drivers/usb/input/Kconfig

   1 #
   2 # USB Input driver configuration
   3 #
   4 comment "USB Input Devices"
   5         depends on USB
   6
   7 config USB_HID
   8         tristate "USB Human Interface Device (full HID) support"
   9         depends on USB
  10         ---help---
  11           Say Y here if you want full HID support to connect keyboards,
  12           mice, joysticks, graphic tablets, or any other HID based devices
  13           to your computer via USB. You also need to select HID Input layer
  14           support (below) if you want to use keyboards, mice, joysticks and
  15           the like ... as well as Uninterruptible Power Supply (UPS) and
  16           monitor control devices.
  17
  18           You can't use this driver and the HIDBP (Boot Protocol) keyboard
  19           and mouse drivers at the same time. More information is available:
  20           <file:Documentation/input/input.txt>.
  21
  22           If unsure, say Y.
  23
  24           To compile this driver as a module, choose M here: the
  25           module will be called usbhid.
  26
  27 comment "Input core support is needed for USB HID input layer or HIDBP support"
  28         depends on USB_HID && INPUT=n
  29
  30 config USB_HIDINPUT
  31         bool "HID input layer support"
  32         default y
  33         depends on INPUT && USB_HID
  34         help
  35           Say Y here if you want to use a USB keyboard, mouse or joystick,
  36           or any other HID input device.
  37
  38           If unsure, say Y.
  39
  40 config USB_HIDINPUT_POWERBOOK
  41         bool "Enable support for iBook/PowerBook special keys"
  42         default n
  43         depends on USB_HIDINPUT
  44         help
  45           Say Y here if you want support for the special keys (Fn, Numlock) on
  46           Apple iBooks and PowerBooks.
  47
  48           If unsure, say N.
  49
  50 config HID_FF
  51         bool "Force feedback support (EXPERIMENTAL)"
  52         depends on USB_HIDINPUT && EXPERIMENTAL
  53         help
  54           Say Y here is you want force feedback support for a few HID devices.
  55           See below for a list of supported devices.
  56
  57           See <file:Documentation/input/ff.txt> for a description of the force
  58           feedback API.
  59
  60           If unsure, say N.
  61
  62 config HID_PID
  63         bool "PID device support"
  64         depends on HID_FF
  65         help
  66           Say Y here if you have a PID-compliant device and wish to enable force
  67           feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such
  68           devices.
  69
  70 config LOGITECH_FF
  71         bool "Logitech WingMan *3D support"
  72         depends on HID_FF
  73         select INPUT_FF_MEMLESS if USB_HID
  74         help
  75           Say Y here if you have one of these devices:
  76           - Logitech WingMan Cordless RumblePad
  77           - Logitech WingMan Force 3D
  78           and if you want to enable force feedback for them.
  79           Note: if you say N here, this device will still be supported, but without
  80           force feedback.
  81
  82 config THRUSTMASTER_FF
  83         bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
  84         depends on HID_FF && EXPERIMENTAL
  85         select INPUT_FF_MEMLESS if USB_HID
  86         help
  87           Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
  88           and want to enable force feedback support for it.
  89           Note: if you say N here, this device will still be supported, but without
  90           force feedback.
  91
  92 config ZEROPLUS_FF
  93         bool "Zeroplus based game controller support"
  94         depends on HID_FF
  95         select INPUT_FF_MEMLESS if USB_HID
  96         help
  97           Say Y here if you have a Zeroplus based game controller and want to
  98           enable force feedback for it.
  99
 100 config USB_HIDDEV
 101         bool "/dev/hiddev raw HID device support"
 102         depends on USB_HID
 103         help
 104           Say Y here if you want to support HID devices (from the USB
 105           specification standpoint) that aren't strictly user interface
 106           devices, like monitor controls and Uninterruptable Power Supplies.
 107
 108           This module supports these devices separately using a separate
 109           event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
 110
 111           If unsure, say Y.
 112
 113 menu "USB HID Boot Protocol drivers"
 114         depends on USB!=n && USB_HID!=y
 115
 116 config USB_KBD
 117         tristate "USB HIDBP Keyboard (simple Boot) support"
 118         depends on USB && INPUT
 119         ---help---
 120           Say Y here only if you are absolutely sure that you don't want
 121           to use the generic HID driver for your USB keyboard and prefer
 122           to use the keyboard in its limited Boot Protocol mode instead.
 123
 124           This is almost certainly not what you want.  This is mostly
 125           useful for embedded applications or simple keyboards.
 126
 127           To compile this driver as a module, choose M here: the
 128           module will be called usbkbd.
 129
 130           If even remotely unsure, say N.
 131
 132 config USB_MOUSE
 133         tristate "USB HIDBP Mouse (simple Boot) support"
 134         depends on USB && INPUT
 135         ---help---
 136           Say Y here only if you are absolutely sure that you don't want
 137           to use the generic HID driver for your USB mouse and prefer
 138           to use the mouse in its limited Boot Protocol mode instead.
 139
 140           This is almost certainly not what you want.  This is mostly
 141           useful for embedded applications or simple mice.
 142
 143           To compile this driver as a module, choose M here: the
 144           module will be called usbmouse.
 145
 146           If even remotely unsure, say N.
 147
 148 endmenu
 149
 150 config USB_AIPTEK
 151         tristate "Aiptek 6000U/8000U tablet support"
 152         depends on USB && INPUT
 153         help
 154           Say Y here if you want to use the USB version of the Aiptek 6000U
 155           or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
 156           (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
 157           (CONFIG_INPUT_EVDEV) as well.
 158
 159           To compile this driver as a module, choose M here: the
 160           module will be called aiptek.
 161
 162 config USB_WACOM
 163         tristate "Wacom Intuos/Graphire tablet support"
 164         depends on USB && INPUT
 165         help
 166           Say Y here if you want to use the USB version of the Wacom Intuos
 167           or Graphire tablet.  Make sure to say Y to "Mouse support"
 168           (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
 169           (CONFIG_INPUT_EVDEV) as well.
 170
 171           To compile this driver as a module, choose M here: the
 172           module will be called wacom.
 173
 174 config USB_ACECAD
 175         tristate "Acecad Flair tablet support"
 176         depends on USB && INPUT
 177         help
 178           Say Y here if you want to use the USB version of the Acecad Flair
 179           tablet.  Make sure to say Y to "Mouse support"
 180           (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
 181           (CONFIG_INPUT_EVDEV) as well.
 182
 183           To compile this driver as a module, choose M here: the
 184           module will be called acecad.
 185
 186 config USB_KBTAB
 187         tristate "KB Gear JamStudio tablet support"
 188         depends on USB && INPUT
 189         help
 190           Say Y here if you want to use the USB version of the KB Gear
 191           JamStudio tablet.  Make sure to say Y to "Mouse support"
 192           (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
 193           (CONFIG_INPUT_EVDEV) as well.
 194
 195           To compile this driver as a module, choose M here: the
 196           module will be called kbtab.
 197
 198 config USB_POWERMATE
 199         tristate "Griffin PowerMate and Contour Jog support"
 200         depends on USB && INPUT
 201         ---help---
 202           Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
 203           These are aluminum dials which can measure clockwise and anticlockwise
 204           rotation.  The dial also acts as a pushbutton.  The base contains an LED
 205           which can be instructed to pulse or to switch to a particular intensity.
 206
 207           You can download userspace tools from
 208           <http://sowerbutts.com/powermate/>.
 209
 210           To compile this driver as a module, choose M here: the
 211           module will be called powermate.
 212
 213 config USB_TOUCHSCREEN
 214         tristate "USB Touchscreen Driver"
 215         depends on USB && INPUT
 216         ---help---
 217           USB Touchscreen driver for:
 218           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 219           - PanJit TouchSet USB
 220           - 3M MicroTouch USB (EX II series)
 221           - ITM
 222           - some other eTurboTouch
 223           - Gunze AHL61
 224
 225           Have a look at <http://linux.chapter7.ch/touchkit/> for
 226           a usage description and the required user-space stuff.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called usbtouchscreen.
 230
 231 config USB_TOUCHSCREEN_EGALAX
 232         default y
 233         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
 234         depends on USB_TOUCHSCREEN
 235
 236 config USB_TOUCHSCREEN_PANJIT
 237         default y
 238         bool "PanJit device support" if EMBEDDED
 239         depends on USB_TOUCHSCREEN
 240
 241 config USB_TOUCHSCREEN_3M
 242         default y
 243         bool "3M/Microtouch EX II series device support" if EMBEDDED
 244         depends on USB_TOUCHSCREEN
 245
 246 config USB_TOUCHSCREEN_ITM
 247         default y
 248         bool "ITM device support" if EMBEDDED
 249         depends on USB_TOUCHSCREEN
 250
 251 config USB_TOUCHSCREEN_ETURBO
 252         default y
 253         bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
 254         depends on USB_TOUCHSCREEN
 255
 256 config USB_TOUCHSCREEN_GUNZE
 257         default y
 258         bool "Gunze AHL61 device support" if EMBEDDED
 259         depends on USB_TOUCHSCREEN
 260
 261 config USB_YEALINK
 262         tristate "Yealink usb-p1k voip phone"
 263         depends on USB && INPUT && EXPERIMENTAL
 264         ---help---
 265           Say Y here if you want to enable keyboard and LCD functions of the
 266           Yealink usb-p1k usb phones. The audio part is enabled by the generic
 267           usb sound driver, so you might want to enable that as well.
 268
 269           For information about how to use these additional functions, see
 270           <file:Documentation/input/yealink.txt>.
 271
 272           To compile this driver as a module, choose M here: the module will be
 273           called yealink.
 274
 275 config USB_XPAD
 276         tristate "X-Box gamepad support"
 277         depends on USB && INPUT
 278         ---help---
 279           Say Y here if you want to use the X-Box pad with your computer.
 280           Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
 281           and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.
 282
 283           For information about how to connect the X-Box pad to USB, see
 284           <file:Documentation/input/xpad.txt>.
 285
 286           To compile this driver as a module, choose M here: the
 287           module will be called xpad.
 288
 289 config USB_ATI_REMOTE
 290         tristate "ATI / X10 USB RF remote control"
 291         depends on USB && INPUT
 292         ---help---
 293           Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
 294           These are RF remotes with USB receivers.
 295           The ATI remote comes with many of ATI's All-In-Wonder video cards.
 296           The X10 "Lola" remote is available at:
 297              <http://www.x10.com/products/lola_sg1.htm>
 298           This driver provides mouse pointer, left and right mouse buttons,
 299           and maps all the other remote buttons to keypress events.
 300
 301           To compile this driver as a module, choose M here: the module will be
 302           called ati_remote.
 303
 304 config USB_ATI_REMOTE2
 305         tristate "ATI / Philips USB RF remote control"
 306         depends on USB && INPUT
 307         ---help---
 308           Say Y here if you want to use an ATI or Philips USB RF remote control.
 309           These are RF remotes with USB receivers.
 310           ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
 311           and is also available as a separate product.
 312           This driver provides mouse pointer, left and right mouse buttons,
 313           and maps all the other remote buttons to keypress events.
 314
 315           To compile this driver as a module, choose M here: the module will be
 316           called ati_remote2.
 317
 318 config USB_KEYSPAN_REMOTE
 319         tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
 320         depends on USB && INPUT && EXPERIMENTAL
 321         ---help---
 322           Say Y here if you want to use a Keyspan DMR USB remote control.
 323           Currently only the UIA-11 type of receiver has been tested.  The tag
 324           on the receiver that connects to the USB port should have a P/N that
 325           will tell you what type of DMR you have.  The UIA-10 type is not
 326           supported at this time.  This driver maps all buttons to keypress
 327           events.
 328
 329           To compile this driver as a module, choose M here: the module will
 330           be called keyspan_remote.
 331
 332 config USB_APPLETOUCH
 333         tristate "Apple USB Touchpad support"
 334         depends on USB && INPUT
 335         ---help---
 336           Say Y here if you want to use an Apple USB Touchpad.
 337
 338           These are the touchpads that can be found on post-February 2005
 339           Apple Powerbooks (prior models have a Synaptics touchpad connected
 340           to the ADB bus).
 341
 342           This driver provides a basic mouse driver but can be interfaced
 343           with the synaptics X11 driver to provide acceleration and
 344           scrolling in X11.
 345
 346           For further information, see
 347           <file:Documentation/input/appletouch.txt>.
 348
 349           To compile this driver as a module, choose M here: the
 350           module will be called appletouch.
 351
 352 config USB_TRANCEVIBRATOR
 353         tristate "PlayStation 2 Trance Vibrator driver support"
 354         depends on USB
 355         help
 356           Say Y here if you want to connect a PlayStation 2 Trance Vibrator
 357           device to your computer's USB port.
 358
 359           To compile this driver as a module, choose M here: the
 360           module will be called trancevibrator.