5490 sas_device
= kzalloc(sizeof(struct _sas_device
),
5493 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5494 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5498 kref_init(&sas_device
->refcount
);
5499 sas_device
->handle
= handle
;
5500 if (_scsih_get_sas_address(ioc
,
5501 le16_to_cpu(sas_device_pg0
.ParentDevHandle
),
5502 &sas_device
->sas_address_parent
) != 0)
5503 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
5504 ioc
->name
, __FILE__
, __LINE__
, __func__
);
5505 sas_device
->enclosure_handle
=
5506 le16_to_cpu(sas_device_pg0
.EnclosureHandle
);
5507 if (sas_device
->enclosure_handle
!= 0)
5509 le16_to_cpu(sas_device_pg0
.Slot
);
5510 sas_device
->device_info
= device_info
;
5511 sas_device
->sas_address
= sas_address
;
5512 sas_device
->phy
= sas_device_pg0
.PhyNum
;
5513 sas_device
->fast_path
= (le16_to_cpu(sas_device_pg0
.Flags
) &
5514 MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE
) ? 1 : 0;
5516 if (sas_device_pg0
.Flags
& MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID
) {
5517 sas_device
->enclosure_level
=
5518 le16_to_cpu(sas_device_pg0
.EnclosureLevel
);
5519 memcpy(sas_device
->connector_name
,
5520 sas_device_pg0
.ConnectorName
, 4);
5521 sas_device
->connector_name
[4] = '\0';
5523 sas_device
->enclosure_level
= 0;
5524 sas_device
->connector_name
[0] = '\0';
5526 /* get enclosure_logical_id */
5527 if (sas_device
->enclosure_handle
&& !(mpt3sas_config_get_enclosure_pg0(
5528 ioc
, &mpi_reply
, &enclosure_pg0
, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE
,
5529 sas_device
->enclosure_handle
)))
5530 sas_device
->enclosure_logical_id
=
5531 le64_to_cpu(enclosure_pg0
.EnclosureLogicalID
);
5533 /* get device name */
5534 sas_device
->device_name
= le64_to_cpu(sas_device_pg0
.DeviceName
);
5536 if (ioc
->wait_for_discovery_to_complete
)
5537 _scsih_sas_device_init_add(ioc
, sas_device
);
5539 _scsih_sas_device_add(ioc
, sas_device
);
5541 sas_device_put(sas_device
);
5546 * _scsih_remove_device - removing sas device object
5547 * @ioc: per adapter object
5548 * @sas_device_delete: the sas_device object
5553 _scsih_remove_device(struct MPT3SAS_ADAPTER
*ioc
,
5554 struct _sas_device
*sas_device
)
5556 struct MPT3SAS_TARGET
*sas_target_priv_data
;
5558 if ((ioc
->pdev
->subsystem_vendor
== PCI_VENDOR_ID_IBM
) &&
5559 (sas_device
->pfa_led_on
)) {
5560 _scsih_turn_off_pfa_led(ioc
, sas_device
);
5561 sas_device
->pfa_led_on
= 0;
5563 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
5564 "%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n",
5565 ioc
->name
, __func__
,
5566 sas_device
->handle
, (unsigned long long)
5567 sas_device
->sas_address
));
5568 if (sas_device
->enclosure_handle
!= 0)
5569 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
5570 "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
5571 ioc
->name
, __func__
,
5572 (unsigned long long)sas_device
->enclosure_logical_id
,
5574 if (sas_device
->connector_name
[0] != '\0')
5575 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
5576 "%s: enter: enclosure level(0x%04x), connector name( %s)\n",
5577 ioc
->name
, __func__
,
5578 sas_device
->enclosure_level
,
5579 sas_device
->connector_name
));
5581 if (sas_device
->starget
&& sas_device
->starget
->hostdata
) {
5582 sas_target_priv_data
= sas_device
->starget
->hostdata
;
5583 sas_target_priv_data
->deleted
= 1;
5584 _scsih_ublock_io_device(ioc
, sas_device
->sas_address
);
5585 sas_target_priv_data
->handle
=
5586 MPT3SAS_INVALID_DEVICE_HANDLE
;
5589 if (!ioc
->hide_drives
)
5590 mpt3sas_transport_port_remove(ioc
,
5591 sas_device
->sas_address
,
5592 sas_device
->sas_address_parent
);
5595 "removing handle(0x%04x), sas_addr(0x%016llx)\n",
5596 ioc
->name
, sas_device
->handle
,
5597 (unsigned long long) sas_device
->sas_address
);
5598 if (sas_device
->enclosure_handle
!= 0)
5600 "removing : enclosure logical id(0x%016llx), slot(%d)\n",
5602 (unsigned long long)sas_device
->enclosure_logical_id
,
5604 if (sas_device
->connector_name
[0] != '\0')
5606 "removing enclosure level(0x%04x), connector name( %s)\n",
5607 ioc
->name
, sas_device
->enclosure_level
,
5608 sas_device
->connector_name
);
5610 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
5611 "%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
5612 ioc
->name
, __func__
,
5613 sas_device
->handle
, (unsigned long long)
5614 sas_device
->sas_address
));
5615 if (sas_device
->enclosure_handle
!= 0)
5616 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
5617 "%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
5618 ioc
->name
, __func__
,
5619 (unsigned long long)sas_device
->enclosure_logical_id
,
5621 if (sas_device
->connector_name
[0] != '\0')
5622 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
5623 "%s: exit: enclosure level(0x%04x), connector name(%s)\n",
5624 ioc
->name
, __func__
, sas_device
->enclosure_level
,
5625 sas_device
->connector_name
));
5629 * _scsih_sas_topology_change_event_debug - debug for topology event
5630 * @ioc: per adapter object
5631 * @event_data: event data payload
5635 _scsih_sas_topology_change_event_debug(struct MPT3SAS_ADAPTER
*ioc
,
5636 Mpi2EventDataSasTopologyChangeList_t
*event_data
)
5642 char *status_str
= NULL
;
5643 u8 link_rate
, prev_link_rate
;
5645 switch (event_data
->ExpStatus
) {
5646 case MPI2_EVENT_SAS_TOPO_ES_ADDED
:
5649 case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING
:
5650 status_str
= "remove";
5652 case MPI2_EVENT_SAS_TOPO_ES_RESPONDING
:
5654 status_str
= "responding";
5656 case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING
:
5657 status_str
= "remove delay";
5660 status_str
= "unknown status";
5663 pr_info(MPT3SAS_FMT
"sas topology change: (%s)\n",
5664 ioc
->name
, status_str
);
5665 pr_info("\thandle(0x%04x), enclosure_handle(0x%04x) " \
5666 "start_phy(%02d), count(%d)\n",
5667 le16_to_cpu(event_data
->ExpanderDevHandle
),
5668 le16_to_cpu(event_data
->EnclosureHandle
),
5669 event_data
->StartPhyNum
, event_data
->NumEntries
);
5670 for (i
= 0; i
< event_data
->NumEntries
; i
++) {
5671 handle
= le16_to_cpu(event_data
->PHY
[i
].AttachedDevHandle
);
5674 phy_number
= event_data
->StartPhyNum
+ i
;
5675 reason_code
= event_data
->PHY
[i
].PhyStatus
&
5676 MPI2_EVENT_SAS_TOPO_RC_MASK
;
5677 switch (reason_code
) {
5678 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED
:
5679 status_str
= "target add";
5681 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING
:
5682 status_str
= "target remove";
5684 case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING
:
5685 status_str
= "delay target remove";
5687 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED
:
5688 status_str
= "link rate change";
5690 case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE
:
5691 status_str
= "target responding";
5694 status_str
= "unknown";
5697 link_rate
= event_data
->PHY
[i
].LinkRate
>> 4;
5698 prev_link_rate
= event_data
->PHY
[i
].LinkRate
& 0xF;
5699 pr_info("\tphy(%02d), attached_handle(0x%04x): %s:" \
5700 " link rate: new(0x%02x), old(0x%02x)\n", phy_number
,
5701 handle
, status_str
, link_rate
, prev_link_rate
);
5707 * _scsih_sas_topology_change_event - handle topology changes
5708 * @ioc: per adapter object
5709 * @fw_event: The fw_event_work object
5714 _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER
*ioc
,
5715 struct fw_event_work
*fw_event
)
5718 u16 parent_handle
, handle
;
5720 u8 phy_number
, max_phys
;
5721 struct _sas_node
*sas_expander
;
5723 unsigned long flags
;
5724 u8 link_rate
, prev_link_rate
;
5725 Mpi2EventDataSasTopologyChangeList_t
*event_data
=
5726 (Mpi2EventDataSasTopologyChangeList_t
*)
5727 fw_event
->event_data
;
5729 if (ioc
->logging_level
& MPT_DEBUG_EVENT_WORK_TASK
)
5730 _scsih_sas_topology_change_event_debug(ioc
, event_data
);
5732 if (ioc
->shost_recovery
|| ioc
->remove_host
|| ioc
->pci_error_recovery
)
5735 if (!ioc
->sas_hba
.num_phys
)
5736 _scsih_sas_host_add(ioc
);
5738 _scsih_sas_host_refresh(ioc
);
5740 if (fw_event
->ignore
) {
5741 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
5742 "ignoring expander event\n", ioc
->name
));
5746 parent_handle
= le16_to_cpu(event_data
->ExpanderDevHandle
);
5748 /* handle expander add */
5749 if (event_data
->ExpStatus
== MPI2_EVENT_SAS_TOPO_ES_ADDED
)
5750 if (_scsih_expander_add(ioc
, parent_handle
) != 0)
5753 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
5754 sas_expander
= mpt3sas_scsih_expander_find_by_handle(ioc
,
5757 sas_address
= sas_expander
->sas_address
;
5758 max_phys
= sas_expander
->num_phys
;
5759 } else if (parent_handle
< ioc
->sas_hba
.num_phys
) {
5760 sas_address
= ioc
->sas_hba
.sas_address
;
5761 max_phys
= ioc
->sas_hba
.num_phys
;
5763 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
5766 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
5768 /* handle siblings events */
5769 for (i
= 0; i
< event_data
->NumEntries
; i
++) {
5770 if (fw_event
->ignore
) {
5771 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
5772 "ignoring expander event\n", ioc
->name
));
5775 if (ioc
->remove_host
|| ioc
->pci_error_recovery
)
5777 phy_number
= event_data
->StartPhyNum
+ i
;
5778 if (phy_number
>= max_phys
)
5780 reason_code
= event_data
->PHY
[i
].PhyStatus
&
5781 MPI2_EVENT_SAS_TOPO_RC_MASK
;
5782 if ((event_data
->PHY
[i
].PhyStatus
&
5783 MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT
) && (reason_code
!=
5784 MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING
))
5786 handle
= le16_to_cpu(event_data
->PHY
[i
].AttachedDevHandle
);
5789 link_rate
= event_data
->PHY
[i
].LinkRate
>> 4;
5790 prev_link_rate
= event_data
->PHY
[i
].LinkRate
& 0xF;
5791 switch (reason_code
) {
5792 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED
:
5794 if (ioc
->shost_recovery
)
5797 if (link_rate
== prev_link_rate
)
5800 mpt3sas_transport_update_links(ioc
, sas_address
,
5801 handle
, phy_number
, link_rate
);
5803 if (link_rate
< MPI2_SAS_NEG_LINK_RATE_1_5
)
5806 _scsih_check_device(ioc
, sas_address
, handle
,
5807 phy_number
, link_rate
);
5810 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED
:
5812 if (ioc
->shost_recovery
)
5815 mpt3sas_transport_update_links(ioc
, sas_address
,
5816 handle
, phy_number
, link_rate
);
5818 _scsih_add_device(ioc
, handle
, phy_number
, 0);
5821 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING
:
5823 _scsih_device_remove_by_handle(ioc
, handle
);
5828 /* handle expander removal */
5829 if (event_data
->ExpStatus
== MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING
&&
5831 mpt3sas_expander_remove(ioc
, sas_address
);
5837 * _scsih_sas_device_status_change_event_debug - debug for device event
5838 * @event_data: event data payload
5844 _scsih_sas_device_status_change_event_debug(struct MPT3SAS_ADAPTER
*ioc
,
5845 Mpi2EventDataSasDeviceStatusChange_t
*event_data
)
5847 char *reason_str
= NULL
;
5849 switch (event_data
->ReasonCode
) {
5850 case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA
:
5851 reason_str
= "smart data";
5853 case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED
:
5854 reason_str
= "unsupported device discovered";
5856 case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET
:
5857 reason_str
= "internal device reset";
5859 case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL
:
5860 reason_str
= "internal task abort";
5862 case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL
:
5863 reason_str
= "internal task abort set";
5865 case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL
:
5866 reason_str
= "internal clear task set";
5868 case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL
:
5869 reason_str
= "internal query task";
5871 case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
:
5872 reason_str
= "sata init failure";
5874 case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET
:
5875 reason_str
= "internal device reset complete";
5877 case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL
:
5878 reason_str
= "internal task abort complete";
5880 case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION
:
5881 reason_str
= "internal async notification";
5883 case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY
:
5884 reason_str
= "expander reduced functionality";
5886 case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY
:
5887 reason_str
= "expander reduced functionality complete";
5890 reason_str
= "unknown reason";
5893 pr_info(MPT3SAS_FMT
"device status change: (%s)\n"
5894 "\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
5895 ioc
->name
, reason_str
, le16_to_cpu(event_data
->DevHandle
),
5896 (unsigned long long)le64_to_cpu(event_data
->SASAddress
),
5897 le16_to_cpu(event_data
->TaskTag
));
5898 if (event_data
->ReasonCode
== MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA
)
5899 pr_info(MPT3SAS_FMT
", ASC(0x%x), ASCQ(0x%x)\n", ioc
->name
,
5900 event_data
->ASC
, event_data
->ASCQ
);
5905 * _scsih_sas_device_status_change_event - handle device status change
5906 * @ioc: per adapter object
5907 * @fw_event: The fw_event_work object
5913 _scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER
*ioc
,
5914 struct fw_event_work
*fw_event
)
5916 struct MPT3SAS_TARGET
*target_priv_data
;
5917 struct _sas_device
*sas_device
;
5919 unsigned long flags
;
5920 Mpi2EventDataSasDeviceStatusChange_t
*event_data
=
5921 (Mpi2EventDataSasDeviceStatusChange_t
*)
5922 fw_event
->event_data
;
5924 if (ioc
->logging_level
& MPT_DEBUG_EVENT_WORK_TASK
)
5925 _scsih_sas_device_status_change_event_debug(ioc
,
5928 /* In MPI Revision K (0xC), the internal device reset complete was
5929 * implemented, so avoid setting tm_busy flag for older firmware.
5931 if ((ioc
->facts
.HeaderVersion
>> 8) < 0xC)
5934 if (event_data
->ReasonCode
!=
5935 MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET
&&
5936 event_data
->ReasonCode
!=
5937 MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET
)
5940 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
5941 sas_address
= le64_to_cpu(event_data
->SASAddress
);
5942 sas_device
= __mpt3sas_get_sdev_by_addr(ioc
,
5945 if (!sas_device
|| !sas_device
->starget
)
5948 target_priv_data
= sas_device
->starget
->hostdata
;
5949 if (!target_priv_data
)
5952 if (event_data
->ReasonCode
==
5953 MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET
)
5954 target_priv_data
->tm_busy
= 1;
5956 target_priv_data
->tm_busy
= 0;
5960 sas_device_put(sas_device
);
5962 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
5967 * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
5969 * @ioc: per adapter object
5970 * @event_data: event data payload
5976 _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT3SAS_ADAPTER
*ioc
,
5977 Mpi2EventDataSasEnclDevStatusChange_t
*event_data
)
5979 char *reason_str
= NULL
;
5981 switch (event_data
->ReasonCode
) {
5982 case MPI2_EVENT_SAS_ENCL_RC_ADDED
:
5983 reason_str
= "enclosure add";
5985 case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING
:
5986 reason_str
= "enclosure remove";
5989 reason_str
= "unknown reason";
5993 pr_info(MPT3SAS_FMT
"enclosure status change: (%s)\n"
5994 "\thandle(0x%04x), enclosure logical id(0x%016llx)"
5995 " number slots(%d)\n", ioc
->name
, reason_str
,
5996 le16_to_cpu(event_data
->EnclosureHandle
),
5997 (unsigned long long)le64_to_cpu(event_data
->EnclosureLogicalID
),
5998 le16_to_cpu(event_data
->StartSlot
));
6002 * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
6003 * @ioc: per adapter object
6004 * @fw_event: The fw_event_work object
6010 _scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER
*ioc
,
6011 struct fw_event_work
*fw_event
)
6013 if (ioc
->logging_level
& MPT_DEBUG_EVENT_WORK_TASK
)
6014 _scsih_sas_enclosure_dev_status_change_event_debug(ioc
,
6015 (Mpi2EventDataSasEnclDevStatusChange_t
*)
6016 fw_event
->event_data
);
6020 * _scsih_sas_broadcast_primitive_event - handle broadcast events
6021 * @ioc: per adapter object
6022 * @fw_event: The fw_event_work object
6028 _scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER
*ioc
,
6029 struct fw_event_work
*fw_event
)
6031 struct scsi_cmnd
*scmd
;
6032 struct scsi_device
*sdev
;
6035 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
6036 u32 termination_count
;
6038 Mpi2SCSITaskManagementReply_t
*mpi_reply
;
6039 Mpi2EventDataSasBroadcastPrimitive_t
*event_data
=
6040 (Mpi2EventDataSasBroadcastPrimitive_t
*)
6041 fw_event
->event_data
;
6043 unsigned long flags
;
6046 u8 task_abort_retries
;
6048 mutex_lock(&ioc
->tm_cmds
.mutex
);
6050 "%s: enter: phy number(%d), width(%d)\n",
6051 ioc
->name
, __func__
, event_data
->PhyNum
,
6052 event_data
->PortWidth
);
6054 _scsih_block_io_all_device(ioc
);
6056 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
6057 mpi_reply
= ioc
->tm_cmds
.reply
;
6058 broadcast_aen_retry
:
6060 /* sanity checks for retrying this loop */
6061 if (max_retries
++ == 5) {
6062 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
"%s: giving up\n",
6063 ioc
->name
, __func__
));
6065 } else if (max_retries
> 1)
6066 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
"%s: %d retry\n",
6067 ioc
->name
, __func__
, max_retries
- 1));
6069 termination_count
= 0;
6071 for (smid
= 1; smid
<= ioc
->scsiio_depth
; smid
++) {
6072 if (ioc
->shost_recovery
)
6074 scmd
= _scsih_scsi_lookup_get(ioc
, smid
);
6077 sdev
= scmd
->device
;
6078 sas_device_priv_data
= sdev
->hostdata
;
6079 if (!sas_device_priv_data
|| !sas_device_priv_data
->sas_target
)
6081 /* skip hidden raid components */
6082 if (sas_device_priv_data
->sas_target
->flags
&
6083 MPT_TARGET_FLAGS_RAID_COMPONENT
)
6086 if (sas_device_priv_data
->sas_target
->flags
&
6087 MPT_TARGET_FLAGS_VOLUME
)
6090 handle
= sas_device_priv_data
->sas_target
->handle
;
6091 lun
= sas_device_priv_data
->lun
;
6094 if (ioc
->shost_recovery
)
6097 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
6098 r
= mpt3sas_scsih_issue_tm(ioc
, handle
, 0, 0, lun
,
6099 MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK
, smid
, 30);
6101 sdev_printk(KERN_WARNING
, sdev
,
6102 "mpt3sas_scsih_issue_tm: FAILED when sending "
6103 "QUERY_TASK: scmd(%p)\n", scmd
);
6104 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
6105 goto broadcast_aen_retry
;
6107 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
)
6108 & MPI2_IOCSTATUS_MASK
;
6109 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
6110 sdev_printk(KERN_WARNING
, sdev
,
6111 "query task: FAILED with IOCSTATUS(0x%04x), scmd(%p)\n",
6113 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
6114 goto broadcast_aen_retry
;
6117 /* see if IO is still owned by IOC and target */
6118 if (mpi_reply
->ResponseCode
==
6119 MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED
||
6120 mpi_reply
->ResponseCode
==
6121 MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC
) {
6122 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
6125 task_abort_retries
= 0;
6127 if (task_abort_retries
++ == 60) {
6128 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
6129 "%s: ABORT_TASK: giving up\n", ioc
->name
,
6131 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
6132 goto broadcast_aen_retry
;
6135 if (ioc
->shost_recovery
)
6138 r
= mpt3sas_scsih_issue_tm(ioc
, handle
, sdev
->channel
, sdev
->id
,
6139 sdev
->lun
, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK
, smid
,
6142 sdev_printk(KERN_WARNING
, sdev
,
6143 "mpt3sas_scsih_issue_tm: ABORT_TASK: FAILED : "
6144 "scmd(%p)\n", scmd
);
6148 if (task_abort_retries
> 1)
6149 sdev_printk(KERN_WARNING
, sdev
,
6150 "mpt3sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):"
6152 task_abort_retries
- 1, scmd
);
6154 termination_count
+= le32_to_cpu(mpi_reply
->TerminationCount
);
6155 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
6158 if (ioc
->broadcast_aen_pending
) {
6159 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
6160 "%s: loop back due to pending AEN\n",
6161 ioc
->name
, __func__
));
6162 ioc
->broadcast_aen_pending
= 0;
6163 goto broadcast_aen_retry
;
6167 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
6170 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
6171 "%s - exit, query_count = %d termination_count = %d\n",
6172 ioc
->name
, __func__
, query_count
, termination_count
));
6174 ioc
->broadcast_aen_busy
= 0;
6175 if (!ioc
->shost_recovery
)
6176 _scsih_ublock_io_all_device(ioc
);
6177 mutex_unlock(&ioc
->tm_cmds
.mutex
);
6181 * _scsih_sas_discovery_event - handle discovery events
6182 * @ioc: per adapter object
6183 * @fw_event: The fw_event_work object
6189 _scsih_sas_discovery_event(struct MPT3SAS_ADAPTER
*ioc
,
6190 struct fw_event_work
*fw_event
)
6192 Mpi2EventDataSasDiscovery_t
*event_data
=
6193 (Mpi2EventDataSasDiscovery_t
*) fw_event
->event_data
;
6195 if (ioc
->logging_level
& MPT_DEBUG_EVENT_WORK_TASK
) {
6196 pr_info(MPT3SAS_FMT
"discovery event: (%s)", ioc
->name
,
6197 (event_data
->ReasonCode
== MPI2_EVENT_SAS_DISC_RC_STARTED
) ?
6199 if (event_data
->DiscoveryStatus
)
6200 pr_info("discovery_status(0x%08x)",
6201 le32_to_cpu(event_data
->DiscoveryStatus
));
6205 if (event_data
->ReasonCode
== MPI2_EVENT_SAS_DISC_RC_STARTED
&&
6206 !ioc
->sas_hba
.num_phys
) {
6207 if (disable_discovery
> 0 && ioc
->shost_recovery
) {
6208 /* Wait for the reset to complete */
6209 while (ioc
->shost_recovery
)
6212 _scsih_sas_host_add(ioc
);
6217 * _scsih_ir_fastpath - turn on fastpath for IR physdisk
6218 * @ioc: per adapter object
6219 * @handle: device handle for physical disk
6220 * @phys_disk_num: physical disk number
6222 * Return 0 for success, else failure.
6225 _scsih_ir_fastpath(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
, u8 phys_disk_num
)
6227 Mpi2RaidActionRequest_t
*mpi_request
;
6228 Mpi2RaidActionReply_t
*mpi_reply
;
6235 if (ioc
->hba_mpi_version_belonged
== MPI2_VERSION
)
6238 mutex_lock(&ioc
->scsih_cmds
.mutex
);
6240 if (ioc
->scsih_cmds
.status
!= MPT3_CMD_NOT_USED
) {
6241 pr_err(MPT3SAS_FMT
"%s: scsih_cmd in use\n",
6242 ioc
->name
, __func__
);
6246 ioc
->scsih_cmds
.status
= MPT3_CMD_PENDING
;
6248 smid
= mpt3sas_base_get_smid(ioc
, ioc
->scsih_cb_idx
);
6250 pr_err(MPT3SAS_FMT
"%s: failed obtaining a smid\n",
6251 ioc
->name
, __func__
);
6252 ioc
->scsih_cmds
.status
= MPT3_CMD_NOT_USED
;
6257 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
6258 ioc
->scsih_cmds
.smid
= smid
;
6259 memset(mpi_request
, 0, sizeof(Mpi2RaidActionRequest_t
));
6261 mpi_request
->Function
= MPI2_FUNCTION_RAID_ACTION
;
6262 mpi_request
->Action
= MPI2_RAID_ACTION_PHYSDISK_HIDDEN
;
6263 mpi_request
->PhysDiskNum
= phys_disk_num
;
6265 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
"IR RAID_ACTION: turning fast "\
6266 "path on for handle(0x%04x), phys_disk_num (0x%02x)\n", ioc
->name
,
6267 handle
, phys_disk_num
));
6269 init_completion(&ioc
->scsih_cmds
.done
);
6270 mpt3sas_base_put_smid_default(ioc
, smid
);
6271 wait_for_completion_timeout(&ioc
->scsih_cmds
.done
, 10*HZ
);
6273 if (!(ioc
->scsih_cmds
.status
& MPT3_CMD_COMPLETE
)) {
6274 pr_err(MPT3SAS_FMT
"%s: timeout\n",
6275 ioc
->name
, __func__
);
6276 if (!(ioc
->scsih_cmds
.status
& MPT3_CMD_RESET
))
6282 if (ioc
->scsih_cmds
.status
& MPT3_CMD_REPLY_VALID
) {
6284 mpi_reply
= ioc
->scsih_cmds
.reply
;
6285 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
);
6286 if (ioc_status
& MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE
)
6287 log_info
= le32_to_cpu(mpi_reply
->IOCLogInfo
);
6290 ioc_status
&= MPI2_IOCSTATUS_MASK
;
6291 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
6292 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
6293 "IR RAID_ACTION: failed: ioc_status(0x%04x), "
6294 "loginfo(0x%08x)!!!\n", ioc
->name
, ioc_status
,
6298 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
6299 "IR RAID_ACTION: completed successfully\n",
6304 ioc
->scsih_cmds
.status
= MPT3_CMD_NOT_USED
;
6305 mutex_unlock(&ioc
->scsih_cmds
.mutex
);
6308 mpt3sas_base_hard_reset_handler(ioc
, FORCE_BIG_HAMMER
);
6313 * _scsih_reprobe_lun - reprobing lun
6314 * @sdev: scsi device struct
6315 * @no_uld_attach: sdev->no_uld_attach flag setting
6319 _scsih_reprobe_lun(struct scsi_device
*sdev
, void *no_uld_attach
)
6321 sdev
->no_uld_attach
= no_uld_attach
? 1 : 0;
6322 sdev_printk(KERN_INFO
, sdev
, "%s raid component\n",
6323 sdev
->no_uld_attach
? "hidding" : "exposing");
6324 WARN_ON(scsi_device_reprobe(sdev
));
6328 * _scsih_sas_volume_add - add new volume
6329 * @ioc: per adapter object
6330 * @element: IR config element data
6336 _scsih_sas_volume_add(struct MPT3SAS_ADAPTER
*ioc
,
6337 Mpi2EventIrConfigElement_t
*element
)
6339 struct _raid_device
*raid_device
;
6340 unsigned long flags
;
6342 u16 handle
= le16_to_cpu(element
->VolDevHandle
);
6345 mpt3sas_config_get_volume_wwid(ioc
, handle
, &wwid
);
6348 "failure at %s:%d/%s()!\n", ioc
->name
,
6349 __FILE__
, __LINE__
, __func__
);
6353 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
6354 raid_device
= _scsih_raid_device_find_by_wwid(ioc
, wwid
);
6355 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
6360 raid_device
= kzalloc(sizeof(struct _raid_device
), GFP_KERNEL
);
6363 "failure at %s:%d/%s()!\n", ioc
->name
,
6364 __FILE__
, __LINE__
, __func__
);
6368 raid_device
->id
= ioc
->sas_id
++;
6369 raid_device
->channel
= RAID_CHANNEL
;
6370 raid_device
->handle
= handle
;
6371 raid_device
->wwid
= wwid
;
6372 _scsih_raid_device_add(ioc
, raid_device
);
6373 if (!ioc
->wait_for_discovery_to_complete
) {
6374 rc
= scsi_add_device(ioc
->shost
, RAID_CHANNEL
,
6375 raid_device
->id
, 0);
6377 _scsih_raid_device_remove(ioc
, raid_device
);
6379 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
6380 _scsih_determine_boot_device(ioc
, raid_device
, 1);
6381 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
6386 * _scsih_sas_volume_delete - delete volume
6387 * @ioc: per adapter object
6388 * @handle: volume device handle
6394 _scsih_sas_volume_delete(struct MPT3SAS_ADAPTER
*ioc
, u16 handle
)
6396 struct _raid_device
*raid_device
;
6397 unsigned long flags
;
6398 struct MPT3SAS_TARGET
*sas_target_priv_data
;
6399 struct scsi_target
*starget
= NULL
;
6401 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
6402 raid_device
= mpt3sas_raid_device_find_by_handle(ioc
, handle
);
6404 if (raid_device
->starget
) {
6405 starget
= raid_device
->starget
;
6406 sas_target_priv_data
= starget
->hostdata
;
6407 sas_target_priv_data
->deleted
= 1;
6409 pr_info(MPT3SAS_FMT
"removing handle(0x%04x), wwid(0x%016llx)\n",
6410 ioc
->name
, raid_device
->handle
,
6411 (unsigned long long) raid_device
->wwid
);
6412 list_del(&raid_device
->list
);
6415 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
6417 scsi_remove_target(&starget
->dev
);
6421 * _scsih_sas_pd_expose - expose pd component to /dev/sdX
6422 * @ioc: per adapter object
6423 * @element: IR config element data
6429 _scsih_sas_pd_expose(struct MPT3SAS_ADAPTER
*ioc
,
6430 Mpi2EventIrConfigElement_t
*element
)
6432 struct _sas_device
*sas_device
;
6433 struct scsi_target
*starget
= NULL
;
6434 struct MPT3SAS_TARGET
*sas_target_priv_data
;
6435 unsigned long flags
;
6436 u16 handle
= le16_to_cpu(element
->PhysDiskDevHandle
);
6438 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
6439 sas_device
= __mpt3sas_get_sdev_by_handle(ioc
, handle
);
6441 sas_device
->volume_handle
= 0;
6442 sas_device
->volume_wwid
= 0;
6443 clear_bit(handle
, ioc
->pd_handles
);
6444 if (sas_device
->starget
&& sas_device
->starget
->hostdata
) {
6445 starget
= sas_device
->starget
;
6446 sas_target_priv_data
= starget
->hostdata
;
6447 sas_target_priv_data
->flags
&=
6448 ~MPT_TARGET_FLAGS_RAID_COMPONENT
;
6451 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
6455 /* exposing raid component */
6457 starget_for_each_device(starget
, NULL
, _scsih_reprobe_lun
);
6459 sas_device_put(sas_device
);
6463 * _scsih_sas_pd_hide - hide pd component from /dev/sdX
6464 * @ioc: per adapter object
6465 * @element: IR config element data
6471 _scsih_sas_pd_hide(struct MPT3SAS_ADAPTER
*ioc
,
6472 Mpi2EventIrConfigElement_t
*element
)
6474 struct _sas_device
*sas_device
;
6475 struct scsi_target
*starget
= NULL
;
6476 struct MPT3SAS_TARGET
*sas_target_priv_data
;
6477 unsigned long flags
;
6478 u16 handle
= le16_to_cpu(element
->PhysDiskDevHandle
);
6479 u16 volume_handle
= 0;
6480 u64 volume_wwid
= 0;
6482 mpt3sas_config_get_volume_handle(ioc
, handle
, &volume_handle
);
6484 mpt3sas_config_get_volume_wwid(ioc
, volume_handle
,
6487 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
6488 sas_device
= __mpt3sas_get_sdev_by_handle(ioc
, handle
);
6490 set_bit(handle
, ioc
->pd_handles
);
6491 if (sas_device
->starget
&& sas_device
->starget
->hostdata
) {
6492 starget
= sas_device
->starget
;
6493 sas_target_priv_data
= starget
->hostdata
;
6494 sas_target_priv_data
->flags
|=
6495 MPT_TARGET_FLAGS_RAID_COMPONENT
;
6496 sas_device
->volume_handle
= volume_handle
;
6497 sas_device
->volume_wwid
= volume_wwid
;
6500 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
6504 /* hiding raid component */
6505 _scsih_ir_fastpath(ioc
, handle
, element
->PhysDiskNum
);
6508 starget_for_each_device(starget
, (void *)1, _scsih_reprobe_lun
);
6510 sas_device_put(sas_device
);
6514 * _scsih_sas_pd_delete - delete pd component
6515 * @ioc: per adapter object
6516 * @element: IR config element data
6522 _scsih_sas_pd_delete(struct MPT3SAS_ADAPTER
*ioc
,
6523 Mpi2EventIrConfigElement_t
*element
)
6525 u16 handle
= le16_to_cpu(element
->PhysDiskDevHandle
);
6527 _scsih_device_remove_by_handle(ioc
, handle
);
6531 * _scsih_sas_pd_add - remove pd component
6532 * @ioc: per adapter object
6533 * @element: IR config element data
6539 _scsih_sas_pd_add(struct MPT3SAS_ADAPTER
*ioc
,
6540 Mpi2EventIrConfigElement_t
*element
)
6542 struct _sas_device
*sas_device
;
6543 u16 handle
= le16_to_cpu(element
->PhysDiskDevHandle
);
6544 Mpi2ConfigReply_t mpi_reply
;
6545 Mpi2SasDevicePage0_t sas_device_pg0
;
6550 set_bit(handle
, ioc
->pd_handles
);
6552 sas_device
= mpt3sas_get_sdev_by_handle(ioc
, handle
);
6554 _scsih_ir_fastpath(ioc
, handle
, element
->PhysDiskNum
);
6555 sas_device_put(sas_device
);
6559 if ((mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
, &sas_device_pg0
,
6560 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
, handle
))) {
6561 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
6562 ioc
->name
, __FILE__
, __LINE__
, __func__
);
6566 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
6567 MPI2_IOCSTATUS_MASK
;
6568 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
6569 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
6570 ioc
->name
, __FILE__
, __LINE__
, __func__
);
6574 parent_handle
= le16_to_cpu(sas_device_pg0
.ParentDevHandle
);
6575 if (!_scsih_get_sas_address(ioc
, parent_handle
, &sas_address
))
6576 mpt3sas_transport_update_links(ioc
, sas_address
, handle
,
6577 sas_device_pg0
.PhyNum
, MPI2_SAS_NEG_LINK_RATE_1_5
);
6579 _scsih_ir_fastpath(ioc
, handle
, element
->PhysDiskNum
);
6580 _scsih_add_device(ioc
, handle
, 0, 1);
6584 * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
6585 * @ioc: per adapter object
6586 * @event_data: event data payload
6592 _scsih_sas_ir_config_change_event_debug(struct MPT3SAS_ADAPTER
*ioc
,
6593 Mpi2EventDataIrConfigChangeList_t
*event_data
)
6595 Mpi2EventIrConfigElement_t
*element
;
6598 char *reason_str
= NULL
, *element_str
= NULL
;
6600 element
= (Mpi2EventIrConfigElement_t
*)&event_data
->ConfigElement
[0];
6602 pr_info(MPT3SAS_FMT
"raid config change: (%s), elements(%d)\n",
6603 ioc
->name
, (le32_to_cpu(event_data
->Flags
) &
6604 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG
) ?
6605 "foreign" : "native", event_data
->NumElements
);
6606 for (i
= 0; i
< event_data
->NumElements
; i
++, element
++) {
6607 switch (element
->ReasonCode
) {
6608 case MPI2_EVENT_IR_CHANGE_RC_ADDED
:
6611 case MPI2_EVENT_IR_CHANGE_RC_REMOVED
:
6612 reason_str
= "remove";
6614 case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE
:
6615 reason_str
= "no change";
6617 case MPI2_EVENT_IR_CHANGE_RC_HIDE
:
6618 reason_str
= "hide";
6620 case MPI2_EVENT_IR_CHANGE_RC_UNHIDE
:
6621 reason_str
= "unhide";
6623 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED
:
6624 reason_str
= "volume_created";
6626 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED
:
6627 reason_str
= "volume_deleted";
6629 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED
:
6630 reason_str
= "pd_created";
6632 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED
:
6633 reason_str
= "pd_deleted";
6636 reason_str
= "unknown reason";
6639 element_type
= le16_to_cpu(element
->ElementFlags
) &
6640 MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK
;
6641 switch (element_type
) {
6642 case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT
:
6643 element_str
= "volume";
6645 case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT
:
6646 element_str
= "phys disk";
6648 case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT
:
6649 element_str
= "hot spare";
6652 element_str
= "unknown element";
6655 pr_info("\t(%s:%s), vol handle(0x%04x), " \
6656 "pd handle(0x%04x), pd num(0x%02x)\n", element_str
,
6657 reason_str
, le16_to_cpu(element
->VolDevHandle
),
6658 le16_to_cpu(element
->PhysDiskDevHandle
),
6659 element
->PhysDiskNum
);
6664 * _scsih_sas_ir_config_change_event - handle ir configuration change events
6665 * @ioc: per adapter object
6666 * @fw_event: The fw_event_work object
6672 _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER
*ioc
,
6673 struct fw_event_work
*fw_event
)
6675 Mpi2EventIrConfigElement_t
*element
;
6678 Mpi2EventDataIrConfigChangeList_t
*event_data
=
6679 (Mpi2EventDataIrConfigChangeList_t
*)
6680 fw_event
->event_data
;
6682 if ((ioc
->logging_level
& MPT_DEBUG_EVENT_WORK_TASK
) &&
6683 (!ioc
->hide_ir_msg
))
6684 _scsih_sas_ir_config_change_event_debug(ioc
, event_data
);
6686 foreign_config
= (le32_to_cpu(event_data
->Flags
) &
6687 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG
) ? 1 : 0;
6689 element
= (Mpi2EventIrConfigElement_t
*)&event_data
->ConfigElement
[0];
6690 if (ioc
->shost_recovery
&&
6691 ioc
->hba_mpi_version_belonged
!= MPI2_VERSION
) {
6692 for (i
= 0; i
< event_data
->NumElements
; i
++, element
++) {
6693 if (element
->ReasonCode
== MPI2_EVENT_IR_CHANGE_RC_HIDE
)
6694 _scsih_ir_fastpath(ioc
,
6695 le16_to_cpu(element
->PhysDiskDevHandle
),
6696 element
->PhysDiskNum
);
6701 for (i
= 0; i
< event_data
->NumElements
; i
++, element
++) {
6703 switch (element
->ReasonCode
) {
6704 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED
:
6705 case MPI2_EVENT_IR_CHANGE_RC_ADDED
:
6706 if (!foreign_config
)
6707 _scsih_sas_volume_add(ioc
, element
);
6709 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED
:
6710 case MPI2_EVENT_IR_CHANGE_RC_REMOVED
:
6711 if (!foreign_config
)
6712 _scsih_sas_volume_delete(ioc
,
6713 le16_to_cpu(element
->VolDevHandle
));
6715 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED
:
6716 if (!ioc
->is_warpdrive
)
6717 _scsih_sas_pd_hide(ioc
, element
);
6719 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED
:
6720 if (!ioc
->is_warpdrive
)
6721 _scsih_sas_pd_expose(ioc
, element
);
6723 case MPI2_EVENT_IR_CHANGE_RC_HIDE
:
6724 if (!ioc
->is_warpdrive
)
6725 _scsih_sas_pd_add(ioc
, element
);
6727 case MPI2_EVENT_IR_CHANGE_RC_UNHIDE
:
6728 if (!ioc
->is_warpdrive
)
6729 _scsih_sas_pd_delete(ioc
, element
);
6736 * _scsih_sas_ir_volume_event - IR volume event
6737 * @ioc: per adapter object
6738 * @fw_event: The fw_event_work object
6744 _scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER
*ioc
,
6745 struct fw_event_work
*fw_event
)
6748 unsigned long flags
;
6749 struct _raid_device
*raid_device
;
6753 Mpi2EventDataIrVolume_t
*event_data
=
6754 (Mpi2EventDataIrVolume_t
*) fw_event
->event_data
;
6756 if (ioc
->shost_recovery
)
6759 if (event_data
->ReasonCode
!= MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED
)
6762 handle
= le16_to_cpu(event_data
->VolDevHandle
);
6763 state
= le32_to_cpu(event_data
->NewValue
);
6764 if (!ioc
->hide_ir_msg
)
6765 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
6766 "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
6767 ioc
->name
, __func__
, handle
,
6768 le32_to_cpu(event_data
->PreviousValue
), state
));
6770 case MPI2_RAID_VOL_STATE_MISSING
:
6771 case MPI2_RAID_VOL_STATE_FAILED
:
6772 _scsih_sas_volume_delete(ioc
, handle
);
6775 case MPI2_RAID_VOL_STATE_ONLINE
:
6776 case MPI2_RAID_VOL_STATE_DEGRADED
:
6777 case MPI2_RAID_VOL_STATE_OPTIMAL
:
6779 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
6780 raid_device
= mpt3sas_raid_device_find_by_handle(ioc
, handle
);
6781 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
6786 mpt3sas_config_get_volume_wwid(ioc
, handle
, &wwid
);
6789 "failure at %s:%d/%s()!\n", ioc
->name
,
6790 __FILE__
, __LINE__
, __func__
);
6794 raid_device
= kzalloc(sizeof(struct _raid_device
), GFP_KERNEL
);
6797 "failure at %s:%d/%s()!\n", ioc
->name
,
6798 __FILE__
, __LINE__
, __func__
);
6802 raid_device
->id
= ioc
->sas_id
++;
6803 raid_device
->channel
= RAID_CHANNEL
;
6804 raid_device
->handle
= handle
;
6805 raid_device
->wwid
= wwid
;
6806 _scsih_raid_device_add(ioc
, raid_device
);
6807 rc
= scsi_add_device(ioc
->shost
, RAID_CHANNEL
,
6808 raid_device
->id
, 0);
6810 _scsih_raid_device_remove(ioc
, raid_device
);
6813 case MPI2_RAID_VOL_STATE_INITIALIZING
:
6820 * _scsih_sas_ir_physical_disk_event - PD event
6821 * @ioc: per adapter object
6822 * @fw_event: The fw_event_work object
6828 _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER
*ioc
,
6829 struct fw_event_work
*fw_event
)
6831 u16 handle
, parent_handle
;
6833 struct _sas_device
*sas_device
;
6834 Mpi2ConfigReply_t mpi_reply
;
6835 Mpi2SasDevicePage0_t sas_device_pg0
;
6837 Mpi2EventDataIrPhysicalDisk_t
*event_data
=
6838 (Mpi2EventDataIrPhysicalDisk_t
*) fw_event
->event_data
;
6841 if (ioc
->shost_recovery
)
6844 if (event_data
->ReasonCode
!= MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED
)
6847 handle
= le16_to_cpu(event_data
->PhysDiskDevHandle
);
6848 state
= le32_to_cpu(event_data
->NewValue
);
6850 if (!ioc
->hide_ir_msg
)
6851 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
6852 "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
6853 ioc
->name
, __func__
, handle
,
6854 le32_to_cpu(event_data
->PreviousValue
), state
));
6857 case MPI2_RAID_PD_STATE_ONLINE
:
6858 case MPI2_RAID_PD_STATE_DEGRADED
:
6859 case MPI2_RAID_PD_STATE_REBUILDING
:
6860 case MPI2_RAID_PD_STATE_OPTIMAL
:
6861 case MPI2_RAID_PD_STATE_HOT_SPARE
:
6863 if (!ioc
->is_warpdrive
)
6864 set_bit(handle
, ioc
->pd_handles
);
6866 sas_device
= mpt3sas_get_sdev_by_handle(ioc
, handle
);
6868 sas_device_put(sas_device
);
6872 if ((mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
,
6873 &sas_device_pg0
, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
,
6875 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
6876 ioc
->name
, __FILE__
, __LINE__
, __func__
);
6880 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
6881 MPI2_IOCSTATUS_MASK
;
6882 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
6883 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
6884 ioc
->name
, __FILE__
, __LINE__
, __func__
);
6888 parent_handle
= le16_to_cpu(sas_device_pg0
.ParentDevHandle
);
6889 if (!_scsih_get_sas_address(ioc
, parent_handle
, &sas_address
))
6890 mpt3sas_transport_update_links(ioc
, sas_address
, handle
,
6891 sas_device_pg0
.PhyNum
, MPI2_SAS_NEG_LINK_RATE_1_5
);
6893 _scsih_add_device(ioc
, handle
, 0, 1);
6897 case MPI2_RAID_PD_STATE_OFFLINE
:
6898 case MPI2_RAID_PD_STATE_NOT_CONFIGURED
:
6899 case MPI2_RAID_PD_STATE_NOT_COMPATIBLE
:
6906 * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
6907 * @ioc: per adapter object
6908 * @event_data: event data payload
6914 _scsih_sas_ir_operation_status_event_debug(struct MPT3SAS_ADAPTER
*ioc
,
6915 Mpi2EventDataIrOperationStatus_t
*event_data
)
6917 char *reason_str
= NULL
;
6919 switch (event_data
->RAIDOperation
) {
6920 case MPI2_EVENT_IR_RAIDOP_RESYNC
:
6921 reason_str
= "resync";
6923 case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION
:
6924 reason_str
= "online capacity expansion";
6926 case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK
:
6927 reason_str
= "consistency check";
6929 case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT
:
6930 reason_str
= "background init";
6932 case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT
:
6933 reason_str
= "make data consistent";
6940 pr_info(MPT3SAS_FMT
"raid operational status: (%s)" \
6941 "\thandle(0x%04x), percent complete(%d)\n",
6942 ioc
->name
, reason_str
,
6943 le16_to_cpu(event_data
->VolDevHandle
),
6944 event_data
->PercentComplete
);
6948 * _scsih_sas_ir_operation_status_event - handle RAID operation events
6949 * @ioc: per adapter object
6950 * @fw_event: The fw_event_work object
6956 _scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER
*ioc
,
6957 struct fw_event_work
*fw_event
)
6959 Mpi2EventDataIrOperationStatus_t
*event_data
=
6960 (Mpi2EventDataIrOperationStatus_t
*)
6961 fw_event
->event_data
;
6962 static struct _raid_device
*raid_device
;
6963 unsigned long flags
;
6966 if ((ioc
->logging_level
& MPT_DEBUG_EVENT_WORK_TASK
) &&
6967 (!ioc
->hide_ir_msg
))
6968 _scsih_sas_ir_operation_status_event_debug(ioc
,
6971 /* code added for raid transport support */
6972 if (event_data
->RAIDOperation
== MPI2_EVENT_IR_RAIDOP_RESYNC
) {
6974 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
6975 handle
= le16_to_cpu(event_data
->VolDevHandle
);
6976 raid_device
= mpt3sas_raid_device_find_by_handle(ioc
, handle
);
6978 raid_device
->percent_complete
=
6979 event_data
->PercentComplete
;
6980 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
6985 * _scsih_prep_device_scan - initialize parameters prior to device scan
6986 * @ioc: per adapter object
6988 * Set the deleted flag prior to device scan. If the device is found during
6989 * the scan, then we clear the deleted flag.
6992 _scsih_prep_device_scan(struct MPT3SAS_ADAPTER
*ioc
)
6994 struct MPT3SAS_DEVICE
*sas_device_priv_data
;
6995 struct scsi_device
*sdev
;
6997 shost_for_each_device(sdev
, ioc
->shost
) {
6998 sas_device_priv_data
= sdev
->hostdata
;
6999 if (sas_device_priv_data
&& sas_device_priv_data
->sas_target
)
7000 sas_device_priv_data
->sas_target
->deleted
= 1;
7005 * _scsih_mark_responding_sas_device - mark a sas_devices as responding
7006 * @ioc: per adapter object
7007 * @sas_device_pg0: SAS Device page 0
7009 * After host reset, find out whether devices are still responding.
7010 * Used in _scsih_remove_unresponsive_sas_devices.
7015 _scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER
*ioc
,
7016 Mpi2SasDevicePage0_t
*sas_device_pg0
)
7018 struct MPT3SAS_TARGET
*sas_target_priv_data
= NULL
;
7019 struct scsi_target
*starget
;
7020 struct _sas_device
*sas_device
;
7021 unsigned long flags
;
7023 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
7024 list_for_each_entry(sas_device
, &ioc
->sas_device_list
, list
) {
7025 if ((sas_device
->sas_address
== sas_device_pg0
->SASAddress
) &&
7026 (sas_device
->slot
== sas_device_pg0
->Slot
)) {
7027 sas_device
->responding
= 1;
7028 starget
= sas_device
->starget
;
7029 if (starget
&& starget
->hostdata
) {
7030 sas_target_priv_data
= starget
->hostdata
;
7031 sas_target_priv_data
->tm_busy
= 0;
7032 sas_target_priv_data
->deleted
= 0;
7034 sas_target_priv_data
= NULL
;
7036 starget_printk(KERN_INFO
, starget
,
7037 "handle(0x%04x), sas_addr(0x%016llx)\n",
7038 sas_device_pg0
->DevHandle
,
7039 (unsigned long long)
7040 sas_device
->sas_address
);
7042 if (sas_device
->enclosure_handle
!= 0)
7043 starget_printk(KERN_INFO
, starget
,
7044 "enclosure logical id(0x%016llx),"
7046 (unsigned long long)
7047 sas_device
->enclosure_logical_id
,
7050 if (sas_device_pg0
->Flags
&
7051 MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID
) {
7052 sas_device
->enclosure_level
=
7053 le16_to_cpu(sas_device_pg0
->EnclosureLevel
);
7054 memcpy(&sas_device
->connector_name
[0],
7055 &sas_device_pg0
->ConnectorName
[0], 4);
7057 sas_device
->enclosure_level
= 0;
7058 sas_device
->connector_name
[0] = '\0';
7061 if (sas_device
->handle
== sas_device_pg0
->DevHandle
)
7063 pr_info("\thandle changed from(0x%04x)!!!\n",
7064 sas_device
->handle
);
7065 sas_device
->handle
= sas_device_pg0
->DevHandle
;
7066 if (sas_target_priv_data
)
7067 sas_target_priv_data
->handle
=
7068 sas_device_pg0
->DevHandle
;
7073 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
7077 * _scsih_search_responding_sas_devices -
7078 * @ioc: per adapter object
7080 * After host reset, find out whether devices are still responding.
7086 _scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER
*ioc
)
7088 Mpi2SasDevicePage0_t sas_device_pg0
;
7089 Mpi2ConfigReply_t mpi_reply
;
7094 pr_info(MPT3SAS_FMT
"search for end-devices: start\n", ioc
->name
);
7096 if (list_empty(&ioc
->sas_device_list
))
7100 while (!(mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
,
7101 &sas_device_pg0
, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE
,
7103 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7104 MPI2_IOCSTATUS_MASK
;
7105 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
)
7107 handle
= sas_device_pg0
.DevHandle
=
7108 le16_to_cpu(sas_device_pg0
.DevHandle
);
7109 device_info
= le32_to_cpu(sas_device_pg0
.DeviceInfo
);
7110 if (!(_scsih_is_end_device(device_info
)))
7112 sas_device_pg0
.SASAddress
=
7113 le64_to_cpu(sas_device_pg0
.SASAddress
);
7114 sas_device_pg0
.Slot
= le16_to_cpu(sas_device_pg0
.Slot
);
7115 _scsih_mark_responding_sas_device(ioc
, &sas_device_pg0
);
7119 pr_info(MPT3SAS_FMT
"search for end-devices: complete\n",
7124 * _scsih_mark_responding_raid_device - mark a raid_device as responding
7125 * @ioc: per adapter object
7126 * @wwid: world wide identifier for raid volume
7127 * @handle: device handle
7129 * After host reset, find out whether devices are still responding.
7130 * Used in _scsih_remove_unresponsive_raid_devices.
7135 _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER
*ioc
, u64 wwid
,
7138 struct MPT3SAS_TARGET
*sas_target_priv_data
= NULL
;
7139 struct scsi_target
*starget
;
7140 struct _raid_device
*raid_device
;
7141 unsigned long flags
;
7143 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
7144 list_for_each_entry(raid_device
, &ioc
->raid_device_list
, list
) {
7145 if (raid_device
->wwid
== wwid
&& raid_device
->starget
) {
7146 starget
= raid_device
->starget
;
7147 if (starget
&& starget
->hostdata
) {
7148 sas_target_priv_data
= starget
->hostdata
;
7149 sas_target_priv_data
->deleted
= 0;
7151 sas_target_priv_data
= NULL
;
7152 raid_device
->responding
= 1;
7153 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
7154 starget_printk(KERN_INFO
, raid_device
->starget
,
7155 "handle(0x%04x), wwid(0x%016llx)\n", handle
,
7156 (unsigned long long)raid_device
->wwid
);
7159 * WARPDRIVE: The handles of the PDs might have changed
7160 * across the host reset so re-initialize the
7161 * required data for Direct IO
7163 mpt3sas_init_warpdrive_properties(ioc
, raid_device
);
7164 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
7165 if (raid_device
->handle
== handle
) {
7166 spin_unlock_irqrestore(&ioc
->raid_device_lock
,
7170 pr_info("\thandle changed from(0x%04x)!!!\n",
7171 raid_device
->handle
);
7172 raid_device
->handle
= handle
;
7173 if (sas_target_priv_data
)
7174 sas_target_priv_data
->handle
= handle
;
7175 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
7179 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
7183 * _scsih_search_responding_raid_devices -
7184 * @ioc: per adapter object
7186 * After host reset, find out whether devices are still responding.
7192 _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER
*ioc
)
7194 Mpi2RaidVolPage1_t volume_pg1
;
7195 Mpi2RaidVolPage0_t volume_pg0
;
7196 Mpi2RaidPhysDiskPage0_t pd_pg0
;
7197 Mpi2ConfigReply_t mpi_reply
;
7202 if (!ioc
->ir_firmware
)
7205 pr_info(MPT3SAS_FMT
"search for raid volumes: start\n",
7208 if (list_empty(&ioc
->raid_device_list
))
7212 while (!(mpt3sas_config_get_raid_volume_pg1(ioc
, &mpi_reply
,
7213 &volume_pg1
, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE
, handle
))) {
7214 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7215 MPI2_IOCSTATUS_MASK
;
7216 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
)
7218 handle
= le16_to_cpu(volume_pg1
.DevHandle
);
7220 if (mpt3sas_config_get_raid_volume_pg0(ioc
, &mpi_reply
,
7221 &volume_pg0
, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE
, handle
,
7222 sizeof(Mpi2RaidVolPage0_t
)))
7225 if (volume_pg0
.VolumeState
== MPI2_RAID_VOL_STATE_OPTIMAL
||
7226 volume_pg0
.VolumeState
== MPI2_RAID_VOL_STATE_ONLINE
||
7227 volume_pg0
.VolumeState
== MPI2_RAID_VOL_STATE_DEGRADED
)
7228 _scsih_mark_responding_raid_device(ioc
,
7229 le64_to_cpu(volume_pg1
.WWID
), handle
);
7232 /* refresh the pd_handles */
7233 if (!ioc
->is_warpdrive
) {
7234 phys_disk_num
= 0xFF;
7235 memset(ioc
->pd_handles
, 0, ioc
->pd_handles_sz
);
7236 while (!(mpt3sas_config_get_phys_disk_pg0(ioc
, &mpi_reply
,
7237 &pd_pg0
, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM
,
7239 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7240 MPI2_IOCSTATUS_MASK
;
7241 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
)
7243 phys_disk_num
= pd_pg0
.PhysDiskNum
;
7244 handle
= le16_to_cpu(pd_pg0
.DevHandle
);
7245 set_bit(handle
, ioc
->pd_handles
);
7249 pr_info(MPT3SAS_FMT
"search for responding raid volumes: complete\n",
7254 * _scsih_mark_responding_expander - mark a expander as responding
7255 * @ioc: per adapter object
7256 * @sas_address: sas address
7259 * After host reset, find out whether devices are still responding.
7260 * Used in _scsih_remove_unresponsive_expanders.
7265 _scsih_mark_responding_expander(struct MPT3SAS_ADAPTER
*ioc
, u64 sas_address
,
7268 struct _sas_node
*sas_expander
;
7269 unsigned long flags
;
7272 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
7273 list_for_each_entry(sas_expander
, &ioc
->sas_expander_list
, list
) {
7274 if (sas_expander
->sas_address
!= sas_address
)
7276 sas_expander
->responding
= 1;
7277 if (sas_expander
->handle
== handle
)
7279 pr_info("\texpander(0x%016llx): handle changed" \
7280 " from(0x%04x) to (0x%04x)!!!\n",
7281 (unsigned long long)sas_expander
->sas_address
,
7282 sas_expander
->handle
, handle
);
7283 sas_expander
->handle
= handle
;
7284 for (i
= 0 ; i
< sas_expander
->num_phys
; i
++)
7285 sas_expander
->phy
[i
].handle
= handle
;
7289 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
7293 * _scsih_search_responding_expanders -
7294 * @ioc: per adapter object
7296 * After host reset, find out whether devices are still responding.
7302 _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER
*ioc
)
7304 Mpi2ExpanderPage0_t expander_pg0
;
7305 Mpi2ConfigReply_t mpi_reply
;
7310 pr_info(MPT3SAS_FMT
"search for expanders: start\n", ioc
->name
);
7312 if (list_empty(&ioc
->sas_expander_list
))
7316 while (!(mpt3sas_config_get_expander_pg0(ioc
, &mpi_reply
, &expander_pg0
,
7317 MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL
, handle
))) {
7319 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7320 MPI2_IOCSTATUS_MASK
;
7321 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
)
7324 handle
= le16_to_cpu(expander_pg0
.DevHandle
);
7325 sas_address
= le64_to_cpu(expander_pg0
.SASAddress
);
7326 pr_info("\texpander present: handle(0x%04x), sas_addr(0x%016llx)\n",
7328 (unsigned long long)sas_address
);
7329 _scsih_mark_responding_expander(ioc
, sas_address
, handle
);
7333 pr_info(MPT3SAS_FMT
"search for expanders: complete\n", ioc
->name
);
7337 * _scsih_remove_unresponding_sas_devices - removing unresponding devices
7338 * @ioc: per adapter object
7343 _scsih_remove_unresponding_sas_devices(struct MPT3SAS_ADAPTER
*ioc
)
7345 struct _sas_device
*sas_device
, *sas_device_next
;
7346 struct _sas_node
*sas_expander
, *sas_expander_next
;
7347 struct _raid_device
*raid_device
, *raid_device_next
;
7348 struct list_head tmp_list
;
7349 unsigned long flags
;
7352 pr_info(MPT3SAS_FMT
"removing unresponding devices: start\n",
7355 /* removing unresponding end devices */
7356 pr_info(MPT3SAS_FMT
"removing unresponding devices: end-devices\n",
7359 * Iterate, pulling off devices marked as non-responding. We become the
7360 * owner for the reference the list had on any object we prune.
7362 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
7363 list_for_each_entry_safe(sas_device
, sas_device_next
,
7364 &ioc
->sas_device_list
, list
) {
7365 if (!sas_device
->responding
)
7366 list_move_tail(&sas_device
->list
, &head
);
7368 sas_device
->responding
= 0;
7370 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
7373 * Now, uninitialize and remove the unresponding devices we pruned.
7375 list_for_each_entry_safe(sas_device
, sas_device_next
, &head
, list
) {
7376 _scsih_remove_device(ioc
, sas_device
);
7377 list_del_init(&sas_device
->list
);
7378 sas_device_put(sas_device
);
7381 /* removing unresponding volumes */
7382 if (ioc
->ir_firmware
) {
7383 pr_info(MPT3SAS_FMT
"removing unresponding devices: volumes\n",
7385 list_for_each_entry_safe(raid_device
, raid_device_next
,
7386 &ioc
->raid_device_list
, list
) {
7387 if (!raid_device
->responding
)
7388 _scsih_sas_volume_delete(ioc
,
7389 raid_device
->handle
);
7391 raid_device
->responding
= 0;
7395 /* removing unresponding expanders */
7396 pr_info(MPT3SAS_FMT
"removing unresponding devices: expanders\n",
7398 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
7399 INIT_LIST_HEAD(&tmp_list
);
7400 list_for_each_entry_safe(sas_expander
, sas_expander_next
,
7401 &ioc
->sas_expander_list
, list
) {
7402 if (!sas_expander
->responding
)
7403 list_move_tail(&sas_expander
->list
, &tmp_list
);
7405 sas_expander
->responding
= 0;
7407 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
7408 list_for_each_entry_safe(sas_expander
, sas_expander_next
, &tmp_list
,
7410 list_del(&sas_expander
->list
);
7411 _scsih_expander_node_remove(ioc
, sas_expander
);
7414 pr_info(MPT3SAS_FMT
"removing unresponding devices: complete\n",
7417 /* unblock devices */
7418 _scsih_ublock_io_all_device(ioc
);
7422 _scsih_refresh_expander_links(struct MPT3SAS_ADAPTER
*ioc
,
7423 struct _sas_node
*sas_expander
, u16 handle
)
7425 Mpi2ExpanderPage1_t expander_pg1
;
7426 Mpi2ConfigReply_t mpi_reply
;
7429 for (i
= 0 ; i
< sas_expander
->num_phys
; i
++) {
7430 if ((mpt3sas_config_get_expander_pg1(ioc
, &mpi_reply
,
7431 &expander_pg1
, i
, handle
))) {
7432 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
7433 ioc
->name
, __FILE__
, __LINE__
, __func__
);
7437 mpt3sas_transport_update_links(ioc
, sas_expander
->sas_address
,
7438 le16_to_cpu(expander_pg1
.AttachedDevHandle
), i
,
7439 expander_pg1
.NegotiatedLinkRate
>> 4);
7444 * _scsih_scan_for_devices_after_reset - scan for devices after host reset
7445 * @ioc: per adapter object
7450 _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER
*ioc
)
7452 Mpi2ExpanderPage0_t expander_pg0
;
7453 Mpi2SasDevicePage0_t sas_device_pg0
;
7454 Mpi2RaidVolPage1_t volume_pg1
;
7455 Mpi2RaidVolPage0_t volume_pg0
;
7456 Mpi2RaidPhysDiskPage0_t pd_pg0
;
7457 Mpi2EventIrConfigElement_t element
;
7458 Mpi2ConfigReply_t mpi_reply
;
7461 u16 handle
, parent_handle
;
7463 struct _sas_device
*sas_device
;
7464 struct _sas_node
*expander_device
;
7465 static struct _raid_device
*raid_device
;
7467 unsigned long flags
;
7469 pr_info(MPT3SAS_FMT
"scan devices: start\n", ioc
->name
);
7471 _scsih_sas_host_refresh(ioc
);
7473 pr_info(MPT3SAS_FMT
"\tscan devices: expanders start\n", ioc
->name
);
7477 while (!(mpt3sas_config_get_expander_pg0(ioc
, &mpi_reply
, &expander_pg0
,
7478 MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL
, handle
))) {
7479 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7480 MPI2_IOCSTATUS_MASK
;
7481 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
7482 pr_info(MPT3SAS_FMT
"\tbreak from expander scan: " \
7483 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7484 ioc
->name
, ioc_status
,
7485 le32_to_cpu(mpi_reply
.IOCLogInfo
));
7488 handle
= le16_to_cpu(expander_pg0
.DevHandle
);
7489 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
7490 expander_device
= mpt3sas_scsih_expander_find_by_sas_address(
7491 ioc
, le64_to_cpu(expander_pg0
.SASAddress
));
7492 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
7493 if (expander_device
)
7494 _scsih_refresh_expander_links(ioc
, expander_device
,
7497 pr_info(MPT3SAS_FMT
"\tBEFORE adding expander: " \
7498 "handle (0x%04x), sas_addr(0x%016llx)\n", ioc
->name
,
7499 handle
, (unsigned long long)
7500 le64_to_cpu(expander_pg0
.SASAddress
));
7501 _scsih_expander_add(ioc
, handle
);
7502 pr_info(MPT3SAS_FMT
"\tAFTER adding expander: " \
7503 "handle (0x%04x), sas_addr(0x%016llx)\n", ioc
->name
,
7504 handle
, (unsigned long long)
7505 le64_to_cpu(expander_pg0
.SASAddress
));
7509 pr_info(MPT3SAS_FMT
"\tscan devices: expanders complete\n",
7512 if (!ioc
->ir_firmware
)
7515 pr_info(MPT3SAS_FMT
"\tscan devices: phys disk start\n", ioc
->name
);
7518 phys_disk_num
= 0xFF;
7519 while (!(mpt3sas_config_get_phys_disk_pg0(ioc
, &mpi_reply
,
7520 &pd_pg0
, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM
,
7522 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7523 MPI2_IOCSTATUS_MASK
;
7524 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
7525 pr_info(MPT3SAS_FMT
"\tbreak from phys disk scan: "\
7526 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7527 ioc
->name
, ioc_status
,
7528 le32_to_cpu(mpi_reply
.IOCLogInfo
));
7531 phys_disk_num
= pd_pg0
.PhysDiskNum
;
7532 handle
= le16_to_cpu(pd_pg0
.DevHandle
);
7533 sas_device
= mpt3sas_get_sdev_by_handle(ioc
, handle
);
7535 sas_device_put(sas_device
);
7538 if (mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
,
7539 &sas_device_pg0
, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
,
7542 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7543 MPI2_IOCSTATUS_MASK
;
7544 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
7545 pr_info(MPT3SAS_FMT
"\tbreak from phys disk scan " \
7546 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7547 ioc
->name
, ioc_status
,
7548 le32_to_cpu(mpi_reply
.IOCLogInfo
));
7551 parent_handle
= le16_to_cpu(sas_device_pg0
.ParentDevHandle
);
7552 if (!_scsih_get_sas_address(ioc
, parent_handle
,
7554 pr_info(MPT3SAS_FMT
"\tBEFORE adding phys disk: " \
7555 " handle (0x%04x), sas_addr(0x%016llx)\n",
7556 ioc
->name
, handle
, (unsigned long long)
7557 le64_to_cpu(sas_device_pg0
.SASAddress
));
7558 mpt3sas_transport_update_links(ioc
, sas_address
,
7559 handle
, sas_device_pg0
.PhyNum
,
7560 MPI2_SAS_NEG_LINK_RATE_1_5
);
7561 set_bit(handle
, ioc
->pd_handles
);
7563 /* This will retry adding the end device.
7564 * _scsih_add_device() will decide on retries and
7565 * return "1" when it should be retried
7567 while (_scsih_add_device(ioc
, handle
, retry_count
++,
7571 pr_info(MPT3SAS_FMT
"\tAFTER adding phys disk: " \
7572 " handle (0x%04x), sas_addr(0x%016llx)\n",
7573 ioc
->name
, handle
, (unsigned long long)
7574 le64_to_cpu(sas_device_pg0
.SASAddress
));
7578 pr_info(MPT3SAS_FMT
"\tscan devices: phys disk complete\n",
7581 pr_info(MPT3SAS_FMT
"\tscan devices: volumes start\n", ioc
->name
);
7585 while (!(mpt3sas_config_get_raid_volume_pg1(ioc
, &mpi_reply
,
7586 &volume_pg1
, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE
, handle
))) {
7587 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7588 MPI2_IOCSTATUS_MASK
;
7589 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
7590 pr_info(MPT3SAS_FMT
"\tbreak from volume scan: " \
7591 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7592 ioc
->name
, ioc_status
,
7593 le32_to_cpu(mpi_reply
.IOCLogInfo
));
7596 handle
= le16_to_cpu(volume_pg1
.DevHandle
);
7597 spin_lock_irqsave(&ioc
->raid_device_lock
, flags
);
7598 raid_device
= _scsih_raid_device_find_by_wwid(ioc
,
7599 le64_to_cpu(volume_pg1
.WWID
));
7600 spin_unlock_irqrestore(&ioc
->raid_device_lock
, flags
);
7603 if (mpt3sas_config_get_raid_volume_pg0(ioc
, &mpi_reply
,
7604 &volume_pg0
, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE
, handle
,
7605 sizeof(Mpi2RaidVolPage0_t
)))
7607 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7608 MPI2_IOCSTATUS_MASK
;
7609 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
7610 pr_info(MPT3SAS_FMT
"\tbreak from volume scan: " \
7611 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7612 ioc
->name
, ioc_status
,
7613 le32_to_cpu(mpi_reply
.IOCLogInfo
));
7616 if (volume_pg0
.VolumeState
== MPI2_RAID_VOL_STATE_OPTIMAL
||
7617 volume_pg0
.VolumeState
== MPI2_RAID_VOL_STATE_ONLINE
||
7618 volume_pg0
.VolumeState
== MPI2_RAID_VOL_STATE_DEGRADED
) {
7619 memset(&element
, 0, sizeof(Mpi2EventIrConfigElement_t
));
7620 element
.ReasonCode
= MPI2_EVENT_IR_CHANGE_RC_ADDED
;
7621 element
.VolDevHandle
= volume_pg1
.DevHandle
;
7623 "\tBEFORE adding volume: handle (0x%04x)\n",
7624 ioc
->name
, volume_pg1
.DevHandle
);
7625 _scsih_sas_volume_add(ioc
, &element
);
7627 "\tAFTER adding volume: handle (0x%04x)\n",
7628 ioc
->name
, volume_pg1
.DevHandle
);
7632 pr_info(MPT3SAS_FMT
"\tscan devices: volumes complete\n",
7637 pr_info(MPT3SAS_FMT
"\tscan devices: end devices start\n",
7642 while (!(mpt3sas_config_get_sas_device_pg0(ioc
, &mpi_reply
,
7643 &sas_device_pg0
, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE
,
7645 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
7646 MPI2_IOCSTATUS_MASK
;
7647 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
7648 pr_info(MPT3SAS_FMT
"\tbreak from end device scan:"\
7649 " ioc_status(0x%04x), loginfo(0x%08x)\n",
7650 ioc
->name
, ioc_status
,
7651 le32_to_cpu(mpi_reply
.IOCLogInfo
));
7654 handle
= le16_to_cpu(sas_device_pg0
.DevHandle
);
7655 if (!(_scsih_is_end_device(
7656 le32_to_cpu(sas_device_pg0
.DeviceInfo
))))
7658 sas_device
= mpt3sas_get_sdev_by_addr(ioc
,
7659 le64_to_cpu(sas_device_pg0
.SASAddress
));
7661 sas_device_put(sas_device
);
7664 parent_handle
= le16_to_cpu(sas_device_pg0
.ParentDevHandle
);
7665 if (!_scsih_get_sas_address(ioc
, parent_handle
, &sas_address
)) {
7666 pr_info(MPT3SAS_FMT
"\tBEFORE adding end device: " \
7667 "handle (0x%04x), sas_addr(0x%016llx)\n", ioc
->name
,
7668 handle
, (unsigned long long)
7669 le64_to_cpu(sas_device_pg0
.SASAddress
));
7670 mpt3sas_transport_update_links(ioc
, sas_address
, handle
,
7671 sas_device_pg0
.PhyNum
, MPI2_SAS_NEG_LINK_RATE_1_5
);
7673 /* This will retry adding the end device.
7674 * _scsih_add_device() will decide on retries and
7675 * return "1" when it should be retried
7677 while (_scsih_add_device(ioc
, handle
, retry_count
++,
7681 pr_info(MPT3SAS_FMT
"\tAFTER adding end device: " \
7682 "handle (0x%04x), sas_addr(0x%016llx)\n", ioc
->name
,
7683 handle
, (unsigned long long)
7684 le64_to_cpu(sas_device_pg0
.SASAddress
));
7687 pr_info(MPT3SAS_FMT
"\tscan devices: end devices complete\n",
7690 pr_info(MPT3SAS_FMT
"scan devices: complete\n", ioc
->name
);
7693 * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
7694 * @ioc: per adapter object
7695 * @reset_phase: phase
7697 * The handler for doing any required cleanup or initialization.
7699 * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET,
7700 * MPT3_IOC_DONE_RESET
7705 mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER
*ioc
, int reset_phase
)
7707 switch (reset_phase
) {
7708 case MPT3_IOC_PRE_RESET
:
7709 dtmprintk(ioc
, pr_info(MPT3SAS_FMT
7710 "%s: MPT3_IOC_PRE_RESET\n", ioc
->name
, __func__
));
7712 case MPT3_IOC_AFTER_RESET
:
7713 dtmprintk(ioc
, pr_info(MPT3SAS_FMT
7714 "%s: MPT3_IOC_AFTER_RESET\n", ioc
->name
, __func__
));
7715 if (ioc
->scsih_cmds
.status
& MPT3_CMD_PENDING
) {
7716 ioc
->scsih_cmds
.status
|= MPT3_CMD_RESET
;
7717 mpt3sas_base_free_smid(ioc
, ioc
->scsih_cmds
.smid
);
7718 complete(&ioc
->scsih_cmds
.done
);
7720 if (ioc
->tm_cmds
.status
& MPT3_CMD_PENDING
) {
7721 ioc
->tm_cmds
.status
|= MPT3_CMD_RESET
;
7722 mpt3sas_base_free_smid(ioc
, ioc
->tm_cmds
.smid
);
7723 complete(&ioc
->tm_cmds
.done
);
7726 _scsih_fw_event_cleanup_queue(ioc
);
7727 _scsih_flush_running_cmds(ioc
);
7729 case MPT3_IOC_DONE_RESET
:
7730 dtmprintk(ioc
, pr_info(MPT3SAS_FMT
7731 "%s: MPT3_IOC_DONE_RESET\n", ioc
->name
, __func__
));
7732 if ((!ioc
->is_driver_loading
) && !(disable_discovery
> 0 &&
7733 !ioc
->sas_hba
.num_phys
)) {
7734 _scsih_prep_device_scan(ioc
);
7735 _scsih_search_responding_sas_devices(ioc
);
7736 _scsih_search_responding_raid_devices(ioc
);
7737 _scsih_search_responding_expanders(ioc
);
7738 _scsih_error_recovery_delete_devices(ioc
);
7745 * _mpt3sas_fw_work - delayed task for processing firmware events
7746 * @ioc: per adapter object
7747 * @fw_event: The fw_event_work object
7753 _mpt3sas_fw_work(struct MPT3SAS_ADAPTER
*ioc
, struct fw_event_work
*fw_event
)
7755 _scsih_fw_event_del_from_list(ioc
, fw_event
);
7757 /* the queue is being flushed so ignore this event */
7758 if (ioc
->remove_host
|| ioc
->pci_error_recovery
) {
7759 fw_event_work_put(fw_event
);
7763 switch (fw_event
->event
) {
7764 case MPT3SAS_PROCESS_TRIGGER_DIAG
:
7765 mpt3sas_process_trigger_data(ioc
,
7766 (struct SL_WH_TRIGGERS_EVENT_DATA_T
*)
7767 fw_event
->event_data
);
7769 case MPT3SAS_REMOVE_UNRESPONDING_DEVICES
:
7770 while (scsi_host_in_recovery(ioc
->shost
) ||
7771 ioc
->shost_recovery
) {
7773 * If we're unloading, bail. Otherwise, this can become
7776 if (ioc
->remove_host
)
7780 _scsih_remove_unresponding_sas_devices(ioc
);
7781 _scsih_scan_for_devices_after_reset(ioc
);
7783 case MPT3SAS_PORT_ENABLE_COMPLETE
:
7784 ioc
->start_scan
= 0;
7785 if (missing_delay
[0] != -1 && missing_delay
[1] != -1)
7786 mpt3sas_base_update_missing_delay(ioc
, missing_delay
[0],
7788 dewtprintk(ioc
, pr_info(MPT3SAS_FMT
7789 "port enable: complete from worker thread\n",
7792 case MPT3SAS_TURN_ON_PFA_LED
:
7793 _scsih_turn_on_pfa_led(ioc
, fw_event
->device_handle
);
7795 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
:
7796 _scsih_sas_topology_change_event(ioc
, fw_event
);
7798 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
:
7799 _scsih_sas_device_status_change_event(ioc
, fw_event
);
7801 case MPI2_EVENT_SAS_DISCOVERY
:
7802 _scsih_sas_discovery_event(ioc
, fw_event
);
7804 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE
:
7805 _scsih_sas_broadcast_primitive_event(ioc
, fw_event
);
7807 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
:
7808 _scsih_sas_enclosure_dev_status_change_event(ioc
,
7811 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST
:
7812 _scsih_sas_ir_config_change_event(ioc
, fw_event
);
7814 case MPI2_EVENT_IR_VOLUME
:
7815 _scsih_sas_ir_volume_event(ioc
, fw_event
);
7817 case MPI2_EVENT_IR_PHYSICAL_DISK
:
7818 _scsih_sas_ir_physical_disk_event(ioc
, fw_event
);
7820 case MPI2_EVENT_IR_OPERATION_STATUS
:
7821 _scsih_sas_ir_operation_status_event(ioc
, fw_event
);
7825 fw_event_work_put(fw_event
);
7829 * _firmware_event_work
7830 * @ioc: per adapter object
7831 * @work: The fw_event_work object
7834 * wrappers for the work thread handling firmware events
7840 _firmware_event_work(struct work_struct
*work
)
7842 struct fw_event_work
*fw_event
= container_of(work
,
7843 struct fw_event_work
, work
);
7845 _mpt3sas_fw_work(fw_event
->ioc
, fw_event
);
7849 * mpt3sas_scsih_event_callback - firmware event handler (called at ISR time)
7850 * @ioc: per adapter object
7851 * @msix_index: MSIX table index supplied by the OS
7852 * @reply: reply message frame(lower 32bit addr)
7853 * Context: interrupt.
7855 * This function merely adds a new work task into ioc->firmware_event_thread.
7856 * The tasks are worked from _firmware_event_work in user context.
7858 * Return 1 meaning mf should be freed from _base_interrupt
7859 * 0 means the mf is freed from this function.
7862 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER
*ioc
, u8 msix_index
,
7865 struct fw_event_work
*fw_event
;
7866 Mpi2EventNotificationReply_t
*mpi_reply
;
7869 Mpi26EventDataActiveCableExcept_t
*ActiveCableEventData
;
7871 /* events turned off due to host reset or driver unloading */
7872 if (ioc
->remove_host
|| ioc
->pci_error_recovery
)
7875 mpi_reply
= mpt3sas_base_get_reply_virt_addr(ioc
, reply
);
7877 if (unlikely(!mpi_reply
)) {
7878 pr_err(MPT3SAS_FMT
"mpi_reply not valid at %s:%d/%s()!\n",
7879 ioc
->name
, __FILE__
, __LINE__
, __func__
);
7883 event
= le16_to_cpu(mpi_reply
->Event
);
7885 if (event
!= MPI2_EVENT_LOG_ENTRY_ADDED
)
7886 mpt3sas_trigger_event(ioc
, event
, 0);
7890 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE
:
7892 Mpi2EventDataSasBroadcastPrimitive_t
*baen_data
=
7893 (Mpi2EventDataSasBroadcastPrimitive_t
*)
7894 mpi_reply
->EventData
;
7896 if (baen_data
->Primitive
!=
7897 MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT
)
7900 if (ioc
->broadcast_aen_busy
) {
7901 ioc
->broadcast_aen_pending
++;
7904 ioc
->broadcast_aen_busy
= 1;
7908 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
:
7909 _scsih_check_topo_delete_events(ioc
,
7910 (Mpi2EventDataSasTopologyChangeList_t
*)
7911 mpi_reply
->EventData
);
7913 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST
:
7914 _scsih_check_ir_config_unhide_events(ioc
,
7915 (Mpi2EventDataIrConfigChangeList_t
*)
7916 mpi_reply
->EventData
);
7918 case MPI2_EVENT_IR_VOLUME
:
7919 _scsih_check_volume_delete_events(ioc
,
7920 (Mpi2EventDataIrVolume_t
*)
7921 mpi_reply
->EventData
);
7923 case MPI2_EVENT_LOG_ENTRY_ADDED
:
7925 Mpi2EventDataLogEntryAdded_t
*log_entry
;
7928 if (!ioc
->is_warpdrive
)
7931 log_entry
= (Mpi2EventDataLogEntryAdded_t
*)
7932 mpi_reply
->EventData
;
7933 log_code
= (u32
*)log_entry
->LogData
;
7935 if (le16_to_cpu(log_entry
->LogEntryQualifier
)
7936 != MPT2_WARPDRIVE_LOGENTRY
)
7939 switch (le32_to_cpu(*log_code
)) {
7940 case MPT2_WARPDRIVE_LC_SSDT
:
7941 pr_warn(MPT3SAS_FMT
"WarpDrive Warning: "
7942 "IO Throttling has occurred in the WarpDrive "
7943 "subsystem. Check WarpDrive documentation for "
7944 "additional details.\n", ioc
->name
);
7946 case MPT2_WARPDRIVE_LC_SSDLW
:
7947 pr_warn(MPT3SAS_FMT
"WarpDrive Warning: "
7948 "Program/Erase Cycles for the WarpDrive subsystem "
7949 "in degraded range. Check WarpDrive documentation "
7950 "for additional details.\n", ioc
->name
);
7952 case MPT2_WARPDRIVE_LC_SSDLF
:
7953 pr_err(MPT3SAS_FMT
"WarpDrive Fatal Error: "
7954 "There are no Program/Erase Cycles for the "
7955 "WarpDrive subsystem. The storage device will be "
7956 "in read-only mode. Check WarpDrive documentation "
7957 "for additional details.\n", ioc
->name
);
7959 case MPT2_WARPDRIVE_LC_BRMF
:
7960 pr_err(MPT3SAS_FMT
"WarpDrive Fatal Error: "
7961 "The Backup Rail Monitor has failed on the "
7962 "WarpDrive subsystem. Check WarpDrive "
7963 "documentation for additional details.\n",
7970 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
:
7971 case MPI2_EVENT_IR_OPERATION_STATUS
:
7972 case MPI2_EVENT_SAS_DISCOVERY
:
7973 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
:
7974 case MPI2_EVENT_IR_PHYSICAL_DISK
:
7977 case MPI2_EVENT_TEMP_THRESHOLD
:
7978 _scsih_temp_threshold_events(ioc
,
7979 (Mpi2EventDataTemperature_t
*)
7980 mpi_reply
->EventData
);
7982 case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION
:
7983 ActiveCableEventData
=
7984 (Mpi26EventDataActiveCableExcept_t
*) mpi_reply
->EventData
;
7985 if (ActiveCableEventData
->ReasonCode
==
7986 MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER
) {
7987 pr_info(MPT3SAS_FMT
"Currently an active cable with ReceptacleID %d",
7988 ioc
->name
, ActiveCableEventData
->ReceptacleID
);
7989 pr_info("cannot be powered and devices connected to this active cable");
7990 pr_info("will not be seen. This active cable");
7991 pr_info("requires %d mW of power",
7992 ActiveCableEventData
->ActiveCablePowerRequirement
);
7996 default: /* ignore the rest */
8000 sz
= le16_to_cpu(mpi_reply
->EventDataLength
) * 4;
8001 fw_event
= alloc_fw_event_work(sz
);
8003 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
8004 ioc
->name
, __FILE__
, __LINE__
, __func__
);
8008 memcpy(fw_event
->event_data
, mpi_reply
->EventData
, sz
);
8009 fw_event
->ioc
= ioc
;
8010 fw_event
->VF_ID
= mpi_reply
->VF_ID
;
8011 fw_event
->VP_ID
= mpi_reply
->VP_ID
;
8012 fw_event
->event
= event
;
8013 _scsih_fw_event_add(ioc
, fw_event
);
8014 fw_event_work_put(fw_event
);
8019 * _scsih_expander_node_remove - removing expander device from list.
8020 * @ioc: per adapter object
8021 * @sas_expander: the sas_device object
8022 * Context: Calling function should acquire ioc->sas_node_lock.
8024 * Removing object and freeing associated memory from the
8025 * ioc->sas_expander_list.
8030 _scsih_expander_node_remove(struct MPT3SAS_ADAPTER
*ioc
,
8031 struct _sas_node
*sas_expander
)
8033 struct _sas_port
*mpt3sas_port
, *next
;
8035 /* remove sibling ports attached to this expander */
8036 list_for_each_entry_safe(mpt3sas_port
, next
,
8037 &sas_expander
->sas_port_list
, port_list
) {
8038 if (ioc
->shost_recovery
)
8040 if (mpt3sas_port
->remote_identify
.device_type
==
8042 mpt3sas_device_remove_by_sas_address(ioc
,
8043 mpt3sas_port
->remote_identify
.sas_address
);
8044 else if (mpt3sas_port
->remote_identify
.device_type
==
8045 SAS_EDGE_EXPANDER_DEVICE
||
8046 mpt3sas_port
->remote_identify
.device_type
==
8047 SAS_FANOUT_EXPANDER_DEVICE
)
8048 mpt3sas_expander_remove(ioc
,
8049 mpt3sas_port
->remote_identify
.sas_address
);
8052 mpt3sas_transport_port_remove(ioc
, sas_expander
->sas_address
,
8053 sas_expander
->sas_address_parent
);
8056 "expander_remove: handle(0x%04x), sas_addr(0x%016llx)\n",
8058 sas_expander
->handle
, (unsigned long long)
8059 sas_expander
->sas_address
);
8061 kfree(sas_expander
->phy
);
8062 kfree(sas_expander
);
8066 * _scsih_ir_shutdown - IR shutdown notification
8067 * @ioc: per adapter object
8069 * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
8070 * the host system is shutting down.
8075 _scsih_ir_shutdown(struct MPT3SAS_ADAPTER
*ioc
)
8077 Mpi2RaidActionRequest_t
*mpi_request
;
8078 Mpi2RaidActionReply_t
*mpi_reply
;
8081 /* is IR firmware build loaded ? */
8082 if (!ioc
->ir_firmware
)
8085 /* are there any volumes ? */
8086 if (list_empty(&ioc
->raid_device_list
))
8089 mutex_lock(&ioc
->scsih_cmds
.mutex
);
8091 if (ioc
->scsih_cmds
.status
!= MPT3_CMD_NOT_USED
) {
8092 pr_err(MPT3SAS_FMT
"%s: scsih_cmd in use\n",
8093 ioc
->name
, __func__
);
8096 ioc
->scsih_cmds
.status
= MPT3_CMD_PENDING
;
8098 smid
= mpt3sas_base_get_smid(ioc
, ioc
->scsih_cb_idx
);
8100 pr_err(MPT3SAS_FMT
"%s: failed obtaining a smid\n",
8101 ioc
->name
, __func__
);
8102 ioc
->scsih_cmds
.status
= MPT3_CMD_NOT_USED
;
8106 mpi_request
= mpt3sas_base_get_msg_frame(ioc
, smid
);
8107 ioc
->scsih_cmds
.smid
= smid
;
8108 memset(mpi_request
, 0, sizeof(Mpi2RaidActionRequest_t
));
8110 mpi_request
->Function
= MPI2_FUNCTION_RAID_ACTION
;
8111 mpi_request
->Action
= MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED
;
8113 if (!ioc
->hide_ir_msg
)
8114 pr_info(MPT3SAS_FMT
"IR shutdown (sending)\n", ioc
->name
);
8115 init_completion(&ioc
->scsih_cmds
.done
);
8116 mpt3sas_base_put_smid_default(ioc
, smid
);
8117 wait_for_completion_timeout(&ioc
->scsih_cmds
.done
, 10*HZ
);
8119 if (!(ioc
->scsih_cmds
.status
& MPT3_CMD_COMPLETE
)) {
8120 pr_err(MPT3SAS_FMT
"%s: timeout\n",
8121 ioc
->name
, __func__
);
8125 if (ioc
->scsih_cmds
.status
& MPT3_CMD_REPLY_VALID
) {
8126 mpi_reply
= ioc
->scsih_cmds
.reply
;
8127 if (!ioc
->hide_ir_msg
)
8128 pr_info(MPT3SAS_FMT
"IR shutdown "
8129 "(complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
8130 ioc
->name
, le16_to_cpu(mpi_reply
->IOCStatus
),
8131 le32_to_cpu(mpi_reply
->IOCLogInfo
));
8135 ioc
->scsih_cmds
.status
= MPT3_CMD_NOT_USED
;
8136 mutex_unlock(&ioc
->scsih_cmds
.mutex
);
8140 * scsih_remove - detach and remove add host
8141 * @pdev: PCI device struct
8143 * Routine called when unloading the driver.
8146 static void scsih_remove(struct pci_dev
*pdev
)
8148 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8149 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
8150 struct _sas_port
*mpt3sas_port
, *next_port
;
8151 struct _raid_device
*raid_device
, *next
;
8152 struct MPT3SAS_TARGET
*sas_target_priv_data
;
8153 struct workqueue_struct
*wq
;
8154 unsigned long flags
;
8156 ioc
->remove_host
= 1;
8157 _scsih_fw_event_cleanup_queue(ioc
);
8159 spin_lock_irqsave(&ioc
->fw_event_lock
, flags
);
8160 wq
= ioc
->firmware_event_thread
;
8161 ioc
->firmware_event_thread
= NULL
;
8162 spin_unlock_irqrestore(&ioc
->fw_event_lock
, flags
);
8164 destroy_workqueue(wq
);
8166 /* release all the volumes */
8167 _scsih_ir_shutdown(ioc
);
8168 list_for_each_entry_safe(raid_device
, next
, &ioc
->raid_device_list
,
8170 if (raid_device
->starget
) {
8171 sas_target_priv_data
=
8172 raid_device
->starget
->hostdata
;
8173 sas_target_priv_data
->deleted
= 1;
8174 scsi_remove_target(&raid_device
->starget
->dev
);
8176 pr_info(MPT3SAS_FMT
"removing handle(0x%04x), wwid(0x%016llx)\n",
8177 ioc
->name
, raid_device
->handle
,
8178 (unsigned long long) raid_device
->wwid
);
8179 _scsih_raid_device_remove(ioc
, raid_device
);
8182 /* free ports attached to the sas_host */
8183 list_for_each_entry_safe(mpt3sas_port
, next_port
,
8184 &ioc
->sas_hba
.sas_port_list
, port_list
) {
8185 if (mpt3sas_port
->remote_identify
.device_type
==
8187 mpt3sas_device_remove_by_sas_address(ioc
,
8188 mpt3sas_port
->remote_identify
.sas_address
);
8189 else if (mpt3sas_port
->remote_identify
.device_type
==
8190 SAS_EDGE_EXPANDER_DEVICE
||
8191 mpt3sas_port
->remote_identify
.device_type
==
8192 SAS_FANOUT_EXPANDER_DEVICE
)
8193 mpt3sas_expander_remove(ioc
,
8194 mpt3sas_port
->remote_identify
.sas_address
);
8197 /* free phys attached to the sas_host */
8198 if (ioc
->sas_hba
.num_phys
) {
8199 kfree(ioc
->sas_hba
.phy
);
8200 ioc
->sas_hba
.phy
= NULL
;
8201 ioc
->sas_hba
.num_phys
= 0;
8204 sas_remove_host(shost
);
8205 scsi_remove_host(shost
);
8206 mpt3sas_base_detach(ioc
);
8207 spin_lock(&gioc_lock
);
8208 list_del(&ioc
->list
);
8209 spin_unlock(&gioc_lock
);
8210 scsi_host_put(shost
);
8214 * scsih_shutdown - routine call during system shutdown
8215 * @pdev: PCI device struct
8220 scsih_shutdown(struct pci_dev
*pdev
)
8222 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8223 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
8224 struct workqueue_struct
*wq
;
8225 unsigned long flags
;
8227 ioc
->remove_host
= 1;
8228 _scsih_fw_event_cleanup_queue(ioc
);
8230 spin_lock_irqsave(&ioc
->fw_event_lock
, flags
);
8231 wq
= ioc
->firmware_event_thread
;
8232 ioc
->firmware_event_thread
= NULL
;
8233 spin_unlock_irqrestore(&ioc
->fw_event_lock
, flags
);
8235 destroy_workqueue(wq
);
8237 _scsih_ir_shutdown(ioc
);
8238 mpt3sas_base_detach(ioc
);
8243 * _scsih_probe_boot_devices - reports 1st device
8244 * @ioc: per adapter object
8246 * If specified in bios page 2, this routine reports the 1st
8247 * device scsi-ml or sas transport for persistent boot device
8248 * purposes. Please refer to function _scsih_determine_boot_device()
8251 _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER
*ioc
)
8255 struct _sas_device
*sas_device
;
8256 struct _raid_device
*raid_device
;
8258 u64 sas_address_parent
;
8260 unsigned long flags
;
8263 /* no Bios, return immediately */
8264 if (!ioc
->bios_pg3
.BiosVersion
)
8269 if (ioc
->req_boot_device
.device
) {
8270 device
= ioc
->req_boot_device
.device
;
8271 is_raid
= ioc
->req_boot_device
.is_raid
;
8272 } else if (ioc
->req_alt_boot_device
.device
) {
8273 device
= ioc
->req_alt_boot_device
.device
;
8274 is_raid
= ioc
->req_alt_boot_device
.is_raid
;
8275 } else if (ioc
->current_boot_device
.device
) {
8276 device
= ioc
->current_boot_device
.device
;
8277 is_raid
= ioc
->current_boot_device
.is_raid
;
8284 raid_device
= device
;
8285 rc
= scsi_add_device(ioc
->shost
, RAID_CHANNEL
,
8286 raid_device
->id
, 0);
8288 _scsih_raid_device_remove(ioc
, raid_device
);
8290 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
8291 sas_device
= device
;
8292 handle
= sas_device
->handle
;
8293 sas_address_parent
= sas_device
->sas_address_parent
;
8294 sas_address
= sas_device
->sas_address
;
8295 list_move_tail(&sas_device
->list
, &ioc
->sas_device_list
);
8296 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
8298 if (ioc
->hide_drives
)
8300 if (!mpt3sas_transport_port_add(ioc
, handle
,
8301 sas_address_parent
)) {
8302 _scsih_sas_device_remove(ioc
, sas_device
);
8303 } else if (!sas_device
->starget
) {
8304 if (!ioc
->is_driver_loading
) {
8305 mpt3sas_transport_port_remove(ioc
,
8307 sas_address_parent
);
8308 _scsih_sas_device_remove(ioc
, sas_device
);
8315 * _scsih_probe_raid - reporting raid volumes to scsi-ml
8316 * @ioc: per adapter object
8318 * Called during initial loading of the driver.
8321 _scsih_probe_raid(struct MPT3SAS_ADAPTER
*ioc
)
8323 struct _raid_device
*raid_device
, *raid_next
;
8326 list_for_each_entry_safe(raid_device
, raid_next
,
8327 &ioc
->raid_device_list
, list
) {
8328 if (raid_device
->starget
)
8330 rc
= scsi_add_device(ioc
->shost
, RAID_CHANNEL
,
8331 raid_device
->id
, 0);
8333 _scsih_raid_device_remove(ioc
, raid_device
);
8337 static struct _sas_device
*get_next_sas_device(struct MPT3SAS_ADAPTER
*ioc
)
8339 struct _sas_device
*sas_device
= NULL
;
8340 unsigned long flags
;
8342 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
8343 if (!list_empty(&ioc
->sas_device_init_list
)) {
8344 sas_device
= list_first_entry(&ioc
->sas_device_init_list
,
8345 struct _sas_device
, list
);
8346 sas_device_get(sas_device
);
8348 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
8353 static void sas_device_make_active(struct MPT3SAS_ADAPTER
*ioc
,
8354 struct _sas_device
*sas_device
)
8356 unsigned long flags
;
8358 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
8361 * Since we dropped the lock during the call to port_add(), we need to
8362 * be careful here that somebody else didn't move or delete this item
8363 * while we were busy with other things.
8365 * If it was on the list, we need a put() for the reference the list
8366 * had. Either way, we need a get() for the destination list.
8368 if (!list_empty(&sas_device
->list
)) {
8369 list_del_init(&sas_device
->list
);
8370 sas_device_put(sas_device
);
8373 sas_device_get(sas_device
);
8374 list_add_tail(&sas_device
->list
, &ioc
->sas_device_list
);
8376 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
8380 * _scsih_probe_sas - reporting sas devices to sas transport
8381 * @ioc: per adapter object
8383 * Called during initial loading of the driver.
8386 _scsih_probe_sas(struct MPT3SAS_ADAPTER
*ioc
)
8388 struct _sas_device
*sas_device
;
8390 if (ioc
->hide_drives
)
8393 while ((sas_device
= get_next_sas_device(ioc
))) {
8394 if (!mpt3sas_transport_port_add(ioc
, sas_device
->handle
,
8395 sas_device
->sas_address_parent
)) {
8396 _scsih_sas_device_remove(ioc
, sas_device
);
8397 sas_device_put(sas_device
);
8399 } else if (!sas_device
->starget
) {
8401 * When asyn scanning is enabled, its not possible to
8402 * remove devices while scanning is turned on due to an
8403 * oops in scsi_sysfs_add_sdev()->add_device()->
8404 * sysfs_addrm_start()
8406 if (!ioc
->is_driver_loading
) {
8407 mpt3sas_transport_port_remove(ioc
,
8408 sas_device
->sas_address
,
8409 sas_device
->sas_address_parent
);
8410 _scsih_sas_device_remove(ioc
, sas_device
);
8411 sas_device_put(sas_device
);
8415 sas_device_make_active(ioc
, sas_device
);
8416 sas_device_put(sas_device
);
8421 * _scsih_probe_devices - probing for devices
8422 * @ioc: per adapter object
8424 * Called during initial loading of the driver.
8427 _scsih_probe_devices(struct MPT3SAS_ADAPTER
*ioc
)
8429 u16 volume_mapping_flags
;
8431 if (!(ioc
->facts
.ProtocolFlags
& MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR
))
8432 return; /* return when IOC doesn't support initiator mode */
8434 _scsih_probe_boot_devices(ioc
);
8436 if (ioc
->ir_firmware
) {
8437 volume_mapping_flags
=
8438 le16_to_cpu(ioc
->ioc_pg8
.IRVolumeMappingFlags
) &
8439 MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE
;
8440 if (volume_mapping_flags
==
8441 MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING
) {
8442 _scsih_probe_raid(ioc
);
8443 _scsih_probe_sas(ioc
);
8445 _scsih_probe_sas(ioc
);
8446 _scsih_probe_raid(ioc
);
8449 _scsih_probe_sas(ioc
);
8453 * scsih_scan_start - scsi lld callback for .scan_start
8454 * @shost: SCSI host pointer
8456 * The shost has the ability to discover targets on its own instead
8457 * of scanning the entire bus. In our implemention, we will kick off
8458 * firmware discovery.
8461 scsih_scan_start(struct Scsi_Host
*shost
)
8463 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
8465 if (diag_buffer_enable
!= -1 && diag_buffer_enable
!= 0)
8466 mpt3sas_enable_diag_buffer(ioc
, diag_buffer_enable
);
8468 if (disable_discovery
> 0)
8471 ioc
->start_scan
= 1;
8472 rc
= mpt3sas_port_enable(ioc
);
8475 pr_info(MPT3SAS_FMT
"port enable: FAILED\n", ioc
->name
);
8479 * scsih_scan_finished - scsi lld callback for .scan_finished
8480 * @shost: SCSI host pointer
8481 * @time: elapsed time of the scan in jiffies
8483 * This function will be called periodicallyn until it returns 1 with the
8484 * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
8485 * we wait for firmware discovery to complete, then return 1.
8488 scsih_scan_finished(struct Scsi_Host
*shost
, unsigned long time
)
8490 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
8492 if (disable_discovery
> 0) {
8493 ioc
->is_driver_loading
= 0;
8494 ioc
->wait_for_discovery_to_complete
= 0;
8498 if (time
>= (300 * HZ
)) {
8499 ioc
->base_cmds
.status
= MPT3_CMD_NOT_USED
;
8501 "port enable: FAILED with timeout (timeout=300s)\n",
8503 ioc
->is_driver_loading
= 0;
8507 if (ioc
->start_scan
)
8510 if (ioc
->start_scan_failed
) {
8512 "port enable: FAILED with (ioc_status=0x%08x)\n",
8513 ioc
->name
, ioc
->start_scan_failed
);
8514 ioc
->is_driver_loading
= 0;
8515 ioc
->wait_for_discovery_to_complete
= 0;
8516 ioc
->remove_host
= 1;
8520 pr_info(MPT3SAS_FMT
"port enable: SUCCESS\n", ioc
->name
);
8521 ioc
->base_cmds
.status
= MPT3_CMD_NOT_USED
;
8523 if (ioc
->wait_for_discovery_to_complete
) {
8524 ioc
->wait_for_discovery_to_complete
= 0;
8525 _scsih_probe_devices(ioc
);
8527 mpt3sas_base_start_watchdog(ioc
);
8528 ioc
->is_driver_loading
= 0;
8532 /* shost template for SAS 2.0 HBA devices */
8533 static struct scsi_host_template mpt2sas_driver_template
= {
8534 .module
= THIS_MODULE
,
8535 .name
= "Fusion MPT SAS Host",
8536 .proc_name
= MPT2SAS_DRIVER_NAME
,
8537 .queuecommand
= scsih_qcmd
,
8538 .target_alloc
= scsih_target_alloc
,
8539 .slave_alloc
= scsih_slave_alloc
,
8540 .slave_configure
= scsih_slave_configure
,
8541 .target_destroy
= scsih_target_destroy
,
8542 .slave_destroy
= scsih_slave_destroy
,
8543 .scan_finished
= scsih_scan_finished
,
8544 .scan_start
= scsih_scan_start
,
8545 .change_queue_depth
= scsih_change_queue_depth
,
8546 .eh_abort_handler
= scsih_abort
,
8547 .eh_device_reset_handler
= scsih_dev_reset
,
8548 .eh_target_reset_handler
= scsih_target_reset
,
8549 .eh_host_reset_handler
= scsih_host_reset
,
8550 .bios_param
= scsih_bios_param
,
8553 .sg_tablesize
= MPT2SAS_SG_DEPTH
,
8554 .max_sectors
= 32767,
8556 .use_clustering
= ENABLE_CLUSTERING
,
8557 .shost_attrs
= mpt3sas_host_attrs
,
8558 .sdev_attrs
= mpt3sas_dev_attrs
,
8559 .track_queue_depth
= 1,
8562 /* raid transport support for SAS 2.0 HBA devices */
8563 static struct raid_function_template mpt2sas_raid_functions
= {
8564 .cookie
= &mpt2sas_driver_template
,
8565 .is_raid
= scsih_is_raid
,
8566 .get_resync
= scsih_get_resync
,
8567 .get_state
= scsih_get_state
,
8570 /* shost template for SAS 3.0 HBA devices */
8571 static struct scsi_host_template mpt3sas_driver_template
= {
8572 .module
= THIS_MODULE
,
8573 .name
= "Fusion MPT SAS Host",
8574 .proc_name
= MPT3SAS_DRIVER_NAME
,
8575 .queuecommand
= scsih_qcmd
,
8576 .target_alloc
= scsih_target_alloc
,
8577 .slave_alloc
= scsih_slave_alloc
,
8578 .slave_configure
= scsih_slave_configure
,
8579 .target_destroy
= scsih_target_destroy
,
8580 .slave_destroy
= scsih_slave_destroy
,
8581 .scan_finished
= scsih_scan_finished
,
8582 .scan_start
= scsih_scan_start
,
8583 .change_queue_depth
= scsih_change_queue_depth
,
8584 .eh_abort_handler
= scsih_abort
,
8585 .eh_device_reset_handler
= scsih_dev_reset
,
8586 .eh_target_reset_handler
= scsih_target_reset
,
8587 .eh_host_reset_handler
= scsih_host_reset
,
8588 .bios_param
= scsih_bios_param
,
8591 .sg_tablesize
= MPT3SAS_SG_DEPTH
,
8592 .max_sectors
= 32767,
8594 .use_clustering
= ENABLE_CLUSTERING
,
8595 .shost_attrs
= mpt3sas_host_attrs
,
8596 .sdev_attrs
= mpt3sas_dev_attrs
,
8597 .track_queue_depth
= 1,
8600 /* raid transport support for SAS 3.0 HBA devices */
8601 static struct raid_function_template mpt3sas_raid_functions
= {
8602 .cookie
= &mpt3sas_driver_template
,
8603 .is_raid
= scsih_is_raid
,
8604 .get_resync
= scsih_get_resync
,
8605 .get_state
= scsih_get_state
,
8609 * _scsih_determine_hba_mpi_version - determine in which MPI version class
8610 * this device belongs to.
8611 * @pdev: PCI device struct
8613 * return MPI2_VERSION for SAS 2.0 HBA devices,
8614 * MPI25_VERSION for SAS 3.0 HBA devices, and
8615 * MPI26 VERSION for Cutlass & Invader SAS 3.0 HBA devices
8618 _scsih_determine_hba_mpi_version(struct pci_dev
*pdev
)
8621 switch (pdev
->device
) {
8622 case MPI2_MFGPAGE_DEVID_SSS6200
:
8623 case MPI2_MFGPAGE_DEVID_SAS2004
:
8624 case MPI2_MFGPAGE_DEVID_SAS2008
:
8625 case MPI2_MFGPAGE_DEVID_SAS2108_1
:
8626 case MPI2_MFGPAGE_DEVID_SAS2108_2
:
8627 case MPI2_MFGPAGE_DEVID_SAS2108_3
:
8628 case MPI2_MFGPAGE_DEVID_SAS2116_1
:
8629 case MPI2_MFGPAGE_DEVID_SAS2116_2
:
8630 case MPI2_MFGPAGE_DEVID_SAS2208_1
:
8631 case MPI2_MFGPAGE_DEVID_SAS2208_2
:
8632 case MPI2_MFGPAGE_DEVID_SAS2208_3
:
8633 case MPI2_MFGPAGE_DEVID_SAS2208_4
:
8634 case MPI2_MFGPAGE_DEVID_SAS2208_5
:
8635 case MPI2_MFGPAGE_DEVID_SAS2208_6
:
8636 case MPI2_MFGPAGE_DEVID_SAS2308_1
:
8637 case MPI2_MFGPAGE_DEVID_SAS2308_2
:
8638 case MPI2_MFGPAGE_DEVID_SAS2308_3
:
8639 return MPI2_VERSION
;
8640 case MPI25_MFGPAGE_DEVID_SAS3004
:
8641 case MPI25_MFGPAGE_DEVID_SAS3008
:
8642 case MPI25_MFGPAGE_DEVID_SAS3108_1
:
8643 case MPI25_MFGPAGE_DEVID_SAS3108_2
:
8644 case MPI25_MFGPAGE_DEVID_SAS3108_5
:
8645 case MPI25_MFGPAGE_DEVID_SAS3108_6
:
8646 return MPI25_VERSION
;
8647 case MPI26_MFGPAGE_DEVID_SAS3216
:
8648 case MPI26_MFGPAGE_DEVID_SAS3224
:
8649 case MPI26_MFGPAGE_DEVID_SAS3316_1
:
8650 case MPI26_MFGPAGE_DEVID_SAS3316_2
:
8651 case MPI26_MFGPAGE_DEVID_SAS3316_3
:
8652 case MPI26_MFGPAGE_DEVID_SAS3316_4
:
8653 case MPI26_MFGPAGE_DEVID_SAS3324_1
:
8654 case MPI26_MFGPAGE_DEVID_SAS3324_2
:
8655 case MPI26_MFGPAGE_DEVID_SAS3324_3
:
8656 case MPI26_MFGPAGE_DEVID_SAS3324_4
:
8657 return MPI26_VERSION
;
8663 * _scsih_probe - attach and add scsi host
8664 * @pdev: PCI device struct
8665 * @id: pci device id
8667 * Returns 0 success, anything else error.
8670 _scsih_probe(struct pci_dev
*pdev
, const struct pci_device_id
*id
)
8672 struct MPT3SAS_ADAPTER
*ioc
;
8673 struct Scsi_Host
*shost
= NULL
;
8675 u16 hba_mpi_version
;
8677 /* Determine in which MPI version class this pci device belongs */
8678 hba_mpi_version
= _scsih_determine_hba_mpi_version(pdev
);
8679 if (hba_mpi_version
== 0)
8682 /* Enumerate only SAS 2.0 HBA's if hbas_to_enumerate is one,
8683 * for other generation HBA's return with -ENODEV
8685 if ((hbas_to_enumerate
== 1) && (hba_mpi_version
!= MPI2_VERSION
))
8688 /* Enumerate only SAS 3.0 HBA's if hbas_to_enumerate is two,
8689 * for other generation HBA's return with -ENODEV
8691 if ((hbas_to_enumerate
== 2) && (!(hba_mpi_version
== MPI25_VERSION
8692 || hba_mpi_version
== MPI26_VERSION
)))
8695 switch (hba_mpi_version
) {
8697 /* Use mpt2sas driver host template for SAS 2.0 HBA's */
8698 shost
= scsi_host_alloc(&mpt2sas_driver_template
,
8699 sizeof(struct MPT3SAS_ADAPTER
));
8702 ioc
= shost_priv(shost
);
8703 memset(ioc
, 0, sizeof(struct MPT3SAS_ADAPTER
));
8704 ioc
->hba_mpi_version_belonged
= hba_mpi_version
;
8705 ioc
->id
= mpt2_ids
++;
8706 sprintf(ioc
->driver_name
, "%s", MPT2SAS_DRIVER_NAME
);
8707 if (pdev
->device
== MPI2_MFGPAGE_DEVID_SSS6200
) {
8708 ioc
->is_warpdrive
= 1;
8709 ioc
->hide_ir_msg
= 1;
8711 ioc
->mfg_pg10_hide_flag
= MFG_PAGE10_EXPOSE_ALL_DISKS
;
8715 /* Use mpt3sas driver host template for SAS 3.0 HBA's */
8716 shost
= scsi_host_alloc(&mpt3sas_driver_template
,
8717 sizeof(struct MPT3SAS_ADAPTER
));
8720 ioc
= shost_priv(shost
);
8721 memset(ioc
, 0, sizeof(struct MPT3SAS_ADAPTER
));
8722 ioc
->hba_mpi_version_belonged
= hba_mpi_version
;
8723 ioc
->id
= mpt3_ids
++;
8724 sprintf(ioc
->driver_name
, "%s", MPT3SAS_DRIVER_NAME
);
8725 if ((ioc
->hba_mpi_version_belonged
== MPI25_VERSION
&&
8726 pdev
->revision
>= SAS3_PCI_DEVICE_C0_REVISION
) ||
8727 (ioc
->hba_mpi_version_belonged
== MPI26_VERSION
))
8728 ioc
->msix96_vector
= 1;
8734 INIT_LIST_HEAD(&ioc
->list
);
8735 spin_lock(&gioc_lock
);
8736 list_add_tail(&ioc
->list
, &mpt3sas_ioc_list
);
8737 spin_unlock(&gioc_lock
);
8740 ioc
->scsi_io_cb_idx
= scsi_io_cb_idx
;
8741 ioc
->tm_cb_idx
= tm_cb_idx
;
8742 ioc
->ctl_cb_idx
= ctl_cb_idx
;
8743 ioc
->base_cb_idx
= base_cb_idx
;
8744 ioc
->port_enable_cb_idx
= port_enable_cb_idx
;
8745 ioc
->transport_cb_idx
= transport_cb_idx
;
8746 ioc
->scsih_cb_idx
= scsih_cb_idx
;
8747 ioc
->config_cb_idx
= config_cb_idx
;
8748 ioc
->tm_tr_cb_idx
= tm_tr_cb_idx
;
8749 ioc
->tm_tr_volume_cb_idx
= tm_tr_volume_cb_idx
;
8750 ioc
->tm_sas_control_cb_idx
= tm_sas_control_cb_idx
;
8751 ioc
->logging_level
= logging_level
;
8752 ioc
->schedule_dead_ioc_flush_running_cmds
= &_scsih_flush_running_cmds
;
8753 /* misc semaphores and spin locks */
8754 mutex_init(&ioc
->reset_in_progress_mutex
);
8755 /* initializing pci_access_mutex lock */
8756 mutex_init(&ioc
->pci_access_mutex
);
8757 spin_lock_init(&ioc
->ioc_reset_in_progress_lock
);
8758 spin_lock_init(&ioc
->scsi_lookup_lock
);
8759 spin_lock_init(&ioc
->sas_device_lock
);
8760 spin_lock_init(&ioc
->sas_node_lock
);
8761 spin_lock_init(&ioc
->fw_event_lock
);
8762 spin_lock_init(&ioc
->raid_device_lock
);
8763 spin_lock_init(&ioc
->diag_trigger_lock
);
8765 INIT_LIST_HEAD(&ioc
->sas_device_list
);
8766 INIT_LIST_HEAD(&ioc
->sas_device_init_list
);
8767 INIT_LIST_HEAD(&ioc
->sas_expander_list
);
8768 INIT_LIST_HEAD(&ioc
->fw_event_list
);
8769 INIT_LIST_HEAD(&ioc
->raid_device_list
);
8770 INIT_LIST_HEAD(&ioc
->sas_hba
.sas_port_list
);
8771 INIT_LIST_HEAD(&ioc
->delayed_tr_list
);
8772 INIT_LIST_HEAD(&ioc
->delayed_sc_list
);
8773 INIT_LIST_HEAD(&ioc
->delayed_event_ack_list
);
8774 INIT_LIST_HEAD(&ioc
->delayed_tr_volume_list
);
8775 INIT_LIST_HEAD(&ioc
->reply_queue_list
);
8777 sprintf(ioc
->name
, "%s_cm%d", ioc
->driver_name
, ioc
->id
);
8779 /* init shost parameters */
8780 shost
->max_cmd_len
= 32;
8781 shost
->max_lun
= max_lun
;
8782 shost
->transportt
= mpt3sas_transport_template
;
8783 shost
->unique_id
= ioc
->id
;
8785 if (max_sectors
!= 0xFFFF) {
8786 if (max_sectors
< 64) {
8787 shost
->max_sectors
= 64;
8788 pr_warn(MPT3SAS_FMT
"Invalid value %d passed " \
8789 "for max_sectors, range is 64 to 32767. Assigning "
8790 "value of 64.\n", ioc
->name
, max_sectors
);
8791 } else if (max_sectors
> 32767) {
8792 shost
->max_sectors
= 32767;
8793 pr_warn(MPT3SAS_FMT
"Invalid value %d passed " \
8794 "for max_sectors, range is 64 to 32767. Assigning "
8795 "default value of 32767.\n", ioc
->name
,
8798 shost
->max_sectors
= max_sectors
& 0xFFFE;
8800 "The max_sectors value is set to %d\n",
8801 ioc
->name
, shost
->max_sectors
);
8805 /* register EEDP capabilities with SCSI layer */
8807 scsi_host_set_prot(shost
, prot_mask
);
8809 scsi_host_set_prot(shost
, SHOST_DIF_TYPE1_PROTECTION
8810 | SHOST_DIF_TYPE2_PROTECTION
8811 | SHOST_DIF_TYPE3_PROTECTION
);
8813 scsi_host_set_guard(shost
, SHOST_DIX_GUARD_CRC
);
8816 snprintf(ioc
->firmware_event_name
, sizeof(ioc
->firmware_event_name
),
8817 "fw_event_%s%d", ioc
->driver_name
, ioc
->id
);
8818 ioc
->firmware_event_thread
= alloc_ordered_workqueue(
8819 ioc
->firmware_event_name
, WQ_MEM_RECLAIM
);
8820 if (!ioc
->firmware_event_thread
) {
8821 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
8822 ioc
->name
, __FILE__
, __LINE__
, __func__
);
8824 goto out_thread_fail
;
8827 ioc
->is_driver_loading
= 1;
8828 if ((mpt3sas_base_attach(ioc
))) {
8829 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
8830 ioc
->name
, __FILE__
, __LINE__
, __func__
);
8832 goto out_attach_fail
;
8835 if (ioc
->is_warpdrive
) {
8836 if (ioc
->mfg_pg10_hide_flag
== MFG_PAGE10_EXPOSE_ALL_DISKS
)
8837 ioc
->hide_drives
= 0;
8838 else if (ioc
->mfg_pg10_hide_flag
== MFG_PAGE10_HIDE_ALL_DISKS
)
8839 ioc
->hide_drives
= 1;
8841 if (mpt3sas_get_num_volumes(ioc
))
8842 ioc
->hide_drives
= 1;
8844 ioc
->hide_drives
= 0;
8847 ioc
->hide_drives
= 0;
8849 rv
= scsi_add_host(shost
, &pdev
->dev
);
8851 pr_err(MPT3SAS_FMT
"failure at %s:%d/%s()!\n",
8852 ioc
->name
, __FILE__
, __LINE__
, __func__
);
8853 goto out_add_shost_fail
;
8856 scsi_scan_host(shost
);
8859 mpt3sas_base_detach(ioc
);
8861 destroy_workqueue(ioc
->firmware_event_thread
);
8863 spin_lock(&gioc_lock
);
8864 list_del(&ioc
->list
);
8865 spin_unlock(&gioc_lock
);
8866 scsi_host_put(shost
);
8872 * scsih_suspend - power management suspend main entry point
8873 * @pdev: PCI device struct
8874 * @state: PM state change to (usually PCI_D3)
8876 * Returns 0 success, anything else error.
8879 scsih_suspend(struct pci_dev
*pdev
, pm_message_t state
)
8881 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8882 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
8883 pci_power_t device_state
;
8885 mpt3sas_base_stop_watchdog(ioc
);
8886 flush_scheduled_work();
8887 scsi_block_requests(shost
);
8888 device_state
= pci_choose_state(pdev
, state
);
8890 "pdev=0x%p, slot=%s, entering operating state [D%d]\n",
8891 ioc
->name
, pdev
, pci_name(pdev
), device_state
);
8893 pci_save_state(pdev
);
8894 mpt3sas_base_free_resources(ioc
);
8895 pci_set_power_state(pdev
, device_state
);
8900 * scsih_resume - power management resume main entry point
8901 * @pdev: PCI device struct
8903 * Returns 0 success, anything else error.
8906 scsih_resume(struct pci_dev
*pdev
)
8908 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8909 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
8910 pci_power_t device_state
= pdev
->current_state
;
8914 "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
8915 ioc
->name
, pdev
, pci_name(pdev
), device_state
);
8917 pci_set_power_state(pdev
, PCI_D0
);
8918 pci_enable_wake(pdev
, PCI_D0
, 0);
8919 pci_restore_state(pdev
);
8921 r
= mpt3sas_base_map_resources(ioc
);
8925 mpt3sas_base_hard_reset_handler(ioc
, SOFT_RESET
);
8926 scsi_unblock_requests(shost
);
8927 mpt3sas_base_start_watchdog(ioc
);
8930 #endif /* CONFIG_PM */
8933 * scsih_pci_error_detected - Called when a PCI error is detected.
8934 * @pdev: PCI device struct
8935 * @state: PCI channel state
8937 * Description: Called when a PCI error is detected.
8940 * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
8942 static pci_ers_result_t
8943 scsih_pci_error_detected(struct pci_dev
*pdev
, pci_channel_state_t state
)
8945 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8946 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
8948 pr_info(MPT3SAS_FMT
"PCI error: detected callback, state(%d)!!\n",
8952 case pci_channel_io_normal
:
8953 return PCI_ERS_RESULT_CAN_RECOVER
;
8954 case pci_channel_io_frozen
:
8955 /* Fatal error, prepare for slot reset */
8956 ioc
->pci_error_recovery
= 1;
8957 scsi_block_requests(ioc
->shost
);
8958 mpt3sas_base_stop_watchdog(ioc
);
8959 mpt3sas_base_free_resources(ioc
);
8960 return PCI_ERS_RESULT_NEED_RESET
;
8961 case pci_channel_io_perm_failure
:
8962 /* Permanent error, prepare for device removal */
8963 ioc
->pci_error_recovery
= 1;
8964 mpt3sas_base_stop_watchdog(ioc
);
8965 _scsih_flush_running_cmds(ioc
);
8966 return PCI_ERS_RESULT_DISCONNECT
;
8968 return PCI_ERS_RESULT_NEED_RESET
;
8972 * scsih_pci_slot_reset - Called when PCI slot has been reset.
8973 * @pdev: PCI device struct
8975 * Description: This routine is called by the pci error recovery
8976 * code after the PCI slot has been reset, just before we
8977 * should resume normal operations.
8979 static pci_ers_result_t
8980 scsih_pci_slot_reset(struct pci_dev
*pdev
)
8982 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
8983 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
8986 pr_info(MPT3SAS_FMT
"PCI error: slot reset callback!!\n",
8989 ioc
->pci_error_recovery
= 0;
8991 pci_restore_state(pdev
);
8992 rc
= mpt3sas_base_map_resources(ioc
);
8994 return PCI_ERS_RESULT_DISCONNECT
;
8996 rc
= mpt3sas_base_hard_reset_handler(ioc
, FORCE_BIG_HAMMER
);
8998 pr_warn(MPT3SAS_FMT
"hard reset: %s\n", ioc
->name
,
8999 (rc
== 0) ? "success" : "failed");
9002 return PCI_ERS_RESULT_RECOVERED
;
9004 return PCI_ERS_RESULT_DISCONNECT
;
9008 * scsih_pci_resume() - resume normal ops after PCI reset
9009 * @pdev: pointer to PCI device
9011 * Called when the error recovery driver tells us that its
9012 * OK to resume normal operation. Use completion to allow
9013 * halted scsi ops to resume.
9016 scsih_pci_resume(struct pci_dev
*pdev
)
9018 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9019 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
9021 pr_info(MPT3SAS_FMT
"PCI error: resume callback!!\n", ioc
->name
);
9023 pci_cleanup_aer_uncorrect_error_status(pdev
);
9024 mpt3sas_base_start_watchdog(ioc
);
9025 scsi_unblock_requests(ioc
->shost
);
9029 * scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
9030 * @pdev: pointer to PCI device
9032 static pci_ers_result_t
9033 scsih_pci_mmio_enabled(struct pci_dev
*pdev
)
9035 struct Scsi_Host
*shost
= pci_get_drvdata(pdev
);
9036 struct MPT3SAS_ADAPTER
*ioc
= shost_priv(shost
);
9038 pr_info(MPT3SAS_FMT
"PCI error: mmio enabled callback!!\n",
9041 /* TODO - dump whatever for debugging purposes */
9043 /* This called only if scsih_pci_error_detected returns
9044 * PCI_ERS_RESULT_CAN_RECOVER. Read/write to the device still
9045 * works, no need to reset slot.
9047 return PCI_ERS_RESULT_RECOVERED
;
9051 * The pci device ids are defined in mpi/mpi2_cnfg.h.
9053 static const struct pci_device_id mpt3sas_pci_table
[] = {
9054 /* Spitfire ~ 2004 */
9055 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2004
,
9056 PCI_ANY_ID
, PCI_ANY_ID
},
9058 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2008
,
9059 PCI_ANY_ID
, PCI_ANY_ID
},
9060 /* Liberator ~ 2108 */
9061 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2108_1
,
9062 PCI_ANY_ID
, PCI_ANY_ID
},
9063 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2108_2
,
9064 PCI_ANY_ID
, PCI_ANY_ID
},
9065 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2108_3
,
9066 PCI_ANY_ID
, PCI_ANY_ID
},
9068 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2116_1
,
9069 PCI_ANY_ID
, PCI_ANY_ID
},
9070 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2116_2
,
9071 PCI_ANY_ID
, PCI_ANY_ID
},
9072 /* Thunderbolt ~ 2208 */
9073 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2208_1
,
9074 PCI_ANY_ID
, PCI_ANY_ID
},
9075 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2208_2
,
9076 PCI_ANY_ID
, PCI_ANY_ID
},
9077 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2208_3
,
9078 PCI_ANY_ID
, PCI_ANY_ID
},
9079 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2208_4
,
9080 PCI_ANY_ID
, PCI_ANY_ID
},
9081 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2208_5
,
9082 PCI_ANY_ID
, PCI_ANY_ID
},
9083 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2208_6
,
9084 PCI_ANY_ID
, PCI_ANY_ID
},
9085 /* Mustang ~ 2308 */
9086 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2308_1
,
9087 PCI_ANY_ID
, PCI_ANY_ID
},
9088 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2308_2
,
9089 PCI_ANY_ID
, PCI_ANY_ID
},
9090 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SAS2308_3
,
9091 PCI_ANY_ID
, PCI_ANY_ID
},
9093 { MPI2_MFGPAGE_VENDORID_LSI
, MPI2_MFGPAGE_DEVID_SSS6200
,
9094 PCI_ANY_ID
, PCI_ANY_ID
},
9095 /* Fury ~ 3004 and 3008 */
9096 { MPI2_MFGPAGE_VENDORID_LSI
, MPI25_MFGPAGE_DEVID_SAS3004
,
9097 PCI_ANY_ID
, PCI_ANY_ID
},
9098 { MPI2_MFGPAGE_VENDORID_LSI
, MPI25_MFGPAGE_DEVID_SAS3008
,
9099 PCI_ANY_ID
, PCI_ANY_ID
},
9100 /* Invader ~ 3108 */
9101 { MPI2_MFGPAGE_VENDORID_LSI
, MPI25_MFGPAGE_DEVID_SAS3108_1
,
9102 PCI_ANY_ID
, PCI_ANY_ID
},
9103 { MPI2_MFGPAGE_VENDORID_LSI
, MPI25_MFGPAGE_DEVID_SAS3108_2
,
9104 PCI_ANY_ID
, PCI_ANY_ID
},
9105 { MPI2_MFGPAGE_VENDORID_LSI
, MPI25_MFGPAGE_DEVID_SAS3108_5
,
9106 PCI_ANY_ID
, PCI_ANY_ID
},
9107 { MPI2_MFGPAGE_VENDORID_LSI
, MPI25_MFGPAGE_DEVID_SAS3108_6
,
9108 PCI_ANY_ID
, PCI_ANY_ID
},
9109 /* Cutlass ~ 3216 and 3224 */
9110 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3216
,
9111 PCI_ANY_ID
, PCI_ANY_ID
},
9112 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3224
,
9113 PCI_ANY_ID
, PCI_ANY_ID
},
9114 /* Intruder ~ 3316 and 3324 */
9115 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3316_1
,
9116 PCI_ANY_ID
, PCI_ANY_ID
},
9117 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3316_2
,
9118 PCI_ANY_ID
, PCI_ANY_ID
},
9119 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3316_3
,
9120 PCI_ANY_ID
, PCI_ANY_ID
},
9121 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3316_4
,
9122 PCI_ANY_ID
, PCI_ANY_ID
},
9123 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3324_1
,
9124 PCI_ANY_ID
, PCI_ANY_ID
},
9125 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3324_2
,
9126 PCI_ANY_ID
, PCI_ANY_ID
},
9127 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3324_3
,
9128 PCI_ANY_ID
, PCI_ANY_ID
},
9129 { MPI2_MFGPAGE_VENDORID_LSI
, MPI26_MFGPAGE_DEVID_SAS3324_4
,
9130 PCI_ANY_ID
, PCI_ANY_ID
},
9131 {0} /* Terminating entry */
9133 MODULE_DEVICE_TABLE(pci
, mpt3sas_pci_table
);
9135 static struct pci_error_handlers _mpt3sas_err_handler
= {
9136 .error_detected
= scsih_pci_error_detected
,
9137 .mmio_enabled
= scsih_pci_mmio_enabled
,
9138 .slot_reset
= scsih_pci_slot_reset
,
9139 .resume
= scsih_pci_resume
,
9142 static struct pci_driver mpt3sas_driver
= {
9143 .name
= MPT3SAS_DRIVER_NAME
,
9144 .id_table
= mpt3sas_pci_table
,
9145 .probe
= _scsih_probe
,
9146 .remove
= scsih_remove
,
9147 .shutdown
= scsih_shutdown
,
9148 .err_handler
= &_mpt3sas_err_handler
,
9150 .suspend
= scsih_suspend
,
9151 .resume
= scsih_resume
,
9156 * scsih_init - main entry point for this driver.
9158 * Returns 0 success, anything else error.
9166 mpt3sas_base_initialize_callback_handler();
9168 /* queuecommand callback hander */
9169 scsi_io_cb_idx
= mpt3sas_base_register_callback_handler(_scsih_io_done
);
9171 /* task managment callback handler */
9172 tm_cb_idx
= mpt3sas_base_register_callback_handler(_scsih_tm_done
);
9174 /* base internal commands callback handler */
9175 base_cb_idx
= mpt3sas_base_register_callback_handler(mpt3sas_base_done
);
9176 port_enable_cb_idx
= mpt3sas_base_register_callback_handler(
9177 mpt3sas_port_enable_done
);
9179 /* transport internal commands callback handler */
9180 transport_cb_idx
= mpt3sas_base_register_callback_handler(
9181 mpt3sas_transport_done
);
9183 /* scsih internal commands callback handler */
9184 scsih_cb_idx
= mpt3sas_base_register_callback_handler(_scsih_done
);
9186 /* configuration page API internal commands callback handler */
9187 config_cb_idx
= mpt3sas_base_register_callback_handler(
9188 mpt3sas_config_done
);
9190 /* ctl module callback handler */
9191 ctl_cb_idx
= mpt3sas_base_register_callback_handler(mpt3sas_ctl_done
);
9193 tm_tr_cb_idx
= mpt3sas_base_register_callback_handler(
9194 _scsih_tm_tr_complete
);
9196 tm_tr_volume_cb_idx
= mpt3sas_base_register_callback_handler(
9197 _scsih_tm_volume_tr_complete
);
9199 tm_sas_control_cb_idx
= mpt3sas_base_register_callback_handler(
9200 _scsih_sas_control_complete
);
9206 * scsih_exit - exit point for this driver (when it is a module).
9208 * Returns 0 success, anything else error.
9214 mpt3sas_base_release_callback_handler(scsi_io_cb_idx
);
9215 mpt3sas_base_release_callback_handler(tm_cb_idx
);
9216 mpt3sas_base_release_callback_handler(base_cb_idx
);
9217 mpt3sas_base_release_callback_handler(port_enable_cb_idx
);
9218 mpt3sas_base_release_callback_handler(transport_cb_idx
);
9219 mpt3sas_base_release_callback_handler(scsih_cb_idx
);
9220 mpt3sas_base_release_callback_handler(config_cb_idx
);
9221 mpt3sas_base_release_callback_handler(ctl_cb_idx
);
9223 mpt3sas_base_release_callback_handler(tm_tr_cb_idx
);
9224 mpt3sas_base_release_callback_handler(tm_tr_volume_cb_idx
);
9225 mpt3sas_base_release_callback_handler(tm_sas_control_cb_idx
);
9227 /* raid transport support */
9228 if (hbas_to_enumerate
!= 1)
9229 raid_class_release(mpt3sas_raid_template
);
9230 if (hbas_to_enumerate
!= 2)
9231 raid_class_release(mpt2sas_raid_template
);
9232 sas_release_transport(mpt3sas_transport_template
);
9236 * _mpt3sas_init - main entry point for this driver.
9238 * Returns 0 success, anything else error.
9245 pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME
,
9246 MPT3SAS_DRIVER_VERSION
);
9248 mpt3sas_transport_template
=
9249 sas_attach_transport(&mpt3sas_transport_functions
);
9250 if (!mpt3sas_transport_template
)
9253 /* No need attach mpt3sas raid functions template
9254 * if hbas_to_enumarate value is one.
9256 if (hbas_to_enumerate
!= 1) {
9257 mpt3sas_raid_template
=
9258 raid_class_attach(&mpt3sas_raid_functions
);
9259 if (!mpt3sas_raid_template
) {
9260 sas_release_transport(mpt3sas_transport_template
);
9265 /* No need to attach mpt2sas raid functions template
9266 * if hbas_to_enumarate value is two
9268 if (hbas_to_enumerate
!= 2) {
9269 mpt2sas_raid_template
=
9270 raid_class_attach(&mpt2sas_raid_functions
);
9271 if (!mpt2sas_raid_template
) {
9272 sas_release_transport(mpt3sas_transport_template
);
9277 error
= scsih_init();
9283 mpt3sas_ctl_init(hbas_to_enumerate
);
9285 error
= pci_register_driver(&mpt3sas_driver
);
9293 * _mpt3sas_exit - exit point for this driver (when it is a module).
9299 pr_info("mpt3sas version %s unloading\n",
9300 MPT3SAS_DRIVER_VERSION
);
9302 pci_unregister_driver(&mpt3sas_driver
);
9304 mpt3sas_ctl_exit(hbas_to_enumerate
);
9309 module_init(_mpt3sas_init
);
9310 module_exit(_mpt3sas_exit
);