drivers/usb/chipidea/host.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * host.c - ChipIdea USB host controller driver
   4  *
   5  * Copyright (c) 2012 Intel Corporation
   6  *
   7  * Author: Alexander Shishkin
   8  */
   9
  10 #include <linux/kernel.h>
  11 #include <linux/io.h>
  12 #include <linux/usb.h>
  13 #include <linux/usb/hcd.h>
  14 #include <linux/usb/chipidea.h>
  15 #include <linux/regulator/consumer.h>
  16 #include <linux/pinctrl/consumer.h>
  17
  18 #include "../host/ehci.h"
  19
  20 #include "ci.h"
  21 #include "bits.h"
  22 #include "host.h"
  23
  24 static struct hc_driver __read_mostly ci_ehci_hc_driver;
  25 static int (*orig_bus_suspend)(struct usb_hcd *hcd);
  26
  27 struct ehci_ci_priv {
  28         struct regulator *reg_vbus;
  29 };
  30
  31 static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
  32 {
  33         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
  34         struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
  35         struct device *dev = hcd->self.controller;
  36         struct ci_hdrc *ci = dev_get_drvdata(dev);
  37         int ret = 0;
  38         int port = HCS_N_PORTS(ehci->hcs_params);
  39
  40         if (priv->reg_vbus) {
  41                 if (port > 1) {
  42                         dev_warn(dev,
  43                                 "Not support multi-port regulator control\n");
  44                         return 0;
  45                 }
  46                 if (enable)
  47                         ret = regulator_enable(priv->reg_vbus);
  48                 else
  49                         ret = regulator_disable(priv->reg_vbus);
  50                 if (ret) {
  51                         dev_err(dev,
  52                                 "Failed to %s vbus regulator, ret=%d\n",
  53                                 enable ? "enable" : "disable", ret);
  54                         return ret;
  55                 }
  56         }
  57
  58         if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
  59                 /*
  60                  * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
  61                  * As HSIC is always HS, this should be safe for others.
  62                  */
  63                 hw_port_test_set(ci, 5);
  64                 hw_port_test_set(ci, 0);
  65         }
  66         return 0;
  67 };
  68
  69 static int ehci_ci_reset(struct usb_hcd *hcd)
  70 {
  71         struct device *dev = hcd->self.controller;
  72         struct ci_hdrc *ci = dev_get_drvdata(dev);
  73         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
  74         int ret;
  75
  76         ret = ehci_setup(hcd);
  77         if (ret)
  78                 return ret;
  79
  80         ehci->need_io_watchdog = 0;
  81
  82         if (ci->platdata->notify_event) {
  83                 ret = ci->platdata->notify_event(ci,
  84                                 CI_HDRC_CONTROLLER_RESET_EVENT);
  85                 if (ret)
  86                         return ret;
  87         }
  88
  89         ci_platform_configure(ci);
  90
  91         return ret;
  92 }
  93
  94 static const struct ehci_driver_overrides ehci_ci_overrides = {
  95         .extra_priv_size = sizeof(struct ehci_ci_priv),
  96         .port_power      = ehci_ci_portpower,
  97         .reset           = ehci_ci_reset,
  98 };
  99
 100 static irqreturn_t host_irq(struct ci_hdrc *ci)
 101 {
 102         return usb_hcd_irq(ci->irq, ci->hcd);
 103 }
 104
 105 static int host_start(struct ci_hdrc *ci)
 106 {
 107         struct usb_hcd *hcd;
 108         struct ehci_hcd *ehci;
 109         struct ehci_ci_priv *priv;
 110         int ret;
 111
 112         if (usb_disabled())
 113                 return -ENODEV;
 114
 115         hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent,
 116                                ci->dev, dev_name(ci->dev), NULL);
 117         if (!hcd)
 118                 return -ENOMEM;
 119
 120         dev_set_drvdata(ci->dev, ci);
 121         hcd->rsrc_start = ci->hw_bank.phys;
 122         hcd->rsrc_len = ci->hw_bank.size;
 123         hcd->regs = ci->hw_bank.abs;
 124         hcd->has_tt = 1;
 125
 126         hcd->power_budget = ci->platdata->power_budget;
 127         hcd->tpl_support = ci->platdata->tpl_support;
 128         if (ci->phy || ci->usb_phy) {
 129                 hcd->skip_phy_initialization = 1;
 130                 if (ci->usb_phy)
 131                         hcd->usb_phy = ci->usb_phy;
 132         }
 133
 134         ehci = hcd_to_ehci(hcd);
 135         ehci->caps = ci->hw_bank.cap;
 136         ehci->has_hostpc = ci->hw_bank.lpm;
 137         ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
 138         ehci->imx28_write_fix = ci->imx28_write_fix;
 139
 140         priv = (struct ehci_ci_priv *)ehci->priv;
 141         priv->reg_vbus = NULL;
 142
 143         if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
 144                 if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
 145                         ret = regulator_enable(ci->platdata->reg_vbus);
 146                         if (ret) {
 147                                 dev_err(ci->dev,
 148                                 "Failed to enable vbus regulator, ret=%d\n",
 149                                                                         ret);
 150                                 goto put_hcd;
 151                         }
 152                 } else {
 153                         priv->reg_vbus = ci->platdata->reg_vbus;
 154                 }
 155         }
 156
 157         if (ci->platdata->pins_host)
 158                 pinctrl_select_state(ci->platdata->pctl,
 159                                      ci->platdata->pins_host);
 160
 161         ret = usb_add_hcd(hcd, 0, 0);
 162         if (ret) {
 163                 goto disable_reg;
 164         } else {
 165                 struct usb_otg *otg = &ci->otg;
 166
 167                 ci->hcd = hcd;
 168
 169                 if (ci_otg_is_fsm_mode(ci)) {
 170                         otg->host = &hcd->self;
 171                         hcd->self.otg_port = 1;
 172                 }
 173
 174                 if (ci->platdata->notify_event &&
 175                         (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC))
 176                         ci->platdata->notify_event
 177                                 (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT);
 178         }
 179
 180         return ret;
 181
 182 disable_reg:
 183         if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 184                         (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
 185                 regulator_disable(ci->platdata->reg_vbus);
 186 put_hcd:
 187         usb_put_hcd(hcd);
 188
 189         return ret;
 190 }
 191
 192 static void host_stop(struct ci_hdrc *ci)
 193 {
 194         struct usb_hcd *hcd = ci->hcd;
 195
 196         if (hcd) {
 197                 if (ci->platdata->notify_event)
 198                         ci->platdata->notify_event(ci,
 199                                 CI_HDRC_CONTROLLER_STOPPED_EVENT);
 200                 usb_remove_hcd(hcd);
 201                 ci->role = CI_ROLE_END;
 202                 synchronize_irq(ci->irq);
 203                 usb_put_hcd(hcd);
 204                 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 205                         (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
 206                                 regulator_disable(ci->platdata->reg_vbus);
 207         }
 208         ci->hcd = NULL;
 209         ci->otg.host = NULL;
 210
 211         if (ci->platdata->pins_host && ci->platdata->pins_default)
 212                 pinctrl_select_state(ci->platdata->pctl,
 213                                      ci->platdata->pins_default);
 214 }
 215
 216
 217 void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 218 {
 219         if (ci->role == CI_ROLE_HOST && ci->hcd)
 220                 host_stop(ci);
 221 }
 222
 223 /* The below code is based on tegra ehci driver */
 224 static int ci_ehci_hub_control(
 225         struct usb_hcd  *hcd,
 226         u16             typeReq,
 227         u16             wValue,
 228         u16             wIndex,
 229         char            *buf,
 230         u16             wLength
 231 )
 232 {
 233         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 234         u32 __iomem     *status_reg;
 235         u32             temp;
 236         unsigned long   flags;
 237         int             retval = 0;
 238         struct device *dev = hcd->self.controller;
 239         struct ci_hdrc *ci = dev_get_drvdata(dev);
 240
 241         status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
 242
 243         spin_lock_irqsave(&ehci->lock, flags);
 244
 245         if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
 246                 temp = ehci_readl(ehci, status_reg);
 247                 if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
 248                         retval = -EPIPE;
 249                         goto done;
 250                 }
 251
 252                 temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
 253                 temp |= PORT_WKDISC_E | PORT_WKOC_E;
 254                 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 255
 256                 /*
 257                  * If a transaction is in progress, there may be a delay in
 258                  * suspending the port. Poll until the port is suspended.
 259                  */
 260                 if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
 261                         PORT_SUSPEND, 5000))
 262                         ehci_err(ehci, "timeout waiting for SUSPEND\n");
 263
 264                 if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
 265                         if (ci->platdata->notify_event)
 266                                 ci->platdata->notify_event(ci,
 267                                         CI_HDRC_IMX_HSIC_SUSPEND_EVENT);
 268
 269                         temp = ehci_readl(ehci, status_reg);
 270                         temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
 271                         ehci_writel(ehci, temp, status_reg);
 272                 }
 273
 274                 set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
 275                 goto done;
 276         }
 277
 278         /*
 279          * After resume has finished, it needs do some post resume
 280          * operation for some SoCs.
 281          */
 282         else if (typeReq == ClearPortFeature &&
 283                 wValue == USB_PORT_FEAT_C_SUSPEND) {
 284                 /* Make sure the resume has finished, it should be finished */
 285                 if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000))
 286                         ehci_err(ehci, "timeout waiting for resume\n");
 287         }
 288
 289         spin_unlock_irqrestore(&ehci->lock, flags);
 290
 291         /* Handle the hub control events here */
 292         return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
 293 done:
 294         spin_unlock_irqrestore(&ehci->lock, flags);
 295         return retval;
 296 }
 297 static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
 298 {
 299         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 300         struct device *dev = hcd->self.controller;
 301         struct ci_hdrc *ci = dev_get_drvdata(dev);
 302         int port;
 303         u32 tmp;
 304
 305         int ret = orig_bus_suspend(hcd);
 306
 307         if (ret)
 308                 return ret;
 309
 310         port = HCS_N_PORTS(ehci->hcs_params);
 311         while (port--) {
 312                 u32 __iomem *reg = &ehci->regs->port_status[port];
 313                 u32 portsc = ehci_readl(ehci, reg);
 314
 315                 if (portsc & PORT_CONNECT) {
 316                         /*
 317                          * For chipidea, the resume signal will be ended
 318                          * automatically, so for remote wakeup case, the
 319                          * usbcmd.rs may not be set before the resume has
 320                          * ended if other resume paths consumes too much
 321                          * time (~24ms), in that case, the SOF will not
 322                          * send out within 3ms after resume ends, then the
 323                          * high speed device will enter full speed mode.
 324                          */
 325
 326                         tmp = ehci_readl(ehci, &ehci->regs->command);
 327                         tmp |= CMD_RUN;
 328                         ehci_writel(ehci, tmp, &ehci->regs->command);
 329                         /*
 330                          * It needs a short delay between set RS bit and PHCD.
 331                          */
 332                         usleep_range(150, 200);
 333                         /*
 334                          * Need to clear WKCN and WKOC for imx HSIC,
 335                          * otherwise, there will be wakeup event.
 336                          */
 337                         if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
 338                                 tmp = ehci_readl(ehci, reg);
 339                                 tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
 340                                 ehci_writel(ehci, tmp, reg);
 341                         }
 342
 343                         break;
 344                 }
 345         }
 346
 347         return 0;
 348 }
 349
 350 int ci_hdrc_host_init(struct ci_hdrc *ci)
 351 {
 352         struct ci_role_driver *rdrv;
 353
 354         if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
 355                 return -ENXIO;
 356
 357         rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
 358         if (!rdrv)
 359                 return -ENOMEM;
 360
 361         rdrv->start     = host_start;
 362         rdrv->stop      = host_stop;
 363         rdrv->irq       = host_irq;
 364         rdrv->name      = "host";
 365         ci->roles[CI_ROLE_HOST] = rdrv;
 366
 367         return 0;
 368 }
 369
 370 void ci_hdrc_host_driver_init(void)
 371 {
 372         ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
 373         orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
 374         ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
 375         ci_ehci_hc_driver.hub_control = ci_ehci_hub_control;
 376 }