Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

[mirror_ubuntu-zesty-kernel.git] / drivers / ssb / main.c

/*
 * Sonics Silicon Backplane
 * Subsystem core
 *
 * Copyright 2005, Broadcom Corporation
 * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
 *
 * Licensed under the GNU/GPL. See COPYING for details.
 */

#include "ssb_private.h"

#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/mmc/sdio_func.h>
#include <linux/slab.h>

#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>


MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
MODULE_LICENSE("GPL");


/* Temporary list of yet-to-be-attached buses */
static LIST_HEAD(attach_queue);
/* List if running buses */
static LIST_HEAD(buses);
/* Software ID counter */
static unsigned int next_busnumber;
/* buses_mutes locks the two buslists and the next_busnumber.
 * Don't lock this directly, but use ssb_buses_[un]lock() below. */
static DEFINE_MUTEX(buses_mutex);

/* There are differences in the codeflow, if the bus is
 * initialized from early boot, as various needed services
 * are not available early. This is a mechanism to delay
 * these initializations to after early boot has finished.
 * It's also used to avoid mutex locking, as that's not
 * available and needed early. */
static bool ssb_is_early_boot = 1;

static void ssb_buses_lock(void);
static void ssb_buses_unlock(void);


#ifdef CONFIG_SSB_PCIHOST
struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
{
        struct ssb_bus *bus;

        ssb_buses_lock();
        list_for_each_entry(bus, &buses, list) {
                if (bus->bustype == SSB_BUSTYPE_PCI &&
                    bus->host_pci == pdev)
                        goto found;
        }
        bus = NULL;
found:
        ssb_buses_unlock();

        return bus;
}
#endif /* CONFIG_SSB_PCIHOST */

#ifdef CONFIG_SSB_PCMCIAHOST
struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
{
        struct ssb_bus *bus;

        ssb_buses_lock();
        list_for_each_entry(bus, &buses, list) {
                if (bus->bustype == SSB_BUSTYPE_PCMCIA &&
                    bus->host_pcmcia == pdev)
                        goto found;
        }
        bus = NULL;
found:
        ssb_buses_unlock();

        return bus;
}
#endif /* CONFIG_SSB_PCMCIAHOST */

int ssb_for_each_bus_call(unsigned long data,
                          int (*func)(struct ssb_bus *bus, unsigned long data))
{
        struct ssb_bus *bus;
        int res;

        ssb_buses_lock();
        list_for_each_entry(bus, &buses, list) {
                res = func(bus, data);
                if (res >= 0) {
                        ssb_buses_unlock();
                        return res;
                }
        }
        ssb_buses_unlock();

        return -ENODEV;
}

static struct ssb_device *ssb_device_get(struct ssb_device *dev)
{
        if (dev)
                get_device(dev->dev);
        return dev;
}

static void ssb_device_put(struct ssb_device *dev)
{
        if (dev)
                put_device(dev->dev);
}

static int ssb_device_resume(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv;
        int err = 0;

        if (dev->driver) {
                ssb_drv = drv_to_ssb_drv(dev->driver);
                if (ssb_drv && ssb_drv->resume)
                        err = ssb_drv->resume(ssb_dev);
                if (err)
                        goto out;
        }
out:
        return err;
}

static int ssb_device_suspend(struct device *dev, pm_message_t state)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv;
        int err = 0;

        if (dev->driver) {
                ssb_drv = drv_to_ssb_drv(dev->driver);
                if (ssb_drv && ssb_drv->suspend)
                        err = ssb_drv->suspend(ssb_dev, state);
                if (err)
                        goto out;
        }
out:
        return err;
}

int ssb_bus_resume(struct ssb_bus *bus)
{
        int err;

        /* Reset HW state information in memory, so that HW is
         * completely reinitialized. */
        bus->mapped_device = NULL;
#ifdef CONFIG_SSB_DRIVER_PCICORE
        bus->pcicore.setup_done = 0;
#endif

        err = ssb_bus_powerup(bus, 0);
        if (err)
                return err;
        err = ssb_pcmcia_hardware_setup(bus);
        if (err) {
                ssb_bus_may_powerdown(bus);
                return err;
        }
        ssb_chipco_resume(&bus->chipco);
        ssb_bus_may_powerdown(bus);

        return 0;
}
EXPORT_SYMBOL(ssb_bus_resume);

int ssb_bus_suspend(struct ssb_bus *bus)
{
        ssb_chipco_suspend(&bus->chipco);
        ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);

        return 0;
}
EXPORT_SYMBOL(ssb_bus_suspend);

#ifdef CONFIG_SSB_SPROM
/** ssb_devices_freeze - Freeze all devices on the bus.
 *
 * After freezing no device driver will be handling a device
 * on this bus anymore. ssb_devices_thaw() must be called after
 * a successful freeze to reactivate the devices.
 *
 * @bus: The bus.
 * @ctx: Context structure. Pass this to ssb_devices_thaw().
 */
int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
{
        struct ssb_device *sdev;
        struct ssb_driver *sdrv;
        unsigned int i;

        memset(ctx, 0, sizeof(*ctx));
        ctx->bus = bus;
        SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));

        for (i = 0; i < bus->nr_devices; i++) {
                sdev = ssb_device_get(&bus->devices[i]);

                if (!sdev->dev || !sdev->dev->driver ||
                    !device_is_registered(sdev->dev)) {
                        ssb_device_put(sdev);
                        continue;
                }
                sdrv = drv_to_ssb_drv(sdev->dev->driver);
                if (SSB_WARN_ON(!sdrv->remove))
                        continue;
                sdrv->remove(sdev);
                ctx->device_frozen[i] = 1;
        }

        return 0;
}

/** ssb_devices_thaw - Unfreeze all devices on the bus.
 *
 * This will re-attach the device drivers and re-init the devices.
 *
 * @ctx: The context structure from ssb_devices_freeze()
 */
int ssb_devices_thaw(struct ssb_freeze_context *ctx)
{
        struct ssb_bus *bus = ctx->bus;
        struct ssb_device *sdev;
        struct ssb_driver *sdrv;
        unsigned int i;
        int err, result = 0;

        for (i = 0; i < bus->nr_devices; i++) {
                if (!ctx->device_frozen[i])
                        continue;
                sdev = &bus->devices[i];

                if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
                        continue;
                sdrv = drv_to_ssb_drv(sdev->dev->driver);
                if (SSB_WARN_ON(!sdrv || !sdrv->probe))
                        continue;

                err = sdrv->probe(sdev, &sdev->id);
                if (err) {
                        ssb_err("Failed to thaw device %s\n",
                                dev_name(sdev->dev));
                        result = err;
                }
                ssb_device_put(sdev);
        }

        return result;
}
#endif /* CONFIG_SSB_SPROM */

static void ssb_device_shutdown(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv;

        if (!dev->driver)
                return;
        ssb_drv = drv_to_ssb_drv(dev->driver);
        if (ssb_drv && ssb_drv->shutdown)
                ssb_drv->shutdown(ssb_dev);
}

static int ssb_device_remove(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);

        if (ssb_drv && ssb_drv->remove)
                ssb_drv->remove(ssb_dev);
        ssb_device_put(ssb_dev);

        return 0;
}

static int ssb_device_probe(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
        int err = 0;

        ssb_device_get(ssb_dev);
        if (ssb_drv && ssb_drv->probe)
                err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
        if (err)
                ssb_device_put(ssb_dev);

        return err;
}

static int ssb_match_devid(const struct ssb_device_id *tabid,
                           const struct ssb_device_id *devid)
{
        if ((tabid->vendor != devid->vendor) &&
            tabid->vendor != SSB_ANY_VENDOR)
                return 0;
        if ((tabid->coreid != devid->coreid) &&
            tabid->coreid != SSB_ANY_ID)
                return 0;
        if ((tabid->revision != devid->revision) &&
            tabid->revision != SSB_ANY_REV)
                return 0;
        return 1;
}

static int ssb_bus_match(struct device *dev, struct device_driver *drv)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
        const struct ssb_device_id *id;

        for (id = ssb_drv->id_table;
             id->vendor || id->coreid || id->revision;
             id++) {
                if (ssb_match_devid(id, &ssb_dev->id))
                        return 1; /* found */
        }

        return 0;
}

static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);

        if (!dev)
                return -ENODEV;

        return add_uevent_var(env,
                             "MODALIAS=ssb:v%04Xid%04Xrev%02X",
                             ssb_dev->id.vendor, ssb_dev->id.coreid,
                             ssb_dev->id.revision);
}

#define ssb_config_attr(attrib, field, format_string) \
static ssize_t \
attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
        return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
} \
static DEVICE_ATTR_RO(attrib);

ssb_config_attr(core_num, core_index, "%u\n")
ssb_config_attr(coreid, id.coreid, "0x%04x\n")
ssb_config_attr(vendor, id.vendor, "0x%04x\n")
ssb_config_attr(revision, id.revision, "%u\n")
ssb_config_attr(irq, irq, "%u\n")
static ssize_t
name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
        return sprintf(buf, "%s\n",
                       ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
}
static DEVICE_ATTR_RO(name);

static struct attribute *ssb_device_attrs[] = {
        &dev_attr_name.attr,
        &dev_attr_core_num.attr,
        &dev_attr_coreid.attr,
        &dev_attr_vendor.attr,
        &dev_attr_revision.attr,
        &dev_attr_irq.attr,
        NULL,
};
ATTRIBUTE_GROUPS(ssb_device);

static struct bus_type ssb_bustype = {
        .name           = "ssb",
        .match          = ssb_bus_match,
        .probe          = ssb_device_probe,
        .remove         = ssb_device_remove,
        .shutdown       = ssb_device_shutdown,
        .suspend        = ssb_device_suspend,
        .resume         = ssb_device_resume,
        .uevent         = ssb_device_uevent,
        .dev_groups     = ssb_device_groups,
};

static void ssb_buses_lock(void)
{
        /* See the comment at the ssb_is_early_boot definition */
        if (!ssb_is_early_boot)
                mutex_lock(&buses_mutex);
}

static void ssb_buses_unlock(void)
{
        /* See the comment at the ssb_is_early_boot definition */
        if (!ssb_is_early_boot)
                mutex_unlock(&buses_mutex);
}

static void ssb_devices_unregister(struct ssb_bus *bus)
{
        struct ssb_device *sdev;
        int i;

        for (i = bus->nr_devices - 1; i >= 0; i--) {
                sdev = &(bus->devices[i]);
                if (sdev->dev)
                        device_unregister(sdev->dev);
        }

#ifdef CONFIG_SSB_EMBEDDED
        if (bus->bustype == SSB_BUSTYPE_SSB)
                platform_device_unregister(bus->watchdog);
#endif
}

void ssb_bus_unregister(struct ssb_bus *bus)
{
        int err;

        err = ssb_gpio_unregister(bus);
        if (err == -EBUSY)
                ssb_dbg("Some GPIOs are still in use\n");
        else if (err)
                ssb_dbg("Can not unregister GPIO driver: %i\n", err);

        ssb_buses_lock();
        ssb_devices_unregister(bus);
        list_del(&bus->list);
        ssb_buses_unlock();

        ssb_pcmcia_exit(bus);
        ssb_pci_exit(bus);
        ssb_iounmap(bus);
}
EXPORT_SYMBOL(ssb_bus_unregister);

static void ssb_release_dev(struct device *dev)
{
        struct __ssb_dev_wrapper *devwrap;

        devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
        kfree(devwrap);
}

static int ssb_devices_register(struct ssb_bus *bus)
{
        struct ssb_device *sdev;
        struct device *dev;
        struct __ssb_dev_wrapper *devwrap;
        int i, err = 0;
        int dev_idx = 0;

        for (i = 0; i < bus->nr_devices; i++) {
                sdev = &(bus->devices[i]);

                /* We don't register SSB-system devices to the kernel,
                 * as the drivers for them are built into SSB. */
                switch (sdev->id.coreid) {
                case SSB_DEV_CHIPCOMMON:
                case SSB_DEV_PCI:
                case SSB_DEV_PCIE:
                case SSB_DEV_PCMCIA:
                case SSB_DEV_MIPS:
                case SSB_DEV_MIPS_3302:
                case SSB_DEV_EXTIF:
                        continue;
                }

                devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
                if (!devwrap) {
                        ssb_err("Could not allocate device\n");
                        err = -ENOMEM;
                        goto error;
                }
                dev = &devwrap->dev;
                devwrap->sdev = sdev;

                dev->release = ssb_release_dev;
                dev->bus = &ssb_bustype;
                dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx);

                switch (bus->bustype) {
                case SSB_BUSTYPE_PCI:
#ifdef CONFIG_SSB_PCIHOST
                        sdev->irq = bus->host_pci->irq;
                        dev->parent = &bus->host_pci->dev;
                        sdev->dma_dev = dev->parent;
#endif
                        break;
                case SSB_BUSTYPE_PCMCIA:
#ifdef CONFIG_SSB_PCMCIAHOST
                        sdev->irq = bus->host_pcmcia->irq;
                        dev->parent = &bus->host_pcmcia->dev;
#endif
                        break;
                case SSB_BUSTYPE_SDIO:
#ifdef CONFIG_SSB_SDIOHOST
                        dev->parent = &bus->host_sdio->dev;
#endif
                        break;
                case SSB_BUSTYPE_SSB:
                        dev->dma_mask = &dev->coherent_dma_mask;
                        sdev->dma_dev = dev;
                        break;
                }

                sdev->dev = dev;
                err = device_register(dev);
                if (err) {
                        ssb_err("Could not register %s\n", dev_name(dev));
                        /* Set dev to NULL to not unregister
                         * dev on error unwinding. */
                        sdev->dev = NULL;
                        kfree(devwrap);
                        goto error;
                }
                dev_idx++;
        }

#ifdef CONFIG_SSB_DRIVER_MIPS
        if (bus->mipscore.pflash.present) {
                err = platform_device_register(&ssb_pflash_dev);
                if (err)
                        pr_err("Error registering parallel flash\n");
        }
#endif

#ifdef CONFIG_SSB_SFLASH
        if (bus->mipscore.sflash.present) {
                err = platform_device_register(&ssb_sflash_dev);
                if (err)
                        pr_err("Error registering serial flash\n");
        }
#endif

        return 0;
error:
        /* Unwind the already registered devices. */
        ssb_devices_unregister(bus);
        return err;
}

/* Needs ssb_buses_lock() */
static int ssb_attach_queued_buses(void)
{
        struct ssb_bus *bus, *n;
        int err = 0;
        int drop_them_all = 0;

        list_for_each_entry_safe(bus, n, &attach_queue, list) {
                if (drop_them_all) {
                        list_del(&bus->list);
                        continue;
                }
                /* Can't init the PCIcore in ssb_bus_register(), as that
                 * is too early in boot for embedded systems
                 * (no udelay() available). So do it here in attach stage.
                 */
                err = ssb_bus_powerup(bus, 0);
                if (err)
                        goto error;
                ssb_pcicore_init(&bus->pcicore);
                if (bus->bustype == SSB_BUSTYPE_SSB)
                        ssb_watchdog_register(bus);

                err = ssb_gpio_init(bus);
                if (err == -ENOTSUPP)
                        ssb_dbg("GPIO driver not activated\n");
                else if (err)
                        ssb_dbg("Error registering GPIO driver: %i\n", err);

                ssb_bus_may_powerdown(bus);

                err = ssb_devices_register(bus);
error:
                if (err) {
                        drop_them_all = 1;
                        list_del(&bus->list);
                        continue;
                }
                list_move_tail(&bus->list, &buses);
        }

        return err;
}

static int ssb_fetch_invariants(struct ssb_bus *bus,
                                ssb_invariants_func_t get_invariants)
{
        struct ssb_init_invariants iv;
        int err;

        memset(&iv, 0, sizeof(iv));
        err = get_invariants(bus, &iv);
        if (err)
                goto out;
        memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
        memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
        bus->has_cardbus_slot = iv.has_cardbus_slot;
out:
        return err;
}

static int __maybe_unused
ssb_bus_register(struct ssb_bus *bus,
                 ssb_invariants_func_t get_invariants,
                 unsigned long baseaddr)
{
        int err;

        spin_lock_init(&bus->bar_lock);
        INIT_LIST_HEAD(&bus->list);
#ifdef CONFIG_SSB_EMBEDDED
        spin_lock_init(&bus->gpio_lock);
#endif

        /* Powerup the bus */
        err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
        if (err)
                goto out;

        /* Init SDIO-host device (if any), before the scan */
        err = ssb_sdio_init(bus);
        if (err)
                goto err_disable_xtal;

        ssb_buses_lock();
        bus->busnumber = next_busnumber;
        /* Scan for devices (cores) */
        err = ssb_bus_scan(bus, baseaddr);
        if (err)
                goto err_sdio_exit;

        /* Init PCI-host device (if any) */
        err = ssb_pci_init(bus);
        if (err)
                goto err_unmap;
        /* Init PCMCIA-host device (if any) */
        err = ssb_pcmcia_init(bus);
        if (err)
                goto err_pci_exit;

        /* Initialize basic system devices (if available) */
        err = ssb_bus_powerup(bus, 0);
        if (err)
                goto err_pcmcia_exit;
        ssb_chipcommon_init(&bus->chipco);
        ssb_extif_init(&bus->extif);
        ssb_mipscore_init(&bus->mipscore);
        err = ssb_fetch_invariants(bus, get_invariants);
        if (err) {
                ssb_bus_may_powerdown(bus);
                goto err_pcmcia_exit;
        }
        ssb_bus_may_powerdown(bus);

        /* Queue it for attach.
         * See the comment at the ssb_is_early_boot definition. */
        list_add_tail(&bus->list, &attach_queue);
        if (!ssb_is_early_boot) {
                /* This is not early boot, so we must attach the bus now */
                err = ssb_attach_queued_buses();
                if (err)
                        goto err_dequeue;
        }
        next_busnumber++;
        ssb_buses_unlock();

out:
        return err;

err_dequeue:
        list_del(&bus->list);
err_pcmcia_exit:
        ssb_pcmcia_exit(bus);
err_pci_exit:
        ssb_pci_exit(bus);
err_unmap:
        ssb_iounmap(bus);
err_sdio_exit:
        ssb_sdio_exit(bus);
err_disable_xtal:
        ssb_buses_unlock();
        ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
        return err;
}

#ifdef CONFIG_SSB_PCIHOST
int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci)
{
        int err;

        bus->bustype = SSB_BUSTYPE_PCI;
        bus->host_pci = host_pci;
        bus->ops = &ssb_pci_ops;

        err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
        if (!err) {
                ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
                         dev_name(&host_pci->dev));
        } else {
                ssb_err("Failed to register PCI version of SSB with error %d\n",
                        err);
        }

        return err;
}
#endif /* CONFIG_SSB_PCIHOST */

#ifdef CONFIG_SSB_PCMCIAHOST
int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
                               struct pcmcia_device *pcmcia_dev,
                               unsigned long baseaddr)
{
        int err;

        bus->bustype = SSB_BUSTYPE_PCMCIA;
        bus->host_pcmcia = pcmcia_dev;
        bus->ops = &ssb_pcmcia_ops;

        err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
        if (!err) {
                ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
                         pcmcia_dev->devname);
        }

        return err;
}
#endif /* CONFIG_SSB_PCMCIAHOST */

#ifdef CONFIG_SSB_SDIOHOST
int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
                             unsigned int quirks)
{
        int err;

        bus->bustype = SSB_BUSTYPE_SDIO;
        bus->host_sdio = func;
        bus->ops = &ssb_sdio_ops;
        bus->quirks = quirks;

        err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
        if (!err) {
                ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
                         sdio_func_id(func));
        }

        return err;
}
EXPORT_SYMBOL(ssb_bus_sdiobus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */

#ifdef CONFIG_SSB_HOST_SOC
int ssb_bus_host_soc_register(struct ssb_bus *bus, unsigned long baseaddr)
{
        int err;

        bus->bustype = SSB_BUSTYPE_SSB;
        bus->ops = &ssb_host_soc_ops;

        err = ssb_bus_register(bus, ssb_host_soc_get_invariants, baseaddr);
        if (!err) {
                ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
                         baseaddr);
        }

        return err;
}
#endif

int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
{
        drv->drv.name = drv->name;
        drv->drv.bus = &ssb_bustype;
        drv->drv.owner = owner;

        return driver_register(&drv->drv);
}
EXPORT_SYMBOL(__ssb_driver_register);

void ssb_driver_unregister(struct ssb_driver *drv)
{
        driver_unregister(&drv->drv);
}
EXPORT_SYMBOL(ssb_driver_unregister);

void ssb_set_devtypedata(struct ssb_device *dev, void *data)
{
        struct ssb_bus *bus = dev->bus;
        struct ssb_device *ent;
        int i;

        for (i = 0; i < bus->nr_devices; i++) {
                ent = &(bus->devices[i]);
                if (ent->id.vendor != dev->id.vendor)
                        continue;
                if (ent->id.coreid != dev->id.coreid)
                        continue;

                ent->devtypedata = data;
        }
}
EXPORT_SYMBOL(ssb_set_devtypedata);

static u32 clkfactor_f6_resolve(u32 v)
{
        /* map the magic values */
        switch (v) {
        case SSB_CHIPCO_CLK_F6_2:
                return 2;
        case SSB_CHIPCO_CLK_F6_3:
                return 3;
        case SSB_CHIPCO_CLK_F6_4:
                return 4;
        case SSB_CHIPCO_CLK_F6_5:
                return 5;
        case SSB_CHIPCO_CLK_F6_6:
                return 6;
        case SSB_CHIPCO_CLK_F6_7:
                return 7;
        }
        return 0;
}

/* Calculate the speed the backplane would run at a given set of clockcontrol values */
u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
{
        u32 n1, n2, clock, m1, m2, m3, mc;

        n1 = (n & SSB_CHIPCO_CLK_N1);
        n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);

        switch (plltype) {
        case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
                if (m & SSB_CHIPCO_CLK_T6_MMASK)
                        return SSB_CHIPCO_CLK_T6_M1;
                return SSB_CHIPCO_CLK_T6_M0;
        case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
        case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
        case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
        case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
                n1 = clkfactor_f6_resolve(n1);
                n2 += SSB_CHIPCO_CLK_F5_BIAS;
                break;
        case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
                n1 += SSB_CHIPCO_CLK_T2_BIAS;
                n2 += SSB_CHIPCO_CLK_T2_BIAS;
                SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
                SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
                break;
        case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
                return 100000000;
        default:
                SSB_WARN_ON(1);
        }

        switch (plltype) {
        case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
        case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
                clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
                break;
        default:
                clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
        }
        if (!clock)
                return 0;

        m1 = (m & SSB_CHIPCO_CLK_M1);
        m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
        m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
        mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);

        switch (plltype) {
        case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
        case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
        case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
        case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
                m1 = clkfactor_f6_resolve(m1);
                if ((plltype == SSB_PLLTYPE_1) ||
                    (plltype == SSB_PLLTYPE_3))
                        m2 += SSB_CHIPCO_CLK_F5_BIAS;
                else
                        m2 = clkfactor_f6_resolve(m2);
                m3 = clkfactor_f6_resolve(m3);

                switch (mc) {
                case SSB_CHIPCO_CLK_MC_BYPASS:
                        return clock;
                case SSB_CHIPCO_CLK_MC_M1:
                        return (clock / m1);
                case SSB_CHIPCO_CLK_MC_M1M2:
                        return (clock / (m1 * m2));
                case SSB_CHIPCO_CLK_MC_M1M2M3:
                        return (clock / (m1 * m2 * m3));
                case SSB_CHIPCO_CLK_MC_M1M3:
                        return (clock / (m1 * m3));
                }
                return 0;
        case SSB_PLLTYPE_2:
                m1 += SSB_CHIPCO_CLK_T2_BIAS;
                m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
                m3 += SSB_CHIPCO_CLK_T2_BIAS;
                SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
                SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
                SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));

                if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
                        clock /= m1;
                if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
                        clock /= m2;
                if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
                        clock /= m3;
                return clock;
        default:
                SSB_WARN_ON(1);
        }
        return 0;
}

/* Get the current speed the backplane is running at */
u32 ssb_clockspeed(struct ssb_bus *bus)
{
        u32 rate;
        u32 plltype;
        u32 clkctl_n, clkctl_m;

        if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
                return ssb_pmu_get_controlclock(&bus->chipco);

        if (ssb_extif_available(&bus->extif))
                ssb_extif_get_clockcontrol(&bus->extif, &plltype,
                                           &clkctl_n, &clkctl_m);
        else if (bus->chipco.dev)
                ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
                                            &clkctl_n, &clkctl_m);
        else
                return 0;

        if (bus->chip_id == 0x5365) {
                rate = 100000000;
        } else {
                rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
                if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
                        rate /= 2;
        }

        return rate;
}
EXPORT_SYMBOL(ssb_clockspeed);

static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
{
        u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;

        /* The REJECT bit seems to be different for Backplane rev 2.3 */
        switch (rev) {
        case SSB_IDLOW_SSBREV_22:
        case SSB_IDLOW_SSBREV_24:
        case SSB_IDLOW_SSBREV_26:
                return SSB_TMSLOW_REJECT;
        case SSB_IDLOW_SSBREV_23:
                return SSB_TMSLOW_REJECT_23;
        case SSB_IDLOW_SSBREV_25:     /* TODO - find the proper REJECT bit */
        case SSB_IDLOW_SSBREV_27:     /* same here */
                return SSB_TMSLOW_REJECT;       /* this is a guess */
        case SSB_IDLOW_SSBREV:
                break;
        default:
                WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
        }
        return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}

int ssb_device_is_enabled(struct ssb_device *dev)
{
        u32 val;
        u32 reject;

        reject = ssb_tmslow_reject_bitmask(dev);
        val = ssb_read32(dev, SSB_TMSLOW);
        val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;

        return (val == SSB_TMSLOW_CLOCK);
}
EXPORT_SYMBOL(ssb_device_is_enabled);

static void ssb_flush_tmslow(struct ssb_device *dev)
{
        /* Make _really_ sure the device has finished the TMSLOW
         * register write transaction, as we risk running into
         * a machine check exception otherwise.
         * Do this by reading the register back to commit the
         * PCI write and delay an additional usec for the device
         * to react to the change. */
        ssb_read32(dev, SSB_TMSLOW);
        udelay(1);
}

void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
{
        u32 val;

        ssb_device_disable(dev, core_specific_flags);
        ssb_write32(dev, SSB_TMSLOW,
                    SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
                    SSB_TMSLOW_FGC | core_specific_flags);
        ssb_flush_tmslow(dev);

        /* Clear SERR if set. This is a hw bug workaround. */
        if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
                ssb_write32(dev, SSB_TMSHIGH, 0);

        val = ssb_read32(dev, SSB_IMSTATE);
        if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
                val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
                ssb_write32(dev, SSB_IMSTATE, val);
        }

        ssb_write32(dev, SSB_TMSLOW,
                    SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
                    core_specific_flags);
        ssb_flush_tmslow(dev);

        ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
                    core_specific_flags);
        ssb_flush_tmslow(dev);
}
EXPORT_SYMBOL(ssb_device_enable);

/* Wait for bitmask in a register to get set or cleared.
 * timeout is in units of ten-microseconds */
static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
                         int timeout, int set)
{
        int i;
        u32 val;

        for (i = 0; i < timeout; i++) {
                val = ssb_read32(dev, reg);
                if (set) {
                        if ((val & bitmask) == bitmask)
                                return 0;
                } else {
                        if (!(val & bitmask))
                                return 0;
                }
                udelay(10);
        }
        printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
                            "register %04X to %s.\n",
               bitmask, reg, (set ? "set" : "clear"));

        return -ETIMEDOUT;
}

void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
{
        u32 reject, val;

        if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
                return;

        reject = ssb_tmslow_reject_bitmask(dev);

        if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
                ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
                ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
                ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);

                if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
                        val = ssb_read32(dev, SSB_IMSTATE);
                        val |= SSB_IMSTATE_REJECT;
                        ssb_write32(dev, SSB_IMSTATE, val);
                        ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
                                      0);
                }

                ssb_write32(dev, SSB_TMSLOW,
                        SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
                        reject | SSB_TMSLOW_RESET |
                        core_specific_flags);
                ssb_flush_tmslow(dev);

                if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
                        val = ssb_read32(dev, SSB_IMSTATE);
                        val &= ~SSB_IMSTATE_REJECT;
                        ssb_write32(dev, SSB_IMSTATE, val);
                }
        }

        ssb_write32(dev, SSB_TMSLOW,
                    reject | SSB_TMSLOW_RESET |
                    core_specific_flags);
        ssb_flush_tmslow(dev);
}
EXPORT_SYMBOL(ssb_device_disable);

/* Some chipsets need routing known for PCIe and 64-bit DMA */
static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
{
        u16 chip_id = dev->bus->chip_id;

        if (dev->id.coreid == SSB_DEV_80211) {
                return (chip_id == 0x4322 || chip_id == 43221 ||
                        chip_id == 43231 || chip_id == 43222);
        }

        return 0;
}

u32 ssb_dma_translation(struct ssb_device *dev)
{
        switch (dev->bus->bustype) {
        case SSB_BUSTYPE_SSB:
                return 0;
        case SSB_BUSTYPE_PCI:
                if (pci_is_pcie(dev->bus->host_pci) &&
                    ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
                        return SSB_PCIE_DMA_H32;
                } else {
                        if (ssb_dma_translation_special_bit(dev))
                                return SSB_PCIE_DMA_H32;
                        else
                                return SSB_PCI_DMA;
                }
        default:
                __ssb_dma_not_implemented(dev);
        }
        return 0;
}
EXPORT_SYMBOL(ssb_dma_translation);

int ssb_bus_may_powerdown(struct ssb_bus *bus)
{
        struct ssb_chipcommon *cc;
        int err = 0;

        /* On buses where more than one core may be working
         * at a time, we must not powerdown stuff if there are
         * still cores that may want to run. */
        if (bus->bustype == SSB_BUSTYPE_SSB)
                goto out;

        cc = &bus->chipco;

        if (!cc->dev)
                goto out;
        if (cc->dev->id.revision < 5)
                goto out;

        ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
        err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
        if (err)
                goto error;
out:
#ifdef CONFIG_SSB_DEBUG
        bus->powered_up = 0;
#endif
        return err;
error:
        ssb_err("Bus powerdown failed\n");
        goto out;
}
EXPORT_SYMBOL(ssb_bus_may_powerdown);

int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
{
        int err;
        enum ssb_clkmode mode;

        err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
        if (err)
                goto error;

#ifdef CONFIG_SSB_DEBUG
        bus->powered_up = 1;
#endif

        mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
        ssb_chipco_set_clockmode(&bus->chipco, mode);

        return 0;
error:
        ssb_err("Bus powerup failed\n");
        return err;
}
EXPORT_SYMBOL(ssb_bus_powerup);

static void ssb_broadcast_value(struct ssb_device *dev,
                                u32 address, u32 data)
{
#ifdef CONFIG_SSB_DRIVER_PCICORE
        /* This is used for both, PCI and ChipCommon core, so be careful. */
        BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
        BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
#endif

        ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
        ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
        ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
        ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
}

void ssb_commit_settings(struct ssb_bus *bus)
{
        struct ssb_device *dev;

#ifdef CONFIG_SSB_DRIVER_PCICORE
        dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
#else
        dev = bus->chipco.dev;
#endif
        if (WARN_ON(!dev))
                return;
        /* This forces an update of the cached registers. */
        ssb_broadcast_value(dev, 0xFD8, 0);
}
EXPORT_SYMBOL(ssb_commit_settings);

u32 ssb_admatch_base(u32 adm)
{
        u32 base = 0;

        switch (adm & SSB_ADM_TYPE) {
        case SSB_ADM_TYPE0:
                base = (adm & SSB_ADM_BASE0);
                break;
        case SSB_ADM_TYPE1:
                SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
                base = (adm & SSB_ADM_BASE1);
                break;
        case SSB_ADM_TYPE2:
                SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
                base = (adm & SSB_ADM_BASE2);
                break;
        default:
                SSB_WARN_ON(1);
        }

        return base;
}
EXPORT_SYMBOL(ssb_admatch_base);

u32 ssb_admatch_size(u32 adm)
{
        u32 size = 0;

        switch (adm & SSB_ADM_TYPE) {
        case SSB_ADM_TYPE0:
                size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
                break;
        case SSB_ADM_TYPE1:
                SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
                size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
                break;
        case SSB_ADM_TYPE2:
                SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
                size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
                break;
        default:
                SSB_WARN_ON(1);
        }
        size = (1 << (size + 1));

        return size;
}
EXPORT_SYMBOL(ssb_admatch_size);

static int __init ssb_modinit(void)
{
        int err;

        /* See the comment at the ssb_is_early_boot definition */
        ssb_is_early_boot = 0;
        err = bus_register(&ssb_bustype);
        if (err)
                return err;

        /* Maybe we already registered some buses at early boot.
         * Check for this and attach them
         */
        ssb_buses_lock();
        err = ssb_attach_queued_buses();
        ssb_buses_unlock();
        if (err) {
                bus_unregister(&ssb_bustype);
                goto out;
        }

        err = b43_pci_ssb_bridge_init();
        if (err) {
                ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
                /* don't fail SSB init because of this */
                err = 0;
        }
        err = ssb_host_pcmcia_init();
        if (err) {
                ssb_err("PCMCIA host initialization failed\n");
                /* don't fail SSB init because of this */
                err = 0;
        }
        err = ssb_gige_init();
        if (err) {
                ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
                /* don't fail SSB init because of this */
                err = 0;
        }
out:
        return err;
}
/* ssb must be initialized after PCI but before the ssb drivers.
 * That means we must use some initcall between subsys_initcall
 * and device_initcall. */
fs_initcall(ssb_modinit);

static void __exit ssb_modexit(void)
{
        ssb_gige_exit();
        ssb_host_pcmcia_exit();
        b43_pci_ssb_bridge_exit();
        bus_unregister(&ssb_bustype);
}
module_exit(ssb_modexit)