2 * ci13xxx_udc.c - MIPS USB IP core family device controller
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 * Description: MIPS USB IP core family device controller
15 * Currently it only supports IP part number CI13412
17 * This driver is composed of several blocks:
18 * - HW: hardware interface
19 * - DBG: debug facilities (optional)
21 * - ISR: interrupts handling
22 * - ENDPT: endpoint operations (Gadget API)
23 * - GADGET: gadget operations (Gadget API)
24 * - BUS: bus glue code, bus abstraction layer
27 * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
28 * - STALL_IN: non-empty bulk-in pipes cannot be halted
29 * if defined mass storage compliance succeeds but with warnings
33 * if undefined usbtest 13 fails
34 * - TRACE: enable function tracing (depends on DEBUG)
37 * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
38 * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
39 * - Normal & LPM support
42 * - OK: 0-12, 13 (STALL_IN defined) & 14
43 * - Not Supported: 15 & 16 (ISO)
47 * - Isochronous & Interrupt Traffic
48 * - Handle requests which spawns into several TDs
49 * - GET_STATUS(device) - always reports 0
50 * - Gadget API (majority of optional features)
51 * - Suspend & Remote Wakeup
53 #include <linux/delay.h>
54 #include <linux/device.h>
55 #include <linux/dmapool.h>
56 #include <linux/dma-mapping.h>
57 #include <linux/init.h>
58 #include <linux/interrupt.h>
60 #include <linux/irq.h>
61 #include <linux/kernel.h>
62 #include <linux/slab.h>
63 #include <linux/pm_runtime.h>
64 #include <linux/usb/ch9.h>
65 #include <linux/usb/gadget.h>
66 #include <linux/usb/otg.h>
68 #include "ci13xxx_udc.h"
71 /******************************************************************************
73 *****************************************************************************/
75 #define DMA_ADDR_INVALID (~(dma_addr_t)0)
77 /* ctrl register bank access */
78 static DEFINE_SPINLOCK(udc_lock
);
80 /* control endpoint description */
81 static const struct usb_endpoint_descriptor
82 ctrl_endpt_out_desc
= {
83 .bLength
= USB_DT_ENDPOINT_SIZE
,
84 .bDescriptorType
= USB_DT_ENDPOINT
,
86 .bEndpointAddress
= USB_DIR_OUT
,
87 .bmAttributes
= USB_ENDPOINT_XFER_CONTROL
,
88 .wMaxPacketSize
= cpu_to_le16(CTRL_PAYLOAD_MAX
),
91 static const struct usb_endpoint_descriptor
92 ctrl_endpt_in_desc
= {
93 .bLength
= USB_DT_ENDPOINT_SIZE
,
94 .bDescriptorType
= USB_DT_ENDPOINT
,
96 .bEndpointAddress
= USB_DIR_IN
,
97 .bmAttributes
= USB_ENDPOINT_XFER_CONTROL
,
98 .wMaxPacketSize
= cpu_to_le16(CTRL_PAYLOAD_MAX
),
102 static struct ci13xxx
*_udc
;
104 /* Interrupt statistics */
105 #define ISR_MASK 0x1F
122 * ffs_nr: find first (least significant) bit set
123 * @x: the word to search
125 * This function returns bit number (instead of position)
127 static int ffs_nr(u32 x
)
134 /******************************************************************************
136 *****************************************************************************/
137 /* register bank descriptor */
139 unsigned lpm
; /* is LPM? */
140 void __iomem
*abs
; /* bus map offset */
141 void __iomem
*cap
; /* bus map offset + CAP offset + CAP data */
142 size_t size
; /* bank size */
146 #define ABS_AHBBURST (0x0090UL)
147 #define ABS_AHBMODE (0x0098UL)
148 /* UDC register map */
149 #define ABS_CAPLENGTH (0x100UL)
150 #define ABS_HCCPARAMS (0x108UL)
151 #define ABS_DCCPARAMS (0x124UL)
152 #define ABS_TESTMODE (hw_bank.lpm ? 0x0FCUL : 0x138UL)
153 /* offset to CAPLENTGH (addr + data) */
154 #define CAP_USBCMD (0x000UL)
155 #define CAP_USBSTS (0x004UL)
156 #define CAP_USBINTR (0x008UL)
157 #define CAP_DEVICEADDR (0x014UL)
158 #define CAP_ENDPTLISTADDR (0x018UL)
159 #define CAP_PORTSC (0x044UL)
160 #define CAP_DEVLC (0x084UL)
161 #define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL)
162 #define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
163 #define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL)
164 #define CAP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL)
165 #define CAP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL)
166 #define CAP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL)
167 #define CAP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL)
168 #define CAP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL)
170 /* maximum number of enpoints: valid only after hw_device_reset() */
171 static unsigned hw_ep_max
;
174 * hw_ep_bit: calculates the bit number
175 * @num: endpoint number
176 * @dir: endpoint direction
178 * This function returns bit number
180 static inline int hw_ep_bit(int num
, int dir
)
182 return num
+ (dir
? 16 : 0);
186 * hw_aread: reads from register bitfield
187 * @addr: address relative to bus map
188 * @mask: bitfield mask
190 * This function returns register bitfield data
192 static u32
hw_aread(u32 addr
, u32 mask
)
194 return ioread32(addr
+ hw_bank
.abs
) & mask
;
198 * hw_awrite: writes to register bitfield
199 * @addr: address relative to bus map
200 * @mask: bitfield mask
203 static void hw_awrite(u32 addr
, u32 mask
, u32 data
)
205 iowrite32(hw_aread(addr
, ~mask
) | (data
& mask
),
210 * hw_cread: reads from register bitfield
211 * @addr: address relative to CAP offset plus content
212 * @mask: bitfield mask
214 * This function returns register bitfield data
216 static u32
hw_cread(u32 addr
, u32 mask
)
218 return ioread32(addr
+ hw_bank
.cap
) & mask
;
222 * hw_cwrite: writes to register bitfield
223 * @addr: address relative to CAP offset plus content
224 * @mask: bitfield mask
227 static void hw_cwrite(u32 addr
, u32 mask
, u32 data
)
229 iowrite32(hw_cread(addr
, ~mask
) | (data
& mask
),
234 * hw_ctest_and_clear: tests & clears register bitfield
235 * @addr: address relative to CAP offset plus content
236 * @mask: bitfield mask
238 * This function returns register bitfield data
240 static u32
hw_ctest_and_clear(u32 addr
, u32 mask
)
242 u32 reg
= hw_cread(addr
, mask
);
244 iowrite32(reg
, addr
+ hw_bank
.cap
);
249 * hw_ctest_and_write: tests & writes register bitfield
250 * @addr: address relative to CAP offset plus content
251 * @mask: bitfield mask
254 * This function returns register bitfield data
256 static u32
hw_ctest_and_write(u32 addr
, u32 mask
, u32 data
)
258 u32 reg
= hw_cread(addr
, ~0);
260 iowrite32((reg
& ~mask
) | (data
& mask
), addr
+ hw_bank
.cap
);
261 return (reg
& mask
) >> ffs_nr(mask
);
264 static int hw_device_init(void __iomem
*base
)
268 /* bank is a module variable */
271 hw_bank
.cap
= hw_bank
.abs
;
272 hw_bank
.cap
+= ABS_CAPLENGTH
;
273 hw_bank
.cap
+= ioread8(hw_bank
.cap
);
275 reg
= hw_aread(ABS_HCCPARAMS
, HCCPARAMS_LEN
) >> ffs_nr(HCCPARAMS_LEN
);
277 hw_bank
.size
= hw_bank
.cap
- hw_bank
.abs
;
278 hw_bank
.size
+= CAP_LAST
;
279 hw_bank
.size
/= sizeof(u32
);
281 reg
= hw_aread(ABS_DCCPARAMS
, DCCPARAMS_DEN
) >> ffs_nr(DCCPARAMS_DEN
);
282 hw_ep_max
= reg
* 2; /* cache hw ENDPT_MAX */
284 if (hw_ep_max
== 0 || hw_ep_max
> ENDPT_MAX
)
287 /* setup lock mode ? */
289 /* ENDPTSETUPSTAT is '0' by default */
291 /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
296 * hw_device_reset: resets chip (execute without interruption)
297 * @base: register base address
299 * This function returns an error code
301 static int hw_device_reset(struct ci13xxx
*udc
)
303 /* should flush & stop before reset */
304 hw_cwrite(CAP_ENDPTFLUSH
, ~0, ~0);
305 hw_cwrite(CAP_USBCMD
, USBCMD_RS
, 0);
307 hw_cwrite(CAP_USBCMD
, USBCMD_RST
, USBCMD_RST
);
308 while (hw_cread(CAP_USBCMD
, USBCMD_RST
))
309 udelay(10); /* not RTOS friendly */
312 if (udc
->udc_driver
->notify_event
)
313 udc
->udc_driver
->notify_event(udc
,
314 CI13XXX_CONTROLLER_RESET_EVENT
);
316 if (udc
->udc_driver
->flags
& CI13XXX_DISABLE_STREAMING
)
317 hw_cwrite(CAP_USBMODE
, USBMODE_SDIS
, USBMODE_SDIS
);
319 /* USBMODE should be configured step by step */
320 hw_cwrite(CAP_USBMODE
, USBMODE_CM
, USBMODE_CM_IDLE
);
321 hw_cwrite(CAP_USBMODE
, USBMODE_CM
, USBMODE_CM_DEVICE
);
322 hw_cwrite(CAP_USBMODE
, USBMODE_SLOM
, USBMODE_SLOM
); /* HW >= 2.3 */
324 if (hw_cread(CAP_USBMODE
, USBMODE_CM
) != USBMODE_CM_DEVICE
) {
325 pr_err("cannot enter in device mode");
326 pr_err("lpm = %i", hw_bank
.lpm
);
334 * hw_device_state: enables/disables interrupts & starts/stops device (execute
335 * without interruption)
336 * @dma: 0 => disable, !0 => enable and set dma engine
338 * This function returns an error code
340 static int hw_device_state(u32 dma
)
343 hw_cwrite(CAP_ENDPTLISTADDR
, ~0, dma
);
344 /* interrupt, error, port change, reset, sleep/suspend */
345 hw_cwrite(CAP_USBINTR
, ~0,
346 USBi_UI
|USBi_UEI
|USBi_PCI
|USBi_URI
|USBi_SLI
);
347 hw_cwrite(CAP_USBCMD
, USBCMD_RS
, USBCMD_RS
);
349 hw_cwrite(CAP_USBCMD
, USBCMD_RS
, 0);
350 hw_cwrite(CAP_USBINTR
, ~0, 0);
356 * hw_ep_flush: flush endpoint fifo (execute without interruption)
357 * @num: endpoint number
358 * @dir: endpoint direction
360 * This function returns an error code
362 static int hw_ep_flush(int num
, int dir
)
364 int n
= hw_ep_bit(num
, dir
);
367 /* flush any pending transfer */
368 hw_cwrite(CAP_ENDPTFLUSH
, BIT(n
), BIT(n
));
369 while (hw_cread(CAP_ENDPTFLUSH
, BIT(n
)))
371 } while (hw_cread(CAP_ENDPTSTAT
, BIT(n
)));
377 * hw_ep_disable: disables endpoint (execute without interruption)
378 * @num: endpoint number
379 * @dir: endpoint direction
381 * This function returns an error code
383 static int hw_ep_disable(int num
, int dir
)
385 hw_ep_flush(num
, dir
);
386 hw_cwrite(CAP_ENDPTCTRL
+ num
* sizeof(u32
),
387 dir
? ENDPTCTRL_TXE
: ENDPTCTRL_RXE
, 0);
392 * hw_ep_enable: enables endpoint (execute without interruption)
393 * @num: endpoint number
394 * @dir: endpoint direction
395 * @type: endpoint type
397 * This function returns an error code
399 static int hw_ep_enable(int num
, int dir
, int type
)
404 mask
= ENDPTCTRL_TXT
; /* type */
405 data
= type
<< ffs_nr(mask
);
407 mask
|= ENDPTCTRL_TXS
; /* unstall */
408 mask
|= ENDPTCTRL_TXR
; /* reset data toggle */
409 data
|= ENDPTCTRL_TXR
;
410 mask
|= ENDPTCTRL_TXE
; /* enable */
411 data
|= ENDPTCTRL_TXE
;
413 mask
= ENDPTCTRL_RXT
; /* type */
414 data
= type
<< ffs_nr(mask
);
416 mask
|= ENDPTCTRL_RXS
; /* unstall */
417 mask
|= ENDPTCTRL_RXR
; /* reset data toggle */
418 data
|= ENDPTCTRL_RXR
;
419 mask
|= ENDPTCTRL_RXE
; /* enable */
420 data
|= ENDPTCTRL_RXE
;
422 hw_cwrite(CAP_ENDPTCTRL
+ num
* sizeof(u32
), mask
, data
);
427 * hw_ep_get_halt: return endpoint halt status
428 * @num: endpoint number
429 * @dir: endpoint direction
431 * This function returns 1 if endpoint halted
433 static int hw_ep_get_halt(int num
, int dir
)
435 u32 mask
= dir
? ENDPTCTRL_TXS
: ENDPTCTRL_RXS
;
437 return hw_cread(CAP_ENDPTCTRL
+ num
* sizeof(u32
), mask
) ? 1 : 0;
441 * hw_test_and_clear_setup_status: test & clear setup status (execute without
443 * @n: bit number (endpoint)
445 * This function returns setup status
447 static int hw_test_and_clear_setup_status(int n
)
449 return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT
, BIT(n
));
453 * hw_ep_prime: primes endpoint (execute without interruption)
454 * @num: endpoint number
455 * @dir: endpoint direction
456 * @is_ctrl: true if control endpoint
458 * This function returns an error code
460 static int hw_ep_prime(int num
, int dir
, int is_ctrl
)
462 int n
= hw_ep_bit(num
, dir
);
464 if (is_ctrl
&& dir
== RX
&& hw_cread(CAP_ENDPTSETUPSTAT
, BIT(num
)))
467 hw_cwrite(CAP_ENDPTPRIME
, BIT(n
), BIT(n
));
469 while (hw_cread(CAP_ENDPTPRIME
, BIT(n
)))
471 if (is_ctrl
&& dir
== RX
&& hw_cread(CAP_ENDPTSETUPSTAT
, BIT(num
)))
474 /* status shoult be tested according with manual but it doesn't work */
479 * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
480 * without interruption)
481 * @num: endpoint number
482 * @dir: endpoint direction
483 * @value: true => stall, false => unstall
485 * This function returns an error code
487 static int hw_ep_set_halt(int num
, int dir
, int value
)
489 if (value
!= 0 && value
!= 1)
493 u32 addr
= CAP_ENDPTCTRL
+ num
* sizeof(u32
);
494 u32 mask_xs
= dir
? ENDPTCTRL_TXS
: ENDPTCTRL_RXS
;
495 u32 mask_xr
= dir
? ENDPTCTRL_TXR
: ENDPTCTRL_RXR
;
497 /* data toggle - reserved for EP0 but it's in ESS */
498 hw_cwrite(addr
, mask_xs
|mask_xr
, value
? mask_xs
: mask_xr
);
500 } while (value
!= hw_ep_get_halt(num
, dir
));
506 * hw_intr_clear: disables interrupt & clears interrupt status (execute without
510 * This function returns an error code
512 static int hw_intr_clear(int n
)
517 hw_cwrite(CAP_USBINTR
, BIT(n
), 0);
518 hw_cwrite(CAP_USBSTS
, BIT(n
), BIT(n
));
523 * hw_intr_force: enables interrupt & forces interrupt status (execute without
527 * This function returns an error code
529 static int hw_intr_force(int n
)
534 hw_awrite(ABS_TESTMODE
, TESTMODE_FORCE
, TESTMODE_FORCE
);
535 hw_cwrite(CAP_USBINTR
, BIT(n
), BIT(n
));
536 hw_cwrite(CAP_USBSTS
, BIT(n
), BIT(n
));
537 hw_awrite(ABS_TESTMODE
, TESTMODE_FORCE
, 0);
542 * hw_is_port_high_speed: test if port is high speed
544 * This function returns true if high speed port
546 static int hw_port_is_high_speed(void)
548 return hw_bank
.lpm
? hw_cread(CAP_DEVLC
, DEVLC_PSPD
) :
549 hw_cread(CAP_PORTSC
, PORTSC_HSP
);
553 * hw_port_test_get: reads port test mode value
555 * This function returns port test mode value
557 static u8
hw_port_test_get(void)
559 return hw_cread(CAP_PORTSC
, PORTSC_PTC
) >> ffs_nr(PORTSC_PTC
);
563 * hw_port_test_set: writes port test mode (execute without interruption)
566 * This function returns an error code
568 static int hw_port_test_set(u8 mode
)
570 const u8 TEST_MODE_MAX
= 7;
572 if (mode
> TEST_MODE_MAX
)
575 hw_cwrite(CAP_PORTSC
, PORTSC_PTC
, mode
<< ffs_nr(PORTSC_PTC
));
580 * hw_read_intr_enable: returns interrupt enable register
582 * This function returns register data
584 static u32
hw_read_intr_enable(void)
586 return hw_cread(CAP_USBINTR
, ~0);
590 * hw_read_intr_status: returns interrupt status register
592 * This function returns register data
594 static u32
hw_read_intr_status(void)
596 return hw_cread(CAP_USBSTS
, ~0);
600 * hw_register_read: reads all device registers (execute without interruption)
601 * @buf: destination buffer
604 * This function returns number of registers read
606 static size_t hw_register_read(u32
*buf
, size_t size
)
610 if (size
> hw_bank
.size
)
613 for (i
= 0; i
< size
; i
++)
614 buf
[i
] = hw_aread(i
* sizeof(u32
), ~0);
620 * hw_register_write: writes to register
621 * @addr: register address
622 * @data: register value
624 * This function returns an error code
626 static int hw_register_write(u16 addr
, u32 data
)
631 if (addr
>= hw_bank
.size
)
637 hw_awrite(addr
, ~0, data
);
642 * hw_test_and_clear_complete: test & clear complete status (execute without
644 * @n: bit number (endpoint)
646 * This function returns complete status
648 static int hw_test_and_clear_complete(int n
)
650 return hw_ctest_and_clear(CAP_ENDPTCOMPLETE
, BIT(n
));
654 * hw_test_and_clear_intr_active: test & clear active interrupts (execute
655 * without interruption)
657 * This function returns active interrutps
659 static u32
hw_test_and_clear_intr_active(void)
661 u32 reg
= hw_read_intr_status() & hw_read_intr_enable();
663 hw_cwrite(CAP_USBSTS
, ~0, reg
);
668 * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
671 * This function returns guard value
673 static int hw_test_and_clear_setup_guard(void)
675 return hw_ctest_and_write(CAP_USBCMD
, USBCMD_SUTW
, 0);
679 * hw_test_and_set_setup_guard: test & set setup guard (execute without
682 * This function returns guard value
684 static int hw_test_and_set_setup_guard(void)
686 return hw_ctest_and_write(CAP_USBCMD
, USBCMD_SUTW
, USBCMD_SUTW
);
690 * hw_usb_set_address: configures USB address (execute without interruption)
691 * @value: new USB address
693 * This function returns an error code
695 static int hw_usb_set_address(u8 value
)
698 hw_cwrite(CAP_DEVICEADDR
, DEVICEADDR_USBADR
| DEVICEADDR_USBADRA
,
699 value
<< ffs_nr(DEVICEADDR_USBADR
) | DEVICEADDR_USBADRA
);
704 * hw_usb_reset: restart device after a bus reset (execute without
707 * This function returns an error code
709 static int hw_usb_reset(void)
711 hw_usb_set_address(0);
713 /* ESS flushes only at end?!? */
714 hw_cwrite(CAP_ENDPTFLUSH
, ~0, ~0); /* flush all EPs */
716 /* clear setup token semaphores */
717 hw_cwrite(CAP_ENDPTSETUPSTAT
, 0, 0); /* writes its content */
719 /* clear complete status */
720 hw_cwrite(CAP_ENDPTCOMPLETE
, 0, 0); /* writes its content */
722 /* wait until all bits cleared */
723 while (hw_cread(CAP_ENDPTPRIME
, ~0))
724 udelay(10); /* not RTOS friendly */
726 /* reset all endpoints ? */
728 /* reset internal status and wait for further instructions
729 no need to verify the port reset status (ESS does it) */
734 /******************************************************************************
736 *****************************************************************************/
738 * show_device: prints information about device capabilities and status
740 * Check "device.h" for details
742 static ssize_t
show_device(struct device
*dev
, struct device_attribute
*attr
,
745 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
746 struct usb_gadget
*gadget
= &udc
->gadget
;
749 dbg_trace("[%s] %p\n", __func__
, buf
);
750 if (attr
== NULL
|| buf
== NULL
) {
751 dev_err(dev
, "[%s] EINVAL\n", __func__
);
755 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "speed = %d\n",
757 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "is_dualspeed = %d\n",
758 gadget
->is_dualspeed
);
759 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "is_otg = %d\n",
761 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "is_a_peripheral = %d\n",
762 gadget
->is_a_peripheral
);
763 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "b_hnp_enable = %d\n",
764 gadget
->b_hnp_enable
);
765 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "a_hnp_support = %d\n",
766 gadget
->a_hnp_support
);
767 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "a_alt_hnp_support = %d\n",
768 gadget
->a_alt_hnp_support
);
769 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "name = %s\n",
770 (gadget
->name
? gadget
->name
: ""));
774 static DEVICE_ATTR(device
, S_IRUSR
, show_device
, NULL
);
777 * show_driver: prints information about attached gadget (if any)
779 * Check "device.h" for details
781 static ssize_t
show_driver(struct device
*dev
, struct device_attribute
*attr
,
784 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
785 struct usb_gadget_driver
*driver
= udc
->driver
;
788 dbg_trace("[%s] %p\n", __func__
, buf
);
789 if (attr
== NULL
|| buf
== NULL
) {
790 dev_err(dev
, "[%s] EINVAL\n", __func__
);
795 return scnprintf(buf
, PAGE_SIZE
,
796 "There is no gadget attached!\n");
798 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "function = %s\n",
799 (driver
->function
? driver
->function
: ""));
800 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "max speed = %d\n",
805 static DEVICE_ATTR(driver
, S_IRUSR
, show_driver
, NULL
);
807 /* Maximum event message length */
808 #define DBG_DATA_MSG 64UL
810 /* Maximum event messages */
811 #define DBG_DATA_MAX 128UL
813 /* Event buffer descriptor */
815 char (buf
[DBG_DATA_MAX
])[DBG_DATA_MSG
]; /* buffer */
816 unsigned idx
; /* index */
817 unsigned tty
; /* print to console? */
818 rwlock_t lck
; /* lock */
822 .lck
= __RW_LOCK_UNLOCKED(lck
)
826 * dbg_dec: decrements debug event index
829 static void dbg_dec(unsigned *idx
)
831 *idx
= (*idx
- 1) & (DBG_DATA_MAX
-1);
835 * dbg_inc: increments debug event index
838 static void dbg_inc(unsigned *idx
)
840 *idx
= (*idx
+ 1) & (DBG_DATA_MAX
-1);
844 * dbg_print: prints the common part of the event
845 * @addr: endpoint address
848 * @extra: extra information
850 static void dbg_print(u8 addr
, const char *name
, int status
, const char *extra
)
856 write_lock_irqsave(&dbg_data
.lck
, flags
);
858 do_gettimeofday(&tval
);
859 stamp
= tval
.tv_sec
& 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s */
860 stamp
= stamp
* 1000000 + tval
.tv_usec
;
862 scnprintf(dbg_data
.buf
[dbg_data
.idx
], DBG_DATA_MSG
,
863 "%04X\t? %02X %-7.7s %4i ?\t%s\n",
864 stamp
, addr
, name
, status
, extra
);
866 dbg_inc(&dbg_data
.idx
);
868 write_unlock_irqrestore(&dbg_data
.lck
, flags
);
870 if (dbg_data
.tty
!= 0)
871 pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n",
872 stamp
, addr
, name
, status
, extra
);
876 * dbg_done: prints a DONE event
877 * @addr: endpoint address
878 * @td: transfer descriptor
881 static void dbg_done(u8 addr
, const u32 token
, int status
)
883 char msg
[DBG_DATA_MSG
];
885 scnprintf(msg
, sizeof(msg
), "%d %02X",
886 (int)(token
& TD_TOTAL_BYTES
) >> ffs_nr(TD_TOTAL_BYTES
),
887 (int)(token
& TD_STATUS
) >> ffs_nr(TD_STATUS
));
888 dbg_print(addr
, "DONE", status
, msg
);
892 * dbg_event: prints a generic event
893 * @addr: endpoint address
897 static void dbg_event(u8 addr
, const char *name
, int status
)
900 dbg_print(addr
, name
, status
, "");
904 * dbg_queue: prints a QUEUE event
905 * @addr: endpoint address
909 static void dbg_queue(u8 addr
, const struct usb_request
*req
, int status
)
911 char msg
[DBG_DATA_MSG
];
914 scnprintf(msg
, sizeof(msg
),
915 "%d %d", !req
->no_interrupt
, req
->length
);
916 dbg_print(addr
, "QUEUE", status
, msg
);
921 * dbg_setup: prints a SETUP event
922 * @addr: endpoint address
923 * @req: setup request
925 static void dbg_setup(u8 addr
, const struct usb_ctrlrequest
*req
)
927 char msg
[DBG_DATA_MSG
];
930 scnprintf(msg
, sizeof(msg
),
931 "%02X %02X %04X %04X %d", req
->bRequestType
,
932 req
->bRequest
, le16_to_cpu(req
->wValue
),
933 le16_to_cpu(req
->wIndex
), le16_to_cpu(req
->wLength
));
934 dbg_print(addr
, "SETUP", 0, msg
);
939 * show_events: displays the event buffer
941 * Check "device.h" for details
943 static ssize_t
show_events(struct device
*dev
, struct device_attribute
*attr
,
947 unsigned i
, j
, n
= 0;
949 dbg_trace("[%s] %p\n", __func__
, buf
);
950 if (attr
== NULL
|| buf
== NULL
) {
951 dev_err(dev
, "[%s] EINVAL\n", __func__
);
955 read_lock_irqsave(&dbg_data
.lck
, flags
);
958 for (dbg_dec(&i
); i
!= dbg_data
.idx
; dbg_dec(&i
)) {
959 n
+= strlen(dbg_data
.buf
[i
]);
960 if (n
>= PAGE_SIZE
) {
961 n
-= strlen(dbg_data
.buf
[i
]);
965 for (j
= 0, dbg_inc(&i
); j
< n
; dbg_inc(&i
))
966 j
+= scnprintf(buf
+ j
, PAGE_SIZE
- j
,
967 "%s", dbg_data
.buf
[i
]);
969 read_unlock_irqrestore(&dbg_data
.lck
, flags
);
975 * store_events: configure if events are going to be also printed to console
977 * Check "device.h" for details
979 static ssize_t
store_events(struct device
*dev
, struct device_attribute
*attr
,
980 const char *buf
, size_t count
)
984 dbg_trace("[%s] %p, %d\n", __func__
, buf
, count
);
985 if (attr
== NULL
|| buf
== NULL
) {
986 dev_err(dev
, "[%s] EINVAL\n", __func__
);
990 if (sscanf(buf
, "%u", &tty
) != 1 || tty
> 1) {
991 dev_err(dev
, "<1|0>: enable|disable console log\n");
996 dev_info(dev
, "tty = %u", dbg_data
.tty
);
1001 static DEVICE_ATTR(events
, S_IRUSR
| S_IWUSR
, show_events
, store_events
);
1004 * show_inters: interrupt status, enable status and historic
1006 * Check "device.h" for details
1008 static ssize_t
show_inters(struct device
*dev
, struct device_attribute
*attr
,
1011 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1012 unsigned long flags
;
1014 unsigned i
, j
, n
= 0;
1016 dbg_trace("[%s] %p\n", __func__
, buf
);
1017 if (attr
== NULL
|| buf
== NULL
) {
1018 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1022 spin_lock_irqsave(udc
->lock
, flags
);
1024 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1025 "status = %08x\n", hw_read_intr_status());
1026 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1027 "enable = %08x\n", hw_read_intr_enable());
1029 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "*test = %d\n",
1030 isr_statistics
.test
);
1031 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? ui = %d\n",
1033 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? uei = %d\n",
1034 isr_statistics
.uei
);
1035 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? pci = %d\n",
1036 isr_statistics
.pci
);
1037 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? uri = %d\n",
1038 isr_statistics
.uri
);
1039 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? sli = %d\n",
1040 isr_statistics
.sli
);
1041 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "*none = %d\n",
1042 isr_statistics
.none
);
1043 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "*hndl = %d\n",
1044 isr_statistics
.hndl
.cnt
);
1046 for (i
= isr_statistics
.hndl
.idx
, j
= 0; j
<= ISR_MASK
; j
++, i
++) {
1048 intr
= isr_statistics
.hndl
.buf
[i
];
1051 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "ui ");
1053 if (USBi_UEI
& intr
)
1054 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "uei ");
1056 if (USBi_PCI
& intr
)
1057 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "pci ");
1059 if (USBi_URI
& intr
)
1060 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "uri ");
1062 if (USBi_SLI
& intr
)
1063 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "sli ");
1066 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "??? ");
1067 if (isr_statistics
.hndl
.buf
[i
])
1068 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "\n");
1071 spin_unlock_irqrestore(udc
->lock
, flags
);
1077 * store_inters: enable & force or disable an individual interrutps
1078 * (to be used for test purposes only)
1080 * Check "device.h" for details
1082 static ssize_t
store_inters(struct device
*dev
, struct device_attribute
*attr
,
1083 const char *buf
, size_t count
)
1085 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1086 unsigned long flags
;
1089 dbg_trace("[%s] %p, %d\n", __func__
, buf
, count
);
1090 if (attr
== NULL
|| buf
== NULL
) {
1091 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1095 if (sscanf(buf
, "%u %u", &en
, &bit
) != 2 || en
> 1) {
1096 dev_err(dev
, "<1|0> <bit>: enable|disable interrupt");
1100 spin_lock_irqsave(udc
->lock
, flags
);
1102 if (hw_intr_force(bit
))
1103 dev_err(dev
, "invalid bit number\n");
1105 isr_statistics
.test
++;
1107 if (hw_intr_clear(bit
))
1108 dev_err(dev
, "invalid bit number\n");
1110 spin_unlock_irqrestore(udc
->lock
, flags
);
1115 static DEVICE_ATTR(inters
, S_IRUSR
| S_IWUSR
, show_inters
, store_inters
);
1118 * show_port_test: reads port test mode
1120 * Check "device.h" for details
1122 static ssize_t
show_port_test(struct device
*dev
,
1123 struct device_attribute
*attr
, char *buf
)
1125 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1126 unsigned long flags
;
1129 dbg_trace("[%s] %p\n", __func__
, buf
);
1130 if (attr
== NULL
|| buf
== NULL
) {
1131 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1135 spin_lock_irqsave(udc
->lock
, flags
);
1136 mode
= hw_port_test_get();
1137 spin_unlock_irqrestore(udc
->lock
, flags
);
1139 return scnprintf(buf
, PAGE_SIZE
, "mode = %u\n", mode
);
1143 * store_port_test: writes port test mode
1145 * Check "device.h" for details
1147 static ssize_t
store_port_test(struct device
*dev
,
1148 struct device_attribute
*attr
,
1149 const char *buf
, size_t count
)
1151 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1152 unsigned long flags
;
1155 dbg_trace("[%s] %p, %d\n", __func__
, buf
, count
);
1156 if (attr
== NULL
|| buf
== NULL
) {
1157 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1161 if (sscanf(buf
, "%u", &mode
) != 1) {
1162 dev_err(dev
, "<mode>: set port test mode");
1166 spin_lock_irqsave(udc
->lock
, flags
);
1167 if (hw_port_test_set(mode
))
1168 dev_err(dev
, "invalid mode\n");
1169 spin_unlock_irqrestore(udc
->lock
, flags
);
1174 static DEVICE_ATTR(port_test
, S_IRUSR
| S_IWUSR
,
1175 show_port_test
, store_port_test
);
1178 * show_qheads: DMA contents of all queue heads
1180 * Check "device.h" for details
1182 static ssize_t
show_qheads(struct device
*dev
, struct device_attribute
*attr
,
1185 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1186 unsigned long flags
;
1187 unsigned i
, j
, n
= 0;
1189 dbg_trace("[%s] %p\n", __func__
, buf
);
1190 if (attr
== NULL
|| buf
== NULL
) {
1191 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1195 spin_lock_irqsave(udc
->lock
, flags
);
1196 for (i
= 0; i
< hw_ep_max
/2; i
++) {
1197 struct ci13xxx_ep
*mEpRx
= &udc
->ci13xxx_ep
[i
];
1198 struct ci13xxx_ep
*mEpTx
= &udc
->ci13xxx_ep
[i
+ hw_ep_max
/2];
1199 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1200 "EP=%02i: RX=%08X TX=%08X\n",
1201 i
, (u32
)mEpRx
->qh
.dma
, (u32
)mEpTx
->qh
.dma
);
1202 for (j
= 0; j
< (sizeof(struct ci13xxx_qh
)/sizeof(u32
)); j
++) {
1203 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1204 " %04X: %08X %08X\n", j
,
1205 *((u32
*)mEpRx
->qh
.ptr
+ j
),
1206 *((u32
*)mEpTx
->qh
.ptr
+ j
));
1209 spin_unlock_irqrestore(udc
->lock
, flags
);
1213 static DEVICE_ATTR(qheads
, S_IRUSR
, show_qheads
, NULL
);
1216 * show_registers: dumps all registers
1218 * Check "device.h" for details
1220 #define DUMP_ENTRIES 512
1221 static ssize_t
show_registers(struct device
*dev
,
1222 struct device_attribute
*attr
, char *buf
)
1224 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1225 unsigned long flags
;
1227 unsigned i
, k
, n
= 0;
1229 dbg_trace("[%s] %p\n", __func__
, buf
);
1230 if (attr
== NULL
|| buf
== NULL
) {
1231 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1235 dump
= kmalloc(sizeof(u32
) * DUMP_ENTRIES
, GFP_KERNEL
);
1237 dev_err(dev
, "%s: out of memory\n", __func__
);
1241 spin_lock_irqsave(udc
->lock
, flags
);
1242 k
= hw_register_read(dump
, DUMP_ENTRIES
);
1243 spin_unlock_irqrestore(udc
->lock
, flags
);
1245 for (i
= 0; i
< k
; i
++) {
1246 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1247 "reg[0x%04X] = 0x%08X\n",
1248 i
* (unsigned)sizeof(u32
), dump
[i
]);
1256 * store_registers: writes value to register address
1258 * Check "device.h" for details
1260 static ssize_t
store_registers(struct device
*dev
,
1261 struct device_attribute
*attr
,
1262 const char *buf
, size_t count
)
1264 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1265 unsigned long addr
, data
, flags
;
1267 dbg_trace("[%s] %p, %d\n", __func__
, buf
, count
);
1268 if (attr
== NULL
|| buf
== NULL
) {
1269 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1273 if (sscanf(buf
, "%li %li", &addr
, &data
) != 2) {
1274 dev_err(dev
, "<addr> <data>: write data to register address");
1278 spin_lock_irqsave(udc
->lock
, flags
);
1279 if (hw_register_write(addr
, data
))
1280 dev_err(dev
, "invalid address range\n");
1281 spin_unlock_irqrestore(udc
->lock
, flags
);
1286 static DEVICE_ATTR(registers
, S_IRUSR
| S_IWUSR
,
1287 show_registers
, store_registers
);
1290 * show_requests: DMA contents of all requests currently queued (all endpts)
1292 * Check "device.h" for details
1294 static ssize_t
show_requests(struct device
*dev
, struct device_attribute
*attr
,
1297 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1298 unsigned long flags
;
1299 struct list_head
*ptr
= NULL
;
1300 struct ci13xxx_req
*req
= NULL
;
1301 unsigned i
, j
, n
= 0, qSize
= sizeof(struct ci13xxx_td
)/sizeof(u32
);
1303 dbg_trace("[%s] %p\n", __func__
, buf
);
1304 if (attr
== NULL
|| buf
== NULL
) {
1305 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1309 spin_lock_irqsave(udc
->lock
, flags
);
1310 for (i
= 0; i
< hw_ep_max
; i
++)
1311 list_for_each(ptr
, &udc
->ci13xxx_ep
[i
].qh
.queue
)
1313 req
= list_entry(ptr
, struct ci13xxx_req
, queue
);
1315 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1316 "EP=%02i: TD=%08X %s\n",
1317 i
% hw_ep_max
/2, (u32
)req
->dma
,
1318 ((i
< hw_ep_max
/2) ? "RX" : "TX"));
1320 for (j
= 0; j
< qSize
; j
++)
1321 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1323 *((u32
*)req
->ptr
+ j
));
1325 spin_unlock_irqrestore(udc
->lock
, flags
);
1329 static DEVICE_ATTR(requests
, S_IRUSR
, show_requests
, NULL
);
1332 * dbg_create_files: initializes the attribute interface
1335 * This function returns an error code
1337 __maybe_unused
static int dbg_create_files(struct device
*dev
)
1343 retval
= device_create_file(dev
, &dev_attr_device
);
1346 retval
= device_create_file(dev
, &dev_attr_driver
);
1349 retval
= device_create_file(dev
, &dev_attr_events
);
1352 retval
= device_create_file(dev
, &dev_attr_inters
);
1355 retval
= device_create_file(dev
, &dev_attr_port_test
);
1358 retval
= device_create_file(dev
, &dev_attr_qheads
);
1361 retval
= device_create_file(dev
, &dev_attr_registers
);
1364 retval
= device_create_file(dev
, &dev_attr_requests
);
1370 device_remove_file(dev
, &dev_attr_registers
);
1372 device_remove_file(dev
, &dev_attr_qheads
);
1374 device_remove_file(dev
, &dev_attr_port_test
);
1376 device_remove_file(dev
, &dev_attr_inters
);
1378 device_remove_file(dev
, &dev_attr_events
);
1380 device_remove_file(dev
, &dev_attr_driver
);
1382 device_remove_file(dev
, &dev_attr_device
);
1388 * dbg_remove_files: destroys the attribute interface
1391 * This function returns an error code
1393 __maybe_unused
static int dbg_remove_files(struct device
*dev
)
1397 device_remove_file(dev
, &dev_attr_requests
);
1398 device_remove_file(dev
, &dev_attr_registers
);
1399 device_remove_file(dev
, &dev_attr_qheads
);
1400 device_remove_file(dev
, &dev_attr_port_test
);
1401 device_remove_file(dev
, &dev_attr_inters
);
1402 device_remove_file(dev
, &dev_attr_events
);
1403 device_remove_file(dev
, &dev_attr_driver
);
1404 device_remove_file(dev
, &dev_attr_device
);
1408 /******************************************************************************
1410 *****************************************************************************/
1412 * _usb_addr: calculates endpoint address from direction & number
1415 static inline u8
_usb_addr(struct ci13xxx_ep
*ep
)
1417 return ((ep
->dir
== TX
) ? USB_ENDPOINT_DIR_MASK
: 0) | ep
->num
;
1421 * _hardware_queue: configures a request at hardware level
1425 * This function returns an error code
1427 static int _hardware_enqueue(struct ci13xxx_ep
*mEp
, struct ci13xxx_req
*mReq
)
1431 unsigned length
= mReq
->req
.length
;
1433 trace("%p, %p", mEp
, mReq
);
1435 /* don't queue twice */
1436 if (mReq
->req
.status
== -EALREADY
)
1439 mReq
->req
.status
= -EALREADY
;
1440 if (length
&& mReq
->req
.dma
== DMA_ADDR_INVALID
) {
1442 dma_map_single(mEp
->device
, mReq
->req
.buf
,
1443 length
, mEp
->dir
? DMA_TO_DEVICE
:
1445 if (mReq
->req
.dma
== 0)
1451 if (mReq
->req
.zero
&& length
&& (length
% mEp
->ep
.maxpacket
== 0)) {
1452 mReq
->zptr
= dma_pool_alloc(mEp
->td_pool
, GFP_ATOMIC
,
1454 if (mReq
->zptr
== NULL
) {
1456 dma_unmap_single(mEp
->device
, mReq
->req
.dma
,
1457 length
, mEp
->dir
? DMA_TO_DEVICE
:
1459 mReq
->req
.dma
= DMA_ADDR_INVALID
;
1464 memset(mReq
->zptr
, 0, sizeof(*mReq
->zptr
));
1465 mReq
->zptr
->next
= TD_TERMINATE
;
1466 mReq
->zptr
->token
= TD_STATUS_ACTIVE
;
1467 if (!mReq
->req
.no_interrupt
)
1468 mReq
->zptr
->token
|= TD_IOC
;
1472 * TODO - handle requests which spawns into several TDs
1474 memset(mReq
->ptr
, 0, sizeof(*mReq
->ptr
));
1475 mReq
->ptr
->token
= length
<< ffs_nr(TD_TOTAL_BYTES
);
1476 mReq
->ptr
->token
&= TD_TOTAL_BYTES
;
1477 mReq
->ptr
->token
|= TD_STATUS_ACTIVE
;
1479 mReq
->ptr
->next
= mReq
->zdma
;
1481 mReq
->ptr
->next
= TD_TERMINATE
;
1482 if (!mReq
->req
.no_interrupt
)
1483 mReq
->ptr
->token
|= TD_IOC
;
1485 mReq
->ptr
->page
[0] = mReq
->req
.dma
;
1486 for (i
= 1; i
< 5; i
++)
1487 mReq
->ptr
->page
[i
] =
1488 (mReq
->req
.dma
+ i
* CI13XXX_PAGE_SIZE
) & ~TD_RESERVED_MASK
;
1490 if (!list_empty(&mEp
->qh
.queue
)) {
1491 struct ci13xxx_req
*mReqPrev
;
1492 int n
= hw_ep_bit(mEp
->num
, mEp
->dir
);
1495 mReqPrev
= list_entry(mEp
->qh
.queue
.prev
,
1496 struct ci13xxx_req
, queue
);
1498 mReqPrev
->zptr
->next
= mReq
->dma
& TD_ADDR_MASK
;
1500 mReqPrev
->ptr
->next
= mReq
->dma
& TD_ADDR_MASK
;
1502 if (hw_cread(CAP_ENDPTPRIME
, BIT(n
)))
1505 hw_cwrite(CAP_USBCMD
, USBCMD_ATDTW
, USBCMD_ATDTW
);
1506 tmp_stat
= hw_cread(CAP_ENDPTSTAT
, BIT(n
));
1507 } while (!hw_cread(CAP_USBCMD
, USBCMD_ATDTW
));
1508 hw_cwrite(CAP_USBCMD
, USBCMD_ATDTW
, 0);
1513 /* QH configuration */
1514 mEp
->qh
.ptr
->td
.next
= mReq
->dma
; /* TERMINATE = 0 */
1515 mEp
->qh
.ptr
->td
.token
&= ~TD_STATUS
; /* clear status */
1516 mEp
->qh
.ptr
->cap
|= QH_ZLT
;
1518 wmb(); /* synchronize before ep prime */
1520 ret
= hw_ep_prime(mEp
->num
, mEp
->dir
,
1521 mEp
->type
== USB_ENDPOINT_XFER_CONTROL
);
1527 * _hardware_dequeue: handles a request at hardware level
1531 * This function returns an error code
1533 static int _hardware_dequeue(struct ci13xxx_ep
*mEp
, struct ci13xxx_req
*mReq
)
1535 trace("%p, %p", mEp
, mReq
);
1537 if (mReq
->req
.status
!= -EALREADY
)
1540 if ((TD_STATUS_ACTIVE
& mReq
->ptr
->token
) != 0)
1544 if ((TD_STATUS_ACTIVE
& mReq
->zptr
->token
) != 0)
1546 dma_pool_free(mEp
->td_pool
, mReq
->zptr
, mReq
->zdma
);
1550 mReq
->req
.status
= 0;
1553 dma_unmap_single(mEp
->device
, mReq
->req
.dma
, mReq
->req
.length
,
1554 mEp
->dir
? DMA_TO_DEVICE
: DMA_FROM_DEVICE
);
1555 mReq
->req
.dma
= DMA_ADDR_INVALID
;
1559 mReq
->req
.status
= mReq
->ptr
->token
& TD_STATUS
;
1560 if ((TD_STATUS_HALTED
& mReq
->req
.status
) != 0)
1561 mReq
->req
.status
= -1;
1562 else if ((TD_STATUS_DT_ERR
& mReq
->req
.status
) != 0)
1563 mReq
->req
.status
= -1;
1564 else if ((TD_STATUS_TR_ERR
& mReq
->req
.status
) != 0)
1565 mReq
->req
.status
= -1;
1567 mReq
->req
.actual
= mReq
->ptr
->token
& TD_TOTAL_BYTES
;
1568 mReq
->req
.actual
>>= ffs_nr(TD_TOTAL_BYTES
);
1569 mReq
->req
.actual
= mReq
->req
.length
- mReq
->req
.actual
;
1570 mReq
->req
.actual
= mReq
->req
.status
? 0 : mReq
->req
.actual
;
1572 return mReq
->req
.actual
;
1576 * _ep_nuke: dequeues all endpoint requests
1579 * This function returns an error code
1580 * Caller must hold lock
1582 static int _ep_nuke(struct ci13xxx_ep
*mEp
)
1583 __releases(mEp
->lock
)
1584 __acquires(mEp
->lock
)
1591 hw_ep_flush(mEp
->num
, mEp
->dir
);
1593 while (!list_empty(&mEp
->qh
.queue
)) {
1595 /* pop oldest request */
1596 struct ci13xxx_req
*mReq
= \
1597 list_entry(mEp
->qh
.queue
.next
,
1598 struct ci13xxx_req
, queue
);
1599 list_del_init(&mReq
->queue
);
1600 mReq
->req
.status
= -ESHUTDOWN
;
1602 if (mReq
->req
.complete
!= NULL
) {
1603 spin_unlock(mEp
->lock
);
1604 mReq
->req
.complete(&mEp
->ep
, &mReq
->req
);
1605 spin_lock(mEp
->lock
);
1612 * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
1615 * This function returns an error code
1617 static int _gadget_stop_activity(struct usb_gadget
*gadget
)
1620 struct ci13xxx
*udc
= container_of(gadget
, struct ci13xxx
, gadget
);
1621 unsigned long flags
;
1623 trace("%p", gadget
);
1628 spin_lock_irqsave(udc
->lock
, flags
);
1629 udc
->gadget
.speed
= USB_SPEED_UNKNOWN
;
1630 udc
->remote_wakeup
= 0;
1632 spin_unlock_irqrestore(udc
->lock
, flags
);
1634 /* flush all endpoints */
1635 gadget_for_each_ep(ep
, gadget
) {
1636 usb_ep_fifo_flush(ep
);
1638 usb_ep_fifo_flush(&udc
->ep0out
.ep
);
1639 usb_ep_fifo_flush(&udc
->ep0in
.ep
);
1641 udc
->driver
->disconnect(gadget
);
1643 /* make sure to disable all endpoints */
1644 gadget_for_each_ep(ep
, gadget
) {
1648 if (udc
->status
!= NULL
) {
1649 usb_ep_free_request(&udc
->ep0in
.ep
, udc
->status
);
1656 /******************************************************************************
1658 *****************************************************************************/
1660 * isr_reset_handler: USB reset interrupt handler
1663 * This function resets USB engine after a bus reset occurred
1665 static void isr_reset_handler(struct ci13xxx
*udc
)
1666 __releases(udc
->lock
)
1667 __acquires(udc
->lock
)
1678 dbg_event(0xFF, "BUS RST", 0);
1680 spin_unlock(udc
->lock
);
1681 retval
= _gadget_stop_activity(&udc
->gadget
);
1685 retval
= hw_usb_reset();
1689 udc
->status
= usb_ep_alloc_request(&udc
->ep0in
.ep
, GFP_ATOMIC
);
1690 if (udc
->status
== NULL
)
1693 spin_lock(udc
->lock
);
1697 err("error: %i", retval
);
1701 * isr_get_status_complete: get_status request complete function
1703 * @req: request handled
1705 * Caller must release lock
1707 static void isr_get_status_complete(struct usb_ep
*ep
, struct usb_request
*req
)
1709 trace("%p, %p", ep
, req
);
1711 if (ep
== NULL
|| req
== NULL
) {
1717 usb_ep_free_request(ep
, req
);
1721 * isr_get_status_response: get_status request response
1723 * @setup: setup request packet
1725 * This function returns an error code
1727 static int isr_get_status_response(struct ci13xxx
*udc
,
1728 struct usb_ctrlrequest
*setup
)
1729 __releases(mEp
->lock
)
1730 __acquires(mEp
->lock
)
1732 struct ci13xxx_ep
*mEp
= &udc
->ep0in
;
1733 struct usb_request
*req
= NULL
;
1734 gfp_t gfp_flags
= GFP_ATOMIC
;
1735 int dir
, num
, retval
;
1737 trace("%p, %p", mEp
, setup
);
1739 if (mEp
== NULL
|| setup
== NULL
)
1742 spin_unlock(mEp
->lock
);
1743 req
= usb_ep_alloc_request(&mEp
->ep
, gfp_flags
);
1744 spin_lock(mEp
->lock
);
1748 req
->complete
= isr_get_status_complete
;
1750 req
->buf
= kzalloc(req
->length
, gfp_flags
);
1751 if (req
->buf
== NULL
) {
1756 if ((setup
->bRequestType
& USB_RECIP_MASK
) == USB_RECIP_DEVICE
) {
1757 /* Assume that device is bus powered for now. */
1758 *((u16
*)req
->buf
) = _udc
->remote_wakeup
<< 1;
1760 } else if ((setup
->bRequestType
& USB_RECIP_MASK
) \
1761 == USB_RECIP_ENDPOINT
) {
1762 dir
= (le16_to_cpu(setup
->wIndex
) & USB_ENDPOINT_DIR_MASK
) ?
1764 num
= le16_to_cpu(setup
->wIndex
) & USB_ENDPOINT_NUMBER_MASK
;
1765 *((u16
*)req
->buf
) = hw_ep_get_halt(num
, dir
);
1767 /* else do nothing; reserved for future use */
1769 spin_unlock(mEp
->lock
);
1770 retval
= usb_ep_queue(&mEp
->ep
, req
, gfp_flags
);
1771 spin_lock(mEp
->lock
);
1780 spin_unlock(mEp
->lock
);
1781 usb_ep_free_request(&mEp
->ep
, req
);
1782 spin_lock(mEp
->lock
);
1787 * isr_setup_status_complete: setup_status request complete function
1789 * @req: request handled
1791 * Caller must release lock. Put the port in test mode if test mode
1792 * feature is selected.
1795 isr_setup_status_complete(struct usb_ep
*ep
, struct usb_request
*req
)
1797 struct ci13xxx
*udc
= req
->context
;
1798 unsigned long flags
;
1800 trace("%p, %p", ep
, req
);
1802 spin_lock_irqsave(udc
->lock
, flags
);
1804 hw_port_test_set(udc
->test_mode
);
1805 spin_unlock_irqrestore(udc
->lock
, flags
);
1809 * isr_setup_status_phase: queues the status phase of a setup transation
1812 * This function returns an error code
1814 static int isr_setup_status_phase(struct ci13xxx
*udc
)
1815 __releases(mEp
->lock
)
1816 __acquires(mEp
->lock
)
1819 struct ci13xxx_ep
*mEp
;
1823 mEp
= (udc
->ep0_dir
== TX
) ? &udc
->ep0out
: &udc
->ep0in
;
1824 udc
->status
->context
= udc
;
1825 udc
->status
->complete
= isr_setup_status_complete
;
1827 spin_unlock(mEp
->lock
);
1828 retval
= usb_ep_queue(&mEp
->ep
, udc
->status
, GFP_ATOMIC
);
1829 spin_lock(mEp
->lock
);
1835 * isr_tr_complete_low: transaction complete low level handler
1838 * This function returns an error code
1839 * Caller must hold lock
1841 static int isr_tr_complete_low(struct ci13xxx_ep
*mEp
)
1842 __releases(mEp
->lock
)
1843 __acquires(mEp
->lock
)
1845 struct ci13xxx_req
*mReq
, *mReqTemp
;
1846 struct ci13xxx_ep
*mEpTemp
= mEp
;
1847 int uninitialized_var(retval
);
1851 if (list_empty(&mEp
->qh
.queue
))
1854 list_for_each_entry_safe(mReq
, mReqTemp
, &mEp
->qh
.queue
,
1856 retval
= _hardware_dequeue(mEp
, mReq
);
1859 list_del_init(&mReq
->queue
);
1860 dbg_done(_usb_addr(mEp
), mReq
->ptr
->token
, retval
);
1861 if (mReq
->req
.complete
!= NULL
) {
1862 spin_unlock(mEp
->lock
);
1863 if ((mEp
->type
== USB_ENDPOINT_XFER_CONTROL
) &&
1865 mEpTemp
= &_udc
->ep0in
;
1866 mReq
->req
.complete(&mEpTemp
->ep
, &mReq
->req
);
1867 spin_lock(mEp
->lock
);
1871 if (retval
== -EBUSY
)
1874 dbg_event(_usb_addr(mEp
), "DONE", retval
);
1880 * isr_tr_complete_handler: transaction complete interrupt handler
1881 * @udc: UDC descriptor
1883 * This function handles traffic events
1885 static void isr_tr_complete_handler(struct ci13xxx
*udc
)
1886 __releases(udc
->lock
)
1887 __acquires(udc
->lock
)
1899 for (i
= 0; i
< hw_ep_max
; i
++) {
1900 struct ci13xxx_ep
*mEp
= &udc
->ci13xxx_ep
[i
];
1901 int type
, num
, dir
, err
= -EINVAL
;
1902 struct usb_ctrlrequest req
;
1904 if (mEp
->desc
== NULL
)
1905 continue; /* not configured */
1907 if (hw_test_and_clear_complete(i
)) {
1908 err
= isr_tr_complete_low(mEp
);
1909 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
) {
1910 if (err
> 0) /* needs status phase */
1911 err
= isr_setup_status_phase(udc
);
1913 dbg_event(_usb_addr(mEp
),
1915 spin_unlock(udc
->lock
);
1916 if (usb_ep_set_halt(&mEp
->ep
))
1917 err("error: ep_set_halt");
1918 spin_lock(udc
->lock
);
1923 if (mEp
->type
!= USB_ENDPOINT_XFER_CONTROL
||
1924 !hw_test_and_clear_setup_status(i
))
1928 warn("ctrl traffic received at endpoint");
1933 * Flush data and handshake transactions of previous
1936 _ep_nuke(&udc
->ep0out
);
1937 _ep_nuke(&udc
->ep0in
);
1939 /* read_setup_packet */
1941 hw_test_and_set_setup_guard();
1942 memcpy(&req
, &mEp
->qh
.ptr
->setup
, sizeof(req
));
1943 } while (!hw_test_and_clear_setup_guard());
1945 type
= req
.bRequestType
;
1947 udc
->ep0_dir
= (type
& USB_DIR_IN
) ? TX
: RX
;
1949 dbg_setup(_usb_addr(mEp
), &req
);
1951 switch (req
.bRequest
) {
1952 case USB_REQ_CLEAR_FEATURE
:
1953 if (type
== (USB_DIR_OUT
|USB_RECIP_ENDPOINT
) &&
1954 le16_to_cpu(req
.wValue
) ==
1955 USB_ENDPOINT_HALT
) {
1956 if (req
.wLength
!= 0)
1958 num
= le16_to_cpu(req
.wIndex
);
1959 dir
= num
& USB_ENDPOINT_DIR_MASK
;
1960 num
&= USB_ENDPOINT_NUMBER_MASK
;
1963 if (!udc
->ci13xxx_ep
[num
].wedge
) {
1964 spin_unlock(udc
->lock
);
1965 err
= usb_ep_clear_halt(
1966 &udc
->ci13xxx_ep
[num
].ep
);
1967 spin_lock(udc
->lock
);
1971 err
= isr_setup_status_phase(udc
);
1972 } else if (type
== (USB_DIR_OUT
|USB_RECIP_DEVICE
) &&
1973 le16_to_cpu(req
.wValue
) ==
1974 USB_DEVICE_REMOTE_WAKEUP
) {
1975 if (req
.wLength
!= 0)
1977 udc
->remote_wakeup
= 0;
1978 err
= isr_setup_status_phase(udc
);
1983 case USB_REQ_GET_STATUS
:
1984 if (type
!= (USB_DIR_IN
|USB_RECIP_DEVICE
) &&
1985 type
!= (USB_DIR_IN
|USB_RECIP_ENDPOINT
) &&
1986 type
!= (USB_DIR_IN
|USB_RECIP_INTERFACE
))
1988 if (le16_to_cpu(req
.wLength
) != 2 ||
1989 le16_to_cpu(req
.wValue
) != 0)
1991 err
= isr_get_status_response(udc
, &req
);
1993 case USB_REQ_SET_ADDRESS
:
1994 if (type
!= (USB_DIR_OUT
|USB_RECIP_DEVICE
))
1996 if (le16_to_cpu(req
.wLength
) != 0 ||
1997 le16_to_cpu(req
.wIndex
) != 0)
1999 err
= hw_usb_set_address((u8
)le16_to_cpu(req
.wValue
));
2002 err
= isr_setup_status_phase(udc
);
2004 case USB_REQ_SET_FEATURE
:
2005 if (type
== (USB_DIR_OUT
|USB_RECIP_ENDPOINT
) &&
2006 le16_to_cpu(req
.wValue
) ==
2007 USB_ENDPOINT_HALT
) {
2008 if (req
.wLength
!= 0)
2010 num
= le16_to_cpu(req
.wIndex
);
2011 dir
= num
& USB_ENDPOINT_DIR_MASK
;
2012 num
&= USB_ENDPOINT_NUMBER_MASK
;
2016 spin_unlock(udc
->lock
);
2017 err
= usb_ep_set_halt(&udc
->ci13xxx_ep
[num
].ep
);
2018 spin_lock(udc
->lock
);
2020 isr_setup_status_phase(udc
);
2021 } else if (type
== (USB_DIR_OUT
|USB_RECIP_DEVICE
)) {
2022 if (req
.wLength
!= 0)
2024 switch (le16_to_cpu(req
.wValue
)) {
2025 case USB_DEVICE_REMOTE_WAKEUP
:
2026 udc
->remote_wakeup
= 1;
2027 err
= isr_setup_status_phase(udc
);
2029 case USB_DEVICE_TEST_MODE
:
2030 tmode
= le16_to_cpu(req
.wIndex
) >> 8;
2037 udc
->test_mode
= tmode
;
2038 err
= isr_setup_status_phase(
2053 if (req
.wLength
== 0) /* no data phase */
2056 spin_unlock(udc
->lock
);
2057 err
= udc
->driver
->setup(&udc
->gadget
, &req
);
2058 spin_lock(udc
->lock
);
2063 dbg_event(_usb_addr(mEp
), "ERROR", err
);
2065 spin_unlock(udc
->lock
);
2066 if (usb_ep_set_halt(&mEp
->ep
))
2067 err("error: ep_set_halt");
2068 spin_lock(udc
->lock
);
2073 /******************************************************************************
2075 *****************************************************************************/
2077 * ep_enable: configure endpoint, making it usable
2079 * Check usb_ep_enable() at "usb_gadget.h" for details
2081 static int ep_enable(struct usb_ep
*ep
,
2082 const struct usb_endpoint_descriptor
*desc
)
2084 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2086 unsigned long flags
;
2088 trace("%p, %p", ep
, desc
);
2090 if (ep
== NULL
|| desc
== NULL
)
2093 spin_lock_irqsave(mEp
->lock
, flags
);
2095 /* only internal SW should enable ctrl endpts */
2099 if (!list_empty(&mEp
->qh
.queue
))
2100 warn("enabling a non-empty endpoint!");
2102 mEp
->dir
= usb_endpoint_dir_in(desc
) ? TX
: RX
;
2103 mEp
->num
= usb_endpoint_num(desc
);
2104 mEp
->type
= usb_endpoint_type(desc
);
2106 mEp
->ep
.maxpacket
= usb_endpoint_maxp(desc
);
2108 dbg_event(_usb_addr(mEp
), "ENABLE", 0);
2110 mEp
->qh
.ptr
->cap
= 0;
2112 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
)
2113 mEp
->qh
.ptr
->cap
|= QH_IOS
;
2114 else if (mEp
->type
== USB_ENDPOINT_XFER_ISOC
)
2115 mEp
->qh
.ptr
->cap
&= ~QH_MULT
;
2117 mEp
->qh
.ptr
->cap
&= ~QH_ZLT
;
2120 (mEp
->ep
.maxpacket
<< ffs_nr(QH_MAX_PKT
)) & QH_MAX_PKT
;
2121 mEp
->qh
.ptr
->td
.next
|= TD_TERMINATE
; /* needed? */
2124 * Enable endpoints in the HW other than ep0 as ep0
2128 retval
|= hw_ep_enable(mEp
->num
, mEp
->dir
, mEp
->type
);
2130 spin_unlock_irqrestore(mEp
->lock
, flags
);
2135 * ep_disable: endpoint is no longer usable
2137 * Check usb_ep_disable() at "usb_gadget.h" for details
2139 static int ep_disable(struct usb_ep
*ep
)
2141 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2142 int direction
, retval
= 0;
2143 unsigned long flags
;
2149 else if (mEp
->desc
== NULL
)
2152 spin_lock_irqsave(mEp
->lock
, flags
);
2154 /* only internal SW should disable ctrl endpts */
2156 direction
= mEp
->dir
;
2158 dbg_event(_usb_addr(mEp
), "DISABLE", 0);
2160 retval
|= _ep_nuke(mEp
);
2161 retval
|= hw_ep_disable(mEp
->num
, mEp
->dir
);
2163 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
)
2164 mEp
->dir
= (mEp
->dir
== TX
) ? RX
: TX
;
2166 } while (mEp
->dir
!= direction
);
2170 spin_unlock_irqrestore(mEp
->lock
, flags
);
2175 * ep_alloc_request: allocate a request object to use with this endpoint
2177 * Check usb_ep_alloc_request() at "usb_gadget.h" for details
2179 static struct usb_request
*ep_alloc_request(struct usb_ep
*ep
, gfp_t gfp_flags
)
2181 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2182 struct ci13xxx_req
*mReq
= NULL
;
2184 trace("%p, %i", ep
, gfp_flags
);
2191 mReq
= kzalloc(sizeof(struct ci13xxx_req
), gfp_flags
);
2193 INIT_LIST_HEAD(&mReq
->queue
);
2194 mReq
->req
.dma
= DMA_ADDR_INVALID
;
2196 mReq
->ptr
= dma_pool_alloc(mEp
->td_pool
, gfp_flags
,
2198 if (mReq
->ptr
== NULL
) {
2204 dbg_event(_usb_addr(mEp
), "ALLOC", mReq
== NULL
);
2206 return (mReq
== NULL
) ? NULL
: &mReq
->req
;
2210 * ep_free_request: frees a request object
2212 * Check usb_ep_free_request() at "usb_gadget.h" for details
2214 static void ep_free_request(struct usb_ep
*ep
, struct usb_request
*req
)
2216 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2217 struct ci13xxx_req
*mReq
= container_of(req
, struct ci13xxx_req
, req
);
2218 unsigned long flags
;
2220 trace("%p, %p", ep
, req
);
2222 if (ep
== NULL
|| req
== NULL
) {
2225 } else if (!list_empty(&mReq
->queue
)) {
2230 spin_lock_irqsave(mEp
->lock
, flags
);
2233 dma_pool_free(mEp
->td_pool
, mReq
->ptr
, mReq
->dma
);
2236 dbg_event(_usb_addr(mEp
), "FREE", 0);
2238 spin_unlock_irqrestore(mEp
->lock
, flags
);
2242 * ep_queue: queues (submits) an I/O request to an endpoint
2244 * Check usb_ep_queue()* at usb_gadget.h" for details
2246 static int ep_queue(struct usb_ep
*ep
, struct usb_request
*req
,
2247 gfp_t __maybe_unused gfp_flags
)
2249 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2250 struct ci13xxx_req
*mReq
= container_of(req
, struct ci13xxx_req
, req
);
2252 unsigned long flags
;
2254 trace("%p, %p, %X", ep
, req
, gfp_flags
);
2256 if (ep
== NULL
|| req
== NULL
|| mEp
->desc
== NULL
)
2259 spin_lock_irqsave(mEp
->lock
, flags
);
2261 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
) {
2263 mEp
= (_udc
->ep0_dir
== RX
) ?
2264 &_udc
->ep0out
: &_udc
->ep0in
;
2265 if (!list_empty(&mEp
->qh
.queue
)) {
2267 retval
= -EOVERFLOW
;
2268 warn("endpoint ctrl %X nuked", _usb_addr(mEp
));
2272 /* first nuke then test link, e.g. previous status has not sent */
2273 if (!list_empty(&mReq
->queue
)) {
2275 err("request already in queue");
2279 if (req
->length
> (4 * CI13XXX_PAGE_SIZE
)) {
2280 req
->length
= (4 * CI13XXX_PAGE_SIZE
);
2282 warn("request length truncated");
2285 dbg_queue(_usb_addr(mEp
), req
, retval
);
2288 mReq
->req
.status
= -EINPROGRESS
;
2289 mReq
->req
.actual
= 0;
2291 retval
= _hardware_enqueue(mEp
, mReq
);
2293 if (retval
== -EALREADY
) {
2294 dbg_event(_usb_addr(mEp
), "QUEUE", retval
);
2298 list_add_tail(&mReq
->queue
, &mEp
->qh
.queue
);
2301 spin_unlock_irqrestore(mEp
->lock
, flags
);
2306 * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
2308 * Check usb_ep_dequeue() at "usb_gadget.h" for details
2310 static int ep_dequeue(struct usb_ep
*ep
, struct usb_request
*req
)
2312 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2313 struct ci13xxx_req
*mReq
= container_of(req
, struct ci13xxx_req
, req
);
2314 unsigned long flags
;
2316 trace("%p, %p", ep
, req
);
2318 if (ep
== NULL
|| req
== NULL
|| mReq
->req
.status
!= -EALREADY
||
2319 mEp
->desc
== NULL
|| list_empty(&mReq
->queue
) ||
2320 list_empty(&mEp
->qh
.queue
))
2323 spin_lock_irqsave(mEp
->lock
, flags
);
2325 dbg_event(_usb_addr(mEp
), "DEQUEUE", 0);
2327 hw_ep_flush(mEp
->num
, mEp
->dir
);
2330 list_del_init(&mReq
->queue
);
2332 dma_unmap_single(mEp
->device
, mReq
->req
.dma
, mReq
->req
.length
,
2333 mEp
->dir
? DMA_TO_DEVICE
: DMA_FROM_DEVICE
);
2334 mReq
->req
.dma
= DMA_ADDR_INVALID
;
2337 req
->status
= -ECONNRESET
;
2339 if (mReq
->req
.complete
!= NULL
) {
2340 spin_unlock(mEp
->lock
);
2341 mReq
->req
.complete(&mEp
->ep
, &mReq
->req
);
2342 spin_lock(mEp
->lock
);
2345 spin_unlock_irqrestore(mEp
->lock
, flags
);
2350 * ep_set_halt: sets the endpoint halt feature
2352 * Check usb_ep_set_halt() at "usb_gadget.h" for details
2354 static int ep_set_halt(struct usb_ep
*ep
, int value
)
2356 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2357 int direction
, retval
= 0;
2358 unsigned long flags
;
2360 trace("%p, %i", ep
, value
);
2362 if (ep
== NULL
|| mEp
->desc
== NULL
)
2365 spin_lock_irqsave(mEp
->lock
, flags
);
2368 /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
2369 if (value
&& mEp
->type
== USB_ENDPOINT_XFER_BULK
&& mEp
->dir
== TX
&&
2370 !list_empty(&mEp
->qh
.queue
)) {
2371 spin_unlock_irqrestore(mEp
->lock
, flags
);
2376 direction
= mEp
->dir
;
2378 dbg_event(_usb_addr(mEp
), "HALT", value
);
2379 retval
|= hw_ep_set_halt(mEp
->num
, mEp
->dir
, value
);
2384 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
)
2385 mEp
->dir
= (mEp
->dir
== TX
) ? RX
: TX
;
2387 } while (mEp
->dir
!= direction
);
2389 spin_unlock_irqrestore(mEp
->lock
, flags
);
2394 * ep_set_wedge: sets the halt feature and ignores clear requests
2396 * Check usb_ep_set_wedge() at "usb_gadget.h" for details
2398 static int ep_set_wedge(struct usb_ep
*ep
)
2400 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2401 unsigned long flags
;
2405 if (ep
== NULL
|| mEp
->desc
== NULL
)
2408 spin_lock_irqsave(mEp
->lock
, flags
);
2410 dbg_event(_usb_addr(mEp
), "WEDGE", 0);
2413 spin_unlock_irqrestore(mEp
->lock
, flags
);
2415 return usb_ep_set_halt(ep
);
2419 * ep_fifo_flush: flushes contents of a fifo
2421 * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
2423 static void ep_fifo_flush(struct usb_ep
*ep
)
2425 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2426 unsigned long flags
;
2431 err("%02X: -EINVAL", _usb_addr(mEp
));
2435 spin_lock_irqsave(mEp
->lock
, flags
);
2437 dbg_event(_usb_addr(mEp
), "FFLUSH", 0);
2438 hw_ep_flush(mEp
->num
, mEp
->dir
);
2440 spin_unlock_irqrestore(mEp
->lock
, flags
);
2444 * Endpoint-specific part of the API to the USB controller hardware
2445 * Check "usb_gadget.h" for details
2447 static const struct usb_ep_ops usb_ep_ops
= {
2448 .enable
= ep_enable
,
2449 .disable
= ep_disable
,
2450 .alloc_request
= ep_alloc_request
,
2451 .free_request
= ep_free_request
,
2453 .dequeue
= ep_dequeue
,
2454 .set_halt
= ep_set_halt
,
2455 .set_wedge
= ep_set_wedge
,
2456 .fifo_flush
= ep_fifo_flush
,
2459 /******************************************************************************
2461 *****************************************************************************/
2462 static int ci13xxx_vbus_session(struct usb_gadget
*_gadget
, int is_active
)
2464 struct ci13xxx
*udc
= container_of(_gadget
, struct ci13xxx
, gadget
);
2465 unsigned long flags
;
2466 int gadget_ready
= 0;
2468 if (!(udc
->udc_driver
->flags
& CI13XXX_PULLUP_ON_VBUS
))
2471 spin_lock_irqsave(udc
->lock
, flags
);
2472 udc
->vbus_active
= is_active
;
2475 spin_unlock_irqrestore(udc
->lock
, flags
);
2479 pm_runtime_get_sync(&_gadget
->dev
);
2480 hw_device_reset(udc
);
2481 hw_device_state(udc
->ep0out
.qh
.dma
);
2484 if (udc
->udc_driver
->notify_event
)
2485 udc
->udc_driver
->notify_event(udc
,
2486 CI13XXX_CONTROLLER_STOPPED_EVENT
);
2487 _gadget_stop_activity(&udc
->gadget
);
2488 pm_runtime_put_sync(&_gadget
->dev
);
2495 static int ci13xxx_wakeup(struct usb_gadget
*_gadget
)
2497 struct ci13xxx
*udc
= container_of(_gadget
, struct ci13xxx
, gadget
);
2498 unsigned long flags
;
2503 spin_lock_irqsave(udc
->lock
, flags
);
2504 if (!udc
->remote_wakeup
) {
2506 dbg_trace("remote wakeup feature is not enabled\n");
2509 if (!hw_cread(CAP_PORTSC
, PORTSC_SUSP
)) {
2511 dbg_trace("port is not suspended\n");
2514 hw_cwrite(CAP_PORTSC
, PORTSC_FPR
, PORTSC_FPR
);
2516 spin_unlock_irqrestore(udc
->lock
, flags
);
2520 static int ci13xxx_vbus_draw(struct usb_gadget
*_gadget
, unsigned mA
)
2522 struct ci13xxx
*udc
= container_of(_gadget
, struct ci13xxx
, gadget
);
2524 if (udc
->transceiver
)
2525 return otg_set_power(udc
->transceiver
, mA
);
2529 static int ci13xxx_start(struct usb_gadget_driver
*driver
,
2530 int (*bind
)(struct usb_gadget
*));
2531 static int ci13xxx_stop(struct usb_gadget_driver
*driver
);
2533 * Device operations part of the API to the USB controller hardware,
2534 * which don't involve endpoints (or i/o)
2535 * Check "usb_gadget.h" for details
2537 static const struct usb_gadget_ops usb_gadget_ops
= {
2538 .vbus_session
= ci13xxx_vbus_session
,
2539 .wakeup
= ci13xxx_wakeup
,
2540 .vbus_draw
= ci13xxx_vbus_draw
,
2541 .start
= ci13xxx_start
,
2542 .stop
= ci13xxx_stop
,
2546 * ci13xxx_start: register a gadget driver
2547 * @driver: the driver being registered
2548 * @bind: the driver's bind callback
2550 * Check ci13xxx_start() at <linux/usb/gadget.h> for details.
2551 * Interrupts are enabled here.
2553 static int ci13xxx_start(struct usb_gadget_driver
*driver
,
2554 int (*bind
)(struct usb_gadget
*))
2556 struct ci13xxx
*udc
= _udc
;
2557 unsigned long flags
;
2559 int retval
= -ENOMEM
;
2561 trace("%p", driver
);
2563 if (driver
== NULL
||
2565 driver
->setup
== NULL
||
2566 driver
->disconnect
== NULL
||
2567 driver
->suspend
== NULL
||
2568 driver
->resume
== NULL
)
2570 else if (udc
== NULL
)
2572 else if (udc
->driver
!= NULL
)
2575 /* alloc resources */
2576 udc
->qh_pool
= dma_pool_create("ci13xxx_qh", &udc
->gadget
.dev
,
2577 sizeof(struct ci13xxx_qh
),
2578 64, CI13XXX_PAGE_SIZE
);
2579 if (udc
->qh_pool
== NULL
)
2582 udc
->td_pool
= dma_pool_create("ci13xxx_td", &udc
->gadget
.dev
,
2583 sizeof(struct ci13xxx_td
),
2584 64, CI13XXX_PAGE_SIZE
);
2585 if (udc
->td_pool
== NULL
) {
2586 dma_pool_destroy(udc
->qh_pool
);
2587 udc
->qh_pool
= NULL
;
2591 spin_lock_irqsave(udc
->lock
, flags
);
2593 info("hw_ep_max = %d", hw_ep_max
);
2595 udc
->gadget
.dev
.driver
= NULL
;
2598 for (i
= 0; i
< hw_ep_max
/2; i
++) {
2599 for (j
= RX
; j
<= TX
; j
++) {
2600 int k
= i
+ j
* hw_ep_max
/2;
2601 struct ci13xxx_ep
*mEp
= &udc
->ci13xxx_ep
[k
];
2603 scnprintf(mEp
->name
, sizeof(mEp
->name
), "ep%i%s", i
,
2604 (j
== TX
) ? "in" : "out");
2606 mEp
->lock
= udc
->lock
;
2607 mEp
->device
= &udc
->gadget
.dev
;
2608 mEp
->td_pool
= udc
->td_pool
;
2610 mEp
->ep
.name
= mEp
->name
;
2611 mEp
->ep
.ops
= &usb_ep_ops
;
2612 mEp
->ep
.maxpacket
= CTRL_PAYLOAD_MAX
;
2614 INIT_LIST_HEAD(&mEp
->qh
.queue
);
2615 spin_unlock_irqrestore(udc
->lock
, flags
);
2616 mEp
->qh
.ptr
= dma_pool_alloc(udc
->qh_pool
, GFP_KERNEL
,
2618 spin_lock_irqsave(udc
->lock
, flags
);
2619 if (mEp
->qh
.ptr
== NULL
)
2622 memset(mEp
->qh
.ptr
, 0, sizeof(*mEp
->qh
.ptr
));
2624 /* skip ep0 out and in endpoints */
2628 list_add_tail(&mEp
->ep
.ep_list
, &udc
->gadget
.ep_list
);
2633 spin_unlock_irqrestore(udc
->lock
, flags
);
2634 udc
->ep0out
.ep
.desc
= &ctrl_endpt_out_desc
;
2635 retval
= usb_ep_enable(&udc
->ep0out
.ep
);
2639 udc
->ep0in
.ep
.desc
= &ctrl_endpt_in_desc
;
2640 retval
= usb_ep_enable(&udc
->ep0in
.ep
);
2643 spin_lock_irqsave(udc
->lock
, flags
);
2645 udc
->gadget
.ep0
= &udc
->ep0in
.ep
;
2647 driver
->driver
.bus
= NULL
;
2648 udc
->gadget
.dev
.driver
= &driver
->driver
;
2650 spin_unlock_irqrestore(udc
->lock
, flags
);
2651 retval
= bind(&udc
->gadget
); /* MAY SLEEP */
2652 spin_lock_irqsave(udc
->lock
, flags
);
2655 udc
->gadget
.dev
.driver
= NULL
;
2659 udc
->driver
= driver
;
2660 pm_runtime_get_sync(&udc
->gadget
.dev
);
2661 if (udc
->udc_driver
->flags
& CI13XXX_PULLUP_ON_VBUS
) {
2662 if (udc
->vbus_active
) {
2663 if (udc
->udc_driver
->flags
& CI13XXX_REGS_SHARED
)
2664 hw_device_reset(udc
);
2666 pm_runtime_put_sync(&udc
->gadget
.dev
);
2671 retval
= hw_device_state(udc
->ep0out
.qh
.dma
);
2673 pm_runtime_put_sync(&udc
->gadget
.dev
);
2676 spin_unlock_irqrestore(udc
->lock
, flags
);
2681 * ci13xxx_stop: unregister a gadget driver
2683 * Check usb_gadget_unregister_driver() at "usb_gadget.h" for details
2685 static int ci13xxx_stop(struct usb_gadget_driver
*driver
)
2687 struct ci13xxx
*udc
= _udc
;
2688 unsigned long i
, flags
;
2690 trace("%p", driver
);
2692 if (driver
== NULL
||
2693 driver
->unbind
== NULL
||
2694 driver
->setup
== NULL
||
2695 driver
->disconnect
== NULL
||
2696 driver
->suspend
== NULL
||
2697 driver
->resume
== NULL
||
2698 driver
!= udc
->driver
)
2701 spin_lock_irqsave(udc
->lock
, flags
);
2703 if (!(udc
->udc_driver
->flags
& CI13XXX_PULLUP_ON_VBUS
) ||
2706 if (udc
->udc_driver
->notify_event
)
2707 udc
->udc_driver
->notify_event(udc
,
2708 CI13XXX_CONTROLLER_STOPPED_EVENT
);
2709 spin_unlock_irqrestore(udc
->lock
, flags
);
2710 _gadget_stop_activity(&udc
->gadget
);
2711 spin_lock_irqsave(udc
->lock
, flags
);
2712 pm_runtime_put(&udc
->gadget
.dev
);
2716 spin_unlock_irqrestore(udc
->lock
, flags
);
2717 driver
->unbind(&udc
->gadget
); /* MAY SLEEP */
2718 spin_lock_irqsave(udc
->lock
, flags
);
2720 udc
->gadget
.dev
.driver
= NULL
;
2722 /* free resources */
2723 for (i
= 0; i
< hw_ep_max
; i
++) {
2724 struct ci13xxx_ep
*mEp
= &udc
->ci13xxx_ep
[i
];
2726 if (!list_empty(&mEp
->ep
.ep_list
))
2727 list_del_init(&mEp
->ep
.ep_list
);
2729 if (mEp
->qh
.ptr
!= NULL
)
2730 dma_pool_free(udc
->qh_pool
, mEp
->qh
.ptr
, mEp
->qh
.dma
);
2733 udc
->gadget
.ep0
= NULL
;
2736 spin_unlock_irqrestore(udc
->lock
, flags
);
2738 if (udc
->td_pool
!= NULL
) {
2739 dma_pool_destroy(udc
->td_pool
);
2740 udc
->td_pool
= NULL
;
2742 if (udc
->qh_pool
!= NULL
) {
2743 dma_pool_destroy(udc
->qh_pool
);
2744 udc
->qh_pool
= NULL
;
2750 /******************************************************************************
2752 *****************************************************************************/
2754 * udc_irq: global interrupt handler
2756 * This function returns IRQ_HANDLED if the IRQ has been handled
2757 * It locks access to registers
2759 static irqreturn_t
udc_irq(void)
2761 struct ci13xxx
*udc
= _udc
;
2772 spin_lock(udc
->lock
);
2774 if (udc
->udc_driver
->flags
& CI13XXX_REGS_SHARED
) {
2775 if (hw_cread(CAP_USBMODE
, USBMODE_CM
) !=
2776 USBMODE_CM_DEVICE
) {
2777 spin_unlock(udc
->lock
);
2781 intr
= hw_test_and_clear_intr_active();
2783 isr_statistics
.hndl
.buf
[isr_statistics
.hndl
.idx
++] = intr
;
2784 isr_statistics
.hndl
.idx
&= ISR_MASK
;
2785 isr_statistics
.hndl
.cnt
++;
2787 /* order defines priority - do NOT change it */
2788 if (USBi_URI
& intr
) {
2789 isr_statistics
.uri
++;
2790 isr_reset_handler(udc
);
2792 if (USBi_PCI
& intr
) {
2793 isr_statistics
.pci
++;
2794 udc
->gadget
.speed
= hw_port_is_high_speed() ?
2795 USB_SPEED_HIGH
: USB_SPEED_FULL
;
2796 if (udc
->suspended
) {
2797 spin_unlock(udc
->lock
);
2798 udc
->driver
->resume(&udc
->gadget
);
2799 spin_lock(udc
->lock
);
2803 if (USBi_UEI
& intr
)
2804 isr_statistics
.uei
++;
2805 if (USBi_UI
& intr
) {
2806 isr_statistics
.ui
++;
2807 isr_tr_complete_handler(udc
);
2809 if (USBi_SLI
& intr
) {
2810 if (udc
->gadget
.speed
!= USB_SPEED_UNKNOWN
) {
2812 spin_unlock(udc
->lock
);
2813 udc
->driver
->suspend(&udc
->gadget
);
2814 spin_lock(udc
->lock
);
2816 isr_statistics
.sli
++;
2818 retval
= IRQ_HANDLED
;
2820 isr_statistics
.none
++;
2823 spin_unlock(udc
->lock
);
2829 * udc_release: driver release function
2832 * Currently does nothing
2834 static void udc_release(struct device
*dev
)
2843 * udc_probe: parent probe must call this to initialize UDC
2844 * @dev: parent device
2845 * @regs: registers base address
2846 * @name: driver name
2848 * This function returns an error code
2849 * No interrupts active, the IRQ has not been requested yet
2850 * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask
2852 static int udc_probe(struct ci13xxx_udc_driver
*driver
, struct device
*dev
,
2855 struct ci13xxx
*udc
;
2858 trace("%p, %p, %p", dev
, regs
, name
);
2860 if (dev
== NULL
|| regs
== NULL
|| driver
== NULL
||
2861 driver
->name
== NULL
)
2864 udc
= kzalloc(sizeof(struct ci13xxx
), GFP_KERNEL
);
2868 udc
->lock
= &udc_lock
;
2870 udc
->udc_driver
= driver
;
2872 udc
->gadget
.ops
= &usb_gadget_ops
;
2873 udc
->gadget
.speed
= USB_SPEED_UNKNOWN
;
2874 udc
->gadget
.is_dualspeed
= 1;
2875 udc
->gadget
.is_otg
= 0;
2876 udc
->gadget
.name
= driver
->name
;
2878 INIT_LIST_HEAD(&udc
->gadget
.ep_list
);
2879 udc
->gadget
.ep0
= NULL
;
2881 dev_set_name(&udc
->gadget
.dev
, "gadget");
2882 udc
->gadget
.dev
.dma_mask
= dev
->dma_mask
;
2883 udc
->gadget
.dev
.coherent_dma_mask
= dev
->coherent_dma_mask
;
2884 udc
->gadget
.dev
.parent
= dev
;
2885 udc
->gadget
.dev
.release
= udc_release
;
2887 retval
= hw_device_init(regs
);
2891 udc
->transceiver
= otg_get_transceiver();
2893 if (udc
->udc_driver
->flags
& CI13XXX_REQUIRE_TRANSCEIVER
) {
2894 if (udc
->transceiver
== NULL
) {
2900 if (!(udc
->udc_driver
->flags
& CI13XXX_REGS_SHARED
)) {
2901 retval
= hw_device_reset(udc
);
2903 goto put_transceiver
;
2906 retval
= device_register(&udc
->gadget
.dev
);
2908 put_device(&udc
->gadget
.dev
);
2909 goto put_transceiver
;
2912 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
2913 retval
= dbg_create_files(&udc
->gadget
.dev
);
2918 if (udc
->transceiver
) {
2919 retval
= otg_set_peripheral(udc
->transceiver
, &udc
->gadget
);
2924 retval
= usb_add_gadget_udc(dev
, &udc
->gadget
);
2928 pm_runtime_no_callbacks(&udc
->gadget
.dev
);
2929 pm_runtime_enable(&udc
->gadget
.dev
);
2935 if (udc
->transceiver
) {
2936 otg_set_peripheral(udc
->transceiver
, &udc
->gadget
);
2937 otg_put_transceiver(udc
->transceiver
);
2940 err("error = %i", retval
);
2942 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
2943 dbg_remove_files(&udc
->gadget
.dev
);
2946 device_unregister(&udc
->gadget
.dev
);
2948 if (udc
->transceiver
)
2949 otg_put_transceiver(udc
->transceiver
);
2957 * udc_remove: parent remove must call this to remove UDC
2959 * No interrupts active, the IRQ has been released
2961 static void udc_remove(void)
2963 struct ci13xxx
*udc
= _udc
;
2969 usb_del_gadget_udc(&udc
->gadget
);
2971 if (udc
->transceiver
) {
2972 otg_set_peripheral(udc
->transceiver
, &udc
->gadget
);
2973 otg_put_transceiver(udc
->transceiver
);
2975 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
2976 dbg_remove_files(&udc
->gadget
.dev
);
2978 device_unregister(&udc
->gadget
.dev
);