drivers/staging/comedi/drivers/plx9052.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Definitions for the PLX-9052 PCI interface chip
   4  *
   5  * Copyright (C) 2002 MEV Ltd. <http://www.mev.co.uk/>
   6  *
   7  * COMEDI - Linux Control and Measurement Device Interface
   8  * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
   9  */
  10
  11 #ifndef _PLX9052_H_
  12 #define _PLX9052_H_
  13
  14 /*
  15  * INTCSR - Interrupt Control/Status register
  16  */
  17 #define PLX9052_INTCSR                  0x4c
  18 #define PLX9052_INTCSR_LI1ENAB          BIT(0)  /* LI1 enabled */
  19 #define PLX9052_INTCSR_LI1POL           BIT(1)  /* LI1 active high */
  20 #define PLX9052_INTCSR_LI1STAT          BIT(2)  /* LI1 active */
  21 #define PLX9052_INTCSR_LI2ENAB          BIT(3)  /* LI2 enabled */
  22 #define PLX9052_INTCSR_LI2POL           BIT(4)  /* LI2 active high */
  23 #define PLX9052_INTCSR_LI2STAT          BIT(5)  /* LI2 active */
  24 #define PLX9052_INTCSR_PCIENAB          BIT(6)  /* PCIINT enabled */
  25 #define PLX9052_INTCSR_SOFTINT          BIT(7)  /* generate soft int */
  26 #define PLX9052_INTCSR_LI1SEL           BIT(8)  /* LI1 edge */
  27 #define PLX9052_INTCSR_LI2SEL           BIT(9)  /* LI2 edge */
  28 #define PLX9052_INTCSR_LI1CLRINT        BIT(10) /* LI1 clear int */
  29 #define PLX9052_INTCSR_LI2CLRINT        BIT(11) /* LI2 clear int */
  30 #define PLX9052_INTCSR_ISAMODE          BIT(12) /* ISA interface mode */
  31
  32 /*
  33  * CNTRL - User I/O, Direct Slave Response, Serial EEPROM, and
  34  * Initialization Control register
  35  */
  36 #define PLX9052_CNTRL                   0x50
  37 #define PLX9052_CNTRL_WAITO             BIT(0)  /* UIO0 or WAITO# select */
  38 #define PLX9052_CNTRL_UIO0_DIR          BIT(1)  /* UIO0 direction */
  39 #define PLX9052_CNTRL_UIO0_DATA         BIT(2)  /* UIO0 data */
  40 #define PLX9052_CNTRL_LLOCKO            BIT(3)  /* UIO1 or LLOCKo# select */
  41 #define PLX9052_CNTRL_UIO1_DIR          BIT(4)  /* UIO1 direction */
  42 #define PLX9052_CNTRL_UIO1_DATA         BIT(5)  /* UIO1 data */
  43 #define PLX9052_CNTRL_CS2               BIT(6)  /* UIO2 or CS2# select */
  44 #define PLX9052_CNTRL_UIO2_DIR          BIT(7)  /* UIO2 direction */
  45 #define PLX9052_CNTRL_UIO2_DATA         BIT(8)  /* UIO2 data */
  46 #define PLX9052_CNTRL_CS3               BIT(9)  /* UIO3 or CS3# select */
  47 #define PLX9052_CNTRL_UIO3_DIR          BIT(10) /* UIO3 direction */
  48 #define PLX9052_CNTRL_UIO3_DATA         BIT(11) /* UIO3 data */
  49 #define PLX9052_CNTRL_PCIBAR(x)         (((x) & 0x3) << 12)
  50 #define PLX9052_CNTRL_PCIBAR01          PLX9052_CNTRL_PCIBAR(0) /* mem and IO */
  51 #define PLX9052_CNTRL_PCIBAR0           PLX9052_CNTRL_PCIBAR(1) /* mem only */
  52 #define PLX9052_CNTRL_PCIBAR1           PLX9052_CNTRL_PCIBAR(2) /* IO only */
  53 #define PLX9052_CNTRL_PCI2_1_FEATURES   BIT(14) /* PCI v2.1 features enabled */
  54 #define PLX9052_CNTRL_PCI_R_W_FLUSH     BIT(15) /* read w/write flush mode */
  55 #define PLX9052_CNTRL_PCI_R_NO_FLUSH    BIT(16) /* read no flush mode */
  56 #define PLX9052_CNTRL_PCI_R_NO_WRITE    BIT(17) /* read no write mode */
  57 #define PLX9052_CNTRL_PCI_W_RELEASE     BIT(18) /* write release bus mode */
  58 #define PLX9052_CNTRL_RETRY_CLKS(x)     (((x) & 0xf) << 19) /* retry clks */
  59 #define PLX9052_CNTRL_LOCK_ENAB         BIT(23) /* slave LOCK# enable */
  60 #define PLX9052_CNTRL_EEPROM_MASK       (0x1f << 24) /* EEPROM bits */
  61 #define PLX9052_CNTRL_EEPROM_CLK        BIT(24) /* EEPROM clock */
  62 #define PLX9052_CNTRL_EEPROM_CS         BIT(25) /* EEPROM chip select */
  63 #define PLX9052_CNTRL_EEPROM_DOUT       BIT(26) /* EEPROM write bit */
  64 #define PLX9052_CNTRL_EEPROM_DIN        BIT(27) /* EEPROM read bit */
  65 #define PLX9052_CNTRL_EEPROM_PRESENT    BIT(28) /* EEPROM present */
  66 #define PLX9052_CNTRL_RELOAD_CFG        BIT(29) /* reload configuration */
  67 #define PLX9052_CNTRL_PCI_RESET         BIT(30) /* PCI adapter reset */
  68 #define PLX9052_CNTRL_MASK_REV          BIT(31) /* mask revision */
  69
  70 #endif /* _PLX9052_H_ */