Merge tag 'iio-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23...

[mirror_ubuntu-artful-kernel.git] / drivers / scsi / ufs / ufshcd.c

/*
 * Universal Flash Storage Host controller driver Core
 *
 * This code is based on drivers/scsi/ufs/ufshcd.c
 * Copyright (C) 2011-2013 Samsung India Software Operations
 * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
 *
 * Authors:
 *      Santosh Yaraganavi <santosh.sy@samsung.com>
 *      Vinayak Holikatti <h.vinayak@samsung.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * See the COPYING file in the top-level directory or visit
 * <http://www.gnu.org/licenses/gpl-2.0.html>
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * This program is provided "AS IS" and "WITH ALL FAULTS" and
 * without warranty of any kind. You are solely responsible for
 * determining the appropriateness of using and distributing
 * the program and assume all risks associated with your exercise
 * of rights with respect to the program, including but not limited
 * to infringement of third party rights, the risks and costs of
 * program errors, damage to or loss of data, programs or equipment,
 * and unavailability or interruption of operations. Under no
 * circumstances will the contributor of this Program be liable for
 * any damages of any kind arising from your use or distribution of
 * this program.
 *
 * The Linux Foundation chooses to take subject only to the GPLv2
 * license terms, and distributes only under these terms.
 */

#include <linux/async.h>
#include <linux/devfreq.h>
#include <linux/nls.h>
#include <linux/of.h>
#include "ufshcd.h"
#include "ufs_quirks.h"
#include "unipro.h"

#define CREATE_TRACE_POINTS
#include <trace/events/ufs.h>

#define UFSHCD_REQ_SENSE_SIZE   18

#define UFSHCD_ENABLE_INTRS     (UTP_TRANSFER_REQ_COMPL |\
                                 UTP_TASK_REQ_COMPL |\
                                 UFSHCD_ERROR_MASK)
/* UIC command timeout, unit: ms */
#define UIC_CMD_TIMEOUT 500

/* NOP OUT retries waiting for NOP IN response */
#define NOP_OUT_RETRIES    10
/* Timeout after 30 msecs if NOP OUT hangs without response */
#define NOP_OUT_TIMEOUT    30 /* msecs */

/* Query request retries */
#define QUERY_REQ_RETRIES 3
/* Query request timeout */
#define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */

/* Task management command timeout */
#define TM_CMD_TIMEOUT  100 /* msecs */

/* maximum number of retries for a general UIC command  */
#define UFS_UIC_COMMAND_RETRIES 3

/* maximum number of link-startup retries */
#define DME_LINKSTARTUP_RETRIES 3

/* Maximum retries for Hibern8 enter */
#define UIC_HIBERN8_ENTER_RETRIES 3

/* maximum number of reset retries before giving up */
#define MAX_HOST_RESET_RETRIES 5

/* Expose the flag value from utp_upiu_query.value */
#define MASK_QUERY_UPIU_FLAG_LOC 0xFF

/* Interrupt aggregation default timeout, unit: 40us */
#define INT_AGGR_DEF_TO 0x02

#define ufshcd_toggle_vreg(_dev, _vreg, _on)                            \
        ({                                                              \
                int _ret;                                               \
                if (_on)                                                \
                        _ret = ufshcd_enable_vreg(_dev, _vreg);         \
                else                                                    \
                        _ret = ufshcd_disable_vreg(_dev, _vreg);        \
                _ret;                                                   \
        })

#define ufshcd_hex_dump(prefix_str, buf, len) \
print_hex_dump(KERN_ERR, prefix_str, DUMP_PREFIX_OFFSET, 16, 4, buf, len, false)

enum {
        UFSHCD_MAX_CHANNEL      = 0,
        UFSHCD_MAX_ID           = 1,
        UFSHCD_CMD_PER_LUN      = 32,
        UFSHCD_CAN_QUEUE        = 32,
};

/* UFSHCD states */
enum {
        UFSHCD_STATE_RESET,
        UFSHCD_STATE_ERROR,
        UFSHCD_STATE_OPERATIONAL,
        UFSHCD_STATE_EH_SCHEDULED,
};

/* UFSHCD error handling flags */
enum {
        UFSHCD_EH_IN_PROGRESS = (1 << 0),
};

/* UFSHCD UIC layer error flags */
enum {
        UFSHCD_UIC_DL_PA_INIT_ERROR = (1 << 0), /* Data link layer error */
        UFSHCD_UIC_DL_NAC_RECEIVED_ERROR = (1 << 1), /* Data link layer error */
        UFSHCD_UIC_DL_TCx_REPLAY_ERROR = (1 << 2), /* Data link layer error */
        UFSHCD_UIC_NL_ERROR = (1 << 3), /* Network layer error */
        UFSHCD_UIC_TL_ERROR = (1 << 4), /* Transport Layer error */
        UFSHCD_UIC_DME_ERROR = (1 << 5), /* DME error */
};

#define ufshcd_set_eh_in_progress(h) \
        ((h)->eh_flags |= UFSHCD_EH_IN_PROGRESS)
#define ufshcd_eh_in_progress(h) \
        ((h)->eh_flags & UFSHCD_EH_IN_PROGRESS)
#define ufshcd_clear_eh_in_progress(h) \
        ((h)->eh_flags &= ~UFSHCD_EH_IN_PROGRESS)

#define ufshcd_set_ufs_dev_active(h) \
        ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
#define ufshcd_set_ufs_dev_sleep(h) \
        ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
#define ufshcd_set_ufs_dev_poweroff(h) \
        ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
#define ufshcd_is_ufs_dev_active(h) \
        ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
#define ufshcd_is_ufs_dev_sleep(h) \
        ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
#define ufshcd_is_ufs_dev_poweroff(h) \
        ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)

static struct ufs_pm_lvl_states ufs_pm_lvl_states[] = {
        {UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE},
        {UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE},
        {UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE},
        {UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE},
        {UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE},
        {UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE},
};

static inline enum ufs_dev_pwr_mode
ufs_get_pm_lvl_to_dev_pwr_mode(enum ufs_pm_level lvl)
{
        return ufs_pm_lvl_states[lvl].dev_state;
}

static inline enum uic_link_state
ufs_get_pm_lvl_to_link_pwr_state(enum ufs_pm_level lvl)
{
        return ufs_pm_lvl_states[lvl].link_state;
}

static inline enum ufs_pm_level
ufs_get_desired_pm_lvl_for_dev_link_state(enum ufs_dev_pwr_mode dev_state,
                                        enum uic_link_state link_state)
{
        enum ufs_pm_level lvl;

        for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++) {
                if ((ufs_pm_lvl_states[lvl].dev_state == dev_state) &&
                        (ufs_pm_lvl_states[lvl].link_state == link_state))
                        return lvl;
        }

        /* if no match found, return the level 0 */
        return UFS_PM_LVL_0;
}

static struct ufs_dev_fix ufs_fixups[] = {
        /* UFS cards deviations table */
        UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
                UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
        UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
        UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
                UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
        UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
                UFS_DEVICE_NO_FASTAUTO),
        UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
                UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
        UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
                UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
        UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
                UFS_DEVICE_QUIRK_PA_TACTIVATE),
        UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
                UFS_DEVICE_QUIRK_PA_TACTIVATE),
        UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
        UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL,
                UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME),

        END_FIX
};

static void ufshcd_tmc_handler(struct ufs_hba *hba);
static void ufshcd_async_scan(void *data, async_cookie_t cookie);
static int ufshcd_reset_and_restore(struct ufs_hba *hba);
static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd);
static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
static void ufshcd_hba_exit(struct ufs_hba *hba);
static int ufshcd_probe_hba(struct ufs_hba *hba);
static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
                                 bool skip_ref_clk);
static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused);
static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
static void ufshcd_resume_clkscaling(struct ufs_hba *hba);
static void ufshcd_suspend_clkscaling(struct ufs_hba *hba);
static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba);
static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up);
static irqreturn_t ufshcd_intr(int irq, void *__hba);
static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
                struct ufs_pa_layer_attr *desired_pwr_mode);
static int ufshcd_change_power_mode(struct ufs_hba *hba,
                             struct ufs_pa_layer_attr *pwr_mode);
static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag)
{
        return tag >= 0 && tag < hba->nutrs;
}

static inline int ufshcd_enable_irq(struct ufs_hba *hba)
{
        int ret = 0;

        if (!hba->is_irq_enabled) {
                ret = request_irq(hba->irq, ufshcd_intr, IRQF_SHARED, UFSHCD,
                                hba);
                if (ret)
                        dev_err(hba->dev, "%s: request_irq failed, ret=%d\n",
                                __func__, ret);
                hba->is_irq_enabled = true;
        }

        return ret;
}

static inline void ufshcd_disable_irq(struct ufs_hba *hba)
{
        if (hba->is_irq_enabled) {
                free_irq(hba->irq, hba);
                hba->is_irq_enabled = false;
        }
}

/* replace non-printable or non-ASCII characters with spaces */
static inline void ufshcd_remove_non_printable(char *val)
{
        if (!val)
                return;

        if (*val < 0x20 || *val > 0x7e)
                *val = ' ';
}

static void ufshcd_add_command_trace(struct ufs_hba *hba,
                unsigned int tag, const char *str)
{
        sector_t lba = -1;
        u8 opcode = 0;
        u32 intr, doorbell;
        struct ufshcd_lrb *lrbp;
        int transfer_len = -1;

        if (!trace_ufshcd_command_enabled())
                return;

        lrbp = &hba->lrb[tag];

        if (lrbp->cmd) { /* data phase exists */
                opcode = (u8)(*lrbp->cmd->cmnd);
                if ((opcode == READ_10) || (opcode == WRITE_10)) {
                        /*
                         * Currently we only fully trace read(10) and write(10)
                         * commands
                         */
                        if (lrbp->cmd->request && lrbp->cmd->request->bio)
                                lba =
                                  lrbp->cmd->request->bio->bi_iter.bi_sector;
                        transfer_len = be32_to_cpu(
                                lrbp->ucd_req_ptr->sc.exp_data_transfer_len);
                }
        }

        intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
        doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
        trace_ufshcd_command(dev_name(hba->dev), str, tag,
                                doorbell, transfer_len, intr, lba, opcode);
}

static void ufshcd_print_clk_freqs(struct ufs_hba *hba)
{
        struct ufs_clk_info *clki;
        struct list_head *head = &hba->clk_list_head;

        if (!head || list_empty(head))
                return;

        list_for_each_entry(clki, head, list) {
                if (!IS_ERR_OR_NULL(clki->clk) && clki->min_freq &&
                                clki->max_freq)
                        dev_err(hba->dev, "clk: %s, rate: %u\n",
                                        clki->name, clki->curr_freq);
        }
}

static void ufshcd_print_uic_err_hist(struct ufs_hba *hba,
                struct ufs_uic_err_reg_hist *err_hist, char *err_name)
{
        int i;

        for (i = 0; i < UIC_ERR_REG_HIST_LENGTH; i++) {
                int p = (i + err_hist->pos - 1) % UIC_ERR_REG_HIST_LENGTH;

                if (err_hist->reg[p] == 0)
                        continue;
                dev_err(hba->dev, "%s[%d] = 0x%x at %lld us\n", err_name, i,
                        err_hist->reg[p], ktime_to_us(err_hist->tstamp[p]));
        }
}

static void ufshcd_print_host_regs(struct ufs_hba *hba)
{
        /*
         * hex_dump reads its data without the readl macro. This might
         * cause inconsistency issues on some platform, as the printed
         * values may be from cache and not the most recent value.
         * To know whether you are looking at an un-cached version verify
         * that IORESOURCE_MEM flag is on when xxx_get_resource() is invoked
         * during platform/pci probe function.
         */
        ufshcd_hex_dump("host regs: ", hba->mmio_base, UFSHCI_REG_SPACE_SIZE);
        dev_err(hba->dev, "hba->ufs_version = 0x%x, hba->capabilities = 0x%x\n",
                hba->ufs_version, hba->capabilities);
        dev_err(hba->dev,
                "hba->outstanding_reqs = 0x%x, hba->outstanding_tasks = 0x%x\n",
                (u32)hba->outstanding_reqs, (u32)hba->outstanding_tasks);
        dev_err(hba->dev,
                "last_hibern8_exit_tstamp at %lld us, hibern8_exit_cnt = %d\n",
                ktime_to_us(hba->ufs_stats.last_hibern8_exit_tstamp),
                hba->ufs_stats.hibern8_exit_cnt);

        ufshcd_print_uic_err_hist(hba, &hba->ufs_stats.pa_err, "pa_err");
        ufshcd_print_uic_err_hist(hba, &hba->ufs_stats.dl_err, "dl_err");
        ufshcd_print_uic_err_hist(hba, &hba->ufs_stats.nl_err, "nl_err");
        ufshcd_print_uic_err_hist(hba, &hba->ufs_stats.tl_err, "tl_err");
        ufshcd_print_uic_err_hist(hba, &hba->ufs_stats.dme_err, "dme_err");

        ufshcd_print_clk_freqs(hba);

        if (hba->vops && hba->vops->dbg_register_dump)
                hba->vops->dbg_register_dump(hba);
}

static
void ufshcd_print_trs(struct ufs_hba *hba, unsigned long bitmap, bool pr_prdt)
{
        struct ufshcd_lrb *lrbp;
        int prdt_length;
        int tag;

        for_each_set_bit(tag, &bitmap, hba->nutrs) {
                lrbp = &hba->lrb[tag];

                dev_err(hba->dev, "UPIU[%d] - issue time %lld us\n",
                                tag, ktime_to_us(lrbp->issue_time_stamp));
                dev_err(hba->dev,
                        "UPIU[%d] - Transfer Request Descriptor phys@0x%llx\n",
                        tag, (u64)lrbp->utrd_dma_addr);

                ufshcd_hex_dump("UPIU TRD: ", lrbp->utr_descriptor_ptr,
                                sizeof(struct utp_transfer_req_desc));
                dev_err(hba->dev, "UPIU[%d] - Request UPIU phys@0x%llx\n", tag,
                        (u64)lrbp->ucd_req_dma_addr);
                ufshcd_hex_dump("UPIU REQ: ", lrbp->ucd_req_ptr,
                                sizeof(struct utp_upiu_req));
                dev_err(hba->dev, "UPIU[%d] - Response UPIU phys@0x%llx\n", tag,
                        (u64)lrbp->ucd_rsp_dma_addr);
                ufshcd_hex_dump("UPIU RSP: ", lrbp->ucd_rsp_ptr,
                                sizeof(struct utp_upiu_rsp));

                prdt_length = le16_to_cpu(
                        lrbp->utr_descriptor_ptr->prd_table_length);
                dev_err(hba->dev,
                        "UPIU[%d] - PRDT - %d entries  phys@0x%llx\n",
                        tag, prdt_length,
                        (u64)lrbp->ucd_prdt_dma_addr);

                if (pr_prdt)
                        ufshcd_hex_dump("UPIU PRDT: ", lrbp->ucd_prdt_ptr,
                                sizeof(struct ufshcd_sg_entry) * prdt_length);
        }
}

static void ufshcd_print_tmrs(struct ufs_hba *hba, unsigned long bitmap)
{
        struct utp_task_req_desc *tmrdp;
        int tag;

        for_each_set_bit(tag, &bitmap, hba->nutmrs) {
                tmrdp = &hba->utmrdl_base_addr[tag];
                dev_err(hba->dev, "TM[%d] - Task Management Header\n", tag);
                ufshcd_hex_dump("TM TRD: ", &tmrdp->header,
                                sizeof(struct request_desc_header));
                dev_err(hba->dev, "TM[%d] - Task Management Request UPIU\n",
                                tag);
                ufshcd_hex_dump("TM REQ: ", tmrdp->task_req_upiu,
                                sizeof(struct utp_upiu_req));
                dev_err(hba->dev, "TM[%d] - Task Management Response UPIU\n",
                                tag);
                ufshcd_hex_dump("TM RSP: ", tmrdp->task_rsp_upiu,
                                sizeof(struct utp_task_req_desc));
        }
}

static void ufshcd_print_host_state(struct ufs_hba *hba)
{
        dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state);
        dev_err(hba->dev, "lrb in use=0x%lx, outstanding reqs=0x%lx tasks=0x%lx\n",
                hba->lrb_in_use, hba->outstanding_tasks, hba->outstanding_reqs);
        dev_err(hba->dev, "saved_err=0x%x, saved_uic_err=0x%x\n",
                hba->saved_err, hba->saved_uic_err);
        dev_err(hba->dev, "Device power mode=%d, UIC link state=%d\n",
                hba->curr_dev_pwr_mode, hba->uic_link_state);
        dev_err(hba->dev, "PM in progress=%d, sys. suspended=%d\n",
                hba->pm_op_in_progress, hba->is_sys_suspended);
        dev_err(hba->dev, "Auto BKOPS=%d, Host self-block=%d\n",
                hba->auto_bkops_enabled, hba->host->host_self_blocked);
        dev_err(hba->dev, "Clk gate=%d\n", hba->clk_gating.state);
        dev_err(hba->dev, "error handling flags=0x%x, req. abort count=%d\n",
                hba->eh_flags, hba->req_abort_count);
        dev_err(hba->dev, "Host capabilities=0x%x, caps=0x%x\n",
                hba->capabilities, hba->caps);
        dev_err(hba->dev, "quirks=0x%x, dev. quirks=0x%x\n", hba->quirks,
                hba->dev_quirks);
}

/**
 * ufshcd_print_pwr_info - print power params as saved in hba
 * power info
 * @hba: per-adapter instance
 */
static void ufshcd_print_pwr_info(struct ufs_hba *hba)
{
        static const char * const names[] = {
                "INVALID MODE",
                "FAST MODE",
                "SLOW_MODE",
                "INVALID MODE",
                "FASTAUTO_MODE",
                "SLOWAUTO_MODE",
                "INVALID MODE",
        };

        dev_err(hba->dev, "%s:[RX, TX]: gear=[%d, %d], lane[%d, %d], pwr[%s, %s], rate = %d\n",
                 __func__,
                 hba->pwr_info.gear_rx, hba->pwr_info.gear_tx,
                 hba->pwr_info.lane_rx, hba->pwr_info.lane_tx,
                 names[hba->pwr_info.pwr_rx],
                 names[hba->pwr_info.pwr_tx],
                 hba->pwr_info.hs_rate);
}

/*
 * ufshcd_wait_for_register - wait for register value to change
 * @hba - per-adapter interface
 * @reg - mmio register offset
 * @mask - mask to apply to read register value
 * @val - wait condition
 * @interval_us - polling interval in microsecs
 * @timeout_ms - timeout in millisecs
 * @can_sleep - perform sleep or just spin
 *
 * Returns -ETIMEDOUT on error, zero on success
 */
int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
                                u32 val, unsigned long interval_us,
                                unsigned long timeout_ms, bool can_sleep)
{
        int err = 0;
        unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);

        /* ignore bits that we don't intend to wait on */
        val = val & mask;

        while ((ufshcd_readl(hba, reg) & mask) != val) {
                if (can_sleep)
                        usleep_range(interval_us, interval_us + 50);
                else
                        udelay(interval_us);
                if (time_after(jiffies, timeout)) {
                        if ((ufshcd_readl(hba, reg) & mask) != val)
                                err = -ETIMEDOUT;
                        break;
                }
        }

        return err;
}

/**
 * ufshcd_get_intr_mask - Get the interrupt bit mask
 * @hba - Pointer to adapter instance
 *
 * Returns interrupt bit mask per version
 */
static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba)
{
        u32 intr_mask = 0;

        switch (hba->ufs_version) {
        case UFSHCI_VERSION_10:
                intr_mask = INTERRUPT_MASK_ALL_VER_10;
                break;
        case UFSHCI_VERSION_11:
        case UFSHCI_VERSION_20:
                intr_mask = INTERRUPT_MASK_ALL_VER_11;
                break;
        case UFSHCI_VERSION_21:
        default:
                intr_mask = INTERRUPT_MASK_ALL_VER_21;
                break;
        }

        return intr_mask;
}

/**
 * ufshcd_get_ufs_version - Get the UFS version supported by the HBA
 * @hba - Pointer to adapter instance
 *
 * Returns UFSHCI version supported by the controller
 */
static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba)
{
        if (hba->quirks & UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION)
                return ufshcd_vops_get_ufs_hci_version(hba);

        return ufshcd_readl(hba, REG_UFS_VERSION);
}

/**
 * ufshcd_is_device_present - Check if any device connected to
 *                            the host controller
 * @hba: pointer to adapter instance
 *
 * Returns true if device present, false if no device detected
 */
static inline bool ufshcd_is_device_present(struct ufs_hba *hba)
{
        return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) &
                                                DEVICE_PRESENT) ? true : false;
}

/**
 * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status
 * @lrb: pointer to local command reference block
 *
 * This function is used to get the OCS field from UTRD
 * Returns the OCS field in the UTRD
 */
static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp)
{
        return le32_to_cpu(lrbp->utr_descriptor_ptr->header.dword_2) & MASK_OCS;
}

/**
 * ufshcd_get_tmr_ocs - Get the UTMRD Overall Command Status
 * @task_req_descp: pointer to utp_task_req_desc structure
 *
 * This function is used to get the OCS field from UTMRD
 * Returns the OCS field in the UTMRD
 */
static inline int
ufshcd_get_tmr_ocs(struct utp_task_req_desc *task_req_descp)
{
        return le32_to_cpu(task_req_descp->header.dword_2) & MASK_OCS;
}

/**
 * ufshcd_get_tm_free_slot - get a free slot for task management request
 * @hba: per adapter instance
 * @free_slot: pointer to variable with available slot value
 *
 * Get a free tag and lock it until ufshcd_put_tm_slot() is called.
 * Returns 0 if free slot is not available, else return 1 with tag value
 * in @free_slot.
 */
static bool ufshcd_get_tm_free_slot(struct ufs_hba *hba, int *free_slot)
{
        int tag;
        bool ret = false;

        if (!free_slot)
                goto out;

        do {
                tag = find_first_zero_bit(&hba->tm_slots_in_use, hba->nutmrs);
                if (tag >= hba->nutmrs)
                        goto out;
        } while (test_and_set_bit_lock(tag, &hba->tm_slots_in_use));

        *free_slot = tag;
        ret = true;
out:
        return ret;
}

static inline void ufshcd_put_tm_slot(struct ufs_hba *hba, int slot)
{
        clear_bit_unlock(slot, &hba->tm_slots_in_use);
}

/**
 * ufshcd_utrl_clear - Clear a bit in UTRLCLR register
 * @hba: per adapter instance
 * @pos: position of the bit to be cleared
 */
static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos)
{
        ufshcd_writel(hba, ~(1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR);
}

/**
 * ufshcd_outstanding_req_clear - Clear a bit in outstanding request field
 * @hba: per adapter instance
 * @tag: position of the bit to be cleared
 */
static inline void ufshcd_outstanding_req_clear(struct ufs_hba *hba, int tag)
{
        __clear_bit(tag, &hba->outstanding_reqs);
}

/**
 * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY
 * @reg: Register value of host controller status
 *
 * Returns integer, 0 on Success and positive value if failed
 */
static inline int ufshcd_get_lists_status(u32 reg)
{
        return !((reg & UFSHCD_STATUS_READY) == UFSHCD_STATUS_READY);
}

/**
 * ufshcd_get_uic_cmd_result - Get the UIC command result
 * @hba: Pointer to adapter instance
 *
 * This function gets the result of UIC command completion
 * Returns 0 on success, non zero value on error
 */
static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba)
{
        return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2) &
               MASK_UIC_COMMAND_RESULT;
}

/**
 * ufshcd_get_dme_attr_val - Get the value of attribute returned by UIC command
 * @hba: Pointer to adapter instance
 *
 * This function gets UIC command argument3
 * Returns 0 on success, non zero value on error
 */
static inline u32 ufshcd_get_dme_attr_val(struct ufs_hba *hba)
{
        return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3);
}

/**
 * ufshcd_get_req_rsp - returns the TR response transaction type
 * @ucd_rsp_ptr: pointer to response UPIU
 */
static inline int
ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr)
{
        return be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24;
}

/**
 * ufshcd_get_rsp_upiu_result - Get the result from response UPIU
 * @ucd_rsp_ptr: pointer to response UPIU
 *
 * This function gets the response status and scsi_status from response UPIU
 * Returns the response result code.
 */
static inline int
ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr)
{
        return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT;
}

/*
 * ufshcd_get_rsp_upiu_data_seg_len - Get the data segment length
 *                              from response UPIU
 * @ucd_rsp_ptr: pointer to response UPIU
 *
 * Return the data segment length.
 */
static inline unsigned int
ufshcd_get_rsp_upiu_data_seg_len(struct utp_upiu_rsp *ucd_rsp_ptr)
{
        return be32_to_cpu(ucd_rsp_ptr->header.dword_2) &
                MASK_RSP_UPIU_DATA_SEG_LEN;
}

/**
 * ufshcd_is_exception_event - Check if the device raised an exception event
 * @ucd_rsp_ptr: pointer to response UPIU
 *
 * The function checks if the device raised an exception event indicated in
 * the Device Information field of response UPIU.
 *
 * Returns true if exception is raised, false otherwise.
 */
static inline bool ufshcd_is_exception_event(struct utp_upiu_rsp *ucd_rsp_ptr)
{
        return be32_to_cpu(ucd_rsp_ptr->header.dword_2) &
                        MASK_RSP_EXCEPTION_EVENT ? true : false;
}

/**
 * ufshcd_reset_intr_aggr - Reset interrupt aggregation values.
 * @hba: per adapter instance
 */
static inline void
ufshcd_reset_intr_aggr(struct ufs_hba *hba)
{
        ufshcd_writel(hba, INT_AGGR_ENABLE |
                      INT_AGGR_COUNTER_AND_TIMER_RESET,
                      REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
}

/**
 * ufshcd_config_intr_aggr - Configure interrupt aggregation values.
 * @hba: per adapter instance
 * @cnt: Interrupt aggregation counter threshold
 * @tmout: Interrupt aggregation timeout value
 */
static inline void
ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout)
{
        ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE |
                      INT_AGGR_COUNTER_THLD_VAL(cnt) |
                      INT_AGGR_TIMEOUT_VAL(tmout),
                      REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
}

/**
 * ufshcd_disable_intr_aggr - Disables interrupt aggregation.
 * @hba: per adapter instance
 */
static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba)
{
        ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
}

/**
 * ufshcd_enable_run_stop_reg - Enable run-stop registers,
 *                      When run-stop registers are set to 1, it indicates the
 *                      host controller that it can process the requests
 * @hba: per adapter instance
 */
static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
{
        ufshcd_writel(hba, UTP_TASK_REQ_LIST_RUN_STOP_BIT,
                      REG_UTP_TASK_REQ_LIST_RUN_STOP);
        ufshcd_writel(hba, UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT,
                      REG_UTP_TRANSFER_REQ_LIST_RUN_STOP);
}

/**
 * ufshcd_hba_start - Start controller initialization sequence
 * @hba: per adapter instance
 */
static inline void ufshcd_hba_start(struct ufs_hba *hba)
{
        ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE);
}

/**
 * ufshcd_is_hba_active - Get controller state
 * @hba: per adapter instance
 *
 * Returns false if controller is active, true otherwise
 */
static inline bool ufshcd_is_hba_active(struct ufs_hba *hba)
{
        return (ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & CONTROLLER_ENABLE)
                ? false : true;
}

static const char *ufschd_uic_link_state_to_string(
                        enum uic_link_state state)
{
        switch (state) {
        case UIC_LINK_OFF_STATE:        return "OFF";
        case UIC_LINK_ACTIVE_STATE:     return "ACTIVE";
        case UIC_LINK_HIBERN8_STATE:    return "HIBERN8";
        default:                        return "UNKNOWN";
        }
}

static const char *ufschd_ufs_dev_pwr_mode_to_string(
                        enum ufs_dev_pwr_mode state)
{
        switch (state) {
        case UFS_ACTIVE_PWR_MODE:       return "ACTIVE";
        case UFS_SLEEP_PWR_MODE:        return "SLEEP";
        case UFS_POWERDOWN_PWR_MODE:    return "POWERDOWN";
        default:                        return "UNKNOWN";
        }
}

u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba)
{
        /* HCI version 1.0 and 1.1 supports UniPro 1.41 */
        if ((hba->ufs_version == UFSHCI_VERSION_10) ||
            (hba->ufs_version == UFSHCI_VERSION_11))
                return UFS_UNIPRO_VER_1_41;
        else
                return UFS_UNIPRO_VER_1_6;
}
EXPORT_SYMBOL(ufshcd_get_local_unipro_ver);

static bool ufshcd_is_unipro_pa_params_tuning_req(struct ufs_hba *hba)
{
        /*
         * If both host and device support UniPro ver1.6 or later, PA layer
         * parameters tuning happens during link startup itself.
         *
         * We can manually tune PA layer parameters if either host or device
         * doesn't support UniPro ver 1.6 or later. But to keep manual tuning
         * logic simple, we will only do manual tuning if local unipro version
         * doesn't support ver1.6 or later.
         */
        if (ufshcd_get_local_unipro_ver(hba) < UFS_UNIPRO_VER_1_6)
                return true;
        else
                return false;
}

static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
{
        int ret = 0;
        struct ufs_clk_info *clki;
        struct list_head *head = &hba->clk_list_head;
        ktime_t start = ktime_get();
        bool clk_state_changed = false;

        if (!head || list_empty(head))
                goto out;

        ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
        if (ret)
                return ret;

        list_for_each_entry(clki, head, list) {
                if (!IS_ERR_OR_NULL(clki->clk)) {
                        if (scale_up && clki->max_freq) {
                                if (clki->curr_freq == clki->max_freq)
                                        continue;

                                clk_state_changed = true;
                                ret = clk_set_rate(clki->clk, clki->max_freq);
                                if (ret) {
                                        dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
                                                __func__, clki->name,
                                                clki->max_freq, ret);
                                        break;
                                }
                                trace_ufshcd_clk_scaling(dev_name(hba->dev),
                                                "scaled up", clki->name,
                                                clki->curr_freq,
                                                clki->max_freq);

                                clki->curr_freq = clki->max_freq;

                        } else if (!scale_up && clki->min_freq) {
                                if (clki->curr_freq == clki->min_freq)
                                        continue;

                                clk_state_changed = true;
                                ret = clk_set_rate(clki->clk, clki->min_freq);
                                if (ret) {
                                        dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
                                                __func__, clki->name,
                                                clki->min_freq, ret);
                                        break;
                                }
                                trace_ufshcd_clk_scaling(dev_name(hba->dev),
                                                "scaled down", clki->name,
                                                clki->curr_freq,
                                                clki->min_freq);
                                clki->curr_freq = clki->min_freq;
                        }
                }
                dev_dbg(hba->dev, "%s: clk: %s, rate: %lu\n", __func__,
                                clki->name, clk_get_rate(clki->clk));
        }

        ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);

out:
        if (clk_state_changed)
                trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
                        (scale_up ? "up" : "down"),
                        ktime_to_us(ktime_sub(ktime_get(), start)), ret);
        return ret;
}

/**
 * ufshcd_is_devfreq_scaling_required - check if scaling is required or not
 * @hba: per adapter instance
 * @scale_up: True if scaling up and false if scaling down
 *
 * Returns true if scaling is required, false otherwise.
 */
static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba,
                                               bool scale_up)
{
        struct ufs_clk_info *clki;
        struct list_head *head = &hba->clk_list_head;

        if (!head || list_empty(head))
                return false;

        list_for_each_entry(clki, head, list) {
                if (!IS_ERR_OR_NULL(clki->clk)) {
                        if (scale_up && clki->max_freq) {
                                if (clki->curr_freq == clki->max_freq)
                                        continue;
                                return true;
                        } else if (!scale_up && clki->min_freq) {
                                if (clki->curr_freq == clki->min_freq)
                                        continue;
                                return true;
                        }
                }
        }

        return false;
}

static int ufshcd_wait_for_doorbell_clr(struct ufs_hba *hba,
                                        u64 wait_timeout_us)
{
        unsigned long flags;
        int ret = 0;
        u32 tm_doorbell;
        u32 tr_doorbell;
        bool timeout = false, do_last_check = false;
        ktime_t start;

        ufshcd_hold(hba, false);
        spin_lock_irqsave(hba->host->host_lock, flags);
        /*
         * Wait for all the outstanding tasks/transfer requests.
         * Verify by checking the doorbell registers are clear.
         */
        start = ktime_get();
        do {
                if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) {
                        ret = -EBUSY;
                        goto out;
                }

                tm_doorbell = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL);
                tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
                if (!tm_doorbell && !tr_doorbell) {
                        timeout = false;
                        break;
                } else if (do_last_check) {
                        break;
                }

                spin_unlock_irqrestore(hba->host->host_lock, flags);
                schedule();
                if (ktime_to_us(ktime_sub(ktime_get(), start)) >
                    wait_timeout_us) {
                        timeout = true;
                        /*
                         * We might have scheduled out for long time so make
                         * sure to check if doorbells are cleared by this time
                         * or not.
                         */
                        do_last_check = true;
                }
                spin_lock_irqsave(hba->host->host_lock, flags);
        } while (tm_doorbell || tr_doorbell);

        if (timeout) {
                dev_err(hba->dev,
                        "%s: timedout waiting for doorbell to clear (tm=0x%x, tr=0x%x)\n",
                        __func__, tm_doorbell, tr_doorbell);
                ret = -EBUSY;
        }
out:
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        ufshcd_release(hba);
        return ret;
}

/**
 * ufshcd_scale_gear - scale up/down UFS gear
 * @hba: per adapter instance
 * @scale_up: True for scaling up gear and false for scaling down
 *
 * Returns 0 for success,
 * Returns -EBUSY if scaling can't happen at this time
 * Returns non-zero for any other errors
 */
static int ufshcd_scale_gear(struct ufs_hba *hba, bool scale_up)
{
        #define UFS_MIN_GEAR_TO_SCALE_DOWN      UFS_HS_G1
        int ret = 0;
        struct ufs_pa_layer_attr new_pwr_info;

        if (scale_up) {
                memcpy(&new_pwr_info, &hba->clk_scaling.saved_pwr_info.info,
                       sizeof(struct ufs_pa_layer_attr));
        } else {
                memcpy(&new_pwr_info, &hba->pwr_info,
                       sizeof(struct ufs_pa_layer_attr));

                if (hba->pwr_info.gear_tx > UFS_MIN_GEAR_TO_SCALE_DOWN
                    || hba->pwr_info.gear_rx > UFS_MIN_GEAR_TO_SCALE_DOWN) {
                        /* save the current power mode */
                        memcpy(&hba->clk_scaling.saved_pwr_info.info,
                                &hba->pwr_info,
                                sizeof(struct ufs_pa_layer_attr));

                        /* scale down gear */
                        new_pwr_info.gear_tx = UFS_MIN_GEAR_TO_SCALE_DOWN;
                        new_pwr_info.gear_rx = UFS_MIN_GEAR_TO_SCALE_DOWN;
                }
        }

        /* check if the power mode needs to be changed or not? */
        ret = ufshcd_change_power_mode(hba, &new_pwr_info);

        if (ret)
                dev_err(hba->dev, "%s: failed err %d, old gear: (tx %d rx %d), new gear: (tx %d rx %d)",
                        __func__, ret,
                        hba->pwr_info.gear_tx, hba->pwr_info.gear_rx,
                        new_pwr_info.gear_tx, new_pwr_info.gear_rx);

        return ret;
}

static int ufshcd_clock_scaling_prepare(struct ufs_hba *hba)
{
        #define DOORBELL_CLR_TOUT_US            (1000 * 1000) /* 1 sec */
        int ret = 0;
        /*
         * make sure that there are no outstanding requests when
         * clock scaling is in progress
         */
        scsi_block_requests(hba->host);
        down_write(&hba->clk_scaling_lock);
        if (ufshcd_wait_for_doorbell_clr(hba, DOORBELL_CLR_TOUT_US)) {
                ret = -EBUSY;
                up_write(&hba->clk_scaling_lock);
                scsi_unblock_requests(hba->host);
        }

        return ret;
}

static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba)
{
        up_write(&hba->clk_scaling_lock);
        scsi_unblock_requests(hba->host);
}

/**
 * ufshcd_devfreq_scale - scale up/down UFS clocks and gear
 * @hba: per adapter instance
 * @scale_up: True for scaling up and false for scalin down
 *
 * Returns 0 for success,
 * Returns -EBUSY if scaling can't happen at this time
 * Returns non-zero for any other errors
 */
static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up)
{
        int ret = 0;

        /* let's not get into low power until clock scaling is completed */
        ufshcd_hold(hba, false);

        ret = ufshcd_clock_scaling_prepare(hba);
        if (ret)
                return ret;

        /* scale down the gear before scaling down clocks */
        if (!scale_up) {
                ret = ufshcd_scale_gear(hba, false);
                if (ret)
                        goto out;
        }

        ret = ufshcd_scale_clks(hba, scale_up);
        if (ret) {
                if (!scale_up)
                        ufshcd_scale_gear(hba, true);
                goto out;
        }

        /* scale up the gear after scaling up clocks */
        if (scale_up) {
                ret = ufshcd_scale_gear(hba, true);
                if (ret) {
                        ufshcd_scale_clks(hba, false);
                        goto out;
                }
        }

        ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);

out:
        ufshcd_clock_scaling_unprepare(hba);
        ufshcd_release(hba);
        return ret;
}

static void ufshcd_clk_scaling_suspend_work(struct work_struct *work)
{
        struct ufs_hba *hba = container_of(work, struct ufs_hba,
                                           clk_scaling.suspend_work);
        unsigned long irq_flags;

        spin_lock_irqsave(hba->host->host_lock, irq_flags);
        if (hba->clk_scaling.active_reqs || hba->clk_scaling.is_suspended) {
                spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
                return;
        }
        hba->clk_scaling.is_suspended = true;
        spin_unlock_irqrestore(hba->host->host_lock, irq_flags);

        __ufshcd_suspend_clkscaling(hba);
}

static void ufshcd_clk_scaling_resume_work(struct work_struct *work)
{
        struct ufs_hba *hba = container_of(work, struct ufs_hba,
                                           clk_scaling.resume_work);
        unsigned long irq_flags;

        spin_lock_irqsave(hba->host->host_lock, irq_flags);
        if (!hba->clk_scaling.is_suspended) {
                spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
                return;
        }
        hba->clk_scaling.is_suspended = false;
        spin_unlock_irqrestore(hba->host->host_lock, irq_flags);

        devfreq_resume_device(hba->devfreq);
}

static int ufshcd_devfreq_target(struct device *dev,
                                unsigned long *freq, u32 flags)
{
        int ret = 0;
        struct ufs_hba *hba = dev_get_drvdata(dev);
        ktime_t start;
        bool scale_up, sched_clk_scaling_suspend_work = false;
        unsigned long irq_flags;

        if (!ufshcd_is_clkscaling_supported(hba))
                return -EINVAL;

        if ((*freq > 0) && (*freq < UINT_MAX)) {
                dev_err(hba->dev, "%s: invalid freq = %lu\n", __func__, *freq);
                return -EINVAL;
        }

        spin_lock_irqsave(hba->host->host_lock, irq_flags);
        if (ufshcd_eh_in_progress(hba)) {
                spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
                return 0;
        }

        if (!hba->clk_scaling.active_reqs)
                sched_clk_scaling_suspend_work = true;

        scale_up = (*freq == UINT_MAX) ? true : false;
        if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) {
                spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
                ret = 0;
                goto out; /* no state change required */
        }
        spin_unlock_irqrestore(hba->host->host_lock, irq_flags);

        start = ktime_get();
        ret = ufshcd_devfreq_scale(hba, scale_up);

        trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
                (scale_up ? "up" : "down"),
                ktime_to_us(ktime_sub(ktime_get(), start)), ret);

out:
        if (sched_clk_scaling_suspend_work)
                queue_work(hba->clk_scaling.workq,
                           &hba->clk_scaling.suspend_work);

        return ret;
}


static int ufshcd_devfreq_get_dev_status(struct device *dev,
                struct devfreq_dev_status *stat)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);
        struct ufs_clk_scaling *scaling = &hba->clk_scaling;
        unsigned long flags;

        if (!ufshcd_is_clkscaling_supported(hba))
                return -EINVAL;

        memset(stat, 0, sizeof(*stat));

        spin_lock_irqsave(hba->host->host_lock, flags);
        if (!scaling->window_start_t)
                goto start_window;

        if (scaling->is_busy_started)
                scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(),
                                        scaling->busy_start_t));

        stat->total_time = jiffies_to_usecs((long)jiffies -
                                (long)scaling->window_start_t);
        stat->busy_time = scaling->tot_busy_t;
start_window:
        scaling->window_start_t = jiffies;
        scaling->tot_busy_t = 0;

        if (hba->outstanding_reqs) {
                scaling->busy_start_t = ktime_get();
                scaling->is_busy_started = true;
        } else {
                scaling->busy_start_t = 0;
                scaling->is_busy_started = false;
        }
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        return 0;
}

static struct devfreq_dev_profile ufs_devfreq_profile = {
        .polling_ms     = 100,
        .target         = ufshcd_devfreq_target,
        .get_dev_status = ufshcd_devfreq_get_dev_status,
};

static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba)
{
        unsigned long flags;

        devfreq_suspend_device(hba->devfreq);
        spin_lock_irqsave(hba->host->host_lock, flags);
        hba->clk_scaling.window_start_t = 0;
        spin_unlock_irqrestore(hba->host->host_lock, flags);
}

static void ufshcd_suspend_clkscaling(struct ufs_hba *hba)
{
        unsigned long flags;
        bool suspend = false;

        if (!ufshcd_is_clkscaling_supported(hba))
                return;

        spin_lock_irqsave(hba->host->host_lock, flags);
        if (!hba->clk_scaling.is_suspended) {
                suspend = true;
                hba->clk_scaling.is_suspended = true;
        }
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        if (suspend)
                __ufshcd_suspend_clkscaling(hba);
}

static void ufshcd_resume_clkscaling(struct ufs_hba *hba)
{
        unsigned long flags;
        bool resume = false;

        if (!ufshcd_is_clkscaling_supported(hba))
                return;

        spin_lock_irqsave(hba->host->host_lock, flags);
        if (hba->clk_scaling.is_suspended) {
                resume = true;
                hba->clk_scaling.is_suspended = false;
        }
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        if (resume)
                devfreq_resume_device(hba->devfreq);
}

static ssize_t ufshcd_clkscale_enable_show(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);

        return snprintf(buf, PAGE_SIZE, "%d\n", hba->clk_scaling.is_allowed);
}

static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);
        u32 value;
        int err;

        if (kstrtou32(buf, 0, &value))
                return -EINVAL;

        value = !!value;
        if (value == hba->clk_scaling.is_allowed)
                goto out;

        pm_runtime_get_sync(hba->dev);
        ufshcd_hold(hba, false);

        cancel_work_sync(&hba->clk_scaling.suspend_work);
        cancel_work_sync(&hba->clk_scaling.resume_work);

        hba->clk_scaling.is_allowed = value;

        if (value) {
                ufshcd_resume_clkscaling(hba);
        } else {
                ufshcd_suspend_clkscaling(hba);
                err = ufshcd_devfreq_scale(hba, true);
                if (err)
                        dev_err(hba->dev, "%s: failed to scale clocks up %d\n",
                                        __func__, err);
        }

        ufshcd_release(hba);
        pm_runtime_put_sync(hba->dev);
out:
        return count;
}

static void ufshcd_clkscaling_init_sysfs(struct ufs_hba *hba)
{
        hba->clk_scaling.enable_attr.show = ufshcd_clkscale_enable_show;
        hba->clk_scaling.enable_attr.store = ufshcd_clkscale_enable_store;
        sysfs_attr_init(&hba->clk_scaling.enable_attr.attr);
        hba->clk_scaling.enable_attr.attr.name = "clkscale_enable";
        hba->clk_scaling.enable_attr.attr.mode = 0644;
        if (device_create_file(hba->dev, &hba->clk_scaling.enable_attr))
                dev_err(hba->dev, "Failed to create sysfs for clkscale_enable\n");
}

static void ufshcd_ungate_work(struct work_struct *work)
{
        int ret;
        unsigned long flags;
        struct ufs_hba *hba = container_of(work, struct ufs_hba,
                        clk_gating.ungate_work);

        cancel_delayed_work_sync(&hba->clk_gating.gate_work);

        spin_lock_irqsave(hba->host->host_lock, flags);
        if (hba->clk_gating.state == CLKS_ON) {
                spin_unlock_irqrestore(hba->host->host_lock, flags);
                goto unblock_reqs;
        }

        spin_unlock_irqrestore(hba->host->host_lock, flags);
        ufshcd_setup_clocks(hba, true);

        /* Exit from hibern8 */
        if (ufshcd_can_hibern8_during_gating(hba)) {
                /* Prevent gating in this path */
                hba->clk_gating.is_suspended = true;
                if (ufshcd_is_link_hibern8(hba)) {
                        ret = ufshcd_uic_hibern8_exit(hba);
                        if (ret)
                                dev_err(hba->dev, "%s: hibern8 exit failed %d\n",
                                        __func__, ret);
                        else
                                ufshcd_set_link_active(hba);
                }
                hba->clk_gating.is_suspended = false;
        }
unblock_reqs:
        scsi_unblock_requests(hba->host);
}

/**
 * ufshcd_hold - Enable clocks that were gated earlier due to ufshcd_release.
 * Also, exit from hibern8 mode and set the link as active.
 * @hba: per adapter instance
 * @async: This indicates whether caller should ungate clocks asynchronously.
 */
int ufshcd_hold(struct ufs_hba *hba, bool async)
{
        int rc = 0;
        unsigned long flags;

        if (!ufshcd_is_clkgating_allowed(hba))
                goto out;
        spin_lock_irqsave(hba->host->host_lock, flags);
        hba->clk_gating.active_reqs++;

        if (ufshcd_eh_in_progress(hba)) {
                spin_unlock_irqrestore(hba->host->host_lock, flags);
                return 0;
        }

start:
        switch (hba->clk_gating.state) {
        case CLKS_ON:
                /*
                 * Wait for the ungate work to complete if in progress.
                 * Though the clocks may be in ON state, the link could
                 * still be in hibner8 state if hibern8 is allowed
                 * during clock gating.
                 * Make sure we exit hibern8 state also in addition to
                 * clocks being ON.
                 */
                if (ufshcd_can_hibern8_during_gating(hba) &&
                    ufshcd_is_link_hibern8(hba)) {
                        spin_unlock_irqrestore(hba->host->host_lock, flags);
                        flush_work(&hba->clk_gating.ungate_work);
                        spin_lock_irqsave(hba->host->host_lock, flags);
                        goto start;
                }
                break;
        case REQ_CLKS_OFF:
                if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
                        hba->clk_gating.state = CLKS_ON;
                        trace_ufshcd_clk_gating(dev_name(hba->dev),
                                                hba->clk_gating.state);
                        break;
                }
                /*
                 * If we are here, it means gating work is either done or
                 * currently running. Hence, fall through to cancel gating
                 * work and to enable clocks.
                 */
        case CLKS_OFF:
                scsi_block_requests(hba->host);
                hba->clk_gating.state = REQ_CLKS_ON;
                trace_ufshcd_clk_gating(dev_name(hba->dev),
                                        hba->clk_gating.state);
                schedule_work(&hba->clk_gating.ungate_work);
                /*
                 * fall through to check if we should wait for this
                 * work to be done or not.
                 */
        case REQ_CLKS_ON:
                if (async) {
                        rc = -EAGAIN;
                        hba->clk_gating.active_reqs--;
                        break;
                }

                spin_unlock_irqrestore(hba->host->host_lock, flags);
                flush_work(&hba->clk_gating.ungate_work);
                /* Make sure state is CLKS_ON before returning */
                spin_lock_irqsave(hba->host->host_lock, flags);
                goto start;
        default:
                dev_err(hba->dev, "%s: clk gating is in invalid state %d\n",
                                __func__, hba->clk_gating.state);
                break;
        }
        spin_unlock_irqrestore(hba->host->host_lock, flags);
out:
        return rc;
}
EXPORT_SYMBOL_GPL(ufshcd_hold);

static void ufshcd_gate_work(struct work_struct *work)
{
        struct ufs_hba *hba = container_of(work, struct ufs_hba,
                        clk_gating.gate_work.work);
        unsigned long flags;

        spin_lock_irqsave(hba->host->host_lock, flags);
        /*
         * In case you are here to cancel this work the gating state
         * would be marked as REQ_CLKS_ON. In this case save time by
         * skipping the gating work and exit after changing the clock
         * state to CLKS_ON.
         */
        if (hba->clk_gating.is_suspended ||
                (hba->clk_gating.state == REQ_CLKS_ON)) {
                hba->clk_gating.state = CLKS_ON;
                trace_ufshcd_clk_gating(dev_name(hba->dev),
                                        hba->clk_gating.state);
                goto rel_lock;
        }

        if (hba->clk_gating.active_reqs
                || hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL
                || hba->lrb_in_use || hba->outstanding_tasks
                || hba->active_uic_cmd || hba->uic_async_done)
                goto rel_lock;

        spin_unlock_irqrestore(hba->host->host_lock, flags);

        /* put the link into hibern8 mode before turning off clocks */
        if (ufshcd_can_hibern8_during_gating(hba)) {
                if (ufshcd_uic_hibern8_enter(hba)) {
                        hba->clk_gating.state = CLKS_ON;
                        trace_ufshcd_clk_gating(dev_name(hba->dev),
                                                hba->clk_gating.state);
                        goto out;
                }
                ufshcd_set_link_hibern8(hba);
        }

        if (!ufshcd_is_link_active(hba))
                ufshcd_setup_clocks(hba, false);
        else
                /* If link is active, device ref_clk can't be switched off */
                __ufshcd_setup_clocks(hba, false, true);

        /*
         * In case you are here to cancel this work the gating state
         * would be marked as REQ_CLKS_ON. In this case keep the state
         * as REQ_CLKS_ON which would anyway imply that clocks are off
         * and a request to turn them on is pending. By doing this way,
         * we keep the state machine in tact and this would ultimately
         * prevent from doing cancel work multiple times when there are
         * new requests arriving before the current cancel work is done.
         */
        spin_lock_irqsave(hba->host->host_lock, flags);
        if (hba->clk_gating.state == REQ_CLKS_OFF) {
                hba->clk_gating.state = CLKS_OFF;
                trace_ufshcd_clk_gating(dev_name(hba->dev),
                                        hba->clk_gating.state);
        }
rel_lock:
        spin_unlock_irqrestore(hba->host->host_lock, flags);
out:
        return;
}

/* host lock must be held before calling this variant */
static void __ufshcd_release(struct ufs_hba *hba)
{
        if (!ufshcd_is_clkgating_allowed(hba))
                return;

        hba->clk_gating.active_reqs--;

        if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended
                || hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL
                || hba->lrb_in_use || hba->outstanding_tasks
                || hba->active_uic_cmd || hba->uic_async_done
                || ufshcd_eh_in_progress(hba))
                return;

        hba->clk_gating.state = REQ_CLKS_OFF;
        trace_ufshcd_clk_gating(dev_name(hba->dev), hba->clk_gating.state);
        schedule_delayed_work(&hba->clk_gating.gate_work,
                        msecs_to_jiffies(hba->clk_gating.delay_ms));
}

void ufshcd_release(struct ufs_hba *hba)
{
        unsigned long flags;

        spin_lock_irqsave(hba->host->host_lock, flags);
        __ufshcd_release(hba);
        spin_unlock_irqrestore(hba->host->host_lock, flags);
}
EXPORT_SYMBOL_GPL(ufshcd_release);

static ssize_t ufshcd_clkgate_delay_show(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);

        return snprintf(buf, PAGE_SIZE, "%lu\n", hba->clk_gating.delay_ms);
}

static ssize_t ufshcd_clkgate_delay_store(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);
        unsigned long flags, value;

        if (kstrtoul(buf, 0, &value))
                return -EINVAL;

        spin_lock_irqsave(hba->host->host_lock, flags);
        hba->clk_gating.delay_ms = value;
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        return count;
}

static ssize_t ufshcd_clkgate_enable_show(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);

        return snprintf(buf, PAGE_SIZE, "%d\n", hba->clk_gating.is_enabled);
}

static ssize_t ufshcd_clkgate_enable_store(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);
        unsigned long flags;
        u32 value;

        if (kstrtou32(buf, 0, &value))
                return -EINVAL;

        value = !!value;
        if (value == hba->clk_gating.is_enabled)
                goto out;

        if (value) {
                ufshcd_release(hba);
        } else {
                spin_lock_irqsave(hba->host->host_lock, flags);
                hba->clk_gating.active_reqs++;
                spin_unlock_irqrestore(hba->host->host_lock, flags);
        }

        hba->clk_gating.is_enabled = value;
out:
        return count;
}

static void ufshcd_init_clk_gating(struct ufs_hba *hba)
{
        if (!ufshcd_is_clkgating_allowed(hba))
                return;

        hba->clk_gating.delay_ms = 150;
        INIT_DELAYED_WORK(&hba->clk_gating.gate_work, ufshcd_gate_work);
        INIT_WORK(&hba->clk_gating.ungate_work, ufshcd_ungate_work);

        hba->clk_gating.is_enabled = true;

        hba->clk_gating.delay_attr.show = ufshcd_clkgate_delay_show;
        hba->clk_gating.delay_attr.store = ufshcd_clkgate_delay_store;
        sysfs_attr_init(&hba->clk_gating.delay_attr.attr);
        hba->clk_gating.delay_attr.attr.name = "clkgate_delay_ms";
        hba->clk_gating.delay_attr.attr.mode = 0644;
        if (device_create_file(hba->dev, &hba->clk_gating.delay_attr))
                dev_err(hba->dev, "Failed to create sysfs for clkgate_delay\n");

        hba->clk_gating.enable_attr.show = ufshcd_clkgate_enable_show;
        hba->clk_gating.enable_attr.store = ufshcd_clkgate_enable_store;
        sysfs_attr_init(&hba->clk_gating.enable_attr.attr);
        hba->clk_gating.enable_attr.attr.name = "clkgate_enable";
        hba->clk_gating.enable_attr.attr.mode = 0644;
        if (device_create_file(hba->dev, &hba->clk_gating.enable_attr))
                dev_err(hba->dev, "Failed to create sysfs for clkgate_enable\n");
}

static void ufshcd_exit_clk_gating(struct ufs_hba *hba)
{
        if (!ufshcd_is_clkgating_allowed(hba))
                return;
        device_remove_file(hba->dev, &hba->clk_gating.delay_attr);
        device_remove_file(hba->dev, &hba->clk_gating.enable_attr);
        cancel_work_sync(&hba->clk_gating.ungate_work);
        cancel_delayed_work_sync(&hba->clk_gating.gate_work);
}

/* Must be called with host lock acquired */
static void ufshcd_clk_scaling_start_busy(struct ufs_hba *hba)
{
        bool queue_resume_work = false;

        if (!ufshcd_is_clkscaling_supported(hba))
                return;

        if (!hba->clk_scaling.active_reqs++)
                queue_resume_work = true;

        if (!hba->clk_scaling.is_allowed || hba->pm_op_in_progress)
                return;

        if (queue_resume_work)
                queue_work(hba->clk_scaling.workq,
                           &hba->clk_scaling.resume_work);

        if (!hba->clk_scaling.window_start_t) {
                hba->clk_scaling.window_start_t = jiffies;
                hba->clk_scaling.tot_busy_t = 0;
                hba->clk_scaling.is_busy_started = false;
        }

        if (!hba->clk_scaling.is_busy_started) {
                hba->clk_scaling.busy_start_t = ktime_get();
                hba->clk_scaling.is_busy_started = true;
        }
}

static void ufshcd_clk_scaling_update_busy(struct ufs_hba *hba)
{
        struct ufs_clk_scaling *scaling = &hba->clk_scaling;

        if (!ufshcd_is_clkscaling_supported(hba))
                return;

        if (!hba->outstanding_reqs && scaling->is_busy_started) {
                scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(),
                                        scaling->busy_start_t));
                scaling->busy_start_t = 0;
                scaling->is_busy_started = false;
        }
}
/**
 * ufshcd_send_command - Send SCSI or device management commands
 * @hba: per adapter instance
 * @task_tag: Task tag of the command
 */
static inline
void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
{
        hba->lrb[task_tag].issue_time_stamp = ktime_get();
        ufshcd_clk_scaling_start_busy(hba);
        __set_bit(task_tag, &hba->outstanding_reqs);
        ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL);
        /* Make sure that doorbell is committed immediately */
        wmb();
        ufshcd_add_command_trace(hba, task_tag, "send");
}

/**
 * ufshcd_copy_sense_data - Copy sense data in case of check condition
 * @lrb - pointer to local reference block
 */
static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
{
        int len;
        if (lrbp->sense_buffer &&
            ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) {
                int len_to_copy;

                len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len);
                len_to_copy = min_t(int, RESPONSE_UPIU_SENSE_DATA_LENGTH, len);

                memcpy(lrbp->sense_buffer,
                        lrbp->ucd_rsp_ptr->sr.sense_data,
                        min_t(int, len_to_copy, UFSHCD_REQ_SENSE_SIZE));
        }
}

/**
 * ufshcd_copy_query_response() - Copy the Query Response and the data
 * descriptor
 * @hba: per adapter instance
 * @lrb - pointer to local reference block
 */
static
int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
        struct ufs_query_res *query_res = &hba->dev_cmd.query.response;

        memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE);

        /* Get the descriptor */
        if (lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) {
                u8 *descp = (u8 *)lrbp->ucd_rsp_ptr +
                                GENERAL_UPIU_REQUEST_SIZE;
                u16 resp_len;
                u16 buf_len;

                /* data segment length */
                resp_len = be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2) &
                                                MASK_QUERY_DATA_SEG_LEN;
                buf_len = be16_to_cpu(
                                hba->dev_cmd.query.request.upiu_req.length);
                if (likely(buf_len >= resp_len)) {
                        memcpy(hba->dev_cmd.query.descriptor, descp, resp_len);
                } else {
                        dev_warn(hba->dev,
                                "%s: Response size is bigger than buffer",
                                __func__);
                        return -EINVAL;
                }
        }

        return 0;
}

/**
 * ufshcd_hba_capabilities - Read controller capabilities
 * @hba: per adapter instance
 */
static inline void ufshcd_hba_capabilities(struct ufs_hba *hba)
{
        hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES);

        /* nutrs and nutmrs are 0 based values */
        hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1;
        hba->nutmrs =
        ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1;
}

/**
 * ufshcd_ready_for_uic_cmd - Check if controller is ready
 *                            to accept UIC commands
 * @hba: per adapter instance
 * Return true on success, else false
 */
static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba)
{
        if (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY)
                return true;
        else
                return false;
}

/**
 * ufshcd_get_upmcrs - Get the power mode change request status
 * @hba: Pointer to adapter instance
 *
 * This function gets the UPMCRS field of HCS register
 * Returns value of UPMCRS field
 */
static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
{
        return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7;
}

/**
 * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
 * @hba: per adapter instance
 * @uic_cmd: UIC command
 *
 * Mutex must be held.
 */
static inline void
ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
{
        WARN_ON(hba->active_uic_cmd);

        hba->active_uic_cmd = uic_cmd;

        /* Write Args */
        ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1);
        ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2);
        ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3);

        /* Write UIC Cmd */
        ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK,
                      REG_UIC_COMMAND);
}

/**
 * ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command
 * @hba: per adapter instance
 * @uic_command: UIC command
 *
 * Must be called with mutex held.
 * Returns 0 only if success.
 */
static int
ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
{
        int ret;
        unsigned long flags;

        if (wait_for_completion_timeout(&uic_cmd->done,
                                        msecs_to_jiffies(UIC_CMD_TIMEOUT)))
                ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
        else
                ret = -ETIMEDOUT;

        spin_lock_irqsave(hba->host->host_lock, flags);
        hba->active_uic_cmd = NULL;
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        return ret;
}

/**
 * __ufshcd_send_uic_cmd - Send UIC commands and retrieve the result
 * @hba: per adapter instance
 * @uic_cmd: UIC command
 * @completion: initialize the completion only if this is set to true
 *
 * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called
 * with mutex held and host_lock locked.
 * Returns 0 only if success.
 */
static int
__ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd,
                      bool completion)
{
        if (!ufshcd_ready_for_uic_cmd(hba)) {
                dev_err(hba->dev,
                        "Controller not ready to accept UIC commands\n");
                return -EIO;
        }

        if (completion)
                init_completion(&uic_cmd->done);

        ufshcd_dispatch_uic_cmd(hba, uic_cmd);

        return 0;
}

/**
 * ufshcd_send_uic_cmd - Send UIC commands and retrieve the result
 * @hba: per adapter instance
 * @uic_cmd: UIC command
 *
 * Returns 0 only if success.
 */
static int
ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
{
        int ret;
        unsigned long flags;

        ufshcd_hold(hba, false);
        mutex_lock(&hba->uic_cmd_mutex);
        ufshcd_add_delay_before_dme_cmd(hba);

        spin_lock_irqsave(hba->host->host_lock, flags);
        ret = __ufshcd_send_uic_cmd(hba, uic_cmd, true);
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        if (!ret)
                ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd);

        mutex_unlock(&hba->uic_cmd_mutex);

        ufshcd_release(hba);
        return ret;
}

/**
 * ufshcd_map_sg - Map scatter-gather list to prdt
 * @lrbp - pointer to local reference block
 *
 * Returns 0 in case of success, non-zero value in case of failure
 */
static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
        struct ufshcd_sg_entry *prd_table;
        struct scatterlist *sg;
        struct scsi_cmnd *cmd;
        int sg_segments;
        int i;

        cmd = lrbp->cmd;
        sg_segments = scsi_dma_map(cmd);
        if (sg_segments < 0)
                return sg_segments;

        if (sg_segments) {
                if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN)
                        lrbp->utr_descriptor_ptr->prd_table_length =
                                cpu_to_le16((u16)(sg_segments *
                                        sizeof(struct ufshcd_sg_entry)));
                else
                        lrbp->utr_descriptor_ptr->prd_table_length =
                                cpu_to_le16((u16) (sg_segments));

                prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;

                scsi_for_each_sg(cmd, sg, sg_segments, i) {
                        prd_table[i].size  =
                                cpu_to_le32(((u32) sg_dma_len(sg))-1);
                        prd_table[i].base_addr =
                                cpu_to_le32(lower_32_bits(sg->dma_address));
                        prd_table[i].upper_addr =
                                cpu_to_le32(upper_32_bits(sg->dma_address));
                        prd_table[i].reserved = 0;
                }
        } else {
                lrbp->utr_descriptor_ptr->prd_table_length = 0;
        }

        return 0;
}

/**
 * ufshcd_enable_intr - enable interrupts
 * @hba: per adapter instance
 * @intrs: interrupt bits
 */
static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs)
{
        u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE);

        if (hba->ufs_version == UFSHCI_VERSION_10) {
                u32 rw;
                rw = set & INTERRUPT_MASK_RW_VER_10;
                set = rw | ((set ^ intrs) & intrs);
        } else {
                set |= intrs;
        }

        ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE);
}

/**
 * ufshcd_disable_intr - disable interrupts
 * @hba: per adapter instance
 * @intrs: interrupt bits
 */
static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs)
{
        u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE);

        if (hba->ufs_version == UFSHCI_VERSION_10) {
                u32 rw;
                rw = (set & INTERRUPT_MASK_RW_VER_10) &
                        ~(intrs & INTERRUPT_MASK_RW_VER_10);
                set = rw | ((set & intrs) & ~INTERRUPT_MASK_RW_VER_10);

        } else {
                set &= ~intrs;
        }

        ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE);
}

/**
 * ufshcd_prepare_req_desc_hdr() - Fills the requests header
 * descriptor according to request
 * @lrbp: pointer to local reference block
 * @upiu_flags: flags required in the header
 * @cmd_dir: requests data direction
 */
static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
                        u32 *upiu_flags, enum dma_data_direction cmd_dir)
{
        struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr;
        u32 data_direction;
        u32 dword_0;

        if (cmd_dir == DMA_FROM_DEVICE) {
                data_direction = UTP_DEVICE_TO_HOST;
                *upiu_flags = UPIU_CMD_FLAGS_READ;
        } else if (cmd_dir == DMA_TO_DEVICE) {
                data_direction = UTP_HOST_TO_DEVICE;
                *upiu_flags = UPIU_CMD_FLAGS_WRITE;
        } else {
                data_direction = UTP_NO_DATA_TRANSFER;
                *upiu_flags = UPIU_CMD_FLAGS_NONE;
        }

        dword_0 = data_direction | (lrbp->command_type
                                << UPIU_COMMAND_TYPE_OFFSET);
        if (lrbp->intr_cmd)
                dword_0 |= UTP_REQ_DESC_INT_CMD;

        /* Transfer request descriptor header fields */
        req_desc->header.dword_0 = cpu_to_le32(dword_0);
        /* dword_1 is reserved, hence it is set to 0 */
        req_desc->header.dword_1 = 0;
        /*
         * assigning invalid value for command status. Controller
         * updates OCS on command completion, with the command
         * status
         */
        req_desc->header.dword_2 =
                cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
        /* dword_3 is reserved, hence it is set to 0 */
        req_desc->header.dword_3 = 0;

        req_desc->prd_table_length = 0;
}

/**
 * ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc,
 * for scsi commands
 * @lrbp - local reference block pointer
 * @upiu_flags - flags
 */
static
void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufshcd_lrb *lrbp, u32 upiu_flags)
{
        struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr;
        unsigned short cdb_len;

        /* command descriptor fields */
        ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD(
                                UPIU_TRANSACTION_COMMAND, upiu_flags,
                                lrbp->lun, lrbp->task_tag);
        ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD(
                                UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0);

        /* Total EHS length and Data segment length will be zero */
        ucd_req_ptr->header.dword_2 = 0;

        ucd_req_ptr->sc.exp_data_transfer_len =
                cpu_to_be32(lrbp->cmd->sdb.length);

        cdb_len = min_t(unsigned short, lrbp->cmd->cmd_len, MAX_CDB_SIZE);
        memset(ucd_req_ptr->sc.cdb, 0, MAX_CDB_SIZE);
        memcpy(ucd_req_ptr->sc.cdb, lrbp->cmd->cmnd, cdb_len);

        memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp));
}

/**
 * ufshcd_prepare_utp_query_req_upiu() - fills the utp_transfer_req_desc,
 * for query requsts
 * @hba: UFS hba
 * @lrbp: local reference block pointer
 * @upiu_flags: flags
 */
static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba,
                                struct ufshcd_lrb *lrbp, u32 upiu_flags)
{
        struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr;
        struct ufs_query *query = &hba->dev_cmd.query;
        u16 len = be16_to_cpu(query->request.upiu_req.length);
        u8 *descp = (u8 *)lrbp->ucd_req_ptr + GENERAL_UPIU_REQUEST_SIZE;

        /* Query request header */
        ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD(
                        UPIU_TRANSACTION_QUERY_REQ, upiu_flags,
                        lrbp->lun, lrbp->task_tag);
        ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD(
                        0, query->request.query_func, 0, 0);

        /* Data segment length only need for WRITE_DESC */
        if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC)
                ucd_req_ptr->header.dword_2 =
                        UPIU_HEADER_DWORD(0, 0, (len >> 8), (u8)len);
        else
                ucd_req_ptr->header.dword_2 = 0;

        /* Copy the Query Request buffer as is */
        memcpy(&ucd_req_ptr->qr, &query->request.upiu_req,
                        QUERY_OSF_SIZE);

        /* Copy the Descriptor */
        if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC)
                memcpy(descp, query->descriptor, len);

        memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp));
}

static inline void ufshcd_prepare_utp_nop_upiu(struct ufshcd_lrb *lrbp)
{
        struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr;

        memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req));

        /* command descriptor fields */
        ucd_req_ptr->header.dword_0 =
                UPIU_HEADER_DWORD(
                        UPIU_TRANSACTION_NOP_OUT, 0, 0, lrbp->task_tag);
        /* clear rest of the fields of basic header */
        ucd_req_ptr->header.dword_1 = 0;
        ucd_req_ptr->header.dword_2 = 0;

        memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp));
}

/**
 * ufshcd_comp_devman_upiu - UFS Protocol Information Unit(UPIU)
 *                           for Device Management Purposes
 * @hba - per adapter instance
 * @lrb - pointer to local reference block
 */
static int ufshcd_comp_devman_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
        u32 upiu_flags;
        int ret = 0;

        if (hba->ufs_version == UFSHCI_VERSION_20)
                lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
        else
                lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;

        ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
        if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY)
                ufshcd_prepare_utp_query_req_upiu(hba, lrbp, upiu_flags);
        else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP)
                ufshcd_prepare_utp_nop_upiu(lrbp);
        else
                ret = -EINVAL;

        return ret;
}

/**
 * ufshcd_comp_scsi_upiu - UFS Protocol Information Unit(UPIU)
 *                         for SCSI Purposes
 * @hba - per adapter instance
 * @lrb - pointer to local reference block
 */
static int ufshcd_comp_scsi_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
        u32 upiu_flags;
        int ret = 0;

        if (hba->ufs_version == UFSHCI_VERSION_20)
                lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
        else
                lrbp->command_type = UTP_CMD_TYPE_SCSI;

        if (likely(lrbp->cmd)) {
                ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
                                                lrbp->cmd->sc_data_direction);
                ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
        } else {
                ret = -EINVAL;
        }

        return ret;
}

/*
 * ufshcd_scsi_to_upiu_lun - maps scsi LUN to UPIU LUN
 * @scsi_lun: scsi LUN id
 *
 * Returns UPIU LUN id
 */
static inline u8 ufshcd_scsi_to_upiu_lun(unsigned int scsi_lun)
{
        if (scsi_is_wlun(scsi_lun))
                return (scsi_lun & UFS_UPIU_MAX_UNIT_NUM_ID)
                        | UFS_UPIU_WLUN_ID;
        else
                return scsi_lun & UFS_UPIU_MAX_UNIT_NUM_ID;
}

/**
 * ufshcd_upiu_wlun_to_scsi_wlun - maps UPIU W-LUN id to SCSI W-LUN ID
 * @scsi_lun: UPIU W-LUN id
 *
 * Returns SCSI W-LUN id
 */
static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
{
        return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE;
}

/**
 * ufshcd_queuecommand - main entry point for SCSI requests
 * @cmd: command from SCSI Midlayer
 * @done: call back function
 *
 * Returns 0 for success, non-zero in case of failure
 */
static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
        struct ufshcd_lrb *lrbp;
        struct ufs_hba *hba;
        unsigned long flags;
        int tag;
        int err = 0;

        hba = shost_priv(host);

        tag = cmd->request->tag;
        if (!ufshcd_valid_tag(hba, tag)) {
                dev_err(hba->dev,
                        "%s: invalid command tag %d: cmd=0x%p, cmd->request=0x%p",
                        __func__, tag, cmd, cmd->request);
                BUG();
        }

        if (!down_read_trylock(&hba->clk_scaling_lock))
                return SCSI_MLQUEUE_HOST_BUSY;

        spin_lock_irqsave(hba->host->host_lock, flags);
        switch (hba->ufshcd_state) {
        case UFSHCD_STATE_OPERATIONAL:
                break;
        case UFSHCD_STATE_EH_SCHEDULED:
        case UFSHCD_STATE_RESET:
                err = SCSI_MLQUEUE_HOST_BUSY;
                goto out_unlock;
        case UFSHCD_STATE_ERROR:
                set_host_byte(cmd, DID_ERROR);
                cmd->scsi_done(cmd);
                goto out_unlock;
        default:
                dev_WARN_ONCE(hba->dev, 1, "%s: invalid state %d\n",
                                __func__, hba->ufshcd_state);
                set_host_byte(cmd, DID_BAD_TARGET);
                cmd->scsi_done(cmd);
                goto out_unlock;
        }

        /* if error handling is in progress, don't issue commands */
        if (ufshcd_eh_in_progress(hba)) {
                set_host_byte(cmd, DID_ERROR);
                cmd->scsi_done(cmd);
                goto out_unlock;
        }
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        hba->req_abort_count = 0;

        /* acquire the tag to make sure device cmds don't use it */
        if (test_and_set_bit_lock(tag, &hba->lrb_in_use)) {
                /*
                 * Dev manage command in progress, requeue the command.
                 * Requeuing the command helps in cases where the request *may*
                 * find different tag instead of waiting for dev manage command
                 * completion.
                 */
                err = SCSI_MLQUEUE_HOST_BUSY;
                goto out;
        }

        err = ufshcd_hold(hba, true);
        if (err) {
                err = SCSI_MLQUEUE_HOST_BUSY;
                clear_bit_unlock(tag, &hba->lrb_in_use);
                goto out;
        }
        WARN_ON(hba->clk_gating.state != CLKS_ON);

        lrbp = &hba->lrb[tag];

        WARN_ON(lrbp->cmd);
        lrbp->cmd = cmd;
        lrbp->sense_bufflen = UFSHCD_REQ_SENSE_SIZE;
        lrbp->sense_buffer = cmd->sense_buffer;
        lrbp->task_tag = tag;
        lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
        lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
        lrbp->req_abort_skip = false;

        ufshcd_comp_scsi_upiu(hba, lrbp);

        err = ufshcd_map_sg(hba, lrbp);
        if (err) {
                lrbp->cmd = NULL;
                clear_bit_unlock(tag, &hba->lrb_in_use);
                goto out;
        }
        /* Make sure descriptors are ready before ringing the doorbell */
        wmb();

        /* issue command to the controller */
        spin_lock_irqsave(hba->host->host_lock, flags);
        ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
        ufshcd_send_command(hba, tag);
out_unlock:
        spin_unlock_irqrestore(hba->host->host_lock, flags);
out:
        up_read(&hba->clk_scaling_lock);
        return err;
}

static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
                struct ufshcd_lrb *lrbp, enum dev_cmd_type cmd_type, int tag)
{
        lrbp->cmd = NULL;
        lrbp->sense_bufflen = 0;
        lrbp->sense_buffer = NULL;
        lrbp->task_tag = tag;
        lrbp->lun = 0; /* device management cmd is not specific to any LUN */
        lrbp->intr_cmd = true; /* No interrupt aggregation */
        hba->dev_cmd.type = cmd_type;

        return ufshcd_comp_devman_upiu(hba, lrbp);
}

static int
ufshcd_clear_cmd(struct ufs_hba *hba, int tag)
{
        int err = 0;
        unsigned long flags;
        u32 mask = 1 << tag;

        /* clear outstanding transaction before retry */
        spin_lock_irqsave(hba->host->host_lock, flags);
        ufshcd_utrl_clear(hba, tag);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        /*
         * wait for for h/w to clear corresponding bit in door-bell.
         * max. wait is 1 sec.
         */
        err = ufshcd_wait_for_register(hba,
                        REG_UTP_TRANSFER_REQ_DOOR_BELL,
                        mask, ~mask, 1000, 1000, true);

        return err;
}

static int
ufshcd_check_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
        struct ufs_query_res *query_res = &hba->dev_cmd.query.response;

        /* Get the UPIU response */
        query_res->response = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr) >>
                                UPIU_RSP_CODE_OFFSET;
        return query_res->response;
}

/**
 * ufshcd_dev_cmd_completion() - handles device management command responses
 * @hba: per adapter instance
 * @lrbp: pointer to local reference block
 */
static int
ufshcd_dev_cmd_completion(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
        int resp;
        int err = 0;

        hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0);
        resp = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr);

        switch (resp) {
        case UPIU_TRANSACTION_NOP_IN:
                if (hba->dev_cmd.type != DEV_CMD_TYPE_NOP) {
                        err = -EINVAL;
                        dev_err(hba->dev, "%s: unexpected response %x\n",
                                        __func__, resp);
                }
                break;
        case UPIU_TRANSACTION_QUERY_RSP:
                err = ufshcd_check_query_response(hba, lrbp);
                if (!err)
                        err = ufshcd_copy_query_response(hba, lrbp);
                break;
        case UPIU_TRANSACTION_REJECT_UPIU:
                /* TODO: handle Reject UPIU Response */
                err = -EPERM;
                dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n",
                                __func__);
                break;
        default:
                err = -EINVAL;
                dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n",
                                __func__, resp);
                break;
        }

        return err;
}

static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
                struct ufshcd_lrb *lrbp, int max_timeout)
{
        int err = 0;
        unsigned long time_left;
        unsigned long flags;

        time_left = wait_for_completion_timeout(hba->dev_cmd.complete,
                        msecs_to_jiffies(max_timeout));

        /* Make sure descriptors are ready before ringing the doorbell */
        wmb();
        spin_lock_irqsave(hba->host->host_lock, flags);
        hba->dev_cmd.complete = NULL;
        if (likely(time_left)) {
                err = ufshcd_get_tr_ocs(lrbp);
                if (!err)
                        err = ufshcd_dev_cmd_completion(hba, lrbp);
        }
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        if (!time_left) {
                err = -ETIMEDOUT;
                dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n",
                        __func__, lrbp->task_tag);
                if (!ufshcd_clear_cmd(hba, lrbp->task_tag))
                        /* successfully cleared the command, retry if needed */
                        err = -EAGAIN;
                /*
                 * in case of an error, after clearing the doorbell,
                 * we also need to clear the outstanding_request
                 * field in hba
                 */
                ufshcd_outstanding_req_clear(hba, lrbp->task_tag);
        }

        return err;
}

/**
 * ufshcd_get_dev_cmd_tag - Get device management command tag
 * @hba: per-adapter instance
 * @tag: pointer to variable with available slot value
 *
 * Get a free slot and lock it until device management command
 * completes.
 *
 * Returns false if free slot is unavailable for locking, else
 * return true with tag value in @tag.
 */
static bool ufshcd_get_dev_cmd_tag(struct ufs_hba *hba, int *tag_out)
{
        int tag;
        bool ret = false;
        unsigned long tmp;

        if (!tag_out)
                goto out;

        do {
                tmp = ~hba->lrb_in_use;
                tag = find_last_bit(&tmp, hba->nutrs);
                if (tag >= hba->nutrs)
                        goto out;
        } while (test_and_set_bit_lock(tag, &hba->lrb_in_use));

        *tag_out = tag;
        ret = true;
out:
        return ret;
}

static inline void ufshcd_put_dev_cmd_tag(struct ufs_hba *hba, int tag)
{
        clear_bit_unlock(tag, &hba->lrb_in_use);
}

/**
 * ufshcd_exec_dev_cmd - API for sending device management requests
 * @hba - UFS hba
 * @cmd_type - specifies the type (NOP, Query...)
 * @timeout - time in seconds
 *
 * NOTE: Since there is only one available tag for device management commands,
 * it is expected you hold the hba->dev_cmd.lock mutex.
 */
static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
                enum dev_cmd_type cmd_type, int timeout)
{
        struct ufshcd_lrb *lrbp;
        int err;
        int tag;
        struct completion wait;
        unsigned long flags;

        down_read(&hba->clk_scaling_lock);

        /*
         * Get free slot, sleep if slots are unavailable.
         * Even though we use wait_event() which sleeps indefinitely,
         * the maximum wait time is bounded by SCSI request timeout.
         */
        wait_event(hba->dev_cmd.tag_wq, ufshcd_get_dev_cmd_tag(hba, &tag));

        init_completion(&wait);
        lrbp = &hba->lrb[tag];
        WARN_ON(lrbp->cmd);
        err = ufshcd_compose_dev_cmd(hba, lrbp, cmd_type, tag);
        if (unlikely(err))
                goto out_put_tag;

        hba->dev_cmd.complete = &wait;

        /* Make sure descriptors are ready before ringing the doorbell */
        wmb();
        spin_lock_irqsave(hba->host->host_lock, flags);
        ufshcd_vops_setup_xfer_req(hba, tag, (lrbp->cmd ? true : false));
        ufshcd_send_command(hba, tag);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout);

out_put_tag:
        ufshcd_put_dev_cmd_tag(hba, tag);
        wake_up(&hba->dev_cmd.tag_wq);
        up_read(&hba->clk_scaling_lock);
        return err;
}

/**
 * ufshcd_init_query() - init the query response and request parameters
 * @hba: per-adapter instance
 * @request: address of the request pointer to be initialized
 * @response: address of the response pointer to be initialized
 * @opcode: operation to perform
 * @idn: flag idn to access
 * @index: LU number to access
 * @selector: query/flag/descriptor further identification
 */
static inline void ufshcd_init_query(struct ufs_hba *hba,
                struct ufs_query_req **request, struct ufs_query_res **response,
                enum query_opcode opcode, u8 idn, u8 index, u8 selector)
{
        *request = &hba->dev_cmd.query.request;
        *response = &hba->dev_cmd.query.response;
        memset(*request, 0, sizeof(struct ufs_query_req));
        memset(*response, 0, sizeof(struct ufs_query_res));
        (*request)->upiu_req.opcode = opcode;
        (*request)->upiu_req.idn = idn;
        (*request)->upiu_req.index = index;
        (*request)->upiu_req.selector = selector;
}

static int ufshcd_query_flag_retry(struct ufs_hba *hba,
        enum query_opcode opcode, enum flag_idn idn, bool *flag_res)
{
        int ret;
        int retries;

        for (retries = 0; retries < QUERY_REQ_RETRIES; retries++) {
                ret = ufshcd_query_flag(hba, opcode, idn, flag_res);
                if (ret)
                        dev_dbg(hba->dev,
                                "%s: failed with error %d, retries %d\n",
                                __func__, ret, retries);
                else
                        break;
        }

        if (ret)
                dev_err(hba->dev,
                        "%s: query attribute, opcode %d, idn %d, failed with error %d after %d retires\n",
                        __func__, opcode, idn, ret, retries);
        return ret;
}

/**
 * ufshcd_query_flag() - API function for sending flag query requests
 * hba: per-adapter instance
 * query_opcode: flag query to perform
 * idn: flag idn to access
 * flag_res: the flag value after the query request completes
 *
 * Returns 0 for success, non-zero in case of failure
 */
int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
                        enum flag_idn idn, bool *flag_res)
{
        struct ufs_query_req *request = NULL;
        struct ufs_query_res *response = NULL;
        int err, index = 0, selector = 0;
        int timeout = QUERY_REQ_TIMEOUT;

        BUG_ON(!hba);

        ufshcd_hold(hba, false);
        mutex_lock(&hba->dev_cmd.lock);
        ufshcd_init_query(hba, &request, &response, opcode, idn, index,
                        selector);

        switch (opcode) {
        case UPIU_QUERY_OPCODE_SET_FLAG:
        case UPIU_QUERY_OPCODE_CLEAR_FLAG:
        case UPIU_QUERY_OPCODE_TOGGLE_FLAG:
                request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST;
                break;
        case UPIU_QUERY_OPCODE_READ_FLAG:
                request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST;
                if (!flag_res) {
                        /* No dummy reads */
                        dev_err(hba->dev, "%s: Invalid argument for read request\n",
                                        __func__);
                        err = -EINVAL;
                        goto out_unlock;
                }
                break;
        default:
                dev_err(hba->dev,
                        "%s: Expected query flag opcode but got = %d\n",
                        __func__, opcode);
                err = -EINVAL;
                goto out_unlock;
        }

        err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, timeout);

        if (err) {
                dev_err(hba->dev,
                        "%s: Sending flag query for idn %d failed, err = %d\n",
                        __func__, idn, err);
                goto out_unlock;
        }

        if (flag_res)
                *flag_res = (be32_to_cpu(response->upiu_res.value) &
                                MASK_QUERY_UPIU_FLAG_LOC) & 0x1;

out_unlock:
        mutex_unlock(&hba->dev_cmd.lock);
        ufshcd_release(hba);
        return err;
}

/**
 * ufshcd_query_attr - API function for sending attribute requests
 * hba: per-adapter instance
 * opcode: attribute opcode
 * idn: attribute idn to access
 * index: index field
 * selector: selector field
 * attr_val: the attribute value after the query request completes
 *
 * Returns 0 for success, non-zero in case of failure
*/
static int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
                        enum attr_idn idn, u8 index, u8 selector, u32 *attr_val)
{
        struct ufs_query_req *request = NULL;
        struct ufs_query_res *response = NULL;
        int err;

        BUG_ON(!hba);

        ufshcd_hold(hba, false);
        if (!attr_val) {
                dev_err(hba->dev, "%s: attribute value required for opcode 0x%x\n",
                                __func__, opcode);
                err = -EINVAL;
                goto out;
        }

        mutex_lock(&hba->dev_cmd.lock);
        ufshcd_init_query(hba, &request, &response, opcode, idn, index,
                        selector);

        switch (opcode) {
        case UPIU_QUERY_OPCODE_WRITE_ATTR:
                request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST;
                request->upiu_req.value = cpu_to_be32(*attr_val);
                break;
        case UPIU_QUERY_OPCODE_READ_ATTR:
                request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST;
                break;
        default:
                dev_err(hba->dev, "%s: Expected query attr opcode but got = 0x%.2x\n",
                                __func__, opcode);
                err = -EINVAL;
                goto out_unlock;
        }

        err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT);

        if (err) {
                dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n",
                                __func__, opcode, idn, index, err);
                goto out_unlock;
        }

        *attr_val = be32_to_cpu(response->upiu_res.value);

out_unlock:
        mutex_unlock(&hba->dev_cmd.lock);
out:
        ufshcd_release(hba);
        return err;
}

/**
 * ufshcd_query_attr_retry() - API function for sending query
 * attribute with retries
 * @hba: per-adapter instance
 * @opcode: attribute opcode
 * @idn: attribute idn to access
 * @index: index field
 * @selector: selector field
 * @attr_val: the attribute value after the query request
 * completes
 *
 * Returns 0 for success, non-zero in case of failure
*/
static int ufshcd_query_attr_retry(struct ufs_hba *hba,
        enum query_opcode opcode, enum attr_idn idn, u8 index, u8 selector,
        u32 *attr_val)
{
        int ret = 0;
        u32 retries;

         for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) {
                ret = ufshcd_query_attr(hba, opcode, idn, index,
                                                selector, attr_val);
                if (ret)
                        dev_dbg(hba->dev, "%s: failed with error %d, retries %d\n",
                                __func__, ret, retries);
                else
                        break;
        }

        if (ret)
                dev_err(hba->dev,
                        "%s: query attribute, idn %d, failed with error %d after %d retires\n",
                        __func__, idn, ret, QUERY_REQ_RETRIES);
        return ret;
}

static int __ufshcd_query_descriptor(struct ufs_hba *hba,
                        enum query_opcode opcode, enum desc_idn idn, u8 index,
                        u8 selector, u8 *desc_buf, int *buf_len)
{
        struct ufs_query_req *request = NULL;
        struct ufs_query_res *response = NULL;
        int err;

        BUG_ON(!hba);

        ufshcd_hold(hba, false);
        if (!desc_buf) {
                dev_err(hba->dev, "%s: descriptor buffer required for opcode 0x%x\n",
                                __func__, opcode);
                err = -EINVAL;
                goto out;
        }

        if (*buf_len < QUERY_DESC_MIN_SIZE || *buf_len > QUERY_DESC_MAX_SIZE) {
                dev_err(hba->dev, "%s: descriptor buffer size (%d) is out of range\n",
                                __func__, *buf_len);
                err = -EINVAL;
                goto out;
        }

        mutex_lock(&hba->dev_cmd.lock);
        ufshcd_init_query(hba, &request, &response, opcode, idn, index,
                        selector);
        hba->dev_cmd.query.descriptor = desc_buf;
        request->upiu_req.length = cpu_to_be16(*buf_len);

        switch (opcode) {
        case UPIU_QUERY_OPCODE_WRITE_DESC:
                request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST;
                break;
        case UPIU_QUERY_OPCODE_READ_DESC:
                request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST;
                break;
        default:
                dev_err(hba->dev,
                                "%s: Expected query descriptor opcode but got = 0x%.2x\n",
                                __func__, opcode);
                err = -EINVAL;
                goto out_unlock;
        }

        err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT);

        if (err) {
                dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n",
                                __func__, opcode, idn, index, err);
                goto out_unlock;
        }

        hba->dev_cmd.query.descriptor = NULL;
        *buf_len = be16_to_cpu(response->upiu_res.length);

out_unlock:
        mutex_unlock(&hba->dev_cmd.lock);
out:
        ufshcd_release(hba);
        return err;
}

/**
 * ufshcd_query_descriptor_retry - API function for sending descriptor
 * requests
 * hba: per-adapter instance
 * opcode: attribute opcode
 * idn: attribute idn to access
 * index: index field
 * selector: selector field
 * desc_buf: the buffer that contains the descriptor
 * buf_len: length parameter passed to the device
 *
 * Returns 0 for success, non-zero in case of failure.
 * The buf_len parameter will contain, on return, the length parameter
 * received on the response.
 */
static int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
                                         enum query_opcode opcode,
                                         enum desc_idn idn, u8 index,
                                         u8 selector,
                                         u8 *desc_buf, int *buf_len)
{
        int err;
        int retries;

        for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) {
                err = __ufshcd_query_descriptor(hba, opcode, idn, index,
                                                selector, desc_buf, buf_len);
                if (!err || err == -EINVAL)
                        break;
        }

        return err;
}

/**
 * ufshcd_read_desc_length - read the specified descriptor length from header
 * @hba: Pointer to adapter instance
 * @desc_id: descriptor idn value
 * @desc_index: descriptor index
 * @desc_length: pointer to variable to read the length of descriptor
 *
 * Return 0 in case of success, non-zero otherwise
 */
static int ufshcd_read_desc_length(struct ufs_hba *hba,
        enum desc_idn desc_id,
        int desc_index,
        int *desc_length)
{
        int ret;
        u8 header[QUERY_DESC_HDR_SIZE];
        int header_len = QUERY_DESC_HDR_SIZE;

        if (desc_id >= QUERY_DESC_IDN_MAX)
                return -EINVAL;

        ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC,
                                        desc_id, desc_index, 0, header,
                                        &header_len);

        if (ret) {
                dev_err(hba->dev, "%s: Failed to get descriptor header id %d",
                        __func__, desc_id);
                return ret;
        } else if (desc_id != header[QUERY_DESC_DESC_TYPE_OFFSET]) {
                dev_warn(hba->dev, "%s: descriptor header id %d and desc_id %d mismatch",
                        __func__, header[QUERY_DESC_DESC_TYPE_OFFSET],
                        desc_id);
                ret = -EINVAL;
        }

        *desc_length = header[QUERY_DESC_LENGTH_OFFSET];
        return ret;

}

/**
 * ufshcd_map_desc_id_to_length - map descriptor IDN to its length
 * @hba: Pointer to adapter instance
 * @desc_id: descriptor idn value
 * @desc_len: mapped desc length (out)
 *
 * Return 0 in case of success, non-zero otherwise
 */
int ufshcd_map_desc_id_to_length(struct ufs_hba *hba,
        enum desc_idn desc_id, int *desc_len)
{
        switch (desc_id) {
        case QUERY_DESC_IDN_DEVICE:
                *desc_len = hba->desc_size.dev_desc;
                break;
        case QUERY_DESC_IDN_POWER:
                *desc_len = hba->desc_size.pwr_desc;
                break;
        case QUERY_DESC_IDN_GEOMETRY:
                *desc_len = hba->desc_size.geom_desc;
                break;
        case QUERY_DESC_IDN_CONFIGURATION:
                *desc_len = hba->desc_size.conf_desc;
                break;
        case QUERY_DESC_IDN_UNIT:
                *desc_len = hba->desc_size.unit_desc;
                break;
        case QUERY_DESC_IDN_INTERCONNECT:
                *desc_len = hba->desc_size.interc_desc;
                break;
        case QUERY_DESC_IDN_STRING:
                *desc_len = QUERY_DESC_MAX_SIZE;
                break;
        case QUERY_DESC_IDN_RFU_0:
        case QUERY_DESC_IDN_RFU_1:
                *desc_len = 0;
                break;
        default:
                *desc_len = 0;
                return -EINVAL;
        }
        return 0;
}
EXPORT_SYMBOL(ufshcd_map_desc_id_to_length);

/**
 * ufshcd_read_desc_param - read the specified descriptor parameter
 * @hba: Pointer to adapter instance
 * @desc_id: descriptor idn value
 * @desc_index: descriptor index
 * @param_offset: offset of the parameter to read
 * @param_read_buf: pointer to buffer where parameter would be read
 * @param_size: sizeof(param_read_buf)
 *
 * Return 0 in case of success, non-zero otherwise
 */
static int ufshcd_read_desc_param(struct ufs_hba *hba,
                                  enum desc_idn desc_id,
                                  int desc_index,
                                  u8 param_offset,
                                  u8 *param_read_buf,
                                  u8 param_size)
{
        int ret;
        u8 *desc_buf;
        int buff_len;
        bool is_kmalloc = true;

        /* Safety check */
        if (desc_id >= QUERY_DESC_IDN_MAX || !param_size)
                return -EINVAL;

        /* Get the max length of descriptor from structure filled up at probe
         * time.
         */
        ret = ufshcd_map_desc_id_to_length(hba, desc_id, &buff_len);

        /* Sanity checks */
        if (ret || !buff_len) {
                dev_err(hba->dev, "%s: Failed to get full descriptor length",
                        __func__);
                return ret;
        }

        /* Check whether we need temp memory */
        if (param_offset != 0 || param_size < buff_len) {
                desc_buf = kmalloc(buff_len, GFP_KERNEL);
                if (!desc_buf)
                        return -ENOMEM;
        } else {
                desc_buf = param_read_buf;
                is_kmalloc = false;
        }

        /* Request for full descriptor */
        ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC,
                                        desc_id, desc_index, 0,
                                        desc_buf, &buff_len);

        if (ret) {
                dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d",
                        __func__, desc_id, desc_index, param_offset, ret);
                goto out;
        }

        /* Sanity check */
        if (desc_buf[QUERY_DESC_DESC_TYPE_OFFSET] != desc_id) {
                dev_err(hba->dev, "%s: invalid desc_id %d in descriptor header",
                        __func__, desc_buf[QUERY_DESC_DESC_TYPE_OFFSET]);
                ret = -EINVAL;
                goto out;
        }

        /* Check wherher we will not copy more data, than available */
        if (is_kmalloc && param_size > buff_len)
                param_size = buff_len;

        if (is_kmalloc)
                memcpy(param_read_buf, &desc_buf[param_offset], param_size);
out:
        if (is_kmalloc)
                kfree(desc_buf);
        return ret;
}

static inline int ufshcd_read_desc(struct ufs_hba *hba,
                                   enum desc_idn desc_id,
                                   int desc_index,
                                   u8 *buf,
                                   u32 size)
{
        return ufshcd_read_desc_param(hba, desc_id, desc_index, 0, buf, size);
}

static inline int ufshcd_read_power_desc(struct ufs_hba *hba,
                                         u8 *buf,
                                         u32 size)
{
        return ufshcd_read_desc(hba, QUERY_DESC_IDN_POWER, 0, buf, size);
}

static int ufshcd_read_device_desc(struct ufs_hba *hba, u8 *buf, u32 size)
{
        return ufshcd_read_desc(hba, QUERY_DESC_IDN_DEVICE, 0, buf, size);
}

/**
 * ufshcd_read_string_desc - read string descriptor
 * @hba: pointer to adapter instance
 * @desc_index: descriptor index
 * @buf: pointer to buffer where descriptor would be read
 * @size: size of buf
 * @ascii: if true convert from unicode to ascii characters
 *
 * Return 0 in case of success, non-zero otherwise
 */
#define ASCII_STD true
static int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
                                   u8 *buf, u32 size, bool ascii)
{
        int err = 0;

        err = ufshcd_read_desc(hba,
                                QUERY_DESC_IDN_STRING, desc_index, buf, size);

        if (err) {
                dev_err(hba->dev, "%s: reading String Desc failed after %d retries. err = %d\n",
                        __func__, QUERY_REQ_RETRIES, err);
                goto out;
        }

        if (ascii) {
                int desc_len;
                int ascii_len;
                int i;
                char *buff_ascii;

                desc_len = buf[0];
                /* remove header and divide by 2 to move from UTF16 to UTF8 */
                ascii_len = (desc_len - QUERY_DESC_HDR_SIZE) / 2 + 1;
                if (size < ascii_len + QUERY_DESC_HDR_SIZE) {
                        dev_err(hba->dev, "%s: buffer allocated size is too small\n",
                                        __func__);
                        err = -ENOMEM;
                        goto out;
                }

                buff_ascii = kmalloc(ascii_len, GFP_KERNEL);
                if (!buff_ascii) {
                        err = -ENOMEM;
                        goto out;
                }

                /*
                 * the descriptor contains string in UTF16 format
                 * we need to convert to utf-8 so it can be displayed
                 */
                utf16s_to_utf8s((wchar_t *)&buf[QUERY_DESC_HDR_SIZE],
                                desc_len - QUERY_DESC_HDR_SIZE,
                                UTF16_BIG_ENDIAN, buff_ascii, ascii_len);

                /* replace non-printable or non-ASCII characters with spaces */
                for (i = 0; i < ascii_len; i++)
                        ufshcd_remove_non_printable(&buff_ascii[i]);

                memset(buf + QUERY_DESC_HDR_SIZE, 0,
                                size - QUERY_DESC_HDR_SIZE);
                memcpy(buf + QUERY_DESC_HDR_SIZE, buff_ascii, ascii_len);
                buf[QUERY_DESC_LENGTH_OFFSET] = ascii_len + QUERY_DESC_HDR_SIZE;
                kfree(buff_ascii);
        }
out:
        return err;
}

/**
 * ufshcd_read_unit_desc_param - read the specified unit descriptor parameter
 * @hba: Pointer to adapter instance
 * @lun: lun id
 * @param_offset: offset of the parameter to read
 * @param_read_buf: pointer to buffer where parameter would be read
 * @param_size: sizeof(param_read_buf)
 *
 * Return 0 in case of success, non-zero otherwise
 */
static inline int ufshcd_read_unit_desc_param(struct ufs_hba *hba,
                                              int lun,
                                              enum unit_desc_param param_offset,
                                              u8 *param_read_buf,
                                              u32 param_size)
{
        /*
         * Unit descriptors are only available for general purpose LUs (LUN id
         * from 0 to 7) and RPMB Well known LU.
         */
        if (lun != UFS_UPIU_RPMB_WLUN && (lun >= UFS_UPIU_MAX_GENERAL_LUN))
                return -EOPNOTSUPP;

        return ufshcd_read_desc_param(hba, QUERY_DESC_IDN_UNIT, lun,
                                      param_offset, param_read_buf, param_size);
}

/**
 * ufshcd_memory_alloc - allocate memory for host memory space data structures
 * @hba: per adapter instance
 *
 * 1. Allocate DMA memory for Command Descriptor array
 *      Each command descriptor consist of Command UPIU, Response UPIU and PRDT
 * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL).
 * 3. Allocate DMA memory for UTP Task Management Request Descriptor List
 *      (UTMRDL)
 * 4. Allocate memory for local reference block(lrb).
 *
 * Returns 0 for success, non-zero in case of failure
 */
static int ufshcd_memory_alloc(struct ufs_hba *hba)
{
        size_t utmrdl_size, utrdl_size, ucdl_size;

        /* Allocate memory for UTP command descriptors */
        ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
        hba->ucdl_base_addr = dmam_alloc_coherent(hba->dev,
                                                  ucdl_size,
                                                  &hba->ucdl_dma_addr,
                                                  GFP_KERNEL);

        /*
         * UFSHCI requires UTP command descriptor to be 128 byte aligned.
         * make sure hba->ucdl_dma_addr is aligned to PAGE_SIZE
         * if hba->ucdl_dma_addr is aligned to PAGE_SIZE, then it will
         * be aligned to 128 bytes as well
         */
        if (!hba->ucdl_base_addr ||
            WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) {
                dev_err(hba->dev,
                        "Command Descriptor Memory allocation failed\n");
                goto out;
        }

        /*
         * Allocate memory for UTP Transfer descriptors
         * UFSHCI requires 1024 byte alignment of UTRD
         */
        utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs);
        hba->utrdl_base_addr = dmam_alloc_coherent(hba->dev,
                                                   utrdl_size,
                                                   &hba->utrdl_dma_addr,
                                                   GFP_KERNEL);
        if (!hba->utrdl_base_addr ||
            WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) {
                dev_err(hba->dev,
                        "Transfer Descriptor Memory allocation failed\n");
                goto out;
        }

        /*
         * Allocate memory for UTP Task Management descriptors
         * UFSHCI requires 1024 byte alignment of UTMRD
         */
        utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
        hba->utmrdl_base_addr = dmam_alloc_coherent(hba->dev,
                                                    utmrdl_size,
                                                    &hba->utmrdl_dma_addr,
                                                    GFP_KERNEL);
        if (!hba->utmrdl_base_addr ||
            WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) {
                dev_err(hba->dev,
                "Task Management Descriptor Memory allocation failed\n");
                goto out;
        }

        /* Allocate memory for local reference block */
        hba->lrb = devm_kzalloc(hba->dev,
                                hba->nutrs * sizeof(struct ufshcd_lrb),
                                GFP_KERNEL);
        if (!hba->lrb) {
                dev_err(hba->dev, "LRB Memory allocation failed\n");
                goto out;
        }
        return 0;
out:
        return -ENOMEM;
}

/**
 * ufshcd_host_memory_configure - configure local reference block with
 *                              memory offsets
 * @hba: per adapter instance
 *
 * Configure Host memory space
 * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA
 * address.
 * 2. Update each UTRD with Response UPIU offset, Response UPIU length
 * and PRDT offset.
 * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT
 * into local reference block.
 */
static void ufshcd_host_memory_configure(struct ufs_hba *hba)
{
        struct utp_transfer_cmd_desc *cmd_descp;
        struct utp_transfer_req_desc *utrdlp;
        dma_addr_t cmd_desc_dma_addr;
        dma_addr_t cmd_desc_element_addr;
        u16 response_offset;
        u16 prdt_offset;
        int cmd_desc_size;
        int i;

        utrdlp = hba->utrdl_base_addr;
        cmd_descp = hba->ucdl_base_addr;

        response_offset =
                offsetof(struct utp_transfer_cmd_desc, response_upiu);
        prdt_offset =
                offsetof(struct utp_transfer_cmd_desc, prd_table);

        cmd_desc_size = sizeof(struct utp_transfer_cmd_desc);
        cmd_desc_dma_addr = hba->ucdl_dma_addr;

        for (i = 0; i < hba->nutrs; i++) {
                /* Configure UTRD with command descriptor base address */
                cmd_desc_element_addr =
                                (cmd_desc_dma_addr + (cmd_desc_size * i));
                utrdlp[i].command_desc_base_addr_lo =
                                cpu_to_le32(lower_32_bits(cmd_desc_element_addr));
                utrdlp[i].command_desc_base_addr_hi =
                                cpu_to_le32(upper_32_bits(cmd_desc_element_addr));

                /* Response upiu and prdt offset should be in double words */
                if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) {
                        utrdlp[i].response_upiu_offset =
                                cpu_to_le16(response_offset);
                        utrdlp[i].prd_table_offset =
                                cpu_to_le16(prdt_offset);
                        utrdlp[i].response_upiu_length =
                                cpu_to_le16(ALIGNED_UPIU_SIZE);
                } else {
                        utrdlp[i].response_upiu_offset =
                                cpu_to_le16((response_offset >> 2));
                        utrdlp[i].prd_table_offset =
                                cpu_to_le16((prdt_offset >> 2));
                        utrdlp[i].response_upiu_length =
                                cpu_to_le16(ALIGNED_UPIU_SIZE >> 2);
                }

                hba->lrb[i].utr_descriptor_ptr = (utrdlp + i);
                hba->lrb[i].utrd_dma_addr = hba->utrdl_dma_addr +
                                (i * sizeof(struct utp_transfer_req_desc));
                hba->lrb[i].ucd_req_ptr =
                        (struct utp_upiu_req *)(cmd_descp + i);
                hba->lrb[i].ucd_req_dma_addr = cmd_desc_element_addr;
                hba->lrb[i].ucd_rsp_ptr =
                        (struct utp_upiu_rsp *)cmd_descp[i].response_upiu;
                hba->lrb[i].ucd_rsp_dma_addr = cmd_desc_element_addr +
                                response_offset;
                hba->lrb[i].ucd_prdt_ptr =
                        (struct ufshcd_sg_entry *)cmd_descp[i].prd_table;
                hba->lrb[i].ucd_prdt_dma_addr = cmd_desc_element_addr +
                                prdt_offset;
        }
}

/**
 * ufshcd_dme_link_startup - Notify Unipro to perform link startup
 * @hba: per adapter instance
 *
 * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer,
 * in order to initialize the Unipro link startup procedure.
 * Once the Unipro links are up, the device connected to the controller
 * is detected.
 *
 * Returns 0 on success, non-zero value on failure
 */
static int ufshcd_dme_link_startup(struct ufs_hba *hba)
{
        struct uic_command uic_cmd = {0};
        int ret;

        uic_cmd.command = UIC_CMD_DME_LINK_STARTUP;

        ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
        if (ret)
                dev_dbg(hba->dev,
                        "dme-link-startup: error code %d\n", ret);
        return ret;
}

static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba)
{
        #define MIN_DELAY_BEFORE_DME_CMDS_US    1000
        unsigned long min_sleep_time_us;

        if (!(hba->quirks & UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS))
                return;

        /*
         * last_dme_cmd_tstamp will be 0 only for 1st call to
         * this function
         */
        if (unlikely(!ktime_to_us(hba->last_dme_cmd_tstamp))) {
                min_sleep_time_us = MIN_DELAY_BEFORE_DME_CMDS_US;
        } else {
                unsigned long delta =
                        (unsigned long) ktime_to_us(
                                ktime_sub(ktime_get(),
                                hba->last_dme_cmd_tstamp));

                if (delta < MIN_DELAY_BEFORE_DME_CMDS_US)
                        min_sleep_time_us =
                                MIN_DELAY_BEFORE_DME_CMDS_US - delta;
                else
                        return; /* no more delay required */
        }

        /* allow sleep for extra 50us if needed */
        usleep_range(min_sleep_time_us, min_sleep_time_us + 50);
}

/**
 * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET
 * @hba: per adapter instance
 * @attr_sel: uic command argument1
 * @attr_set: attribute set type as uic command argument2
 * @mib_val: setting value as uic command argument3
 * @peer: indicate whether peer or local
 *
 * Returns 0 on success, non-zero value on failure
 */
int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
                        u8 attr_set, u32 mib_val, u8 peer)
{
        struct uic_command uic_cmd = {0};
        static const char *const action[] = {
                "dme-set",
                "dme-peer-set"
        };
        const char *set = action[!!peer];
        int ret;
        int retries = UFS_UIC_COMMAND_RETRIES;

        uic_cmd.command = peer ?
                UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET;
        uic_cmd.argument1 = attr_sel;
        uic_cmd.argument2 = UIC_ARG_ATTR_TYPE(attr_set);
        uic_cmd.argument3 = mib_val;

        do {
                /* for peer attributes we retry upon failure */
                ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
                if (ret)
                        dev_dbg(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n",
                                set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret);
        } while (ret && peer && --retries);

        if (ret)
                dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x failed %d retries\n",
                        set, UIC_GET_ATTR_ID(attr_sel), mib_val,
                        UFS_UIC_COMMAND_RETRIES - retries);

        return ret;
}
EXPORT_SYMBOL_GPL(ufshcd_dme_set_attr);

/**
 * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET
 * @hba: per adapter instance
 * @attr_sel: uic command argument1
 * @mib_val: the value of the attribute as returned by the UIC command
 * @peer: indicate whether peer or local
 *
 * Returns 0 on success, non-zero value on failure
 */
int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
                        u32 *mib_val, u8 peer)
{
        struct uic_command uic_cmd = {0};
        static const char *const action[] = {
                "dme-get",
                "dme-peer-get"
        };
        const char *get = action[!!peer];
        int ret;
        int retries = UFS_UIC_COMMAND_RETRIES;
        struct ufs_pa_layer_attr orig_pwr_info;
        struct ufs_pa_layer_attr temp_pwr_info;
        bool pwr_mode_change = false;

        if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)) {
                orig_pwr_info = hba->pwr_info;
                temp_pwr_info = orig_pwr_info;

                if (orig_pwr_info.pwr_tx == FAST_MODE ||
                    orig_pwr_info.pwr_rx == FAST_MODE) {
                        temp_pwr_info.pwr_tx = FASTAUTO_MODE;
                        temp_pwr_info.pwr_rx = FASTAUTO_MODE;
                        pwr_mode_change = true;
                } else if (orig_pwr_info.pwr_tx == SLOW_MODE ||
                    orig_pwr_info.pwr_rx == SLOW_MODE) {
                        temp_pwr_info.pwr_tx = SLOWAUTO_MODE;
                        temp_pwr_info.pwr_rx = SLOWAUTO_MODE;
                        pwr_mode_change = true;
                }
                if (pwr_mode_change) {
                        ret = ufshcd_change_power_mode(hba, &temp_pwr_info);
                        if (ret)
                                goto out;
                }
        }

        uic_cmd.command = peer ?
                UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET;
        uic_cmd.argument1 = attr_sel;

        do {
                /* for peer attributes we retry upon failure */
                ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
                if (ret)
                        dev_dbg(hba->dev, "%s: attr-id 0x%x error code %d\n",
                                get, UIC_GET_ATTR_ID(attr_sel), ret);
        } while (ret && peer && --retries);

        if (ret)
                dev_err(hba->dev, "%s: attr-id 0x%x failed %d retries\n",
                        get, UIC_GET_ATTR_ID(attr_sel),
                        UFS_UIC_COMMAND_RETRIES - retries);

        if (mib_val && !ret)
                *mib_val = uic_cmd.argument3;

        if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)
            && pwr_mode_change)
                ufshcd_change_power_mode(hba, &orig_pwr_info);
out:
        return ret;
}
EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr);

/**
 * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power
 * state) and waits for it to take effect.
 *
 * @hba: per adapter instance
 * @cmd: UIC command to execute
 *
 * DME operations like DME_SET(PA_PWRMODE), DME_HIBERNATE_ENTER &
 * DME_HIBERNATE_EXIT commands take some time to take its effect on both host
 * and device UniPro link and hence it's final completion would be indicated by
 * dedicated status bits in Interrupt Status register (UPMS, UHES, UHXS) in
 * addition to normal UIC command completion Status (UCCS). This function only
 * returns after the relevant status bits indicate the completion.
 *
 * Returns 0 on success, non-zero value on failure
 */
static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)
{
        struct completion uic_async_done;
        unsigned long flags;
        u8 status;
        int ret;
        bool reenable_intr = false;

        mutex_lock(&hba->uic_cmd_mutex);
        init_completion(&uic_async_done);
        ufshcd_add_delay_before_dme_cmd(hba);

        spin_lock_irqsave(hba->host->host_lock, flags);
        hba->uic_async_done = &uic_async_done;
        if (ufshcd_readl(hba, REG_INTERRUPT_ENABLE) & UIC_COMMAND_COMPL) {
                ufshcd_disable_intr(hba, UIC_COMMAND_COMPL);
                /*
                 * Make sure UIC command completion interrupt is disabled before
                 * issuing UIC command.
                 */
                wmb();
                reenable_intr = true;
        }
        ret = __ufshcd_send_uic_cmd(hba, cmd, false);
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        if (ret) {
                dev_err(hba->dev,
                        "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n",
                        cmd->command, cmd->argument3, ret);
                goto out;
        }

        if (!wait_for_completion_timeout(hba->uic_async_done,
                                         msecs_to_jiffies(UIC_CMD_TIMEOUT))) {
                dev_err(hba->dev,
                        "pwr ctrl cmd 0x%x with mode 0x%x completion timeout\n",
                        cmd->command, cmd->argument3);
                ret = -ETIMEDOUT;
                goto out;
        }

        status = ufshcd_get_upmcrs(hba);
        if (status != PWR_LOCAL) {
                dev_err(hba->dev,
                        "pwr ctrl cmd 0x%0x failed, host upmcrs:0x%x\n",
                        cmd->command, status);
                ret = (status != PWR_OK) ? status : -1;
        }
out:
        if (ret) {
                ufshcd_print_host_state(hba);
                ufshcd_print_pwr_info(hba);
                ufshcd_print_host_regs(hba);
        }

        spin_lock_irqsave(hba->host->host_lock, flags);
        hba->active_uic_cmd = NULL;
        hba->uic_async_done = NULL;
        if (reenable_intr)
                ufshcd_enable_intr(hba, UIC_COMMAND_COMPL);
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        mutex_unlock(&hba->uic_cmd_mutex);

        return ret;
}

/**
 * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage
 *                              using DME_SET primitives.
 * @hba: per adapter instance
 * @mode: powr mode value
 *
 * Returns 0 on success, non-zero value on failure
 */
static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
{
        struct uic_command uic_cmd = {0};
        int ret;

        if (hba->quirks & UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP) {
                ret = ufshcd_dme_set(hba,
                                UIC_ARG_MIB_SEL(PA_RXHSUNTERMCAP, 0), 1);
                if (ret) {
                        dev_err(hba->dev, "%s: failed to enable PA_RXHSUNTERMCAP ret %d\n",
                                                __func__, ret);
                        goto out;
                }
        }

        uic_cmd.command = UIC_CMD_DME_SET;
        uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE);
        uic_cmd.argument3 = mode;
        ufshcd_hold(hba, false);
        ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd);
        ufshcd_release(hba);

out:
        return ret;
}

static int ufshcd_link_recovery(struct ufs_hba *hba)
{
        int ret;
        unsigned long flags;

        spin_lock_irqsave(hba->host->host_lock, flags);
        hba->ufshcd_state = UFSHCD_STATE_RESET;
        ufshcd_set_eh_in_progress(hba);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        ret = ufshcd_host_reset_and_restore(hba);

        spin_lock_irqsave(hba->host->host_lock, flags);
        if (ret)
                hba->ufshcd_state = UFSHCD_STATE_ERROR;
        ufshcd_clear_eh_in_progress(hba);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        if (ret)
                dev_err(hba->dev, "%s: link recovery failed, err %d",
                        __func__, ret);

        return ret;
}

static int __ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
{
        int ret;
        struct uic_command uic_cmd = {0};
        ktime_t start = ktime_get();

        ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER, PRE_CHANGE);

        uic_cmd.command = UIC_CMD_DME_HIBER_ENTER;
        ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd);
        trace_ufshcd_profile_hibern8(dev_name(hba->dev), "enter",
                             ktime_to_us(ktime_sub(ktime_get(), start)), ret);

        if (ret) {
                dev_err(hba->dev, "%s: hibern8 enter failed. ret = %d\n",
                        __func__, ret);

                /*
                 * If link recovery fails then return error so that caller
                 * don't retry the hibern8 enter again.
                 */
                if (ufshcd_link_recovery(hba))
                        ret = -ENOLINK;
        } else
                ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER,
                                                                POST_CHANGE);

        return ret;
}

static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
{
        int ret = 0, retries;

        for (retries = UIC_HIBERN8_ENTER_RETRIES; retries > 0; retries--) {
                ret = __ufshcd_uic_hibern8_enter(hba);
                if (!ret || ret == -ENOLINK)
                        goto out;
        }
out:
        return ret;
}

static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
{
        struct uic_command uic_cmd = {0};
        int ret;
        ktime_t start = ktime_get();

        ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_EXIT, PRE_CHANGE);

        uic_cmd.command = UIC_CMD_DME_HIBER_EXIT;
        ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd);
        trace_ufshcd_profile_hibern8(dev_name(hba->dev), "exit",
                             ktime_to_us(ktime_sub(ktime_get(), start)), ret);

        if (ret) {
                dev_err(hba->dev, "%s: hibern8 exit failed. ret = %d\n",
                        __func__, ret);
                ret = ufshcd_link_recovery(hba);
        } else {
                ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_EXIT,
                                                                POST_CHANGE);
                hba->ufs_stats.last_hibern8_exit_tstamp = ktime_get();
                hba->ufs_stats.hibern8_exit_cnt++;
        }

        return ret;
}

 /**
 * ufshcd_init_pwr_info - setting the POR (power on reset)
 * values in hba power info
 * @hba: per-adapter instance
 */
static void ufshcd_init_pwr_info(struct ufs_hba *hba)
{
        hba->pwr_info.gear_rx = UFS_PWM_G1;
        hba->pwr_info.gear_tx = UFS_PWM_G1;
        hba->pwr_info.lane_rx = 1;
        hba->pwr_info.lane_tx = 1;
        hba->pwr_info.pwr_rx = SLOWAUTO_MODE;
        hba->pwr_info.pwr_tx = SLOWAUTO_MODE;
        hba->pwr_info.hs_rate = 0;
}

/**
 * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device
 * @hba: per-adapter instance
 */
static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba)
{
        struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info;

        if (hba->max_pwr_info.is_valid)
                return 0;

        pwr_info->pwr_tx = FAST_MODE;
        pwr_info->pwr_rx = FAST_MODE;
        pwr_info->hs_rate = PA_HS_MODE_B;

        /* Get the connected lane count */
        ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
                        &pwr_info->lane_rx);
        ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
                        &pwr_info->lane_tx);

        if (!pwr_info->lane_rx || !pwr_info->lane_tx) {
                dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n",
                                __func__,
                                pwr_info->lane_rx,
                                pwr_info->lane_tx);
                return -EINVAL;
        }

        /*
         * First, get the maximum gears of HS speed.
         * If a zero value, it means there is no HSGEAR capability.
         * Then, get the maximum gears of PWM speed.
         */
        ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx);
        if (!pwr_info->gear_rx) {
                ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR),
                                &pwr_info->gear_rx);
                if (!pwr_info->gear_rx) {
                        dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n",
                                __func__, pwr_info->gear_rx);
                        return -EINVAL;
                }
                pwr_info->pwr_rx = SLOW_MODE;
        }

        ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR),
                        &pwr_info->gear_tx);
        if (!pwr_info->gear_tx) {
                ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR),
                                &pwr_info->gear_tx);
                if (!pwr_info->gear_tx) {
                        dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n",
                                __func__, pwr_info->gear_tx);
                        return -EINVAL;
                }
                pwr_info->pwr_tx = SLOW_MODE;
        }

        hba->max_pwr_info.is_valid = true;
        return 0;
}

static int ufshcd_change_power_mode(struct ufs_hba *hba,
                             struct ufs_pa_layer_attr *pwr_mode)
{
        int ret;

        /* if already configured to the requested pwr_mode */
        if (pwr_mode->gear_rx == hba->pwr_info.gear_rx &&
            pwr_mode->gear_tx == hba->pwr_info.gear_tx &&
            pwr_mode->lane_rx == hba->pwr_info.lane_rx &&
            pwr_mode->lane_tx == hba->pwr_info.lane_tx &&
            pwr_mode->pwr_rx == hba->pwr_info.pwr_rx &&
            pwr_mode->pwr_tx == hba->pwr_info.pwr_tx &&
            pwr_mode->hs_rate == hba->pwr_info.hs_rate) {
                dev_dbg(hba->dev, "%s: power already configured\n", __func__);
                return 0;
        }

        /*
         * Configure attributes for power mode change with below.
         * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION,
         * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION,
         * - PA_HSSERIES
         */
        ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx);
        ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES),
                        pwr_mode->lane_rx);
        if (pwr_mode->pwr_rx == FASTAUTO_MODE ||
                        pwr_mode->pwr_rx == FAST_MODE)
                ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE);
        else
                ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), FALSE);

        ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx);
        ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES),
                        pwr_mode->lane_tx);
        if (pwr_mode->pwr_tx == FASTAUTO_MODE ||
                        pwr_mode->pwr_tx == FAST_MODE)
                ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE);
        else
                ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), FALSE);

        if (pwr_mode->pwr_rx == FASTAUTO_MODE ||
            pwr_mode->pwr_tx == FASTAUTO_MODE ||
            pwr_mode->pwr_rx == FAST_MODE ||
            pwr_mode->pwr_tx == FAST_MODE)
                ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES),
                                                pwr_mode->hs_rate);

        ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4
                        | pwr_mode->pwr_tx);

        if (ret) {
                dev_err(hba->dev,
                        "%s: power mode change failed %d\n", __func__, ret);
        } else {
                ufshcd_vops_pwr_change_notify(hba, POST_CHANGE, NULL,
                                                                pwr_mode);

                memcpy(&hba->pwr_info, pwr_mode,
                        sizeof(struct ufs_pa_layer_attr));
        }

        return ret;
}

/**
 * ufshcd_config_pwr_mode - configure a new power mode
 * @hba: per-adapter instance
 * @desired_pwr_mode: desired power configuration
 */
static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
                struct ufs_pa_layer_attr *desired_pwr_mode)
{
        struct ufs_pa_layer_attr final_params = { 0 };
        int ret;

        ret = ufshcd_vops_pwr_change_notify(hba, PRE_CHANGE,
                                        desired_pwr_mode, &final_params);

        if (ret)
                memcpy(&final_params, desired_pwr_mode, sizeof(final_params));

        ret = ufshcd_change_power_mode(hba, &final_params);
        if (!ret)
                ufshcd_print_pwr_info(hba);

        return ret;
}

/**
 * ufshcd_complete_dev_init() - checks device readiness
 * hba: per-adapter instance
 *
 * Set fDeviceInit flag and poll until device toggles it.
 */
static int ufshcd_complete_dev_init(struct ufs_hba *hba)
{
        int i;
        int err;
        bool flag_res = 1;

        err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
                QUERY_FLAG_IDN_FDEVICEINIT, NULL);
        if (err) {
                dev_err(hba->dev,
                        "%s setting fDeviceInit flag failed with error %d\n",
                        __func__, err);
                goto out;
        }

        /* poll for max. 1000 iterations for fDeviceInit flag to clear */
        for (i = 0; i < 1000 && !err && flag_res; i++)
                err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG,
                        QUERY_FLAG_IDN_FDEVICEINIT, &flag_res);

        if (err)
                dev_err(hba->dev,
                        "%s reading fDeviceInit flag failed with error %d\n",
                        __func__, err);
        else if (flag_res)
                dev_err(hba->dev,
                        "%s fDeviceInit was not cleared by the device\n",
                        __func__);

out:
        return err;
}

/**
 * ufshcd_make_hba_operational - Make UFS controller operational
 * @hba: per adapter instance
 *
 * To bring UFS host controller to operational state,
 * 1. Enable required interrupts
 * 2. Configure interrupt aggregation
 * 3. Program UTRL and UTMRL base address
 * 4. Configure run-stop-registers
 *
 * Returns 0 on success, non-zero value on failure
 */
static int ufshcd_make_hba_operational(struct ufs_hba *hba)
{
        int err = 0;
        u32 reg;

        /* Enable required interrupts */
        ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);

        /* Configure interrupt aggregation */
        if (ufshcd_is_intr_aggr_allowed(hba))
                ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO);
        else
                ufshcd_disable_intr_aggr(hba);

        /* Configure UTRL and UTMRL base address registers */
        ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
                        REG_UTP_TRANSFER_REQ_LIST_BASE_L);
        ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr),
                        REG_UTP_TRANSFER_REQ_LIST_BASE_H);
        ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr),
                        REG_UTP_TASK_REQ_LIST_BASE_L);
        ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr),
                        REG_UTP_TASK_REQ_LIST_BASE_H);

        /*
         * Make sure base address and interrupt setup are updated before
         * enabling the run/stop registers below.
         */
        wmb();

        /*
         * UCRDY, UTMRLDY and UTRLRDY bits must be 1
         */
        reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS);
        if (!(ufshcd_get_lists_status(reg))) {
                ufshcd_enable_run_stop_reg(hba);
        } else {
                dev_err(hba->dev,
                        "Host controller not ready to process requests");
                err = -EIO;
                goto out;
        }

out:
        return err;
}

/**
 * ufshcd_hba_stop - Send controller to reset state
 * @hba: per adapter instance
 * @can_sleep: perform sleep or just spin
 */
static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)
{
        int err;

        ufshcd_writel(hba, CONTROLLER_DISABLE,  REG_CONTROLLER_ENABLE);
        err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE,
                                        CONTROLLER_ENABLE, CONTROLLER_DISABLE,
                                        10, 1, can_sleep);
        if (err)
                dev_err(hba->dev, "%s: Controller disable failed\n", __func__);
}

/**
 * ufshcd_hba_enable - initialize the controller
 * @hba: per adapter instance
 *
 * The controller resets itself and controller firmware initialization
 * sequence kicks off. When controller is ready it will set
 * the Host Controller Enable bit to 1.
 *
 * Returns 0 on success, non-zero value on failure
 */
static int ufshcd_hba_enable(struct ufs_hba *hba)
{
        int retry;

        /*
         * msleep of 1 and 5 used in this function might result in msleep(20),
         * but it was necessary to send the UFS FPGA to reset mode during
         * development and testing of this driver. msleep can be changed to
         * mdelay and retry count can be reduced based on the controller.
         */
        if (!ufshcd_is_hba_active(hba))
                /* change controller state to "reset state" */
                ufshcd_hba_stop(hba, true);

        /* UniPro link is disabled at this point */
        ufshcd_set_link_off(hba);

        ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE);

        /* start controller initialization sequence */
        ufshcd_hba_start(hba);

        /*
         * To initialize a UFS host controller HCE bit must be set to 1.
         * During initialization the HCE bit value changes from 1->0->1.
         * When the host controller completes initialization sequence
         * it sets the value of HCE bit to 1. The same HCE bit is read back
         * to check if the controller has completed initialization sequence.
         * So without this delay the value HCE = 1, set in the previous
         * instruction might be read back.
         * This delay can be changed based on the controller.
         */
        msleep(1);

        /* wait for the host controller to complete initialization */
        retry = 10;
        while (ufshcd_is_hba_active(hba)) {
                if (retry) {
                        retry--;
                } else {
                        dev_err(hba->dev,
                                "Controller enable failed\n");
                        return -EIO;
                }
                msleep(5);
        }

        /* enable UIC related interrupts */
        ufshcd_enable_intr(hba, UFSHCD_UIC_MASK);

        ufshcd_vops_hce_enable_notify(hba, POST_CHANGE);

        return 0;
}

static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer)
{
        int tx_lanes, i, err = 0;

        if (!peer)
                ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
                               &tx_lanes);
        else
                ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
                                    &tx_lanes);
        for (i = 0; i < tx_lanes; i++) {
                if (!peer)
                        err = ufshcd_dme_set(hba,
                                UIC_ARG_MIB_SEL(TX_LCC_ENABLE,
                                        UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)),
                                        0);
                else
                        err = ufshcd_dme_peer_set(hba,
                                UIC_ARG_MIB_SEL(TX_LCC_ENABLE,
                                        UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)),
                                        0);
                if (err) {
                        dev_err(hba->dev, "%s: TX LCC Disable failed, peer = %d, lane = %d, err = %d",
                                __func__, peer, i, err);
                        break;
                }
        }

        return err;
}

static inline int ufshcd_disable_device_tx_lcc(struct ufs_hba *hba)
{
        return ufshcd_disable_tx_lcc(hba, true);
}

/**
 * ufshcd_link_startup - Initialize unipro link startup
 * @hba: per adapter instance
 *
 * Returns 0 for success, non-zero in case of failure
 */
static int ufshcd_link_startup(struct ufs_hba *hba)
{
        int ret;
        int retries = DME_LINKSTARTUP_RETRIES;
        bool link_startup_again = false;

        /*
         * If UFS device isn't active then we will have to issue link startup
         * 2 times to make sure the device state move to active.
         */
        if (!ufshcd_is_ufs_dev_active(hba))
                link_startup_again = true;

link_startup:
        do {
                ufshcd_vops_link_startup_notify(hba, PRE_CHANGE);

                ret = ufshcd_dme_link_startup(hba);

                /* check if device is detected by inter-connect layer */
                if (!ret && !ufshcd_is_device_present(hba)) {
                        dev_err(hba->dev, "%s: Device not present\n", __func__);
                        ret = -ENXIO;
                        goto out;
                }

                /*
                 * DME link lost indication is only received when link is up,
                 * but we can't be sure if the link is up until link startup
                 * succeeds. So reset the local Uni-Pro and try again.
                 */
                if (ret && ufshcd_hba_enable(hba))
                        goto out;
        } while (ret && retries--);

        if (ret)
                /* failed to get the link up... retire */
                goto out;

        if (link_startup_again) {
                link_startup_again = false;
                retries = DME_LINKSTARTUP_RETRIES;
                goto link_startup;
        }

        /* Mark that link is up in PWM-G1, 1-lane, SLOW-AUTO mode */
        ufshcd_init_pwr_info(hba);
        ufshcd_print_pwr_info(hba);

        if (hba->quirks & UFSHCD_QUIRK_BROKEN_LCC) {
                ret = ufshcd_disable_device_tx_lcc(hba);
                if (ret)
                        goto out;
        }

        /* Include any host controller configuration via UIC commands */
        ret = ufshcd_vops_link_startup_notify(hba, POST_CHANGE);
        if (ret)
                goto out;

        ret = ufshcd_make_hba_operational(hba);
out:
        if (ret) {
                dev_err(hba->dev, "link startup failed %d\n", ret);
                ufshcd_print_host_state(hba);
                ufshcd_print_pwr_info(hba);
                ufshcd_print_host_regs(hba);
        }
        return ret;
}

/**
 * ufshcd_verify_dev_init() - Verify device initialization
 * @hba: per-adapter instance
 *
 * Send NOP OUT UPIU and wait for NOP IN response to check whether the
 * device Transport Protocol (UTP) layer is ready after a reset.
 * If the UTP layer at the device side is not initialized, it may
 * not respond with NOP IN UPIU within timeout of %NOP_OUT_TIMEOUT
 * and we retry sending NOP OUT for %NOP_OUT_RETRIES iterations.
 */
static int ufshcd_verify_dev_init(struct ufs_hba *hba)
{
        int err = 0;
        int retries;

        ufshcd_hold(hba, false);
        mutex_lock(&hba->dev_cmd.lock);
        for (retries = NOP_OUT_RETRIES; retries > 0; retries--) {
                err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP,
                                               NOP_OUT_TIMEOUT);

                if (!err || err == -ETIMEDOUT)
                        break;

                dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err);
        }
        mutex_unlock(&hba->dev_cmd.lock);
        ufshcd_release(hba);

        if (err)
                dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err);
        return err;
}

/**
 * ufshcd_set_queue_depth - set lun queue depth
 * @sdev: pointer to SCSI device
 *
 * Read bLUQueueDepth value and activate scsi tagged command
 * queueing. For WLUN, queue depth is set to 1. For best-effort
 * cases (bLUQueueDepth = 0) the queue depth is set to a maximum
 * value that host can queue.
 */
static void ufshcd_set_queue_depth(struct scsi_device *sdev)
{
        int ret = 0;
        u8 lun_qdepth;
        struct ufs_hba *hba;

        hba = shost_priv(sdev->host);

        lun_qdepth = hba->nutrs;
        ret = ufshcd_read_unit_desc_param(hba,
                                          ufshcd_scsi_to_upiu_lun(sdev->lun),
                                          UNIT_DESC_PARAM_LU_Q_DEPTH,
                                          &lun_qdepth,
                                          sizeof(lun_qdepth));

        /* Some WLUN doesn't support unit descriptor */
        if (ret == -EOPNOTSUPP)
                lun_qdepth = 1;
        else if (!lun_qdepth)
                /* eventually, we can figure out the real queue depth */
                lun_qdepth = hba->nutrs;
        else
                lun_qdepth = min_t(int, lun_qdepth, hba->nutrs);

        dev_dbg(hba->dev, "%s: activate tcq with queue depth %d\n",
                        __func__, lun_qdepth);
        scsi_change_queue_depth(sdev, lun_qdepth);
}

/*
 * ufshcd_get_lu_wp - returns the "b_lu_write_protect" from UNIT DESCRIPTOR
 * @hba: per-adapter instance
 * @lun: UFS device lun id
 * @b_lu_write_protect: pointer to buffer to hold the LU's write protect info
 *
 * Returns 0 in case of success and b_lu_write_protect status would be returned
 * @b_lu_write_protect parameter.
 * Returns -ENOTSUPP if reading b_lu_write_protect is not supported.
 * Returns -EINVAL in case of invalid parameters passed to this function.
 */
static int ufshcd_get_lu_wp(struct ufs_hba *hba,
                            u8 lun,
                            u8 *b_lu_write_protect)
{
        int ret;

        if (!b_lu_write_protect)
                ret = -EINVAL;
        /*
         * According to UFS device spec, RPMB LU can't be write
         * protected so skip reading bLUWriteProtect parameter for
         * it. For other W-LUs, UNIT DESCRIPTOR is not available.
         */
        else if (lun >= UFS_UPIU_MAX_GENERAL_LUN)
                ret = -ENOTSUPP;
        else
                ret = ufshcd_read_unit_desc_param(hba,
                                          lun,
                                          UNIT_DESC_PARAM_LU_WR_PROTECT,
                                          b_lu_write_protect,
                                          sizeof(*b_lu_write_protect));
        return ret;
}

/**
 * ufshcd_get_lu_power_on_wp_status - get LU's power on write protect
 * status
 * @hba: per-adapter instance
 * @sdev: pointer to SCSI device
 *
 */
static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba,
                                                    struct scsi_device *sdev)
{
        if (hba->dev_info.f_power_on_wp_en &&
            !hba->dev_info.is_lu_power_on_wp) {
                u8 b_lu_write_protect;

                if (!ufshcd_get_lu_wp(hba, ufshcd_scsi_to_upiu_lun(sdev->lun),
                                      &b_lu_write_protect) &&
                    (b_lu_write_protect == UFS_LU_POWER_ON_WP))
                        hba->dev_info.is_lu_power_on_wp = true;
        }
}

/**
 * ufshcd_slave_alloc - handle initial SCSI device configurations
 * @sdev: pointer to SCSI device
 *
 * Returns success
 */
static int ufshcd_slave_alloc(struct scsi_device *sdev)
{
        struct ufs_hba *hba;

        hba = shost_priv(sdev->host);

        /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */
        sdev->use_10_for_ms = 1;

        /* allow SCSI layer to restart the device in case of errors */
        sdev->allow_restart = 1;

        /* REPORT SUPPORTED OPERATION CODES is not supported */
        sdev->no_report_opcodes = 1;


        ufshcd_set_queue_depth(sdev);

        ufshcd_get_lu_power_on_wp_status(hba, sdev);

        return 0;
}

/**
 * ufshcd_change_queue_depth - change queue depth
 * @sdev: pointer to SCSI device
 * @depth: required depth to set
 *
 * Change queue depth and make sure the max. limits are not crossed.
 */
static int ufshcd_change_queue_depth(struct scsi_device *sdev, int depth)
{
        struct ufs_hba *hba = shost_priv(sdev->host);

        if (depth > hba->nutrs)
                depth = hba->nutrs;
        return scsi_change_queue_depth(sdev, depth);
}

/**
 * ufshcd_slave_configure - adjust SCSI device configurations
 * @sdev: pointer to SCSI device
 */
static int ufshcd_slave_configure(struct scsi_device *sdev)
{
        struct request_queue *q = sdev->request_queue;

        blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
        blk_queue_max_segment_size(q, PRDT_DATA_BYTE_COUNT_MAX);

        return 0;
}

/**
 * ufshcd_slave_destroy - remove SCSI device configurations
 * @sdev: pointer to SCSI device
 */
static void ufshcd_slave_destroy(struct scsi_device *sdev)
{
        struct ufs_hba *hba;

        hba = shost_priv(sdev->host);
        /* Drop the reference as it won't be needed anymore */
        if (ufshcd_scsi_to_upiu_lun(sdev->lun) == UFS_UPIU_UFS_DEVICE_WLUN) {
                unsigned long flags;

                spin_lock_irqsave(hba->host->host_lock, flags);
                hba->sdev_ufs_device = NULL;
                spin_unlock_irqrestore(hba->host->host_lock, flags);
        }
}

/**
 * ufshcd_task_req_compl - handle task management request completion
 * @hba: per adapter instance
 * @index: index of the completed request
 * @resp: task management service response
 *
 * Returns non-zero value on error, zero on success
 */
static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index, u8 *resp)
{
        struct utp_task_req_desc *task_req_descp;
        struct utp_upiu_task_rsp *task_rsp_upiup;
        unsigned long flags;
        int ocs_value;
        int task_result;

        spin_lock_irqsave(hba->host->host_lock, flags);

        /* Clear completed tasks from outstanding_tasks */
        __clear_bit(index, &hba->outstanding_tasks);

        task_req_descp = hba->utmrdl_base_addr;
        ocs_value = ufshcd_get_tmr_ocs(&task_req_descp[index]);

        if (ocs_value == OCS_SUCCESS) {
                task_rsp_upiup = (struct utp_upiu_task_rsp *)
                                task_req_descp[index].task_rsp_upiu;
                task_result = be32_to_cpu(task_rsp_upiup->output_param1);
                task_result = task_result & MASK_TM_SERVICE_RESP;
                if (resp)
                        *resp = (u8)task_result;
        } else {
                dev_err(hba->dev, "%s: failed, ocs = 0x%x\n",
                                __func__, ocs_value);
        }
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        return ocs_value;
}

/**
 * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status
 * @lrb: pointer to local reference block of completed command
 * @scsi_status: SCSI command status
 *
 * Returns value base on SCSI command status
 */
static inline int
ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status)
{
        int result = 0;

        switch (scsi_status) {
        case SAM_STAT_CHECK_CONDITION:
                ufshcd_copy_sense_data(lrbp);
        case SAM_STAT_GOOD:
                result |= DID_OK << 16 |
                          COMMAND_COMPLETE << 8 |
                          scsi_status;
                break;
        case SAM_STAT_TASK_SET_FULL:
        case SAM_STAT_BUSY:
        case SAM_STAT_TASK_ABORTED:
                ufshcd_copy_sense_data(lrbp);
                result |= scsi_status;
                break;
        default:
                result |= DID_ERROR << 16;
                break;
        } /* end of switch */

        return result;
}

/**
 * ufshcd_transfer_rsp_status - Get overall status of the response
 * @hba: per adapter instance
 * @lrb: pointer to local reference block of completed command
 *
 * Returns result of the command to notify SCSI midlayer
 */
static inline int
ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
{
        int result = 0;
        int scsi_status;
        int ocs;

        /* overall command status of utrd */
        ocs = ufshcd_get_tr_ocs(lrbp);

        switch (ocs) {
        case OCS_SUCCESS:
                result = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr);
                hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0);
                switch (result) {
                case UPIU_TRANSACTION_RESPONSE:
                        /*
                         * get the response UPIU result to extract
                         * the SCSI command status
                         */
                        result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr);

                        /*
                         * get the result based on SCSI status response
                         * to notify the SCSI midlayer of the command status
                         */
                        scsi_status = result & MASK_SCSI_STATUS;
                        result = ufshcd_scsi_cmd_status(lrbp, scsi_status);

                        /*
                         * Currently we are only supporting BKOPs exception
                         * events hence we can ignore BKOPs exception event
                         * during power management callbacks. BKOPs exception
                         * event is not expected to be raised in runtime suspend
                         * callback as it allows the urgent bkops.
                         * During system suspend, we are anyway forcefully
                         * disabling the bkops and if urgent bkops is needed
                         * it will be enabled on system resume. Long term
                         * solution could be to abort the system suspend if
                         * UFS device needs urgent BKOPs.
                         */
                        if (!hba->pm_op_in_progress &&
                            ufshcd_is_exception_event(lrbp->ucd_rsp_ptr))
                                schedule_work(&hba->eeh_work);
                        break;
                case UPIU_TRANSACTION_REJECT_UPIU:
                        /* TODO: handle Reject UPIU Response */
                        result = DID_ERROR << 16;
                        dev_err(hba->dev,
                                "Reject UPIU not fully implemented\n");
                        break;
                default:
                        result = DID_ERROR << 16;
                        dev_err(hba->dev,
                                "Unexpected request response code = %x\n",
                                result);
                        break;
                }
                break;
        case OCS_ABORTED:
                result |= DID_ABORT << 16;
                break;
        case OCS_INVALID_COMMAND_STATUS:
                result |= DID_REQUEUE << 16;
                break;
        case OCS_INVALID_CMD_TABLE_ATTR:
        case OCS_INVALID_PRDT_ATTR:
        case OCS_MISMATCH_DATA_BUF_SIZE:
        case OCS_MISMATCH_RESP_UPIU_SIZE:
        case OCS_PEER_COMM_FAILURE:
        case OCS_FATAL_ERROR:
        default:
                result |= DID_ERROR << 16;
                dev_err(hba->dev,
                                "OCS error from controller = %x for tag %d\n",
                                ocs, lrbp->task_tag);
                ufshcd_print_host_regs(hba);
                ufshcd_print_host_state(hba);
                break;
        } /* end of switch */

        if (host_byte(result) != DID_OK)
                ufshcd_print_trs(hba, 1 << lrbp->task_tag, true);
        return result;
}

/**
 * ufshcd_uic_cmd_compl - handle completion of uic command
 * @hba: per adapter instance
 * @intr_status: interrupt status generated by the controller
 */
static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
{
        if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) {
                hba->active_uic_cmd->argument2 |=
                        ufshcd_get_uic_cmd_result(hba);
                hba->active_uic_cmd->argument3 =
                        ufshcd_get_dme_attr_val(hba);
                complete(&hba->active_uic_cmd->done);
        }

        if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done)
                complete(hba->uic_async_done);
}

/**
 * __ufshcd_transfer_req_compl - handle SCSI and query command completion
 * @hba: per adapter instance
 * @completed_reqs: requests to complete
 */
static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
                                        unsigned long completed_reqs)
{
        struct ufshcd_lrb *lrbp;
        struct scsi_cmnd *cmd;
        int result;
        int index;

        for_each_set_bit(index, &completed_reqs, hba->nutrs) {
                lrbp = &hba->lrb[index];
                cmd = lrbp->cmd;
                if (cmd) {
                        ufshcd_add_command_trace(hba, index, "complete");
                        result = ufshcd_transfer_rsp_status(hba, lrbp);
                        scsi_dma_unmap(cmd);
                        cmd->result = result;
                        /* Mark completed command as NULL in LRB */
                        lrbp->cmd = NULL;
                        clear_bit_unlock(index, &hba->lrb_in_use);
                        /* Do not touch lrbp after scsi done */
                        cmd->scsi_done(cmd);
                        __ufshcd_release(hba);
                } else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
                        lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
                        if (hba->dev_cmd.complete) {
                                ufshcd_add_command_trace(hba, index,
                                                "dev_complete");
                                complete(hba->dev_cmd.complete);
                        }
                }
                if (ufshcd_is_clkscaling_supported(hba))
                        hba->clk_scaling.active_reqs--;
        }

        /* clear corresponding bits of completed commands */
        hba->outstanding_reqs ^= completed_reqs;

        ufshcd_clk_scaling_update_busy(hba);

        /* we might have free'd some tags above */
        wake_up(&hba->dev_cmd.tag_wq);
}

/**
 * ufshcd_transfer_req_compl - handle SCSI and query command completion
 * @hba: per adapter instance
 */
static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
{
        unsigned long completed_reqs;
        u32 tr_doorbell;

        /* Resetting interrupt aggregation counters first and reading the
         * DOOR_BELL afterward allows us to handle all the completed requests.
         * In order to prevent other interrupts starvation the DB is read once
         * after reset. The down side of this solution is the possibility of
         * false interrupt if device completes another request after resetting
         * aggregation and before reading the DB.
         */
        if (ufshcd_is_intr_aggr_allowed(hba))
                ufshcd_reset_intr_aggr(hba);

        tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
        completed_reqs = tr_doorbell ^ hba->outstanding_reqs;

        __ufshcd_transfer_req_compl(hba, completed_reqs);
}

/**
 * ufshcd_disable_ee - disable exception event
 * @hba: per-adapter instance
 * @mask: exception event to disable
 *
 * Disables exception event in the device so that the EVENT_ALERT
 * bit is not set.
 *
 * Returns zero on success, non-zero error value on failure.
 */
static int ufshcd_disable_ee(struct ufs_hba *hba, u16 mask)
{
        int err = 0;
        u32 val;

        if (!(hba->ee_ctrl_mask & mask))
                goto out;

        val = hba->ee_ctrl_mask & ~mask;
        val &= MASK_EE_STATUS;
        err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
                        QUERY_ATTR_IDN_EE_CONTROL, 0, 0, &val);
        if (!err)
                hba->ee_ctrl_mask &= ~mask;
out:
        return err;
}

/**
 * ufshcd_enable_ee - enable exception event
 * @hba: per-adapter instance
 * @mask: exception event to enable
 *
 * Enable corresponding exception event in the device to allow
 * device to alert host in critical scenarios.
 *
 * Returns zero on success, non-zero error value on failure.
 */
static int ufshcd_enable_ee(struct ufs_hba *hba, u16 mask)
{
        int err = 0;
        u32 val;

        if (hba->ee_ctrl_mask & mask)
                goto out;

        val = hba->ee_ctrl_mask | mask;
        val &= MASK_EE_STATUS;
        err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
                        QUERY_ATTR_IDN_EE_CONTROL, 0, 0, &val);
        if (!err)
                hba->ee_ctrl_mask |= mask;
out:
        return err;
}

/**
 * ufshcd_enable_auto_bkops - Allow device managed BKOPS
 * @hba: per-adapter instance
 *
 * Allow device to manage background operations on its own. Enabling
 * this might lead to inconsistent latencies during normal data transfers
 * as the device is allowed to manage its own way of handling background
 * operations.
 *
 * Returns zero on success, non-zero on failure.
 */
static int ufshcd_enable_auto_bkops(struct ufs_hba *hba)
{
        int err = 0;

        if (hba->auto_bkops_enabled)
                goto out;

        err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
                        QUERY_FLAG_IDN_BKOPS_EN, NULL);
        if (err) {
                dev_err(hba->dev, "%s: failed to enable bkops %d\n",
                                __func__, err);
                goto out;
        }

        hba->auto_bkops_enabled = true;
        trace_ufshcd_auto_bkops_state(dev_name(hba->dev), "Enabled");

        /* No need of URGENT_BKOPS exception from the device */
        err = ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS);
        if (err)
                dev_err(hba->dev, "%s: failed to disable exception event %d\n",
                                __func__, err);
out:
        return err;
}

/**
 * ufshcd_disable_auto_bkops - block device in doing background operations
 * @hba: per-adapter instance
 *
 * Disabling background operations improves command response latency but
 * has drawback of device moving into critical state where the device is
 * not-operable. Make sure to call ufshcd_enable_auto_bkops() whenever the
 * host is idle so that BKOPS are managed effectively without any negative
 * impacts.
 *
 * Returns zero on success, non-zero on failure.
 */
static int ufshcd_disable_auto_bkops(struct ufs_hba *hba)
{
        int err = 0;

        if (!hba->auto_bkops_enabled)
                goto out;

        /*
         * If host assisted BKOPs is to be enabled, make sure
         * urgent bkops exception is allowed.
         */
        err = ufshcd_enable_ee(hba, MASK_EE_URGENT_BKOPS);
        if (err) {
                dev_err(hba->dev, "%s: failed to enable exception event %d\n",
                                __func__, err);
                goto out;
        }

        err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG,
                        QUERY_FLAG_IDN_BKOPS_EN, NULL);
        if (err) {
                dev_err(hba->dev, "%s: failed to disable bkops %d\n",
                                __func__, err);
                ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS);
                goto out;
        }

        hba->auto_bkops_enabled = false;
        trace_ufshcd_auto_bkops_state(dev_name(hba->dev), "Disabled");
out:
        return err;
}

/**
 * ufshcd_force_reset_auto_bkops - force reset auto bkops state
 * @hba: per adapter instance
 *
 * After a device reset the device may toggle the BKOPS_EN flag
 * to default value. The s/w tracking variables should be updated
 * as well. This function would change the auto-bkops state based on
 * UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND.
 */
static void ufshcd_force_reset_auto_bkops(struct ufs_hba *hba)
{
        if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) {
                hba->auto_bkops_enabled = false;
                hba->ee_ctrl_mask |= MASK_EE_URGENT_BKOPS;
                ufshcd_enable_auto_bkops(hba);
        } else {
                hba->auto_bkops_enabled = true;
                hba->ee_ctrl_mask &= ~MASK_EE_URGENT_BKOPS;
                ufshcd_disable_auto_bkops(hba);
        }
}

static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status)
{
        return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
                        QUERY_ATTR_IDN_BKOPS_STATUS, 0, 0, status);
}

/**
 * ufshcd_bkops_ctrl - control the auto bkops based on current bkops status
 * @hba: per-adapter instance
 * @status: bkops_status value
 *
 * Read the bkops_status from the UFS device and Enable fBackgroundOpsEn
 * flag in the device to permit background operations if the device
 * bkops_status is greater than or equal to "status" argument passed to
 * this function, disable otherwise.
 *
 * Returns 0 for success, non-zero in case of failure.
 *
 * NOTE: Caller of this function can check the "hba->auto_bkops_enabled" flag
 * to know whether auto bkops is enabled or disabled after this function
 * returns control to it.
 */
static int ufshcd_bkops_ctrl(struct ufs_hba *hba,
                             enum bkops_status status)
{
        int err;
        u32 curr_status = 0;

        err = ufshcd_get_bkops_status(hba, &curr_status);
        if (err) {
                dev_err(hba->dev, "%s: failed to get BKOPS status %d\n",
                                __func__, err);
                goto out;
        } else if (curr_status > BKOPS_STATUS_MAX) {
                dev_err(hba->dev, "%s: invalid BKOPS status %d\n",
                                __func__, curr_status);
                err = -EINVAL;
                goto out;
        }

        if (curr_status >= status)
                err = ufshcd_enable_auto_bkops(hba);
        else
                err = ufshcd_disable_auto_bkops(hba);
out:
        return err;
}

/**
 * ufshcd_urgent_bkops - handle urgent bkops exception event
 * @hba: per-adapter instance
 *
 * Enable fBackgroundOpsEn flag in the device to permit background
 * operations.
 *
 * If BKOPs is enabled, this function returns 0, 1 if the bkops in not enabled
 * and negative error value for any other failure.
 */
static int ufshcd_urgent_bkops(struct ufs_hba *hba)
{
        return ufshcd_bkops_ctrl(hba, hba->urgent_bkops_lvl);
}

static inline int ufshcd_get_ee_status(struct ufs_hba *hba, u32 *status)
{
        return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
                        QUERY_ATTR_IDN_EE_STATUS, 0, 0, status);
}

static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba)
{
        int err;
        u32 curr_status = 0;

        if (hba->is_urgent_bkops_lvl_checked)
                goto enable_auto_bkops;

        err = ufshcd_get_bkops_status(hba, &curr_status);
        if (err) {
                dev_err(hba->dev, "%s: failed to get BKOPS status %d\n",
                                __func__, err);
                goto out;
        }

        /*
         * We are seeing that some devices are raising the urgent bkops
         * exception events even when BKOPS status doesn't indicate performace
         * impacted or critical. Handle these device by determining their urgent
         * bkops status at runtime.
         */
        if (curr_status < BKOPS_STATUS_PERF_IMPACT) {
                dev_err(hba->dev, "%s: device raised urgent BKOPS exception for bkops status %d\n",
                                __func__, curr_status);
                /* update the current status as the urgent bkops level */
                hba->urgent_bkops_lvl = curr_status;
                hba->is_urgent_bkops_lvl_checked = true;
        }

enable_auto_bkops:
        err = ufshcd_enable_auto_bkops(hba);
out:
        if (err < 0)
                dev_err(hba->dev, "%s: failed to handle urgent bkops %d\n",
                                __func__, err);
}

/**
 * ufshcd_exception_event_handler - handle exceptions raised by device
 * @work: pointer to work data
 *
 * Read bExceptionEventStatus attribute from the device and handle the
 * exception event accordingly.
 */
static void ufshcd_exception_event_handler(struct work_struct *work)
{
        struct ufs_hba *hba;
        int err;
        u32 status = 0;
        hba = container_of(work, struct ufs_hba, eeh_work);

        pm_runtime_get_sync(hba->dev);
        err = ufshcd_get_ee_status(hba, &status);
        if (err) {
                dev_err(hba->dev, "%s: failed to get exception status %d\n",
                                __func__, err);
                goto out;
        }

        status &= hba->ee_ctrl_mask;

        if (status & MASK_EE_URGENT_BKOPS)
                ufshcd_bkops_exception_event_handler(hba);

out:
        pm_runtime_put_sync(hba->dev);
        return;
}

/* Complete requests that have door-bell cleared */
static void ufshcd_complete_requests(struct ufs_hba *hba)
{
        ufshcd_transfer_req_compl(hba);
        ufshcd_tmc_handler(hba);
}

/**
 * ufshcd_quirk_dl_nac_errors - This function checks if error handling is
 *                              to recover from the DL NAC errors or not.
 * @hba: per-adapter instance
 *
 * Returns true if error handling is required, false otherwise
 */
static bool ufshcd_quirk_dl_nac_errors(struct ufs_hba *hba)
{
        unsigned long flags;
        bool err_handling = true;

        spin_lock_irqsave(hba->host->host_lock, flags);
        /*
         * UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS only workaround the
         * device fatal error and/or DL NAC & REPLAY timeout errors.
         */
        if (hba->saved_err & (CONTROLLER_FATAL_ERROR | SYSTEM_BUS_FATAL_ERROR))
                goto out;

        if ((hba->saved_err & DEVICE_FATAL_ERROR) ||
            ((hba->saved_err & UIC_ERROR) &&
             (hba->saved_uic_err & UFSHCD_UIC_DL_TCx_REPLAY_ERROR)))
                goto out;

        if ((hba->saved_err & UIC_ERROR) &&
            (hba->saved_uic_err & UFSHCD_UIC_DL_NAC_RECEIVED_ERROR)) {
                int err;
                /*
                 * wait for 50ms to see if we can get any other errors or not.
                 */
                spin_unlock_irqrestore(hba->host->host_lock, flags);
                msleep(50);
                spin_lock_irqsave(hba->host->host_lock, flags);

                /*
                 * now check if we have got any other severe errors other than
                 * DL NAC error?
                 */
                if ((hba->saved_err & INT_FATAL_ERRORS) ||
                    ((hba->saved_err & UIC_ERROR) &&
                    (hba->saved_uic_err & ~UFSHCD_UIC_DL_NAC_RECEIVED_ERROR)))
                        goto out;

                /*
                 * As DL NAC is the only error received so far, send out NOP
                 * command to confirm if link is still active or not.
                 *   - If we don't get any response then do error recovery.
                 *   - If we get response then clear the DL NAC error bit.
                 */

                spin_unlock_irqrestore(hba->host->host_lock, flags);
                err = ufshcd_verify_dev_init(hba);
                spin_lock_irqsave(hba->host->host_lock, flags);

                if (err)
                        goto out;

                /* Link seems to be alive hence ignore the DL NAC errors */
                if (hba->saved_uic_err == UFSHCD_UIC_DL_NAC_RECEIVED_ERROR)
                        hba->saved_err &= ~UIC_ERROR;
                /* clear NAC error */
                hba->saved_uic_err &= ~UFSHCD_UIC_DL_NAC_RECEIVED_ERROR;
                if (!hba->saved_uic_err) {
                        err_handling = false;
                        goto out;
                }
        }
out:
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        return err_handling;
}

/**
 * ufshcd_err_handler - handle UFS errors that require s/w attention
 * @work: pointer to work structure
 */
static void ufshcd_err_handler(struct work_struct *work)
{
        struct ufs_hba *hba;
        unsigned long flags;
        u32 err_xfer = 0;
        u32 err_tm = 0;
        int err = 0;
        int tag;
        bool needs_reset = false;

        hba = container_of(work, struct ufs_hba, eh_work);

        pm_runtime_get_sync(hba->dev);
        ufshcd_hold(hba, false);

        spin_lock_irqsave(hba->host->host_lock, flags);
        if (hba->ufshcd_state == UFSHCD_STATE_RESET)
                goto out;

        hba->ufshcd_state = UFSHCD_STATE_RESET;
        ufshcd_set_eh_in_progress(hba);

        /* Complete requests that have door-bell cleared by h/w */
        ufshcd_complete_requests(hba);

        if (hba->dev_quirks & UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) {
                bool ret;

                spin_unlock_irqrestore(hba->host->host_lock, flags);
                /* release the lock as ufshcd_quirk_dl_nac_errors() may sleep */
                ret = ufshcd_quirk_dl_nac_errors(hba);
                spin_lock_irqsave(hba->host->host_lock, flags);
                if (!ret)
                        goto skip_err_handling;
        }
        if ((hba->saved_err & INT_FATAL_ERRORS) ||
            ((hba->saved_err & UIC_ERROR) &&
            (hba->saved_uic_err & (UFSHCD_UIC_DL_PA_INIT_ERROR |
                                   UFSHCD_UIC_DL_NAC_RECEIVED_ERROR |
                                   UFSHCD_UIC_DL_TCx_REPLAY_ERROR))))
                needs_reset = true;

        /*
         * if host reset is required then skip clearing the pending
         * transfers forcefully because they will automatically get
         * cleared after link startup.
         */
        if (needs_reset)
                goto skip_pending_xfer_clear;

        /* release lock as clear command might sleep */
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        /* Clear pending transfer requests */
        for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) {
                if (ufshcd_clear_cmd(hba, tag)) {
                        err_xfer = true;
                        goto lock_skip_pending_xfer_clear;
                }
        }

        /* Clear pending task management requests */
        for_each_set_bit(tag, &hba->outstanding_tasks, hba->nutmrs) {
                if (ufshcd_clear_tm_cmd(hba, tag)) {
                        err_tm = true;
                        goto lock_skip_pending_xfer_clear;
                }
        }

lock_skip_pending_xfer_clear:
        spin_lock_irqsave(hba->host->host_lock, flags);

        /* Complete the requests that are cleared by s/w */
        ufshcd_complete_requests(hba);

        if (err_xfer || err_tm)
                needs_reset = true;

skip_pending_xfer_clear:
        /* Fatal errors need reset */
        if (needs_reset) {
                unsigned long max_doorbells = (1UL << hba->nutrs) - 1;

                /*
                 * ufshcd_reset_and_restore() does the link reinitialization
                 * which will need atleast one empty doorbell slot to send the
                 * device management commands (NOP and query commands).
                 * If there is no slot empty at this moment then free up last
                 * slot forcefully.
                 */
                if (hba->outstanding_reqs == max_doorbells)
                        __ufshcd_transfer_req_compl(hba,
                                                    (1UL << (hba->nutrs - 1)));

                spin_unlock_irqrestore(hba->host->host_lock, flags);
                err = ufshcd_reset_and_restore(hba);
                spin_lock_irqsave(hba->host->host_lock, flags);
                if (err) {
                        dev_err(hba->dev, "%s: reset and restore failed\n",
                                        __func__);
                        hba->ufshcd_state = UFSHCD_STATE_ERROR;
                }
                /*
                 * Inform scsi mid-layer that we did reset and allow to handle
                 * Unit Attention properly.
                 */
                scsi_report_bus_reset(hba->host, 0);
                hba->saved_err = 0;
                hba->saved_uic_err = 0;
        }

skip_err_handling:
        if (!needs_reset) {
                hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
                if (hba->saved_err || hba->saved_uic_err)
                        dev_err_ratelimited(hba->dev, "%s: exit: saved_err 0x%x saved_uic_err 0x%x",
                            __func__, hba->saved_err, hba->saved_uic_err);
        }

        ufshcd_clear_eh_in_progress(hba);

out:
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        scsi_unblock_requests(hba->host);
        ufshcd_release(hba);
        pm_runtime_put_sync(hba->dev);
}

static void ufshcd_update_uic_reg_hist(struct ufs_uic_err_reg_hist *reg_hist,
                u32 reg)
{
        reg_hist->reg[reg_hist->pos] = reg;
        reg_hist->tstamp[reg_hist->pos] = ktime_get();
        reg_hist->pos = (reg_hist->pos + 1) % UIC_ERR_REG_HIST_LENGTH;
}

/**
 * ufshcd_update_uic_error - check and set fatal UIC error flags.
 * @hba: per-adapter instance
 */
static void ufshcd_update_uic_error(struct ufs_hba *hba)
{
        u32 reg;

        /* PHY layer lane error */
        reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER);
        /* Ignore LINERESET indication, as this is not an error */
        if ((reg & UIC_PHY_ADAPTER_LAYER_ERROR) &&
                        (reg & UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK)) {
                /*
                 * To know whether this error is fatal or not, DB timeout
                 * must be checked but this error is handled separately.
                 */
                dev_dbg(hba->dev, "%s: UIC Lane error reported\n", __func__);
                ufshcd_update_uic_reg_hist(&hba->ufs_stats.pa_err, reg);
        }

        /* PA_INIT_ERROR is fatal and needs UIC reset */
        reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DATA_LINK_LAYER);
        if (reg)
                ufshcd_update_uic_reg_hist(&hba->ufs_stats.dl_err, reg);

        if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT)
                hba->uic_error |= UFSHCD_UIC_DL_PA_INIT_ERROR;
        else if (hba->dev_quirks &
                   UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) {
                if (reg & UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED)
                        hba->uic_error |=
                                UFSHCD_UIC_DL_NAC_RECEIVED_ERROR;
                else if (reg & UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT)
                        hba->uic_error |= UFSHCD_UIC_DL_TCx_REPLAY_ERROR;
        }

        /* UIC NL/TL/DME errors needs software retry */
        reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_NETWORK_LAYER);
        if (reg) {
                ufshcd_update_uic_reg_hist(&hba->ufs_stats.nl_err, reg);
                hba->uic_error |= UFSHCD_UIC_NL_ERROR;
        }

        reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_TRANSPORT_LAYER);
        if (reg) {
                ufshcd_update_uic_reg_hist(&hba->ufs_stats.tl_err, reg);
                hba->uic_error |= UFSHCD_UIC_TL_ERROR;
        }

        reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DME);
        if (reg) {
                ufshcd_update_uic_reg_hist(&hba->ufs_stats.dme_err, reg);
                hba->uic_error |= UFSHCD_UIC_DME_ERROR;
        }

        dev_dbg(hba->dev, "%s: UIC error flags = 0x%08x\n",
                        __func__, hba->uic_error);
}

/**
 * ufshcd_check_errors - Check for errors that need s/w attention
 * @hba: per-adapter instance
 */
static void ufshcd_check_errors(struct ufs_hba *hba)
{
        bool queue_eh_work = false;

        if (hba->errors & INT_FATAL_ERRORS)
                queue_eh_work = true;

        if (hba->errors & UIC_ERROR) {
                hba->uic_error = 0;
                ufshcd_update_uic_error(hba);
                if (hba->uic_error)
                        queue_eh_work = true;
        }

        if (queue_eh_work) {
                /*
                 * update the transfer error masks to sticky bits, let's do this
                 * irrespective of current ufshcd_state.
                 */
                hba->saved_err |= hba->errors;
                hba->saved_uic_err |= hba->uic_error;

                /* handle fatal errors only when link is functional */
                if (hba->ufshcd_state == UFSHCD_STATE_OPERATIONAL) {
                        /* block commands from scsi mid-layer */
                        scsi_block_requests(hba->host);

                        hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED;

                        /* dump controller state before resetting */
                        if (hba->saved_err & (INT_FATAL_ERRORS | UIC_ERROR)) {
                                bool pr_prdt = !!(hba->saved_err &
                                                SYSTEM_BUS_FATAL_ERROR);

                                dev_err(hba->dev, "%s: saved_err 0x%x saved_uic_err 0x%x\n",
                                        __func__, hba->saved_err,
                                        hba->saved_uic_err);

                                ufshcd_print_host_regs(hba);
                                ufshcd_print_pwr_info(hba);
                                ufshcd_print_tmrs(hba, hba->outstanding_tasks);
                                ufshcd_print_trs(hba, hba->outstanding_reqs,
                                                        pr_prdt);
                        }
                        schedule_work(&hba->eh_work);
                }
        }
        /*
         * if (!queue_eh_work) -
         * Other errors are either non-fatal where host recovers
         * itself without s/w intervention or errors that will be
         * handled by the SCSI core layer.
         */
}

/**
 * ufshcd_tmc_handler - handle task management function completion
 * @hba: per adapter instance
 */
static void ufshcd_tmc_handler(struct ufs_hba *hba)
{
        u32 tm_doorbell;

        tm_doorbell = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL);
        hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks;
        wake_up(&hba->tm_wq);
}

/**
 * ufshcd_sl_intr - Interrupt service routine
 * @hba: per adapter instance
 * @intr_status: contains interrupts generated by the controller
 */
static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
{
        hba->errors = UFSHCD_ERROR_MASK & intr_status;
        if (hba->errors)
                ufshcd_check_errors(hba);

        if (intr_status & UFSHCD_UIC_MASK)
                ufshcd_uic_cmd_compl(hba, intr_status);

        if (intr_status & UTP_TASK_REQ_COMPL)
                ufshcd_tmc_handler(hba);

        if (intr_status & UTP_TRANSFER_REQ_COMPL)
                ufshcd_transfer_req_compl(hba);
}

/**
 * ufshcd_intr - Main interrupt service routine
 * @irq: irq number
 * @__hba: pointer to adapter instance
 *
 * Returns IRQ_HANDLED - If interrupt is valid
 *              IRQ_NONE - If invalid interrupt
 */
static irqreturn_t ufshcd_intr(int irq, void *__hba)
{
        u32 intr_status, enabled_intr_status;
        irqreturn_t retval = IRQ_NONE;
        struct ufs_hba *hba = __hba;

        spin_lock(hba->host->host_lock);
        intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
        enabled_intr_status =
                intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE);

        if (intr_status)
                ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS);

        if (enabled_intr_status) {
                ufshcd_sl_intr(hba, enabled_intr_status);
                retval = IRQ_HANDLED;
        }
        spin_unlock(hba->host->host_lock);
        return retval;
}

static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag)
{
        int err = 0;
        u32 mask = 1 << tag;
        unsigned long flags;

        if (!test_bit(tag, &hba->outstanding_tasks))
                goto out;

        spin_lock_irqsave(hba->host->host_lock, flags);
        ufshcd_writel(hba, ~(1 << tag), REG_UTP_TASK_REQ_LIST_CLEAR);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        /* poll for max. 1 sec to clear door bell register by h/w */
        err = ufshcd_wait_for_register(hba,
                        REG_UTP_TASK_REQ_DOOR_BELL,
                        mask, 0, 1000, 1000, true);
out:
        return err;
}

/**
 * ufshcd_issue_tm_cmd - issues task management commands to controller
 * @hba: per adapter instance
 * @lun_id: LUN ID to which TM command is sent
 * @task_id: task ID to which the TM command is applicable
 * @tm_function: task management function opcode
 * @tm_response: task management service response return value
 *
 * Returns non-zero value on error, zero on success.
 */
static int ufshcd_issue_tm_cmd(struct ufs_hba *hba, int lun_id, int task_id,
                u8 tm_function, u8 *tm_response)
{
        struct utp_task_req_desc *task_req_descp;
        struct utp_upiu_task_req *task_req_upiup;
        struct Scsi_Host *host;
        unsigned long flags;
        int free_slot;
        int err;
        int task_tag;

        host = hba->host;

        /*
         * Get free slot, sleep if slots are unavailable.
         * Even though we use wait_event() which sleeps indefinitely,
         * the maximum wait time is bounded by %TM_CMD_TIMEOUT.
         */
        wait_event(hba->tm_tag_wq, ufshcd_get_tm_free_slot(hba, &free_slot));
        ufshcd_hold(hba, false);

        spin_lock_irqsave(host->host_lock, flags);
        task_req_descp = hba->utmrdl_base_addr;
        task_req_descp += free_slot;

        /* Configure task request descriptor */
        task_req_descp->header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD);
        task_req_descp->header.dword_2 =
                        cpu_to_le32(OCS_INVALID_COMMAND_STATUS);

        /* Configure task request UPIU */
        task_req_upiup =
                (struct utp_upiu_task_req *) task_req_descp->task_req_upiu;
        task_tag = hba->nutrs + free_slot;
        task_req_upiup->header.dword_0 =
                UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0,
                                              lun_id, task_tag);
        task_req_upiup->header.dword_1 =
                UPIU_HEADER_DWORD(0, tm_function, 0, 0);
        /*
         * The host shall provide the same value for LUN field in the basic
         * header and for Input Parameter.
         */
        task_req_upiup->input_param1 = cpu_to_be32(lun_id);
        task_req_upiup->input_param2 = cpu_to_be32(task_id);

        ufshcd_vops_setup_task_mgmt(hba, free_slot, tm_function);

        /* send command to the controller */
        __set_bit(free_slot, &hba->outstanding_tasks);

        /* Make sure descriptors are ready before ringing the task doorbell */
        wmb();

        ufshcd_writel(hba, 1 << free_slot, REG_UTP_TASK_REQ_DOOR_BELL);
        /* Make sure that doorbell is committed immediately */
        wmb();

        spin_unlock_irqrestore(host->host_lock, flags);

        /* wait until the task management command is completed */
        err = wait_event_timeout(hba->tm_wq,
                        test_bit(free_slot, &hba->tm_condition),
                        msecs_to_jiffies(TM_CMD_TIMEOUT));
        if (!err) {
                dev_err(hba->dev, "%s: task management cmd 0x%.2x timed-out\n",
                                __func__, tm_function);
                if (ufshcd_clear_tm_cmd(hba, free_slot))
                        dev_WARN(hba->dev, "%s: unable clear tm cmd (slot %d) after timeout\n",
                                        __func__, free_slot);
                err = -ETIMEDOUT;
        } else {
                err = ufshcd_task_req_compl(hba, free_slot, tm_response);
        }

        clear_bit(free_slot, &hba->tm_condition);
        ufshcd_put_tm_slot(hba, free_slot);
        wake_up(&hba->tm_tag_wq);

        ufshcd_release(hba);
        return err;
}

/**
 * ufshcd_eh_device_reset_handler - device reset handler registered to
 *                                    scsi layer.
 * @cmd: SCSI command pointer
 *
 * Returns SUCCESS/FAILED
 */
static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
{
        struct Scsi_Host *host;
        struct ufs_hba *hba;
        unsigned int tag;
        u32 pos;
        int err;
        u8 resp = 0xF;
        struct ufshcd_lrb *lrbp;
        unsigned long flags;

        host = cmd->device->host;
        hba = shost_priv(host);
        tag = cmd->request->tag;

        lrbp = &hba->lrb[tag];
        err = ufshcd_issue_tm_cmd(hba, lrbp->lun, 0, UFS_LOGICAL_RESET, &resp);
        if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
                if (!err)
                        err = resp;
                goto out;
        }

        /* clear the commands that were pending for corresponding LUN */
        for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) {
                if (hba->lrb[pos].lun == lrbp->lun) {
                        err = ufshcd_clear_cmd(hba, pos);
                        if (err)
                                break;
                }
        }
        spin_lock_irqsave(host->host_lock, flags);
        ufshcd_transfer_req_compl(hba);
        spin_unlock_irqrestore(host->host_lock, flags);

out:
        hba->req_abort_count = 0;
        if (!err) {
                err = SUCCESS;
        } else {
                dev_err(hba->dev, "%s: failed with err %d\n", __func__, err);
                err = FAILED;
        }
        return err;
}

static void ufshcd_set_req_abort_skip(struct ufs_hba *hba, unsigned long bitmap)
{
        struct ufshcd_lrb *lrbp;
        int tag;

        for_each_set_bit(tag, &bitmap, hba->nutrs) {
                lrbp = &hba->lrb[tag];
                lrbp->req_abort_skip = true;
        }
}

/**
 * ufshcd_abort - abort a specific command
 * @cmd: SCSI command pointer
 *
 * Abort the pending command in device by sending UFS_ABORT_TASK task management
 * command, and in host controller by clearing the door-bell register. There can
 * be race between controller sending the command to the device while abort is
 * issued. To avoid that, first issue UFS_QUERY_TASK to check if the command is
 * really issued and then try to abort it.
 *
 * Returns SUCCESS/FAILED
 */
static int ufshcd_abort(struct scsi_cmnd *cmd)
{
        struct Scsi_Host *host;
        struct ufs_hba *hba;
        unsigned long flags;
        unsigned int tag;
        int err = 0;
        int poll_cnt;
        u8 resp = 0xF;
        struct ufshcd_lrb *lrbp;
        u32 reg;

        host = cmd->device->host;
        hba = shost_priv(host);
        tag = cmd->request->tag;
        lrbp = &hba->lrb[tag];
        if (!ufshcd_valid_tag(hba, tag)) {
                dev_err(hba->dev,
                        "%s: invalid command tag %d: cmd=0x%p, cmd->request=0x%p",
                        __func__, tag, cmd, cmd->request);
                BUG();
        }

        /*
         * Task abort to the device W-LUN is illegal. When this command
         * will fail, due to spec violation, scsi err handling next step
         * will be to send LU reset which, again, is a spec violation.
         * To avoid these unnecessary/illegal step we skip to the last error
         * handling stage: reset and restore.
         */
        if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN)
                return ufshcd_eh_host_reset_handler(cmd);

        ufshcd_hold(hba, false);
        reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
        /* If command is already aborted/completed, return SUCCESS */
        if (!(test_bit(tag, &hba->outstanding_reqs))) {
                dev_err(hba->dev,
                        "%s: cmd at tag %d already completed, outstanding=0x%lx, doorbell=0x%x\n",
                        __func__, tag, hba->outstanding_reqs, reg);
                goto out;
        }

        if (!(reg & (1 << tag))) {
                dev_err(hba->dev,
                "%s: cmd was completed, but without a notifying intr, tag = %d",
                __func__, tag);
        }

        /* Print Transfer Request of aborted task */
        dev_err(hba->dev, "%s: Device abort task at tag %d\n", __func__, tag);

        /*
         * Print detailed info about aborted request.
         * As more than one request might get aborted at the same time,
         * print full information only for the first aborted request in order
         * to reduce repeated printouts. For other aborted requests only print
         * basic details.
         */
        scsi_print_command(hba->lrb[tag].cmd);
        if (!hba->req_abort_count) {
                ufshcd_print_host_regs(hba);
                ufshcd_print_host_state(hba);
                ufshcd_print_pwr_info(hba);
                ufshcd_print_trs(hba, 1 << tag, true);
        } else {
                ufshcd_print_trs(hba, 1 << tag, false);
        }
        hba->req_abort_count++;

        /* Skip task abort in case previous aborts failed and report failure */
        if (lrbp->req_abort_skip) {
                err = -EIO;
                goto out;
        }

        for (poll_cnt = 100; poll_cnt; poll_cnt--) {
                err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag,
                                UFS_QUERY_TASK, &resp);
                if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) {
                        /* cmd pending in the device */
                        dev_err(hba->dev, "%s: cmd pending in the device. tag = %d\n",
                                __func__, tag);
                        break;
                } else if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
                        /*
                         * cmd not pending in the device, check if it is
                         * in transition.
                         */
                        dev_err(hba->dev, "%s: cmd at tag %d not pending in the device.\n",
                                __func__, tag);
                        reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
                        if (reg & (1 << tag)) {
                                /* sleep for max. 200us to stabilize */
                                usleep_range(100, 200);
                                continue;
                        }
                        /* command completed already */
                        dev_err(hba->dev, "%s: cmd at tag %d successfully cleared from DB.\n",
                                __func__, tag);
                        goto out;
                } else {
                        dev_err(hba->dev,
                                "%s: no response from device. tag = %d, err %d\n",
                                __func__, tag, err);
                        if (!err)
                                err = resp; /* service response error */
                        goto out;
                }
        }

        if (!poll_cnt) {
                err = -EBUSY;
                goto out;
        }

        err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag,
                        UFS_ABORT_TASK, &resp);
        if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
                if (!err) {
                        err = resp; /* service response error */
                        dev_err(hba->dev, "%s: issued. tag = %d, err %d\n",
                                __func__, tag, err);
                }
                goto out;
        }

        err = ufshcd_clear_cmd(hba, tag);
        if (err) {
                dev_err(hba->dev, "%s: Failed clearing cmd at tag %d, err %d\n",
                        __func__, tag, err);
                goto out;
        }

        scsi_dma_unmap(cmd);

        spin_lock_irqsave(host->host_lock, flags);
        ufshcd_outstanding_req_clear(hba, tag);
        hba->lrb[tag].cmd = NULL;
        spin_unlock_irqrestore(host->host_lock, flags);

        clear_bit_unlock(tag, &hba->lrb_in_use);
        wake_up(&hba->dev_cmd.tag_wq);

out:
        if (!err) {
                err = SUCCESS;
        } else {
                dev_err(hba->dev, "%s: failed with err %d\n", __func__, err);
                ufshcd_set_req_abort_skip(hba, hba->outstanding_reqs);
                err = FAILED;
        }

        /*
         * This ufshcd_release() corresponds to the original scsi cmd that got
         * aborted here (as we won't get any IRQ for it).
         */
        ufshcd_release(hba);
        return err;
}

/**
 * ufshcd_host_reset_and_restore - reset and restore host controller
 * @hba: per-adapter instance
 *
 * Note that host controller reset may issue DME_RESET to
 * local and remote (device) Uni-Pro stack and the attributes
 * are reset to default state.
 *
 * Returns zero on success, non-zero on failure
 */
static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
{
        int err;
        unsigned long flags;

        /* Reset the host controller */
        spin_lock_irqsave(hba->host->host_lock, flags);
        ufshcd_hba_stop(hba, false);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        /* scale up clocks to max frequency before full reinitialization */
        ufshcd_scale_clks(hba, true);

        err = ufshcd_hba_enable(hba);
        if (err)
                goto out;

        /* Establish the link again and restore the device */
        err = ufshcd_probe_hba(hba);

        if (!err && (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL))
                err = -EIO;
out:
        if (err)
                dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err);

        return err;
}

/**
 * ufshcd_reset_and_restore - reset and re-initialize host/device
 * @hba: per-adapter instance
 *
 * Reset and recover device, host and re-establish link. This
 * is helpful to recover the communication in fatal error conditions.
 *
 * Returns zero on success, non-zero on failure
 */
static int ufshcd_reset_and_restore(struct ufs_hba *hba)
{
        int err = 0;
        unsigned long flags;
        int retries = MAX_HOST_RESET_RETRIES;

        do {
                err = ufshcd_host_reset_and_restore(hba);
        } while (err && --retries);

        /*
         * After reset the door-bell might be cleared, complete
         * outstanding requests in s/w here.
         */
        spin_lock_irqsave(hba->host->host_lock, flags);
        ufshcd_transfer_req_compl(hba);
        ufshcd_tmc_handler(hba);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        return err;
}

/**
 * ufshcd_eh_host_reset_handler - host reset handler registered to scsi layer
 * @cmd - SCSI command pointer
 *
 * Returns SUCCESS/FAILED
 */
static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd)
{
        int err;
        unsigned long flags;
        struct ufs_hba *hba;

        hba = shost_priv(cmd->device->host);

        ufshcd_hold(hba, false);
        /*
         * Check if there is any race with fatal error handling.
         * If so, wait for it to complete. Even though fatal error
         * handling does reset and restore in some cases, don't assume
         * anything out of it. We are just avoiding race here.
         */
        do {
                spin_lock_irqsave(hba->host->host_lock, flags);
                if (!(work_pending(&hba->eh_work) ||
                                hba->ufshcd_state == UFSHCD_STATE_RESET))
                        break;
                spin_unlock_irqrestore(hba->host->host_lock, flags);
                dev_dbg(hba->dev, "%s: reset in progress\n", __func__);
                flush_work(&hba->eh_work);
        } while (1);

        hba->ufshcd_state = UFSHCD_STATE_RESET;
        ufshcd_set_eh_in_progress(hba);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        err = ufshcd_reset_and_restore(hba);

        spin_lock_irqsave(hba->host->host_lock, flags);
        if (!err) {
                err = SUCCESS;
                hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
        } else {
                err = FAILED;
                hba->ufshcd_state = UFSHCD_STATE_ERROR;
        }
        ufshcd_clear_eh_in_progress(hba);
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        ufshcd_release(hba);
        return err;
}

/**
 * ufshcd_get_max_icc_level - calculate the ICC level
 * @sup_curr_uA: max. current supported by the regulator
 * @start_scan: row at the desc table to start scan from
 * @buff: power descriptor buffer
 *
 * Returns calculated max ICC level for specific regulator
 */
static u32 ufshcd_get_max_icc_level(int sup_curr_uA, u32 start_scan, char *buff)
{
        int i;
        int curr_uA;
        u16 data;
        u16 unit;

        for (i = start_scan; i >= 0; i--) {
                data = be16_to_cpup((__be16 *)&buff[2 * i]);
                unit = (data & ATTR_ICC_LVL_UNIT_MASK) >>
                                                ATTR_ICC_LVL_UNIT_OFFSET;
                curr_uA = data & ATTR_ICC_LVL_VALUE_MASK;
                switch (unit) {
                case UFSHCD_NANO_AMP:
                        curr_uA = curr_uA / 1000;
                        break;
                case UFSHCD_MILI_AMP:
                        curr_uA = curr_uA * 1000;
                        break;
                case UFSHCD_AMP:
                        curr_uA = curr_uA * 1000 * 1000;
                        break;
                case UFSHCD_MICRO_AMP:
                default:
                        break;
                }
                if (sup_curr_uA >= curr_uA)
                        break;
        }
        if (i < 0) {
                i = 0;
                pr_err("%s: Couldn't find valid icc_level = %d", __func__, i);
        }

        return (u32)i;
}

/**
 * ufshcd_calc_icc_level - calculate the max ICC level
 * In case regulators are not initialized we'll return 0
 * @hba: per-adapter instance
 * @desc_buf: power descriptor buffer to extract ICC levels from.
 * @len: length of desc_buff
 *
 * Returns calculated ICC level
 */
static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba,
                                                        u8 *desc_buf, int len)
{
        u32 icc_level = 0;

        if (!hba->vreg_info.vcc || !hba->vreg_info.vccq ||
                                                !hba->vreg_info.vccq2) {
                dev_err(hba->dev,
                        "%s: Regulator capability was not set, actvIccLevel=%d",
                                                        __func__, icc_level);
                goto out;
        }

        if (hba->vreg_info.vcc)
                icc_level = ufshcd_get_max_icc_level(
                                hba->vreg_info.vcc->max_uA,
                                POWER_DESC_MAX_ACTV_ICC_LVLS - 1,
                                &desc_buf[PWR_DESC_ACTIVE_LVLS_VCC_0]);

        if (hba->vreg_info.vccq)
                icc_level = ufshcd_get_max_icc_level(
                                hba->vreg_info.vccq->max_uA,
                                icc_level,
                                &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ_0]);

        if (hba->vreg_info.vccq2)
                icc_level = ufshcd_get_max_icc_level(
                                hba->vreg_info.vccq2->max_uA,
                                icc_level,
                                &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ2_0]);
out:
        return icc_level;
}

static void ufshcd_init_icc_levels(struct ufs_hba *hba)
{
        int ret;
        int buff_len = hba->desc_size.pwr_desc;
        u8 desc_buf[hba->desc_size.pwr_desc];

        ret = ufshcd_read_power_desc(hba, desc_buf, buff_len);
        if (ret) {
                dev_err(hba->dev,
                        "%s: Failed reading power descriptor.len = %d ret = %d",
                        __func__, buff_len, ret);
                return;
        }

        hba->init_prefetch_data.icc_level =
                        ufshcd_find_max_sup_active_icc_level(hba,
                        desc_buf, buff_len);
        dev_dbg(hba->dev, "%s: setting icc_level 0x%x",
                        __func__, hba->init_prefetch_data.icc_level);

        ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
                QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0,
                &hba->init_prefetch_data.icc_level);

        if (ret)
                dev_err(hba->dev,
                        "%s: Failed configuring bActiveICCLevel = %d ret = %d",
                        __func__, hba->init_prefetch_data.icc_level , ret);

}

/**
 * ufshcd_scsi_add_wlus - Adds required W-LUs
 * @hba: per-adapter instance
 *
 * UFS device specification requires the UFS devices to support 4 well known
 * logical units:
 *      "REPORT_LUNS" (address: 01h)
 *      "UFS Device" (address: 50h)
 *      "RPMB" (address: 44h)
 *      "BOOT" (address: 30h)
 * UFS device's power management needs to be controlled by "POWER CONDITION"
 * field of SSU (START STOP UNIT) command. But this "power condition" field
 * will take effect only when its sent to "UFS device" well known logical unit
 * hence we require the scsi_device instance to represent this logical unit in
 * order for the UFS host driver to send the SSU command for power management.

 * We also require the scsi_device instance for "RPMB" (Replay Protected Memory
 * Block) LU so user space process can control this LU. User space may also
 * want to have access to BOOT LU.

 * This function adds scsi device instances for each of all well known LUs
 * (except "REPORT LUNS" LU).
 *
 * Returns zero on success (all required W-LUs are added successfully),
 * non-zero error value on failure (if failed to add any of the required W-LU).
 */
static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
{
        int ret = 0;
        struct scsi_device *sdev_rpmb;
        struct scsi_device *sdev_boot;

        hba->sdev_ufs_device = __scsi_add_device(hba->host, 0, 0,
                ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN), NULL);
        if (IS_ERR(hba->sdev_ufs_device)) {
                ret = PTR_ERR(hba->sdev_ufs_device);
                hba->sdev_ufs_device = NULL;
                goto out;
        }
        scsi_device_put(hba->sdev_ufs_device);

        sdev_boot = __scsi_add_device(hba->host, 0, 0,
                ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL);
        if (IS_ERR(sdev_boot)) {
                ret = PTR_ERR(sdev_boot);
                goto remove_sdev_ufs_device;
        }
        scsi_device_put(sdev_boot);

        sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
                ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL);
        if (IS_ERR(sdev_rpmb)) {
                ret = PTR_ERR(sdev_rpmb);
                goto remove_sdev_boot;
        }
        scsi_device_put(sdev_rpmb);
        goto out;

remove_sdev_boot:
        scsi_remove_device(sdev_boot);
remove_sdev_ufs_device:
        scsi_remove_device(hba->sdev_ufs_device);
out:
        return ret;
}

static int ufs_get_device_desc(struct ufs_hba *hba,
                               struct ufs_dev_desc *dev_desc)
{
        int err;
        u8 model_index;
        u8 str_desc_buf[QUERY_DESC_MAX_SIZE + 1] = {0};
        u8 desc_buf[hba->desc_size.dev_desc];

        err = ufshcd_read_device_desc(hba, desc_buf, hba->desc_size.dev_desc);
        if (err) {
                dev_err(hba->dev, "%s: Failed reading Device Desc. err = %d\n",
                        __func__, err);
                goto out;
        }

        /*
         * getting vendor (manufacturerID) and Bank Index in big endian
         * format
         */
        dev_desc->wmanufacturerid = desc_buf[DEVICE_DESC_PARAM_MANF_ID] << 8 |
                                     desc_buf[DEVICE_DESC_PARAM_MANF_ID + 1];

        model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];

        err = ufshcd_read_string_desc(hba, model_index, str_desc_buf,
                                QUERY_DESC_MAX_SIZE, ASCII_STD);
        if (err) {
                dev_err(hba->dev, "%s: Failed reading Product Name. err = %d\n",
                        __func__, err);
                goto out;
        }

        str_desc_buf[QUERY_DESC_MAX_SIZE] = '\0';
        strlcpy(dev_desc->model, (str_desc_buf + QUERY_DESC_HDR_SIZE),
                min_t(u8, str_desc_buf[QUERY_DESC_LENGTH_OFFSET],
                      MAX_MODEL_LEN));

        /* Null terminate the model string */
        dev_desc->model[MAX_MODEL_LEN] = '\0';

out:
        return err;
}

static void ufs_fixup_device_setup(struct ufs_hba *hba,
                                   struct ufs_dev_desc *dev_desc)
{
        struct ufs_dev_fix *f;

        for (f = ufs_fixups; f->quirk; f++) {
                if ((f->card.wmanufacturerid == dev_desc->wmanufacturerid ||
                     f->card.wmanufacturerid == UFS_ANY_VENDOR) &&
                    (STR_PRFX_EQUAL(f->card.model, dev_desc->model) ||
                     !strcmp(f->card.model, UFS_ANY_MODEL)))
                        hba->dev_quirks |= f->quirk;
        }
}

/**
 * ufshcd_tune_pa_tactivate - Tunes PA_TActivate of local UniPro
 * @hba: per-adapter instance
 *
 * PA_TActivate parameter can be tuned manually if UniPro version is less than
 * 1.61. PA_TActivate needs to be greater than or equal to peerM-PHY's
 * RX_MIN_ACTIVATETIME_CAPABILITY attribute. This optimal value can help reduce
 * the hibern8 exit latency.
 *
 * Returns zero on success, non-zero error value on failure.
 */
static int ufshcd_tune_pa_tactivate(struct ufs_hba *hba)
{
        int ret = 0;
        u32 peer_rx_min_activatetime = 0, tuned_pa_tactivate;

        ret = ufshcd_dme_peer_get(hba,
                                  UIC_ARG_MIB_SEL(
                                        RX_MIN_ACTIVATETIME_CAPABILITY,
                                        UIC_ARG_MPHY_RX_GEN_SEL_INDEX(0)),
                                  &peer_rx_min_activatetime);
        if (ret)
                goto out;

        /* make sure proper unit conversion is applied */
        tuned_pa_tactivate =
                ((peer_rx_min_activatetime * RX_MIN_ACTIVATETIME_UNIT_US)
                 / PA_TACTIVATE_TIME_UNIT_US);
        ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE),
                             tuned_pa_tactivate);

out:
        return ret;
}

/**
 * ufshcd_tune_pa_hibern8time - Tunes PA_Hibern8Time of local UniPro
 * @hba: per-adapter instance
 *
 * PA_Hibern8Time parameter can be tuned manually if UniPro version is less than
 * 1.61. PA_Hibern8Time needs to be maximum of local M-PHY's
 * TX_HIBERN8TIME_CAPABILITY & peer M-PHY's RX_HIBERN8TIME_CAPABILITY.
 * This optimal value can help reduce the hibern8 exit latency.
 *
 * Returns zero on success, non-zero error value on failure.
 */
static int ufshcd_tune_pa_hibern8time(struct ufs_hba *hba)
{
        int ret = 0;
        u32 local_tx_hibern8_time_cap = 0, peer_rx_hibern8_time_cap = 0;
        u32 max_hibern8_time, tuned_pa_hibern8time;

        ret = ufshcd_dme_get(hba,
                             UIC_ARG_MIB_SEL(TX_HIBERN8TIME_CAPABILITY,
                                        UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
                                  &local_tx_hibern8_time_cap);
        if (ret)
                goto out;

        ret = ufshcd_dme_peer_get(hba,
                                  UIC_ARG_MIB_SEL(RX_HIBERN8TIME_CAPABILITY,
                                        UIC_ARG_MPHY_RX_GEN_SEL_INDEX(0)),
                                  &peer_rx_hibern8_time_cap);
        if (ret)
                goto out;

        max_hibern8_time = max(local_tx_hibern8_time_cap,
                               peer_rx_hibern8_time_cap);
        /* make sure proper unit conversion is applied */
        tuned_pa_hibern8time = ((max_hibern8_time * HIBERN8TIME_UNIT_US)
                                / PA_HIBERN8_TIME_UNIT_US);
        ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HIBERN8TIME),
                             tuned_pa_hibern8time);
out:
        return ret;
}

/**
 * ufshcd_quirk_tune_host_pa_tactivate - Ensures that host PA_TACTIVATE is
 * less than device PA_TACTIVATE time.
 * @hba: per-adapter instance
 *
 * Some UFS devices require host PA_TACTIVATE to be lower than device
 * PA_TACTIVATE, we need to enable UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE quirk
 * for such devices.
 *
 * Returns zero on success, non-zero error value on failure.
 */
static int ufshcd_quirk_tune_host_pa_tactivate(struct ufs_hba *hba)
{
        int ret = 0;
        u32 granularity, peer_granularity;
        u32 pa_tactivate, peer_pa_tactivate;
        u32 pa_tactivate_us, peer_pa_tactivate_us;
        u8 gran_to_us_table[] = {1, 4, 8, 16, 32, 100};

        ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_GRANULARITY),
                                  &granularity);
        if (ret)
                goto out;

        ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY),
                                  &peer_granularity);
        if (ret)
                goto out;

        if ((granularity < PA_GRANULARITY_MIN_VAL) ||
            (granularity > PA_GRANULARITY_MAX_VAL)) {
                dev_err(hba->dev, "%s: invalid host PA_GRANULARITY %d",
                        __func__, granularity);
                return -EINVAL;
        }

        if ((peer_granularity < PA_GRANULARITY_MIN_VAL) ||
            (peer_granularity > PA_GRANULARITY_MAX_VAL)) {
                dev_err(hba->dev, "%s: invalid device PA_GRANULARITY %d",
                        __func__, peer_granularity);
                return -EINVAL;
        }

        ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &pa_tactivate);
        if (ret)
                goto out;

        ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_TACTIVATE),
                                  &peer_pa_tactivate);
        if (ret)
                goto out;

        pa_tactivate_us = pa_tactivate * gran_to_us_table[granularity - 1];
        peer_pa_tactivate_us = peer_pa_tactivate *
                             gran_to_us_table[peer_granularity - 1];

        if (pa_tactivate_us > peer_pa_tactivate_us) {
                u32 new_peer_pa_tactivate;

                new_peer_pa_tactivate = pa_tactivate_us /
                                      gran_to_us_table[peer_granularity - 1];
                new_peer_pa_tactivate++;
                ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(PA_TACTIVATE),
                                          new_peer_pa_tactivate);
        }

out:
        return ret;
}

static void ufshcd_tune_unipro_params(struct ufs_hba *hba)
{
        if (ufshcd_is_unipro_pa_params_tuning_req(hba)) {
                ufshcd_tune_pa_tactivate(hba);
                ufshcd_tune_pa_hibern8time(hba);
        }

        if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_TACTIVATE)
                /* set 1ms timeout for PA_TACTIVATE */
                ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), 10);

        if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE)
                ufshcd_quirk_tune_host_pa_tactivate(hba);

        ufshcd_vops_apply_dev_quirks(hba);
}

static void ufshcd_clear_dbg_ufs_stats(struct ufs_hba *hba)
{
        int err_reg_hist_size = sizeof(struct ufs_uic_err_reg_hist);

        hba->ufs_stats.hibern8_exit_cnt = 0;
        hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0);

        memset(&hba->ufs_stats.pa_err, 0, err_reg_hist_size);
        memset(&hba->ufs_stats.dl_err, 0, err_reg_hist_size);
        memset(&hba->ufs_stats.nl_err, 0, err_reg_hist_size);
        memset(&hba->ufs_stats.tl_err, 0, err_reg_hist_size);
        memset(&hba->ufs_stats.dme_err, 0, err_reg_hist_size);

        hba->req_abort_count = 0;
}

static void ufshcd_init_desc_sizes(struct ufs_hba *hba)
{
        int err;

        err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_DEVICE, 0,
                &hba->desc_size.dev_desc);
        if (err)
                hba->desc_size.dev_desc = QUERY_DESC_DEVICE_DEF_SIZE;

        err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_POWER, 0,
                &hba->desc_size.pwr_desc);
        if (err)
                hba->desc_size.pwr_desc = QUERY_DESC_POWER_DEF_SIZE;

        err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_INTERCONNECT, 0,
                &hba->desc_size.interc_desc);
        if (err)
                hba->desc_size.interc_desc = QUERY_DESC_INTERCONNECT_DEF_SIZE;

        err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_CONFIGURATION, 0,
                &hba->desc_size.conf_desc);
        if (err)
                hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE;

        err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_UNIT, 0,
                &hba->desc_size.unit_desc);
        if (err)
                hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE;

        err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_GEOMETRY, 0,
                &hba->desc_size.geom_desc);
        if (err)
                hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE;
}

static void ufshcd_def_desc_sizes(struct ufs_hba *hba)
{
        hba->desc_size.dev_desc = QUERY_DESC_DEVICE_DEF_SIZE;
        hba->desc_size.pwr_desc = QUERY_DESC_POWER_DEF_SIZE;
        hba->desc_size.interc_desc = QUERY_DESC_INTERCONNECT_DEF_SIZE;
        hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE;
        hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE;
        hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE;
}

/**
 * ufshcd_probe_hba - probe hba to detect device and initialize
 * @hba: per-adapter instance
 *
 * Execute link-startup and verify device initialization
 */
static int ufshcd_probe_hba(struct ufs_hba *hba)
{
        struct ufs_dev_desc card = {0};
        int ret;
        ktime_t start = ktime_get();

        ret = ufshcd_link_startup(hba);
        if (ret)
                goto out;

        /* set the default level for urgent bkops */
        hba->urgent_bkops_lvl = BKOPS_STATUS_PERF_IMPACT;
        hba->is_urgent_bkops_lvl_checked = false;

        /* Debug counters initialization */
        ufshcd_clear_dbg_ufs_stats(hba);

        /* UniPro link is active now */
        ufshcd_set_link_active(hba);

        ret = ufshcd_verify_dev_init(hba);
        if (ret)
                goto out;

        ret = ufshcd_complete_dev_init(hba);
        if (ret)
                goto out;

        /* Init check for device descriptor sizes */
        ufshcd_init_desc_sizes(hba);

        ret = ufs_get_device_desc(hba, &card);
        if (ret) {
                dev_err(hba->dev, "%s: Failed getting device info. err = %d\n",
                        __func__, ret);
                goto out;
        }

        ufs_fixup_device_setup(hba, &card);
        ufshcd_tune_unipro_params(hba);

        ret = ufshcd_set_vccq_rail_unused(hba,
                (hba->dev_quirks & UFS_DEVICE_NO_VCCQ) ? true : false);
        if (ret)
                goto out;

        /* UFS device is also active now */
        ufshcd_set_ufs_dev_active(hba);
        ufshcd_force_reset_auto_bkops(hba);
        hba->wlun_dev_clr_ua = true;

        if (ufshcd_get_max_pwr_mode(hba)) {
                dev_err(hba->dev,
                        "%s: Failed getting max supported power mode\n",
                        __func__);
        } else {
                ret = ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info);
                if (ret) {
                        dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n",
                                        __func__, ret);
                        goto out;
                }
        }

        /* set the state as operational after switching to desired gear */
        hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;

        /*
         * If we are in error handling context or in power management callbacks
         * context, no need to scan the host
         */
        if (!ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) {
                bool flag;

                /* clear any previous UFS device information */
                memset(&hba->dev_info, 0, sizeof(hba->dev_info));
                if (!ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG,
                                QUERY_FLAG_IDN_PWR_ON_WPE, &flag))
                        hba->dev_info.f_power_on_wp_en = flag;

                if (!hba->is_init_prefetch)
                        ufshcd_init_icc_levels(hba);

                /* Add required well known logical units to scsi mid layer */
                if (ufshcd_scsi_add_wlus(hba))
                        goto out;

                /* Initialize devfreq after UFS device is detected */
                if (ufshcd_is_clkscaling_supported(hba)) {
                        memcpy(&hba->clk_scaling.saved_pwr_info.info,
                                &hba->pwr_info,
                                sizeof(struct ufs_pa_layer_attr));
                        hba->clk_scaling.saved_pwr_info.is_valid = true;
                        if (!hba->devfreq) {
                                hba->devfreq = devm_devfreq_add_device(hba->dev,
                                                        &ufs_devfreq_profile,
                                                        "simple_ondemand",
                                                        NULL);
                                if (IS_ERR(hba->devfreq)) {
                                        ret = PTR_ERR(hba->devfreq);
                                        dev_err(hba->dev, "Unable to register with devfreq %d\n",
                                                        ret);
                                        goto out;
                                }
                        }
                        hba->clk_scaling.is_allowed = true;
                }

                scsi_scan_host(hba->host);
                pm_runtime_put_sync(hba->dev);
        }

        if (!hba->is_init_prefetch)
                hba->is_init_prefetch = true;

out:
        /*
         * If we failed to initialize the device or the device is not
         * present, turn off the power/clocks etc.
         */
        if (ret && !ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) {
                pm_runtime_put_sync(hba->dev);
                ufshcd_hba_exit(hba);
        }

        trace_ufshcd_init(dev_name(hba->dev), ret,
                ktime_to_us(ktime_sub(ktime_get(), start)),
                hba->curr_dev_pwr_mode, hba->uic_link_state);
        return ret;
}

/**
 * ufshcd_async_scan - asynchronous execution for probing hba
 * @data: data pointer to pass to this function
 * @cookie: cookie data
 */
static void ufshcd_async_scan(void *data, async_cookie_t cookie)
{
        struct ufs_hba *hba = (struct ufs_hba *)data;

        ufshcd_probe_hba(hba);
}

static enum blk_eh_timer_return ufshcd_eh_timed_out(struct scsi_cmnd *scmd)
{
        unsigned long flags;
        struct Scsi_Host *host;
        struct ufs_hba *hba;
        int index;
        bool found = false;

        if (!scmd || !scmd->device || !scmd->device->host)
                return BLK_EH_NOT_HANDLED;

        host = scmd->device->host;
        hba = shost_priv(host);
        if (!hba)
                return BLK_EH_NOT_HANDLED;

        spin_lock_irqsave(host->host_lock, flags);

        for_each_set_bit(index, &hba->outstanding_reqs, hba->nutrs) {
                if (hba->lrb[index].cmd == scmd) {
                        found = true;
                        break;
                }
        }

        spin_unlock_irqrestore(host->host_lock, flags);

        /*
         * Bypass SCSI error handling and reset the block layer timer if this
         * SCSI command was not actually dispatched to UFS driver, otherwise
         * let SCSI layer handle the error as usual.
         */
        return found ? BLK_EH_NOT_HANDLED : BLK_EH_RESET_TIMER;
}

static struct scsi_host_template ufshcd_driver_template = {
        .module                 = THIS_MODULE,
        .name                   = UFSHCD,
        .proc_name              = UFSHCD,
        .queuecommand           = ufshcd_queuecommand,
        .slave_alloc            = ufshcd_slave_alloc,
        .slave_configure        = ufshcd_slave_configure,
        .slave_destroy          = ufshcd_slave_destroy,
        .change_queue_depth     = ufshcd_change_queue_depth,
        .eh_abort_handler       = ufshcd_abort,
        .eh_device_reset_handler = ufshcd_eh_device_reset_handler,
        .eh_host_reset_handler   = ufshcd_eh_host_reset_handler,
        .eh_timed_out           = ufshcd_eh_timed_out,
        .this_id                = -1,
        .sg_tablesize           = SG_ALL,
        .cmd_per_lun            = UFSHCD_CMD_PER_LUN,
        .can_queue              = UFSHCD_CAN_QUEUE,
        .max_host_blocked       = 1,
        .track_queue_depth      = 1,
};

static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
                                   int ua)
{
        int ret;

        if (!vreg)
                return 0;

        ret = regulator_set_load(vreg->reg, ua);
        if (ret < 0) {
                dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n",
                                __func__, vreg->name, ua, ret);
        }

        return ret;
}

static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba,
                                         struct ufs_vreg *vreg)
{
        if (!vreg)
                return 0;
        else if (vreg->unused)
                return 0;
        else
                return ufshcd_config_vreg_load(hba->dev, vreg,
                                               UFS_VREG_LPM_LOAD_UA);
}

static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
                                         struct ufs_vreg *vreg)
{
        if (!vreg)
                return 0;
        else if (vreg->unused)
                return 0;
        else
                return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
}

static int ufshcd_config_vreg(struct device *dev,
                struct ufs_vreg *vreg, bool on)
{
        int ret = 0;
        struct regulator *reg = vreg->reg;
        const char *name = vreg->name;
        int min_uV, uA_load;

        BUG_ON(!vreg);

        if (regulator_count_voltages(reg) > 0) {
                min_uV = on ? vreg->min_uV : 0;
                ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
                if (ret) {
                        dev_err(dev, "%s: %s set voltage failed, err=%d\n",
                                        __func__, name, ret);
                        goto out;
                }

                uA_load = on ? vreg->max_uA : 0;
                ret = ufshcd_config_vreg_load(dev, vreg, uA_load);
                if (ret)
                        goto out;
        }
out:
        return ret;
}

static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg)
{
        int ret = 0;

        if (!vreg)
                goto out;
        else if (vreg->enabled || vreg->unused)
                goto out;

        ret = ufshcd_config_vreg(dev, vreg, true);
        if (!ret)
                ret = regulator_enable(vreg->reg);

        if (!ret)
                vreg->enabled = true;
        else
                dev_err(dev, "%s: %s enable failed, err=%d\n",
                                __func__, vreg->name, ret);
out:
        return ret;
}

static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg)
{
        int ret = 0;

        if (!vreg)
                goto out;
        else if (!vreg->enabled || vreg->unused)
                goto out;

        ret = regulator_disable(vreg->reg);

        if (!ret) {
                /* ignore errors on applying disable config */
                ufshcd_config_vreg(dev, vreg, false);
                vreg->enabled = false;
        } else {
                dev_err(dev, "%s: %s disable failed, err=%d\n",
                                __func__, vreg->name, ret);
        }
out:
        return ret;
}

static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on)
{
        int ret = 0;
        struct device *dev = hba->dev;
        struct ufs_vreg_info *info = &hba->vreg_info;

        if (!info)
                goto out;

        ret = ufshcd_toggle_vreg(dev, info->vcc, on);
        if (ret)
                goto out;

        ret = ufshcd_toggle_vreg(dev, info->vccq, on);
        if (ret)
                goto out;

        ret = ufshcd_toggle_vreg(dev, info->vccq2, on);
        if (ret)
                goto out;

out:
        if (ret) {
                ufshcd_toggle_vreg(dev, info->vccq2, false);
                ufshcd_toggle_vreg(dev, info->vccq, false);
                ufshcd_toggle_vreg(dev, info->vcc, false);
        }
        return ret;
}

static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on)
{
        struct ufs_vreg_info *info = &hba->vreg_info;

        if (info)
                return ufshcd_toggle_vreg(hba->dev, info->vdd_hba, on);

        return 0;
}

static int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg)
{
        int ret = 0;

        if (!vreg)
                goto out;

        vreg->reg = devm_regulator_get(dev, vreg->name);
        if (IS_ERR(vreg->reg)) {
                ret = PTR_ERR(vreg->reg);
                dev_err(dev, "%s: %s get failed, err=%d\n",
                                __func__, vreg->name, ret);
        }
out:
        return ret;
}

static int ufshcd_init_vreg(struct ufs_hba *hba)
{
        int ret = 0;
        struct device *dev = hba->dev;
        struct ufs_vreg_info *info = &hba->vreg_info;

        if (!info)
                goto out;

        ret = ufshcd_get_vreg(dev, info->vcc);
        if (ret)
                goto out;

        ret = ufshcd_get_vreg(dev, info->vccq);
        if (ret)
                goto out;

        ret = ufshcd_get_vreg(dev, info->vccq2);
out:
        return ret;
}

static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
{
        struct ufs_vreg_info *info = &hba->vreg_info;

        if (info)
                return ufshcd_get_vreg(hba->dev, info->vdd_hba);

        return 0;
}

static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused)
{
        int ret = 0;
        struct ufs_vreg_info *info = &hba->vreg_info;

        if (!info)
                goto out;
        else if (!info->vccq)
                goto out;

        if (unused) {
                /* shut off the rail here */
                ret = ufshcd_toggle_vreg(hba->dev, info->vccq, false);
                /*
                 * Mark this rail as no longer used, so it doesn't get enabled
                 * later by mistake
                 */
                if (!ret)
                        info->vccq->unused = true;
        } else {
                /*
                 * rail should have been already enabled hence just make sure
                 * that unused flag is cleared.
                 */
                info->vccq->unused = false;
        }
out:
        return ret;
}

static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
                                        bool skip_ref_clk)
{
        int ret = 0;
        struct ufs_clk_info *clki;
        struct list_head *head = &hba->clk_list_head;
        unsigned long flags;
        ktime_t start = ktime_get();
        bool clk_state_changed = false;

        if (!head || list_empty(head))
                goto out;

        ret = ufshcd_vops_setup_clocks(hba, on, PRE_CHANGE);
        if (ret)
                return ret;

        list_for_each_entry(clki, head, list) {
                if (!IS_ERR_OR_NULL(clki->clk)) {
                        if (skip_ref_clk && !strcmp(clki->name, "ref_clk"))
                                continue;

                        clk_state_changed = on ^ clki->enabled;
                        if (on && !clki->enabled) {
                                ret = clk_prepare_enable(clki->clk);
                                if (ret) {
                                        dev_err(hba->dev, "%s: %s prepare enable failed, %d\n",
                                                __func__, clki->name, ret);
                                        goto out;
                                }
                        } else if (!on && clki->enabled) {
                                clk_disable_unprepare(clki->clk);
                        }
                        clki->enabled = on;
                        dev_dbg(hba->dev, "%s: clk: %s %sabled\n", __func__,
                                        clki->name, on ? "en" : "dis");
                }
        }

        ret = ufshcd_vops_setup_clocks(hba, on, POST_CHANGE);
        if (ret)
                return ret;

out:
        if (ret) {
                list_for_each_entry(clki, head, list) {
                        if (!IS_ERR_OR_NULL(clki->clk) && clki->enabled)
                                clk_disable_unprepare(clki->clk);
                }
        } else if (!ret && on) {
                spin_lock_irqsave(hba->host->host_lock, flags);
                hba->clk_gating.state = CLKS_ON;
                trace_ufshcd_clk_gating(dev_name(hba->dev),
                                        hba->clk_gating.state);
                spin_unlock_irqrestore(hba->host->host_lock, flags);
        }

        if (clk_state_changed)
                trace_ufshcd_profile_clk_gating(dev_name(hba->dev),
                        (on ? "on" : "off"),
                        ktime_to_us(ktime_sub(ktime_get(), start)), ret);
        return ret;
}

static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
{
        return  __ufshcd_setup_clocks(hba, on, false);
}

static int ufshcd_init_clocks(struct ufs_hba *hba)
{
        int ret = 0;
        struct ufs_clk_info *clki;
        struct device *dev = hba->dev;
        struct list_head *head = &hba->clk_list_head;

        if (!head || list_empty(head))
                goto out;

        list_for_each_entry(clki, head, list) {
                if (!clki->name)
                        continue;

                clki->clk = devm_clk_get(dev, clki->name);
                if (IS_ERR(clki->clk)) {
                        ret = PTR_ERR(clki->clk);
                        dev_err(dev, "%s: %s clk get failed, %d\n",
                                        __func__, clki->name, ret);
                        goto out;
                }

                if (clki->max_freq) {
                        ret = clk_set_rate(clki->clk, clki->max_freq);
                        if (ret) {
                                dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
                                        __func__, clki->name,
                                        clki->max_freq, ret);
                                goto out;
                        }
                        clki->curr_freq = clki->max_freq;
                }
                dev_dbg(dev, "%s: clk: %s, rate: %lu\n", __func__,
                                clki->name, clk_get_rate(clki->clk));
        }
out:
        return ret;
}

static int ufshcd_variant_hba_init(struct ufs_hba *hba)
{
        int err = 0;

        if (!hba->vops)
                goto out;

        err = ufshcd_vops_init(hba);
        if (err)
                goto out;

        err = ufshcd_vops_setup_regulators(hba, true);
        if (err)
                goto out_exit;

        goto out;

out_exit:
        ufshcd_vops_exit(hba);
out:
        if (err)
                dev_err(hba->dev, "%s: variant %s init failed err %d\n",
                        __func__, ufshcd_get_var_name(hba), err);
        return err;
}

static void ufshcd_variant_hba_exit(struct ufs_hba *hba)
{
        if (!hba->vops)
                return;

        ufshcd_vops_setup_regulators(hba, false);

        ufshcd_vops_exit(hba);
}

static int ufshcd_hba_init(struct ufs_hba *hba)
{
        int err;

        /*
         * Handle host controller power separately from the UFS device power
         * rails as it will help controlling the UFS host controller power
         * collapse easily which is different than UFS device power collapse.
         * Also, enable the host controller power before we go ahead with rest
         * of the initialization here.
         */
        err = ufshcd_init_hba_vreg(hba);
        if (err)
                goto out;

        err = ufshcd_setup_hba_vreg(hba, true);
        if (err)
                goto out;

        err = ufshcd_init_clocks(hba);
        if (err)
                goto out_disable_hba_vreg;

        err = ufshcd_setup_clocks(hba, true);
        if (err)
                goto out_disable_hba_vreg;

        err = ufshcd_init_vreg(hba);
        if (err)
                goto out_disable_clks;

        err = ufshcd_setup_vreg(hba, true);
        if (err)
                goto out_disable_clks;

        err = ufshcd_variant_hba_init(hba);
        if (err)
                goto out_disable_vreg;

        hba->is_powered = true;
        goto out;

out_disable_vreg:
        ufshcd_setup_vreg(hba, false);
out_disable_clks:
        ufshcd_setup_clocks(hba, false);
out_disable_hba_vreg:
        ufshcd_setup_hba_vreg(hba, false);
out:
        return err;
}

static void ufshcd_hba_exit(struct ufs_hba *hba)
{
        if (hba->is_powered) {
                ufshcd_variant_hba_exit(hba);
                ufshcd_setup_vreg(hba, false);
                ufshcd_suspend_clkscaling(hba);
                if (ufshcd_is_clkscaling_supported(hba)) {
                        if (hba->devfreq)
                                ufshcd_suspend_clkscaling(hba);
                        destroy_workqueue(hba->clk_scaling.workq);
                }
                ufshcd_setup_clocks(hba, false);
                ufshcd_setup_hba_vreg(hba, false);
                hba->is_powered = false;
        }
}

static int
ufshcd_send_request_sense(struct ufs_hba *hba, struct scsi_device *sdp)
{
        unsigned char cmd[6] = {REQUEST_SENSE,
                                0,
                                0,
                                0,
                                UFSHCD_REQ_SENSE_SIZE,
                                0};
        char *buffer;
        int ret;

        buffer = kzalloc(UFSHCD_REQ_SENSE_SIZE, GFP_KERNEL);
        if (!buffer) {
                ret = -ENOMEM;
                goto out;
        }

        ret = scsi_execute(sdp, cmd, DMA_FROM_DEVICE, buffer,
                        UFSHCD_REQ_SENSE_SIZE, NULL, NULL,
                        msecs_to_jiffies(1000), 3, 0, RQF_PM, NULL);
        if (ret)
                pr_err("%s: failed with err %d\n", __func__, ret);

        kfree(buffer);
out:
        return ret;
}

/**
 * ufshcd_set_dev_pwr_mode - sends START STOP UNIT command to set device
 *                           power mode
 * @hba: per adapter instance
 * @pwr_mode: device power mode to set
 *
 * Returns 0 if requested power mode is set successfully
 * Returns non-zero if failed to set the requested power mode
 */
static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
                                     enum ufs_dev_pwr_mode pwr_mode)
{
        unsigned char cmd[6] = { START_STOP };
        struct scsi_sense_hdr sshdr;
        struct scsi_device *sdp;
        unsigned long flags;
        int ret;

        spin_lock_irqsave(hba->host->host_lock, flags);
        sdp = hba->sdev_ufs_device;
        if (sdp) {
                ret = scsi_device_get(sdp);
                if (!ret && !scsi_device_online(sdp)) {
                        ret = -ENODEV;
                        scsi_device_put(sdp);
                }
        } else {
                ret = -ENODEV;
        }
        spin_unlock_irqrestore(hba->host->host_lock, flags);

        if (ret)
                return ret;

        /*
         * If scsi commands fail, the scsi mid-layer schedules scsi error-
         * handling, which would wait for host to be resumed. Since we know
         * we are functional while we are here, skip host resume in error
         * handling context.
         */
        hba->host->eh_noresume = 1;
        if (hba->wlun_dev_clr_ua) {
                ret = ufshcd_send_request_sense(hba, sdp);
                if (ret)
                        goto out;
                /* Unit attention condition is cleared now */
                hba->wlun_dev_clr_ua = false;
        }

        cmd[4] = pwr_mode << 4;

        /*
         * Current function would be generally called from the power management
         * callbacks hence set the RQF_PM flag so that it doesn't resume the
         * already suspended childs.
         */
        ret = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
                        START_STOP_TIMEOUT, 0, 0, RQF_PM, NULL);
        if (ret) {
                sdev_printk(KERN_WARNING, sdp,
                            "START_STOP failed for power mode: %d, result %x\n",
                            pwr_mode, ret);
                if (driver_byte(ret) & DRIVER_SENSE)
                        scsi_print_sense_hdr(sdp, NULL, &sshdr);
        }

        if (!ret)
                hba->curr_dev_pwr_mode = pwr_mode;
out:
        scsi_device_put(sdp);
        hba->host->eh_noresume = 0;
        return ret;
}

static int ufshcd_link_state_transition(struct ufs_hba *hba,
                                        enum uic_link_state req_link_state,
                                        int check_for_bkops)
{
        int ret = 0;

        if (req_link_state == hba->uic_link_state)
                return 0;

        if (req_link_state == UIC_LINK_HIBERN8_STATE) {
                ret = ufshcd_uic_hibern8_enter(hba);
                if (!ret)
                        ufshcd_set_link_hibern8(hba);
                else
                        goto out;
        }
        /*
         * If autobkops is enabled, link can't be turned off because
         * turning off the link would also turn off the device.
         */
        else if ((req_link_state == UIC_LINK_OFF_STATE) &&
                   (!check_for_bkops || (check_for_bkops &&
                    !hba->auto_bkops_enabled))) {
                /*
                 * Let's make sure that link is in low power mode, we are doing
                 * this currently by putting the link in Hibern8. Otherway to
                 * put the link in low power mode is to send the DME end point
                 * to device and then send the DME reset command to local
                 * unipro. But putting the link in hibern8 is much faster.
                 */
                ret = ufshcd_uic_hibern8_enter(hba);
                if (ret)
                        goto out;
                /*
                 * Change controller state to "reset state" which
                 * should also put the link in off/reset state
                 */
                ufshcd_hba_stop(hba, true);
                /*
                 * TODO: Check if we need any delay to make sure that
                 * controller is reset
                 */
                ufshcd_set_link_off(hba);
        }

out:
        return ret;
}

static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
{
        /*
         * It seems some UFS devices may keep drawing more than sleep current
         * (atleast for 500us) from UFS rails (especially from VCCQ rail).
         * To avoid this situation, add 2ms delay before putting these UFS
         * rails in LPM mode.
         */
        if (!ufshcd_is_link_active(hba) &&
            hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM)
                usleep_range(2000, 2100);

        /*
         * If UFS device is either in UFS_Sleep turn off VCC rail to save some
         * power.
         *
         * If UFS device and link is in OFF state, all power supplies (VCC,
         * VCCQ, VCCQ2) can be turned off if power on write protect is not
         * required. If UFS link is inactive (Hibern8 or OFF state) and device
         * is in sleep state, put VCCQ & VCCQ2 rails in LPM mode.
         *
         * Ignore the error returned by ufshcd_toggle_vreg() as device is anyway
         * in low power state which would save some power.
         */
        if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) &&
            !hba->dev_info.is_lu_power_on_wp) {
                ufshcd_setup_vreg(hba, false);
        } else if (!ufshcd_is_ufs_dev_active(hba)) {
                ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
                if (!ufshcd_is_link_active(hba)) {
                        ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
                        ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
                }
        }
}

static int ufshcd_vreg_set_hpm(struct ufs_hba *hba)
{
        int ret = 0;

        if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) &&
            !hba->dev_info.is_lu_power_on_wp) {
                ret = ufshcd_setup_vreg(hba, true);
        } else if (!ufshcd_is_ufs_dev_active(hba)) {
                if (!ret && !ufshcd_is_link_active(hba)) {
                        ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq);
                        if (ret)
                                goto vcc_disable;
                        ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2);
                        if (ret)
                                goto vccq_lpm;
                }
                ret = ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, true);
        }
        goto out;

vccq_lpm:
        ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
vcc_disable:
        ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
out:
        return ret;
}

static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba)
{
        if (ufshcd_is_link_off(hba))
                ufshcd_setup_hba_vreg(hba, false);
}

static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
{
        if (ufshcd_is_link_off(hba))
                ufshcd_setup_hba_vreg(hba, true);
}

/**
 * ufshcd_suspend - helper function for suspend operations
 * @hba: per adapter instance
 * @pm_op: desired low power operation type
 *
 * This function will try to put the UFS device and link into low power
 * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
 * (System PM level).
 *
 * If this function is called during shutdown, it will make sure that
 * both UFS device and UFS link is powered off.
 *
 * NOTE: UFS device & link must be active before we enter in this function.
 *
 * Returns 0 for success and non-zero for failure
 */
static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
        int ret = 0;
        enum ufs_pm_level pm_lvl;
        enum ufs_dev_pwr_mode req_dev_pwr_mode;
        enum uic_link_state req_link_state;

        hba->pm_op_in_progress = 1;
        if (!ufshcd_is_shutdown_pm(pm_op)) {
                pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
                         hba->rpm_lvl : hba->spm_lvl;
                req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl);
                req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl);
        } else {
                req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE;
                req_link_state = UIC_LINK_OFF_STATE;
        }

        /*
         * If we can't transition into any of the low power modes
         * just gate the clocks.
         */
        ufshcd_hold(hba, false);
        hba->clk_gating.is_suspended = true;

        if (hba->clk_scaling.is_allowed) {
                cancel_work_sync(&hba->clk_scaling.suspend_work);
                cancel_work_sync(&hba->clk_scaling.resume_work);
                ufshcd_suspend_clkscaling(hba);
        }

        if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
                        req_link_state == UIC_LINK_ACTIVE_STATE) {
                goto disable_clks;
        }

        if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) &&
            (req_link_state == hba->uic_link_state))
                goto enable_gating;

        /* UFS device & link must be active before we enter in this function */
        if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) {
                ret = -EINVAL;
                goto enable_gating;
        }

        if (ufshcd_is_runtime_pm(pm_op)) {
                if (ufshcd_can_autobkops_during_suspend(hba)) {
                        /*
                         * The device is idle with no requests in the queue,
                         * allow background operations if bkops status shows
                         * that performance might be impacted.
                         */
                        ret = ufshcd_urgent_bkops(hba);
                        if (ret)
                                goto enable_gating;
                } else {
                        /* make sure that auto bkops is disabled */
                        ufshcd_disable_auto_bkops(hba);
                }
        }

        if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
             ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
               !ufshcd_is_runtime_pm(pm_op))) {
                /* ensure that bkops is disabled */
                ufshcd_disable_auto_bkops(hba);
                ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
                if (ret)
                        goto enable_gating;
        }

        ret = ufshcd_link_state_transition(hba, req_link_state, 1);
        if (ret)
                goto set_dev_active;

        ufshcd_vreg_set_lpm(hba);

disable_clks:
        /*
         * Call vendor specific suspend callback. As these callbacks may access
         * vendor specific host controller register space call them before the
         * host clocks are ON.
         */
        ret = ufshcd_vops_suspend(hba, pm_op);
        if (ret)
                goto set_link_active;

        if (!ufshcd_is_link_active(hba))
                ufshcd_setup_clocks(hba, false);
        else
                /* If link is active, device ref_clk can't be switched off */
                __ufshcd_setup_clocks(hba, false, true);

        hba->clk_gating.state = CLKS_OFF;
        trace_ufshcd_clk_gating(dev_name(hba->dev), hba->clk_gating.state);
        /*
         * Disable the host irq as host controller as there won't be any
         * host controller transaction expected till resume.
         */
        ufshcd_disable_irq(hba);
        /* Put the host controller in low power mode if possible */
        ufshcd_hba_vreg_set_lpm(hba);
        goto out;

set_link_active:
        if (hba->clk_scaling.is_allowed)
                ufshcd_resume_clkscaling(hba);
        ufshcd_vreg_set_hpm(hba);
        if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba))
                ufshcd_set_link_active(hba);
        else if (ufshcd_is_link_off(hba))
                ufshcd_host_reset_and_restore(hba);
set_dev_active:
        if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
                ufshcd_disable_auto_bkops(hba);
enable_gating:
        if (hba->clk_scaling.is_allowed)
                ufshcd_resume_clkscaling(hba);
        hba->clk_gating.is_suspended = false;
        ufshcd_release(hba);
out:
        hba->pm_op_in_progress = 0;
        return ret;
}

/**
 * ufshcd_resume - helper function for resume operations
 * @hba: per adapter instance
 * @pm_op: runtime PM or system PM
 *
 * This function basically brings the UFS device, UniPro link and controller
 * to active state.
 *
 * Returns 0 for success and non-zero for failure
 */
static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
        int ret;
        enum uic_link_state old_link_state;

        hba->pm_op_in_progress = 1;
        old_link_state = hba->uic_link_state;

        ufshcd_hba_vreg_set_hpm(hba);
        /* Make sure clocks are enabled before accessing controller */
        ret = ufshcd_setup_clocks(hba, true);
        if (ret)
                goto out;

        /* enable the host irq as host controller would be active soon */
        ret = ufshcd_enable_irq(hba);
        if (ret)
                goto disable_irq_and_vops_clks;

        ret = ufshcd_vreg_set_hpm(hba);
        if (ret)
                goto disable_irq_and_vops_clks;

        /*
         * Call vendor specific resume callback. As these callbacks may access
         * vendor specific host controller register space call them when the
         * host clocks are ON.
         */
        ret = ufshcd_vops_resume(hba, pm_op);
        if (ret)
                goto disable_vreg;

        if (ufshcd_is_link_hibern8(hba)) {
                ret = ufshcd_uic_hibern8_exit(hba);
                if (!ret)
                        ufshcd_set_link_active(hba);
                else
                        goto vendor_suspend;
        } else if (ufshcd_is_link_off(hba)) {
                ret = ufshcd_host_reset_and_restore(hba);
                /*
                 * ufshcd_host_reset_and_restore() should have already
                 * set the link state as active
                 */
                if (ret || !ufshcd_is_link_active(hba))
                        goto vendor_suspend;
        }

        if (!ufshcd_is_ufs_dev_active(hba)) {
                ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
                if (ret)
                        goto set_old_link_state;
        }

        if (ufshcd_keep_autobkops_enabled_except_suspend(hba))
                ufshcd_enable_auto_bkops(hba);
        else
                /*
                 * If BKOPs operations are urgently needed at this moment then
                 * keep auto-bkops enabled or else disable it.
                 */
                ufshcd_urgent_bkops(hba);

        hba->clk_gating.is_suspended = false;

        if (hba->clk_scaling.is_allowed)
                ufshcd_resume_clkscaling(hba);

        /* Schedule clock gating in case of no access to UFS device yet */
        ufshcd_release(hba);
        goto out;

set_old_link_state:
        ufshcd_link_state_transition(hba, old_link_state, 0);
vendor_suspend:
        ufshcd_vops_suspend(hba, pm_op);
disable_vreg:
        ufshcd_vreg_set_lpm(hba);
disable_irq_and_vops_clks:
        ufshcd_disable_irq(hba);
        if (hba->clk_scaling.is_allowed)
                ufshcd_suspend_clkscaling(hba);
        ufshcd_setup_clocks(hba, false);
out:
        hba->pm_op_in_progress = 0;
        return ret;
}

/**
 * ufshcd_system_suspend - system suspend routine
 * @hba: per adapter instance
 * @pm_op: runtime PM or system PM
 *
 * Check the description of ufshcd_suspend() function for more details.
 *
 * Returns 0 for success and non-zero for failure
 */
int ufshcd_system_suspend(struct ufs_hba *hba)
{
        int ret = 0;
        ktime_t start = ktime_get();

        if (!hba || !hba->is_powered)
                return 0;

        if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) ==
             hba->curr_dev_pwr_mode) &&
            (ufs_get_pm_lvl_to_link_pwr_state(hba->spm_lvl) ==
             hba->uic_link_state))
                goto out;

        if (pm_runtime_suspended(hba->dev)) {
                /*
                 * UFS device and/or UFS link low power states during runtime
                 * suspend seems to be different than what is expected during
                 * system suspend. Hence runtime resume the devic & link and
                 * let the system suspend low power states to take effect.
                 * TODO: If resume takes longer time, we might have optimize
                 * it in future by not resuming everything if possible.
                 */
                ret = ufshcd_runtime_resume(hba);
                if (ret)
                        goto out;
        }

        ret = ufshcd_suspend(hba, UFS_SYSTEM_PM);
out:
        trace_ufshcd_system_suspend(dev_name(hba->dev), ret,
                ktime_to_us(ktime_sub(ktime_get(), start)),
                hba->curr_dev_pwr_mode, hba->uic_link_state);
        if (!ret)
                hba->is_sys_suspended = true;
        return ret;
}
EXPORT_SYMBOL(ufshcd_system_suspend);

/**
 * ufshcd_system_resume - system resume routine
 * @hba: per adapter instance
 *
 * Returns 0 for success and non-zero for failure
 */

int ufshcd_system_resume(struct ufs_hba *hba)
{
        int ret = 0;
        ktime_t start = ktime_get();

        if (!hba)
                return -EINVAL;

        if (!hba->is_powered || pm_runtime_suspended(hba->dev))
                /*
                 * Let the runtime resume take care of resuming
                 * if runtime suspended.
                 */
                goto out;
        else
                ret = ufshcd_resume(hba, UFS_SYSTEM_PM);
out:
        trace_ufshcd_system_resume(dev_name(hba->dev), ret,
                ktime_to_us(ktime_sub(ktime_get(), start)),
                hba->curr_dev_pwr_mode, hba->uic_link_state);
        return ret;
}
EXPORT_SYMBOL(ufshcd_system_resume);

/**
 * ufshcd_runtime_suspend - runtime suspend routine
 * @hba: per adapter instance
 *
 * Check the description of ufshcd_suspend() function for more details.
 *
 * Returns 0 for success and non-zero for failure
 */
int ufshcd_runtime_suspend(struct ufs_hba *hba)
{
        int ret = 0;
        ktime_t start = ktime_get();

        if (!hba)
                return -EINVAL;

        if (!hba->is_powered)
                goto out;
        else
                ret = ufshcd_suspend(hba, UFS_RUNTIME_PM);
out:
        trace_ufshcd_runtime_suspend(dev_name(hba->dev), ret,
                ktime_to_us(ktime_sub(ktime_get(), start)),
                hba->curr_dev_pwr_mode, hba->uic_link_state);
        return ret;
}
EXPORT_SYMBOL(ufshcd_runtime_suspend);

/**
 * ufshcd_runtime_resume - runtime resume routine
 * @hba: per adapter instance
 *
 * This function basically brings the UFS device, UniPro link and controller
 * to active state. Following operations are done in this function:
 *
 * 1. Turn on all the controller related clocks
 * 2. Bring the UniPro link out of Hibernate state
 * 3. If UFS device is in sleep state, turn ON VCC rail and bring the UFS device
 *    to active state.
 * 4. If auto-bkops is enabled on the device, disable it.
 *
 * So following would be the possible power state after this function return
 * successfully:
 *      S1: UFS device in Active state with VCC rail ON
 *          UniPro link in Active state
 *          All the UFS/UniPro controller clocks are ON
 *
 * Returns 0 for success and non-zero for failure
 */
int ufshcd_runtime_resume(struct ufs_hba *hba)
{
        int ret = 0;
        ktime_t start = ktime_get();

        if (!hba)
                return -EINVAL;

        if (!hba->is_powered)
                goto out;
        else
                ret = ufshcd_resume(hba, UFS_RUNTIME_PM);
out:
        trace_ufshcd_runtime_resume(dev_name(hba->dev), ret,
                ktime_to_us(ktime_sub(ktime_get(), start)),
                hba->curr_dev_pwr_mode, hba->uic_link_state);
        return ret;
}
EXPORT_SYMBOL(ufshcd_runtime_resume);

int ufshcd_runtime_idle(struct ufs_hba *hba)
{
        return 0;
}
EXPORT_SYMBOL(ufshcd_runtime_idle);

static inline ssize_t ufshcd_pm_lvl_store(struct device *dev,
                                           struct device_attribute *attr,
                                           const char *buf, size_t count,
                                           bool rpm)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);
        unsigned long flags, value;

        if (kstrtoul(buf, 0, &value))
                return -EINVAL;

        if (value >= UFS_PM_LVL_MAX)
                return -EINVAL;

        spin_lock_irqsave(hba->host->host_lock, flags);
        if (rpm)
                hba->rpm_lvl = value;
        else
                hba->spm_lvl = value;
        spin_unlock_irqrestore(hba->host->host_lock, flags);
        return count;
}

static ssize_t ufshcd_rpm_lvl_show(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);
        int curr_len;
        u8 lvl;

        curr_len = snprintf(buf, PAGE_SIZE,
                            "\nCurrent Runtime PM level [%d] => dev_state [%s] link_state [%s]\n",
                            hba->rpm_lvl,
                            ufschd_ufs_dev_pwr_mode_to_string(
                                ufs_pm_lvl_states[hba->rpm_lvl].dev_state),
                            ufschd_uic_link_state_to_string(
                                ufs_pm_lvl_states[hba->rpm_lvl].link_state));

        curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
                             "\nAll available Runtime PM levels info:\n");
        for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++)
                curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
                                     "\tRuntime PM level [%d] => dev_state [%s] link_state [%s]\n",
                                    lvl,
                                    ufschd_ufs_dev_pwr_mode_to_string(
                                        ufs_pm_lvl_states[lvl].dev_state),
                                    ufschd_uic_link_state_to_string(
                                        ufs_pm_lvl_states[lvl].link_state));

        return curr_len;
}

static ssize_t ufshcd_rpm_lvl_store(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        return ufshcd_pm_lvl_store(dev, attr, buf, count, true);
}

static void ufshcd_add_rpm_lvl_sysfs_nodes(struct ufs_hba *hba)
{
        hba->rpm_lvl_attr.show = ufshcd_rpm_lvl_show;
        hba->rpm_lvl_attr.store = ufshcd_rpm_lvl_store;
        sysfs_attr_init(&hba->rpm_lvl_attr.attr);
        hba->rpm_lvl_attr.attr.name = "rpm_lvl";
        hba->rpm_lvl_attr.attr.mode = 0644;
        if (device_create_file(hba->dev, &hba->rpm_lvl_attr))
                dev_err(hba->dev, "Failed to create sysfs for rpm_lvl\n");
}

static ssize_t ufshcd_spm_lvl_show(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        struct ufs_hba *hba = dev_get_drvdata(dev);
        int curr_len;
        u8 lvl;

        curr_len = snprintf(buf, PAGE_SIZE,
                            "\nCurrent System PM level [%d] => dev_state [%s] link_state [%s]\n",
                            hba->spm_lvl,
                            ufschd_ufs_dev_pwr_mode_to_string(
                                ufs_pm_lvl_states[hba->spm_lvl].dev_state),
                            ufschd_uic_link_state_to_string(
                                ufs_pm_lvl_states[hba->spm_lvl].link_state));

        curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
                             "\nAll available System PM levels info:\n");
        for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++)
                curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
                                     "\tSystem PM level [%d] => dev_state [%s] link_state [%s]\n",
                                    lvl,
                                    ufschd_ufs_dev_pwr_mode_to_string(
                                        ufs_pm_lvl_states[lvl].dev_state),
                                    ufschd_uic_link_state_to_string(
                                        ufs_pm_lvl_states[lvl].link_state));

        return curr_len;
}

static ssize_t ufshcd_spm_lvl_store(struct device *dev,
                struct device_attribute *attr, const char *buf, size_t count)
{
        return ufshcd_pm_lvl_store(dev, attr, buf, count, false);
}

static void ufshcd_add_spm_lvl_sysfs_nodes(struct ufs_hba *hba)
{
        hba->spm_lvl_attr.show = ufshcd_spm_lvl_show;
        hba->spm_lvl_attr.store = ufshcd_spm_lvl_store;
        sysfs_attr_init(&hba->spm_lvl_attr.attr);
        hba->spm_lvl_attr.attr.name = "spm_lvl";
        hba->spm_lvl_attr.attr.mode = 0644;
        if (device_create_file(hba->dev, &hba->spm_lvl_attr))
                dev_err(hba->dev, "Failed to create sysfs for spm_lvl\n");
}

static inline void ufshcd_add_sysfs_nodes(struct ufs_hba *hba)
{
        ufshcd_add_rpm_lvl_sysfs_nodes(hba);
        ufshcd_add_spm_lvl_sysfs_nodes(hba);
}

static inline void ufshcd_remove_sysfs_nodes(struct ufs_hba *hba)
{
        device_remove_file(hba->dev, &hba->rpm_lvl_attr);
        device_remove_file(hba->dev, &hba->spm_lvl_attr);
}

/**
 * ufshcd_shutdown - shutdown routine
 * @hba: per adapter instance
 *
 * This function would power off both UFS device and UFS link.
 *
 * Returns 0 always to allow force shutdown even in case of errors.
 */
int ufshcd_shutdown(struct ufs_hba *hba)
{
        int ret = 0;

        if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba))
                goto out;

        if (pm_runtime_suspended(hba->dev)) {
                ret = ufshcd_runtime_resume(hba);
                if (ret)
                        goto out;
        }

        ret = ufshcd_suspend(hba, UFS_SHUTDOWN_PM);
out:
        if (ret)
                dev_err(hba->dev, "%s failed, err %d\n", __func__, ret);
        /* allow force shutdown even in case of errors */
        return 0;
}
EXPORT_SYMBOL(ufshcd_shutdown);

/**
 * ufshcd_remove - de-allocate SCSI host and host memory space
 *              data structure memory
 * @hba - per adapter instance
 */
void ufshcd_remove(struct ufs_hba *hba)
{
        ufshcd_remove_sysfs_nodes(hba);
        scsi_remove_host(hba->host);
        /* disable interrupts */
        ufshcd_disable_intr(hba, hba->intr_mask);
        ufshcd_hba_stop(hba, true);

        ufshcd_exit_clk_gating(hba);
        if (ufshcd_is_clkscaling_supported(hba))
                device_remove_file(hba->dev, &hba->clk_scaling.enable_attr);
        ufshcd_hba_exit(hba);
}
EXPORT_SYMBOL_GPL(ufshcd_remove);

/**
 * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA)
 * @hba: pointer to Host Bus Adapter (HBA)
 */
void ufshcd_dealloc_host(struct ufs_hba *hba)
{
        scsi_host_put(hba->host);
}
EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);

/**
 * ufshcd_set_dma_mask - Set dma mask based on the controller
 *                       addressing capability
 * @hba: per adapter instance
 *
 * Returns 0 for success, non-zero for failure
 */
static int ufshcd_set_dma_mask(struct ufs_hba *hba)
{
        if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) {
                if (!dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(64)))
                        return 0;
        }
        return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32));
}

/**
 * ufshcd_alloc_host - allocate Host Bus Adapter (HBA)
 * @dev: pointer to device handle
 * @hba_handle: driver private handle
 * Returns 0 on success, non-zero value on failure
 */
int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle)
{
        struct Scsi_Host *host;
        struct ufs_hba *hba;
        int err = 0;

        if (!dev) {
                dev_err(dev,
                "Invalid memory reference for dev is NULL\n");
                err = -ENODEV;
                goto out_error;
        }

        host = scsi_host_alloc(&ufshcd_driver_template,
                                sizeof(struct ufs_hba));
        if (!host) {
                dev_err(dev, "scsi_host_alloc failed\n");
                err = -ENOMEM;
                goto out_error;
        }
        hba = shost_priv(host);
        hba->host = host;
        hba->dev = dev;
        *hba_handle = hba;

out_error:
        return err;
}
EXPORT_SYMBOL(ufshcd_alloc_host);

/**
 * ufshcd_init - Driver initialization routine
 * @hba: per-adapter instance
 * @mmio_base: base register address
 * @irq: Interrupt line of device
 * Returns 0 on success, non-zero value on failure
 */
int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
{
        int err;
        struct Scsi_Host *host = hba->host;
        struct device *dev = hba->dev;

        if (!mmio_base) {
                dev_err(hba->dev,
                "Invalid memory reference for mmio_base is NULL\n");
                err = -ENODEV;
                goto out_error;
        }

        hba->mmio_base = mmio_base;
        hba->irq = irq;

        /* Set descriptor lengths to specification defaults */
        ufshcd_def_desc_sizes(hba);

        err = ufshcd_hba_init(hba);
        if (err)
                goto out_error;

        /* Read capabilities registers */
        ufshcd_hba_capabilities(hba);

        /* Get UFS version supported by the controller */
        hba->ufs_version = ufshcd_get_ufs_version(hba);

        if ((hba->ufs_version != UFSHCI_VERSION_10) &&
            (hba->ufs_version != UFSHCI_VERSION_11) &&
            (hba->ufs_version != UFSHCI_VERSION_20) &&
            (hba->ufs_version != UFSHCI_VERSION_21))
                dev_err(hba->dev, "invalid UFS version 0x%x\n",
                        hba->ufs_version);

        /* Get Interrupt bit mask per version */
        hba->intr_mask = ufshcd_get_intr_mask(hba);

        err = ufshcd_set_dma_mask(hba);
        if (err) {
                dev_err(hba->dev, "set dma mask failed\n");
                goto out_disable;
        }

        /* Allocate memory for host memory space */
        err = ufshcd_memory_alloc(hba);
        if (err) {
                dev_err(hba->dev, "Memory allocation failed\n");
                goto out_disable;
        }

        /* Configure LRB */
        ufshcd_host_memory_configure(hba);

        host->can_queue = hba->nutrs;
        host->cmd_per_lun = hba->nutrs;
        host->max_id = UFSHCD_MAX_ID;
        host->max_lun = UFS_MAX_LUNS;
        host->max_channel = UFSHCD_MAX_CHANNEL;
        host->unique_id = host->host_no;
        host->max_cmd_len = MAX_CDB_SIZE;

        hba->max_pwr_info.is_valid = false;

        /* Initailize wait queue for task management */
        init_waitqueue_head(&hba->tm_wq);
        init_waitqueue_head(&hba->tm_tag_wq);

        /* Initialize work queues */
        INIT_WORK(&hba->eh_work, ufshcd_err_handler);
        INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler);

        /* Initialize UIC command mutex */
        mutex_init(&hba->uic_cmd_mutex);

        /* Initialize mutex for device management commands */
        mutex_init(&hba->dev_cmd.lock);

        init_rwsem(&hba->clk_scaling_lock);

        /* Initialize device management tag acquire wait queue */
        init_waitqueue_head(&hba->dev_cmd.tag_wq);

        ufshcd_init_clk_gating(hba);

        /*
         * In order to avoid any spurious interrupt immediately after
         * registering UFS controller interrupt handler, clear any pending UFS
         * interrupt status and disable all the UFS interrupts.
         */
        ufshcd_writel(hba, ufshcd_readl(hba, REG_INTERRUPT_STATUS),
                      REG_INTERRUPT_STATUS);
        ufshcd_writel(hba, 0, REG_INTERRUPT_ENABLE);
        /*
         * Make sure that UFS interrupts are disabled and any pending interrupt
         * status is cleared before registering UFS interrupt handler.
         */
        mb();

        /* IRQ registration */
        err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
        if (err) {
                dev_err(hba->dev, "request irq failed\n");
                goto exit_gating;
        } else {
                hba->is_irq_enabled = true;
        }

        err = scsi_add_host(host, hba->dev);
        if (err) {
                dev_err(hba->dev, "scsi_add_host failed\n");
                goto exit_gating;
        }

        /* Host controller enable */
        err = ufshcd_hba_enable(hba);
        if (err) {
                dev_err(hba->dev, "Host controller enable failed\n");
                ufshcd_print_host_regs(hba);
                ufshcd_print_host_state(hba);
                goto out_remove_scsi_host;
        }

        if (ufshcd_is_clkscaling_supported(hba)) {
                char wq_name[sizeof("ufs_clkscaling_00")];

                INIT_WORK(&hba->clk_scaling.suspend_work,
                          ufshcd_clk_scaling_suspend_work);
                INIT_WORK(&hba->clk_scaling.resume_work,
                          ufshcd_clk_scaling_resume_work);

                snprintf(wq_name, sizeof(wq_name), "ufs_clkscaling_%d",
                         host->host_no);
                hba->clk_scaling.workq = create_singlethread_workqueue(wq_name);

                ufshcd_clkscaling_init_sysfs(hba);
        }

        /*
         * Set the default power management level for runtime and system PM.
         * Default power saving mode is to keep UFS link in Hibern8 state
         * and UFS device in sleep state.
         */
        hba->rpm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state(
                                                UFS_SLEEP_PWR_MODE,
                                                UIC_LINK_HIBERN8_STATE);
        hba->spm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state(
                                                UFS_SLEEP_PWR_MODE,
                                                UIC_LINK_HIBERN8_STATE);

        /* Hold auto suspend until async scan completes */
        pm_runtime_get_sync(dev);

        /*
         * We are assuming that device wasn't put in sleep/power-down
         * state exclusively during the boot stage before kernel.
         * This assumption helps avoid doing link startup twice during
         * ufshcd_probe_hba().
         */
        ufshcd_set_ufs_dev_active(hba);

        async_schedule(ufshcd_async_scan, hba);
        ufshcd_add_sysfs_nodes(hba);

        return 0;

out_remove_scsi_host:
        scsi_remove_host(hba->host);
exit_gating:
        ufshcd_exit_clk_gating(hba);
out_disable:
        hba->is_irq_enabled = false;
        ufshcd_hba_exit(hba);
out_error:
        return err;
}
EXPORT_SYMBOL_GPL(ufshcd_init);

MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
MODULE_DESCRIPTION("Generic UFS host controller driver Core");
MODULE_LICENSE("GPL");
MODULE_VERSION(UFSHCD_DRIVER_VERSION);