drivers/staging/comedi/Kconfig

   1 config COMEDI
   2         tristate "Data acquisition support (comedi)"
   3         depends on m
   4         ---help---
   5           Enable support a wide range of data acquisition devices
   6           for Linux.
   7
   8 if COMEDI
   9
  10 config COMEDI_DEBUG
  11         bool "Comedi debugging"
  12         ---help---
  13           This is an option for use by developers; most people should
  14           say N here. This enables comedi core and driver debugging.
  15
  16 config COMEDI_DEFAULT_BUF_SIZE_KB
  17         int "Comedi default initial asynchronous buffer size in KiB"
  18         default "2048"
  19         ---help---
  20           This is the default asynchronous buffer size which is used for
  21           commands running in the background in kernel space.  This
  22           defaults to 2048 KiB of memory so that a 16 channel card
  23           running at 10 kHz has of 2-4 seconds of buffer.
  24
  25 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
  26         int "Comedi default maximum asynchronous buffer size in KiB"
  27         default "20480"
  28         ---help---
  29           This is the default maximum asynchronous buffer size which can
  30           be requested by a userspace program without root privileges.
  31           This is set to 20480 KiB so that a fast I/O card with 16
  32           channels running at 100 kHz has 2-4 seconds of buffer.
  33
  34 menuconfig COMEDI_MISC_DRIVERS
  35         bool "Comedi misc drivers"
  36         ---help---
  37           Enable comedi misc drivers to be built
  38
  39           Note that the answer to this question won't directly affect the
  40           kernel: saying N will just cause the configurator to skip all
  41           the questions about misc non-hardware comedi drivers.
  42
  43 if COMEDI_MISC_DRIVERS
  44
  45 config COMEDI_BOND
  46         tristate "Comedi device bonding support"
  47         select COMEDI_KCOMEDILIB
  48         ---help---
  49           Enable support for a driver to 'bond' (merge) multiple subdevices
  50           from multiple devices together as one.
  51
  52           Currently, it only handles digital I/O subdevices.
  53
  54           To compile this driver as a module, choose M here: the module will be
  55           called comedi_bond.
  56
  57 config COMEDI_TEST
  58         tristate "Fake waveform generator support"
  59         ---help---
  60           Enable support for the fake waveform generator.
  61           This driver is mainly for testing purposes, but can also be used to
  62           generate sample waveforms on systems that don't have data acquisition
  63           hardware.
  64
  65           To compile this driver as a module, choose M here: the module will be
  66           called comedi_test.
  67
  68 config COMEDI_PARPORT
  69         tristate "Parallel port support"
  70         ---help---
  71           Enable support for the standard parallel port.
  72           A cheap and easy way to get a few more digital I/O lines. Steal
  73           additional parallel ports from old computers or your neighbors'
  74           computers.
  75
  76           To compile this driver as a module, choose M here: the module will be
  77           called comedi_parport.
  78
  79 config COMEDI_SERIAL2002
  80         tristate "Driver for serial connected hardware"
  81         ---help---
  82           Enable support for serial connected hardware
  83
  84           To compile this driver as a module, choose M here: the module will be
  85           called serial2002.
  86
  87 config COMEDI_SSV_DNP
  88         tristate "SSV Embedded Systems DIL/Net-PC support"
  89         depends on X86_32 || COMPILE_TEST
  90         ---help---
  91           Enable support for SSV Embedded Systems DIL/Net-PC
  92
  93           To compile this driver as a module, choose M here: the module will be
  94           called ssv_dnp.
  95
  96 endif # COMEDI_MISC_DRIVERS
  97
  98 menuconfig COMEDI_ISA_DRIVERS
  99         bool "Comedi ISA and PC/104 drivers"
 100         ---help---
 101           Enable comedi ISA and PC/104 drivers to be built
 102
 103           Note that the answer to this question won't directly affect the
 104           kernel: saying N will just cause the configurator to skip all
 105           the questions about ISA and PC/104 comedi drivers.
 106
 107 if COMEDI_ISA_DRIVERS
 108
 109 config COMEDI_PCL711
 110         tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
 111         ---help---
 112           Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
 113
 114           To compile this driver as a module, choose M here: the module will be
 115           called pcl711.
 116
 117 config COMEDI_PCL724
 118         tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
 119         select COMEDI_8255
 120         ---help---
 121           Enable support for ISA and PC/104 based 8255 digital i/o boards. This
 122           driver provides a legacy comedi driver wrapper for the generic 8255
 123           support driver.
 124
 125           Supported boards include:
 126             Advantech PCL-724            24 channels
 127             Advantech PCL-722            144 (or 96) channels
 128             Advantech PCL-731            48 channels
 129             ADlink ACL-7122              144 (or 96) channels
 130             ADlink ACL-7124              24 channels
 131             ADlink PET-48DIO             48 channels
 132             WinSystems PCM-IO48          48 channels (PC/104)
 133             Diamond Systems ONYX-MM-DIO  48 channels (PC/104)
 134
 135           To compile this driver as a module, choose M here: the module will be
 136           called pcl724.
 137
 138 config COMEDI_PCL726
 139         tristate "Advantech PCL-726 and compatible ISA card support"
 140         ---help---
 141           Enable support for Advantech PCL-726 and compatible ISA cards.
 142
 143           To compile this driver as a module, choose M here: the module will be
 144           called pcl726.
 145
 146 config COMEDI_PCL730
 147         tristate "Simple Digital I/O board support (8-bit ports)"
 148         ---help---
 149           Enable support for various simple ISA or PC/104 Digital I/O boards.
 150           These boards all use 8-bit I/O ports.
 151
 152           Advantech PCL-730             iso - 16 in/16 out  ttl - 16 in/16 out
 153           ICP ISO-730                   iso - 16 in/16 out  ttl - 16 in/16 out
 154           ADlink ACL-7130               iso - 16 in/16 out  ttl - 16 in/16 out
 155           Advantech PCM-3730            iso - 8 in/8 out    ttl - 16 in/16 out
 156           Advantech PCL-725             iso - 8 in/8 out
 157           ICP P8R8-DIO                  iso - 8 in/8 out
 158           ADlink ACL-7225b              iso - 16 in/16 out
 159           ICP P16R16-DIO                iso - 16 in/16 out
 160           Advantech PCL-733             iso - 32 in
 161           Advantech PCL-734             iso - 32 out
 162           Diamond Systems OPMM-1616-XT  iso - 16 in/16 out
 163           Diamond Systems PEARL-MM-P    iso - 16 out
 164           Diamond Systems IR104-PBF     iso - 20 in/20 out
 165
 166           To compile this driver as a module, choose M here: the module will be
 167           called pcl730.
 168
 169 config COMEDI_PCL812
 170         tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
 171         select COMEDI_ISADMA if ISA_DMA_API
 172         ---help---
 173           Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
 174           ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
 175           A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
 176
 177           To compile this driver as a module, choose M here: the module will be
 178           called pcl812.
 179
 180 config COMEDI_PCL816
 181         tristate "Advantech PCL-814 and PCL-816 ISA card support"
 182         select COMEDI_ISADMA if ISA_DMA_API
 183         ---help---
 184           Enable support for Advantech PCL-814 and PCL-816 ISA cards
 185
 186           To compile this driver as a module, choose M here: the module will be
 187           called pcl816.
 188
 189 config COMEDI_PCL818
 190         tristate "Advantech PCL-718 and PCL-818 ISA card support"
 191         select COMEDI_ISADMA if ISA_DMA_API
 192         ---help---
 193           Enable support for Advantech PCL-818 ISA cards
 194           PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
 195
 196           To compile this driver as a module, choose M here: the module will be
 197           called pcl818.
 198
 199 config COMEDI_PCM3724
 200         tristate "Advantech PCM-3724 PC/104 card support"
 201         select COMEDI_8255
 202         ---help---
 203           Enable support for Advantech PCM-3724 PC/104 cards.
 204
 205           To compile this driver as a module, choose M here: the module will be
 206           called pcm3724.
 207
 208 config COMEDI_AMPLC_DIO200_ISA
 209         tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
 210         select COMEDI_AMPLC_DIO200
 211         ---help---
 212           Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
 213           PC272E ISA DIO boards
 214
 215           To compile this driver as a module, choose M here: the module will be
 216           called amplc_dio200.
 217
 218 config COMEDI_AMPLC_PC236_ISA
 219         tristate "Amplicon PC36AT DIO board support"
 220         select COMEDI_AMPLC_PC236
 221         ---help---
 222           Enable support for Amplicon PC36AT ISA DIO board.
 223
 224           To compile this driver as a module, choose M here: the module will be
 225           called amplc_pc236.
 226
 227 config COMEDI_AMPLC_PC263_ISA
 228         tristate "Amplicon PC263 relay board support"
 229         ---help---
 230           Enable support for Amplicon PC263 ISA relay board.  This board has
 231           16 reed relay output channels.
 232
 233           To compile this driver as a module, choose M here: the module will be
 234           called amplc_pc263.
 235
 236 config COMEDI_RTI800
 237         tristate "Analog Devices RTI-800/815 ISA card support"
 238         ---help---
 239           Enable support for Analog Devices RTI-800/815 ISA cards
 240
 241           To compile this driver as a module, choose M here: the module will be
 242           called rti800.
 243
 244 config COMEDI_RTI802
 245         tristate "Analog Devices RTI-802 ISA card support"
 246         ---help---
 247           Enable support for Analog Devices RTI-802 ISA cards
 248
 249           To compile this driver as a module, choose M here: the module will be
 250           called rti802.
 251
 252 config COMEDI_DAC02
 253         tristate "Keithley Metrabyte DAC02 compatible ISA card support"
 254         ---help---
 255           Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
 256
 257           To compile this driver as a module, choose M here: the module will be
 258           called dac02.
 259
 260 config COMEDI_DAS16M1
 261         tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
 262         select COMEDI_8255
 263         ---help---
 264           Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
 265
 266           To compile this driver as a module, choose M here: the module will be
 267           called das16m1.
 268
 269 config COMEDI_DAS08_ISA
 270         tristate "DAS-08 compatible ISA and PC/104 card support"
 271         select COMEDI_DAS08
 272         ---help---
 273           Enable support for Keithley Metrabyte/ComputerBoards DAS08
 274           and compatible ISA and PC/104 cards:
 275           Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
 276           DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
 277           DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
 278
 279           To compile this driver as a module, choose M here: the module will be
 280           called das08_isa.
 281
 282 config COMEDI_DAS16
 283         tristate "DAS-16 compatible ISA and PC/104 card support"
 284         select COMEDI_ISADMA if ISA_DMA_API
 285         select COMEDI_8255
 286         ---help---
 287           Enable support for Keithley Metrabyte/ComputerBoards DAS16
 288           and compatible ISA and PC/104 cards:
 289           Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
 290           DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
 291           ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
 292           PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
 293           CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
 294           CIO-DAS1602/16, CIO-DAS16/330
 295
 296           To compile this driver as a module, choose M here: the module will be
 297           called das16.
 298
 299 config COMEDI_DAS800
 300         tristate "DAS800 and compatible ISA card support"
 301         ---help---
 302           Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
 303           Keithley Metrabyte DAS-800, DAS-801, DAS-802
 304           Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
 305           CIO-DAS802/16
 306
 307           To compile this driver as a module, choose M here: the module will be
 308           called das800.
 309
 310 config COMEDI_DAS1800
 311         tristate "DAS1800 and compatible ISA card support"
 312         select COMEDI_ISADMA if ISA_DMA_API
 313         ---help---
 314           Enable support for DAS1800 and compatible ISA cards
 315           Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
 316           DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
 317           DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
 318           DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
 319           DAS-1802AO
 320
 321           To compile this driver as a module, choose M here: the module will be
 322           called das1800.
 323
 324 config COMEDI_DAS6402
 325         tristate "DAS6402 and compatible ISA card support"
 326         ---help---
 327           Enable support for DAS6402 and compatible ISA cards
 328           Computerboards, Keithley Metrabyte DAS6402 and compatibles
 329
 330           To compile this driver as a module, choose M here: the module will be
 331           called das6402.
 332
 333 config COMEDI_DT2801
 334         tristate "Data Translation DT2801 ISA card support"
 335         ---help---
 336           Enable support for Data Translation DT2801 ISA cards
 337
 338           To compile this driver as a module, choose M here: the module will be
 339           called dt2801.
 340
 341 config COMEDI_DT2811
 342         tristate "Data Translation DT2811 ISA card support"
 343         ---help---
 344           Enable support for Data Translation DT2811 ISA cards
 345
 346           To compile this driver as a module, choose M here: the module will be
 347           called dt2811.
 348
 349 config COMEDI_DT2814
 350         tristate "Data Translation DT2814 ISA card support"
 351         ---help---
 352           Enable support for Data Translation DT2814 ISA cards
 353
 354           To compile this driver as a module, choose M here: the module will be
 355           called dt2814.
 356
 357 config COMEDI_DT2815
 358         tristate "Data Translation DT2815 ISA card support"
 359         ---help---
 360           Enable support for Data Translation DT2815 ISA cards
 361
 362           To compile this driver as a module, choose M here: the module will be
 363           called dt2815.
 364
 365 config COMEDI_DT2817
 366         tristate "Data Translation DT2817 ISA card support"
 367         ---help---
 368           Enable support for Data Translation DT2817 ISA cards
 369
 370           To compile this driver as a module, choose M here: the module will be
 371           called dt2817.
 372
 373 config COMEDI_DT282X
 374         tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 375         select COMEDI_ISADMA if ISA_DMA_API
 376         ---help---
 377           Enable support for Data Translation DT2821 series including DT-EZ
 378           DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
 379           DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
 380           DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
 381
 382           To compile this driver as a module, choose M here: the module will be
 383           called dt282x.
 384
 385 config COMEDI_DMM32AT
 386         tristate "Diamond Systems MM-32-AT PC/104 board support"
 387         select COMEDI_8255
 388         ---help---
 389           Enable support for Diamond Systems MM-32-AT PC/104 boards
 390
 391           To compile this driver as a module, choose M here: the module will be
 392           called dmm32at.
 393
 394 config COMEDI_UNIOXX5
 395         tristate "Fastwel UNIOxx-5 analog and digital io board support"
 396         ---help---
 397           Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
 398
 399           To compile this driver as a module, choose M here: the module will be
 400           called unioxx5.
 401
 402 config COMEDI_FL512
 403         tristate "FL512 ISA card support"
 404         ---help---
 405           Enable support for FL512 ISA card
 406
 407           To compile this driver as a module, choose M here: the module will be
 408           called fl512.
 409
 410 config COMEDI_AIO_AIO12_8
 411         tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
 412         select COMEDI_8255
 413         ---help---
 414           Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
 415
 416           To compile this driver as a module, choose M here: the module will be
 417           called aio_aio12_8.
 418
 419 config COMEDI_AIO_IIRO_16
 420         tristate "I/O Products PC/104 IIRO16 Board support"
 421         ---help---
 422           Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
 423           Input Board
 424
 425           To compile this driver as a module, choose M here: the module will be
 426           called aio_iiro_16.
 427
 428 config COMEDI_II_PCI20KC
 429         tristate "Intelligent Instruments PCI-20001C carrier support"
 430         depends on HAS_IOMEM
 431         ---help---
 432           Enable support for Intelligent Instruments PCI-20001C carrier
 433           PCI-20001, PCI-20006 and PCI-20341
 434
 435           To compile this driver as a module, choose M here: the module will be
 436           called ii_pci20kc.
 437
 438 config COMEDI_C6XDIGIO
 439         tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
 440         ---help---
 441           Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
 442           card
 443
 444           To compile this driver as a module, choose M here: the module will be
 445           called c6xdigio.
 446
 447 config COMEDI_MPC624
 448         tristate "Micro/sys MPC-624 PC/104 board support"
 449         ---help---
 450           Enable support for Micro/sys MPC-624 PC/104 board
 451
 452           To compile this driver as a module, choose M here: the module will be
 453           called mpc624.
 454
 455 config COMEDI_ADQ12B
 456         tristate "MicroAxial ADQ12-B data acquisition and control card support"
 457         ---help---
 458           Enable MicroAxial ADQ12-B daq and control card support.
 459
 460           To compile this driver as a module, choose M here: the module will be
 461           called adq12b.
 462
 463 config COMEDI_NI_AT_A2150
 464         tristate "NI AT-A2150 ISA card support"
 465         select COMEDI_ISADMA if ISA_DMA_API
 466         ---help---
 467           Enable support for National Instruments AT-A2150 cards
 468
 469           To compile this driver as a module, choose M here: the module will be
 470           called ni_at_a2150.
 471
 472 config COMEDI_NI_AT_AO
 473         tristate "NI AT-AO-6/10 EISA card support"
 474         ---help---
 475           Enable support for National Instruments AT-AO-6/10 cards
 476
 477           To compile this driver as a module, choose M here: the module will be
 478           called ni_at_ao.
 479
 480 config COMEDI_NI_ATMIO
 481         tristate "NI AT-MIO E series ISA-PNP card support"
 482         select COMEDI_8255
 483         select COMEDI_NI_TIO
 484         ---help---
 485           Enable support for National Instruments AT-MIO E series cards
 486           National Instruments AT-MIO-16E-1 (ni_atmio),
 487           AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
 488           AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
 489
 490           To compile this driver as a module, choose M here: the module will be
 491           called ni_atmio.
 492
 493 config COMEDI_NI_ATMIO16D
 494         tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
 495         select COMEDI_8255
 496         ---help---
 497           Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
 498
 499           To compile this driver as a module, choose M here: the module will be
 500           called ni_atmio16d.
 501
 502 config COMEDI_NI_LABPC_ISA
 503         tristate "NI Lab-PC and compatibles ISA support"
 504         select COMEDI_NI_LABPC
 505         select COMEDI_NI_LABPC_ISADMA if ISA_DMA_API
 506         ---help---
 507           Enable support for National Instruments Lab-PC and compatibles
 508           Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
 509           Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
 510           not yet been added to the driver.
 511
 512           To compile this driver as a module, choose M here: the module will be
 513           called ni_labpc.
 514
 515 config COMEDI_PCMAD
 516         tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
 517         ---help---
 518           Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
 519
 520           To compile this driver as a module, choose M here: the module will be
 521           called pcmad.
 522
 523 config COMEDI_PCMDA12
 524         tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
 525         ---help---
 526           Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
 527           Note that the board is not ISA-PNP capable and thus needs the I/O
 528           port comedi_config parameter.
 529
 530           To compile this driver as a module, choose M here: the module will be
 531           called pcmda12.
 532
 533 config COMEDI_PCMMIO
 534         tristate "Winsystems PCM-MIO PC/104 board support"
 535         ---help---
 536           Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
 537
 538           To compile this driver as a module, choose M here: the module will be
 539           called pcmmio.
 540
 541 config COMEDI_PCMUIO
 542         tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
 543         ---help---
 544           Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
 545
 546           To compile this driver as a module, choose M here: the module will be
 547           called pcmuio.
 548
 549 config COMEDI_MULTIQ3
 550         tristate "Quanser Consulting MultiQ-3 ISA card support"
 551         ---help---
 552           Enable support for Quanser Consulting MultiQ-3 ISA cards
 553
 554           To compile this driver as a module, choose M here: the module will be
 555           called multiq3.
 556
 557 config COMEDI_S526
 558         tristate "Sensoray s526 support"
 559         ---help---
 560           Enable support for Sensoray s526
 561
 562           To compile this driver as a module, choose M here: the module will be
 563           called s526.
 564
 565 endif # COMEDI_ISA_DRIVERS
 566
 567 menuconfig COMEDI_PCI_DRIVERS
 568         tristate "Comedi PCI drivers"
 569         depends on PCI
 570         ---help---
 571           Enable support for comedi PCI drivers.
 572
 573           To compile this support as a module, choose M here: the module will
 574           be called comedi_pci.
 575
 576 if COMEDI_PCI_DRIVERS
 577
 578 config COMEDI_8255_PCI
 579         tristate "Generic PCI based 8255 digital i/o board support"
 580         select COMEDI_8255
 581         ---help---
 582           Enable support for PCI based 8255 digital i/o boards. This driver
 583           provides a PCI wrapper around the generic 8255 driver.
 584
 585           Supported boards:
 586             ADlink - PCI-7224, PCI-7248, and PCI-7296
 587             Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
 588                                     PCI-DIO96H
 589             National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
 590                                    PCI-6503B, PCI-6503X, and PXI-6503
 591
 592           To compile this driver as a module, choose M here: the module will
 593           be called 8255_pci.
 594
 595 config COMEDI_ADDI_WATCHDOG
 596         tristate
 597         ---help---
 598           Provides support for the watchdog subdevice found on many ADDI-DATA
 599           boards. This module will be automatically selected when needed. The
 600           module will be called addi_watchdog.
 601
 602 config COMEDI_ADDI_APCI_1032
 603         tristate "ADDI-DATA APCI_1032 support"
 604         ---help---
 605           Enable support for ADDI-DATA APCI_1032 cards
 606
 607           To compile this driver as a module, choose M here: the module will be
 608           called addi_apci_1032.
 609
 610 config COMEDI_ADDI_APCI_1500
 611         tristate "ADDI-DATA APCI_1500 support"
 612         ---help---
 613           Enable support for ADDI-DATA APCI_1500 cards
 614
 615           To compile this driver as a module, choose M here: the module will be
 616           called addi_apci_1500.
 617
 618 config COMEDI_ADDI_APCI_1516
 619         tristate "ADDI-DATA APCI-1016/1516/2016 support"
 620         select COMEDI_ADDI_WATCHDOG
 621         ---help---
 622           Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
 623           These are 16 channel, optically isolated, digital I/O boards. The 1516
 624           and 2016 boards also have a watchdog for resetting the outputs to "0".
 625
 626           To compile this driver as a module, choose M here: the module will be
 627           called addi_apci_1516.
 628
 629 config COMEDI_ADDI_APCI_1564
 630         tristate "ADDI-DATA APCI_1564 support"
 631         select COMEDI_ADDI_WATCHDOG
 632         ---help---
 633           Enable support for ADDI-DATA APCI_1564 cards
 634
 635           To compile this driver as a module, choose M here: the module will be
 636           called addi_apci_1564.
 637
 638 config COMEDI_ADDI_APCI_16XX
 639         tristate "ADDI-DATA APCI_16xx support"
 640         ---help---
 641           Enable support for ADDI-DATA APCI_16xx cards
 642
 643           To compile this driver as a module, choose M here: the module will be
 644           called addi_apci_16xx.
 645
 646 config COMEDI_ADDI_APCI_2032
 647         tristate "ADDI-DATA APCI_2032 support"
 648         select COMEDI_ADDI_WATCHDOG
 649         ---help---
 650           Enable support for ADDI-DATA APCI_2032 cards
 651
 652           To compile this driver as a module, choose M here: the module will be
 653           called addi_apci_2032.
 654
 655 config COMEDI_ADDI_APCI_2200
 656         tristate "ADDI-DATA APCI_2200 support"
 657         select COMEDI_ADDI_WATCHDOG
 658         ---help---
 659           Enable support for ADDI-DATA APCI_2200 cards
 660
 661           To compile this driver as a module, choose M here: the module will be
 662           called addi_apci_2200.
 663
 664 config COMEDI_ADDI_APCI_3120
 665         tristate "ADDI-DATA APCI_3120/3001 support"
 666         depends on HAS_DMA
 667         ---help---
 668           Enable support for ADDI-DATA APCI_3120/3001 cards
 669
 670           To compile this driver as a module, choose M here: the module will be
 671           called addi_apci_3120.
 672
 673 config COMEDI_ADDI_APCI_3501
 674         tristate "ADDI-DATA APCI_3501 support"
 675         ---help---
 676           Enable support for ADDI-DATA APCI_3501 cards
 677
 678           To compile this driver as a module, choose M here: the module will be
 679           called addi_apci_3501.
 680
 681 config COMEDI_ADDI_APCI_3XXX
 682         tristate "ADDI-DATA APCI_3xxx support"
 683         ---help---
 684           Enable support for ADDI-DATA APCI_3xxx cards
 685
 686           To compile this driver as a module, choose M here: the module will be
 687           called addi_apci_3xxx.
 688
 689 config COMEDI_ADL_PCI6208
 690         tristate "ADLink PCI-6208A support"
 691         ---help---
 692           Enable support for ADLink PCI-6208A cards
 693
 694           To compile this driver as a module, choose M here: the module will be
 695           called adl_pci6208.
 696
 697 config COMEDI_ADL_PCI7X3X
 698         tristate "ADLink PCI-723X/743X isolated digital i/o board support"
 699         ---help---
 700           Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
 701           Supported boards include the 32-channel PCI-7230 (16 in/16 out),
 702           PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
 703           PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
 704
 705           To compile this driver as a module, choose M here: the module will be
 706           called adl_pci7x3x.
 707
 708 config COMEDI_ADL_PCI8164
 709         tristate "ADLink PCI-8164 4 Axes Motion Control board support"
 710         ---help---
 711           Enable support for ADlink PCI-8164 4 Axes Motion Control board
 712
 713           To compile this driver as a module, choose M here: the module will be
 714           called adl_pci8164.
 715
 716 config COMEDI_ADL_PCI9111
 717         tristate "ADLink PCI-9111HR support"
 718         ---help---
 719           Enable support for ADlink PCI9111 cards
 720
 721           To compile this driver as a module, choose M here: the module will be
 722           called adl_pci9111.
 723
 724 config COMEDI_ADL_PCI9118
 725         tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 726         depends on HAS_DMA
 727         ---help---
 728           Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
 729
 730           To compile this driver as a module, choose M here: the module will be
 731           called adl_pci9118.
 732
 733 config COMEDI_ADV_PCI1710
 734         tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
 735         ---help---
 736           Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
 737           PCI-1713, PCI-1720 and PCI-1731
 738
 739           To compile this driver as a module, choose M here: the module will be
 740           called adv_pci1710.
 741
 742 config COMEDI_ADV_PCI1723
 743         tristate "Advantech PCI-1723 support"
 744         ---help---
 745           Enable support for Advantech PCI-1723 cards
 746
 747           To compile this driver as a module, choose M here: the module will be
 748           called adv_pci1723.
 749
 750 config COMEDI_ADV_PCI1724
 751         tristate "Advantech PCI-1724U support"
 752         ---help---
 753           Enable support for Advantech PCI-1724U cards.  These are 32-channel
 754           analog output cards with voltage and current loop output ranges and
 755           14-bit resolution.
 756
 757           To compile this driver as a module, choose M here: the module will be
 758           called adv_pci1724.
 759
 760 config COMEDI_ADV_PCI_DIO
 761         tristate "Advantech PCI DIO card support"
 762         select COMEDI_8255
 763         ---help---
 764           Enable support for Advantech PCI DIO cards
 765           PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
 766           PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
 767           PCI-1760 and PCI-1762
 768
 769           To compile this driver as a module, choose M here: the module will be
 770           called adv_pci_dio.
 771
 772 config COMEDI_AMPLC_DIO200_PCI
 773         tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
 774         select COMEDI_AMPLC_DIO200
 775         ---help---
 776           Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
 777           and PCIe296 DIO boards.
 778
 779           To compile this driver as a module, choose M here: the module will be
 780           called amplc_dio200_pci.
 781
 782 config COMEDI_AMPLC_PC236_PCI
 783         tristate "Amplicon PCI236 DIO board support"
 784         select COMEDI_AMPLC_PC236
 785         ---help---
 786           Enable support for Amplicon PCI236 DIO board.
 787
 788           To compile this driver as a module, choose M here: the module will be
 789           called amplc_pci236.
 790
 791 config COMEDI_AMPLC_PC263_PCI
 792         tristate "Amplicon PCI263 relay board support"
 793         ---help---
 794           Enable support for Amplicon PCI263 relay board.  This is a PCI board
 795           with 16 reed relay output channels.
 796
 797           To compile this driver as a module, choose M here: the module will be
 798           called amplc_pci263.
 799
 800 config COMEDI_AMPLC_PCI224
 801         tristate "Amplicon PCI224 and PCI234 support"
 802         ---help---
 803           Enable support for Amplicon PCI224 and PCI234 AO boards
 804
 805           To compile this driver as a module, choose M here: the module will be
 806           called amplc_pci224.
 807
 808 config COMEDI_AMPLC_PCI230
 809         tristate "Amplicon PCI230 and PCI260 support"
 810         select COMEDI_8255
 811         ---help---
 812           Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
 813           boards
 814
 815           To compile this driver as a module, choose M here: the module will be
 816           called amplc_pci230.
 817
 818 config COMEDI_CONTEC_PCI_DIO
 819         tristate "Contec PIO1616L digital I/O board support"
 820         ---help---
 821           Enable support for the Contec PIO1616L digital I/O board
 822
 823           To compile this driver as a module, choose M here: the module will be
 824           called contec_pci_dio.
 825
 826 config COMEDI_DAS08_PCI
 827         tristate "DAS-08 PCI support"
 828         select COMEDI_DAS08
 829         ---help---
 830           Enable support for PCI DAS-08 cards.
 831
 832           To compile this driver as a module, choose M here: the module will be
 833           called das08_pci.
 834
 835 config COMEDI_DT3000
 836         tristate "Data Translation DT3000 series support"
 837         ---help---
 838           Enable support for Data Translation DT3000 series
 839           DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
 840           DT3004-200
 841
 842           To compile this driver as a module, choose M here: the module will be
 843           called dt3000.
 844
 845 config COMEDI_DYNA_PCI10XX
 846         tristate "Dynalog PCI DAQ series support"
 847         ---help---
 848           Enable support for Dynalog PCI DAQ series
 849           PCI-1050
 850
 851           To compile this driver as a module, choose M here: the module will be
 852           called dyna_pci10xx.
 853
 854 config COMEDI_GSC_HPDI
 855         tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
 856         ---help---
 857           Enable support for General Standards Corporation high speed parallel
 858           digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
 859           Only receive mode works, transmit not supported.
 860
 861           To compile this driver as a module, choose M here: the module will be
 862           called gsc_hpdi.
 863
 864 config COMEDI_MF6X4
 865         tristate "Humusoft MF634 and MF624 DAQ Card support"
 866         ---help---
 867           This driver supports both Humusoft MF634 and MF624 Data acquisition
 868           cards. The legacy Humusoft MF614 card is not supported.
 869
 870 config COMEDI_ICP_MULTI
 871         tristate "Inova ICP_MULTI support"
 872         ---help---
 873           Enable support for Inova ICP_MULTI card
 874
 875           To compile this driver as a module, choose M here: the module will be
 876           called icp_multi.
 877
 878 config COMEDI_DAQBOARD2000
 879         tristate "IOtech DAQboard/2000 support"
 880         select COMEDI_8255
 881         ---help---
 882           Enable support for the IOtech DAQboard/2000
 883
 884           To compile this driver as a module, choose M here: the module will be
 885           called daqboard2000.
 886
 887 config COMEDI_JR3_PCI
 888         tristate "JR3/PCI force sensor board support"
 889         ---help---
 890           Enable support for JR3/PCI force sensor boards
 891
 892           To compile this driver as a module, choose M here: the module will be
 893           called jr3_pci.
 894
 895 config COMEDI_KE_COUNTER
 896         tristate "Kolter-Electronic PCI Counter 1 card support"
 897         ---help---
 898           Enable support for Kolter-Electronic PCI Counter 1 cards
 899
 900           To compile this driver as a module, choose M here: the module will be
 901           called ke_counter.
 902
 903 config COMEDI_CB_PCIDAS64
 904         tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
 905         select COMEDI_8255
 906         ---help---
 907           Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
 908           60xx, and 4020 series with the PLX 9080 PCI controller
 909
 910           To compile this driver as a module, choose M here: the module will be
 911           called cb_pcidas64.
 912
 913 config COMEDI_CB_PCIDAS
 914         tristate "MeasurementComputing PCI-DAS support"
 915         select COMEDI_8255
 916         ---help---
 917           Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
 918           AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
 919           PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
 920           and PCI_DAS1002.
 921
 922           To compile this driver as a module, choose M here: the module will be
 923           called cb_pcidas.
 924
 925 config COMEDI_CB_PCIDDA
 926         tristate "MeasurementComputing PCI-DDA series support"
 927         select COMEDI_8255
 928         ---help---
 929           Enable support for ComputerBoards/MeasurementComputing PCI-DDA
 930           series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
 931           PCI-DDA04/16 and PCI-DDA02/16
 932
 933           To compile this driver as a module, choose M here: the module will be
 934           called cb_pcidda.
 935
 936 config COMEDI_CB_PCIMDAS
 937         tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
 938         select COMEDI_8255
 939         ---help---
 940           Enable support for ComputerBoards/MeasurementComputing PCI Migration
 941           series PCIM-DAS1602/16 and PCIe-DAS1602/16.
 942
 943           To compile this driver as a module, choose M here: the module will be
 944           called cb_pcimdas.
 945
 946 config COMEDI_CB_PCIMDDA
 947         tristate "MeasurementComputing PCIM-DDA06-16 support"
 948         select COMEDI_8255
 949         ---help---
 950           Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
 951
 952           To compile this driver as a module, choose M here: the module will be
 953           called cb_pcimdda.
 954
 955 config COMEDI_ME4000
 956         tristate "Meilhaus ME-4000 support"
 957         ---help---
 958           Enable support for Meilhaus PCI data acquisition cards
 959           ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
 960
 961           To compile this driver as a module, choose M here: the module will be
 962           called me4000.
 963
 964 config COMEDI_ME_DAQ
 965         tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
 966         ---help---
 967           Enable support for Meilhaus PCI data acquisition cards
 968           ME-2000i, ME-2600i and ME-3000vm1
 969
 970           To compile this driver as a module, choose M here: the module will be
 971           called me_daq.
 972
 973 config COMEDI_NI_6527
 974         tristate "NI 6527 support"
 975         ---help---
 976           Enable support for the National Instruments 6527 PCI card
 977
 978           To compile this driver as a module, choose M here: the module will be
 979           called ni_6527.
 980
 981 config COMEDI_NI_65XX
 982         tristate "NI 65xx static dio PCI card support"
 983         ---help---
 984           Enable support for National Instruments 65xx static dio boards.
 985           Supported devices: National Instruments PCI-6509 (ni_65xx),
 986           PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
 987           PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
 988           PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
 989
 990           To compile this driver as a module, choose M here: the module will be
 991           called ni_65xx.
 992
 993 config COMEDI_NI_660X
 994         tristate "NI 660x counter/timer PCI card support"
 995         depends on HAS_DMA
 996         select COMEDI_NI_TIOCMD
 997         ---help---
 998           Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
 999           PXI-6602, PXI-6608 and PXI-6624.
1000
1001           To compile this driver as a module, choose M here: the module will be
1002           called ni_660x.
1003
1004 config COMEDI_NI_670X
1005         tristate "NI 670x PCI card support"
1006         ---help---
1007           Enable support for National Instruments PCI-6703 and PCI-6704
1008
1009           To compile this driver as a module, choose M here: the module will be
1010           called ni_670x.
1011
1012 config COMEDI_NI_LABPC_PCI
1013         tristate "NI Lab-PC PCI-1200 support"
1014         select COMEDI_NI_LABPC
1015         ---help---
1016           Enable support for National Instruments Lab-PC PCI-1200.
1017
1018           To compile this driver as a module, choose M here: the module will be
1019           called ni_labpc_pci.
1020
1021 config COMEDI_NI_PCIDIO
1022         tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1023         depends on HAS_DMA
1024         select COMEDI_MITE
1025         select COMEDI_8255
1026         ---help---
1027           Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1028           PCI-6533 and PCI-6534
1029
1030           To compile this driver as a module, choose M here: the module will be
1031           called ni_pcidio.
1032
1033 config COMEDI_NI_PCIMIO
1034         tristate "NI PCI-MIO-E series and M series support"
1035         depends on HAS_DMA
1036         select COMEDI_NI_TIOCMD
1037         select COMEDI_8255
1038         ---help---
1039           Enable support for National Instruments PCI-MIO-E series and M series
1040           (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1041           PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1042           PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1043           PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1044           PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1045           PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1046           PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1047           PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1048           PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1049
1050           To compile this driver as a module, choose M here: the module will be
1051           called ni_pcimio.
1052
1053 config COMEDI_RTD520
1054         tristate "Real Time Devices PCI4520/DM7520 support"
1055         ---help---
1056           Enable support for Real Time Devices PCI4520/DM7520
1057
1058           To compile this driver as a module, choose M here: the module will be
1059           called rtd520.
1060
1061 config COMEDI_S626
1062         tristate "Sensoray 626 support"
1063         ---help---
1064           Enable support for Sensoray 626
1065
1066           To compile this driver as a module, choose M here: the module will be
1067           called s626.
1068
1069 config COMEDI_MITE
1070         depends on HAS_DMA
1071         tristate
1072
1073 config COMEDI_NI_TIOCMD
1074         tristate
1075         depends on HAS_DMA
1076         select COMEDI_NI_TIO
1077         select COMEDI_MITE
1078
1079 endif # COMEDI_PCI_DRIVERS
1080
1081 menuconfig COMEDI_PCMCIA_DRIVERS
1082         tristate "Comedi PCMCIA drivers"
1083         depends on PCMCIA
1084         ---help---
1085           Enable support for comedi PCMCIA drivers.
1086
1087           To compile this support as a module, choose M here: the module will
1088           be called comedi_pcmcia.
1089
1090 if COMEDI_PCMCIA_DRIVERS
1091
1092 config COMEDI_CB_DAS16_CS
1093         tristate "CB DAS16 series PCMCIA support"
1094         ---help---
1095           Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1096           cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1097
1098           To compile this driver as a module, choose M here: the module will be
1099           called cb_das16_cs.
1100
1101 config COMEDI_DAS08_CS
1102         tristate "CB DAS08 PCMCIA support"
1103         select COMEDI_DAS08
1104         ---help---
1105           Enable support for the ComputerBoards/MeasurementComputing DAS-08
1106           PCMCIA card
1107
1108           To compile this driver as a module, choose M here: the module will be
1109           called das08_cs.
1110
1111 config COMEDI_NI_DAQ_700_CS
1112         tristate "NI DAQCard-700 PCMCIA support"
1113         ---help---
1114           Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1115
1116           To compile this driver as a module, choose M here: the module will be
1117           called ni_daq_700.
1118
1119 config COMEDI_NI_DAQ_DIO24_CS
1120         tristate "NI DAQ-Card DIO-24 PCMCIA support"
1121         select COMEDI_8255
1122         ---help---
1123           Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1124
1125           To compile this driver as a module, choose M here: the module will be
1126           called ni_daq_dio24.
1127
1128 config COMEDI_NI_LABPC_CS
1129         tristate "NI DAQCard-1200 PCMCIA support"
1130         select COMEDI_NI_LABPC
1131         ---help---
1132           Enable support for the National Instruments PCMCIA DAQCard-1200
1133
1134           To compile this driver as a module, choose M here: the module will be
1135           called ni_labpc_cs.
1136
1137 config COMEDI_NI_MIO_CS
1138         tristate "NI DAQCard E series PCMCIA support"
1139         select COMEDI_NI_TIO
1140         select COMEDI_8255
1141         ---help---
1142           Enable support for the National Instruments PCMCIA DAQCard E series
1143           DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1144           and DAQCard-6036E
1145
1146           To compile this driver as a module, choose M here: the module will be
1147           called ni_mio_cs.
1148
1149 config COMEDI_QUATECH_DAQP_CS
1150         tristate "Quatech DAQP PCMCIA data capture card support"
1151         ---help---
1152           Enable support for the Quatech DAQP PCMCIA data capture cards
1153           DAQP-208 and DAQP-308
1154
1155           To compile this driver as a module, choose M here: the module will be
1156           called quatech_daqp_cs.
1157
1158 endif # COMEDI_PCMCIA_DRIVERS
1159
1160 menuconfig COMEDI_USB_DRIVERS
1161         tristate "Comedi USB drivers"
1162         depends on USB
1163         ---help---
1164           Enable support for comedi USB drivers.
1165
1166           To compile this support as a module, choose M here: the module will
1167           be called comedi_usb.
1168
1169 if COMEDI_USB_DRIVERS
1170
1171 config COMEDI_DT9812
1172         tristate "DataTranslation DT9812 USB module support"
1173         ---help---
1174           Enable support for the Data Translation DT9812 USB module
1175
1176           To compile this driver as a module, choose M here: the module will be
1177           called dt9812.
1178
1179 config COMEDI_NI_USB6501
1180         tristate "NI USB-6501 support"
1181         ---help---
1182           Enable support for the National Instruments USB-6501 module.
1183
1184           The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1185           provides 24 digital I/O lines channels and one 32-bit counter.
1186
1187           To compile this driver as a module, choose M here: the module will be
1188           called ni_usb6501.
1189
1190 config COMEDI_USBDUX
1191         tristate "ITL USB-DUX-D support"
1192         ---help---
1193           Enable support for the Incite Technology Ltd USB-DUX-D Board
1194
1195           To compile this driver as a module, choose M here: the module will be
1196           called usbdux.
1197
1198 config COMEDI_USBDUXFAST
1199         tristate "ITL USB-DUXfast support"
1200         ---help---
1201           Enable support for the Incite Technology Ltd USB-DUXfast Board
1202
1203           To compile this driver as a module, choose M here: the module will be
1204           called usbduxfast.
1205
1206 config COMEDI_USBDUXSIGMA
1207         tristate "ITL USB-DUXsigma support"
1208         ---help---
1209           Enable support for the Incite Technology Ltd USB-DUXsigma Board
1210
1211           To compile this driver as a module, choose M here: the module will be
1212           called usbduxsigma.
1213
1214 config COMEDI_VMK80XX
1215         tristate "Velleman VM110/VM140 USB Board support"
1216         ---help---
1217           Build the Velleman USB Board Low-Level Driver supporting the
1218           K8055/K8061 aka VM110/VM140 devices
1219
1220           To compile this driver as a module, choose M here: the module will be
1221           called vmk80xx.
1222
1223 endif # COMEDI_USB_DRIVERS
1224
1225 config COMEDI_8255
1226         tristate "Generic 8255 support"
1227         ---help---
1228           Enable generic 8255 support.
1229
1230           You should enable compilation this driver if you plan to use a board
1231           that has an 8255 chip. For multifunction boards, the main driver will
1232           configure the 8255 subdevice automatically.
1233
1234           Note that most PCI based 8255 boards use the 8255_pci driver as a
1235           wrapper around this driver.
1236
1237           To compile this driver as a module, choose M here: the module will be
1238           called 8255.
1239
1240 config COMEDI_KCOMEDILIB
1241         tristate "Comedi kcomedilib"
1242         ---help---
1243           Build the kcomedilib.
1244
1245           This is a kernel module used to open and manipulate Comedi devices
1246           from within kernel code.  It is currently only used by the
1247           comedi_bond driver, and its functionality has been stripped down to
1248           the needs of that driver, so is currently not very useful for
1249           anything else.
1250
1251           To compile kcomedilib as a module, choose M here: the module will be
1252           called kcomedilib.
1253
1254 config COMEDI_AMPLC_DIO200
1255         tristate
1256
1257 config COMEDI_AMPLC_PC236
1258         tristate
1259         select COMEDI_8255
1260
1261 config COMEDI_DAS08
1262         tristate
1263         select COMEDI_8255
1264
1265 config COMEDI_ISADMA
1266         tristate
1267
1268 config COMEDI_NI_LABPC
1269         tristate
1270         select COMEDI_8255
1271
1272 config COMEDI_NI_LABPC_ISADMA
1273         tristate
1274         select COMEDI_ISADMA
1275
1276 config COMEDI_NI_TIO
1277         tristate
1278
1279 endif # COMEDI