drivers/usb/host/Kconfig

   1 #
   2 # USB Host Controller Drivers
   3 #
   4 comment "USB Host Controller Drivers"
   5
   6 config USB_C67X00_HCD
   7         tristate "Cypress C67x00 HCD support"
   8         help
   9           The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
  10           host/peripheral/OTG USB controllers.
  11
  12           Enable this option to support this chip in host controller mode.
  13           If unsure, say N.
  14
  15           To compile this driver as a module, choose M here: the
  16           module will be called c67x00.
  17
  18 config USB_XHCI_HCD
  19         tristate "xHCI HCD (USB 3.0) support"
  20         ---help---
  21           The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
  22           "SuperSpeed" host controller hardware.
  23
  24           To compile this driver as a module, choose M here: the
  25           module will be called xhci-hcd.
  26
  27 if USB_XHCI_HCD
  28
  29 config USB_XHCI_PLATFORM
  30         tristate
  31
  32 config USB_XHCI_MVEBU
  33         tristate "xHCI support for Marvell Armada 375/38x"
  34         select USB_XHCI_PLATFORM
  35         depends on ARCH_MVEBU || COMPILE_TEST
  36         ---help---
  37           Say 'Y' to enable the support for the xHCI host controller
  38           found in Marvell Armada 375/38x ARM SOCs.
  39
  40 endif # USB_XHCI_HCD
  41
  42 config USB_EHCI_HCD
  43         tristate "EHCI HCD (USB 2.0) support"
  44         ---help---
  45           The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
  46           "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
  47           If your USB host controller supports USB 2.0, you will likely want to
  48           configure this Host Controller Driver.
  49
  50           EHCI controllers are packaged with "companion" host controllers (OHCI
  51           or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
  52           will connect to EHCI if the device is high speed, otherwise they
  53           connect to a companion controller.  If you configure EHCI, you should
  54           probably configure the OHCI (for NEC and some other vendors) USB Host
  55           Controller Driver or UHCI (for Via motherboards) Host Controller
  56           Driver too.
  57
  58           You may want to read <file:Documentation/usb/ehci.txt>.
  59
  60           To compile this driver as a module, choose M here: the
  61           module will be called ehci-hcd.
  62
  63 config USB_EHCI_ROOT_HUB_TT
  64         bool "Root Hub Transaction Translators"
  65         depends on USB_EHCI_HCD
  66         ---help---
  67           Some EHCI chips have vendor-specific extensions to integrate
  68           transaction translators, so that no OHCI or UHCI companion
  69           controller is needed.  It's safe to say "y" even if your
  70           controller doesn't support this feature.
  71
  72           This supports the EHCI implementation that's originally
  73           from ARC, and has since changed hands a few times.
  74
  75 config USB_EHCI_TT_NEWSCHED
  76         bool "Improved Transaction Translator scheduling"
  77         depends on USB_EHCI_HCD
  78         default y
  79         ---help---
  80           This changes the periodic scheduling code to fill more of the low
  81           and full speed bandwidth available from the Transaction Translator
  82           (TT) in USB 2.0 hubs.  Without this, only one transfer will be
  83           issued in each microframe, significantly reducing the number of
  84           periodic low/fullspeed transfers possible.
  85
  86           If you have multiple periodic low/fullspeed devices connected to a
  87           highspeed USB hub which is connected to a highspeed USB Host
  88           Controller, and some of those devices will not work correctly
  89           (possibly due to "ENOSPC" or "-28" errors), say Y.  Conversely, if
  90           you have only one such device and it doesn't work, you could try
  91           saying N.
  92
  93           If unsure, say Y.
  94
  95 config USB_FSL_MPH_DR_OF
  96         tristate
  97
  98 if USB_EHCI_HCD
  99
 100 config USB_EHCI_PCI
 101         tristate
 102         depends on PCI
 103         default y
 104
 105 config USB_EHCI_HCD_PMC_MSP
 106         tristate "EHCI support for on-chip PMC MSP71xx USB controller"
 107         depends on MSP_HAS_USB
 108         default n
 109         select USB_EHCI_BIG_ENDIAN_DESC
 110         select USB_EHCI_BIG_ENDIAN_MMIO
 111         ---help---
 112                 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
 113                 If unsure, say N.
 114
 115 config XPS_USB_HCD_XILINX
 116         bool "Use Xilinx usb host EHCI controller core"
 117         depends on (PPC32 || MICROBLAZE)
 118         select USB_EHCI_BIG_ENDIAN_DESC
 119         select USB_EHCI_BIG_ENDIAN_MMIO
 120         ---help---
 121                 Xilinx xps USB host controller core is EHCI compilant and has
 122                 transaction translator built-in. It can be configured to either
 123                 support both high speed and full speed devices, or high speed
 124                 devices only.
 125
 126 config USB_EHCI_FSL
 127         bool "Support for Freescale PPC on-chip EHCI USB controller"
 128         depends on FSL_SOC
 129         select USB_EHCI_ROOT_HUB_TT
 130         select USB_FSL_MPH_DR_OF if OF
 131         ---help---
 132           Variation of ARC USB block used in some Freescale chips.
 133
 134 config USB_EHCI_MXC
 135         tristate "Support for Freescale i.MX on-chip EHCI USB controller"
 136         depends on ARCH_MXC
 137         select USB_EHCI_ROOT_HUB_TT
 138         ---help---
 139           Variation of ARC USB block used in some Freescale chips.
 140
 141 config USB_EHCI_HCD_OMAP
 142         tristate "EHCI support for OMAP3 and later chips"
 143         depends on ARCH_OMAP
 144         select NOP_USB_XCEIV
 145         default y
 146         ---help---
 147           Enables support for the on-chip EHCI controller on
 148           OMAP3 and later chips.
 149
 150 config USB_EHCI_HCD_ORION
 151         tristate  "Support for Marvell EBU on-chip EHCI USB controller"
 152         depends on USB_EHCI_HCD && PLAT_ORION
 153         default y
 154         ---help---
 155           Enables support for the on-chip EHCI controller on Marvell's
 156           embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
 157           Armada 370.  This is different from the EHCI implementation
 158           on Marvell's mobile PXA and MMP SoC, see "EHCI support for
 159           Marvell PXA/MMP USB controller" for those.
 160
 161 config USB_EHCI_HCD_SPEAR
 162         tristate "Support for ST SPEAr on-chip EHCI USB controller"
 163         depends on USB_EHCI_HCD && PLAT_SPEAR
 164         default y
 165         ---help---
 166           Enables support for the on-chip EHCI controller on
 167           ST SPEAr chips.
 168
 169 config USB_EHCI_HCD_AT91
 170         tristate  "Support for Atmel on-chip EHCI USB controller"
 171         depends on USB_EHCI_HCD && ARCH_AT91
 172         default y
 173         ---help---
 174           Enables support for the on-chip EHCI controller on
 175           Atmel chips.
 176
 177 config USB_EHCI_MSM
 178         tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
 179         depends on ARCH_MSM || ARCH_QCOM
 180         select USB_EHCI_ROOT_HUB_TT
 181         ---help---
 182           Enables support for the USB Host controller present on the
 183           Qualcomm chipsets. Root Hub has inbuilt TT.
 184           This driver depends on OTG driver for PHY initialization,
 185           clock management, powering up VBUS, and power management.
 186           This driver is not supported on boards like trout which
 187           has an external PHY.
 188
 189 config USB_EHCI_TEGRA
 190        tristate "NVIDIA Tegra HCD support"
 191        depends on ARCH_TEGRA
 192        select USB_EHCI_ROOT_HUB_TT
 193        select USB_PHY
 194        help
 195          This driver enables support for the internal USB Host Controllers
 196          found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
 197
 198 config USB_EHCI_HCD_PPC_OF
 199         bool "EHCI support for PPC USB controller on OF platform bus"
 200         depends on PPC_OF
 201         default y
 202         ---help---
 203           Enables support for the USB controller present on the PowerPC
 204           OpenFirmware platform bus.
 205
 206 config USB_EHCI_SH
 207         bool "EHCI support for SuperH USB controller"
 208         depends on SUPERH
 209         ---help---
 210           Enables support for the on-chip EHCI controller on the SuperH.
 211           If you use the PCI EHCI controller, this option is not necessary.
 212
 213 config USB_EHCI_EXYNOS
 214        tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
 215        depends on PLAT_S5P || ARCH_EXYNOS
 216        help
 217         Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
 218
 219 config USB_EHCI_MV
 220         bool "EHCI support for Marvell PXA/MMP USB controller"
 221         depends on (ARCH_PXA || ARCH_MMP)
 222         select USB_EHCI_ROOT_HUB_TT
 223         ---help---
 224           Enables support for Marvell (including PXA and MMP series) on-chip
 225           USB SPH and OTG controller. SPH is a single port host, and it can
 226           only be EHCI host. OTG is controller that can switch to host mode.
 227           Note that this driver will not work on Marvell's other EHCI
 228           controller used by the EBU-type SoCs including Orion, Kirkwood,
 229           Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
 230           on-chip EHCI USB controller" for those.
 231
 232 config USB_W90X900_EHCI
 233         tristate "W90X900(W90P910) EHCI support"
 234         depends on ARCH_W90X900
 235         ---help---
 236                 Enables support for the W90X900 USB controller
 237
 238 config USB_CNS3XXX_EHCI
 239         bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
 240         depends on ARCH_CNS3XXX
 241         select USB_EHCI_HCD_PLATFORM
 242         ---help---
 243           This option is deprecated now and the driver was removed, use
 244           USB_EHCI_HCD_PLATFORM instead.
 245
 246           Enable support for the CNS3XXX SOC's on-chip EHCI controller.
 247           It is needed for high-speed (480Mbit/sec) USB 2.0 device
 248           support.
 249
 250 config USB_EHCI_ATH79
 251         bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
 252         depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
 253         select USB_EHCI_ROOT_HUB_TT
 254         select USB_EHCI_HCD_PLATFORM
 255         default y
 256         ---help---
 257           This option is deprecated now and the driver was removed, use
 258           USB_EHCI_HCD_PLATFORM instead.
 259
 260           Enables support for the built-in EHCI controller present
 261           on the Atheros AR7XXX/AR9XXX SoCs.
 262
 263 config USB_EHCI_HCD_PLATFORM
 264         tristate "Generic EHCI driver for a platform device"
 265         default n
 266         ---help---
 267           Adds an EHCI host driver for a generic platform device, which
 268           provides a memory space and an irq.
 269
 270           If unsure, say N.
 271
 272 config USB_OCTEON_EHCI
 273         bool "Octeon on-chip EHCI support"
 274         depends on CAVIUM_OCTEON_SOC
 275         default n
 276         select USB_EHCI_BIG_ENDIAN_MMIO
 277         help
 278           Enable support for the Octeon II SOC's on-chip EHCI
 279           controller.  It is needed for high-speed (480Mbit/sec)
 280           USB 2.0 device support.  All CN6XXX based chips with USB are
 281           supported.
 282
 283 endif # USB_EHCI_HCD
 284
 285 config USB_OXU210HP_HCD
 286         tristate "OXU210HP HCD support"
 287         ---help---
 288           The OXU210HP is an USB host/OTG/device controller. Enable this
 289           option if your board has this chip. If unsure, say N.
 290
 291           This driver does not support isochronous transfers and doesn't
 292           implement OTG nor USB device controllers.
 293
 294           To compile this driver as a module, choose M here: the
 295           module will be called oxu210hp-hcd.
 296
 297 config USB_ISP116X_HCD
 298         tristate "ISP116X HCD support"
 299         ---help---
 300           The ISP1160 and ISP1161 chips are USB host controllers. Enable this
 301           option if your board has this chip. If unsure, say N.
 302
 303           This driver does not support isochronous transfers.
 304
 305           To compile this driver as a module, choose M here: the
 306           module will be called isp116x-hcd.
 307
 308 config USB_ISP1760_HCD
 309         tristate "ISP 1760 HCD support"
 310         ---help---
 311           The ISP1760 chip is a USB 2.0 host controller.
 312
 313           This driver does not support isochronous transfers or OTG.
 314           This USB controller is usually attached to a non-DMA-Master
 315           capable bus. NXP's eval kit brings this chip on PCI card
 316           where the chip itself is behind a PLB to simulate such
 317           a bus.
 318
 319           To compile this driver as a module, choose M here: the
 320           module will be called isp1760.
 321
 322 config USB_ISP1362_HCD
 323         tristate "ISP1362 HCD support"
 324         ---help---
 325           Supports the Philips ISP1362 chip as a host controller
 326
 327           This driver does not support isochronous transfers.
 328
 329           To compile this driver as a module, choose M here: the
 330           module will be called isp1362-hcd.
 331
 332 config USB_FUSBH200_HCD
 333         tristate "FUSBH200 HCD support"
 334         depends on USB
 335         ---help---
 336         Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
 337         with minor modification.
 338
 339         To compile this driver as a module, choose M here: the
 340         module will be called fusbh200-hcd.
 341
 342 config USB_FOTG210_HCD
 343         tristate "FOTG210 HCD support"
 344         depends on USB
 345         ---help---
 346           Faraday FOTG210 is an OTG controller which can be configured as
 347           an USB2.0 host. It is designed to meet USB2.0 EHCI specification
 348           with minor modification.
 349
 350           To compile this driver as a module, choose M here: the
 351           module will be called fotg210-hcd.
 352
 353 config USB_MAX3421_HCD
 354         tristate "MAX3421 HCD (USB-over-SPI) support"
 355         depends on USB && SPI
 356         ---help---
 357           The Maxim MAX3421E chip supports standard USB 2.0-compliant
 358           full-speed devices either in host or peripheral mode.  This
 359           driver supports the host-mode of the MAX3421E only.
 360
 361           To compile this driver as a module, choose M here: the module will
 362           be called max3421-hcd.
 363
 364 config USB_OHCI_HCD
 365         tristate "OHCI HCD (USB 1.1) support"
 366         ---help---
 367           The Open Host Controller Interface (OHCI) is a standard for accessing
 368           USB 1.1 host controller hardware.  It does more in hardware than Intel's
 369           UHCI specification.  If your USB host controller follows the OHCI spec,
 370           say Y.  On most non-x86 systems, and on x86 hardware that's not using a
 371           USB controller from Intel or VIA, this is appropriate.  If your host
 372           controller doesn't use PCI, this is probably appropriate.  For a PCI
 373           based system where you're not sure, the "lspci -v" entry will list the
 374           right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
 375
 376           To compile this driver as a module, choose M here: the
 377           module will be called ohci-hcd.
 378
 379 if USB_OHCI_HCD
 380
 381 config USB_OHCI_HCD_OMAP1
 382         tristate "OHCI support for OMAP1/2 chips"
 383         depends on ARCH_OMAP1
 384         depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
 385         default y
 386         ---help---
 387           Enables support for the OHCI controller on OMAP1/2 chips.
 388
 389 config USB_OHCI_HCD_SPEAR
 390         tristate "Support for ST SPEAr on-chip OHCI USB controller"
 391         depends on USB_OHCI_HCD && PLAT_SPEAR
 392         default y
 393         ---help---
 394           Enables support for the on-chip OHCI controller on
 395           ST SPEAr chips.
 396
 397 config USB_OHCI_HCD_S3C2410
 398         tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
 399         depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
 400         default y
 401         ---help---
 402           Enables support for the on-chip OHCI controller on
 403           S3C24xx/S3C64xx chips.
 404
 405 config USB_OHCI_HCD_LPC32XX
 406         tristate "Support for LPC on-chip OHCI USB controller"
 407         depends on USB_OHCI_HCD && ARCH_LPC32XX
 408         depends on USB_ISP1301
 409         default y
 410         ---help---
 411           Enables support for the on-chip OHCI controller on
 412           NXP chips.
 413
 414 config USB_OHCI_HCD_PXA27X
 415         tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
 416         depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
 417         default y
 418         ---help---
 419           Enables support for the on-chip OHCI controller on
 420           PXA27x/PXA3xx chips.
 421
 422 config USB_OHCI_HCD_AT91
 423         tristate "Support for Atmel on-chip OHCI USB controller"
 424         depends on USB_OHCI_HCD && ARCH_AT91
 425         default y
 426         ---help---
 427           Enables support for the on-chip OHCI controller on
 428           Atmel chips.
 429
 430 config USB_OHCI_HCD_OMAP3
 431         tristate "OHCI support for OMAP3 and later chips"
 432         depends on (ARCH_OMAP3 || ARCH_OMAP4)
 433         default y
 434         ---help---
 435           Enables support for the on-chip OHCI controller on
 436           OMAP3 and later chips.
 437
 438 config USB_OHCI_HCD_DAVINCI
 439         bool "OHCI support for TI DaVinci DA8xx"
 440         depends on ARCH_DAVINCI_DA8XX
 441         depends on USB_OHCI_HCD=y
 442         default y
 443         help
 444           Enables support for the DaVinci DA8xx integrated OHCI
 445           controller. This driver cannot currently be a loadable
 446           module because it lacks a proper PHY abstraction.
 447
 448 config USB_OHCI_ATH79
 449         bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
 450         depends on (SOC_AR71XX || SOC_AR724X)
 451         select USB_OHCI_HCD_PLATFORM
 452         default y
 453         help
 454           This option is deprecated now and the driver was removed, use
 455           USB_OHCI_HCD_PLATFORM instead.
 456
 457           Enables support for the built-in OHCI controller present on the
 458           Atheros AR71XX/AR7240 SoCs.
 459
 460 config USB_OHCI_HCD_PPC_OF_BE
 461         bool "OHCI support for OF platform bus (big endian)"
 462         depends on PPC_OF
 463         select USB_OHCI_BIG_ENDIAN_DESC
 464         select USB_OHCI_BIG_ENDIAN_MMIO
 465         ---help---
 466           Enables support for big-endian USB controllers present on the
 467           OpenFirmware platform bus.
 468
 469 config USB_OHCI_HCD_PPC_OF_LE
 470         bool "OHCI support for OF platform bus (little endian)"
 471         depends on PPC_OF
 472         select USB_OHCI_LITTLE_ENDIAN
 473         ---help---
 474           Enables support for little-endian USB controllers present on the
 475           OpenFirmware platform bus.
 476
 477 config USB_OHCI_HCD_PPC_OF
 478         bool
 479         depends on PPC_OF
 480         default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 481
 482 config USB_OHCI_HCD_PCI
 483         tristate "OHCI support for PCI-bus USB controllers"
 484         depends on PCI
 485         default y
 486         select USB_OHCI_LITTLE_ENDIAN
 487         ---help---
 488           Enables support for PCI-bus plug-in USB controller cards.
 489           If unsure, say Y.
 490
 491 config USB_OHCI_HCD_SSB
 492         bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
 493         depends on (SSB = y || SSB = USB_OHCI_HCD)
 494         select USB_HCD_SSB
 495         select USB_OHCI_HCD_PLATFORM
 496         default n
 497         ---help---
 498           This option is deprecated now and the driver was removed, use
 499           USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
 500
 501           Support for the Sonics Silicon Backplane (SSB) attached
 502           Broadcom USB OHCI core.
 503
 504           This device is present in some embedded devices with
 505           Broadcom based SSB bus.
 506
 507           If unsure, say N.
 508
 509 config USB_OHCI_SH
 510         bool "OHCI support for SuperH USB controller (DEPRECATED)"
 511         depends on SUPERH
 512         select USB_OHCI_HCD_PLATFORM
 513         ---help---
 514           This option is deprecated now and the driver was removed, use
 515           USB_OHCI_HCD_PLATFORM instead.
 516
 517           Enables support for the on-chip OHCI controller on the SuperH.
 518           If you use the PCI OHCI controller, this option is not necessary.
 519
 520 config USB_OHCI_EXYNOS
 521         tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
 522         depends on PLAT_S5P || ARCH_EXYNOS
 523         help
 524          Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
 525
 526 config USB_CNS3XXX_OHCI
 527         bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
 528         depends on ARCH_CNS3XXX
 529         select USB_OHCI_HCD_PLATFORM
 530         ---help---
 531           This option is deprecated now and the driver was removed, use
 532           USB_OHCI_HCD_PLATFORM instead.
 533
 534           Enable support for the CNS3XXX SOC's on-chip OHCI controller.
 535           It is needed for low-speed USB 1.0 device support.
 536
 537 config USB_OHCI_HCD_PLATFORM
 538         tristate "Generic OHCI driver for a platform device"
 539         default n
 540         ---help---
 541           Adds an OHCI host driver for a generic platform device, which
 542           provides a memory space and an irq.
 543
 544           If unsure, say N.
 545
 546 config USB_OCTEON_OHCI
 547         bool "Octeon on-chip OHCI support"
 548         depends on CAVIUM_OCTEON_SOC
 549         default USB_OCTEON_EHCI
 550         select USB_OHCI_BIG_ENDIAN_MMIO
 551         select USB_OHCI_LITTLE_ENDIAN
 552         help
 553           Enable support for the Octeon II SOC's on-chip OHCI
 554           controller.  It is needed for low-speed USB 1.0 device
 555           support.  All CN6XXX based chips with USB are supported.
 556
 557 endif # USB_OHCI_HCD
 558
 559 config USB_UHCI_HCD
 560         tristate "UHCI HCD (most Intel and VIA) support"
 561         depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
 562         ---help---
 563           The Universal Host Controller Interface is a standard by Intel for
 564           accessing the USB hardware in the PC (which is also called the USB
 565           host controller). If your USB host controller conforms to this
 566           standard, you may want to say Y, but see below. All recent boards
 567           with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
 568           i810, i820) conform to this standard. Also all VIA PCI chipsets
 569           (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
 570           133) and LEON/GRLIB SoCs with the GRUSBHC controller.
 571           If unsure, say Y.
 572
 573           To compile this driver as a module, choose M here: the
 574           module will be called uhci-hcd.
 575
 576 config USB_UHCI_SUPPORT_NON_PCI_HC
 577         bool
 578         default y if (SPARC_LEON || USB_UHCI_PLATFORM)
 579
 580 config USB_UHCI_PLATFORM
 581         bool
 582         default y if ARCH_VT8500
 583
 584 config USB_UHCI_BIG_ENDIAN_MMIO
 585         bool
 586         default y if SPARC_LEON
 587
 588 config USB_UHCI_BIG_ENDIAN_DESC
 589         bool
 590         default y if SPARC_LEON
 591
 592 config USB_FHCI_HCD
 593         tristate "Freescale QE USB Host Controller support"
 594         depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
 595         select FSL_GTM
 596         select QE_USB
 597         help
 598           This driver enables support for Freescale QE USB Host Controller
 599           (as found on MPC8360 and MPC8323 processors), the driver supports
 600           Full and Low Speed USB.
 601
 602 config FHCI_DEBUG
 603         bool "Freescale QE USB Host Controller debug support"
 604         depends on USB_FHCI_HCD && DEBUG_FS
 605         help
 606           Say "y" to see some FHCI debug information and statistics
 607           through debugfs.
 608
 609 config USB_U132_HCD
 610         tristate "Elan U132 Adapter Host Controller"
 611         depends on USB_FTDI_ELAN
 612         help
 613           The U132 adapter is a USB to CardBus adapter specifically designed
 614           for PC cards that contain an OHCI host controller. Typical PC cards
 615           are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
 616           adapter will *NOT* work with PC cards that do not contain an OHCI
 617           controller.
 618
 619           For those PC cards that contain multiple OHCI controllers only the
 620           first one is used.
 621
 622           The driver consists of two modules, the "ftdi-elan" module is a
 623           USB client driver that interfaces to the FTDI chip within ELAN's
 624           USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
 625           controller driver that talks to the OHCI controller within the
 626           CardBus cards that are inserted in the U132 adapter.
 627
 628           This driver has been tested with a CardBus OHCI USB adapter, and
 629           worked with a USB PEN Drive inserted into the first USB port of
 630           the PCCARD. A rather pointless thing to do, but useful for testing.
 631
 632           It is safe to say M here.
 633
 634           See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
 635
 636 config USB_SL811_HCD
 637         tristate "SL811HS HCD support"
 638         help
 639           The SL811HS is a single-port USB controller that supports either
 640           host side or peripheral side roles.  Enable this option if your
 641           board has this chip, and you want to use it as a host controller.
 642           If unsure, say N.
 643
 644           To compile this driver as a module, choose M here: the
 645           module will be called sl811-hcd.
 646
 647 config USB_SL811_HCD_ISO
 648         bool "partial ISO support"
 649         depends on USB_SL811_HCD
 650         help
 651           The driver doesn't support iso_frame_desc (yet), but for some simple
 652           devices that just queue one ISO frame per URB, then ISO transfers
 653           "should" work using the normal urb status fields.
 654
 655           If unsure, say N.
 656
 657 config USB_SL811_CS
 658         tristate "CF/PCMCIA support for SL811HS HCD"
 659         depends on USB_SL811_HCD && PCMCIA
 660         help
 661           Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
 662           REX-CFU1U CF card (often used with PDAs).  If unsure, say N.
 663
 664           To compile this driver as a module, choose M here: the
 665           module will be called "sl811_cs".
 666
 667 config USB_R8A66597_HCD
 668         tristate "R8A66597 HCD support"
 669         help
 670           The R8A66597 is a USB 2.0 host and peripheral controller.
 671
 672           Enable this option if your board has this chip, and you want
 673           to use it as a host controller.  If unsure, say N.
 674
 675           To compile this driver as a module, choose M here: the
 676           module will be called r8a66597-hcd.
 677
 678 config USB_RENESAS_USBHS_HCD
 679         tristate "Renesas USBHS HCD support"
 680         depends on USB_RENESAS_USBHS
 681         help
 682           The Renesas USBHS is a USB 2.0 host and peripheral controller.
 683
 684           Enable this option if your board has this chip, and you want
 685           to use it as a host controller.  If unsure, say N.
 686
 687           To compile this driver as a module, choose M here: the
 688           module will be called renesas-usbhs.
 689
 690 config USB_WHCI_HCD
 691         tristate "Wireless USB Host Controller Interface (WHCI) driver"
 692         depends on PCI && USB && UWB
 693         select USB_WUSB
 694         select UWB_WHCI
 695         help
 696           A driver for PCI-based Wireless USB Host Controllers that are
 697           compliant with the WHCI specification.
 698
 699           To compile this driver a module, choose M here: the module
 700           will be called "whci-hcd".
 701
 702 config USB_HWA_HCD
 703         tristate "Host Wire Adapter (HWA) driver"
 704         depends on UWB
 705         select USB_WUSB
 706         select UWB_HWA
 707         help
 708           This driver enables you to connect Wireless USB devices to
 709           your system using a Host Wire Adaptor USB dongle. This is an
 710           UWB Radio Controller and WUSB Host Controller connected to
 711           your machine via USB (specified in WUSB1.0).
 712
 713           To compile this driver a module, choose M here: the module
 714           will be called "hwa-hc".
 715
 716 config USB_IMX21_HCD
 717        tristate "i.MX21 HCD support"
 718        depends on ARM && ARCH_MXC
 719        help
 720          This driver enables support for the on-chip USB host in the
 721          i.MX21 processor.
 722
 723          To compile this driver as a module, choose M here: the
 724          module will be called "imx21-hcd".
 725
 726
 727
 728 config USB_OCTEON2_COMMON
 729         bool
 730         default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
 731
 732 config USB_HCD_BCMA
 733         tristate "BCMA usb host driver"
 734         depends on BCMA
 735         select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
 736         select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
 737         help
 738           Enable support for the EHCI and OCHI host controller on an bcma bus.
 739           It converts the bcma driver into two platform device drivers
 740           for ehci and ohci.
 741
 742           If unsure, say N.
 743
 744 config USB_HCD_SSB
 745         tristate "SSB usb host driver"
 746         depends on SSB
 747         select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
 748         select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
 749         help
 750           Enable support for the EHCI and OCHI host controller on an bcma bus.
 751           It converts the bcma driver into two platform device drivers
 752           for ehci and ohci.
 753
 754           If unsure, say N.
 755
 756 config USB_HCD_TEST_MODE
 757         bool "HCD test mode support"
 758         ---help---
 759           Say 'Y' to enable additional software test modes that may be
 760           supported by the host controller drivers.
 761
 762           One such test mode is the Embedded High-speed Host Electrical Test
 763           (EHSET) for EHCI host controller hardware, specifically the "Single
 764           Step Set Feature" test.  Typically this will be enabled for On-the-Go
 765           or embedded hosts that need to undergo USB-IF compliance testing with
 766           the aid of special testing hardware.  In the future, this may expand
 767           to include other tests that require support from a HCD driver.
 768
 769           This option is of interest only to developers who need to validate
 770           their USB hardware designs.  It is not needed for normal use.  If
 771           unsure, say N.