Merge tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel...

[mirror_ubuntu-bionic-kernel.git] / drivers / usb / host / ehci-tegra.c

/*
 * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
 *
 * Copyright (C) 2010 Google, Inc.
 * Copyright (C) 2009 NVIDIA Corporation
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 */

#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/platform_data/tegra_usb.h>
#include <linux/irq.h>
#include <linux/usb/otg.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>

#include <mach/usb_phy.h>
#include <mach/iomap.h>

#define TEGRA_USB_DMA_ALIGN 32

struct tegra_ehci_hcd {
        struct ehci_hcd *ehci;
        struct tegra_usb_phy *phy;
        struct clk *clk;
        struct clk *emc_clk;
        struct usb_phy *transceiver;
        int host_resumed;
        int port_resuming;
        enum tegra_usb_phy_port_speed port_speed;
};

static void tegra_ehci_power_up(struct usb_hcd *hcd)
{
        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);

        clk_prepare_enable(tegra->emc_clk);
        clk_prepare_enable(tegra->clk);
        tegra_usb_phy_power_on(tegra->phy);
        tegra->host_resumed = 1;
}

static void tegra_ehci_power_down(struct usb_hcd *hcd)
{
        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);

        tegra->host_resumed = 0;
        tegra_usb_phy_power_off(tegra->phy);
        clk_disable_unprepare(tegra->clk);
        clk_disable_unprepare(tegra->emc_clk);
}

static int tegra_ehci_internal_port_reset(
        struct ehci_hcd *ehci,
        u32 __iomem     *portsc_reg
)
{
        u32             temp;
        unsigned long   flags;
        int             retval = 0;
        int             i, tries;
        u32             saved_usbintr;

        spin_lock_irqsave(&ehci->lock, flags);
        saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable);
        /* disable USB interrupt */
        ehci_writel(ehci, 0, &ehci->regs->intr_enable);
        spin_unlock_irqrestore(&ehci->lock, flags);

        /*
         * Here we have to do Port Reset at most twice for
         * Port Enable bit to be set.
         */
        for (i = 0; i < 2; i++) {
                temp = ehci_readl(ehci, portsc_reg);
                temp |= PORT_RESET;
                ehci_writel(ehci, temp, portsc_reg);
                mdelay(10);
                temp &= ~PORT_RESET;
                ehci_writel(ehci, temp, portsc_reg);
                mdelay(1);
                tries = 100;
                do {
                        mdelay(1);
                        /*
                         * Up to this point, Port Enable bit is
                         * expected to be set after 2 ms waiting.
                         * USB1 usually takes extra 45 ms, for safety,
                         * we take 100 ms as timeout.
                         */
                        temp = ehci_readl(ehci, portsc_reg);
                } while (!(temp & PORT_PE) && tries--);
                if (temp & PORT_PE)
                        break;
        }
        if (i == 2)
                retval = -ETIMEDOUT;

        /*
         * Clear Connect Status Change bit if it's set.
         * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared.
         */
        if (temp & PORT_CSC)
                ehci_writel(ehci, PORT_CSC, portsc_reg);

        /*
         * Write to clear any interrupt status bits that might be set
         * during port reset.
         */
        temp = ehci_readl(ehci, &ehci->regs->status);
        ehci_writel(ehci, temp, &ehci->regs->status);

        /* restore original interrupt enable bits */
        ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable);
        return retval;
}

static int tegra_ehci_hub_control(
        struct usb_hcd  *hcd,
        u16             typeReq,
        u16             wValue,
        u16             wIndex,
        char            *buf,
        u16             wLength
)
{
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
        u32 __iomem     *status_reg;
        u32             temp;
        unsigned long   flags;
        int             retval = 0;

        status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];

        spin_lock_irqsave(&ehci->lock, flags);

        if (typeReq == GetPortStatus) {
                temp = ehci_readl(ehci, status_reg);
                if (tegra->port_resuming && !(temp & PORT_SUSPEND)) {
                        /* Resume completed, re-enable disconnect detection */
                        tegra->port_resuming = 0;
                        tegra_usb_phy_postresume(tegra->phy);
                }
        }

        else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
                temp = ehci_readl(ehci, status_reg);
                if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
                        retval = -EPIPE;
                        goto done;
                }

                temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
                temp |= PORT_WKDISC_E | PORT_WKOC_E;
                ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);

                /*
                 * If a transaction is in progress, there may be a delay in
                 * suspending the port. Poll until the port is suspended.
                 */
                if (handshake(ehci, status_reg, PORT_SUSPEND,
                                                PORT_SUSPEND, 5000))
                        pr_err("%s: timeout waiting for SUSPEND\n", __func__);

                set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
                goto done;
        }

        /* For USB1 port we need to issue Port Reset twice internally */
        if (tegra->phy->instance == 0 &&
           (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) {
                spin_unlock_irqrestore(&ehci->lock, flags);
                return tegra_ehci_internal_port_reset(ehci, status_reg);
        }

        /*
         * Tegra host controller will time the resume operation to clear the bit
         * when the port control state switches to HS or FS Idle. This behavior
         * is different from EHCI where the host controller driver is required
         * to set this bit to a zero after the resume duration is timed in the
         * driver.
         */
        else if (typeReq == ClearPortFeature &&
                                        wValue == USB_PORT_FEAT_SUSPEND) {
                temp = ehci_readl(ehci, status_reg);
                if ((temp & PORT_RESET) || !(temp & PORT_PE)) {
                        retval = -EPIPE;
                        goto done;
                }

                if (!(temp & PORT_SUSPEND))
                        goto done;

                /* Disable disconnect detection during port resume */
                tegra_usb_phy_preresume(tegra->phy);

                ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);

                temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
                /* start resume signalling */
                ehci_writel(ehci, temp | PORT_RESUME, status_reg);
                set_bit(wIndex-1, &ehci->resuming_ports);

                spin_unlock_irqrestore(&ehci->lock, flags);
                msleep(20);
                spin_lock_irqsave(&ehci->lock, flags);

                /* Poll until the controller clears RESUME and SUSPEND */
                if (handshake(ehci, status_reg, PORT_RESUME, 0, 2000))
                        pr_err("%s: timeout waiting for RESUME\n", __func__);
                if (handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000))
                        pr_err("%s: timeout waiting for SUSPEND\n", __func__);

                ehci->reset_done[wIndex-1] = 0;
                clear_bit(wIndex-1, &ehci->resuming_ports);

                tegra->port_resuming = 1;
                goto done;
        }

        spin_unlock_irqrestore(&ehci->lock, flags);

        /* Handle the hub control events here */
        return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
done:
        spin_unlock_irqrestore(&ehci->lock, flags);
        return retval;
}

static void tegra_ehci_restart(struct usb_hcd *hcd)
{
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);

        ehci_reset(ehci);

        /* setup the frame list and Async q heads */
        ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
        ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
        /* setup the command register and set the controller in RUN mode */
        ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
        ehci->command |= CMD_RUN;
        ehci_writel(ehci, ehci->command, &ehci->regs->command);

        down_write(&ehci_cf_port_reset_rwsem);
        ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
        /* flush posted writes */
        ehci_readl(ehci, &ehci->regs->command);
        up_write(&ehci_cf_port_reset_rwsem);
}

static void tegra_ehci_shutdown(struct usb_hcd *hcd)
{
        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);

        /* ehci_shutdown touches the USB controller registers, make sure
         * controller has clocks to it */
        if (!tegra->host_resumed)
                tegra_ehci_power_up(hcd);

        ehci_shutdown(hcd);
}

static int tegra_ehci_setup(struct usb_hcd *hcd)
{
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        int retval;

        /* EHCI registers start at offset 0x100 */
        ehci->caps = hcd->regs + 0x100;

        /* switch to host mode */
        hcd->has_tt = 1;

        retval = ehci_setup(hcd);
        if (retval)
                return retval;

        ehci_port_power(ehci, 1);
        return retval;
}

struct dma_aligned_buffer {
        void *kmalloc_ptr;
        void *old_xfer_buffer;
        u8 data[0];
};

static void free_dma_aligned_buffer(struct urb *urb)
{
        struct dma_aligned_buffer *temp;

        if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
                return;

        temp = container_of(urb->transfer_buffer,
                struct dma_aligned_buffer, data);

        if (usb_urb_dir_in(urb))
                memcpy(temp->old_xfer_buffer, temp->data,
                       urb->transfer_buffer_length);
        urb->transfer_buffer = temp->old_xfer_buffer;
        kfree(temp->kmalloc_ptr);

        urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
}

static int alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
{
        struct dma_aligned_buffer *temp, *kmalloc_ptr;
        size_t kmalloc_size;

        if (urb->num_sgs || urb->sg ||
            urb->transfer_buffer_length == 0 ||
            !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1)))
                return 0;

        /* Allocate a buffer with enough padding for alignment */
        kmalloc_size = urb->transfer_buffer_length +
                sizeof(struct dma_aligned_buffer) + TEGRA_USB_DMA_ALIGN - 1;

        kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
        if (!kmalloc_ptr)
                return -ENOMEM;

        /* Position our struct dma_aligned_buffer such that data is aligned */
        temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1;
        temp->kmalloc_ptr = kmalloc_ptr;
        temp->old_xfer_buffer = urb->transfer_buffer;
        if (usb_urb_dir_out(urb))
                memcpy(temp->data, urb->transfer_buffer,
                       urb->transfer_buffer_length);
        urb->transfer_buffer = temp->data;

        urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;

        return 0;
}

static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
                                      gfp_t mem_flags)
{
        int ret;

        ret = alloc_dma_aligned_buffer(urb, mem_flags);
        if (ret)
                return ret;

        ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
        if (ret)
                free_dma_aligned_buffer(urb);

        return ret;
}

static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
{
        usb_hcd_unmap_urb_for_dma(hcd, urb);
        free_dma_aligned_buffer(urb);
}

static const struct hc_driver tegra_ehci_hc_driver = {
        .description            = hcd_name,
        .product_desc           = "Tegra EHCI Host Controller",
        .hcd_priv_size          = sizeof(struct ehci_hcd),
        .flags                  = HCD_USB2 | HCD_MEMORY,

        /* standard ehci functions */
        .irq                    = ehci_irq,
        .start                  = ehci_run,
        .stop                   = ehci_stop,
        .urb_enqueue            = ehci_urb_enqueue,
        .urb_dequeue            = ehci_urb_dequeue,
        .endpoint_disable       = ehci_endpoint_disable,
        .endpoint_reset         = ehci_endpoint_reset,
        .get_frame_number       = ehci_get_frame,
        .hub_status_data        = ehci_hub_status_data,
        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
        .relinquish_port        = ehci_relinquish_port,
        .port_handed_over       = ehci_port_handed_over,

        /* modified ehci functions for tegra */
        .reset                  = tegra_ehci_setup,
        .shutdown               = tegra_ehci_shutdown,
        .map_urb_for_dma        = tegra_ehci_map_urb_for_dma,
        .unmap_urb_for_dma      = tegra_ehci_unmap_urb_for_dma,
        .hub_control            = tegra_ehci_hub_control,
#ifdef CONFIG_PM
        .bus_suspend            = ehci_bus_suspend,
        .bus_resume             = ehci_bus_resume,
#endif
};

static int setup_vbus_gpio(struct platform_device *pdev,
                           struct tegra_ehci_platform_data *pdata)
{
        int err = 0;
        int gpio;

        gpio = pdata->vbus_gpio;
        if (!gpio_is_valid(gpio))
                gpio = of_get_named_gpio(pdev->dev.of_node,
                                         "nvidia,vbus-gpio", 0);
        if (!gpio_is_valid(gpio))
                return 0;

        err = gpio_request(gpio, "vbus_gpio");
        if (err) {
                dev_err(&pdev->dev, "can't request vbus gpio %d", gpio);
                return err;
        }
        err = gpio_direction_output(gpio, 1);
        if (err) {
                dev_err(&pdev->dev, "can't enable vbus\n");
                return err;
        }

        return err;
}

#ifdef CONFIG_PM

static int controller_suspend(struct device *dev)
{
        struct tegra_ehci_hcd *tegra =
                        platform_get_drvdata(to_platform_device(dev));
        struct ehci_hcd *ehci = tegra->ehci;
        struct usb_hcd *hcd = ehci_to_hcd(ehci);
        struct ehci_regs __iomem *hw = ehci->regs;
        unsigned long flags;

        if (time_before(jiffies, ehci->next_statechange))
                msleep(10);

        ehci_halt(ehci);

        spin_lock_irqsave(&ehci->lock, flags);
        tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
        spin_unlock_irqrestore(&ehci->lock, flags);

        tegra_ehci_power_down(hcd);
        return 0;
}

static int controller_resume(struct device *dev)
{
        struct tegra_ehci_hcd *tegra =
                        platform_get_drvdata(to_platform_device(dev));
        struct ehci_hcd *ehci = tegra->ehci;
        struct usb_hcd *hcd = ehci_to_hcd(ehci);
        struct ehci_regs __iomem *hw = ehci->regs;
        unsigned long val;

        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
        tegra_ehci_power_up(hcd);

        if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
                /* Wait for the phy to detect new devices
                 * before we restart the controller */
                msleep(10);
                goto restart;
        }

        /* Force the phy to keep data lines in suspend state */
        tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);

        /* Enable host mode */
        tdi_reset(ehci);

        /* Enable Port Power */
        val = readl(&hw->port_status[0]);
        val |= PORT_POWER;
        writel(val, &hw->port_status[0]);
        udelay(10);

        /* Check if the phy resume from LP0. When the phy resume from LP0
         * USB register will be reset. */
        if (!readl(&hw->async_next)) {
                /* Program the field PTC based on the saved speed mode */
                val = readl(&hw->port_status[0]);
                val &= ~PORT_TEST(~0);
                if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
                        val |= PORT_TEST_FORCE;
                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
                        val |= PORT_TEST(6);
                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
                        val |= PORT_TEST(7);
                writel(val, &hw->port_status[0]);
                udelay(10);

                /* Disable test mode by setting PTC field to NORMAL_OP */
                val = readl(&hw->port_status[0]);
                val &= ~PORT_TEST(~0);
                writel(val, &hw->port_status[0]);
                udelay(10);
        }

        /* Poll until CCS is enabled */
        if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
                                                 PORT_CONNECT, 2000)) {
                pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
                goto restart;
        }

        /* Poll until PE is enabled */
        if (handshake(ehci, &hw->port_status[0], PORT_PE,
                                                 PORT_PE, 2000)) {
                pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
                goto restart;
        }

        /* Clear the PCI status, to avoid an interrupt taken upon resume */
        val = readl(&hw->status);
        val |= STS_PCD;
        writel(val, &hw->status);

        /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
        val = readl(&hw->port_status[0]);
        if ((val & PORT_POWER) && (val & PORT_PE)) {
                val |= PORT_SUSPEND;
                writel(val, &hw->port_status[0]);

                /* Wait until port suspend completes */
                if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
                                                         PORT_SUSPEND, 1000)) {
                        pr_err("%s: timeout waiting for PORT_SUSPEND\n",
                                                                __func__);
                        goto restart;
                }
        }

        tegra_ehci_phy_restore_end(tegra->phy);
        goto done;

 restart:
        if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
                tegra_ehci_phy_restore_end(tegra->phy);

        tegra_ehci_restart(hcd);

 done:
        tegra_usb_phy_preresume(tegra->phy);
        tegra->port_resuming = 1;
        return 0;
}

static int tegra_ehci_suspend(struct device *dev)
{
        struct tegra_ehci_hcd *tegra =
                        platform_get_drvdata(to_platform_device(dev));
        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
        int rc = 0;

        /*
         * When system sleep is supported and USB controller wakeup is
         * implemented: If the controller is runtime-suspended and the
         * wakeup setting needs to be changed, call pm_runtime_resume().
         */
        if (HCD_HW_ACCESSIBLE(hcd))
                rc = controller_suspend(dev);
        return rc;
}

static int tegra_ehci_resume(struct device *dev)
{
        int rc;

        rc = controller_resume(dev);
        if (rc == 0) {
                pm_runtime_disable(dev);
                pm_runtime_set_active(dev);
                pm_runtime_enable(dev);
        }
        return rc;
}

static int tegra_ehci_runtime_suspend(struct device *dev)
{
        return controller_suspend(dev);
}

static int tegra_ehci_runtime_resume(struct device *dev)
{
        return controller_resume(dev);
}

static const struct dev_pm_ops tegra_ehci_pm_ops = {
        .suspend        = tegra_ehci_suspend,
        .resume         = tegra_ehci_resume,
        .runtime_suspend = tegra_ehci_runtime_suspend,
        .runtime_resume = tegra_ehci_runtime_resume,
};

#endif

static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);

static int tegra_ehci_probe(struct platform_device *pdev)
{
        struct resource *res;
        struct usb_hcd *hcd;
        struct tegra_ehci_hcd *tegra;
        struct tegra_ehci_platform_data *pdata;
        int err = 0;
        int irq;
        int instance = pdev->id;

        pdata = pdev->dev.platform_data;
        if (!pdata) {
                dev_err(&pdev->dev, "Platform data missing\n");
                return -EINVAL;
        }

        /* Right now device-tree probed devices don't get dma_mask set.
         * Since shared usb code relies on it, set it here for now.
         * Once we have dma capability bindings this can go away.
         */
        if (!pdev->dev.dma_mask)
                pdev->dev.dma_mask = &tegra_ehci_dma_mask;

        setup_vbus_gpio(pdev, pdata);

        tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL);
        if (!tegra)
                return -ENOMEM;

        hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev,
                                        dev_name(&pdev->dev));
        if (!hcd) {
                dev_err(&pdev->dev, "Unable to create HCD\n");
                err = -ENOMEM;
                goto fail_hcd;
        }

        platform_set_drvdata(pdev, tegra);

        tegra->clk = clk_get(&pdev->dev, NULL);
        if (IS_ERR(tegra->clk)) {
                dev_err(&pdev->dev, "Can't get ehci clock\n");
                err = PTR_ERR(tegra->clk);
                goto fail_clk;
        }

        err = clk_prepare_enable(tegra->clk);
        if (err)
                goto fail_clken;

        tegra->emc_clk = clk_get(&pdev->dev, "emc");
        if (IS_ERR(tegra->emc_clk)) {
                dev_err(&pdev->dev, "Can't get emc clock\n");
                err = PTR_ERR(tegra->emc_clk);
                goto fail_emc_clk;
        }

        clk_prepare_enable(tegra->emc_clk);
        clk_set_rate(tegra->emc_clk, 400000000);

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
                dev_err(&pdev->dev, "Failed to get I/O memory\n");
                err = -ENXIO;
                goto fail_io;
        }
        hcd->rsrc_start = res->start;
        hcd->rsrc_len = resource_size(res);
        hcd->regs = ioremap(res->start, resource_size(res));
        if (!hcd->regs) {
                dev_err(&pdev->dev, "Failed to remap I/O memory\n");
                err = -ENOMEM;
                goto fail_io;
        }

        /* This is pretty ugly and needs to be fixed when we do only
         * device-tree probing. Old code relies on the platform_device
         * numbering that we lack for device-tree-instantiated devices.
         */
        if (instance < 0) {
                switch (res->start) {
                case TEGRA_USB_BASE:
                        instance = 0;
                        break;
                case TEGRA_USB2_BASE:
                        instance = 1;
                        break;
                case TEGRA_USB3_BASE:
                        instance = 2;
                        break;
                default:
                        err = -ENODEV;
                        dev_err(&pdev->dev, "unknown usb instance\n");
                        goto fail_phy;
                }
        }

        tegra->phy = tegra_usb_phy_open(&pdev->dev, instance, hcd->regs,
                                        pdata->phy_config,
                                        TEGRA_USB_PHY_MODE_HOST);
        if (IS_ERR(tegra->phy)) {
                dev_err(&pdev->dev, "Failed to open USB phy\n");
                err = -ENXIO;
                goto fail_phy;
        }

        err = tegra_usb_phy_power_on(tegra->phy);
        if (err) {
                dev_err(&pdev->dev, "Failed to power on the phy\n");
                goto fail;
        }

        tegra->host_resumed = 1;
        tegra->ehci = hcd_to_ehci(hcd);

        irq = platform_get_irq(pdev, 0);
        if (!irq) {
                dev_err(&pdev->dev, "Failed to get IRQ\n");
                err = -ENODEV;
                goto fail;
        }

#ifdef CONFIG_USB_OTG_UTILS
        if (pdata->operating_mode == TEGRA_USB_OTG) {
                tegra->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
                if (!IS_ERR_OR_NULL(tegra->transceiver))
                        otg_set_host(tegra->transceiver->otg, &hcd->self);
        }
#endif

        err = usb_add_hcd(hcd, irq, IRQF_SHARED);
        if (err) {
                dev_err(&pdev->dev, "Failed to add USB HCD\n");
                goto fail;
        }

        pm_runtime_set_active(&pdev->dev);
        pm_runtime_get_noresume(&pdev->dev);

        /* Don't skip the pm_runtime_forbid call if wakeup isn't working */
        /* if (!pdata->power_down_on_bus_suspend) */
                pm_runtime_forbid(&pdev->dev);
        pm_runtime_enable(&pdev->dev);
        pm_runtime_put_sync(&pdev->dev);
        return err;

fail:
#ifdef CONFIG_USB_OTG_UTILS
        if (!IS_ERR_OR_NULL(tegra->transceiver)) {
                otg_set_host(tegra->transceiver->otg, NULL);
                usb_put_phy(tegra->transceiver);
        }
#endif
        tegra_usb_phy_close(tegra->phy);
fail_phy:
        iounmap(hcd->regs);
fail_io:
        clk_disable_unprepare(tegra->emc_clk);
        clk_put(tegra->emc_clk);
fail_emc_clk:
        clk_disable_unprepare(tegra->clk);
fail_clken:
        clk_put(tegra->clk);
fail_clk:
        usb_put_hcd(hcd);
fail_hcd:
        kfree(tegra);
        return err;
}

static int tegra_ehci_remove(struct platform_device *pdev)
{
        struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);

        if (tegra == NULL || hcd == NULL)
                return -EINVAL;

        pm_runtime_get_sync(&pdev->dev);
        pm_runtime_disable(&pdev->dev);
        pm_runtime_put_noidle(&pdev->dev);

#ifdef CONFIG_USB_OTG_UTILS
        if (!IS_ERR_OR_NULL(tegra->transceiver)) {
                otg_set_host(tegra->transceiver->otg, NULL);
                usb_put_phy(tegra->transceiver);
        }
#endif

        usb_remove_hcd(hcd);
        usb_put_hcd(hcd);

        tegra_usb_phy_close(tegra->phy);
        iounmap(hcd->regs);

        clk_disable_unprepare(tegra->clk);
        clk_put(tegra->clk);

        clk_disable_unprepare(tegra->emc_clk);
        clk_put(tegra->emc_clk);

        kfree(tegra);
        return 0;
}

static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
{
        struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);

        if (hcd->driver->shutdown)
                hcd->driver->shutdown(hcd);
}

static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
        { .compatible = "nvidia,tegra20-ehci", },
        { },
};

static struct platform_driver tegra_ehci_driver = {
        .probe          = tegra_ehci_probe,
        .remove         = tegra_ehci_remove,
        .shutdown       = tegra_ehci_hcd_shutdown,
        .driver         = {
                .name   = "tegra-ehci",
                .of_match_table = tegra_ehci_of_match,
#ifdef CONFIG_PM
                .pm     = &tegra_ehci_pm_ops,
#endif
        }
};