]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/tty/cyclades.c
projects / mirror_ubuntu-bionic-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
tty: Mark tty_del_file and __tty_hangup static
[mirror_ubuntu-bionic-kernel.git] / drivers / tty / cyclades.c
1 #undef BLOCKMOVE
2 #define Z_WAKE
3 #undef Z_EXT_CHARS_IN_BUFFER
4
5 /*
6 * This file contains the driver for the Cyclades async multiport
7 * serial boards.
8 *
9 * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
10 * Modified and maintained by Marcio Saito <marcio@cyclades.com>.
11 *
12 * Copyright (C) 2007-2009 Jiri Slaby <jirislaby@gmail.com>
13 *
14 * Much of the design and some of the code came from serial.c
15 * which was copyright (C) 1991, 1992 Linus Torvalds. It was
16 * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92,
17 * and then fixed as suggested by Michael K. Johnson 12/12/92.
18 * Converted to pci probing and cleaned up by Jiri Slaby.
19 *
20 */
21
22 #define CY_VERSION "2.6"
23
24 /* If you need to install more boards than NR_CARDS, change the constant
25 in the definition below. No other change is necessary to support up to
26 eight boards. Beyond that you'll have to extend cy_isa_addresses. */
27
28 #define NR_CARDS 4
29
30 /*
31 If the total number of ports is larger than NR_PORTS, change this
32 constant in the definition below. No other change is necessary to
33 support more boards/ports. */
34
35 #define NR_PORTS 256
36
37 #define ZO_V1 0
38 #define ZO_V2 1
39 #define ZE_V1 2
40
41 #define SERIAL_PARANOIA_CHECK
42 #undef CY_DEBUG_OPEN
43 #undef CY_DEBUG_THROTTLE
44 #undef CY_DEBUG_OTHER
45 #undef CY_DEBUG_IO
46 #undef CY_DEBUG_COUNT
47 #undef CY_DEBUG_DTR
48 #undef CY_DEBUG_INTERRUPTS
49 #undef CY_16Y_HACK
50 #undef CY_ENABLE_MONITORING
51 #undef CY_PCI_DEBUG
52
53 /*
54 * Include section
55 */
56 #include <linux/module.h>
57 #include <linux/errno.h>
58 #include <linux/signal.h>
59 #include <linux/sched.h>
60 #include <linux/timer.h>
61 #include <linux/interrupt.h>
62 #include <linux/tty.h>
63 #include <linux/tty_flip.h>
64 #include <linux/serial.h>
65 #include <linux/major.h>
66 #include <linux/string.h>
67 #include <linux/fcntl.h>
68 #include <linux/ptrace.h>
69 #include <linux/cyclades.h>
70 #include <linux/mm.h>
71 #include <linux/ioport.h>
72 #include <linux/init.h>
73 #include <linux/delay.h>
74 #include <linux/spinlock.h>
75 #include <linux/bitops.h>
76 #include <linux/firmware.h>
77 #include <linux/device.h>
78 #include <linux/slab.h>
79
80 #include <linux/io.h>
81 #include <linux/uaccess.h>
82
83 #include <linux/kernel.h>
84 #include <linux/pci.h>
85
86 #include <linux/stat.h>
87 #include <linux/proc_fs.h>
88 #include <linux/seq_file.h>
89
90 static void cy_send_xchar(struct tty_struct *tty, char ch);
91
92 #ifndef SERIAL_XMIT_SIZE
93 #define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096))
94 #endif
95
96 #define STD_COM_FLAGS (0)
97
98 /* firmware stuff */
99 #define ZL_MAX_BLOCKS 16
100 #define DRIVER_VERSION 0x02010203
101 #define RAM_SIZE 0x80000
102
103 enum zblock_type {
104 ZBLOCK_PRG = 0,
105 ZBLOCK_FPGA = 1
106 };
107
108 struct zfile_header {
109 char name[64];
110 char date[32];
111 char aux[32];
112 u32 n_config;
113 u32 config_offset;
114 u32 n_blocks;
115 u32 block_offset;
116 u32 reserved[9];
117 } __attribute__ ((packed));
118
119 struct zfile_config {
120 char name[64];
121 u32 mailbox;
122 u32 function;
123 u32 n_blocks;
124 u32 block_list[ZL_MAX_BLOCKS];
125 } __attribute__ ((packed));
126
127 struct zfile_block {
128 u32 type;
129 u32 file_offset;
130 u32 ram_offset;
131 u32 size;
132 } __attribute__ ((packed));
133
134 static struct tty_driver *cy_serial_driver;
135
136 #ifdef CONFIG_ISA
137 /* This is the address lookup table. The driver will probe for
138 Cyclom-Y/ISA boards at all addresses in here. If you want the
139 driver to probe addresses at a different address, add it to
140 this table. If the driver is probing some other board and
141 causing problems, remove the offending address from this table.
142 */
143
144 static unsigned int cy_isa_addresses[] = {
145 0xD0000,
146 0xD2000,
147 0xD4000,
148 0xD6000,
149 0xD8000,
150 0xDA000,
151 0xDC000,
152 0xDE000,
153 0, 0, 0, 0, 0, 0, 0, 0
154 };
155
156 #define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses)
157
158 static long maddr[NR_CARDS];
159 static int irq[NR_CARDS];
160
161 module_param_array(maddr, long, NULL, 0);
162 module_param_array(irq, int, NULL, 0);
163
164 #endif /* CONFIG_ISA */
165
166 /* This is the per-card data structure containing address, irq, number of
167 channels, etc. This driver supports a maximum of NR_CARDS cards.
168 */
169 static struct cyclades_card cy_card[NR_CARDS];
170
171 static int cy_next_channel; /* next minor available */
172
173 /*
174 * This is used to look up the divisor speeds and the timeouts
175 * We're normally limited to 15 distinct baud rates. The extra
176 * are accessed via settings in info->port.flags.
177 * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
178 * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
179 * HI VHI
180 * 20
181 */
182 static const int baud_table[] = {
183 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
184 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
185 230400, 0
186 };
187
188 static const char baud_co_25[] = { /* 25 MHz clock option table */
189 /* value => 00 01 02 03 04 */
190 /* divide by 8 32 128 512 2048 */
191 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
192 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
193 };
194
195 static const char baud_bpr_25[] = { /* 25 MHz baud rate period table */
196 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
197 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
198 };
199
200 static const char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */
201 /* value => 00 01 02 03 04 */
202 /* divide by 8 32 128 512 2048 */
203 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
204 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
205 0x00
206 };
207
208 static const char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */
209 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
210 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
211 0x21
212 };
213
214 static const char baud_cor3[] = { /* receive threshold */
215 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
216 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
217 0x07
218 };
219
220 /*
221 * The Cyclades driver implements HW flow control as any serial driver.
222 * The cyclades_port structure member rflow and the vector rflow_thr
223 * allows us to take advantage of a special feature in the CD1400 to avoid
224 * data loss even when the system interrupt latency is too high. These flags
225 * are to be used only with very special applications. Setting these flags
226 * requires the use of a special cable (DTR and RTS reversed). In the new
227 * CD1400-based boards (rev. 6.00 or later), there is no need for special
228 * cables.
229 */
230
231 static const char rflow_thr[] = { /* rflow threshold */
232 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
233 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
234 0x0a
235 };
236
237 /* The Cyclom-Ye has placed the sequential chips in non-sequential
238 * address order. This look-up table overcomes that problem.
239 */
240 static const unsigned int cy_chip_offset[] = { 0x0000,
241 0x0400,
242 0x0800,
243 0x0C00,
244 0x0200,
245 0x0600,
246 0x0A00,
247 0x0E00
248 };
249
250 /* PCI related definitions */
251
252 #ifdef CONFIG_PCI
253 static const struct pci_device_id cy_pci_dev_id[] = {
254 /* PCI < 1Mb */
255 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
256 /* PCI > 1Mb */
257 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) },
258 /* 4Y PCI < 1Mb */
259 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) },
260 /* 4Y PCI > 1Mb */
261 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) },
262 /* 8Y PCI < 1Mb */
263 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) },
264 /* 8Y PCI > 1Mb */
265 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) },
266 /* Z PCI < 1Mb */
267 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) },
268 /* Z PCI > 1Mb */
269 { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) },
270 { } /* end of table */
271 };
272 MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
273 #endif
274
275 static void cy_start(struct tty_struct *);
276 static void cy_set_line_char(struct cyclades_port *, struct tty_struct *);
277 static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
278 #ifdef CONFIG_ISA
279 static unsigned detect_isa_irq(void __iomem *);
280 #endif /* CONFIG_ISA */
281
282 #ifndef CONFIG_CYZ_INTR
283 static void cyz_poll(unsigned long);
284
285 /* The Cyclades-Z polling cycle is defined by this variable */
286 static long cyz_polling_cycle = CZ_DEF_POLL;
287
288 static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0);
289
290 #else /* CONFIG_CYZ_INTR */
291 static void cyz_rx_restart(unsigned long);
292 static struct timer_list cyz_rx_full_timer[NR_PORTS];
293 #endif /* CONFIG_CYZ_INTR */
294
295 static inline void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
296 {
297 struct cyclades_card *card = port->card;
298
299 cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val);
300 }
301
302 static inline u8 cyy_readb(struct cyclades_port *port, u32 reg)
303 {
304 struct cyclades_card *card = port->card;
305
306 return readb(port->u.cyy.base_addr + (reg << card->bus_index));
307 }
308
309 static inline bool cy_is_Z(struct cyclades_card *card)
310 {
311 return card->num_chips == (unsigned int)-1;
312 }
313
314 static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr)
315 {
316 return readl(&ctl_addr->init_ctrl) & (1 << 17);
317 }
318
319 static inline bool cyz_fpga_loaded(struct cyclades_card *card)
320 {
321 return __cyz_fpga_loaded(card->ctl_addr.p9060);
322 }
323
324 static inline bool cyz_is_loaded(struct cyclades_card *card)
325 {
326 struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS;
327
328 return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) &&
329 readl(&fw_id->signature) == ZFIRM_ID;
330 }
331
332 static inline int serial_paranoia_check(struct cyclades_port *info,
333 const char *name, const char *routine)
334 {
335 #ifdef SERIAL_PARANOIA_CHECK
336 if (!info) {
337 printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) "
338 "in %s\n", name, routine);
339 return 1;
340 }
341
342 if (info->magic != CYCLADES_MAGIC) {
343 printk(KERN_WARNING "cyc Warning: bad magic number for serial "
344 "struct (%s) in %s\n", name, routine);
345 return 1;
346 }
347 #endif
348 return 0;
349 }
350
351 /***********************************************************/
352 /********* Start of block of Cyclom-Y specific code ********/
353
354 /* This routine waits up to 1000 micro-seconds for the previous
355 command to the Cirrus chip to complete and then issues the
356 new command. An error is returned if the previous command
357 didn't finish within the time limit.
358
359 This function is only called from inside spinlock-protected code.
360 */
361 static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index)
362 {
363 void __iomem *ccr = base_addr + (CyCCR << index);
364 unsigned int i;
365
366 /* Check to see that the previous command has completed */
367 for (i = 0; i < 100; i++) {
368 if (readb(ccr) == 0)
369 break;
370 udelay(10L);
371 }
372 /* if the CCR never cleared, the previous command
373 didn't finish within the "reasonable time" */
374 if (i == 100)
375 return -1;
376
377 /* Issue the new command */
378 cy_writeb(ccr, cmd);
379
380 return 0;
381 }
382
383 static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd)
384 {
385 return __cyy_issue_cmd(port->u.cyy.base_addr, cmd,
386 port->card->bus_index);
387 }
388
389 #ifdef CONFIG_ISA
390 /* ISA interrupt detection code */
391 static unsigned detect_isa_irq(void __iomem *address)
392 {
393 int irq;
394 unsigned long irqs, flags;
395 int save_xir, save_car;
396 int index = 0; /* IRQ probing is only for ISA */
397
398 /* forget possible initially masked and pending IRQ */
399 irq = probe_irq_off(probe_irq_on());
400
401 /* Clear interrupts on the board first */
402 cy_writeb(address + (Cy_ClrIntr << index), 0);
403 /* Cy_ClrIntr is 0x1800 */
404
405 irqs = probe_irq_on();
406 /* Wait ... */
407 msleep(5);
408
409 /* Enable the Tx interrupts on the CD1400 */
410 local_irq_save(flags);
411 cy_writeb(address + (CyCAR << index), 0);
412 __cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
413
414 cy_writeb(address + (CyCAR << index), 0);
415 cy_writeb(address + (CySRER << index),
416 readb(address + (CySRER << index)) | CyTxRdy);
417 local_irq_restore(flags);
418
419 /* Wait ... */
420 msleep(5);
421
422 /* Check which interrupt is in use */
423 irq = probe_irq_off(irqs);
424
425 /* Clean up */
426 save_xir = (u_char) readb(address + (CyTIR << index));
427 save_car = readb(address + (CyCAR << index));
428 cy_writeb(address + (CyCAR << index), (save_xir & 0x3));
429 cy_writeb(address + (CySRER << index),
430 readb(address + (CySRER << index)) & ~CyTxRdy);
431 cy_writeb(address + (CyTIR << index), (save_xir & 0x3f));
432 cy_writeb(address + (CyCAR << index), (save_car));
433 cy_writeb(address + (Cy_ClrIntr << index), 0);
434 /* Cy_ClrIntr is 0x1800 */
435
436 return (irq > 0) ? irq : 0;
437 }
438 #endif /* CONFIG_ISA */
439
440 static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
441 void __iomem *base_addr)
442 {
443 struct cyclades_port *info;
444 struct tty_struct *tty;
445 int len, index = cinfo->bus_index;
446 u8 ivr, save_xir, channel, save_car, data, char_count;
447
448 #ifdef CY_DEBUG_INTERRUPTS
449 printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
450 #endif
451 /* determine the channel & change to that context */
452 save_xir = readb(base_addr + (CyRIR << index));
453 channel = save_xir & CyIRChannel;
454 info = &cinfo->ports[channel + chip * 4];
455 save_car = cyy_readb(info, CyCAR);
456 cyy_writeb(info, CyCAR, save_xir);
457 ivr = cyy_readb(info, CyRIVR) & CyIVRMask;
458
459 tty = tty_port_tty_get(&info->port);
460 /* if there is nowhere to put the data, discard it */
461 if (tty == NULL) {
462 if (ivr == CyIVRRxEx) { /* exception */
463 data = cyy_readb(info, CyRDSR);
464 } else { /* normal character reception */
465 char_count = cyy_readb(info, CyRDCR);
466 while (char_count--)
467 data = cyy_readb(info, CyRDSR);
468 }
469 goto end;
470 }
471 /* there is an open port for this data */
472 if (ivr == CyIVRRxEx) { /* exception */
473 data = cyy_readb(info, CyRDSR);
474
475 /* For statistics only */
476 if (data & CyBREAK)
477 info->icount.brk++;
478 else if (data & CyFRAME)
479 info->icount.frame++;
480 else if (data & CyPARITY)
481 info->icount.parity++;
482 else if (data & CyOVERRUN)
483 info->icount.overrun++;
484
485 if (data & info->ignore_status_mask) {
486 info->icount.rx++;
487 tty_kref_put(tty);
488 return;
489 }
490 if (tty_buffer_request_room(tty, 1)) {
491 if (data & info->read_status_mask) {
492 if (data & CyBREAK) {
493 tty_insert_flip_char(tty,
494 cyy_readb(info, CyRDSR),
495 TTY_BREAK);
496 info->icount.rx++;
497 if (info->port.flags & ASYNC_SAK)
498 do_SAK(tty);
499 } else if (data & CyFRAME) {
500 tty_insert_flip_char(tty,
501 cyy_readb(info, CyRDSR),
502 TTY_FRAME);
503 info->icount.rx++;
504 info->idle_stats.frame_errs++;
505 } else if (data & CyPARITY) {
506 /* Pieces of seven... */
507 tty_insert_flip_char(tty,
508 cyy_readb(info, CyRDSR),
509 TTY_PARITY);
510 info->icount.rx++;
511 info->idle_stats.parity_errs++;
512 } else if (data & CyOVERRUN) {
513 tty_insert_flip_char(tty, 0,
514 TTY_OVERRUN);
515 info->icount.rx++;
516 /* If the flip buffer itself is
517 overflowing, we still lose
518 the next incoming character.
519 */
520 tty_insert_flip_char(tty,
521 cyy_readb(info, CyRDSR),
522 TTY_FRAME);
523 info->icount.rx++;
524 info->idle_stats.overruns++;
525 /* These two conditions may imply */
526 /* a normal read should be done. */
527 /* } else if(data & CyTIMEOUT) { */
528 /* } else if(data & CySPECHAR) { */
529 } else {
530 tty_insert_flip_char(tty, 0,
531 TTY_NORMAL);
532 info->icount.rx++;
533 }
534 } else {
535 tty_insert_flip_char(tty, 0, TTY_NORMAL);
536 info->icount.rx++;
537 }
538 } else {
539 /* there was a software buffer overrun and nothing
540 * could be done about it!!! */
541 info->icount.buf_overrun++;
542 info->idle_stats.overruns++;
543 }
544 } else { /* normal character reception */
545 /* load # chars available from the chip */
546 char_count = cyy_readb(info, CyRDCR);
547
548 #ifdef CY_ENABLE_MONITORING
549 ++info->mon.int_count;
550 info->mon.char_count += char_count;
551 if (char_count > info->mon.char_max)
552 info->mon.char_max = char_count;
553 info->mon.char_last = char_count;
554 #endif
555 len = tty_buffer_request_room(tty, char_count);
556 while (len--) {
557 data = cyy_readb(info, CyRDSR);
558 tty_insert_flip_char(tty, data, TTY_NORMAL);
559 info->idle_stats.recv_bytes++;
560 info->icount.rx++;
561 #ifdef CY_16Y_HACK
562 udelay(10L);
563 #endif
564 }
565 info->idle_stats.recv_idle = jiffies;
566 }
567 tty_schedule_flip(tty);
568 tty_kref_put(tty);
569 end:
570 /* end of service */
571 cyy_writeb(info, CyRIR, save_xir & 0x3f);
572 cyy_writeb(info, CyCAR, save_car);
573 }
574
575 static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
576 void __iomem *base_addr)
577 {
578 struct cyclades_port *info;
579 struct tty_struct *tty;
580 int char_count, index = cinfo->bus_index;
581 u8 save_xir, channel, save_car, outch;
582
583 /* Since we only get here when the transmit buffer
584 is empty, we know we can always stuff a dozen
585 characters. */
586 #ifdef CY_DEBUG_INTERRUPTS
587 printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip);
588 #endif
589
590 /* determine the channel & change to that context */
591 save_xir = readb(base_addr + (CyTIR << index));
592 channel = save_xir & CyIRChannel;
593 save_car = readb(base_addr + (CyCAR << index));
594 cy_writeb(base_addr + (CyCAR << index), save_xir);
595
596 info = &cinfo->ports[channel + chip * 4];
597 tty = tty_port_tty_get(&info->port);
598 if (tty == NULL) {
599 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
600 goto end;
601 }
602
603 /* load the on-chip space for outbound data */
604 char_count = info->xmit_fifo_size;
605
606 if (info->x_char) { /* send special char */
607 outch = info->x_char;
608 cyy_writeb(info, CyTDR, outch);
609 char_count--;
610 info->icount.tx++;
611 info->x_char = 0;
612 }
613
614 if (info->breakon || info->breakoff) {
615 if (info->breakon) {
616 cyy_writeb(info, CyTDR, 0);
617 cyy_writeb(info, CyTDR, 0x81);
618 info->breakon = 0;
619 char_count -= 2;
620 }
621 if (info->breakoff) {
622 cyy_writeb(info, CyTDR, 0);
623 cyy_writeb(info, CyTDR, 0x83);
624 info->breakoff = 0;
625 char_count -= 2;
626 }
627 }
628
629 while (char_count-- > 0) {
630 if (!info->xmit_cnt) {
631 if (cyy_readb(info, CySRER) & CyTxMpty) {
632 cyy_writeb(info, CySRER,
633 cyy_readb(info, CySRER) & ~CyTxMpty);
634 } else {
635 cyy_writeb(info, CySRER, CyTxMpty |
636 (cyy_readb(info, CySRER) & ~CyTxRdy));
637 }
638 goto done;
639 }
640 if (info->port.xmit_buf == NULL) {
641 cyy_writeb(info, CySRER,
642 cyy_readb(info, CySRER) & ~CyTxRdy);
643 goto done;
644 }
645 if (tty->stopped || tty->hw_stopped) {
646 cyy_writeb(info, CySRER,
647 cyy_readb(info, CySRER) & ~CyTxRdy);
648 goto done;
649 }
650 /* Because the Embedded Transmit Commands have been enabled,
651 * we must check to see if the escape character, NULL, is being
652 * sent. If it is, we must ensure that there is room for it to
653 * be doubled in the output stream. Therefore we no longer
654 * advance the pointer when the character is fetched, but
655 * rather wait until after the check for a NULL output
656 * character. This is necessary because there may not be room
657 * for the two chars needed to send a NULL.)
658 */
659 outch = info->port.xmit_buf[info->xmit_tail];
660 if (outch) {
661 info->xmit_cnt--;
662 info->xmit_tail = (info->xmit_tail + 1) &
663 (SERIAL_XMIT_SIZE - 1);
664 cyy_writeb(info, CyTDR, outch);
665 info->icount.tx++;
666 } else {
667 if (char_count > 1) {
668 info->xmit_cnt--;
669 info->xmit_tail = (info->xmit_tail + 1) &
670 (SERIAL_XMIT_SIZE - 1);
671 cyy_writeb(info, CyTDR, outch);
672 cyy_writeb(info, CyTDR, 0);
673 info->icount.tx++;
674 char_count--;
675 }
676 }
677 }
678
679 done:
680 tty_wakeup(tty);
681 tty_kref_put(tty);
682 end:
683 /* end of service */
684 cyy_writeb(info, CyTIR, save_xir & 0x3f);
685 cyy_writeb(info, CyCAR, save_car);
686 }
687
688 static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
689 void __iomem *base_addr)
690 {
691 struct cyclades_port *info;
692 struct tty_struct *tty;
693 int index = cinfo->bus_index;
694 u8 save_xir, channel, save_car, mdm_change, mdm_status;
695
696 /* determine the channel & change to that context */
697 save_xir = readb(base_addr + (CyMIR << index));
698 channel = save_xir & CyIRChannel;
699 info = &cinfo->ports[channel + chip * 4];
700 save_car = cyy_readb(info, CyCAR);
701 cyy_writeb(info, CyCAR, save_xir);
702
703 mdm_change = cyy_readb(info, CyMISR);
704 mdm_status = cyy_readb(info, CyMSVR1);
705
706 tty = tty_port_tty_get(&info->port);
707 if (!tty)
708 goto end;
709
710 if (mdm_change & CyANY_DELTA) {
711 /* For statistics only */
712 if (mdm_change & CyDCD)
713 info->icount.dcd++;
714 if (mdm_change & CyCTS)
715 info->icount.cts++;
716 if (mdm_change & CyDSR)
717 info->icount.dsr++;
718 if (mdm_change & CyRI)
719 info->icount.rng++;
720
721 wake_up_interruptible(&info->port.delta_msr_wait);
722 }
723
724 if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
725 if (mdm_status & CyDCD)
726 wake_up_interruptible(&info->port.open_wait);
727 else
728 tty_hangup(tty);
729 }
730 if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) {
731 if (tty->hw_stopped) {
732 if (mdm_status & CyCTS) {
733 /* cy_start isn't used
734 because... !!! */
735 tty->hw_stopped = 0;
736 cyy_writeb(info, CySRER,
737 cyy_readb(info, CySRER) | CyTxRdy);
738 tty_wakeup(tty);
739 }
740 } else {
741 if (!(mdm_status & CyCTS)) {
742 /* cy_stop isn't used
743 because ... !!! */
744 tty->hw_stopped = 1;
745 cyy_writeb(info, CySRER,
746 cyy_readb(info, CySRER) & ~CyTxRdy);
747 }
748 }
749 }
750 /* if (mdm_change & CyDSR) {
751 }
752 if (mdm_change & CyRI) {
753 }*/
754 tty_kref_put(tty);
755 end:
756 /* end of service */
757 cyy_writeb(info, CyMIR, save_xir & 0x3f);
758 cyy_writeb(info, CyCAR, save_car);
759 }
760
761 /* The real interrupt service routine is called
762 whenever the card wants its hand held--chars
763 received, out buffer empty, modem change, etc.
764 */
765 static irqreturn_t cyy_interrupt(int irq, void *dev_id)
766 {
767 int status;
768 struct cyclades_card *cinfo = dev_id;
769 void __iomem *base_addr, *card_base_addr;
770 unsigned int chip, too_many, had_work;
771 int index;
772
773 if (unlikely(cinfo == NULL)) {
774 #ifdef CY_DEBUG_INTERRUPTS
775 printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",
776 irq);
777 #endif
778 return IRQ_NONE; /* spurious interrupt */
779 }
780
781 card_base_addr = cinfo->base_addr;
782 index = cinfo->bus_index;
783
784 /* card was not initialized yet (e.g. DEBUG_SHIRQ) */
785 if (unlikely(card_base_addr == NULL))
786 return IRQ_HANDLED;
787
788 /* This loop checks all chips in the card. Make a note whenever
789 _any_ chip had some work to do, as this is considered an
790 indication that there will be more to do. Only when no chip
791 has any work does this outermost loop exit.
792 */
793 do {
794 had_work = 0;
795 for (chip = 0; chip < cinfo->num_chips; chip++) {
796 base_addr = cinfo->base_addr +
797 (cy_chip_offset[chip] << index);
798 too_many = 0;
799 while ((status = readb(base_addr +
800 (CySVRR << index))) != 0x00) {
801 had_work++;
802 /* The purpose of the following test is to ensure that
803 no chip can monopolize the driver. This forces the
804 chips to be checked in a round-robin fashion (after
805 draining each of a bunch (1000) of characters).
806 */
807 if (1000 < too_many++)
808 break;
809 spin_lock(&cinfo->card_lock);
810 if (status & CySRReceive) /* rx intr */
811 cyy_chip_rx(cinfo, chip, base_addr);
812 if (status & CySRTransmit) /* tx intr */
813 cyy_chip_tx(cinfo, chip, base_addr);
814 if (status & CySRModem) /* modem intr */
815 cyy_chip_modem(cinfo, chip, base_addr);
816 spin_unlock(&cinfo->card_lock);
817 }
818 }
819 } while (had_work);
820
821 /* clear interrupts */
822 spin_lock(&cinfo->card_lock);
823 cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0);
824 /* Cy_ClrIntr is 0x1800 */
825 spin_unlock(&cinfo->card_lock);
826 return IRQ_HANDLED;
827 } /* cyy_interrupt */
828
829 static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
830 unsigned int clear)
831 {
832 struct cyclades_card *card = info->card;
833 int channel = info->line - card->first_line;
834 u32 rts, dtr, msvrr, msvrd;
835
836 channel &= 0x03;
837
838 if (info->rtsdtr_inv) {
839 msvrr = CyMSVR2;
840 msvrd = CyMSVR1;
841 rts = CyDTR;
842 dtr = CyRTS;
843 } else {
844 msvrr = CyMSVR1;
845 msvrd = CyMSVR2;
846 rts = CyRTS;
847 dtr = CyDTR;
848 }
849 if (set & TIOCM_RTS) {
850 cyy_writeb(info, CyCAR, channel);
851 cyy_writeb(info, msvrr, rts);
852 }
853 if (clear & TIOCM_RTS) {
854 cyy_writeb(info, CyCAR, channel);
855 cyy_writeb(info, msvrr, ~rts);
856 }
857 if (set & TIOCM_DTR) {
858 cyy_writeb(info, CyCAR, channel);
859 cyy_writeb(info, msvrd, dtr);
860 #ifdef CY_DEBUG_DTR
861 printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
862 printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
863 cyy_readb(info, CyMSVR1),
864 cyy_readb(info, CyMSVR2));
865 #endif
866 }
867 if (clear & TIOCM_DTR) {
868 cyy_writeb(info, CyCAR, channel);
869 cyy_writeb(info, msvrd, ~dtr);
870 #ifdef CY_DEBUG_DTR
871 printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
872 printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
873 cyy_readb(info, CyMSVR1),
874 cyy_readb(info, CyMSVR2));
875 #endif
876 }
877 }
878
879 /***********************************************************/
880 /********* End of block of Cyclom-Y specific code **********/
881 /******** Start of block of Cyclades-Z specific code *******/
882 /***********************************************************/
883
884 static int
885 cyz_fetch_msg(struct cyclades_card *cinfo,
886 __u32 *channel, __u8 *cmd, __u32 *param)
887 {
888 struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
889 unsigned long loc_doorbell;
890
891 loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
892 if (loc_doorbell) {
893 *cmd = (char)(0xff & loc_doorbell);
894 *channel = readl(&board_ctrl->fwcmd_channel);
895 *param = (__u32) readl(&board_ctrl->fwcmd_param);
896 cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff);
897 return 1;
898 }
899 return 0;
900 } /* cyz_fetch_msg */
901
902 static int
903 cyz_issue_cmd(struct cyclades_card *cinfo,
904 __u32 channel, __u8 cmd, __u32 param)
905 {
906 struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
907 __u32 __iomem *pci_doorbell;
908 unsigned int index;
909
910 if (!cyz_is_loaded(cinfo))
911 return -1;
912
913 index = 0;
914 pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
915 while ((readl(pci_doorbell) & 0xff) != 0) {
916 if (index++ == 1000)
917 return (int)(readl(pci_doorbell) & 0xff);
918 udelay(50L);
919 }
920 cy_writel(&board_ctrl->hcmd_channel, channel);
921 cy_writel(&board_ctrl->hcmd_param, param);
922 cy_writel(pci_doorbell, (long)cmd);
923
924 return 0;
925 } /* cyz_issue_cmd */
926
927 static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty)
928 {
929 struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
930 struct cyclades_card *cinfo = info->card;
931 unsigned int char_count;
932 int len;
933 #ifdef BLOCKMOVE
934 unsigned char *buf;
935 #else
936 char data;
937 #endif
938 __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr;
939
940 rx_get = new_rx_get = readl(&buf_ctrl->rx_get);
941 rx_put = readl(&buf_ctrl->rx_put);
942 rx_bufsize = readl(&buf_ctrl->rx_bufsize);
943 rx_bufaddr = readl(&buf_ctrl->rx_bufaddr);
944 if (rx_put >= rx_get)
945 char_count = rx_put - rx_get;
946 else
947 char_count = rx_put - rx_get + rx_bufsize;
948
949 if (char_count) {
950 #ifdef CY_ENABLE_MONITORING
951 info->mon.int_count++;
952 info->mon.char_count += char_count;
953 if (char_count > info->mon.char_max)
954 info->mon.char_max = char_count;
955 info->mon.char_last = char_count;
956 #endif
957 if (tty == NULL) {
958 /* flush received characters */
959 new_rx_get = (new_rx_get + char_count) &
960 (rx_bufsize - 1);
961 info->rflush_count++;
962 } else {
963 #ifdef BLOCKMOVE
964 /* we'd like to use memcpy(t, f, n) and memset(s, c, count)
965 for performance, but because of buffer boundaries, there
966 may be several steps to the operation */
967 while (1) {
968 len = tty_prepare_flip_string(tty, &buf,
969 char_count);
970 if (!len)
971 break;
972
973 len = min_t(unsigned int, min(len, char_count),
974 rx_bufsize - new_rx_get);
975
976 memcpy_fromio(buf, cinfo->base_addr +
977 rx_bufaddr + new_rx_get, len);
978
979 new_rx_get = (new_rx_get + len) &
980 (rx_bufsize - 1);
981 char_count -= len;
982 info->icount.rx += len;
983 info->idle_stats.recv_bytes += len;
984 }
985 #else
986 len = tty_buffer_request_room(tty, char_count);
987 while (len--) {
988 data = readb(cinfo->base_addr + rx_bufaddr +
989 new_rx_get);
990 new_rx_get = (new_rx_get + 1) &
991 (rx_bufsize - 1);
992 tty_insert_flip_char(tty, data, TTY_NORMAL);
993 info->idle_stats.recv_bytes++;
994 info->icount.rx++;
995 }
996 #endif
997 #ifdef CONFIG_CYZ_INTR
998 /* Recalculate the number of chars in the RX buffer and issue
999 a cmd in case it's higher than the RX high water mark */
1000 rx_put = readl(&buf_ctrl->rx_put);
1001 if (rx_put >= rx_get)
1002 char_count = rx_put - rx_get;
1003 else
1004 char_count = rx_put - rx_get + rx_bufsize;
1005 if (char_count >= readl(&buf_ctrl->rx_threshold) &&
1006 !timer_pending(&cyz_rx_full_timer[
1007 info->line]))
1008 mod_timer(&cyz_rx_full_timer[info->line],
1009 jiffies + 1);
1010 #endif
1011 info->idle_stats.recv_idle = jiffies;
1012 tty_schedule_flip(tty);
1013 }
1014 /* Update rx_get */
1015 cy_writel(&buf_ctrl->rx_get, new_rx_get);
1016 }
1017 }
1018
1019 static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty)
1020 {
1021 struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
1022 struct cyclades_card *cinfo = info->card;
1023 u8 data;
1024 unsigned int char_count;
1025 #ifdef BLOCKMOVE
1026 int small_count;
1027 #endif
1028 __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr;
1029
1030 if (info->xmit_cnt <= 0) /* Nothing to transmit */
1031 return;
1032
1033 tx_get = readl(&buf_ctrl->tx_get);
1034 tx_put = readl(&buf_ctrl->tx_put);
1035 tx_bufsize = readl(&buf_ctrl->tx_bufsize);
1036 tx_bufaddr = readl(&buf_ctrl->tx_bufaddr);
1037 if (tx_put >= tx_get)
1038 char_count = tx_get - tx_put - 1 + tx_bufsize;
1039 else
1040 char_count = tx_get - tx_put - 1;
1041
1042 if (char_count) {
1043
1044 if (tty == NULL)
1045 goto ztxdone;
1046
1047 if (info->x_char) { /* send special char */
1048 data = info->x_char;
1049
1050 cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
1051 tx_put = (tx_put + 1) & (tx_bufsize - 1);
1052 info->x_char = 0;
1053 char_count--;
1054 info->icount.tx++;
1055 }
1056 #ifdef BLOCKMOVE
1057 while (0 < (small_count = min_t(unsigned int,
1058 tx_bufsize - tx_put, min_t(unsigned int,
1059 (SERIAL_XMIT_SIZE - info->xmit_tail),
1060 min_t(unsigned int, info->xmit_cnt,
1061 char_count))))) {
1062
1063 memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr +
1064 tx_put),
1065 &info->port.xmit_buf[info->xmit_tail],
1066 small_count);
1067
1068 tx_put = (tx_put + small_count) & (tx_bufsize - 1);
1069 char_count -= small_count;
1070 info->icount.tx += small_count;
1071 info->xmit_cnt -= small_count;
1072 info->xmit_tail = (info->xmit_tail + small_count) &
1073 (SERIAL_XMIT_SIZE - 1);
1074 }
1075 #else
1076 while (info->xmit_cnt && char_count) {
1077 data = info->port.xmit_buf[info->xmit_tail];
1078 info->xmit_cnt--;
1079 info->xmit_tail = (info->xmit_tail + 1) &
1080 (SERIAL_XMIT_SIZE - 1);
1081
1082 cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
1083 tx_put = (tx_put + 1) & (tx_bufsize - 1);
1084 char_count--;
1085 info->icount.tx++;
1086 }
1087 #endif
1088 tty_wakeup(tty);
1089 ztxdone:
1090 /* Update tx_put */
1091 cy_writel(&buf_ctrl->tx_put, tx_put);
1092 }
1093 }
1094
1095 static void cyz_handle_cmd(struct cyclades_card *cinfo)
1096 {
1097 struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
1098 struct tty_struct *tty;
1099 struct cyclades_port *info;
1100 __u32 channel, param, fw_ver;
1101 __u8 cmd;
1102 int special_count;
1103 int delta_count;
1104
1105 fw_ver = readl(&board_ctrl->fw_version);
1106
1107 while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
1108 special_count = 0;
1109 delta_count = 0;
1110 info = &cinfo->ports[channel];
1111 tty = tty_port_tty_get(&info->port);
1112 if (tty == NULL)
1113 continue;
1114
1115 switch (cmd) {
1116 case C_CM_PR_ERROR:
1117 tty_insert_flip_char(tty, 0, TTY_PARITY);
1118 info->icount.rx++;
1119 special_count++;
1120 break;
1121 case C_CM_FR_ERROR:
1122 tty_insert_flip_char(tty, 0, TTY_FRAME);
1123 info->icount.rx++;
1124 special_count++;
1125 break;
1126 case C_CM_RXBRK:
1127 tty_insert_flip_char(tty, 0, TTY_BREAK);
1128 info->icount.rx++;
1129 special_count++;
1130 break;
1131 case C_CM_MDCD:
1132 info->icount.dcd++;
1133 delta_count++;
1134 if (info->port.flags & ASYNC_CHECK_CD) {
1135 u32 dcd = fw_ver > 241 ? param :
1136 readl(&info->u.cyz.ch_ctrl->rs_status);
1137 if (dcd & C_RS_DCD)
1138 wake_up_interruptible(&info->port.open_wait);
1139 else
1140 tty_hangup(tty);
1141 }
1142 break;
1143 case C_CM_MCTS:
1144 info->icount.cts++;
1145 delta_count++;
1146 break;
1147 case C_CM_MRI:
1148 info->icount.rng++;
1149 delta_count++;
1150 break;
1151 case C_CM_MDSR:
1152 info->icount.dsr++;
1153 delta_count++;
1154 break;
1155 #ifdef Z_WAKE
1156 case C_CM_IOCTLW:
1157 complete(&info->shutdown_wait);
1158 break;
1159 #endif
1160 #ifdef CONFIG_CYZ_INTR
1161 case C_CM_RXHIWM:
1162 case C_CM_RXNNDT:
1163 case C_CM_INTBACK2:
1164 /* Reception Interrupt */
1165 #ifdef CY_DEBUG_INTERRUPTS
1166 printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
1167 "port %ld\n", info->card, channel);
1168 #endif
1169 cyz_handle_rx(info, tty);
1170 break;
1171 case C_CM_TXBEMPTY:
1172 case C_CM_TXLOWWM:
1173 case C_CM_INTBACK:
1174 /* Transmission Interrupt */
1175 #ifdef CY_DEBUG_INTERRUPTS
1176 printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
1177 "port %ld\n", info->card, channel);
1178 #endif
1179 cyz_handle_tx(info, tty);
1180 break;
1181 #endif /* CONFIG_CYZ_INTR */
1182 case C_CM_FATAL:
1183 /* should do something with this !!! */
1184 break;
1185 default:
1186 break;
1187 }
1188 if (delta_count)
1189 wake_up_interruptible(&info->port.delta_msr_wait);
1190 if (special_count)
1191 tty_schedule_flip(tty);
1192 tty_kref_put(tty);
1193 }
1194 }
1195
1196 #ifdef CONFIG_CYZ_INTR
1197 static irqreturn_t cyz_interrupt(int irq, void *dev_id)
1198 {
1199 struct cyclades_card *cinfo = dev_id;
1200
1201 if (unlikely(!cyz_is_loaded(cinfo))) {
1202 #ifdef CY_DEBUG_INTERRUPTS
1203 printk(KERN_DEBUG "cyz_interrupt: board not yet loaded "
1204 "(IRQ%d).\n", irq);
1205 #endif
1206 return IRQ_NONE;
1207 }
1208
1209 /* Handle the interrupts */
1210 cyz_handle_cmd(cinfo);
1211
1212 return IRQ_HANDLED;
1213 } /* cyz_interrupt */
1214
1215 static void cyz_rx_restart(unsigned long arg)
1216 {
1217 struct cyclades_port *info = (struct cyclades_port *)arg;
1218 struct cyclades_card *card = info->card;
1219 int retval;
1220 __u32 channel = info->line - card->first_line;
1221 unsigned long flags;
1222
1223 spin_lock_irqsave(&card->card_lock, flags);
1224 retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L);
1225 if (retval != 0) {
1226 printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n",
1227 info->line, retval);
1228 }
1229 spin_unlock_irqrestore(&card->card_lock, flags);
1230 }
1231
1232 #else /* CONFIG_CYZ_INTR */
1233
1234 static void cyz_poll(unsigned long arg)
1235 {
1236 struct cyclades_card *cinfo;
1237 struct cyclades_port *info;
1238 unsigned long expires = jiffies + HZ;
1239 unsigned int port, card;
1240
1241 for (card = 0; card < NR_CARDS; card++) {
1242 cinfo = &cy_card[card];
1243
1244 if (!cy_is_Z(cinfo))
1245 continue;
1246 if (!cyz_is_loaded(cinfo))
1247 continue;
1248
1249 /* Skip first polling cycle to avoid racing conditions with the FW */
1250 if (!cinfo->intr_enabled) {
1251 cinfo->intr_enabled = 1;
1252 continue;
1253 }
1254
1255 cyz_handle_cmd(cinfo);
1256
1257 for (port = 0; port < cinfo->nports; port++) {
1258 struct tty_struct *tty;
1259
1260 info = &cinfo->ports[port];
1261 tty = tty_port_tty_get(&info->port);
1262 /* OK to pass NULL to the handle functions below.
1263 They need to drop the data in that case. */
1264
1265 if (!info->throttle)
1266 cyz_handle_rx(info, tty);
1267 cyz_handle_tx(info, tty);
1268 tty_kref_put(tty);
1269 }
1270 /* poll every 'cyz_polling_cycle' period */
1271 expires = jiffies + cyz_polling_cycle;
1272 }
1273 mod_timer(&cyz_timerlist, expires);
1274 } /* cyz_poll */
1275
1276 #endif /* CONFIG_CYZ_INTR */
1277
1278 /********** End of block of Cyclades-Z specific code *********/
1279 /***********************************************************/
1280
1281 /* This is called whenever a port becomes active;
1282 interrupts are enabled and DTR & RTS are turned on.
1283 */
1284 static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
1285 {
1286 struct cyclades_card *card;
1287 unsigned long flags;
1288 int retval = 0;
1289 int channel;
1290 unsigned long page;
1291
1292 card = info->card;
1293 channel = info->line - card->first_line;
1294
1295 page = get_zeroed_page(GFP_KERNEL);
1296 if (!page)
1297 return -ENOMEM;
1298
1299 spin_lock_irqsave(&card->card_lock, flags);
1300
1301 if (info->port.flags & ASYNC_INITIALIZED)
1302 goto errout;
1303
1304 if (!info->type) {
1305 set_bit(TTY_IO_ERROR, &tty->flags);
1306 goto errout;
1307 }
1308
1309 if (info->port.xmit_buf)
1310 free_page(page);
1311 else
1312 info->port.xmit_buf = (unsigned char *)page;
1313
1314 spin_unlock_irqrestore(&card->card_lock, flags);
1315
1316 cy_set_line_char(info, tty);
1317
1318 if (!cy_is_Z(card)) {
1319 channel &= 0x03;
1320
1321 spin_lock_irqsave(&card->card_lock, flags);
1322
1323 cyy_writeb(info, CyCAR, channel);
1324
1325 cyy_writeb(info, CyRTPR,
1326 (info->default_timeout ? info->default_timeout : 0x02));
1327 /* 10ms rx timeout */
1328
1329 cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR);
1330
1331 cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
1332
1333 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData);
1334 } else {
1335 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
1336
1337 if (!cyz_is_loaded(card))
1338 return -ENODEV;
1339
1340 #ifdef CY_DEBUG_OPEN
1341 printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
1342 "base_addr %p\n", card, channel, card->base_addr);
1343 #endif
1344 spin_lock_irqsave(&card->card_lock, flags);
1345
1346 cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE);
1347 #ifdef Z_WAKE
1348 #ifdef CONFIG_CYZ_INTR
1349 cy_writel(&ch_ctrl->intr_enable,
1350 C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
1351 C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
1352 #else
1353 cy_writel(&ch_ctrl->intr_enable,
1354 C_IN_IOCTLW | C_IN_MDCD);
1355 #endif /* CONFIG_CYZ_INTR */
1356 #else
1357 #ifdef CONFIG_CYZ_INTR
1358 cy_writel(&ch_ctrl->intr_enable,
1359 C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
1360 C_IN_RXNNDT | C_IN_MDCD);
1361 #else
1362 cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD);
1363 #endif /* CONFIG_CYZ_INTR */
1364 #endif /* Z_WAKE */
1365
1366 retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L);
1367 if (retval != 0) {
1368 printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was "
1369 "%x\n", info->line, retval);
1370 }
1371
1372 /* Flush RX buffers before raising DTR and RTS */
1373 retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L);
1374 if (retval != 0) {
1375 printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was "
1376 "%x\n", info->line, retval);
1377 }
1378
1379 /* set timeout !!! */
1380 /* set RTS and DTR !!! */
1381 tty_port_raise_dtr_rts(&info->port);
1382
1383 /* enable send, recv, modem !!! */
1384 }
1385
1386 info->port.flags |= ASYNC_INITIALIZED;
1387
1388 clear_bit(TTY_IO_ERROR, &tty->flags);
1389 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1390 info->breakon = info->breakoff = 0;
1391 memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
1392 info->idle_stats.in_use =
1393 info->idle_stats.recv_idle =
1394 info->idle_stats.xmit_idle = jiffies;
1395
1396 spin_unlock_irqrestore(&card->card_lock, flags);
1397
1398 #ifdef CY_DEBUG_OPEN
1399 printk(KERN_DEBUG "cyc startup done\n");
1400 #endif
1401 return 0;
1402
1403 errout:
1404 spin_unlock_irqrestore(&card->card_lock, flags);
1405 free_page(page);
1406 return retval;
1407 } /* startup */
1408
1409 static void start_xmit(struct cyclades_port *info)
1410 {
1411 struct cyclades_card *card = info->card;
1412 unsigned long flags;
1413 int channel = info->line - card->first_line;
1414
1415 if (!cy_is_Z(card)) {
1416 spin_lock_irqsave(&card->card_lock, flags);
1417 cyy_writeb(info, CyCAR, channel & 0x03);
1418 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
1419 spin_unlock_irqrestore(&card->card_lock, flags);
1420 } else {
1421 #ifdef CONFIG_CYZ_INTR
1422 int retval;
1423
1424 spin_lock_irqsave(&card->card_lock, flags);
1425 retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L);
1426 if (retval != 0) {
1427 printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was "
1428 "%x\n", info->line, retval);
1429 }
1430 spin_unlock_irqrestore(&card->card_lock, flags);
1431 #else /* CONFIG_CYZ_INTR */
1432 /* Don't have to do anything at this time */
1433 #endif /* CONFIG_CYZ_INTR */
1434 }
1435 } /* start_xmit */
1436
1437 /*
1438 * This routine shuts down a serial port; interrupts are disabled,
1439 * and DTR is dropped if the hangup on close termio flag is on.
1440 */
1441 static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
1442 {
1443 struct cyclades_card *card;
1444 unsigned long flags;
1445
1446 if (!(info->port.flags & ASYNC_INITIALIZED))
1447 return;
1448
1449 card = info->card;
1450 if (!cy_is_Z(card)) {
1451 spin_lock_irqsave(&card->card_lock, flags);
1452
1453 /* Clear delta_msr_wait queue to avoid mem leaks. */
1454 wake_up_interruptible(&info->port.delta_msr_wait);
1455
1456 if (info->port.xmit_buf) {
1457 unsigned char *temp;
1458 temp = info->port.xmit_buf;
1459 info->port.xmit_buf = NULL;
1460 free_page((unsigned long)temp);
1461 }
1462 if (tty->termios.c_cflag & HUPCL)
1463 cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
1464
1465 cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
1466 /* it may be appropriate to clear _XMIT at
1467 some later date (after testing)!!! */
1468
1469 set_bit(TTY_IO_ERROR, &tty->flags);
1470 info->port.flags &= ~ASYNC_INITIALIZED;
1471 spin_unlock_irqrestore(&card->card_lock, flags);
1472 } else {
1473 #ifdef CY_DEBUG_OPEN
1474 int channel = info->line - card->first_line;
1475 printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
1476 "base_addr %p\n", card, channel, card->base_addr);
1477 #endif
1478
1479 if (!cyz_is_loaded(card))
1480 return;
1481
1482 spin_lock_irqsave(&card->card_lock, flags);
1483
1484 if (info->port.xmit_buf) {
1485 unsigned char *temp;
1486 temp = info->port.xmit_buf;
1487 info->port.xmit_buf = NULL;
1488 free_page((unsigned long)temp);
1489 }
1490
1491 if (tty->termios.c_cflag & HUPCL)
1492 tty_port_lower_dtr_rts(&info->port);
1493
1494 set_bit(TTY_IO_ERROR, &tty->flags);
1495 info->port.flags &= ~ASYNC_INITIALIZED;
1496
1497 spin_unlock_irqrestore(&card->card_lock, flags);
1498 }
1499
1500 #ifdef CY_DEBUG_OPEN
1501 printk(KERN_DEBUG "cyc shutdown done\n");
1502 #endif
1503 } /* shutdown */
1504
1505 /*
1506 * ------------------------------------------------------------
1507 * cy_open() and friends
1508 * ------------------------------------------------------------
1509 */
1510
1511 /*
1512 * This routine is called whenever a serial port is opened. It
1513 * performs the serial-specific initialization for the tty structure.
1514 */
1515 static int cy_open(struct tty_struct *tty, struct file *filp)
1516 {
1517 struct cyclades_port *info;
1518 unsigned int i, line = tty->index;
1519 int retval;
1520
1521 for (i = 0; i < NR_CARDS; i++)
1522 if (line < cy_card[i].first_line + cy_card[i].nports &&
1523 line >= cy_card[i].first_line)
1524 break;
1525 if (i >= NR_CARDS)
1526 return -ENODEV;
1527 info = &cy_card[i].ports[line - cy_card[i].first_line];
1528 if (info->line < 0)
1529 return -ENODEV;
1530
1531 /* If the card's firmware hasn't been loaded,
1532 treat it as absent from the system. This
1533 will make the user pay attention.
1534 */
1535 if (cy_is_Z(info->card)) {
1536 struct cyclades_card *cinfo = info->card;
1537 struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
1538
1539 if (!cyz_is_loaded(cinfo)) {
1540 if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) &&
1541 readl(&firm_id->signature) ==
1542 ZFIRM_HLT) {
1543 printk(KERN_ERR "cyc:Cyclades-Z Error: you "
1544 "need an external power supply for "
1545 "this number of ports.\nFirmware "
1546 "halted.\n");
1547 } else {
1548 printk(KERN_ERR "cyc:Cyclades-Z firmware not "
1549 "yet loaded\n");
1550 }
1551 return -ENODEV;
1552 }
1553 #ifdef CONFIG_CYZ_INTR
1554 else {
1555 /* In case this Z board is operating in interrupt mode, its
1556 interrupts should be enabled as soon as the first open
1557 happens to one of its ports. */
1558 if (!cinfo->intr_enabled) {
1559 u16 intr;
1560
1561 /* Enable interrupts on the PLX chip */
1562 intr = readw(&cinfo->ctl_addr.p9060->
1563 intr_ctrl_stat) | 0x0900;
1564 cy_writew(&cinfo->ctl_addr.p9060->
1565 intr_ctrl_stat, intr);
1566 /* Enable interrupts on the FW */
1567 retval = cyz_issue_cmd(cinfo, 0,
1568 C_CM_IRQ_ENBL, 0L);
1569 if (retval != 0) {
1570 printk(KERN_ERR "cyc:IRQ enable retval "
1571 "was %x\n", retval);
1572 }
1573 cinfo->intr_enabled = 1;
1574 }
1575 }
1576 #endif /* CONFIG_CYZ_INTR */
1577 /* Make sure this Z port really exists in hardware */
1578 if (info->line > (cinfo->first_line + cinfo->nports - 1))
1579 return -ENODEV;
1580 }
1581 #ifdef CY_DEBUG_OTHER
1582 printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
1583 #endif
1584 tty->driver_data = info;
1585 if (serial_paranoia_check(info, tty->name, "cy_open"))
1586 return -ENODEV;
1587
1588 #ifdef CY_DEBUG_OPEN
1589 printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line,
1590 info->port.count);
1591 #endif
1592 info->port.count++;
1593 #ifdef CY_DEBUG_COUNT
1594 printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n",
1595 current->pid, info->port.count);
1596 #endif
1597
1598 /*
1599 * If the port is the middle of closing, bail out now
1600 */
1601 if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
1602 wait_event_interruptible_tty(tty, info->port.close_wait,
1603 !(info->port.flags & ASYNC_CLOSING));
1604 return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
1605 }
1606
1607 /*
1608 * Start up serial port
1609 */
1610 retval = cy_startup(info, tty);
1611 if (retval)
1612 return retval;
1613
1614 retval = tty_port_block_til_ready(&info->port, tty, filp);
1615 if (retval) {
1616 #ifdef CY_DEBUG_OPEN
1617 printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
1618 "with %d\n", retval);
1619 #endif
1620 return retval;
1621 }
1622
1623 info->throttle = 0;
1624 tty_port_tty_set(&info->port, tty);
1625
1626 #ifdef CY_DEBUG_OPEN
1627 printk(KERN_DEBUG "cyc:cy_open done\n");
1628 #endif
1629 return 0;
1630 } /* cy_open */
1631
1632 /*
1633 * cy_wait_until_sent() --- wait until the transmitter is empty
1634 */
1635 static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
1636 {
1637 struct cyclades_card *card;
1638 struct cyclades_port *info = tty->driver_data;
1639 unsigned long orig_jiffies;
1640 int char_time;
1641
1642 if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent"))
1643 return;
1644
1645 if (info->xmit_fifo_size == 0)
1646 return; /* Just in case.... */
1647
1648 orig_jiffies = jiffies;
1649 /*
1650 * Set the check interval to be 1/5 of the estimated time to
1651 * send a single character, and make it at least 1. The check
1652 * interval should also be less than the timeout.
1653 *
1654 * Note: we have to use pretty tight timings here to satisfy
1655 * the NIST-PCTS.
1656 */
1657 char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
1658 char_time = char_time / 5;
1659 if (char_time <= 0)
1660 char_time = 1;
1661 if (timeout < 0)
1662 timeout = 0;
1663 if (timeout)
1664 char_time = min(char_time, timeout);
1665 /*
1666 * If the transmitter hasn't cleared in twice the approximate
1667 * amount of time to send the entire FIFO, it probably won't
1668 * ever clear. This assumes the UART isn't doing flow
1669 * control, which is currently the case. Hence, if it ever
1670 * takes longer than info->timeout, this is probably due to a
1671 * UART bug of some kind. So, we clamp the timeout parameter at
1672 * 2*info->timeout.
1673 */
1674 if (!timeout || timeout > 2 * info->timeout)
1675 timeout = 2 * info->timeout;
1676
1677 card = info->card;
1678 if (!cy_is_Z(card)) {
1679 while (cyy_readb(info, CySRER) & CyTxRdy) {
1680 if (msleep_interruptible(jiffies_to_msecs(char_time)))
1681 break;
1682 if (timeout && time_after(jiffies, orig_jiffies +
1683 timeout))
1684 break;
1685 }
1686 }
1687 /* Run one more char cycle */
1688 msleep_interruptible(jiffies_to_msecs(char_time * 5));
1689 }
1690
1691 static void cy_flush_buffer(struct tty_struct *tty)
1692 {
1693 struct cyclades_port *info = tty->driver_data;
1694 struct cyclades_card *card;
1695 int channel, retval;
1696 unsigned long flags;
1697
1698 #ifdef CY_DEBUG_IO
1699 printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line);
1700 #endif
1701
1702 if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
1703 return;
1704
1705 card = info->card;
1706 channel = info->line - card->first_line;
1707
1708 spin_lock_irqsave(&card->card_lock, flags);
1709 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1710 spin_unlock_irqrestore(&card->card_lock, flags);
1711
1712 if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board
1713 buffers as well */
1714 spin_lock_irqsave(&card->card_lock, flags);
1715 retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
1716 if (retval != 0) {
1717 printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d "
1718 "was %x\n", info->line, retval);
1719 }
1720 spin_unlock_irqrestore(&card->card_lock, flags);
1721 }
1722 tty_wakeup(tty);
1723 } /* cy_flush_buffer */
1724
1725
1726 static void cy_do_close(struct tty_port *port)
1727 {
1728 struct cyclades_port *info = container_of(port, struct cyclades_port,
1729 port);
1730 struct cyclades_card *card;
1731 unsigned long flags;
1732 int channel;
1733
1734 card = info->card;
1735 channel = info->line - card->first_line;
1736 spin_lock_irqsave(&card->card_lock, flags);
1737
1738 if (!cy_is_Z(card)) {
1739 /* Stop accepting input */
1740 cyy_writeb(info, CyCAR, channel & 0x03);
1741 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData);
1742 if (info->port.flags & ASYNC_INITIALIZED) {
1743 /* Waiting for on-board buffers to be empty before
1744 closing the port */
1745 spin_unlock_irqrestore(&card->card_lock, flags);
1746 cy_wait_until_sent(port->tty, info->timeout);
1747 spin_lock_irqsave(&card->card_lock, flags);
1748 }
1749 } else {
1750 #ifdef Z_WAKE
1751 /* Waiting for on-board buffers to be empty before closing
1752 the port */
1753 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
1754 int retval;
1755
1756 if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) {
1757 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L);
1758 if (retval != 0) {
1759 printk(KERN_DEBUG "cyc:cy_close retval on "
1760 "ttyC%d was %x\n", info->line, retval);
1761 }
1762 spin_unlock_irqrestore(&card->card_lock, flags);
1763 wait_for_completion_interruptible(&info->shutdown_wait);
1764 spin_lock_irqsave(&card->card_lock, flags);
1765 }
1766 #endif
1767 }
1768 spin_unlock_irqrestore(&card->card_lock, flags);
1769 cy_shutdown(info, port->tty);
1770 }
1771
1772 /*
1773 * This routine is called when a particular tty device is closed.
1774 */
1775 static void cy_close(struct tty_struct *tty, struct file *filp)
1776 {
1777 struct cyclades_port *info = tty->driver_data;
1778 if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
1779 return;
1780 tty_port_close(&info->port, tty, filp);
1781 } /* cy_close */
1782
1783 /* This routine gets called when tty_write has put something into
1784 * the write_queue. The characters may come from user space or
1785 * kernel space.
1786 *
1787 * This routine will return the number of characters actually
1788 * accepted for writing.
1789 *
1790 * If the port is not already transmitting stuff, start it off by
1791 * enabling interrupts. The interrupt service routine will then
1792 * ensure that the characters are sent.
1793 * If the port is already active, there is no need to kick it.
1794 *
1795 */
1796 static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
1797 {
1798 struct cyclades_port *info = tty->driver_data;
1799 unsigned long flags;
1800 int c, ret = 0;
1801
1802 #ifdef CY_DEBUG_IO
1803 printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line);
1804 #endif
1805
1806 if (serial_paranoia_check(info, tty->name, "cy_write"))
1807 return 0;
1808
1809 if (!info->port.xmit_buf)
1810 return 0;
1811
1812 spin_lock_irqsave(&info->card->card_lock, flags);
1813 while (1) {
1814 c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1));
1815 c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head));
1816
1817 if (c <= 0)
1818 break;
1819
1820 memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
1821 info->xmit_head = (info->xmit_head + c) &
1822 (SERIAL_XMIT_SIZE - 1);
1823 info->xmit_cnt += c;
1824 buf += c;
1825 count -= c;
1826 ret += c;
1827 }
1828 spin_unlock_irqrestore(&info->card->card_lock, flags);
1829
1830 info->idle_stats.xmit_bytes += ret;
1831 info->idle_stats.xmit_idle = jiffies;
1832
1833 if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped)
1834 start_xmit(info);
1835
1836 return ret;
1837 } /* cy_write */
1838
1839 /*
1840 * This routine is called by the kernel to write a single
1841 * character to the tty device. If the kernel uses this routine,
1842 * it must call the flush_chars() routine (if defined) when it is
1843 * done stuffing characters into the driver. If there is no room
1844 * in the queue, the character is ignored.
1845 */
1846 static int cy_put_char(struct tty_struct *tty, unsigned char ch)
1847 {
1848 struct cyclades_port *info = tty->driver_data;
1849 unsigned long flags;
1850
1851 #ifdef CY_DEBUG_IO
1852 printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line);
1853 #endif
1854
1855 if (serial_paranoia_check(info, tty->name, "cy_put_char"))
1856 return 0;
1857
1858 if (!info->port.xmit_buf)
1859 return 0;
1860
1861 spin_lock_irqsave(&info->card->card_lock, flags);
1862 if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) {
1863 spin_unlock_irqrestore(&info->card->card_lock, flags);
1864 return 0;
1865 }
1866
1867 info->port.xmit_buf[info->xmit_head++] = ch;
1868 info->xmit_head &= SERIAL_XMIT_SIZE - 1;
1869 info->xmit_cnt++;
1870 info->idle_stats.xmit_bytes++;
1871 info->idle_stats.xmit_idle = jiffies;
1872 spin_unlock_irqrestore(&info->card->card_lock, flags);
1873 return 1;
1874 } /* cy_put_char */
1875
1876 /*
1877 * This routine is called by the kernel after it has written a
1878 * series of characters to the tty device using put_char().
1879 */
1880 static void cy_flush_chars(struct tty_struct *tty)
1881 {
1882 struct cyclades_port *info = tty->driver_data;
1883
1884 #ifdef CY_DEBUG_IO
1885 printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line);
1886 #endif
1887
1888 if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
1889 return;
1890
1891 if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1892 !info->port.xmit_buf)
1893 return;
1894
1895 start_xmit(info);
1896 } /* cy_flush_chars */
1897
1898 /*
1899 * This routine returns the numbers of characters the tty driver
1900 * will accept for queuing to be written. This number is subject
1901 * to change as output buffers get emptied, or if the output flow
1902 * control is activated.
1903 */
1904 static int cy_write_room(struct tty_struct *tty)
1905 {
1906 struct cyclades_port *info = tty->driver_data;
1907 int ret;
1908
1909 #ifdef CY_DEBUG_IO
1910 printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line);
1911 #endif
1912
1913 if (serial_paranoia_check(info, tty->name, "cy_write_room"))
1914 return 0;
1915 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
1916 if (ret < 0)
1917 ret = 0;
1918 return ret;
1919 } /* cy_write_room */
1920
1921 static int cy_chars_in_buffer(struct tty_struct *tty)
1922 {
1923 struct cyclades_port *info = tty->driver_data;
1924
1925 if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
1926 return 0;
1927
1928 #ifdef Z_EXT_CHARS_IN_BUFFER
1929 if (!cy_is_Z(info->card)) {
1930 #endif /* Z_EXT_CHARS_IN_BUFFER */
1931 #ifdef CY_DEBUG_IO
1932 printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
1933 info->line, info->xmit_cnt);
1934 #endif
1935 return info->xmit_cnt;
1936 #ifdef Z_EXT_CHARS_IN_BUFFER
1937 } else {
1938 struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
1939 int char_count;
1940 __u32 tx_put, tx_get, tx_bufsize;
1941
1942 tx_get = readl(&buf_ctrl->tx_get);
1943 tx_put = readl(&buf_ctrl->tx_put);
1944 tx_bufsize = readl(&buf_ctrl->tx_bufsize);
1945 if (tx_put >= tx_get)
1946 char_count = tx_put - tx_get;
1947 else
1948 char_count = tx_put - tx_get + tx_bufsize;
1949 #ifdef CY_DEBUG_IO
1950 printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
1951 info->line, info->xmit_cnt + char_count);
1952 #endif
1953 return info->xmit_cnt + char_count;
1954 }
1955 #endif /* Z_EXT_CHARS_IN_BUFFER */
1956 } /* cy_chars_in_buffer */
1957
1958 /*
1959 * ------------------------------------------------------------
1960 * cy_ioctl() and friends
1961 * ------------------------------------------------------------
1962 */
1963
1964 static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
1965 {
1966 int co, co_val, bpr;
1967 __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 :
1968 25000000);
1969
1970 if (baud == 0) {
1971 info->tbpr = info->tco = info->rbpr = info->rco = 0;
1972 return;
1973 }
1974
1975 /* determine which prescaler to use */
1976 for (co = 4, co_val = 2048; co; co--, co_val >>= 2) {
1977 if (cy_clock / co_val / baud > 63)
1978 break;
1979 }
1980
1981 bpr = (cy_clock / co_val * 2 / baud + 1) / 2;
1982 if (bpr > 255)
1983 bpr = 255;
1984
1985 info->tbpr = info->rbpr = bpr;
1986 info->tco = info->rco = co;
1987 }
1988
1989 /*
1990 * This routine finds or computes the various line characteristics.
1991 * It used to be called config_setup
1992 */
1993 static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
1994 {
1995 struct cyclades_card *card;
1996 unsigned long flags;
1997 int channel;
1998 unsigned cflag, iflag;
1999 int baud, baud_rate = 0;
2000 int i;
2001
2002 if (info->line == -1)
2003 return;
2004
2005 cflag = tty->termios.c_cflag;
2006 iflag = tty->termios.c_iflag;
2007
2008 /*
2009 * Set up the tty->alt_speed kludge
2010 */
2011 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
2012 tty->alt_speed = 57600;
2013 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
2014 tty->alt_speed = 115200;
2015 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
2016 tty->alt_speed = 230400;
2017 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
2018 tty->alt_speed = 460800;
2019
2020 card = info->card;
2021 channel = info->line - card->first_line;
2022
2023 if (!cy_is_Z(card)) {
2024 u32 cflags;
2025
2026 /* baud rate */
2027 baud = tty_get_baud_rate(tty);
2028 if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2029 ASYNC_SPD_CUST) {
2030 if (info->custom_divisor)
2031 baud_rate = info->baud / info->custom_divisor;
2032 else
2033 baud_rate = info->baud;
2034 } else if (baud > CD1400_MAX_SPEED) {
2035 baud = CD1400_MAX_SPEED;
2036 }
2037 /* find the baud index */
2038 for (i = 0; i < 20; i++) {
2039 if (baud == baud_table[i])
2040 break;
2041 }
2042 if (i == 20)
2043 i = 19; /* CD1400_MAX_SPEED */
2044
2045 if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2046 ASYNC_SPD_CUST) {
2047 cyy_baud_calc(info, baud_rate);
2048 } else {
2049 if (info->chip_rev >= CD1400_REV_J) {
2050 /* It is a CD1400 rev. J or later */
2051 info->tbpr = baud_bpr_60[i]; /* Tx BPR */
2052 info->tco = baud_co_60[i]; /* Tx CO */
2053 info->rbpr = baud_bpr_60[i]; /* Rx BPR */
2054 info->rco = baud_co_60[i]; /* Rx CO */
2055 } else {
2056 info->tbpr = baud_bpr_25[i]; /* Tx BPR */
2057 info->tco = baud_co_25[i]; /* Tx CO */
2058 info->rbpr = baud_bpr_25[i]; /* Rx BPR */
2059 info->rco = baud_co_25[i]; /* Rx CO */
2060 }
2061 }
2062 if (baud_table[i] == 134) {
2063 /* get it right for 134.5 baud */
2064 info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
2065 2;
2066 } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2067 ASYNC_SPD_CUST) {
2068 info->timeout = (info->xmit_fifo_size * HZ * 15 /
2069 baud_rate) + 2;
2070 } else if (baud_table[i]) {
2071 info->timeout = (info->xmit_fifo_size * HZ * 15 /
2072 baud_table[i]) + 2;
2073 /* this needs to be propagated into the card info */
2074 } else {
2075 info->timeout = 0;
2076 }
2077 /* By tradition (is it a standard?) a baud rate of zero
2078 implies the line should be/has been closed. A bit
2079 later in this routine such a test is performed. */
2080
2081 /* byte size and parity */
2082 info->cor5 = 0;
2083 info->cor4 = 0;
2084 /* receive threshold */
2085 info->cor3 = (info->default_threshold ?
2086 info->default_threshold : baud_cor3[i]);
2087 info->cor2 = CyETC;
2088 switch (cflag & CSIZE) {
2089 case CS5:
2090 info->cor1 = Cy_5_BITS;
2091 break;
2092 case CS6:
2093 info->cor1 = Cy_6_BITS;
2094 break;
2095 case CS7:
2096 info->cor1 = Cy_7_BITS;
2097 break;
2098 case CS8:
2099 info->cor1 = Cy_8_BITS;
2100 break;
2101 }
2102 if (cflag & CSTOPB)
2103 info->cor1 |= Cy_2_STOP;
2104
2105 if (cflag & PARENB) {
2106 if (cflag & PARODD)
2107 info->cor1 |= CyPARITY_O;
2108 else
2109 info->cor1 |= CyPARITY_E;
2110 } else
2111 info->cor1 |= CyPARITY_NONE;
2112
2113 /* CTS flow control flag */
2114 if (cflag & CRTSCTS) {
2115 info->port.flags |= ASYNC_CTS_FLOW;
2116 info->cor2 |= CyCtsAE;
2117 } else {
2118 info->port.flags &= ~ASYNC_CTS_FLOW;
2119 info->cor2 &= ~CyCtsAE;
2120 }
2121 if (cflag & CLOCAL)
2122 info->port.flags &= ~ASYNC_CHECK_CD;
2123 else
2124 info->port.flags |= ASYNC_CHECK_CD;
2125
2126 /***********************************************
2127 The hardware option, CyRtsAO, presents RTS when
2128 the chip has characters to send. Since most modems
2129 use RTS as reverse (inbound) flow control, this
2130 option is not used. If inbound flow control is
2131 necessary, DTR can be programmed to provide the
2132 appropriate signals for use with a non-standard
2133 cable. Contact Marcio Saito for details.
2134 ***********************************************/
2135
2136 channel &= 0x03;
2137
2138 spin_lock_irqsave(&card->card_lock, flags);
2139 cyy_writeb(info, CyCAR, channel);
2140
2141 /* tx and rx baud rate */
2142
2143 cyy_writeb(info, CyTCOR, info->tco);
2144 cyy_writeb(info, CyTBPR, info->tbpr);
2145 cyy_writeb(info, CyRCOR, info->rco);
2146 cyy_writeb(info, CyRBPR, info->rbpr);
2147
2148 /* set line characteristics according configuration */
2149
2150 cyy_writeb(info, CySCHR1, START_CHAR(tty));
2151 cyy_writeb(info, CySCHR2, STOP_CHAR(tty));
2152 cyy_writeb(info, CyCOR1, info->cor1);
2153 cyy_writeb(info, CyCOR2, info->cor2);
2154 cyy_writeb(info, CyCOR3, info->cor3);
2155 cyy_writeb(info, CyCOR4, info->cor4);
2156 cyy_writeb(info, CyCOR5, info->cor5);
2157
2158 cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
2159 CyCOR3ch);
2160
2161 /* !!! Is this needed? */
2162 cyy_writeb(info, CyCAR, channel);
2163 cyy_writeb(info, CyRTPR,
2164 (info->default_timeout ? info->default_timeout : 0x02));
2165 /* 10ms rx timeout */
2166
2167 cflags = CyCTS;
2168 if (!C_CLOCAL(tty))
2169 cflags |= CyDSR | CyRI | CyDCD;
2170 /* without modem intr */
2171 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh);
2172 /* act on 1->0 modem transitions */
2173 if ((cflag & CRTSCTS) && info->rflow)
2174 cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]);
2175 else
2176 cyy_writeb(info, CyMCOR1, cflags);
2177 /* act on 0->1 modem transitions */
2178 cyy_writeb(info, CyMCOR2, cflags);
2179
2180 if (i == 0) /* baud rate is zero, turn off line */
2181 cyy_change_rts_dtr(info, 0, TIOCM_DTR);
2182 else
2183 cyy_change_rts_dtr(info, TIOCM_DTR, 0);
2184
2185 clear_bit(TTY_IO_ERROR, &tty->flags);
2186 spin_unlock_irqrestore(&card->card_lock, flags);
2187
2188 } else {
2189 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
2190 __u32 sw_flow;
2191 int retval;
2192
2193 if (!cyz_is_loaded(card))
2194 return;
2195
2196 /* baud rate */
2197 baud = tty_get_baud_rate(tty);
2198 if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2199 ASYNC_SPD_CUST) {
2200 if (info->custom_divisor)
2201 baud_rate = info->baud / info->custom_divisor;
2202 else
2203 baud_rate = info->baud;
2204 } else if (baud > CYZ_MAX_SPEED) {
2205 baud = CYZ_MAX_SPEED;
2206 }
2207 cy_writel(&ch_ctrl->comm_baud, baud);
2208
2209 if (baud == 134) {
2210 /* get it right for 134.5 baud */
2211 info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
2212 2;
2213 } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
2214 ASYNC_SPD_CUST) {
2215 info->timeout = (info->xmit_fifo_size * HZ * 15 /
2216 baud_rate) + 2;
2217 } else if (baud) {
2218 info->timeout = (info->xmit_fifo_size * HZ * 15 /
2219 baud) + 2;
2220 /* this needs to be propagated into the card info */
2221 } else {
2222 info->timeout = 0;
2223 }
2224
2225 /* byte size and parity */
2226 switch (cflag & CSIZE) {
2227 case CS5:
2228 cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5);
2229 break;
2230 case CS6:
2231 cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6);
2232 break;
2233 case CS7:
2234 cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7);
2235 break;
2236 case CS8:
2237 cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8);
2238 break;
2239 }
2240 if (cflag & CSTOPB) {
2241 cy_writel(&ch_ctrl->comm_data_l,
2242 readl(&ch_ctrl->comm_data_l) | C_DL_2STOP);
2243 } else {
2244 cy_writel(&ch_ctrl->comm_data_l,
2245 readl(&ch_ctrl->comm_data_l) | C_DL_1STOP);
2246 }
2247 if (cflag & PARENB) {
2248 if (cflag & PARODD)
2249 cy_writel(&ch_ctrl->comm_parity, C_PR_ODD);
2250 else
2251 cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN);
2252 } else
2253 cy_writel(&ch_ctrl->comm_parity, C_PR_NONE);
2254
2255 /* CTS flow control flag */
2256 if (cflag & CRTSCTS) {
2257 cy_writel(&ch_ctrl->hw_flow,
2258 readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS);
2259 } else {
2260 cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) &
2261 ~(C_RS_CTS | C_RS_RTS));
2262 }
2263 /* As the HW flow control is done in firmware, the driver
2264 doesn't need to care about it */
2265 info->port.flags &= ~ASYNC_CTS_FLOW;
2266
2267 /* XON/XOFF/XANY flow control flags */
2268 sw_flow = 0;
2269 if (iflag & IXON) {
2270 sw_flow |= C_FL_OXX;
2271 if (iflag & IXANY)
2272 sw_flow |= C_FL_OIXANY;
2273 }
2274 cy_writel(&ch_ctrl->sw_flow, sw_flow);
2275
2276 retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L);
2277 if (retval != 0) {
2278 printk(KERN_ERR "cyc:set_line_char retval on ttyC%d "
2279 "was %x\n", info->line, retval);
2280 }
2281
2282 /* CD sensitivity */
2283 if (cflag & CLOCAL)
2284 info->port.flags &= ~ASYNC_CHECK_CD;
2285 else
2286 info->port.flags |= ASYNC_CHECK_CD;
2287
2288 if (baud == 0) { /* baud rate is zero, turn off line */
2289 cy_writel(&ch_ctrl->rs_control,
2290 readl(&ch_ctrl->rs_control) & ~C_RS_DTR);
2291 #ifdef CY_DEBUG_DTR
2292 printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n");
2293 #endif
2294 } else {
2295 cy_writel(&ch_ctrl->rs_control,
2296 readl(&ch_ctrl->rs_control) | C_RS_DTR);
2297 #ifdef CY_DEBUG_DTR
2298 printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n");
2299 #endif
2300 }
2301
2302 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
2303 if (retval != 0) {
2304 printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d "
2305 "was %x\n", info->line, retval);
2306 }
2307
2308 clear_bit(TTY_IO_ERROR, &tty->flags);
2309 }
2310 } /* set_line_char */
2311
2312 static int cy_get_serial_info(struct cyclades_port *info,
2313 struct serial_struct __user *retinfo)
2314 {
2315 struct cyclades_card *cinfo = info->card;
2316 struct serial_struct tmp = {
2317 .type = info->type,
2318 .line = info->line,
2319 .port = (info->card - cy_card) * 0x100 + info->line -
2320 cinfo->first_line,
2321 .irq = cinfo->irq,
2322 .flags = info->port.flags,
2323 .close_delay = info->port.close_delay,
2324 .closing_wait = info->port.closing_wait,
2325 .baud_base = info->baud,
2326 .custom_divisor = info->custom_divisor,
2327 .hub6 = 0, /*!!! */
2328 };
2329 return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
2330 }
2331
2332 static int
2333 cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
2334 struct serial_struct __user *new_info)
2335 {
2336 struct serial_struct new_serial;
2337 int ret;
2338
2339 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
2340 return -EFAULT;
2341
2342 mutex_lock(&info->port.mutex);
2343 if (!capable(CAP_SYS_ADMIN)) {
2344 if (new_serial.close_delay != info->port.close_delay ||
2345 new_serial.baud_base != info->baud ||
2346 (new_serial.flags & ASYNC_FLAGS &
2347 ~ASYNC_USR_MASK) !=
2348 (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
2349 {
2350 mutex_unlock(&info->port.mutex);
2351 return -EPERM;
2352 }
2353 info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
2354 (new_serial.flags & ASYNC_USR_MASK);
2355 info->baud = new_serial.baud_base;
2356 info->custom_divisor = new_serial.custom_divisor;
2357 goto check_and_exit;
2358 }
2359
2360 /*
2361 * OK, past this point, all the error checking has been done.
2362 * At this point, we start making changes.....
2363 */
2364
2365 info->baud = new_serial.baud_base;
2366 info->custom_divisor = new_serial.custom_divisor;
2367 info->port.flags = (info->port.flags & ~ASYNC_FLAGS) |
2368 (new_serial.flags & ASYNC_FLAGS);
2369 info->port.close_delay = new_serial.close_delay * HZ / 100;
2370 info->port.closing_wait = new_serial.closing_wait * HZ / 100;
2371
2372 check_and_exit:
2373 if (info->port.flags & ASYNC_INITIALIZED) {
2374 cy_set_line_char(info, tty);
2375 ret = 0;
2376 } else {
2377 ret = cy_startup(info, tty);
2378 }
2379 mutex_unlock(&info->port.mutex);
2380 return ret;
2381 } /* set_serial_info */
2382
2383 /*
2384 * get_lsr_info - get line status register info
2385 *
2386 * Purpose: Let user call ioctl() to get info when the UART physically
2387 * is emptied. On bus types like RS485, the transmitter must
2388 * release the bus after transmitting. This must be done when
2389 * the transmit shift register is empty, not be done when the
2390 * transmit holding register is empty. This functionality
2391 * allows an RS485 driver to be written in user space.
2392 */
2393 static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
2394 {
2395 struct cyclades_card *card = info->card;
2396 unsigned int result;
2397 unsigned long flags;
2398 u8 status;
2399
2400 if (!cy_is_Z(card)) {
2401 spin_lock_irqsave(&card->card_lock, flags);
2402 status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty);
2403 spin_unlock_irqrestore(&card->card_lock, flags);
2404 result = (status ? 0 : TIOCSER_TEMT);
2405 } else {
2406 /* Not supported yet */
2407 return -EINVAL;
2408 }
2409 return put_user(result, value);
2410 }
2411
2412 static int cy_tiocmget(struct tty_struct *tty)
2413 {
2414 struct cyclades_port *info = tty->driver_data;
2415 struct cyclades_card *card;
2416 int result;
2417
2418 if (serial_paranoia_check(info, tty->name, __func__))
2419 return -ENODEV;
2420
2421 card = info->card;
2422
2423 if (!cy_is_Z(card)) {
2424 unsigned long flags;
2425 int channel = info->line - card->first_line;
2426 u8 status;
2427
2428 spin_lock_irqsave(&card->card_lock, flags);
2429 cyy_writeb(info, CyCAR, channel & 0x03);
2430 status = cyy_readb(info, CyMSVR1);
2431 status |= cyy_readb(info, CyMSVR2);
2432 spin_unlock_irqrestore(&card->card_lock, flags);
2433
2434 if (info->rtsdtr_inv) {
2435 result = ((status & CyRTS) ? TIOCM_DTR : 0) |
2436 ((status & CyDTR) ? TIOCM_RTS : 0);
2437 } else {
2438 result = ((status & CyRTS) ? TIOCM_RTS : 0) |
2439 ((status & CyDTR) ? TIOCM_DTR : 0);
2440 }
2441 result |= ((status & CyDCD) ? TIOCM_CAR : 0) |
2442 ((status & CyRI) ? TIOCM_RNG : 0) |
2443 ((status & CyDSR) ? TIOCM_DSR : 0) |
2444 ((status & CyCTS) ? TIOCM_CTS : 0);
2445 } else {
2446 u32 lstatus;
2447
2448 if (!cyz_is_loaded(card)) {
2449 result = -ENODEV;
2450 goto end;
2451 }
2452
2453 lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
2454 result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
2455 ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
2456 ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
2457 ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
2458 ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
2459 ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
2460 }
2461 end:
2462 return result;
2463 } /* cy_tiomget */
2464
2465 static int
2466 cy_tiocmset(struct tty_struct *tty,
2467 unsigned int set, unsigned int clear)
2468 {
2469 struct cyclades_port *info = tty->driver_data;
2470 struct cyclades_card *card;
2471 unsigned long flags;
2472
2473 if (serial_paranoia_check(info, tty->name, __func__))
2474 return -ENODEV;
2475
2476 card = info->card;
2477 if (!cy_is_Z(card)) {
2478 spin_lock_irqsave(&card->card_lock, flags);
2479 cyy_change_rts_dtr(info, set, clear);
2480 spin_unlock_irqrestore(&card->card_lock, flags);
2481 } else {
2482 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
2483 int retval, channel = info->line - card->first_line;
2484 u32 rs;
2485
2486 if (!cyz_is_loaded(card))
2487 return -ENODEV;
2488
2489 spin_lock_irqsave(&card->card_lock, flags);
2490 rs = readl(&ch_ctrl->rs_control);
2491 if (set & TIOCM_RTS)
2492 rs |= C_RS_RTS;
2493 if (clear & TIOCM_RTS)
2494 rs &= ~C_RS_RTS;
2495 if (set & TIOCM_DTR) {
2496 rs |= C_RS_DTR;
2497 #ifdef CY_DEBUG_DTR
2498 printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n");
2499 #endif
2500 }
2501 if (clear & TIOCM_DTR) {
2502 rs &= ~C_RS_DTR;
2503 #ifdef CY_DEBUG_DTR
2504 printk(KERN_DEBUG "cyc:set_modem_info clearing "
2505 "Z DTR\n");
2506 #endif
2507 }
2508 cy_writel(&ch_ctrl->rs_control, rs);
2509 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
2510 spin_unlock_irqrestore(&card->card_lock, flags);
2511 if (retval != 0) {
2512 printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
2513 "was %x\n", info->line, retval);
2514 }
2515 }
2516 return 0;
2517 }
2518
2519 /*
2520 * cy_break() --- routine which turns the break handling on or off
2521 */
2522 static int cy_break(struct tty_struct *tty, int break_state)
2523 {
2524 struct cyclades_port *info = tty->driver_data;
2525 struct cyclades_card *card;
2526 unsigned long flags;
2527 int retval = 0;
2528
2529 if (serial_paranoia_check(info, tty->name, "cy_break"))
2530 return -EINVAL;
2531
2532 card = info->card;
2533
2534 spin_lock_irqsave(&card->card_lock, flags);
2535 if (!cy_is_Z(card)) {
2536 /* Let the transmit ISR take care of this (since it
2537 requires stuffing characters into the output stream).
2538 */
2539 if (break_state == -1) {
2540 if (!info->breakon) {
2541 info->breakon = 1;
2542 if (!info->xmit_cnt) {
2543 spin_unlock_irqrestore(&card->card_lock, flags);
2544 start_xmit(info);
2545 spin_lock_irqsave(&card->card_lock, flags);
2546 }
2547 }
2548 } else {
2549 if (!info->breakoff) {
2550 info->breakoff = 1;
2551 if (!info->xmit_cnt) {
2552 spin_unlock_irqrestore(&card->card_lock, flags);
2553 start_xmit(info);
2554 spin_lock_irqsave(&card->card_lock, flags);
2555 }
2556 }
2557 }
2558 } else {
2559 if (break_state == -1) {
2560 retval = cyz_issue_cmd(card,
2561 info->line - card->first_line,
2562 C_CM_SET_BREAK, 0L);
2563 if (retval != 0) {
2564 printk(KERN_ERR "cyc:cy_break (set) retval on "
2565 "ttyC%d was %x\n", info->line, retval);
2566 }
2567 } else {
2568 retval = cyz_issue_cmd(card,
2569 info->line - card->first_line,
2570 C_CM_CLR_BREAK, 0L);
2571 if (retval != 0) {
2572 printk(KERN_DEBUG "cyc:cy_break (clr) retval "
2573 "on ttyC%d was %x\n", info->line,
2574 retval);
2575 }
2576 }
2577 }
2578 spin_unlock_irqrestore(&card->card_lock, flags);
2579 return retval;
2580 } /* cy_break */
2581
2582 static int set_threshold(struct cyclades_port *info, unsigned long value)
2583 {
2584 struct cyclades_card *card = info->card;
2585 unsigned long flags;
2586
2587 if (!cy_is_Z(card)) {
2588 info->cor3 &= ~CyREC_FIFO;
2589 info->cor3 |= value & CyREC_FIFO;
2590
2591 spin_lock_irqsave(&card->card_lock, flags);
2592 cyy_writeb(info, CyCOR3, info->cor3);
2593 cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch);
2594 spin_unlock_irqrestore(&card->card_lock, flags);
2595 }
2596 return 0;
2597 } /* set_threshold */
2598
2599 static int get_threshold(struct cyclades_port *info,
2600 unsigned long __user *value)
2601 {
2602 struct cyclades_card *card = info->card;
2603
2604 if (!cy_is_Z(card)) {
2605 u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO;
2606 return put_user(tmp, value);
2607 }
2608 return 0;
2609 } /* get_threshold */
2610
2611 static int set_timeout(struct cyclades_port *info, unsigned long value)
2612 {
2613 struct cyclades_card *card = info->card;
2614 unsigned long flags;
2615
2616 if (!cy_is_Z(card)) {
2617 spin_lock_irqsave(&card->card_lock, flags);
2618 cyy_writeb(info, CyRTPR, value & 0xff);
2619 spin_unlock_irqrestore(&card->card_lock, flags);
2620 }
2621 return 0;
2622 } /* set_timeout */
2623
2624 static int get_timeout(struct cyclades_port *info,
2625 unsigned long __user *value)
2626 {
2627 struct cyclades_card *card = info->card;
2628
2629 if (!cy_is_Z(card)) {
2630 u8 tmp = cyy_readb(info, CyRTPR);
2631 return put_user(tmp, value);
2632 }
2633 return 0;
2634 } /* get_timeout */
2635
2636 static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
2637 struct cyclades_icount *cprev)
2638 {
2639 struct cyclades_icount cnow;
2640 unsigned long flags;
2641 int ret;
2642
2643 spin_lock_irqsave(&info->card->card_lock, flags);
2644 cnow = info->icount; /* atomic copy */
2645 spin_unlock_irqrestore(&info->card->card_lock, flags);
2646
2647 ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
2648 ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
2649 ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
2650 ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
2651
2652 *cprev = cnow;
2653
2654 return ret;
2655 }
2656
2657 /*
2658 * This routine allows the tty driver to implement device-
2659 * specific ioctl's. If the ioctl number passed in cmd is
2660 * not recognized by the driver, it should return ENOIOCTLCMD.
2661 */
2662 static int
2663 cy_ioctl(struct tty_struct *tty,
2664 unsigned int cmd, unsigned long arg)
2665 {
2666 struct cyclades_port *info = tty->driver_data;
2667 struct cyclades_icount cnow; /* kernel counter temps */
2668 int ret_val = 0;
2669 unsigned long flags;
2670 void __user *argp = (void __user *)arg;
2671
2672 if (serial_paranoia_check(info, tty->name, "cy_ioctl"))
2673 return -ENODEV;
2674
2675 #ifdef CY_DEBUG_OTHER
2676 printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
2677 info->line, cmd, arg);
2678 #endif
2679
2680 switch (cmd) {
2681 case CYGETMON:
2682 if (copy_to_user(argp, &info->mon, sizeof(info->mon))) {
2683 ret_val = -EFAULT;
2684 break;
2685 }
2686 memset(&info->mon, 0, sizeof(info->mon));
2687 break;
2688 case CYGETTHRESH:
2689 ret_val = get_threshold(info, argp);
2690 break;
2691 case CYSETTHRESH:
2692 ret_val = set_threshold(info, arg);
2693 break;
2694 case CYGETDEFTHRESH:
2695 ret_val = put_user(info->default_threshold,
2696 (unsigned long __user *)argp);
2697 break;
2698 case CYSETDEFTHRESH:
2699 info->default_threshold = arg & 0x0f;
2700 break;
2701 case CYGETTIMEOUT:
2702 ret_val = get_timeout(info, argp);
2703 break;
2704 case CYSETTIMEOUT:
2705 ret_val = set_timeout(info, arg);
2706 break;
2707 case CYGETDEFTIMEOUT:
2708 ret_val = put_user(info->default_timeout,
2709 (unsigned long __user *)argp);
2710 break;
2711 case CYSETDEFTIMEOUT:
2712 info->default_timeout = arg & 0xff;
2713 break;
2714 case CYSETRFLOW:
2715 info->rflow = (int)arg;
2716 break;
2717 case CYGETRFLOW:
2718 ret_val = info->rflow;
2719 break;
2720 case CYSETRTSDTR_INV:
2721 info->rtsdtr_inv = (int)arg;
2722 break;
2723 case CYGETRTSDTR_INV:
2724 ret_val = info->rtsdtr_inv;
2725 break;
2726 case CYGETCD1400VER:
2727 ret_val = info->chip_rev;
2728 break;
2729 #ifndef CONFIG_CYZ_INTR
2730 case CYZSETPOLLCYCLE:
2731 cyz_polling_cycle = (arg * HZ) / 1000;
2732 break;
2733 case CYZGETPOLLCYCLE:
2734 ret_val = (cyz_polling_cycle * 1000) / HZ;
2735 break;
2736 #endif /* CONFIG_CYZ_INTR */
2737 case CYSETWAIT:
2738 info->port.closing_wait = (unsigned short)arg * HZ / 100;
2739 break;
2740 case CYGETWAIT:
2741 ret_val = info->port.closing_wait / (HZ / 100);
2742 break;
2743 case TIOCGSERIAL:
2744 ret_val = cy_get_serial_info(info, argp);
2745 break;
2746 case TIOCSSERIAL:
2747 ret_val = cy_set_serial_info(info, tty, argp);
2748 break;
2749 case TIOCSERGETLSR: /* Get line status register */
2750 ret_val = get_lsr_info(info, argp);
2751 break;
2752 /*
2753 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
2754 * - mask passed in arg for lines of interest
2755 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
2756 * Caller should use TIOCGICOUNT to see which one it was
2757 */
2758 case TIOCMIWAIT:
2759 spin_lock_irqsave(&info->card->card_lock, flags);
2760 /* note the counters on entry */
2761 cnow = info->icount;
2762 spin_unlock_irqrestore(&info->card->card_lock, flags);
2763 ret_val = wait_event_interruptible(info->port.delta_msr_wait,
2764 cy_cflags_changed(info, arg, &cnow));
2765 break;
2766
2767 /*
2768 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2769 * Return: write counters to the user passed counter struct
2770 * NB: both 1->0 and 0->1 transitions are counted except for
2771 * RI where only 0->1 is counted.
2772 */
2773 default:
2774 ret_val = -ENOIOCTLCMD;
2775 }
2776
2777 #ifdef CY_DEBUG_OTHER
2778 printk(KERN_DEBUG "cyc:cy_ioctl done\n");
2779 #endif
2780 return ret_val;
2781 } /* cy_ioctl */
2782
2783 static int cy_get_icount(struct tty_struct *tty,
2784 struct serial_icounter_struct *sic)
2785 {
2786 struct cyclades_port *info = tty->driver_data;
2787 struct cyclades_icount cnow; /* Used to snapshot */
2788 unsigned long flags;
2789
2790 spin_lock_irqsave(&info->card->card_lock, flags);
2791 cnow = info->icount;
2792 spin_unlock_irqrestore(&info->card->card_lock, flags);
2793
2794 sic->cts = cnow.cts;
2795 sic->dsr = cnow.dsr;
2796 sic->rng = cnow.rng;
2797 sic->dcd = cnow.dcd;
2798 sic->rx = cnow.rx;
2799 sic->tx = cnow.tx;
2800 sic->frame = cnow.frame;
2801 sic->overrun = cnow.overrun;
2802 sic->parity = cnow.parity;
2803 sic->brk = cnow.brk;
2804 sic->buf_overrun = cnow.buf_overrun;
2805 return 0;
2806 }
2807
2808 /*
2809 * This routine allows the tty driver to be notified when
2810 * device's termios settings have changed. Note that a
2811 * well-designed tty driver should be prepared to accept the case
2812 * where old == NULL, and try to do something rational.
2813 */
2814 static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
2815 {
2816 struct cyclades_port *info = tty->driver_data;
2817
2818 #ifdef CY_DEBUG_OTHER
2819 printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
2820 #endif
2821
2822 cy_set_line_char(info, tty);
2823
2824 if ((old_termios->c_cflag & CRTSCTS) &&
2825 !(tty->termios.c_cflag & CRTSCTS)) {
2826 tty->hw_stopped = 0;
2827 cy_start(tty);
2828 }
2829 #if 0
2830 /*
2831 * No need to wake up processes in open wait, since they
2832 * sample the CLOCAL flag once, and don't recheck it.
2833 * XXX It's not clear whether the current behavior is correct
2834 * or not. Hence, this may change.....
2835 */
2836 if (!(old_termios->c_cflag & CLOCAL) &&
2837 (tty->termios.c_cflag & CLOCAL))
2838 wake_up_interruptible(&info->port.open_wait);
2839 #endif
2840 } /* cy_set_termios */
2841
2842 /* This function is used to send a high-priority XON/XOFF character to
2843 the device.
2844 */
2845 static void cy_send_xchar(struct tty_struct *tty, char ch)
2846 {
2847 struct cyclades_port *info = tty->driver_data;
2848 struct cyclades_card *card;
2849 int channel;
2850
2851 if (serial_paranoia_check(info, tty->name, "cy_send_xchar"))
2852 return;
2853
2854 info->x_char = ch;
2855
2856 if (ch)
2857 cy_start(tty);
2858
2859 card = info->card;
2860 channel = info->line - card->first_line;
2861
2862 if (cy_is_Z(card)) {
2863 if (ch == STOP_CHAR(tty))
2864 cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L);
2865 else if (ch == START_CHAR(tty))
2866 cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L);
2867 }
2868 }
2869
2870 /* This routine is called by the upper-layer tty layer to signal
2871 that incoming characters should be throttled because the input
2872 buffers are close to full.
2873 */
2874 static void cy_throttle(struct tty_struct *tty)
2875 {
2876 struct cyclades_port *info = tty->driver_data;
2877 struct cyclades_card *card;
2878 unsigned long flags;
2879
2880 #ifdef CY_DEBUG_THROTTLE
2881 char buf[64];
2882
2883 printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf),
2884 tty->ldisc.chars_in_buffer(tty), info->line);
2885 #endif
2886
2887 if (serial_paranoia_check(info, tty->name, "cy_throttle"))
2888 return;
2889
2890 card = info->card;
2891
2892 if (I_IXOFF(tty)) {
2893 if (!cy_is_Z(card))
2894 cy_send_xchar(tty, STOP_CHAR(tty));
2895 else
2896 info->throttle = 1;
2897 }
2898
2899 if (tty->termios.c_cflag & CRTSCTS) {
2900 if (!cy_is_Z(card)) {
2901 spin_lock_irqsave(&card->card_lock, flags);
2902 cyy_change_rts_dtr(info, 0, TIOCM_RTS);
2903 spin_unlock_irqrestore(&card->card_lock, flags);
2904 } else {
2905 info->throttle = 1;
2906 }
2907 }
2908 } /* cy_throttle */
2909
2910 /*
2911 * This routine notifies the tty driver that it should signal
2912 * that characters can now be sent to the tty without fear of
2913 * overrunning the input buffers of the line disciplines.
2914 */
2915 static void cy_unthrottle(struct tty_struct *tty)
2916 {
2917 struct cyclades_port *info = tty->driver_data;
2918 struct cyclades_card *card;
2919 unsigned long flags;
2920
2921 #ifdef CY_DEBUG_THROTTLE
2922 char buf[64];
2923
2924 printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n",
2925 tty_name(tty, buf), tty_chars_in_buffer(tty), info->line);
2926 #endif
2927
2928 if (serial_paranoia_check(info, tty->name, "cy_unthrottle"))
2929 return;
2930
2931 if (I_IXOFF(tty)) {
2932 if (info->x_char)
2933 info->x_char = 0;
2934 else
2935 cy_send_xchar(tty, START_CHAR(tty));
2936 }
2937
2938 if (tty->termios.c_cflag & CRTSCTS) {
2939 card = info->card;
2940 if (!cy_is_Z(card)) {
2941 spin_lock_irqsave(&card->card_lock, flags);
2942 cyy_change_rts_dtr(info, TIOCM_RTS, 0);
2943 spin_unlock_irqrestore(&card->card_lock, flags);
2944 } else {
2945 info->throttle = 0;
2946 }
2947 }
2948 } /* cy_unthrottle */
2949
2950 /* cy_start and cy_stop provide software output flow control as a
2951 function of XON/XOFF, software CTS, and other such stuff.
2952 */
2953 static void cy_stop(struct tty_struct *tty)
2954 {
2955 struct cyclades_card *cinfo;
2956 struct cyclades_port *info = tty->driver_data;
2957 int channel;
2958 unsigned long flags;
2959
2960 #ifdef CY_DEBUG_OTHER
2961 printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line);
2962 #endif
2963
2964 if (serial_paranoia_check(info, tty->name, "cy_stop"))
2965 return;
2966
2967 cinfo = info->card;
2968 channel = info->line - cinfo->first_line;
2969 if (!cy_is_Z(cinfo)) {
2970 spin_lock_irqsave(&cinfo->card_lock, flags);
2971 cyy_writeb(info, CyCAR, channel & 0x03);
2972 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
2973 spin_unlock_irqrestore(&cinfo->card_lock, flags);
2974 }
2975 } /* cy_stop */
2976
2977 static void cy_start(struct tty_struct *tty)
2978 {
2979 struct cyclades_card *cinfo;
2980 struct cyclades_port *info = tty->driver_data;
2981 int channel;
2982 unsigned long flags;
2983
2984 #ifdef CY_DEBUG_OTHER
2985 printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line);
2986 #endif
2987
2988 if (serial_paranoia_check(info, tty->name, "cy_start"))
2989 return;
2990
2991 cinfo = info->card;
2992 channel = info->line - cinfo->first_line;
2993 if (!cy_is_Z(cinfo)) {
2994 spin_lock_irqsave(&cinfo->card_lock, flags);
2995 cyy_writeb(info, CyCAR, channel & 0x03);
2996 cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
2997 spin_unlock_irqrestore(&cinfo->card_lock, flags);
2998 }
2999 } /* cy_start */
3000
3001 /*
3002 * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
3003 */
3004 static void cy_hangup(struct tty_struct *tty)
3005 {
3006 struct cyclades_port *info = tty->driver_data;
3007
3008 #ifdef CY_DEBUG_OTHER
3009 printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line);
3010 #endif
3011
3012 if (serial_paranoia_check(info, tty->name, "cy_hangup"))
3013 return;
3014
3015 cy_flush_buffer(tty);
3016 cy_shutdown(info, tty);
3017 tty_port_hangup(&info->port);
3018 } /* cy_hangup */
3019
3020 static int cyy_carrier_raised(struct tty_port *port)
3021 {
3022 struct cyclades_port *info = container_of(port, struct cyclades_port,
3023 port);
3024 struct cyclades_card *cinfo = info->card;
3025 unsigned long flags;
3026 int channel = info->line - cinfo->first_line;
3027 u32 cd;
3028
3029 spin_lock_irqsave(&cinfo->card_lock, flags);
3030 cyy_writeb(info, CyCAR, channel & 0x03);
3031 cd = cyy_readb(info, CyMSVR1) & CyDCD;
3032 spin_unlock_irqrestore(&cinfo->card_lock, flags);
3033
3034 return cd;
3035 }
3036
3037 static void cyy_dtr_rts(struct tty_port *port, int raise)
3038 {
3039 struct cyclades_port *info = container_of(port, struct cyclades_port,
3040 port);
3041 struct cyclades_card *cinfo = info->card;
3042 unsigned long flags;
3043
3044 spin_lock_irqsave(&cinfo->card_lock, flags);
3045 cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0,
3046 raise ? 0 : TIOCM_RTS | TIOCM_DTR);
3047 spin_unlock_irqrestore(&cinfo->card_lock, flags);
3048 }
3049
3050 static int cyz_carrier_raised(struct tty_port *port)
3051 {
3052 struct cyclades_port *info = container_of(port, struct cyclades_port,
3053 port);
3054
3055 return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD;
3056 }
3057
3058 static void cyz_dtr_rts(struct tty_port *port, int raise)
3059 {
3060 struct cyclades_port *info = container_of(port, struct cyclades_port,
3061 port);
3062 struct cyclades_card *cinfo = info->card;
3063 struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
3064 int ret, channel = info->line - cinfo->first_line;
3065 u32 rs;
3066
3067 rs = readl(&ch_ctrl->rs_control);
3068 if (raise)
3069 rs |= C_RS_RTS | C_RS_DTR;
3070 else
3071 rs &= ~(C_RS_RTS | C_RS_DTR);
3072 cy_writel(&ch_ctrl->rs_control, rs);
3073 ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L);
3074 if (ret != 0)
3075 printk(KERN_ERR "%s: retval on ttyC%d was %x\n",
3076 __func__, info->line, ret);
3077 #ifdef CY_DEBUG_DTR
3078 printk(KERN_DEBUG "%s: raising Z DTR\n", __func__);
3079 #endif
3080 }
3081
3082 static const struct tty_port_operations cyy_port_ops = {
3083 .carrier_raised = cyy_carrier_raised,
3084 .dtr_rts = cyy_dtr_rts,
3085 .shutdown = cy_do_close,
3086 };
3087
3088 static const struct tty_port_operations cyz_port_ops = {
3089 .carrier_raised = cyz_carrier_raised,
3090 .dtr_rts = cyz_dtr_rts,
3091 .shutdown = cy_do_close,
3092 };
3093
3094 /*
3095 * ---------------------------------------------------------------------
3096 * cy_init() and friends
3097 *
3098 * cy_init() is called at boot-time to initialize the serial driver.
3099 * ---------------------------------------------------------------------
3100 */
3101
3102 static int __devinit cy_init_card(struct cyclades_card *cinfo)
3103 {
3104 struct cyclades_port *info;
3105 unsigned int channel, port;
3106
3107 spin_lock_init(&cinfo->card_lock);
3108 cinfo->intr_enabled = 0;
3109
3110 cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports),
3111 GFP_KERNEL);
3112 if (cinfo->ports == NULL) {
3113 printk(KERN_ERR "Cyclades: cannot allocate ports\n");
3114 return -ENOMEM;
3115 }
3116
3117 for (channel = 0, port = cinfo->first_line; channel < cinfo->nports;
3118 channel++, port++) {
3119 info = &cinfo->ports[channel];
3120 tty_port_init(&info->port);
3121 info->magic = CYCLADES_MAGIC;
3122 info->card = cinfo;
3123 info->line = port;
3124
3125 info->port.closing_wait = CLOSING_WAIT_DELAY;
3126 info->port.close_delay = 5 * HZ / 10;
3127 info->port.flags = STD_COM_FLAGS;
3128 init_completion(&info->shutdown_wait);
3129
3130 if (cy_is_Z(cinfo)) {
3131 struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS;
3132 struct ZFW_CTRL *zfw_ctrl;
3133
3134 info->port.ops = &cyz_port_ops;
3135 info->type = PORT_STARTECH;
3136
3137 zfw_ctrl = cinfo->base_addr +
3138 (readl(&firm_id->zfwctrl_addr) & 0xfffff);
3139 info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel];
3140 info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
3141
3142 if (cinfo->hw_ver == ZO_V1)
3143 info->xmit_fifo_size = CYZ_FIFO_SIZE;
3144 else
3145 info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
3146 #ifdef CONFIG_CYZ_INTR
3147 setup_timer(&cyz_rx_full_timer[port],
3148 cyz_rx_restart, (unsigned long)info);
3149 #endif
3150 } else {
3151 unsigned short chip_number;
3152 int index = cinfo->bus_index;
3153
3154 info->port.ops = &cyy_port_ops;
3155 info->type = PORT_CIRRUS;
3156 info->xmit_fifo_size = CyMAX_CHAR_FIFO;
3157 info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
3158 info->cor2 = CyETC;
3159 info->cor3 = 0x08; /* _very_ small rcv threshold */
3160
3161 chip_number = channel / CyPORTS_PER_CHIP;
3162 info->u.cyy.base_addr = cinfo->base_addr +
3163 (cy_chip_offset[chip_number] << index);
3164 info->chip_rev = cyy_readb(info, CyGFRCR);
3165
3166 if (info->chip_rev >= CD1400_REV_J) {
3167 /* It is a CD1400 rev. J or later */
3168 info->tbpr = baud_bpr_60[13]; /* Tx BPR */
3169 info->tco = baud_co_60[13]; /* Tx CO */
3170 info->rbpr = baud_bpr_60[13]; /* Rx BPR */
3171 info->rco = baud_co_60[13]; /* Rx CO */
3172 info->rtsdtr_inv = 1;
3173 } else {
3174 info->tbpr = baud_bpr_25[13]; /* Tx BPR */
3175 info->tco = baud_co_25[13]; /* Tx CO */
3176 info->rbpr = baud_bpr_25[13]; /* Rx BPR */
3177 info->rco = baud_co_25[13]; /* Rx CO */
3178 info->rtsdtr_inv = 0;
3179 }
3180 info->read_status_mask = CyTIMEOUT | CySPECHAR |
3181 CyBREAK | CyPARITY | CyFRAME | CyOVERRUN;
3182 }
3183
3184 }
3185
3186 #ifndef CONFIG_CYZ_INTR
3187 if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) {
3188 mod_timer(&cyz_timerlist, jiffies + 1);
3189 #ifdef CY_PCI_DEBUG
3190 printk(KERN_DEBUG "Cyclades-Z polling initialized\n");
3191 #endif
3192 }
3193 #endif
3194 return 0;
3195 }
3196
3197 /* initialize chips on Cyclom-Y card -- return number of valid
3198 chips (which is number of ports/4) */
3199 static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr,
3200 int index)
3201 {
3202 unsigned int chip_number;
3203 void __iomem *base_addr;
3204
3205 cy_writeb(true_base_addr + (Cy_HwReset << index), 0);
3206 /* Cy_HwReset is 0x1400 */
3207 cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0);
3208 /* Cy_ClrIntr is 0x1800 */
3209 udelay(500L);
3210
3211 for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD;
3212 chip_number++) {
3213 base_addr =
3214 true_base_addr + (cy_chip_offset[chip_number] << index);
3215 mdelay(1);
3216 if (readb(base_addr + (CyCCR << index)) != 0x00) {
3217 /*************
3218 printk(" chip #%d at %#6lx is never idle (CCR != 0)\n",
3219 chip_number, (unsigned long)base_addr);
3220 *************/
3221 return chip_number;
3222 }
3223
3224 cy_writeb(base_addr + (CyGFRCR << index), 0);
3225 udelay(10L);
3226
3227 /* The Cyclom-16Y does not decode address bit 9 and therefore
3228 cannot distinguish between references to chip 0 and a non-
3229 existent chip 4. If the preceding clearing of the supposed
3230 chip 4 GFRCR register appears at chip 0, there is no chip 4
3231 and this must be a Cyclom-16Y, not a Cyclom-32Ye.
3232 */
3233 if (chip_number == 4 && readb(true_base_addr +
3234 (cy_chip_offset[0] << index) +
3235 (CyGFRCR << index)) == 0) {
3236 return chip_number;
3237 }
3238
3239 cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET);
3240 mdelay(1);
3241
3242 if (readb(base_addr + (CyGFRCR << index)) == 0x00) {
3243 /*
3244 printk(" chip #%d at %#6lx is not responding ",
3245 chip_number, (unsigned long)base_addr);
3246 printk("(GFRCR stayed 0)\n",
3247 */
3248 return chip_number;
3249 }
3250 if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) !=
3251 0x40) {
3252 /*
3253 printk(" chip #%d at %#6lx is not valid (GFRCR == "
3254 "%#2x)\n",
3255 chip_number, (unsigned long)base_addr,
3256 base_addr[CyGFRCR<<index]);
3257 */
3258 return chip_number;
3259 }
3260 cy_writeb(base_addr + (CyGCR << index), CyCH0_SERIAL);
3261 if (readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) {
3262 /* It is a CD1400 rev. J or later */
3263 /* Impossible to reach 5ms with this chip.
3264 Changed to 2ms instead (f = 500 Hz). */
3265 cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS);
3266 } else {
3267 /* f = 200 Hz */
3268 cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS);
3269 }
3270
3271 /*
3272 printk(" chip #%d at %#6lx is rev 0x%2x\n",
3273 chip_number, (unsigned long)base_addr,
3274 readb(base_addr+(CyGFRCR<<index)));
3275 */
3276 }
3277 return chip_number;
3278 } /* cyy_init_card */
3279
3280 /*
3281 * ---------------------------------------------------------------------
3282 * cy_detect_isa() - Probe for Cyclom-Y/ISA boards.
3283 * sets global variables and return the number of ISA boards found.
3284 * ---------------------------------------------------------------------
3285 */
3286 static int __init cy_detect_isa(void)
3287 {
3288 #ifdef CONFIG_ISA
3289 struct cyclades_card *card;
3290 unsigned short cy_isa_irq, nboard;
3291 void __iomem *cy_isa_address;
3292 unsigned short i, j, k, cy_isa_nchan;
3293 int isparam = 0;
3294
3295 nboard = 0;
3296
3297 /* Check for module parameters */
3298 for (i = 0; i < NR_CARDS; i++) {
3299 if (maddr[i] || i) {
3300 isparam = 1;
3301 cy_isa_addresses[i] = maddr[i];
3302 }
3303 if (!maddr[i])
3304 break;
3305 }
3306
3307 /* scan the address table probing for Cyclom-Y/ISA boards */
3308 for (i = 0; i < NR_ISA_ADDRS; i++) {
3309 unsigned int isa_address = cy_isa_addresses[i];
3310 if (isa_address == 0x0000)
3311 return nboard;
3312
3313 /* probe for CD1400... */
3314 cy_isa_address = ioremap_nocache(isa_address, CyISA_Ywin);
3315 if (cy_isa_address == NULL) {
3316 printk(KERN_ERR "Cyclom-Y/ISA: can't remap base "
3317 "address\n");
3318 continue;
3319 }
3320 cy_isa_nchan = CyPORTS_PER_CHIP *
3321 cyy_init_card(cy_isa_address, 0);
3322 if (cy_isa_nchan == 0) {
3323 iounmap(cy_isa_address);
3324 continue;
3325 }
3326
3327 if (isparam && i < NR_CARDS && irq[i])
3328 cy_isa_irq = irq[i];
3329 else
3330 /* find out the board's irq by probing */
3331 cy_isa_irq = detect_isa_irq(cy_isa_address);
3332 if (cy_isa_irq == 0) {
3333 printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the "
3334 "IRQ could not be detected.\n",
3335 (unsigned long)cy_isa_address);
3336 iounmap(cy_isa_address);
3337 continue;
3338 }
3339
3340 if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) {
3341 printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
3342 "more channels are available. Change NR_PORTS "
3343 "in cyclades.c and recompile kernel.\n",
3344 (unsigned long)cy_isa_address);
3345 iounmap(cy_isa_address);
3346 return nboard;
3347 }
3348 /* fill the next cy_card structure available */
3349 for (j = 0; j < NR_CARDS; j++) {
3350 card = &cy_card[j];
3351 if (card->base_addr == NULL)
3352 break;
3353 }
3354 if (j == NR_CARDS) { /* no more cy_cards available */
3355 printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
3356 "more cards can be used. Change NR_CARDS in "
3357 "cyclades.c and recompile kernel.\n",
3358 (unsigned long)cy_isa_address);
3359 iounmap(cy_isa_address);
3360 return nboard;
3361 }
3362
3363 /* allocate IRQ */
3364 if (request_irq(cy_isa_irq, cyy_interrupt,
3365 0, "Cyclom-Y", card)) {
3366 printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
3367 "could not allocate IRQ#%d.\n",
3368 (unsigned long)cy_isa_address, cy_isa_irq);
3369 iounmap(cy_isa_address);
3370 return nboard;
3371 }
3372
3373 /* set cy_card */
3374 card->base_addr = cy_isa_address;
3375 card->ctl_addr.p9050 = NULL;
3376 card->irq = (int)cy_isa_irq;
3377 card->bus_index = 0;
3378 card->first_line = cy_next_channel;
3379 card->num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
3380 card->nports = cy_isa_nchan;
3381 if (cy_init_card(card)) {
3382 card->base_addr = NULL;
3383 free_irq(cy_isa_irq, card);
3384 iounmap(cy_isa_address);
3385 continue;
3386 }
3387 nboard++;
3388
3389 printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: "
3390 "%d channels starting from port %d\n",
3391 j + 1, (unsigned long)cy_isa_address,
3392 (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
3393 cy_isa_irq, cy_isa_nchan, cy_next_channel);
3394
3395 for (k = 0, j = cy_next_channel;
3396 j < cy_next_channel + cy_isa_nchan; j++, k++)
3397 tty_port_register_device(&card->ports[k].port,
3398 cy_serial_driver, j, NULL);
3399 cy_next_channel += cy_isa_nchan;
3400 }
3401 return nboard;
3402 #else
3403 return 0;
3404 #endif /* CONFIG_ISA */
3405 } /* cy_detect_isa */
3406
3407 #ifdef CONFIG_PCI
3408 static inline int __devinit cyc_isfwstr(const char *str, unsigned int size)
3409 {
3410 unsigned int a;
3411
3412 for (a = 0; a < size && *str; a++, str++)
3413 if (*str & 0x80)
3414 return -EINVAL;
3415
3416 for (; a < size; a++, str++)
3417 if (*str)
3418 return -EINVAL;
3419
3420 return 0;
3421 }
3422
3423 static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data,
3424 unsigned int size)
3425 {
3426 for (; size > 0; size--) {
3427 cy_writel(fpga, *data++);
3428 udelay(10);
3429 }
3430 }
3431
3432 static void __devinit plx_init(struct pci_dev *pdev, int irq,
3433 struct RUNTIME_9060 __iomem *addr)
3434 {
3435 /* Reset PLX */
3436 cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000);
3437 udelay(100L);
3438 cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000);
3439
3440 /* Reload Config. Registers from EEPROM */
3441 cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000);
3442 udelay(100L);
3443 cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000);
3444
3445 /* For some yet unknown reason, once the PLX9060 reloads the EEPROM,
3446 * the IRQ is lost and, thus, we have to re-write it to the PCI config.
3447 * registers. This will remain here until we find a permanent fix.
3448 */
3449 pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
3450 }
3451
3452 static int __devinit __cyz_load_fw(const struct firmware *fw,
3453 const char *name, const u32 mailbox, void __iomem *base,
3454 void __iomem *fpga)
3455 {
3456 const void *ptr = fw->data;
3457 const struct zfile_header *h = ptr;
3458 const struct zfile_config *c, *cs;
3459 const struct zfile_block *b, *bs;
3460 unsigned int a, tmp, len = fw->size;
3461 #define BAD_FW KERN_ERR "Bad firmware: "
3462 if (len < sizeof(*h)) {
3463 printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h));
3464 return -EINVAL;
3465 }
3466
3467 cs = ptr + h->config_offset;
3468 bs = ptr + h->block_offset;
3469
3470 if ((void *)(cs + h->n_config) > ptr + len ||
3471 (void *)(bs + h->n_blocks) > ptr + len) {
3472 printk(BAD_FW "too short");
3473 return -EINVAL;
3474 }
3475
3476 if (cyc_isfwstr(h->name, sizeof(h->name)) ||
3477 cyc_isfwstr(h->date, sizeof(h->date))) {
3478 printk(BAD_FW "bad formatted header string\n");
3479 return -EINVAL;
3480 }
3481
3482 if (strncmp(name, h->name, sizeof(h->name))) {
3483 printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name);
3484 return -EINVAL;
3485 }
3486
3487 tmp = 0;
3488 for (c = cs; c < cs + h->n_config; c++) {
3489 for (a = 0; a < c->n_blocks; a++)
3490 if (c->block_list[a] > h->n_blocks) {
3491 printk(BAD_FW "bad block ref number in cfgs\n");
3492 return -EINVAL;
3493 }
3494 if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */
3495 tmp++;
3496 }
3497 if (!tmp) {
3498 printk(BAD_FW "nothing appropriate\n");
3499 return -EINVAL;
3500 }
3501
3502 for (b = bs; b < bs + h->n_blocks; b++)
3503 if (b->file_offset + b->size > len) {
3504 printk(BAD_FW "bad block data offset\n");
3505 return -EINVAL;
3506 }
3507
3508 /* everything is OK, let's seek'n'load it */
3509 for (c = cs; c < cs + h->n_config; c++)
3510 if (c->mailbox == mailbox && c->function == 0)
3511 break;
3512
3513 for (a = 0; a < c->n_blocks; a++) {
3514 b = &bs[c->block_list[a]];
3515 if (b->type == ZBLOCK_FPGA) {
3516 if (fpga != NULL)
3517 cyz_fpga_copy(fpga, ptr + b->file_offset,
3518 b->size);
3519 } else {
3520 if (base != NULL)
3521 memcpy_toio(base + b->ram_offset,
3522 ptr + b->file_offset, b->size);
3523 }
3524 }
3525 #undef BAD_FW
3526 return 0;
3527 }
3528
3529 static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
3530 struct RUNTIME_9060 __iomem *ctl_addr, int irq)
3531 {
3532 const struct firmware *fw;
3533 struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS;
3534 struct CUSTOM_REG __iomem *cust = base_addr;
3535 struct ZFW_CTRL __iomem *pt_zfwctrl;
3536 void __iomem *tmp;
3537 u32 mailbox, status, nchan;
3538 unsigned int i;
3539 int retval;
3540
3541 retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev);
3542 if (retval) {
3543 dev_err(&pdev->dev, "can't get firmware\n");
3544 goto err;
3545 }
3546
3547 /* Check whether the firmware is already loaded and running. If
3548 positive, skip this board */
3549 if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
3550 u32 cntval = readl(base_addr + 0x190);
3551
3552 udelay(100);
3553 if (cntval != readl(base_addr + 0x190)) {
3554 /* FW counter is working, FW is running */
3555 dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. "
3556 "Skipping board.\n");
3557 retval = 0;
3558 goto err_rel;
3559 }
3560 }
3561
3562 /* start boot */
3563 cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) &
3564 ~0x00030800UL);
3565
3566 mailbox = readl(&ctl_addr->mail_box_0);
3567
3568 if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) {
3569 /* stops CPU and set window to beginning of RAM */
3570 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
3571 cy_writel(&cust->cpu_stop, 0);
3572 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3573 udelay(100);
3574 }
3575
3576 plx_init(pdev, irq, ctl_addr);
3577
3578 if (mailbox != 0) {
3579 /* load FPGA */
3580 retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL,
3581 base_addr);
3582 if (retval)
3583 goto err_rel;
3584 if (!__cyz_fpga_loaded(ctl_addr)) {
3585 dev_err(&pdev->dev, "fw upload successful, but fw is "
3586 "not loaded\n");
3587 goto err_rel;
3588 }
3589 }
3590
3591 /* stops CPU and set window to beginning of RAM */
3592 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
3593 cy_writel(&cust->cpu_stop, 0);
3594 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3595 udelay(100);
3596
3597 /* clear memory */
3598 for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
3599 cy_writeb(tmp, 255);
3600 if (mailbox != 0) {
3601 /* set window to last 512K of RAM */
3602 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE);
3603 for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
3604 cy_writeb(tmp, 255);
3605 /* set window to beginning of RAM */
3606 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3607 }
3608
3609 retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL);
3610 release_firmware(fw);
3611 if (retval)
3612 goto err;
3613
3614 /* finish boot and start boards */
3615 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
3616 cy_writel(&cust->cpu_start, 0);
3617 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3618 i = 0;
3619 while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40)
3620 msleep(100);
3621 if (status != ZFIRM_ID) {
3622 if (status == ZFIRM_HLT) {
3623 dev_err(&pdev->dev, "you need an external power supply "
3624 "for this number of ports. Firmware halted and "
3625 "board reset.\n");
3626 retval = -EIO;
3627 goto err;
3628 }
3629 dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting "
3630 "some more time\n", status);
3631 while ((status = readl(&fid->signature)) != ZFIRM_ID &&
3632 i++ < 200)
3633 msleep(100);
3634 if (status != ZFIRM_ID) {
3635 dev_err(&pdev->dev, "Board not started in 20 seconds! "
3636 "Giving up. (fid->signature = 0x%x)\n",
3637 status);
3638 dev_info(&pdev->dev, "*** Warning ***: if you are "
3639 "upgrading the FW, please power cycle the "
3640 "system before loading the new FW to the "
3641 "Cyclades-Z.\n");
3642
3643 if (__cyz_fpga_loaded(ctl_addr))
3644 plx_init(pdev, irq, ctl_addr);
3645
3646 retval = -EIO;
3647 goto err;
3648 }
3649 dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n",
3650 i / 10);
3651 }
3652 pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr);
3653
3654 dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n",
3655 base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
3656 base_addr + readl(&fid->zfwctrl_addr));
3657
3658 nchan = readl(&pt_zfwctrl->board_ctrl.n_channel);
3659 dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
3660 readl(&pt_zfwctrl->board_ctrl.fw_version), nchan);
3661
3662 if (nchan == 0) {
3663 dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
3664 "check the connection between the Z host card and the "
3665 "serial expanders.\n");
3666
3667 if (__cyz_fpga_loaded(ctl_addr))
3668 plx_init(pdev, irq, ctl_addr);
3669
3670 dev_info(&pdev->dev, "Null number of ports detected. Board "
3671 "reset.\n");
3672 retval = 0;
3673 goto err;
3674 }
3675
3676 cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX);
3677 cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION);
3678
3679 /*
3680 Early firmware failed to start looking for commands.
3681 This enables firmware interrupts for those commands.
3682 */
3683 cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
3684 (1 << 17));
3685 cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
3686 0x00030800UL);
3687
3688 return nchan;
3689 err_rel:
3690 release_firmware(fw);
3691 err:
3692 return retval;
3693 }
3694
3695 static int __devinit cy_pci_probe(struct pci_dev *pdev,
3696 const struct pci_device_id *ent)
3697 {
3698 struct cyclades_card *card;
3699 void __iomem *addr0 = NULL, *addr2 = NULL;
3700 char *card_name = NULL;
3701 u32 uninitialized_var(mailbox);
3702 unsigned int device_id, nchan = 0, card_no, i, j;
3703 unsigned char plx_ver;
3704 int retval, irq;
3705
3706 retval = pci_enable_device(pdev);
3707 if (retval) {
3708 dev_err(&pdev->dev, "cannot enable device\n");
3709 goto err;
3710 }
3711
3712 /* read PCI configuration area */
3713 irq = pdev->irq;
3714 device_id = pdev->device & ~PCI_DEVICE_ID_MASK;
3715
3716 #if defined(__alpha__)
3717 if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */
3718 dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low "
3719 "addresses on Alpha systems.\n");
3720 retval = -EIO;
3721 goto err_dis;
3722 }
3723 #endif
3724 if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) {
3725 dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low "
3726 "addresses\n");
3727 retval = -EIO;
3728 goto err_dis;
3729 }
3730
3731 if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
3732 dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring "
3733 "it...\n");
3734 pdev->resource[2].flags &= ~IORESOURCE_IO;
3735 }
3736
3737 retval = pci_request_regions(pdev, "cyclades");
3738 if (retval) {
3739 dev_err(&pdev->dev, "failed to reserve resources\n");
3740 goto err_dis;
3741 }
3742
3743 retval = -EIO;
3744 if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
3745 device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
3746 card_name = "Cyclom-Y";
3747
3748 addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
3749 CyPCI_Yctl);
3750 if (addr0 == NULL) {
3751 dev_err(&pdev->dev, "can't remap ctl region\n");
3752 goto err_reg;
3753 }
3754 addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
3755 CyPCI_Ywin);
3756 if (addr2 == NULL) {
3757 dev_err(&pdev->dev, "can't remap base region\n");
3758 goto err_unmap;
3759 }
3760
3761 nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1);
3762 if (nchan == 0) {
3763 dev_err(&pdev->dev, "Cyclom-Y PCI host card with no "
3764 "Serial-Modules\n");
3765 goto err_unmap;
3766 }
3767 } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) {
3768 struct RUNTIME_9060 __iomem *ctl_addr;
3769
3770 ctl_addr = addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
3771 CyPCI_Zctl);
3772 if (addr0 == NULL) {
3773 dev_err(&pdev->dev, "can't remap ctl region\n");
3774 goto err_reg;
3775 }
3776
3777 /* Disable interrupts on the PLX before resetting it */
3778 cy_writew(&ctl_addr->intr_ctrl_stat,
3779 readw(&ctl_addr->intr_ctrl_stat) & ~0x0900);
3780
3781 plx_init(pdev, irq, addr0);
3782
3783 mailbox = readl(&ctl_addr->mail_box_0);
3784
3785 addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
3786 mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin);
3787 if (addr2 == NULL) {
3788 dev_err(&pdev->dev, "can't remap base region\n");
3789 goto err_unmap;
3790 }
3791
3792 if (mailbox == ZE_V1) {
3793 card_name = "Cyclades-Ze";
3794 } else {
3795 card_name = "Cyclades-8Zo";
3796 #ifdef CY_PCI_DEBUG
3797 if (mailbox == ZO_V1) {
3798 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
3799 dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA "
3800 "id %lx, ver %lx\n", (ulong)(0xff &
3801 readl(&((struct CUSTOM_REG *)addr2)->
3802 fpga_id)), (ulong)(0xff &
3803 readl(&((struct CUSTOM_REG *)addr2)->
3804 fpga_version)));
3805 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
3806 } else {
3807 dev_info(&pdev->dev, "Cyclades-Z/PCI: New "
3808 "Cyclades-Z board. FPGA not loaded\n");
3809 }
3810 #endif
3811 /* The following clears the firmware id word. This
3812 ensures that the driver will not attempt to talk to
3813 the board until it has been properly initialized.
3814 */
3815 if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
3816 cy_writel(addr2 + ID_ADDRESS, 0L);
3817 }
3818
3819 retval = cyz_load_fw(pdev, addr2, addr0, irq);
3820 if (retval <= 0)
3821 goto err_unmap;
3822 nchan = retval;
3823 }
3824
3825 if ((cy_next_channel + nchan) > NR_PORTS) {
3826 dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
3827 "channels are available. Change NR_PORTS in "
3828 "cyclades.c and recompile kernel.\n");
3829 goto err_unmap;
3830 }
3831 /* fill the next cy_card structure available */
3832 for (card_no = 0; card_no < NR_CARDS; card_no++) {
3833 card = &cy_card[card_no];
3834 if (card->base_addr == NULL)
3835 break;
3836 }
3837 if (card_no == NR_CARDS) { /* no more cy_cards available */
3838 dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
3839 "more cards can be used. Change NR_CARDS in "
3840 "cyclades.c and recompile kernel.\n");
3841 goto err_unmap;
3842 }
3843
3844 if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
3845 device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
3846 /* allocate IRQ */
3847 retval = request_irq(irq, cyy_interrupt,
3848 IRQF_SHARED, "Cyclom-Y", card);
3849 if (retval) {
3850 dev_err(&pdev->dev, "could not allocate IRQ\n");
3851 goto err_unmap;
3852 }
3853 card->num_chips = nchan / CyPORTS_PER_CHIP;
3854 } else {
3855 struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
3856 struct ZFW_CTRL __iomem *zfw_ctrl;
3857
3858 zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
3859
3860 card->hw_ver = mailbox;
3861 card->num_chips = (unsigned int)-1;
3862 card->board_ctrl = &zfw_ctrl->board_ctrl;
3863 #ifdef CONFIG_CYZ_INTR
3864 /* allocate IRQ only if board has an IRQ */
3865 if (irq != 0 && irq != 255) {
3866 retval = request_irq(irq, cyz_interrupt,
3867 IRQF_SHARED, "Cyclades-Z", card);
3868 if (retval) {
3869 dev_err(&pdev->dev, "could not allocate IRQ\n");
3870 goto err_unmap;
3871 }
3872 }
3873 #endif /* CONFIG_CYZ_INTR */
3874 }
3875
3876 /* set cy_card */
3877 card->base_addr = addr2;
3878 card->ctl_addr.p9050 = addr0;
3879 card->irq = irq;
3880 card->bus_index = 1;
3881 card->first_line = cy_next_channel;
3882 card->nports = nchan;
3883 retval = cy_init_card(card);
3884 if (retval)
3885 goto err_null;
3886
3887 pci_set_drvdata(pdev, card);
3888
3889 if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
3890 device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
3891 /* enable interrupts in the PCI interface */
3892 plx_ver = readb(addr2 + CyPLX_VER) & 0x0f;
3893 switch (plx_ver) {
3894 case PLX_9050:
3895 cy_writeb(addr0 + 0x4c, 0x43);
3896 break;
3897
3898 case PLX_9060:
3899 case PLX_9080:
3900 default: /* Old boards, use PLX_9060 */
3901 {
3902 struct RUNTIME_9060 __iomem *ctl_addr = addr0;
3903 plx_init(pdev, irq, ctl_addr);
3904 cy_writew(&ctl_addr->intr_ctrl_stat,
3905 readw(&ctl_addr->intr_ctrl_stat) | 0x0900);
3906 break;
3907 }
3908 }
3909 }
3910
3911 dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
3912 "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel);
3913 for (j = 0, i = cy_next_channel; i < cy_next_channel + nchan; i++, j++)
3914 tty_port_register_device(&card->ports[j].port,
3915 cy_serial_driver, i, &pdev->dev);
3916 cy_next_channel += nchan;
3917
3918 return 0;
3919 err_null:
3920 card->base_addr = NULL;
3921 free_irq(irq, card);
3922 err_unmap:
3923 iounmap(addr0);
3924 if (addr2)
3925 iounmap(addr2);
3926 err_reg:
3927 pci_release_regions(pdev);
3928 err_dis:
3929 pci_disable_device(pdev);
3930 err:
3931 return retval;
3932 }
3933
3934 static void __devexit cy_pci_remove(struct pci_dev *pdev)
3935 {
3936 struct cyclades_card *cinfo = pci_get_drvdata(pdev);
3937 unsigned int i, channel;
3938
3939 /* non-Z with old PLX */
3940 if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
3941 PLX_9050)
3942 cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0);
3943 else
3944 #ifndef CONFIG_CYZ_INTR
3945 if (!cy_is_Z(cinfo))
3946 #endif
3947 cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat,
3948 readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) &
3949 ~0x0900);
3950
3951 iounmap(cinfo->base_addr);
3952 if (cinfo->ctl_addr.p9050)
3953 iounmap(cinfo->ctl_addr.p9050);
3954 if (cinfo->irq
3955 #ifndef CONFIG_CYZ_INTR
3956 && !cy_is_Z(cinfo)
3957 #endif /* CONFIG_CYZ_INTR */
3958 )
3959 free_irq(cinfo->irq, cinfo);
3960 pci_release_regions(pdev);
3961
3962 cinfo->base_addr = NULL;
3963 for (channel = 0, i = cinfo->first_line; i < cinfo->first_line +
3964 cinfo->nports; i++, channel++) {
3965 tty_unregister_device(cy_serial_driver, i);
3966 tty_port_destroy(&cinfo->ports[channel].port);
3967 }
3968 cinfo->nports = 0;
3969 kfree(cinfo->ports);
3970 }
3971
3972 static struct pci_driver cy_pci_driver = {
3973 .name = "cyclades",
3974 .id_table = cy_pci_dev_id,
3975 .probe = cy_pci_probe,
3976 .remove = __devexit_p(cy_pci_remove)
3977 };
3978 #endif
3979
3980 static int cyclades_proc_show(struct seq_file *m, void *v)
3981 {
3982 struct cyclades_port *info;
3983 unsigned int i, j;
3984 __u32 cur_jifs = jiffies;
3985
3986 seq_puts(m, "Dev TimeOpen BytesOut IdleOut BytesIn "
3987 "IdleIn Overruns Ldisc\n");
3988
3989 /* Output one line for each known port */
3990 for (i = 0; i < NR_CARDS; i++)
3991 for (j = 0; j < cy_card[i].nports; j++) {
3992 info = &cy_card[i].ports[j];
3993
3994 if (info->port.count) {
3995 /* XXX is the ldisc num worth this? */
3996 struct tty_struct *tty;
3997 struct tty_ldisc *ld;
3998 int num = 0;
3999 tty = tty_port_tty_get(&info->port);
4000 if (tty) {
4001 ld = tty_ldisc_ref(tty);
4002 if (ld) {
4003 num = ld->ops->num;
4004 tty_ldisc_deref(ld);
4005 }
4006 tty_kref_put(tty);
4007 }
4008 seq_printf(m, "%3d %8lu %10lu %8lu "
4009 "%10lu %8lu %9lu %6d\n", info->line,
4010 (cur_jifs - info->idle_stats.in_use) /
4011 HZ, info->idle_stats.xmit_bytes,
4012 (cur_jifs - info->idle_stats.xmit_idle)/
4013 HZ, info->idle_stats.recv_bytes,
4014 (cur_jifs - info->idle_stats.recv_idle)/
4015 HZ, info->idle_stats.overruns,
4016 num);
4017 } else
4018 seq_printf(m, "%3d %8lu %10lu %8lu "
4019 "%10lu %8lu %9lu %6ld\n",
4020 info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
4021 }
4022 return 0;
4023 }
4024
4025 static int cyclades_proc_open(struct inode *inode, struct file *file)
4026 {
4027 return single_open(file, cyclades_proc_show, NULL);
4028 }
4029
4030 static const struct file_operations cyclades_proc_fops = {
4031 .owner = THIS_MODULE,
4032 .open = cyclades_proc_open,
4033 .read = seq_read,
4034 .llseek = seq_lseek,
4035 .release = single_release,
4036 };
4037
4038 /* The serial driver boot-time initialization code!
4039 Hardware I/O ports are mapped to character special devices on a
4040 first found, first allocated manner. That is, this code searches
4041 for Cyclom cards in the system. As each is found, it is probed
4042 to discover how many chips (and thus how many ports) are present.
4043 These ports are mapped to the tty ports 32 and upward in monotonic
4044 fashion. If an 8-port card is replaced with a 16-port card, the
4045 port mapping on a following card will shift.
4046
4047 This approach is different from what is used in the other serial
4048 device driver because the Cyclom is more properly a multiplexer,
4049 not just an aggregation of serial ports on one card.
4050
4051 If there are more cards with more ports than have been
4052 statically allocated above, a warning is printed and the
4053 extra ports are ignored.
4054 */
4055
4056 static const struct tty_operations cy_ops = {
4057 .open = cy_open,
4058 .close = cy_close,
4059 .write = cy_write,
4060 .put_char = cy_put_char,
4061 .flush_chars = cy_flush_chars,
4062 .write_room = cy_write_room,
4063 .chars_in_buffer = cy_chars_in_buffer,
4064 .flush_buffer = cy_flush_buffer,
4065 .ioctl = cy_ioctl,
4066 .throttle = cy_throttle,
4067 .unthrottle = cy_unthrottle,
4068 .set_termios = cy_set_termios,
4069 .stop = cy_stop,
4070 .start = cy_start,
4071 .hangup = cy_hangup,
4072 .break_ctl = cy_break,
4073 .wait_until_sent = cy_wait_until_sent,
4074 .tiocmget = cy_tiocmget,
4075 .tiocmset = cy_tiocmset,
4076 .get_icount = cy_get_icount,
4077 .proc_fops = &cyclades_proc_fops,
4078 };
4079
4080 static int __init cy_init(void)
4081 {
4082 unsigned int nboards;
4083 int retval = -ENOMEM;
4084
4085 cy_serial_driver = alloc_tty_driver(NR_PORTS);
4086 if (!cy_serial_driver)
4087 goto err;
4088
4089 printk(KERN_INFO "Cyclades driver " CY_VERSION "\n");
4090
4091 /* Initialize the tty_driver structure */
4092
4093 cy_serial_driver->driver_name = "cyclades";
4094 cy_serial_driver->name = "ttyC";
4095 cy_serial_driver->major = CYCLADES_MAJOR;
4096 cy_serial_driver->minor_start = 0;
4097 cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4098 cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
4099 cy_serial_driver->init_termios = tty_std_termios;
4100 cy_serial_driver->init_termios.c_cflag =
4101 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4102 cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
4103 tty_set_operations(cy_serial_driver, &cy_ops);
4104
4105 retval = tty_register_driver(cy_serial_driver);
4106 if (retval) {
4107 printk(KERN_ERR "Couldn't register Cyclades serial driver\n");
4108 goto err_frtty;
4109 }
4110
4111 /* the code below is responsible to find the boards. Each different
4112 type of board has its own detection routine. If a board is found,
4113 the next cy_card structure available is set by the detection
4114 routine. These functions are responsible for checking the
4115 availability of cy_card and cy_port data structures and updating
4116 the cy_next_channel. */
4117
4118 /* look for isa boards */
4119 nboards = cy_detect_isa();
4120
4121 #ifdef CONFIG_PCI
4122 /* look for pci boards */
4123 retval = pci_register_driver(&cy_pci_driver);
4124 if (retval && !nboards) {
4125 tty_unregister_driver(cy_serial_driver);
4126 goto err_frtty;
4127 }
4128 #endif
4129
4130 return 0;
4131 err_frtty:
4132 put_tty_driver(cy_serial_driver);
4133 err:
4134 return retval;
4135 } /* cy_init */
4136
4137 static void __exit cy_cleanup_module(void)
4138 {
4139 struct cyclades_card *card;
4140 unsigned int i, e1;
4141
4142 #ifndef CONFIG_CYZ_INTR
4143 del_timer_sync(&cyz_timerlist);
4144 #endif /* CONFIG_CYZ_INTR */
4145
4146 e1 = tty_unregister_driver(cy_serial_driver);
4147 if (e1)
4148 printk(KERN_ERR "failed to unregister Cyclades serial "
4149 "driver(%d)\n", e1);
4150
4151 #ifdef CONFIG_PCI
4152 pci_unregister_driver(&cy_pci_driver);
4153 #endif
4154
4155 for (i = 0; i < NR_CARDS; i++) {
4156 card = &cy_card[i];
4157 if (card->base_addr) {
4158 /* clear interrupt */
4159 cy_writeb(card->base_addr + Cy_ClrIntr, 0);
4160 iounmap(card->base_addr);
4161 if (card->ctl_addr.p9050)
4162 iounmap(card->ctl_addr.p9050);
4163 if (card->irq
4164 #ifndef CONFIG_CYZ_INTR
4165 && !cy_is_Z(card)
4166 #endif /* CONFIG_CYZ_INTR */
4167 )
4168 free_irq(card->irq, card);
4169 for (e1 = card->first_line; e1 < card->first_line +
4170 card->nports; e1++)
4171 tty_unregister_device(cy_serial_driver, e1);
4172 kfree(card->ports);
4173 }
4174 }
4175
4176 put_tty_driver(cy_serial_driver);
4177 } /* cy_cleanup_module */
4178
4179 module_init(cy_init);
4180 module_exit(cy_cleanup_module);
4181
4182 MODULE_LICENSE("GPL");
4183 MODULE_VERSION(CY_VERSION);
4184 MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR);
4185 MODULE_FIRMWARE("cyzfirm.bin");
ubuntu-bionic-kernel mirror