]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/usb/gadget/function/f_mass_storage.c
Merge tag 'for-linus-20170825' of git://git.infradead.org/linux-mtd
[mirror_ubuntu-artful-kernel.git] / drivers / usb / gadget / function / f_mass_storage.c
1 /*
2 * f_mass_storage.c -- Mass Storage USB Composite Function
3 *
4 * Copyright (C) 2003-2008 Alan Stern
5 * Copyright (C) 2009 Samsung Electronics
6 * Author: Michal Nazarewicz <mina86@mina86.com>
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions, and the following disclaimer,
14 * without modification.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. The names of the above-listed copyright holders may not be used
19 * to endorse or promote products derived from this software without
20 * specific prior written permission.
21 *
22 * ALTERNATIVELY, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") as published by the Free Software
24 * Foundation, either version 2 of that License or (at your option) any
25 * later version.
26 *
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
28 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
29 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
31 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
32 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
33 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
34 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
35 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
36 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
37 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38 */
39
40 /*
41 * The Mass Storage Function acts as a USB Mass Storage device,
42 * appearing to the host as a disk drive or as a CD-ROM drive. In
43 * addition to providing an example of a genuinely useful composite
44 * function for a USB device, it also illustrates a technique of
45 * double-buffering for increased throughput.
46 *
47 * For more information about MSF and in particular its module
48 * parameters and sysfs interface read the
49 * <Documentation/usb/mass-storage.txt> file.
50 */
51
52 /*
53 * MSF is configured by specifying a fsg_config structure. It has the
54 * following fields:
55 *
56 * nluns Number of LUNs function have (anywhere from 1
57 * to FSG_MAX_LUNS).
58 * luns An array of LUN configuration values. This
59 * should be filled for each LUN that
60 * function will include (ie. for "nluns"
61 * LUNs). Each element of the array has
62 * the following fields:
63 * ->filename The path to the backing file for the LUN.
64 * Required if LUN is not marked as
65 * removable.
66 * ->ro Flag specifying access to the LUN shall be
67 * read-only. This is implied if CD-ROM
68 * emulation is enabled as well as when
69 * it was impossible to open "filename"
70 * in R/W mode.
71 * ->removable Flag specifying that LUN shall be indicated as
72 * being removable.
73 * ->cdrom Flag specifying that LUN shall be reported as
74 * being a CD-ROM.
75 * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12)
76 * commands for this LUN shall be ignored.
77 *
78 * vendor_name
79 * product_name
80 * release Information used as a reply to INQUIRY
81 * request. To use default set to NULL,
82 * NULL, 0xffff respectively. The first
83 * field should be 8 and the second 16
84 * characters or less.
85 *
86 * can_stall Set to permit function to halt bulk endpoints.
87 * Disabled on some USB devices known not
88 * to work correctly. You should set it
89 * to true.
90 *
91 * If "removable" is not set for a LUN then a backing file must be
92 * specified. If it is set, then NULL filename means the LUN's medium
93 * is not loaded (an empty string as "filename" in the fsg_config
94 * structure causes error). The CD-ROM emulation includes a single
95 * data track and no audio tracks; hence there need be only one
96 * backing file per LUN.
97 *
98 * This function is heavily based on "File-backed Storage Gadget" by
99 * Alan Stern which in turn is heavily based on "Gadget Zero" by David
100 * Brownell. The driver's SCSI command interface was based on the
101 * "Information technology - Small Computer System Interface - 2"
102 * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
103 * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
104 * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
105 * was based on the "Universal Serial Bus Mass Storage Class UFI
106 * Command Specification" document, Revision 1.0, December 14, 1998,
107 * available at
108 * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
109 */
110
111 /*
112 * Driver Design
113 *
114 * The MSF is fairly straightforward. There is a main kernel
115 * thread that handles most of the work. Interrupt routines field
116 * callbacks from the controller driver: bulk- and interrupt-request
117 * completion notifications, endpoint-0 events, and disconnect events.
118 * Completion events are passed to the main thread by wakeup calls. Many
119 * ep0 requests are handled at interrupt time, but SetInterface,
120 * SetConfiguration, and device reset requests are forwarded to the
121 * thread in the form of "exceptions" using SIGUSR1 signals (since they
122 * should interrupt any ongoing file I/O operations).
123 *
124 * The thread's main routine implements the standard command/data/status
125 * parts of a SCSI interaction. It and its subroutines are full of tests
126 * for pending signals/exceptions -- all this polling is necessary since
127 * the kernel has no setjmp/longjmp equivalents. (Maybe this is an
128 * indication that the driver really wants to be running in userspace.)
129 * An important point is that so long as the thread is alive it keeps an
130 * open reference to the backing file. This will prevent unmounting
131 * the backing file's underlying filesystem and could cause problems
132 * during system shutdown, for example. To prevent such problems, the
133 * thread catches INT, TERM, and KILL signals and converts them into
134 * an EXIT exception.
135 *
136 * In normal operation the main thread is started during the gadget's
137 * fsg_bind() callback and stopped during fsg_unbind(). But it can
138 * also exit when it receives a signal, and there's no point leaving
139 * the gadget running when the thread is dead. As of this moment, MSF
140 * provides no way to deregister the gadget when thread dies -- maybe
141 * a callback functions is needed.
142 *
143 * To provide maximum throughput, the driver uses a circular pipeline of
144 * buffer heads (struct fsg_buffhd). In principle the pipeline can be
145 * arbitrarily long; in practice the benefits don't justify having more
146 * than 2 stages (i.e., double buffering). But it helps to think of the
147 * pipeline as being a long one. Each buffer head contains a bulk-in and
148 * a bulk-out request pointer (since the buffer can be used for both
149 * output and input -- directions always are given from the host's
150 * point of view) as well as a pointer to the buffer and various state
151 * variables.
152 *
153 * Use of the pipeline follows a simple protocol. There is a variable
154 * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
155 * At any time that buffer head may still be in use from an earlier
156 * request, so each buffer head has a state variable indicating whether
157 * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the
158 * buffer head to be EMPTY, filling the buffer either by file I/O or by
159 * USB I/O (during which the buffer head is BUSY), and marking the buffer
160 * head FULL when the I/O is complete. Then the buffer will be emptied
161 * (again possibly by USB I/O, during which it is marked BUSY) and
162 * finally marked EMPTY again (possibly by a completion routine).
163 *
164 * A module parameter tells the driver to avoid stalling the bulk
165 * endpoints wherever the transport specification allows. This is
166 * necessary for some UDCs like the SuperH, which cannot reliably clear a
167 * halt on a bulk endpoint. However, under certain circumstances the
168 * Bulk-only specification requires a stall. In such cases the driver
169 * will halt the endpoint and set a flag indicating that it should clear
170 * the halt in software during the next device reset. Hopefully this
171 * will permit everything to work correctly. Furthermore, although the
172 * specification allows the bulk-out endpoint to halt when the host sends
173 * too much data, implementing this would cause an unavoidable race.
174 * The driver will always use the "no-stall" approach for OUT transfers.
175 *
176 * One subtle point concerns sending status-stage responses for ep0
177 * requests. Some of these requests, such as device reset, can involve
178 * interrupting an ongoing file I/O operation, which might take an
179 * arbitrarily long time. During that delay the host might give up on
180 * the original ep0 request and issue a new one. When that happens the
181 * driver should not notify the host about completion of the original
182 * request, as the host will no longer be waiting for it. So the driver
183 * assigns to each ep0 request a unique tag, and it keeps track of the
184 * tag value of the request associated with a long-running exception
185 * (device-reset, interface-change, or configuration-change). When the
186 * exception handler is finished, the status-stage response is submitted
187 * only if the current ep0 request tag is equal to the exception request
188 * tag. Thus only the most recently received ep0 request will get a
189 * status-stage response.
190 *
191 * Warning: This driver source file is too long. It ought to be split up
192 * into a header file plus about 3 separate .c files, to handle the details
193 * of the Gadget, USB Mass Storage, and SCSI protocols.
194 */
195
196
197 /* #define VERBOSE_DEBUG */
198 /* #define DUMP_MSGS */
199
200 #include <linux/blkdev.h>
201 #include <linux/completion.h>
202 #include <linux/dcache.h>
203 #include <linux/delay.h>
204 #include <linux/device.h>
205 #include <linux/fcntl.h>
206 #include <linux/file.h>
207 #include <linux/fs.h>
208 #include <linux/kref.h>
209 #include <linux/kthread.h>
210 #include <linux/sched/signal.h>
211 #include <linux/limits.h>
212 #include <linux/rwsem.h>
213 #include <linux/slab.h>
214 #include <linux/spinlock.h>
215 #include <linux/string.h>
216 #include <linux/freezer.h>
217 #include <linux/module.h>
218 #include <linux/uaccess.h>
219
220 #include <linux/usb/ch9.h>
221 #include <linux/usb/gadget.h>
222 #include <linux/usb/composite.h>
223
224 #include "configfs.h"
225
226
227 /*------------------------------------------------------------------------*/
228
229 #define FSG_DRIVER_DESC "Mass Storage Function"
230 #define FSG_DRIVER_VERSION "2009/09/11"
231
232 static const char fsg_string_interface[] = "Mass Storage";
233
234 #include "storage_common.h"
235 #include "f_mass_storage.h"
236
237 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
238 static struct usb_string fsg_strings[] = {
239 {FSG_STRING_INTERFACE, fsg_string_interface},
240 {}
241 };
242
243 static struct usb_gadget_strings fsg_stringtab = {
244 .language = 0x0409, /* en-us */
245 .strings = fsg_strings,
246 };
247
248 static struct usb_gadget_strings *fsg_strings_array[] = {
249 &fsg_stringtab,
250 NULL,
251 };
252
253 /*-------------------------------------------------------------------------*/
254
255 struct fsg_dev;
256 struct fsg_common;
257
258 /* Data shared by all the FSG instances. */
259 struct fsg_common {
260 struct usb_gadget *gadget;
261 struct usb_composite_dev *cdev;
262 struct fsg_dev *fsg, *new_fsg;
263 wait_queue_head_t io_wait;
264 wait_queue_head_t fsg_wait;
265
266 /* filesem protects: backing files in use */
267 struct rw_semaphore filesem;
268
269 /* lock protects: state and thread_task */
270 spinlock_t lock;
271
272 struct usb_ep *ep0; /* Copy of gadget->ep0 */
273 struct usb_request *ep0req; /* Copy of cdev->req */
274 unsigned int ep0_req_tag;
275
276 struct fsg_buffhd *next_buffhd_to_fill;
277 struct fsg_buffhd *next_buffhd_to_drain;
278 struct fsg_buffhd *buffhds;
279 unsigned int fsg_num_buffers;
280
281 int cmnd_size;
282 u8 cmnd[MAX_COMMAND_SIZE];
283
284 unsigned int lun;
285 struct fsg_lun *luns[FSG_MAX_LUNS];
286 struct fsg_lun *curlun;
287
288 unsigned int bulk_out_maxpacket;
289 enum fsg_state state; /* For exception handling */
290 unsigned int exception_req_tag;
291
292 enum data_direction data_dir;
293 u32 data_size;
294 u32 data_size_from_cmnd;
295 u32 tag;
296 u32 residue;
297 u32 usb_amount_left;
298
299 unsigned int can_stall:1;
300 unsigned int free_storage_on_release:1;
301 unsigned int phase_error:1;
302 unsigned int short_packet_received:1;
303 unsigned int bad_lun_okay:1;
304 unsigned int running:1;
305 unsigned int sysfs:1;
306
307 struct completion thread_notifier;
308 struct task_struct *thread_task;
309
310 /* Callback functions. */
311 const struct fsg_operations *ops;
312 /* Gadget's private data. */
313 void *private_data;
314
315 char inquiry_string[INQUIRY_STRING_LEN];
316
317 struct kref ref;
318 };
319
320 struct fsg_dev {
321 struct usb_function function;
322 struct usb_gadget *gadget; /* Copy of cdev->gadget */
323 struct fsg_common *common;
324
325 u16 interface_number;
326
327 unsigned int bulk_in_enabled:1;
328 unsigned int bulk_out_enabled:1;
329
330 unsigned long atomic_bitflags;
331 #define IGNORE_BULK_OUT 0
332
333 struct usb_ep *bulk_in;
334 struct usb_ep *bulk_out;
335 };
336
337 static inline int __fsg_is_set(struct fsg_common *common,
338 const char *func, unsigned line)
339 {
340 if (common->fsg)
341 return 1;
342 ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
343 WARN_ON(1);
344 return 0;
345 }
346
347 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
348
349 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
350 {
351 return container_of(f, struct fsg_dev, function);
352 }
353
354 typedef void (*fsg_routine_t)(struct fsg_dev *);
355
356 static int exception_in_progress(struct fsg_common *common)
357 {
358 return common->state > FSG_STATE_NORMAL;
359 }
360
361 /* Make bulk-out requests be divisible by the maxpacket size */
362 static void set_bulk_out_req_length(struct fsg_common *common,
363 struct fsg_buffhd *bh, unsigned int length)
364 {
365 unsigned int rem;
366
367 bh->bulk_out_intended_length = length;
368 rem = length % common->bulk_out_maxpacket;
369 if (rem > 0)
370 length += common->bulk_out_maxpacket - rem;
371 bh->outreq->length = length;
372 }
373
374
375 /*-------------------------------------------------------------------------*/
376
377 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
378 {
379 const char *name;
380
381 if (ep == fsg->bulk_in)
382 name = "bulk-in";
383 else if (ep == fsg->bulk_out)
384 name = "bulk-out";
385 else
386 name = ep->name;
387 DBG(fsg, "%s set halt\n", name);
388 return usb_ep_set_halt(ep);
389 }
390
391
392 /*-------------------------------------------------------------------------*/
393
394 /* These routines may be called in process context or in_irq */
395
396 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
397 {
398 unsigned long flags;
399
400 /*
401 * Do nothing if a higher-priority exception is already in progress.
402 * If a lower-or-equal priority exception is in progress, preempt it
403 * and notify the main thread by sending it a signal.
404 */
405 spin_lock_irqsave(&common->lock, flags);
406 if (common->state <= new_state) {
407 common->exception_req_tag = common->ep0_req_tag;
408 common->state = new_state;
409 if (common->thread_task)
410 send_sig_info(SIGUSR1, SEND_SIG_FORCED,
411 common->thread_task);
412 }
413 spin_unlock_irqrestore(&common->lock, flags);
414 }
415
416
417 /*-------------------------------------------------------------------------*/
418
419 static int ep0_queue(struct fsg_common *common)
420 {
421 int rc;
422
423 rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
424 common->ep0->driver_data = common;
425 if (rc != 0 && rc != -ESHUTDOWN) {
426 /* We can't do much more than wait for a reset */
427 WARNING(common, "error in submission: %s --> %d\n",
428 common->ep0->name, rc);
429 }
430 return rc;
431 }
432
433
434 /*-------------------------------------------------------------------------*/
435
436 /* Completion handlers. These always run in_irq. */
437
438 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
439 {
440 struct fsg_common *common = ep->driver_data;
441 struct fsg_buffhd *bh = req->context;
442
443 if (req->status || req->actual != req->length)
444 DBG(common, "%s --> %d, %u/%u\n", __func__,
445 req->status, req->actual, req->length);
446 if (req->status == -ECONNRESET) /* Request was cancelled */
447 usb_ep_fifo_flush(ep);
448
449 /* Synchronize with the smp_load_acquire() in sleep_thread() */
450 smp_store_release(&bh->state, BUF_STATE_EMPTY);
451 wake_up(&common->io_wait);
452 }
453
454 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
455 {
456 struct fsg_common *common = ep->driver_data;
457 struct fsg_buffhd *bh = req->context;
458
459 dump_msg(common, "bulk-out", req->buf, req->actual);
460 if (req->status || req->actual != bh->bulk_out_intended_length)
461 DBG(common, "%s --> %d, %u/%u\n", __func__,
462 req->status, req->actual, bh->bulk_out_intended_length);
463 if (req->status == -ECONNRESET) /* Request was cancelled */
464 usb_ep_fifo_flush(ep);
465
466 /* Synchronize with the smp_load_acquire() in sleep_thread() */
467 smp_store_release(&bh->state, BUF_STATE_FULL);
468 wake_up(&common->io_wait);
469 }
470
471 static int _fsg_common_get_max_lun(struct fsg_common *common)
472 {
473 int i = ARRAY_SIZE(common->luns) - 1;
474
475 while (i >= 0 && !common->luns[i])
476 --i;
477
478 return i;
479 }
480
481 static int fsg_setup(struct usb_function *f,
482 const struct usb_ctrlrequest *ctrl)
483 {
484 struct fsg_dev *fsg = fsg_from_func(f);
485 struct usb_request *req = fsg->common->ep0req;
486 u16 w_index = le16_to_cpu(ctrl->wIndex);
487 u16 w_value = le16_to_cpu(ctrl->wValue);
488 u16 w_length = le16_to_cpu(ctrl->wLength);
489
490 if (!fsg_is_set(fsg->common))
491 return -EOPNOTSUPP;
492
493 ++fsg->common->ep0_req_tag; /* Record arrival of a new request */
494 req->context = NULL;
495 req->length = 0;
496 dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
497
498 switch (ctrl->bRequest) {
499
500 case US_BULK_RESET_REQUEST:
501 if (ctrl->bRequestType !=
502 (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
503 break;
504 if (w_index != fsg->interface_number || w_value != 0 ||
505 w_length != 0)
506 return -EDOM;
507
508 /*
509 * Raise an exception to stop the current operation
510 * and reinitialize our state.
511 */
512 DBG(fsg, "bulk reset request\n");
513 raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET);
514 return USB_GADGET_DELAYED_STATUS;
515
516 case US_BULK_GET_MAX_LUN:
517 if (ctrl->bRequestType !=
518 (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
519 break;
520 if (w_index != fsg->interface_number || w_value != 0 ||
521 w_length != 1)
522 return -EDOM;
523 VDBG(fsg, "get max LUN\n");
524 *(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
525
526 /* Respond with data/status */
527 req->length = min((u16)1, w_length);
528 return ep0_queue(fsg->common);
529 }
530
531 VDBG(fsg,
532 "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
533 ctrl->bRequestType, ctrl->bRequest,
534 le16_to_cpu(ctrl->wValue), w_index, w_length);
535 return -EOPNOTSUPP;
536 }
537
538
539 /*-------------------------------------------------------------------------*/
540
541 /* All the following routines run in process context */
542
543 /* Use this for bulk or interrupt transfers, not ep0 */
544 static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
545 struct usb_request *req)
546 {
547 int rc;
548
549 if (ep == fsg->bulk_in)
550 dump_msg(fsg, "bulk-in", req->buf, req->length);
551
552 rc = usb_ep_queue(ep, req, GFP_KERNEL);
553 if (rc) {
554
555 /* We can't do much more than wait for a reset */
556 req->status = rc;
557
558 /*
559 * Note: currently the net2280 driver fails zero-length
560 * submissions if DMA is enabled.
561 */
562 if (rc != -ESHUTDOWN &&
563 !(rc == -EOPNOTSUPP && req->length == 0))
564 WARNING(fsg, "error in submission: %s --> %d\n",
565 ep->name, rc);
566 }
567 return rc;
568 }
569
570 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
571 {
572 if (!fsg_is_set(common))
573 return false;
574 bh->state = BUF_STATE_SENDING;
575 if (start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq))
576 bh->state = BUF_STATE_EMPTY;
577 return true;
578 }
579
580 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
581 {
582 if (!fsg_is_set(common))
583 return false;
584 bh->state = BUF_STATE_RECEIVING;
585 if (start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq))
586 bh->state = BUF_STATE_FULL;
587 return true;
588 }
589
590 static int sleep_thread(struct fsg_common *common, bool can_freeze,
591 struct fsg_buffhd *bh)
592 {
593 int rc;
594
595 /* Wait until a signal arrives or bh is no longer busy */
596 if (can_freeze)
597 /*
598 * synchronize with the smp_store_release(&bh->state) in
599 * bulk_in_complete() or bulk_out_complete()
600 */
601 rc = wait_event_freezable(common->io_wait,
602 bh && smp_load_acquire(&bh->state) >=
603 BUF_STATE_EMPTY);
604 else
605 rc = wait_event_interruptible(common->io_wait,
606 bh && smp_load_acquire(&bh->state) >=
607 BUF_STATE_EMPTY);
608 return rc ? -EINTR : 0;
609 }
610
611
612 /*-------------------------------------------------------------------------*/
613
614 static int do_read(struct fsg_common *common)
615 {
616 struct fsg_lun *curlun = common->curlun;
617 u32 lba;
618 struct fsg_buffhd *bh;
619 int rc;
620 u32 amount_left;
621 loff_t file_offset, file_offset_tmp;
622 unsigned int amount;
623 ssize_t nread;
624
625 /*
626 * Get the starting Logical Block Address and check that it's
627 * not too big.
628 */
629 if (common->cmnd[0] == READ_6)
630 lba = get_unaligned_be24(&common->cmnd[1]);
631 else {
632 lba = get_unaligned_be32(&common->cmnd[2]);
633
634 /*
635 * We allow DPO (Disable Page Out = don't save data in the
636 * cache) and FUA (Force Unit Access = don't read from the
637 * cache), but we don't implement them.
638 */
639 if ((common->cmnd[1] & ~0x18) != 0) {
640 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
641 return -EINVAL;
642 }
643 }
644 if (lba >= curlun->num_sectors) {
645 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
646 return -EINVAL;
647 }
648 file_offset = ((loff_t) lba) << curlun->blkbits;
649
650 /* Carry out the file reads */
651 amount_left = common->data_size_from_cmnd;
652 if (unlikely(amount_left == 0))
653 return -EIO; /* No default reply */
654
655 for (;;) {
656 /*
657 * Figure out how much we need to read:
658 * Try to read the remaining amount.
659 * But don't read more than the buffer size.
660 * And don't try to read past the end of the file.
661 */
662 amount = min(amount_left, FSG_BUFLEN);
663 amount = min((loff_t)amount,
664 curlun->file_length - file_offset);
665
666 /* Wait for the next buffer to become available */
667 bh = common->next_buffhd_to_fill;
668 rc = sleep_thread(common, false, bh);
669 if (rc)
670 return rc;
671
672 /*
673 * If we were asked to read past the end of file,
674 * end with an empty buffer.
675 */
676 if (amount == 0) {
677 curlun->sense_data =
678 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
679 curlun->sense_data_info =
680 file_offset >> curlun->blkbits;
681 curlun->info_valid = 1;
682 bh->inreq->length = 0;
683 bh->state = BUF_STATE_FULL;
684 break;
685 }
686
687 /* Perform the read */
688 file_offset_tmp = file_offset;
689 nread = vfs_read(curlun->filp,
690 (char __user *)bh->buf,
691 amount, &file_offset_tmp);
692 VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
693 (unsigned long long)file_offset, (int)nread);
694 if (signal_pending(current))
695 return -EINTR;
696
697 if (nread < 0) {
698 LDBG(curlun, "error in file read: %d\n", (int)nread);
699 nread = 0;
700 } else if (nread < amount) {
701 LDBG(curlun, "partial file read: %d/%u\n",
702 (int)nread, amount);
703 nread = round_down(nread, curlun->blksize);
704 }
705 file_offset += nread;
706 amount_left -= nread;
707 common->residue -= nread;
708
709 /*
710 * Except at the end of the transfer, nread will be
711 * equal to the buffer size, which is divisible by the
712 * bulk-in maxpacket size.
713 */
714 bh->inreq->length = nread;
715 bh->state = BUF_STATE_FULL;
716
717 /* If an error occurred, report it and its position */
718 if (nread < amount) {
719 curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
720 curlun->sense_data_info =
721 file_offset >> curlun->blkbits;
722 curlun->info_valid = 1;
723 break;
724 }
725
726 if (amount_left == 0)
727 break; /* No more left to read */
728
729 /* Send this buffer and go read some more */
730 bh->inreq->zero = 0;
731 if (!start_in_transfer(common, bh))
732 /* Don't know what to do if common->fsg is NULL */
733 return -EIO;
734 common->next_buffhd_to_fill = bh->next;
735 }
736
737 return -EIO; /* No default reply */
738 }
739
740
741 /*-------------------------------------------------------------------------*/
742
743 static int do_write(struct fsg_common *common)
744 {
745 struct fsg_lun *curlun = common->curlun;
746 u32 lba;
747 struct fsg_buffhd *bh;
748 int get_some_more;
749 u32 amount_left_to_req, amount_left_to_write;
750 loff_t usb_offset, file_offset, file_offset_tmp;
751 unsigned int amount;
752 ssize_t nwritten;
753 int rc;
754
755 if (curlun->ro) {
756 curlun->sense_data = SS_WRITE_PROTECTED;
757 return -EINVAL;
758 }
759 spin_lock(&curlun->filp->f_lock);
760 curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */
761 spin_unlock(&curlun->filp->f_lock);
762
763 /*
764 * Get the starting Logical Block Address and check that it's
765 * not too big
766 */
767 if (common->cmnd[0] == WRITE_6)
768 lba = get_unaligned_be24(&common->cmnd[1]);
769 else {
770 lba = get_unaligned_be32(&common->cmnd[2]);
771
772 /*
773 * We allow DPO (Disable Page Out = don't save data in the
774 * cache) and FUA (Force Unit Access = write directly to the
775 * medium). We don't implement DPO; we implement FUA by
776 * performing synchronous output.
777 */
778 if (common->cmnd[1] & ~0x18) {
779 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
780 return -EINVAL;
781 }
782 if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
783 spin_lock(&curlun->filp->f_lock);
784 curlun->filp->f_flags |= O_SYNC;
785 spin_unlock(&curlun->filp->f_lock);
786 }
787 }
788 if (lba >= curlun->num_sectors) {
789 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
790 return -EINVAL;
791 }
792
793 /* Carry out the file writes */
794 get_some_more = 1;
795 file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
796 amount_left_to_req = common->data_size_from_cmnd;
797 amount_left_to_write = common->data_size_from_cmnd;
798
799 while (amount_left_to_write > 0) {
800
801 /* Queue a request for more data from the host */
802 bh = common->next_buffhd_to_fill;
803 if (bh->state == BUF_STATE_EMPTY && get_some_more) {
804
805 /*
806 * Figure out how much we want to get:
807 * Try to get the remaining amount,
808 * but not more than the buffer size.
809 */
810 amount = min(amount_left_to_req, FSG_BUFLEN);
811
812 /* Beyond the end of the backing file? */
813 if (usb_offset >= curlun->file_length) {
814 get_some_more = 0;
815 curlun->sense_data =
816 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
817 curlun->sense_data_info =
818 usb_offset >> curlun->blkbits;
819 curlun->info_valid = 1;
820 continue;
821 }
822
823 /* Get the next buffer */
824 usb_offset += amount;
825 common->usb_amount_left -= amount;
826 amount_left_to_req -= amount;
827 if (amount_left_to_req == 0)
828 get_some_more = 0;
829
830 /*
831 * Except at the end of the transfer, amount will be
832 * equal to the buffer size, which is divisible by
833 * the bulk-out maxpacket size.
834 */
835 set_bulk_out_req_length(common, bh, amount);
836 if (!start_out_transfer(common, bh))
837 /* Dunno what to do if common->fsg is NULL */
838 return -EIO;
839 common->next_buffhd_to_fill = bh->next;
840 continue;
841 }
842
843 /* Write the received data to the backing file */
844 bh = common->next_buffhd_to_drain;
845 if (bh->state == BUF_STATE_EMPTY && !get_some_more)
846 break; /* We stopped early */
847
848 /* Wait for the data to be received */
849 rc = sleep_thread(common, false, bh);
850 if (rc)
851 return rc;
852
853 common->next_buffhd_to_drain = bh->next;
854 bh->state = BUF_STATE_EMPTY;
855
856 /* Did something go wrong with the transfer? */
857 if (bh->outreq->status != 0) {
858 curlun->sense_data = SS_COMMUNICATION_FAILURE;
859 curlun->sense_data_info =
860 file_offset >> curlun->blkbits;
861 curlun->info_valid = 1;
862 break;
863 }
864
865 amount = bh->outreq->actual;
866 if (curlun->file_length - file_offset < amount) {
867 LERROR(curlun, "write %u @ %llu beyond end %llu\n",
868 amount, (unsigned long long)file_offset,
869 (unsigned long long)curlun->file_length);
870 amount = curlun->file_length - file_offset;
871 }
872
873 /*
874 * Don't accept excess data. The spec doesn't say
875 * what to do in this case. We'll ignore the error.
876 */
877 amount = min(amount, bh->bulk_out_intended_length);
878
879 /* Don't write a partial block */
880 amount = round_down(amount, curlun->blksize);
881 if (amount == 0)
882 goto empty_write;
883
884 /* Perform the write */
885 file_offset_tmp = file_offset;
886 nwritten = vfs_write(curlun->filp, (char __user *)bh->buf,
887 amount, &file_offset_tmp);
888 VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
889 (unsigned long long)file_offset, (int)nwritten);
890 if (signal_pending(current))
891 return -EINTR; /* Interrupted! */
892
893 if (nwritten < 0) {
894 LDBG(curlun, "error in file write: %d\n",
895 (int) nwritten);
896 nwritten = 0;
897 } else if (nwritten < amount) {
898 LDBG(curlun, "partial file write: %d/%u\n",
899 (int) nwritten, amount);
900 nwritten = round_down(nwritten, curlun->blksize);
901 }
902 file_offset += nwritten;
903 amount_left_to_write -= nwritten;
904 common->residue -= nwritten;
905
906 /* If an error occurred, report it and its position */
907 if (nwritten < amount) {
908 curlun->sense_data = SS_WRITE_ERROR;
909 curlun->sense_data_info =
910 file_offset >> curlun->blkbits;
911 curlun->info_valid = 1;
912 break;
913 }
914
915 empty_write:
916 /* Did the host decide to stop early? */
917 if (bh->outreq->actual < bh->bulk_out_intended_length) {
918 common->short_packet_received = 1;
919 break;
920 }
921 }
922
923 return -EIO; /* No default reply */
924 }
925
926
927 /*-------------------------------------------------------------------------*/
928
929 static int do_synchronize_cache(struct fsg_common *common)
930 {
931 struct fsg_lun *curlun = common->curlun;
932 int rc;
933
934 /* We ignore the requested LBA and write out all file's
935 * dirty data buffers. */
936 rc = fsg_lun_fsync_sub(curlun);
937 if (rc)
938 curlun->sense_data = SS_WRITE_ERROR;
939 return 0;
940 }
941
942
943 /*-------------------------------------------------------------------------*/
944
945 static void invalidate_sub(struct fsg_lun *curlun)
946 {
947 struct file *filp = curlun->filp;
948 struct inode *inode = file_inode(filp);
949 unsigned long rc;
950
951 rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
952 VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
953 }
954
955 static int do_verify(struct fsg_common *common)
956 {
957 struct fsg_lun *curlun = common->curlun;
958 u32 lba;
959 u32 verification_length;
960 struct fsg_buffhd *bh = common->next_buffhd_to_fill;
961 loff_t file_offset, file_offset_tmp;
962 u32 amount_left;
963 unsigned int amount;
964 ssize_t nread;
965
966 /*
967 * Get the starting Logical Block Address and check that it's
968 * not too big.
969 */
970 lba = get_unaligned_be32(&common->cmnd[2]);
971 if (lba >= curlun->num_sectors) {
972 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
973 return -EINVAL;
974 }
975
976 /*
977 * We allow DPO (Disable Page Out = don't save data in the
978 * cache) but we don't implement it.
979 */
980 if (common->cmnd[1] & ~0x10) {
981 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
982 return -EINVAL;
983 }
984
985 verification_length = get_unaligned_be16(&common->cmnd[7]);
986 if (unlikely(verification_length == 0))
987 return -EIO; /* No default reply */
988
989 /* Prepare to carry out the file verify */
990 amount_left = verification_length << curlun->blkbits;
991 file_offset = ((loff_t) lba) << curlun->blkbits;
992
993 /* Write out all the dirty buffers before invalidating them */
994 fsg_lun_fsync_sub(curlun);
995 if (signal_pending(current))
996 return -EINTR;
997
998 invalidate_sub(curlun);
999 if (signal_pending(current))
1000 return -EINTR;
1001
1002 /* Just try to read the requested blocks */
1003 while (amount_left > 0) {
1004 /*
1005 * Figure out how much we need to read:
1006 * Try to read the remaining amount, but not more than
1007 * the buffer size.
1008 * And don't try to read past the end of the file.
1009 */
1010 amount = min(amount_left, FSG_BUFLEN);
1011 amount = min((loff_t)amount,
1012 curlun->file_length - file_offset);
1013 if (amount == 0) {
1014 curlun->sense_data =
1015 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1016 curlun->sense_data_info =
1017 file_offset >> curlun->blkbits;
1018 curlun->info_valid = 1;
1019 break;
1020 }
1021
1022 /* Perform the read */
1023 file_offset_tmp = file_offset;
1024 nread = vfs_read(curlun->filp,
1025 (char __user *) bh->buf,
1026 amount, &file_offset_tmp);
1027 VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
1028 (unsigned long long) file_offset,
1029 (int) nread);
1030 if (signal_pending(current))
1031 return -EINTR;
1032
1033 if (nread < 0) {
1034 LDBG(curlun, "error in file verify: %d\n", (int)nread);
1035 nread = 0;
1036 } else if (nread < amount) {
1037 LDBG(curlun, "partial file verify: %d/%u\n",
1038 (int)nread, amount);
1039 nread = round_down(nread, curlun->blksize);
1040 }
1041 if (nread == 0) {
1042 curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
1043 curlun->sense_data_info =
1044 file_offset >> curlun->blkbits;
1045 curlun->info_valid = 1;
1046 break;
1047 }
1048 file_offset += nread;
1049 amount_left -= nread;
1050 }
1051 return 0;
1052 }
1053
1054
1055 /*-------------------------------------------------------------------------*/
1056
1057 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
1058 {
1059 struct fsg_lun *curlun = common->curlun;
1060 u8 *buf = (u8 *) bh->buf;
1061
1062 if (!curlun) { /* Unsupported LUNs are okay */
1063 common->bad_lun_okay = 1;
1064 memset(buf, 0, 36);
1065 buf[0] = TYPE_NO_LUN; /* Unsupported, no device-type */
1066 buf[4] = 31; /* Additional length */
1067 return 36;
1068 }
1069
1070 buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
1071 buf[1] = curlun->removable ? 0x80 : 0;
1072 buf[2] = 2; /* ANSI SCSI level 2 */
1073 buf[3] = 2; /* SCSI-2 INQUIRY data format */
1074 buf[4] = 31; /* Additional length */
1075 buf[5] = 0; /* No special options */
1076 buf[6] = 0;
1077 buf[7] = 0;
1078 if (curlun->inquiry_string[0])
1079 memcpy(buf + 8, curlun->inquiry_string,
1080 sizeof(curlun->inquiry_string));
1081 else
1082 memcpy(buf + 8, common->inquiry_string,
1083 sizeof(common->inquiry_string));
1084 return 36;
1085 }
1086
1087 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1088 {
1089 struct fsg_lun *curlun = common->curlun;
1090 u8 *buf = (u8 *) bh->buf;
1091 u32 sd, sdinfo;
1092 int valid;
1093
1094 /*
1095 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
1096 *
1097 * If a REQUEST SENSE command is received from an initiator
1098 * with a pending unit attention condition (before the target
1099 * generates the contingent allegiance condition), then the
1100 * target shall either:
1101 * a) report any pending sense data and preserve the unit
1102 * attention condition on the logical unit, or,
1103 * b) report the unit attention condition, may discard any
1104 * pending sense data, and clear the unit attention
1105 * condition on the logical unit for that initiator.
1106 *
1107 * FSG normally uses option a); enable this code to use option b).
1108 */
1109 #if 0
1110 if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
1111 curlun->sense_data = curlun->unit_attention_data;
1112 curlun->unit_attention_data = SS_NO_SENSE;
1113 }
1114 #endif
1115
1116 if (!curlun) { /* Unsupported LUNs are okay */
1117 common->bad_lun_okay = 1;
1118 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1119 sdinfo = 0;
1120 valid = 0;
1121 } else {
1122 sd = curlun->sense_data;
1123 sdinfo = curlun->sense_data_info;
1124 valid = curlun->info_valid << 7;
1125 curlun->sense_data = SS_NO_SENSE;
1126 curlun->sense_data_info = 0;
1127 curlun->info_valid = 0;
1128 }
1129
1130 memset(buf, 0, 18);
1131 buf[0] = valid | 0x70; /* Valid, current error */
1132 buf[2] = SK(sd);
1133 put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
1134 buf[7] = 18 - 8; /* Additional sense length */
1135 buf[12] = ASC(sd);
1136 buf[13] = ASCQ(sd);
1137 return 18;
1138 }
1139
1140 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
1141 {
1142 struct fsg_lun *curlun = common->curlun;
1143 u32 lba = get_unaligned_be32(&common->cmnd[2]);
1144 int pmi = common->cmnd[8];
1145 u8 *buf = (u8 *)bh->buf;
1146
1147 /* Check the PMI and LBA fields */
1148 if (pmi > 1 || (pmi == 0 && lba != 0)) {
1149 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1150 return -EINVAL;
1151 }
1152
1153 put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
1154 /* Max logical block */
1155 put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1156 return 8;
1157 }
1158
1159 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
1160 {
1161 struct fsg_lun *curlun = common->curlun;
1162 int msf = common->cmnd[1] & 0x02;
1163 u32 lba = get_unaligned_be32(&common->cmnd[2]);
1164 u8 *buf = (u8 *)bh->buf;
1165
1166 if (common->cmnd[1] & ~0x02) { /* Mask away MSF */
1167 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1168 return -EINVAL;
1169 }
1170 if (lba >= curlun->num_sectors) {
1171 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1172 return -EINVAL;
1173 }
1174
1175 memset(buf, 0, 8);
1176 buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */
1177 store_cdrom_address(&buf[4], msf, lba);
1178 return 8;
1179 }
1180
1181 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
1182 {
1183 struct fsg_lun *curlun = common->curlun;
1184 int msf = common->cmnd[1] & 0x02;
1185 int start_track = common->cmnd[6];
1186 u8 *buf = (u8 *)bh->buf;
1187
1188 if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */
1189 start_track > 1) {
1190 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1191 return -EINVAL;
1192 }
1193
1194 memset(buf, 0, 20);
1195 buf[1] = (20-2); /* TOC data length */
1196 buf[2] = 1; /* First track number */
1197 buf[3] = 1; /* Last track number */
1198 buf[5] = 0x16; /* Data track, copying allowed */
1199 buf[6] = 0x01; /* Only track is number 1 */
1200 store_cdrom_address(&buf[8], msf, 0);
1201
1202 buf[13] = 0x16; /* Lead-out track is data */
1203 buf[14] = 0xAA; /* Lead-out track number */
1204 store_cdrom_address(&buf[16], msf, curlun->num_sectors);
1205 return 20;
1206 }
1207
1208 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1209 {
1210 struct fsg_lun *curlun = common->curlun;
1211 int mscmnd = common->cmnd[0];
1212 u8 *buf = (u8 *) bh->buf;
1213 u8 *buf0 = buf;
1214 int pc, page_code;
1215 int changeable_values, all_pages;
1216 int valid_page = 0;
1217 int len, limit;
1218
1219 if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */
1220 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1221 return -EINVAL;
1222 }
1223 pc = common->cmnd[2] >> 6;
1224 page_code = common->cmnd[2] & 0x3f;
1225 if (pc == 3) {
1226 curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
1227 return -EINVAL;
1228 }
1229 changeable_values = (pc == 1);
1230 all_pages = (page_code == 0x3f);
1231
1232 /*
1233 * Write the mode parameter header. Fixed values are: default
1234 * medium type, no cache control (DPOFUA), and no block descriptors.
1235 * The only variable value is the WriteProtect bit. We will fill in
1236 * the mode data length later.
1237 */
1238 memset(buf, 0, 8);
1239 if (mscmnd == MODE_SENSE) {
1240 buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
1241 buf += 4;
1242 limit = 255;
1243 } else { /* MODE_SENSE_10 */
1244 buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
1245 buf += 8;
1246 limit = 65535; /* Should really be FSG_BUFLEN */
1247 }
1248
1249 /* No block descriptors */
1250
1251 /*
1252 * The mode pages, in numerical order. The only page we support
1253 * is the Caching page.
1254 */
1255 if (page_code == 0x08 || all_pages) {
1256 valid_page = 1;
1257 buf[0] = 0x08; /* Page code */
1258 buf[1] = 10; /* Page length */
1259 memset(buf+2, 0, 10); /* None of the fields are changeable */
1260
1261 if (!changeable_values) {
1262 buf[2] = 0x04; /* Write cache enable, */
1263 /* Read cache not disabled */
1264 /* No cache retention priorities */
1265 put_unaligned_be16(0xffff, &buf[4]);
1266 /* Don't disable prefetch */
1267 /* Minimum prefetch = 0 */
1268 put_unaligned_be16(0xffff, &buf[8]);
1269 /* Maximum prefetch */
1270 put_unaligned_be16(0xffff, &buf[10]);
1271 /* Maximum prefetch ceiling */
1272 }
1273 buf += 12;
1274 }
1275
1276 /*
1277 * Check that a valid page was requested and the mode data length
1278 * isn't too long.
1279 */
1280 len = buf - buf0;
1281 if (!valid_page || len > limit) {
1282 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1283 return -EINVAL;
1284 }
1285
1286 /* Store the mode data length */
1287 if (mscmnd == MODE_SENSE)
1288 buf0[0] = len - 1;
1289 else
1290 put_unaligned_be16(len - 2, buf0);
1291 return len;
1292 }
1293
1294 static int do_start_stop(struct fsg_common *common)
1295 {
1296 struct fsg_lun *curlun = common->curlun;
1297 int loej, start;
1298
1299 if (!curlun) {
1300 return -EINVAL;
1301 } else if (!curlun->removable) {
1302 curlun->sense_data = SS_INVALID_COMMAND;
1303 return -EINVAL;
1304 } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
1305 (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
1306 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1307 return -EINVAL;
1308 }
1309
1310 loej = common->cmnd[4] & 0x02;
1311 start = common->cmnd[4] & 0x01;
1312
1313 /*
1314 * Our emulation doesn't support mounting; the medium is
1315 * available for use as soon as it is loaded.
1316 */
1317 if (start) {
1318 if (!fsg_lun_is_open(curlun)) {
1319 curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1320 return -EINVAL;
1321 }
1322 return 0;
1323 }
1324
1325 /* Are we allowed to unload the media? */
1326 if (curlun->prevent_medium_removal) {
1327 LDBG(curlun, "unload attempt prevented\n");
1328 curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
1329 return -EINVAL;
1330 }
1331
1332 if (!loej)
1333 return 0;
1334
1335 up_read(&common->filesem);
1336 down_write(&common->filesem);
1337 fsg_lun_close(curlun);
1338 up_write(&common->filesem);
1339 down_read(&common->filesem);
1340
1341 return 0;
1342 }
1343
1344 static int do_prevent_allow(struct fsg_common *common)
1345 {
1346 struct fsg_lun *curlun = common->curlun;
1347 int prevent;
1348
1349 if (!common->curlun) {
1350 return -EINVAL;
1351 } else if (!common->curlun->removable) {
1352 common->curlun->sense_data = SS_INVALID_COMMAND;
1353 return -EINVAL;
1354 }
1355
1356 prevent = common->cmnd[4] & 0x01;
1357 if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */
1358 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1359 return -EINVAL;
1360 }
1361
1362 if (curlun->prevent_medium_removal && !prevent)
1363 fsg_lun_fsync_sub(curlun);
1364 curlun->prevent_medium_removal = prevent;
1365 return 0;
1366 }
1367
1368 static int do_read_format_capacities(struct fsg_common *common,
1369 struct fsg_buffhd *bh)
1370 {
1371 struct fsg_lun *curlun = common->curlun;
1372 u8 *buf = (u8 *) bh->buf;
1373
1374 buf[0] = buf[1] = buf[2] = 0;
1375 buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */
1376 buf += 4;
1377
1378 put_unaligned_be32(curlun->num_sectors, &buf[0]);
1379 /* Number of blocks */
1380 put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1381 buf[4] = 0x02; /* Current capacity */
1382 return 12;
1383 }
1384
1385 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
1386 {
1387 struct fsg_lun *curlun = common->curlun;
1388
1389 /* We don't support MODE SELECT */
1390 if (curlun)
1391 curlun->sense_data = SS_INVALID_COMMAND;
1392 return -EINVAL;
1393 }
1394
1395
1396 /*-------------------------------------------------------------------------*/
1397
1398 static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
1399 {
1400 int rc;
1401
1402 rc = fsg_set_halt(fsg, fsg->bulk_in);
1403 if (rc == -EAGAIN)
1404 VDBG(fsg, "delayed bulk-in endpoint halt\n");
1405 while (rc != 0) {
1406 if (rc != -EAGAIN) {
1407 WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
1408 rc = 0;
1409 break;
1410 }
1411
1412 /* Wait for a short time and then try again */
1413 if (msleep_interruptible(100) != 0)
1414 return -EINTR;
1415 rc = usb_ep_set_halt(fsg->bulk_in);
1416 }
1417 return rc;
1418 }
1419
1420 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
1421 {
1422 int rc;
1423
1424 DBG(fsg, "bulk-in set wedge\n");
1425 rc = usb_ep_set_wedge(fsg->bulk_in);
1426 if (rc == -EAGAIN)
1427 VDBG(fsg, "delayed bulk-in endpoint wedge\n");
1428 while (rc != 0) {
1429 if (rc != -EAGAIN) {
1430 WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
1431 rc = 0;
1432 break;
1433 }
1434
1435 /* Wait for a short time and then try again */
1436 if (msleep_interruptible(100) != 0)
1437 return -EINTR;
1438 rc = usb_ep_set_wedge(fsg->bulk_in);
1439 }
1440 return rc;
1441 }
1442
1443 static int throw_away_data(struct fsg_common *common)
1444 {
1445 struct fsg_buffhd *bh, *bh2;
1446 u32 amount;
1447 int rc;
1448
1449 for (bh = common->next_buffhd_to_drain;
1450 bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
1451 bh = common->next_buffhd_to_drain) {
1452
1453 /* Try to submit another request if we need one */
1454 bh2 = common->next_buffhd_to_fill;
1455 if (bh2->state == BUF_STATE_EMPTY &&
1456 common->usb_amount_left > 0) {
1457 amount = min(common->usb_amount_left, FSG_BUFLEN);
1458
1459 /*
1460 * Except at the end of the transfer, amount will be
1461 * equal to the buffer size, which is divisible by
1462 * the bulk-out maxpacket size.
1463 */
1464 set_bulk_out_req_length(common, bh2, amount);
1465 if (!start_out_transfer(common, bh2))
1466 /* Dunno what to do if common->fsg is NULL */
1467 return -EIO;
1468 common->next_buffhd_to_fill = bh2->next;
1469 common->usb_amount_left -= amount;
1470 continue;
1471 }
1472
1473 /* Wait for the data to be received */
1474 rc = sleep_thread(common, false, bh);
1475 if (rc)
1476 return rc;
1477
1478 /* Throw away the data in a filled buffer */
1479 bh->state = BUF_STATE_EMPTY;
1480 common->next_buffhd_to_drain = bh->next;
1481
1482 /* A short packet or an error ends everything */
1483 if (bh->outreq->actual < bh->bulk_out_intended_length ||
1484 bh->outreq->status != 0) {
1485 raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1486 return -EINTR;
1487 }
1488 }
1489 return 0;
1490 }
1491
1492 static int finish_reply(struct fsg_common *common)
1493 {
1494 struct fsg_buffhd *bh = common->next_buffhd_to_fill;
1495 int rc = 0;
1496
1497 switch (common->data_dir) {
1498 case DATA_DIR_NONE:
1499 break; /* Nothing to send */
1500
1501 /*
1502 * If we don't know whether the host wants to read or write,
1503 * this must be CB or CBI with an unknown command. We mustn't
1504 * try to send or receive any data. So stall both bulk pipes
1505 * if we can and wait for a reset.
1506 */
1507 case DATA_DIR_UNKNOWN:
1508 if (!common->can_stall) {
1509 /* Nothing */
1510 } else if (fsg_is_set(common)) {
1511 fsg_set_halt(common->fsg, common->fsg->bulk_out);
1512 rc = halt_bulk_in_endpoint(common->fsg);
1513 } else {
1514 /* Don't know what to do if common->fsg is NULL */
1515 rc = -EIO;
1516 }
1517 break;
1518
1519 /* All but the last buffer of data must have already been sent */
1520 case DATA_DIR_TO_HOST:
1521 if (common->data_size == 0) {
1522 /* Nothing to send */
1523
1524 /* Don't know what to do if common->fsg is NULL */
1525 } else if (!fsg_is_set(common)) {
1526 rc = -EIO;
1527
1528 /* If there's no residue, simply send the last buffer */
1529 } else if (common->residue == 0) {
1530 bh->inreq->zero = 0;
1531 if (!start_in_transfer(common, bh))
1532 return -EIO;
1533 common->next_buffhd_to_fill = bh->next;
1534
1535 /*
1536 * For Bulk-only, mark the end of the data with a short
1537 * packet. If we are allowed to stall, halt the bulk-in
1538 * endpoint. (Note: This violates the Bulk-Only Transport
1539 * specification, which requires us to pad the data if we
1540 * don't halt the endpoint. Presumably nobody will mind.)
1541 */
1542 } else {
1543 bh->inreq->zero = 1;
1544 if (!start_in_transfer(common, bh))
1545 rc = -EIO;
1546 common->next_buffhd_to_fill = bh->next;
1547 if (common->can_stall)
1548 rc = halt_bulk_in_endpoint(common->fsg);
1549 }
1550 break;
1551
1552 /*
1553 * We have processed all we want from the data the host has sent.
1554 * There may still be outstanding bulk-out requests.
1555 */
1556 case DATA_DIR_FROM_HOST:
1557 if (common->residue == 0) {
1558 /* Nothing to receive */
1559
1560 /* Did the host stop sending unexpectedly early? */
1561 } else if (common->short_packet_received) {
1562 raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1563 rc = -EINTR;
1564
1565 /*
1566 * We haven't processed all the incoming data. Even though
1567 * we may be allowed to stall, doing so would cause a race.
1568 * The controller may already have ACK'ed all the remaining
1569 * bulk-out packets, in which case the host wouldn't see a
1570 * STALL. Not realizing the endpoint was halted, it wouldn't
1571 * clear the halt -- leading to problems later on.
1572 */
1573 #if 0
1574 } else if (common->can_stall) {
1575 if (fsg_is_set(common))
1576 fsg_set_halt(common->fsg,
1577 common->fsg->bulk_out);
1578 raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1579 rc = -EINTR;
1580 #endif
1581
1582 /*
1583 * We can't stall. Read in the excess data and throw it
1584 * all away.
1585 */
1586 } else {
1587 rc = throw_away_data(common);
1588 }
1589 break;
1590 }
1591 return rc;
1592 }
1593
1594 static void send_status(struct fsg_common *common)
1595 {
1596 struct fsg_lun *curlun = common->curlun;
1597 struct fsg_buffhd *bh;
1598 struct bulk_cs_wrap *csw;
1599 int rc;
1600 u8 status = US_BULK_STAT_OK;
1601 u32 sd, sdinfo = 0;
1602
1603 /* Wait for the next buffer to become available */
1604 bh = common->next_buffhd_to_fill;
1605 rc = sleep_thread(common, false, bh);
1606 if (rc)
1607 return;
1608
1609 if (curlun) {
1610 sd = curlun->sense_data;
1611 sdinfo = curlun->sense_data_info;
1612 } else if (common->bad_lun_okay)
1613 sd = SS_NO_SENSE;
1614 else
1615 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1616
1617 if (common->phase_error) {
1618 DBG(common, "sending phase-error status\n");
1619 status = US_BULK_STAT_PHASE;
1620 sd = SS_INVALID_COMMAND;
1621 } else if (sd != SS_NO_SENSE) {
1622 DBG(common, "sending command-failure status\n");
1623 status = US_BULK_STAT_FAIL;
1624 VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
1625 " info x%x\n",
1626 SK(sd), ASC(sd), ASCQ(sd), sdinfo);
1627 }
1628
1629 /* Store and send the Bulk-only CSW */
1630 csw = (void *)bh->buf;
1631
1632 csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
1633 csw->Tag = common->tag;
1634 csw->Residue = cpu_to_le32(common->residue);
1635 csw->Status = status;
1636
1637 bh->inreq->length = US_BULK_CS_WRAP_LEN;
1638 bh->inreq->zero = 0;
1639 if (!start_in_transfer(common, bh))
1640 /* Don't know what to do if common->fsg is NULL */
1641 return;
1642
1643 common->next_buffhd_to_fill = bh->next;
1644 return;
1645 }
1646
1647
1648 /*-------------------------------------------------------------------------*/
1649
1650 /*
1651 * Check whether the command is properly formed and whether its data size
1652 * and direction agree with the values we already have.
1653 */
1654 static int check_command(struct fsg_common *common, int cmnd_size,
1655 enum data_direction data_dir, unsigned int mask,
1656 int needs_medium, const char *name)
1657 {
1658 int i;
1659 unsigned int lun = common->cmnd[1] >> 5;
1660 static const char dirletter[4] = {'u', 'o', 'i', 'n'};
1661 char hdlen[20];
1662 struct fsg_lun *curlun;
1663
1664 hdlen[0] = 0;
1665 if (common->data_dir != DATA_DIR_UNKNOWN)
1666 sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
1667 common->data_size);
1668 VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
1669 name, cmnd_size, dirletter[(int) data_dir],
1670 common->data_size_from_cmnd, common->cmnd_size, hdlen);
1671
1672 /*
1673 * We can't reply at all until we know the correct data direction
1674 * and size.
1675 */
1676 if (common->data_size_from_cmnd == 0)
1677 data_dir = DATA_DIR_NONE;
1678 if (common->data_size < common->data_size_from_cmnd) {
1679 /*
1680 * Host data size < Device data size is a phase error.
1681 * Carry out the command, but only transfer as much as
1682 * we are allowed.
1683 */
1684 common->data_size_from_cmnd = common->data_size;
1685 common->phase_error = 1;
1686 }
1687 common->residue = common->data_size;
1688 common->usb_amount_left = common->data_size;
1689
1690 /* Conflicting data directions is a phase error */
1691 if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
1692 common->phase_error = 1;
1693 return -EINVAL;
1694 }
1695
1696 /* Verify the length of the command itself */
1697 if (cmnd_size != common->cmnd_size) {
1698
1699 /*
1700 * Special case workaround: There are plenty of buggy SCSI
1701 * implementations. Many have issues with cbw->Length
1702 * field passing a wrong command size. For those cases we
1703 * always try to work around the problem by using the length
1704 * sent by the host side provided it is at least as large
1705 * as the correct command length.
1706 * Examples of such cases would be MS-Windows, which issues
1707 * REQUEST SENSE with cbw->Length == 12 where it should
1708 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
1709 * REQUEST SENSE with cbw->Length == 10 where it should
1710 * be 6 as well.
1711 */
1712 if (cmnd_size <= common->cmnd_size) {
1713 DBG(common, "%s is buggy! Expected length %d "
1714 "but we got %d\n", name,
1715 cmnd_size, common->cmnd_size);
1716 cmnd_size = common->cmnd_size;
1717 } else {
1718 common->phase_error = 1;
1719 return -EINVAL;
1720 }
1721 }
1722
1723 /* Check that the LUN values are consistent */
1724 if (common->lun != lun)
1725 DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
1726 common->lun, lun);
1727
1728 /* Check the LUN */
1729 curlun = common->curlun;
1730 if (curlun) {
1731 if (common->cmnd[0] != REQUEST_SENSE) {
1732 curlun->sense_data = SS_NO_SENSE;
1733 curlun->sense_data_info = 0;
1734 curlun->info_valid = 0;
1735 }
1736 } else {
1737 common->bad_lun_okay = 0;
1738
1739 /*
1740 * INQUIRY and REQUEST SENSE commands are explicitly allowed
1741 * to use unsupported LUNs; all others may not.
1742 */
1743 if (common->cmnd[0] != INQUIRY &&
1744 common->cmnd[0] != REQUEST_SENSE) {
1745 DBG(common, "unsupported LUN %u\n", common->lun);
1746 return -EINVAL;
1747 }
1748 }
1749
1750 /*
1751 * If a unit attention condition exists, only INQUIRY and
1752 * REQUEST SENSE commands are allowed; anything else must fail.
1753 */
1754 if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
1755 common->cmnd[0] != INQUIRY &&
1756 common->cmnd[0] != REQUEST_SENSE) {
1757 curlun->sense_data = curlun->unit_attention_data;
1758 curlun->unit_attention_data = SS_NO_SENSE;
1759 return -EINVAL;
1760 }
1761
1762 /* Check that only command bytes listed in the mask are non-zero */
1763 common->cmnd[1] &= 0x1f; /* Mask away the LUN */
1764 for (i = 1; i < cmnd_size; ++i) {
1765 if (common->cmnd[i] && !(mask & (1 << i))) {
1766 if (curlun)
1767 curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1768 return -EINVAL;
1769 }
1770 }
1771
1772 /* If the medium isn't mounted and the command needs to access
1773 * it, return an error. */
1774 if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
1775 curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1776 return -EINVAL;
1777 }
1778
1779 return 0;
1780 }
1781
1782 /* wrapper of check_command for data size in blocks handling */
1783 static int check_command_size_in_blocks(struct fsg_common *common,
1784 int cmnd_size, enum data_direction data_dir,
1785 unsigned int mask, int needs_medium, const char *name)
1786 {
1787 if (common->curlun)
1788 common->data_size_from_cmnd <<= common->curlun->blkbits;
1789 return check_command(common, cmnd_size, data_dir,
1790 mask, needs_medium, name);
1791 }
1792
1793 static int do_scsi_command(struct fsg_common *common)
1794 {
1795 struct fsg_buffhd *bh;
1796 int rc;
1797 int reply = -EINVAL;
1798 int i;
1799 static char unknown[16];
1800
1801 dump_cdb(common);
1802
1803 /* Wait for the next buffer to become available for data or status */
1804 bh = common->next_buffhd_to_fill;
1805 common->next_buffhd_to_drain = bh;
1806 rc = sleep_thread(common, false, bh);
1807 if (rc)
1808 return rc;
1809
1810 common->phase_error = 0;
1811 common->short_packet_received = 0;
1812
1813 down_read(&common->filesem); /* We're using the backing file */
1814 switch (common->cmnd[0]) {
1815
1816 case INQUIRY:
1817 common->data_size_from_cmnd = common->cmnd[4];
1818 reply = check_command(common, 6, DATA_DIR_TO_HOST,
1819 (1<<4), 0,
1820 "INQUIRY");
1821 if (reply == 0)
1822 reply = do_inquiry(common, bh);
1823 break;
1824
1825 case MODE_SELECT:
1826 common->data_size_from_cmnd = common->cmnd[4];
1827 reply = check_command(common, 6, DATA_DIR_FROM_HOST,
1828 (1<<1) | (1<<4), 0,
1829 "MODE SELECT(6)");
1830 if (reply == 0)
1831 reply = do_mode_select(common, bh);
1832 break;
1833
1834 case MODE_SELECT_10:
1835 common->data_size_from_cmnd =
1836 get_unaligned_be16(&common->cmnd[7]);
1837 reply = check_command(common, 10, DATA_DIR_FROM_HOST,
1838 (1<<1) | (3<<7), 0,
1839 "MODE SELECT(10)");
1840 if (reply == 0)
1841 reply = do_mode_select(common, bh);
1842 break;
1843
1844 case MODE_SENSE:
1845 common->data_size_from_cmnd = common->cmnd[4];
1846 reply = check_command(common, 6, DATA_DIR_TO_HOST,
1847 (1<<1) | (1<<2) | (1<<4), 0,
1848 "MODE SENSE(6)");
1849 if (reply == 0)
1850 reply = do_mode_sense(common, bh);
1851 break;
1852
1853 case MODE_SENSE_10:
1854 common->data_size_from_cmnd =
1855 get_unaligned_be16(&common->cmnd[7]);
1856 reply = check_command(common, 10, DATA_DIR_TO_HOST,
1857 (1<<1) | (1<<2) | (3<<7), 0,
1858 "MODE SENSE(10)");
1859 if (reply == 0)
1860 reply = do_mode_sense(common, bh);
1861 break;
1862
1863 case ALLOW_MEDIUM_REMOVAL:
1864 common->data_size_from_cmnd = 0;
1865 reply = check_command(common, 6, DATA_DIR_NONE,
1866 (1<<4), 0,
1867 "PREVENT-ALLOW MEDIUM REMOVAL");
1868 if (reply == 0)
1869 reply = do_prevent_allow(common);
1870 break;
1871
1872 case READ_6:
1873 i = common->cmnd[4];
1874 common->data_size_from_cmnd = (i == 0) ? 256 : i;
1875 reply = check_command_size_in_blocks(common, 6,
1876 DATA_DIR_TO_HOST,
1877 (7<<1) | (1<<4), 1,
1878 "READ(6)");
1879 if (reply == 0)
1880 reply = do_read(common);
1881 break;
1882
1883 case READ_10:
1884 common->data_size_from_cmnd =
1885 get_unaligned_be16(&common->cmnd[7]);
1886 reply = check_command_size_in_blocks(common, 10,
1887 DATA_DIR_TO_HOST,
1888 (1<<1) | (0xf<<2) | (3<<7), 1,
1889 "READ(10)");
1890 if (reply == 0)
1891 reply = do_read(common);
1892 break;
1893
1894 case READ_12:
1895 common->data_size_from_cmnd =
1896 get_unaligned_be32(&common->cmnd[6]);
1897 reply = check_command_size_in_blocks(common, 12,
1898 DATA_DIR_TO_HOST,
1899 (1<<1) | (0xf<<2) | (0xf<<6), 1,
1900 "READ(12)");
1901 if (reply == 0)
1902 reply = do_read(common);
1903 break;
1904
1905 case READ_CAPACITY:
1906 common->data_size_from_cmnd = 8;
1907 reply = check_command(common, 10, DATA_DIR_TO_HOST,
1908 (0xf<<2) | (1<<8), 1,
1909 "READ CAPACITY");
1910 if (reply == 0)
1911 reply = do_read_capacity(common, bh);
1912 break;
1913
1914 case READ_HEADER:
1915 if (!common->curlun || !common->curlun->cdrom)
1916 goto unknown_cmnd;
1917 common->data_size_from_cmnd =
1918 get_unaligned_be16(&common->cmnd[7]);
1919 reply = check_command(common, 10, DATA_DIR_TO_HOST,
1920 (3<<7) | (0x1f<<1), 1,
1921 "READ HEADER");
1922 if (reply == 0)
1923 reply = do_read_header(common, bh);
1924 break;
1925
1926 case READ_TOC:
1927 if (!common->curlun || !common->curlun->cdrom)
1928 goto unknown_cmnd;
1929 common->data_size_from_cmnd =
1930 get_unaligned_be16(&common->cmnd[7]);
1931 reply = check_command(common, 10, DATA_DIR_TO_HOST,
1932 (7<<6) | (1<<1), 1,
1933 "READ TOC");
1934 if (reply == 0)
1935 reply = do_read_toc(common, bh);
1936 break;
1937
1938 case READ_FORMAT_CAPACITIES:
1939 common->data_size_from_cmnd =
1940 get_unaligned_be16(&common->cmnd[7]);
1941 reply = check_command(common, 10, DATA_DIR_TO_HOST,
1942 (3<<7), 1,
1943 "READ FORMAT CAPACITIES");
1944 if (reply == 0)
1945 reply = do_read_format_capacities(common, bh);
1946 break;
1947
1948 case REQUEST_SENSE:
1949 common->data_size_from_cmnd = common->cmnd[4];
1950 reply = check_command(common, 6, DATA_DIR_TO_HOST,
1951 (1<<4), 0,
1952 "REQUEST SENSE");
1953 if (reply == 0)
1954 reply = do_request_sense(common, bh);
1955 break;
1956
1957 case START_STOP:
1958 common->data_size_from_cmnd = 0;
1959 reply = check_command(common, 6, DATA_DIR_NONE,
1960 (1<<1) | (1<<4), 0,
1961 "START-STOP UNIT");
1962 if (reply == 0)
1963 reply = do_start_stop(common);
1964 break;
1965
1966 case SYNCHRONIZE_CACHE:
1967 common->data_size_from_cmnd = 0;
1968 reply = check_command(common, 10, DATA_DIR_NONE,
1969 (0xf<<2) | (3<<7), 1,
1970 "SYNCHRONIZE CACHE");
1971 if (reply == 0)
1972 reply = do_synchronize_cache(common);
1973 break;
1974
1975 case TEST_UNIT_READY:
1976 common->data_size_from_cmnd = 0;
1977 reply = check_command(common, 6, DATA_DIR_NONE,
1978 0, 1,
1979 "TEST UNIT READY");
1980 break;
1981
1982 /*
1983 * Although optional, this command is used by MS-Windows. We
1984 * support a minimal version: BytChk must be 0.
1985 */
1986 case VERIFY:
1987 common->data_size_from_cmnd = 0;
1988 reply = check_command(common, 10, DATA_DIR_NONE,
1989 (1<<1) | (0xf<<2) | (3<<7), 1,
1990 "VERIFY");
1991 if (reply == 0)
1992 reply = do_verify(common);
1993 break;
1994
1995 case WRITE_6:
1996 i = common->cmnd[4];
1997 common->data_size_from_cmnd = (i == 0) ? 256 : i;
1998 reply = check_command_size_in_blocks(common, 6,
1999 DATA_DIR_FROM_HOST,
2000 (7<<1) | (1<<4), 1,
2001 "WRITE(6)");
2002 if (reply == 0)
2003 reply = do_write(common);
2004 break;
2005
2006 case WRITE_10:
2007 common->data_size_from_cmnd =
2008 get_unaligned_be16(&common->cmnd[7]);
2009 reply = check_command_size_in_blocks(common, 10,
2010 DATA_DIR_FROM_HOST,
2011 (1<<1) | (0xf<<2) | (3<<7), 1,
2012 "WRITE(10)");
2013 if (reply == 0)
2014 reply = do_write(common);
2015 break;
2016
2017 case WRITE_12:
2018 common->data_size_from_cmnd =
2019 get_unaligned_be32(&common->cmnd[6]);
2020 reply = check_command_size_in_blocks(common, 12,
2021 DATA_DIR_FROM_HOST,
2022 (1<<1) | (0xf<<2) | (0xf<<6), 1,
2023 "WRITE(12)");
2024 if (reply == 0)
2025 reply = do_write(common);
2026 break;
2027
2028 /*
2029 * Some mandatory commands that we recognize but don't implement.
2030 * They don't mean much in this setting. It's left as an exercise
2031 * for anyone interested to implement RESERVE and RELEASE in terms
2032 * of Posix locks.
2033 */
2034 case FORMAT_UNIT:
2035 case RELEASE:
2036 case RESERVE:
2037 case SEND_DIAGNOSTIC:
2038 /* Fall through */
2039
2040 default:
2041 unknown_cmnd:
2042 common->data_size_from_cmnd = 0;
2043 sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
2044 reply = check_command(common, common->cmnd_size,
2045 DATA_DIR_UNKNOWN, ~0, 0, unknown);
2046 if (reply == 0) {
2047 common->curlun->sense_data = SS_INVALID_COMMAND;
2048 reply = -EINVAL;
2049 }
2050 break;
2051 }
2052 up_read(&common->filesem);
2053
2054 if (reply == -EINTR || signal_pending(current))
2055 return -EINTR;
2056
2057 /* Set up the single reply buffer for finish_reply() */
2058 if (reply == -EINVAL)
2059 reply = 0; /* Error reply length */
2060 if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
2061 reply = min((u32)reply, common->data_size_from_cmnd);
2062 bh->inreq->length = reply;
2063 bh->state = BUF_STATE_FULL;
2064 common->residue -= reply;
2065 } /* Otherwise it's already set */
2066
2067 return 0;
2068 }
2069
2070
2071 /*-------------------------------------------------------------------------*/
2072
2073 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
2074 {
2075 struct usb_request *req = bh->outreq;
2076 struct bulk_cb_wrap *cbw = req->buf;
2077 struct fsg_common *common = fsg->common;
2078
2079 /* Was this a real packet? Should it be ignored? */
2080 if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
2081 return -EINVAL;
2082
2083 /* Is the CBW valid? */
2084 if (req->actual != US_BULK_CB_WRAP_LEN ||
2085 cbw->Signature != cpu_to_le32(
2086 US_BULK_CB_SIGN)) {
2087 DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
2088 req->actual,
2089 le32_to_cpu(cbw->Signature));
2090
2091 /*
2092 * The Bulk-only spec says we MUST stall the IN endpoint
2093 * (6.6.1), so it's unavoidable. It also says we must
2094 * retain this state until the next reset, but there's
2095 * no way to tell the controller driver it should ignore
2096 * Clear-Feature(HALT) requests.
2097 *
2098 * We aren't required to halt the OUT endpoint; instead
2099 * we can simply accept and discard any data received
2100 * until the next reset.
2101 */
2102 wedge_bulk_in_endpoint(fsg);
2103 set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2104 return -EINVAL;
2105 }
2106
2107 /* Is the CBW meaningful? */
2108 if (cbw->Lun >= ARRAY_SIZE(common->luns) ||
2109 cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 ||
2110 cbw->Length > MAX_COMMAND_SIZE) {
2111 DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
2112 "cmdlen %u\n",
2113 cbw->Lun, cbw->Flags, cbw->Length);
2114
2115 /*
2116 * We can do anything we want here, so let's stall the
2117 * bulk pipes if we are allowed to.
2118 */
2119 if (common->can_stall) {
2120 fsg_set_halt(fsg, fsg->bulk_out);
2121 halt_bulk_in_endpoint(fsg);
2122 }
2123 return -EINVAL;
2124 }
2125
2126 /* Save the command for later */
2127 common->cmnd_size = cbw->Length;
2128 memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
2129 if (cbw->Flags & US_BULK_FLAG_IN)
2130 common->data_dir = DATA_DIR_TO_HOST;
2131 else
2132 common->data_dir = DATA_DIR_FROM_HOST;
2133 common->data_size = le32_to_cpu(cbw->DataTransferLength);
2134 if (common->data_size == 0)
2135 common->data_dir = DATA_DIR_NONE;
2136 common->lun = cbw->Lun;
2137 if (common->lun < ARRAY_SIZE(common->luns))
2138 common->curlun = common->luns[common->lun];
2139 else
2140 common->curlun = NULL;
2141 common->tag = cbw->Tag;
2142 return 0;
2143 }
2144
2145 static int get_next_command(struct fsg_common *common)
2146 {
2147 struct fsg_buffhd *bh;
2148 int rc = 0;
2149
2150 /* Wait for the next buffer to become available */
2151 bh = common->next_buffhd_to_fill;
2152 rc = sleep_thread(common, true, bh);
2153 if (rc)
2154 return rc;
2155
2156 /* Queue a request to read a Bulk-only CBW */
2157 set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
2158 if (!start_out_transfer(common, bh))
2159 /* Don't know what to do if common->fsg is NULL */
2160 return -EIO;
2161
2162 /*
2163 * We will drain the buffer in software, which means we
2164 * can reuse it for the next filling. No need to advance
2165 * next_buffhd_to_fill.
2166 */
2167
2168 /* Wait for the CBW to arrive */
2169 rc = sleep_thread(common, true, bh);
2170 if (rc)
2171 return rc;
2172
2173 rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
2174 bh->state = BUF_STATE_EMPTY;
2175
2176 return rc;
2177 }
2178
2179
2180 /*-------------------------------------------------------------------------*/
2181
2182 static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
2183 struct usb_request **preq)
2184 {
2185 *preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
2186 if (*preq)
2187 return 0;
2188 ERROR(common, "can't allocate request for %s\n", ep->name);
2189 return -ENOMEM;
2190 }
2191
2192 /* Reset interface setting and re-init endpoint state (toggle etc). */
2193 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
2194 {
2195 struct fsg_dev *fsg;
2196 int i, rc = 0;
2197
2198 if (common->running)
2199 DBG(common, "reset interface\n");
2200
2201 reset:
2202 /* Deallocate the requests */
2203 if (common->fsg) {
2204 fsg = common->fsg;
2205
2206 for (i = 0; i < common->fsg_num_buffers; ++i) {
2207 struct fsg_buffhd *bh = &common->buffhds[i];
2208
2209 if (bh->inreq) {
2210 usb_ep_free_request(fsg->bulk_in, bh->inreq);
2211 bh->inreq = NULL;
2212 }
2213 if (bh->outreq) {
2214 usb_ep_free_request(fsg->bulk_out, bh->outreq);
2215 bh->outreq = NULL;
2216 }
2217 }
2218
2219 /* Disable the endpoints */
2220 if (fsg->bulk_in_enabled) {
2221 usb_ep_disable(fsg->bulk_in);
2222 fsg->bulk_in_enabled = 0;
2223 }
2224 if (fsg->bulk_out_enabled) {
2225 usb_ep_disable(fsg->bulk_out);
2226 fsg->bulk_out_enabled = 0;
2227 }
2228
2229 common->fsg = NULL;
2230 wake_up(&common->fsg_wait);
2231 }
2232
2233 common->running = 0;
2234 if (!new_fsg || rc)
2235 return rc;
2236
2237 common->fsg = new_fsg;
2238 fsg = common->fsg;
2239
2240 /* Enable the endpoints */
2241 rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
2242 if (rc)
2243 goto reset;
2244 rc = usb_ep_enable(fsg->bulk_in);
2245 if (rc)
2246 goto reset;
2247 fsg->bulk_in->driver_data = common;
2248 fsg->bulk_in_enabled = 1;
2249
2250 rc = config_ep_by_speed(common->gadget, &(fsg->function),
2251 fsg->bulk_out);
2252 if (rc)
2253 goto reset;
2254 rc = usb_ep_enable(fsg->bulk_out);
2255 if (rc)
2256 goto reset;
2257 fsg->bulk_out->driver_data = common;
2258 fsg->bulk_out_enabled = 1;
2259 common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
2260 clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2261
2262 /* Allocate the requests */
2263 for (i = 0; i < common->fsg_num_buffers; ++i) {
2264 struct fsg_buffhd *bh = &common->buffhds[i];
2265
2266 rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
2267 if (rc)
2268 goto reset;
2269 rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
2270 if (rc)
2271 goto reset;
2272 bh->inreq->buf = bh->outreq->buf = bh->buf;
2273 bh->inreq->context = bh->outreq->context = bh;
2274 bh->inreq->complete = bulk_in_complete;
2275 bh->outreq->complete = bulk_out_complete;
2276 }
2277
2278 common->running = 1;
2279 for (i = 0; i < ARRAY_SIZE(common->luns); ++i)
2280 if (common->luns[i])
2281 common->luns[i]->unit_attention_data =
2282 SS_RESET_OCCURRED;
2283 return rc;
2284 }
2285
2286
2287 /****************************** ALT CONFIGS ******************************/
2288
2289 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
2290 {
2291 struct fsg_dev *fsg = fsg_from_func(f);
2292 fsg->common->new_fsg = fsg;
2293 raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
2294 return USB_GADGET_DELAYED_STATUS;
2295 }
2296
2297 static void fsg_disable(struct usb_function *f)
2298 {
2299 struct fsg_dev *fsg = fsg_from_func(f);
2300 fsg->common->new_fsg = NULL;
2301 raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
2302 }
2303
2304
2305 /*-------------------------------------------------------------------------*/
2306
2307 static void handle_exception(struct fsg_common *common)
2308 {
2309 int i;
2310 struct fsg_buffhd *bh;
2311 enum fsg_state old_state;
2312 struct fsg_lun *curlun;
2313 unsigned int exception_req_tag;
2314
2315 /*
2316 * Clear the existing signals. Anything but SIGUSR1 is converted
2317 * into a high-priority EXIT exception.
2318 */
2319 for (;;) {
2320 int sig = kernel_dequeue_signal(NULL);
2321 if (!sig)
2322 break;
2323 if (sig != SIGUSR1) {
2324 spin_lock_irq(&common->lock);
2325 if (common->state < FSG_STATE_EXIT)
2326 DBG(common, "Main thread exiting on signal\n");
2327 common->state = FSG_STATE_EXIT;
2328 spin_unlock_irq(&common->lock);
2329 }
2330 }
2331
2332 /* Cancel all the pending transfers */
2333 if (likely(common->fsg)) {
2334 for (i = 0; i < common->fsg_num_buffers; ++i) {
2335 bh = &common->buffhds[i];
2336 if (bh->state == BUF_STATE_SENDING)
2337 usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
2338 if (bh->state == BUF_STATE_RECEIVING)
2339 usb_ep_dequeue(common->fsg->bulk_out,
2340 bh->outreq);
2341
2342 /* Wait for a transfer to become idle */
2343 if (sleep_thread(common, false, bh))
2344 return;
2345 }
2346
2347 /* Clear out the controller's fifos */
2348 if (common->fsg->bulk_in_enabled)
2349 usb_ep_fifo_flush(common->fsg->bulk_in);
2350 if (common->fsg->bulk_out_enabled)
2351 usb_ep_fifo_flush(common->fsg->bulk_out);
2352 }
2353
2354 /*
2355 * Reset the I/O buffer states and pointers, the SCSI
2356 * state, and the exception. Then invoke the handler.
2357 */
2358 spin_lock_irq(&common->lock);
2359
2360 for (i = 0; i < common->fsg_num_buffers; ++i) {
2361 bh = &common->buffhds[i];
2362 bh->state = BUF_STATE_EMPTY;
2363 }
2364 common->next_buffhd_to_fill = &common->buffhds[0];
2365 common->next_buffhd_to_drain = &common->buffhds[0];
2366 exception_req_tag = common->exception_req_tag;
2367 old_state = common->state;
2368 common->state = FSG_STATE_NORMAL;
2369
2370 if (old_state != FSG_STATE_ABORT_BULK_OUT) {
2371 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2372 curlun = common->luns[i];
2373 if (!curlun)
2374 continue;
2375 curlun->prevent_medium_removal = 0;
2376 curlun->sense_data = SS_NO_SENSE;
2377 curlun->unit_attention_data = SS_NO_SENSE;
2378 curlun->sense_data_info = 0;
2379 curlun->info_valid = 0;
2380 }
2381 }
2382 spin_unlock_irq(&common->lock);
2383
2384 /* Carry out any extra actions required for the exception */
2385 switch (old_state) {
2386 case FSG_STATE_NORMAL:
2387 break;
2388
2389 case FSG_STATE_ABORT_BULK_OUT:
2390 send_status(common);
2391 break;
2392
2393 case FSG_STATE_PROTOCOL_RESET:
2394 /*
2395 * In case we were forced against our will to halt a
2396 * bulk endpoint, clear the halt now. (The SuperH UDC
2397 * requires this.)
2398 */
2399 if (!fsg_is_set(common))
2400 break;
2401 if (test_and_clear_bit(IGNORE_BULK_OUT,
2402 &common->fsg->atomic_bitflags))
2403 usb_ep_clear_halt(common->fsg->bulk_in);
2404
2405 if (common->ep0_req_tag == exception_req_tag)
2406 ep0_queue(common); /* Complete the status stage */
2407
2408 /*
2409 * Technically this should go here, but it would only be
2410 * a waste of time. Ditto for the INTERFACE_CHANGE and
2411 * CONFIG_CHANGE cases.
2412 */
2413 /* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */
2414 /* if (common->luns[i]) */
2415 /* common->luns[i]->unit_attention_data = */
2416 /* SS_RESET_OCCURRED; */
2417 break;
2418
2419 case FSG_STATE_CONFIG_CHANGE:
2420 do_set_interface(common, common->new_fsg);
2421 if (common->new_fsg)
2422 usb_composite_setup_continue(common->cdev);
2423 break;
2424
2425 case FSG_STATE_EXIT:
2426 do_set_interface(common, NULL); /* Free resources */
2427 spin_lock_irq(&common->lock);
2428 common->state = FSG_STATE_TERMINATED; /* Stop the thread */
2429 spin_unlock_irq(&common->lock);
2430 break;
2431
2432 case FSG_STATE_TERMINATED:
2433 break;
2434 }
2435 }
2436
2437
2438 /*-------------------------------------------------------------------------*/
2439
2440 static int fsg_main_thread(void *common_)
2441 {
2442 struct fsg_common *common = common_;
2443
2444 /*
2445 * Allow the thread to be killed by a signal, but set the signal mask
2446 * to block everything but INT, TERM, KILL, and USR1.
2447 */
2448 allow_signal(SIGINT);
2449 allow_signal(SIGTERM);
2450 allow_signal(SIGKILL);
2451 allow_signal(SIGUSR1);
2452
2453 /* Allow the thread to be frozen */
2454 set_freezable();
2455
2456 /*
2457 * Arrange for userspace references to be interpreted as kernel
2458 * pointers. That way we can pass a kernel pointer to a routine
2459 * that expects a __user pointer and it will work okay.
2460 */
2461 set_fs(get_ds());
2462
2463 /* The main loop */
2464 while (common->state != FSG_STATE_TERMINATED) {
2465 if (exception_in_progress(common) || signal_pending(current)) {
2466 handle_exception(common);
2467 continue;
2468 }
2469
2470 if (!common->running) {
2471 sleep_thread(common, true, NULL);
2472 continue;
2473 }
2474
2475 if (get_next_command(common) || exception_in_progress(common))
2476 continue;
2477 if (do_scsi_command(common) || exception_in_progress(common))
2478 continue;
2479 if (finish_reply(common) || exception_in_progress(common))
2480 continue;
2481 send_status(common);
2482 }
2483
2484 spin_lock_irq(&common->lock);
2485 common->thread_task = NULL;
2486 spin_unlock_irq(&common->lock);
2487
2488 if (!common->ops || !common->ops->thread_exits
2489 || common->ops->thread_exits(common) < 0) {
2490 int i;
2491
2492 down_write(&common->filesem);
2493 for (i = 0; i < ARRAY_SIZE(common->luns); i++) {
2494 struct fsg_lun *curlun = common->luns[i];
2495 if (!curlun || !fsg_lun_is_open(curlun))
2496 continue;
2497
2498 fsg_lun_close(curlun);
2499 curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
2500 }
2501 up_write(&common->filesem);
2502 }
2503
2504 /* Let fsg_unbind() know the thread has exited */
2505 complete_and_exit(&common->thread_notifier, 0);
2506 }
2507
2508
2509 /*************************** DEVICE ATTRIBUTES ***************************/
2510
2511 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
2512 {
2513 struct fsg_lun *curlun = fsg_lun_from_dev(dev);
2514
2515 return fsg_show_ro(curlun, buf);
2516 }
2517
2518 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
2519 char *buf)
2520 {
2521 struct fsg_lun *curlun = fsg_lun_from_dev(dev);
2522
2523 return fsg_show_nofua(curlun, buf);
2524 }
2525
2526 static ssize_t file_show(struct device *dev, struct device_attribute *attr,
2527 char *buf)
2528 {
2529 struct fsg_lun *curlun = fsg_lun_from_dev(dev);
2530 struct rw_semaphore *filesem = dev_get_drvdata(dev);
2531
2532 return fsg_show_file(curlun, filesem, buf);
2533 }
2534
2535 static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
2536 const char *buf, size_t count)
2537 {
2538 struct fsg_lun *curlun = fsg_lun_from_dev(dev);
2539 struct rw_semaphore *filesem = dev_get_drvdata(dev);
2540
2541 return fsg_store_ro(curlun, filesem, buf, count);
2542 }
2543
2544 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
2545 const char *buf, size_t count)
2546 {
2547 struct fsg_lun *curlun = fsg_lun_from_dev(dev);
2548
2549 return fsg_store_nofua(curlun, buf, count);
2550 }
2551
2552 static ssize_t file_store(struct device *dev, struct device_attribute *attr,
2553 const char *buf, size_t count)
2554 {
2555 struct fsg_lun *curlun = fsg_lun_from_dev(dev);
2556 struct rw_semaphore *filesem = dev_get_drvdata(dev);
2557
2558 return fsg_store_file(curlun, filesem, buf, count);
2559 }
2560
2561 static DEVICE_ATTR_RW(nofua);
2562 /* mode wil be set in fsg_lun_attr_is_visible() */
2563 static DEVICE_ATTR(ro, 0, ro_show, ro_store);
2564 static DEVICE_ATTR(file, 0, file_show, file_store);
2565
2566 /****************************** FSG COMMON ******************************/
2567
2568 static void fsg_common_release(struct kref *ref);
2569
2570 static void fsg_lun_release(struct device *dev)
2571 {
2572 /* Nothing needs to be done */
2573 }
2574
2575 void fsg_common_get(struct fsg_common *common)
2576 {
2577 kref_get(&common->ref);
2578 }
2579 EXPORT_SYMBOL_GPL(fsg_common_get);
2580
2581 void fsg_common_put(struct fsg_common *common)
2582 {
2583 kref_put(&common->ref, fsg_common_release);
2584 }
2585 EXPORT_SYMBOL_GPL(fsg_common_put);
2586
2587 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
2588 {
2589 if (!common) {
2590 common = kzalloc(sizeof(*common), GFP_KERNEL);
2591 if (!common)
2592 return ERR_PTR(-ENOMEM);
2593 common->free_storage_on_release = 1;
2594 } else {
2595 common->free_storage_on_release = 0;
2596 }
2597 init_rwsem(&common->filesem);
2598 spin_lock_init(&common->lock);
2599 kref_init(&common->ref);
2600 init_completion(&common->thread_notifier);
2601 init_waitqueue_head(&common->io_wait);
2602 init_waitqueue_head(&common->fsg_wait);
2603 common->state = FSG_STATE_TERMINATED;
2604 memset(common->luns, 0, sizeof(common->luns));
2605
2606 return common;
2607 }
2608
2609 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
2610 {
2611 common->sysfs = sysfs;
2612 }
2613 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
2614
2615 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
2616 {
2617 if (buffhds) {
2618 struct fsg_buffhd *bh = buffhds;
2619 while (n--) {
2620 kfree(bh->buf);
2621 ++bh;
2622 }
2623 kfree(buffhds);
2624 }
2625 }
2626
2627 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
2628 {
2629 struct fsg_buffhd *bh, *buffhds;
2630 int i;
2631
2632 buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
2633 if (!buffhds)
2634 return -ENOMEM;
2635
2636 /* Data buffers cyclic list */
2637 bh = buffhds;
2638 i = n;
2639 goto buffhds_first_it;
2640 do {
2641 bh->next = bh + 1;
2642 ++bh;
2643 buffhds_first_it:
2644 bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
2645 if (unlikely(!bh->buf))
2646 goto error_release;
2647 } while (--i);
2648 bh->next = buffhds;
2649
2650 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2651 common->fsg_num_buffers = n;
2652 common->buffhds = buffhds;
2653
2654 return 0;
2655
2656 error_release:
2657 /*
2658 * "buf"s pointed to by heads after n - i are NULL
2659 * so releasing them won't hurt
2660 */
2661 _fsg_common_free_buffers(buffhds, n);
2662
2663 return -ENOMEM;
2664 }
2665 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
2666
2667 void fsg_common_remove_lun(struct fsg_lun *lun)
2668 {
2669 if (device_is_registered(&lun->dev))
2670 device_unregister(&lun->dev);
2671 fsg_lun_close(lun);
2672 kfree(lun);
2673 }
2674 EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
2675
2676 static void _fsg_common_remove_luns(struct fsg_common *common, int n)
2677 {
2678 int i;
2679
2680 for (i = 0; i < n; ++i)
2681 if (common->luns[i]) {
2682 fsg_common_remove_lun(common->luns[i]);
2683 common->luns[i] = NULL;
2684 }
2685 }
2686
2687 void fsg_common_remove_luns(struct fsg_common *common)
2688 {
2689 _fsg_common_remove_luns(common, ARRAY_SIZE(common->luns));
2690 }
2691 EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
2692
2693 void fsg_common_set_ops(struct fsg_common *common,
2694 const struct fsg_operations *ops)
2695 {
2696 common->ops = ops;
2697 }
2698 EXPORT_SYMBOL_GPL(fsg_common_set_ops);
2699
2700 void fsg_common_free_buffers(struct fsg_common *common)
2701 {
2702 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2703 common->buffhds = NULL;
2704 }
2705 EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
2706
2707 int fsg_common_set_cdev(struct fsg_common *common,
2708 struct usb_composite_dev *cdev, bool can_stall)
2709 {
2710 struct usb_string *us;
2711
2712 common->gadget = cdev->gadget;
2713 common->ep0 = cdev->gadget->ep0;
2714 common->ep0req = cdev->req;
2715 common->cdev = cdev;
2716
2717 us = usb_gstrings_attach(cdev, fsg_strings_array,
2718 ARRAY_SIZE(fsg_strings));
2719 if (IS_ERR(us))
2720 return PTR_ERR(us);
2721
2722 fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
2723
2724 /*
2725 * Some peripheral controllers are known not to be able to
2726 * halt bulk endpoints correctly. If one of them is present,
2727 * disable stalls.
2728 */
2729 common->can_stall = can_stall &&
2730 gadget_is_stall_supported(common->gadget);
2731
2732 return 0;
2733 }
2734 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
2735
2736 static struct attribute *fsg_lun_dev_attrs[] = {
2737 &dev_attr_ro.attr,
2738 &dev_attr_file.attr,
2739 &dev_attr_nofua.attr,
2740 NULL
2741 };
2742
2743 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
2744 struct attribute *attr, int idx)
2745 {
2746 struct device *dev = kobj_to_dev(kobj);
2747 struct fsg_lun *lun = fsg_lun_from_dev(dev);
2748
2749 if (attr == &dev_attr_ro.attr)
2750 return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
2751 if (attr == &dev_attr_file.attr)
2752 return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
2753 return attr->mode;
2754 }
2755
2756 static const struct attribute_group fsg_lun_dev_group = {
2757 .attrs = fsg_lun_dev_attrs,
2758 .is_visible = fsg_lun_dev_is_visible,
2759 };
2760
2761 static const struct attribute_group *fsg_lun_dev_groups[] = {
2762 &fsg_lun_dev_group,
2763 NULL
2764 };
2765
2766 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
2767 unsigned int id, const char *name,
2768 const char **name_pfx)
2769 {
2770 struct fsg_lun *lun;
2771 char *pathbuf, *p;
2772 int rc = -ENOMEM;
2773
2774 if (id >= ARRAY_SIZE(common->luns))
2775 return -ENODEV;
2776
2777 if (common->luns[id])
2778 return -EBUSY;
2779
2780 if (!cfg->filename && !cfg->removable) {
2781 pr_err("no file given for LUN%d\n", id);
2782 return -EINVAL;
2783 }
2784
2785 lun = kzalloc(sizeof(*lun), GFP_KERNEL);
2786 if (!lun)
2787 return -ENOMEM;
2788
2789 lun->name_pfx = name_pfx;
2790
2791 lun->cdrom = !!cfg->cdrom;
2792 lun->ro = cfg->cdrom || cfg->ro;
2793 lun->initially_ro = lun->ro;
2794 lun->removable = !!cfg->removable;
2795
2796 if (!common->sysfs) {
2797 /* we DON'T own the name!*/
2798 lun->name = name;
2799 } else {
2800 lun->dev.release = fsg_lun_release;
2801 lun->dev.parent = &common->gadget->dev;
2802 lun->dev.groups = fsg_lun_dev_groups;
2803 dev_set_drvdata(&lun->dev, &common->filesem);
2804 dev_set_name(&lun->dev, "%s", name);
2805 lun->name = dev_name(&lun->dev);
2806
2807 rc = device_register(&lun->dev);
2808 if (rc) {
2809 pr_info("failed to register LUN%d: %d\n", id, rc);
2810 put_device(&lun->dev);
2811 goto error_sysfs;
2812 }
2813 }
2814
2815 common->luns[id] = lun;
2816
2817 if (cfg->filename) {
2818 rc = fsg_lun_open(lun, cfg->filename);
2819 if (rc)
2820 goto error_lun;
2821 }
2822
2823 pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
2824 p = "(no medium)";
2825 if (fsg_lun_is_open(lun)) {
2826 p = "(error)";
2827 if (pathbuf) {
2828 p = file_path(lun->filp, pathbuf, PATH_MAX);
2829 if (IS_ERR(p))
2830 p = "(error)";
2831 }
2832 }
2833 pr_info("LUN: %s%s%sfile: %s\n",
2834 lun->removable ? "removable " : "",
2835 lun->ro ? "read only " : "",
2836 lun->cdrom ? "CD-ROM " : "",
2837 p);
2838 kfree(pathbuf);
2839
2840 return 0;
2841
2842 error_lun:
2843 if (device_is_registered(&lun->dev))
2844 device_unregister(&lun->dev);
2845 fsg_lun_close(lun);
2846 common->luns[id] = NULL;
2847 error_sysfs:
2848 kfree(lun);
2849 return rc;
2850 }
2851 EXPORT_SYMBOL_GPL(fsg_common_create_lun);
2852
2853 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
2854 {
2855 char buf[8]; /* enough for 100000000 different numbers, decimal */
2856 int i, rc;
2857
2858 fsg_common_remove_luns(common);
2859
2860 for (i = 0; i < cfg->nluns; ++i) {
2861 snprintf(buf, sizeof(buf), "lun%d", i);
2862 rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
2863 if (rc)
2864 goto fail;
2865 }
2866
2867 pr_info("Number of LUNs=%d\n", cfg->nluns);
2868
2869 return 0;
2870
2871 fail:
2872 _fsg_common_remove_luns(common, i);
2873 return rc;
2874 }
2875 EXPORT_SYMBOL_GPL(fsg_common_create_luns);
2876
2877 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
2878 const char *pn)
2879 {
2880 int i;
2881
2882 /* Prepare inquiryString */
2883 i = get_default_bcdDevice();
2884 snprintf(common->inquiry_string, sizeof(common->inquiry_string),
2885 "%-8s%-16s%04x", vn ?: "Linux",
2886 /* Assume product name dependent on the first LUN */
2887 pn ?: ((*common->luns)->cdrom
2888 ? "File-CD Gadget"
2889 : "File-Stor Gadget"),
2890 i);
2891 }
2892 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
2893
2894 static void fsg_common_release(struct kref *ref)
2895 {
2896 struct fsg_common *common = container_of(ref, struct fsg_common, ref);
2897 int i;
2898
2899 /* If the thread isn't already dead, tell it to exit now */
2900 if (common->state != FSG_STATE_TERMINATED) {
2901 raise_exception(common, FSG_STATE_EXIT);
2902 wait_for_completion(&common->thread_notifier);
2903 }
2904
2905 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) {
2906 struct fsg_lun *lun = common->luns[i];
2907 if (!lun)
2908 continue;
2909 fsg_lun_close(lun);
2910 if (device_is_registered(&lun->dev))
2911 device_unregister(&lun->dev);
2912 kfree(lun);
2913 }
2914
2915 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2916 if (common->free_storage_on_release)
2917 kfree(common);
2918 }
2919
2920
2921 /*-------------------------------------------------------------------------*/
2922
2923 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
2924 {
2925 struct fsg_dev *fsg = fsg_from_func(f);
2926 struct fsg_common *common = fsg->common;
2927 struct usb_gadget *gadget = c->cdev->gadget;
2928 int i;
2929 struct usb_ep *ep;
2930 unsigned max_burst;
2931 int ret;
2932 struct fsg_opts *opts;
2933
2934 /* Don't allow to bind if we don't have at least one LUN */
2935 ret = _fsg_common_get_max_lun(common);
2936 if (ret < 0) {
2937 pr_err("There should be at least one LUN.\n");
2938 return -EINVAL;
2939 }
2940
2941 opts = fsg_opts_from_func_inst(f->fi);
2942 if (!opts->no_configfs) {
2943 ret = fsg_common_set_cdev(fsg->common, c->cdev,
2944 fsg->common->can_stall);
2945 if (ret)
2946 return ret;
2947 fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
2948 }
2949
2950 if (!common->thread_task) {
2951 common->state = FSG_STATE_NORMAL;
2952 common->thread_task =
2953 kthread_create(fsg_main_thread, common, "file-storage");
2954 if (IS_ERR(common->thread_task)) {
2955 ret = PTR_ERR(common->thread_task);
2956 common->thread_task = NULL;
2957 common->state = FSG_STATE_TERMINATED;
2958 return ret;
2959 }
2960 DBG(common, "I/O thread pid: %d\n",
2961 task_pid_nr(common->thread_task));
2962 wake_up_process(common->thread_task);
2963 }
2964
2965 fsg->gadget = gadget;
2966
2967 /* New interface */
2968 i = usb_interface_id(c, f);
2969 if (i < 0)
2970 goto fail;
2971 fsg_intf_desc.bInterfaceNumber = i;
2972 fsg->interface_number = i;
2973
2974 /* Find all the endpoints we will use */
2975 ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
2976 if (!ep)
2977 goto autoconf_fail;
2978 fsg->bulk_in = ep;
2979
2980 ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
2981 if (!ep)
2982 goto autoconf_fail;
2983 fsg->bulk_out = ep;
2984
2985 /* Assume endpoint addresses are the same for both speeds */
2986 fsg_hs_bulk_in_desc.bEndpointAddress =
2987 fsg_fs_bulk_in_desc.bEndpointAddress;
2988 fsg_hs_bulk_out_desc.bEndpointAddress =
2989 fsg_fs_bulk_out_desc.bEndpointAddress;
2990
2991 /* Calculate bMaxBurst, we know packet size is 1024 */
2992 max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
2993
2994 fsg_ss_bulk_in_desc.bEndpointAddress =
2995 fsg_fs_bulk_in_desc.bEndpointAddress;
2996 fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
2997
2998 fsg_ss_bulk_out_desc.bEndpointAddress =
2999 fsg_fs_bulk_out_desc.bEndpointAddress;
3000 fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
3001
3002 ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
3003 fsg_ss_function, fsg_ss_function);
3004 if (ret)
3005 goto autoconf_fail;
3006
3007 return 0;
3008
3009 autoconf_fail:
3010 ERROR(fsg, "unable to autoconfigure all endpoints\n");
3011 i = -ENOTSUPP;
3012 fail:
3013 /* terminate the thread */
3014 if (fsg->common->state != FSG_STATE_TERMINATED) {
3015 raise_exception(fsg->common, FSG_STATE_EXIT);
3016 wait_for_completion(&fsg->common->thread_notifier);
3017 }
3018 return i;
3019 }
3020
3021 /****************************** ALLOCATE FUNCTION *************************/
3022
3023 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
3024 {
3025 struct fsg_dev *fsg = fsg_from_func(f);
3026 struct fsg_common *common = fsg->common;
3027
3028 DBG(fsg, "unbind\n");
3029 if (fsg->common->fsg == fsg) {
3030 fsg->common->new_fsg = NULL;
3031 raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
3032 /* FIXME: make interruptible or killable somehow? */
3033 wait_event(common->fsg_wait, common->fsg != fsg);
3034 }
3035
3036 usb_free_all_descriptors(&fsg->function);
3037 }
3038
3039 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
3040 {
3041 return container_of(to_config_group(item), struct fsg_lun_opts, group);
3042 }
3043
3044 static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
3045 {
3046 return container_of(to_config_group(item), struct fsg_opts,
3047 func_inst.group);
3048 }
3049
3050 static void fsg_lun_attr_release(struct config_item *item)
3051 {
3052 struct fsg_lun_opts *lun_opts;
3053
3054 lun_opts = to_fsg_lun_opts(item);
3055 kfree(lun_opts);
3056 }
3057
3058 static struct configfs_item_operations fsg_lun_item_ops = {
3059 .release = fsg_lun_attr_release,
3060 };
3061
3062 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page)
3063 {
3064 struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3065 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3066
3067 return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
3068 }
3069
3070 static ssize_t fsg_lun_opts_file_store(struct config_item *item,
3071 const char *page, size_t len)
3072 {
3073 struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3074 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3075
3076 return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
3077 }
3078
3079 CONFIGFS_ATTR(fsg_lun_opts_, file);
3080
3081 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page)
3082 {
3083 return fsg_show_ro(to_fsg_lun_opts(item)->lun, page);
3084 }
3085
3086 static ssize_t fsg_lun_opts_ro_store(struct config_item *item,
3087 const char *page, size_t len)
3088 {
3089 struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3090 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3091
3092 return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
3093 }
3094
3095 CONFIGFS_ATTR(fsg_lun_opts_, ro);
3096
3097 static ssize_t fsg_lun_opts_removable_show(struct config_item *item,
3098 char *page)
3099 {
3100 return fsg_show_removable(to_fsg_lun_opts(item)->lun, page);
3101 }
3102
3103 static ssize_t fsg_lun_opts_removable_store(struct config_item *item,
3104 const char *page, size_t len)
3105 {
3106 return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len);
3107 }
3108
3109 CONFIGFS_ATTR(fsg_lun_opts_, removable);
3110
3111 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page)
3112 {
3113 return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page);
3114 }
3115
3116 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item,
3117 const char *page, size_t len)
3118 {
3119 struct fsg_lun_opts *opts = to_fsg_lun_opts(item);
3120 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3121
3122 return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
3123 len);
3124 }
3125
3126 CONFIGFS_ATTR(fsg_lun_opts_, cdrom);
3127
3128 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page)
3129 {
3130 return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page);
3131 }
3132
3133 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item,
3134 const char *page, size_t len)
3135 {
3136 return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len);
3137 }
3138
3139 CONFIGFS_ATTR(fsg_lun_opts_, nofua);
3140
3141 static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item,
3142 char *page)
3143 {
3144 return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page);
3145 }
3146
3147 static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item,
3148 const char *page, size_t len)
3149 {
3150 return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len);
3151 }
3152
3153 CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string);
3154
3155 static struct configfs_attribute *fsg_lun_attrs[] = {
3156 &fsg_lun_opts_attr_file,
3157 &fsg_lun_opts_attr_ro,
3158 &fsg_lun_opts_attr_removable,
3159 &fsg_lun_opts_attr_cdrom,
3160 &fsg_lun_opts_attr_nofua,
3161 &fsg_lun_opts_attr_inquiry_string,
3162 NULL,
3163 };
3164
3165 static struct config_item_type fsg_lun_type = {
3166 .ct_item_ops = &fsg_lun_item_ops,
3167 .ct_attrs = fsg_lun_attrs,
3168 .ct_owner = THIS_MODULE,
3169 };
3170
3171 static struct config_group *fsg_lun_make(struct config_group *group,
3172 const char *name)
3173 {
3174 struct fsg_lun_opts *opts;
3175 struct fsg_opts *fsg_opts;
3176 struct fsg_lun_config config;
3177 char *num_str;
3178 u8 num;
3179 int ret;
3180
3181 num_str = strchr(name, '.');
3182 if (!num_str) {
3183 pr_err("Unable to locate . in LUN.NUMBER\n");
3184 return ERR_PTR(-EINVAL);
3185 }
3186 num_str++;
3187
3188 ret = kstrtou8(num_str, 0, &num);
3189 if (ret)
3190 return ERR_PTR(ret);
3191
3192 fsg_opts = to_fsg_opts(&group->cg_item);
3193 if (num >= FSG_MAX_LUNS)
3194 return ERR_PTR(-ERANGE);
3195
3196 mutex_lock(&fsg_opts->lock);
3197 if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
3198 ret = -EBUSY;
3199 goto out;
3200 }
3201
3202 opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3203 if (!opts) {
3204 ret = -ENOMEM;
3205 goto out;
3206 }
3207
3208 memset(&config, 0, sizeof(config));
3209 config.removable = true;
3210
3211 ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
3212 (const char **)&group->cg_item.ci_name);
3213 if (ret) {
3214 kfree(opts);
3215 goto out;
3216 }
3217 opts->lun = fsg_opts->common->luns[num];
3218 opts->lun_id = num;
3219 mutex_unlock(&fsg_opts->lock);
3220
3221 config_group_init_type_name(&opts->group, name, &fsg_lun_type);
3222
3223 return &opts->group;
3224 out:
3225 mutex_unlock(&fsg_opts->lock);
3226 return ERR_PTR(ret);
3227 }
3228
3229 static void fsg_lun_drop(struct config_group *group, struct config_item *item)
3230 {
3231 struct fsg_lun_opts *lun_opts;
3232 struct fsg_opts *fsg_opts;
3233
3234 lun_opts = to_fsg_lun_opts(item);
3235 fsg_opts = to_fsg_opts(&group->cg_item);
3236
3237 mutex_lock(&fsg_opts->lock);
3238 if (fsg_opts->refcnt) {
3239 struct config_item *gadget;
3240
3241 gadget = group->cg_item.ci_parent->ci_parent;
3242 unregister_gadget_item(gadget);
3243 }
3244
3245 fsg_common_remove_lun(lun_opts->lun);
3246 fsg_opts->common->luns[lun_opts->lun_id] = NULL;
3247 lun_opts->lun_id = 0;
3248 mutex_unlock(&fsg_opts->lock);
3249
3250 config_item_put(item);
3251 }
3252
3253 static void fsg_attr_release(struct config_item *item)
3254 {
3255 struct fsg_opts *opts = to_fsg_opts(item);
3256
3257 usb_put_function_instance(&opts->func_inst);
3258 }
3259
3260 static struct configfs_item_operations fsg_item_ops = {
3261 .release = fsg_attr_release,
3262 };
3263
3264 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page)
3265 {
3266 struct fsg_opts *opts = to_fsg_opts(item);
3267 int result;
3268
3269 mutex_lock(&opts->lock);
3270 result = sprintf(page, "%d", opts->common->can_stall);
3271 mutex_unlock(&opts->lock);
3272
3273 return result;
3274 }
3275
3276 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page,
3277 size_t len)
3278 {
3279 struct fsg_opts *opts = to_fsg_opts(item);
3280 int ret;
3281 bool stall;
3282
3283 mutex_lock(&opts->lock);
3284
3285 if (opts->refcnt) {
3286 mutex_unlock(&opts->lock);
3287 return -EBUSY;
3288 }
3289
3290 ret = strtobool(page, &stall);
3291 if (!ret) {
3292 opts->common->can_stall = stall;
3293 ret = len;
3294 }
3295
3296 mutex_unlock(&opts->lock);
3297
3298 return ret;
3299 }
3300
3301 CONFIGFS_ATTR(fsg_opts_, stall);
3302
3303 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3304 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page)
3305 {
3306 struct fsg_opts *opts = to_fsg_opts(item);
3307 int result;
3308
3309 mutex_lock(&opts->lock);
3310 result = sprintf(page, "%d", opts->common->fsg_num_buffers);
3311 mutex_unlock(&opts->lock);
3312
3313 return result;
3314 }
3315
3316 static ssize_t fsg_opts_num_buffers_store(struct config_item *item,
3317 const char *page, size_t len)
3318 {
3319 struct fsg_opts *opts = to_fsg_opts(item);
3320 int ret;
3321 u8 num;
3322
3323 mutex_lock(&opts->lock);
3324 if (opts->refcnt) {
3325 ret = -EBUSY;
3326 goto end;
3327 }
3328 ret = kstrtou8(page, 0, &num);
3329 if (ret)
3330 goto end;
3331
3332 fsg_common_set_num_buffers(opts->common, num);
3333 ret = len;
3334
3335 end:
3336 mutex_unlock(&opts->lock);
3337 return ret;
3338 }
3339
3340 CONFIGFS_ATTR(fsg_opts_, num_buffers);
3341 #endif
3342
3343 static struct configfs_attribute *fsg_attrs[] = {
3344 &fsg_opts_attr_stall,
3345 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3346 &fsg_opts_attr_num_buffers,
3347 #endif
3348 NULL,
3349 };
3350
3351 static struct configfs_group_operations fsg_group_ops = {
3352 .make_group = fsg_lun_make,
3353 .drop_item = fsg_lun_drop,
3354 };
3355
3356 static struct config_item_type fsg_func_type = {
3357 .ct_item_ops = &fsg_item_ops,
3358 .ct_group_ops = &fsg_group_ops,
3359 .ct_attrs = fsg_attrs,
3360 .ct_owner = THIS_MODULE,
3361 };
3362
3363 static void fsg_free_inst(struct usb_function_instance *fi)
3364 {
3365 struct fsg_opts *opts;
3366
3367 opts = fsg_opts_from_func_inst(fi);
3368 fsg_common_put(opts->common);
3369 kfree(opts);
3370 }
3371
3372 static struct usb_function_instance *fsg_alloc_inst(void)
3373 {
3374 struct fsg_opts *opts;
3375 struct fsg_lun_config config;
3376 int rc;
3377
3378 opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3379 if (!opts)
3380 return ERR_PTR(-ENOMEM);
3381 mutex_init(&opts->lock);
3382 opts->func_inst.free_func_inst = fsg_free_inst;
3383 opts->common = fsg_common_setup(opts->common);
3384 if (IS_ERR(opts->common)) {
3385 rc = PTR_ERR(opts->common);
3386 goto release_opts;
3387 }
3388
3389 rc = fsg_common_set_num_buffers(opts->common,
3390 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
3391 if (rc)
3392 goto release_opts;
3393
3394 pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
3395
3396 memset(&config, 0, sizeof(config));
3397 config.removable = true;
3398 rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
3399 (const char **)&opts->func_inst.group.cg_item.ci_name);
3400 if (rc)
3401 goto release_buffers;
3402
3403 opts->lun0.lun = opts->common->luns[0];
3404 opts->lun0.lun_id = 0;
3405
3406 config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
3407
3408 config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
3409 configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group);
3410
3411 return &opts->func_inst;
3412
3413 release_buffers:
3414 fsg_common_free_buffers(opts->common);
3415 release_opts:
3416 kfree(opts);
3417 return ERR_PTR(rc);
3418 }
3419
3420 static void fsg_free(struct usb_function *f)
3421 {
3422 struct fsg_dev *fsg;
3423 struct fsg_opts *opts;
3424
3425 fsg = container_of(f, struct fsg_dev, function);
3426 opts = container_of(f->fi, struct fsg_opts, func_inst);
3427
3428 mutex_lock(&opts->lock);
3429 opts->refcnt--;
3430 mutex_unlock(&opts->lock);
3431
3432 kfree(fsg);
3433 }
3434
3435 static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
3436 {
3437 struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
3438 struct fsg_common *common = opts->common;
3439 struct fsg_dev *fsg;
3440
3441 fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
3442 if (unlikely(!fsg))
3443 return ERR_PTR(-ENOMEM);
3444
3445 mutex_lock(&opts->lock);
3446 opts->refcnt++;
3447 mutex_unlock(&opts->lock);
3448
3449 fsg->function.name = FSG_DRIVER_DESC;
3450 fsg->function.bind = fsg_bind;
3451 fsg->function.unbind = fsg_unbind;
3452 fsg->function.setup = fsg_setup;
3453 fsg->function.set_alt = fsg_set_alt;
3454 fsg->function.disable = fsg_disable;
3455 fsg->function.free_func = fsg_free;
3456
3457 fsg->common = common;
3458
3459 return &fsg->function;
3460 }
3461
3462 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
3463 MODULE_LICENSE("GPL");
3464 MODULE_AUTHOR("Michal Nazarewicz");
3465
3466 /************************* Module parameters *************************/
3467
3468
3469 void fsg_config_from_params(struct fsg_config *cfg,
3470 const struct fsg_module_parameters *params,
3471 unsigned int fsg_num_buffers)
3472 {
3473 struct fsg_lun_config *lun;
3474 unsigned i;
3475
3476 /* Configure LUNs */
3477 cfg->nluns =
3478 min(params->luns ?: (params->file_count ?: 1u),
3479 (unsigned)FSG_MAX_LUNS);
3480 for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
3481 lun->ro = !!params->ro[i];
3482 lun->cdrom = !!params->cdrom[i];
3483 lun->removable = !!params->removable[i];
3484 lun->filename =
3485 params->file_count > i && params->file[i][0]
3486 ? params->file[i]
3487 : NULL;
3488 }
3489
3490 /* Let MSF use defaults */
3491 cfg->vendor_name = NULL;
3492 cfg->product_name = NULL;
3493
3494 cfg->ops = NULL;
3495 cfg->private_data = NULL;
3496
3497 /* Finalise */
3498 cfg->can_stall = params->stall;
3499 cfg->fsg_num_buffers = fsg_num_buffers;
3500 }
3501 EXPORT_SYMBOL_GPL(fsg_config_from_params);