1 /* Driver for Realtek PCI-Express card reader
3 * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2, or (at your option) any
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
15 * You should have received a copy of the GNU General Public License along
16 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 * Wei WANG (wei_wang@realsil.com.cn)
20 * Micky Ching (micky_ching@realsil.com.cn)
23 #include <linux/blkdev.h>
24 #include <linux/kthread.h>
25 #include <linux/sched.h>
26 #include <linux/workqueue.h>
33 MODULE_DESCRIPTION("Realtek PCI-Express card reader rts5208/rts5288 driver");
34 MODULE_LICENSE("GPL");
36 static unsigned int delay_use
= 1;
37 module_param(delay_use
, uint
, 0644);
38 MODULE_PARM_DESC(delay_use
, "seconds to delay before using a new device");
41 module_param(ss_en
, int, 0644);
42 MODULE_PARM_DESC(ss_en
, "enable selective suspend");
44 static int ss_interval
= 50;
45 module_param(ss_interval
, int, 0644);
46 MODULE_PARM_DESC(ss_interval
, "Interval to enter ss state in seconds");
48 static int auto_delink_en
;
49 module_param(auto_delink_en
, int, 0644);
50 MODULE_PARM_DESC(auto_delink_en
, "enable auto delink");
52 static unsigned char aspm_l0s_l1_en
;
53 module_param(aspm_l0s_l1_en
, byte
, 0644);
54 MODULE_PARM_DESC(aspm_l0s_l1_en
, "enable device aspm");
57 module_param(msi_en
, int, 0644);
58 MODULE_PARM_DESC(msi_en
, "enable msi");
60 static irqreturn_t
rtsx_interrupt(int irq
, void *dev_id
);
62 /***********************************************************************
64 ***********************************************************************/
66 static const char *host_info(struct Scsi_Host
*host
)
68 return "SCSI emulation for PCI-Express Mass Storage devices";
71 static int slave_alloc(struct scsi_device
*sdev
)
74 * Set the INQUIRY transfer length to 36. We don't use any of
75 * the extra data and many devices choke if asked for more or
78 sdev
->inquiry_len
= 36;
82 static int slave_configure(struct scsi_device
*sdev
)
85 * Scatter-gather buffers (all but the last) must have a length
86 * divisible by the bulk maxpacket size. Otherwise a data packet
87 * would end up being short, causing a premature end to the data
88 * transfer. Since high-speed bulk pipes have a maxpacket size
89 * of 512, we'll use that as the scsi device queue's DMA alignment
90 * mask. Guaranteeing proper alignment of the first buffer will
91 * have the desired effect because, except at the beginning and
92 * the end, scatter-gather buffers follow page boundaries.
94 blk_queue_dma_alignment(sdev
->request_queue
, (512 - 1));
96 /* Set the SCSI level to at least 2. We'll leave it at 3 if that's
97 * what is originally reported. We need this to avoid confusing
98 * the SCSI layer with devices that report 0 or 1, but need 10-byte
99 * commands (ala ATAPI devices behind certain bridges, or devices
100 * which simply have broken INQUIRY data).
102 * NOTE: This means /dev/sg programs (ala cdrecord) will get the
103 * actual information. This seems to be the preference for
104 * programs like that.
106 * NOTE: This also means that /proc/scsi/scsi and sysfs may report
107 * the actual value or the modified one, depending on where the
110 if (sdev
->scsi_level
< SCSI_2
)
111 sdev
->scsi_level
= sdev
->sdev_target
->scsi_level
= SCSI_2
;
116 /***********************************************************************
117 * /proc/scsi/ functions
118 ***********************************************************************/
120 /* we use this macro to help us write into the buffer */
122 #define SPRINTF(args...) \
123 do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
125 /* queue a command */
126 /* This is always called with scsi_lock(host) held */
127 static int queuecommand_lck(struct scsi_cmnd
*srb
,
128 void (*done
)(struct scsi_cmnd
*))
130 struct rtsx_dev
*dev
= host_to_rtsx(srb
->device
->host
);
131 struct rtsx_chip
*chip
= dev
->chip
;
133 /* check for state-transition errors */
135 dev_err(&dev
->pci
->dev
, "Error: chip->srb = %p\n",
137 return SCSI_MLQUEUE_HOST_BUSY
;
140 /* fail the command if we are disconnecting */
141 if (rtsx_chk_stat(chip
, RTSX_STAT_DISCONNECT
)) {
142 dev_info(&dev
->pci
->dev
, "Fail command during disconnect\n");
143 srb
->result
= DID_NO_CONNECT
<< 16;
148 /* enqueue the command and wake up the control thread */
149 srb
->scsi_done
= done
;
151 complete(&dev
->cmnd_ready
);
156 static DEF_SCSI_QCMD(queuecommand
)
158 /***********************************************************************
159 * Error handling functions
160 ***********************************************************************/
162 /* Command timeout and abort */
163 static int command_abort(struct scsi_cmnd
*srb
)
165 struct Scsi_Host
*host
= srb
->device
->host
;
166 struct rtsx_dev
*dev
= host_to_rtsx(host
);
167 struct rtsx_chip
*chip
= dev
->chip
;
169 dev_info(&dev
->pci
->dev
, "%s called\n", __func__
);
173 /* Is this command still active? */
174 if (chip
->srb
!= srb
) {
176 dev_info(&dev
->pci
->dev
, "-- nothing to abort\n");
180 rtsx_set_stat(chip
, RTSX_STAT_ABORT
);
184 /* Wait for the aborted command to finish */
185 wait_for_completion(&dev
->notify
);
191 * This invokes the transport reset mechanism to reset the state of the
194 static int device_reset(struct scsi_cmnd
*srb
)
197 struct rtsx_dev
*dev
= host_to_rtsx(srb
->device
->host
);
199 dev_info(&dev
->pci
->dev
, "%s called\n", __func__
);
201 return result
< 0 ? FAILED
: SUCCESS
;
204 /* Simulate a SCSI bus reset by resetting the device's USB port. */
205 static int bus_reset(struct scsi_cmnd
*srb
)
208 struct rtsx_dev
*dev
= host_to_rtsx(srb
->device
->host
);
210 dev_info(&dev
->pci
->dev
, "%s called\n", __func__
);
212 return result
< 0 ? FAILED
: SUCCESS
;
216 * this defines our host template, with which we'll allocate hosts
219 static struct scsi_host_template rtsx_host_template
= {
220 /* basic userland interface stuff */
221 .name
= CR_DRIVER_NAME
,
222 .proc_name
= CR_DRIVER_NAME
,
225 /* command interface -- queued only */
226 .queuecommand
= queuecommand
,
228 /* error and abort handlers */
229 .eh_abort_handler
= command_abort
,
230 .eh_device_reset_handler
= device_reset
,
231 .eh_bus_reset_handler
= bus_reset
,
233 /* queue commands only, only one command per LUN */
236 /* unknown initiator id */
239 .slave_alloc
= slave_alloc
,
240 .slave_configure
= slave_configure
,
242 /* lots of sg segments can be handled */
243 .sg_tablesize
= SG_ALL
,
245 /* limit the total size of a transfer to 120 KB */
248 /* merge commands... this seems to help performance, but
249 * periodically someone should test to see which setting is more
257 /* we do our own delay after a device or bus reset */
258 .skip_settle_delay
= 1,
260 /* module management */
261 .module
= THIS_MODULE
264 static int rtsx_acquire_irq(struct rtsx_dev
*dev
)
266 struct rtsx_chip
*chip
= dev
->chip
;
268 dev_info(&dev
->pci
->dev
, "%s: chip->msi_en = %d, pci->irq = %d\n",
269 __func__
, chip
->msi_en
, dev
->pci
->irq
);
271 if (request_irq(dev
->pci
->irq
, rtsx_interrupt
,
272 chip
->msi_en
? 0 : IRQF_SHARED
,
273 CR_DRIVER_NAME
, dev
)) {
274 dev_err(&dev
->pci
->dev
,
275 "rtsx: unable to grab IRQ %d, disabling device\n",
280 dev
->irq
= dev
->pci
->irq
;
281 pci_intx(dev
->pci
, !chip
->msi_en
);
286 int rtsx_read_pci_cfg_byte(u8 bus
, u8 dev
, u8 func
, u8 offset
, u8
*val
)
288 struct pci_dev
*pdev
;
290 u8 devfn
= (dev
<< 3) | func
;
292 pdev
= pci_get_bus_and_slot(bus
, devfn
);
296 pci_read_config_byte(pdev
, offset
, &data
);
307 static int rtsx_suspend(struct pci_dev
*pci
, pm_message_t state
)
309 struct rtsx_dev
*dev
= pci_get_drvdata(pci
);
310 struct rtsx_chip
*chip
;
315 /* lock the device pointers */
316 mutex_lock(&(dev
->dev_mutex
));
320 rtsx_do_before_power_down(chip
, PM_S3
);
323 free_irq(dev
->irq
, (void *)dev
);
328 pci_disable_msi(pci
);
331 pci_enable_wake(pci
, pci_choose_state(pci
, state
), 1);
332 pci_disable_device(pci
);
333 pci_set_power_state(pci
, pci_choose_state(pci
, state
));
335 /* unlock the device pointers */
336 mutex_unlock(&dev
->dev_mutex
);
341 static int rtsx_resume(struct pci_dev
*pci
)
343 struct rtsx_dev
*dev
= pci_get_drvdata(pci
);
344 struct rtsx_chip
*chip
;
351 /* lock the device pointers */
352 mutex_lock(&(dev
->dev_mutex
));
354 pci_set_power_state(pci
, PCI_D0
);
355 pci_restore_state(pci
);
356 if (pci_enable_device(pci
) < 0) {
357 dev_err(&dev
->pci
->dev
,
358 "%s: pci_enable_device failed, disabling device\n",
360 /* unlock the device pointers */
361 mutex_unlock(&dev
->dev_mutex
);
367 if (pci_enable_msi(pci
) < 0)
371 if (rtsx_acquire_irq(dev
) < 0) {
372 /* unlock the device pointers */
373 mutex_unlock(&dev
->dev_mutex
);
377 rtsx_write_register(chip
, HOST_SLEEP_STATE
, 0x03, 0x00);
378 rtsx_init_chip(chip
);
380 /* unlock the device pointers */
381 mutex_unlock(&dev
->dev_mutex
);
385 #endif /* CONFIG_PM */
387 static void rtsx_shutdown(struct pci_dev
*pci
)
389 struct rtsx_dev
*dev
= pci_get_drvdata(pci
);
390 struct rtsx_chip
*chip
;
397 rtsx_do_before_power_down(chip
, PM_S1
);
400 free_irq(dev
->irq
, (void *)dev
);
405 pci_disable_msi(pci
);
407 pci_disable_device(pci
);
410 static int rtsx_control_thread(void *__dev
)
412 struct rtsx_dev
*dev
= __dev
;
413 struct rtsx_chip
*chip
= dev
->chip
;
414 struct Scsi_Host
*host
= rtsx_to_host(dev
);
417 if (wait_for_completion_interruptible(&dev
->cmnd_ready
))
420 /* lock the device pointers */
421 mutex_lock(&(dev
->dev_mutex
));
423 /* if the device has disconnected, we are free to exit */
424 if (rtsx_chk_stat(chip
, RTSX_STAT_DISCONNECT
)) {
425 dev_info(&dev
->pci
->dev
, "-- rtsx-control exiting\n");
426 mutex_unlock(&dev
->dev_mutex
);
430 /* lock access to the state */
433 /* has the command aborted ? */
434 if (rtsx_chk_stat(chip
, RTSX_STAT_ABORT
)) {
435 chip
->srb
->result
= DID_ABORT
<< 16;
441 /* reject the command if the direction indicator
444 if (chip
->srb
->sc_data_direction
== DMA_BIDIRECTIONAL
) {
445 dev_err(&dev
->pci
->dev
, "UNKNOWN data direction\n");
446 chip
->srb
->result
= DID_ERROR
<< 16;
449 /* reject if target != 0 or if LUN is higher than
450 * the maximum known LUN
452 else if (chip
->srb
->device
->id
) {
453 dev_err(&dev
->pci
->dev
, "Bad target number (%d:%d)\n",
454 chip
->srb
->device
->id
,
455 (u8
)chip
->srb
->device
->lun
);
456 chip
->srb
->result
= DID_BAD_TARGET
<< 16;
459 else if (chip
->srb
->device
->lun
> chip
->max_lun
) {
460 dev_err(&dev
->pci
->dev
, "Bad LUN (%d:%d)\n",
461 chip
->srb
->device
->id
,
462 (u8
)chip
->srb
->device
->lun
);
463 chip
->srb
->result
= DID_BAD_TARGET
<< 16;
466 /* we've got a command, let's do it! */
468 scsi_show_command(chip
);
469 rtsx_invoke_transport(chip
->srb
, chip
);
472 /* lock access to the state */
475 /* did the command already complete because of a disconnect? */
477 ; /* nothing to do */
479 /* indicate that the command is done */
480 else if (chip
->srb
->result
!= DID_ABORT
<< 16) {
481 chip
->srb
->scsi_done(chip
->srb
);
484 dev_err(&dev
->pci
->dev
, "scsi command aborted\n");
487 if (rtsx_chk_stat(chip
, RTSX_STAT_ABORT
)) {
488 complete(&(dev
->notify
));
490 rtsx_set_stat(chip
, RTSX_STAT_IDLE
);
493 /* finished working on this command */
497 /* unlock the device pointers */
498 mutex_unlock(&dev
->dev_mutex
);
501 /* notify the exit routine that we're actually exiting now
503 * complete()/wait_for_completion() is similar to up()/down(),
504 * except that complete() is safe in the case where the structure
505 * is getting deleted in a parallel mode of execution (i.e. just
506 * after the down() -- that's necessary for the thread-shutdown
509 * complete_and_exit() goes even further than this -- it is safe in
510 * the case that the thread of the caller is going away (not just
511 * the structure) -- this is necessary for the module-remove case.
512 * This is important in preemption kernels, which transfer the flow
513 * of execution immediately upon a complete().
515 complete_and_exit(&dev
->control_exit
, 0);
518 static int rtsx_polling_thread(void *__dev
)
520 struct rtsx_dev
*dev
= __dev
;
521 struct rtsx_chip
*chip
= dev
->chip
;
522 struct sd_info
*sd_card
= &(chip
->sd_card
);
523 struct xd_info
*xd_card
= &(chip
->xd_card
);
524 struct ms_info
*ms_card
= &(chip
->ms_card
);
526 sd_card
->cleanup_counter
= 0;
527 xd_card
->cleanup_counter
= 0;
528 ms_card
->cleanup_counter
= 0;
530 /* Wait until SCSI scan finished */
531 wait_timeout((delay_use
+ 5) * 1000);
535 set_current_state(TASK_INTERRUPTIBLE
);
536 schedule_timeout(msecs_to_jiffies(POLLING_INTERVAL
));
538 /* lock the device pointers */
539 mutex_lock(&(dev
->dev_mutex
));
541 /* if the device has disconnected, we are free to exit */
542 if (rtsx_chk_stat(chip
, RTSX_STAT_DISCONNECT
)) {
543 dev_info(&dev
->pci
->dev
, "-- rtsx-polling exiting\n");
544 mutex_unlock(&dev
->dev_mutex
);
548 mutex_unlock(&dev
->dev_mutex
);
550 mspro_polling_format_status(chip
);
552 /* lock the device pointers */
553 mutex_lock(&(dev
->dev_mutex
));
555 rtsx_polling_func(chip
);
557 /* unlock the device pointers */
558 mutex_unlock(&dev
->dev_mutex
);
561 complete_and_exit(&dev
->polling_exit
, 0);
567 static irqreturn_t
rtsx_interrupt(int irq
, void *dev_id
)
569 struct rtsx_dev
*dev
= dev_id
;
570 struct rtsx_chip
*chip
;
582 spin_lock(&dev
->reg_lock
);
584 retval
= rtsx_pre_handle_interrupt(chip
);
585 if (retval
== STATUS_FAIL
) {
586 spin_unlock(&dev
->reg_lock
);
587 if (chip
->int_reg
== 0xFFFFFFFF)
592 status
= chip
->int_reg
;
594 if (dev
->check_card_cd
) {
595 if (!(dev
->check_card_cd
& status
)) {
596 /* card not exist, return TRANS_RESULT_FAIL */
597 dev
->trans_result
= TRANS_RESULT_FAIL
;
604 if (status
& (NEED_COMPLETE_INT
| DELINK_INT
)) {
605 if (status
& (TRANS_FAIL_INT
| DELINK_INT
)) {
606 if (status
& DELINK_INT
)
607 RTSX_SET_DELINK(chip
);
608 dev
->trans_result
= TRANS_RESULT_FAIL
;
611 } else if (status
& TRANS_OK_INT
) {
612 dev
->trans_result
= TRANS_RESULT_OK
;
615 } else if (status
& DATA_DONE_INT
) {
616 dev
->trans_result
= TRANS_NOT_READY
;
617 if (dev
->done
&& (dev
->trans_state
== STATE_TRANS_SG
))
623 spin_unlock(&dev
->reg_lock
);
627 /* Release all our dynamic resources */
628 static void rtsx_release_resources(struct rtsx_dev
*dev
)
630 dev_info(&dev
->pci
->dev
, "-- %s\n", __func__
);
632 /* Tell the control thread to exit. The SCSI host must
633 * already have been removed so it won't try to queue
636 dev_info(&dev
->pci
->dev
, "-- sending exit command to thread\n");
637 complete(&dev
->cmnd_ready
);
639 wait_for_completion(&dev
->control_exit
);
640 if (dev
->polling_thread
)
641 wait_for_completion(&dev
->polling_exit
);
645 if (dev
->rtsx_resv_buf
) {
646 dev
->chip
->host_cmds_ptr
= NULL
;
647 dev
->chip
->host_sg_tbl_ptr
= NULL
;
651 free_irq(dev
->irq
, (void *)dev
);
652 if (dev
->chip
->msi_en
)
653 pci_disable_msi(dev
->pci
);
655 iounmap(dev
->remap_addr
);
657 rtsx_release_chip(dev
->chip
);
662 * First stage of disconnect processing: stop all commands and remove
665 static void quiesce_and_remove_host(struct rtsx_dev
*dev
)
667 struct Scsi_Host
*host
= rtsx_to_host(dev
);
668 struct rtsx_chip
*chip
= dev
->chip
;
671 * Prevent new transfers, stop the current command, and
672 * interrupt a SCSI-scan or device-reset delay
674 mutex_lock(&dev
->dev_mutex
);
676 rtsx_set_stat(chip
, RTSX_STAT_DISCONNECT
);
678 mutex_unlock(&dev
->dev_mutex
);
679 wake_up(&dev
->delay_wait
);
680 wait_for_completion(&dev
->scanning_done
);
682 /* Wait some time to let other threads exist */
686 * queuecommand won't accept any new commands and the control
687 * thread won't execute a previously-queued command. If there
688 * is such a command pending, complete it with an error.
690 mutex_lock(&dev
->dev_mutex
);
692 chip
->srb
->result
= DID_NO_CONNECT
<< 16;
694 chip
->srb
->scsi_done(dev
->chip
->srb
);
698 mutex_unlock(&dev
->dev_mutex
);
700 /* Now we own no commands so it's safe to remove the SCSI host */
701 scsi_remove_host(host
);
704 /* Second stage of disconnect processing: deallocate all resources */
705 static void release_everything(struct rtsx_dev
*dev
)
707 rtsx_release_resources(dev
);
710 * Drop our reference to the host; the SCSI core will free it
711 * when the refcount becomes 0.
713 scsi_host_put(rtsx_to_host(dev
));
716 /* Thread to carry out delayed SCSI-device scanning */
717 static int rtsx_scan_thread(void *__dev
)
719 struct rtsx_dev
*dev
= __dev
;
720 struct rtsx_chip
*chip
= dev
->chip
;
722 /* Wait for the timeout to expire or for a disconnect */
724 dev_info(&dev
->pci
->dev
,
725 "%s: waiting for device to settle before scanning\n",
727 wait_event_interruptible_timeout(dev
->delay_wait
,
728 rtsx_chk_stat(chip
, RTSX_STAT_DISCONNECT
),
732 /* If the device is still connected, perform the scanning */
733 if (!rtsx_chk_stat(chip
, RTSX_STAT_DISCONNECT
)) {
734 scsi_scan_host(rtsx_to_host(dev
));
735 dev_info(&dev
->pci
->dev
, "%s: device scan complete\n",
738 /* Should we unbind if no devices were detected? */
741 complete_and_exit(&dev
->scanning_done
, 0);
744 static void rtsx_init_options(struct rtsx_chip
*chip
)
746 chip
->vendor_id
= chip
->rtsx
->pci
->vendor
;
747 chip
->product_id
= chip
->rtsx
->pci
->device
;
750 chip
->driver_first_load
= 1;
751 #ifdef HW_AUTO_SWITCH_SD_BUS
752 chip
->sdio_in_charge
= 0;
755 chip
->mspro_formatter_enable
= 1;
757 chip
->use_hw_setting
= 0;
758 chip
->lun_mode
= DEFAULT_SINGLE
;
759 chip
->auto_delink_en
= auto_delink_en
;
761 chip
->ss_idle_period
= ss_interval
* 1000;
762 chip
->remote_wakeup_en
= 0;
763 chip
->aspm_l0s_l1_en
= aspm_l0s_l1_en
;
764 chip
->dynamic_aspm
= 1;
765 chip
->fpga_sd_sdr104_clk
= CLK_200
;
766 chip
->fpga_sd_ddr50_clk
= CLK_100
;
767 chip
->fpga_sd_sdr50_clk
= CLK_100
;
768 chip
->fpga_sd_hs_clk
= CLK_100
;
769 chip
->fpga_mmc_52m_clk
= CLK_80
;
770 chip
->fpga_ms_hg_clk
= CLK_80
;
771 chip
->fpga_ms_4bit_clk
= CLK_80
;
772 chip
->fpga_ms_1bit_clk
= CLK_40
;
773 chip
->asic_sd_sdr104_clk
= 203;
774 chip
->asic_sd_sdr50_clk
= 98;
775 chip
->asic_sd_ddr50_clk
= 98;
776 chip
->asic_sd_hs_clk
= 98;
777 chip
->asic_mmc_52m_clk
= 98;
778 chip
->asic_ms_hg_clk
= 117;
779 chip
->asic_ms_4bit_clk
= 78;
780 chip
->asic_ms_1bit_clk
= 39;
781 chip
->ssc_depth_sd_sdr104
= SSC_DEPTH_2M
;
782 chip
->ssc_depth_sd_sdr50
= SSC_DEPTH_2M
;
783 chip
->ssc_depth_sd_ddr50
= SSC_DEPTH_1M
;
784 chip
->ssc_depth_sd_hs
= SSC_DEPTH_1M
;
785 chip
->ssc_depth_mmc_52m
= SSC_DEPTH_1M
;
786 chip
->ssc_depth_ms_hg
= SSC_DEPTH_1M
;
787 chip
->ssc_depth_ms_4bit
= SSC_DEPTH_512K
;
788 chip
->ssc_depth_low_speed
= SSC_DEPTH_512K
;
790 chip
->sd_speed_prior
= 0x01040203;
791 chip
->sd_current_prior
= 0x00010203;
792 chip
->sd_ctl
= SD_PUSH_POINT_AUTO
|
793 SD_SAMPLE_POINT_AUTO
|
794 SUPPORT_MMC_DDR_MODE
;
795 chip
->sd_ddr_tx_phase
= 0;
796 chip
->mmc_ddr_tx_phase
= 1;
797 chip
->sd_default_tx_phase
= 15;
798 chip
->sd_default_rx_phase
= 15;
799 chip
->pmos_pwr_on_interval
= 200;
800 chip
->sd_voltage_switch_delay
= 1000;
801 chip
->ms_power_class_en
= 3;
803 chip
->sd_400mA_ocp_thd
= 1;
804 chip
->sd_800mA_ocp_thd
= 5;
805 chip
->ms_ocp_thd
= 2;
807 chip
->card_drive_sel
= 0x55;
808 chip
->sd30_drive_sel_1v8
= 0x03;
809 chip
->sd30_drive_sel_3v3
= 0x01;
811 chip
->do_delink_before_power_down
= 1;
812 chip
->auto_power_down
= 1;
813 chip
->polling_config
= 0;
815 chip
->force_clkreq_0
= 1;
816 chip
->ft2_fast_mode
= 0;
818 chip
->sdio_retry_cnt
= 1;
820 chip
->xd_timeout
= 2000;
821 chip
->sd_timeout
= 10000;
822 chip
->ms_timeout
= 2000;
823 chip
->mspro_timeout
= 15000;
825 chip
->power_down_in_ss
= 1;
831 chip
->delink_stage1_step
= 100;
832 chip
->delink_stage2_step
= 40;
833 chip
->delink_stage3_step
= 20;
835 chip
->auto_delink_in_L1
= 1;
837 chip
->msi_en
= msi_en
;
838 chip
->hp_watch_bios_hotplug
= 0;
839 chip
->max_payload
= 0;
840 chip
->phy_voltage
= 0;
842 chip
->support_ms_8bit
= 1;
843 chip
->s3_pwr_off_delay
= 1000;
846 static int rtsx_probe(struct pci_dev
*pci
,
847 const struct pci_device_id
*pci_id
)
849 struct Scsi_Host
*host
;
850 struct rtsx_dev
*dev
;
852 struct task_struct
*th
;
854 dev_dbg(&pci
->dev
, "Realtek PCI-E card reader detected\n");
856 err
= pcim_enable_device(pci
);
858 dev_err(&pci
->dev
, "PCI enable device failed!\n");
862 err
= pci_request_regions(pci
, CR_DRIVER_NAME
);
864 dev_err(&pci
->dev
, "PCI request regions for %s failed!\n",
870 * Ask the SCSI layer to allocate a host structure, with extra
871 * space at the end for our private rtsx_dev structure.
873 host
= scsi_host_alloc(&rtsx_host_template
, sizeof(*dev
));
875 dev_err(&pci
->dev
, "Unable to allocate the scsi host\n");
879 dev
= host_to_rtsx(host
);
880 memset(dev
, 0, sizeof(struct rtsx_dev
));
882 dev
->chip
= kzalloc(sizeof(struct rtsx_chip
), GFP_KERNEL
);
888 spin_lock_init(&dev
->reg_lock
);
889 mutex_init(&(dev
->dev_mutex
));
890 init_completion(&dev
->cmnd_ready
);
891 init_completion(&dev
->control_exit
);
892 init_completion(&dev
->polling_exit
);
893 init_completion(&(dev
->notify
));
894 init_completion(&dev
->scanning_done
);
895 init_waitqueue_head(&dev
->delay_wait
);
900 dev_info(&pci
->dev
, "Resource length: 0x%x\n",
901 (unsigned int)pci_resource_len(pci
, 0));
902 dev
->addr
= pci_resource_start(pci
, 0);
903 dev
->remap_addr
= ioremap_nocache(dev
->addr
, pci_resource_len(pci
, 0));
904 if (!dev
->remap_addr
) {
905 dev_err(&pci
->dev
, "ioremap error\n");
911 * Using "unsigned long" cast here to eliminate gcc warning in
914 dev_info(&pci
->dev
, "Original address: 0x%lx, remapped address: 0x%lx\n",
915 (unsigned long)(dev
->addr
), (unsigned long)(dev
->remap_addr
));
917 dev
->rtsx_resv_buf
= dmam_alloc_coherent(&pci
->dev
, RTSX_RESV_BUF_LEN
,
918 &dev
->rtsx_resv_buf_addr
, GFP_KERNEL
);
919 if (!dev
->rtsx_resv_buf
) {
920 dev_err(&pci
->dev
, "alloc dma buffer fail\n");
924 dev
->chip
->host_cmds_ptr
= dev
->rtsx_resv_buf
;
925 dev
->chip
->host_cmds_addr
= dev
->rtsx_resv_buf_addr
;
926 dev
->chip
->host_sg_tbl_ptr
= dev
->rtsx_resv_buf
+ HOST_CMDS_BUF_LEN
;
927 dev
->chip
->host_sg_tbl_addr
= dev
->rtsx_resv_buf_addr
+
930 dev
->chip
->rtsx
= dev
;
932 rtsx_init_options(dev
->chip
);
934 dev_info(&pci
->dev
, "pci->irq = %d\n", pci
->irq
);
936 if (dev
->chip
->msi_en
) {
937 if (pci_enable_msi(pci
) < 0)
938 dev
->chip
->msi_en
= 0;
941 if (rtsx_acquire_irq(dev
) < 0) {
947 synchronize_irq(dev
->irq
);
949 rtsx_init_chip(dev
->chip
);
952 * set the supported max_lun and max_id for the scsi host
953 * NOTE: the minimal value of max_id is 1
956 host
->max_lun
= dev
->chip
->max_lun
;
958 /* Start up our control thread */
959 th
= kthread_run(rtsx_control_thread
, dev
, CR_DRIVER_NAME
);
961 dev_err(&pci
->dev
, "Unable to start control thread\n");
965 dev
->ctl_thread
= th
;
967 err
= scsi_add_host(host
, &pci
->dev
);
969 dev_err(&pci
->dev
, "Unable to add the scsi host\n");
973 /* Start up the thread for delayed SCSI-device scanning */
974 th
= kthread_run(rtsx_scan_thread
, dev
, "rtsx-scan");
976 dev_err(&pci
->dev
, "Unable to start the device-scanning thread\n");
977 complete(&dev
->scanning_done
);
978 quiesce_and_remove_host(dev
);
983 /* Start up the thread for polling thread */
984 th
= kthread_run(rtsx_polling_thread
, dev
, "rtsx-polling");
986 dev_err(&pci
->dev
, "Unable to start the device-polling thread\n");
987 quiesce_and_remove_host(dev
);
991 dev
->polling_thread
= th
;
993 pci_set_drvdata(pci
, dev
);
997 /* We come here if there are any problems */
999 dev_err(&pci
->dev
, "rtsx_probe() failed\n");
1000 release_everything(dev
);
1005 static void rtsx_remove(struct pci_dev
*pci
)
1007 struct rtsx_dev
*dev
= pci_get_drvdata(pci
);
1009 dev_info(&pci
->dev
, "rtsx_remove() called\n");
1011 quiesce_and_remove_host(dev
);
1012 release_everything(dev
);
1016 static const struct pci_device_id rtsx_ids
[] = {
1017 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK
, 0x5208),
1018 PCI_CLASS_OTHERS
<< 16, 0xFF0000 },
1019 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK
, 0x5288),
1020 PCI_CLASS_OTHERS
<< 16, 0xFF0000 },
1024 MODULE_DEVICE_TABLE(pci
, rtsx_ids
);
1026 /* pci_driver definition */
1027 static struct pci_driver rtsx_driver
= {
1028 .name
= CR_DRIVER_NAME
,
1029 .id_table
= rtsx_ids
,
1030 .probe
= rtsx_probe
,
1031 .remove
= rtsx_remove
,
1033 .suspend
= rtsx_suspend
,
1034 .resume
= rtsx_resume
,
1036 .shutdown
= rtsx_shutdown
,
1039 module_pci_driver(rtsx_driver
);