1 /*======================================================================
3 A driver for PCMCIA serial devices
5 serial_cs.c 1.134 2002/05/04 05:48:53
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
32 ======================================================================*/
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/serial_core.h>
43 #include <linux/delay.h>
44 #include <linux/major.h>
46 #include <asm/system.h>
48 #include <pcmcia/cistpl.h>
49 #include <pcmcia/ciscode.h>
50 #include <pcmcia/ds.h>
51 #include <pcmcia/cisreg.h>
56 /*====================================================================*/
58 /* Parameters that can be set with 'insmod' */
60 /* Enable the speaker? */
61 static int do_sound
= 1;
62 /* Skip strict UART tests? */
63 static int buggy_uart
;
65 module_param(do_sound
, int, 0444);
66 module_param(buggy_uart
, int, 0444);
68 /*====================================================================*/
70 /* Table of multi-port card ID's */
75 int multi
; /* 1 = multifunction, > 1 = # ports */
76 void (*config
)(struct pcmcia_device
*);
77 void (*setup
)(struct pcmcia_device
*, struct uart_port
*);
78 void (*wakeup
)(struct pcmcia_device
*);
79 int (*post
)(struct pcmcia_device
*);
83 struct pcmcia_device
*p_dev
;
91 const struct serial_quirk
*quirk
;
94 struct serial_cfg_mem
{
101 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
102 * manfid 0x0160, 0x0104
103 * This card appears to have a 14.7456MHz clock.
105 /* Generic Modem: MD55x (GPRS/EDGE) have
106 * Elan VPU16551 UART with 14.7456MHz oscillator
107 * manfid 0x015D, 0x4C45
109 static void quirk_setup_brainboxes_0104(struct pcmcia_device
*link
, struct uart_port
*port
)
111 port
->uartclk
= 14745600;
114 static int quirk_post_ibm(struct pcmcia_device
*link
)
119 ret
= pcmcia_read_config_byte(link
, 0x800, &val
);
123 ret
= pcmcia_write_config_byte(link
, 0x800, val
| 1);
133 * Nokia cards are not really multiport cards. Shouldn't this
134 * be handled by setting the quirk entry .multi = 0 | 1 ?
136 static void quirk_config_nokia(struct pcmcia_device
*link
)
138 struct serial_info
*info
= link
->priv
;
144 static void quirk_wakeup_oxsemi(struct pcmcia_device
*link
)
146 struct serial_info
*info
= link
->priv
;
149 outb(12, info
->c950ctrl
+ 1);
152 /* request_region? oxsemi branch does no request_region too... */
154 * This sequence is needed to properly initialize MC45 attached to OXCF950.
155 * I tried decreasing these msleep()s, but it worked properly (survived
156 * 1000 stop/start operations) with these timeouts (or bigger).
158 static void quirk_wakeup_possio_gcc(struct pcmcia_device
*link
)
160 struct serial_info
*info
= link
->priv
;
161 unsigned int ctrl
= info
->c950ctrl
;
179 * Socket Dual IO: this enables irq's for second port
181 static void quirk_config_socket(struct pcmcia_device
*link
)
183 struct serial_info
*info
= link
->priv
;
186 link
->config_flags
|= CONF_ENABLE_ESR
;
189 static const struct serial_quirk quirks
[] = {
194 .setup
= quirk_setup_brainboxes_0104
,
199 .setup
= quirk_setup_brainboxes_0104
,
201 .manfid
= MANFID_IBM
,
204 .post
= quirk_post_ibm
,
206 .manfid
= MANFID_INTEL
,
207 .prodid
= PRODID_INTEL_DUAL_RS232
,
210 .manfid
= MANFID_NATINST
,
211 .prodid
= PRODID_NATINST_QUAD_RS232
,
214 .manfid
= MANFID_NOKIA
,
217 .config
= quirk_config_nokia
,
219 .manfid
= MANFID_OMEGA
,
220 .prodid
= PRODID_OMEGA_QSP_100
,
223 .manfid
= MANFID_OXSEMI
,
226 .wakeup
= quirk_wakeup_oxsemi
,
228 .manfid
= MANFID_POSSIO
,
229 .prodid
= PRODID_POSSIO_GCC
,
231 .wakeup
= quirk_wakeup_possio_gcc
,
233 .manfid
= MANFID_QUATECH
,
234 .prodid
= PRODID_QUATECH_DUAL_RS232
,
237 .manfid
= MANFID_QUATECH
,
238 .prodid
= PRODID_QUATECH_DUAL_RS232_D1
,
241 .manfid
= MANFID_QUATECH
,
242 .prodid
= PRODID_QUATECH_DUAL_RS232_G
,
245 .manfid
= MANFID_QUATECH
,
246 .prodid
= PRODID_QUATECH_QUAD_RS232
,
249 .manfid
= MANFID_SOCKET
,
250 .prodid
= PRODID_SOCKET_DUAL_RS232
,
252 .config
= quirk_config_socket
,
254 .manfid
= MANFID_SOCKET
,
257 .config
= quirk_config_socket
,
262 static int serial_config(struct pcmcia_device
* link
);
265 /*======================================================================
267 After a card is removed, serial_remove() will unregister
268 the serial device(s), and release the PCMCIA configuration.
270 ======================================================================*/
272 static void serial_remove(struct pcmcia_device
*link
)
274 struct serial_info
*info
= link
->priv
;
277 dev_dbg(&link
->dev
, "serial_release\n");
280 * Recheck to see if the device is still configured.
282 for (i
= 0; i
< info
->ndev
; i
++)
283 serial8250_unregister_port(info
->line
[i
]);
286 pcmcia_disable_device(link
);
289 static int serial_suspend(struct pcmcia_device
*link
)
291 struct serial_info
*info
= link
->priv
;
294 for (i
= 0; i
< info
->ndev
; i
++)
295 serial8250_suspend_port(info
->line
[i
]);
300 static int serial_resume(struct pcmcia_device
*link
)
302 struct serial_info
*info
= link
->priv
;
305 for (i
= 0; i
< info
->ndev
; i
++)
306 serial8250_resume_port(info
->line
[i
]);
308 if (info
->quirk
&& info
->quirk
->wakeup
)
309 info
->quirk
->wakeup(link
);
314 /*======================================================================
316 serial_attach() creates an "instance" of the driver, allocating
317 local data structures for one device. The device is registered
320 ======================================================================*/
322 static int serial_probe(struct pcmcia_device
*link
)
324 struct serial_info
*info
;
326 dev_dbg(&link
->dev
, "serial_attach()\n");
328 /* Create new serial device */
329 info
= kzalloc(sizeof (*info
), GFP_KERNEL
);
335 link
->config_flags
|= CONF_ENABLE_IRQ
;
337 link
->config_flags
|= CONF_ENABLE_SPKR
;
339 return serial_config(link
);
342 /*======================================================================
344 This deletes a driver "instance". The device is de-registered
345 with Card Services. If it has been released, all local data
346 structures are freed. Otherwise, the structures will be freed
347 when the device is released.
349 ======================================================================*/
351 static void serial_detach(struct pcmcia_device
*link
)
353 struct serial_info
*info
= link
->priv
;
355 dev_dbg(&link
->dev
, "serial_detach\n");
358 * Ensure any outstanding scheduled tasks are completed.
360 flush_scheduled_work();
363 * Ensure that the ports have been released.
371 /*====================================================================*/
373 static int setup_serial(struct pcmcia_device
*handle
, struct serial_info
* info
,
374 unsigned int iobase
, int irq
)
376 struct uart_port port
;
379 memset(&port
, 0, sizeof (struct uart_port
));
380 port
.iobase
= iobase
;
382 port
.flags
= UPF_BOOT_AUTOCONF
| UPF_SKIP_TEST
| UPF_SHARE_IRQ
;
383 port
.uartclk
= 1843200;
384 port
.dev
= &handle
->dev
;
386 port
.flags
|= UPF_BUGGY_UART
;
388 if (info
->quirk
&& info
->quirk
->setup
)
389 info
->quirk
->setup(handle
, &port
);
391 line
= serial8250_register_port(&port
);
393 printk(KERN_NOTICE
"serial_cs: serial8250_register_port() at "
394 "0x%04lx, irq %d failed\n", (u_long
)iobase
, irq
);
398 info
->line
[info
->ndev
] = line
;
404 /*====================================================================*/
406 static int pfc_config(struct pcmcia_device
*p_dev
)
408 unsigned int port
= 0;
409 struct serial_info
*info
= p_dev
->priv
;
411 if ((p_dev
->resource
[1]->end
!= 0) &&
412 (resource_size(p_dev
->resource
[1]) == 8)) {
413 port
= p_dev
->resource
[1]->start
;
415 } else if ((info
->manfid
== MANFID_OSITECH
) &&
416 (resource_size(p_dev
->resource
[0]) == 0x40)) {
417 port
= p_dev
->resource
[0]->start
+ 0x28;
421 return setup_serial(p_dev
, info
, port
, p_dev
->irq
);
423 dev_warn(&p_dev
->dev
, "no usable port range found, giving up\n");
427 static int simple_config_check(struct pcmcia_device
*p_dev
, void *priv_data
)
429 static const int size_table
[2] = { 8, 16 };
430 int *try = priv_data
;
432 if (p_dev
->resource
[0]->start
== 0)
435 if ((*try & 0x1) == 0)
436 p_dev
->io_lines
= 16;
438 if (p_dev
->resource
[0]->end
!= size_table
[(*try >> 1)])
441 p_dev
->resource
[0]->end
= 8;
442 p_dev
->resource
[0]->flags
&= ~IO_DATA_PATH_WIDTH
;
443 p_dev
->resource
[0]->flags
|= IO_DATA_PATH_WIDTH_8
;
445 return pcmcia_request_io(p_dev
);
448 static int simple_config_check_notpicky(struct pcmcia_device
*p_dev
,
451 static const unsigned int base
[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
454 if (p_dev
->io_lines
> 3)
457 p_dev
->resource
[0]->flags
&= ~IO_DATA_PATH_WIDTH
;
458 p_dev
->resource
[0]->flags
|= IO_DATA_PATH_WIDTH_8
;
459 p_dev
->resource
[0]->end
= 8;
461 for (j
= 0; j
< 5; j
++) {
462 p_dev
->resource
[0]->start
= base
[j
];
463 p_dev
->io_lines
= base
[j
] ? 16 : 3;
464 if (!pcmcia_request_io(p_dev
))
470 static int simple_config(struct pcmcia_device
*link
)
472 struct serial_info
*info
= link
->priv
;
473 int i
= -ENODEV
, try;
475 /* First pass: look for a config entry that looks normal.
476 * Two tries: without IO aliases, then with aliases */
477 link
->config_flags
|= CONF_AUTO_SET_VPP
| CONF_AUTO_SET_IO
;
478 for (try = 0; try < 4; try++)
479 if (!pcmcia_loop_config(link
, simple_config_check
, &try))
482 /* Second pass: try to find an entry that isn't picky about
483 its base address, then try to grab any standard serial port
484 address, and finally try to get any free port. */
485 if (!pcmcia_loop_config(link
, simple_config_check_notpicky
, NULL
))
488 dev_warn(&link
->dev
, "no usable port range found, giving up\n");
492 if (info
->multi
&& (info
->manfid
== MANFID_3COM
))
493 link
->config_index
&= ~(0x08);
496 * Apply any configuration quirks.
498 if (info
->quirk
&& info
->quirk
->config
)
499 info
->quirk
->config(link
);
501 i
= pcmcia_enable_device(link
);
504 return setup_serial(link
, info
, link
->resource
[0]->start
, link
->irq
);
507 static int multi_config_check(struct pcmcia_device
*p_dev
, void *priv_data
)
509 int *multi
= priv_data
;
511 if (p_dev
->resource
[1]->end
)
514 /* The quad port cards have bad CIS's, so just look for a
515 window larger than 8 ports and assume it will be right */
516 if (p_dev
->resource
[0]->end
<= 8)
519 p_dev
->resource
[0]->flags
&= ~IO_DATA_PATH_WIDTH
;
520 p_dev
->resource
[0]->flags
|= IO_DATA_PATH_WIDTH_8
;
521 p_dev
->resource
[0]->end
= *multi
* 8;
523 if (pcmcia_request_io(p_dev
))
528 static int multi_config_check_notpicky(struct pcmcia_device
*p_dev
,
531 int *base2
= priv_data
;
533 if (!p_dev
->resource
[0]->end
|| !p_dev
->resource
[1]->end
)
536 p_dev
->resource
[0]->end
= p_dev
->resource
[1]->end
= 8;
537 p_dev
->resource
[0]->flags
&= ~IO_DATA_PATH_WIDTH
;
538 p_dev
->resource
[0]->flags
|= IO_DATA_PATH_WIDTH_8
;
540 if (pcmcia_request_io(p_dev
))
543 *base2
= p_dev
->resource
[0]->start
+ 8;
547 static int multi_config(struct pcmcia_device
*link
)
549 struct serial_info
*info
= link
->priv
;
552 link
->config_flags
|= CONF_AUTO_SET_IO
;
553 /* First, look for a generic full-sized window */
554 if (!pcmcia_loop_config(link
, multi_config_check
, &info
->multi
))
555 base2
= link
->resource
[0]->start
+ 8;
557 /* If that didn't work, look for two windows */
559 if (pcmcia_loop_config(link
, multi_config_check_notpicky
,
561 dev_warn(&link
->dev
, "no usable port range "
562 "found, giving up\n");
568 dev_warn(&link
->dev
, "no usable IRQ found, continuing...\n");
571 * Apply any configuration quirks.
573 if (info
->quirk
&& info
->quirk
->config
)
574 info
->quirk
->config(link
);
576 i
= pcmcia_enable_device(link
);
580 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
581 * 8 registers are for the UART, the others are extra registers.
582 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
584 if (info
->manfid
== MANFID_OXSEMI
|| (info
->manfid
== MANFID_POSSIO
&&
585 info
->prodid
== PRODID_POSSIO_GCC
)) {
588 if (link
->config_index
== 1 ||
589 link
->config_index
== 3) {
590 err
= setup_serial(link
, info
, base2
,
592 base2
= link
->resource
[0]->start
;
594 err
= setup_serial(link
, info
, link
->resource
[0]->start
,
597 info
->c950ctrl
= base2
;
600 * FIXME: We really should wake up the port prior to
601 * handing it over to the serial layer.
603 if (info
->quirk
&& info
->quirk
->wakeup
)
604 info
->quirk
->wakeup(link
);
609 setup_serial(link
, info
, link
->resource
[0]->start
, link
->irq
);
610 for (i
= 0; i
< info
->multi
- 1; i
++)
611 setup_serial(link
, info
, base2
+ (8 * i
),
616 static int serial_check_for_multi(struct pcmcia_device
*p_dev
, void *priv_data
)
618 struct serial_info
*info
= p_dev
->priv
;
620 if (!p_dev
->resource
[0]->end
)
623 if ((!p_dev
->resource
[1]->end
) && (p_dev
->resource
[0]->end
% 8 == 0))
624 info
->multi
= p_dev
->resource
[0]->end
>> 3;
626 if ((p_dev
->resource
[1]->end
) && (p_dev
->resource
[0]->end
== 8)
627 && (p_dev
->resource
[1]->end
== 8))
630 return 0; /* break */
634 /*======================================================================
636 serial_config() is scheduled to run after a CARD_INSERTION event
637 is received, to configure the PCMCIA socket, and to make the
638 serial device available to the system.
640 ======================================================================*/
642 static int serial_config(struct pcmcia_device
* link
)
644 struct serial_info
*info
= link
->priv
;
647 dev_dbg(&link
->dev
, "serial_config\n");
649 /* Is this a compliant multifunction card? */
650 info
->multi
= (link
->socket
->functions
> 1);
652 /* Is this a multiport card? */
653 info
->manfid
= link
->manf_id
;
654 info
->prodid
= link
->card_id
;
656 for (i
= 0; i
< ARRAY_SIZE(quirks
); i
++)
657 if ((quirks
[i
].manfid
== ~0 ||
658 quirks
[i
].manfid
== info
->manfid
) &&
659 (quirks
[i
].prodid
== ~0 ||
660 quirks
[i
].prodid
== info
->prodid
)) {
661 info
->quirk
= &quirks
[i
];
665 /* Another check for dual-serial cards: look for either serial or
666 multifunction cards that ask for appropriate IO port ranges */
667 if ((info
->multi
== 0) &&
668 (link
->has_func_id
) &&
669 (link
->socket
->pcmcia_pfc
== 0) &&
670 ((link
->func_id
== CISTPL_FUNCID_MULTI
) ||
671 (link
->func_id
== CISTPL_FUNCID_SERIAL
)))
672 pcmcia_loop_config(link
, serial_check_for_multi
, info
);
675 * Apply any multi-port quirk.
677 if (info
->quirk
&& info
->quirk
->multi
!= -1)
678 info
->multi
= info
->quirk
->multi
;
681 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
682 link
->manf_id
, link
->card_id
,
683 link
->socket
->pcmcia_pfc
, info
->multi
, info
->quirk
);
684 if (link
->socket
->pcmcia_pfc
)
685 i
= pfc_config(link
);
686 else if (info
->multi
> 1)
687 i
= multi_config(link
);
689 i
= simple_config(link
);
691 if (i
|| info
->ndev
== 0)
695 * Apply any post-init quirk. FIXME: This should really happen
696 * before we register the port, since it might already be in use.
698 if (info
->quirk
&& info
->quirk
->post
)
699 if (info
->quirk
->post(link
))
705 dev_warn(&link
->dev
, "failed to initialize\n");
710 static struct pcmcia_device_id serial_ids
[] = {
711 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
712 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
713 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
714 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
715 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
716 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
717 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
718 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
719 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
720 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
721 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
722 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
723 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
724 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
725 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
726 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
727 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
728 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
729 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
730 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
731 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
732 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
733 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
734 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
735 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
736 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
737 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
738 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
739 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
740 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
741 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
742 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
743 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
744 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
745 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
746 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
747 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
748 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
749 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
750 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
751 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
752 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
753 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
754 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
755 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
756 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
757 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
758 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
759 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
760 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
761 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
762 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
763 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
764 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
765 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
766 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
767 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
768 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
769 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
770 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
771 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
772 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
773 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
774 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
775 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
776 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
777 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
778 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
779 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
780 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
781 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
782 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
783 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
784 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
785 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
786 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
787 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
788 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
789 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
790 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
791 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
792 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
793 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
794 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
795 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
796 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
797 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
798 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
799 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
800 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
801 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
802 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
803 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
804 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
805 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
806 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
807 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
808 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
809 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
810 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
811 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
812 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
813 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
814 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
815 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
816 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
817 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
818 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
819 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
820 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
821 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
822 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
823 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
824 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
825 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
826 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
827 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
828 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
829 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
830 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
831 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
832 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
833 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
834 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
835 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
836 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
837 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
838 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
839 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
840 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
841 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
842 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
843 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
844 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
845 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
846 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
847 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
848 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
849 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
850 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
851 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
852 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
853 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
854 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
855 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
856 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
857 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
858 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
859 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
860 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
861 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
862 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
864 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
865 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
866 PCMCIA_DEVICE_FUNC_ID(2),
869 MODULE_DEVICE_TABLE(pcmcia
, serial_ids
);
871 MODULE_FIRMWARE("cis/PCMLM28.cis");
872 MODULE_FIRMWARE("cis/DP83903.cis");
873 MODULE_FIRMWARE("cis/3CCFEM556.cis");
874 MODULE_FIRMWARE("cis/3CXEM556.cis");
875 MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
876 MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
877 MODULE_FIRMWARE("cis/SW_555_SER.cis");
878 MODULE_FIRMWARE("cis/MT5634ZLX.cis");
879 MODULE_FIRMWARE("cis/COMpad2.cis");
880 MODULE_FIRMWARE("cis/COMpad4.cis");
881 MODULE_FIRMWARE("cis/RS-COM-2P.cis");
883 static struct pcmcia_driver serial_cs_driver
= {
884 .owner
= THIS_MODULE
,
888 .probe
= serial_probe
,
889 .remove
= serial_detach
,
890 .id_table
= serial_ids
,
891 .suspend
= serial_suspend
,
892 .resume
= serial_resume
,
895 static int __init
init_serial_cs(void)
897 return pcmcia_register_driver(&serial_cs_driver
);
900 static void __exit
exit_serial_cs(void)
902 pcmcia_unregister_driver(&serial_cs_driver
);
905 module_init(init_serial_cs
);
906 module_exit(exit_serial_cs
);
908 MODULE_LICENSE("GPL");