Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux...

[mirror_ubuntu-artful-kernel.git] / drivers / thermal / samsung / exynos_tmu.c

/*
 * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
 *
 *  Copyright (C) 2011 Samsung Electronics
 *  Donggeun Kim <dg77.kim@samsung.com>
 *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#include <linux/clk.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>

#include "exynos_thermal_common.h"
#include "exynos_tmu.h"
#include "exynos_tmu_data.h"

/**
 * struct exynos_tmu_data : A structure to hold the private data of the TMU
        driver
 * @id: identifier of the one instance of the TMU controller.
 * @pdata: pointer to the tmu platform/configuration data
 * @base: base address of the single instance of the TMU controller.
 * @base_second: base address of the common registers of the TMU controller.
 * @irq: irq number of the TMU controller.
 * @soc: id of the SOC type.
 * @irq_work: pointer to the irq work structure.
 * @lock: lock to implement synchronization.
 * @clk: pointer to the clock structure.
 * @clk_sec: pointer to the clock structure for accessing the base_second.
 * @temp_error1: fused value of the first point trim.
 * @temp_error2: fused value of the second point trim.
 * @regulator: pointer to the TMU regulator structure.
 * @reg_conf: pointer to structure to register with core thermal.
 */
struct exynos_tmu_data {
        int id;
        struct exynos_tmu_platform_data *pdata;
        void __iomem *base;
        void __iomem *base_second;
        int irq;
        enum soc_type soc;
        struct work_struct irq_work;
        struct mutex lock;
        struct clk *clk, *clk_sec;
        u8 temp_error1, temp_error2;
        struct regulator *regulator;
        struct thermal_sensor_conf *reg_conf;
};

/*
 * TMU treats temperature as a mapped temperature code.
 * The temperature is converted differently depending on the calibration type.
 */
static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
{
        struct exynos_tmu_platform_data *pdata = data->pdata;
        int temp_code;

        if (pdata->cal_mode == HW_MODE)
                return temp;

        if (data->soc == SOC_ARCH_EXYNOS4210)
                /* temp should range between 25 and 125 */
                if (temp < 25 || temp > 125) {
                        temp_code = -EINVAL;
                        goto out;
                }

        switch (pdata->cal_type) {
        case TYPE_TWO_POINT_TRIMMING:
                temp_code = (temp - pdata->first_point_trim) *
                        (data->temp_error2 - data->temp_error1) /
                        (pdata->second_point_trim - pdata->first_point_trim) +
                        data->temp_error1;
                break;
        case TYPE_ONE_POINT_TRIMMING:
                temp_code = temp + data->temp_error1 - pdata->first_point_trim;
                break;
        default:
                temp_code = temp + pdata->default_temp_offset;
                break;
        }
out:
        return temp_code;
}

/*
 * Calculate a temperature value from a temperature code.
 * The unit of the temperature is degree Celsius.
 */
static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
{
        struct exynos_tmu_platform_data *pdata = data->pdata;
        int temp;

        if (pdata->cal_mode == HW_MODE)
                return temp_code;

        if (data->soc == SOC_ARCH_EXYNOS4210)
                /* temp_code should range between 75 and 175 */
                if (temp_code < 75 || temp_code > 175) {
                        temp = -ENODATA;
                        goto out;
                }

        switch (pdata->cal_type) {
        case TYPE_TWO_POINT_TRIMMING:
                temp = (temp_code - data->temp_error1) *
                        (pdata->second_point_trim - pdata->first_point_trim) /
                        (data->temp_error2 - data->temp_error1) +
                        pdata->first_point_trim;
                break;
        case TYPE_ONE_POINT_TRIMMING:
                temp = temp_code - data->temp_error1 + pdata->first_point_trim;
                break;
        default:
                temp = temp_code - pdata->default_temp_offset;
                break;
        }
out:
        return temp;
}

static int exynos_tmu_initialize(struct platform_device *pdev)
{
        struct exynos_tmu_data *data = platform_get_drvdata(pdev);
        struct exynos_tmu_platform_data *pdata = data->pdata;
        const struct exynos_tmu_registers *reg = pdata->registers;
        unsigned int status, trim_info = 0, con;
        unsigned int rising_threshold = 0, falling_threshold = 0;
        int ret = 0, threshold_code, i, trigger_levs = 0;

        mutex_lock(&data->lock);
        clk_enable(data->clk);
        if (!IS_ERR(data->clk_sec))
                clk_enable(data->clk_sec);

        if (TMU_SUPPORTS(pdata, READY_STATUS)) {
                status = readb(data->base + reg->tmu_status);
                if (!status) {
                        ret = -EBUSY;
                        goto out;
                }
        }

        if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
                __raw_writel(1, data->base + reg->triminfo_ctrl);

        if (pdata->cal_mode == HW_MODE)
                goto skip_calib_data;

        /* Save trimming info in order to perform calibration */
        if (data->soc == SOC_ARCH_EXYNOS5440) {
                /*
                 * For exynos5440 soc triminfo value is swapped between TMU0 and
                 * TMU2, so the below logic is needed.
                 */
                switch (data->id) {
                case 0:
                        trim_info = readl(data->base +
                        EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
                        break;
                case 1:
                        trim_info = readl(data->base + reg->triminfo_data);
                        break;
                case 2:
                        trim_info = readl(data->base -
                        EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
                }
        } else {
                /* On exynos5420 the triminfo register is in the shared space */
                if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
                        trim_info = readl(data->base_second +
                                                        reg->triminfo_data);
                else
                        trim_info = readl(data->base + reg->triminfo_data);
        }
        data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
        data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
                                EXYNOS_TMU_TEMP_MASK);

        if (!data->temp_error1 ||
                (pdata->min_efuse_value > data->temp_error1) ||
                (data->temp_error1 > pdata->max_efuse_value))
                data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;

        if (!data->temp_error2)
                data->temp_error2 =
                        (pdata->efuse_value >> reg->triminfo_85_shift) &
                        EXYNOS_TMU_TEMP_MASK;

skip_calib_data:
        if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
                dev_err(&pdev->dev, "Invalid max trigger level\n");
                ret = -EINVAL;
                goto out;
        }

        for (i = 0; i < pdata->max_trigger_level; i++) {
                if (!pdata->trigger_levels[i])
                        continue;

                if ((pdata->trigger_type[i] == HW_TRIP) &&
                (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
                        dev_err(&pdev->dev, "Invalid hw trigger level\n");
                        ret = -EINVAL;
                        goto out;
                }

                /* Count trigger levels except the HW trip*/
                if (!(pdata->trigger_type[i] == HW_TRIP))
                        trigger_levs++;
        }

        rising_threshold = readl(data->base + reg->threshold_th0);

        if (data->soc == SOC_ARCH_EXYNOS4210) {
                /* Write temperature code for threshold */
                threshold_code = temp_to_code(data, pdata->threshold);
                if (threshold_code < 0) {
                        ret = threshold_code;
                        goto out;
                }
                writeb(threshold_code,
                        data->base + reg->threshold_temp);
                for (i = 0; i < trigger_levs; i++)
                        writeb(pdata->trigger_levels[i], data->base +
                        reg->threshold_th0 + i * sizeof(reg->threshold_th0));

                writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
        } else {
                /* Write temperature code for rising and falling threshold */
                for (i = 0;
                i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
                        threshold_code = temp_to_code(data,
                                                pdata->trigger_levels[i]);
                        if (threshold_code < 0) {
                                ret = threshold_code;
                                goto out;
                        }
                        rising_threshold &= ~(0xff << 8 * i);
                        rising_threshold |= threshold_code << 8 * i;
                        if (pdata->threshold_falling) {
                                threshold_code = temp_to_code(data,
                                                pdata->trigger_levels[i] -
                                                pdata->threshold_falling);
                                if (threshold_code > 0)
                                        falling_threshold |=
                                                threshold_code << 8 * i;
                        }
                }

                writel(rising_threshold,
                                data->base + reg->threshold_th0);
                writel(falling_threshold,
                                data->base + reg->threshold_th1);

                writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
                        (reg->intclr_fall_mask << reg->intclr_fall_shift),
                                data->base + reg->tmu_intclear);

                /* if last threshold limit is also present */
                i = pdata->max_trigger_level - 1;
                if (pdata->trigger_levels[i] &&
                                (pdata->trigger_type[i] == HW_TRIP)) {
                        threshold_code = temp_to_code(data,
                                                pdata->trigger_levels[i]);
                        if (threshold_code < 0) {
                                ret = threshold_code;
                                goto out;
                        }
                        if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
                                /* 1-4 level to be assigned in th0 reg */
                                rising_threshold &= ~(0xff << 8 * i);
                                rising_threshold |= threshold_code << 8 * i;
                                writel(rising_threshold,
                                        data->base + reg->threshold_th0);
                        } else if (i == EXYNOS_MAX_TRIGGER_PER_REG) {
                                /* 5th level to be assigned in th2 reg */
                                rising_threshold =
                                threshold_code << reg->threshold_th3_l0_shift;
                                writel(rising_threshold,
                                        data->base + reg->threshold_th2);
                        }
                        con = readl(data->base + reg->tmu_ctrl);
                        con |= (1 << reg->therm_trip_en_shift);
                        writel(con, data->base + reg->tmu_ctrl);
                }
        }
        /*Clear the PMIN in the common TMU register*/
        if (reg->tmu_pmin && !data->id)
                writel(0, data->base_second + reg->tmu_pmin);
out:
        clk_disable(data->clk);
        mutex_unlock(&data->lock);
        if (!IS_ERR(data->clk_sec))
                clk_disable(data->clk_sec);

        return ret;
}

static void exynos_tmu_control(struct platform_device *pdev, bool on)
{
        struct exynos_tmu_data *data = platform_get_drvdata(pdev);
        struct exynos_tmu_platform_data *pdata = data->pdata;
        const struct exynos_tmu_registers *reg = pdata->registers;
        unsigned int con, interrupt_en, cal_val;

        mutex_lock(&data->lock);
        clk_enable(data->clk);

        con = readl(data->base + reg->tmu_ctrl);

        if (pdata->test_mux)
                con |= (pdata->test_mux << reg->test_mux_addr_shift);

        if (pdata->reference_voltage) {
                con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
                con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
        }

        if (pdata->gain) {
                con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
                con |= (pdata->gain << reg->buf_slope_sel_shift);
        }

        if (pdata->noise_cancel_mode) {
                con &= ~(reg->therm_trip_mode_mask <<
                                        reg->therm_trip_mode_shift);
                con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
        }

        if (pdata->cal_mode == HW_MODE) {
                con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
                cal_val = 0;
                switch (pdata->cal_type) {
                case TYPE_TWO_POINT_TRIMMING:
                        cal_val = 3;
                        break;
                case TYPE_ONE_POINT_TRIMMING_85:
                        cal_val = 2;
                        break;
                case TYPE_ONE_POINT_TRIMMING_25:
                        cal_val = 1;
                        break;
                case TYPE_NONE:
                        break;
                default:
                        dev_err(&pdev->dev, "Invalid calibration type, using none\n");
                }
                con |= cal_val << reg->calib_mode_shift;
        }

        if (on) {
                con |= (1 << reg->core_en_shift);
                interrupt_en =
                        pdata->trigger_enable[3] << reg->inten_rise3_shift |
                        pdata->trigger_enable[2] << reg->inten_rise2_shift |
                        pdata->trigger_enable[1] << reg->inten_rise1_shift |
                        pdata->trigger_enable[0] << reg->inten_rise0_shift;
                if (TMU_SUPPORTS(pdata, FALLING_TRIP))
                        interrupt_en |=
                                interrupt_en << reg->inten_fall0_shift;
        } else {
                con &= ~(1 << reg->core_en_shift);
                interrupt_en = 0; /* Disable all interrupts */
        }
        writel(interrupt_en, data->base + reg->tmu_inten);
        writel(con, data->base + reg->tmu_ctrl);

        clk_disable(data->clk);
        mutex_unlock(&data->lock);
}

static int exynos_tmu_read(struct exynos_tmu_data *data)
{
        struct exynos_tmu_platform_data *pdata = data->pdata;
        const struct exynos_tmu_registers *reg = pdata->registers;
        u8 temp_code;
        int temp;

        mutex_lock(&data->lock);
        clk_enable(data->clk);

        temp_code = readb(data->base + reg->tmu_cur_temp);
        temp = code_to_temp(data, temp_code);

        clk_disable(data->clk);
        mutex_unlock(&data->lock);

        return temp;
}

#ifdef CONFIG_THERMAL_EMULATION
static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
{
        struct exynos_tmu_data *data = drv_data;
        struct exynos_tmu_platform_data *pdata = data->pdata;
        const struct exynos_tmu_registers *reg = pdata->registers;
        unsigned int val;
        int ret = -EINVAL;

        if (!TMU_SUPPORTS(pdata, EMULATION))
                goto out;

        if (temp && temp < MCELSIUS)
                goto out;

        mutex_lock(&data->lock);
        clk_enable(data->clk);

        val = readl(data->base + reg->emul_con);

        if (temp) {
                temp /= MCELSIUS;

                if (TMU_SUPPORTS(pdata, EMUL_TIME)) {
                        val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift);
                        val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
                }
                val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift);
                val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
                        EXYNOS_EMUL_ENABLE;
        } else {
                val &= ~EXYNOS_EMUL_ENABLE;
        }

        writel(val, data->base + reg->emul_con);

        clk_disable(data->clk);
        mutex_unlock(&data->lock);
        return 0;
out:
        return ret;
}
#else
static int exynos_tmu_set_emulation(void *drv_data,     unsigned long temp)
        { return -EINVAL; }
#endif/*CONFIG_THERMAL_EMULATION*/

static void exynos_tmu_work(struct work_struct *work)
{
        struct exynos_tmu_data *data = container_of(work,
                        struct exynos_tmu_data, irq_work);
        struct exynos_tmu_platform_data *pdata = data->pdata;
        const struct exynos_tmu_registers *reg = pdata->registers;
        unsigned int val_irq, val_type;

        if (!IS_ERR(data->clk_sec))
                clk_enable(data->clk_sec);
        /* Find which sensor generated this interrupt */
        if (reg->tmu_irqstatus) {
                val_type = readl(data->base_second + reg->tmu_irqstatus);
                if (!((val_type >> data->id) & 0x1))
                        goto out;
        }
        if (!IS_ERR(data->clk_sec))
                clk_disable(data->clk_sec);

        exynos_report_trigger(data->reg_conf);
        mutex_lock(&data->lock);
        clk_enable(data->clk);

        /* TODO: take action based on particular interrupt */
        val_irq = readl(data->base + reg->tmu_intstat);
        /* clear the interrupts */
        writel(val_irq, data->base + reg->tmu_intclear);

        clk_disable(data->clk);
        mutex_unlock(&data->lock);
out:
        enable_irq(data->irq);
}

static irqreturn_t exynos_tmu_irq(int irq, void *id)
{
        struct exynos_tmu_data *data = id;

        disable_irq_nosync(irq);
        schedule_work(&data->irq_work);

        return IRQ_HANDLED;
}

static const struct of_device_id exynos_tmu_match[] = {
        {
                .compatible = "samsung,exynos3250-tmu",
                .data = (void *)EXYNOS3250_TMU_DRV_DATA,
        },
        {
                .compatible = "samsung,exynos4210-tmu",
                .data = (void *)EXYNOS4210_TMU_DRV_DATA,
        },
        {
                .compatible = "samsung,exynos4412-tmu",
                .data = (void *)EXYNOS4412_TMU_DRV_DATA,
        },
        {
                .compatible = "samsung,exynos5250-tmu",
                .data = (void *)EXYNOS5250_TMU_DRV_DATA,
        },
        {
                .compatible = "samsung,exynos5260-tmu",
                .data = (void *)EXYNOS5260_TMU_DRV_DATA,
        },
        {
                .compatible = "samsung,exynos5420-tmu",
                .data = (void *)EXYNOS5420_TMU_DRV_DATA,
        },
        {
                .compatible = "samsung,exynos5420-tmu-ext-triminfo",
                .data = (void *)EXYNOS5420_TMU_DRV_DATA,
        },
        {
                .compatible = "samsung,exynos5440-tmu",
                .data = (void *)EXYNOS5440_TMU_DRV_DATA,
        },
        {},
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);

static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
                        struct platform_device *pdev, int id)
{
        struct  exynos_tmu_init_data *data_table;
        struct exynos_tmu_platform_data *tmu_data;
        const struct of_device_id *match;

        match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
        if (!match)
                return NULL;
        data_table = (struct exynos_tmu_init_data *) match->data;
        if (!data_table || id >= data_table->tmu_count)
                return NULL;
        tmu_data = data_table->tmu_data;
        return (struct exynos_tmu_platform_data *) (tmu_data + id);
}

static int exynos_map_dt_data(struct platform_device *pdev)
{
        struct exynos_tmu_data *data = platform_get_drvdata(pdev);
        struct exynos_tmu_platform_data *pdata;
        struct resource res;
        int ret;

        if (!data || !pdev->dev.of_node)
                return -ENODEV;

        /*
         * Try enabling the regulator if found
         * TODO: Add regulator as an SOC feature, so that regulator enable
         * is a compulsory call.
         */
        data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
        if (!IS_ERR(data->regulator)) {
                ret = regulator_enable(data->regulator);
                if (ret) {
                        dev_err(&pdev->dev, "failed to enable vtmu\n");
                        return ret;
                }
        } else {
                dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
        }

        data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
        if (data->id < 0)
                data->id = 0;

        data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
        if (data->irq <= 0) {
                dev_err(&pdev->dev, "failed to get IRQ\n");
                return -ENODEV;
        }

        if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
                dev_err(&pdev->dev, "failed to get Resource 0\n");
                return -ENODEV;
        }

        data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
        if (!data->base) {
                dev_err(&pdev->dev, "Failed to ioremap memory\n");
                return -EADDRNOTAVAIL;
        }

        pdata = exynos_get_driver_data(pdev, data->id);
        if (!pdata) {
                dev_err(&pdev->dev, "No platform init data supplied.\n");
                return -ENODEV;
        }
        data->pdata = pdata;
        /*
         * Check if the TMU shares some registers and then try to map the
         * memory of common registers.
         */
        if (!TMU_SUPPORTS(pdata, ADDRESS_MULTIPLE))
                return 0;

        if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
                dev_err(&pdev->dev, "failed to get Resource 1\n");
                return -ENODEV;
        }

        data->base_second = devm_ioremap(&pdev->dev, res.start,
                                        resource_size(&res));
        if (!data->base_second) {
                dev_err(&pdev->dev, "Failed to ioremap memory\n");
                return -ENOMEM;
        }

        return 0;
}

static int exynos_tmu_probe(struct platform_device *pdev)
{
        struct exynos_tmu_data *data;
        struct exynos_tmu_platform_data *pdata;
        struct thermal_sensor_conf *sensor_conf;
        int ret, i;

        data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
                                        GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        platform_set_drvdata(pdev, data);
        mutex_init(&data->lock);

        ret = exynos_map_dt_data(pdev);
        if (ret)
                return ret;

        pdata = data->pdata;

        INIT_WORK(&data->irq_work, exynos_tmu_work);

        data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
        if (IS_ERR(data->clk)) {
                dev_err(&pdev->dev, "Failed to get clock\n");
                return  PTR_ERR(data->clk);
        }

        data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
        if (IS_ERR(data->clk_sec)) {
                if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
                        dev_err(&pdev->dev, "Failed to get triminfo clock\n");
                        return PTR_ERR(data->clk_sec);
                }
        } else {
                ret = clk_prepare(data->clk_sec);
                if (ret) {
                        dev_err(&pdev->dev, "Failed to get clock\n");
                        return ret;
                }
        }

        ret = clk_prepare(data->clk);
        if (ret) {
                dev_err(&pdev->dev, "Failed to get clock\n");
                goto err_clk_sec;
        }

        if (pdata->type == SOC_ARCH_EXYNOS3250 ||
            pdata->type == SOC_ARCH_EXYNOS4210 ||
            pdata->type == SOC_ARCH_EXYNOS4412 ||
            pdata->type == SOC_ARCH_EXYNOS5250 ||
            pdata->type == SOC_ARCH_EXYNOS5260 ||
            pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO ||
            pdata->type == SOC_ARCH_EXYNOS5440)
                data->soc = pdata->type;
        else {
                ret = -EINVAL;
                dev_err(&pdev->dev, "Platform not supported\n");
                goto err_clk;
        }

        ret = exynos_tmu_initialize(pdev);
        if (ret) {
                dev_err(&pdev->dev, "Failed to initialize TMU\n");
                goto err_clk;
        }

        exynos_tmu_control(pdev, true);

        /* Allocate a structure to register with the exynos core thermal */
        sensor_conf = devm_kzalloc(&pdev->dev,
                                sizeof(struct thermal_sensor_conf), GFP_KERNEL);
        if (!sensor_conf) {
                ret = -ENOMEM;
                goto err_clk;
        }
        sprintf(sensor_conf->name, "therm_zone%d", data->id);
        sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
        sensor_conf->write_emul_temp =
                (int (*)(void *, unsigned long))exynos_tmu_set_emulation;
        sensor_conf->driver_data = data;
        sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
                        pdata->trigger_enable[1] + pdata->trigger_enable[2]+
                        pdata->trigger_enable[3];

        for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
                sensor_conf->trip_data.trip_val[i] =
                        pdata->threshold + pdata->trigger_levels[i];
                sensor_conf->trip_data.trip_type[i] =
                                        pdata->trigger_type[i];
        }

        sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;

        sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
        for (i = 0; i < pdata->freq_tab_count; i++) {
                sensor_conf->cooling_data.freq_data[i].freq_clip_max =
                                        pdata->freq_tab[i].freq_clip_max;
                sensor_conf->cooling_data.freq_data[i].temp_level =
                                        pdata->freq_tab[i].temp_level;
        }
        sensor_conf->dev = &pdev->dev;
        /* Register the sensor with thermal management interface */
        ret = exynos_register_thermal(sensor_conf);
        if (ret) {
                dev_err(&pdev->dev, "Failed to register thermal interface\n");
                goto err_clk;
        }
        data->reg_conf = sensor_conf;

        ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
                IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
        if (ret) {
                dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
                goto err_clk;
        }

        return 0;
err_clk:
        clk_unprepare(data->clk);
err_clk_sec:
        if (!IS_ERR(data->clk_sec))
                clk_unprepare(data->clk_sec);
        return ret;
}

static int exynos_tmu_remove(struct platform_device *pdev)
{
        struct exynos_tmu_data *data = platform_get_drvdata(pdev);

        exynos_unregister_thermal(data->reg_conf);

        exynos_tmu_control(pdev, false);

        clk_unprepare(data->clk);
        if (!IS_ERR(data->clk_sec))
                clk_unprepare(data->clk_sec);

        if (!IS_ERR(data->regulator))
                regulator_disable(data->regulator);

        return 0;
}

#ifdef CONFIG_PM_SLEEP
static int exynos_tmu_suspend(struct device *dev)
{
        exynos_tmu_control(to_platform_device(dev), false);

        return 0;
}

static int exynos_tmu_resume(struct device *dev)
{
        struct platform_device *pdev = to_platform_device(dev);

        exynos_tmu_initialize(pdev);
        exynos_tmu_control(pdev, true);

        return 0;
}

static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
                         exynos_tmu_suspend, exynos_tmu_resume);
#define EXYNOS_TMU_PM   (&exynos_tmu_pm)
#else
#define EXYNOS_TMU_PM   NULL
#endif

static struct platform_driver exynos_tmu_driver = {
        .driver = {
                .name   = "exynos-tmu",
                .owner  = THIS_MODULE,
                .pm     = EXYNOS_TMU_PM,
                .of_match_table = exynos_tmu_match,
        },
        .probe = exynos_tmu_probe,
        .remove = exynos_tmu_remove,
};

module_platform_driver(exynos_tmu_driver);

MODULE_DESCRIPTION("EXYNOS TMU Driver");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:exynos-tmu");