]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/tty/mxser.c
projects / mirror_ubuntu-artful-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
[mirror_ubuntu-artful-kernel.git] / drivers / tty / mxser.c
1 /*
2 * mxser.c -- MOXA Smartio/Industio family multiport serial driver.
3 *
4 * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com).
5 * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com>
6 *
7 * This code is loosely based on the 1.8 moxa driver which is based on
8 * Linux serial driver, written by Linus Torvalds, Theodore T'so and
9 * others.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
17 * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
18 * www.moxa.com.
19 * - Fixed x86_64 cleanness
20 */
21
22 #include <linux/module.h>
23 #include <linux/errno.h>
24 #include <linux/signal.h>
25 #include <linux/sched.h>
26 #include <linux/timer.h>
27 #include <linux/interrupt.h>
28 #include <linux/tty.h>
29 #include <linux/tty_flip.h>
30 #include <linux/serial.h>
31 #include <linux/serial_reg.h>
32 #include <linux/major.h>
33 #include <linux/string.h>
34 #include <linux/fcntl.h>
35 #include <linux/ptrace.h>
36 #include <linux/ioport.h>
37 #include <linux/mm.h>
38 #include <linux/delay.h>
39 #include <linux/pci.h>
40 #include <linux/bitops.h>
41 #include <linux/slab.h>
42 #include <linux/ratelimit.h>
43
44 #include <asm/io.h>
45 #include <asm/irq.h>
46 #include <linux/uaccess.h>
47
48 #include "mxser.h"
49
50 #define MXSER_VERSION "2.0.5" /* 1.14 */
51 #define MXSERMAJOR 174
52
53 #define MXSER_BOARDS 4 /* Max. boards */
54 #define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
55 #define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
56 #define MXSER_ISR_PASS_LIMIT 100
57
58 /*CheckIsMoxaMust return value*/
59 #define MOXA_OTHER_UART 0x00
60 #define MOXA_MUST_MU150_HWID 0x01
61 #define MOXA_MUST_MU860_HWID 0x02
62
63 #define WAKEUP_CHARS 256
64
65 #define UART_MCR_AFE 0x20
66 #define UART_LSR_SPECIAL 0x1E
67
68 #define PCI_DEVICE_ID_POS104UL 0x1044
69 #define PCI_DEVICE_ID_CB108 0x1080
70 #define PCI_DEVICE_ID_CP102UF 0x1023
71 #define PCI_DEVICE_ID_CP112UL 0x1120
72 #define PCI_DEVICE_ID_CB114 0x1142
73 #define PCI_DEVICE_ID_CP114UL 0x1143
74 #define PCI_DEVICE_ID_CB134I 0x1341
75 #define PCI_DEVICE_ID_CP138U 0x1380
76
77
78 #define C168_ASIC_ID 1
79 #define C104_ASIC_ID 2
80 #define C102_ASIC_ID 0xB
81 #define CI132_ASIC_ID 4
82 #define CI134_ASIC_ID 3
83 #define CI104J_ASIC_ID 5
84
85 #define MXSER_HIGHBAUD 1
86 #define MXSER_HAS2 2
87
88 /* This is only for PCI */
89 static const struct {
90 int type;
91 int tx_fifo;
92 int rx_fifo;
93 int xmit_fifo_size;
94 int rx_high_water;
95 int rx_trigger;
96 int rx_low_water;
97 long max_baud;
98 } Gpci_uart_info[] = {
99 {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
100 {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
101 {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
102 };
103 #define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info)
104
105 struct mxser_cardinfo {
106 char *name;
107 unsigned int nports;
108 unsigned int flags;
109 };
110
111 static const struct mxser_cardinfo mxser_cards[] = {
112 /* 0*/ { "C168 series", 8, },
113 { "C104 series", 4, },
114 { "CI-104J series", 4, },
115 { "C168H/PCI series", 8, },
116 { "C104H/PCI series", 4, },
117 /* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */
118 { "CI-132 series", 4, MXSER_HAS2 },
119 { "CI-134 series", 4, },
120 { "CP-132 series", 2, },
121 { "CP-114 series", 4, },
122 /*10*/ { "CT-114 series", 4, },
123 { "CP-102 series", 2, MXSER_HIGHBAUD },
124 { "CP-104U series", 4, },
125 { "CP-168U series", 8, },
126 { "CP-132U series", 2, },
127 /*15*/ { "CP-134U series", 4, },
128 { "CP-104JU series", 4, },
129 { "Moxa UC7000 Serial", 8, }, /* RC7000 */
130 { "CP-118U series", 8, },
131 { "CP-102UL series", 2, },
132 /*20*/ { "CP-102U series", 2, },
133 { "CP-118EL series", 8, },
134 { "CP-168EL series", 8, },
135 { "CP-104EL series", 4, },
136 { "CB-108 series", 8, },
137 /*25*/ { "CB-114 series", 4, },
138 { "CB-134I series", 4, },
139 { "CP-138U series", 8, },
140 { "POS-104UL series", 4, },
141 { "CP-114UL series", 4, },
142 /*30*/ { "CP-102UF series", 2, },
143 { "CP-112UL series", 2, },
144 };
145
146 /* driver_data correspond to the lines in the structure above
147 see also ISA probe function before you change something */
148 static struct pci_device_id mxser_pcibrds[] = {
149 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 },
150 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 },
151 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 },
152 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 },
153 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 },
154 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 },
155 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 },
156 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 },
157 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 },
158 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 },
159 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 },
160 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 },
161 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 },
162 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 },
163 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 },
164 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 },
165 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 },
166 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 },
167 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 },
168 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 },
169 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 },
170 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 },
171 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 },
172 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 },
173 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 },
174 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 },
175 { }
176 };
177 MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
178
179 static unsigned long ioaddr[MXSER_BOARDS];
180 static int ttymajor = MXSERMAJOR;
181
182 /* Variables for insmod */
183
184 MODULE_AUTHOR("Casper Yang");
185 MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
186 module_param_hw_array(ioaddr, ulong, ioport, NULL, 0);
187 MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
188 module_param(ttymajor, int, 0);
189 MODULE_LICENSE("GPL");
190
191 struct mxser_log {
192 int tick;
193 unsigned long rxcnt[MXSER_PORTS];
194 unsigned long txcnt[MXSER_PORTS];
195 };
196
197 struct mxser_mon {
198 unsigned long rxcnt;
199 unsigned long txcnt;
200 unsigned long up_rxcnt;
201 unsigned long up_txcnt;
202 int modem_status;
203 unsigned char hold_reason;
204 };
205
206 struct mxser_mon_ext {
207 unsigned long rx_cnt[32];
208 unsigned long tx_cnt[32];
209 unsigned long up_rxcnt[32];
210 unsigned long up_txcnt[32];
211 int modem_status[32];
212
213 long baudrate[32];
214 int databits[32];
215 int stopbits[32];
216 int parity[32];
217 int flowctrl[32];
218 int fifo[32];
219 int iftype[32];
220 };
221
222 struct mxser_board;
223
224 struct mxser_port {
225 struct tty_port port;
226 struct mxser_board *board;
227
228 unsigned long ioaddr;
229 unsigned long opmode_ioaddr;
230 int max_baud;
231
232 int rx_high_water;
233 int rx_trigger; /* Rx fifo trigger level */
234 int rx_low_water;
235 int baud_base; /* max. speed */
236 int type; /* UART type */
237
238 int x_char; /* xon/xoff character */
239 int IER; /* Interrupt Enable Register */
240 int MCR; /* Modem control register */
241
242 unsigned char stop_rx;
243 unsigned char ldisc_stop_rx;
244
245 int custom_divisor;
246 unsigned char err_shadow;
247
248 struct async_icount icount; /* kernel counters for 4 input interrupts */
249 int timeout;
250
251 int read_status_mask;
252 int ignore_status_mask;
253 int xmit_fifo_size;
254 int xmit_head;
255 int xmit_tail;
256 int xmit_cnt;
257 int closing;
258
259 struct ktermios normal_termios;
260
261 struct mxser_mon mon_data;
262
263 spinlock_t slock;
264 };
265
266 struct mxser_board {
267 unsigned int idx;
268 int irq;
269 const struct mxser_cardinfo *info;
270 unsigned long vector;
271 unsigned long vector_mask;
272
273 int chip_flag;
274 int uart_type;
275
276 struct mxser_port ports[MXSER_PORTS_PER_BOARD];
277 };
278
279 struct mxser_mstatus {
280 tcflag_t cflag;
281 int cts;
282 int dsr;
283 int ri;
284 int dcd;
285 };
286
287 static struct mxser_board mxser_boards[MXSER_BOARDS];
288 static struct tty_driver *mxvar_sdriver;
289 static struct mxser_log mxvar_log;
290 static int mxser_set_baud_method[MXSER_PORTS + 1];
291
292 static void mxser_enable_must_enchance_mode(unsigned long baseio)
293 {
294 u8 oldlcr;
295 u8 efr;
296
297 oldlcr = inb(baseio + UART_LCR);
298 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
299
300 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
301 efr |= MOXA_MUST_EFR_EFRB_ENABLE;
302
303 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
304 outb(oldlcr, baseio + UART_LCR);
305 }
306
307 #ifdef CONFIG_PCI
308 static void mxser_disable_must_enchance_mode(unsigned long baseio)
309 {
310 u8 oldlcr;
311 u8 efr;
312
313 oldlcr = inb(baseio + UART_LCR);
314 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
315
316 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
317 efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;
318
319 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
320 outb(oldlcr, baseio + UART_LCR);
321 }
322 #endif
323
324 static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
325 {
326 u8 oldlcr;
327 u8 efr;
328
329 oldlcr = inb(baseio + UART_LCR);
330 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
331
332 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
333 efr &= ~MOXA_MUST_EFR_BANK_MASK;
334 efr |= MOXA_MUST_EFR_BANK0;
335
336 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
337 outb(value, baseio + MOXA_MUST_XON1_REGISTER);
338 outb(oldlcr, baseio + UART_LCR);
339 }
340
341 static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value)
342 {
343 u8 oldlcr;
344 u8 efr;
345
346 oldlcr = inb(baseio + UART_LCR);
347 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
348
349 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
350 efr &= ~MOXA_MUST_EFR_BANK_MASK;
351 efr |= MOXA_MUST_EFR_BANK0;
352
353 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
354 outb(value, baseio + MOXA_MUST_XOFF1_REGISTER);
355 outb(oldlcr, baseio + UART_LCR);
356 }
357
358 static void mxser_set_must_fifo_value(struct mxser_port *info)
359 {
360 u8 oldlcr;
361 u8 efr;
362
363 oldlcr = inb(info->ioaddr + UART_LCR);
364 outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR);
365
366 efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER);
367 efr &= ~MOXA_MUST_EFR_BANK_MASK;
368 efr |= MOXA_MUST_EFR_BANK1;
369
370 outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER);
371 outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER);
372 outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER);
373 outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER);
374 outb(oldlcr, info->ioaddr + UART_LCR);
375 }
376
377 static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
378 {
379 u8 oldlcr;
380 u8 efr;
381
382 oldlcr = inb(baseio + UART_LCR);
383 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
384
385 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
386 efr &= ~MOXA_MUST_EFR_BANK_MASK;
387 efr |= MOXA_MUST_EFR_BANK2;
388
389 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
390 outb(value, baseio + MOXA_MUST_ENUM_REGISTER);
391 outb(oldlcr, baseio + UART_LCR);
392 }
393
394 #ifdef CONFIG_PCI
395 static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
396 {
397 u8 oldlcr;
398 u8 efr;
399
400 oldlcr = inb(baseio + UART_LCR);
401 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
402
403 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
404 efr &= ~MOXA_MUST_EFR_BANK_MASK;
405 efr |= MOXA_MUST_EFR_BANK2;
406
407 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
408 *pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
409 outb(oldlcr, baseio + UART_LCR);
410 }
411 #endif
412
413 static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
414 {
415 u8 oldlcr;
416 u8 efr;
417
418 oldlcr = inb(baseio + UART_LCR);
419 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
420
421 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
422 efr &= ~MOXA_MUST_EFR_SF_MASK;
423
424 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
425 outb(oldlcr, baseio + UART_LCR);
426 }
427
428 static void mxser_enable_must_tx_software_flow_control(unsigned long baseio)
429 {
430 u8 oldlcr;
431 u8 efr;
432
433 oldlcr = inb(baseio + UART_LCR);
434 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
435
436 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
437 efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
438 efr |= MOXA_MUST_EFR_SF_TX1;
439
440 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
441 outb(oldlcr, baseio + UART_LCR);
442 }
443
444 static void mxser_disable_must_tx_software_flow_control(unsigned long baseio)
445 {
446 u8 oldlcr;
447 u8 efr;
448
449 oldlcr = inb(baseio + UART_LCR);
450 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
451
452 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
453 efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
454
455 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
456 outb(oldlcr, baseio + UART_LCR);
457 }
458
459 static void mxser_enable_must_rx_software_flow_control(unsigned long baseio)
460 {
461 u8 oldlcr;
462 u8 efr;
463
464 oldlcr = inb(baseio + UART_LCR);
465 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
466
467 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
468 efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
469 efr |= MOXA_MUST_EFR_SF_RX1;
470
471 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
472 outb(oldlcr, baseio + UART_LCR);
473 }
474
475 static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
476 {
477 u8 oldlcr;
478 u8 efr;
479
480 oldlcr = inb(baseio + UART_LCR);
481 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
482
483 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
484 efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
485
486 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
487 outb(oldlcr, baseio + UART_LCR);
488 }
489
490 #ifdef CONFIG_PCI
491 static int CheckIsMoxaMust(unsigned long io)
492 {
493 u8 oldmcr, hwid;
494 int i;
495
496 outb(0, io + UART_LCR);
497 mxser_disable_must_enchance_mode(io);
498 oldmcr = inb(io + UART_MCR);
499 outb(0, io + UART_MCR);
500 mxser_set_must_xon1_value(io, 0x11);
501 if ((hwid = inb(io + UART_MCR)) != 0) {
502 outb(oldmcr, io + UART_MCR);
503 return MOXA_OTHER_UART;
504 }
505
506 mxser_get_must_hardware_id(io, &hwid);
507 for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
508 if (hwid == Gpci_uart_info[i].type)
509 return (int)hwid;
510 }
511 return MOXA_OTHER_UART;
512 }
513 #endif
514
515 static void process_txrx_fifo(struct mxser_port *info)
516 {
517 int i;
518
519 if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
520 info->rx_trigger = 1;
521 info->rx_high_water = 1;
522 info->rx_low_water = 1;
523 info->xmit_fifo_size = 1;
524 } else
525 for (i = 0; i < UART_INFO_NUM; i++)
526 if (info->board->chip_flag == Gpci_uart_info[i].type) {
527 info->rx_trigger = Gpci_uart_info[i].rx_trigger;
528 info->rx_low_water = Gpci_uart_info[i].rx_low_water;
529 info->rx_high_water = Gpci_uart_info[i].rx_high_water;
530 info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
531 break;
532 }
533 }
534
535 static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
536 {
537 static unsigned char mxser_msr[MXSER_PORTS + 1];
538 unsigned char status = 0;
539
540 status = inb(baseaddr + UART_MSR);
541
542 mxser_msr[port] &= 0x0F;
543 mxser_msr[port] |= status;
544 status = mxser_msr[port];
545 if (mode)
546 mxser_msr[port] = 0;
547
548 return status;
549 }
550
551 static int mxser_carrier_raised(struct tty_port *port)
552 {
553 struct mxser_port *mp = container_of(port, struct mxser_port, port);
554 return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
555 }
556
557 static void mxser_dtr_rts(struct tty_port *port, int on)
558 {
559 struct mxser_port *mp = container_of(port, struct mxser_port, port);
560 unsigned long flags;
561
562 spin_lock_irqsave(&mp->slock, flags);
563 if (on)
564 outb(inb(mp->ioaddr + UART_MCR) |
565 UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
566 else
567 outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS),
568 mp->ioaddr + UART_MCR);
569 spin_unlock_irqrestore(&mp->slock, flags);
570 }
571
572 static int mxser_set_baud(struct tty_struct *tty, long newspd)
573 {
574 struct mxser_port *info = tty->driver_data;
575 int quot = 0, baud;
576 unsigned char cval;
577
578 if (!info->ioaddr)
579 return -1;
580
581 if (newspd > info->max_baud)
582 return -1;
583
584 if (newspd == 134) {
585 quot = 2 * info->baud_base / 269;
586 tty_encode_baud_rate(tty, 134, 134);
587 } else if (newspd) {
588 quot = info->baud_base / newspd;
589 if (quot == 0)
590 quot = 1;
591 baud = info->baud_base/quot;
592 tty_encode_baud_rate(tty, baud, baud);
593 } else {
594 quot = 0;
595 }
596
597 info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
598 info->timeout += HZ / 50; /* Add .02 seconds of slop */
599
600 if (quot) {
601 info->MCR |= UART_MCR_DTR;
602 outb(info->MCR, info->ioaddr + UART_MCR);
603 } else {
604 info->MCR &= ~UART_MCR_DTR;
605 outb(info->MCR, info->ioaddr + UART_MCR);
606 return 0;
607 }
608
609 cval = inb(info->ioaddr + UART_LCR);
610
611 outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */
612
613 outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */
614 outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */
615 outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
616
617 #ifdef BOTHER
618 if (C_BAUD(tty) == BOTHER) {
619 quot = info->baud_base % newspd;
620 quot *= 8;
621 if (quot % newspd > newspd / 2) {
622 quot /= newspd;
623 quot++;
624 } else
625 quot /= newspd;
626
627 mxser_set_must_enum_value(info->ioaddr, quot);
628 } else
629 #endif
630 mxser_set_must_enum_value(info->ioaddr, 0);
631
632 return 0;
633 }
634
635 /*
636 * This routine is called to set the UART divisor registers to match
637 * the specified baud rate for a serial port.
638 */
639 static int mxser_change_speed(struct tty_struct *tty,
640 struct ktermios *old_termios)
641 {
642 struct mxser_port *info = tty->driver_data;
643 unsigned cflag, cval, fcr;
644 int ret = 0;
645 unsigned char status;
646
647 cflag = tty->termios.c_cflag;
648 if (!info->ioaddr)
649 return ret;
650
651 if (mxser_set_baud_method[tty->index] == 0)
652 mxser_set_baud(tty, tty_get_baud_rate(tty));
653
654 /* byte size and parity */
655 switch (cflag & CSIZE) {
656 case CS5:
657 cval = 0x00;
658 break;
659 case CS6:
660 cval = 0x01;
661 break;
662 case CS7:
663 cval = 0x02;
664 break;
665 case CS8:
666 cval = 0x03;
667 break;
668 default:
669 cval = 0x00;
670 break; /* too keep GCC shut... */
671 }
672 if (cflag & CSTOPB)
673 cval |= 0x04;
674 if (cflag & PARENB)
675 cval |= UART_LCR_PARITY;
676 if (!(cflag & PARODD))
677 cval |= UART_LCR_EPAR;
678 if (cflag & CMSPAR)
679 cval |= UART_LCR_SPAR;
680
681 if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
682 if (info->board->chip_flag) {
683 fcr = UART_FCR_ENABLE_FIFO;
684 fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
685 mxser_set_must_fifo_value(info);
686 } else
687 fcr = 0;
688 } else {
689 fcr = UART_FCR_ENABLE_FIFO;
690 if (info->board->chip_flag) {
691 fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
692 mxser_set_must_fifo_value(info);
693 } else {
694 switch (info->rx_trigger) {
695 case 1:
696 fcr |= UART_FCR_TRIGGER_1;
697 break;
698 case 4:
699 fcr |= UART_FCR_TRIGGER_4;
700 break;
701 case 8:
702 fcr |= UART_FCR_TRIGGER_8;
703 break;
704 default:
705 fcr |= UART_FCR_TRIGGER_14;
706 break;
707 }
708 }
709 }
710
711 /* CTS flow control flag and modem status interrupts */
712 info->IER &= ~UART_IER_MSI;
713 info->MCR &= ~UART_MCR_AFE;
714 tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
715 if (cflag & CRTSCTS) {
716 info->IER |= UART_IER_MSI;
717 if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
718 info->MCR |= UART_MCR_AFE;
719 } else {
720 status = inb(info->ioaddr + UART_MSR);
721 if (tty->hw_stopped) {
722 if (status & UART_MSR_CTS) {
723 tty->hw_stopped = 0;
724 if (info->type != PORT_16550A &&
725 !info->board->chip_flag) {
726 outb(info->IER & ~UART_IER_THRI,
727 info->ioaddr +
728 UART_IER);
729 info->IER |= UART_IER_THRI;
730 outb(info->IER, info->ioaddr +
731 UART_IER);
732 }
733 tty_wakeup(tty);
734 }
735 } else {
736 if (!(status & UART_MSR_CTS)) {
737 tty->hw_stopped = 1;
738 if ((info->type != PORT_16550A) &&
739 (!info->board->chip_flag)) {
740 info->IER &= ~UART_IER_THRI;
741 outb(info->IER, info->ioaddr +
742 UART_IER);
743 }
744 }
745 }
746 }
747 }
748 outb(info->MCR, info->ioaddr + UART_MCR);
749 tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
750 if (~cflag & CLOCAL)
751 info->IER |= UART_IER_MSI;
752 outb(info->IER, info->ioaddr + UART_IER);
753
754 /*
755 * Set up parity check flag
756 */
757 info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
758 if (I_INPCK(tty))
759 info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
760 if (I_BRKINT(tty) || I_PARMRK(tty))
761 info->read_status_mask |= UART_LSR_BI;
762
763 info->ignore_status_mask = 0;
764
765 if (I_IGNBRK(tty)) {
766 info->ignore_status_mask |= UART_LSR_BI;
767 info->read_status_mask |= UART_LSR_BI;
768 /*
769 * If we're ignore parity and break indicators, ignore
770 * overruns too. (For real raw support).
771 */
772 if (I_IGNPAR(tty)) {
773 info->ignore_status_mask |=
774 UART_LSR_OE |
775 UART_LSR_PE |
776 UART_LSR_FE;
777 info->read_status_mask |=
778 UART_LSR_OE |
779 UART_LSR_PE |
780 UART_LSR_FE;
781 }
782 }
783 if (info->board->chip_flag) {
784 mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty));
785 mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty));
786 if (I_IXON(tty)) {
787 mxser_enable_must_rx_software_flow_control(
788 info->ioaddr);
789 } else {
790 mxser_disable_must_rx_software_flow_control(
791 info->ioaddr);
792 }
793 if (I_IXOFF(tty)) {
794 mxser_enable_must_tx_software_flow_control(
795 info->ioaddr);
796 } else {
797 mxser_disable_must_tx_software_flow_control(
798 info->ioaddr);
799 }
800 }
801
802
803 outb(fcr, info->ioaddr + UART_FCR); /* set fcr */
804 outb(cval, info->ioaddr + UART_LCR);
805
806 return ret;
807 }
808
809 static void mxser_check_modem_status(struct tty_struct *tty,
810 struct mxser_port *port, int status)
811 {
812 /* update input line counters */
813 if (status & UART_MSR_TERI)
814 port->icount.rng++;
815 if (status & UART_MSR_DDSR)
816 port->icount.dsr++;
817 if (status & UART_MSR_DDCD)
818 port->icount.dcd++;
819 if (status & UART_MSR_DCTS)
820 port->icount.cts++;
821 port->mon_data.modem_status = status;
822 wake_up_interruptible(&port->port.delta_msr_wait);
823
824 if (tty_port_check_carrier(&port->port) && (status & UART_MSR_DDCD)) {
825 if (status & UART_MSR_DCD)
826 wake_up_interruptible(&port->port.open_wait);
827 }
828
829 if (tty_port_cts_enabled(&port->port)) {
830 if (tty->hw_stopped) {
831 if (status & UART_MSR_CTS) {
832 tty->hw_stopped = 0;
833
834 if ((port->type != PORT_16550A) &&
835 (!port->board->chip_flag)) {
836 outb(port->IER & ~UART_IER_THRI,
837 port->ioaddr + UART_IER);
838 port->IER |= UART_IER_THRI;
839 outb(port->IER, port->ioaddr +
840 UART_IER);
841 }
842 tty_wakeup(tty);
843 }
844 } else {
845 if (!(status & UART_MSR_CTS)) {
846 tty->hw_stopped = 1;
847 if (port->type != PORT_16550A &&
848 !port->board->chip_flag) {
849 port->IER &= ~UART_IER_THRI;
850 outb(port->IER, port->ioaddr +
851 UART_IER);
852 }
853 }
854 }
855 }
856 }
857
858 static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
859 {
860 struct mxser_port *info = container_of(port, struct mxser_port, port);
861 unsigned long page;
862 unsigned long flags;
863
864 page = __get_free_page(GFP_KERNEL);
865 if (!page)
866 return -ENOMEM;
867
868 spin_lock_irqsave(&info->slock, flags);
869
870 if (!info->ioaddr || !info->type) {
871 set_bit(TTY_IO_ERROR, &tty->flags);
872 free_page(page);
873 spin_unlock_irqrestore(&info->slock, flags);
874 return 0;
875 }
876 info->port.xmit_buf = (unsigned char *) page;
877
878 /*
879 * Clear the FIFO buffers and disable them
880 * (they will be reenabled in mxser_change_speed())
881 */
882 if (info->board->chip_flag)
883 outb((UART_FCR_CLEAR_RCVR |
884 UART_FCR_CLEAR_XMIT |
885 MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
886 else
887 outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
888 info->ioaddr + UART_FCR);
889
890 /*
891 * At this point there's no way the LSR could still be 0xFF;
892 * if it is, then bail out, because there's likely no UART
893 * here.
894 */
895 if (inb(info->ioaddr + UART_LSR) == 0xff) {
896 spin_unlock_irqrestore(&info->slock, flags);
897 if (capable(CAP_SYS_ADMIN)) {
898 set_bit(TTY_IO_ERROR, &tty->flags);
899 return 0;
900 } else
901 return -ENODEV;
902 }
903
904 /*
905 * Clear the interrupt registers.
906 */
907 (void) inb(info->ioaddr + UART_LSR);
908 (void) inb(info->ioaddr + UART_RX);
909 (void) inb(info->ioaddr + UART_IIR);
910 (void) inb(info->ioaddr + UART_MSR);
911
912 /*
913 * Now, initialize the UART
914 */
915 outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */
916 info->MCR = UART_MCR_DTR | UART_MCR_RTS;
917 outb(info->MCR, info->ioaddr + UART_MCR);
918
919 /*
920 * Finally, enable interrupts
921 */
922 info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
923
924 if (info->board->chip_flag)
925 info->IER |= MOXA_MUST_IER_EGDAI;
926 outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */
927
928 /*
929 * And clear the interrupt registers again for luck.
930 */
931 (void) inb(info->ioaddr + UART_LSR);
932 (void) inb(info->ioaddr + UART_RX);
933 (void) inb(info->ioaddr + UART_IIR);
934 (void) inb(info->ioaddr + UART_MSR);
935
936 clear_bit(TTY_IO_ERROR, &tty->flags);
937 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
938
939 /*
940 * and set the speed of the serial port
941 */
942 mxser_change_speed(tty, NULL);
943 spin_unlock_irqrestore(&info->slock, flags);
944
945 return 0;
946 }
947
948 /*
949 * This routine will shutdown a serial port
950 */
951 static void mxser_shutdown_port(struct tty_port *port)
952 {
953 struct mxser_port *info = container_of(port, struct mxser_port, port);
954 unsigned long flags;
955
956 spin_lock_irqsave(&info->slock, flags);
957
958 /*
959 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
960 * here so the queue might never be waken up
961 */
962 wake_up_interruptible(&info->port.delta_msr_wait);
963
964 /*
965 * Free the xmit buffer, if necessary
966 */
967 if (info->port.xmit_buf) {
968 free_page((unsigned long) info->port.xmit_buf);
969 info->port.xmit_buf = NULL;
970 }
971
972 info->IER = 0;
973 outb(0x00, info->ioaddr + UART_IER);
974
975 /* clear Rx/Tx FIFO's */
976 if (info->board->chip_flag)
977 outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
978 MOXA_MUST_FCR_GDA_MODE_ENABLE,
979 info->ioaddr + UART_FCR);
980 else
981 outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
982 info->ioaddr + UART_FCR);
983
984 /* read data port to reset things */
985 (void) inb(info->ioaddr + UART_RX);
986
987
988 if (info->board->chip_flag)
989 SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
990
991 spin_unlock_irqrestore(&info->slock, flags);
992 }
993
994 /*
995 * This routine is called whenever a serial port is opened. It
996 * enables interrupts for a serial port, linking in its async structure into
997 * the IRQ chain. It also performs the serial-specific
998 * initialization for the tty structure.
999 */
1000 static int mxser_open(struct tty_struct *tty, struct file *filp)
1001 {
1002 struct mxser_port *info;
1003 int line;
1004
1005 line = tty->index;
1006 if (line == MXSER_PORTS)
1007 return 0;
1008 info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD];
1009 if (!info->ioaddr)
1010 return -ENODEV;
1011
1012 tty->driver_data = info;
1013 return tty_port_open(&info->port, tty, filp);
1014 }
1015
1016 static void mxser_flush_buffer(struct tty_struct *tty)
1017 {
1018 struct mxser_port *info = tty->driver_data;
1019 char fcr;
1020 unsigned long flags;
1021
1022
1023 spin_lock_irqsave(&info->slock, flags);
1024 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1025
1026 fcr = inb(info->ioaddr + UART_FCR);
1027 outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
1028 info->ioaddr + UART_FCR);
1029 outb(fcr, info->ioaddr + UART_FCR);
1030
1031 spin_unlock_irqrestore(&info->slock, flags);
1032
1033 tty_wakeup(tty);
1034 }
1035
1036
1037 static void mxser_close_port(struct tty_port *port)
1038 {
1039 struct mxser_port *info = container_of(port, struct mxser_port, port);
1040 unsigned long timeout;
1041 /*
1042 * At this point we stop accepting input. To do this, we
1043 * disable the receive line status interrupts, and tell the
1044 * interrupt driver to stop checking the data ready bit in the
1045 * line status register.
1046 */
1047 info->IER &= ~UART_IER_RLSI;
1048 if (info->board->chip_flag)
1049 info->IER &= ~MOXA_MUST_RECV_ISR;
1050
1051 outb(info->IER, info->ioaddr + UART_IER);
1052 /*
1053 * Before we drop DTR, make sure the UART transmitter
1054 * has completely drained; this is especially
1055 * important if there is a transmit FIFO!
1056 */
1057 timeout = jiffies + HZ;
1058 while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
1059 schedule_timeout_interruptible(5);
1060 if (time_after(jiffies, timeout))
1061 break;
1062 }
1063 }
1064
1065 /*
1066 * This routine is called when the serial port gets closed. First, we
1067 * wait for the last remaining data to be sent. Then, we unlink its
1068 * async structure from the interrupt chain if necessary, and we free
1069 * that IRQ if nothing is left in the chain.
1070 */
1071 static void mxser_close(struct tty_struct *tty, struct file *filp)
1072 {
1073 struct mxser_port *info = tty->driver_data;
1074 struct tty_port *port = &info->port;
1075
1076 if (tty->index == MXSER_PORTS || info == NULL)
1077 return;
1078 if (tty_port_close_start(port, tty, filp) == 0)
1079 return;
1080 info->closing = 1;
1081 mutex_lock(&port->mutex);
1082 mxser_close_port(port);
1083 mxser_flush_buffer(tty);
1084 if (tty_port_initialized(port) && C_HUPCL(tty))
1085 tty_port_lower_dtr_rts(port);
1086 mxser_shutdown_port(port);
1087 tty_port_set_initialized(port, 0);
1088 mutex_unlock(&port->mutex);
1089 info->closing = 0;
1090 /* Right now the tty_port set is done outside of the close_end helper
1091 as we don't yet have everyone using refcounts */
1092 tty_port_close_end(port, tty);
1093 tty_port_tty_set(port, NULL);
1094 }
1095
1096 static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
1097 {
1098 int c, total = 0;
1099 struct mxser_port *info = tty->driver_data;
1100 unsigned long flags;
1101
1102 if (!info->port.xmit_buf)
1103 return 0;
1104
1105 while (1) {
1106 c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
1107 SERIAL_XMIT_SIZE - info->xmit_head));
1108 if (c <= 0)
1109 break;
1110
1111 memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
1112 spin_lock_irqsave(&info->slock, flags);
1113 info->xmit_head = (info->xmit_head + c) &
1114 (SERIAL_XMIT_SIZE - 1);
1115 info->xmit_cnt += c;
1116 spin_unlock_irqrestore(&info->slock, flags);
1117
1118 buf += c;
1119 count -= c;
1120 total += c;
1121 }
1122
1123 if (info->xmit_cnt && !tty->stopped) {
1124 if (!tty->hw_stopped ||
1125 (info->type == PORT_16550A) ||
1126 (info->board->chip_flag)) {
1127 spin_lock_irqsave(&info->slock, flags);
1128 outb(info->IER & ~UART_IER_THRI, info->ioaddr +
1129 UART_IER);
1130 info->IER |= UART_IER_THRI;
1131 outb(info->IER, info->ioaddr + UART_IER);
1132 spin_unlock_irqrestore(&info->slock, flags);
1133 }
1134 }
1135 return total;
1136 }
1137
1138 static int mxser_put_char(struct tty_struct *tty, unsigned char ch)
1139 {
1140 struct mxser_port *info = tty->driver_data;
1141 unsigned long flags;
1142
1143 if (!info->port.xmit_buf)
1144 return 0;
1145
1146 if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
1147 return 0;
1148
1149 spin_lock_irqsave(&info->slock, flags);
1150 info->port.xmit_buf[info->xmit_head++] = ch;
1151 info->xmit_head &= SERIAL_XMIT_SIZE - 1;
1152 info->xmit_cnt++;
1153 spin_unlock_irqrestore(&info->slock, flags);
1154 if (!tty->stopped) {
1155 if (!tty->hw_stopped ||
1156 (info->type == PORT_16550A) ||
1157 info->board->chip_flag) {
1158 spin_lock_irqsave(&info->slock, flags);
1159 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
1160 info->IER |= UART_IER_THRI;
1161 outb(info->IER, info->ioaddr + UART_IER);
1162 spin_unlock_irqrestore(&info->slock, flags);
1163 }
1164 }
1165 return 1;
1166 }
1167
1168
1169 static void mxser_flush_chars(struct tty_struct *tty)
1170 {
1171 struct mxser_port *info = tty->driver_data;
1172 unsigned long flags;
1173
1174 if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf ||
1175 (tty->hw_stopped && info->type != PORT_16550A &&
1176 !info->board->chip_flag))
1177 return;
1178
1179 spin_lock_irqsave(&info->slock, flags);
1180
1181 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
1182 info->IER |= UART_IER_THRI;
1183 outb(info->IER, info->ioaddr + UART_IER);
1184
1185 spin_unlock_irqrestore(&info->slock, flags);
1186 }
1187
1188 static int mxser_write_room(struct tty_struct *tty)
1189 {
1190 struct mxser_port *info = tty->driver_data;
1191 int ret;
1192
1193 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
1194 return ret < 0 ? 0 : ret;
1195 }
1196
1197 static int mxser_chars_in_buffer(struct tty_struct *tty)
1198 {
1199 struct mxser_port *info = tty->driver_data;
1200 return info->xmit_cnt;
1201 }
1202
1203 /*
1204 * ------------------------------------------------------------
1205 * friends of mxser_ioctl()
1206 * ------------------------------------------------------------
1207 */
1208 static int mxser_get_serial_info(struct tty_struct *tty,
1209 struct serial_struct __user *retinfo)
1210 {
1211 struct mxser_port *info = tty->driver_data;
1212 struct serial_struct tmp = {
1213 .type = info->type,
1214 .line = tty->index,
1215 .port = info->ioaddr,
1216 .irq = info->board->irq,
1217 .flags = info->port.flags,
1218 .baud_base = info->baud_base,
1219 .close_delay = info->port.close_delay,
1220 .closing_wait = info->port.closing_wait,
1221 .custom_divisor = info->custom_divisor,
1222 };
1223 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1224 return -EFAULT;
1225 return 0;
1226 }
1227
1228 static int mxser_set_serial_info(struct tty_struct *tty,
1229 struct serial_struct __user *new_info)
1230 {
1231 struct mxser_port *info = tty->driver_data;
1232 struct tty_port *port = &info->port;
1233 struct serial_struct new_serial;
1234 speed_t baud;
1235 unsigned long sl_flags;
1236 unsigned int flags;
1237 int retval = 0;
1238
1239 if (!new_info || !info->ioaddr)
1240 return -ENODEV;
1241 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
1242 return -EFAULT;
1243
1244 if (new_serial.irq != info->board->irq ||
1245 new_serial.port != info->ioaddr)
1246 return -EINVAL;
1247
1248 flags = port->flags & ASYNC_SPD_MASK;
1249
1250 if (!capable(CAP_SYS_ADMIN)) {
1251 if ((new_serial.baud_base != info->baud_base) ||
1252 (new_serial.close_delay != info->port.close_delay) ||
1253 ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
1254 return -EPERM;
1255 info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
1256 (new_serial.flags & ASYNC_USR_MASK));
1257 } else {
1258 /*
1259 * OK, past this point, all the error checking has been done.
1260 * At this point, we start making changes.....
1261 */
1262 port->flags = ((port->flags & ~ASYNC_FLAGS) |
1263 (new_serial.flags & ASYNC_FLAGS));
1264 port->close_delay = new_serial.close_delay * HZ / 100;
1265 port->closing_wait = new_serial.closing_wait * HZ / 100;
1266 port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
1267 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
1268 (new_serial.baud_base != info->baud_base ||
1269 new_serial.custom_divisor !=
1270 info->custom_divisor)) {
1271 if (new_serial.custom_divisor == 0)
1272 return -EINVAL;
1273 baud = new_serial.baud_base / new_serial.custom_divisor;
1274 tty_encode_baud_rate(tty, baud, baud);
1275 }
1276 }
1277
1278 info->type = new_serial.type;
1279
1280 process_txrx_fifo(info);
1281
1282 if (tty_port_initialized(port)) {
1283 if (flags != (port->flags & ASYNC_SPD_MASK)) {
1284 spin_lock_irqsave(&info->slock, sl_flags);
1285 mxser_change_speed(tty, NULL);
1286 spin_unlock_irqrestore(&info->slock, sl_flags);
1287 }
1288 } else {
1289 retval = mxser_activate(port, tty);
1290 if (retval == 0)
1291 tty_port_set_initialized(port, 1);
1292 }
1293 return retval;
1294 }
1295
1296 /*
1297 * mxser_get_lsr_info - get line status register info
1298 *
1299 * Purpose: Let user call ioctl() to get info when the UART physically
1300 * is emptied. On bus types like RS485, the transmitter must
1301 * release the bus after transmitting. This must be done when
1302 * the transmit shift register is empty, not be done when the
1303 * transmit holding register is empty. This functionality
1304 * allows an RS485 driver to be written in user space.
1305 */
1306 static int mxser_get_lsr_info(struct mxser_port *info,
1307 unsigned int __user *value)
1308 {
1309 unsigned char status;
1310 unsigned int result;
1311 unsigned long flags;
1312
1313 spin_lock_irqsave(&info->slock, flags);
1314 status = inb(info->ioaddr + UART_LSR);
1315 spin_unlock_irqrestore(&info->slock, flags);
1316 result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
1317 return put_user(result, value);
1318 }
1319
1320 static int mxser_tiocmget(struct tty_struct *tty)
1321 {
1322 struct mxser_port *info = tty->driver_data;
1323 unsigned char control, status;
1324 unsigned long flags;
1325
1326
1327 if (tty->index == MXSER_PORTS)
1328 return -ENOIOCTLCMD;
1329 if (tty_io_error(tty))
1330 return -EIO;
1331
1332 control = info->MCR;
1333
1334 spin_lock_irqsave(&info->slock, flags);
1335 status = inb(info->ioaddr + UART_MSR);
1336 if (status & UART_MSR_ANY_DELTA)
1337 mxser_check_modem_status(tty, info, status);
1338 spin_unlock_irqrestore(&info->slock, flags);
1339 return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
1340 ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
1341 ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
1342 ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
1343 ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
1344 ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
1345 }
1346
1347 static int mxser_tiocmset(struct tty_struct *tty,
1348 unsigned int set, unsigned int clear)
1349 {
1350 struct mxser_port *info = tty->driver_data;
1351 unsigned long flags;
1352
1353
1354 if (tty->index == MXSER_PORTS)
1355 return -ENOIOCTLCMD;
1356 if (tty_io_error(tty))
1357 return -EIO;
1358
1359 spin_lock_irqsave(&info->slock, flags);
1360
1361 if (set & TIOCM_RTS)
1362 info->MCR |= UART_MCR_RTS;
1363 if (set & TIOCM_DTR)
1364 info->MCR |= UART_MCR_DTR;
1365
1366 if (clear & TIOCM_RTS)
1367 info->MCR &= ~UART_MCR_RTS;
1368 if (clear & TIOCM_DTR)
1369 info->MCR &= ~UART_MCR_DTR;
1370
1371 outb(info->MCR, info->ioaddr + UART_MCR);
1372 spin_unlock_irqrestore(&info->slock, flags);
1373 return 0;
1374 }
1375
1376 static int __init mxser_program_mode(int port)
1377 {
1378 int id, i, j, n;
1379
1380 outb(0, port);
1381 outb(0, port);
1382 outb(0, port);
1383 (void)inb(port);
1384 (void)inb(port);
1385 outb(0, port);
1386 (void)inb(port);
1387
1388 id = inb(port + 1) & 0x1F;
1389 if ((id != C168_ASIC_ID) &&
1390 (id != C104_ASIC_ID) &&
1391 (id != C102_ASIC_ID) &&
1392 (id != CI132_ASIC_ID) &&
1393 (id != CI134_ASIC_ID) &&
1394 (id != CI104J_ASIC_ID))
1395 return -1;
1396 for (i = 0, j = 0; i < 4; i++) {
1397 n = inb(port + 2);
1398 if (n == 'M') {
1399 j = 1;
1400 } else if ((j == 1) && (n == 1)) {
1401 j = 2;
1402 break;
1403 } else
1404 j = 0;
1405 }
1406 if (j != 2)
1407 id = -2;
1408 return id;
1409 }
1410
1411 static void __init mxser_normal_mode(int port)
1412 {
1413 int i, n;
1414
1415 outb(0xA5, port + 1);
1416 outb(0x80, port + 3);
1417 outb(12, port + 0); /* 9600 bps */
1418 outb(0, port + 1);
1419 outb(0x03, port + 3); /* 8 data bits */
1420 outb(0x13, port + 4); /* loop back mode */
1421 for (i = 0; i < 16; i++) {
1422 n = inb(port + 5);
1423 if ((n & 0x61) == 0x60)
1424 break;
1425 if ((n & 1) == 1)
1426 (void)inb(port);
1427 }
1428 outb(0x00, port + 4);
1429 }
1430
1431 #define CHIP_SK 0x01 /* Serial Data Clock in Eprom */
1432 #define CHIP_DO 0x02 /* Serial Data Output in Eprom */
1433 #define CHIP_CS 0x04 /* Serial Chip Select in Eprom */
1434 #define CHIP_DI 0x08 /* Serial Data Input in Eprom */
1435 #define EN_CCMD 0x000 /* Chip's command register */
1436 #define EN0_RSARLO 0x008 /* Remote start address reg 0 */
1437 #define EN0_RSARHI 0x009 /* Remote start address reg 1 */
1438 #define EN0_RCNTLO 0x00A /* Remote byte count reg WR */
1439 #define EN0_RCNTHI 0x00B /* Remote byte count reg WR */
1440 #define EN0_DCFG 0x00E /* Data configuration reg WR */
1441 #define EN0_PORT 0x010 /* Rcv missed frame error counter RD */
1442 #define ENC_PAGE0 0x000 /* Select page 0 of chip registers */
1443 #define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */
1444 static int __init mxser_read_register(int port, unsigned short *regs)
1445 {
1446 int i, k, value, id;
1447 unsigned int j;
1448
1449 id = mxser_program_mode(port);
1450 if (id < 0)
1451 return id;
1452 for (i = 0; i < 14; i++) {
1453 k = (i & 0x3F) | 0x180;
1454 for (j = 0x100; j > 0; j >>= 1) {
1455 outb(CHIP_CS, port);
1456 if (k & j) {
1457 outb(CHIP_CS | CHIP_DO, port);
1458 outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */
1459 } else {
1460 outb(CHIP_CS, port);
1461 outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */
1462 }
1463 }
1464 (void)inb(port);
1465 value = 0;
1466 for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
1467 outb(CHIP_CS, port);
1468 outb(CHIP_CS | CHIP_SK, port);
1469 if (inb(port) & CHIP_DI)
1470 value |= j;
1471 }
1472 regs[i] = value;
1473 outb(0, port);
1474 }
1475 mxser_normal_mode(port);
1476 return id;
1477 }
1478
1479 static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
1480 {
1481 struct mxser_port *ip;
1482 struct tty_port *port;
1483 struct tty_struct *tty;
1484 int result, status;
1485 unsigned int i, j;
1486 int ret = 0;
1487
1488 switch (cmd) {
1489 case MOXA_GET_MAJOR:
1490 printk_ratelimited(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
1491 "%x (GET_MAJOR), fix your userspace\n",
1492 current->comm, cmd);
1493 return put_user(ttymajor, (int __user *)argp);
1494
1495 case MOXA_CHKPORTENABLE:
1496 result = 0;
1497 for (i = 0; i < MXSER_BOARDS; i++)
1498 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
1499 if (mxser_boards[i].ports[j].ioaddr)
1500 result |= (1 << i);
1501 return put_user(result, (unsigned long __user *)argp);
1502 case MOXA_GETDATACOUNT:
1503 /* The receive side is locked by port->slock but it isn't
1504 clear that an exact snapshot is worth copying here */
1505 if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
1506 ret = -EFAULT;
1507 return ret;
1508 case MOXA_GETMSTATUS: {
1509 struct mxser_mstatus ms, __user *msu = argp;
1510 for (i = 0; i < MXSER_BOARDS; i++)
1511 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
1512 ip = &mxser_boards[i].ports[j];
1513 port = &ip->port;
1514 memset(&ms, 0, sizeof(ms));
1515
1516 mutex_lock(&port->mutex);
1517 if (!ip->ioaddr)
1518 goto copy;
1519
1520 tty = tty_port_tty_get(port);
1521
1522 if (!tty)
1523 ms.cflag = ip->normal_termios.c_cflag;
1524 else
1525 ms.cflag = tty->termios.c_cflag;
1526 tty_kref_put(tty);
1527 spin_lock_irq(&ip->slock);
1528 status = inb(ip->ioaddr + UART_MSR);
1529 spin_unlock_irq(&ip->slock);
1530 if (status & UART_MSR_DCD)
1531 ms.dcd = 1;
1532 if (status & UART_MSR_DSR)
1533 ms.dsr = 1;
1534 if (status & UART_MSR_CTS)
1535 ms.cts = 1;
1536 copy:
1537 mutex_unlock(&port->mutex);
1538 if (copy_to_user(msu, &ms, sizeof(ms)))
1539 return -EFAULT;
1540 msu++;
1541 }
1542 return 0;
1543 }
1544 case MOXA_ASPP_MON_EXT: {
1545 struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */
1546 unsigned int cflag, iflag, p;
1547 u8 opmode;
1548
1549 me = kzalloc(sizeof(*me), GFP_KERNEL);
1550 if (!me)
1551 return -ENOMEM;
1552
1553 for (i = 0, p = 0; i < MXSER_BOARDS; i++) {
1554 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) {
1555 if (p >= ARRAY_SIZE(me->rx_cnt)) {
1556 i = MXSER_BOARDS;
1557 break;
1558 }
1559 ip = &mxser_boards[i].ports[j];
1560 port = &ip->port;
1561
1562 mutex_lock(&port->mutex);
1563 if (!ip->ioaddr) {
1564 mutex_unlock(&port->mutex);
1565 continue;
1566 }
1567
1568 spin_lock_irq(&ip->slock);
1569 status = mxser_get_msr(ip->ioaddr, 0, p);
1570
1571 if (status & UART_MSR_TERI)
1572 ip->icount.rng++;
1573 if (status & UART_MSR_DDSR)
1574 ip->icount.dsr++;
1575 if (status & UART_MSR_DDCD)
1576 ip->icount.dcd++;
1577 if (status & UART_MSR_DCTS)
1578 ip->icount.cts++;
1579
1580 ip->mon_data.modem_status = status;
1581 me->rx_cnt[p] = ip->mon_data.rxcnt;
1582 me->tx_cnt[p] = ip->mon_data.txcnt;
1583 me->up_rxcnt[p] = ip->mon_data.up_rxcnt;
1584 me->up_txcnt[p] = ip->mon_data.up_txcnt;
1585 me->modem_status[p] =
1586 ip->mon_data.modem_status;
1587 spin_unlock_irq(&ip->slock);
1588
1589 tty = tty_port_tty_get(&ip->port);
1590
1591 if (!tty) {
1592 cflag = ip->normal_termios.c_cflag;
1593 iflag = ip->normal_termios.c_iflag;
1594 me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios);
1595 } else {
1596 cflag = tty->termios.c_cflag;
1597 iflag = tty->termios.c_iflag;
1598 me->baudrate[p] = tty_get_baud_rate(tty);
1599 }
1600 tty_kref_put(tty);
1601
1602 me->databits[p] = cflag & CSIZE;
1603 me->stopbits[p] = cflag & CSTOPB;
1604 me->parity[p] = cflag & (PARENB | PARODD |
1605 CMSPAR);
1606
1607 if (cflag & CRTSCTS)
1608 me->flowctrl[p] |= 0x03;
1609
1610 if (iflag & (IXON | IXOFF))
1611 me->flowctrl[p] |= 0x0C;
1612
1613 if (ip->type == PORT_16550A)
1614 me->fifo[p] = 1;
1615
1616 if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) {
1617 opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
1618 opmode &= OP_MODE_MASK;
1619 } else {
1620 opmode = RS232_MODE;
1621 }
1622 me->iftype[p] = opmode;
1623 mutex_unlock(&port->mutex);
1624 }
1625 }
1626 if (copy_to_user(argp, me, sizeof(*me)))
1627 ret = -EFAULT;
1628 kfree(me);
1629 return ret;
1630 }
1631 default:
1632 return -ENOIOCTLCMD;
1633 }
1634 return 0;
1635 }
1636
1637 static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg,
1638 struct async_icount *cprev)
1639 {
1640 struct async_icount cnow;
1641 unsigned long flags;
1642 int ret;
1643
1644 spin_lock_irqsave(&info->slock, flags);
1645 cnow = info->icount; /* atomic copy */
1646 spin_unlock_irqrestore(&info->slock, flags);
1647
1648 ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
1649 ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
1650 ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
1651 ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
1652
1653 *cprev = cnow;
1654
1655 return ret;
1656 }
1657
1658 static int mxser_ioctl(struct tty_struct *tty,
1659 unsigned int cmd, unsigned long arg)
1660 {
1661 struct mxser_port *info = tty->driver_data;
1662 struct tty_port *port = &info->port;
1663 struct async_icount cnow;
1664 unsigned long flags;
1665 void __user *argp = (void __user *)arg;
1666 int retval;
1667
1668 if (tty->index == MXSER_PORTS)
1669 return mxser_ioctl_special(cmd, argp);
1670
1671 if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
1672 int p;
1673 unsigned long opmode;
1674 static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
1675 int shiftbit;
1676 unsigned char val, mask;
1677
1678 if (info->board->chip_flag != MOXA_MUST_MU860_HWID)
1679 return -EFAULT;
1680
1681 p = tty->index % 4;
1682 if (cmd == MOXA_SET_OP_MODE) {
1683 if (get_user(opmode, (int __user *) argp))
1684 return -EFAULT;
1685 if (opmode != RS232_MODE &&
1686 opmode != RS485_2WIRE_MODE &&
1687 opmode != RS422_MODE &&
1688 opmode != RS485_4WIRE_MODE)
1689 return -EFAULT;
1690 mask = ModeMask[p];
1691 shiftbit = p * 2;
1692 spin_lock_irq(&info->slock);
1693 val = inb(info->opmode_ioaddr);
1694 val &= mask;
1695 val |= (opmode << shiftbit);
1696 outb(val, info->opmode_ioaddr);
1697 spin_unlock_irq(&info->slock);
1698 } else {
1699 shiftbit = p * 2;
1700 spin_lock_irq(&info->slock);
1701 opmode = inb(info->opmode_ioaddr) >> shiftbit;
1702 spin_unlock_irq(&info->slock);
1703 opmode &= OP_MODE_MASK;
1704 if (put_user(opmode, (int __user *)argp))
1705 return -EFAULT;
1706 }
1707 return 0;
1708 }
1709
1710 if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && tty_io_error(tty))
1711 return -EIO;
1712
1713 switch (cmd) {
1714 case TIOCGSERIAL:
1715 mutex_lock(&port->mutex);
1716 retval = mxser_get_serial_info(tty, argp);
1717 mutex_unlock(&port->mutex);
1718 return retval;
1719 case TIOCSSERIAL:
1720 mutex_lock(&port->mutex);
1721 retval = mxser_set_serial_info(tty, argp);
1722 mutex_unlock(&port->mutex);
1723 return retval;
1724 case TIOCSERGETLSR: /* Get line status register */
1725 return mxser_get_lsr_info(info, argp);
1726 /*
1727 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1728 * - mask passed in arg for lines of interest
1729 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1730 * Caller should use TIOCGICOUNT to see which one it was
1731 */
1732 case TIOCMIWAIT:
1733 spin_lock_irqsave(&info->slock, flags);
1734 cnow = info->icount; /* note the counters on entry */
1735 spin_unlock_irqrestore(&info->slock, flags);
1736
1737 return wait_event_interruptible(info->port.delta_msr_wait,
1738 mxser_cflags_changed(info, arg, &cnow));
1739 case MOXA_HighSpeedOn:
1740 return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
1741 case MOXA_SDS_RSTICOUNTER:
1742 spin_lock_irq(&info->slock);
1743 info->mon_data.rxcnt = 0;
1744 info->mon_data.txcnt = 0;
1745 spin_unlock_irq(&info->slock);
1746 return 0;
1747
1748 case MOXA_ASPP_OQUEUE:{
1749 int len, lsr;
1750
1751 len = mxser_chars_in_buffer(tty);
1752 spin_lock_irq(&info->slock);
1753 lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE;
1754 spin_unlock_irq(&info->slock);
1755 len += (lsr ? 0 : 1);
1756
1757 return put_user(len, (int __user *)argp);
1758 }
1759 case MOXA_ASPP_MON: {
1760 int mcr, status;
1761
1762 spin_lock_irq(&info->slock);
1763 status = mxser_get_msr(info->ioaddr, 1, tty->index);
1764 mxser_check_modem_status(tty, info, status);
1765
1766 mcr = inb(info->ioaddr + UART_MCR);
1767 spin_unlock_irq(&info->slock);
1768
1769 if (mcr & MOXA_MUST_MCR_XON_FLAG)
1770 info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
1771 else
1772 info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
1773
1774 if (mcr & MOXA_MUST_MCR_TX_XON)
1775 info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
1776 else
1777 info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
1778
1779 if (tty->hw_stopped)
1780 info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
1781 else
1782 info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
1783
1784 if (copy_to_user(argp, &info->mon_data,
1785 sizeof(struct mxser_mon)))
1786 return -EFAULT;
1787
1788 return 0;
1789 }
1790 case MOXA_ASPP_LSTATUS: {
1791 if (put_user(info->err_shadow, (unsigned char __user *)argp))
1792 return -EFAULT;
1793
1794 info->err_shadow = 0;
1795 return 0;
1796 }
1797 case MOXA_SET_BAUD_METHOD: {
1798 int method;
1799
1800 if (get_user(method, (int __user *)argp))
1801 return -EFAULT;
1802 mxser_set_baud_method[tty->index] = method;
1803 return put_user(method, (int __user *)argp);
1804 }
1805 default:
1806 return -ENOIOCTLCMD;
1807 }
1808 return 0;
1809 }
1810
1811 /*
1812 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1813 * Return: write counters to the user passed counter struct
1814 * NB: both 1->0 and 0->1 transitions are counted except for
1815 * RI where only 0->1 is counted.
1816 */
1817
1818 static int mxser_get_icount(struct tty_struct *tty,
1819 struct serial_icounter_struct *icount)
1820
1821 {
1822 struct mxser_port *info = tty->driver_data;
1823 struct async_icount cnow;
1824 unsigned long flags;
1825
1826 spin_lock_irqsave(&info->slock, flags);
1827 cnow = info->icount;
1828 spin_unlock_irqrestore(&info->slock, flags);
1829
1830 icount->frame = cnow.frame;
1831 icount->brk = cnow.brk;
1832 icount->overrun = cnow.overrun;
1833 icount->buf_overrun = cnow.buf_overrun;
1834 icount->parity = cnow.parity;
1835 icount->rx = cnow.rx;
1836 icount->tx = cnow.tx;
1837 icount->cts = cnow.cts;
1838 icount->dsr = cnow.dsr;
1839 icount->rng = cnow.rng;
1840 icount->dcd = cnow.dcd;
1841 return 0;
1842 }
1843
1844 static void mxser_stoprx(struct tty_struct *tty)
1845 {
1846 struct mxser_port *info = tty->driver_data;
1847
1848 info->ldisc_stop_rx = 1;
1849 if (I_IXOFF(tty)) {
1850 if (info->board->chip_flag) {
1851 info->IER &= ~MOXA_MUST_RECV_ISR;
1852 outb(info->IER, info->ioaddr + UART_IER);
1853 } else {
1854 info->x_char = STOP_CHAR(tty);
1855 outb(0, info->ioaddr + UART_IER);
1856 info->IER |= UART_IER_THRI;
1857 outb(info->IER, info->ioaddr + UART_IER);
1858 }
1859 }
1860
1861 if (C_CRTSCTS(tty)) {
1862 info->MCR &= ~UART_MCR_RTS;
1863 outb(info->MCR, info->ioaddr + UART_MCR);
1864 }
1865 }
1866
1867 /*
1868 * This routine is called by the upper-layer tty layer to signal that
1869 * incoming characters should be throttled.
1870 */
1871 static void mxser_throttle(struct tty_struct *tty)
1872 {
1873 mxser_stoprx(tty);
1874 }
1875
1876 static void mxser_unthrottle(struct tty_struct *tty)
1877 {
1878 struct mxser_port *info = tty->driver_data;
1879
1880 /* startrx */
1881 info->ldisc_stop_rx = 0;
1882 if (I_IXOFF(tty)) {
1883 if (info->x_char)
1884 info->x_char = 0;
1885 else {
1886 if (info->board->chip_flag) {
1887 info->IER |= MOXA_MUST_RECV_ISR;
1888 outb(info->IER, info->ioaddr + UART_IER);
1889 } else {
1890 info->x_char = START_CHAR(tty);
1891 outb(0, info->ioaddr + UART_IER);
1892 info->IER |= UART_IER_THRI;
1893 outb(info->IER, info->ioaddr + UART_IER);
1894 }
1895 }
1896 }
1897
1898 if (C_CRTSCTS(tty)) {
1899 info->MCR |= UART_MCR_RTS;
1900 outb(info->MCR, info->ioaddr + UART_MCR);
1901 }
1902 }
1903
1904 /*
1905 * mxser_stop() and mxser_start()
1906 *
1907 * This routines are called before setting or resetting tty->stopped.
1908 * They enable or disable transmitter interrupts, as necessary.
1909 */
1910 static void mxser_stop(struct tty_struct *tty)
1911 {
1912 struct mxser_port *info = tty->driver_data;
1913 unsigned long flags;
1914
1915 spin_lock_irqsave(&info->slock, flags);
1916 if (info->IER & UART_IER_THRI) {
1917 info->IER &= ~UART_IER_THRI;
1918 outb(info->IER, info->ioaddr + UART_IER);
1919 }
1920 spin_unlock_irqrestore(&info->slock, flags);
1921 }
1922
1923 static void mxser_start(struct tty_struct *tty)
1924 {
1925 struct mxser_port *info = tty->driver_data;
1926 unsigned long flags;
1927
1928 spin_lock_irqsave(&info->slock, flags);
1929 if (info->xmit_cnt && info->port.xmit_buf) {
1930 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
1931 info->IER |= UART_IER_THRI;
1932 outb(info->IER, info->ioaddr + UART_IER);
1933 }
1934 spin_unlock_irqrestore(&info->slock, flags);
1935 }
1936
1937 static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
1938 {
1939 struct mxser_port *info = tty->driver_data;
1940 unsigned long flags;
1941
1942 spin_lock_irqsave(&info->slock, flags);
1943 mxser_change_speed(tty, old_termios);
1944 spin_unlock_irqrestore(&info->slock, flags);
1945
1946 if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
1947 tty->hw_stopped = 0;
1948 mxser_start(tty);
1949 }
1950
1951 /* Handle sw stopped */
1952 if ((old_termios->c_iflag & IXON) && !I_IXON(tty)) {
1953 tty->stopped = 0;
1954
1955 if (info->board->chip_flag) {
1956 spin_lock_irqsave(&info->slock, flags);
1957 mxser_disable_must_rx_software_flow_control(
1958 info->ioaddr);
1959 spin_unlock_irqrestore(&info->slock, flags);
1960 }
1961
1962 mxser_start(tty);
1963 }
1964 }
1965
1966 /*
1967 * mxser_wait_until_sent() --- wait until the transmitter is empty
1968 */
1969 static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
1970 {
1971 struct mxser_port *info = tty->driver_data;
1972 unsigned long orig_jiffies, char_time;
1973 unsigned long flags;
1974 int lsr;
1975
1976 if (info->type == PORT_UNKNOWN)
1977 return;
1978
1979 if (info->xmit_fifo_size == 0)
1980 return; /* Just in case.... */
1981
1982 orig_jiffies = jiffies;
1983 /*
1984 * Set the check interval to be 1/5 of the estimated time to
1985 * send a single character, and make it at least 1. The check
1986 * interval should also be less than the timeout.
1987 *
1988 * Note: we have to use pretty tight timings here to satisfy
1989 * the NIST-PCTS.
1990 */
1991 char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
1992 char_time = char_time / 5;
1993 if (char_time == 0)
1994 char_time = 1;
1995 if (timeout && timeout < char_time)
1996 char_time = timeout;
1997 /*
1998 * If the transmitter hasn't cleared in twice the approximate
1999 * amount of time to send the entire FIFO, it probably won't
2000 * ever clear. This assumes the UART isn't doing flow
2001 * control, which is currently the case. Hence, if it ever
2002 * takes longer than info->timeout, this is probably due to a
2003 * UART bug of some kind. So, we clamp the timeout parameter at
2004 * 2*info->timeout.
2005 */
2006 if (!timeout || timeout > 2 * info->timeout)
2007 timeout = 2 * info->timeout;
2008
2009 spin_lock_irqsave(&info->slock, flags);
2010 while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
2011 spin_unlock_irqrestore(&info->slock, flags);
2012 schedule_timeout_interruptible(char_time);
2013 spin_lock_irqsave(&info->slock, flags);
2014 if (signal_pending(current))
2015 break;
2016 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2017 break;
2018 }
2019 spin_unlock_irqrestore(&info->slock, flags);
2020 set_current_state(TASK_RUNNING);
2021 }
2022
2023 /*
2024 * This routine is called by tty_hangup() when a hangup is signaled.
2025 */
2026 static void mxser_hangup(struct tty_struct *tty)
2027 {
2028 struct mxser_port *info = tty->driver_data;
2029
2030 mxser_flush_buffer(tty);
2031 tty_port_hangup(&info->port);
2032 }
2033
2034 /*
2035 * mxser_rs_break() --- routine which turns the break handling on or off
2036 */
2037 static int mxser_rs_break(struct tty_struct *tty, int break_state)
2038 {
2039 struct mxser_port *info = tty->driver_data;
2040 unsigned long flags;
2041
2042 spin_lock_irqsave(&info->slock, flags);
2043 if (break_state == -1)
2044 outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
2045 info->ioaddr + UART_LCR);
2046 else
2047 outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
2048 info->ioaddr + UART_LCR);
2049 spin_unlock_irqrestore(&info->slock, flags);
2050 return 0;
2051 }
2052
2053 static void mxser_receive_chars(struct tty_struct *tty,
2054 struct mxser_port *port, int *status)
2055 {
2056 unsigned char ch, gdl;
2057 int ignored = 0;
2058 int cnt = 0;
2059 int recv_room;
2060 int max = 256;
2061
2062 recv_room = tty->receive_room;
2063 if (recv_room == 0 && !port->ldisc_stop_rx)
2064 mxser_stoprx(tty);
2065 if (port->board->chip_flag != MOXA_OTHER_UART) {
2066
2067 if (*status & UART_LSR_SPECIAL)
2068 goto intr_old;
2069 if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
2070 (*status & MOXA_MUST_LSR_RERR))
2071 goto intr_old;
2072 if (*status & MOXA_MUST_LSR_RERR)
2073 goto intr_old;
2074
2075 gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
2076
2077 if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
2078 gdl &= MOXA_MUST_GDL_MASK;
2079 if (gdl >= recv_room) {
2080 if (!port->ldisc_stop_rx)
2081 mxser_stoprx(tty);
2082 }
2083 while (gdl--) {
2084 ch = inb(port->ioaddr + UART_RX);
2085 tty_insert_flip_char(&port->port, ch, 0);
2086 cnt++;
2087 }
2088 goto end_intr;
2089 }
2090 intr_old:
2091
2092 do {
2093 if (max-- < 0)
2094 break;
2095
2096 ch = inb(port->ioaddr + UART_RX);
2097 if (port->board->chip_flag && (*status & UART_LSR_OE))
2098 outb(0x23, port->ioaddr + UART_FCR);
2099 *status &= port->read_status_mask;
2100 if (*status & port->ignore_status_mask) {
2101 if (++ignored > 100)
2102 break;
2103 } else {
2104 char flag = 0;
2105 if (*status & UART_LSR_SPECIAL) {
2106 if (*status & UART_LSR_BI) {
2107 flag = TTY_BREAK;
2108 port->icount.brk++;
2109
2110 if (port->port.flags & ASYNC_SAK)
2111 do_SAK(tty);
2112 } else if (*status & UART_LSR_PE) {
2113 flag = TTY_PARITY;
2114 port->icount.parity++;
2115 } else if (*status & UART_LSR_FE) {
2116 flag = TTY_FRAME;
2117 port->icount.frame++;
2118 } else if (*status & UART_LSR_OE) {
2119 flag = TTY_OVERRUN;
2120 port->icount.overrun++;
2121 } else
2122 flag = TTY_BREAK;
2123 }
2124 tty_insert_flip_char(&port->port, ch, flag);
2125 cnt++;
2126 if (cnt >= recv_room) {
2127 if (!port->ldisc_stop_rx)
2128 mxser_stoprx(tty);
2129 break;
2130 }
2131
2132 }
2133
2134 if (port->board->chip_flag)
2135 break;
2136
2137 *status = inb(port->ioaddr + UART_LSR);
2138 } while (*status & UART_LSR_DR);
2139
2140 end_intr:
2141 mxvar_log.rxcnt[tty->index] += cnt;
2142 port->mon_data.rxcnt += cnt;
2143 port->mon_data.up_rxcnt += cnt;
2144
2145 /*
2146 * We are called from an interrupt context with &port->slock
2147 * being held. Drop it temporarily in order to prevent
2148 * recursive locking.
2149 */
2150 spin_unlock(&port->slock);
2151 tty_flip_buffer_push(&port->port);
2152 spin_lock(&port->slock);
2153 }
2154
2155 static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port)
2156 {
2157 int count, cnt;
2158
2159 if (port->x_char) {
2160 outb(port->x_char, port->ioaddr + UART_TX);
2161 port->x_char = 0;
2162 mxvar_log.txcnt[tty->index]++;
2163 port->mon_data.txcnt++;
2164 port->mon_data.up_txcnt++;
2165 port->icount.tx++;
2166 return;
2167 }
2168
2169 if (port->port.xmit_buf == NULL)
2170 return;
2171
2172 if (port->xmit_cnt <= 0 || tty->stopped ||
2173 (tty->hw_stopped &&
2174 (port->type != PORT_16550A) &&
2175 (!port->board->chip_flag))) {
2176 port->IER &= ~UART_IER_THRI;
2177 outb(port->IER, port->ioaddr + UART_IER);
2178 return;
2179 }
2180
2181 cnt = port->xmit_cnt;
2182 count = port->xmit_fifo_size;
2183 do {
2184 outb(port->port.xmit_buf[port->xmit_tail++],
2185 port->ioaddr + UART_TX);
2186 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
2187 if (--port->xmit_cnt <= 0)
2188 break;
2189 } while (--count > 0);
2190 mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt);
2191
2192 port->mon_data.txcnt += (cnt - port->xmit_cnt);
2193 port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
2194 port->icount.tx += (cnt - port->xmit_cnt);
2195
2196 if (port->xmit_cnt < WAKEUP_CHARS)
2197 tty_wakeup(tty);
2198
2199 if (port->xmit_cnt <= 0) {
2200 port->IER &= ~UART_IER_THRI;
2201 outb(port->IER, port->ioaddr + UART_IER);
2202 }
2203 }
2204
2205 /*
2206 * This is the serial driver's generic interrupt routine
2207 */
2208 static irqreturn_t mxser_interrupt(int irq, void *dev_id)
2209 {
2210 int status, iir, i;
2211 struct mxser_board *brd = NULL;
2212 struct mxser_port *port;
2213 int max, irqbits, bits, msr;
2214 unsigned int int_cnt, pass_counter = 0;
2215 int handled = IRQ_NONE;
2216 struct tty_struct *tty;
2217
2218 for (i = 0; i < MXSER_BOARDS; i++)
2219 if (dev_id == &mxser_boards[i]) {
2220 brd = dev_id;
2221 break;
2222 }
2223
2224 if (i == MXSER_BOARDS)
2225 goto irq_stop;
2226 if (brd == NULL)
2227 goto irq_stop;
2228 max = brd->info->nports;
2229 while (pass_counter++ < MXSER_ISR_PASS_LIMIT) {
2230 irqbits = inb(brd->vector) & brd->vector_mask;
2231 if (irqbits == brd->vector_mask)
2232 break;
2233
2234 handled = IRQ_HANDLED;
2235 for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
2236 if (irqbits == brd->vector_mask)
2237 break;
2238 if (bits & irqbits)
2239 continue;
2240 port = &brd->ports[i];
2241
2242 int_cnt = 0;
2243 spin_lock(&port->slock);
2244 do {
2245 iir = inb(port->ioaddr + UART_IIR);
2246 if (iir & UART_IIR_NO_INT)
2247 break;
2248 iir &= MOXA_MUST_IIR_MASK;
2249 tty = tty_port_tty_get(&port->port);
2250 if (!tty || port->closing ||
2251 !tty_port_initialized(&port->port)) {
2252 status = inb(port->ioaddr + UART_LSR);
2253 outb(0x27, port->ioaddr + UART_FCR);
2254 inb(port->ioaddr + UART_MSR);
2255 tty_kref_put(tty);
2256 break;
2257 }
2258
2259 status = inb(port->ioaddr + UART_LSR);
2260
2261 if (status & UART_LSR_PE)
2262 port->err_shadow |= NPPI_NOTIFY_PARITY;
2263 if (status & UART_LSR_FE)
2264 port->err_shadow |= NPPI_NOTIFY_FRAMING;
2265 if (status & UART_LSR_OE)
2266 port->err_shadow |=
2267 NPPI_NOTIFY_HW_OVERRUN;
2268 if (status & UART_LSR_BI)
2269 port->err_shadow |= NPPI_NOTIFY_BREAK;
2270
2271 if (port->board->chip_flag) {
2272 if (iir == MOXA_MUST_IIR_GDA ||
2273 iir == MOXA_MUST_IIR_RDA ||
2274 iir == MOXA_MUST_IIR_RTO ||
2275 iir == MOXA_MUST_IIR_LSR)
2276 mxser_receive_chars(tty, port,
2277 &status);
2278
2279 } else {
2280 status &= port->read_status_mask;
2281 if (status & UART_LSR_DR)
2282 mxser_receive_chars(tty, port,
2283 &status);
2284 }
2285 msr = inb(port->ioaddr + UART_MSR);
2286 if (msr & UART_MSR_ANY_DELTA)
2287 mxser_check_modem_status(tty, port, msr);
2288
2289 if (port->board->chip_flag) {
2290 if (iir == 0x02 && (status &
2291 UART_LSR_THRE))
2292 mxser_transmit_chars(tty, port);
2293 } else {
2294 if (status & UART_LSR_THRE)
2295 mxser_transmit_chars(tty, port);
2296 }
2297 tty_kref_put(tty);
2298 } while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
2299 spin_unlock(&port->slock);
2300 }
2301 }
2302
2303 irq_stop:
2304 return handled;
2305 }
2306
2307 static const struct tty_operations mxser_ops = {
2308 .open = mxser_open,
2309 .close = mxser_close,
2310 .write = mxser_write,
2311 .put_char = mxser_put_char,
2312 .flush_chars = mxser_flush_chars,
2313 .write_room = mxser_write_room,
2314 .chars_in_buffer = mxser_chars_in_buffer,
2315 .flush_buffer = mxser_flush_buffer,
2316 .ioctl = mxser_ioctl,
2317 .throttle = mxser_throttle,
2318 .unthrottle = mxser_unthrottle,
2319 .set_termios = mxser_set_termios,
2320 .stop = mxser_stop,
2321 .start = mxser_start,
2322 .hangup = mxser_hangup,
2323 .break_ctl = mxser_rs_break,
2324 .wait_until_sent = mxser_wait_until_sent,
2325 .tiocmget = mxser_tiocmget,
2326 .tiocmset = mxser_tiocmset,
2327 .get_icount = mxser_get_icount,
2328 };
2329
2330 static const struct tty_port_operations mxser_port_ops = {
2331 .carrier_raised = mxser_carrier_raised,
2332 .dtr_rts = mxser_dtr_rts,
2333 .activate = mxser_activate,
2334 .shutdown = mxser_shutdown_port,
2335 };
2336
2337 /*
2338 * The MOXA Smartio/Industio serial driver boot-time initialization code!
2339 */
2340
2341 static bool allow_overlapping_vector;
2342 module_param(allow_overlapping_vector, bool, S_IRUGO);
2343 MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)");
2344
2345 static bool mxser_overlapping_vector(struct mxser_board *brd)
2346 {
2347 return allow_overlapping_vector &&
2348 brd->vector >= brd->ports[0].ioaddr &&
2349 brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports;
2350 }
2351
2352 static int mxser_request_vector(struct mxser_board *brd)
2353 {
2354 if (mxser_overlapping_vector(brd))
2355 return 0;
2356 return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO;
2357 }
2358
2359 static void mxser_release_vector(struct mxser_board *brd)
2360 {
2361 if (mxser_overlapping_vector(brd))
2362 return;
2363 release_region(brd->vector, 1);
2364 }
2365
2366 static void mxser_release_ISA_res(struct mxser_board *brd)
2367 {
2368 release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
2369 mxser_release_vector(brd);
2370 }
2371
2372 static int mxser_initbrd(struct mxser_board *brd,
2373 struct pci_dev *pdev)
2374 {
2375 struct mxser_port *info;
2376 unsigned int i;
2377 int retval;
2378
2379 printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
2380 brd->ports[0].max_baud);
2381
2382 for (i = 0; i < brd->info->nports; i++) {
2383 info = &brd->ports[i];
2384 tty_port_init(&info->port);
2385 info->port.ops = &mxser_port_ops;
2386 info->board = brd;
2387 info->stop_rx = 0;
2388 info->ldisc_stop_rx = 0;
2389
2390 /* Enhance mode enabled here */
2391 if (brd->chip_flag != MOXA_OTHER_UART)
2392 mxser_enable_must_enchance_mode(info->ioaddr);
2393
2394 info->type = brd->uart_type;
2395
2396 process_txrx_fifo(info);
2397
2398 info->custom_divisor = info->baud_base * 16;
2399 info->port.close_delay = 5 * HZ / 10;
2400 info->port.closing_wait = 30 * HZ;
2401 info->normal_termios = mxvar_sdriver->init_termios;
2402 memset(&info->mon_data, 0, sizeof(struct mxser_mon));
2403 info->err_shadow = 0;
2404 spin_lock_init(&info->slock);
2405
2406 /* before set INT ISR, disable all int */
2407 outb(inb(info->ioaddr + UART_IER) & 0xf0,
2408 info->ioaddr + UART_IER);
2409 }
2410
2411 retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
2412 brd);
2413 if (retval) {
2414 for (i = 0; i < brd->info->nports; i++)
2415 tty_port_destroy(&brd->ports[i].port);
2416 printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
2417 "conflict with another device.\n",
2418 brd->info->name, brd->irq);
2419 }
2420
2421 return retval;
2422 }
2423
2424 static void mxser_board_remove(struct mxser_board *brd)
2425 {
2426 unsigned int i;
2427
2428 for (i = 0; i < brd->info->nports; i++) {
2429 tty_unregister_device(mxvar_sdriver, brd->idx + i);
2430 tty_port_destroy(&brd->ports[i].port);
2431 }
2432 free_irq(brd->irq, brd);
2433 }
2434
2435 static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
2436 {
2437 int id, i, bits, ret;
2438 unsigned short regs[16], irq;
2439 unsigned char scratch, scratch2;
2440
2441 brd->chip_flag = MOXA_OTHER_UART;
2442
2443 id = mxser_read_register(cap, regs);
2444 switch (id) {
2445 case C168_ASIC_ID:
2446 brd->info = &mxser_cards[0];
2447 break;
2448 case C104_ASIC_ID:
2449 brd->info = &mxser_cards[1];
2450 break;
2451 case CI104J_ASIC_ID:
2452 brd->info = &mxser_cards[2];
2453 break;
2454 case C102_ASIC_ID:
2455 brd->info = &mxser_cards[5];
2456 break;
2457 case CI132_ASIC_ID:
2458 brd->info = &mxser_cards[6];
2459 break;
2460 case CI134_ASIC_ID:
2461 brd->info = &mxser_cards[7];
2462 break;
2463 default:
2464 return 0;
2465 }
2466
2467 irq = 0;
2468 /* some ISA cards have 2 ports, but we want to see them as 4-port (why?)
2469 Flag-hack checks if configuration should be read as 2-port here. */
2470 if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) {
2471 irq = regs[9] & 0xF000;
2472 irq = irq | (irq >> 4);
2473 if (irq != (regs[9] & 0xFF00))
2474 goto err_irqconflict;
2475 } else if (brd->info->nports == 4) {
2476 irq = regs[9] & 0xF000;
2477 irq = irq | (irq >> 4);
2478 irq = irq | (irq >> 8);
2479 if (irq != regs[9])
2480 goto err_irqconflict;
2481 } else if (brd->info->nports == 8) {
2482 irq = regs[9] & 0xF000;
2483 irq = irq | (irq >> 4);
2484 irq = irq | (irq >> 8);
2485 if ((irq != regs[9]) || (irq != regs[10]))
2486 goto err_irqconflict;
2487 }
2488
2489 if (!irq) {
2490 printk(KERN_ERR "mxser: interrupt number unset\n");
2491 return -EIO;
2492 }
2493 brd->irq = ((int)(irq & 0xF000) >> 12);
2494 for (i = 0; i < 8; i++)
2495 brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
2496 if ((regs[12] & 0x80) == 0) {
2497 printk(KERN_ERR "mxser: invalid interrupt vector\n");
2498 return -EIO;
2499 }
2500 brd->vector = (int)regs[11]; /* interrupt vector */
2501 if (id == 1)
2502 brd->vector_mask = 0x00FF;
2503 else
2504 brd->vector_mask = 0x000F;
2505 for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
2506 if (regs[12] & bits) {
2507 brd->ports[i].baud_base = 921600;
2508 brd->ports[i].max_baud = 921600;
2509 } else {
2510 brd->ports[i].baud_base = 115200;
2511 brd->ports[i].max_baud = 115200;
2512 }
2513 }
2514 scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
2515 outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
2516 outb(0, cap + UART_EFR); /* EFR is the same as FCR */
2517 outb(scratch2, cap + UART_LCR);
2518 outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
2519 scratch = inb(cap + UART_IIR);
2520
2521 if (scratch & 0xC0)
2522 brd->uart_type = PORT_16550A;
2523 else
2524 brd->uart_type = PORT_16450;
2525 if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
2526 "mxser(IO)")) {
2527 printk(KERN_ERR "mxser: can't request ports I/O region: "
2528 "0x%.8lx-0x%.8lx\n",
2529 brd->ports[0].ioaddr, brd->ports[0].ioaddr +
2530 8 * brd->info->nports - 1);
2531 return -EIO;
2532 }
2533
2534 ret = mxser_request_vector(brd);
2535 if (ret) {
2536 release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
2537 printk(KERN_ERR "mxser: can't request interrupt vector region: "
2538 "0x%.8lx-0x%.8lx\n",
2539 brd->ports[0].ioaddr, brd->ports[0].ioaddr +
2540 8 * brd->info->nports - 1);
2541 return ret;
2542 }
2543 return brd->info->nports;
2544
2545 err_irqconflict:
2546 printk(KERN_ERR "mxser: invalid interrupt number\n");
2547 return -EIO;
2548 }
2549
2550 static int mxser_probe(struct pci_dev *pdev,
2551 const struct pci_device_id *ent)
2552 {
2553 #ifdef CONFIG_PCI
2554 struct mxser_board *brd;
2555 unsigned int i, j;
2556 unsigned long ioaddress;
2557 struct device *tty_dev;
2558 int retval = -EINVAL;
2559
2560 for (i = 0; i < MXSER_BOARDS; i++)
2561 if (mxser_boards[i].info == NULL)
2562 break;
2563
2564 if (i >= MXSER_BOARDS) {
2565 dev_err(&pdev->dev, "too many boards found (maximum %d), board "
2566 "not configured\n", MXSER_BOARDS);
2567 goto err;
2568 }
2569
2570 brd = &mxser_boards[i];
2571 brd->idx = i * MXSER_PORTS_PER_BOARD;
2572 dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
2573 mxser_cards[ent->driver_data].name,
2574 pdev->bus->number, PCI_SLOT(pdev->devfn));
2575
2576 retval = pci_enable_device(pdev);
2577 if (retval) {
2578 dev_err(&pdev->dev, "PCI enable failed\n");
2579 goto err;
2580 }
2581
2582 /* io address */
2583 ioaddress = pci_resource_start(pdev, 2);
2584 retval = pci_request_region(pdev, 2, "mxser(IO)");
2585 if (retval)
2586 goto err_dis;
2587
2588 brd->info = &mxser_cards[ent->driver_data];
2589 for (i = 0; i < brd->info->nports; i++)
2590 brd->ports[i].ioaddr = ioaddress + 8 * i;
2591
2592 /* vector */
2593 ioaddress = pci_resource_start(pdev, 3);
2594 retval = pci_request_region(pdev, 3, "mxser(vector)");
2595 if (retval)
2596 goto err_zero;
2597 brd->vector = ioaddress;
2598
2599 /* irq */
2600 brd->irq = pdev->irq;
2601
2602 brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr);
2603 brd->uart_type = PORT_16550A;
2604 brd->vector_mask = 0;
2605
2606 for (i = 0; i < brd->info->nports; i++) {
2607 for (j = 0; j < UART_INFO_NUM; j++) {
2608 if (Gpci_uart_info[j].type == brd->chip_flag) {
2609 brd->ports[i].max_baud =
2610 Gpci_uart_info[j].max_baud;
2611
2612 /* exception....CP-102 */
2613 if (brd->info->flags & MXSER_HIGHBAUD)
2614 brd->ports[i].max_baud = 921600;
2615 break;
2616 }
2617 }
2618 }
2619
2620 if (brd->chip_flag == MOXA_MUST_MU860_HWID) {
2621 for (i = 0; i < brd->info->nports; i++) {
2622 if (i < 4)
2623 brd->ports[i].opmode_ioaddr = ioaddress + 4;
2624 else
2625 brd->ports[i].opmode_ioaddr = ioaddress + 0x0c;
2626 }
2627 outb(0, ioaddress + 4); /* default set to RS232 mode */
2628 outb(0, ioaddress + 0x0c); /* default set to RS232 mode */
2629 }
2630
2631 for (i = 0; i < brd->info->nports; i++) {
2632 brd->vector_mask |= (1 << i);
2633 brd->ports[i].baud_base = 921600;
2634 }
2635
2636 /* mxser_initbrd will hook ISR. */
2637 retval = mxser_initbrd(brd, pdev);
2638 if (retval)
2639 goto err_rel3;
2640
2641 for (i = 0; i < brd->info->nports; i++) {
2642 tty_dev = tty_port_register_device(&brd->ports[i].port,
2643 mxvar_sdriver, brd->idx + i, &pdev->dev);
2644 if (IS_ERR(tty_dev)) {
2645 retval = PTR_ERR(tty_dev);
2646 for (; i > 0; i--)
2647 tty_unregister_device(mxvar_sdriver,
2648 brd->idx + i - 1);
2649 goto err_relbrd;
2650 }
2651 }
2652
2653 pci_set_drvdata(pdev, brd);
2654
2655 return 0;
2656 err_relbrd:
2657 for (i = 0; i < brd->info->nports; i++)
2658 tty_port_destroy(&brd->ports[i].port);
2659 free_irq(brd->irq, brd);
2660 err_rel3:
2661 pci_release_region(pdev, 3);
2662 err_zero:
2663 brd->info = NULL;
2664 pci_release_region(pdev, 2);
2665 err_dis:
2666 pci_disable_device(pdev);
2667 err:
2668 return retval;
2669 #else
2670 return -ENODEV;
2671 #endif
2672 }
2673
2674 static void mxser_remove(struct pci_dev *pdev)
2675 {
2676 #ifdef CONFIG_PCI
2677 struct mxser_board *brd = pci_get_drvdata(pdev);
2678
2679 mxser_board_remove(brd);
2680
2681 pci_release_region(pdev, 2);
2682 pci_release_region(pdev, 3);
2683 pci_disable_device(pdev);
2684 brd->info = NULL;
2685 #endif
2686 }
2687
2688 static struct pci_driver mxser_driver = {
2689 .name = "mxser",
2690 .id_table = mxser_pcibrds,
2691 .probe = mxser_probe,
2692 .remove = mxser_remove
2693 };
2694
2695 static int __init mxser_module_init(void)
2696 {
2697 struct mxser_board *brd;
2698 struct device *tty_dev;
2699 unsigned int b, i, m;
2700 int retval;
2701
2702 mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
2703 if (!mxvar_sdriver)
2704 return -ENOMEM;
2705
2706 printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
2707 MXSER_VERSION);
2708
2709 /* Initialize the tty_driver structure */
2710 mxvar_sdriver->name = "ttyMI";
2711 mxvar_sdriver->major = ttymajor;
2712 mxvar_sdriver->minor_start = 0;
2713 mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
2714 mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
2715 mxvar_sdriver->init_termios = tty_std_termios;
2716 mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
2717 mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV;
2718 tty_set_operations(mxvar_sdriver, &mxser_ops);
2719
2720 retval = tty_register_driver(mxvar_sdriver);
2721 if (retval) {
2722 printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family "
2723 "tty driver !\n");
2724 goto err_put;
2725 }
2726
2727 /* Start finding ISA boards here */
2728 for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
2729 if (!ioaddr[b])
2730 continue;
2731
2732 brd = &mxser_boards[m];
2733 retval = mxser_get_ISA_conf(ioaddr[b], brd);
2734 if (retval <= 0) {
2735 brd->info = NULL;
2736 continue;
2737 }
2738
2739 printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
2740 brd->info->name, ioaddr[b]);
2741
2742 /* mxser_initbrd will hook ISR. */
2743 if (mxser_initbrd(brd, NULL) < 0) {
2744 mxser_release_ISA_res(brd);
2745 brd->info = NULL;
2746 continue;
2747 }
2748
2749 brd->idx = m * MXSER_PORTS_PER_BOARD;
2750 for (i = 0; i < brd->info->nports; i++) {
2751 tty_dev = tty_port_register_device(&brd->ports[i].port,
2752 mxvar_sdriver, brd->idx + i, NULL);
2753 if (IS_ERR(tty_dev)) {
2754 for (; i > 0; i--)
2755 tty_unregister_device(mxvar_sdriver,
2756 brd->idx + i - 1);
2757 for (i = 0; i < brd->info->nports; i++)
2758 tty_port_destroy(&brd->ports[i].port);
2759 free_irq(brd->irq, brd);
2760 mxser_release_ISA_res(brd);
2761 brd->info = NULL;
2762 break;
2763 }
2764 }
2765 if (brd->info == NULL)
2766 continue;
2767
2768 m++;
2769 }
2770
2771 retval = pci_register_driver(&mxser_driver);
2772 if (retval) {
2773 printk(KERN_ERR "mxser: can't register pci driver\n");
2774 if (!m) {
2775 retval = -ENODEV;
2776 goto err_unr;
2777 } /* else: we have some ISA cards under control */
2778 }
2779
2780 return 0;
2781 err_unr:
2782 tty_unregister_driver(mxvar_sdriver);
2783 err_put:
2784 put_tty_driver(mxvar_sdriver);
2785 return retval;
2786 }
2787
2788 static void __exit mxser_module_exit(void)
2789 {
2790 unsigned int i;
2791
2792 pci_unregister_driver(&mxser_driver);
2793
2794 for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
2795 if (mxser_boards[i].info != NULL)
2796 mxser_board_remove(&mxser_boards[i]);
2797 tty_unregister_driver(mxvar_sdriver);
2798 put_tty_driver(mxvar_sdriver);
2799
2800 for (i = 0; i < MXSER_BOARDS; i++)
2801 if (mxser_boards[i].info != NULL)
2802 mxser_release_ISA_res(&mxser_boards[i]);
2803 }
2804
2805 module_init(mxser_module_init);
2806 module_exit(mxser_module_exit);
Ubuntu Artful kernel mirror