drivers/uio/Kconfig

   1 menuconfig UIO
   2         tristate "Userspace I/O drivers"
   3         depends on MMU
   4         help
   5           Enable this to allow the userspace driver core code to be
   6           built.  This code allows userspace programs easy access to
   7           kernel interrupts and memory locations, allowing some drivers
   8           to be written in userspace.  Note that a small kernel driver
   9           is also required for interrupt handling to work properly.
  10
  11           If you don't know what to do here, say N.
  12
  13 if UIO
  14
  15 config UIO_CIF
  16         tristate "generic Hilscher CIF Card driver"
  17         depends on PCI
  18         help
  19           Driver for Hilscher CIF DeviceNet and Profibus cards.  This
  20           driver requires a userspace component called cif that handles
  21           all of the heavy lifting and can be found at:
  22                 <http://www.osadl.org/projects/downloads/UIO/user/>
  23
  24           To compile this driver as a module, choose M here: the module
  25           will be called uio_cif.
  26
  27 config UIO_PDRV_GENIRQ
  28         tristate "Userspace I/O platform driver with generic IRQ handling"
  29         help
  30           Platform driver for Userspace I/O devices, including generic
  31           interrupt handling code. Shared interrupts are not supported.
  32
  33           This kernel driver requires that the matching userspace driver
  34           handles interrupts in a special way. Userspace is responsible
  35           for acknowledging the hardware device if needed, and re-enabling
  36           interrupts in the interrupt controller using the write() syscall.
  37
  38           If you don't know what to do here, say N.
  39
  40 config UIO_DMEM_GENIRQ
  41         tristate "Userspace platform driver with generic irq and dynamic memory"
  42         depends on HAS_DMA
  43         help
  44           Platform driver for Userspace I/O devices, including generic
  45           interrupt handling code. Shared interrupts are not supported.
  46
  47           Memory regions can be specified with the same platform device
  48           resources as the UIO_PDRV drivers, but dynamic regions can also
  49           be specified.
  50           The number and size of these regions is static,
  51           but the memory allocation is not performed until
  52           the associated device file is opened. The
  53           memory is freed once the uio device is closed.
  54
  55           If you don't know what to do here, say N.
  56
  57 config UIO_AEC
  58         tristate "AEC video timestamp device"
  59         depends on PCI
  60         help
  61
  62           UIO driver for the Adrienne Electronics Corporation PCI time
  63           code device.
  64
  65           This device differs from other UIO devices since it uses I/O
  66           ports instead of memory mapped I/O. In order to make it
  67           possible for UIO to work with this device a utility, uioport,
  68           can be used to read and write the ports:
  69
  70             git clone git://ifup.org/philips/uioport.git
  71
  72           If you compile this as a module, it will be called uio_aec.
  73
  74 config UIO_SERCOS3
  75         tristate "Automata Sercos III PCI card driver"
  76         depends on PCI
  77         help
  78           Userspace I/O interface for the Sercos III PCI card from
  79           Automata GmbH. The userspace part of this driver will be
  80           available for download from the Automata GmbH web site.
  81
  82           Automata GmbH:        http://www.automataweb.com
  83           Sercos III interface: http://www.sercos.com
  84
  85           If you compile this as a module, it will be called uio_sercos3.
  86
  87 config UIO_PCI_GENERIC
  88         tristate "Generic driver for PCI 2.3 and PCI Express cards"
  89         depends on PCI
  90         help
  91           Generic driver that you can bind, dynamically, to any
  92           PCI 2.3 compliant and PCI Express card. It is useful,
  93           primarily, for virtualization scenarios.
  94           If you compile this as a module, it will be called uio_pci_generic.
  95
  96 config UIO_NETX
  97         tristate "Hilscher NetX Card driver"
  98         depends on PCI
  99         help
 100           Driver for Hilscher NetX based fieldbus cards (cifX, comX).
 101           This driver requires a userspace component that comes with the card
 102           or is available from Hilscher (http://www.hilscher.com).
 103
 104           To compile this driver as a module, choose M here; the module
 105           will be called uio_netx.
 106
 107 config UIO_FSL_ELBC_GPCM
 108         tristate "eLBC/GPCM driver"
 109         depends on FSL_LBC
 110         help
 111           Generic driver for accessing a peripheral connected to an eLBC port
 112           that is running in GPCM mode. GPCM is an interface for simple lower
 113           performance memories and memory-mapped devices. For devices using
 114           FCM or UPM eLBC modes, other device-specific drivers are available.
 115
 116 config UIO_FSL_ELBC_GPCM_NETX5152
 117         bool "eLBC/GPCM netX 51/52 support"
 118         depends on UIO_FSL_ELBC_GPCM
 119         help
 120           This will add support for netX 51/52 devices connected via eLBC/GPCM.
 121           In particular, it implements interrupt handling. This can be used
 122           together with the userspace netX stack from Hilscher.
 123
 124           Information about this hardware can be found at:
 125           http://www.hilscher.com/netx
 126
 127 config UIO_PRUSS
 128         tristate "Texas Instruments PRUSS driver"
 129         select GENERIC_ALLOCATOR
 130         depends on HAS_IOMEM && HAS_DMA
 131         help
 132           PRUSS driver for OMAPL138/DA850/AM18XX devices
 133           PRUSS driver requires user space components, examples and user space
 134           driver is available from below SVN repo - you may use anonymous login
 135
 136           https://gforge.ti.com/gf/project/pru_sw/
 137
 138           More info on API is available at below wiki
 139
 140           http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
 141
 142           To compile this driver as a module, choose M here: the module
 143           will be called uio_pruss.
 144
 145 config UIO_MF624
 146         tristate "Humusoft MF624 DAQ PCI card driver"
 147         depends on PCI
 148         help
 149           Userspace I/O interface for the Humusoft MF624 PCI card.
 150           A sample userspace application using this driver is available
 151           (among other MF624 related information and software components)
 152           for download in a git repository:
 153
 154             git clone git://rtime.felk.cvut.cz/mf6xx.git
 155
 156           If you compile this as a module, it will be called uio_mf624.
 157
 158 endif