drivers/usb/media/Kconfig

   1 #
   2 # USB Multimedia device configuration
   3 #
   4 comment "USB Multimedia devices"
   5         depends on USB
   6
   7 config USB_DABUSB
   8         tristate "DABUSB driver"
   9         depends on USB
  10         ---help---
  11           A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
  12           brought to you by the DAB-Team
  13           <http://wwwbode.cs.tum.edu/Par/arch/dab/>.  This driver can be taken
  14           as an example for URB-based bulk, control, and isochronous
  15           transactions. URB's are explained in
  16           <file:Documentation/usb/URB.txt>.
  17
  18           To compile this driver as a module, choose M here: the
  19           module will be called dabusb.
  20
  21 comment "Video4Linux support is needed for USB Multimedia device support"
  22         depends on USB && VIDEO_DEV=n
  23
  24 config USB_VICAM
  25         tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
  26         depends on USB && VIDEO_DEV && EXPERIMENTAL
  27         ---help---
  28           Say Y here if you have 3com homeconnect camera (vicam).
  29
  30           This driver uses the Video For Linux API. You must say Y or M to
  31           "Video For Linux" (under Multimedia Devices) to use this driver.
  32           Information on this API and pointers to "v4l" programs may be found
  33           at <file:Documentation/video4linux/API.html>.
  34
  35           To compile this driver as a module, choose M here: the
  36           module will be called vicam.
  37
  38 config USB_DSBR
  39         tristate "D-Link USB FM radio support (EXPERIMENTAL)"
  40         depends on USB && VIDEO_DEV && EXPERIMENTAL
  41         ---help---
  42           Say Y here if you want to connect this type of radio to your
  43           computer's USB port. Note that the audio is not digital, and
  44           you must connect the line out connector to a sound card or a
  45           set of speakers.
  46
  47           This driver uses the Video For Linux API.  You must enable
  48           (Y or M in config) Video For Linux (under Character Devices)
  49           to use this driver.  Information on this API and pointers to
  50           "v4l" programs may be found at
  51           <file:Documentation/video4linux/API.html>.
  52
  53           To compile this driver as a module, choose M here: the
  54           module will be called dsbr100.
  55
  56 config USB_IBMCAM
  57         tristate "USB IBM (Xirlink) C-it Camera support"
  58         depends on USB && VIDEO_DEV
  59         ---help---
  60           Say Y here if you want to connect a IBM "C-It" camera, also known as
  61           "Xirlink PC Camera" to your computer's USB port.  For more
  62           information, read <file:Documentation/usb/ibmcam.txt>.
  63
  64           This driver uses the Video For Linux API.  You must enable
  65           (Y or M in config) Video For Linux (under Character Devices)
  66           to use this driver.  Information on this API and pointers to
  67           "v4l" programs may be found at
  68           <file:Documentation/video4linux/API.html>.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ibmcam.
  72
  73           This camera has several configuration options which
  74           can be specified when you load the module. Read
  75           <file:Documentation/usb/ibmcam.txt> to learn more.
  76
  77 config USB_KONICAWC
  78         tristate "USB Konica Webcam support"
  79         depends on USB && VIDEO_DEV
  80         ---help---
  81           Say Y here if you want support for webcams based on a Konica
  82           chipset. This is known to work with the Intel YC76 webcam.
  83
  84           This driver uses the Video For Linux API.  You must enable
  85           (Y or M in config) Video For Linux (under Character Devices)
  86           to use this driver.  Information on this API and pointers to
  87           "v4l" programs may be found at
  88           <file:Documentation/video4linux/API.html>.
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called konicawc.
  92
  93 config USB_OV511
  94         tristate "USB OV511 Camera support"
  95         depends on USB && VIDEO_DEV
  96         ---help---
  97           Say Y here if you want to connect this type of camera to your
  98           computer's USB port. See <file:Documentation/usb/ov511.txt> for more
  99           information and for a list of supported cameras.
 100
 101           This driver uses the Video For Linux API. You must say Y or M to
 102           "Video For Linux" (under Character Devices) to use this driver.
 103           Information on this API and pointers to "v4l" programs may be found
 104           at <file:Documentation/video4linux/API.html>.
 105
 106           To compile this driver as a module, choose M here: the
 107           module will be called ov511.
 108
 109 config USB_SE401
 110         tristate "USB SE401 Camera support"
 111         depends on USB && VIDEO_DEV
 112         ---help---
 113           Say Y here if you want to connect this type of camera to your
 114           computer's USB port. See <file:Documentation/usb/se401.txt> for more
 115           information and for a list of supported cameras.
 116
 117           This driver uses the Video For Linux API. You must say Y or M to
 118           "Video For Linux" (under Multimedia Devices) to use this driver.
 119           Information on this API and pointers to "v4l" programs may be found
 120           at <file:Documentation/video4linux/API.html>.
 121
 122           To compile this driver as a module, choose M here: the
 123           module will be called se401.
 124
 125 config USB_SN9C102
 126         tristate "USB SN9C10x PC Camera Controller support"
 127         depends on USB && VIDEO_DEV
 128         ---help---
 129           Say Y here if you want support for cameras based on SONiX SN9C101,
 130           SN9C102 or SN9C103 PC Camera Controllers.
 131
 132           See <file:Documentation/usb/sn9c102.txt> for more informations.
 133
 134           This driver uses the Video For Linux API. You must say Y or M to
 135           "Video For Linux" to use this driver.
 136
 137           To compile this driver as a module, choose M here: the
 138           module will be called sn9c102.
 139
 140 config USB_STV680
 141         tristate "USB STV680 (Pencam) Camera support"
 142         depends on USB && VIDEO_DEV
 143         ---help---
 144           Say Y here if you want to connect this type of camera to your
 145           computer's USB port. This includes the Pencam line of cameras.
 146           See <file:Documentation/usb/stv680.txt> for more information and for
 147           a list of supported cameras.
 148
 149           This driver uses the Video For Linux API. You must say Y or M to
 150           "Video For Linux" (under Multimedia Devices) to use this driver.
 151           Information on this API and pointers to "v4l" programs may be found
 152           at <file:Documentation/video4linux/API.html>.
 153
 154           To compile this driver as a module, choose M here: the
 155           module will be called stv680.
 156
 157 config USB_W9968CF
 158         tristate "USB W996[87]CF JPEG Dual Mode Camera support"
 159         depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP
 160         ---help---
 161           Say Y here if you want support for cameras based on OV681 or
 162           Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
 163
 164           This driver has an optional plugin, which is distributed as a
 165           separate module only (released under GPL). It allows to use higher
 166           resolutions and framerates, but cannot be included in the official
 167           Linux kernel for performance purposes.
 168
 169           See <file:Documentation/usb/w9968cf.txt> for more informations.
 170
 171           This driver uses the Video For Linux and the I2C APIs. It needs the
 172           OmniVision Camera Chip support as well. You must say Y or M to
 173           "Video For Linux", "I2C Support" and "OmniVision Camera Chip
 174           support" to use this driver.
 175
 176           To compile this driver as a module, choose M here: the
 177           module will be called w9968cf.
 178
 179 config USB_PWC
 180         tristate "USB Philips Cameras"
 181         depends on USB && VIDEO_DEV
 182         ---help---
 183           Say Y or M here if you want to use one of these Philips & OEM
 184           webcams:
 185            * Philips PCA645, PCA646
 186            * Philips PCVC675, PCVC680, PCVC690
 187            * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
 188            * Askey VC010
 189            * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
 190              and 'Orbit'/'Sphere'
 191            * Samsung MPC-C10, MPC-C30
 192            * Creative Webcam 5, Pro Ex
 193            * SOTEC Afina Eye
 194            * Visionite VCS-UC300, VCS-UM100
 195
 196           The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
 197           and never will be, but the 665 and 720/20 are supported by other
 198           drivers.
 199
 200           See <file:Documentation/usb/philips.txt> for more information and
 201           installation instructions.
 202
 203           The built-in microphone is enabled by selecting USB Audio support.
 204
 205           This driver uses the Video For Linux API. You must say Y or M to
 206           "Video For Linux" (under Character Devices) to use this driver.
 207           Information on this API and pointers to "v4l" programs may be found
 208           at <file:Documentation/video4linux/API.html>.
 209
 210           To compile this driver as a module, choose M here: the
 211           module will be called pwc.
 212
 213