drivers/staging/comedi/Kconfig

   1 config COMEDI
   2         tristate "Data acquisition support (comedi)"
   3         ---help---
   4           Enable support for a wide range of data acquisition devices
   5           for Linux.
   6
   7 if COMEDI
   8
   9 config COMEDI_DEBUG
  10         bool "Comedi debugging"
  11         ---help---
  12           This is an option for use by developers; most people should
  13           say N here. This enables comedi core and driver debugging.
  14
  15 config COMEDI_DEFAULT_BUF_SIZE_KB
  16         int "Comedi default initial asynchronous buffer size in KiB"
  17         default "2048"
  18         ---help---
  19           This is the default asynchronous buffer size which is used for
  20           commands running in the background in kernel space.  This
  21           defaults to 2048 KiB of memory so that a 16 channel card
  22           running at 10 kHz has of 2-4 seconds of buffer.
  23
  24 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
  25         int "Comedi default maximum asynchronous buffer size in KiB"
  26         default "20480"
  27         ---help---
  28           This is the default maximum asynchronous buffer size which can
  29           be requested by a userspace program without root privileges.
  30           This is set to 20480 KiB so that a fast I/O card with 16
  31           channels running at 100 kHz has 2-4 seconds of buffer.
  32
  33 menuconfig COMEDI_MISC_DRIVERS
  34         bool "Comedi misc drivers"
  35         ---help---
  36           Enable comedi misc drivers to be built
  37
  38           Note that the answer to this question won't directly affect the
  39           kernel: saying N will just cause the configurator to skip all
  40           the questions about misc non-hardware comedi drivers.
  41
  42 if COMEDI_MISC_DRIVERS
  43
  44 config COMEDI_BOND
  45         tristate "Comedi device bonding support"
  46         select COMEDI_KCOMEDILIB
  47         ---help---
  48           Enable support for a driver to 'bond' (merge) multiple subdevices
  49           from multiple devices together as one.
  50
  51           Currently, it only handles digital I/O subdevices.
  52
  53           To compile this driver as a module, choose M here: the module will be
  54           called comedi_bond.
  55
  56 config COMEDI_TEST
  57         tristate "Fake waveform generator support"
  58         ---help---
  59           Enable support for the fake waveform generator.
  60           This driver is mainly for testing purposes, but can also be used to
  61           generate sample waveforms on systems that don't have data acquisition
  62           hardware.
  63
  64           To compile this driver as a module, choose M here: the module will be
  65           called comedi_test.
  66
  67 config COMEDI_PARPORT
  68         tristate "Parallel port support"
  69         ---help---
  70           Enable support for the standard parallel port.
  71           A cheap and easy way to get a few more digital I/O lines. Steal
  72           additional parallel ports from old computers or your neighbors'
  73           computers.
  74
  75           To compile this driver as a module, choose M here: the module will be
  76           called comedi_parport.
  77
  78 config COMEDI_SERIAL2002
  79         tristate "Driver for serial connected hardware"
  80         ---help---
  81           Enable support for serial connected hardware
  82
  83           To compile this driver as a module, choose M here: the module will be
  84           called serial2002.
  85
  86 config COMEDI_SSV_DNP
  87         tristate "SSV Embedded Systems DIL/Net-PC support"
  88         depends on X86_32 || COMPILE_TEST
  89         ---help---
  90           Enable support for SSV Embedded Systems DIL/Net-PC
  91
  92           To compile this driver as a module, choose M here: the module will be
  93           called ssv_dnp.
  94
  95 endif # COMEDI_MISC_DRIVERS
  96
  97 menuconfig COMEDI_ISA_DRIVERS
  98         bool "Comedi ISA and PC/104 drivers"
  99         ---help---
 100           Enable comedi ISA and PC/104 drivers to be built
 101
 102           Note that the answer to this question won't directly affect the
 103           kernel: saying N will just cause the configurator to skip all
 104           the questions about ISA and PC/104 comedi drivers.
 105
 106 if COMEDI_ISA_DRIVERS
 107
 108 config COMEDI_PCL711
 109         tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
 110         select COMEDI_8254
 111         ---help---
 112           Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
 113
 114           To compile this driver as a module, choose M here: the module will be
 115           called pcl711.
 116
 117 config COMEDI_PCL724
 118         tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
 119         select COMEDI_8255
 120         ---help---
 121           Enable support for ISA and PC/104 based 8255 digital i/o boards. This
 122           driver provides a legacy comedi driver wrapper for the generic 8255
 123           support driver.
 124
 125           Supported boards include:
 126             Advantech PCL-724            24 channels
 127             Advantech PCL-722            144 (or 96) channels
 128             Advantech PCL-731            48 channels
 129             ADlink ACL-7122              144 (or 96) channels
 130             ADlink ACL-7124              24 channels
 131             ADlink PET-48DIO             48 channels
 132             WinSystems PCM-IO48          48 channels (PC/104)
 133             Diamond Systems ONYX-MM-DIO  48 channels (PC/104)
 134
 135           To compile this driver as a module, choose M here: the module will be
 136           called pcl724.
 137
 138 config COMEDI_PCL726
 139         tristate "Advantech PCL-726 and compatible ISA card support"
 140         ---help---
 141           Enable support for Advantech PCL-726 and compatible ISA cards.
 142
 143           To compile this driver as a module, choose M here: the module will be
 144           called pcl726.
 145
 146 config COMEDI_PCL730
 147         tristate "Simple Digital I/O board support (8-bit ports)"
 148         ---help---
 149           Enable support for various simple ISA or PC/104 Digital I/O boards.
 150           These boards all use 8-bit I/O ports.
 151
 152           Advantech PCL-730             iso - 16 in/16 out  ttl - 16 in/16 out
 153           ICP ISO-730                   iso - 16 in/16 out  ttl - 16 in/16 out
 154           ADlink ACL-7130               iso - 16 in/16 out  ttl - 16 in/16 out
 155           Advantech PCM-3730            iso - 8 in/8 out    ttl - 16 in/16 out
 156           Advantech PCL-725             iso - 8 in/8 out
 157           ICP P8R8-DIO                  iso - 8 in/8 out
 158           ADlink ACL-7225b              iso - 16 in/16 out
 159           ICP P16R16-DIO                iso - 16 in/16 out
 160           Advantech PCL-733             iso - 32 in
 161           Advantech PCL-734             iso - 32 out
 162           Diamond Systems OPMM-1616-XT  iso - 16 in/16 out
 163           Diamond Systems PEARL-MM-P    iso - 16 out
 164           Diamond Systems IR104-PBF     iso - 20 in/20 out
 165
 166           To compile this driver as a module, choose M here: the module will be
 167           called pcl730.
 168
 169 config COMEDI_PCL812
 170         tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
 171         select COMEDI_ISADMA if ISA_DMA_API
 172         select COMEDI_8254
 173         ---help---
 174           Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
 175           ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
 176           A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
 177
 178           To compile this driver as a module, choose M here: the module will be
 179           called pcl812.
 180
 181 config COMEDI_PCL816
 182         tristate "Advantech PCL-814 and PCL-816 ISA card support"
 183         select COMEDI_ISADMA if ISA_DMA_API
 184         select COMEDI_8254
 185         ---help---
 186           Enable support for Advantech PCL-814 and PCL-816 ISA cards
 187
 188           To compile this driver as a module, choose M here: the module will be
 189           called pcl816.
 190
 191 config COMEDI_PCL818
 192         tristate "Advantech PCL-718 and PCL-818 ISA card support"
 193         select COMEDI_ISADMA if ISA_DMA_API
 194         select COMEDI_8254
 195         ---help---
 196           Enable support for Advantech PCL-818 ISA cards
 197           PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
 198
 199           To compile this driver as a module, choose M here: the module will be
 200           called pcl818.
 201
 202 config COMEDI_PCM3724
 203         tristate "Advantech PCM-3724 PC/104 card support"
 204         select COMEDI_8255
 205         ---help---
 206           Enable support for Advantech PCM-3724 PC/104 cards.
 207
 208           To compile this driver as a module, choose M here: the module will be
 209           called pcm3724.
 210
 211 config COMEDI_AMPLC_DIO200_ISA
 212         tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
 213         select COMEDI_AMPLC_DIO200
 214         ---help---
 215           Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
 216           PC272E ISA DIO boards
 217
 218           To compile this driver as a module, choose M here: the module will be
 219           called amplc_dio200.
 220
 221 config COMEDI_AMPLC_PC236_ISA
 222         tristate "Amplicon PC36AT DIO board support"
 223         select COMEDI_AMPLC_PC236
 224         ---help---
 225           Enable support for Amplicon PC36AT ISA DIO board.
 226
 227           To compile this driver as a module, choose M here: the module will be
 228           called amplc_pc236.
 229
 230 config COMEDI_AMPLC_PC263_ISA
 231         tristate "Amplicon PC263 relay board support"
 232         ---help---
 233           Enable support for Amplicon PC263 ISA relay board.  This board has
 234           16 reed relay output channels.
 235
 236           To compile this driver as a module, choose M here: the module will be
 237           called amplc_pc263.
 238
 239 config COMEDI_RTI800
 240         tristate "Analog Devices RTI-800/815 ISA card support"
 241         ---help---
 242           Enable support for Analog Devices RTI-800/815 ISA cards
 243
 244           To compile this driver as a module, choose M here: the module will be
 245           called rti800.
 246
 247 config COMEDI_RTI802
 248         tristate "Analog Devices RTI-802 ISA card support"
 249         ---help---
 250           Enable support for Analog Devices RTI-802 ISA cards
 251
 252           To compile this driver as a module, choose M here: the module will be
 253           called rti802.
 254
 255 config COMEDI_DAC02
 256         tristate "Keithley Metrabyte DAC02 compatible ISA card support"
 257         ---help---
 258           Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
 259
 260           To compile this driver as a module, choose M here: the module will be
 261           called dac02.
 262
 263 config COMEDI_DAS16M1
 264         tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
 265         select COMEDI_8254
 266         select COMEDI_8255
 267         ---help---
 268           Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
 269
 270           To compile this driver as a module, choose M here: the module will be
 271           called das16m1.
 272
 273 config COMEDI_DAS08_ISA
 274         tristate "DAS-08 compatible ISA and PC/104 card support"
 275         select COMEDI_DAS08
 276         ---help---
 277           Enable support for Keithley Metrabyte/ComputerBoards DAS08
 278           and compatible ISA and PC/104 cards:
 279           Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
 280           DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
 281           DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
 282
 283           To compile this driver as a module, choose M here: the module will be
 284           called das08_isa.
 285
 286 config COMEDI_DAS16
 287         tristate "DAS-16 compatible ISA and PC/104 card support"
 288         select COMEDI_ISADMA if ISA_DMA_API
 289         select COMEDI_8254
 290         select COMEDI_8255
 291         ---help---
 292           Enable support for Keithley Metrabyte/ComputerBoards DAS16
 293           and compatible ISA and PC/104 cards:
 294           Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
 295           DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
 296           ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
 297           PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
 298           CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
 299           CIO-DAS1602/16, CIO-DAS16/330
 300
 301           To compile this driver as a module, choose M here: the module will be
 302           called das16.
 303
 304 config COMEDI_DAS800
 305         tristate "DAS800 and compatible ISA card support"
 306         select COMEDI_8254
 307         ---help---
 308           Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
 309           Keithley Metrabyte DAS-800, DAS-801, DAS-802
 310           Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
 311           CIO-DAS802/16
 312
 313           To compile this driver as a module, choose M here: the module will be
 314           called das800.
 315
 316 config COMEDI_DAS1800
 317         tristate "DAS1800 and compatible ISA card support"
 318         select COMEDI_ISADMA if ISA_DMA_API
 319         select COMEDI_8254
 320         ---help---
 321           Enable support for DAS1800 and compatible ISA cards
 322           Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
 323           DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
 324           DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
 325           DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
 326           DAS-1802AO
 327
 328           To compile this driver as a module, choose M here: the module will be
 329           called das1800.
 330
 331 config COMEDI_DAS6402
 332         tristate "DAS6402 and compatible ISA card support"
 333         select COMEDI_8254
 334         ---help---
 335           Enable support for DAS6402 and compatible ISA cards
 336           Computerboards, Keithley Metrabyte DAS6402 and compatibles
 337
 338           To compile this driver as a module, choose M here: the module will be
 339           called das6402.
 340
 341 config COMEDI_DT2801
 342         tristate "Data Translation DT2801 ISA card support"
 343         ---help---
 344           Enable support for Data Translation DT2801 ISA cards
 345
 346           To compile this driver as a module, choose M here: the module will be
 347           called dt2801.
 348
 349 config COMEDI_DT2811
 350         tristate "Data Translation DT2811 ISA card support"
 351         ---help---
 352           Enable support for Data Translation DT2811 ISA cards
 353
 354           To compile this driver as a module, choose M here: the module will be
 355           called dt2811.
 356
 357 config COMEDI_DT2814
 358         tristate "Data Translation DT2814 ISA card support"
 359         ---help---
 360           Enable support for Data Translation DT2814 ISA cards
 361
 362           To compile this driver as a module, choose M here: the module will be
 363           called dt2814.
 364
 365 config COMEDI_DT2815
 366         tristate "Data Translation DT2815 ISA card support"
 367         ---help---
 368           Enable support for Data Translation DT2815 ISA cards
 369
 370           To compile this driver as a module, choose M here: the module will be
 371           called dt2815.
 372
 373 config COMEDI_DT2817
 374         tristate "Data Translation DT2817 ISA card support"
 375         ---help---
 376           Enable support for Data Translation DT2817 ISA cards
 377
 378           To compile this driver as a module, choose M here: the module will be
 379           called dt2817.
 380
 381 config COMEDI_DT282X
 382         tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 383         select COMEDI_ISADMA if ISA_DMA_API
 384         ---help---
 385           Enable support for Data Translation DT2821 series including DT-EZ
 386           DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
 387           DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
 388           DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
 389
 390           To compile this driver as a module, choose M here: the module will be
 391           called dt282x.
 392
 393 config COMEDI_DMM32AT
 394         tristate "Diamond Systems MM-32-AT PC/104 board support"
 395         select COMEDI_8255
 396         ---help---
 397           Enable support for Diamond Systems MM-32-AT PC/104 boards
 398
 399           To compile this driver as a module, choose M here: the module will be
 400           called dmm32at.
 401
 402 config COMEDI_FL512
 403         tristate "FL512 ISA card support"
 404         ---help---
 405           Enable support for FL512 ISA card
 406
 407           To compile this driver as a module, choose M here: the module will be
 408           called fl512.
 409
 410 config COMEDI_AIO_AIO12_8
 411         tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
 412         select COMEDI_8254
 413         select COMEDI_8255
 414         ---help---
 415           Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
 416
 417           To compile this driver as a module, choose M here: the module will be
 418           called aio_aio12_8.
 419
 420 config COMEDI_AIO_IIRO_16
 421         tristate "I/O Products PC/104 IIRO16 Board support"
 422         ---help---
 423           Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
 424           Input Board
 425
 426           To compile this driver as a module, choose M here: the module will be
 427           called aio_iiro_16.
 428
 429 config COMEDI_II_PCI20KC
 430         tristate "Intelligent Instruments PCI-20001C carrier support"
 431         depends on HAS_IOMEM
 432         ---help---
 433           Enable support for Intelligent Instruments PCI-20001C carrier
 434           PCI-20001, PCI-20006 and PCI-20341
 435
 436           To compile this driver as a module, choose M here: the module will be
 437           called ii_pci20kc.
 438
 439 config COMEDI_C6XDIGIO
 440         tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
 441         ---help---
 442           Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
 443           card
 444
 445           To compile this driver as a module, choose M here: the module will be
 446           called c6xdigio.
 447
 448 config COMEDI_MPC624
 449         tristate "Micro/sys MPC-624 PC/104 board support"
 450         ---help---
 451           Enable support for Micro/sys MPC-624 PC/104 board
 452
 453           To compile this driver as a module, choose M here: the module will be
 454           called mpc624.
 455
 456 config COMEDI_ADQ12B
 457         tristate "MicroAxial ADQ12-B data acquisition and control card support"
 458         ---help---
 459           Enable MicroAxial ADQ12-B daq and control card support.
 460
 461           To compile this driver as a module, choose M here: the module will be
 462           called adq12b.
 463
 464 config COMEDI_NI_AT_A2150
 465         tristate "NI AT-A2150 ISA card support"
 466         select COMEDI_ISADMA if ISA_DMA_API
 467         select COMEDI_8254
 468         ---help---
 469           Enable support for National Instruments AT-A2150 cards
 470
 471           To compile this driver as a module, choose M here: the module will be
 472           called ni_at_a2150.
 473
 474 config COMEDI_NI_AT_AO
 475         tristate "NI AT-AO-6/10 EISA card support"
 476         select COMEDI_8254
 477         ---help---
 478           Enable support for National Instruments AT-AO-6/10 cards
 479
 480           To compile this driver as a module, choose M here: the module will be
 481           called ni_at_ao.
 482
 483 config COMEDI_NI_ATMIO
 484         tristate "NI AT-MIO E series ISA-PNP card support"
 485         select COMEDI_8255
 486         select COMEDI_NI_TIO
 487         ---help---
 488           Enable support for National Instruments AT-MIO E series cards
 489           National Instruments AT-MIO-16E-1 (ni_atmio),
 490           AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
 491           AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
 492
 493           To compile this driver as a module, choose M here: the module will be
 494           called ni_atmio.
 495
 496 config COMEDI_NI_ATMIO16D
 497         tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
 498         select COMEDI_8255
 499         ---help---
 500           Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
 501
 502           To compile this driver as a module, choose M here: the module will be
 503           called ni_atmio16d.
 504
 505 config COMEDI_NI_LABPC_ISA
 506         tristate "NI Lab-PC and compatibles ISA support"
 507         select COMEDI_NI_LABPC
 508         ---help---
 509           Enable support for National Instruments Lab-PC and compatibles
 510           Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
 511           Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
 512           not yet been added to the driver.
 513
 514           To compile this driver as a module, choose M here: the module will be
 515           called ni_labpc.
 516
 517 config COMEDI_PCMAD
 518         tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
 519         ---help---
 520           Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
 521
 522           To compile this driver as a module, choose M here: the module will be
 523           called pcmad.
 524
 525 config COMEDI_PCMDA12
 526         tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
 527         ---help---
 528           Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
 529           Note that the board is not ISA-PNP capable and thus needs the I/O
 530           port comedi_config parameter.
 531
 532           To compile this driver as a module, choose M here: the module will be
 533           called pcmda12.
 534
 535 config COMEDI_PCMMIO
 536         tristate "Winsystems PCM-MIO PC/104 board support"
 537         ---help---
 538           Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
 539
 540           To compile this driver as a module, choose M here: the module will be
 541           called pcmmio.
 542
 543 config COMEDI_PCMUIO
 544         tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
 545         ---help---
 546           Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
 547
 548           To compile this driver as a module, choose M here: the module will be
 549           called pcmuio.
 550
 551 config COMEDI_MULTIQ3
 552         tristate "Quanser Consulting MultiQ-3 ISA card support"
 553         ---help---
 554           Enable support for Quanser Consulting MultiQ-3 ISA cards
 555
 556           To compile this driver as a module, choose M here: the module will be
 557           called multiq3.
 558
 559 config COMEDI_S526
 560         tristate "Sensoray s526 support"
 561         ---help---
 562           Enable support for Sensoray s526
 563
 564           To compile this driver as a module, choose M here: the module will be
 565           called s526.
 566
 567 endif # COMEDI_ISA_DRIVERS
 568
 569 menuconfig COMEDI_PCI_DRIVERS
 570         tristate "Comedi PCI drivers"
 571         depends on PCI
 572         ---help---
 573           Enable support for comedi PCI drivers.
 574
 575           To compile this support as a module, choose M here: the module will
 576           be called comedi_pci.
 577
 578 if COMEDI_PCI_DRIVERS
 579
 580 config COMEDI_8255_PCI
 581         tristate "Generic PCI based 8255 digital i/o board support"
 582         select COMEDI_8255
 583         ---help---
 584           Enable support for PCI based 8255 digital i/o boards. This driver
 585           provides a PCI wrapper around the generic 8255 driver.
 586
 587           Supported boards:
 588             ADlink - PCI-7224, PCI-7248, and PCI-7296
 589             Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
 590                                     PCI-DIO96H
 591             National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
 592                                    PCI-6503B, PCI-6503X, and PXI-6503
 593
 594           To compile this driver as a module, choose M here: the module will
 595           be called 8255_pci.
 596
 597 config COMEDI_ADDI_WATCHDOG
 598         tristate
 599         ---help---
 600           Provides support for the watchdog subdevice found on many ADDI-DATA
 601           boards. This module will be automatically selected when needed. The
 602           module will be called addi_watchdog.
 603
 604 config COMEDI_ADDI_APCI_1032
 605         tristate "ADDI-DATA APCI_1032 support"
 606         ---help---
 607           Enable support for ADDI-DATA APCI_1032 cards
 608
 609           To compile this driver as a module, choose M here: the module will be
 610           called addi_apci_1032.
 611
 612 config COMEDI_ADDI_APCI_1500
 613         tristate "ADDI-DATA APCI_1500 support"
 614         ---help---
 615           Enable support for ADDI-DATA APCI_1500 cards
 616
 617           To compile this driver as a module, choose M here: the module will be
 618           called addi_apci_1500.
 619
 620 config COMEDI_ADDI_APCI_1516
 621         tristate "ADDI-DATA APCI-1016/1516/2016 support"
 622         select COMEDI_ADDI_WATCHDOG
 623         ---help---
 624           Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
 625           These are 16 channel, optically isolated, digital I/O boards. The 1516
 626           and 2016 boards also have a watchdog for resetting the outputs to "0".
 627
 628           To compile this driver as a module, choose M here: the module will be
 629           called addi_apci_1516.
 630
 631 config COMEDI_ADDI_APCI_1564
 632         tristate "ADDI-DATA APCI_1564 support"
 633         select COMEDI_ADDI_WATCHDOG
 634         ---help---
 635           Enable support for ADDI-DATA APCI_1564 cards
 636
 637           To compile this driver as a module, choose M here: the module will be
 638           called addi_apci_1564.
 639
 640 config COMEDI_ADDI_APCI_16XX
 641         tristate "ADDI-DATA APCI_16xx support"
 642         ---help---
 643           Enable support for ADDI-DATA APCI_16xx cards
 644
 645           To compile this driver as a module, choose M here: the module will be
 646           called addi_apci_16xx.
 647
 648 config COMEDI_ADDI_APCI_2032
 649         tristate "ADDI-DATA APCI_2032 support"
 650         select COMEDI_ADDI_WATCHDOG
 651         ---help---
 652           Enable support for ADDI-DATA APCI_2032 cards
 653
 654           To compile this driver as a module, choose M here: the module will be
 655           called addi_apci_2032.
 656
 657 config COMEDI_ADDI_APCI_2200
 658         tristate "ADDI-DATA APCI_2200 support"
 659         select COMEDI_ADDI_WATCHDOG
 660         ---help---
 661           Enable support for ADDI-DATA APCI_2200 cards
 662
 663           To compile this driver as a module, choose M here: the module will be
 664           called addi_apci_2200.
 665
 666 config COMEDI_ADDI_APCI_3120
 667         tristate "ADDI-DATA APCI_3120/3001 support"
 668         depends on HAS_DMA
 669         ---help---
 670           Enable support for ADDI-DATA APCI_3120/3001 cards
 671
 672           To compile this driver as a module, choose M here: the module will be
 673           called addi_apci_3120.
 674
 675 config COMEDI_ADDI_APCI_3501
 676         tristate "ADDI-DATA APCI_3501 support"
 677         ---help---
 678           Enable support for ADDI-DATA APCI_3501 cards
 679
 680           To compile this driver as a module, choose M here: the module will be
 681           called addi_apci_3501.
 682
 683 config COMEDI_ADDI_APCI_3XXX
 684         tristate "ADDI-DATA APCI_3xxx support"
 685         ---help---
 686           Enable support for ADDI-DATA APCI_3xxx cards
 687
 688           To compile this driver as a module, choose M here: the module will be
 689           called addi_apci_3xxx.
 690
 691 config COMEDI_ADL_PCI6208
 692         tristate "ADLink PCI-6208A support"
 693         ---help---
 694           Enable support for ADLink PCI-6208A cards
 695
 696           To compile this driver as a module, choose M here: the module will be
 697           called adl_pci6208.
 698
 699 config COMEDI_ADL_PCI7X3X
 700         tristate "ADLink PCI-723X/743X isolated digital i/o board support"
 701         ---help---
 702           Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
 703           Supported boards include the 32-channel PCI-7230 (16 in/16 out),
 704           PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
 705           PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
 706
 707           To compile this driver as a module, choose M here: the module will be
 708           called adl_pci7x3x.
 709
 710 config COMEDI_ADL_PCI8164
 711         tristate "ADLink PCI-8164 4 Axes Motion Control board support"
 712         ---help---
 713           Enable support for ADlink PCI-8164 4 Axes Motion Control board
 714
 715           To compile this driver as a module, choose M here: the module will be
 716           called adl_pci8164.
 717
 718 config COMEDI_ADL_PCI9111
 719         tristate "ADLink PCI-9111HR support"
 720         select COMEDI_8254
 721         ---help---
 722           Enable support for ADlink PCI9111 cards
 723
 724           To compile this driver as a module, choose M here: the module will be
 725           called adl_pci9111.
 726
 727 config COMEDI_ADL_PCI9118
 728         tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 729         depends on HAS_DMA
 730         select COMEDI_8254
 731         ---help---
 732           Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
 733
 734           To compile this driver as a module, choose M here: the module will be
 735           called adl_pci9118.
 736
 737 config COMEDI_ADV_PCI1710
 738         tristate "Advantech PCI-171x and PCI-1731 support"
 739         select COMEDI_8254
 740         ---help---
 741           Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
 742           PCI-1713 and PCI-1731
 743
 744           To compile this driver as a module, choose M here: the module will be
 745           called adv_pci1710.
 746
 747 config COMEDI_ADV_PCI1720
 748         tristate "Advantech PCI-1720 support"
 749         ---help---
 750           Enable support for Advantech PCI-1720 Analog Output board.
 751
 752           To compile this driver as a module, choose M here: the module will be
 753           called adv_pci1720.
 754
 755 config COMEDI_ADV_PCI1723
 756         tristate "Advantech PCI-1723 support"
 757         ---help---
 758           Enable support for Advantech PCI-1723 cards
 759
 760           To compile this driver as a module, choose M here: the module will be
 761           called adv_pci1723.
 762
 763 config COMEDI_ADV_PCI1724
 764         tristate "Advantech PCI-1724U support"
 765         ---help---
 766           Enable support for Advantech PCI-1724U cards.  These are 32-channel
 767           analog output cards with voltage and current loop output ranges and
 768           14-bit resolution.
 769
 770           To compile this driver as a module, choose M here: the module will be
 771           called adv_pci1724.
 772
 773 config COMEDI_ADV_PCI1760
 774         tristate "Advantech PCI-1760 support"
 775         ---help---
 776           Enable support for Advantech PCI-1760 board.
 777
 778           To compile this driver as a module, choose M here: the module will be
 779           called adv_pci1760.
 780
 781 config COMEDI_ADV_PCI_DIO
 782         tristate "Advantech PCI DIO card support"
 783         select COMEDI_8254
 784         select COMEDI_8255
 785         ---help---
 786           Enable support for Advantech PCI DIO cards
 787           PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
 788           PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
 789           PCI-1761 and PCI-1762
 790
 791           To compile this driver as a module, choose M here: the module will be
 792           called adv_pci_dio.
 793
 794 config COMEDI_AMPLC_DIO200_PCI
 795         tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
 796         select COMEDI_AMPLC_DIO200
 797         ---help---
 798           Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
 799           and PCIe296 DIO boards.
 800
 801           To compile this driver as a module, choose M here: the module will be
 802           called amplc_dio200_pci.
 803
 804 config COMEDI_AMPLC_PC236_PCI
 805         tristate "Amplicon PCI236 DIO board support"
 806         select COMEDI_AMPLC_PC236
 807         ---help---
 808           Enable support for Amplicon PCI236 DIO board.
 809
 810           To compile this driver as a module, choose M here: the module will be
 811           called amplc_pci236.
 812
 813 config COMEDI_AMPLC_PC263_PCI
 814         tristate "Amplicon PCI263 relay board support"
 815         ---help---
 816           Enable support for Amplicon PCI263 relay board.  This is a PCI board
 817           with 16 reed relay output channels.
 818
 819           To compile this driver as a module, choose M here: the module will be
 820           called amplc_pci263.
 821
 822 config COMEDI_AMPLC_PCI224
 823         tristate "Amplicon PCI224 and PCI234 support"
 824         select COMEDI_8254
 825         ---help---
 826           Enable support for Amplicon PCI224 and PCI234 AO boards
 827
 828           To compile this driver as a module, choose M here: the module will be
 829           called amplc_pci224.
 830
 831 config COMEDI_AMPLC_PCI230
 832         tristate "Amplicon PCI230 and PCI260 support"
 833         select COMEDI_8254
 834         select COMEDI_8255
 835         ---help---
 836           Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
 837           boards
 838
 839           To compile this driver as a module, choose M here: the module will be
 840           called amplc_pci230.
 841
 842 config COMEDI_CONTEC_PCI_DIO
 843         tristate "Contec PIO1616L digital I/O board support"
 844         ---help---
 845           Enable support for the Contec PIO1616L digital I/O board
 846
 847           To compile this driver as a module, choose M here: the module will be
 848           called contec_pci_dio.
 849
 850 config COMEDI_DAS08_PCI
 851         tristate "DAS-08 PCI support"
 852         select COMEDI_DAS08
 853         ---help---
 854           Enable support for PCI DAS-08 cards.
 855
 856           To compile this driver as a module, choose M here: the module will be
 857           called das08_pci.
 858
 859 config COMEDI_DT3000
 860         tristate "Data Translation DT3000 series support"
 861         ---help---
 862           Enable support for Data Translation DT3000 series
 863           DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
 864           DT3004-200
 865
 866           To compile this driver as a module, choose M here: the module will be
 867           called dt3000.
 868
 869 config COMEDI_DYNA_PCI10XX
 870         tristate "Dynalog PCI DAQ series support"
 871         ---help---
 872           Enable support for Dynalog PCI DAQ series
 873           PCI-1050
 874
 875           To compile this driver as a module, choose M here: the module will be
 876           called dyna_pci10xx.
 877
 878 config COMEDI_GSC_HPDI
 879         tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
 880         ---help---
 881           Enable support for General Standards Corporation high speed parallel
 882           digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
 883           Only receive mode works, transmit not supported.
 884
 885           To compile this driver as a module, choose M here: the module will be
 886           called gsc_hpdi.
 887
 888 config COMEDI_MF6X4
 889         tristate "Humusoft MF634 and MF624 DAQ Card support"
 890         ---help---
 891           This driver supports both Humusoft MF634 and MF624 Data acquisition
 892           cards. The legacy Humusoft MF614 card is not supported.
 893
 894 config COMEDI_ICP_MULTI
 895         tristate "Inova ICP_MULTI support"
 896         ---help---
 897           Enable support for Inova ICP_MULTI card
 898
 899           To compile this driver as a module, choose M here: the module will be
 900           called icp_multi.
 901
 902 config COMEDI_DAQBOARD2000
 903         tristate "IOtech DAQboard/2000 support"
 904         select COMEDI_8255
 905         ---help---
 906           Enable support for the IOtech DAQboard/2000
 907
 908           To compile this driver as a module, choose M here: the module will be
 909           called daqboard2000.
 910
 911 config COMEDI_JR3_PCI
 912         tristate "JR3/PCI force sensor board support"
 913         ---help---
 914           Enable support for JR3/PCI force sensor boards
 915
 916           To compile this driver as a module, choose M here: the module will be
 917           called jr3_pci.
 918
 919 config COMEDI_KE_COUNTER
 920         tristate "Kolter-Electronic PCI Counter 1 card support"
 921         ---help---
 922           Enable support for Kolter-Electronic PCI Counter 1 cards
 923
 924           To compile this driver as a module, choose M here: the module will be
 925           called ke_counter.
 926
 927 config COMEDI_CB_PCIDAS64
 928         tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
 929         select COMEDI_8255
 930         ---help---
 931           Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
 932           60xx, and 4020 series with the PLX 9080 PCI controller
 933
 934           To compile this driver as a module, choose M here: the module will be
 935           called cb_pcidas64.
 936
 937 config COMEDI_CB_PCIDAS
 938         tristate "MeasurementComputing PCI-DAS support"
 939         select COMEDI_8254
 940         select COMEDI_8255
 941         ---help---
 942           Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
 943           AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
 944           PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
 945           and PCI_DAS1002.
 946
 947           To compile this driver as a module, choose M here: the module will be
 948           called cb_pcidas.
 949
 950 config COMEDI_CB_PCIDDA
 951         tristate "MeasurementComputing PCI-DDA series support"
 952         select COMEDI_8255
 953         ---help---
 954           Enable support for ComputerBoards/MeasurementComputing PCI-DDA
 955           series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
 956           PCI-DDA04/16 and PCI-DDA02/16
 957
 958           To compile this driver as a module, choose M here: the module will be
 959           called cb_pcidda.
 960
 961 config COMEDI_CB_PCIMDAS
 962         tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
 963         select COMEDI_8254
 964         select COMEDI_8255
 965         ---help---
 966           Enable support for ComputerBoards/MeasurementComputing PCI Migration
 967           series PCIM-DAS1602/16 and PCIe-DAS1602/16.
 968
 969           To compile this driver as a module, choose M here: the module will be
 970           called cb_pcimdas.
 971
 972 config COMEDI_CB_PCIMDDA
 973         tristate "MeasurementComputing PCIM-DDA06-16 support"
 974         select COMEDI_8255
 975         ---help---
 976           Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
 977
 978           To compile this driver as a module, choose M here: the module will be
 979           called cb_pcimdda.
 980
 981 config COMEDI_ME4000
 982         tristate "Meilhaus ME-4000 support"
 983         select COMEDI_8254
 984         ---help---
 985           Enable support for Meilhaus PCI data acquisition cards
 986           ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
 987
 988           To compile this driver as a module, choose M here: the module will be
 989           called me4000.
 990
 991 config COMEDI_ME_DAQ
 992         tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
 993         ---help---
 994           Enable support for Meilhaus PCI data acquisition cards
 995           ME-2000i, ME-2600i and ME-3000vm1
 996
 997           To compile this driver as a module, choose M here: the module will be
 998           called me_daq.
 999
1000 config COMEDI_NI_6527
1001         tristate "NI 6527 support"
1002         ---help---
1003           Enable support for the National Instruments 6527 PCI card
1004
1005           To compile this driver as a module, choose M here: the module will be
1006           called ni_6527.
1007
1008 config COMEDI_NI_65XX
1009         tristate "NI 65xx static dio PCI card support"
1010         ---help---
1011           Enable support for National Instruments 65xx static dio boards.
1012           Supported devices: National Instruments PCI-6509 (ni_65xx),
1013           PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1014           PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1015           PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1016
1017           To compile this driver as a module, choose M here: the module will be
1018           called ni_65xx.
1019
1020 config COMEDI_NI_660X
1021         tristate "NI 660x counter/timer PCI card support"
1022         depends on HAS_DMA
1023         select COMEDI_NI_TIOCMD
1024         ---help---
1025           Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1026           PXI-6602, PXI-6608, PCI-6624, and PXI-6624.
1027
1028           To compile this driver as a module, choose M here: the module will be
1029           called ni_660x.
1030
1031 config COMEDI_NI_670X
1032         tristate "NI 670x PCI card support"
1033         ---help---
1034           Enable support for National Instruments PCI-6703 and PCI-6704
1035
1036           To compile this driver as a module, choose M here: the module will be
1037           called ni_670x.
1038
1039 config COMEDI_NI_LABPC_PCI
1040         tristate "NI Lab-PC PCI-1200 support"
1041         select COMEDI_NI_LABPC
1042         ---help---
1043           Enable support for National Instruments Lab-PC PCI-1200.
1044
1045           To compile this driver as a module, choose M here: the module will be
1046           called ni_labpc_pci.
1047
1048 config COMEDI_NI_PCIDIO
1049         tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1050         depends on HAS_DMA
1051         select COMEDI_MITE
1052         select COMEDI_8255
1053         ---help---
1054           Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1055           PCI-6533 and PCI-6534
1056
1057           To compile this driver as a module, choose M here: the module will be
1058           called ni_pcidio.
1059
1060 config COMEDI_NI_PCIMIO
1061         tristate "NI PCI-MIO-E series and M series support"
1062         depends on HAS_DMA
1063         select COMEDI_NI_TIOCMD
1064         select COMEDI_8255
1065         ---help---
1066           Enable support for National Instruments PCI-MIO-E series and M series
1067           (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1068           PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1069           PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1070           PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1071           PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225,
1072           PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251,
1073           PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259,
1074           PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281,
1075           PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711,
1076           PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1077           PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1078
1079           To compile this driver as a module, choose M here: the module will be
1080           called ni_pcimio.
1081
1082 config COMEDI_RTD520
1083         tristate "Real Time Devices PCI4520/DM7520 support"
1084         select COMEDI_8254
1085         ---help---
1086           Enable support for Real Time Devices PCI4520/DM7520
1087
1088           To compile this driver as a module, choose M here: the module will be
1089           called rtd520.
1090
1091 config COMEDI_S626
1092         tristate "Sensoray 626 support"
1093         ---help---
1094           Enable support for Sensoray 626
1095
1096           To compile this driver as a module, choose M here: the module will be
1097           called s626.
1098
1099 config COMEDI_MITE
1100         depends on HAS_DMA
1101         tristate
1102
1103 config COMEDI_NI_TIOCMD
1104         tristate
1105         depends on HAS_DMA
1106         select COMEDI_NI_TIO
1107         select COMEDI_MITE
1108
1109 endif # COMEDI_PCI_DRIVERS
1110
1111 menuconfig COMEDI_PCMCIA_DRIVERS
1112         tristate "Comedi PCMCIA drivers"
1113         depends on PCMCIA
1114         ---help---
1115           Enable support for comedi PCMCIA drivers.
1116
1117           To compile this support as a module, choose M here: the module will
1118           be called comedi_pcmcia.
1119
1120 if COMEDI_PCMCIA_DRIVERS
1121
1122 config COMEDI_CB_DAS16_CS
1123         tristate "CB DAS16 series PCMCIA support"
1124         select COMEDI_8254
1125         ---help---
1126           Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1127           cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1128
1129           To compile this driver as a module, choose M here: the module will be
1130           called cb_das16_cs.
1131
1132 config COMEDI_DAS08_CS
1133         tristate "CB DAS08 PCMCIA support"
1134         select COMEDI_DAS08
1135         ---help---
1136           Enable support for the ComputerBoards/MeasurementComputing DAS-08
1137           PCMCIA card
1138
1139           To compile this driver as a module, choose M here: the module will be
1140           called das08_cs.
1141
1142 config COMEDI_NI_DAQ_700_CS
1143         tristate "NI DAQCard-700 PCMCIA support"
1144         ---help---
1145           Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1146
1147           To compile this driver as a module, choose M here: the module will be
1148           called ni_daq_700.
1149
1150 config COMEDI_NI_DAQ_DIO24_CS
1151         tristate "NI DAQ-Card DIO-24 PCMCIA support"
1152         select COMEDI_8255
1153         ---help---
1154           Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1155
1156           To compile this driver as a module, choose M here: the module will be
1157           called ni_daq_dio24.
1158
1159 config COMEDI_NI_LABPC_CS
1160         tristate "NI DAQCard-1200 PCMCIA support"
1161         select COMEDI_NI_LABPC
1162         ---help---
1163           Enable support for the National Instruments PCMCIA DAQCard-1200
1164
1165           To compile this driver as a module, choose M here: the module will be
1166           called ni_labpc_cs.
1167
1168 config COMEDI_NI_MIO_CS
1169         tristate "NI DAQCard E series PCMCIA support"
1170         select COMEDI_NI_TIO
1171         select COMEDI_8255
1172         ---help---
1173           Enable support for the National Instruments PCMCIA DAQCard E series
1174           DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1175           and DAQCard-6036E
1176
1177           To compile this driver as a module, choose M here: the module will be
1178           called ni_mio_cs.
1179
1180 config COMEDI_QUATECH_DAQP_CS
1181         tristate "Quatech DAQP PCMCIA data capture card support"
1182         ---help---
1183           Enable support for the Quatech DAQP PCMCIA data capture cards
1184           DAQP-208 and DAQP-308
1185
1186           To compile this driver as a module, choose M here: the module will be
1187           called quatech_daqp_cs.
1188
1189 endif # COMEDI_PCMCIA_DRIVERS
1190
1191 menuconfig COMEDI_USB_DRIVERS
1192         tristate "Comedi USB drivers"
1193         depends on USB
1194         ---help---
1195           Enable support for comedi USB drivers.
1196
1197           To compile this support as a module, choose M here: the module will
1198           be called comedi_usb.
1199
1200 if COMEDI_USB_DRIVERS
1201
1202 config COMEDI_DT9812
1203         tristate "DataTranslation DT9812 USB module support"
1204         ---help---
1205           Enable support for the Data Translation DT9812 USB module
1206
1207           To compile this driver as a module, choose M here: the module will be
1208           called dt9812.
1209
1210 config COMEDI_NI_USB6501
1211         tristate "NI USB-6501 support"
1212         ---help---
1213           Enable support for the National Instruments USB-6501 module.
1214
1215           The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1216           provides 24 digital I/O lines channels and one 32-bit counter.
1217
1218           To compile this driver as a module, choose M here: the module will be
1219           called ni_usb6501.
1220
1221 config COMEDI_USBDUX
1222         tristate "ITL USB-DUX-D support"
1223         ---help---
1224           Enable support for the Incite Technology Ltd USB-DUX-D Board
1225
1226           To compile this driver as a module, choose M here: the module will be
1227           called usbdux.
1228
1229 config COMEDI_USBDUXFAST
1230         tristate "ITL USB-DUXfast support"
1231         ---help---
1232           Enable support for the Incite Technology Ltd USB-DUXfast Board
1233
1234           To compile this driver as a module, choose M here: the module will be
1235           called usbduxfast.
1236
1237 config COMEDI_USBDUXSIGMA
1238         tristate "ITL USB-DUXsigma support"
1239         ---help---
1240           Enable support for the Incite Technology Ltd USB-DUXsigma Board
1241
1242           To compile this driver as a module, choose M here: the module will be
1243           called usbduxsigma.
1244
1245 config COMEDI_VMK80XX
1246         tristate "Velleman VM110/VM140 USB Board support"
1247         ---help---
1248           Build the Velleman USB Board Low-Level Driver supporting the
1249           K8055/K8061 aka VM110/VM140 devices
1250
1251           To compile this driver as a module, choose M here: the module will be
1252           called vmk80xx.
1253
1254 endif # COMEDI_USB_DRIVERS
1255
1256 config COMEDI_8254
1257         tristate
1258
1259 config COMEDI_8255
1260         tristate
1261
1262 config COMEDI_8255_SA
1263         tristate "Standalone 8255 support"
1264         select COMEDI_8255
1265         ---help---
1266           Enable support for 8255 digital I/O as a standalone driver.
1267
1268           You should enable compilation this driver if you plan to use a board
1269           that has an 8255 chip at a known I/O base address and there are no
1270           other Comedi drivers for the board.
1271
1272           Note that Comedi drivers for most multi-function boards incorporating
1273           an 8255 chip use the 'comedi_8255' module.  Most PCI-based 8255
1274           boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
1275           module.
1276
1277           To compile this driver as a module, choose M here: the module will be
1278           called 8255.
1279
1280 config COMEDI_KCOMEDILIB
1281         tristate "Comedi kcomedilib"
1282         ---help---
1283           Build the kcomedilib.
1284
1285           This is a kernel module used to open and manipulate Comedi devices
1286           from within kernel code.  It is currently only used by the
1287           comedi_bond driver, and its functionality has been stripped down to
1288           the needs of that driver, so is currently not very useful for
1289           anything else.
1290
1291           To compile kcomedilib as a module, choose M here: the module will be
1292           called kcomedilib.
1293
1294 config COMEDI_AMPLC_DIO200
1295         select COMEDI_8254
1296         tristate
1297
1298 config COMEDI_AMPLC_PC236
1299         tristate
1300         select COMEDI_8255
1301
1302 config COMEDI_DAS08
1303         tristate
1304         select COMEDI_8254
1305         select COMEDI_8255
1306
1307 config COMEDI_ISADMA
1308         tristate
1309
1310 config COMEDI_NI_LABPC
1311         tristate
1312         select COMEDI_8254
1313         select COMEDI_8255
1314
1315 config COMEDI_NI_LABPC_ISADMA
1316         tristate
1317         default COMEDI_NI_LABPC
1318         depends on COMEDI_NI_LABPC_ISA != n
1319         depends on ISA_DMA_API
1320         select COMEDI_ISADMA
1321
1322 config COMEDI_NI_TIO
1323         tristate
1324
1325 endif # COMEDI