drivers/serial/serial_cs.c

   1 /*======================================================================
   2
   3     A driver for PCMCIA serial devices
   4
   5     serial_cs.c 1.134 2002/05/04 05:48:53
   6
   7     The contents of this file are subject to the Mozilla Public
   8     License Version 1.1 (the "License"); you may not use this file
   9     except in compliance with the License. You may obtain a copy of
  10     the License at http://www.mozilla.org/MPL/
  11
  12     Software distributed under the License is distributed on an "AS
  13     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  14     implied. See the License for the specific language governing
  15     rights and limitations under the License.
  16
  17     The initial developer of the original code is David A. Hinds
  18     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  19     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  20
  21     Alternatively, the contents of this file may be used under the
  22     terms of the GNU General Public License version 2 (the "GPL"), in which
  23     case the provisions of the GPL are applicable instead of the
  24     above.  If you wish to allow the use of your version of this file
  25     only under the terms of the GPL and not to allow others to use
  26     your version of this file under the MPL, indicate your decision
  27     by deleting the provisions above and replace them with the notice
  28     and other provisions required by the GPL.  If you do not delete
  29     the provisions above, a recipient may use your version of this
  30     file under either the MPL or the GPL.
  31
  32 ======================================================================*/
  33
  34 #include <linux/module.h>
  35 #include <linux/moduleparam.h>
  36 #include <linux/kernel.h>
  37 #include <linux/init.h>
  38 #include <linux/ptrace.h>
  39 #include <linux/slab.h>
  40 #include <linux/string.h>
  41 #include <linux/timer.h>
  42 #include <linux/serial_core.h>
  43 #include <linux/delay.h>
  44 #include <linux/major.h>
  45 #include <asm/io.h>
  46 #include <asm/system.h>
  47
  48 #include <pcmcia/cs.h>
  49 #include <pcmcia/cistpl.h>
  50 #include <pcmcia/ciscode.h>
  51 #include <pcmcia/ds.h>
  52 #include <pcmcia/cisreg.h>
  53
  54 #include "8250.h"
  55
  56
  57 /*====================================================================*/
  58
  59 /* Parameters that can be set with 'insmod' */
  60
  61 /* Enable the speaker? */
  62 static int do_sound = 1;
  63 /* Skip strict UART tests? */
  64 static int buggy_uart;
  65
  66 module_param(do_sound, int, 0444);
  67 module_param(buggy_uart, int, 0444);
  68
  69 /*====================================================================*/
  70
  71 /* Table of multi-port card ID's */
  72
  73 struct serial_quirk {
  74         unsigned int manfid;
  75         unsigned int prodid;
  76         int multi;              /* 1 = multifunction, > 1 = # ports */
  77         void (*config)(struct pcmcia_device *);
  78         void (*setup)(struct pcmcia_device *, struct uart_port *);
  79         void (*wakeup)(struct pcmcia_device *);
  80         int (*post)(struct pcmcia_device *);
  81 };
  82
  83 struct serial_info {
  84         struct pcmcia_device    *p_dev;
  85         int                     ndev;
  86         int                     multi;
  87         int                     slave;
  88         int                     manfid;
  89         int                     prodid;
  90         int                     c950ctrl;
  91         int                     line[4];
  92         const struct serial_quirk *quirk;
  93 };
  94
  95 struct serial_cfg_mem {
  96         tuple_t tuple;
  97         cisparse_t parse;
  98         u_char buf[256];
  99 };
 100
 101 /*
 102  * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
 103  * manfid 0x0160, 0x0104
 104  * This card appears to have a 14.7456MHz clock.
 105  */
 106 /* Generic Modem: MD55x (GPRS/EDGE) have
 107  * Elan VPU16551 UART with 14.7456MHz oscillator
 108  * manfid 0x015D, 0x4C45
 109  */
 110 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
 111 {
 112         port->uartclk = 14745600;
 113 }
 114
 115 static int quirk_post_ibm(struct pcmcia_device *link)
 116 {
 117         u8 val;
 118         int ret;
 119
 120         ret = pcmcia_read_config_byte(link, 0x800, &val);
 121         if (ret)
 122                 goto failed;
 123
 124         ret = pcmcia_write_config_byte(link, 0x800, val | 1);
 125         if (ret)
 126                 goto failed;
 127         return 0;
 128
 129  failed:
 130         return -ENODEV;
 131 }
 132
 133 /*
 134  * Nokia cards are not really multiport cards.  Shouldn't this
 135  * be handled by setting the quirk entry .multi = 0 | 1 ?
 136  */
 137 static void quirk_config_nokia(struct pcmcia_device *link)
 138 {
 139         struct serial_info *info = link->priv;
 140
 141         if (info->multi > 1)
 142                 info->multi = 1;
 143 }
 144
 145 static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
 146 {
 147         struct serial_info *info = link->priv;
 148
 149         if (info->c950ctrl)
 150                 outb(12, info->c950ctrl + 1);
 151 }
 152
 153 /* request_region? oxsemi branch does no request_region too... */
 154 /*
 155  * This sequence is needed to properly initialize MC45 attached to OXCF950.
 156  * I tried decreasing these msleep()s, but it worked properly (survived
 157  * 1000 stop/start operations) with these timeouts (or bigger).
 158  */
 159 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
 160 {
 161         struct serial_info *info = link->priv;
 162         unsigned int ctrl = info->c950ctrl;
 163
 164         outb(0xA, ctrl + 1);
 165         msleep(100);
 166         outb(0xE, ctrl + 1);
 167         msleep(300);
 168         outb(0xC, ctrl + 1);
 169         msleep(100);
 170         outb(0xE, ctrl + 1);
 171         msleep(200);
 172         outb(0xF, ctrl + 1);
 173         msleep(100);
 174         outb(0xE, ctrl + 1);
 175         msleep(100);
 176         outb(0xC, ctrl + 1);
 177 }
 178
 179 /*
 180  * Socket Dual IO: this enables irq's for second port
 181  */
 182 static void quirk_config_socket(struct pcmcia_device *link)
 183 {
 184         struct serial_info *info = link->priv;
 185
 186         if (info->multi)
 187                 link->conf.Attributes |= CONF_ENABLE_ESR;
 188 }
 189
 190 static const struct serial_quirk quirks[] = {
 191         {
 192                 .manfid = 0x0160,
 193                 .prodid = 0x0104,
 194                 .multi  = -1,
 195                 .setup  = quirk_setup_brainboxes_0104,
 196         }, {
 197                 .manfid = 0x015D,
 198                 .prodid = 0x4C45,
 199                 .multi  = -1,
 200                 .setup  = quirk_setup_brainboxes_0104,
 201         }, {
 202                 .manfid = MANFID_IBM,
 203                 .prodid = ~0,
 204                 .multi  = -1,
 205                 .post   = quirk_post_ibm,
 206         }, {
 207                 .manfid = MANFID_INTEL,
 208                 .prodid = PRODID_INTEL_DUAL_RS232,
 209                 .multi  = 2,
 210         }, {
 211                 .manfid = MANFID_NATINST,
 212                 .prodid = PRODID_NATINST_QUAD_RS232,
 213                 .multi  = 4,
 214         }, {
 215                 .manfid = MANFID_NOKIA,
 216                 .prodid = ~0,
 217                 .multi  = -1,
 218                 .config = quirk_config_nokia,
 219         }, {
 220                 .manfid = MANFID_OMEGA,
 221                 .prodid = PRODID_OMEGA_QSP_100,
 222                 .multi  = 4,
 223         }, {
 224                 .manfid = MANFID_OXSEMI,
 225                 .prodid = ~0,
 226                 .multi  = -1,
 227                 .wakeup = quirk_wakeup_oxsemi,
 228         }, {
 229                 .manfid = MANFID_POSSIO,
 230                 .prodid = PRODID_POSSIO_GCC,
 231                 .multi  = -1,
 232                 .wakeup = quirk_wakeup_possio_gcc,
 233         }, {
 234                 .manfid = MANFID_QUATECH,
 235                 .prodid = PRODID_QUATECH_DUAL_RS232,
 236                 .multi  = 2,
 237         }, {
 238                 .manfid = MANFID_QUATECH,
 239                 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
 240                 .multi  = 2,
 241         }, {
 242                 .manfid = MANFID_QUATECH,
 243                 .prodid = PRODID_QUATECH_DUAL_RS232_G,
 244                 .multi  = 2,
 245         }, {
 246                 .manfid = MANFID_QUATECH,
 247                 .prodid = PRODID_QUATECH_QUAD_RS232,
 248                 .multi  = 4,
 249         }, {
 250                 .manfid = MANFID_SOCKET,
 251                 .prodid = PRODID_SOCKET_DUAL_RS232,
 252                 .multi  = 2,
 253                 .config = quirk_config_socket,
 254         }, {
 255                 .manfid = MANFID_SOCKET,
 256                 .prodid = ~0,
 257                 .multi  = -1,
 258                 .config = quirk_config_socket,
 259         }
 260 };
 261
 262
 263 static int serial_config(struct pcmcia_device * link);
 264
 265
 266 /*======================================================================
 267
 268     After a card is removed, serial_remove() will unregister
 269     the serial device(s), and release the PCMCIA configuration.
 270
 271 ======================================================================*/
 272
 273 static void serial_remove(struct pcmcia_device *link)
 274 {
 275         struct serial_info *info = link->priv;
 276         int i;
 277
 278         dev_dbg(&link->dev, "serial_release\n");
 279
 280         /*
 281          * Recheck to see if the device is still configured.
 282          */
 283         for (i = 0; i < info->ndev; i++)
 284                 serial8250_unregister_port(info->line[i]);
 285
 286         if (!info->slave)
 287                 pcmcia_disable_device(link);
 288 }
 289
 290 static int serial_suspend(struct pcmcia_device *link)
 291 {
 292         struct serial_info *info = link->priv;
 293         int i;
 294
 295         for (i = 0; i < info->ndev; i++)
 296                 serial8250_suspend_port(info->line[i]);
 297
 298         return 0;
 299 }
 300
 301 static int serial_resume(struct pcmcia_device *link)
 302 {
 303         struct serial_info *info = link->priv;
 304         int i;
 305
 306         for (i = 0; i < info->ndev; i++)
 307                 serial8250_resume_port(info->line[i]);
 308
 309         if (info->quirk && info->quirk->wakeup)
 310                 info->quirk->wakeup(link);
 311
 312         return 0;
 313 }
 314
 315 /*======================================================================
 316
 317     serial_attach() creates an "instance" of the driver, allocating
 318     local data structures for one device.  The device is registered
 319     with Card Services.
 320
 321 ======================================================================*/
 322
 323 static int serial_probe(struct pcmcia_device *link)
 324 {
 325         struct serial_info *info;
 326
 327         dev_dbg(&link->dev, "serial_attach()\n");
 328
 329         /* Create new serial device */
 330         info = kzalloc(sizeof (*info), GFP_KERNEL);
 331         if (!info)
 332                 return -ENOMEM;
 333         info->p_dev = link;
 334         link->priv = info;
 335
 336         link->conf.Attributes = CONF_ENABLE_IRQ;
 337         if (do_sound)
 338                 link->conf.Attributes |= CONF_ENABLE_SPKR;
 339
 340         link->conf.IntType = INT_MEMORY_AND_IO;
 341
 342         return serial_config(link);
 343 }
 344
 345 /*======================================================================
 346
 347     This deletes a driver "instance".  The device is de-registered
 348     with Card Services.  If it has been released, all local data
 349     structures are freed.  Otherwise, the structures will be freed
 350     when the device is released.
 351
 352 ======================================================================*/
 353
 354 static void serial_detach(struct pcmcia_device *link)
 355 {
 356         struct serial_info *info = link->priv;
 357
 358         dev_dbg(&link->dev, "serial_detach\n");
 359
 360         /*
 361          * Ensure any outstanding scheduled tasks are completed.
 362          */
 363         flush_scheduled_work();
 364
 365         /*
 366          * Ensure that the ports have been released.
 367          */
 368         serial_remove(link);
 369
 370         /* free bits */
 371         kfree(info);
 372 }
 373
 374 /*====================================================================*/
 375
 376 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 377                         unsigned int iobase, int irq)
 378 {
 379         struct uart_port port;
 380         int line;
 381
 382         memset(&port, 0, sizeof (struct uart_port));
 383         port.iobase = iobase;
 384         port.irq = irq;
 385         port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 386         port.uartclk = 1843200;
 387         port.dev = &handle->dev;
 388         if (buggy_uart)
 389                 port.flags |= UPF_BUGGY_UART;
 390
 391         if (info->quirk && info->quirk->setup)
 392                 info->quirk->setup(handle, &port);
 393
 394         line = serial8250_register_port(&port);
 395         if (line < 0) {
 396                 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
 397                        "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
 398                 return -EINVAL;
 399         }
 400
 401         info->line[info->ndev] = line;
 402         info->ndev++;
 403
 404         return 0;
 405 }
 406
 407 /*====================================================================*/
 408
 409 static int pfc_config(struct pcmcia_device *p_dev)
 410 {
 411         unsigned int port = 0;
 412         struct serial_info *info = p_dev->priv;
 413
 414         if ((p_dev->resource[1]->end != 0) &&
 415                 (resource_size(p_dev->resource[1]) == 8)) {
 416                 port = p_dev->resource[1]->start;
 417                 info->slave = 1;
 418         } else if ((info->manfid == MANFID_OSITECH) &&
 419                 (resource_size(p_dev->resource[0]) == 0x40)) {
 420                 port = p_dev->resource[0]->start + 0x28;
 421                 info->slave = 1;
 422         }
 423         if (info->slave)
 424                 return setup_serial(p_dev, info, port, p_dev->irq);
 425
 426         dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
 427         return -ENODEV;
 428 }
 429
 430 static int simple_config_check(struct pcmcia_device *p_dev,
 431                                cistpl_cftable_entry_t *cf,
 432                                cistpl_cftable_entry_t *dflt,
 433                                unsigned int vcc,
 434                                void *priv_data)
 435 {
 436         static const int size_table[2] = { 8, 16 };
 437         int *try = priv_data;
 438
 439         if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
 440                 p_dev->vpp =
 441                         cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 442
 443         p_dev->io_lines = ((*try & 0x1) == 0) ?
 444                         16 : cf->io.flags & CISTPL_IO_LINES_MASK;
 445
 446         if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
 447             && (cf->io.win[0].base != 0)) {
 448                 p_dev->resource[0]->start = cf->io.win[0].base;
 449                 if (!pcmcia_request_io(p_dev))
 450                         return 0;
 451         }
 452         return -EINVAL;
 453 }
 454
 455 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
 456                                         cistpl_cftable_entry_t *cf,
 457                                         cistpl_cftable_entry_t *dflt,
 458                                         unsigned int vcc,
 459                                         void *priv_data)
 460 {
 461         static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 462         int j;
 463
 464         if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
 465                 for (j = 0; j < 5; j++) {
 466                         p_dev->resource[0]->start = base[j];
 467                         p_dev->io_lines = base[j] ? 16 : 3;
 468                         if (!pcmcia_request_io(p_dev))
 469                                 return 0;
 470                 }
 471         }
 472         return -ENODEV;
 473 }
 474
 475 static int simple_config(struct pcmcia_device *link)
 476 {
 477         struct serial_info *info = link->priv;
 478         int i = -ENODEV, try;
 479
 480         link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 481         link->resource[0]->end = 8;
 482
 483         /* First pass: look for a config entry that looks normal.
 484          * Two tries: without IO aliases, then with aliases */
 485         for (try = 0; try < 4; try++)
 486                 if (!pcmcia_loop_config(link, simple_config_check, &try))
 487                         goto found_port;
 488
 489         /* Second pass: try to find an entry that isn't picky about
 490            its base address, then try to grab any standard serial port
 491            address, and finally try to get any free port. */
 492         if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
 493                 goto found_port;
 494
 495         dev_warn(&link->dev, "no usable port range found, giving up\n");
 496         return -1;
 497
 498 found_port:
 499         if (info->multi && (info->manfid == MANFID_3COM))
 500                 link->conf.ConfigIndex &= ~(0x08);
 501
 502         /*
 503          * Apply any configuration quirks.
 504          */
 505         if (info->quirk && info->quirk->config)
 506                 info->quirk->config(link);
 507
 508         i = pcmcia_request_configuration(link, &link->conf);
 509         if (i != 0)
 510                 return -1;
 511         return setup_serial(link, info, link->resource[0]->start, link->irq);
 512 }
 513
 514 static int multi_config_check(struct pcmcia_device *p_dev,
 515                               cistpl_cftable_entry_t *cf,
 516                               cistpl_cftable_entry_t *dflt,
 517                               unsigned int vcc,
 518                               void *priv_data)
 519 {
 520         int *base2 = priv_data;
 521
 522         /* The quad port cards have bad CIS's, so just look for a
 523            window larger than 8 ports and assume it will be right */
 524         if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
 525                 p_dev->resource[0]->start = cf->io.win[0].base;
 526                 p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
 527                 if (!pcmcia_request_io(p_dev)) {
 528                         *base2 = p_dev->resource[0]->start + 8;
 529                         return 0;
 530                 }
 531         }
 532         return -ENODEV;
 533 }
 534
 535 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
 536                                        cistpl_cftable_entry_t *cf,
 537                                        cistpl_cftable_entry_t *dflt,
 538                                        unsigned int vcc,
 539                                        void *priv_data)
 540 {
 541         int *base2 = priv_data;
 542
 543         if (cf->io.nwin == 2) {
 544                 p_dev->resource[0]->start = cf->io.win[0].base;
 545                 p_dev->resource[1]->start = cf->io.win[1].base;
 546                 p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
 547                 if (!pcmcia_request_io(p_dev)) {
 548                         *base2 = p_dev->resource[1]->start;
 549                         return 0;
 550                 }
 551         }
 552         return -ENODEV;
 553 }
 554
 555 static int multi_config(struct pcmcia_device *link)
 556 {
 557         struct serial_info *info = link->priv;
 558         int i, base2 = 0;
 559
 560         /* First, look for a generic full-sized window */
 561         link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 562         link->resource[0]->end = info->multi * 8;
 563         if (pcmcia_loop_config(link, multi_config_check, &base2)) {
 564                 /* If that didn't work, look for two windows */
 565                 link->resource[0]->end = link->resource[1]->end = 8;
 566                 info->multi = 2;
 567                 if (pcmcia_loop_config(link, multi_config_check_notpicky,
 568                                        &base2)) {
 569                         dev_warn(&link->dev, "no usable port range "
 570                                "found, giving up\n");
 571                         return -ENODEV;
 572                 }
 573         }
 574
 575         if (!link->irq)
 576                 dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
 577
 578         /*
 579          * Apply any configuration quirks.
 580          */
 581         if (info->quirk && info->quirk->config)
 582                 info->quirk->config(link);
 583
 584         i = pcmcia_request_configuration(link, &link->conf);
 585         if (i != 0)
 586                 return -ENODEV;
 587
 588         /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
 589          * 8 registers are for the UART, the others are extra registers.
 590          * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
 591          */
 592         if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
 593                                 info->prodid == PRODID_POSSIO_GCC)) {
 594                 int err;
 595
 596                 if (link->conf.ConfigIndex == 1 ||
 597                     link->conf.ConfigIndex == 3) {
 598                         err = setup_serial(link, info, base2,
 599                                         link->irq);
 600                         base2 = link->resource[0]->start;;
 601                 } else {
 602                         err = setup_serial(link, info, link->resource[0]->start,
 603                                         link->irq);
 604                 }
 605                 info->c950ctrl = base2;
 606
 607                 /*
 608                  * FIXME: We really should wake up the port prior to
 609                  * handing it over to the serial layer.
 610                  */
 611                 if (info->quirk && info->quirk->wakeup)
 612                         info->quirk->wakeup(link);
 613
 614                 return 0;
 615         }
 616
 617         setup_serial(link, info, link->resource[0]->start, link->irq);
 618         for (i = 0; i < info->multi - 1; i++)
 619                 setup_serial(link, info, base2 + (8 * i),
 620                                 link->irq);
 621         return 0;
 622 }
 623
 624 static int serial_check_for_multi(struct pcmcia_device *p_dev,
 625                                   cistpl_cftable_entry_t *cf,
 626                                   cistpl_cftable_entry_t *dflt,
 627                                   unsigned int vcc,
 628                                   void *priv_data)
 629 {
 630         struct serial_info *info = p_dev->priv;
 631
 632         if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
 633                 info->multi = cf->io.win[0].len >> 3;
 634
 635         if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
 636                 (cf->io.win[1].len == 8))
 637                 info->multi = 2;
 638
 639         return 0; /* break */
 640 }
 641
 642
 643 /*======================================================================
 644
 645     serial_config() is scheduled to run after a CARD_INSERTION event
 646     is received, to configure the PCMCIA socket, and to make the
 647     serial device available to the system.
 648
 649 ======================================================================*/
 650
 651 static int serial_config(struct pcmcia_device * link)
 652 {
 653         struct serial_info *info = link->priv;
 654         int i;
 655
 656         dev_dbg(&link->dev, "serial_config\n");
 657
 658         /* Is this a compliant multifunction card? */
 659         info->multi = (link->socket->functions > 1);
 660
 661         /* Is this a multiport card? */
 662         info->manfid = link->manf_id;
 663         info->prodid = link->card_id;
 664
 665         for (i = 0; i < ARRAY_SIZE(quirks); i++)
 666                 if ((quirks[i].manfid == ~0 ||
 667                      quirks[i].manfid == info->manfid) &&
 668                     (quirks[i].prodid == ~0 ||
 669                      quirks[i].prodid == info->prodid)) {
 670                         info->quirk = &quirks[i];
 671                         break;
 672                 }
 673
 674         /* Another check for dual-serial cards: look for either serial or
 675            multifunction cards that ask for appropriate IO port ranges */
 676         if ((info->multi == 0) &&
 677             (link->has_func_id) &&
 678             (link->socket->pcmcia_pfc == 0) &&
 679             ((link->func_id == CISTPL_FUNCID_MULTI) ||
 680              (link->func_id == CISTPL_FUNCID_SERIAL)))
 681                 pcmcia_loop_config(link, serial_check_for_multi, info);
 682
 683         /*
 684          * Apply any multi-port quirk.
 685          */
 686         if (info->quirk && info->quirk->multi != -1)
 687                 info->multi = info->quirk->multi;
 688
 689         dev_info(&link->dev,
 690                 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
 691                 link->manf_id, link->card_id,
 692                 link->socket->pcmcia_pfc, info->multi, info->quirk);
 693         if (link->socket->pcmcia_pfc)
 694                 i = pfc_config(link);
 695         else if (info->multi > 1)
 696                 i = multi_config(link);
 697         else
 698                 i = simple_config(link);
 699
 700         if (i || info->ndev == 0)
 701                 goto failed;
 702
 703         /*
 704          * Apply any post-init quirk.  FIXME: This should really happen
 705          * before we register the port, since it might already be in use.
 706          */
 707         if (info->quirk && info->quirk->post)
 708                 if (info->quirk->post(link))
 709                         goto failed;
 710
 711         return 0;
 712
 713 failed:
 714         dev_warn(&link->dev, "failed to initialize\n");
 715         serial_remove(link);
 716         return -ENODEV;
 717 }
 718
 719 static struct pcmcia_device_id serial_ids[] = {
 720         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
 721         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
 722         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
 723         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
 724         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
 725         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
 726         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
 727         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
 728         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
 729         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
 730         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
 731         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
 732         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
 733         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
 734         PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
 735         PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
 736         PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
 737         PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
 738         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
 739         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
 740         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
 741         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
 742         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
 743         PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
 744         PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
 745         PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
 746         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
 747         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
 748         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
 749         PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
 750         PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
 751         PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
 752         PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 753         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
 754         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
 755         PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
 756         PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
 757         PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 758         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
 759         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
 760         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
 761         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
 762         PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
 763         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
 764         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
 765         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
 766         PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
 767         PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card       ", 0xb569a6e5, 0x5bd4ff2c),
 768         PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
 769         PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
 770         PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
 771         PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
 772         PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
 773         PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
 774         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
 775         PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
 776         PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
 777         PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
 778         PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
 779         PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
 780         PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
 781         PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
 782         PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
 783         PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
 784         PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
 785         PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
 786         PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
 787         PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
 788         PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
 789         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
 790         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
 791         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
 792         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
 793         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
 794         PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
 795         PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
 796         PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
 797         PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
 798         PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
 799         PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
 800         PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
 801         PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
 802         PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
 803         PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
 804         PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
 805         PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
 806         PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
 807         PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
 808         PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
 809         PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
 810         PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
 811         PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
 812         PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
 813         PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
 814         PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
 815         PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
 816         PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
 817         PCMCIA_DEVICE_PROD_ID12("OEM      ", "C288MX     ", 0xb572d360, 0xd2385b7a),
 818         PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
 819         PCMCIA_DEVICE_PROD_ID12("PCMCIA   ", "C336MX     ", 0x99bcafe9, 0xaa25bcab),
 820         PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
 821         PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
 822         PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
 823         PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
 824         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
 825         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
 826         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
 827         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
 828         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
 829         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
 830         PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
 831         PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
 832         PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
 833         PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
 834         PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
 835         PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
 836         PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
 837         PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
 838         PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"),  /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
 839         PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
 840         PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
 841         PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
 842         PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
 843         PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
 844         PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
 845         PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
 846         PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
 847         PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100  1.00.",0x19ca78af,0xf964f42b),
 848         PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
 849         PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232  1.00.",0x19ca78af,0x69fb7490),
 850         PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
 851         PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
 852         PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
 853         PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
 854         PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
 855         PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
 856         PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
 857         PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
 858         PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
 859         PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
 860         PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
 861         PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
 862         PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
 863         PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
 864         PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
 865         PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
 866         PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
 867         PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
 868         PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
 869         PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
 870         PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
 871         PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
 872         /* too generic */
 873         /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
 874         /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
 875         PCMCIA_DEVICE_FUNC_ID(2),
 876         PCMCIA_DEVICE_NULL,
 877 };
 878 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
 879
 880 MODULE_FIRMWARE("cis/PCMLM28.cis");
 881 MODULE_FIRMWARE("cis/DP83903.cis");
 882 MODULE_FIRMWARE("cis/3CCFEM556.cis");
 883 MODULE_FIRMWARE("cis/3CXEM556.cis");
 884 MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
 885 MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
 886 MODULE_FIRMWARE("cis/SW_555_SER.cis");
 887 MODULE_FIRMWARE("cis/MT5634ZLX.cis");
 888 MODULE_FIRMWARE("cis/COMpad2.cis");
 889 MODULE_FIRMWARE("cis/COMpad4.cis");
 890 MODULE_FIRMWARE("cis/RS-COM-2P.cis");
 891
 892 static struct pcmcia_driver serial_cs_driver = {
 893         .owner          = THIS_MODULE,
 894         .drv            = {
 895                 .name   = "serial_cs",
 896         },
 897         .probe          = serial_probe,
 898         .remove         = serial_detach,
 899         .id_table       = serial_ids,
 900         .suspend        = serial_suspend,
 901         .resume         = serial_resume,
 902 };
 903
 904 static int __init init_serial_cs(void)
 905 {
 906         return pcmcia_register_driver(&serial_cs_driver);
 907 }
 908
 909 static void __exit exit_serial_cs(void)
 910 {
 911         pcmcia_unregister_driver(&serial_cs_driver);
 912 }
 913
 914 module_init(init_serial_cs);
 915 module_exit(exit_serial_cs);
 916
 917 MODULE_LICENSE("GPL");