Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/ak4613', 'asoc/topic...

[mirror_ubuntu-bionic-kernel.git] / drivers / usb / gadget / udc / pch_udc.c

/*
 * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/gpio.h>
#include <linux/irq.h>

/* GPIO port for VBUS detecting */
static int vbus_gpio_port = -1;         /* GPIO port number (-1:Not used) */

#define PCH_VBUS_PERIOD         3000    /* VBUS polling period (msec) */
#define PCH_VBUS_INTERVAL       10      /* VBUS polling interval (msec) */

/* Address offset of Registers */
#define UDC_EP_REG_SHIFT        0x20    /* Offset to next EP */

#define UDC_EPCTL_ADDR          0x00    /* Endpoint control */
#define UDC_EPSTS_ADDR          0x04    /* Endpoint status */
#define UDC_BUFIN_FRAMENUM_ADDR 0x08    /* buffer size in / frame number out */
#define UDC_BUFOUT_MAXPKT_ADDR  0x0C    /* buffer size out / maxpkt in */
#define UDC_SUBPTR_ADDR         0x10    /* setup buffer pointer */
#define UDC_DESPTR_ADDR         0x14    /* Data descriptor pointer */
#define UDC_CONFIRM_ADDR        0x18    /* Write/Read confirmation */

#define UDC_DEVCFG_ADDR         0x400   /* Device configuration */
#define UDC_DEVCTL_ADDR         0x404   /* Device control */
#define UDC_DEVSTS_ADDR         0x408   /* Device status */
#define UDC_DEVIRQSTS_ADDR      0x40C   /* Device irq status */
#define UDC_DEVIRQMSK_ADDR      0x410   /* Device irq mask */
#define UDC_EPIRQSTS_ADDR       0x414   /* Endpoint irq status */
#define UDC_EPIRQMSK_ADDR       0x418   /* Endpoint irq mask */
#define UDC_DEVLPM_ADDR         0x41C   /* LPM control / status */
#define UDC_CSR_BUSY_ADDR       0x4f0   /* UDC_CSR_BUSY Status register */
#define UDC_SRST_ADDR           0x4fc   /* SOFT RESET register */
#define UDC_CSR_ADDR            0x500   /* USB_DEVICE endpoint register */

/* Endpoint control register */
/* Bit position */
#define UDC_EPCTL_MRXFLUSH              (1 << 12)
#define UDC_EPCTL_RRDY                  (1 << 9)
#define UDC_EPCTL_CNAK                  (1 << 8)
#define UDC_EPCTL_SNAK                  (1 << 7)
#define UDC_EPCTL_NAK                   (1 << 6)
#define UDC_EPCTL_P                     (1 << 3)
#define UDC_EPCTL_F                     (1 << 1)
#define UDC_EPCTL_S                     (1 << 0)
#define UDC_EPCTL_ET_SHIFT              4
/* Mask patern */
#define UDC_EPCTL_ET_MASK               0x00000030
/* Value for ET field */
#define UDC_EPCTL_ET_CONTROL            0
#define UDC_EPCTL_ET_ISO                1
#define UDC_EPCTL_ET_BULK               2
#define UDC_EPCTL_ET_INTERRUPT          3

/* Endpoint status register */
/* Bit position */
#define UDC_EPSTS_XFERDONE              (1 << 27)
#define UDC_EPSTS_RSS                   (1 << 26)
#define UDC_EPSTS_RCS                   (1 << 25)
#define UDC_EPSTS_TXEMPTY               (1 << 24)
#define UDC_EPSTS_TDC                   (1 << 10)
#define UDC_EPSTS_HE                    (1 << 9)
#define UDC_EPSTS_MRXFIFO_EMP           (1 << 8)
#define UDC_EPSTS_BNA                   (1 << 7)
#define UDC_EPSTS_IN                    (1 << 6)
#define UDC_EPSTS_OUT_SHIFT             4
/* Mask patern */
#define UDC_EPSTS_OUT_MASK              0x00000030
#define UDC_EPSTS_ALL_CLR_MASK          0x1F0006F0
/* Value for OUT field */
#define UDC_EPSTS_OUT_SETUP             2
#define UDC_EPSTS_OUT_DATA              1

/* Device configuration register */
/* Bit position */
#define UDC_DEVCFG_CSR_PRG              (1 << 17)
#define UDC_DEVCFG_SP                   (1 << 3)
/* SPD Valee */
#define UDC_DEVCFG_SPD_HS               0x0
#define UDC_DEVCFG_SPD_FS               0x1
#define UDC_DEVCFG_SPD_LS               0x2

/* Device control register */
/* Bit position */
#define UDC_DEVCTL_THLEN_SHIFT          24
#define UDC_DEVCTL_BRLEN_SHIFT          16
#define UDC_DEVCTL_CSR_DONE             (1 << 13)
#define UDC_DEVCTL_SD                   (1 << 10)
#define UDC_DEVCTL_MODE                 (1 << 9)
#define UDC_DEVCTL_BREN                 (1 << 8)
#define UDC_DEVCTL_THE                  (1 << 7)
#define UDC_DEVCTL_DU                   (1 << 4)
#define UDC_DEVCTL_TDE                  (1 << 3)
#define UDC_DEVCTL_RDE                  (1 << 2)
#define UDC_DEVCTL_RES                  (1 << 0)

/* Device status register */
/* Bit position */
#define UDC_DEVSTS_TS_SHIFT             18
#define UDC_DEVSTS_ENUM_SPEED_SHIFT     13
#define UDC_DEVSTS_ALT_SHIFT            8
#define UDC_DEVSTS_INTF_SHIFT           4
#define UDC_DEVSTS_CFG_SHIFT            0
/* Mask patern */
#define UDC_DEVSTS_TS_MASK              0xfffc0000
#define UDC_DEVSTS_ENUM_SPEED_MASK      0x00006000
#define UDC_DEVSTS_ALT_MASK             0x00000f00
#define UDC_DEVSTS_INTF_MASK            0x000000f0
#define UDC_DEVSTS_CFG_MASK             0x0000000f
/* value for maximum speed for SPEED field */
#define UDC_DEVSTS_ENUM_SPEED_FULL      1
#define UDC_DEVSTS_ENUM_SPEED_HIGH      0
#define UDC_DEVSTS_ENUM_SPEED_LOW       2
#define UDC_DEVSTS_ENUM_SPEED_FULLX     3

/* Device irq register */
/* Bit position */
#define UDC_DEVINT_RWKP                 (1 << 7)
#define UDC_DEVINT_ENUM                 (1 << 6)
#define UDC_DEVINT_SOF                  (1 << 5)
#define UDC_DEVINT_US                   (1 << 4)
#define UDC_DEVINT_UR                   (1 << 3)
#define UDC_DEVINT_ES                   (1 << 2)
#define UDC_DEVINT_SI                   (1 << 1)
#define UDC_DEVINT_SC                   (1 << 0)
/* Mask patern */
#define UDC_DEVINT_MSK                  0x7f

/* Endpoint irq register */
/* Bit position */
#define UDC_EPINT_IN_SHIFT              0
#define UDC_EPINT_OUT_SHIFT             16
#define UDC_EPINT_IN_EP0                (1 << 0)
#define UDC_EPINT_OUT_EP0               (1 << 16)
/* Mask patern */
#define UDC_EPINT_MSK_DISABLE_ALL       0xffffffff

/* UDC_CSR_BUSY Status register */
/* Bit position */
#define UDC_CSR_BUSY                    (1 << 0)

/* SOFT RESET register */
/* Bit position */
#define UDC_PSRST                       (1 << 1)
#define UDC_SRST                        (1 << 0)

/* USB_DEVICE endpoint register */
/* Bit position */
#define UDC_CSR_NE_NUM_SHIFT            0
#define UDC_CSR_NE_DIR_SHIFT            4
#define UDC_CSR_NE_TYPE_SHIFT           5
#define UDC_CSR_NE_CFG_SHIFT            7
#define UDC_CSR_NE_INTF_SHIFT           11
#define UDC_CSR_NE_ALT_SHIFT            15
#define UDC_CSR_NE_MAX_PKT_SHIFT        19
/* Mask patern */
#define UDC_CSR_NE_NUM_MASK             0x0000000f
#define UDC_CSR_NE_DIR_MASK             0x00000010
#define UDC_CSR_NE_TYPE_MASK            0x00000060
#define UDC_CSR_NE_CFG_MASK             0x00000780
#define UDC_CSR_NE_INTF_MASK            0x00007800
#define UDC_CSR_NE_ALT_MASK             0x00078000
#define UDC_CSR_NE_MAX_PKT_MASK         0x3ff80000

#define PCH_UDC_CSR(ep) (UDC_CSR_ADDR + ep*4)
#define PCH_UDC_EPINT(in, num)\
                (1 << (num + (in ? UDC_EPINT_IN_SHIFT : UDC_EPINT_OUT_SHIFT)))

/* Index of endpoint */
#define UDC_EP0IN_IDX           0
#define UDC_EP0OUT_IDX          1
#define UDC_EPIN_IDX(ep)        (ep * 2)
#define UDC_EPOUT_IDX(ep)       (ep * 2 + 1)
#define PCH_UDC_EP0             0
#define PCH_UDC_EP1             1
#define PCH_UDC_EP2             2
#define PCH_UDC_EP3             3

/* Number of endpoint */
#define PCH_UDC_EP_NUM          32      /* Total number of EPs (16 IN,16 OUT) */
#define PCH_UDC_USED_EP_NUM     4       /* EP number of EP's really used */
/* Length Value */
#define PCH_UDC_BRLEN           0x0F    /* Burst length */
#define PCH_UDC_THLEN           0x1F    /* Threshold length */
/* Value of EP Buffer Size */
#define UDC_EP0IN_BUFF_SIZE     16
#define UDC_EPIN_BUFF_SIZE      256
#define UDC_EP0OUT_BUFF_SIZE    16
#define UDC_EPOUT_BUFF_SIZE     256
/* Value of EP maximum packet size */
#define UDC_EP0IN_MAX_PKT_SIZE  64
#define UDC_EP0OUT_MAX_PKT_SIZE 64
#define UDC_BULK_MAX_PKT_SIZE   512

/* DMA */
#define DMA_DIR_RX              1       /* DMA for data receive */
#define DMA_DIR_TX              2       /* DMA for data transmit */
#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
#define UDC_DMA_MAXPACKET       65536   /* maximum packet size for DMA */

/**
 * struct pch_udc_data_dma_desc - Structure to hold DMA descriptor information
 *                                for data
 * @status:             Status quadlet
 * @reserved:           Reserved
 * @dataptr:            Buffer descriptor
 * @next:               Next descriptor
 */
struct pch_udc_data_dma_desc {
        u32 status;
        u32 reserved;
        u32 dataptr;
        u32 next;
};

/**
 * struct pch_udc_stp_dma_desc - Structure to hold DMA descriptor information
 *                               for control data
 * @status:     Status
 * @reserved:   Reserved
 * @data12:     First setup word
 * @data34:     Second setup word
 */
struct pch_udc_stp_dma_desc {
        u32 status;
        u32 reserved;
        struct usb_ctrlrequest request;
} __attribute((packed));

/* DMA status definitions */
/* Buffer status */
#define PCH_UDC_BUFF_STS        0xC0000000
#define PCH_UDC_BS_HST_RDY      0x00000000
#define PCH_UDC_BS_DMA_BSY      0x40000000
#define PCH_UDC_BS_DMA_DONE     0x80000000
#define PCH_UDC_BS_HST_BSY      0xC0000000
/*  Rx/Tx Status */
#define PCH_UDC_RXTX_STS        0x30000000
#define PCH_UDC_RTS_SUCC        0x00000000
#define PCH_UDC_RTS_DESERR      0x10000000
#define PCH_UDC_RTS_BUFERR      0x30000000
/* Last Descriptor Indication */
#define PCH_UDC_DMA_LAST        0x08000000
/* Number of Rx/Tx Bytes Mask */
#define PCH_UDC_RXTX_BYTES      0x0000ffff

/**
 * struct pch_udc_cfg_data - Structure to hold current configuration
 *                           and interface information
 * @cur_cfg:    current configuration in use
 * @cur_intf:   current interface in use
 * @cur_alt:    current alt interface in use
 */
struct pch_udc_cfg_data {
        u16 cur_cfg;
        u16 cur_intf;
        u16 cur_alt;
};

/**
 * struct pch_udc_ep - Structure holding a PCH USB device Endpoint information
 * @ep:                 embedded ep request
 * @td_stp_phys:        for setup request
 * @td_data_phys:       for data request
 * @td_stp:             for setup request
 * @td_data:            for data request
 * @dev:                reference to device struct
 * @offset_addr:        offset address of ep register
 * @desc:               for this ep
 * @queue:              queue for requests
 * @num:                endpoint number
 * @in:                 endpoint is IN
 * @halted:             endpoint halted?
 * @epsts:              Endpoint status
 */
struct pch_udc_ep {
        struct usb_ep                   ep;
        dma_addr_t                      td_stp_phys;
        dma_addr_t                      td_data_phys;
        struct pch_udc_stp_dma_desc     *td_stp;
        struct pch_udc_data_dma_desc    *td_data;
        struct pch_udc_dev              *dev;
        unsigned long                   offset_addr;
        struct list_head                queue;
        unsigned                        num:5,
                                        in:1,
                                        halted:1;
        unsigned long                   epsts;
};

/**
 * struct pch_vbus_gpio_data - Structure holding GPIO informaton
 *                                      for detecting VBUS
 * @port:               gpio port number
 * @intr:               gpio interrupt number
 * @irq_work_fall       Structure for WorkQueue
 * @irq_work_rise       Structure for WorkQueue
 */
struct pch_vbus_gpio_data {
        int                     port;
        int                     intr;
        struct work_struct      irq_work_fall;
        struct work_struct      irq_work_rise;
};

/**
 * struct pch_udc_dev - Structure holding complete information
 *                      of the PCH USB device
 * @gadget:             gadget driver data
 * @driver:             reference to gadget driver bound
 * @pdev:               reference to the PCI device
 * @ep:                 array of endpoints
 * @lock:               protects all state
 * @stall:              stall requested
 * @prot_stall:         protcol stall requested
 * @registered:         driver registered with system
 * @suspended:          driver in suspended state
 * @connected:          gadget driver associated
 * @vbus_session:       required vbus_session state
 * @set_cfg_not_acked:  pending acknowledgement 4 setup
 * @waiting_zlp_ack:    pending acknowledgement 4 ZLP
 * @data_requests:      DMA pool for data requests
 * @stp_requests:       DMA pool for setup requests
 * @dma_addr:           DMA pool for received
 * @setup_data:         Received setup data
 * @base_addr:          for mapped device memory
 * @cfg_data:           current cfg, intf, and alt in use
 * @vbus_gpio:          GPIO informaton for detecting VBUS
 */
struct pch_udc_dev {
        struct usb_gadget               gadget;
        struct usb_gadget_driver        *driver;
        struct pci_dev                  *pdev;
        struct pch_udc_ep               ep[PCH_UDC_EP_NUM];
        spinlock_t                      lock; /* protects all state */
        unsigned
                        stall:1,
                        prot_stall:1,
                        suspended:1,
                        connected:1,
                        vbus_session:1,
                        set_cfg_not_acked:1,
                        waiting_zlp_ack:1;
        struct pci_pool         *data_requests;
        struct pci_pool         *stp_requests;
        dma_addr_t                      dma_addr;
        struct usb_ctrlrequest          setup_data;
        void __iomem                    *base_addr;
        struct pch_udc_cfg_data         cfg_data;
        struct pch_vbus_gpio_data       vbus_gpio;
};
#define to_pch_udc(g)   (container_of((g), struct pch_udc_dev, gadget))

#define PCH_UDC_PCI_BAR_QUARK_X1000     0
#define PCH_UDC_PCI_BAR                 1

#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC     0x0939
#define PCI_DEVICE_ID_INTEL_EG20T_UDC           0x8808

#define PCI_VENDOR_ID_ROHM              0x10DB
#define PCI_DEVICE_ID_ML7213_IOH_UDC    0x801D
#define PCI_DEVICE_ID_ML7831_IOH_UDC    0x8808

static const char       ep0_string[] = "ep0in";
static DEFINE_SPINLOCK(udc_stall_spinlock);     /* stall spin lock */
static bool speed_fs;
module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
MODULE_PARM_DESC(speed_fs, "true for Full speed operation");

/**
 * struct pch_udc_request - Structure holding a PCH USB device request packet
 * @req:                embedded ep request
 * @td_data_phys:       phys. address
 * @td_data:            first dma desc. of chain
 * @td_data_last:       last dma desc. of chain
 * @queue:              associated queue
 * @dma_going:          DMA in progress for request
 * @dma_mapped:         DMA memory mapped for request
 * @dma_done:           DMA completed for request
 * @chain_len:          chain length
 * @buf:                Buffer memory for align adjustment
 * @dma:                DMA memory for align adjustment
 */
struct pch_udc_request {
        struct usb_request              req;
        dma_addr_t                      td_data_phys;
        struct pch_udc_data_dma_desc    *td_data;
        struct pch_udc_data_dma_desc    *td_data_last;
        struct list_head                queue;
        unsigned                        dma_going:1,
                                        dma_mapped:1,
                                        dma_done:1;
        unsigned                        chain_len;
        void                            *buf;
        dma_addr_t                      dma;
};

static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg)
{
        return ioread32(dev->base_addr + reg);
}

static inline void pch_udc_writel(struct pch_udc_dev *dev,
                                    unsigned long val, unsigned long reg)
{
        iowrite32(val, dev->base_addr + reg);
}

static inline void pch_udc_bit_set(struct pch_udc_dev *dev,
                                     unsigned long reg,
                                     unsigned long bitmask)
{
        pch_udc_writel(dev, pch_udc_readl(dev, reg) | bitmask, reg);
}

static inline void pch_udc_bit_clr(struct pch_udc_dev *dev,
                                     unsigned long reg,
                                     unsigned long bitmask)
{
        pch_udc_writel(dev, pch_udc_readl(dev, reg) & ~(bitmask), reg);
}

static inline u32 pch_udc_ep_readl(struct pch_udc_ep *ep, unsigned long reg)
{
        return ioread32(ep->dev->base_addr + ep->offset_addr + reg);
}

static inline void pch_udc_ep_writel(struct pch_udc_ep *ep,
                                    unsigned long val, unsigned long reg)
{
        iowrite32(val, ep->dev->base_addr + ep->offset_addr + reg);
}

static inline void pch_udc_ep_bit_set(struct pch_udc_ep *ep,
                                     unsigned long reg,
                                     unsigned long bitmask)
{
        pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) | bitmask, reg);
}

static inline void pch_udc_ep_bit_clr(struct pch_udc_ep *ep,
                                     unsigned long reg,
                                     unsigned long bitmask)
{
        pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) & ~(bitmask), reg);
}

/**
 * pch_udc_csr_busy() - Wait till idle.
 * @dev:        Reference to pch_udc_dev structure
 */
static void pch_udc_csr_busy(struct pch_udc_dev *dev)
{
        unsigned int count = 200;

        /* Wait till idle */
        while ((pch_udc_readl(dev, UDC_CSR_BUSY_ADDR) & UDC_CSR_BUSY)
                && --count)
                cpu_relax();
        if (!count)
                dev_err(&dev->pdev->dev, "%s: wait error\n", __func__);
}

/**
 * pch_udc_write_csr() - Write the command and status registers.
 * @dev:        Reference to pch_udc_dev structure
 * @val:        value to be written to CSR register
 * @addr:       address of CSR register
 */
static void pch_udc_write_csr(struct pch_udc_dev *dev, unsigned long val,
                               unsigned int ep)
{
        unsigned long reg = PCH_UDC_CSR(ep);

        pch_udc_csr_busy(dev);          /* Wait till idle */
        pch_udc_writel(dev, val, reg);
        pch_udc_csr_busy(dev);          /* Wait till idle */
}

/**
 * pch_udc_read_csr() - Read the command and status registers.
 * @dev:        Reference to pch_udc_dev structure
 * @addr:       address of CSR register
 *
 * Return codes:        content of CSR register
 */
static u32 pch_udc_read_csr(struct pch_udc_dev *dev, unsigned int ep)
{
        unsigned long reg = PCH_UDC_CSR(ep);

        pch_udc_csr_busy(dev);          /* Wait till idle */
        pch_udc_readl(dev, reg);        /* Dummy read */
        pch_udc_csr_busy(dev);          /* Wait till idle */
        return pch_udc_readl(dev, reg);
}

/**
 * pch_udc_rmt_wakeup() - Initiate for remote wakeup
 * @dev:        Reference to pch_udc_dev structure
 */
static inline void pch_udc_rmt_wakeup(struct pch_udc_dev *dev)
{
        pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
        mdelay(1);
        pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
}

/**
 * pch_udc_get_frame() - Get the current frame from device status register
 * @dev:        Reference to pch_udc_dev structure
 * Retern       current frame
 */
static inline int pch_udc_get_frame(struct pch_udc_dev *dev)
{
        u32 frame = pch_udc_readl(dev, UDC_DEVSTS_ADDR);
        return (frame & UDC_DEVSTS_TS_MASK) >> UDC_DEVSTS_TS_SHIFT;
}

/**
 * pch_udc_clear_selfpowered() - Clear the self power control
 * @dev:        Reference to pch_udc_regs structure
 */
static inline void pch_udc_clear_selfpowered(struct pch_udc_dev *dev)
{
        pch_udc_bit_clr(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
}

/**
 * pch_udc_set_selfpowered() - Set the self power control
 * @dev:        Reference to pch_udc_regs structure
 */
static inline void pch_udc_set_selfpowered(struct pch_udc_dev *dev)
{
        pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
}

/**
 * pch_udc_set_disconnect() - Set the disconnect status.
 * @dev:        Reference to pch_udc_regs structure
 */
static inline void pch_udc_set_disconnect(struct pch_udc_dev *dev)
{
        pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
}

/**
 * pch_udc_clear_disconnect() - Clear the disconnect status.
 * @dev:        Reference to pch_udc_regs structure
 */
static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
{
        /* Clear the disconnect */
        pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
        pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
        mdelay(1);
        /* Resume USB signalling */
        pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
}

/**
 * pch_udc_reconnect() - This API initializes usb device controller,
 *                                              and clear the disconnect status.
 * @dev:                Reference to pch_udc_regs structure
 */
static void pch_udc_init(struct pch_udc_dev *dev);
static void pch_udc_reconnect(struct pch_udc_dev *dev)
{
        pch_udc_init(dev);

        /* enable device interrupts */
        /* pch_udc_enable_interrupts() */
        pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR,
                        UDC_DEVINT_UR | UDC_DEVINT_ENUM);

        /* Clear the disconnect */
        pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
        pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
        mdelay(1);
        /* Resume USB signalling */
        pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
}

/**
 * pch_udc_vbus_session() - set or clearr the disconnect status.
 * @dev:        Reference to pch_udc_regs structure
 * @is_active:  Parameter specifying the action
 *                0:   indicating VBUS power is ending
 *                !0:  indicating VBUS power is starting
 */
static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
                                          int is_active)
{
        if (is_active) {
                pch_udc_reconnect(dev);
                dev->vbus_session = 1;
        } else {
                if (dev->driver && dev->driver->disconnect) {
                        spin_lock(&dev->lock);
                        dev->driver->disconnect(&dev->gadget);
                        spin_unlock(&dev->lock);
                }
                pch_udc_set_disconnect(dev);
                dev->vbus_session = 0;
        }
}

/**
 * pch_udc_ep_set_stall() - Set the stall of endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 */
static void pch_udc_ep_set_stall(struct pch_udc_ep *ep)
{
        if (ep->in) {
                pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
                pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
        } else {
                pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
        }
}

/**
 * pch_udc_ep_clear_stall() - Clear the stall of endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 */
static inline void pch_udc_ep_clear_stall(struct pch_udc_ep *ep)
{
        /* Clear the stall */
        pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
        /* Clear NAK by writing CNAK */
        pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
}

/**
 * pch_udc_ep_set_trfr_type() - Set the transfer type of endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * @type:       Type of endpoint
 */
static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep,
                                        u8 type)
{
        pch_udc_ep_writel(ep, ((type << UDC_EPCTL_ET_SHIFT) &
                                UDC_EPCTL_ET_MASK), UDC_EPCTL_ADDR);
}

/**
 * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * @buf_size:   The buffer word size
 */
static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep,
                                                 u32 buf_size, u32 ep_in)
{
        u32 data;
        if (ep_in) {
                data = pch_udc_ep_readl(ep, UDC_BUFIN_FRAMENUM_ADDR);
                data = (data & 0xffff0000) | (buf_size & 0xffff);
                pch_udc_ep_writel(ep, data, UDC_BUFIN_FRAMENUM_ADDR);
        } else {
                data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
                data = (buf_size << 16) | (data & 0xffff);
                pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
        }
}

/**
 * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * @pkt_size:   The packet byte size
 */
static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size)
{
        u32 data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
        data = (data & 0xffff0000) | (pkt_size & 0xffff);
        pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
}

/**
 * pch_udc_ep_set_subptr() - Set the Setup buffer pointer for the endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * @addr:       Address of the register
 */
static inline void pch_udc_ep_set_subptr(struct pch_udc_ep *ep, u32 addr)
{
        pch_udc_ep_writel(ep, addr, UDC_SUBPTR_ADDR);
}

/**
 * pch_udc_ep_set_ddptr() - Set the Data descriptor pointer for the endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * @addr:       Address of the register
 */
static inline void pch_udc_ep_set_ddptr(struct pch_udc_ep *ep, u32 addr)
{
        pch_udc_ep_writel(ep, addr, UDC_DESPTR_ADDR);
}

/**
 * pch_udc_ep_set_pd() - Set the poll demand bit for the endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 */
static inline void pch_udc_ep_set_pd(struct pch_udc_ep *ep)
{
        pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_P);
}

/**
 * pch_udc_ep_set_rrdy() - Set the receive ready bit for the endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 */
static inline void pch_udc_ep_set_rrdy(struct pch_udc_ep *ep)
{
        pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
}

/**
 * pch_udc_ep_clear_rrdy() - Clear the receive ready bit for the endpoint
 * @ep:         Reference to structure of type pch_udc_ep_regs
 */
static inline void pch_udc_ep_clear_rrdy(struct pch_udc_ep *ep)
{
        pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
}

/**
 * pch_udc_set_dma() - Set the 'TDE' or RDE bit of device control
 *                      register depending on the direction specified
 * @dev:        Reference to structure of type pch_udc_regs
 * @dir:        whether Tx or Rx
 *                DMA_DIR_RX: Receive
 *                DMA_DIR_TX: Transmit
 */
static inline void pch_udc_set_dma(struct pch_udc_dev *dev, int dir)
{
        if (dir == DMA_DIR_RX)
                pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
        else if (dir == DMA_DIR_TX)
                pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
}

/**
 * pch_udc_clear_dma() - Clear the 'TDE' or RDE bit of device control
 *                               register depending on the direction specified
 * @dev:        Reference to structure of type pch_udc_regs
 * @dir:        Whether Tx or Rx
 *                DMA_DIR_RX: Receive
 *                DMA_DIR_TX: Transmit
 */
static inline void pch_udc_clear_dma(struct pch_udc_dev *dev, int dir)
{
        if (dir == DMA_DIR_RX)
                pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
        else if (dir == DMA_DIR_TX)
                pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
}

/**
 * pch_udc_set_csr_done() - Set the device control register
 *                              CSR done field (bit 13)
 * @dev:        reference to structure of type pch_udc_regs
 */
static inline void pch_udc_set_csr_done(struct pch_udc_dev *dev)
{
        pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_CSR_DONE);
}

/**
 * pch_udc_disable_interrupts() - Disables the specified interrupts
 * @dev:        Reference to structure of type pch_udc_regs
 * @mask:       Mask to disable interrupts
 */
static inline void pch_udc_disable_interrupts(struct pch_udc_dev *dev,
                                            u32 mask)
{
        pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, mask);
}

/**
 * pch_udc_enable_interrupts() - Enable the specified interrupts
 * @dev:        Reference to structure of type pch_udc_regs
 * @mask:       Mask to enable interrupts
 */
static inline void pch_udc_enable_interrupts(struct pch_udc_dev *dev,
                                           u32 mask)
{
        pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR, mask);
}

/**
 * pch_udc_disable_ep_interrupts() - Disable endpoint interrupts
 * @dev:        Reference to structure of type pch_udc_regs
 * @mask:       Mask to disable interrupts
 */
static inline void pch_udc_disable_ep_interrupts(struct pch_udc_dev *dev,
                                                u32 mask)
{
        pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, mask);
}

/**
 * pch_udc_enable_ep_interrupts() - Enable endpoint interrupts
 * @dev:        Reference to structure of type pch_udc_regs
 * @mask:       Mask to enable interrupts
 */
static inline void pch_udc_enable_ep_interrupts(struct pch_udc_dev *dev,
                                              u32 mask)
{
        pch_udc_bit_clr(dev, UDC_EPIRQMSK_ADDR, mask);
}

/**
 * pch_udc_read_device_interrupts() - Read the device interrupts
 * @dev:        Reference to structure of type pch_udc_regs
 * Retern       The device interrupts
 */
static inline u32 pch_udc_read_device_interrupts(struct pch_udc_dev *dev)
{
        return pch_udc_readl(dev, UDC_DEVIRQSTS_ADDR);
}

/**
 * pch_udc_write_device_interrupts() - Write device interrupts
 * @dev:        Reference to structure of type pch_udc_regs
 * @val:        The value to be written to interrupt register
 */
static inline void pch_udc_write_device_interrupts(struct pch_udc_dev *dev,
                                                     u32 val)
{
        pch_udc_writel(dev, val, UDC_DEVIRQSTS_ADDR);
}

/**
 * pch_udc_read_ep_interrupts() - Read the endpoint interrupts
 * @dev:        Reference to structure of type pch_udc_regs
 * Retern       The endpoint interrupt
 */
static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
{
        return pch_udc_readl(dev, UDC_EPIRQSTS_ADDR);
}

/**
 * pch_udc_write_ep_interrupts() - Clear endpoint interupts
 * @dev:        Reference to structure of type pch_udc_regs
 * @val:        The value to be written to interrupt register
 */
static inline void pch_udc_write_ep_interrupts(struct pch_udc_dev *dev,
                                             u32 val)
{
        pch_udc_writel(dev, val, UDC_EPIRQSTS_ADDR);
}

/**
 * pch_udc_read_device_status() - Read the device status
 * @dev:        Reference to structure of type pch_udc_regs
 * Retern       The device status
 */
static inline u32 pch_udc_read_device_status(struct pch_udc_dev *dev)
{
        return pch_udc_readl(dev, UDC_DEVSTS_ADDR);
}

/**
 * pch_udc_read_ep_control() - Read the endpoint control
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * Retern       The endpoint control register value
 */
static inline u32 pch_udc_read_ep_control(struct pch_udc_ep *ep)
{
        return pch_udc_ep_readl(ep, UDC_EPCTL_ADDR);
}

/**
 * pch_udc_clear_ep_control() - Clear the endpoint control register
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * Retern       The endpoint control register value
 */
static inline void pch_udc_clear_ep_control(struct pch_udc_ep *ep)
{
        return pch_udc_ep_writel(ep, 0, UDC_EPCTL_ADDR);
}

/**
 * pch_udc_read_ep_status() - Read the endpoint status
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * Retern       The endpoint status
 */
static inline u32 pch_udc_read_ep_status(struct pch_udc_ep *ep)
{
        return pch_udc_ep_readl(ep, UDC_EPSTS_ADDR);
}

/**
 * pch_udc_clear_ep_status() - Clear the endpoint status
 * @ep:         Reference to structure of type pch_udc_ep_regs
 * @stat:       Endpoint status
 */
static inline void pch_udc_clear_ep_status(struct pch_udc_ep *ep,
                                         u32 stat)
{
        return pch_udc_ep_writel(ep, stat, UDC_EPSTS_ADDR);
}

/**
 * pch_udc_ep_set_nak() - Set the bit 7 (SNAK field)
 *                              of the endpoint control register
 * @ep:         Reference to structure of type pch_udc_ep_regs
 */
static inline void pch_udc_ep_set_nak(struct pch_udc_ep *ep)
{
        pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_SNAK);
}

/**
 * pch_udc_ep_clear_nak() - Set the bit 8 (CNAK field)
 *                              of the endpoint control register
 * @ep:         reference to structure of type pch_udc_ep_regs
 */
static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep)
{
        unsigned int loopcnt = 0;
        struct pch_udc_dev *dev = ep->dev;

        if (!(pch_udc_ep_readl(ep, UDC_EPCTL_ADDR) & UDC_EPCTL_NAK))
                return;
        if (!ep->in) {
                loopcnt = 10000;
                while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
                        --loopcnt)
                        udelay(5);
                if (!loopcnt)
                        dev_err(&dev->pdev->dev, "%s: RxFIFO not Empty\n",
                                __func__);
        }
        loopcnt = 10000;
        while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_NAK) && --loopcnt) {
                pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
                udelay(5);
        }
        if (!loopcnt)
                dev_err(&dev->pdev->dev, "%s: Clear NAK not set for ep%d%s\n",
                        __func__, ep->num, (ep->in ? "in" : "out"));
}

/**
 * pch_udc_ep_fifo_flush() - Flush the endpoint fifo
 * @ep: reference to structure of type pch_udc_ep_regs
 * @dir:        direction of endpoint
 *                0:  endpoint is OUT
 *                !0: endpoint is IN
 */
static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir)
{
        if (dir) {      /* IN ep */
                pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
                return;
        }
}

/**
 * pch_udc_ep_enable() - This api enables endpoint
 * @regs:       Reference to structure pch_udc_ep_regs
 * @desc:       endpoint descriptor
 */
static void pch_udc_ep_enable(struct pch_udc_ep *ep,
                               struct pch_udc_cfg_data *cfg,
                               const struct usb_endpoint_descriptor *desc)
{
        u32 val = 0;
        u32 buff_size = 0;

        pch_udc_ep_set_trfr_type(ep, desc->bmAttributes);
        if (ep->in)
                buff_size = UDC_EPIN_BUFF_SIZE;
        else
                buff_size = UDC_EPOUT_BUFF_SIZE;
        pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
        pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc));
        pch_udc_ep_set_nak(ep);
        pch_udc_ep_fifo_flush(ep, ep->in);
        /* Configure the endpoint */
        val = ep->num << UDC_CSR_NE_NUM_SHIFT | ep->in << UDC_CSR_NE_DIR_SHIFT |
              ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) <<
                UDC_CSR_NE_TYPE_SHIFT) |
              (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
              (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
              (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
              usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT;

        if (ep->in)
                pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
        else
                pch_udc_write_csr(ep->dev, val, UDC_EPOUT_IDX(ep->num));
}

/**
 * pch_udc_ep_disable() - This api disables endpoint
 * @regs:       Reference to structure pch_udc_ep_regs
 */
static void pch_udc_ep_disable(struct pch_udc_ep *ep)
{
        if (ep->in) {
                /* flush the fifo */
                pch_udc_ep_writel(ep, UDC_EPCTL_F, UDC_EPCTL_ADDR);
                /* set NAK */
                pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
                pch_udc_ep_bit_set(ep, UDC_EPSTS_ADDR, UDC_EPSTS_IN);
        } else {
                /* set NAK */
                pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
        }
        /* reset desc pointer */
        pch_udc_ep_writel(ep, 0, UDC_DESPTR_ADDR);
}

/**
 * pch_udc_wait_ep_stall() - Wait EP stall.
 * @dev:        Reference to pch_udc_dev structure
 */
static void pch_udc_wait_ep_stall(struct pch_udc_ep *ep)
{
        unsigned int count = 10000;

        /* Wait till idle */
        while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_S) && --count)
                udelay(5);
        if (!count)
                dev_err(&ep->dev->pdev->dev, "%s: wait error\n", __func__);
}

/**
 * pch_udc_init() - This API initializes usb device controller
 * @dev:        Rreference to pch_udc_regs structure
 */
static void pch_udc_init(struct pch_udc_dev *dev)
{
        if (NULL == dev) {
                pr_err("%s: Invalid address\n", __func__);
                return;
        }
        /* Soft Reset and Reset PHY */
        pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
        pch_udc_writel(dev, UDC_SRST | UDC_PSRST, UDC_SRST_ADDR);
        mdelay(1);
        pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
        pch_udc_writel(dev, 0x00, UDC_SRST_ADDR);
        mdelay(1);
        /* mask and clear all device interrupts */
        pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
        pch_udc_bit_set(dev, UDC_DEVIRQSTS_ADDR, UDC_DEVINT_MSK);

        /* mask and clear all ep interrupts */
        pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
        pch_udc_bit_set(dev, UDC_EPIRQSTS_ADDR, UDC_EPINT_MSK_DISABLE_ALL);

        /* enable dynamic CSR programmingi, self powered and device speed */
        if (speed_fs)
                pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
                                UDC_DEVCFG_SP | UDC_DEVCFG_SPD_FS);
        else /* defaul high speed */
                pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
                                UDC_DEVCFG_SP | UDC_DEVCFG_SPD_HS);
        pch_udc_bit_set(dev, UDC_DEVCTL_ADDR,
                        (PCH_UDC_THLEN << UDC_DEVCTL_THLEN_SHIFT) |
                        (PCH_UDC_BRLEN << UDC_DEVCTL_BRLEN_SHIFT) |
                        UDC_DEVCTL_MODE | UDC_DEVCTL_BREN |
                        UDC_DEVCTL_THE);
}

/**
 * pch_udc_exit() - This API exit usb device controller
 * @dev:        Reference to pch_udc_regs structure
 */
static void pch_udc_exit(struct pch_udc_dev *dev)
{
        /* mask all device interrupts */
        pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
        /* mask all ep interrupts */
        pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
        /* put device in disconnected state */
        pch_udc_set_disconnect(dev);
}

/**
 * pch_udc_pcd_get_frame() - This API is invoked to get the current frame number
 * @gadget:     Reference to the gadget driver
 *
 * Return codes:
 *      0:              Success
 *      -EINVAL:        If the gadget passed is NULL
 */
static int pch_udc_pcd_get_frame(struct usb_gadget *gadget)
{
        struct pch_udc_dev      *dev;

        if (!gadget)
                return -EINVAL;
        dev = container_of(gadget, struct pch_udc_dev, gadget);
        return pch_udc_get_frame(dev);
}

/**
 * pch_udc_pcd_wakeup() - This API is invoked to initiate a remote wakeup
 * @gadget:     Reference to the gadget driver
 *
 * Return codes:
 *      0:              Success
 *      -EINVAL:        If the gadget passed is NULL
 */
static int pch_udc_pcd_wakeup(struct usb_gadget *gadget)
{
        struct pch_udc_dev      *dev;
        unsigned long           flags;

        if (!gadget)
                return -EINVAL;
        dev = container_of(gadget, struct pch_udc_dev, gadget);
        spin_lock_irqsave(&dev->lock, flags);
        pch_udc_rmt_wakeup(dev);
        spin_unlock_irqrestore(&dev->lock, flags);
        return 0;
}

/**
 * pch_udc_pcd_selfpowered() - This API is invoked to specify whether the device
 *                              is self powered or not
 * @gadget:     Reference to the gadget driver
 * @value:      Specifies self powered or not
 *
 * Return codes:
 *      0:              Success
 *      -EINVAL:        If the gadget passed is NULL
 */
static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value)
{
        struct pch_udc_dev      *dev;

        if (!gadget)
                return -EINVAL;
        gadget->is_selfpowered = (value != 0);
        dev = container_of(gadget, struct pch_udc_dev, gadget);
        if (value)
                pch_udc_set_selfpowered(dev);
        else
                pch_udc_clear_selfpowered(dev);
        return 0;
}

/**
 * pch_udc_pcd_pullup() - This API is invoked to make the device
 *                              visible/invisible to the host
 * @gadget:     Reference to the gadget driver
 * @is_on:      Specifies whether the pull up is made active or inactive
 *
 * Return codes:
 *      0:              Success
 *      -EINVAL:        If the gadget passed is NULL
 */
static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
{
        struct pch_udc_dev      *dev;

        if (!gadget)
                return -EINVAL;
        dev = container_of(gadget, struct pch_udc_dev, gadget);
        if (is_on) {
                pch_udc_reconnect(dev);
        } else {
                if (dev->driver && dev->driver->disconnect) {
                        spin_lock(&dev->lock);
                        dev->driver->disconnect(&dev->gadget);
                        spin_unlock(&dev->lock);
                }
                pch_udc_set_disconnect(dev);
        }

        return 0;
}

/**
 * pch_udc_pcd_vbus_session() - This API is used by a driver for an external
 *                              transceiver (or GPIO) that
 *                              detects a VBUS power session starting/ending
 * @gadget:     Reference to the gadget driver
 * @is_active:  specifies whether the session is starting or ending
 *
 * Return codes:
 *      0:              Success
 *      -EINVAL:        If the gadget passed is NULL
 */
static int pch_udc_pcd_vbus_session(struct usb_gadget *gadget, int is_active)
{
        struct pch_udc_dev      *dev;

        if (!gadget)
                return -EINVAL;
        dev = container_of(gadget, struct pch_udc_dev, gadget);
        pch_udc_vbus_session(dev, is_active);
        return 0;
}

/**
 * pch_udc_pcd_vbus_draw() - This API is used by gadget drivers during
 *                              SET_CONFIGURATION calls to
 *                              specify how much power the device can consume
 * @gadget:     Reference to the gadget driver
 * @mA:         specifies the current limit in 2mA unit
 *
 * Return codes:
 *      -EINVAL:        If the gadget passed is NULL
 *      -EOPNOTSUPP:
 */
static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
{
        return -EOPNOTSUPP;
}

static int pch_udc_start(struct usb_gadget *g,
                struct usb_gadget_driver *driver);
static int pch_udc_stop(struct usb_gadget *g);

static const struct usb_gadget_ops pch_udc_ops = {
        .get_frame = pch_udc_pcd_get_frame,
        .wakeup = pch_udc_pcd_wakeup,
        .set_selfpowered = pch_udc_pcd_selfpowered,
        .pullup = pch_udc_pcd_pullup,
        .vbus_session = pch_udc_pcd_vbus_session,
        .vbus_draw = pch_udc_pcd_vbus_draw,
        .udc_start = pch_udc_start,
        .udc_stop = pch_udc_stop,
};

/**
 * pch_vbus_gpio_get_value() - This API gets value of GPIO port as VBUS status.
 * @dev:        Reference to the driver structure
 *
 * Return value:
 *      1: VBUS is high
 *      0: VBUS is low
 *     -1: It is not enable to detect VBUS using GPIO
 */
static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev)
{
        int vbus = 0;

        if (dev->vbus_gpio.port)
                vbus = gpio_get_value(dev->vbus_gpio.port) ? 1 : 0;
        else
                vbus = -1;

        return vbus;
}

/**
 * pch_vbus_gpio_work_fall() - This API keeps watch on VBUS becoming Low.
 *                             If VBUS is Low, disconnect is processed
 * @irq_work:   Structure for WorkQueue
 *
 */
static void pch_vbus_gpio_work_fall(struct work_struct *irq_work)
{
        struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work,
                struct pch_vbus_gpio_data, irq_work_fall);
        struct pch_udc_dev *dev =
                container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio);
        int vbus_saved = -1;
        int vbus;
        int count;

        if (!dev->vbus_gpio.port)
                return;

        for (count = 0; count < (PCH_VBUS_PERIOD / PCH_VBUS_INTERVAL);
                count++) {
                vbus = pch_vbus_gpio_get_value(dev);

                if ((vbus_saved == vbus) && (vbus == 0)) {
                        dev_dbg(&dev->pdev->dev, "VBUS fell");
                        if (dev->driver
                                && dev->driver->disconnect) {
                                dev->driver->disconnect(
                                        &dev->gadget);
                        }
                        if (dev->vbus_gpio.intr)
                                pch_udc_init(dev);
                        else
                                pch_udc_reconnect(dev);
                        return;
                }
                vbus_saved = vbus;
                mdelay(PCH_VBUS_INTERVAL);
        }
}

/**
 * pch_vbus_gpio_work_rise() - This API checks VBUS is High.
 *                             If VBUS is High, connect is processed
 * @irq_work:   Structure for WorkQueue
 *
 */
static void pch_vbus_gpio_work_rise(struct work_struct *irq_work)
{
        struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work,
                struct pch_vbus_gpio_data, irq_work_rise);
        struct pch_udc_dev *dev =
                container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio);
        int vbus;

        if (!dev->vbus_gpio.port)
                return;

        mdelay(PCH_VBUS_INTERVAL);
        vbus = pch_vbus_gpio_get_value(dev);

        if (vbus == 1) {
                dev_dbg(&dev->pdev->dev, "VBUS rose");
                pch_udc_reconnect(dev);
                return;
        }
}

/**
 * pch_vbus_gpio_irq() - IRQ handler for GPIO intrerrupt for changing VBUS
 * @irq:        Interrupt request number
 * @dev:        Reference to the device structure
 *
 * Return codes:
 *      0: Success
 *      -EINVAL: GPIO port is invalid or can't be initialized.
 */
static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
{
        struct pch_udc_dev *dev = (struct pch_udc_dev *)data;

        if (!dev->vbus_gpio.port || !dev->vbus_gpio.intr)
                return IRQ_NONE;

        if (pch_vbus_gpio_get_value(dev))
                schedule_work(&dev->vbus_gpio.irq_work_rise);
        else
                schedule_work(&dev->vbus_gpio.irq_work_fall);

        return IRQ_HANDLED;
}

/**
 * pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
 * @dev:        Reference to the driver structure
 * @vbus_gpio   Number of GPIO port to detect gpio
 *
 * Return codes:
 *      0: Success
 *      -EINVAL: GPIO port is invalid or can't be initialized.
 */
static int pch_vbus_gpio_init(struct pch_udc_dev *dev, int vbus_gpio_port)
{
        int err;
        int irq_num = 0;

        dev->vbus_gpio.port = 0;
        dev->vbus_gpio.intr = 0;

        if (vbus_gpio_port <= -1)
                return -EINVAL;

        err = gpio_is_valid(vbus_gpio_port);
        if (!err) {
                pr_err("%s: gpio port %d is invalid\n",
                        __func__, vbus_gpio_port);
                return -EINVAL;
        }

        err = gpio_request(vbus_gpio_port, "pch_vbus");
        if (err) {
                pr_err("%s: can't request gpio port %d, err: %d\n",
                        __func__, vbus_gpio_port, err);
                return -EINVAL;
        }

        dev->vbus_gpio.port = vbus_gpio_port;
        gpio_direction_input(vbus_gpio_port);
        INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall);

        irq_num = gpio_to_irq(vbus_gpio_port);
        if (irq_num > 0) {
                irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH);
                err = request_irq(irq_num, pch_vbus_gpio_irq, 0,
                        "vbus_detect", dev);
                if (!err) {
                        dev->vbus_gpio.intr = irq_num;
                        INIT_WORK(&dev->vbus_gpio.irq_work_rise,
                                pch_vbus_gpio_work_rise);
                } else {
                        pr_err("%s: can't request irq %d, err: %d\n",
                                __func__, irq_num, err);
                }
        }

        return 0;
}

/**
 * pch_vbus_gpio_free() - This API frees resources of GPIO port
 * @dev:        Reference to the driver structure
 */
static void pch_vbus_gpio_free(struct pch_udc_dev *dev)
{
        if (dev->vbus_gpio.intr)
                free_irq(dev->vbus_gpio.intr, dev);

        if (dev->vbus_gpio.port)
                gpio_free(dev->vbus_gpio.port);
}

/**
 * complete_req() - This API is invoked from the driver when processing
 *                      of a request is complete
 * @ep:         Reference to the endpoint structure
 * @req:        Reference to the request structure
 * @status:     Indicates the success/failure of completion
 */
static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
                                                                 int status)
        __releases(&dev->lock)
        __acquires(&dev->lock)
{
        struct pch_udc_dev      *dev;
        unsigned halted = ep->halted;

        list_del_init(&req->queue);

        /* set new status if pending */
        if (req->req.status == -EINPROGRESS)
                req->req.status = status;
        else
                status = req->req.status;

        dev = ep->dev;
        if (req->dma_mapped) {
                if (req->dma == DMA_ADDR_INVALID) {
                        if (ep->in)
                                dma_unmap_single(&dev->pdev->dev, req->req.dma,
                                                 req->req.length,
                                                 DMA_TO_DEVICE);
                        else
                                dma_unmap_single(&dev->pdev->dev, req->req.dma,
                                                 req->req.length,
                                                 DMA_FROM_DEVICE);
                        req->req.dma = DMA_ADDR_INVALID;
                } else {
                        if (ep->in)
                                dma_unmap_single(&dev->pdev->dev, req->dma,
                                                 req->req.length,
                                                 DMA_TO_DEVICE);
                        else {
                                dma_unmap_single(&dev->pdev->dev, req->dma,
                                                 req->req.length,
                                                 DMA_FROM_DEVICE);
                                memcpy(req->req.buf, req->buf, req->req.length);
                        }
                        kfree(req->buf);
                        req->dma = DMA_ADDR_INVALID;
                }
                req->dma_mapped = 0;
        }
        ep->halted = 1;
        spin_unlock(&dev->lock);
        if (!ep->in)
                pch_udc_ep_clear_rrdy(ep);
        usb_gadget_giveback_request(&ep->ep, &req->req);
        spin_lock(&dev->lock);
        ep->halted = halted;
}

/**
 * empty_req_queue() - This API empties the request queue of an endpoint
 * @ep:         Reference to the endpoint structure
 */
static void empty_req_queue(struct pch_udc_ep *ep)
{
        struct pch_udc_request  *req;

        ep->halted = 1;
        while (!list_empty(&ep->queue)) {
                req = list_entry(ep->queue.next, struct pch_udc_request, queue);
                complete_req(ep, req, -ESHUTDOWN);      /* Remove from list */
        }
}

/**
 * pch_udc_free_dma_chain() - This function frees the DMA chain created
 *                              for the request
 * @dev         Reference to the driver structure
 * @req         Reference to the request to be freed
 *
 * Return codes:
 *      0: Success
 */
static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
                                   struct pch_udc_request *req)
{
        struct pch_udc_data_dma_desc *td = req->td_data;
        unsigned i = req->chain_len;

        dma_addr_t addr2;
        dma_addr_t addr = (dma_addr_t)td->next;
        td->next = 0x00;
        for (; i > 1; --i) {
                /* do not free first desc., will be done by free for request */
                td = phys_to_virt(addr);
                addr2 = (dma_addr_t)td->next;
                pci_pool_free(dev->data_requests, td, addr);
                addr = addr2;
        }
        req->chain_len = 1;
}

/**
 * pch_udc_create_dma_chain() - This function creates or reinitializes
 *                              a DMA chain
 * @ep:         Reference to the endpoint structure
 * @req:        Reference to the request
 * @buf_len:    The buffer length
 * @gfp_flags:  Flags to be used while mapping the data buffer
 *
 * Return codes:
 *      0:              success,
 *      -ENOMEM:        pci_pool_alloc invocation fails
 */
static int pch_udc_create_dma_chain(struct pch_udc_ep *ep,
                                    struct pch_udc_request *req,
                                    unsigned long buf_len,
                                    gfp_t gfp_flags)
{
        struct pch_udc_data_dma_desc *td = req->td_data, *last;
        unsigned long bytes = req->req.length, i = 0;
        dma_addr_t dma_addr;
        unsigned len = 1;

        if (req->chain_len > 1)
                pch_udc_free_dma_chain(ep->dev, req);

        if (req->dma == DMA_ADDR_INVALID)
                td->dataptr = req->req.dma;
        else
                td->dataptr = req->dma;

        td->status = PCH_UDC_BS_HST_BSY;
        for (; ; bytes -= buf_len, ++len) {
                td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes);
                if (bytes <= buf_len)
                        break;
                last = td;
                td = pci_pool_alloc(ep->dev->data_requests, gfp_flags,
                                    &dma_addr);
                if (!td)
                        goto nomem;
                i += buf_len;
                td->dataptr = req->td_data->dataptr + i;
                last->next = dma_addr;
        }

        req->td_data_last = td;
        td->status |= PCH_UDC_DMA_LAST;
        td->next = req->td_data_phys;
        req->chain_len = len;
        return 0;

nomem:
        if (len > 1) {
                req->chain_len = len;
                pch_udc_free_dma_chain(ep->dev, req);
        }
        req->chain_len = 1;
        return -ENOMEM;
}

/**
 * prepare_dma() - This function creates and initializes the DMA chain
 *                      for the request
 * @ep:         Reference to the endpoint structure
 * @req:        Reference to the request
 * @gfp:        Flag to be used while mapping the data buffer
 *
 * Return codes:
 *      0:              Success
 *      Other 0:        linux error number on failure
 */
static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req,
                          gfp_t gfp)
{
        int     retval;

        /* Allocate and create a DMA chain */
        retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
        if (retval) {
                pr_err("%s: could not create DMA chain:%d\n", __func__, retval);
                return retval;
        }
        if (ep->in)
                req->td_data->status = (req->td_data->status &
                                ~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_RDY;
        return 0;
}

/**
 * process_zlp() - This function process zero length packets
 *                      from the gadget driver
 * @ep:         Reference to the endpoint structure
 * @req:        Reference to the request
 */
static void process_zlp(struct pch_udc_ep *ep, struct pch_udc_request *req)
{
        struct pch_udc_dev      *dev = ep->dev;

        /* IN zlp's are handled by hardware */
        complete_req(ep, req, 0);

        /* if set_config or set_intf is waiting for ack by zlp
         * then set CSR_DONE
         */
        if (dev->set_cfg_not_acked) {
                pch_udc_set_csr_done(dev);
                dev->set_cfg_not_acked = 0;
        }
        /* setup command is ACK'ed now by zlp */
        if (!dev->stall && dev->waiting_zlp_ack) {
                pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
                dev->waiting_zlp_ack = 0;
        }
}

/**
 * pch_udc_start_rxrequest() - This function starts the receive requirement.
 * @ep:         Reference to the endpoint structure
 * @req:        Reference to the request structure
 */
static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
                                         struct pch_udc_request *req)
{
        struct pch_udc_data_dma_desc *td_data;

        pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
        td_data = req->td_data;
        /* Set the status bits for all descriptors */
        while (1) {
                td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
                                    PCH_UDC_BS_HST_RDY;
                if ((td_data->status & PCH_UDC_DMA_LAST) ==  PCH_UDC_DMA_LAST)
                        break;
                td_data = phys_to_virt(td_data->next);
        }
        /* Write the descriptor pointer */
        pch_udc_ep_set_ddptr(ep, req->td_data_phys);
        req->dma_going = 1;
        pch_udc_enable_ep_interrupts(ep->dev, UDC_EPINT_OUT_EP0 << ep->num);
        pch_udc_set_dma(ep->dev, DMA_DIR_RX);
        pch_udc_ep_clear_nak(ep);
        pch_udc_ep_set_rrdy(ep);
}

/**
 * pch_udc_pcd_ep_enable() - This API enables the endpoint. It is called
 *                              from gadget driver
 * @usbep:      Reference to the USB endpoint structure
 * @desc:       Reference to the USB endpoint descriptor structure
 *
 * Return codes:
 *      0:              Success
 *      -EINVAL:
 *      -ESHUTDOWN:
 */
static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
                                    const struct usb_endpoint_descriptor *desc)
{
        struct pch_udc_ep       *ep;
        struct pch_udc_dev      *dev;
        unsigned long           iflags;

        if (!usbep || (usbep->name == ep0_string) || !desc ||
            (desc->bDescriptorType != USB_DT_ENDPOINT) || !desc->wMaxPacketSize)
                return -EINVAL;

        ep = container_of(usbep, struct pch_udc_ep, ep);
        dev = ep->dev;
        if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
                return -ESHUTDOWN;
        spin_lock_irqsave(&dev->lock, iflags);
        ep->ep.desc = desc;
        ep->halted = 0;
        pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
        ep->ep.maxpacket = usb_endpoint_maxp(desc);
        pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
        spin_unlock_irqrestore(&dev->lock, iflags);
        return 0;
}

/**
 * pch_udc_pcd_ep_disable() - This API disables endpoint and is called
 *                              from gadget driver
 * @usbep       Reference to the USB endpoint structure
 *
 * Return codes:
 *      0:              Success
 *      -EINVAL:
 */
static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
{
        struct pch_udc_ep       *ep;
        unsigned long   iflags;

        if (!usbep)
                return -EINVAL;

        ep = container_of(usbep, struct pch_udc_ep, ep);
        if ((usbep->name == ep0_string) || !ep->ep.desc)
                return -EINVAL;

        spin_lock_irqsave(&ep->dev->lock, iflags);
        empty_req_queue(ep);
        ep->halted = 1;
        pch_udc_ep_disable(ep);
        pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
        ep->ep.desc = NULL;
        INIT_LIST_HEAD(&ep->queue);
        spin_unlock_irqrestore(&ep->dev->lock, iflags);
        return 0;
}

/**
 * pch_udc_alloc_request() - This function allocates request structure.
 *                              It is called by gadget driver
 * @usbep:      Reference to the USB endpoint structure
 * @gfp:        Flag to be used while allocating memory
 *
 * Return codes:
 *      NULL:                   Failure
 *      Allocated address:      Success
 */
static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
                                                  gfp_t gfp)
{
        struct pch_udc_request          *req;
        struct pch_udc_ep               *ep;
        struct pch_udc_data_dma_desc    *dma_desc;

        if (!usbep)
                return NULL;
        ep = container_of(usbep, struct pch_udc_ep, ep);
        req = kzalloc(sizeof *req, gfp);
        if (!req)
                return NULL;
        req->req.dma = DMA_ADDR_INVALID;
        req->dma = DMA_ADDR_INVALID;
        INIT_LIST_HEAD(&req->queue);
        if (!ep->dev->dma_addr)
                return &req->req;
        /* ep0 in requests are allocated from data pool here */
        dma_desc = pci_pool_alloc(ep->dev->data_requests, gfp,
                                  &req->td_data_phys);
        if (NULL == dma_desc) {
                kfree(req);
                return NULL;
        }
        /* prevent from using desc. - set HOST BUSY */
        dma_desc->status |= PCH_UDC_BS_HST_BSY;
        dma_desc->dataptr = cpu_to_le32(DMA_ADDR_INVALID);
        req->td_data = dma_desc;
        req->td_data_last = dma_desc;
        req->chain_len = 1;
        return &req->req;
}

/**
 * pch_udc_free_request() - This function frees request structure.
 *                              It is called by gadget driver
 * @usbep:      Reference to the USB endpoint structure
 * @usbreq:     Reference to the USB request
 */
static void pch_udc_free_request(struct usb_ep *usbep,
                                  struct usb_request *usbreq)
{
        struct pch_udc_ep       *ep;
        struct pch_udc_request  *req;
        struct pch_udc_dev      *dev;

        if (!usbep || !usbreq)
                return;
        ep = container_of(usbep, struct pch_udc_ep, ep);
        req = container_of(usbreq, struct pch_udc_request, req);
        dev = ep->dev;
        if (!list_empty(&req->queue))
                dev_err(&dev->pdev->dev, "%s: %s req=0x%p queue not empty\n",
                        __func__, usbep->name, req);
        if (req->td_data != NULL) {
                if (req->chain_len > 1)
                        pch_udc_free_dma_chain(ep->dev, req);
                pci_pool_free(ep->dev->data_requests, req->td_data,
                              req->td_data_phys);
        }
        kfree(req);
}

/**
 * pch_udc_pcd_queue() - This function queues a request packet. It is called
 *                      by gadget driver
 * @usbep:      Reference to the USB endpoint structure
 * @usbreq:     Reference to the USB request
 * @gfp:        Flag to be used while mapping the data buffer
 *
 * Return codes:
 *      0:                      Success
 *      linux error number:     Failure
 */
static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
                                                                 gfp_t gfp)
{
        int retval = 0;
        struct pch_udc_ep       *ep;
        struct pch_udc_dev      *dev;
        struct pch_udc_request  *req;
        unsigned long   iflags;

        if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf)
                return -EINVAL;
        ep = container_of(usbep, struct pch_udc_ep, ep);
        dev = ep->dev;
        if (!ep->ep.desc && ep->num)
                return -EINVAL;
        req = container_of(usbreq, struct pch_udc_request, req);
        if (!list_empty(&req->queue))
                return -EINVAL;
        if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
                return -ESHUTDOWN;
        spin_lock_irqsave(&dev->lock, iflags);
        /* map the buffer for dma */
        if (usbreq->length &&
            ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
                if (!((unsigned long)(usbreq->buf) & 0x03)) {
                        if (ep->in)
                                usbreq->dma = dma_map_single(&dev->pdev->dev,
                                                             usbreq->buf,
                                                             usbreq->length,
                                                             DMA_TO_DEVICE);
                        else
                                usbreq->dma = dma_map_single(&dev->pdev->dev,
                                                             usbreq->buf,
                                                             usbreq->length,
                                                             DMA_FROM_DEVICE);
                } else {
                        req->buf = kzalloc(usbreq->length, GFP_ATOMIC);
                        if (!req->buf) {
                                retval = -ENOMEM;
                                goto probe_end;
                        }
                        if (ep->in) {
                                memcpy(req->buf, usbreq->buf, usbreq->length);
                                req->dma = dma_map_single(&dev->pdev->dev,
                                                          req->buf,
                                                          usbreq->length,
                                                          DMA_TO_DEVICE);
                        } else
                                req->dma = dma_map_single(&dev->pdev->dev,
                                                          req->buf,
                                                          usbreq->length,
                                                          DMA_FROM_DEVICE);
                }
                req->dma_mapped = 1;
        }
        if (usbreq->length > 0) {
                retval = prepare_dma(ep, req, GFP_ATOMIC);
                if (retval)
                        goto probe_end;
        }
        usbreq->actual = 0;
        usbreq->status = -EINPROGRESS;
        req->dma_done = 0;
        if (list_empty(&ep->queue) && !ep->halted) {
                /* no pending transfer, so start this req */
                if (!usbreq->length) {
                        process_zlp(ep, req);
                        retval = 0;
                        goto probe_end;
                }
                if (!ep->in) {
                        pch_udc_start_rxrequest(ep, req);
                } else {
                        /*
                        * For IN trfr the descriptors will be programmed and
                        * P bit will be set when
                        * we get an IN token
                        */
                        pch_udc_wait_ep_stall(ep);
                        pch_udc_ep_clear_nak(ep);
                        pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
                }
        }
        /* Now add this request to the ep's pending requests */
        if (req != NULL)
                list_add_tail(&req->queue, &ep->queue);

probe_end:
        spin_unlock_irqrestore(&dev->lock, iflags);
        return retval;
}

/**
 * pch_udc_pcd_dequeue() - This function de-queues a request packet.
 *                              It is called by gadget driver
 * @usbep:      Reference to the USB endpoint structure
 * @usbreq:     Reference to the USB request
 *
 * Return codes:
 *      0:                      Success
 *      linux error number:     Failure
 */
static int pch_udc_pcd_dequeue(struct usb_ep *usbep,
                                struct usb_request *usbreq)
{
        struct pch_udc_ep       *ep;
        struct pch_udc_request  *req;
        unsigned long           flags;
        int ret = -EINVAL;

        ep = container_of(usbep, struct pch_udc_ep, ep);
        if (!usbep || !usbreq || (!ep->ep.desc && ep->num))
                return ret;
        req = container_of(usbreq, struct pch_udc_request, req);
        spin_lock_irqsave(&ep->dev->lock, flags);
        /* make sure it's still queued on this endpoint */
        list_for_each_entry(req, &ep->queue, queue) {
                if (&req->req == usbreq) {
                        pch_udc_ep_set_nak(ep);
                        if (!list_empty(&req->queue))
                                complete_req(ep, req, -ECONNRESET);
                        ret = 0;
                        break;
                }
        }
        spin_unlock_irqrestore(&ep->dev->lock, flags);
        return ret;
}

/**
 * pch_udc_pcd_set_halt() - This function Sets or clear the endpoint halt
 *                          feature
 * @usbep:      Reference to the USB endpoint structure
 * @halt:       Specifies whether to set or clear the feature
 *
 * Return codes:
 *      0:                      Success
 *      linux error number:     Failure
 */
static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt)
{
        struct pch_udc_ep       *ep;
        unsigned long iflags;
        int ret;

        if (!usbep)
                return -EINVAL;
        ep = container_of(usbep, struct pch_udc_ep, ep);
        if (!ep->ep.desc && !ep->num)
                return -EINVAL;
        if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
                return -ESHUTDOWN;
        spin_lock_irqsave(&udc_stall_spinlock, iflags);
        if (list_empty(&ep->queue)) {
                if (halt) {
                        if (ep->num == PCH_UDC_EP0)
                                ep->dev->stall = 1;
                        pch_udc_ep_set_stall(ep);
                        pch_udc_enable_ep_interrupts(
                                ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
                } else {
                        pch_udc_ep_clear_stall(ep);
                }
                ret = 0;
        } else {
                ret = -EAGAIN;
        }
        spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
        return ret;
}

/**
 * pch_udc_pcd_set_wedge() - This function Sets or clear the endpoint
 *                              halt feature
 * @usbep:      Reference to the USB endpoint structure
 * @halt:       Specifies whether to set or clear the feature
 *
 * Return codes:
 *      0:                      Success
 *      linux error number:     Failure
 */
static int pch_udc_pcd_set_wedge(struct usb_ep *usbep)
{
        struct pch_udc_ep       *ep;
        unsigned long iflags;
        int ret;

        if (!usbep)
                return -EINVAL;
        ep = container_of(usbep, struct pch_udc_ep, ep);
        if (!ep->ep.desc && !ep->num)
                return -EINVAL;
        if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
                return -ESHUTDOWN;
        spin_lock_irqsave(&udc_stall_spinlock, iflags);
        if (!list_empty(&ep->queue)) {
                ret = -EAGAIN;
        } else {
                if (ep->num == PCH_UDC_EP0)
                        ep->dev->stall = 1;
                pch_udc_ep_set_stall(ep);
                pch_udc_enable_ep_interrupts(ep->dev,
                                             PCH_UDC_EPINT(ep->in, ep->num));
                ep->dev->prot_stall = 1;
                ret = 0;
        }
        spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
        return ret;
}

/**
 * pch_udc_pcd_fifo_flush() - This function Flush the FIFO of specified endpoint
 * @usbep:      Reference to the USB endpoint structure
 */
static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep)
{
        struct pch_udc_ep  *ep;

        if (!usbep)
                return;

        ep = container_of(usbep, struct pch_udc_ep, ep);
        if (ep->ep.desc || !ep->num)
                pch_udc_ep_fifo_flush(ep, ep->in);
}

static const struct usb_ep_ops pch_udc_ep_ops = {
        .enable         = pch_udc_pcd_ep_enable,
        .disable        = pch_udc_pcd_ep_disable,
        .alloc_request  = pch_udc_alloc_request,
        .free_request   = pch_udc_free_request,
        .queue          = pch_udc_pcd_queue,
        .dequeue        = pch_udc_pcd_dequeue,
        .set_halt       = pch_udc_pcd_set_halt,
        .set_wedge      = pch_udc_pcd_set_wedge,
        .fifo_status    = NULL,
        .fifo_flush     = pch_udc_pcd_fifo_flush,
};

/**
 * pch_udc_init_setup_buff() - This function initializes the SETUP buffer
 * @td_stp:     Reference to the SETP buffer structure
 */
static void pch_udc_init_setup_buff(struct pch_udc_stp_dma_desc *td_stp)
{
        static u32      pky_marker;

        if (!td_stp)
                return;
        td_stp->reserved = ++pky_marker;
        memset(&td_stp->request, 0xFF, sizeof td_stp->request);
        td_stp->status = PCH_UDC_BS_HST_RDY;
}

/**
 * pch_udc_start_next_txrequest() - This function starts
 *                                      the next transmission requirement
 * @ep: Reference to the endpoint structure
 */
static void pch_udc_start_next_txrequest(struct pch_udc_ep *ep)
{
        struct pch_udc_request *req;
        struct pch_udc_data_dma_desc *td_data;

        if (pch_udc_read_ep_control(ep) & UDC_EPCTL_P)
                return;

        if (list_empty(&ep->queue))
                return;

        /* next request */
        req = list_entry(ep->queue.next, struct pch_udc_request, queue);
        if (req->dma_going)
                return;
        if (!req->td_data)
                return;
        pch_udc_wait_ep_stall(ep);
        req->dma_going = 1;
        pch_udc_ep_set_ddptr(ep, 0);
        td_data = req->td_data;
        while (1) {
                td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
                                   PCH_UDC_BS_HST_RDY;
                if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST)
                        break;
                td_data = phys_to_virt(td_data->next);
        }
        pch_udc_ep_set_ddptr(ep, req->td_data_phys);
        pch_udc_set_dma(ep->dev, DMA_DIR_TX);
        pch_udc_ep_set_pd(ep);
        pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
        pch_udc_ep_clear_nak(ep);
}

/**
 * pch_udc_complete_transfer() - This function completes a transfer
 * @ep:         Reference to the endpoint structure
 */
static void pch_udc_complete_transfer(struct pch_udc_ep *ep)
{
        struct pch_udc_request *req;
        struct pch_udc_dev *dev = ep->dev;

        if (list_empty(&ep->queue))
                return;
        req = list_entry(ep->queue.next, struct pch_udc_request, queue);
        if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
            PCH_UDC_BS_DMA_DONE)
                return;
        if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
             PCH_UDC_RTS_SUCC) {
                dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
                        "epstatus=0x%08x\n",
                       (req->td_data_last->status & PCH_UDC_RXTX_STS),
                       (int)(ep->epsts));
                return;
        }

        req->req.actual = req->req.length;
        req->td_data_last->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
        req->td_data->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
        complete_req(ep, req, 0);
        req->dma_going = 0;
        if (!list_empty(&ep->queue)) {
                pch_udc_wait_ep_stall(ep);
                pch_udc_ep_clear_nak(ep);
                pch_udc_enable_ep_interrupts(ep->dev,
                                             PCH_UDC_EPINT(ep->in, ep->num));
        } else {
                pch_udc_disable_ep_interrupts(ep->dev,
                                              PCH_UDC_EPINT(ep->in, ep->num));
        }
}

/**
 * pch_udc_complete_receiver() - This function completes a receiver
 * @ep:         Reference to the endpoint structure
 */
static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
{
        struct pch_udc_request *req;
        struct pch_udc_dev *dev = ep->dev;
        unsigned int count;
        struct pch_udc_data_dma_desc *td;
        dma_addr_t addr;

        if (list_empty(&ep->queue))
                return;
        /* next request */
        req = list_entry(ep->queue.next, struct pch_udc_request, queue);
        pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
        pch_udc_ep_set_ddptr(ep, 0);
        if ((req->td_data_last->status & PCH_UDC_BUFF_STS) ==
            PCH_UDC_BS_DMA_DONE)
                td = req->td_data_last;
        else
                td = req->td_data;

        while (1) {
                if ((td->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) {
                        dev_err(&dev->pdev->dev, "Invalid RXTX status=0x%08x "
                                "epstatus=0x%08x\n",
                                (req->td_data->status & PCH_UDC_RXTX_STS),
                                (int)(ep->epsts));
                        return;
                }
                if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE)
                        if (td->status & PCH_UDC_DMA_LAST) {
                                count = td->status & PCH_UDC_RXTX_BYTES;
                                break;
                        }
                if (td == req->td_data_last) {
                        dev_err(&dev->pdev->dev, "Not complete RX descriptor");
                        return;
                }
                addr = (dma_addr_t)td->next;
                td = phys_to_virt(addr);
        }
        /* on 64k packets the RXBYTES field is zero */
        if (!count && (req->req.length == UDC_DMA_MAXPACKET))
                count = UDC_DMA_MAXPACKET;
        req->td_data->status |= PCH_UDC_DMA_LAST;
        td->status |= PCH_UDC_BS_HST_BSY;

        req->dma_going = 0;
        req->req.actual = count;
        complete_req(ep, req, 0);
        /* If there is a new/failed requests try that now */
        if (!list_empty(&ep->queue)) {
                req = list_entry(ep->queue.next, struct pch_udc_request, queue);
                pch_udc_start_rxrequest(ep, req);
        }
}

/**
 * pch_udc_svc_data_in() - This function process endpoint interrupts
 *                              for IN endpoints
 * @dev:        Reference to the device structure
 * @ep_num:     Endpoint that generated the interrupt
 */
static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
{
        u32     epsts;
        struct pch_udc_ep       *ep;

        ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
        epsts = ep->epsts;
        ep->epsts = 0;

        if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA  | UDC_EPSTS_HE |
                       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
                       UDC_EPSTS_RSS | UDC_EPSTS_XFERDONE)))
                return;
        if ((epsts & UDC_EPSTS_BNA))
                return;
        if (epsts & UDC_EPSTS_HE)
                return;
        if (epsts & UDC_EPSTS_RSS) {
                pch_udc_ep_set_stall(ep);
                pch_udc_enable_ep_interrupts(ep->dev,
                                             PCH_UDC_EPINT(ep->in, ep->num));
        }
        if (epsts & UDC_EPSTS_RCS) {
                if (!dev->prot_stall) {
                        pch_udc_ep_clear_stall(ep);
                } else {
                        pch_udc_ep_set_stall(ep);
                        pch_udc_enable_ep_interrupts(ep->dev,
                                                PCH_UDC_EPINT(ep->in, ep->num));
                }
        }
        if (epsts & UDC_EPSTS_TDC)
                pch_udc_complete_transfer(ep);
        /* On IN interrupt, provide data if we have any */
        if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_RSS) &&
            !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY))
                pch_udc_start_next_txrequest(ep);
}

/**
 * pch_udc_svc_data_out() - Handles interrupts from OUT endpoint
 * @dev:        Reference to the device structure
 * @ep_num:     Endpoint that generated the interrupt
 */
static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
{
        u32                     epsts;
        struct pch_udc_ep               *ep;
        struct pch_udc_request          *req = NULL;

        ep = &dev->ep[UDC_EPOUT_IDX(ep_num)];
        epsts = ep->epsts;
        ep->epsts = 0;

        if ((epsts & UDC_EPSTS_BNA) && (!list_empty(&ep->queue))) {
                /* next request */
                req = list_entry(ep->queue.next, struct pch_udc_request,
                                 queue);
                if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
                     PCH_UDC_BS_DMA_DONE) {
                        if (!req->dma_going)
                                pch_udc_start_rxrequest(ep, req);
                        return;
                }
        }
        if (epsts & UDC_EPSTS_HE)
                return;
        if (epsts & UDC_EPSTS_RSS) {
                pch_udc_ep_set_stall(ep);
                pch_udc_enable_ep_interrupts(ep->dev,
                                             PCH_UDC_EPINT(ep->in, ep->num));
        }
        if (epsts & UDC_EPSTS_RCS) {
                if (!dev->prot_stall) {
                        pch_udc_ep_clear_stall(ep);
                } else {
                        pch_udc_ep_set_stall(ep);
                        pch_udc_enable_ep_interrupts(ep->dev,
                                                PCH_UDC_EPINT(ep->in, ep->num));
                }
        }
        if (((epsts & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
            UDC_EPSTS_OUT_DATA) {
                if (ep->dev->prot_stall == 1) {
                        pch_udc_ep_set_stall(ep);
                        pch_udc_enable_ep_interrupts(ep->dev,
                                                PCH_UDC_EPINT(ep->in, ep->num));
                } else {
                        pch_udc_complete_receiver(ep);
                }
        }
        if (list_empty(&ep->queue))
                pch_udc_set_dma(dev, DMA_DIR_RX);
}

/**
 * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
 * @dev:        Reference to the device structure
 */
static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
{
        u32     epsts;
        struct pch_udc_ep       *ep;
        struct pch_udc_ep       *ep_out;

        ep = &dev->ep[UDC_EP0IN_IDX];
        ep_out = &dev->ep[UDC_EP0OUT_IDX];
        epsts = ep->epsts;
        ep->epsts = 0;

        if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE |
                       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
                       UDC_EPSTS_XFERDONE)))
                return;
        if ((epsts & UDC_EPSTS_BNA))
                return;
        if (epsts & UDC_EPSTS_HE)
                return;
        if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) {
                pch_udc_complete_transfer(ep);
                pch_udc_clear_dma(dev, DMA_DIR_RX);
                ep_out->td_data->status = (ep_out->td_data->status &
                                        ~PCH_UDC_BUFF_STS) |
                                        PCH_UDC_BS_HST_RDY;
                pch_udc_ep_clear_nak(ep_out);
                pch_udc_set_dma(dev, DMA_DIR_RX);
                pch_udc_ep_set_rrdy(ep_out);
        }
        /* On IN interrupt, provide data if we have any */
        if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
             !(epsts & UDC_EPSTS_TXEMPTY))
                pch_udc_start_next_txrequest(ep);
}

/**
 * pch_udc_svc_control_out() - Routine that handle Control
 *                                      OUT endpoint interrupts
 * @dev:        Reference to the device structure
 */
static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
        __releases(&dev->lock)
        __acquires(&dev->lock)
{
        u32     stat;
        int setup_supported;
        struct pch_udc_ep       *ep;

        ep = &dev->ep[UDC_EP0OUT_IDX];
        stat = ep->epsts;
        ep->epsts = 0;

        /* If setup data */
        if (((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
            UDC_EPSTS_OUT_SETUP) {
                dev->stall = 0;
                dev->ep[UDC_EP0IN_IDX].halted = 0;
                dev->ep[UDC_EP0OUT_IDX].halted = 0;
                dev->setup_data = ep->td_stp->request;
                pch_udc_init_setup_buff(ep->td_stp);
                pch_udc_clear_dma(dev, DMA_DIR_RX);
                pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
                                      dev->ep[UDC_EP0IN_IDX].in);
                if ((dev->setup_data.bRequestType & USB_DIR_IN))
                        dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
                else /* OUT */
                        dev->gadget.ep0 = &ep->ep;
                spin_lock(&dev->lock);
                /* If Mass storage Reset */
                if ((dev->setup_data.bRequestType == 0x21) &&
                    (dev->setup_data.bRequest == 0xFF))
                        dev->prot_stall = 0;
                /* call gadget with setup data received */
                setup_supported = dev->driver->setup(&dev->gadget,
                                                     &dev->setup_data);
                spin_unlock(&dev->lock);

                if (dev->setup_data.bRequestType & USB_DIR_IN) {
                        ep->td_data->status = (ep->td_data->status &
                                                ~PCH_UDC_BUFF_STS) |
                                                PCH_UDC_BS_HST_RDY;
                        pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
                }
                /* ep0 in returns data on IN phase */
                if (setup_supported >= 0 && setup_supported <
                                            UDC_EP0IN_MAX_PKT_SIZE) {
                        pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
                        /* Gadget would have queued a request when
                         * we called the setup */
                        if (!(dev->setup_data.bRequestType & USB_DIR_IN)) {
                                pch_udc_set_dma(dev, DMA_DIR_RX);
                                pch_udc_ep_clear_nak(ep);
                        }
                } else if (setup_supported < 0) {
                        /* if unsupported request, then stall */
                        pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
                        pch_udc_enable_ep_interrupts(ep->dev,
                                                PCH_UDC_EPINT(ep->in, ep->num));
                        dev->stall = 0;
                        pch_udc_set_dma(dev, DMA_DIR_RX);
                } else {
                        dev->waiting_zlp_ack = 1;
                }
        } else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
                     UDC_EPSTS_OUT_DATA) && !dev->stall) {
                pch_udc_clear_dma(dev, DMA_DIR_RX);
                pch_udc_ep_set_ddptr(ep, 0);
                if (!list_empty(&ep->queue)) {
                        ep->epsts = stat;
                        pch_udc_svc_data_out(dev, PCH_UDC_EP0);
                }
                pch_udc_set_dma(dev, DMA_DIR_RX);
        }
        pch_udc_ep_set_rrdy(ep);
}


/**
 * pch_udc_postsvc_epinters() - This function enables end point interrupts
 *                              and clears NAK status
 * @dev:        Reference to the device structure
 * @ep_num:     End point number
 */
static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
{
        struct pch_udc_ep       *ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
        if (list_empty(&ep->queue))
                return;
        pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
        pch_udc_ep_clear_nak(ep);
}

/**
 * pch_udc_read_all_epstatus() - This function read all endpoint status
 * @dev:        Reference to the device structure
 * @ep_intr:    Status of endpoint interrupt
 */
static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
{
        int i;
        struct pch_udc_ep       *ep;

        for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
                /* IN */
                if (ep_intr & (0x1 << i)) {
                        ep = &dev->ep[UDC_EPIN_IDX(i)];
                        ep->epsts = pch_udc_read_ep_status(ep);
                        pch_udc_clear_ep_status(ep, ep->epsts);
                }
                /* OUT */
                if (ep_intr & (0x10000 << i)) {
                        ep = &dev->ep[UDC_EPOUT_IDX(i)];
                        ep->epsts = pch_udc_read_ep_status(ep);
                        pch_udc_clear_ep_status(ep, ep->epsts);
                }
        }
}

/**
 * pch_udc_activate_control_ep() - This function enables the control endpoints
 *                                      for traffic after a reset
 * @dev:        Reference to the device structure
 */
static void pch_udc_activate_control_ep(struct pch_udc_dev *dev)
{
        struct pch_udc_ep       *ep;
        u32 val;

        /* Setup the IN endpoint */
        ep = &dev->ep[UDC_EP0IN_IDX];
        pch_udc_clear_ep_control(ep);
        pch_udc_ep_fifo_flush(ep, ep->in);
        pch_udc_ep_set_bufsz(ep, UDC_EP0IN_BUFF_SIZE, ep->in);
        pch_udc_ep_set_maxpkt(ep, UDC_EP0IN_MAX_PKT_SIZE);
        /* Initialize the IN EP Descriptor */
        ep->td_data      = NULL;
        ep->td_stp       = NULL;
        ep->td_data_phys = 0;
        ep->td_stp_phys  = 0;

        /* Setup the OUT endpoint */
        ep = &dev->ep[UDC_EP0OUT_IDX];
        pch_udc_clear_ep_control(ep);
        pch_udc_ep_fifo_flush(ep, ep->in);
        pch_udc_ep_set_bufsz(ep, UDC_EP0OUT_BUFF_SIZE, ep->in);
        pch_udc_ep_set_maxpkt(ep, UDC_EP0OUT_MAX_PKT_SIZE);
        val = UDC_EP0OUT_MAX_PKT_SIZE << UDC_CSR_NE_MAX_PKT_SHIFT;
        pch_udc_write_csr(ep->dev, val, UDC_EP0OUT_IDX);

        /* Initialize the SETUP buffer */
        pch_udc_init_setup_buff(ep->td_stp);
        /* Write the pointer address of dma descriptor */
        pch_udc_ep_set_subptr(ep, ep->td_stp_phys);
        /* Write the pointer address of Setup descriptor */
        pch_udc_ep_set_ddptr(ep, ep->td_data_phys);

        /* Initialize the dma descriptor */
        ep->td_data->status  = PCH_UDC_DMA_LAST;
        ep->td_data->dataptr = dev->dma_addr;
        ep->td_data->next    = ep->td_data_phys;

        pch_udc_ep_clear_nak(ep);
}


/**
 * pch_udc_svc_ur_interrupt() - This function handles a USB reset interrupt
 * @dev:        Reference to driver structure
 */
static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
{
        struct pch_udc_ep       *ep;
        int i;

        pch_udc_clear_dma(dev, DMA_DIR_TX);
        pch_udc_clear_dma(dev, DMA_DIR_RX);
        /* Mask all endpoint interrupts */
        pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
        /* clear all endpoint interrupts */
        pch_udc_write_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);

        for (i = 0; i < PCH_UDC_EP_NUM; i++) {
                ep = &dev->ep[i];
                pch_udc_clear_ep_status(ep, UDC_EPSTS_ALL_CLR_MASK);
                pch_udc_clear_ep_control(ep);
                pch_udc_ep_set_ddptr(ep, 0);
                pch_udc_write_csr(ep->dev, 0x00, i);
        }
        dev->stall = 0;
        dev->prot_stall = 0;
        dev->waiting_zlp_ack = 0;
        dev->set_cfg_not_acked = 0;

        /* disable ep to empty req queue. Skip the control EP's */
        for (i = 0; i < (PCH_UDC_USED_EP_NUM*2); i++) {
                ep = &dev->ep[i];
                pch_udc_ep_set_nak(ep);
                pch_udc_ep_fifo_flush(ep, ep->in);
                /* Complete request queue */
                empty_req_queue(ep);
        }
        if (dev->driver) {
                spin_unlock(&dev->lock);
                usb_gadget_udc_reset(&dev->gadget, dev->driver);
                spin_lock(&dev->lock);
        }
}

/**
 * pch_udc_svc_enum_interrupt() - This function handles a USB speed enumeration
 *                              done interrupt
 * @dev:        Reference to driver structure
 */
static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
{
        u32 dev_stat, dev_speed;
        u32 speed = USB_SPEED_FULL;

        dev_stat = pch_udc_read_device_status(dev);
        dev_speed = (dev_stat & UDC_DEVSTS_ENUM_SPEED_MASK) >>
                                                 UDC_DEVSTS_ENUM_SPEED_SHIFT;
        switch (dev_speed) {
        case UDC_DEVSTS_ENUM_SPEED_HIGH:
                speed = USB_SPEED_HIGH;
                break;
        case  UDC_DEVSTS_ENUM_SPEED_FULL:
                speed = USB_SPEED_FULL;
                break;
        case  UDC_DEVSTS_ENUM_SPEED_LOW:
                speed = USB_SPEED_LOW;
                break;
        default:
                BUG();
        }
        dev->gadget.speed = speed;
        pch_udc_activate_control_ep(dev);
        pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 | UDC_EPINT_OUT_EP0);
        pch_udc_set_dma(dev, DMA_DIR_TX);
        pch_udc_set_dma(dev, DMA_DIR_RX);
        pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));

        /* enable device interrupts */
        pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
                                        UDC_DEVINT_ES | UDC_DEVINT_ENUM |
                                        UDC_DEVINT_SI | UDC_DEVINT_SC);
}

/**
 * pch_udc_svc_intf_interrupt() - This function handles a set interface
 *                                interrupt
 * @dev:        Reference to driver structure
 */
static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
{
        u32 reg, dev_stat = 0;
        int i;

        dev_stat = pch_udc_read_device_status(dev);
        dev->cfg_data.cur_intf = (dev_stat & UDC_DEVSTS_INTF_MASK) >>
                                                         UDC_DEVSTS_INTF_SHIFT;
        dev->cfg_data.cur_alt = (dev_stat & UDC_DEVSTS_ALT_MASK) >>
                                                         UDC_DEVSTS_ALT_SHIFT;
        dev->set_cfg_not_acked = 1;
        /* Construct the usb request for gadget driver and inform it */
        memset(&dev->setup_data, 0 , sizeof dev->setup_data);
        dev->setup_data.bRequest = USB_REQ_SET_INTERFACE;
        dev->setup_data.bRequestType = USB_RECIP_INTERFACE;
        dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_alt);
        dev->setup_data.wIndex = cpu_to_le16(dev->cfg_data.cur_intf);
        /* programm the Endpoint Cfg registers */
        /* Only one end point cfg register */
        reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
        reg = (reg & ~UDC_CSR_NE_INTF_MASK) |
              (dev->cfg_data.cur_intf << UDC_CSR_NE_INTF_SHIFT);
        reg = (reg & ~UDC_CSR_NE_ALT_MASK) |
              (dev->cfg_data.cur_alt << UDC_CSR_NE_ALT_SHIFT);
        pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
        for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
                /* clear stall bits */
                pch_udc_ep_clear_stall(&(dev->ep[i]));
                dev->ep[i].halted = 0;
        }
        dev->stall = 0;
        spin_unlock(&dev->lock);
        dev->driver->setup(&dev->gadget, &dev->setup_data);
        spin_lock(&dev->lock);
}

/**
 * pch_udc_svc_cfg_interrupt() - This function handles a set configuration
 *                              interrupt
 * @dev:        Reference to driver structure
 */
static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
{
        int i;
        u32 reg, dev_stat = 0;

        dev_stat = pch_udc_read_device_status(dev);
        dev->set_cfg_not_acked = 1;
        dev->cfg_data.cur_cfg = (dev_stat & UDC_DEVSTS_CFG_MASK) >>
                                UDC_DEVSTS_CFG_SHIFT;
        /* make usb request for gadget driver */
        memset(&dev->setup_data, 0 , sizeof dev->setup_data);
        dev->setup_data.bRequest = USB_REQ_SET_CONFIGURATION;
        dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_cfg);
        /* program the NE registers */
        /* Only one end point cfg register */
        reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
        reg = (reg & ~UDC_CSR_NE_CFG_MASK) |
              (dev->cfg_data.cur_cfg << UDC_CSR_NE_CFG_SHIFT);
        pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
        for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
                /* clear stall bits */
                pch_udc_ep_clear_stall(&(dev->ep[i]));
                dev->ep[i].halted = 0;
        }
        dev->stall = 0;

        /* call gadget zero with setup data received */
        spin_unlock(&dev->lock);
        dev->driver->setup(&dev->gadget, &dev->setup_data);
        spin_lock(&dev->lock);
}

/**
 * pch_udc_dev_isr() - This function services device interrupts
 *                      by invoking appropriate routines.
 * @dev:        Reference to the device structure
 * @dev_intr:   The Device interrupt status.
 */
static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
{
        int vbus;

        /* USB Reset Interrupt */
        if (dev_intr & UDC_DEVINT_UR) {
                pch_udc_svc_ur_interrupt(dev);
                dev_dbg(&dev->pdev->dev, "USB_RESET\n");
        }
        /* Enumeration Done Interrupt */
        if (dev_intr & UDC_DEVINT_ENUM) {
                pch_udc_svc_enum_interrupt(dev);
                dev_dbg(&dev->pdev->dev, "USB_ENUM\n");
        }
        /* Set Interface Interrupt */
        if (dev_intr & UDC_DEVINT_SI)
                pch_udc_svc_intf_interrupt(dev);
        /* Set Config Interrupt */
        if (dev_intr & UDC_DEVINT_SC)
                pch_udc_svc_cfg_interrupt(dev);
        /* USB Suspend interrupt */
        if (dev_intr & UDC_DEVINT_US) {
                if (dev->driver
                        && dev->driver->suspend) {
                        spin_unlock(&dev->lock);
                        dev->driver->suspend(&dev->gadget);
                        spin_lock(&dev->lock);
                }

                vbus = pch_vbus_gpio_get_value(dev);
                if ((dev->vbus_session == 0)
                        && (vbus != 1)) {
                        if (dev->driver && dev->driver->disconnect) {
                                spin_unlock(&dev->lock);
                                dev->driver->disconnect(&dev->gadget);
                                spin_lock(&dev->lock);
                        }
                        pch_udc_reconnect(dev);
                } else if ((dev->vbus_session == 0)
                        && (vbus == 1)
                        && !dev->vbus_gpio.intr)
                        schedule_work(&dev->vbus_gpio.irq_work_fall);

                dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
        }
        /* Clear the SOF interrupt, if enabled */
        if (dev_intr & UDC_DEVINT_SOF)
                dev_dbg(&dev->pdev->dev, "SOF\n");
        /* ES interrupt, IDLE > 3ms on the USB */
        if (dev_intr & UDC_DEVINT_ES)
                dev_dbg(&dev->pdev->dev, "ES\n");
        /* RWKP interrupt */
        if (dev_intr & UDC_DEVINT_RWKP)
                dev_dbg(&dev->pdev->dev, "RWKP\n");
}

/**
 * pch_udc_isr() - This function handles interrupts from the PCH USB Device
 * @irq:        Interrupt request number
 * @dev:        Reference to the device structure
 */
static irqreturn_t pch_udc_isr(int irq, void *pdev)
{
        struct pch_udc_dev *dev = (struct pch_udc_dev *) pdev;
        u32 dev_intr, ep_intr;
        int i;

        dev_intr = pch_udc_read_device_interrupts(dev);
        ep_intr = pch_udc_read_ep_interrupts(dev);

        /* For a hot plug, this find that the controller is hung up. */
        if (dev_intr == ep_intr)
                if (dev_intr == pch_udc_readl(dev, UDC_DEVCFG_ADDR)) {
                        dev_dbg(&dev->pdev->dev, "UDC: Hung up\n");
                        /* The controller is reset */
                        pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
                        return IRQ_HANDLED;
                }
        if (dev_intr)
                /* Clear device interrupts */
                pch_udc_write_device_interrupts(dev, dev_intr);
        if (ep_intr)
                /* Clear ep interrupts */
                pch_udc_write_ep_interrupts(dev, ep_intr);
        if (!dev_intr && !ep_intr)
                return IRQ_NONE;
        spin_lock(&dev->lock);
        if (dev_intr)
                pch_udc_dev_isr(dev, dev_intr);
        if (ep_intr) {
                pch_udc_read_all_epstatus(dev, ep_intr);
                /* Process Control In interrupts, if present */
                if (ep_intr & UDC_EPINT_IN_EP0) {
                        pch_udc_svc_control_in(dev);
                        pch_udc_postsvc_epinters(dev, 0);
                }
                /* Process Control Out interrupts, if present */
                if (ep_intr & UDC_EPINT_OUT_EP0)
                        pch_udc_svc_control_out(dev);
                /* Process data in end point interrupts */
                for (i = 1; i < PCH_UDC_USED_EP_NUM; i++) {
                        if (ep_intr & (1 <<  i)) {
                                pch_udc_svc_data_in(dev, i);
                                pch_udc_postsvc_epinters(dev, i);
                        }
                }
                /* Process data out end point interrupts */
                for (i = UDC_EPINT_OUT_SHIFT + 1; i < (UDC_EPINT_OUT_SHIFT +
                                                 PCH_UDC_USED_EP_NUM); i++)
                        if (ep_intr & (1 <<  i))
                                pch_udc_svc_data_out(dev, i -
                                                         UDC_EPINT_OUT_SHIFT);
        }
        spin_unlock(&dev->lock);
        return IRQ_HANDLED;
}

/**
 * pch_udc_setup_ep0() - This function enables control endpoint for traffic
 * @dev:        Reference to the device structure
 */
static void pch_udc_setup_ep0(struct pch_udc_dev *dev)
{
        /* enable ep0 interrupts */
        pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 |
                                                UDC_EPINT_OUT_EP0);
        /* enable device interrupts */
        pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
                                       UDC_DEVINT_ES | UDC_DEVINT_ENUM |
                                       UDC_DEVINT_SI | UDC_DEVINT_SC);
}

/**
 * pch_udc_pcd_reinit() - This API initializes the endpoint structures
 * @dev:        Reference to the driver structure
 */
static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
{
        const char *const ep_string[] = {
                ep0_string, "ep0out", "ep1in", "ep1out", "ep2in", "ep2out",
                "ep3in", "ep3out", "ep4in", "ep4out", "ep5in", "ep5out",
                "ep6in", "ep6out", "ep7in", "ep7out", "ep8in", "ep8out",
                "ep9in", "ep9out", "ep10in", "ep10out", "ep11in", "ep11out",
                "ep12in", "ep12out", "ep13in", "ep13out", "ep14in", "ep14out",
                "ep15in", "ep15out",
        };
        int i;

        dev->gadget.speed = USB_SPEED_UNKNOWN;
        INIT_LIST_HEAD(&dev->gadget.ep_list);

        /* Initialize the endpoints structures */
        memset(dev->ep, 0, sizeof dev->ep);
        for (i = 0; i < PCH_UDC_EP_NUM; i++) {
                struct pch_udc_ep *ep = &dev->ep[i];
                ep->dev = dev;
                ep->halted = 1;
                ep->num = i / 2;
                ep->in = ~i & 1;
                ep->ep.name = ep_string[i];
                ep->ep.ops = &pch_udc_ep_ops;
                if (ep->in) {
                        ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
                        ep->ep.caps.dir_in = true;
                } else {
                        ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
                                          UDC_EP_REG_SHIFT;
                        ep->ep.caps.dir_out = true;
                }
                if (i == UDC_EP0IN_IDX || i == UDC_EP0OUT_IDX) {
                        ep->ep.caps.type_control = true;
                } else {
                        ep->ep.caps.type_iso = true;
                        ep->ep.caps.type_bulk = true;
                        ep->ep.caps.type_int = true;
                }
                /* need to set ep->ep.maxpacket and set Default Configuration?*/
                usb_ep_set_maxpacket_limit(&ep->ep, UDC_BULK_MAX_PKT_SIZE);
                list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
                INIT_LIST_HEAD(&ep->queue);
        }
        usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IDX].ep, UDC_EP0IN_MAX_PKT_SIZE);
        usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IDX].ep, UDC_EP0OUT_MAX_PKT_SIZE);

        /* remove ep0 in and out from the list.  They have own pointer */
        list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
        list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);

        dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
        INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
}

/**
 * pch_udc_pcd_init() - This API initializes the driver structure
 * @dev:        Reference to the driver structure
 *
 * Return codes:
 *      0: Success
 */
static int pch_udc_pcd_init(struct pch_udc_dev *dev)
{
        pch_udc_init(dev);
        pch_udc_pcd_reinit(dev);
        pch_vbus_gpio_init(dev, vbus_gpio_port);
        return 0;
}

/**
 * init_dma_pools() - create dma pools during initialization
 * @pdev:       reference to struct pci_dev
 */
static int init_dma_pools(struct pch_udc_dev *dev)
{
        struct pch_udc_stp_dma_desc     *td_stp;
        struct pch_udc_data_dma_desc    *td_data;
        void                            *ep0out_buf;

        /* DMA setup */
        dev->data_requests = pci_pool_create("data_requests", dev->pdev,
                sizeof(struct pch_udc_data_dma_desc), 0, 0);
        if (!dev->data_requests) {
                dev_err(&dev->pdev->dev, "%s: can't get request data pool\n",
                        __func__);
                return -ENOMEM;
        }

        /* dma desc for setup data */
        dev->stp_requests = pci_pool_create("setup requests", dev->pdev,
                sizeof(struct pch_udc_stp_dma_desc), 0, 0);
        if (!dev->stp_requests) {
                dev_err(&dev->pdev->dev, "%s: can't get setup request pool\n",
                        __func__);
                return -ENOMEM;
        }
        /* setup */
        td_stp = pci_pool_alloc(dev->stp_requests, GFP_KERNEL,
                                &dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
        if (!td_stp) {
                dev_err(&dev->pdev->dev,
                        "%s: can't allocate setup dma descriptor\n", __func__);
                return -ENOMEM;
        }
        dev->ep[UDC_EP0OUT_IDX].td_stp = td_stp;

        /* data: 0 packets !? */
        td_data = pci_pool_alloc(dev->data_requests, GFP_KERNEL,
                                &dev->ep[UDC_EP0OUT_IDX].td_data_phys);
        if (!td_data) {
                dev_err(&dev->pdev->dev,
                        "%s: can't allocate data dma descriptor\n", __func__);
                return -ENOMEM;
        }
        dev->ep[UDC_EP0OUT_IDX].td_data = td_data;
        dev->ep[UDC_EP0IN_IDX].td_stp = NULL;
        dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
        dev->ep[UDC_EP0IN_IDX].td_data = NULL;
        dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;

        ep0out_buf = devm_kzalloc(&dev->pdev->dev, UDC_EP0OUT_BUFF_SIZE * 4,
                                  GFP_KERNEL);
        if (!ep0out_buf)
                return -ENOMEM;
        dev->dma_addr = dma_map_single(&dev->pdev->dev, ep0out_buf,
                                       UDC_EP0OUT_BUFF_SIZE * 4,
                                       DMA_FROM_DEVICE);
        return 0;
}

static int pch_udc_start(struct usb_gadget *g,
                struct usb_gadget_driver *driver)
{
        struct pch_udc_dev      *dev = to_pch_udc(g);

        driver->driver.bus = NULL;
        dev->driver = driver;

        /* get ready for ep0 traffic */
        pch_udc_setup_ep0(dev);

        /* clear SD */
        if ((pch_vbus_gpio_get_value(dev) != 0) || !dev->vbus_gpio.intr)
                pch_udc_clear_disconnect(dev);

        dev->connected = 1;
        return 0;
}

static int pch_udc_stop(struct usb_gadget *g)
{
        struct pch_udc_dev      *dev = to_pch_udc(g);

        pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);

        /* Assures that there are no pending requests with this driver */
        dev->driver = NULL;
        dev->connected = 0;

        /* set SD */
        pch_udc_set_disconnect(dev);

        return 0;
}

static void pch_udc_shutdown(struct pci_dev *pdev)
{
        struct pch_udc_dev *dev = pci_get_drvdata(pdev);

        pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
        pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);

        /* disable the pullup so the host will think we're gone */
        pch_udc_set_disconnect(dev);
}

static void pch_udc_remove(struct pci_dev *pdev)
{
        struct pch_udc_dev      *dev = pci_get_drvdata(pdev);

        usb_del_gadget_udc(&dev->gadget);

        /* gadget driver must not be registered */
        if (dev->driver)
                dev_err(&pdev->dev,
                        "%s: gadget driver still bound!!!\n", __func__);
        /* dma pool cleanup */
        if (dev->data_requests)
                pci_pool_destroy(dev->data_requests);

        if (dev->stp_requests) {
                /* cleanup DMA desc's for ep0in */
                if (dev->ep[UDC_EP0OUT_IDX].td_stp) {
                        pci_pool_free(dev->stp_requests,
                                dev->ep[UDC_EP0OUT_IDX].td_stp,
                                dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
                }
                if (dev->ep[UDC_EP0OUT_IDX].td_data) {
                        pci_pool_free(dev->stp_requests,
                                dev->ep[UDC_EP0OUT_IDX].td_data,
                                dev->ep[UDC_EP0OUT_IDX].td_data_phys);
                }
                pci_pool_destroy(dev->stp_requests);
        }

        if (dev->dma_addr)
                dma_unmap_single(&dev->pdev->dev, dev->dma_addr,
                                 UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE);

        pch_vbus_gpio_free(dev);

        pch_udc_exit(dev);
}

#ifdef CONFIG_PM_SLEEP
static int pch_udc_suspend(struct device *d)
{
        struct pci_dev *pdev = to_pci_dev(d);
        struct pch_udc_dev *dev = pci_get_drvdata(pdev);

        pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
        pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);

        return 0;
}

static int pch_udc_resume(struct device *d)
{
        return 0;
}

static SIMPLE_DEV_PM_OPS(pch_udc_pm, pch_udc_suspend, pch_udc_resume);
#define PCH_UDC_PM_OPS          (&pch_udc_pm)
#else
#define PCH_UDC_PM_OPS          NULL
#endif /* CONFIG_PM_SLEEP */

static int pch_udc_probe(struct pci_dev *pdev,
                          const struct pci_device_id *id)
{
        int                     bar;
        int                     retval;
        struct pch_udc_dev      *dev;

        /* init */
        dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
        if (!dev)
                return -ENOMEM;

        /* pci setup */
        retval = pcim_enable_device(pdev);
        if (retval)
                return retval;

        pci_set_drvdata(pdev, dev);

        /* Determine BAR based on PCI ID */
        if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC)
                bar = PCH_UDC_PCI_BAR_QUARK_X1000;
        else
                bar = PCH_UDC_PCI_BAR;

        /* PCI resource allocation */
        retval = pcim_iomap_regions(pdev, 1 << bar, pci_name(pdev));
        if (retval)
                return retval;

        dev->base_addr = pcim_iomap_table(pdev)[bar];

        /* initialize the hardware */
        if (pch_udc_pcd_init(dev))
                return -ENODEV;

        pci_enable_msi(pdev);

        retval = devm_request_irq(&pdev->dev, pdev->irq, pch_udc_isr,
                                  IRQF_SHARED, KBUILD_MODNAME, dev);
        if (retval) {
                dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
                        pdev->irq);
                goto finished;
        }

        pci_set_master(pdev);
        pci_try_set_mwi(pdev);

        /* device struct setup */
        spin_lock_init(&dev->lock);
        dev->pdev = pdev;
        dev->gadget.ops = &pch_udc_ops;

        retval = init_dma_pools(dev);
        if (retval)
                goto finished;

        dev->gadget.name = KBUILD_MODNAME;
        dev->gadget.max_speed = USB_SPEED_HIGH;

        /* Put the device in disconnected state till a driver is bound */
        pch_udc_set_disconnect(dev);
        retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
        if (retval)
                goto finished;
        return 0;

finished:
        pch_udc_remove(pdev);
        return retval;
}

static const struct pci_device_id pch_udc_pcidev_id[] = {
        {
                PCI_DEVICE(PCI_VENDOR_ID_INTEL,
                           PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
                .class = PCI_CLASS_SERIAL_USB_DEVICE,
                .class_mask = 0xffffffff,
        },
        {
                PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
                .class = PCI_CLASS_SERIAL_USB_DEVICE,
                .class_mask = 0xffffffff,
        },
        {
                PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC),
                .class = PCI_CLASS_SERIAL_USB_DEVICE,
                .class_mask = 0xffffffff,
        },
        {
                PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
                .class = PCI_CLASS_SERIAL_USB_DEVICE,
                .class_mask = 0xffffffff,
        },
        { 0 },
};

MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id);

static struct pci_driver pch_udc_driver = {
        .name = KBUILD_MODNAME,
        .id_table =     pch_udc_pcidev_id,
        .probe =        pch_udc_probe,
        .remove =       pch_udc_remove,
        .shutdown =     pch_udc_shutdown,
        .driver = {
                .pm = PCH_UDC_PM_OPS,
        },
};

module_pci_driver(pch_udc_driver);

MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>");
MODULE_LICENSE("GPL");