]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blob - drivers/usb/host/ohci-da8xx.c
KVM: arm64: vgic-v3: Log which GICv3 system registers are trapped
[mirror_ubuntu-zesty-kernel.git] / drivers / usb / host / ohci-da8xx.c
1 /*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * TI DA8xx (OMAP-L1x) Bus Glue
5 *
6 * Derived from: ohci-omap.c and ohci-s3c2410.c
7 * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
8 *
9 * This file is licensed under the terms of the GNU General Public License
10 * version 2. This program is licensed "as is" without any warranty of any
11 * kind, whether express or implied.
12 */
13
14 #include <linux/clk.h>
15 #include <linux/io.h>
16 #include <linux/interrupt.h>
17 #include <linux/jiffies.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/platform_device.h>
21 #include <linux/phy/phy.h>
22 #include <linux/platform_data/usb-davinci.h>
23 #include <linux/regulator/consumer.h>
24 #include <linux/usb.h>
25 #include <linux/usb/hcd.h>
26 #include <asm/unaligned.h>
27
28 #include "ohci.h"
29
30 #define DRIVER_DESC "DA8XX"
31 #define DRV_NAME "ohci-da8xx"
32
33 static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
34
35 static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq,
36 u16 wValue, u16 wIndex, char *buf, u16 wLength);
37 static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
38
39 struct da8xx_ohci_hcd {
40 struct usb_hcd *hcd;
41 struct clk *usb11_clk;
42 struct phy *usb11_phy;
43 struct regulator *vbus_reg;
44 struct notifier_block nb;
45 unsigned int reg_enabled;
46 };
47
48 #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
49
50 /* Over-current indicator change bitmask */
51 static volatile u16 ocic_mask;
52
53 static int ohci_da8xx_enable(struct usb_hcd *hcd)
54 {
55 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
56 int ret;
57
58 ret = clk_prepare_enable(da8xx_ohci->usb11_clk);
59 if (ret)
60 return ret;
61
62 ret = phy_init(da8xx_ohci->usb11_phy);
63 if (ret)
64 goto err_phy_init;
65
66 ret = phy_power_on(da8xx_ohci->usb11_phy);
67 if (ret)
68 goto err_phy_power_on;
69
70 return 0;
71
72 err_phy_power_on:
73 phy_exit(da8xx_ohci->usb11_phy);
74 err_phy_init:
75 clk_disable_unprepare(da8xx_ohci->usb11_clk);
76
77 return ret;
78 }
79
80 static void ohci_da8xx_disable(struct usb_hcd *hcd)
81 {
82 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
83
84 phy_power_off(da8xx_ohci->usb11_phy);
85 phy_exit(da8xx_ohci->usb11_phy);
86 clk_disable_unprepare(da8xx_ohci->usb11_clk);
87 }
88
89 static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
90 {
91 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
92 struct device *dev = hcd->self.controller;
93 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
94 int ret;
95
96 if (hub && hub->set_power)
97 return hub->set_power(1, on);
98
99 if (!da8xx_ohci->vbus_reg)
100 return 0;
101
102 if (on && !da8xx_ohci->reg_enabled) {
103 ret = regulator_enable(da8xx_ohci->vbus_reg);
104 if (ret) {
105 dev_err(dev, "Failed to enable regulator: %d\n", ret);
106 return ret;
107 }
108 da8xx_ohci->reg_enabled = 1;
109
110 } else if (!on && da8xx_ohci->reg_enabled) {
111 ret = regulator_disable(da8xx_ohci->vbus_reg);
112 if (ret) {
113 dev_err(dev, "Failed to disable regulator: %d\n", ret);
114 return ret;
115 }
116 da8xx_ohci->reg_enabled = 0;
117 }
118
119 return 0;
120 }
121
122 static int ohci_da8xx_get_power(struct usb_hcd *hcd)
123 {
124 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
125 struct device *dev = hcd->self.controller;
126 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
127
128 if (hub && hub->get_power)
129 return hub->get_power(1);
130
131 if (da8xx_ohci->vbus_reg)
132 return regulator_is_enabled(da8xx_ohci->vbus_reg);
133
134 return 1;
135 }
136
137 static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
138 {
139 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
140 struct device *dev = hcd->self.controller;
141 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
142 unsigned int flags;
143 int ret;
144
145 if (hub && hub->get_oci)
146 return hub->get_oci(1);
147
148 if (!da8xx_ohci->vbus_reg)
149 return 0;
150
151 ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
152 if (ret)
153 return ret;
154
155 if (flags & REGULATOR_ERROR_OVER_CURRENT)
156 return 1;
157
158 return 0;
159 }
160
161 static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
162 {
163 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
164 struct device *dev = hcd->self.controller;
165 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
166
167 if (hub && hub->set_power)
168 return 1;
169
170 if (da8xx_ohci->vbus_reg)
171 return 1;
172
173 return 0;
174 }
175
176 static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
177 {
178 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
179 struct device *dev = hcd->self.controller;
180 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
181
182 if (hub && hub->get_oci)
183 return 1;
184
185 if (da8xx_ohci->vbus_reg)
186 return 1;
187
188 return 0;
189 }
190
191 static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
192 {
193 struct device *dev = hcd->self.controller;
194 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
195
196 if (hub && hub->potpgt)
197 return 1;
198
199 return 0;
200 }
201
202 /*
203 * Handle the port over-current indicator change.
204 */
205 static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
206 unsigned port)
207 {
208 ocic_mask |= 1 << port;
209
210 /* Once over-current is detected, the port needs to be powered down */
211 if (hub->get_oci(port) > 0)
212 hub->set_power(port, 0);
213 }
214
215 static int ohci_da8xx_regulator_event(struct notifier_block *nb,
216 unsigned long event, void *data)
217 {
218 struct da8xx_ohci_hcd *da8xx_ohci =
219 container_of(nb, struct da8xx_ohci_hcd, nb);
220
221 if (event & REGULATOR_EVENT_OVER_CURRENT) {
222 ocic_mask |= 1 << 1;
223 ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
224 }
225
226 return 0;
227 }
228
229 static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
230 {
231 struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
232 struct device *dev = hcd->self.controller;
233 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
234 int ret = 0;
235
236 if (hub && hub->ocic_notify) {
237 ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
238 } else if (da8xx_ohci->vbus_reg) {
239 da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
240 ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
241 &da8xx_ohci->nb);
242 }
243
244 if (ret)
245 dev_err(dev, "Failed to register notifier: %d\n", ret);
246
247 return ret;
248 }
249
250 static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
251 {
252 struct device *dev = hcd->self.controller;
253 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
254
255 if (hub && hub->ocic_notify)
256 hub->ocic_notify(NULL);
257 }
258
259 static int ohci_da8xx_reset(struct usb_hcd *hcd)
260 {
261 struct device *dev = hcd->self.controller;
262 struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
263 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
264 int result;
265 u32 rh_a;
266
267 dev_dbg(dev, "starting USB controller\n");
268
269 result = ohci_da8xx_enable(hcd);
270 if (result < 0)
271 return result;
272
273 /*
274 * DA8xx only have 1 port connected to the pins but the HC root hub
275 * register A reports 2 ports, thus we'll have to override it...
276 */
277 ohci->num_ports = 1;
278
279 result = ohci_setup(hcd);
280 if (result < 0) {
281 ohci_da8xx_disable(hcd);
282 return result;
283 }
284
285 /*
286 * Since we're providing a board-specific root hub port power control
287 * and over-current reporting, we have to override the HC root hub A
288 * register's default value, so that ohci_hub_control() could return
289 * the correct hub descriptor...
290 */
291 rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
292 if (ohci_da8xx_has_set_power(hcd)) {
293 rh_a &= ~RH_A_NPS;
294 rh_a |= RH_A_PSM;
295 }
296 if (ohci_da8xx_has_oci(hcd)) {
297 rh_a &= ~RH_A_NOCP;
298 rh_a |= RH_A_OCPM;
299 }
300 if (ohci_da8xx_has_potpgt(hcd)) {
301 rh_a &= ~RH_A_POTPGT;
302 rh_a |= hub->potpgt << 24;
303 }
304 ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
305
306 return result;
307 }
308
309 /*
310 * Update the status data from the hub with the over-current indicator change.
311 */
312 static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
313 {
314 int length = orig_ohci_hub_status_data(hcd, buf);
315
316 /* See if we have OCIC bit set on port 1 */
317 if (ocic_mask & (1 << 1)) {
318 dev_dbg(hcd->self.controller, "over-current indicator change "
319 "on port 1\n");
320
321 if (!length)
322 length = 1;
323
324 buf[0] |= 1 << 1;
325 }
326 return length;
327 }
328
329 /*
330 * Look at the control requests to the root hub and see if we need to override.
331 */
332 static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
333 u16 wIndex, char *buf, u16 wLength)
334 {
335 struct device *dev = hcd->self.controller;
336 int temp;
337
338 switch (typeReq) {
339 case GetPortStatus:
340 /* Check the port number */
341 if (wIndex != 1)
342 break;
343
344 dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
345
346 temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
347
348 /* The port power status (PPS) bit defaults to 1 */
349 if (!ohci_da8xx_get_power(hcd))
350 temp &= ~RH_PS_PPS;
351
352 /* The port over-current indicator (POCI) bit is always 0 */
353 if (ohci_da8xx_get_oci(hcd) > 0)
354 temp |= RH_PS_POCI;
355
356 /* The over-current indicator change (OCIC) bit is 0 too */
357 if (ocic_mask & (1 << wIndex))
358 temp |= RH_PS_OCIC;
359
360 put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
361 return 0;
362 case SetPortFeature:
363 temp = 1;
364 goto check_port;
365 case ClearPortFeature:
366 temp = 0;
367
368 check_port:
369 /* Check the port number */
370 if (wIndex != 1)
371 break;
372
373 switch (wValue) {
374 case USB_PORT_FEAT_POWER:
375 dev_dbg(dev, "%sPortFeature(%u): %s\n",
376 temp ? "Set" : "Clear", wIndex, "POWER");
377
378 return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
379 case USB_PORT_FEAT_C_OVER_CURRENT:
380 dev_dbg(dev, "%sPortFeature(%u): %s\n",
381 temp ? "Set" : "Clear", wIndex,
382 "C_OVER_CURRENT");
383
384 if (temp)
385 ocic_mask |= 1 << wIndex;
386 else
387 ocic_mask &= ~(1 << wIndex);
388 return 0;
389 }
390 }
391
392 return orig_ohci_hub_control(hcd, typeReq, wValue,
393 wIndex, buf, wLength);
394 }
395
396 /*-------------------------------------------------------------------------*/
397 #ifdef CONFIG_OF
398 static const struct of_device_id da8xx_ohci_ids[] = {
399 { .compatible = "ti,da830-ohci" },
400 { }
401 };
402 MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
403 #endif
404
405 static int ohci_da8xx_probe(struct platform_device *pdev)
406 {
407 struct da8xx_ohci_hcd *da8xx_ohci;
408 struct usb_hcd *hcd;
409 struct resource *mem;
410 int error, irq;
411 hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
412 dev_name(&pdev->dev));
413 if (!hcd)
414 return -ENOMEM;
415
416 da8xx_ohci = to_da8xx_ohci(hcd);
417 da8xx_ohci->hcd = hcd;
418
419 da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11");
420 if (IS_ERR(da8xx_ohci->usb11_clk)) {
421 error = PTR_ERR(da8xx_ohci->usb11_clk);
422 if (error != -EPROBE_DEFER)
423 dev_err(&pdev->dev, "Failed to get clock.\n");
424 goto err;
425 }
426
427 da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
428 if (IS_ERR(da8xx_ohci->usb11_phy)) {
429 error = PTR_ERR(da8xx_ohci->usb11_phy);
430 if (error != -EPROBE_DEFER)
431 dev_err(&pdev->dev, "Failed to get phy.\n");
432 goto err;
433 }
434
435 da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus");
436 if (IS_ERR(da8xx_ohci->vbus_reg)) {
437 error = PTR_ERR(da8xx_ohci->vbus_reg);
438 if (error == -ENODEV) {
439 da8xx_ohci->vbus_reg = NULL;
440 } else if (error == -EPROBE_DEFER) {
441 goto err;
442 } else {
443 dev_err(&pdev->dev, "Failed to get regulator\n");
444 goto err;
445 }
446 }
447
448 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
449 hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
450 if (IS_ERR(hcd->regs)) {
451 error = PTR_ERR(hcd->regs);
452 goto err;
453 }
454 hcd->rsrc_start = mem->start;
455 hcd->rsrc_len = resource_size(mem);
456
457 irq = platform_get_irq(pdev, 0);
458 if (irq < 0) {
459 error = -ENODEV;
460 goto err;
461 }
462
463 error = usb_add_hcd(hcd, irq, 0);
464 if (error)
465 goto err;
466
467 device_wakeup_enable(hcd->self.controller);
468
469 error = ohci_da8xx_register_notify(hcd);
470 if (error)
471 goto err_remove_hcd;
472
473 return 0;
474
475 err_remove_hcd:
476 usb_remove_hcd(hcd);
477 err:
478 usb_put_hcd(hcd);
479 return error;
480 }
481
482 static int ohci_da8xx_remove(struct platform_device *pdev)
483 {
484 struct usb_hcd *hcd = platform_get_drvdata(pdev);
485
486 ohci_da8xx_unregister_notify(hcd);
487 usb_remove_hcd(hcd);
488 usb_put_hcd(hcd);
489
490 return 0;
491 }
492
493 #ifdef CONFIG_PM
494 static int ohci_da8xx_suspend(struct platform_device *pdev,
495 pm_message_t message)
496 {
497 struct usb_hcd *hcd = platform_get_drvdata(pdev);
498 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
499 bool do_wakeup = device_may_wakeup(&pdev->dev);
500 int ret;
501
502
503 if (time_before(jiffies, ohci->next_statechange))
504 msleep(5);
505 ohci->next_statechange = jiffies;
506
507 ret = ohci_suspend(hcd, do_wakeup);
508 if (ret)
509 return ret;
510
511 ohci_da8xx_disable(hcd);
512 hcd->state = HC_STATE_SUSPENDED;
513
514 return ret;
515 }
516
517 static int ohci_da8xx_resume(struct platform_device *dev)
518 {
519 struct usb_hcd *hcd = platform_get_drvdata(dev);
520 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
521 int ret;
522
523 if (time_before(jiffies, ohci->next_statechange))
524 msleep(5);
525 ohci->next_statechange = jiffies;
526
527 ret = ohci_da8xx_enable(hcd);
528 if (ret)
529 return ret;
530
531 ohci_resume(hcd, false);
532
533 return 0;
534 }
535 #endif
536
537 static const struct ohci_driver_overrides da8xx_overrides __initconst = {
538 .reset = ohci_da8xx_reset,
539 .extra_priv_size = sizeof(struct da8xx_ohci_hcd),
540 };
541
542 /*
543 * Driver definition to register with platform structure.
544 */
545 static struct platform_driver ohci_hcd_da8xx_driver = {
546 .probe = ohci_da8xx_probe,
547 .remove = ohci_da8xx_remove,
548 .shutdown = usb_hcd_platform_shutdown,
549 #ifdef CONFIG_PM
550 .suspend = ohci_da8xx_suspend,
551 .resume = ohci_da8xx_resume,
552 #endif
553 .driver = {
554 .name = DRV_NAME,
555 .of_match_table = of_match_ptr(da8xx_ohci_ids),
556 },
557 };
558
559 static int __init ohci_da8xx_init(void)
560 {
561
562 if (usb_disabled())
563 return -ENODEV;
564
565 pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
566 ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);
567
568 /*
569 * The Davinci da8xx HW has some unusual quirks, which require
570 * da8xx-specific workarounds. We override certain hc_driver
571 * functions here to achieve that. We explicitly do not enhance
572 * ohci_driver_overrides to allow this more easily, since this
573 * is an unusual case, and we don't want to encourage others to
574 * override these functions by making it too easy.
575 */
576
577 orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
578 orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;
579
580 ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data;
581 ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control;
582
583 return platform_driver_register(&ohci_hcd_da8xx_driver);
584 }
585 module_init(ohci_da8xx_init);
586
587 static void __exit ohci_da8xx_exit(void)
588 {
589 platform_driver_unregister(&ohci_hcd_da8xx_driver);
590 }
591 module_exit(ohci_da8xx_exit);
592 MODULE_DESCRIPTION(DRIVER_DESC);
593 MODULE_LICENSE("GPL");
594 MODULE_ALIAS("platform:" DRV_NAME);