2 * SCSI Primary Commands (SPC) parsing and emulation.
4 * (c) Copyright 2002-2013 Datera, Inc.
6 * Nicholas A. Bellinger <nab@kernel.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <asm/unaligned.h>
27 #include <scsi/scsi.h>
28 #include <scsi/scsi_tcq.h>
30 #include <target/target_core_base.h>
31 #include <target/target_core_backend.h>
32 #include <target/target_core_fabric.h>
34 #include "target_core_internal.h"
35 #include "target_core_alua.h"
36 #include "target_core_pr.h"
37 #include "target_core_ua.h"
38 #include "target_core_xcopy.h"
40 static void spc_fill_alua_data(struct se_port
*port
, unsigned char *buf
)
42 struct t10_alua_tg_pt_gp
*tg_pt_gp
;
43 struct t10_alua_tg_pt_gp_member
*tg_pt_gp_mem
;
46 * Set SCCS for MAINTENANCE_IN + REPORT_TARGET_PORT_GROUPS.
51 * Set TPGS field for explicit and/or implicit ALUA access type
54 * See spc4r17 section 6.4.2 Table 135
58 tg_pt_gp_mem
= port
->sep_alua_tg_pt_gp_mem
;
62 spin_lock(&tg_pt_gp_mem
->tg_pt_gp_mem_lock
);
63 tg_pt_gp
= tg_pt_gp_mem
->tg_pt_gp
;
65 buf
[5] |= tg_pt_gp
->tg_pt_gp_alua_access_type
;
66 spin_unlock(&tg_pt_gp_mem
->tg_pt_gp_mem_lock
);
70 spc_emulate_inquiry_std(struct se_cmd
*cmd
, unsigned char *buf
)
72 struct se_lun
*lun
= cmd
->se_lun
;
73 struct se_device
*dev
= cmd
->se_dev
;
74 struct se_session
*sess
= cmd
->se_sess
;
76 /* Set RMB (removable media) for tape devices */
77 if (dev
->transport
->get_device_type(dev
) == TYPE_TAPE
)
80 buf
[2] = 0x05; /* SPC-3 */
83 * NORMACA and HISUP = 0, RESPONSE DATA FORMAT = 2
86 * A RESPONSE DATA FORMAT field set to 2h indicates that the
87 * standard INQUIRY data is in the format defined in this
88 * standard. Response data format values less than 2h are
89 * obsolete. Response data format values greater than 2h are
95 * Enable SCCS and TPGS fields for Emulated ALUA
97 spc_fill_alua_data(lun
->lun_sep
, buf
);
100 * Set Third-Party Copy (3PC) bit to indicate support for EXTENDED_COPY
102 if (dev
->dev_attrib
.emulate_3pc
)
105 * Set Protection (PROTECT) bit when DIF has been enabled on the
106 * device, and the transport supports VERIFY + PASS.
108 if (sess
->sup_prot_ops
& (TARGET_PROT_DIN_PASS
| TARGET_PROT_DOUT_PASS
)) {
109 if (dev
->dev_attrib
.pi_prot_type
)
113 buf
[7] = 0x2; /* CmdQue=1 */
115 memcpy(&buf
[8], "LIO-ORG ", 8);
116 memset(&buf
[16], 0x20, 16);
117 memcpy(&buf
[16], dev
->t10_wwn
.model
,
118 min_t(size_t, strlen(dev
->t10_wwn
.model
), 16));
119 memcpy(&buf
[32], dev
->t10_wwn
.revision
,
120 min_t(size_t, strlen(dev
->t10_wwn
.revision
), 4));
121 buf
[4] = 31; /* Set additional length to 31 */
125 EXPORT_SYMBOL(spc_emulate_inquiry_std
);
127 /* unit serial number */
128 static sense_reason_t
129 spc_emulate_evpd_80(struct se_cmd
*cmd
, unsigned char *buf
)
131 struct se_device
*dev
= cmd
->se_dev
;
134 if (dev
->dev_flags
& DF_EMULATED_VPD_UNIT_SERIAL
) {
135 len
= sprintf(&buf
[4], "%s", dev
->t10_wwn
.unit_serial
);
136 len
++; /* Extra Byte for NULL Terminator */
142 void spc_parse_naa_6h_vendor_specific(struct se_device
*dev
,
145 unsigned char *p
= &dev
->t10_wwn
.unit_serial
[0];
150 * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on
151 * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field
152 * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION
153 * to complete the payload. These are based from VPD=0x80 PRODUCT SERIAL
154 * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure
155 * per device uniqeness.
157 for (cnt
= 0; *p
&& cnt
< 13; p
++) {
158 int val
= hex_to_bin(*p
);
174 * Device identification VPD, for a complete list of
175 * DESIGNATOR TYPEs see spc4r17 Table 459.
178 spc_emulate_evpd_83(struct se_cmd
*cmd
, unsigned char *buf
)
180 struct se_device
*dev
= cmd
->se_dev
;
181 struct se_lun
*lun
= cmd
->se_lun
;
182 struct se_port
*port
= NULL
;
183 struct se_portal_group
*tpg
= NULL
;
184 struct t10_alua_lu_gp_member
*lu_gp_mem
;
185 struct t10_alua_tg_pt_gp
*tg_pt_gp
;
186 struct t10_alua_tg_pt_gp_member
*tg_pt_gp_mem
;
187 unsigned char *prod
= &dev
->t10_wwn
.model
[0];
189 u32 unit_serial_len
, off
= 0;
195 * NAA IEEE Registered Extended Assigned designator format, see
196 * spc4r17 section 7.7.3.6.5
198 * We depend upon a target_core_mod/ConfigFS provided
199 * /sys/kernel/config/target/core/$HBA/$DEV/wwn/vpd_unit_serial
200 * value in order to return the NAA id.
202 if (!(dev
->dev_flags
& DF_EMULATED_VPD_UNIT_SERIAL
))
203 goto check_t10_vend_desc
;
205 /* CODE SET == Binary */
208 /* Set ASSOCIATION == addressed logical unit: 0)b */
211 /* Identifier/Designator type == NAA identifier */
215 /* Identifier/Designator length */
219 * Start NAA IEEE Registered Extended Identifier/Designator
221 buf
[off
++] = (0x6 << 4);
224 * Use OpenFabrics IEEE Company ID: 00 14 05
228 buf
[off
] = (0x5 << 4);
231 * Return ConfigFS Unit Serial Number information for
232 * VENDOR_SPECIFIC_IDENTIFIER and
233 * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION
235 spc_parse_naa_6h_vendor_specific(dev
, &buf
[off
]);
242 * T10 Vendor Identifier Page, see spc4r17 section 7.7.3.4
244 id_len
= 8; /* For Vendor field */
245 prod_len
= 4; /* For VPD Header */
246 prod_len
+= 8; /* For Vendor field */
247 prod_len
+= strlen(prod
);
248 prod_len
++; /* For : */
250 if (dev
->dev_flags
& DF_EMULATED_VPD_UNIT_SERIAL
) {
251 unit_serial_len
= strlen(&dev
->t10_wwn
.unit_serial
[0]);
252 unit_serial_len
++; /* For NULL Terminator */
254 id_len
+= sprintf(&buf
[off
+12], "%s:%s", prod
,
255 &dev
->t10_wwn
.unit_serial
[0]);
257 buf
[off
] = 0x2; /* ASCII */
258 buf
[off
+1] = 0x1; /* T10 Vendor ID */
260 memcpy(&buf
[off
+4], "LIO-ORG", 8);
261 /* Extra Byte for NULL Terminator */
263 /* Identifier Length */
265 /* Header size for Designation descriptor */
269 * struct se_port is only set for INQUIRY VPD=1 through $FABRIC_MOD
273 struct t10_alua_lu_gp
*lu_gp
;
274 u32 padding
, scsi_name_len
, scsi_target_len
;
281 * Relative target port identifer, see spc4r17
284 * Get the PROTOCOL IDENTIFIER as defined by spc4r17
285 * section 7.5.1 Table 362
288 (tpg
->se_tpg_tfo
->get_fabric_proto_ident(tpg
) << 4);
289 buf
[off
++] |= 0x1; /* CODE SET == Binary */
290 buf
[off
] = 0x80; /* Set PIV=1 */
291 /* Set ASSOCIATION == target port: 01b */
293 /* DESIGNATOR TYPE == Relative target port identifer */
295 off
++; /* Skip over Reserved */
296 buf
[off
++] = 4; /* DESIGNATOR LENGTH */
297 /* Skip over Obsolete field in RTPI payload
300 buf
[off
++] = ((port
->sep_rtpi
>> 8) & 0xff);
301 buf
[off
++] = (port
->sep_rtpi
& 0xff);
302 len
+= 8; /* Header size + Designation descriptor */
304 * Target port group identifier, see spc4r17
307 * Get the PROTOCOL IDENTIFIER as defined by spc4r17
308 * section 7.5.1 Table 362
310 tg_pt_gp_mem
= port
->sep_alua_tg_pt_gp_mem
;
314 spin_lock(&tg_pt_gp_mem
->tg_pt_gp_mem_lock
);
315 tg_pt_gp
= tg_pt_gp_mem
->tg_pt_gp
;
317 spin_unlock(&tg_pt_gp_mem
->tg_pt_gp_mem_lock
);
320 tg_pt_gp_id
= tg_pt_gp
->tg_pt_gp_id
;
321 spin_unlock(&tg_pt_gp_mem
->tg_pt_gp_mem_lock
);
324 (tpg
->se_tpg_tfo
->get_fabric_proto_ident(tpg
) << 4);
325 buf
[off
++] |= 0x1; /* CODE SET == Binary */
326 buf
[off
] = 0x80; /* Set PIV=1 */
327 /* Set ASSOCIATION == target port: 01b */
329 /* DESIGNATOR TYPE == Target port group identifier */
331 off
++; /* Skip over Reserved */
332 buf
[off
++] = 4; /* DESIGNATOR LENGTH */
333 off
+= 2; /* Skip over Reserved Field */
334 buf
[off
++] = ((tg_pt_gp_id
>> 8) & 0xff);
335 buf
[off
++] = (tg_pt_gp_id
& 0xff);
336 len
+= 8; /* Header size + Designation descriptor */
338 * Logical Unit Group identifier, see spc4r17
342 lu_gp_mem
= dev
->dev_alua_lu_gp_mem
;
344 goto check_scsi_name
;
346 spin_lock(&lu_gp_mem
->lu_gp_mem_lock
);
347 lu_gp
= lu_gp_mem
->lu_gp
;
349 spin_unlock(&lu_gp_mem
->lu_gp_mem_lock
);
350 goto check_scsi_name
;
352 lu_gp_id
= lu_gp
->lu_gp_id
;
353 spin_unlock(&lu_gp_mem
->lu_gp_mem_lock
);
355 buf
[off
++] |= 0x1; /* CODE SET == Binary */
356 /* DESIGNATOR TYPE == Logical Unit Group identifier */
358 off
++; /* Skip over Reserved */
359 buf
[off
++] = 4; /* DESIGNATOR LENGTH */
360 off
+= 2; /* Skip over Reserved Field */
361 buf
[off
++] = ((lu_gp_id
>> 8) & 0xff);
362 buf
[off
++] = (lu_gp_id
& 0xff);
363 len
+= 8; /* Header size + Designation descriptor */
365 * SCSI name string designator, see spc4r17
368 * Get the PROTOCOL IDENTIFIER as defined by spc4r17
369 * section 7.5.1 Table 362
373 (tpg
->se_tpg_tfo
->get_fabric_proto_ident(tpg
) << 4);
374 buf
[off
++] |= 0x3; /* CODE SET == UTF-8 */
375 buf
[off
] = 0x80; /* Set PIV=1 */
376 /* Set ASSOCIATION == target port: 01b */
378 /* DESIGNATOR TYPE == SCSI name string */
380 off
+= 2; /* Skip over Reserved and length */
382 * SCSI name string identifer containing, $FABRIC_MOD
383 * dependent information. For LIO-Target and iSCSI
384 * Target Port, this means "<iSCSI name>,t,0x<TPGT> in
387 tpgt
= tpg
->se_tpg_tfo
->tpg_get_tag(tpg
);
388 scsi_name_len
= sprintf(&buf
[off
], "%s,t,0x%04x",
389 tpg
->se_tpg_tfo
->tpg_get_wwn(tpg
), tpgt
);
390 scsi_name_len
+= 1 /* Include NULL terminator */;
392 * The null-terminated, null-padded (see 4.4.2) SCSI
393 * NAME STRING field contains a UTF-8 format string.
394 * The number of bytes in the SCSI NAME STRING field
395 * (i.e., the value in the DESIGNATOR LENGTH field)
396 * shall be no larger than 256 and shall be a multiple
399 padding
= ((-scsi_name_len
) & 3);
401 scsi_name_len
+= padding
;
402 if (scsi_name_len
> 256)
405 buf
[off
-1] = scsi_name_len
;
406 off
+= scsi_name_len
;
407 /* Header size + Designation descriptor */
408 len
+= (scsi_name_len
+ 4);
411 * Target device designator
414 (tpg
->se_tpg_tfo
->get_fabric_proto_ident(tpg
) << 4);
415 buf
[off
++] |= 0x3; /* CODE SET == UTF-8 */
416 buf
[off
] = 0x80; /* Set PIV=1 */
417 /* Set ASSOCIATION == target device: 10b */
419 /* DESIGNATOR TYPE == SCSI name string */
421 off
+= 2; /* Skip over Reserved and length */
423 * SCSI name string identifer containing, $FABRIC_MOD
424 * dependent information. For LIO-Target and iSCSI
425 * Target Port, this means "<iSCSI name>" in
428 scsi_target_len
= sprintf(&buf
[off
], "%s",
429 tpg
->se_tpg_tfo
->tpg_get_wwn(tpg
));
430 scsi_target_len
+= 1 /* Include NULL terminator */;
432 * The null-terminated, null-padded (see 4.4.2) SCSI
433 * NAME STRING field contains a UTF-8 format string.
434 * The number of bytes in the SCSI NAME STRING field
435 * (i.e., the value in the DESIGNATOR LENGTH field)
436 * shall be no larger than 256 and shall be a multiple
439 padding
= ((-scsi_target_len
) & 3);
441 scsi_target_len
+= padding
;
442 if (scsi_target_len
> 256)
443 scsi_target_len
= 256;
445 buf
[off
-1] = scsi_target_len
;
446 off
+= scsi_target_len
;
448 /* Header size + Designation descriptor */
449 len
+= (scsi_target_len
+ 4);
451 buf
[2] = ((len
>> 8) & 0xff);
452 buf
[3] = (len
& 0xff); /* Page Length for VPD 0x83 */
455 EXPORT_SYMBOL(spc_emulate_evpd_83
);
458 spc_check_dev_wce(struct se_device
*dev
)
462 if (dev
->transport
->get_write_cache
)
463 wce
= dev
->transport
->get_write_cache(dev
);
464 else if (dev
->dev_attrib
.emulate_write_cache
> 0)
470 /* Extended INQUIRY Data VPD Page */
471 static sense_reason_t
472 spc_emulate_evpd_86(struct se_cmd
*cmd
, unsigned char *buf
)
474 struct se_device
*dev
= cmd
->se_dev
;
475 struct se_session
*sess
= cmd
->se_sess
;
479 * Set GRD_CHK + REF_CHK for TYPE1 protection, or GRD_CHK
480 * only for TYPE3 protection.
482 if (sess
->sup_prot_ops
& (TARGET_PROT_DIN_PASS
| TARGET_PROT_DOUT_PASS
)) {
483 if (dev
->dev_attrib
.pi_prot_type
== TARGET_DIF_TYPE1_PROT
)
485 else if (dev
->dev_attrib
.pi_prot_type
== TARGET_DIF_TYPE3_PROT
)
489 /* Set HEADSUP, ORDSUP, SIMPSUP */
492 /* If WriteCache emulation is enabled, set V_SUP */
493 if (spc_check_dev_wce(dev
))
495 /* If an LBA map is present set R_SUP */
496 spin_lock(&cmd
->se_dev
->t10_alua
.lba_map_lock
);
497 if (!list_empty(&dev
->t10_alua
.lba_map_list
))
499 spin_unlock(&cmd
->se_dev
->t10_alua
.lba_map_lock
);
503 /* Block Limits VPD page */
504 static sense_reason_t
505 spc_emulate_evpd_b0(struct se_cmd
*cmd
, unsigned char *buf
)
507 struct se_device
*dev
= cmd
->se_dev
;
512 * Following spc3r22 section 6.5.3 Block Limits VPD page, when
513 * emulate_tpu=1 or emulate_tpws=1 we will be expect a
514 * different page length for Thin Provisioning.
516 if (dev
->dev_attrib
.emulate_tpu
|| dev
->dev_attrib
.emulate_tpws
)
519 buf
[0] = dev
->transport
->get_device_type(dev
);
520 buf
[3] = have_tp
? 0x3c : 0x10;
525 * Set MAXIMUM COMPARE AND WRITE LENGTH
527 if (dev
->dev_attrib
.emulate_caw
)
531 * Set OPTIMAL TRANSFER LENGTH GRANULARITY
533 if (dev
->transport
->get_io_min
&& (min
= dev
->transport
->get_io_min(dev
)))
534 put_unaligned_be16(min
/ dev
->dev_attrib
.block_size
, &buf
[6]);
536 put_unaligned_be16(1, &buf
[6]);
539 * Set MAXIMUM TRANSFER LENGTH
541 put_unaligned_be32(dev
->dev_attrib
.hw_max_sectors
, &buf
[8]);
544 * Set OPTIMAL TRANSFER LENGTH
546 if (dev
->transport
->get_io_opt
&& (opt
= dev
->transport
->get_io_opt(dev
)))
547 put_unaligned_be32(opt
/ dev
->dev_attrib
.block_size
, &buf
[12]);
549 put_unaligned_be32(dev
->dev_attrib
.optimal_sectors
, &buf
[12]);
552 * Exit now if we don't support TP.
558 * Set MAXIMUM UNMAP LBA COUNT
560 put_unaligned_be32(dev
->dev_attrib
.max_unmap_lba_count
, &buf
[20]);
563 * Set MAXIMUM UNMAP BLOCK DESCRIPTOR COUNT
565 put_unaligned_be32(dev
->dev_attrib
.max_unmap_block_desc_count
,
569 * Set OPTIMAL UNMAP GRANULARITY
571 put_unaligned_be32(dev
->dev_attrib
.unmap_granularity
, &buf
[28]);
574 * UNMAP GRANULARITY ALIGNMENT
576 put_unaligned_be32(dev
->dev_attrib
.unmap_granularity_alignment
,
578 if (dev
->dev_attrib
.unmap_granularity_alignment
!= 0)
579 buf
[32] |= 0x80; /* Set the UGAVALID bit */
582 * MAXIMUM WRITE SAME LENGTH
585 put_unaligned_be64(dev
->dev_attrib
.max_write_same_len
, &buf
[36]);
590 /* Block Device Characteristics VPD page */
591 static sense_reason_t
592 spc_emulate_evpd_b1(struct se_cmd
*cmd
, unsigned char *buf
)
594 struct se_device
*dev
= cmd
->se_dev
;
596 buf
[0] = dev
->transport
->get_device_type(dev
);
598 buf
[5] = dev
->dev_attrib
.is_nonrot
? 1 : 0;
603 /* Thin Provisioning VPD */
604 static sense_reason_t
605 spc_emulate_evpd_b2(struct se_cmd
*cmd
, unsigned char *buf
)
607 struct se_device
*dev
= cmd
->se_dev
;
610 * From spc3r22 section 6.5.4 Thin Provisioning VPD page:
612 * The PAGE LENGTH field is defined in SPC-4. If the DP bit is set to
613 * zero, then the page length shall be set to 0004h. If the DP bit
614 * is set to one, then the page length shall be set to the value
615 * defined in table 162.
617 buf
[0] = dev
->transport
->get_device_type(dev
);
620 * Set Hardcoded length mentioned above for DP=0
622 put_unaligned_be16(0x0004, &buf
[2]);
625 * The THRESHOLD EXPONENT field indicates the threshold set size in
626 * LBAs as a power of 2 (i.e., the threshold set size is equal to
627 * 2(threshold exponent)).
629 * Note that this is currently set to 0x00 as mkp says it will be
630 * changing again. We can enable this once it has settled in T10
631 * and is actually used by Linux/SCSI ML code.
636 * A TPU bit set to one indicates that the device server supports
637 * the UNMAP command (see 5.25). A TPU bit set to zero indicates
638 * that the device server does not support the UNMAP command.
640 if (dev
->dev_attrib
.emulate_tpu
!= 0)
644 * A TPWS bit set to one indicates that the device server supports
645 * the use of the WRITE SAME (16) command (see 5.42) to unmap LBAs.
646 * A TPWS bit set to zero indicates that the device server does not
647 * support the use of the WRITE SAME (16) command to unmap LBAs.
649 if (dev
->dev_attrib
.emulate_tpws
!= 0)
650 buf
[5] |= 0x40 | 0x20;
655 /* Referrals VPD page */
656 static sense_reason_t
657 spc_emulate_evpd_b3(struct se_cmd
*cmd
, unsigned char *buf
)
659 struct se_device
*dev
= cmd
->se_dev
;
661 buf
[0] = dev
->transport
->get_device_type(dev
);
663 put_unaligned_be32(dev
->t10_alua
.lba_map_segment_size
, &buf
[8]);
664 put_unaligned_be32(dev
->t10_alua
.lba_map_segment_multiplier
, &buf
[12]);
669 static sense_reason_t
670 spc_emulate_evpd_00(struct se_cmd
*cmd
, unsigned char *buf
);
674 sense_reason_t (*emulate
)(struct se_cmd
*, unsigned char *);
675 } evpd_handlers
[] = {
676 { .page
= 0x00, .emulate
= spc_emulate_evpd_00
},
677 { .page
= 0x80, .emulate
= spc_emulate_evpd_80
},
678 { .page
= 0x83, .emulate
= spc_emulate_evpd_83
},
679 { .page
= 0x86, .emulate
= spc_emulate_evpd_86
},
680 { .page
= 0xb0, .emulate
= spc_emulate_evpd_b0
},
681 { .page
= 0xb1, .emulate
= spc_emulate_evpd_b1
},
682 { .page
= 0xb2, .emulate
= spc_emulate_evpd_b2
},
683 { .page
= 0xb3, .emulate
= spc_emulate_evpd_b3
},
686 /* supported vital product data pages */
687 static sense_reason_t
688 spc_emulate_evpd_00(struct se_cmd
*cmd
, unsigned char *buf
)
693 * Only report the INQUIRY EVPD=1 pages after a valid NAA
694 * Registered Extended LUN WWN has been set via ConfigFS
695 * during device creation/restart.
697 if (cmd
->se_dev
->dev_flags
& DF_EMULATED_VPD_UNIT_SERIAL
) {
698 buf
[3] = ARRAY_SIZE(evpd_handlers
);
699 for (p
= 0; p
< ARRAY_SIZE(evpd_handlers
); ++p
)
700 buf
[p
+ 4] = evpd_handlers
[p
].page
;
706 static sense_reason_t
707 spc_emulate_inquiry(struct se_cmd
*cmd
)
709 struct se_device
*dev
= cmd
->se_dev
;
710 struct se_portal_group
*tpg
= cmd
->se_lun
->lun_sep
->sep_tpg
;
712 unsigned char *cdb
= cmd
->t_task_cdb
;
718 buf
= kzalloc(SE_INQUIRY_BUF
, GFP_KERNEL
);
720 pr_err("Unable to allocate response buffer for INQUIRY\n");
721 return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE
;
724 if (dev
== tpg
->tpg_virt_lun0
.lun_se_dev
)
725 buf
[0] = 0x3f; /* Not connected */
727 buf
[0] = dev
->transport
->get_device_type(dev
);
729 if (!(cdb
[1] & 0x1)) {
731 pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n",
733 ret
= TCM_INVALID_CDB_FIELD
;
737 ret
= spc_emulate_inquiry_std(cmd
, buf
);
742 for (p
= 0; p
< ARRAY_SIZE(evpd_handlers
); ++p
) {
743 if (cdb
[2] == evpd_handlers
[p
].page
) {
745 ret
= evpd_handlers
[p
].emulate(cmd
, buf
);
746 len
= get_unaligned_be16(&buf
[2]) + 4;
751 pr_err("Unknown VPD Code: 0x%02x\n", cdb
[2]);
752 ret
= TCM_INVALID_CDB_FIELD
;
755 rbuf
= transport_kmap_data_sg(cmd
);
757 memcpy(rbuf
, buf
, min_t(u32
, SE_INQUIRY_BUF
, cmd
->data_length
));
758 transport_kunmap_data_sg(cmd
);
763 target_complete_cmd_with_length(cmd
, GOOD
, len
);
767 static int spc_modesense_rwrecovery(struct se_cmd
*cmd
, u8 pc
, u8
*p
)
772 /* No changeable values for now */
780 static int spc_modesense_control(struct se_cmd
*cmd
, u8 pc
, u8
*p
)
782 struct se_device
*dev
= cmd
->se_dev
;
783 struct se_session
*sess
= cmd
->se_sess
;
788 /* No changeable values for now */
794 * From spc4r23, 7.4.7 Control mode page
796 * The QUEUE ALGORITHM MODIFIER field (see table 368) specifies
797 * restrictions on the algorithm used for reordering commands
798 * having the SIMPLE task attribute (see SAM-4).
800 * Table 368 -- QUEUE ALGORITHM MODIFIER field
802 * 0h Restricted reordering
803 * 1h Unrestricted reordering allowed
805 * 8h to Fh Vendor specific
807 * A value of zero in the QUEUE ALGORITHM MODIFIER field specifies that
808 * the device server shall order the processing sequence of commands
809 * having the SIMPLE task attribute such that data integrity is maintained
810 * for that I_T nexus (i.e., if the transmission of new SCSI transport protocol
811 * requests is halted at any time, the final value of all data observable
812 * on the medium shall be the same as if all the commands had been processed
813 * with the ORDERED task attribute).
815 * A value of one in the QUEUE ALGORITHM MODIFIER field specifies that the
816 * device server may reorder the processing sequence of commands having the
817 * SIMPLE task attribute in any manner. Any data integrity exposures related to
818 * command sequence order shall be explicitly handled by the application client
819 * through the selection of appropriate ommands and task attributes.
821 p
[3] = (dev
->dev_attrib
.emulate_rest_reord
== 1) ? 0x00 : 0x10;
823 * From spc4r17, section 7.4.6 Control mode Page
825 * Unit Attention interlocks control (UN_INTLCK_CTRL) to code 00b
827 * 00b: The logical unit shall clear any unit attention condition
828 * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION
829 * status and shall not establish a unit attention condition when a com-
830 * mand is completed with BUSY, TASK SET FULL, or RESERVATION CONFLICT
833 * 10b: The logical unit shall not clear any unit attention condition
834 * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION
835 * status and shall not establish a unit attention condition when
836 * a command is completed with BUSY, TASK SET FULL, or RESERVATION
839 * 11b a The logical unit shall not clear any unit attention condition
840 * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION
841 * status and shall establish a unit attention condition for the
842 * initiator port associated with the I_T nexus on which the BUSY,
843 * TASK SET FULL, or RESERVATION CONFLICT status is being returned.
844 * Depending on the status, the additional sense code shall be set to
845 * PREVIOUS BUSY STATUS, PREVIOUS TASK SET FULL STATUS, or PREVIOUS
846 * RESERVATION CONFLICT STATUS. Until it is cleared by a REQUEST SENSE
847 * command, a unit attention condition shall be established only once
848 * for a BUSY, TASK SET FULL, or RESERVATION CONFLICT status regardless
849 * to the number of commands completed with one of those status codes.
851 p
[4] = (dev
->dev_attrib
.emulate_ua_intlck_ctrl
== 2) ? 0x30 :
852 (dev
->dev_attrib
.emulate_ua_intlck_ctrl
== 1) ? 0x20 : 0x00;
854 * From spc4r17, section 7.4.6 Control mode Page
856 * Task Aborted Status (TAS) bit set to zero.
858 * A task aborted status (TAS) bit set to zero specifies that aborted
859 * tasks shall be terminated by the device server without any response
860 * to the application client. A TAS bit set to one specifies that tasks
861 * aborted by the actions of an I_T nexus other than the I_T nexus on
862 * which the command was received shall be completed with TASK ABORTED
863 * status (see SAM-4).
865 p
[5] = (dev
->dev_attrib
.emulate_tas
) ? 0x40 : 0x00;
867 * From spc4r30, section 7.5.7 Control mode page
869 * Application Tag Owner (ATO) bit set to one.
871 * If the ATO bit is set to one the device server shall not modify the
872 * LOGICAL BLOCK APPLICATION TAG field and, depending on the protection
873 * type, shall not modify the contents of the LOGICAL BLOCK REFERENCE
876 if (sess
->sup_prot_ops
& (TARGET_PROT_DIN_PASS
| TARGET_PROT_DOUT_PASS
)) {
877 if (dev
->dev_attrib
.pi_prot_type
)
889 static int spc_modesense_caching(struct se_cmd
*cmd
, u8 pc
, u8
*p
)
891 struct se_device
*dev
= cmd
->se_dev
;
896 /* No changeable values for now */
900 if (spc_check_dev_wce(dev
))
901 p
[2] = 0x04; /* Write Cache Enable */
902 p
[12] = 0x20; /* Disabled Read Ahead */
908 static int spc_modesense_informational_exceptions(struct se_cmd
*cmd
, u8 pc
, unsigned char *p
)
913 /* No changeable values for now */
924 int (*emulate
)(struct se_cmd
*, u8
, unsigned char *);
925 } modesense_handlers
[] = {
926 { .page
= 0x01, .subpage
= 0x00, .emulate
= spc_modesense_rwrecovery
},
927 { .page
= 0x08, .subpage
= 0x00, .emulate
= spc_modesense_caching
},
928 { .page
= 0x0a, .subpage
= 0x00, .emulate
= spc_modesense_control
},
929 { .page
= 0x1c, .subpage
= 0x00, .emulate
= spc_modesense_informational_exceptions
},
932 static void spc_modesense_write_protect(unsigned char *buf
, int type
)
935 * I believe that the WP bit (bit 7) in the mode header is the same for
942 buf
[0] |= 0x80; /* WP bit */
947 static void spc_modesense_dpofua(unsigned char *buf
, int type
)
951 buf
[0] |= 0x10; /* DPOFUA bit */
958 static int spc_modesense_blockdesc(unsigned char *buf
, u64 blocks
, u32 block_size
)
961 put_unaligned_be32(min(blocks
, 0xffffffffull
), buf
);
963 put_unaligned_be32(block_size
, buf
);
967 static int spc_modesense_long_blockdesc(unsigned char *buf
, u64 blocks
, u32 block_size
)
969 if (blocks
<= 0xffffffff)
970 return spc_modesense_blockdesc(buf
+ 3, blocks
, block_size
) + 3;
972 *buf
++ = 1; /* LONGLBA */
975 put_unaligned_be64(blocks
, buf
);
977 put_unaligned_be32(block_size
, buf
);
982 static sense_reason_t
spc_emulate_modesense(struct se_cmd
*cmd
)
984 struct se_device
*dev
= cmd
->se_dev
;
985 char *cdb
= cmd
->t_task_cdb
;
986 unsigned char buf
[SE_MODE_PAGE_BUF
], *rbuf
;
987 int type
= dev
->transport
->get_device_type(dev
);
988 int ten
= (cmd
->t_task_cdb
[0] == MODE_SENSE_10
);
989 bool dbd
= !!(cdb
[1] & 0x08);
990 bool llba
= ten
? !!(cdb
[1] & 0x10) : false;
992 u8 page
= cdb
[2] & 0x3f;
998 memset(buf
, 0, SE_MODE_PAGE_BUF
);
1001 * Skip over MODE DATA LENGTH + MEDIUM TYPE fields to byte 3 for
1002 * MODE_SENSE_10 and byte 2 for MODE_SENSE (6).
1004 length
= ten
? 3 : 2;
1006 /* DEVICE-SPECIFIC PARAMETER */
1007 if ((cmd
->se_lun
->lun_access
& TRANSPORT_LUNFLAGS_READ_ONLY
) ||
1009 (cmd
->se_deve
->lun_flags
& TRANSPORT_LUNFLAGS_READ_ONLY
)))
1010 spc_modesense_write_protect(&buf
[length
], type
);
1012 if ((spc_check_dev_wce(dev
)) &&
1013 (dev
->dev_attrib
.emulate_fua_write
> 0))
1014 spc_modesense_dpofua(&buf
[length
], type
);
1018 /* BLOCK DESCRIPTOR */
1021 * For now we only include a block descriptor for disk (SBC)
1022 * devices; other command sets use a slightly different format.
1024 if (!dbd
&& type
== TYPE_DISK
) {
1025 u64 blocks
= dev
->transport
->get_blocks(dev
);
1026 u32 block_size
= dev
->dev_attrib
.block_size
;
1030 length
+= spc_modesense_long_blockdesc(&buf
[length
],
1031 blocks
, block_size
);
1034 length
+= spc_modesense_blockdesc(&buf
[length
],
1035 blocks
, block_size
);
1038 length
+= spc_modesense_blockdesc(&buf
[length
], blocks
,
1049 if (subpage
!= 0x00 && subpage
!= 0xff) {
1050 pr_warn("MODE_SENSE: Invalid subpage code: 0x%02x\n", subpage
);
1051 return TCM_INVALID_CDB_FIELD
;
1054 for (i
= 0; i
< ARRAY_SIZE(modesense_handlers
); ++i
) {
1056 * Tricky way to say all subpage 00h for
1057 * subpage==0, all subpages for subpage==0xff
1058 * (and we just checked above that those are
1059 * the only two possibilities).
1061 if ((modesense_handlers
[i
].subpage
& ~subpage
) == 0) {
1062 ret
= modesense_handlers
[i
].emulate(cmd
, pc
, &buf
[length
]);
1063 if (!ten
&& length
+ ret
>= 255)
1072 for (i
= 0; i
< ARRAY_SIZE(modesense_handlers
); ++i
)
1073 if (modesense_handlers
[i
].page
== page
&&
1074 modesense_handlers
[i
].subpage
== subpage
) {
1075 length
+= modesense_handlers
[i
].emulate(cmd
, pc
, &buf
[length
]);
1080 * We don't intend to implement:
1081 * - obsolete page 03h "format parameters" (checked by Solaris)
1084 pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n",
1087 return TCM_UNKNOWN_MODE_PAGE
;
1091 put_unaligned_be16(length
- 2, buf
);
1093 buf
[0] = length
- 1;
1095 rbuf
= transport_kmap_data_sg(cmd
);
1097 memcpy(rbuf
, buf
, min_t(u32
, SE_MODE_PAGE_BUF
, cmd
->data_length
));
1098 transport_kunmap_data_sg(cmd
);
1101 target_complete_cmd_with_length(cmd
, GOOD
, length
);
1105 static sense_reason_t
spc_emulate_modeselect(struct se_cmd
*cmd
)
1107 char *cdb
= cmd
->t_task_cdb
;
1108 bool ten
= cdb
[0] == MODE_SELECT_10
;
1109 int off
= ten
? 8 : 4;
1110 bool pf
= !!(cdb
[1] & 0x10);
1113 unsigned char tbuf
[SE_MODE_PAGE_BUF
];
1118 if (!cmd
->data_length
) {
1119 target_complete_cmd(cmd
, GOOD
);
1123 if (cmd
->data_length
< off
+ 2)
1124 return TCM_PARAMETER_LIST_LENGTH_ERROR
;
1126 buf
= transport_kmap_data_sg(cmd
);
1128 return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE
;
1131 ret
= TCM_INVALID_CDB_FIELD
;
1135 page
= buf
[off
] & 0x3f;
1136 subpage
= buf
[off
] & 0x40 ? buf
[off
+ 1] : 0;
1138 for (i
= 0; i
< ARRAY_SIZE(modesense_handlers
); ++i
)
1139 if (modesense_handlers
[i
].page
== page
&&
1140 modesense_handlers
[i
].subpage
== subpage
) {
1141 memset(tbuf
, 0, SE_MODE_PAGE_BUF
);
1142 length
= modesense_handlers
[i
].emulate(cmd
, 0, tbuf
);
1143 goto check_contents
;
1146 ret
= TCM_UNKNOWN_MODE_PAGE
;
1150 if (cmd
->data_length
< off
+ length
) {
1151 ret
= TCM_PARAMETER_LIST_LENGTH_ERROR
;
1155 if (memcmp(buf
+ off
, tbuf
, length
))
1156 ret
= TCM_INVALID_PARAMETER_LIST
;
1159 transport_kunmap_data_sg(cmd
);
1162 target_complete_cmd(cmd
, GOOD
);
1166 static sense_reason_t
spc_emulate_request_sense(struct se_cmd
*cmd
)
1168 unsigned char *cdb
= cmd
->t_task_cdb
;
1169 unsigned char *rbuf
;
1170 u8 ua_asc
= 0, ua_ascq
= 0;
1171 unsigned char buf
[SE_SENSE_BUF
];
1173 memset(buf
, 0, SE_SENSE_BUF
);
1175 if (cdb
[1] & 0x01) {
1176 pr_err("REQUEST_SENSE description emulation not"
1178 return TCM_INVALID_CDB_FIELD
;
1181 rbuf
= transport_kmap_data_sg(cmd
);
1183 return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE
;
1185 if (!core_scsi3_ua_clear_for_request_sense(cmd
, &ua_asc
, &ua_ascq
)) {
1187 * CURRENT ERROR, UNIT ATTENTION
1190 buf
[SPC_SENSE_KEY_OFFSET
] = UNIT_ATTENTION
;
1193 * The Additional Sense Code (ASC) from the UNIT ATTENTION
1195 buf
[SPC_ASC_KEY_OFFSET
] = ua_asc
;
1196 buf
[SPC_ASCQ_KEY_OFFSET
] = ua_ascq
;
1200 * CURRENT ERROR, NO SENSE
1203 buf
[SPC_SENSE_KEY_OFFSET
] = NO_SENSE
;
1206 * NO ADDITIONAL SENSE INFORMATION
1208 buf
[SPC_ASC_KEY_OFFSET
] = 0x00;
1212 memcpy(rbuf
, buf
, min_t(u32
, sizeof(buf
), cmd
->data_length
));
1213 transport_kunmap_data_sg(cmd
);
1215 target_complete_cmd(cmd
, GOOD
);
1219 sense_reason_t
spc_emulate_report_luns(struct se_cmd
*cmd
)
1221 struct se_dev_entry
*deve
;
1222 struct se_session
*sess
= cmd
->se_sess
;
1224 u32 lun_count
= 0, offset
= 8, i
;
1226 if (cmd
->data_length
< 16) {
1227 pr_warn("REPORT LUNS allocation length %u too small\n",
1229 return TCM_INVALID_CDB_FIELD
;
1232 buf
= transport_kmap_data_sg(cmd
);
1234 return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE
;
1237 * If no struct se_session pointer is present, this struct se_cmd is
1238 * coming via a target_core_mod PASSTHROUGH op, and not through
1239 * a $FABRIC_MOD. In that case, report LUN=0 only.
1242 int_to_scsilun(0, (struct scsi_lun
*)&buf
[offset
]);
1247 spin_lock_irq(&sess
->se_node_acl
->device_list_lock
);
1248 for (i
= 0; i
< TRANSPORT_MAX_LUNS_PER_TPG
; i
++) {
1249 deve
= sess
->se_node_acl
->device_list
[i
];
1250 if (!(deve
->lun_flags
& TRANSPORT_LUNFLAGS_INITIATOR_ACCESS
))
1253 * We determine the correct LUN LIST LENGTH even once we
1254 * have reached the initial allocation length.
1255 * See SPC2-R20 7.19.
1258 if ((offset
+ 8) > cmd
->data_length
)
1261 int_to_scsilun(deve
->mapped_lun
, (struct scsi_lun
*)&buf
[offset
]);
1264 spin_unlock_irq(&sess
->se_node_acl
->device_list_lock
);
1267 * See SPC3 r07, page 159.
1271 buf
[0] = ((lun_count
>> 24) & 0xff);
1272 buf
[1] = ((lun_count
>> 16) & 0xff);
1273 buf
[2] = ((lun_count
>> 8) & 0xff);
1274 buf
[3] = (lun_count
& 0xff);
1275 transport_kunmap_data_sg(cmd
);
1277 target_complete_cmd_with_length(cmd
, GOOD
, 8 + lun_count
* 8);
1280 EXPORT_SYMBOL(spc_emulate_report_luns
);
1282 static sense_reason_t
1283 spc_emulate_testunitready(struct se_cmd
*cmd
)
1285 target_complete_cmd(cmd
, GOOD
);
1290 spc_parse_cdb(struct se_cmd
*cmd
, unsigned int *size
)
1292 struct se_device
*dev
= cmd
->se_dev
;
1293 unsigned char *cdb
= cmd
->t_task_cdb
;
1298 cmd
->execute_cmd
= spc_emulate_modeselect
;
1300 case MODE_SELECT_10
:
1301 *size
= (cdb
[7] << 8) + cdb
[8];
1302 cmd
->execute_cmd
= spc_emulate_modeselect
;
1306 cmd
->execute_cmd
= spc_emulate_modesense
;
1309 *size
= (cdb
[7] << 8) + cdb
[8];
1310 cmd
->execute_cmd
= spc_emulate_modesense
;
1314 *size
= (cdb
[7] << 8) + cdb
[8];
1316 case PERSISTENT_RESERVE_IN
:
1317 *size
= (cdb
[7] << 8) + cdb
[8];
1318 cmd
->execute_cmd
= target_scsi3_emulate_pr_in
;
1320 case PERSISTENT_RESERVE_OUT
:
1321 *size
= (cdb
[7] << 8) + cdb
[8];
1322 cmd
->execute_cmd
= target_scsi3_emulate_pr_out
;
1326 if (cdb
[0] == RELEASE_10
)
1327 *size
= (cdb
[7] << 8) | cdb
[8];
1329 *size
= cmd
->data_length
;
1331 cmd
->execute_cmd
= target_scsi2_reservation_release
;
1336 * The SPC-2 RESERVE does not contain a size in the SCSI CDB.
1337 * Assume the passthrough or $FABRIC_MOD will tell us about it.
1339 if (cdb
[0] == RESERVE_10
)
1340 *size
= (cdb
[7] << 8) | cdb
[8];
1342 *size
= cmd
->data_length
;
1344 cmd
->execute_cmd
= target_scsi2_reservation_reserve
;
1348 cmd
->execute_cmd
= spc_emulate_request_sense
;
1351 *size
= (cdb
[3] << 8) + cdb
[4];
1354 * Do implicit HEAD_OF_QUEUE processing for INQUIRY.
1355 * See spc4r17 section 5.3
1357 cmd
->sam_task_attr
= TCM_HEAD_TAG
;
1358 cmd
->execute_cmd
= spc_emulate_inquiry
;
1360 case SECURITY_PROTOCOL_IN
:
1361 case SECURITY_PROTOCOL_OUT
:
1362 *size
= (cdb
[6] << 24) | (cdb
[7] << 16) | (cdb
[8] << 8) | cdb
[9];
1365 *size
= get_unaligned_be32(&cdb
[10]);
1366 cmd
->execute_cmd
= target_do_xcopy
;
1368 case RECEIVE_COPY_RESULTS
:
1369 *size
= get_unaligned_be32(&cdb
[10]);
1370 cmd
->execute_cmd
= target_do_receive_copy_results
;
1372 case READ_ATTRIBUTE
:
1373 case WRITE_ATTRIBUTE
:
1374 *size
= (cdb
[10] << 24) | (cdb
[11] << 16) |
1375 (cdb
[12] << 8) | cdb
[13];
1377 case RECEIVE_DIAGNOSTIC
:
1378 case SEND_DIAGNOSTIC
:
1379 *size
= (cdb
[3] << 8) | cdb
[4];
1382 *size
= (cdb
[6] << 16) + (cdb
[7] << 8) + cdb
[8];
1385 cmd
->execute_cmd
= spc_emulate_report_luns
;
1386 *size
= (cdb
[6] << 24) | (cdb
[7] << 16) | (cdb
[8] << 8) | cdb
[9];
1388 * Do implicit HEAD_OF_QUEUE processing for REPORT_LUNS
1389 * See spc4r17 section 5.3
1391 cmd
->sam_task_attr
= TCM_HEAD_TAG
;
1393 case TEST_UNIT_READY
:
1394 cmd
->execute_cmd
= spc_emulate_testunitready
;
1397 case MAINTENANCE_IN
:
1398 if (dev
->transport
->get_device_type(dev
) != TYPE_ROM
) {
1400 * MAINTENANCE_IN from SCC-2
1401 * Check for emulated MI_REPORT_TARGET_PGS
1403 if ((cdb
[1] & 0x1f) == MI_REPORT_TARGET_PGS
) {
1405 target_emulate_report_target_port_groups
;
1407 *size
= get_unaligned_be32(&cdb
[6]);
1410 * GPCMD_SEND_KEY from multi media commands
1412 *size
= get_unaligned_be16(&cdb
[8]);
1415 case MAINTENANCE_OUT
:
1416 if (dev
->transport
->get_device_type(dev
) != TYPE_ROM
) {
1418 * MAINTENANCE_OUT from SCC-2
1419 * Check for emulated MO_SET_TARGET_PGS.
1421 if (cdb
[1] == MO_SET_TARGET_PGS
) {
1423 target_emulate_set_target_port_groups
;
1425 *size
= get_unaligned_be32(&cdb
[6]);
1428 * GPCMD_SEND_KEY from multi media commands
1430 *size
= get_unaligned_be16(&cdb
[8]);
1434 pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode"
1435 " 0x%02x, sending CHECK_CONDITION.\n",
1436 cmd
->se_tfo
->get_fabric_name(), cdb
[0]);
1437 return TCM_UNSUPPORTED_SCSI_OPCODE
;
1442 EXPORT_SYMBOL(spc_parse_cdb
);