]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/blob - drivers/serial/sunsu.c
projects / mirror_ubuntu-hirsute-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial
[mirror_ubuntu-hirsute-kernel.git] / drivers / serial / sunsu.c
1 /* $Id: su.c,v 1.55 2002/01/08 16:00:16 davem Exp $
2 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
3 *
4 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
5 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
6 *
7 * This is mainly a variation of 8250.c, credits go to authors mentioned
8 * therein. In fact this driver should be merged into the generic 8250.c
9 * infrastructure perhaps using a 8250_sparc.c module.
10 *
11 * Fixed to use tty_get_baud_rate().
12 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
13 *
14 * Converted to new 2.5.x UART layer.
15 * David S. Miller (davem@davemloft.net), 2002-Jul-29
16 */
17
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/sched.h>
21 #include <linux/spinlock.h>
22 #include <linux/errno.h>
23 #include <linux/tty.h>
24 #include <linux/tty_flip.h>
25 #include <linux/major.h>
26 #include <linux/string.h>
27 #include <linux/ptrace.h>
28 #include <linux/ioport.h>
29 #include <linux/circ_buf.h>
30 #include <linux/serial.h>
31 #include <linux/sysrq.h>
32 #include <linux/console.h>
33 #ifdef CONFIG_SERIO
34 #include <linux/serio.h>
35 #endif
36 #include <linux/serial_reg.h>
37 #include <linux/init.h>
38 #include <linux/delay.h>
39
40 #include <asm/io.h>
41 #include <asm/irq.h>
42 #include <asm/prom.h>
43 #include <asm/of_device.h>
44
45 #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
46 #define SUPPORT_SYSRQ
47 #endif
48
49 #include <linux/serial_core.h>
50
51 #include "suncore.h"
52
53 /* We are on a NS PC87303 clocked with 24.0 MHz, which results
54 * in a UART clock of 1.8462 MHz.
55 */
56 #define SU_BASE_BAUD (1846200 / 16)
57
58 enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
59 static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
60
61 /*
62 * Here we define the default xmit fifo size used for each type of UART.
63 */
64 static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
65 { "unknown", 1, 0 },
66 { "8250", 1, 0 },
67 { "16450", 1, 0 },
68 { "16550", 1, 0 },
69 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
70 { "Cirrus", 1, 0 },
71 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
72 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
73 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
74 { "Startech", 1, 0 },
75 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
76 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
77 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
78 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
79 };
80
81 struct uart_sunsu_port {
82 struct uart_port port;
83 unsigned char acr;
84 unsigned char ier;
85 unsigned short rev;
86 unsigned char lcr;
87 unsigned int lsr_break_flag;
88 unsigned int cflag;
89
90 /* Probing information. */
91 enum su_type su_type;
92 unsigned int type_probed; /* XXX Stupid */
93 unsigned long reg_size;
94
95 #ifdef CONFIG_SERIO
96 struct serio serio;
97 int serio_open;
98 #endif
99 };
100
101 static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
102 {
103 offset <<= up->port.regshift;
104
105 switch (up->port.iotype) {
106 case UPIO_HUB6:
107 outb(up->port.hub6 - 1 + offset, up->port.iobase);
108 return inb(up->port.iobase + 1);
109
110 case UPIO_MEM:
111 return readb(up->port.membase + offset);
112
113 default:
114 return inb(up->port.iobase + offset);
115 }
116 }
117
118 static void serial_out(struct uart_sunsu_port *up, int offset, int value)
119 {
120 #ifndef CONFIG_SPARC64
121 /*
122 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
123 * connected with a gate then go to SlavIO. When IRQ4 goes tristated
124 * gate outputs a logical one. Since we use level triggered interrupts
125 * we have lockup and watchdog reset. We cannot mask IRQ because
126 * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
127 * This problem is similar to what Alpha people suffer, see serial.c.
128 */
129 if (offset == UART_MCR)
130 value |= UART_MCR_OUT2;
131 #endif
132 offset <<= up->port.regshift;
133
134 switch (up->port.iotype) {
135 case UPIO_HUB6:
136 outb(up->port.hub6 - 1 + offset, up->port.iobase);
137 outb(value, up->port.iobase + 1);
138 break;
139
140 case UPIO_MEM:
141 writeb(value, up->port.membase + offset);
142 break;
143
144 default:
145 outb(value, up->port.iobase + offset);
146 }
147 }
148
149 /*
150 * We used to support using pause I/O for certain machines. We
151 * haven't supported this for a while, but just in case it's badly
152 * needed for certain old 386 machines, I've left these #define's
153 * in....
154 */
155 #define serial_inp(up, offset) serial_in(up, offset)
156 #define serial_outp(up, offset, value) serial_out(up, offset, value)
157
158
159 /*
160 * For the 16C950
161 */
162 static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
163 {
164 serial_out(up, UART_SCR, offset);
165 serial_out(up, UART_ICR, value);
166 }
167
168 #if 0 /* Unused currently */
169 static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
170 {
171 unsigned int value;
172
173 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
174 serial_out(up, UART_SCR, offset);
175 value = serial_in(up, UART_ICR);
176 serial_icr_write(up, UART_ACR, up->acr);
177
178 return value;
179 }
180 #endif
181
182 #ifdef CONFIG_SERIAL_8250_RSA
183 /*
184 * Attempts to turn on the RSA FIFO. Returns zero on failure.
185 * We set the port uart clock rate if we succeed.
186 */
187 static int __enable_rsa(struct uart_sunsu_port *up)
188 {
189 unsigned char mode;
190 int result;
191
192 mode = serial_inp(up, UART_RSA_MSR);
193 result = mode & UART_RSA_MSR_FIFO;
194
195 if (!result) {
196 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
197 mode = serial_inp(up, UART_RSA_MSR);
198 result = mode & UART_RSA_MSR_FIFO;
199 }
200
201 if (result)
202 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
203
204 return result;
205 }
206
207 static void enable_rsa(struct uart_sunsu_port *up)
208 {
209 if (up->port.type == PORT_RSA) {
210 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
211 spin_lock_irq(&up->port.lock);
212 __enable_rsa(up);
213 spin_unlock_irq(&up->port.lock);
214 }
215 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
216 serial_outp(up, UART_RSA_FRR, 0);
217 }
218 }
219
220 /*
221 * Attempts to turn off the RSA FIFO. Returns zero on failure.
222 * It is unknown why interrupts were disabled in here. However,
223 * the caller is expected to preserve this behaviour by grabbing
224 * the spinlock before calling this function.
225 */
226 static void disable_rsa(struct uart_sunsu_port *up)
227 {
228 unsigned char mode;
229 int result;
230
231 if (up->port.type == PORT_RSA &&
232 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
233 spin_lock_irq(&up->port.lock);
234
235 mode = serial_inp(up, UART_RSA_MSR);
236 result = !(mode & UART_RSA_MSR_FIFO);
237
238 if (!result) {
239 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
240 mode = serial_inp(up, UART_RSA_MSR);
241 result = !(mode & UART_RSA_MSR_FIFO);
242 }
243
244 if (result)
245 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
246 spin_unlock_irq(&up->port.lock);
247 }
248 }
249 #endif /* CONFIG_SERIAL_8250_RSA */
250
251 static inline void __stop_tx(struct uart_sunsu_port *p)
252 {
253 if (p->ier & UART_IER_THRI) {
254 p->ier &= ~UART_IER_THRI;
255 serial_out(p, UART_IER, p->ier);
256 }
257 }
258
259 static void sunsu_stop_tx(struct uart_port *port)
260 {
261 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
262
263 __stop_tx(up);
264
265 /*
266 * We really want to stop the transmitter from sending.
267 */
268 if (up->port.type == PORT_16C950) {
269 up->acr |= UART_ACR_TXDIS;
270 serial_icr_write(up, UART_ACR, up->acr);
271 }
272 }
273
274 static void sunsu_start_tx(struct uart_port *port)
275 {
276 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
277
278 if (!(up->ier & UART_IER_THRI)) {
279 up->ier |= UART_IER_THRI;
280 serial_out(up, UART_IER, up->ier);
281 }
282
283 /*
284 * Re-enable the transmitter if we disabled it.
285 */
286 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
287 up->acr &= ~UART_ACR_TXDIS;
288 serial_icr_write(up, UART_ACR, up->acr);
289 }
290 }
291
292 static void sunsu_stop_rx(struct uart_port *port)
293 {
294 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
295
296 up->ier &= ~UART_IER_RLSI;
297 up->port.read_status_mask &= ~UART_LSR_DR;
298 serial_out(up, UART_IER, up->ier);
299 }
300
301 static void sunsu_enable_ms(struct uart_port *port)
302 {
303 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
304 unsigned long flags;
305
306 spin_lock_irqsave(&up->port.lock, flags);
307 up->ier |= UART_IER_MSI;
308 serial_out(up, UART_IER, up->ier);
309 spin_unlock_irqrestore(&up->port.lock, flags);
310 }
311
312 static struct tty_struct *
313 receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs *regs)
314 {
315 struct tty_struct *tty = up->port.info->tty;
316 unsigned char ch, flag;
317 int max_count = 256;
318 int saw_console_brk = 0;
319
320 do {
321 ch = serial_inp(up, UART_RX);
322 flag = TTY_NORMAL;
323 up->port.icount.rx++;
324
325 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
326 UART_LSR_FE | UART_LSR_OE))) {
327 /*
328 * For statistics only
329 */
330 if (*status & UART_LSR_BI) {
331 *status &= ~(UART_LSR_FE | UART_LSR_PE);
332 up->port.icount.brk++;
333 if (up->port.cons != NULL &&
334 up->port.line == up->port.cons->index)
335 saw_console_brk = 1;
336 /*
337 * We do the SysRQ and SAK checking
338 * here because otherwise the break
339 * may get masked by ignore_status_mask
340 * or read_status_mask.
341 */
342 if (uart_handle_break(&up->port))
343 goto ignore_char;
344 } else if (*status & UART_LSR_PE)
345 up->port.icount.parity++;
346 else if (*status & UART_LSR_FE)
347 up->port.icount.frame++;
348 if (*status & UART_LSR_OE)
349 up->port.icount.overrun++;
350
351 /*
352 * Mask off conditions which should be ingored.
353 */
354 *status &= up->port.read_status_mask;
355
356 if (up->port.cons != NULL &&
357 up->port.line == up->port.cons->index) {
358 /* Recover the break flag from console xmit */
359 *status |= up->lsr_break_flag;
360 up->lsr_break_flag = 0;
361 }
362
363 if (*status & UART_LSR_BI) {
364 flag = TTY_BREAK;
365 } else if (*status & UART_LSR_PE)
366 flag = TTY_PARITY;
367 else if (*status & UART_LSR_FE)
368 flag = TTY_FRAME;
369 }
370 if (uart_handle_sysrq_char(&up->port, ch, regs))
371 goto ignore_char;
372 if ((*status & up->port.ignore_status_mask) == 0)
373 tty_insert_flip_char(tty, ch, flag);
374 if (*status & UART_LSR_OE)
375 /*
376 * Overrun is special, since it's reported
377 * immediately, and doesn't affect the current
378 * character.
379 */
380 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
381 ignore_char:
382 *status = serial_inp(up, UART_LSR);
383 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
384
385 if (saw_console_brk)
386 sun_do_break();
387
388 return tty;
389 }
390
391 static void transmit_chars(struct uart_sunsu_port *up)
392 {
393 struct circ_buf *xmit = &up->port.info->xmit;
394 int count;
395
396 if (up->port.x_char) {
397 serial_outp(up, UART_TX, up->port.x_char);
398 up->port.icount.tx++;
399 up->port.x_char = 0;
400 return;
401 }
402 if (uart_tx_stopped(&up->port)) {
403 sunsu_stop_tx(&up->port);
404 return;
405 }
406 if (uart_circ_empty(xmit)) {
407 __stop_tx(up);
408 return;
409 }
410
411 count = up->port.fifosize;
412 do {
413 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
414 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
415 up->port.icount.tx++;
416 if (uart_circ_empty(xmit))
417 break;
418 } while (--count > 0);
419
420 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
421 uart_write_wakeup(&up->port);
422
423 if (uart_circ_empty(xmit))
424 __stop_tx(up);
425 }
426
427 static void check_modem_status(struct uart_sunsu_port *up)
428 {
429 int status;
430
431 status = serial_in(up, UART_MSR);
432
433 if ((status & UART_MSR_ANY_DELTA) == 0)
434 return;
435
436 if (status & UART_MSR_TERI)
437 up->port.icount.rng++;
438 if (status & UART_MSR_DDSR)
439 up->port.icount.dsr++;
440 if (status & UART_MSR_DDCD)
441 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
442 if (status & UART_MSR_DCTS)
443 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
444
445 wake_up_interruptible(&up->port.info->delta_msr_wait);
446 }
447
448 static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id, struct pt_regs *regs)
449 {
450 struct uart_sunsu_port *up = dev_id;
451 unsigned long flags;
452 unsigned char status;
453
454 spin_lock_irqsave(&up->port.lock, flags);
455
456 do {
457 struct tty_struct *tty;
458
459 status = serial_inp(up, UART_LSR);
460 tty = NULL;
461 if (status & UART_LSR_DR)
462 tty = receive_chars(up, &status, regs);
463 check_modem_status(up);
464 if (status & UART_LSR_THRE)
465 transmit_chars(up);
466
467 spin_unlock_irqrestore(&up->port.lock, flags);
468
469 if (tty)
470 tty_flip_buffer_push(tty);
471
472 spin_lock_irqsave(&up->port.lock, flags);
473
474 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
475
476 spin_unlock_irqrestore(&up->port.lock, flags);
477
478 return IRQ_HANDLED;
479 }
480
481 /* Separate interrupt handling path for keyboard/mouse ports. */
482
483 static void
484 sunsu_change_speed(struct uart_port *port, unsigned int cflag,
485 unsigned int iflag, unsigned int quot);
486
487 static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
488 {
489 unsigned int cur_cflag = up->cflag;
490 int quot, new_baud;
491
492 up->cflag &= ~CBAUD;
493 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
494
495 quot = up->port.uartclk / (16 * new_baud);
496
497 sunsu_change_speed(&up->port, up->cflag, 0, quot);
498 }
499
500 static void receive_kbd_ms_chars(struct uart_sunsu_port *up, struct pt_regs *regs, int is_break)
501 {
502 do {
503 unsigned char ch = serial_inp(up, UART_RX);
504
505 /* Stop-A is handled by drivers/char/keyboard.c now. */
506 if (up->su_type == SU_PORT_KBD) {
507 #ifdef CONFIG_SERIO
508 serio_interrupt(&up->serio, ch, 0, regs);
509 #endif
510 } else if (up->su_type == SU_PORT_MS) {
511 int ret = suncore_mouse_baud_detection(ch, is_break);
512
513 switch (ret) {
514 case 2:
515 sunsu_change_mouse_baud(up);
516 /* fallthru */
517 case 1:
518 break;
519
520 case 0:
521 #ifdef CONFIG_SERIO
522 serio_interrupt(&up->serio, ch, 0, regs);
523 #endif
524 break;
525 };
526 }
527 } while (serial_in(up, UART_LSR) & UART_LSR_DR);
528 }
529
530 static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id, struct pt_regs *regs)
531 {
532 struct uart_sunsu_port *up = dev_id;
533
534 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
535 unsigned char status = serial_inp(up, UART_LSR);
536
537 if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
538 receive_kbd_ms_chars(up, regs,
539 (status & UART_LSR_BI) != 0);
540 }
541
542 return IRQ_HANDLED;
543 }
544
545 static unsigned int sunsu_tx_empty(struct uart_port *port)
546 {
547 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
548 unsigned long flags;
549 unsigned int ret;
550
551 spin_lock_irqsave(&up->port.lock, flags);
552 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
553 spin_unlock_irqrestore(&up->port.lock, flags);
554
555 return ret;
556 }
557
558 static unsigned int sunsu_get_mctrl(struct uart_port *port)
559 {
560 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
561 unsigned char status;
562 unsigned int ret;
563
564 status = serial_in(up, UART_MSR);
565
566 ret = 0;
567 if (status & UART_MSR_DCD)
568 ret |= TIOCM_CAR;
569 if (status & UART_MSR_RI)
570 ret |= TIOCM_RNG;
571 if (status & UART_MSR_DSR)
572 ret |= TIOCM_DSR;
573 if (status & UART_MSR_CTS)
574 ret |= TIOCM_CTS;
575 return ret;
576 }
577
578 static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
579 {
580 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
581 unsigned char mcr = 0;
582
583 if (mctrl & TIOCM_RTS)
584 mcr |= UART_MCR_RTS;
585 if (mctrl & TIOCM_DTR)
586 mcr |= UART_MCR_DTR;
587 if (mctrl & TIOCM_OUT1)
588 mcr |= UART_MCR_OUT1;
589 if (mctrl & TIOCM_OUT2)
590 mcr |= UART_MCR_OUT2;
591 if (mctrl & TIOCM_LOOP)
592 mcr |= UART_MCR_LOOP;
593
594 serial_out(up, UART_MCR, mcr);
595 }
596
597 static void sunsu_break_ctl(struct uart_port *port, int break_state)
598 {
599 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
600 unsigned long flags;
601
602 spin_lock_irqsave(&up->port.lock, flags);
603 if (break_state == -1)
604 up->lcr |= UART_LCR_SBC;
605 else
606 up->lcr &= ~UART_LCR_SBC;
607 serial_out(up, UART_LCR, up->lcr);
608 spin_unlock_irqrestore(&up->port.lock, flags);
609 }
610
611 static int sunsu_startup(struct uart_port *port)
612 {
613 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
614 unsigned long flags;
615 int retval;
616
617 if (up->port.type == PORT_16C950) {
618 /* Wake up and initialize UART */
619 up->acr = 0;
620 serial_outp(up, UART_LCR, 0xBF);
621 serial_outp(up, UART_EFR, UART_EFR_ECB);
622 serial_outp(up, UART_IER, 0);
623 serial_outp(up, UART_LCR, 0);
624 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
625 serial_outp(up, UART_LCR, 0xBF);
626 serial_outp(up, UART_EFR, UART_EFR_ECB);
627 serial_outp(up, UART_LCR, 0);
628 }
629
630 #ifdef CONFIG_SERIAL_8250_RSA
631 /*
632 * If this is an RSA port, see if we can kick it up to the
633 * higher speed clock.
634 */
635 enable_rsa(up);
636 #endif
637
638 /*
639 * Clear the FIFO buffers and disable them.
640 * (they will be reenabled in set_termios())
641 */
642 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
643 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
644 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
645 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
646 serial_outp(up, UART_FCR, 0);
647 }
648
649 /*
650 * Clear the interrupt registers.
651 */
652 (void) serial_inp(up, UART_LSR);
653 (void) serial_inp(up, UART_RX);
654 (void) serial_inp(up, UART_IIR);
655 (void) serial_inp(up, UART_MSR);
656
657 /*
658 * At this point, there's no way the LSR could still be 0xff;
659 * if it is, then bail out, because there's likely no UART
660 * here.
661 */
662 if (!(up->port.flags & UPF_BUGGY_UART) &&
663 (serial_inp(up, UART_LSR) == 0xff)) {
664 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
665 return -ENODEV;
666 }
667
668 if (up->su_type != SU_PORT_PORT) {
669 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
670 IRQF_SHARED, su_typev[up->su_type], up);
671 } else {
672 retval = request_irq(up->port.irq, sunsu_serial_interrupt,
673 IRQF_SHARED, su_typev[up->su_type], up);
674 }
675 if (retval) {
676 printk("su: Cannot register IRQ %d\n", up->port.irq);
677 return retval;
678 }
679
680 /*
681 * Now, initialize the UART
682 */
683 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
684
685 spin_lock_irqsave(&up->port.lock, flags);
686
687 up->port.mctrl |= TIOCM_OUT2;
688
689 sunsu_set_mctrl(&up->port, up->port.mctrl);
690 spin_unlock_irqrestore(&up->port.lock, flags);
691
692 /*
693 * Finally, enable interrupts. Note: Modem status interrupts
694 * are set via set_termios(), which will be occurring imminently
695 * anyway, so we don't enable them here.
696 */
697 up->ier = UART_IER_RLSI | UART_IER_RDI;
698 serial_outp(up, UART_IER, up->ier);
699
700 if (up->port.flags & UPF_FOURPORT) {
701 unsigned int icp;
702 /*
703 * Enable interrupts on the AST Fourport board
704 */
705 icp = (up->port.iobase & 0xfe0) | 0x01f;
706 outb_p(0x80, icp);
707 (void) inb_p(icp);
708 }
709
710 /*
711 * And clear the interrupt registers again for luck.
712 */
713 (void) serial_inp(up, UART_LSR);
714 (void) serial_inp(up, UART_RX);
715 (void) serial_inp(up, UART_IIR);
716 (void) serial_inp(up, UART_MSR);
717
718 return 0;
719 }
720
721 static void sunsu_shutdown(struct uart_port *port)
722 {
723 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
724 unsigned long flags;
725
726 /*
727 * Disable interrupts from this port
728 */
729 up->ier = 0;
730 serial_outp(up, UART_IER, 0);
731
732 spin_lock_irqsave(&up->port.lock, flags);
733 if (up->port.flags & UPF_FOURPORT) {
734 /* reset interrupts on the AST Fourport board */
735 inb((up->port.iobase & 0xfe0) | 0x1f);
736 up->port.mctrl |= TIOCM_OUT1;
737 } else
738 up->port.mctrl &= ~TIOCM_OUT2;
739
740 sunsu_set_mctrl(&up->port, up->port.mctrl);
741 spin_unlock_irqrestore(&up->port.lock, flags);
742
743 /*
744 * Disable break condition and FIFOs
745 */
746 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
747 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
748 UART_FCR_CLEAR_RCVR |
749 UART_FCR_CLEAR_XMIT);
750 serial_outp(up, UART_FCR, 0);
751
752 #ifdef CONFIG_SERIAL_8250_RSA
753 /*
754 * Reset the RSA board back to 115kbps compat mode.
755 */
756 disable_rsa(up);
757 #endif
758
759 /*
760 * Read data port to reset things.
761 */
762 (void) serial_in(up, UART_RX);
763
764 free_irq(up->port.irq, up);
765 }
766
767 static void
768 sunsu_change_speed(struct uart_port *port, unsigned int cflag,
769 unsigned int iflag, unsigned int quot)
770 {
771 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
772 unsigned char cval, fcr = 0;
773 unsigned long flags;
774
775 switch (cflag & CSIZE) {
776 case CS5:
777 cval = 0x00;
778 break;
779 case CS6:
780 cval = 0x01;
781 break;
782 case CS7:
783 cval = 0x02;
784 break;
785 default:
786 case CS8:
787 cval = 0x03;
788 break;
789 }
790
791 if (cflag & CSTOPB)
792 cval |= 0x04;
793 if (cflag & PARENB)
794 cval |= UART_LCR_PARITY;
795 if (!(cflag & PARODD))
796 cval |= UART_LCR_EPAR;
797 #ifdef CMSPAR
798 if (cflag & CMSPAR)
799 cval |= UART_LCR_SPAR;
800 #endif
801
802 /*
803 * Work around a bug in the Oxford Semiconductor 952 rev B
804 * chip which causes it to seriously miscalculate baud rates
805 * when DLL is 0.
806 */
807 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
808 up->rev == 0x5201)
809 quot ++;
810
811 if (uart_config[up->port.type].flags & UART_USE_FIFO) {
812 if ((up->port.uartclk / quot) < (2400 * 16))
813 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
814 #ifdef CONFIG_SERIAL_8250_RSA
815 else if (up->port.type == PORT_RSA)
816 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
817 #endif
818 else
819 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
820 }
821 if (up->port.type == PORT_16750)
822 fcr |= UART_FCR7_64BYTE;
823
824 /*
825 * Ok, we're now changing the port state. Do it with
826 * interrupts disabled.
827 */
828 spin_lock_irqsave(&up->port.lock, flags);
829
830 /*
831 * Update the per-port timeout.
832 */
833 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
834
835 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
836 if (iflag & INPCK)
837 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
838 if (iflag & (BRKINT | PARMRK))
839 up->port.read_status_mask |= UART_LSR_BI;
840
841 /*
842 * Characteres to ignore
843 */
844 up->port.ignore_status_mask = 0;
845 if (iflag & IGNPAR)
846 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
847 if (iflag & IGNBRK) {
848 up->port.ignore_status_mask |= UART_LSR_BI;
849 /*
850 * If we're ignoring parity and break indicators,
851 * ignore overruns too (for real raw support).
852 */
853 if (iflag & IGNPAR)
854 up->port.ignore_status_mask |= UART_LSR_OE;
855 }
856
857 /*
858 * ignore all characters if CREAD is not set
859 */
860 if ((cflag & CREAD) == 0)
861 up->port.ignore_status_mask |= UART_LSR_DR;
862
863 /*
864 * CTS flow control flag and modem status interrupts
865 */
866 up->ier &= ~UART_IER_MSI;
867 if (UART_ENABLE_MS(&up->port, cflag))
868 up->ier |= UART_IER_MSI;
869
870 serial_out(up, UART_IER, up->ier);
871
872 if (uart_config[up->port.type].flags & UART_STARTECH) {
873 serial_outp(up, UART_LCR, 0xBF);
874 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
875 }
876 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
877 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
878 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
879 if (up->port.type == PORT_16750)
880 serial_outp(up, UART_FCR, fcr); /* set fcr */
881 serial_outp(up, UART_LCR, cval); /* reset DLAB */
882 up->lcr = cval; /* Save LCR */
883 if (up->port.type != PORT_16750) {
884 if (fcr & UART_FCR_ENABLE_FIFO) {
885 /* emulated UARTs (Lucent Venus 167x) need two steps */
886 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
887 }
888 serial_outp(up, UART_FCR, fcr); /* set fcr */
889 }
890
891 up->cflag = cflag;
892
893 spin_unlock_irqrestore(&up->port.lock, flags);
894 }
895
896 static void
897 sunsu_set_termios(struct uart_port *port, struct termios *termios,
898 struct termios *old)
899 {
900 unsigned int baud, quot;
901
902 /*
903 * Ask the core to calculate the divisor for us.
904 */
905 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
906 quot = uart_get_divisor(port, baud);
907
908 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
909 }
910
911 static void sunsu_release_port(struct uart_port *port)
912 {
913 }
914
915 static int sunsu_request_port(struct uart_port *port)
916 {
917 return 0;
918 }
919
920 static void sunsu_config_port(struct uart_port *port, int flags)
921 {
922 struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
923
924 if (flags & UART_CONFIG_TYPE) {
925 /*
926 * We are supposed to call autoconfig here, but this requires
927 * splitting all the OBP probing crap from the UART probing.
928 * We'll do it when we kill sunsu.c altogether.
929 */
930 port->type = up->type_probed; /* XXX */
931 }
932 }
933
934 static int
935 sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
936 {
937 return -EINVAL;
938 }
939
940 static const char *
941 sunsu_type(struct uart_port *port)
942 {
943 int type = port->type;
944
945 if (type >= ARRAY_SIZE(uart_config))
946 type = 0;
947 return uart_config[type].name;
948 }
949
950 static struct uart_ops sunsu_pops = {
951 .tx_empty = sunsu_tx_empty,
952 .set_mctrl = sunsu_set_mctrl,
953 .get_mctrl = sunsu_get_mctrl,
954 .stop_tx = sunsu_stop_tx,
955 .start_tx = sunsu_start_tx,
956 .stop_rx = sunsu_stop_rx,
957 .enable_ms = sunsu_enable_ms,
958 .break_ctl = sunsu_break_ctl,
959 .startup = sunsu_startup,
960 .shutdown = sunsu_shutdown,
961 .set_termios = sunsu_set_termios,
962 .type = sunsu_type,
963 .release_port = sunsu_release_port,
964 .request_port = sunsu_request_port,
965 .config_port = sunsu_config_port,
966 .verify_port = sunsu_verify_port,
967 };
968
969 #define UART_NR 4
970
971 static struct uart_sunsu_port sunsu_ports[UART_NR];
972
973 #ifdef CONFIG_SERIO
974
975 static DEFINE_SPINLOCK(sunsu_serio_lock);
976
977 static int sunsu_serio_write(struct serio *serio, unsigned char ch)
978 {
979 struct uart_sunsu_port *up = serio->port_data;
980 unsigned long flags;
981 int lsr;
982
983 spin_lock_irqsave(&sunsu_serio_lock, flags);
984
985 do {
986 lsr = serial_in(up, UART_LSR);
987 } while (!(lsr & UART_LSR_THRE));
988
989 /* Send the character out. */
990 serial_out(up, UART_TX, ch);
991
992 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
993
994 return 0;
995 }
996
997 static int sunsu_serio_open(struct serio *serio)
998 {
999 struct uart_sunsu_port *up = serio->port_data;
1000 unsigned long flags;
1001 int ret;
1002
1003 spin_lock_irqsave(&sunsu_serio_lock, flags);
1004 if (!up->serio_open) {
1005 up->serio_open = 1;
1006 ret = 0;
1007 } else
1008 ret = -EBUSY;
1009 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1010
1011 return ret;
1012 }
1013
1014 static void sunsu_serio_close(struct serio *serio)
1015 {
1016 struct uart_sunsu_port *up = serio->port_data;
1017 unsigned long flags;
1018
1019 spin_lock_irqsave(&sunsu_serio_lock, flags);
1020 up->serio_open = 0;
1021 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1022 }
1023
1024 #endif /* CONFIG_SERIO */
1025
1026 static void sunsu_autoconfig(struct uart_sunsu_port *up)
1027 {
1028 unsigned char status1, status2, scratch, scratch2, scratch3;
1029 unsigned char save_lcr, save_mcr;
1030 unsigned long flags;
1031
1032 if (up->su_type == SU_PORT_NONE)
1033 return;
1034
1035 up->type_probed = PORT_UNKNOWN;
1036 up->port.iotype = UPIO_MEM;
1037
1038 spin_lock_irqsave(&up->port.lock, flags);
1039
1040 if (!(up->port.flags & UPF_BUGGY_UART)) {
1041 /*
1042 * Do a simple existence test first; if we fail this, there's
1043 * no point trying anything else.
1044 *
1045 * 0x80 is used as a nonsense port to prevent against false
1046 * positives due to ISA bus float. The assumption is that
1047 * 0x80 is a non-existent port; which should be safe since
1048 * include/asm/io.h also makes this assumption.
1049 */
1050 scratch = serial_inp(up, UART_IER);
1051 serial_outp(up, UART_IER, 0);
1052 #ifdef __i386__
1053 outb(0xff, 0x080);
1054 #endif
1055 scratch2 = serial_inp(up, UART_IER);
1056 serial_outp(up, UART_IER, 0x0f);
1057 #ifdef __i386__
1058 outb(0, 0x080);
1059 #endif
1060 scratch3 = serial_inp(up, UART_IER);
1061 serial_outp(up, UART_IER, scratch);
1062 if (scratch2 != 0 || scratch3 != 0x0F)
1063 goto out; /* We failed; there's nothing here */
1064 }
1065
1066 save_mcr = serial_in(up, UART_MCR);
1067 save_lcr = serial_in(up, UART_LCR);
1068
1069 /*
1070 * Check to see if a UART is really there. Certain broken
1071 * internal modems based on the Rockwell chipset fail this
1072 * test, because they apparently don't implement the loopback
1073 * test mode. So this test is skipped on the COM 1 through
1074 * COM 4 ports. This *should* be safe, since no board
1075 * manufacturer would be stupid enough to design a board
1076 * that conflicts with COM 1-4 --- we hope!
1077 */
1078 if (!(up->port.flags & UPF_SKIP_TEST)) {
1079 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1080 status1 = serial_inp(up, UART_MSR) & 0xF0;
1081 serial_outp(up, UART_MCR, save_mcr);
1082 if (status1 != 0x90)
1083 goto out; /* We failed loopback test */
1084 }
1085 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1086 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1087 serial_outp(up, UART_LCR, 0);
1088 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1089 scratch = serial_in(up, UART_IIR) >> 6;
1090 switch (scratch) {
1091 case 0:
1092 up->port.type = PORT_16450;
1093 break;
1094 case 1:
1095 up->port.type = PORT_UNKNOWN;
1096 break;
1097 case 2:
1098 up->port.type = PORT_16550;
1099 break;
1100 case 3:
1101 up->port.type = PORT_16550A;
1102 break;
1103 }
1104 if (up->port.type == PORT_16550A) {
1105 /* Check for Startech UART's */
1106 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1107 if (serial_in(up, UART_EFR) == 0) {
1108 up->port.type = PORT_16650;
1109 } else {
1110 serial_outp(up, UART_LCR, 0xBF);
1111 if (serial_in(up, UART_EFR) == 0)
1112 up->port.type = PORT_16650V2;
1113 }
1114 }
1115 if (up->port.type == PORT_16550A) {
1116 /* Check for TI 16750 */
1117 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1118 serial_outp(up, UART_FCR,
1119 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1120 scratch = serial_in(up, UART_IIR) >> 5;
1121 if (scratch == 7) {
1122 /*
1123 * If this is a 16750, and not a cheap UART
1124 * clone, then it should only go into 64 byte
1125 * mode if the UART_FCR7_64BYTE bit was set
1126 * while UART_LCR_DLAB was latched.
1127 */
1128 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1129 serial_outp(up, UART_LCR, 0);
1130 serial_outp(up, UART_FCR,
1131 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1132 scratch = serial_in(up, UART_IIR) >> 5;
1133 if (scratch == 6)
1134 up->port.type = PORT_16750;
1135 }
1136 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1137 }
1138 serial_outp(up, UART_LCR, save_lcr);
1139 if (up->port.type == PORT_16450) {
1140 scratch = serial_in(up, UART_SCR);
1141 serial_outp(up, UART_SCR, 0xa5);
1142 status1 = serial_in(up, UART_SCR);
1143 serial_outp(up, UART_SCR, 0x5a);
1144 status2 = serial_in(up, UART_SCR);
1145 serial_outp(up, UART_SCR, scratch);
1146
1147 if ((status1 != 0xa5) || (status2 != 0x5a))
1148 up->port.type = PORT_8250;
1149 }
1150
1151 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
1152
1153 if (up->port.type == PORT_UNKNOWN)
1154 goto out;
1155 up->type_probed = up->port.type; /* XXX */
1156
1157 /*
1158 * Reset the UART.
1159 */
1160 #ifdef CONFIG_SERIAL_8250_RSA
1161 if (up->port.type == PORT_RSA)
1162 serial_outp(up, UART_RSA_FRR, 0);
1163 #endif
1164 serial_outp(up, UART_MCR, save_mcr);
1165 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1166 UART_FCR_CLEAR_RCVR |
1167 UART_FCR_CLEAR_XMIT));
1168 serial_outp(up, UART_FCR, 0);
1169 (void)serial_in(up, UART_RX);
1170 serial_outp(up, UART_IER, 0);
1171
1172 out:
1173 spin_unlock_irqrestore(&up->port.lock, flags);
1174 }
1175
1176 static struct uart_driver sunsu_reg = {
1177 .owner = THIS_MODULE,
1178 .driver_name = "serial",
1179 .dev_name = "ttyS",
1180 .major = TTY_MAJOR,
1181 };
1182
1183 static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up)
1184 {
1185 int quot, baud;
1186 #ifdef CONFIG_SERIO
1187 struct serio *serio;
1188 #endif
1189
1190 if (up->su_type == SU_PORT_KBD) {
1191 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1192 baud = 1200;
1193 } else {
1194 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1195 baud = 4800;
1196 }
1197 quot = up->port.uartclk / (16 * baud);
1198
1199 sunsu_autoconfig(up);
1200 if (up->port.type == PORT_UNKNOWN)
1201 return -ENODEV;
1202
1203 printk("%s: %s port at %lx, irq %u\n",
1204 to_of_device(up->port.dev)->node->full_name,
1205 (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
1206 up->port.mapbase, up->port.irq);
1207
1208 #ifdef CONFIG_SERIO
1209 serio = &up->serio;
1210 serio->port_data = up;
1211
1212 serio->id.type = SERIO_RS232;
1213 if (up->su_type == SU_PORT_KBD) {
1214 serio->id.proto = SERIO_SUNKBD;
1215 strlcpy(serio->name, "sukbd", sizeof(serio->name));
1216 } else {
1217 serio->id.proto = SERIO_SUN;
1218 serio->id.extra = 1;
1219 strlcpy(serio->name, "sums", sizeof(serio->name));
1220 }
1221 strlcpy(serio->phys,
1222 (!(up->port.line & 1) ? "su/serio0" : "su/serio1"),
1223 sizeof(serio->phys));
1224
1225 serio->write = sunsu_serio_write;
1226 serio->open = sunsu_serio_open;
1227 serio->close = sunsu_serio_close;
1228 serio->dev.parent = up->port.dev;
1229
1230 serio_register_port(serio);
1231 #endif
1232
1233 sunsu_change_speed(&up->port, up->cflag, 0, quot);
1234
1235 sunsu_startup(&up->port);
1236 return 0;
1237 }
1238
1239 /*
1240 * ------------------------------------------------------------
1241 * Serial console driver
1242 * ------------------------------------------------------------
1243 */
1244
1245 #ifdef CONFIG_SERIAL_SUNSU_CONSOLE
1246
1247 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
1248
1249 /*
1250 * Wait for transmitter & holding register to empty
1251 */
1252 static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
1253 {
1254 unsigned int status, tmout = 10000;
1255
1256 /* Wait up to 10ms for the character(s) to be sent. */
1257 do {
1258 status = serial_in(up, UART_LSR);
1259
1260 if (status & UART_LSR_BI)
1261 up->lsr_break_flag = UART_LSR_BI;
1262
1263 if (--tmout == 0)
1264 break;
1265 udelay(1);
1266 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
1267
1268 /* Wait up to 1s for flow control if necessary */
1269 if (up->port.flags & UPF_CONS_FLOW) {
1270 tmout = 1000000;
1271 while (--tmout &&
1272 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
1273 udelay(1);
1274 }
1275 }
1276
1277 static void sunsu_console_putchar(struct uart_port *port, int ch)
1278 {
1279 struct uart_sunsu_port *up = (struct uart_sunsu_port *)port;
1280
1281 wait_for_xmitr(up);
1282 serial_out(up, UART_TX, ch);
1283 }
1284
1285 /*
1286 * Print a string to the serial port trying not to disturb
1287 * any possible real use of the port...
1288 */
1289 static void sunsu_console_write(struct console *co, const char *s,
1290 unsigned int count)
1291 {
1292 struct uart_sunsu_port *up = &sunsu_ports[co->index];
1293 unsigned int ier;
1294
1295 /*
1296 * First save the UER then disable the interrupts
1297 */
1298 ier = serial_in(up, UART_IER);
1299 serial_out(up, UART_IER, 0);
1300
1301 uart_console_write(&up->port, s, count, sunsu_console_putchar);
1302
1303 /*
1304 * Finally, wait for transmitter to become empty
1305 * and restore the IER
1306 */
1307 wait_for_xmitr(up);
1308 serial_out(up, UART_IER, ier);
1309 }
1310
1311 /*
1312 * Setup initial baud/bits/parity. We do two things here:
1313 * - construct a cflag setting for the first su_open()
1314 * - initialize the serial port
1315 * Return non-zero if we didn't find a serial port.
1316 */
1317 static int sunsu_console_setup(struct console *co, char *options)
1318 {
1319 struct uart_port *port;
1320 int baud = 9600;
1321 int bits = 8;
1322 int parity = 'n';
1323 int flow = 'n';
1324
1325 printk("Console: ttyS%d (SU)\n",
1326 (sunsu_reg.minor - 64) + co->index);
1327
1328 /*
1329 * Check whether an invalid uart number has been specified, and
1330 * if so, search for the first available port that does have
1331 * console support.
1332 */
1333 if (co->index >= UART_NR)
1334 co->index = 0;
1335 port = &sunsu_ports[co->index].port;
1336
1337 /*
1338 * Temporary fix.
1339 */
1340 spin_lock_init(&port->lock);
1341
1342 if (options)
1343 uart_parse_options(options, &baud, &parity, &bits, &flow);
1344
1345 return uart_set_options(port, co, baud, parity, bits, flow);
1346 }
1347
1348 static struct console sunsu_cons = {
1349 .name = "ttyS",
1350 .write = sunsu_console_write,
1351 .device = uart_console_device,
1352 .setup = sunsu_console_setup,
1353 .flags = CON_PRINTBUFFER,
1354 .index = -1,
1355 .data = &sunsu_reg,
1356 };
1357
1358 /*
1359 * Register console.
1360 */
1361
1362 static inline struct console *SUNSU_CONSOLE(int num_uart)
1363 {
1364 int i;
1365
1366 if (con_is_present())
1367 return NULL;
1368
1369 for (i = 0; i < num_uart; i++) {
1370 int this_minor = sunsu_reg.minor + i;
1371
1372 if ((this_minor - 64) == (serial_console - 1))
1373 break;
1374 }
1375 if (i == num_uart)
1376 return NULL;
1377
1378 sunsu_cons.index = i;
1379
1380 return &sunsu_cons;
1381 }
1382 #else
1383 #define SUNSU_CONSOLE(num_uart) (NULL)
1384 #define sunsu_serial_console_init() do { } while (0)
1385 #endif
1386
1387 static enum su_type __devinit su_get_type(struct device_node *dp)
1388 {
1389 struct device_node *ap = of_find_node_by_path("/aliases");
1390
1391 if (ap) {
1392 char *keyb = of_get_property(ap, "keyboard", NULL);
1393 char *ms = of_get_property(ap, "mouse", NULL);
1394
1395 if (keyb) {
1396 if (dp == of_find_node_by_path(keyb))
1397 return SU_PORT_KBD;
1398 }
1399 if (ms) {
1400 if (dp == of_find_node_by_path(ms))
1401 return SU_PORT_MS;
1402 }
1403 }
1404
1405 return SU_PORT_PORT;
1406 }
1407
1408 static int __devinit su_probe(struct of_device *op, const struct of_device_id *match)
1409 {
1410 static int inst;
1411 struct device_node *dp = op->node;
1412 struct uart_sunsu_port *up;
1413 struct resource *rp;
1414 enum su_type type;
1415 int err;
1416
1417 type = su_get_type(dp);
1418 if (type == SU_PORT_PORT) {
1419 if (inst >= UART_NR)
1420 return -EINVAL;
1421 up = &sunsu_ports[inst];
1422 } else {
1423 up = kzalloc(sizeof(*up), GFP_KERNEL);
1424 if (!up)
1425 return -ENOMEM;
1426 }
1427
1428 up->port.line = inst;
1429
1430 spin_lock_init(&up->port.lock);
1431
1432 up->su_type = type;
1433
1434 rp = &op->resource[0];
1435 up->port.mapbase = rp->start;
1436 up->reg_size = (rp->end - rp->start) + 1;
1437 up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
1438 if (!up->port.membase) {
1439 if (type != SU_PORT_PORT)
1440 kfree(up);
1441 return -ENOMEM;
1442 }
1443
1444 up->port.irq = op->irqs[0];
1445
1446 up->port.dev = &op->dev;
1447
1448 up->port.type = PORT_UNKNOWN;
1449 up->port.uartclk = (SU_BASE_BAUD * 16);
1450
1451 err = 0;
1452 if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
1453 err = sunsu_kbd_ms_init(up);
1454 if (err) {
1455 kfree(up);
1456 goto out_unmap;
1457 }
1458 dev_set_drvdata(&op->dev, up);
1459
1460 return 0;
1461 }
1462
1463 up->port.flags |= UPF_BOOT_AUTOCONF;
1464
1465 sunsu_autoconfig(up);
1466
1467 err = -ENODEV;
1468 if (up->port.type == PORT_UNKNOWN)
1469 goto out_unmap;
1470
1471 up->port.ops = &sunsu_pops;
1472
1473 err = uart_add_one_port(&sunsu_reg, &up->port);
1474 if (err)
1475 goto out_unmap;
1476
1477 dev_set_drvdata(&op->dev, up);
1478
1479 inst++;
1480
1481 return 0;
1482
1483 out_unmap:
1484 of_iounmap(up->port.membase, up->reg_size);
1485 return err;
1486 }
1487
1488 static int __devexit su_remove(struct of_device *dev)
1489 {
1490 struct uart_sunsu_port *up = dev_get_drvdata(&dev->dev);;
1491
1492 if (up->su_type == SU_PORT_MS ||
1493 up->su_type == SU_PORT_KBD) {
1494 #ifdef CONFIG_SERIO
1495 serio_unregister_port(&up->serio);
1496 #endif
1497 kfree(up);
1498 } else if (up->port.type != PORT_UNKNOWN) {
1499 uart_remove_one_port(&sunsu_reg, &up->port);
1500 }
1501
1502 if (up->port.membase)
1503 of_iounmap(up->port.membase, up->reg_size);
1504
1505 dev_set_drvdata(&dev->dev, NULL);
1506
1507 return 0;
1508 }
1509
1510 static struct of_device_id su_match[] = {
1511 {
1512 .name = "su",
1513 },
1514 {
1515 .name = "su_pnp",
1516 },
1517 {
1518 .name = "serial",
1519 .compatible = "su",
1520 },
1521 {},
1522 };
1523 MODULE_DEVICE_TABLE(of, su_match);
1524
1525 static struct of_platform_driver su_driver = {
1526 .name = "su",
1527 .match_table = su_match,
1528 .probe = su_probe,
1529 .remove = __devexit_p(su_remove),
1530 };
1531
1532 static int num_uart;
1533
1534 static int __init sunsu_init(void)
1535 {
1536 struct device_node *dp;
1537 int err;
1538
1539 num_uart = 0;
1540 for_each_node_by_name(dp, "su") {
1541 if (su_get_type(dp) == SU_PORT_PORT)
1542 num_uart++;
1543 }
1544 for_each_node_by_name(dp, "su_pnp") {
1545 if (su_get_type(dp) == SU_PORT_PORT)
1546 num_uart++;
1547 }
1548 for_each_node_by_name(dp, "serial") {
1549 if (of_device_is_compatible(dp, "su")) {
1550 if (su_get_type(dp) == SU_PORT_PORT)
1551 num_uart++;
1552 }
1553 }
1554
1555 if (num_uart) {
1556 sunsu_reg.minor = sunserial_current_minor;
1557 sunsu_reg.nr = num_uart;
1558 err = uart_register_driver(&sunsu_reg);
1559 if (err)
1560 return err;
1561 sunsu_reg.tty_driver->name_base = sunsu_reg.minor - 64;
1562 sunserial_current_minor += num_uart;
1563 sunsu_reg.cons = SUNSU_CONSOLE(num_uart);
1564 }
1565
1566 err = of_register_driver(&su_driver, &of_bus_type);
1567 if (err && num_uart)
1568 uart_unregister_driver(&sunsu_reg);
1569
1570 return err;
1571 }
1572
1573 static void __exit sunsu_exit(void)
1574 {
1575 if (num_uart)
1576 uart_unregister_driver(&sunsu_reg);
1577 }
1578
1579 module_init(sunsu_init);
1580 module_exit(sunsu_exit);
1581
1582 MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller");
1583 MODULE_DESCRIPTION("Sun SU serial port driver");
1584 MODULE_VERSION("2.0");
1585 MODULE_LICENSE("GPL");
Ubuntu Hirsute Linux kernel mirror