drivers/scsi/qla2xxx/qla_sup.c

   1 /******************************************************************************
   2  *                  QLOGIC LINUX SOFTWARE
   3  *
   4  * QLogic ISP2x00 device driver for Linux 2.6.x
   5  * Copyright (C) 2003-2005 QLogic Corporation
   6  * (www.qlogic.com)
   7  *
   8  * This program is free software; you can redistribute it and/or modify it
   9  * under the terms of the GNU General Public License as published by the
  10  * Free Software Foundation; either version 2, or (at your option) any
  11  * later version.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16  * General Public License for more details.
  17  *
  18  ******************************************************************************/
  19
  20 #include "qla_def.h"
  21
  22 #include <linux/delay.h>
  23 #include <asm/uaccess.h>
  24
  25 static uint16_t qla2x00_nvram_request(scsi_qla_host_t *, uint32_t);
  26 static void qla2x00_nv_deselect(scsi_qla_host_t *);
  27 static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t);
  28
  29 /*
  30  * NVRAM support routines
  31  */
  32
  33 /**
  34  * qla2x00_lock_nvram_access() -
  35  * @ha: HA context
  36  */
  37 void
  38 qla2x00_lock_nvram_access(scsi_qla_host_t *ha)
  39 {
  40         uint16_t data;
  41         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
  42
  43         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
  44                 data = RD_REG_WORD(&reg->nvram);
  45                 while (data & NVR_BUSY) {
  46                         udelay(100);
  47                         data = RD_REG_WORD(&reg->nvram);
  48                 }
  49
  50                 /* Lock resource */
  51                 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
  52                 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  53                 udelay(5);
  54                 data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  55                 while ((data & BIT_0) == 0) {
  56                         /* Lock failed */
  57                         udelay(100);
  58                         WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
  59                         RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  60                         udelay(5);
  61                         data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  62                 }
  63         }
  64 }
  65
  66 /**
  67  * qla2x00_unlock_nvram_access() -
  68  * @ha: HA context
  69  */
  70 void
  71 qla2x00_unlock_nvram_access(scsi_qla_host_t *ha)
  72 {
  73         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
  74
  75         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
  76                 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0);
  77                 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  78         }
  79 }
  80
  81 /**
  82  * qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
  83  *      request routine to get the word from NVRAM.
  84  * @ha: HA context
  85  * @addr: Address in NVRAM to read
  86  *
  87  * Returns the word read from nvram @addr.
  88  */
  89 uint16_t
  90 qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr)
  91 {
  92         uint16_t        data;
  93         uint32_t        nv_cmd;
  94
  95         nv_cmd = addr << 16;
  96         nv_cmd |= NV_READ_OP;
  97         data = qla2x00_nvram_request(ha, nv_cmd);
  98
  99         return (data);
 100 }
 101
 102 /**
 103  * qla2x00_write_nvram_word() - Write NVRAM data.
 104  * @ha: HA context
 105  * @addr: Address in NVRAM to write
 106  * @data: word to program
 107  */
 108 void
 109 qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
 110 {
 111         int count;
 112         uint16_t word;
 113         uint32_t nv_cmd;
 114         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 115
 116         qla2x00_nv_write(ha, NVR_DATA_OUT);
 117         qla2x00_nv_write(ha, 0);
 118         qla2x00_nv_write(ha, 0);
 119
 120         for (word = 0; word < 8; word++)
 121                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 122
 123         qla2x00_nv_deselect(ha);
 124
 125         /* Write data */
 126         nv_cmd = (addr << 16) | NV_WRITE_OP;
 127         nv_cmd |= data;
 128         nv_cmd <<= 5;
 129         for (count = 0; count < 27; count++) {
 130                 if (nv_cmd & BIT_31)
 131                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 132                 else
 133                         qla2x00_nv_write(ha, 0);
 134
 135                 nv_cmd <<= 1;
 136         }
 137
 138         qla2x00_nv_deselect(ha);
 139
 140         /* Wait for NVRAM to become ready */
 141         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 142         do {
 143                 NVRAM_DELAY();
 144                 word = RD_REG_WORD(&reg->nvram);
 145         } while ((word & NVR_DATA_IN) == 0);
 146
 147         qla2x00_nv_deselect(ha);
 148
 149         /* Disable writes */
 150         qla2x00_nv_write(ha, NVR_DATA_OUT);
 151         for (count = 0; count < 10; count++)
 152                 qla2x00_nv_write(ha, 0);
 153
 154         qla2x00_nv_deselect(ha);
 155 }
 156
 157 static int
 158 qla2x00_write_nvram_word_tmo(scsi_qla_host_t *ha, uint32_t addr, uint16_t data,
 159     uint32_t tmo)
 160 {
 161         int ret, count;
 162         uint16_t word;
 163         uint32_t nv_cmd;
 164         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 165
 166         ret = QLA_SUCCESS;
 167
 168         qla2x00_nv_write(ha, NVR_DATA_OUT);
 169         qla2x00_nv_write(ha, 0);
 170         qla2x00_nv_write(ha, 0);
 171
 172         for (word = 0; word < 8; word++)
 173                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 174
 175         qla2x00_nv_deselect(ha);
 176
 177         /* Write data */
 178         nv_cmd = (addr << 16) | NV_WRITE_OP;
 179         nv_cmd |= data;
 180         nv_cmd <<= 5;
 181         for (count = 0; count < 27; count++) {
 182                 if (nv_cmd & BIT_31)
 183                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 184                 else
 185                         qla2x00_nv_write(ha, 0);
 186
 187                 nv_cmd <<= 1;
 188         }
 189
 190         qla2x00_nv_deselect(ha);
 191
 192         /* Wait for NVRAM to become ready */
 193         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 194         do {
 195                 NVRAM_DELAY();
 196                 word = RD_REG_WORD(&reg->nvram);
 197                 if (!--tmo) {
 198                         ret = QLA_FUNCTION_FAILED;
 199                         break;
 200                 }
 201         } while ((word & NVR_DATA_IN) == 0);
 202
 203         qla2x00_nv_deselect(ha);
 204
 205         /* Disable writes */
 206         qla2x00_nv_write(ha, NVR_DATA_OUT);
 207         for (count = 0; count < 10; count++)
 208                 qla2x00_nv_write(ha, 0);
 209
 210         qla2x00_nv_deselect(ha);
 211
 212         return ret;
 213 }
 214
 215 /**
 216  * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
 217  *      NVRAM.
 218  * @ha: HA context
 219  * @nv_cmd: NVRAM command
 220  *
 221  * Bit definitions for NVRAM command:
 222  *
 223  *      Bit 26     = start bit
 224  *      Bit 25, 24 = opcode
 225  *      Bit 23-16  = address
 226  *      Bit 15-0   = write data
 227  *
 228  * Returns the word read from nvram @addr.
 229  */
 230 static uint16_t
 231 qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd)
 232 {
 233         uint8_t         cnt;
 234         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 235         uint16_t        data = 0;
 236         uint16_t        reg_data;
 237
 238         /* Send command to NVRAM. */
 239         nv_cmd <<= 5;
 240         for (cnt = 0; cnt < 11; cnt++) {
 241                 if (nv_cmd & BIT_31)
 242                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 243                 else
 244                         qla2x00_nv_write(ha, 0);
 245                 nv_cmd <<= 1;
 246         }
 247
 248         /* Read data from NVRAM. */
 249         for (cnt = 0; cnt < 16; cnt++) {
 250                 WRT_REG_WORD(&reg->nvram, NVR_SELECT | NVR_CLOCK);
 251                 NVRAM_DELAY();
 252                 data <<= 1;
 253                 reg_data = RD_REG_WORD(&reg->nvram);
 254                 if (reg_data & NVR_DATA_IN)
 255                         data |= BIT_0;
 256                 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 257                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 258                 NVRAM_DELAY();
 259         }
 260
 261         /* Deselect chip. */
 262         WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 263         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 264         NVRAM_DELAY();
 265
 266         return (data);
 267 }
 268
 269 /**
 270  * qla2x00_nv_write() - Clean NVRAM operations.
 271  * @ha: HA context
 272  */
 273 static void
 274 qla2x00_nv_deselect(scsi_qla_host_t *ha)
 275 {
 276         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 277
 278         WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 279         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 280         NVRAM_DELAY();
 281 }
 282
 283 /**
 284  * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
 285  * @ha: HA context
 286  * @data: Serial interface selector
 287  */
 288 static void
 289 qla2x00_nv_write(scsi_qla_host_t *ha, uint16_t data)
 290 {
 291         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 292
 293         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 294         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 295         NVRAM_DELAY();
 296         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT| NVR_CLOCK |
 297             NVR_WRT_ENABLE);
 298         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 299         NVRAM_DELAY();
 300         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 301         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 302         NVRAM_DELAY();
 303 }
 304
 305 /**
 306  * qla2x00_clear_nvram_protection() -
 307  * @ha: HA context
 308  */
 309 static int
 310 qla2x00_clear_nvram_protection(scsi_qla_host_t *ha)
 311 {
 312         int ret, stat;
 313         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 314         uint32_t word;
 315         uint16_t wprot, wprot_old;
 316
 317         /* Clear NVRAM write protection. */
 318         ret = QLA_FUNCTION_FAILED;
 319         wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, 0));
 320         stat = qla2x00_write_nvram_word_tmo(ha, 0,
 321             __constant_cpu_to_le16(0x1234), 100000);
 322         wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, 0));
 323         if (stat != QLA_SUCCESS || wprot != __constant_cpu_to_le16(0x1234)) {
 324                 /* Write enable. */
 325                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 326                 qla2x00_nv_write(ha, 0);
 327                 qla2x00_nv_write(ha, 0);
 328                 for (word = 0; word < 8; word++)
 329                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 330
 331                 qla2x00_nv_deselect(ha);
 332
 333                 /* Enable protection register. */
 334                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 335                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 336                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 337                 for (word = 0; word < 8; word++)
 338                         qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 339
 340                 qla2x00_nv_deselect(ha);
 341
 342                 /* Clear protection register (ffff is cleared). */
 343                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 344                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 345                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 346                 for (word = 0; word < 8; word++)
 347                         qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 348
 349                 qla2x00_nv_deselect(ha);
 350
 351                 /* Wait for NVRAM to become ready. */
 352                 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 353                 do {
 354                         NVRAM_DELAY();
 355                         word = RD_REG_WORD(&reg->nvram);
 356                 } while ((word & NVR_DATA_IN) == 0);
 357
 358                 ret = QLA_SUCCESS;
 359         } else
 360                 qla2x00_write_nvram_word(ha, 0, wprot_old);
 361
 362         return ret;
 363 }
 364
 365 static void
 366 qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
 367 {
 368         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 369         uint32_t word;
 370
 371         if (stat != QLA_SUCCESS)
 372                 return;
 373
 374         /* Set NVRAM write protection. */
 375         /* Write enable. */
 376         qla2x00_nv_write(ha, NVR_DATA_OUT);
 377         qla2x00_nv_write(ha, 0);
 378         qla2x00_nv_write(ha, 0);
 379         for (word = 0; word < 8; word++)
 380                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 381
 382         qla2x00_nv_deselect(ha);
 383
 384         /* Enable protection register. */
 385         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 386         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 387         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 388         for (word = 0; word < 8; word++)
 389                 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 390
 391         qla2x00_nv_deselect(ha);
 392
 393         /* Enable protection register. */
 394         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 395         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 396         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 397         for (word = 0; word < 8; word++)
 398                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 399
 400         qla2x00_nv_deselect(ha);
 401
 402         /* Wait for NVRAM to become ready. */
 403         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 404         do {
 405                 NVRAM_DELAY();
 406                 word = RD_REG_WORD(&reg->nvram);
 407         } while ((word & NVR_DATA_IN) == 0);
 408 }
 409
 410
 411 /*****************************************************************************/
 412 /* Flash Manipulation Routines                                               */
 413 /*****************************************************************************/
 414
 415 static inline uint32_t
 416 flash_conf_to_access_addr(uint32_t faddr)
 417 {
 418         return FARX_ACCESS_FLASH_CONF | faddr;
 419 }
 420
 421 static inline uint32_t
 422 flash_data_to_access_addr(uint32_t faddr)
 423 {
 424         return FARX_ACCESS_FLASH_DATA | faddr;
 425 }
 426
 427 static inline uint32_t
 428 nvram_conf_to_access_addr(uint32_t naddr)
 429 {
 430         return FARX_ACCESS_NVRAM_CONF | naddr;
 431 }
 432
 433 static inline uint32_t
 434 nvram_data_to_access_addr(uint32_t naddr)
 435 {
 436         return FARX_ACCESS_NVRAM_DATA | naddr;
 437 }
 438
 439 uint32_t
 440 qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
 441 {
 442         int rval;
 443         uint32_t cnt, data;
 444         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 445
 446         WRT_REG_DWORD(&reg->flash_addr, addr & ~FARX_DATA_FLAG);
 447         /* Wait for READ cycle to complete. */
 448         rval = QLA_SUCCESS;
 449         for (cnt = 3000;
 450             (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) == 0 &&
 451             rval == QLA_SUCCESS; cnt--) {
 452                 if (cnt)
 453                         udelay(10);
 454                 else
 455                         rval = QLA_FUNCTION_TIMEOUT;
 456         }
 457
 458         /* TODO: What happens if we time out? */
 459         data = 0xDEADDEAD;
 460         if (rval == QLA_SUCCESS)
 461                 data = RD_REG_DWORD(&reg->flash_data);
 462
 463         return data;
 464 }
 465
 466 uint32_t *
 467 qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 468     uint32_t dwords)
 469 {
 470         uint32_t i;
 471         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 472
 473         /* Pause RISC. */
 474         WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
 475         RD_REG_DWORD(&reg->hccr);               /* PCI Posting. */
 476
 477         /* Dword reads to flash. */
 478         for (i = 0; i < dwords; i++, faddr++)
 479                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 480                     flash_data_to_access_addr(faddr)));
 481
 482         /* Release RISC pause. */
 483         WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
 484         RD_REG_DWORD(&reg->hccr);               /* PCI Posting. */
 485
 486         return dwptr;
 487 }
 488
 489 int
 490 qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
 491 {
 492         int rval;
 493         uint32_t cnt;
 494         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 495
 496         WRT_REG_DWORD(&reg->flash_data, data);
 497         RD_REG_DWORD(&reg->flash_data);         /* PCI Posting. */
 498         WRT_REG_DWORD(&reg->flash_addr, addr | FARX_DATA_FLAG);
 499         /* Wait for Write cycle to complete. */
 500         rval = QLA_SUCCESS;
 501         for (cnt = 500000; (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) &&
 502             rval == QLA_SUCCESS; cnt--) {
 503                 if (cnt)
 504                         udelay(10);
 505                 else
 506                         rval = QLA_FUNCTION_TIMEOUT;
 507         }
 508         return rval;
 509 }
 510
 511 void
 512 qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
 513     uint8_t *flash_id)
 514 {
 515         uint32_t ids;
 516
 517         ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(0xd03ab));
 518         *man_id = LSB(ids);
 519         *flash_id = MSB(ids);
 520 }
 521
 522 int
 523 qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 524     uint32_t dwords)
 525 {
 526         int ret;
 527         uint32_t liter;
 528         uint32_t sec_mask, rest_addr, conf_addr;
 529         uint32_t fdata;
 530         uint8_t man_id, flash_id;
 531         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 532
 533         ret = QLA_SUCCESS;
 534
 535         /* Pause RISC. */
 536         WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
 537         RD_REG_DWORD(&reg->hccr);               /* PCI Posting. */
 538
 539         qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
 540         DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
 541             ha->host_no, man_id, flash_id));
 542
 543         conf_addr = flash_conf_to_access_addr(0x03d8);
 544         switch (man_id) {
 545         case 0xbf: /* STT flash. */
 546                 rest_addr = 0x1fff;
 547                 sec_mask = 0x3e000;
 548                 if (flash_id == 0x80)
 549                         conf_addr = flash_conf_to_access_addr(0x0352);
 550                 break;
 551         case 0x13: /* ST M25P80. */
 552                 rest_addr = 0x3fff;
 553                 sec_mask = 0x3c000;
 554                 break;
 555         default:
 556                 /* Default to 64 kb sector size. */
 557                 rest_addr = 0x3fff;
 558                 sec_mask = 0x3c000;
 559                 break;
 560         }
 561
 562         /* Enable flash write. */
 563         WRT_REG_DWORD(&reg->ctrl_status,
 564             RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 565         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 566
 567         /* Disable flash write-protection. */
 568         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
 569
 570         do {    /* Loop once to provide quick error exit. */
 571                 for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
 572                         /* Are we at the beginning of a sector? */
 573                         if ((faddr & rest_addr) == 0) {
 574                                 fdata = (faddr & sec_mask) << 2;
 575                                 ret = qla24xx_write_flash_dword(ha, conf_addr,
 576                                     (fdata & 0xff00) |((fdata << 16) &
 577                                     0xff0000) | ((fdata >> 16) & 0xff));
 578                                 if (ret != QLA_SUCCESS) {
 579                                         DEBUG9(printk("%s(%ld) Unable to flash "
 580                                             "sector: address=%x.\n", __func__,
 581                                             ha->host_no, faddr));
 582                                         break;
 583                                 }
 584                         }
 585                         ret = qla24xx_write_flash_dword(ha,
 586                             flash_data_to_access_addr(faddr),
 587                             cpu_to_le32(*dwptr));
 588                         if (ret != QLA_SUCCESS) {
 589                                 DEBUG9(printk("%s(%ld) Unable to program flash "
 590                                     "address=%x data=%x.\n", __func__,
 591                                     ha->host_no, faddr, *dwptr));
 592                                 break;
 593                         }
 594                 }
 595         } while (0);
 596
 597         /* Disable flash write. */
 598         WRT_REG_DWORD(&reg->ctrl_status,
 599             RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 600         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 601
 602         /* Release RISC pause. */
 603         WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
 604         RD_REG_DWORD(&reg->hccr);               /* PCI Posting. */
 605
 606         return ret;
 607 }
 608
 609 uint8_t *
 610 qla2x00_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 611     uint32_t bytes)
 612 {
 613         uint32_t i;
 614         uint16_t *wptr;
 615
 616         /* Word reads to NVRAM via registers. */
 617         wptr = (uint16_t *)buf;
 618         qla2x00_lock_nvram_access(ha);
 619         for (i = 0; i < bytes >> 1; i++, naddr++)
 620                 wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
 621                     naddr));
 622         qla2x00_unlock_nvram_access(ha);
 623
 624         return buf;
 625 }
 626
 627 uint8_t *
 628 qla24xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 629     uint32_t bytes)
 630 {
 631         uint32_t i;
 632         uint32_t *dwptr;
 633         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 634
 635         /* Pause RISC. */
 636         WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
 637         RD_REG_DWORD(&reg->hccr);       /* PCI Posting. */
 638
 639         /* Dword reads to flash. */
 640         dwptr = (uint32_t *)buf;
 641         for (i = 0; i < bytes >> 2; i++, naddr++)
 642                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 643                     nvram_data_to_access_addr(naddr)));
 644
 645         /* Release RISC pause. */
 646         WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
 647         RD_REG_DWORD(&reg->hccr);       /* PCI Posting. */
 648
 649         return buf;
 650 }
 651
 652 int
 653 qla2x00_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 654     uint32_t bytes)
 655 {
 656         int ret, stat;
 657         uint32_t i;
 658         uint16_t *wptr;
 659
 660         ret = QLA_SUCCESS;
 661
 662         qla2x00_lock_nvram_access(ha);
 663
 664         /* Disable NVRAM write-protection. */
 665         stat = qla2x00_clear_nvram_protection(ha);
 666
 667         wptr = (uint16_t *)buf;
 668         for (i = 0; i < bytes >> 1; i++, naddr++) {
 669                 qla2x00_write_nvram_word(ha, naddr,
 670                     cpu_to_le16(*wptr));
 671                 wptr++;
 672         }
 673
 674         /* Enable NVRAM write-protection. */
 675         qla2x00_set_nvram_protection(ha, stat);
 676
 677         qla2x00_unlock_nvram_access(ha);
 678
 679         return ret;
 680 }
 681
 682 int
 683 qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 684     uint32_t bytes)
 685 {
 686         int ret;
 687         uint32_t i;
 688         uint32_t *dwptr;
 689         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 690
 691         ret = QLA_SUCCESS;
 692
 693         /* Pause RISC. */
 694         WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
 695         RD_REG_DWORD(&reg->hccr);               /* PCI Posting. */
 696
 697         /* Enable flash write. */
 698         WRT_REG_DWORD(&reg->ctrl_status,
 699             RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 700         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 701
 702         /* Disable NVRAM write-protection. */
 703         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 704             0);
 705         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 706             0);
 707
 708         /* Dword writes to flash. */
 709         dwptr = (uint32_t *)buf;
 710         for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
 711                 ret = qla24xx_write_flash_dword(ha,
 712                     nvram_data_to_access_addr(naddr),
 713                     cpu_to_le32(*dwptr));
 714                 if (ret != QLA_SUCCESS) {
 715                         DEBUG9(printk("%s(%ld) Unable to program "
 716                             "nvram address=%x data=%x.\n", __func__,
 717                             ha->host_no, naddr, *dwptr));
 718                         break;
 719                 }
 720         }
 721
 722         /* Enable NVRAM write-protection. */
 723         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 724             0x8c);
 725
 726         /* Disable flash write. */
 727         WRT_REG_DWORD(&reg->ctrl_status,
 728             RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 729         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 730
 731         /* Release RISC pause. */
 732         WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
 733         RD_REG_DWORD(&reg->hccr);               /* PCI Posting. */
 734
 735         return ret;
 736 }