drivers/staging/comedi/Kconfig

   1 config COMEDI
   2         tristate "Data acquisition support (comedi)"
   3         depends on m
   4         ---help---
   5           Enable support a wide range of data acquisition devices
   6           for Linux.
   7
   8 if COMEDI
   9
  10 config COMEDI_DEBUG
  11         bool "Comedi debugging"
  12         ---help---
  13           This is an option for use by developers; most people should
  14           say N here. This enables comedi core and driver debugging.
  15
  16 config COMEDI_DEFAULT_BUF_SIZE_KB
  17         int "Comedi default initial asynchronous buffer size in KiB"
  18         default "2048"
  19         ---help---
  20           This is the default asynchronous buffer size which is used for
  21           commands running in the background in kernel space.  This
  22           defaults to 2048 KiB of memory so that a 16 channel card
  23           running at 10 kHz has of 2-4 seconds of buffer.
  24
  25 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
  26         int "Comedi default maximum asynchronous buffer size in KiB"
  27         default "20480"
  28         ---help---
  29           This is the default maximum asynchronous buffer size which can
  30           be requested by a userspace program without root privileges.
  31           This is set to 20480 KiB so that a fast I/O card with 16
  32           channels running at 100 kHz has 2-4 seconds of buffer.
  33
  34 menuconfig COMEDI_MISC_DRIVERS
  35         bool "Comedi misc drivers"
  36         ---help---
  37           Enable comedi misc drivers to be built
  38
  39           Note that the answer to this question won't directly affect the
  40           kernel: saying N will just cause the configurator to skip all
  41           the questions about misc non-hardware comedi drivers.
  42
  43 if COMEDI_MISC_DRIVERS
  44
  45 config COMEDI_BOND
  46         tristate "Comedi device bonding support"
  47         select COMEDI_KCOMEDILIB
  48         ---help---
  49           Enable support for a driver to 'bond' (merge) multiple subdevices
  50           from multiple devices together as one.
  51
  52           Currently, it only handles digital I/O subdevices.
  53
  54           To compile this driver as a module, choose M here: the module will be
  55           called comedi_bond.
  56
  57 config COMEDI_TEST
  58         tristate "Fake waveform generator support"
  59         ---help---
  60           Enable support for the fake waveform generator.
  61           This driver is mainly for testing purposes, but can also be used to
  62           generate sample waveforms on systems that don't have data acquisition
  63           hardware.
  64
  65           To compile this driver as a module, choose M here: the module will be
  66           called comedi_test.
  67
  68 config COMEDI_PARPORT
  69         tristate "Parallel port support"
  70         ---help---
  71           Enable support for the standard parallel port.
  72           A cheap and easy way to get a few more digital I/O lines. Steal
  73           additional parallel ports from old computers or your neighbors'
  74           computers.
  75
  76           To compile this driver as a module, choose M here: the module will be
  77           called comedi_parport.
  78
  79 config COMEDI_SERIAL2002
  80         tristate "Driver for serial connected hardware"
  81         ---help---
  82           Enable support for serial connected hardware
  83
  84           To compile this driver as a module, choose M here: the module will be
  85           called serial2002.
  86
  87 config COMEDI_SSV_DNP
  88         tristate "SSV Embedded Systems DIL/Net-PC support"
  89         depends on X86_32 || COMPILE_TEST
  90         ---help---
  91           Enable support for SSV Embedded Systems DIL/Net-PC
  92
  93           To compile this driver as a module, choose M here: the module will be
  94           called ssv_dnp.
  95
  96 endif # COMEDI_MISC_DRIVERS
  97
  98 menuconfig COMEDI_ISA_DRIVERS
  99         bool "Comedi ISA and PC/104 drivers"
 100         ---help---
 101           Enable comedi ISA and PC/104 drivers to be built
 102
 103           Note that the answer to this question won't directly affect the
 104           kernel: saying N will just cause the configurator to skip all
 105           the questions about ISA and PC/104 comedi drivers.
 106
 107 if COMEDI_ISA_DRIVERS
 108
 109 config COMEDI_PCL711
 110         tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
 111         ---help---
 112           Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
 113
 114           To compile this driver as a module, choose M here: the module will be
 115           called pcl711.
 116
 117 config COMEDI_PCL724
 118         tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
 119         select COMEDI_8255
 120         ---help---
 121           Enable support for ISA and PC/104 based 8255 digital i/o boards. This
 122           driver provides a legacy comedi driver wrapper for the generic 8255
 123           support driver.
 124
 125           Supported boards include:
 126             Advantech PCL-724            24 channels
 127             Advantech PCL-722            144 (or 96) channels
 128             Advantech PCL-731            48 channels
 129             ADlink ACL-7122              144 (or 96) channels
 130             ADlink ACL-7124              24 channels
 131             ADlink PET-48DIO             48 channels
 132             WinSystems PCM-IO48          48 channels (PC/104)
 133             Diamond Systems ONYX-MM-DIO  48 channels (PC/104)
 134
 135           To compile this driver as a module, choose M here: the module will be
 136           called pcl724.
 137
 138 config COMEDI_PCL726
 139         tristate "Advantech PCL-726 and compatible ISA card support"
 140         ---help---
 141           Enable support for Advantech PCL-726 and compatible ISA cards.
 142
 143           To compile this driver as a module, choose M here: the module will be
 144           called pcl726.
 145
 146 config COMEDI_PCL730
 147         tristate "Simple Digital I/O board support (8-bit ports)"
 148         ---help---
 149           Enable support for various simple ISA or PC/104 Digital I/O boards.
 150           These boards all use 8-bit I/O ports.
 151
 152           Advantech PCL-730             iso - 16 in/16 out  ttl - 16 in/16 out
 153           ICP ISO-730                   iso - 16 in/16 out  ttl - 16 in/16 out
 154           ADlink ACL-7130               iso - 16 in/16 out  ttl - 16 in/16 out
 155           Advantech PCM-3730            iso - 8 in/8 out    ttl - 16 in/16 out
 156           Advantech PCL-725             iso - 8 in/8 out
 157           ICP P8R8-DIO                  iso - 8 in/8 out
 158           ADlink ACL-7225b              iso - 16 in/16 out
 159           ICP P16R16-DIO                iso - 16 in/16 out
 160           Advantech PCL-733             iso - 32 in
 161           Advantech PCL-734             iso - 32 out
 162           Diamond Systems OPMM-1616-XT  iso - 16 in/16 out
 163           Diamond Systems PEARL-MM-P    iso - 16 out
 164           Diamond Systems IR104-PBF     iso - 20 in/20 out
 165
 166           To compile this driver as a module, choose M here: the module will be
 167           called pcl730.
 168
 169 config COMEDI_PCL812
 170         tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
 171         depends on VIRT_TO_BUS && ISA_DMA_API
 172         ---help---
 173           Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
 174           ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
 175           A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
 176
 177           To compile this driver as a module, choose M here: the module will be
 178           called pcl812.
 179
 180 config COMEDI_PCL816
 181         tristate "Advantech PCL-814 and PCL-816 ISA card support"
 182         depends on VIRT_TO_BUS && ISA_DMA_API
 183         ---help---
 184           Enable support for Advantech PCL-814 and PCL-816 ISA cards
 185
 186           To compile this driver as a module, choose M here: the module will be
 187           called pcl816.
 188
 189 config COMEDI_PCL818
 190         tristate "Advantech PCL-718 and PCL-818 ISA card support"
 191         depends on VIRT_TO_BUS && ISA_DMA_API
 192         ---help---
 193           Enable support for Advantech PCL-818 ISA cards
 194           PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
 195
 196           To compile this driver as a module, choose M here: the module will be
 197           called pcl818.
 198
 199 config COMEDI_PCM3724
 200         tristate "Advantech PCM-3724 PC/104 card support"
 201         select COMEDI_8255
 202         ---help---
 203           Enable support for Advantech PCM-3724 PC/104 cards.
 204
 205           To compile this driver as a module, choose M here: the module will be
 206           called pcm3724.
 207
 208 config COMEDI_AMPLC_DIO200_ISA
 209         tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
 210         select COMEDI_AMPLC_DIO200
 211         ---help---
 212           Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
 213           PC272E ISA DIO boards
 214
 215           To compile this driver as a module, choose M here: the module will be
 216           called amplc_dio200.
 217
 218 config COMEDI_AMPLC_PC236_ISA
 219         tristate "Amplicon PC36AT DIO board support"
 220         select COMEDI_AMPLC_PC236
 221         ---help---
 222           Enable support for Amplicon PC36AT ISA DIO board.
 223
 224           To compile this driver as a module, choose M here: the module will be
 225           called amplc_pc236.
 226
 227 config COMEDI_AMPLC_PC263_ISA
 228         tristate "Amplicon PC263 relay board support"
 229         ---help---
 230           Enable support for Amplicon PC263 ISA relay board.  This board has
 231           16 reed relay output channels.
 232
 233           To compile this driver as a module, choose M here: the module will be
 234           called amplc_pc263.
 235
 236 config COMEDI_RTI800
 237         tristate "Analog Devices RTI-800/815 ISA card support"
 238         ---help---
 239           Enable support for Analog Devices RTI-800/815 ISA cards
 240
 241           To compile this driver as a module, choose M here: the module will be
 242           called rti800.
 243
 244 config COMEDI_RTI802
 245         tristate "Analog Devices RTI-802 ISA card support"
 246         ---help---
 247           Enable support for Analog Devices RTI-802 ISA cards
 248
 249           To compile this driver as a module, choose M here: the module will be
 250           called rti802.
 251
 252 config COMEDI_DAC02
 253         tristate "Keithley Metrabyte DAC02 compatible ISA card support"
 254         ---help---
 255           Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
 256
 257           To compile this driver as a module, choose M here: the module will be
 258           called dac02.
 259
 260 config COMEDI_DAS16M1
 261         tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
 262         select COMEDI_8255
 263         ---help---
 264           Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
 265
 266           To compile this driver as a module, choose M here: the module will be
 267           called das16m1.
 268
 269 config COMEDI_DAS08_ISA
 270         tristate "DAS-08 compatible ISA and PC/104 card support"
 271         select COMEDI_DAS08
 272         ---help---
 273           Enable support for Keithley Metrabyte/ComputerBoards DAS08
 274           and compatible ISA and PC/104 cards:
 275           Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
 276           DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
 277           DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
 278
 279           To compile this driver as a module, choose M here: the module will be
 280           called das08_isa.
 281
 282 config COMEDI_DAS16
 283         tristate "DAS-16 compatible ISA and PC/104 card support"
 284         depends on ISA_DMA_API
 285         select COMEDI_8255
 286         ---help---
 287           Enable support for Keithley Metrabyte/ComputerBoards DAS16
 288           and compatible ISA and PC/104 cards:
 289           Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
 290           DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
 291           ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
 292           PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
 293           CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
 294           CIO-DAS1602/16, CIO-DAS16/330
 295
 296           To compile this driver as a module, choose M here: the module will be
 297           called das16.
 298
 299 config COMEDI_DAS800
 300         tristate "DAS800 and compatible ISA card support"
 301         ---help---
 302           Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
 303           Keithley Metrabyte DAS-800, DAS-801, DAS-802
 304           Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
 305           CIO-DAS802/16
 306
 307           To compile this driver as a module, choose M here: the module will be
 308           called das800.
 309
 310 config COMEDI_DAS1800
 311         tristate "DAS1800 and compatible ISA card support"
 312         depends on VIRT_TO_BUS && ISA_DMA_API
 313         ---help---
 314           Enable support for DAS1800 and compatible ISA cards
 315           Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
 316           DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
 317           DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
 318           DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
 319           DAS-1802AO
 320
 321           To compile this driver as a module, choose M here: the module will be
 322           called das1800.
 323
 324 config COMEDI_DAS6402
 325         tristate "DAS6402 and compatible ISA card support"
 326         ---help---
 327           Enable support for DAS6402 and compatible ISA cards
 328           Computerboards, Keithley Metrabyte DAS6402 and compatibles
 329
 330           To compile this driver as a module, choose M here: the module will be
 331           called das6402.
 332
 333 config COMEDI_DT2801
 334         tristate "Data Translation DT2801 ISA card support"
 335         ---help---
 336           Enable support for Data Translation DT2801 ISA cards
 337
 338           To compile this driver as a module, choose M here: the module will be
 339           called dt2801.
 340
 341 config COMEDI_DT2811
 342         tristate "Data Translation DT2811 ISA card support"
 343         ---help---
 344           Enable support for Data Translation DT2811 ISA cards
 345
 346           To compile this driver as a module, choose M here: the module will be
 347           called dt2811.
 348
 349 config COMEDI_DT2814
 350         tristate "Data Translation DT2814 ISA card support"
 351         ---help---
 352           Enable support for Data Translation DT2814 ISA cards
 353
 354           To compile this driver as a module, choose M here: the module will be
 355           called dt2814.
 356
 357 config COMEDI_DT2815
 358         tristate "Data Translation DT2815 ISA card support"
 359         ---help---
 360           Enable support for Data Translation DT2815 ISA cards
 361
 362           To compile this driver as a module, choose M here: the module will be
 363           called dt2815.
 364
 365 config COMEDI_DT2817
 366         tristate "Data Translation DT2817 ISA card support"
 367         ---help---
 368           Enable support for Data Translation DT2817 ISA cards
 369
 370           To compile this driver as a module, choose M here: the module will be
 371           called dt2817.
 372
 373 config COMEDI_DT282X
 374         tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 375         depends on VIRT_TO_BUS && ISA_DMA_API
 376         ---help---
 377           Enable support for Data Translation DT2821 series including DT-EZ
 378           DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
 379           DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
 380           DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
 381
 382           To compile this driver as a module, choose M here: the module will be
 383           called dt282x.
 384
 385 config COMEDI_DMM32AT
 386         tristate "Diamond Systems MM-32-AT PC/104 board support"
 387         ---help---
 388           Enable support for Diamond Systems MM-32-AT PC/104 boards
 389
 390           To compile this driver as a module, choose M here: the module will be
 391           called dmm32at.
 392
 393 config COMEDI_UNIOXX5
 394         tristate "Fastwel UNIOxx-5 analog and digital io board support"
 395         ---help---
 396           Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
 397
 398           To compile this driver as a module, choose M here: the module will be
 399           called unioxx5.
 400
 401 config COMEDI_FL512
 402         tristate "FL512 ISA card support"
 403         ---help---
 404           Enable support for FL512 ISA card
 405
 406           To compile this driver as a module, choose M here: the module will be
 407           called fl512.
 408
 409 config COMEDI_AIO_AIO12_8
 410         tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
 411         select COMEDI_8255
 412         ---help---
 413           Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
 414
 415           To compile this driver as a module, choose M here: the module will be
 416           called aio_aio12_8.
 417
 418 config COMEDI_AIO_IIRO_16
 419         tristate "I/O Products PC/104 IIRO16 Board support"
 420         ---help---
 421           Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
 422           Input Board
 423
 424           To compile this driver as a module, choose M here: the module will be
 425           called aio_iiro_16.
 426
 427 config COMEDI_II_PCI20KC
 428         tristate "Intelligent Instruments PCI-20001C carrier support"
 429         ---help---
 430           Enable support for Intelligent Instruments PCI-20001C carrier
 431           PCI-20001, PCI-20006 and PCI-20341
 432
 433           To compile this driver as a module, choose M here: the module will be
 434           called ii_pci20kc.
 435
 436 config COMEDI_C6XDIGIO
 437         tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
 438         ---help---
 439           Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
 440           card
 441
 442           To compile this driver as a module, choose M here: the module will be
 443           called c6xdigio.
 444
 445 config COMEDI_MPC624
 446         tristate "Micro/sys MPC-624 PC/104 board support"
 447         ---help---
 448           Enable support for Micro/sys MPC-624 PC/104 board
 449
 450           To compile this driver as a module, choose M here: the module will be
 451           called mpc624.
 452
 453 config COMEDI_ADQ12B
 454         tristate "MicroAxial ADQ12-B data acquisition and control card support"
 455         ---help---
 456           Enable MicroAxial ADQ12-B daq and control card support.
 457
 458           To compile this driver as a module, choose M here: the module will be
 459           called adq12b.
 460
 461 config COMEDI_NI_AT_A2150
 462         tristate "NI AT-A2150 ISA card support"
 463         depends on VIRT_TO_BUS && ISA_DMA_API
 464         ---help---
 465           Enable support for National Instruments AT-A2150 cards
 466
 467           To compile this driver as a module, choose M here: the module will be
 468           called ni_at_a2150.
 469
 470 config COMEDI_NI_AT_AO
 471         tristate "NI AT-AO-6/10 EISA card support"
 472         ---help---
 473           Enable support for National Instruments AT-AO-6/10 cards
 474
 475           To compile this driver as a module, choose M here: the module will be
 476           called ni_at_ao.
 477
 478 config COMEDI_NI_ATMIO
 479         tristate "NI AT-MIO E series ISA-PNP card support"
 480         select COMEDI_8255
 481         select COMEDI_NI_TIO
 482         ---help---
 483           Enable support for National Instruments AT-MIO E series cards
 484           National Instruments AT-MIO-16E-1 (ni_atmio),
 485           AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
 486           AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
 487
 488           To compile this driver as a module, choose M here: the module will be
 489           called ni_atmio.
 490
 491 config COMEDI_NI_ATMIO16D
 492         tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
 493         select COMEDI_8255
 494         ---help---
 495           Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
 496
 497           To compile this driver as a module, choose M here: the module will be
 498           called ni_atmio16d.
 499
 500 config COMEDI_NI_LABPC_ISA
 501         tristate "NI Lab-PC and compatibles ISA support"
 502         select COMEDI_NI_LABPC
 503         select COMEDI_NI_LABPC_ISADMA if ISA_DMA_API && VIRT_TO_BUS
 504         ---help---
 505           Enable support for National Instruments Lab-PC and compatibles
 506           Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
 507           Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
 508           not yet been added to the driver.
 509
 510           To compile this driver as a module, choose M here: the module will be
 511           called ni_labpc.
 512
 513 config COMEDI_PCMAD
 514         tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
 515         ---help---
 516           Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
 517
 518           To compile this driver as a module, choose M here: the module will be
 519           called pcmad.
 520
 521 config COMEDI_PCMDA12
 522         tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
 523         ---help---
 524           Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
 525           Note that the board is not ISA-PNP capable and thus needs the I/O
 526           port comedi_config parameter.
 527
 528           To compile this driver as a module, choose M here: the module will be
 529           called pcmda12.
 530
 531 config COMEDI_PCMMIO
 532         tristate "Winsystems PCM-MIO PC/104 board support"
 533         ---help---
 534           Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
 535
 536           To compile this driver as a module, choose M here: the module will be
 537           called pcmmio.
 538
 539 config COMEDI_PCMUIO
 540         tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
 541         ---help---
 542           Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
 543
 544           To compile this driver as a module, choose M here: the module will be
 545           called pcmuio.
 546
 547 config COMEDI_MULTIQ3
 548         tristate "Quanser Consulting MultiQ-3 ISA card support"
 549         ---help---
 550           Enable support for Quanser Consulting MultiQ-3 ISA cards
 551
 552           To compile this driver as a module, choose M here: the module will be
 553           called multiq3.
 554
 555 config COMEDI_S526
 556         tristate "Sensoray s526 support"
 557         ---help---
 558           Enable support for Sensoray s526
 559
 560           To compile this driver as a module, choose M here: the module will be
 561           called s526.
 562
 563 endif # COMEDI_ISA_DRIVERS
 564
 565 menuconfig COMEDI_PCI_DRIVERS
 566         bool "Comedi PCI drivers"
 567         depends on PCI
 568         ---help---
 569           Enable support for comedi PCI drivers.
 570
 571 if COMEDI_PCI_DRIVERS
 572
 573 config COMEDI_8255_PCI
 574         tristate "Generic PCI based 8255 digital i/o board support"
 575         select COMEDI_8255
 576         ---help---
 577           Enable support for PCI based 8255 digital i/o boards. This driver
 578           provides a PCI wrapper around the generic 8255 driver.
 579
 580           Supported boards:
 581             ADlink - PCI-7224, PCI-7248, and PCI-7296
 582             Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
 583                                     PCI-DIO96H
 584             National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
 585                                    PCI-6503B, PCI-6503X, and PXI-6503
 586
 587           To compile this driver as a module, choose M here: the module will
 588           be called 8255_pci.
 589
 590 config COMEDI_ADDI_WATCHDOG
 591         tristate
 592         ---help---
 593           Provides support for the watchdog subdevice found on many ADDI-DATA
 594           boards. This module will be automatically selected when needed. The
 595           module will be called addi_watchdog.
 596
 597 config COMEDI_ADDI_APCI_035
 598         tristate "ADDI-DATA APCI_035 support"
 599         ---help---
 600           Enable support for ADDI-DATA APCI_035 cards
 601
 602           To compile this driver as a module, choose M here: the module will be
 603           called addi_apci_035.
 604
 605 config COMEDI_ADDI_APCI_1032
 606         tristate "ADDI-DATA APCI_1032 support"
 607         ---help---
 608           Enable support for ADDI-DATA APCI_1032 cards
 609
 610           To compile this driver as a module, choose M here: the module will be
 611           called addi_apci_1032.
 612
 613 config COMEDI_ADDI_APCI_1500
 614         tristate "ADDI-DATA APCI_1500 support"
 615         ---help---
 616           Enable support for ADDI-DATA APCI_1500 cards
 617
 618           To compile this driver as a module, choose M here: the module will be
 619           called addi_apci_1500.
 620
 621 config COMEDI_ADDI_APCI_1516
 622         tristate "ADDI-DATA APCI-1016/1516/2016 support"
 623         select COMEDI_ADDI_WATCHDOG
 624         ---help---
 625           Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
 626           These are 16 channel, optically isolated, digital I/O boards. The 1516
 627           and 2016 boards also have a watchdog for resetting the outputs to "0".
 628
 629           To compile this driver as a module, choose M here: the module will be
 630           called addi_apci_1516.
 631
 632 config COMEDI_ADDI_APCI_1564
 633         tristate "ADDI-DATA APCI_1564 support"
 634         select COMEDI_ADDI_WATCHDOG
 635         ---help---
 636           Enable support for ADDI-DATA APCI_1564 cards
 637
 638           To compile this driver as a module, choose M here: the module will be
 639           called addi_apci_1564.
 640
 641 config COMEDI_ADDI_APCI_16XX
 642         tristate "ADDI-DATA APCI_16xx support"
 643         ---help---
 644           Enable support for ADDI-DATA APCI_16xx cards
 645
 646           To compile this driver as a module, choose M here: the module will be
 647           called addi_apci_16xx.
 648
 649 config COMEDI_ADDI_APCI_2032
 650         tristate "ADDI-DATA APCI_2032 support"
 651         select COMEDI_ADDI_WATCHDOG
 652         ---help---
 653           Enable support for ADDI-DATA APCI_2032 cards
 654
 655           To compile this driver as a module, choose M here: the module will be
 656           called addi_apci_2032.
 657
 658 config COMEDI_ADDI_APCI_2200
 659         tristate "ADDI-DATA APCI_2200 support"
 660         select COMEDI_ADDI_WATCHDOG
 661         ---help---
 662           Enable support for ADDI-DATA APCI_2200 cards
 663
 664           To compile this driver as a module, choose M here: the module will be
 665           called addi_apci_2200.
 666
 667 config COMEDI_ADDI_APCI_3120
 668         tristate "ADDI-DATA APCI_3120/3001 support"
 669         depends on HAS_DMA
 670         depends on VIRT_TO_BUS
 671         ---help---
 672           Enable support for ADDI-DATA APCI_3120/3001 cards
 673
 674           To compile this driver as a module, choose M here: the module will be
 675           called addi_apci_3120.
 676
 677 config COMEDI_ADDI_APCI_3501
 678         tristate "ADDI-DATA APCI_3501 support"
 679         ---help---
 680           Enable support for ADDI-DATA APCI_3501 cards
 681
 682           To compile this driver as a module, choose M here: the module will be
 683           called addi_apci_3501.
 684
 685 config COMEDI_ADDI_APCI_3XXX
 686         tristate "ADDI-DATA APCI_3xxx support"
 687         ---help---
 688           Enable support for ADDI-DATA APCI_3xxx cards
 689
 690           To compile this driver as a module, choose M here: the module will be
 691           called addi_apci_3xxx.
 692
 693 config COMEDI_ADL_PCI6208
 694         tristate "ADLink PCI-6208A support"
 695         ---help---
 696           Enable support for ADLink PCI-6208A cards
 697
 698           To compile this driver as a module, choose M here: the module will be
 699           called adl_pci6208.
 700
 701 config COMEDI_ADL_PCI7X3X
 702         tristate "ADLink PCI-723X/743X isolated digital i/o board support"
 703         ---help---
 704           Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
 705           Supported boards include the 32-channel PCI-7230 (16 in/16 out),
 706           PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
 707           PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
 708
 709           To compile this driver as a module, choose M here: the module will be
 710           called adl_pci7x3x.
 711
 712 config COMEDI_ADL_PCI8164
 713         tristate "ADLink PCI-8164 4 Axes Motion Control board support"
 714         ---help---
 715           Enable support for ADlink PCI-8164 4 Axes Motion Control board
 716
 717           To compile this driver as a module, choose M here: the module will be
 718           called adl_pci8164.
 719
 720 config COMEDI_ADL_PCI9111
 721         tristate "ADLink PCI-9111HR support"
 722         ---help---
 723           Enable support for ADlink PCI9111 cards
 724
 725           To compile this driver as a module, choose M here: the module will be
 726           called adl_pci9111.
 727
 728 config COMEDI_ADL_PCI9118
 729         tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 730         depends on HAS_DMA
 731         depends on VIRT_TO_BUS
 732         ---help---
 733           Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
 734
 735           To compile this driver as a module, choose M here: the module will be
 736           called adl_pci9118.
 737
 738 config COMEDI_ADV_PCI1710
 739         tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
 740         ---help---
 741           Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
 742           PCI-1713, PCI-1720 and PCI-1731
 743
 744           To compile this driver as a module, choose M here: the module will be
 745           called adv_pci1710.
 746
 747 config COMEDI_ADV_PCI1723
 748         tristate "Advantech PCI-1723 support"
 749         ---help---
 750           Enable support for Advantech PCI-1723 cards
 751
 752           To compile this driver as a module, choose M here: the module will be
 753           called adv_pci1723.
 754
 755 config COMEDI_ADV_PCI1724
 756         tristate "Advantech PCI-1724U support"
 757         ---help---
 758           Enable support for Advantech PCI-1724U cards.  These are 32-channel
 759           analog output cards with voltage and current loop output ranges and
 760           14-bit resolution.
 761
 762           To compile this driver as a module, choose M here: the module will be
 763           called adv_pci1724.
 764
 765 config COMEDI_ADV_PCI_DIO
 766         tristate "Advantech PCI DIO card support"
 767         select COMEDI_8255
 768         ---help---
 769           Enable support for Advantech PCI DIO cards
 770           PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
 771           PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
 772           PCI-1760 and PCI-1762
 773
 774           To compile this driver as a module, choose M here: the module will be
 775           called adv_pci_dio.
 776
 777 config COMEDI_AMPLC_DIO200_PCI
 778         tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
 779         select COMEDI_AMPLC_DIO200
 780         ---help---
 781           Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
 782           and PCIe296 DIO boards.
 783
 784           To compile this driver as a module, choose M here: the module will be
 785           called amplc_dio200_pci.
 786
 787 config COMEDI_AMPLC_PC236_PCI
 788         tristate "Amplicon PCI236 DIO board support"
 789         select COMEDI_AMPLC_PC236
 790         ---help---
 791           Enable support for Amplicon PCI236 DIO board.
 792
 793           To compile this driver as a module, choose M here: the module will be
 794           called amplc_pci236.
 795
 796 config COMEDI_AMPLC_PC263_PCI
 797         tristate "Amplicon PCI263 relay board support"
 798         ---help---
 799           Enable support for Amplicon PCI263 relay board.  This is a PCI board
 800           with 16 reed relay output channels.
 801
 802           To compile this driver as a module, choose M here: the module will be
 803           called amplc_pci263.
 804
 805 config COMEDI_AMPLC_PCI224
 806         tristate "Amplicon PCI224 and PCI234 support"
 807         ---help---
 808           Enable support for Amplicon PCI224 and PCI234 AO boards
 809
 810           To compile this driver as a module, choose M here: the module will be
 811           called amplc_pci224.
 812
 813 config COMEDI_AMPLC_PCI230
 814         tristate "Amplicon PCI230 and PCI260 support"
 815         select COMEDI_8255
 816         ---help---
 817           Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
 818           boards
 819
 820           To compile this driver as a module, choose M here: the module will be
 821           called amplc_pci230.
 822
 823 config COMEDI_CONTEC_PCI_DIO
 824         tristate "Contec PIO1616L digital I/O board support"
 825         ---help---
 826           Enable support for the Contec PIO1616L digital I/O board
 827
 828           To compile this driver as a module, choose M here: the module will be
 829           called contec_pci_dio.
 830
 831 config COMEDI_DAS08_PCI
 832         tristate "DAS-08 PCI support"
 833         select COMEDI_DAS08
 834         ---help---
 835           Enable support for PCI DAS-08 cards.
 836
 837           To compile this driver as a module, choose M here: the module will be
 838           called das08_pci.
 839
 840 config COMEDI_DT3000
 841         tristate "Data Translation DT3000 series support"
 842         ---help---
 843           Enable support for Data Translation DT3000 series
 844           DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
 845           DT3004-200
 846
 847           To compile this driver as a module, choose M here: the module will be
 848           called dt3000.
 849
 850 config COMEDI_DYNA_PCI10XX
 851         tristate "Dynalog PCI DAQ series support"
 852         ---help---
 853           Enable support for Dynalog PCI DAQ series
 854           PCI-1050
 855
 856           To compile this driver as a module, choose M here: the module will be
 857           called dyna_pci10xx.
 858
 859 config COMEDI_GSC_HPDI
 860         tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
 861         ---help---
 862           Enable support for General Standards Corporation high speed parallel
 863           digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
 864           Only receive mode works, transmit not supported.
 865
 866           To compile this driver as a module, choose M here: the module will be
 867           called gsc_hpdi.
 868
 869 config COMEDI_MF6X4
 870         tristate "Humusoft MF634 and MF624 DAQ Card support"
 871         ---help---
 872           This driver supports both Humusoft MF634 and MF624 Data acquisition
 873           cards. The legacy Humusoft MF614 card is not supported.
 874
 875 config COMEDI_ICP_MULTI
 876         tristate "Inova ICP_MULTI support"
 877         ---help---
 878           Enable support for Inova ICP_MULTI card
 879
 880           To compile this driver as a module, choose M here: the module will be
 881           called icp_multi.
 882
 883 config COMEDI_DAQBOARD2000
 884         tristate "IOtech DAQboard/2000 support"
 885         select COMEDI_8255
 886         ---help---
 887           Enable support for the IOtech DAQboard/2000
 888
 889           To compile this driver as a module, choose M here: the module will be
 890           called daqboard2000.
 891
 892 config COMEDI_JR3_PCI
 893         tristate "JR3/PCI force sensor board support"
 894         ---help---
 895           Enable support for JR3/PCI force sensor boards
 896
 897           To compile this driver as a module, choose M here: the module will be
 898           called jr3_pci.
 899
 900 config COMEDI_KE_COUNTER
 901         tristate "Kolter-Electronic PCI Counter 1 card support"
 902         ---help---
 903           Enable support for Kolter-Electronic PCI Counter 1 cards
 904
 905           To compile this driver as a module, choose M here: the module will be
 906           called ke_counter.
 907
 908 config COMEDI_CB_PCIDAS64
 909         tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
 910         select COMEDI_8255
 911         ---help---
 912           Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
 913           60xx, and 4020 series with the PLX 9080 PCI controller
 914
 915           To compile this driver as a module, choose M here: the module will be
 916           called cb_pcidas64.
 917
 918 config COMEDI_CB_PCIDAS
 919         tristate "MeasurementComputing PCI-DAS support"
 920         select COMEDI_8255
 921         ---help---
 922           Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
 923           AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
 924           PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
 925           and PCI_DAS1002.
 926
 927           To compile this driver as a module, choose M here: the module will be
 928           called cb_pcidas.
 929
 930 config COMEDI_CB_PCIDDA
 931         tristate "MeasurementComputing PCI-DDA series support"
 932         select COMEDI_8255
 933         ---help---
 934           Enable support for ComputerBoards/MeasurementComputing PCI-DDA
 935           series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
 936           PCI-DDA04/16 and PCI-DDA02/16
 937
 938           To compile this driver as a module, choose M here: the module will be
 939           called cb_pcidda.
 940
 941 config COMEDI_CB_PCIMDAS
 942         tristate "MeasurementComputing PCIM-DAS1602/16 support"
 943         select COMEDI_8255
 944         ---help---
 945           Enable support for ComputerBoards/MeasurementComputing PCI Migration
 946           series PCIM-DAS1602/16
 947
 948           To compile this driver as a module, choose M here: the module will be
 949           called cb_pcimdas.
 950
 951 config COMEDI_CB_PCIMDDA
 952         tristate "MeasurementComputing PCIM-DDA06-16 support"
 953         select COMEDI_8255
 954         ---help---
 955           Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
 956
 957           To compile this driver as a module, choose M here: the module will be
 958           called cb_pcimdda.
 959
 960 config COMEDI_ME4000
 961         tristate "Meilhaus ME-4000 support"
 962         ---help---
 963           Enable support for Meilhaus PCI data acquisition cards
 964           ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
 965
 966           To compile this driver as a module, choose M here: the module will be
 967           called me4000.
 968
 969 config COMEDI_ME_DAQ
 970         tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
 971         ---help---
 972           Enable support for Meilhaus PCI data acquisition cards
 973           ME-2000i, ME-2600i and ME-3000vm1
 974
 975           To compile this driver as a module, choose M here: the module will be
 976           called me_daq.
 977
 978 config COMEDI_NI_6527
 979         tristate "NI 6527 support"
 980         ---help---
 981           Enable support for the National Instruments 6527 PCI card
 982
 983           To compile this driver as a module, choose M here: the module will be
 984           called ni_6527.
 985
 986 config COMEDI_NI_65XX
 987         tristate "NI 65xx static dio PCI card support"
 988         ---help---
 989           Enable support for National Instruments 65xx static dio boards.
 990           Supported devices: National Instruments PCI-6509 (ni_65xx),
 991           PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
 992           PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
 993           PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
 994
 995           To compile this driver as a module, choose M here: the module will be
 996           called ni_65xx.
 997
 998 config COMEDI_NI_660X
 999         tristate "NI 660x counter/timer PCI card support"
1000         depends on HAS_DMA
1001         select COMEDI_NI_TIOCMD
1002         ---help---
1003           Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1004           PXI-6602, PXI-6608 and PXI-6624.
1005
1006           To compile this driver as a module, choose M here: the module will be
1007           called ni_660x.
1008
1009 config COMEDI_NI_670X
1010         tristate "NI 670x PCI card support"
1011         ---help---
1012           Enable support for National Instruments PCI-6703 and PCI-6704
1013
1014           To compile this driver as a module, choose M here: the module will be
1015           called ni_670x.
1016
1017 config COMEDI_NI_LABPC_PCI
1018         tristate "NI Lab-PC PCI-1200 support"
1019         select COMEDI_NI_LABPC
1020         ---help---
1021           Enable support for National Instruments Lab-PC PCI-1200.
1022
1023           To compile this driver as a module, choose M here: the module will be
1024           called ni_labpc_pci.
1025
1026 config COMEDI_NI_PCIDIO
1027         tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1028         depends on HAS_DMA
1029         select COMEDI_MITE
1030         select COMEDI_8255
1031         ---help---
1032           Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1033           PCI-6533 and PCI-6534
1034
1035           To compile this driver as a module, choose M here: the module will be
1036           called ni_pcidio.
1037
1038 config COMEDI_NI_PCIMIO
1039         tristate "NI PCI-MIO-E series and M series support"
1040         depends on HAS_DMA
1041         select COMEDI_NI_TIOCMD
1042         select COMEDI_8255
1043         ---help---
1044           Enable support for National Instruments PCI-MIO-E series and M series
1045           (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1046           PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1047           PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1048           PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1049           PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1050           PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1051           PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1052           PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1053           PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1054
1055           To compile this driver as a module, choose M here: the module will be
1056           called ni_pcimio.
1057
1058 config COMEDI_RTD520
1059         tristate "Real Time Devices PCI4520/DM7520 support"
1060         ---help---
1061           Enable support for Real Time Devices PCI4520/DM7520
1062
1063           To compile this driver as a module, choose M here: the module will be
1064           called rtd520.
1065
1066 config COMEDI_S626
1067         tristate "Sensoray 626 support"
1068         ---help---
1069           Enable support for Sensoray 626
1070
1071           To compile this driver as a module, choose M here: the module will be
1072           called s626.
1073
1074 config COMEDI_MITE
1075         depends on HAS_DMA
1076         tristate
1077
1078 config COMEDI_NI_TIOCMD
1079         tristate
1080         depends on HAS_DMA
1081         select COMEDI_NI_TIO
1082         select COMEDI_MITE
1083
1084 endif # COMEDI_PCI_DRIVERS
1085
1086 menuconfig COMEDI_PCMCIA_DRIVERS
1087         bool "Comedi PCMCIA drivers"
1088         depends on PCMCIA
1089         ---help---
1090           Enable support for comedi PCMCIA drivers.
1091
1092 if COMEDI_PCMCIA_DRIVERS
1093
1094 config COMEDI_CB_DAS16_CS
1095         tristate "CB DAS16 series PCMCIA support"
1096         ---help---
1097           Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1098           cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1099
1100           To compile this driver as a module, choose M here: the module will be
1101           called cb_das16_cs.
1102
1103 config COMEDI_DAS08_CS
1104         tristate "CB DAS08 PCMCIA support"
1105         select COMEDI_DAS08
1106         ---help---
1107           Enable support for the ComputerBoards/MeasurementComputing DAS-08
1108           PCMCIA card
1109
1110           To compile this driver as a module, choose M here: the module will be
1111           called das08_cs.
1112
1113 config COMEDI_NI_DAQ_700_CS
1114         tristate "NI DAQCard-700 PCMCIA support"
1115         ---help---
1116           Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1117
1118           To compile this driver as a module, choose M here: the module will be
1119           called ni_daq_700.
1120
1121 config COMEDI_NI_DAQ_DIO24_CS
1122         tristate "NI DAQ-Card DIO-24 PCMCIA support"
1123         select COMEDI_8255
1124         ---help---
1125           Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1126
1127           To compile this driver as a module, choose M here: the module will be
1128           called ni_daq_dio24.
1129
1130 config COMEDI_NI_LABPC_CS
1131         tristate "NI DAQCard-1200 PCMCIA support"
1132         select COMEDI_NI_LABPC
1133         ---help---
1134           Enable support for the National Instruments PCMCIA DAQCard-1200
1135
1136           To compile this driver as a module, choose M here: the module will be
1137           called ni_labpc_cs.
1138
1139 config COMEDI_NI_MIO_CS
1140         tristate "NI DAQCard E series PCMCIA support"
1141         select COMEDI_NI_TIO
1142         select COMEDI_8255
1143         ---help---
1144           Enable support for the National Instruments PCMCIA DAQCard E series
1145           DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1146           and DAQCard-6036E
1147
1148           To compile this driver as a module, choose M here: the module will be
1149           called ni_mio_cs.
1150
1151 config COMEDI_QUATECH_DAQP_CS
1152         tristate "Quatech DAQP PCMCIA data capture card support"
1153         ---help---
1154           Enable support for the Quatech DAQP PCMCIA data capture cards
1155           DAQP-208 and DAQP-308
1156
1157           To compile this driver as a module, choose M here: the module will be
1158           called quatech_daqp_cs.
1159
1160 endif # COMEDI_PCMCIA_DRIVERS
1161
1162 menuconfig COMEDI_USB_DRIVERS
1163         bool "Comedi USB drivers"
1164         depends on USB
1165         ---help---
1166           Enable support for comedi USB drivers.
1167
1168 if COMEDI_USB_DRIVERS
1169
1170 config COMEDI_DT9812
1171         tristate "DataTranslation DT9812 USB module support"
1172         ---help---
1173           Enable support for the Data Translation DT9812 USB module
1174
1175           To compile this driver as a module, choose M here: the module will be
1176           called dt9812.
1177
1178 config COMEDI_NI_USB6501
1179         tristate "NI USB-6501 support"
1180         ---help---
1181           Enable support for the National Instruments USB-6501 module.
1182
1183           The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1184           provides 24 digital I/O lines channels and one 32-bit counter.
1185
1186           To compile this driver as a module, choose M here: the module will be
1187           called ni_usb6501.
1188
1189 config COMEDI_USBDUX
1190         tristate "ITL USB-DUX-D support"
1191         ---help---
1192           Enable support for the Incite Technology Ltd USB-DUX-D Board
1193
1194           To compile this driver as a module, choose M here: the module will be
1195           called usbdux.
1196
1197 config COMEDI_USBDUXFAST
1198         tristate "ITL USB-DUXfast support"
1199         ---help---
1200           Enable support for the Incite Technology Ltd USB-DUXfast Board
1201
1202           To compile this driver as a module, choose M here: the module will be
1203           called usbduxfast.
1204
1205 config COMEDI_USBDUXSIGMA
1206         tristate "ITL USB-DUXsigma support"
1207         ---help---
1208           Enable support for the Incite Technology Ltd USB-DUXsigma Board
1209
1210           To compile this driver as a module, choose M here: the module will be
1211           called usbduxsigma.
1212
1213 config COMEDI_VMK80XX
1214         tristate "Velleman VM110/VM140 USB Board support"
1215         ---help---
1216           Build the Velleman USB Board Low-Level Driver supporting the
1217           K8055/K8061 aka VM110/VM140 devices
1218
1219           To compile this driver as a module, choose M here: the module will be
1220           called vmk80xx.
1221
1222 endif # COMEDI_USB_DRIVERS
1223
1224 config COMEDI_8255
1225         tristate "Generic 8255 support"
1226         ---help---
1227           Enable generic 8255 support.
1228
1229           You should enable compilation this driver if you plan to use a board
1230           that has an 8255 chip. For multifunction boards, the main driver will
1231           configure the 8255 subdevice automatically.
1232
1233           Note that most PCI based 8255 boards use the 8255_pci driver as a
1234           wrapper around this driver.
1235
1236           To compile this driver as a module, choose M here: the module will be
1237           called 8255.
1238
1239 config COMEDI_KCOMEDILIB
1240         tristate "Comedi kcomedilib"
1241         ---help---
1242           Build the kcomedilib.
1243
1244           This is a kernel module used to open and manipulate Comedi devices
1245           from within kernel code.  It is currently only used by the
1246           comedi_bond driver, and its functionality has been stripped down to
1247           the needs of that driver, so is currently not very useful for
1248           anything else.
1249
1250           To compile kcomedilib as a module, choose M here: the module will be
1251           called kcomedilib.
1252
1253 config COMEDI_AMPLC_DIO200
1254         tristate
1255
1256 config COMEDI_AMPLC_PC236
1257         tristate
1258         select COMEDI_8255
1259
1260 config COMEDI_DAS08
1261         tristate
1262         select COMEDI_8255
1263
1264 config COMEDI_NI_LABPC
1265         tristate
1266         select COMEDI_8255
1267
1268 config COMEDI_NI_LABPC_ISADMA
1269         tristate
1270
1271 config COMEDI_NI_TIO
1272         tristate
1273
1274 endif # COMEDI