drivers/staging/comedi/Kconfig

   1 config COMEDI
   2         tristate "Data acquisition support (comedi)"
   3         depends on m
   4         ---help---
   5           Enable support for a wide range of data acquisition devices
   6           for Linux.
   7
   8 if COMEDI
   9
  10 config COMEDI_DEBUG
  11         bool "Comedi debugging"
  12         ---help---
  13           This is an option for use by developers; most people should
  14           say N here. This enables comedi core and driver debugging.
  15
  16 config COMEDI_DEFAULT_BUF_SIZE_KB
  17         int "Comedi default initial asynchronous buffer size in KiB"
  18         default "2048"
  19         ---help---
  20           This is the default asynchronous buffer size which is used for
  21           commands running in the background in kernel space.  This
  22           defaults to 2048 KiB of memory so that a 16 channel card
  23           running at 10 kHz has of 2-4 seconds of buffer.
  24
  25 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
  26         int "Comedi default maximum asynchronous buffer size in KiB"
  27         default "20480"
  28         ---help---
  29           This is the default maximum asynchronous buffer size which can
  30           be requested by a userspace program without root privileges.
  31           This is set to 20480 KiB so that a fast I/O card with 16
  32           channels running at 100 kHz has 2-4 seconds of buffer.
  33
  34 menuconfig COMEDI_MISC_DRIVERS
  35         bool "Comedi misc drivers"
  36         ---help---
  37           Enable comedi misc drivers to be built
  38
  39           Note that the answer to this question won't directly affect the
  40           kernel: saying N will just cause the configurator to skip all
  41           the questions about misc non-hardware comedi drivers.
  42
  43 if COMEDI_MISC_DRIVERS
  44
  45 config COMEDI_BOND
  46         tristate "Comedi device bonding support"
  47         select COMEDI_KCOMEDILIB
  48         ---help---
  49           Enable support for a driver to 'bond' (merge) multiple subdevices
  50           from multiple devices together as one.
  51
  52           Currently, it only handles digital I/O subdevices.
  53
  54           To compile this driver as a module, choose M here: the module will be
  55           called comedi_bond.
  56
  57 config COMEDI_TEST
  58         tristate "Fake waveform generator support"
  59         ---help---
  60           Enable support for the fake waveform generator.
  61           This driver is mainly for testing purposes, but can also be used to
  62           generate sample waveforms on systems that don't have data acquisition
  63           hardware.
  64
  65           To compile this driver as a module, choose M here: the module will be
  66           called comedi_test.
  67
  68 config COMEDI_PARPORT
  69         tristate "Parallel port support"
  70         ---help---
  71           Enable support for the standard parallel port.
  72           A cheap and easy way to get a few more digital I/O lines. Steal
  73           additional parallel ports from old computers or your neighbors'
  74           computers.
  75
  76           To compile this driver as a module, choose M here: the module will be
  77           called comedi_parport.
  78
  79 config COMEDI_SERIAL2002
  80         tristate "Driver for serial connected hardware"
  81         ---help---
  82           Enable support for serial connected hardware
  83
  84           To compile this driver as a module, choose M here: the module will be
  85           called serial2002.
  86
  87 config COMEDI_SSV_DNP
  88         tristate "SSV Embedded Systems DIL/Net-PC support"
  89         depends on X86_32 || COMPILE_TEST
  90         ---help---
  91           Enable support for SSV Embedded Systems DIL/Net-PC
  92
  93           To compile this driver as a module, choose M here: the module will be
  94           called ssv_dnp.
  95
  96 endif # COMEDI_MISC_DRIVERS
  97
  98 menuconfig COMEDI_ISA_DRIVERS
  99         bool "Comedi ISA and PC/104 drivers"
 100         ---help---
 101           Enable comedi ISA and PC/104 drivers to be built
 102
 103           Note that the answer to this question won't directly affect the
 104           kernel: saying N will just cause the configurator to skip all
 105           the questions about ISA and PC/104 comedi drivers.
 106
 107 if COMEDI_ISA_DRIVERS
 108
 109 config COMEDI_PCL711
 110         tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
 111         select COMEDI_8254
 112         ---help---
 113           Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
 114
 115           To compile this driver as a module, choose M here: the module will be
 116           called pcl711.
 117
 118 config COMEDI_PCL724
 119         tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
 120         select COMEDI_8255
 121         ---help---
 122           Enable support for ISA and PC/104 based 8255 digital i/o boards. This
 123           driver provides a legacy comedi driver wrapper for the generic 8255
 124           support driver.
 125
 126           Supported boards include:
 127             Advantech PCL-724            24 channels
 128             Advantech PCL-722            144 (or 96) channels
 129             Advantech PCL-731            48 channels
 130             ADlink ACL-7122              144 (or 96) channels
 131             ADlink ACL-7124              24 channels
 132             ADlink PET-48DIO             48 channels
 133             WinSystems PCM-IO48          48 channels (PC/104)
 134             Diamond Systems ONYX-MM-DIO  48 channels (PC/104)
 135
 136           To compile this driver as a module, choose M here: the module will be
 137           called pcl724.
 138
 139 config COMEDI_PCL726
 140         tristate "Advantech PCL-726 and compatible ISA card support"
 141         ---help---
 142           Enable support for Advantech PCL-726 and compatible ISA cards.
 143
 144           To compile this driver as a module, choose M here: the module will be
 145           called pcl726.
 146
 147 config COMEDI_PCL730
 148         tristate "Simple Digital I/O board support (8-bit ports)"
 149         ---help---
 150           Enable support for various simple ISA or PC/104 Digital I/O boards.
 151           These boards all use 8-bit I/O ports.
 152
 153           Advantech PCL-730             iso - 16 in/16 out  ttl - 16 in/16 out
 154           ICP ISO-730                   iso - 16 in/16 out  ttl - 16 in/16 out
 155           ADlink ACL-7130               iso - 16 in/16 out  ttl - 16 in/16 out
 156           Advantech PCM-3730            iso - 8 in/8 out    ttl - 16 in/16 out
 157           Advantech PCL-725             iso - 8 in/8 out
 158           ICP P8R8-DIO                  iso - 8 in/8 out
 159           ADlink ACL-7225b              iso - 16 in/16 out
 160           ICP P16R16-DIO                iso - 16 in/16 out
 161           Advantech PCL-733             iso - 32 in
 162           Advantech PCL-734             iso - 32 out
 163           Diamond Systems OPMM-1616-XT  iso - 16 in/16 out
 164           Diamond Systems PEARL-MM-P    iso - 16 out
 165           Diamond Systems IR104-PBF     iso - 20 in/20 out
 166
 167           To compile this driver as a module, choose M here: the module will be
 168           called pcl730.
 169
 170 config COMEDI_PCL812
 171         tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
 172         select COMEDI_ISADMA if ISA_DMA_API
 173         select COMEDI_8254
 174         ---help---
 175           Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
 176           ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
 177           A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
 178
 179           To compile this driver as a module, choose M here: the module will be
 180           called pcl812.
 181
 182 config COMEDI_PCL816
 183         tristate "Advantech PCL-814 and PCL-816 ISA card support"
 184         select COMEDI_ISADMA if ISA_DMA_API
 185         select COMEDI_8254
 186         ---help---
 187           Enable support for Advantech PCL-814 and PCL-816 ISA cards
 188
 189           To compile this driver as a module, choose M here: the module will be
 190           called pcl816.
 191
 192 config COMEDI_PCL818
 193         tristate "Advantech PCL-718 and PCL-818 ISA card support"
 194         select COMEDI_ISADMA if ISA_DMA_API
 195         select COMEDI_8254
 196         ---help---
 197           Enable support for Advantech PCL-818 ISA cards
 198           PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
 199
 200           To compile this driver as a module, choose M here: the module will be
 201           called pcl818.
 202
 203 config COMEDI_PCM3724
 204         tristate "Advantech PCM-3724 PC/104 card support"
 205         select COMEDI_8255
 206         ---help---
 207           Enable support for Advantech PCM-3724 PC/104 cards.
 208
 209           To compile this driver as a module, choose M here: the module will be
 210           called pcm3724.
 211
 212 config COMEDI_AMPLC_DIO200_ISA
 213         tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
 214         select COMEDI_AMPLC_DIO200
 215         ---help---
 216           Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
 217           PC272E ISA DIO boards
 218
 219           To compile this driver as a module, choose M here: the module will be
 220           called amplc_dio200.
 221
 222 config COMEDI_AMPLC_PC236_ISA
 223         tristate "Amplicon PC36AT DIO board support"
 224         select COMEDI_AMPLC_PC236
 225         ---help---
 226           Enable support for Amplicon PC36AT ISA DIO board.
 227
 228           To compile this driver as a module, choose M here: the module will be
 229           called amplc_pc236.
 230
 231 config COMEDI_AMPLC_PC263_ISA
 232         tristate "Amplicon PC263 relay board support"
 233         ---help---
 234           Enable support for Amplicon PC263 ISA relay board.  This board has
 235           16 reed relay output channels.
 236
 237           To compile this driver as a module, choose M here: the module will be
 238           called amplc_pc263.
 239
 240 config COMEDI_RTI800
 241         tristate "Analog Devices RTI-800/815 ISA card support"
 242         ---help---
 243           Enable support for Analog Devices RTI-800/815 ISA cards
 244
 245           To compile this driver as a module, choose M here: the module will be
 246           called rti800.
 247
 248 config COMEDI_RTI802
 249         tristate "Analog Devices RTI-802 ISA card support"
 250         ---help---
 251           Enable support for Analog Devices RTI-802 ISA cards
 252
 253           To compile this driver as a module, choose M here: the module will be
 254           called rti802.
 255
 256 config COMEDI_DAC02
 257         tristate "Keithley Metrabyte DAC02 compatible ISA card support"
 258         ---help---
 259           Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
 260
 261           To compile this driver as a module, choose M here: the module will be
 262           called dac02.
 263
 264 config COMEDI_DAS16M1
 265         tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
 266         select COMEDI_8254
 267         select COMEDI_8255
 268         ---help---
 269           Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
 270
 271           To compile this driver as a module, choose M here: the module will be
 272           called das16m1.
 273
 274 config COMEDI_DAS08_ISA
 275         tristate "DAS-08 compatible ISA and PC/104 card support"
 276         select COMEDI_DAS08
 277         ---help---
 278           Enable support for Keithley Metrabyte/ComputerBoards DAS08
 279           and compatible ISA and PC/104 cards:
 280           Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
 281           DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
 282           DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
 283
 284           To compile this driver as a module, choose M here: the module will be
 285           called das08_isa.
 286
 287 config COMEDI_DAS16
 288         tristate "DAS-16 compatible ISA and PC/104 card support"
 289         select COMEDI_ISADMA if ISA_DMA_API
 290         select COMEDI_8254
 291         select COMEDI_8255
 292         ---help---
 293           Enable support for Keithley Metrabyte/ComputerBoards DAS16
 294           and compatible ISA and PC/104 cards:
 295           Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
 296           DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
 297           ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
 298           PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
 299           CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
 300           CIO-DAS1602/16, CIO-DAS16/330
 301
 302           To compile this driver as a module, choose M here: the module will be
 303           called das16.
 304
 305 config COMEDI_DAS800
 306         tristate "DAS800 and compatible ISA card support"
 307         select COMEDI_8254
 308         ---help---
 309           Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
 310           Keithley Metrabyte DAS-800, DAS-801, DAS-802
 311           Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
 312           CIO-DAS802/16
 313
 314           To compile this driver as a module, choose M here: the module will be
 315           called das800.
 316
 317 config COMEDI_DAS1800
 318         tristate "DAS1800 and compatible ISA card support"
 319         select COMEDI_ISADMA if ISA_DMA_API
 320         select COMEDI_8254
 321         ---help---
 322           Enable support for DAS1800 and compatible ISA cards
 323           Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
 324           DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
 325           DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
 326           DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
 327           DAS-1802AO
 328
 329           To compile this driver as a module, choose M here: the module will be
 330           called das1800.
 331
 332 config COMEDI_DAS6402
 333         tristate "DAS6402 and compatible ISA card support"
 334         select COMEDI_8254
 335         ---help---
 336           Enable support for DAS6402 and compatible ISA cards
 337           Computerboards, Keithley Metrabyte DAS6402 and compatibles
 338
 339           To compile this driver as a module, choose M here: the module will be
 340           called das6402.
 341
 342 config COMEDI_DT2801
 343         tristate "Data Translation DT2801 ISA card support"
 344         ---help---
 345           Enable support for Data Translation DT2801 ISA cards
 346
 347           To compile this driver as a module, choose M here: the module will be
 348           called dt2801.
 349
 350 config COMEDI_DT2811
 351         tristate "Data Translation DT2811 ISA card support"
 352         ---help---
 353           Enable support for Data Translation DT2811 ISA cards
 354
 355           To compile this driver as a module, choose M here: the module will be
 356           called dt2811.
 357
 358 config COMEDI_DT2814
 359         tristate "Data Translation DT2814 ISA card support"
 360         ---help---
 361           Enable support for Data Translation DT2814 ISA cards
 362
 363           To compile this driver as a module, choose M here: the module will be
 364           called dt2814.
 365
 366 config COMEDI_DT2815
 367         tristate "Data Translation DT2815 ISA card support"
 368         ---help---
 369           Enable support for Data Translation DT2815 ISA cards
 370
 371           To compile this driver as a module, choose M here: the module will be
 372           called dt2815.
 373
 374 config COMEDI_DT2817
 375         tristate "Data Translation DT2817 ISA card support"
 376         ---help---
 377           Enable support for Data Translation DT2817 ISA cards
 378
 379           To compile this driver as a module, choose M here: the module will be
 380           called dt2817.
 381
 382 config COMEDI_DT282X
 383         tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 384         select COMEDI_ISADMA if ISA_DMA_API
 385         ---help---
 386           Enable support for Data Translation DT2821 series including DT-EZ
 387           DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
 388           DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
 389           DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
 390
 391           To compile this driver as a module, choose M here: the module will be
 392           called dt282x.
 393
 394 config COMEDI_DMM32AT
 395         tristate "Diamond Systems MM-32-AT PC/104 board support"
 396         select COMEDI_8255
 397         ---help---
 398           Enable support for Diamond Systems MM-32-AT PC/104 boards
 399
 400           To compile this driver as a module, choose M here: the module will be
 401           called dmm32at.
 402
 403 config COMEDI_FL512
 404         tristate "FL512 ISA card support"
 405         ---help---
 406           Enable support for FL512 ISA card
 407
 408           To compile this driver as a module, choose M here: the module will be
 409           called fl512.
 410
 411 config COMEDI_AIO_AIO12_8
 412         tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
 413         select COMEDI_8254
 414         select COMEDI_8255
 415         ---help---
 416           Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
 417
 418           To compile this driver as a module, choose M here: the module will be
 419           called aio_aio12_8.
 420
 421 config COMEDI_AIO_IIRO_16
 422         tristate "I/O Products PC/104 IIRO16 Board support"
 423         ---help---
 424           Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
 425           Input Board
 426
 427           To compile this driver as a module, choose M here: the module will be
 428           called aio_iiro_16.
 429
 430 config COMEDI_II_PCI20KC
 431         tristate "Intelligent Instruments PCI-20001C carrier support"
 432         depends on HAS_IOMEM
 433         ---help---
 434           Enable support for Intelligent Instruments PCI-20001C carrier
 435           PCI-20001, PCI-20006 and PCI-20341
 436
 437           To compile this driver as a module, choose M here: the module will be
 438           called ii_pci20kc.
 439
 440 config COMEDI_C6XDIGIO
 441         tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
 442         ---help---
 443           Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
 444           card
 445
 446           To compile this driver as a module, choose M here: the module will be
 447           called c6xdigio.
 448
 449 config COMEDI_MPC624
 450         tristate "Micro/sys MPC-624 PC/104 board support"
 451         ---help---
 452           Enable support for Micro/sys MPC-624 PC/104 board
 453
 454           To compile this driver as a module, choose M here: the module will be
 455           called mpc624.
 456
 457 config COMEDI_ADQ12B
 458         tristate "MicroAxial ADQ12-B data acquisition and control card support"
 459         ---help---
 460           Enable MicroAxial ADQ12-B daq and control card support.
 461
 462           To compile this driver as a module, choose M here: the module will be
 463           called adq12b.
 464
 465 config COMEDI_NI_AT_A2150
 466         tristate "NI AT-A2150 ISA card support"
 467         select COMEDI_ISADMA if ISA_DMA_API
 468         select COMEDI_8254
 469         ---help---
 470           Enable support for National Instruments AT-A2150 cards
 471
 472           To compile this driver as a module, choose M here: the module will be
 473           called ni_at_a2150.
 474
 475 config COMEDI_NI_AT_AO
 476         tristate "NI AT-AO-6/10 EISA card support"
 477         select COMEDI_8254
 478         ---help---
 479           Enable support for National Instruments AT-AO-6/10 cards
 480
 481           To compile this driver as a module, choose M here: the module will be
 482           called ni_at_ao.
 483
 484 config COMEDI_NI_ATMIO
 485         tristate "NI AT-MIO E series ISA-PNP card support"
 486         select COMEDI_8255
 487         select COMEDI_NI_TIO
 488         ---help---
 489           Enable support for National Instruments AT-MIO E series cards
 490           National Instruments AT-MIO-16E-1 (ni_atmio),
 491           AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
 492           AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
 493
 494           To compile this driver as a module, choose M here: the module will be
 495           called ni_atmio.
 496
 497 config COMEDI_NI_ATMIO16D
 498         tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
 499         select COMEDI_8255
 500         ---help---
 501           Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
 502
 503           To compile this driver as a module, choose M here: the module will be
 504           called ni_atmio16d.
 505
 506 config COMEDI_NI_LABPC_ISA
 507         tristate "NI Lab-PC and compatibles ISA support"
 508         select COMEDI_NI_LABPC
 509         select COMEDI_NI_LABPC_ISADMA if ISA_DMA_API
 510         ---help---
 511           Enable support for National Instruments Lab-PC and compatibles
 512           Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
 513           Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
 514           not yet been added to the driver.
 515
 516           To compile this driver as a module, choose M here: the module will be
 517           called ni_labpc.
 518
 519 config COMEDI_PCMAD
 520         tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
 521         ---help---
 522           Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
 523
 524           To compile this driver as a module, choose M here: the module will be
 525           called pcmad.
 526
 527 config COMEDI_PCMDA12
 528         tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
 529         ---help---
 530           Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
 531           Note that the board is not ISA-PNP capable and thus needs the I/O
 532           port comedi_config parameter.
 533
 534           To compile this driver as a module, choose M here: the module will be
 535           called pcmda12.
 536
 537 config COMEDI_PCMMIO
 538         tristate "Winsystems PCM-MIO PC/104 board support"
 539         ---help---
 540           Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
 541
 542           To compile this driver as a module, choose M here: the module will be
 543           called pcmmio.
 544
 545 config COMEDI_PCMUIO
 546         tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
 547         ---help---
 548           Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
 549
 550           To compile this driver as a module, choose M here: the module will be
 551           called pcmuio.
 552
 553 config COMEDI_MULTIQ3
 554         tristate "Quanser Consulting MultiQ-3 ISA card support"
 555         ---help---
 556           Enable support for Quanser Consulting MultiQ-3 ISA cards
 557
 558           To compile this driver as a module, choose M here: the module will be
 559           called multiq3.
 560
 561 config COMEDI_S526
 562         tristate "Sensoray s526 support"
 563         ---help---
 564           Enable support for Sensoray s526
 565
 566           To compile this driver as a module, choose M here: the module will be
 567           called s526.
 568
 569 endif # COMEDI_ISA_DRIVERS
 570
 571 menuconfig COMEDI_PCI_DRIVERS
 572         tristate "Comedi PCI drivers"
 573         depends on PCI
 574         ---help---
 575           Enable support for comedi PCI drivers.
 576
 577           To compile this support as a module, choose M here: the module will
 578           be called comedi_pci.
 579
 580 if COMEDI_PCI_DRIVERS
 581
 582 config COMEDI_8255_PCI
 583         tristate "Generic PCI based 8255 digital i/o board support"
 584         select COMEDI_8255
 585         ---help---
 586           Enable support for PCI based 8255 digital i/o boards. This driver
 587           provides a PCI wrapper around the generic 8255 driver.
 588
 589           Supported boards:
 590             ADlink - PCI-7224, PCI-7248, and PCI-7296
 591             Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
 592                                     PCI-DIO96H
 593             National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
 594                                    PCI-6503B, PCI-6503X, and PXI-6503
 595
 596           To compile this driver as a module, choose M here: the module will
 597           be called 8255_pci.
 598
 599 config COMEDI_ADDI_WATCHDOG
 600         tristate
 601         ---help---
 602           Provides support for the watchdog subdevice found on many ADDI-DATA
 603           boards. This module will be automatically selected when needed. The
 604           module will be called addi_watchdog.
 605
 606 config COMEDI_ADDI_APCI_1032
 607         tristate "ADDI-DATA APCI_1032 support"
 608         ---help---
 609           Enable support for ADDI-DATA APCI_1032 cards
 610
 611           To compile this driver as a module, choose M here: the module will be
 612           called addi_apci_1032.
 613
 614 config COMEDI_ADDI_APCI_1500
 615         tristate "ADDI-DATA APCI_1500 support"
 616         ---help---
 617           Enable support for ADDI-DATA APCI_1500 cards
 618
 619           To compile this driver as a module, choose M here: the module will be
 620           called addi_apci_1500.
 621
 622 config COMEDI_ADDI_APCI_1516
 623         tristate "ADDI-DATA APCI-1016/1516/2016 support"
 624         select COMEDI_ADDI_WATCHDOG
 625         ---help---
 626           Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
 627           These are 16 channel, optically isolated, digital I/O boards. The 1516
 628           and 2016 boards also have a watchdog for resetting the outputs to "0".
 629
 630           To compile this driver as a module, choose M here: the module will be
 631           called addi_apci_1516.
 632
 633 config COMEDI_ADDI_APCI_1564
 634         tristate "ADDI-DATA APCI_1564 support"
 635         select COMEDI_ADDI_WATCHDOG
 636         ---help---
 637           Enable support for ADDI-DATA APCI_1564 cards
 638
 639           To compile this driver as a module, choose M here: the module will be
 640           called addi_apci_1564.
 641
 642 config COMEDI_ADDI_APCI_16XX
 643         tristate "ADDI-DATA APCI_16xx support"
 644         ---help---
 645           Enable support for ADDI-DATA APCI_16xx cards
 646
 647           To compile this driver as a module, choose M here: the module will be
 648           called addi_apci_16xx.
 649
 650 config COMEDI_ADDI_APCI_2032
 651         tristate "ADDI-DATA APCI_2032 support"
 652         select COMEDI_ADDI_WATCHDOG
 653         ---help---
 654           Enable support for ADDI-DATA APCI_2032 cards
 655
 656           To compile this driver as a module, choose M here: the module will be
 657           called addi_apci_2032.
 658
 659 config COMEDI_ADDI_APCI_2200
 660         tristate "ADDI-DATA APCI_2200 support"
 661         select COMEDI_ADDI_WATCHDOG
 662         ---help---
 663           Enable support for ADDI-DATA APCI_2200 cards
 664
 665           To compile this driver as a module, choose M here: the module will be
 666           called addi_apci_2200.
 667
 668 config COMEDI_ADDI_APCI_3120
 669         tristate "ADDI-DATA APCI_3120/3001 support"
 670         depends on HAS_DMA
 671         ---help---
 672           Enable support for ADDI-DATA APCI_3120/3001 cards
 673
 674           To compile this driver as a module, choose M here: the module will be
 675           called addi_apci_3120.
 676
 677 config COMEDI_ADDI_APCI_3501
 678         tristate "ADDI-DATA APCI_3501 support"
 679         ---help---
 680           Enable support for ADDI-DATA APCI_3501 cards
 681
 682           To compile this driver as a module, choose M here: the module will be
 683           called addi_apci_3501.
 684
 685 config COMEDI_ADDI_APCI_3XXX
 686         tristate "ADDI-DATA APCI_3xxx support"
 687         ---help---
 688           Enable support for ADDI-DATA APCI_3xxx cards
 689
 690           To compile this driver as a module, choose M here: the module will be
 691           called addi_apci_3xxx.
 692
 693 config COMEDI_ADL_PCI6208
 694         tristate "ADLink PCI-6208A support"
 695         ---help---
 696           Enable support for ADLink PCI-6208A cards
 697
 698           To compile this driver as a module, choose M here: the module will be
 699           called adl_pci6208.
 700
 701 config COMEDI_ADL_PCI7X3X
 702         tristate "ADLink PCI-723X/743X isolated digital i/o board support"
 703         ---help---
 704           Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
 705           Supported boards include the 32-channel PCI-7230 (16 in/16 out),
 706           PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
 707           PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
 708
 709           To compile this driver as a module, choose M here: the module will be
 710           called adl_pci7x3x.
 711
 712 config COMEDI_ADL_PCI8164
 713         tristate "ADLink PCI-8164 4 Axes Motion Control board support"
 714         ---help---
 715           Enable support for ADlink PCI-8164 4 Axes Motion Control board
 716
 717           To compile this driver as a module, choose M here: the module will be
 718           called adl_pci8164.
 719
 720 config COMEDI_ADL_PCI9111
 721         tristate "ADLink PCI-9111HR support"
 722         select COMEDI_8254
 723         ---help---
 724           Enable support for ADlink PCI9111 cards
 725
 726           To compile this driver as a module, choose M here: the module will be
 727           called adl_pci9111.
 728
 729 config COMEDI_ADL_PCI9118
 730         tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 731         depends on HAS_DMA
 732         select COMEDI_8254
 733         ---help---
 734           Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
 735
 736           To compile this driver as a module, choose M here: the module will be
 737           called adl_pci9118.
 738
 739 config COMEDI_ADV_PCI1710
 740         tristate "Advantech PCI-171x and PCI-1731 support"
 741         select COMEDI_8254
 742         ---help---
 743           Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
 744           PCI-1713 and PCI-1731
 745
 746           To compile this driver as a module, choose M here: the module will be
 747           called adv_pci1710.
 748
 749 config COMEDI_ADV_PCI1720
 750         tristate "Advantech PCI-1720 support"
 751         ---help---
 752           Enable support for Advantech PCI-1720 Analog Output board.
 753
 754           To compile this driver as a module, choose M here: the module will be
 755           called adv_pci1720.
 756
 757 config COMEDI_ADV_PCI1723
 758         tristate "Advantech PCI-1723 support"
 759         ---help---
 760           Enable support for Advantech PCI-1723 cards
 761
 762           To compile this driver as a module, choose M here: the module will be
 763           called adv_pci1723.
 764
 765 config COMEDI_ADV_PCI1724
 766         tristate "Advantech PCI-1724U support"
 767         ---help---
 768           Enable support for Advantech PCI-1724U cards.  These are 32-channel
 769           analog output cards with voltage and current loop output ranges and
 770           14-bit resolution.
 771
 772           To compile this driver as a module, choose M here: the module will be
 773           called adv_pci1724.
 774
 775 config COMEDI_ADV_PCI1760
 776         tristate "Advantech PCI-1760 support"
 777         ---help---
 778           Enable support for Advantech PCI-1760 board.
 779
 780           To compile this driver as a module, choose M here: the module will be
 781           called adv_pci1760.
 782
 783 config COMEDI_ADV_PCI_DIO
 784         tristate "Advantech PCI DIO card support"
 785         select COMEDI_8254
 786         select COMEDI_8255
 787         ---help---
 788           Enable support for Advantech PCI DIO cards
 789           PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
 790           PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and
 791           PCI-1762
 792
 793           To compile this driver as a module, choose M here: the module will be
 794           called adv_pci_dio.
 795
 796 config COMEDI_AMPLC_DIO200_PCI
 797         tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
 798         select COMEDI_AMPLC_DIO200
 799         ---help---
 800           Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
 801           and PCIe296 DIO boards.
 802
 803           To compile this driver as a module, choose M here: the module will be
 804           called amplc_dio200_pci.
 805
 806 config COMEDI_AMPLC_PC236_PCI
 807         tristate "Amplicon PCI236 DIO board support"
 808         select COMEDI_AMPLC_PC236
 809         ---help---
 810           Enable support for Amplicon PCI236 DIO board.
 811
 812           To compile this driver as a module, choose M here: the module will be
 813           called amplc_pci236.
 814
 815 config COMEDI_AMPLC_PC263_PCI
 816         tristate "Amplicon PCI263 relay board support"
 817         ---help---
 818           Enable support for Amplicon PCI263 relay board.  This is a PCI board
 819           with 16 reed relay output channels.
 820
 821           To compile this driver as a module, choose M here: the module will be
 822           called amplc_pci263.
 823
 824 config COMEDI_AMPLC_PCI224
 825         tristate "Amplicon PCI224 and PCI234 support"
 826         select COMEDI_8254
 827         ---help---
 828           Enable support for Amplicon PCI224 and PCI234 AO boards
 829
 830           To compile this driver as a module, choose M here: the module will be
 831           called amplc_pci224.
 832
 833 config COMEDI_AMPLC_PCI230
 834         tristate "Amplicon PCI230 and PCI260 support"
 835         select COMEDI_8254
 836         select COMEDI_8255
 837         ---help---
 838           Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
 839           boards
 840
 841           To compile this driver as a module, choose M here: the module will be
 842           called amplc_pci230.
 843
 844 config COMEDI_CONTEC_PCI_DIO
 845         tristate "Contec PIO1616L digital I/O board support"
 846         ---help---
 847           Enable support for the Contec PIO1616L digital I/O board
 848
 849           To compile this driver as a module, choose M here: the module will be
 850           called contec_pci_dio.
 851
 852 config COMEDI_DAS08_PCI
 853         tristate "DAS-08 PCI support"
 854         select COMEDI_DAS08
 855         ---help---
 856           Enable support for PCI DAS-08 cards.
 857
 858           To compile this driver as a module, choose M here: the module will be
 859           called das08_pci.
 860
 861 config COMEDI_DT3000
 862         tristate "Data Translation DT3000 series support"
 863         ---help---
 864           Enable support for Data Translation DT3000 series
 865           DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
 866           DT3004-200
 867
 868           To compile this driver as a module, choose M here: the module will be
 869           called dt3000.
 870
 871 config COMEDI_DYNA_PCI10XX
 872         tristate "Dynalog PCI DAQ series support"
 873         ---help---
 874           Enable support for Dynalog PCI DAQ series
 875           PCI-1050
 876
 877           To compile this driver as a module, choose M here: the module will be
 878           called dyna_pci10xx.
 879
 880 config COMEDI_GSC_HPDI
 881         tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
 882         ---help---
 883           Enable support for General Standards Corporation high speed parallel
 884           digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
 885           Only receive mode works, transmit not supported.
 886
 887           To compile this driver as a module, choose M here: the module will be
 888           called gsc_hpdi.
 889
 890 config COMEDI_MF6X4
 891         tristate "Humusoft MF634 and MF624 DAQ Card support"
 892         ---help---
 893           This driver supports both Humusoft MF634 and MF624 Data acquisition
 894           cards. The legacy Humusoft MF614 card is not supported.
 895
 896 config COMEDI_ICP_MULTI
 897         tristate "Inova ICP_MULTI support"
 898         ---help---
 899           Enable support for Inova ICP_MULTI card
 900
 901           To compile this driver as a module, choose M here: the module will be
 902           called icp_multi.
 903
 904 config COMEDI_DAQBOARD2000
 905         tristate "IOtech DAQboard/2000 support"
 906         select COMEDI_8255
 907         ---help---
 908           Enable support for the IOtech DAQboard/2000
 909
 910           To compile this driver as a module, choose M here: the module will be
 911           called daqboard2000.
 912
 913 config COMEDI_JR3_PCI
 914         tristate "JR3/PCI force sensor board support"
 915         ---help---
 916           Enable support for JR3/PCI force sensor boards
 917
 918           To compile this driver as a module, choose M here: the module will be
 919           called jr3_pci.
 920
 921 config COMEDI_KE_COUNTER
 922         tristate "Kolter-Electronic PCI Counter 1 card support"
 923         ---help---
 924           Enable support for Kolter-Electronic PCI Counter 1 cards
 925
 926           To compile this driver as a module, choose M here: the module will be
 927           called ke_counter.
 928
 929 config COMEDI_CB_PCIDAS64
 930         tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
 931         select COMEDI_8255
 932         ---help---
 933           Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
 934           60xx, and 4020 series with the PLX 9080 PCI controller
 935
 936           To compile this driver as a module, choose M here: the module will be
 937           called cb_pcidas64.
 938
 939 config COMEDI_CB_PCIDAS
 940         tristate "MeasurementComputing PCI-DAS support"
 941         select COMEDI_8254
 942         select COMEDI_8255
 943         ---help---
 944           Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
 945           AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
 946           PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
 947           and PCI_DAS1002.
 948
 949           To compile this driver as a module, choose M here: the module will be
 950           called cb_pcidas.
 951
 952 config COMEDI_CB_PCIDDA
 953         tristate "MeasurementComputing PCI-DDA series support"
 954         select COMEDI_8255
 955         ---help---
 956           Enable support for ComputerBoards/MeasurementComputing PCI-DDA
 957           series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
 958           PCI-DDA04/16 and PCI-DDA02/16
 959
 960           To compile this driver as a module, choose M here: the module will be
 961           called cb_pcidda.
 962
 963 config COMEDI_CB_PCIMDAS
 964         tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
 965         select COMEDI_8254
 966         select COMEDI_8255
 967         ---help---
 968           Enable support for ComputerBoards/MeasurementComputing PCI Migration
 969           series PCIM-DAS1602/16 and PCIe-DAS1602/16.
 970
 971           To compile this driver as a module, choose M here: the module will be
 972           called cb_pcimdas.
 973
 974 config COMEDI_CB_PCIMDDA
 975         tristate "MeasurementComputing PCIM-DDA06-16 support"
 976         select COMEDI_8255
 977         ---help---
 978           Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
 979
 980           To compile this driver as a module, choose M here: the module will be
 981           called cb_pcimdda.
 982
 983 config COMEDI_ME4000
 984         tristate "Meilhaus ME-4000 support"
 985         select COMEDI_8254
 986         ---help---
 987           Enable support for Meilhaus PCI data acquisition cards
 988           ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
 989
 990           To compile this driver as a module, choose M here: the module will be
 991           called me4000.
 992
 993 config COMEDI_ME_DAQ
 994         tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
 995         ---help---
 996           Enable support for Meilhaus PCI data acquisition cards
 997           ME-2000i, ME-2600i and ME-3000vm1
 998
 999           To compile this driver as a module, choose M here: the module will be
1000           called me_daq.
1001
1002 config COMEDI_NI_6527
1003         tristate "NI 6527 support"
1004         ---help---
1005           Enable support for the National Instruments 6527 PCI card
1006
1007           To compile this driver as a module, choose M here: the module will be
1008           called ni_6527.
1009
1010 config COMEDI_NI_65XX
1011         tristate "NI 65xx static dio PCI card support"
1012         ---help---
1013           Enable support for National Instruments 65xx static dio boards.
1014           Supported devices: National Instruments PCI-6509 (ni_65xx),
1015           PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1016           PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1017           PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1018
1019           To compile this driver as a module, choose M here: the module will be
1020           called ni_65xx.
1021
1022 config COMEDI_NI_660X
1023         tristate "NI 660x counter/timer PCI card support"
1024         depends on HAS_DMA
1025         select COMEDI_NI_TIOCMD
1026         ---help---
1027           Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1028           PXI-6602, PXI-6608, PCI-6624, and PXI-6624.
1029
1030           To compile this driver as a module, choose M here: the module will be
1031           called ni_660x.
1032
1033 config COMEDI_NI_670X
1034         tristate "NI 670x PCI card support"
1035         ---help---
1036           Enable support for National Instruments PCI-6703 and PCI-6704
1037
1038           To compile this driver as a module, choose M here: the module will be
1039           called ni_670x.
1040
1041 config COMEDI_NI_LABPC_PCI
1042         tristate "NI Lab-PC PCI-1200 support"
1043         select COMEDI_NI_LABPC
1044         ---help---
1045           Enable support for National Instruments Lab-PC PCI-1200.
1046
1047           To compile this driver as a module, choose M here: the module will be
1048           called ni_labpc_pci.
1049
1050 config COMEDI_NI_PCIDIO
1051         tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1052         depends on HAS_DMA
1053         select COMEDI_MITE
1054         select COMEDI_8255
1055         ---help---
1056           Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1057           PCI-6533 and PCI-6534
1058
1059           To compile this driver as a module, choose M here: the module will be
1060           called ni_pcidio.
1061
1062 config COMEDI_NI_PCIMIO
1063         tristate "NI PCI-MIO-E series and M series support"
1064         depends on HAS_DMA
1065         select COMEDI_NI_TIOCMD
1066         select COMEDI_8255
1067         ---help---
1068           Enable support for National Instruments PCI-MIO-E series and M series
1069           (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1070           PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1071           PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1072           PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1073           PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225,
1074           PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251,
1075           PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259,
1076           PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281,
1077           PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711,
1078           PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1079           PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1080
1081           To compile this driver as a module, choose M here: the module will be
1082           called ni_pcimio.
1083
1084 config COMEDI_RTD520
1085         tristate "Real Time Devices PCI4520/DM7520 support"
1086         select COMEDI_8254
1087         ---help---
1088           Enable support for Real Time Devices PCI4520/DM7520
1089
1090           To compile this driver as a module, choose M here: the module will be
1091           called rtd520.
1092
1093 config COMEDI_S626
1094         tristate "Sensoray 626 support"
1095         ---help---
1096           Enable support for Sensoray 626
1097
1098           To compile this driver as a module, choose M here: the module will be
1099           called s626.
1100
1101 config COMEDI_MITE
1102         depends on HAS_DMA
1103         tristate
1104
1105 config COMEDI_NI_TIOCMD
1106         tristate
1107         depends on HAS_DMA
1108         select COMEDI_NI_TIO
1109         select COMEDI_MITE
1110
1111 endif # COMEDI_PCI_DRIVERS
1112
1113 menuconfig COMEDI_PCMCIA_DRIVERS
1114         tristate "Comedi PCMCIA drivers"
1115         depends on PCMCIA
1116         ---help---
1117           Enable support for comedi PCMCIA drivers.
1118
1119           To compile this support as a module, choose M here: the module will
1120           be called comedi_pcmcia.
1121
1122 if COMEDI_PCMCIA_DRIVERS
1123
1124 config COMEDI_CB_DAS16_CS
1125         tristate "CB DAS16 series PCMCIA support"
1126         select COMEDI_8254
1127         ---help---
1128           Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1129           cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1130
1131           To compile this driver as a module, choose M here: the module will be
1132           called cb_das16_cs.
1133
1134 config COMEDI_DAS08_CS
1135         tristate "CB DAS08 PCMCIA support"
1136         select COMEDI_DAS08
1137         ---help---
1138           Enable support for the ComputerBoards/MeasurementComputing DAS-08
1139           PCMCIA card
1140
1141           To compile this driver as a module, choose M here: the module will be
1142           called das08_cs.
1143
1144 config COMEDI_NI_DAQ_700_CS
1145         tristate "NI DAQCard-700 PCMCIA support"
1146         ---help---
1147           Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1148
1149           To compile this driver as a module, choose M here: the module will be
1150           called ni_daq_700.
1151
1152 config COMEDI_NI_DAQ_DIO24_CS
1153         tristate "NI DAQ-Card DIO-24 PCMCIA support"
1154         select COMEDI_8255
1155         ---help---
1156           Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1157
1158           To compile this driver as a module, choose M here: the module will be
1159           called ni_daq_dio24.
1160
1161 config COMEDI_NI_LABPC_CS
1162         tristate "NI DAQCard-1200 PCMCIA support"
1163         select COMEDI_NI_LABPC
1164         ---help---
1165           Enable support for the National Instruments PCMCIA DAQCard-1200
1166
1167           To compile this driver as a module, choose M here: the module will be
1168           called ni_labpc_cs.
1169
1170 config COMEDI_NI_MIO_CS
1171         tristate "NI DAQCard E series PCMCIA support"
1172         select COMEDI_NI_TIO
1173         select COMEDI_8255
1174         ---help---
1175           Enable support for the National Instruments PCMCIA DAQCard E series
1176           DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1177           and DAQCard-6036E
1178
1179           To compile this driver as a module, choose M here: the module will be
1180           called ni_mio_cs.
1181
1182 config COMEDI_QUATECH_DAQP_CS
1183         tristate "Quatech DAQP PCMCIA data capture card support"
1184         ---help---
1185           Enable support for the Quatech DAQP PCMCIA data capture cards
1186           DAQP-208 and DAQP-308
1187
1188           To compile this driver as a module, choose M here: the module will be
1189           called quatech_daqp_cs.
1190
1191 endif # COMEDI_PCMCIA_DRIVERS
1192
1193 menuconfig COMEDI_USB_DRIVERS
1194         tristate "Comedi USB drivers"
1195         depends on USB
1196         ---help---
1197           Enable support for comedi USB drivers.
1198
1199           To compile this support as a module, choose M here: the module will
1200           be called comedi_usb.
1201
1202 if COMEDI_USB_DRIVERS
1203
1204 config COMEDI_DT9812
1205         tristate "DataTranslation DT9812 USB module support"
1206         ---help---
1207           Enable support for the Data Translation DT9812 USB module
1208
1209           To compile this driver as a module, choose M here: the module will be
1210           called dt9812.
1211
1212 config COMEDI_NI_USB6501
1213         tristate "NI USB-6501 support"
1214         ---help---
1215           Enable support for the National Instruments USB-6501 module.
1216
1217           The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1218           provides 24 digital I/O lines channels and one 32-bit counter.
1219
1220           To compile this driver as a module, choose M here: the module will be
1221           called ni_usb6501.
1222
1223 config COMEDI_USBDUX
1224         tristate "ITL USB-DUX-D support"
1225         ---help---
1226           Enable support for the Incite Technology Ltd USB-DUX-D Board
1227
1228           To compile this driver as a module, choose M here: the module will be
1229           called usbdux.
1230
1231 config COMEDI_USBDUXFAST
1232         tristate "ITL USB-DUXfast support"
1233         ---help---
1234           Enable support for the Incite Technology Ltd USB-DUXfast Board
1235
1236           To compile this driver as a module, choose M here: the module will be
1237           called usbduxfast.
1238
1239 config COMEDI_USBDUXSIGMA
1240         tristate "ITL USB-DUXsigma support"
1241         ---help---
1242           Enable support for the Incite Technology Ltd USB-DUXsigma Board
1243
1244           To compile this driver as a module, choose M here: the module will be
1245           called usbduxsigma.
1246
1247 config COMEDI_VMK80XX
1248         tristate "Velleman VM110/VM140 USB Board support"
1249         ---help---
1250           Build the Velleman USB Board Low-Level Driver supporting the
1251           K8055/K8061 aka VM110/VM140 devices
1252
1253           To compile this driver as a module, choose M here: the module will be
1254           called vmk80xx.
1255
1256 endif # COMEDI_USB_DRIVERS
1257
1258 config COMEDI_8254
1259         tristate
1260
1261 config COMEDI_8255
1262         tristate
1263
1264 config COMEDI_8255_SA
1265         tristate "Standalone 8255 support"
1266         select COMEDI_8255
1267         ---help---
1268           Enable support for 8255 digital I/O as a standalone driver.
1269
1270           You should enable compilation this driver if you plan to use a board
1271           that has an 8255 chip at a known I/O base address and there are no
1272           other Comedi drivers for the board.
1273
1274           Note that Comedi drivers for most multi-function boards incorporating
1275           an 8255 chip use the 'comedi_8255' module.  Most PCI-based 8255
1276           boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
1277           module.
1278
1279           To compile this driver as a module, choose M here: the module will be
1280           called 8255.
1281
1282 config COMEDI_KCOMEDILIB
1283         tristate "Comedi kcomedilib"
1284         ---help---
1285           Build the kcomedilib.
1286
1287           This is a kernel module used to open and manipulate Comedi devices
1288           from within kernel code.  It is currently only used by the
1289           comedi_bond driver, and its functionality has been stripped down to
1290           the needs of that driver, so is currently not very useful for
1291           anything else.
1292
1293           To compile kcomedilib as a module, choose M here: the module will be
1294           called kcomedilib.
1295
1296 config COMEDI_AMPLC_DIO200
1297         select COMEDI_8254
1298         tristate
1299
1300 config COMEDI_AMPLC_PC236
1301         tristate
1302         select COMEDI_8255
1303
1304 config COMEDI_DAS08
1305         tristate
1306         select COMEDI_8254
1307         select COMEDI_8255
1308
1309 config COMEDI_ISADMA
1310         tristate
1311
1312 config COMEDI_NI_LABPC
1313         tristate
1314         select COMEDI_8254
1315         select COMEDI_8255
1316
1317 config COMEDI_NI_LABPC_ISADMA
1318         tristate
1319         select COMEDI_ISADMA
1320
1321 config COMEDI_NI_TIO
1322         tristate
1323
1324 endif # COMEDI