drivers/spmi/hisi-spmi-controller.c

   1 // SPDX-License-Identifier: GPL-2.0
   2
   3 #include <linux/delay.h>
   4 #include <linux/err.h>
   5 #include <linux/interrupt.h>
   6 #include <linux/io.h>
   7 #include <linux/kernel.h>
   8 #include <linux/module.h>
   9 #include <linux/of.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/seq_file.h>
  12 #include <linux/slab.h>
  13 #include <linux/spmi.h>
  14
  15 /*
  16  * SPMI register addr
  17  */
  18 #define SPMI_CHANNEL_OFFSET                             0x0300
  19 #define SPMI_SLAVE_OFFSET                               0x20
  20
  21 #define SPMI_APB_SPMI_CMD_BASE_ADDR                     0x0100
  22
  23 #define SPMI_APB_SPMI_WDATA0_BASE_ADDR                  0x0104
  24 #define SPMI_APB_SPMI_WDATA1_BASE_ADDR                  0x0108
  25 #define SPMI_APB_SPMI_WDATA2_BASE_ADDR                  0x010c
  26 #define SPMI_APB_SPMI_WDATA3_BASE_ADDR                  0x0110
  27
  28 #define SPMI_APB_SPMI_STATUS_BASE_ADDR                  0x0200
  29
  30 #define SPMI_APB_SPMI_RDATA0_BASE_ADDR                  0x0204
  31 #define SPMI_APB_SPMI_RDATA1_BASE_ADDR                  0x0208
  32 #define SPMI_APB_SPMI_RDATA2_BASE_ADDR                  0x020c
  33 #define SPMI_APB_SPMI_RDATA3_BASE_ADDR                  0x0210
  34
  35 #define SPMI_PER_DATAREG_BYTE                           4
  36 /*
  37  * SPMI cmd register
  38  */
  39 #define SPMI_APB_SPMI_CMD_EN                            BIT(31)
  40 #define SPMI_APB_SPMI_CMD_TYPE_OFFSET                   24
  41 #define SPMI_APB_SPMI_CMD_LENGTH_OFFSET                 20
  42 #define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET                16
  43 #define SPMI_APB_SPMI_CMD_ADDR_OFFSET                   0
  44
  45 /* Command Opcodes */
  46
  47 enum spmi_controller_cmd_op_code {
  48         SPMI_CMD_REG_ZERO_WRITE = 0,
  49         SPMI_CMD_REG_WRITE = 1,
  50         SPMI_CMD_REG_READ = 2,
  51         SPMI_CMD_EXT_REG_WRITE = 3,
  52         SPMI_CMD_EXT_REG_READ = 4,
  53         SPMI_CMD_EXT_REG_WRITE_L = 5,
  54         SPMI_CMD_EXT_REG_READ_L = 6,
  55         SPMI_CMD_REG_RESET = 7,
  56         SPMI_CMD_REG_SLEEP = 8,
  57         SPMI_CMD_REG_SHUTDOWN = 9,
  58         SPMI_CMD_REG_WAKEUP = 10,
  59 };
  60
  61 /*
  62  * SPMI status register
  63  */
  64 #define SPMI_APB_TRANS_DONE                     BIT(0)
  65 #define SPMI_APB_TRANS_FAIL                     BIT(2)
  66
  67 /* Command register fields */
  68 #define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT      16
  69
  70 /* Maximum number of support PMIC peripherals */
  71 #define SPMI_CONTROLLER_TIMEOUT_US              1000
  72 #define SPMI_CONTROLLER_MAX_TRANS_BYTES         16
  73
  74 struct spmi_controller_dev {
  75         struct spmi_controller  *controller;
  76         struct device           *dev;
  77         void __iomem            *base;
  78         spinlock_t              lock;
  79         u32                     channel;
  80 };
  81
  82 static int spmi_controller_wait_for_done(struct device *dev,
  83                                          struct spmi_controller_dev *ctrl_dev,
  84                                          void __iomem *base, u8 sid, u16 addr)
  85 {
  86         u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
  87         u32 status, offset;
  88
  89         offset  = SPMI_APB_SPMI_STATUS_BASE_ADDR;
  90         offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
  91
  92         do {
  93                 status = readl(base + offset);
  94
  95                 if (status & SPMI_APB_TRANS_DONE) {
  96                         if (status & SPMI_APB_TRANS_FAIL) {
  97                                 dev_err(dev, "%s: transaction failed (0x%x)\n",
  98                                         __func__, status);
  99                                 return -EIO;
 100                         }
 101                         dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
 102                         return 0;
 103                 }
 104                 udelay(1);
 105         } while (timeout--);
 106
 107         dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
 108         return -ETIMEDOUT;
 109 }
 110
 111 static int spmi_read_cmd(struct spmi_controller *ctrl,
 112                          u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc)
 113 {
 114         struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
 115         u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
 116         unsigned long flags;
 117         u8 *buf = __buf;
 118         u32 cmd, data;
 119         int rc;
 120         u8 op_code, i;
 121
 122         if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
 123                 dev_err(&ctrl->dev,
 124                         "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
 125                         SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
 126                 return  -EINVAL;
 127         }
 128
 129         switch (opc) {
 130         case SPMI_CMD_READ:
 131                 op_code = SPMI_CMD_REG_READ;
 132                 break;
 133         case SPMI_CMD_EXT_READ:
 134                 op_code = SPMI_CMD_EXT_REG_READ;
 135                 break;
 136         case SPMI_CMD_EXT_READL:
 137                 op_code = SPMI_CMD_EXT_REG_READ_L;
 138                 break;
 139         default:
 140                 dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc);
 141                 return -EINVAL;
 142         }
 143
 144         cmd = SPMI_APB_SPMI_CMD_EN |
 145              (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
 146              ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
 147              ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |  /* slvid */
 148              ((slave_addr & 0xffff)  << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */
 149
 150         spin_lock_irqsave(&spmi_controller->lock, flags);
 151
 152         writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
 153
 154         rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
 155                                            spmi_controller->base, slave_id, slave_addr);
 156         if (rc)
 157                 goto done;
 158
 159         for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
 160                 data = readl(spmi_controller->base + chnl_ofst +
 161                              SPMI_SLAVE_OFFSET * slave_id +
 162                              SPMI_APB_SPMI_RDATA0_BASE_ADDR +
 163                              i * SPMI_PER_DATAREG_BYTE);
 164                 data = be32_to_cpu((__be32 __force)data);
 165                 if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
 166                         memcpy(buf, &data, sizeof(data));
 167                         buf += sizeof(data);
 168                 } else {
 169                         memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE);
 170                         buf += (bc % SPMI_PER_DATAREG_BYTE);
 171                 }
 172         }
 173
 174 done:
 175         spin_unlock_irqrestore(&spmi_controller->lock, flags);
 176         if (rc)
 177                 dev_err(&ctrl->dev,
 178                         "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
 179                         opc, slave_id, slave_addr, bc + 1);
 180         else
 181                 dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n",
 182                         __func__, slave_id, slave_addr, (int)bc, __buf);
 183
 184         return rc;
 185 }
 186
 187 static int spmi_write_cmd(struct spmi_controller *ctrl,
 188                           u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc)
 189 {
 190         struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev);
 191         u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel;
 192         const u8 *buf = __buf;
 193         unsigned long flags;
 194         u32 cmd, data;
 195         int rc;
 196         u8 op_code, i;
 197
 198         if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
 199                 dev_err(&ctrl->dev,
 200                         "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n",
 201                         SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
 202                 return  -EINVAL;
 203         }
 204
 205         switch (opc) {
 206         case SPMI_CMD_WRITE:
 207                 op_code = SPMI_CMD_REG_WRITE;
 208                 break;
 209         case SPMI_CMD_EXT_WRITE:
 210                 op_code = SPMI_CMD_EXT_REG_WRITE;
 211                 break;
 212         case SPMI_CMD_EXT_WRITEL:
 213                 op_code = SPMI_CMD_EXT_REG_WRITE_L;
 214                 break;
 215         default:
 216                 dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc);
 217                 return -EINVAL;
 218         }
 219
 220         cmd = SPMI_APB_SPMI_CMD_EN |
 221               (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |
 222               ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |
 223               ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
 224               ((slave_addr & 0xffff)  << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
 225
 226         /* Write data to FIFOs */
 227         spin_lock_irqsave(&spmi_controller->lock, flags);
 228
 229         for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) {
 230                 data = 0;
 231                 if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) {
 232                         memcpy(&data, buf, sizeof(data));
 233                         buf += sizeof(data);
 234                 } else {
 235                         memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE);
 236                         buf += (bc % SPMI_PER_DATAREG_BYTE);
 237                 }
 238
 239                 writel((u32 __force)cpu_to_be32(data),
 240                        spmi_controller->base + chnl_ofst +
 241                        SPMI_APB_SPMI_WDATA0_BASE_ADDR +
 242                        SPMI_PER_DATAREG_BYTE * i);
 243         }
 244
 245         /* Start the transaction */
 246         writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
 247
 248         rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
 249                                            spmi_controller->base, slave_id,
 250                                            slave_addr);
 251         spin_unlock_irqrestore(&spmi_controller->lock, flags);
 252
 253         if (rc)
 254                 dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n",
 255                         opc, slave_id, slave_addr, bc);
 256         else
 257                 dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n",
 258                         __func__, slave_id, slave_addr, (int)bc, __buf);
 259
 260         return rc;
 261 }
 262
 263 static int spmi_controller_probe(struct platform_device *pdev)
 264 {
 265         struct spmi_controller_dev *spmi_controller;
 266         struct spmi_controller *ctrl;
 267         struct resource *iores;
 268         int ret;
 269
 270         ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
 271         if (!ctrl) {
 272                 dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
 273                 return -ENOMEM;
 274         }
 275         spmi_controller = spmi_controller_get_drvdata(ctrl);
 276         spmi_controller->controller = ctrl;
 277
 278         iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 279         if (!iores) {
 280                 dev_err(&pdev->dev, "can not get resource!\n");
 281                 ret = -EINVAL;
 282                 goto err_put_controller;
 283         }
 284
 285         spmi_controller->base = devm_ioremap(&pdev->dev, iores->start,
 286                                              resource_size(iores));
 287         if (!spmi_controller->base) {
 288                 dev_err(&pdev->dev, "can not remap base addr!\n");
 289                 ret = -EADDRNOTAVAIL;
 290                 goto err_put_controller;
 291         }
 292
 293         ret = of_property_read_u32(pdev->dev.of_node, "hisilicon,spmi-channel",
 294                                    &spmi_controller->channel);
 295         if (ret) {
 296                 dev_err(&pdev->dev, "can not get channel\n");
 297                 ret = -ENODEV;
 298                 goto err_put_controller;
 299         }
 300
 301         platform_set_drvdata(pdev, spmi_controller);
 302         dev_set_drvdata(&ctrl->dev, spmi_controller);
 303
 304         spin_lock_init(&spmi_controller->lock);
 305
 306         ctrl->nr = spmi_controller->channel;
 307         ctrl->dev.parent = pdev->dev.parent;
 308         ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
 309
 310         /* Callbacks */
 311         ctrl->read_cmd = spmi_read_cmd;
 312         ctrl->write_cmd = spmi_write_cmd;
 313
 314         ret = spmi_controller_add(ctrl);
 315         if (ret) {
 316                 dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret);
 317                 goto err_put_controller;
 318         }
 319
 320         return 0;
 321
 322 err_put_controller:
 323         spmi_controller_put(ctrl);
 324         return ret;
 325 }
 326
 327 static int spmi_del_controller(struct platform_device *pdev)
 328 {
 329         struct spmi_controller *ctrl = platform_get_drvdata(pdev);
 330
 331         spmi_controller_remove(ctrl);
 332         spmi_controller_put(ctrl);
 333         return 0;
 334 }
 335
 336 static const struct of_device_id spmi_controller_match_table[] = {
 337         {
 338                 .compatible = "hisilicon,kirin970-spmi-controller",
 339         },
 340         {}
 341 };
 342 MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
 343
 344 static struct platform_driver spmi_controller_driver = {
 345         .probe          = spmi_controller_probe,
 346         .remove         = spmi_del_controller,
 347         .driver         = {
 348                 .name   = "hisi_spmi_controller",
 349                 .of_match_table = spmi_controller_match_table,
 350         },
 351 };
 352
 353 static int __init spmi_controller_init(void)
 354 {
 355         return platform_driver_register(&spmi_controller_driver);
 356 }
 357 postcore_initcall(spmi_controller_init);
 358
 359 static void __exit spmi_controller_exit(void)
 360 {
 361         platform_driver_unregister(&spmi_controller_driver);
 362 }
 363 module_exit(spmi_controller_exit);
 364
 365 MODULE_LICENSE("GPL v2");
 366 MODULE_VERSION("1.0");
 367 MODULE_ALIAS("platform:spmi_controller");