drivers/spi/spi-mxs.c

   1 /*
   2  * Freescale MXS SPI master driver
   3  *
   4  * Copyright 2012 DENX Software Engineering, GmbH.
   5  * Copyright 2012 Freescale Semiconductor, Inc.
   6  * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
   7  *
   8  * Rework and transition to new API by:
   9  * Marek Vasut <marex@denx.de>
  10  *
  11  * Based on previous attempt by:
  12  * Fabio Estevam <fabio.estevam@freescale.com>
  13  *
  14  * Based on code from U-Boot bootloader by:
  15  * Marek Vasut <marex@denx.de>
  16  *
  17  * Based on spi-stmp.c, which is:
  18  * Author: Dmitry Pervushin <dimka@embeddedalley.com>
  19  *
  20  * This program is free software; you can redistribute it and/or modify
  21  * it under the terms of the GNU General Public License as published by
  22  * the Free Software Foundation; either version 2 of the License, or
  23  * (at your option) any later version.
  24  *
  25  * This program is distributed in the hope that it will be useful,
  26  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  27  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  28  * GNU General Public License for more details.
  29  */
  30
  31 #include <linux/kernel.h>
  32 #include <linux/init.h>
  33 #include <linux/ioport.h>
  34 #include <linux/of.h>
  35 #include <linux/of_device.h>
  36 #include <linux/of_gpio.h>
  37 #include <linux/platform_device.h>
  38 #include <linux/delay.h>
  39 #include <linux/interrupt.h>
  40 #include <linux/dma-mapping.h>
  41 #include <linux/dmaengine.h>
  42 #include <linux/highmem.h>
  43 #include <linux/clk.h>
  44 #include <linux/err.h>
  45 #include <linux/completion.h>
  46 #include <linux/gpio.h>
  47 #include <linux/regulator/consumer.h>
  48 #include <linux/module.h>
  49 #include <linux/pinctrl/consumer.h>
  50 #include <linux/stmp_device.h>
  51 #include <linux/spi/spi.h>
  52 #include <linux/spi/mxs-spi.h>
  53
  54 #define DRIVER_NAME             "mxs-spi"
  55
  56 /* Use 10S timeout for very long transfers, it should suffice. */
  57 #define SSP_TIMEOUT             10000
  58
  59 #define SG_MAXLEN               0xff00
  60
  61 struct mxs_spi {
  62         struct mxs_ssp          ssp;
  63         struct completion       c;
  64 };
  65
  66 static int mxs_spi_setup_transfer(struct spi_device *dev,
  67                                 struct spi_transfer *t)
  68 {
  69         struct mxs_spi *spi = spi_master_get_devdata(dev->master);
  70         struct mxs_ssp *ssp = &spi->ssp;
  71         uint8_t bits_per_word;
  72         uint32_t hz = 0;
  73
  74         bits_per_word = dev->bits_per_word;
  75         if (t && t->bits_per_word)
  76                 bits_per_word = t->bits_per_word;
  77
  78         if (bits_per_word != 8) {
  79                 dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
  80                                         __func__, bits_per_word);
  81                 return -EINVAL;
  82         }
  83
  84         hz = dev->max_speed_hz;
  85         if (t && t->speed_hz)
  86                 hz = min(hz, t->speed_hz);
  87         if (hz == 0) {
  88                 dev_err(&dev->dev, "Cannot continue with zero clock\n");
  89                 return -EINVAL;
  90         }
  91
  92         mxs_ssp_set_clk_rate(ssp, hz);
  93
  94         writel(BF_SSP_CTRL1_SSP_MODE(BV_SSP_CTRL1_SSP_MODE__SPI) |
  95                      BF_SSP_CTRL1_WORD_LENGTH
  96                      (BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS) |
  97                      ((dev->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) |
  98                      ((dev->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0),
  99                      ssp->base + HW_SSP_CTRL1(ssp));
 100
 101         writel(0x0, ssp->base + HW_SSP_CMD0);
 102         writel(0x0, ssp->base + HW_SSP_CMD1);
 103
 104         return 0;
 105 }
 106
 107 static int mxs_spi_setup(struct spi_device *dev)
 108 {
 109         int err = 0;
 110
 111         if (!dev->bits_per_word)
 112                 dev->bits_per_word = 8;
 113
 114         if (dev->mode & ~(SPI_CPOL | SPI_CPHA))
 115                 return -EINVAL;
 116
 117         err = mxs_spi_setup_transfer(dev, NULL);
 118         if (err) {
 119                 dev_err(&dev->dev,
 120                         "Failed to setup transfer, error = %d\n", err);
 121         }
 122
 123         return err;
 124 }
 125
 126 static uint32_t mxs_spi_cs_to_reg(unsigned cs)
 127 {
 128         uint32_t select = 0;
 129
 130         /*
 131          * i.MX28 Datasheet: 17.10.1: HW_SSP_CTRL0
 132          *
 133          * The bits BM_SSP_CTRL0_WAIT_FOR_CMD and BM_SSP_CTRL0_WAIT_FOR_IRQ
 134          * in HW_SSP_CTRL0 register do have multiple usage, please refer to
 135          * the datasheet for further details. In SPI mode, they are used to
 136          * toggle the chip-select lines (nCS pins).
 137          */
 138         if (cs & 1)
 139                 select |= BM_SSP_CTRL0_WAIT_FOR_CMD;
 140         if (cs & 2)
 141                 select |= BM_SSP_CTRL0_WAIT_FOR_IRQ;
 142
 143         return select;
 144 }
 145
 146 static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
 147 {
 148         const uint32_t mask =
 149                 BM_SSP_CTRL0_WAIT_FOR_CMD | BM_SSP_CTRL0_WAIT_FOR_IRQ;
 150         uint32_t select;
 151         struct mxs_ssp *ssp = &spi->ssp;
 152
 153         writel(mask, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
 154         select = mxs_spi_cs_to_reg(cs);
 155         writel(select, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 156 }
 157
 158 static inline void mxs_spi_enable(struct mxs_spi *spi)
 159 {
 160         struct mxs_ssp *ssp = &spi->ssp;
 161
 162         writel(BM_SSP_CTRL0_LOCK_CS,
 163                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 164         writel(BM_SSP_CTRL0_IGNORE_CRC,
 165                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
 166 }
 167
 168 static inline void mxs_spi_disable(struct mxs_spi *spi)
 169 {
 170         struct mxs_ssp *ssp = &spi->ssp;
 171
 172         writel(BM_SSP_CTRL0_LOCK_CS,
 173                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
 174         writel(BM_SSP_CTRL0_IGNORE_CRC,
 175                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 176 }
 177
 178 static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
 179 {
 180         const unsigned long timeout = jiffies + msecs_to_jiffies(SSP_TIMEOUT);
 181         struct mxs_ssp *ssp = &spi->ssp;
 182         uint32_t reg;
 183
 184         do {
 185                 reg = readl_relaxed(ssp->base + offset);
 186
 187                 if (!set)
 188                         reg = ~reg;
 189
 190                 reg &= mask;
 191
 192                 if (reg == mask)
 193                         return 0;
 194         } while (time_before(jiffies, timeout));
 195
 196         return -ETIMEDOUT;
 197 }
 198
 199 static void mxs_ssp_dma_irq_callback(void *param)
 200 {
 201         struct mxs_spi *spi = param;
 202         complete(&spi->c);
 203 }
 204
 205 static irqreturn_t mxs_ssp_irq_handler(int irq, void *dev_id)
 206 {
 207         struct mxs_ssp *ssp = dev_id;
 208         dev_err(ssp->dev, "%s[%i] CTRL1=%08x STATUS=%08x\n",
 209                 __func__, __LINE__,
 210                 readl(ssp->base + HW_SSP_CTRL1(ssp)),
 211                 readl(ssp->base + HW_SSP_STATUS(ssp)));
 212         return IRQ_HANDLED;
 213 }
 214
 215 static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
 216                             unsigned char *buf, int len,
 217                             int *first, int *last, int write)
 218 {
 219         struct mxs_ssp *ssp = &spi->ssp;
 220         struct dma_async_tx_descriptor *desc = NULL;
 221         const bool vmalloced_buf = is_vmalloc_addr(buf);
 222         const int desc_len = vmalloced_buf ? PAGE_SIZE : SG_MAXLEN;
 223         const int sgs = DIV_ROUND_UP(len, desc_len);
 224         int sg_count;
 225         int min, ret;
 226         uint32_t ctrl0;
 227         struct page *vm_page;
 228         void *sg_buf;
 229         struct {
 230                 uint32_t                pio[4];
 231                 struct scatterlist      sg;
 232         } *dma_xfer;
 233
 234         if (!len)
 235                 return -EINVAL;
 236
 237         dma_xfer = kzalloc(sizeof(*dma_xfer) * sgs, GFP_KERNEL);
 238         if (!dma_xfer)
 239                 return -ENOMEM;
 240
 241         INIT_COMPLETION(spi->c);
 242
 243         ctrl0 = readl(ssp->base + HW_SSP_CTRL0);
 244         ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT;
 245         ctrl0 |= BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs);
 246
 247         if (*first)
 248                 ctrl0 |= BM_SSP_CTRL0_LOCK_CS;
 249         if (!write)
 250                 ctrl0 |= BM_SSP_CTRL0_READ;
 251
 252         /* Queue the DMA data transfer. */
 253         for (sg_count = 0; sg_count < sgs; sg_count++) {
 254                 min = min(len, desc_len);
 255
 256                 /* Prepare the transfer descriptor. */
 257                 if ((sg_count + 1 == sgs) && *last)
 258                         ctrl0 |= BM_SSP_CTRL0_IGNORE_CRC;
 259
 260                 if (ssp->devid == IMX23_SSP) {
 261                         ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT;
 262                         ctrl0 |= min;
 263                 }
 264
 265                 dma_xfer[sg_count].pio[0] = ctrl0;
 266                 dma_xfer[sg_count].pio[3] = min;
 267
 268                 if (vmalloced_buf) {
 269                         vm_page = vmalloc_to_page(buf);
 270                         if (!vm_page) {
 271                                 ret = -ENOMEM;
 272                                 goto err_vmalloc;
 273                         }
 274                         sg_buf = page_address(vm_page) +
 275                                 ((size_t)buf & ~PAGE_MASK);
 276                 } else {
 277                         sg_buf = buf;
 278                 }
 279
 280                 sg_init_one(&dma_xfer[sg_count].sg, sg_buf, min);
 281                 ret = dma_map_sg(ssp->dev, &dma_xfer[sg_count].sg, 1,
 282                         write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 283
 284                 len -= min;
 285                 buf += min;
 286
 287                 /* Queue the PIO register write transfer. */
 288                 desc = dmaengine_prep_slave_sg(ssp->dmach,
 289                                 (struct scatterlist *)dma_xfer[sg_count].pio,
 290                                 (ssp->devid == IMX23_SSP) ? 1 : 4,
 291                                 DMA_TRANS_NONE,
 292                                 sg_count ? DMA_PREP_INTERRUPT : 0);
 293                 if (!desc) {
 294                         dev_err(ssp->dev,
 295                                 "Failed to get PIO reg. write descriptor.\n");
 296                         ret = -EINVAL;
 297                         goto err_mapped;
 298                 }
 299
 300                 desc = dmaengine_prep_slave_sg(ssp->dmach,
 301                                 &dma_xfer[sg_count].sg, 1,
 302                                 write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
 303                                 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 304
 305                 if (!desc) {
 306                         dev_err(ssp->dev,
 307                                 "Failed to get DMA data write descriptor.\n");
 308                         ret = -EINVAL;
 309                         goto err_mapped;
 310                 }
 311         }
 312
 313         /*
 314          * The last descriptor must have this callback,
 315          * to finish the DMA transaction.
 316          */
 317         desc->callback = mxs_ssp_dma_irq_callback;
 318         desc->callback_param = spi;
 319
 320         /* Start the transfer. */
 321         dmaengine_submit(desc);
 322         dma_async_issue_pending(ssp->dmach);
 323
 324         ret = wait_for_completion_timeout(&spi->c,
 325                                 msecs_to_jiffies(SSP_TIMEOUT));
 326         if (!ret) {
 327                 dev_err(ssp->dev, "DMA transfer timeout\n");
 328                 ret = -ETIMEDOUT;
 329                 dmaengine_terminate_all(ssp->dmach);
 330                 goto err_vmalloc;
 331         }
 332
 333         ret = 0;
 334
 335 err_vmalloc:
 336         while (--sg_count >= 0) {
 337 err_mapped:
 338                 dma_unmap_sg(ssp->dev, &dma_xfer[sg_count].sg, 1,
 339                         write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 340         }
 341
 342         kfree(dma_xfer);
 343
 344         return ret;
 345 }
 346
 347 static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
 348                             unsigned char *buf, int len,
 349                             int *first, int *last, int write)
 350 {
 351         struct mxs_ssp *ssp = &spi->ssp;
 352
 353         if (*first)
 354                 mxs_spi_enable(spi);
 355
 356         mxs_spi_set_cs(spi, cs);
 357
 358         while (len--) {
 359                 if (*last && len == 0)
 360                         mxs_spi_disable(spi);
 361
 362                 if (ssp->devid == IMX23_SSP) {
 363                         writel(BM_SSP_CTRL0_XFER_COUNT,
 364                                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
 365                         writel(1,
 366                                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 367                 } else {
 368                         writel(1, ssp->base + HW_SSP_XFER_SIZE);
 369                 }
 370
 371                 if (write)
 372                         writel(BM_SSP_CTRL0_READ,
 373                                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
 374                 else
 375                         writel(BM_SSP_CTRL0_READ,
 376                                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 377
 378                 writel(BM_SSP_CTRL0_RUN,
 379                                 ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 380
 381                 if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 1))
 382                         return -ETIMEDOUT;
 383
 384                 if (write)
 385                         writel(*buf, ssp->base + HW_SSP_DATA(ssp));
 386
 387                 writel(BM_SSP_CTRL0_DATA_XFER,
 388                              ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 389
 390                 if (!write) {
 391                         if (mxs_ssp_wait(spi, HW_SSP_STATUS(ssp),
 392                                                 BM_SSP_STATUS_FIFO_EMPTY, 0))
 393                                 return -ETIMEDOUT;
 394
 395                         *buf = (readl(ssp->base + HW_SSP_DATA(ssp)) & 0xff);
 396                 }
 397
 398                 if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 0))
 399                         return -ETIMEDOUT;
 400
 401                 buf++;
 402         }
 403
 404         if (len <= 0)
 405                 return 0;
 406
 407         return -ETIMEDOUT;
 408 }
 409
 410 static int mxs_spi_transfer_one(struct spi_master *master,
 411                                 struct spi_message *m)
 412 {
 413         struct mxs_spi *spi = spi_master_get_devdata(master);
 414         struct mxs_ssp *ssp = &spi->ssp;
 415         int first, last;
 416         struct spi_transfer *t, *tmp_t;
 417         int status = 0;
 418         int cs;
 419
 420         first = last = 0;
 421
 422         cs = m->spi->chip_select;
 423
 424         list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) {
 425
 426                 status = mxs_spi_setup_transfer(m->spi, t);
 427                 if (status)
 428                         break;
 429
 430                 if (&t->transfer_list == m->transfers.next)
 431                         first = 1;
 432                 if (&t->transfer_list == m->transfers.prev)
 433                         last = 1;
 434                 if ((t->rx_buf && t->tx_buf) || (t->rx_dma && t->tx_dma)) {
 435                         dev_err(ssp->dev,
 436                                 "Cannot send and receive simultaneously\n");
 437                         status = -EINVAL;
 438                         break;
 439                 }
 440
 441                 /*
 442                  * Small blocks can be transfered via PIO.
 443                  * Measured by empiric means:
 444                  *
 445                  * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
 446                  *
 447                  * DMA only: 2.164808 seconds, 473.0KB/s
 448                  * Combined: 1.676276 seconds, 610.9KB/s
 449                  */
 450                 if (t->len < 32) {
 451                         writel(BM_SSP_CTRL1_DMA_ENABLE,
 452                                 ssp->base + HW_SSP_CTRL1(ssp) +
 453                                 STMP_OFFSET_REG_CLR);
 454
 455                         if (t->tx_buf)
 456                                 status = mxs_spi_txrx_pio(spi, cs,
 457                                                 (void *)t->tx_buf,
 458                                                 t->len, &first, &last, 1);
 459                         if (t->rx_buf)
 460                                 status = mxs_spi_txrx_pio(spi, cs,
 461                                                 t->rx_buf, t->len,
 462                                                 &first, &last, 0);
 463                 } else {
 464                         writel(BM_SSP_CTRL1_DMA_ENABLE,
 465                                 ssp->base + HW_SSP_CTRL1(ssp) +
 466                                 STMP_OFFSET_REG_SET);
 467
 468                         if (t->tx_buf)
 469                                 status = mxs_spi_txrx_dma(spi, cs,
 470                                                 (void *)t->tx_buf, t->len,
 471                                                 &first, &last, 1);
 472                         if (t->rx_buf)
 473                                 status = mxs_spi_txrx_dma(spi, cs,
 474                                                 t->rx_buf, t->len,
 475                                                 &first, &last, 0);
 476                 }
 477
 478                 if (status) {
 479                         stmp_reset_block(ssp->base);
 480                         break;
 481                 }
 482
 483                 m->actual_length += t->len;
 484                 first = last = 0;
 485         }
 486
 487         m->status = status;
 488         spi_finalize_current_message(master);
 489
 490         return status;
 491 }
 492
 493 static const struct of_device_id mxs_spi_dt_ids[] = {
 494         { .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
 495         { .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
 496         { /* sentinel */ }
 497 };
 498 MODULE_DEVICE_TABLE(of, mxs_spi_dt_ids);
 499
 500 static int mxs_spi_probe(struct platform_device *pdev)
 501 {
 502         const struct of_device_id *of_id =
 503                         of_match_device(mxs_spi_dt_ids, &pdev->dev);
 504         struct device_node *np = pdev->dev.of_node;
 505         struct spi_master *master;
 506         struct mxs_spi *spi;
 507         struct mxs_ssp *ssp;
 508         struct resource *iores;
 509         struct pinctrl *pinctrl;
 510         struct clk *clk;
 511         void __iomem *base;
 512         int devid, clk_freq;
 513         int ret = 0, irq_err;
 514
 515         /*
 516          * Default clock speed for the SPI core. 160MHz seems to
 517          * work reasonably well with most SPI flashes, so use this
 518          * as a default. Override with "clock-frequency" DT prop.
 519          */
 520         const int clk_freq_default = 160000000;
 521
 522         iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 523         irq_err = platform_get_irq(pdev, 0);
 524         if (!iores || irq_err < 0)
 525                 return -EINVAL;
 526
 527         base = devm_ioremap_resource(&pdev->dev, iores);
 528         if (IS_ERR(base))
 529                 return PTR_ERR(base);
 530
 531         pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 532         if (IS_ERR(pinctrl))
 533                 return PTR_ERR(pinctrl);
 534
 535         clk = devm_clk_get(&pdev->dev, NULL);
 536         if (IS_ERR(clk))
 537                 return PTR_ERR(clk);
 538
 539         devid = (enum mxs_ssp_id) of_id->data;
 540         ret = of_property_read_u32(np, "clock-frequency",
 541                                    &clk_freq);
 542         if (ret)
 543                 clk_freq = clk_freq_default;
 544
 545         master = spi_alloc_master(&pdev->dev, sizeof(*spi));
 546         if (!master)
 547                 return -ENOMEM;
 548
 549         master->transfer_one_message = mxs_spi_transfer_one;
 550         master->setup = mxs_spi_setup;
 551         master->mode_bits = SPI_CPOL | SPI_CPHA;
 552         master->num_chipselect = 3;
 553         master->dev.of_node = np;
 554         master->flags = SPI_MASTER_HALF_DUPLEX;
 555
 556         spi = spi_master_get_devdata(master);
 557         ssp = &spi->ssp;
 558         ssp->dev = &pdev->dev;
 559         ssp->clk = clk;
 560         ssp->base = base;
 561         ssp->devid = devid;
 562
 563         init_completion(&spi->c);
 564
 565         ret = devm_request_irq(&pdev->dev, irq_err, mxs_ssp_irq_handler, 0,
 566                                DRIVER_NAME, ssp);
 567         if (ret)
 568                 goto out_master_free;
 569
 570         ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
 571         if (!ssp->dmach) {
 572                 dev_err(ssp->dev, "Failed to request DMA\n");
 573                 ret = -ENODEV;
 574                 goto out_master_free;
 575         }
 576
 577         clk_prepare_enable(ssp->clk);
 578         clk_set_rate(ssp->clk, clk_freq);
 579         ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
 580
 581         stmp_reset_block(ssp->base);
 582
 583         platform_set_drvdata(pdev, master);
 584
 585         ret = spi_register_master(master);
 586         if (ret) {
 587                 dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
 588                 goto out_free_dma;
 589         }
 590
 591         return 0;
 592
 593 out_free_dma:
 594         dma_release_channel(ssp->dmach);
 595         clk_disable_unprepare(ssp->clk);
 596 out_master_free:
 597         spi_master_put(master);
 598         return ret;
 599 }
 600
 601 static int mxs_spi_remove(struct platform_device *pdev)
 602 {
 603         struct spi_master *master;
 604         struct mxs_spi *spi;
 605         struct mxs_ssp *ssp;
 606
 607         master = spi_master_get(platform_get_drvdata(pdev));
 608         spi = spi_master_get_devdata(master);
 609         ssp = &spi->ssp;
 610
 611         spi_unregister_master(master);
 612
 613         dma_release_channel(ssp->dmach);
 614
 615         clk_disable_unprepare(ssp->clk);
 616
 617         spi_master_put(master);
 618
 619         return 0;
 620 }
 621
 622 static struct platform_driver mxs_spi_driver = {
 623         .probe  = mxs_spi_probe,
 624         .remove = mxs_spi_remove,
 625         .driver = {
 626                 .name   = DRIVER_NAME,
 627                 .owner  = THIS_MODULE,
 628                 .of_match_table = mxs_spi_dt_ids,
 629         },
 630 };
 631
 632 module_platform_driver(mxs_spi_driver);
 633
 634 MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
 635 MODULE_DESCRIPTION("MXS SPI master driver");
 636 MODULE_LICENSE("GPL");
 637 MODULE_ALIAS("platform:mxs-spi");