1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/kernel.h>
3 #include <linux/errno.h>
4 #include <linux/init.h>
5 #include <linux/slab.h>
7 #include <linux/module.h>
8 #include <linux/moduleparam.h>
9 #include <linux/scatterlist.h>
10 #include <linux/mutex.h>
11 #include <linux/timer.h>
12 #include <linux/usb.h>
14 #define SIMPLE_IO_TIMEOUT 10000 /* in milliseconds */
16 /*-------------------------------------------------------------------------*/
18 static int override_alt
= -1;
19 module_param_named(alt
, override_alt
, int, 0644);
20 MODULE_PARM_DESC(alt
, ">= 0 to override altsetting selection");
21 static void complicated_callback(struct urb
*urb
);
23 /*-------------------------------------------------------------------------*/
25 /* FIXME make these public somewhere; usbdevfs.h? */
27 /* Parameter for usbtest driver. */
28 struct usbtest_param_32
{
30 __u32 test_num
; /* 0..(TEST_CASES-1) */
42 * Compat parameter to the usbtest driver.
43 * This supports older user space binaries compiled with 64 bit compiler.
45 struct usbtest_param_64
{
47 __u32 test_num
; /* 0..(TEST_CASES-1) */
58 /* IOCTL interface to the driver. */
59 #define USBTEST_REQUEST_32 _IOWR('U', 100, struct usbtest_param_32)
60 /* COMPAT IOCTL interface to the driver. */
61 #define USBTEST_REQUEST_64 _IOWR('U', 100, struct usbtest_param_64)
63 /*-------------------------------------------------------------------------*/
65 #define GENERIC /* let probe() bind using module params */
67 /* Some devices that can be used for testing will have "real" drivers.
68 * Entries for those need to be enabled here by hand, after disabling
71 //#define IBOT2 /* grab iBOT2 webcams */
72 //#define KEYSPAN_19Qi /* grab un-renumerated serial adapter */
74 /*-------------------------------------------------------------------------*/
78 u8 ep_in
; /* bulk/intr source */
79 u8 ep_out
; /* bulk/intr sink */
82 unsigned iso
:1; /* try iso in/out */
83 unsigned intr
:1; /* try interrupt in/out */
87 /* this is accessed only through usbfs ioctl calls.
88 * one ioctl to issue a test ... one lock per device.
89 * tests create other threads if they need them.
90 * urbs and buffers are allocated dynamically,
91 * and data generated deterministically.
94 struct usb_interface
*intf
;
95 struct usbtest_info
*info
;
102 struct usb_endpoint_descriptor
*iso_in
, *iso_out
;
103 struct usb_endpoint_descriptor
*int_in
, *int_out
;
106 #define TBUF_SIZE 256
110 static struct usb_device
*testdev_to_usbdev(struct usbtest_dev
*test
)
112 return interface_to_usbdev(test
->intf
);
115 /* set up all urbs so they can be used with either bulk or interrupt */
116 #define INTERRUPT_RATE 1 /* msec/transfer */
118 #define ERROR(tdev, fmt, args...) \
119 dev_err(&(tdev)->intf->dev , fmt , ## args)
120 #define WARNING(tdev, fmt, args...) \
121 dev_warn(&(tdev)->intf->dev , fmt , ## args)
123 #define GUARD_BYTE 0xA5
124 #define MAX_SGLEN 128
126 /*-------------------------------------------------------------------------*/
128 static inline void endpoint_update(int edi
,
129 struct usb_host_endpoint
**in
,
130 struct usb_host_endpoint
**out
,
131 struct usb_host_endpoint
*e
)
143 get_endpoints(struct usbtest_dev
*dev
, struct usb_interface
*intf
)
146 struct usb_host_interface
*alt
;
147 struct usb_host_endpoint
*in
, *out
;
148 struct usb_host_endpoint
*iso_in
, *iso_out
;
149 struct usb_host_endpoint
*int_in
, *int_out
;
150 struct usb_device
*udev
;
152 for (tmp
= 0; tmp
< intf
->num_altsetting
; tmp
++) {
156 iso_in
= iso_out
= NULL
;
157 int_in
= int_out
= NULL
;
158 alt
= intf
->altsetting
+ tmp
;
160 if (override_alt
>= 0 &&
161 override_alt
!= alt
->desc
.bAlternateSetting
)
164 /* take the first altsetting with in-bulk + out-bulk;
165 * ignore other endpoints and altsettings.
167 for (ep
= 0; ep
< alt
->desc
.bNumEndpoints
; ep
++) {
168 struct usb_host_endpoint
*e
;
171 e
= alt
->endpoint
+ ep
;
172 edi
= usb_endpoint_dir_in(&e
->desc
);
174 switch (usb_endpoint_type(&e
->desc
)) {
175 case USB_ENDPOINT_XFER_BULK
:
176 endpoint_update(edi
, &in
, &out
, e
);
178 case USB_ENDPOINT_XFER_INT
:
180 endpoint_update(edi
, &int_in
, &int_out
, e
);
182 case USB_ENDPOINT_XFER_ISOC
:
184 endpoint_update(edi
, &iso_in
, &iso_out
, e
);
190 if ((in
&& out
) || iso_in
|| iso_out
|| int_in
|| int_out
)
196 udev
= testdev_to_usbdev(dev
);
197 dev
->info
->alt
= alt
->desc
.bAlternateSetting
;
198 if (alt
->desc
.bAlternateSetting
!= 0) {
199 tmp
= usb_set_interface(udev
,
200 alt
->desc
.bInterfaceNumber
,
201 alt
->desc
.bAlternateSetting
);
207 dev
->in_pipe
= usb_rcvbulkpipe(udev
,
208 in
->desc
.bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK
);
210 dev
->out_pipe
= usb_sndbulkpipe(udev
,
211 out
->desc
.bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK
);
214 dev
->iso_in
= &iso_in
->desc
;
215 dev
->in_iso_pipe
= usb_rcvisocpipe(udev
,
216 iso_in
->desc
.bEndpointAddress
217 & USB_ENDPOINT_NUMBER_MASK
);
221 dev
->iso_out
= &iso_out
->desc
;
222 dev
->out_iso_pipe
= usb_sndisocpipe(udev
,
223 iso_out
->desc
.bEndpointAddress
224 & USB_ENDPOINT_NUMBER_MASK
);
228 dev
->int_in
= &int_in
->desc
;
229 dev
->in_int_pipe
= usb_rcvintpipe(udev
,
230 int_in
->desc
.bEndpointAddress
231 & USB_ENDPOINT_NUMBER_MASK
);
235 dev
->int_out
= &int_out
->desc
;
236 dev
->out_int_pipe
= usb_sndintpipe(udev
,
237 int_out
->desc
.bEndpointAddress
238 & USB_ENDPOINT_NUMBER_MASK
);
243 /*-------------------------------------------------------------------------*/
245 /* Support for testing basic non-queued I/O streams.
247 * These just package urbs as requests that can be easily canceled.
248 * Each urb's data buffer is dynamically allocated; callers can fill
249 * them with non-zero test data (or test for it) when appropriate.
252 static void simple_callback(struct urb
*urb
)
254 complete(urb
->context
);
257 static struct urb
*usbtest_alloc_urb(
258 struct usb_device
*udev
,
261 unsigned transfer_flags
,
264 usb_complete_t complete_fn
)
268 urb
= usb_alloc_urb(0, GFP_KERNEL
);
273 usb_fill_int_urb(urb
, udev
, pipe
, NULL
, bytes
, complete_fn
,
276 usb_fill_bulk_urb(urb
, udev
, pipe
, NULL
, bytes
, complete_fn
,
279 urb
->interval
= (udev
->speed
== USB_SPEED_HIGH
)
280 ? (INTERRUPT_RATE
<< 3)
282 urb
->transfer_flags
= transfer_flags
;
283 if (usb_pipein(pipe
))
284 urb
->transfer_flags
|= URB_SHORT_NOT_OK
;
286 if ((bytes
+ offset
) == 0)
289 if (urb
->transfer_flags
& URB_NO_TRANSFER_DMA_MAP
)
290 urb
->transfer_buffer
= usb_alloc_coherent(udev
, bytes
+ offset
,
291 GFP_KERNEL
, &urb
->transfer_dma
);
293 urb
->transfer_buffer
= kmalloc(bytes
+ offset
, GFP_KERNEL
);
295 if (!urb
->transfer_buffer
) {
300 /* To test unaligned transfers add an offset and fill the
301 unused memory with a guard value */
303 memset(urb
->transfer_buffer
, GUARD_BYTE
, offset
);
304 urb
->transfer_buffer
+= offset
;
305 if (urb
->transfer_flags
& URB_NO_TRANSFER_DMA_MAP
)
306 urb
->transfer_dma
+= offset
;
309 /* For inbound transfers use guard byte so that test fails if
310 data not correctly copied */
311 memset(urb
->transfer_buffer
,
312 usb_pipein(urb
->pipe
) ? GUARD_BYTE
: 0,
317 static struct urb
*simple_alloc_urb(
318 struct usb_device
*udev
,
323 return usbtest_alloc_urb(udev
, pipe
, bytes
, URB_NO_TRANSFER_DMA_MAP
, 0,
324 bInterval
, simple_callback
);
327 static struct urb
*complicated_alloc_urb(
328 struct usb_device
*udev
,
333 return usbtest_alloc_urb(udev
, pipe
, bytes
, URB_NO_TRANSFER_DMA_MAP
, 0,
334 bInterval
, complicated_callback
);
337 static unsigned pattern
;
338 static unsigned mod_pattern
;
339 module_param_named(pattern
, mod_pattern
, uint
, S_IRUGO
| S_IWUSR
);
340 MODULE_PARM_DESC(mod_pattern
, "i/o pattern (0 == zeroes)");
342 static unsigned get_maxpacket(struct usb_device
*udev
, int pipe
)
344 struct usb_host_endpoint
*ep
;
346 ep
= usb_pipe_endpoint(udev
, pipe
);
347 return le16_to_cpup(&ep
->desc
.wMaxPacketSize
);
350 static void simple_fill_buf(struct urb
*urb
)
353 u8
*buf
= urb
->transfer_buffer
;
354 unsigned len
= urb
->transfer_buffer_length
;
364 maxpacket
= get_maxpacket(urb
->dev
, urb
->pipe
);
365 for (i
= 0; i
< len
; i
++)
366 *buf
++ = (u8
) ((i
% maxpacket
) % 63);
371 static inline unsigned long buffer_offset(void *buf
)
373 return (unsigned long)buf
& (ARCH_KMALLOC_MINALIGN
- 1);
376 static int check_guard_bytes(struct usbtest_dev
*tdev
, struct urb
*urb
)
378 u8
*buf
= urb
->transfer_buffer
;
379 u8
*guard
= buf
- buffer_offset(buf
);
382 for (i
= 0; guard
< buf
; i
++, guard
++) {
383 if (*guard
!= GUARD_BYTE
) {
384 ERROR(tdev
, "guard byte[%d] %d (not %d)\n",
385 i
, *guard
, GUARD_BYTE
);
392 static int simple_check_buf(struct usbtest_dev
*tdev
, struct urb
*urb
)
396 u8
*buf
= urb
->transfer_buffer
;
397 unsigned len
= urb
->actual_length
;
398 unsigned maxpacket
= get_maxpacket(urb
->dev
, urb
->pipe
);
400 int ret
= check_guard_bytes(tdev
, urb
);
404 for (i
= 0; i
< len
; i
++, buf
++) {
406 /* all-zeroes has no synchronization issues */
410 /* mod63 stays in sync with short-terminated transfers,
411 * or otherwise when host and gadget agree on how large
412 * each usb transfer request should be. resync is done
413 * with set_interface or set_config.
416 expected
= (i
% maxpacket
) % 63;
418 /* always fail unsupported patterns */
423 if (*buf
== expected
)
425 ERROR(tdev
, "buf[%d] = %d (not %d)\n", i
, *buf
, expected
);
431 static void simple_free_urb(struct urb
*urb
)
433 unsigned long offset
= buffer_offset(urb
->transfer_buffer
);
435 if (urb
->transfer_flags
& URB_NO_TRANSFER_DMA_MAP
)
438 urb
->transfer_buffer_length
+ offset
,
439 urb
->transfer_buffer
- offset
,
440 urb
->transfer_dma
- offset
);
442 kfree(urb
->transfer_buffer
- offset
);
446 static int simple_io(
447 struct usbtest_dev
*tdev
,
455 struct usb_device
*udev
= urb
->dev
;
456 int max
= urb
->transfer_buffer_length
;
457 struct completion completion
;
459 unsigned long expire
;
461 urb
->context
= &completion
;
462 while (retval
== 0 && iterations
-- > 0) {
463 init_completion(&completion
);
464 if (usb_pipeout(urb
->pipe
)) {
465 simple_fill_buf(urb
);
466 urb
->transfer_flags
|= URB_ZERO_PACKET
;
468 retval
= usb_submit_urb(urb
, GFP_KERNEL
);
472 expire
= msecs_to_jiffies(SIMPLE_IO_TIMEOUT
);
473 if (!wait_for_completion_timeout(&completion
, expire
)) {
475 retval
= (urb
->status
== -ENOENT
?
476 -ETIMEDOUT
: urb
->status
);
478 retval
= urb
->status
;
482 if (retval
== 0 && usb_pipein(urb
->pipe
))
483 retval
= simple_check_buf(tdev
, urb
);
486 int len
= urb
->transfer_buffer_length
;
491 len
= (vary
< max
) ? vary
: max
;
492 urb
->transfer_buffer_length
= len
;
495 /* FIXME if endpoint halted, clear halt (and log) */
497 urb
->transfer_buffer_length
= max
;
499 if (expected
!= retval
)
501 "%s failed, iterations left %d, status %d (not %d)\n",
502 label
, iterations
, retval
, expected
);
507 /*-------------------------------------------------------------------------*/
509 /* We use scatterlist primitives to test queued I/O.
510 * Yes, this also tests the scatterlist primitives.
513 static void free_sglist(struct scatterlist
*sg
, int nents
)
519 for (i
= 0; i
< nents
; i
++) {
520 if (!sg_page(&sg
[i
]))
522 kfree(sg_virt(&sg
[i
]));
527 static struct scatterlist
*
528 alloc_sglist(int nents
, int max
, int vary
, struct usbtest_dev
*dev
, int pipe
)
530 struct scatterlist
*sg
;
531 unsigned int n_size
= 0;
535 get_maxpacket(interface_to_usbdev(dev
->intf
), pipe
);
540 sg
= kmalloc_array(nents
, sizeof(*sg
), GFP_KERNEL
);
543 sg_init_table(sg
, nents
);
545 for (i
= 0; i
< nents
; i
++) {
549 buf
= kzalloc(size
, GFP_KERNEL
);
555 /* kmalloc pages are always physically contiguous! */
556 sg_set_buf(&sg
[i
], buf
, size
);
563 for (j
= 0; j
< size
; j
++)
564 *buf
++ = (u8
) (((j
+ n_size
) % maxpacket
) % 63);
573 size
= (vary
< max
) ? vary
: max
;
580 static void sg_timeout(unsigned long _req
)
582 struct usb_sg_request
*req
= (struct usb_sg_request
*) _req
;
587 static int perform_sglist(
588 struct usbtest_dev
*tdev
,
591 struct usb_sg_request
*req
,
592 struct scatterlist
*sg
,
596 struct usb_device
*udev
= testdev_to_usbdev(tdev
);
598 struct timer_list sg_timer
;
600 setup_timer_on_stack(&sg_timer
, sg_timeout
, (unsigned long) req
);
602 while (retval
== 0 && iterations
-- > 0) {
603 retval
= usb_sg_init(req
, udev
, pipe
,
604 (udev
->speed
== USB_SPEED_HIGH
)
605 ? (INTERRUPT_RATE
<< 3)
607 sg
, nents
, 0, GFP_KERNEL
);
611 mod_timer(&sg_timer
, jiffies
+
612 msecs_to_jiffies(SIMPLE_IO_TIMEOUT
));
614 if (!del_timer_sync(&sg_timer
))
617 retval
= req
->status
;
619 /* FIXME check resulting data pattern */
621 /* FIXME if endpoint halted, clear halt (and log) */
624 /* FIXME for unlink or fault handling tests, don't report
625 * failure if retval is as we expected ...
628 ERROR(tdev
, "perform_sglist failed, "
629 "iterations left %d, status %d\n",
635 /*-------------------------------------------------------------------------*/
637 /* unqueued control message testing
639 * there's a nice set of device functional requirements in chapter 9 of the
640 * usb 2.0 spec, which we can apply to ANY device, even ones that don't use
641 * special test firmware.
643 * we know the device is configured (or suspended) by the time it's visible
644 * through usbfs. we can't change that, so we won't test enumeration (which
645 * worked 'well enough' to get here, this time), power management (ditto),
646 * or remote wakeup (which needs human interaction).
649 static unsigned realworld
= 1;
650 module_param(realworld
, uint
, 0);
651 MODULE_PARM_DESC(realworld
, "clear to demand stricter spec compliance");
653 static int get_altsetting(struct usbtest_dev
*dev
)
655 struct usb_interface
*iface
= dev
->intf
;
656 struct usb_device
*udev
= interface_to_usbdev(iface
);
659 retval
= usb_control_msg(udev
, usb_rcvctrlpipe(udev
, 0),
660 USB_REQ_GET_INTERFACE
, USB_DIR_IN
|USB_RECIP_INTERFACE
,
661 0, iface
->altsetting
[0].desc
.bInterfaceNumber
,
662 dev
->buf
, 1, USB_CTRL_GET_TIMEOUT
);
674 static int set_altsetting(struct usbtest_dev
*dev
, int alternate
)
676 struct usb_interface
*iface
= dev
->intf
;
677 struct usb_device
*udev
;
679 if (alternate
< 0 || alternate
>= 256)
682 udev
= interface_to_usbdev(iface
);
683 return usb_set_interface(udev
,
684 iface
->altsetting
[0].desc
.bInterfaceNumber
,
688 static int is_good_config(struct usbtest_dev
*tdev
, int len
)
690 struct usb_config_descriptor
*config
;
692 if (len
< sizeof(*config
))
694 config
= (struct usb_config_descriptor
*) tdev
->buf
;
696 switch (config
->bDescriptorType
) {
698 case USB_DT_OTHER_SPEED_CONFIG
:
699 if (config
->bLength
!= 9) {
700 ERROR(tdev
, "bogus config descriptor length\n");
703 /* this bit 'must be 1' but often isn't */
704 if (!realworld
&& !(config
->bmAttributes
& 0x80)) {
705 ERROR(tdev
, "high bit of config attributes not set\n");
708 if (config
->bmAttributes
& 0x1f) { /* reserved == 0 */
709 ERROR(tdev
, "reserved config bits set\n");
717 if (le16_to_cpu(config
->wTotalLength
) == len
) /* read it all */
719 if (le16_to_cpu(config
->wTotalLength
) >= TBUF_SIZE
) /* max partial read */
721 ERROR(tdev
, "bogus config descriptor read size\n");
725 static int is_good_ext(struct usbtest_dev
*tdev
, u8
*buf
)
727 struct usb_ext_cap_descriptor
*ext
;
730 ext
= (struct usb_ext_cap_descriptor
*) buf
;
732 if (ext
->bLength
!= USB_DT_USB_EXT_CAP_SIZE
) {
733 ERROR(tdev
, "bogus usb 2.0 extension descriptor length\n");
737 attr
= le32_to_cpu(ext
->bmAttributes
);
738 /* bits[1:15] is used and others are reserved */
739 if (attr
& ~0xfffe) { /* reserved == 0 */
740 ERROR(tdev
, "reserved bits set\n");
747 static int is_good_ss_cap(struct usbtest_dev
*tdev
, u8
*buf
)
749 struct usb_ss_cap_descriptor
*ss
;
751 ss
= (struct usb_ss_cap_descriptor
*) buf
;
753 if (ss
->bLength
!= USB_DT_USB_SS_CAP_SIZE
) {
754 ERROR(tdev
, "bogus superspeed device capability descriptor length\n");
759 * only bit[1] of bmAttributes is used for LTM and others are
762 if (ss
->bmAttributes
& ~0x02) { /* reserved == 0 */
763 ERROR(tdev
, "reserved bits set in bmAttributes\n");
767 /* bits[0:3] of wSpeedSupported is used and others are reserved */
768 if (le16_to_cpu(ss
->wSpeedSupported
) & ~0x0f) { /* reserved == 0 */
769 ERROR(tdev
, "reserved bits set in wSpeedSupported\n");
776 static int is_good_con_id(struct usbtest_dev
*tdev
, u8
*buf
)
778 struct usb_ss_container_id_descriptor
*con_id
;
780 con_id
= (struct usb_ss_container_id_descriptor
*) buf
;
782 if (con_id
->bLength
!= USB_DT_USB_SS_CONTN_ID_SIZE
) {
783 ERROR(tdev
, "bogus container id descriptor length\n");
787 if (con_id
->bReserved
) { /* reserved == 0 */
788 ERROR(tdev
, "reserved bits set\n");
795 /* sanity test for standard requests working with usb_control_mesg() and some
796 * of the utility functions which use it.
798 * this doesn't test how endpoint halts behave or data toggles get set, since
799 * we won't do I/O to bulk/interrupt endpoints here (which is how to change
800 * halt or toggle). toggle testing is impractical without support from hcds.
802 * this avoids failing devices linux would normally work with, by not testing
803 * config/altsetting operations for devices that only support their defaults.
804 * such devices rarely support those needless operations.
806 * NOTE that since this is a sanity test, it's not examining boundary cases
807 * to see if usbcore, hcd, and device all behave right. such testing would
808 * involve varied read sizes and other operation sequences.
810 static int ch9_postconfig(struct usbtest_dev
*dev
)
812 struct usb_interface
*iface
= dev
->intf
;
813 struct usb_device
*udev
= interface_to_usbdev(iface
);
816 /* [9.2.3] if there's more than one altsetting, we need to be able to
817 * set and get each one. mostly trusts the descriptors from usbcore.
819 for (i
= 0; i
< iface
->num_altsetting
; i
++) {
821 /* 9.2.3 constrains the range here */
822 alt
= iface
->altsetting
[i
].desc
.bAlternateSetting
;
823 if (alt
< 0 || alt
>= iface
->num_altsetting
) {
825 "invalid alt [%d].bAltSetting = %d\n",
829 /* [real world] get/set unimplemented if there's only one */
830 if (realworld
&& iface
->num_altsetting
== 1)
833 /* [9.4.10] set_interface */
834 retval
= set_altsetting(dev
, alt
);
836 dev_err(&iface
->dev
, "can't set_interface = %d, %d\n",
841 /* [9.4.4] get_interface always works */
842 retval
= get_altsetting(dev
);
844 dev_err(&iface
->dev
, "get alt should be %d, was %d\n",
846 return (retval
< 0) ? retval
: -EDOM
;
851 /* [real world] get_config unimplemented if there's only one */
852 if (!realworld
|| udev
->descriptor
.bNumConfigurations
!= 1) {
853 int expected
= udev
->actconfig
->desc
.bConfigurationValue
;
855 /* [9.4.2] get_configuration always works
856 * ... although some cheap devices (like one TI Hub I've got)
857 * won't return config descriptors except before set_config.
859 retval
= usb_control_msg(udev
, usb_rcvctrlpipe(udev
, 0),
860 USB_REQ_GET_CONFIGURATION
,
861 USB_DIR_IN
| USB_RECIP_DEVICE
,
862 0, 0, dev
->buf
, 1, USB_CTRL_GET_TIMEOUT
);
863 if (retval
!= 1 || dev
->buf
[0] != expected
) {
864 dev_err(&iface
->dev
, "get config --> %d %d (1 %d)\n",
865 retval
, dev
->buf
[0], expected
);
866 return (retval
< 0) ? retval
: -EDOM
;
870 /* there's always [9.4.3] a device descriptor [9.6.1] */
871 retval
= usb_get_descriptor(udev
, USB_DT_DEVICE
, 0,
872 dev
->buf
, sizeof(udev
->descriptor
));
873 if (retval
!= sizeof(udev
->descriptor
)) {
874 dev_err(&iface
->dev
, "dev descriptor --> %d\n", retval
);
875 return (retval
< 0) ? retval
: -EDOM
;
879 * there's always [9.4.3] a bos device descriptor [9.6.2] in USB
882 if (le16_to_cpu(udev
->descriptor
.bcdUSB
) >= 0x0210) {
883 struct usb_bos_descriptor
*bos
= NULL
;
884 struct usb_dev_cap_header
*header
= NULL
;
885 unsigned total
, num
, length
;
888 retval
= usb_get_descriptor(udev
, USB_DT_BOS
, 0, dev
->buf
,
889 sizeof(*udev
->bos
->desc
));
890 if (retval
!= sizeof(*udev
->bos
->desc
)) {
891 dev_err(&iface
->dev
, "bos descriptor --> %d\n", retval
);
892 return (retval
< 0) ? retval
: -EDOM
;
895 bos
= (struct usb_bos_descriptor
*)dev
->buf
;
896 total
= le16_to_cpu(bos
->wTotalLength
);
897 num
= bos
->bNumDeviceCaps
;
899 if (total
> TBUF_SIZE
)
903 * get generic device-level capability descriptors [9.6.2]
906 retval
= usb_get_descriptor(udev
, USB_DT_BOS
, 0, dev
->buf
,
908 if (retval
!= total
) {
909 dev_err(&iface
->dev
, "bos descriptor set --> %d\n",
911 return (retval
< 0) ? retval
: -EDOM
;
914 length
= sizeof(*udev
->bos
->desc
);
916 for (i
= 0; i
< num
; i
++) {
918 if (buf
+ sizeof(struct usb_dev_cap_header
) >
922 header
= (struct usb_dev_cap_header
*)buf
;
923 length
= header
->bLength
;
925 if (header
->bDescriptorType
!=
926 USB_DT_DEVICE_CAPABILITY
) {
927 dev_warn(&udev
->dev
, "not device capability descriptor, skip\n");
931 switch (header
->bDevCapabilityType
) {
932 case USB_CAP_TYPE_EXT
:
933 if (buf
+ USB_DT_USB_EXT_CAP_SIZE
>
935 !is_good_ext(dev
, buf
)) {
936 dev_err(&iface
->dev
, "bogus usb 2.0 extension descriptor\n");
940 case USB_SS_CAP_TYPE
:
941 if (buf
+ USB_DT_USB_SS_CAP_SIZE
>
943 !is_good_ss_cap(dev
, buf
)) {
944 dev_err(&iface
->dev
, "bogus superspeed device capability descriptor\n");
948 case CONTAINER_ID_TYPE
:
949 if (buf
+ USB_DT_USB_SS_CONTN_ID_SIZE
>
951 !is_good_con_id(dev
, buf
)) {
952 dev_err(&iface
->dev
, "bogus container id descriptor\n");
962 /* there's always [9.4.3] at least one config descriptor [9.6.3] */
963 for (i
= 0; i
< udev
->descriptor
.bNumConfigurations
; i
++) {
964 retval
= usb_get_descriptor(udev
, USB_DT_CONFIG
, i
,
965 dev
->buf
, TBUF_SIZE
);
966 if (!is_good_config(dev
, retval
)) {
968 "config [%d] descriptor --> %d\n",
970 return (retval
< 0) ? retval
: -EDOM
;
973 /* FIXME cross-checking udev->config[i] to make sure usbcore
974 * parsed it right (etc) would be good testing paranoia
978 /* and sometimes [9.2.6.6] speed dependent descriptors */
979 if (le16_to_cpu(udev
->descriptor
.bcdUSB
) == 0x0200) {
980 struct usb_qualifier_descriptor
*d
= NULL
;
982 /* device qualifier [9.6.2] */
983 retval
= usb_get_descriptor(udev
,
984 USB_DT_DEVICE_QUALIFIER
, 0, dev
->buf
,
985 sizeof(struct usb_qualifier_descriptor
));
986 if (retval
== -EPIPE
) {
987 if (udev
->speed
== USB_SPEED_HIGH
) {
989 "hs dev qualifier --> %d\n",
993 /* usb2.0 but not high-speed capable; fine */
994 } else if (retval
!= sizeof(struct usb_qualifier_descriptor
)) {
995 dev_err(&iface
->dev
, "dev qualifier --> %d\n", retval
);
996 return (retval
< 0) ? retval
: -EDOM
;
998 d
= (struct usb_qualifier_descriptor
*) dev
->buf
;
1000 /* might not have [9.6.2] any other-speed configs [9.6.4] */
1002 unsigned max
= d
->bNumConfigurations
;
1003 for (i
= 0; i
< max
; i
++) {
1004 retval
= usb_get_descriptor(udev
,
1005 USB_DT_OTHER_SPEED_CONFIG
, i
,
1006 dev
->buf
, TBUF_SIZE
);
1007 if (!is_good_config(dev
, retval
)) {
1008 dev_err(&iface
->dev
,
1009 "other speed config --> %d\n",
1011 return (retval
< 0) ? retval
: -EDOM
;
1016 /* FIXME fetch strings from at least the device descriptor */
1018 /* [9.4.5] get_status always works */
1019 retval
= usb_get_status(udev
, USB_RECIP_DEVICE
, 0, dev
->buf
);
1021 dev_err(&iface
->dev
, "get dev status --> %d\n", retval
);
1025 /* FIXME configuration.bmAttributes says if we could try to set/clear
1026 * the device's remote wakeup feature ... if we can, test that here
1029 retval
= usb_get_status(udev
, USB_RECIP_INTERFACE
,
1030 iface
->altsetting
[0].desc
.bInterfaceNumber
, dev
->buf
);
1032 dev_err(&iface
->dev
, "get interface status --> %d\n", retval
);
1035 /* FIXME get status for each endpoint in the interface */
1040 /*-------------------------------------------------------------------------*/
1042 /* use ch9 requests to test whether:
1043 * (a) queues work for control, keeping N subtests queued and
1044 * active (auto-resubmit) for M loops through the queue.
1045 * (b) protocol stalls (control-only) will autorecover.
1046 * it's not like bulk/intr; no halt clearing.
1047 * (c) short control reads are reported and handled.
1048 * (d) queues are always processed in-order
1053 struct usbtest_dev
*dev
;
1054 struct completion complete
;
1059 struct usbtest_param_32
*param
;
1063 #define NUM_SUBCASES 16 /* how many test subcases here? */
1066 struct usb_ctrlrequest setup
;
1071 static void ctrl_complete(struct urb
*urb
)
1073 struct ctrl_ctx
*ctx
= urb
->context
;
1074 struct usb_ctrlrequest
*reqp
;
1075 struct subcase
*subcase
;
1076 int status
= urb
->status
;
1078 reqp
= (struct usb_ctrlrequest
*)urb
->setup_packet
;
1079 subcase
= container_of(reqp
, struct subcase
, setup
);
1081 spin_lock(&ctx
->lock
);
1085 /* queue must transfer and complete in fifo order, unless
1086 * usb_unlink_urb() is used to unlink something not at the
1087 * physical queue head (not tested).
1089 if (subcase
->number
> 0) {
1090 if ((subcase
->number
- ctx
->last
) != 1) {
1092 "subcase %d completed out of order, last %d\n",
1093 subcase
->number
, ctx
->last
);
1095 ctx
->last
= subcase
->number
;
1099 ctx
->last
= subcase
->number
;
1101 /* succeed or fault in only one way? */
1102 if (status
== subcase
->expected
)
1105 /* async unlink for cleanup? */
1106 else if (status
!= -ECONNRESET
) {
1108 /* some faults are allowed, not required */
1109 if (subcase
->expected
> 0 && (
1110 ((status
== -subcase
->expected
/* happened */
1111 || status
== 0)))) /* didn't */
1113 /* sometimes more than one fault is allowed */
1114 else if (subcase
->number
== 12 && status
== -EPIPE
)
1117 ERROR(ctx
->dev
, "subtest %d error, status %d\n",
1118 subcase
->number
, status
);
1121 /* unexpected status codes mean errors; ideally, in hardware */
1124 if (ctx
->status
== 0) {
1127 ctx
->status
= status
;
1128 ERROR(ctx
->dev
, "control queue %02x.%02x, err %d, "
1129 "%d left, subcase %d, len %d/%d\n",
1130 reqp
->bRequestType
, reqp
->bRequest
,
1131 status
, ctx
->count
, subcase
->number
,
1133 urb
->transfer_buffer_length
);
1135 /* FIXME this "unlink everything" exit route should
1136 * be a separate test case.
1139 /* unlink whatever's still pending */
1140 for (i
= 1; i
< ctx
->param
->sglen
; i
++) {
1141 struct urb
*u
= ctx
->urb
[
1142 (i
+ subcase
->number
)
1143 % ctx
->param
->sglen
];
1145 if (u
== urb
|| !u
->dev
)
1147 spin_unlock(&ctx
->lock
);
1148 status
= usb_unlink_urb(u
);
1149 spin_lock(&ctx
->lock
);
1156 ERROR(ctx
->dev
, "urb unlink --> %d\n",
1160 status
= ctx
->status
;
1164 /* resubmit if we need to, else mark this as done */
1165 if ((status
== 0) && (ctx
->pending
< ctx
->count
)) {
1166 status
= usb_submit_urb(urb
, GFP_ATOMIC
);
1169 "can't resubmit ctrl %02x.%02x, err %d\n",
1170 reqp
->bRequestType
, reqp
->bRequest
, status
);
1177 /* signal completion when nothing's queued */
1178 if (ctx
->pending
== 0)
1179 complete(&ctx
->complete
);
1180 spin_unlock(&ctx
->lock
);
1184 test_ctrl_queue(struct usbtest_dev
*dev
, struct usbtest_param_32
*param
)
1186 struct usb_device
*udev
= testdev_to_usbdev(dev
);
1188 struct ctrl_ctx context
;
1191 if (param
->sglen
== 0 || param
->iterations
> UINT_MAX
/ param
->sglen
)
1194 spin_lock_init(&context
.lock
);
1196 init_completion(&context
.complete
);
1197 context
.count
= param
->sglen
* param
->iterations
;
1198 context
.pending
= 0;
1199 context
.status
= -ENOMEM
;
1200 context
.param
= param
;
1203 /* allocate and init the urbs we'll queue.
1204 * as with bulk/intr sglists, sglen is the queue depth; it also
1205 * controls which subtests run (more tests than sglen) or rerun.
1207 urb
= kcalloc(param
->sglen
, sizeof(struct urb
*), GFP_KERNEL
);
1210 for (i
= 0; i
< param
->sglen
; i
++) {
1211 int pipe
= usb_rcvctrlpipe(udev
, 0);
1214 struct usb_ctrlrequest req
;
1215 struct subcase
*reqp
;
1217 /* sign of this variable means:
1218 * -: tested code must return this (negative) error code
1219 * +: tested code may return this (negative too) error code
1223 /* requests here are mostly expected to succeed on any
1224 * device, but some are chosen to trigger protocol stalls
1227 memset(&req
, 0, sizeof(req
));
1228 req
.bRequest
= USB_REQ_GET_DESCRIPTOR
;
1229 req
.bRequestType
= USB_DIR_IN
|USB_RECIP_DEVICE
;
1231 switch (i
% NUM_SUBCASES
) {
1232 case 0: /* get device descriptor */
1233 req
.wValue
= cpu_to_le16(USB_DT_DEVICE
<< 8);
1234 len
= sizeof(struct usb_device_descriptor
);
1236 case 1: /* get first config descriptor (only) */
1237 req
.wValue
= cpu_to_le16((USB_DT_CONFIG
<< 8) | 0);
1238 len
= sizeof(struct usb_config_descriptor
);
1240 case 2: /* get altsetting (OFTEN STALLS) */
1241 req
.bRequest
= USB_REQ_GET_INTERFACE
;
1242 req
.bRequestType
= USB_DIR_IN
|USB_RECIP_INTERFACE
;
1243 /* index = 0 means first interface */
1247 case 3: /* get interface status */
1248 req
.bRequest
= USB_REQ_GET_STATUS
;
1249 req
.bRequestType
= USB_DIR_IN
|USB_RECIP_INTERFACE
;
1253 case 4: /* get device status */
1254 req
.bRequest
= USB_REQ_GET_STATUS
;
1255 req
.bRequestType
= USB_DIR_IN
|USB_RECIP_DEVICE
;
1258 case 5: /* get device qualifier (MAY STALL) */
1259 req
.wValue
= cpu_to_le16 (USB_DT_DEVICE_QUALIFIER
<< 8);
1260 len
= sizeof(struct usb_qualifier_descriptor
);
1261 if (udev
->speed
!= USB_SPEED_HIGH
)
1264 case 6: /* get first config descriptor, plus interface */
1265 req
.wValue
= cpu_to_le16((USB_DT_CONFIG
<< 8) | 0);
1266 len
= sizeof(struct usb_config_descriptor
);
1267 len
+= sizeof(struct usb_interface_descriptor
);
1269 case 7: /* get interface descriptor (ALWAYS STALLS) */
1270 req
.wValue
= cpu_to_le16 (USB_DT_INTERFACE
<< 8);
1271 /* interface == 0 */
1272 len
= sizeof(struct usb_interface_descriptor
);
1275 /* NOTE: two consecutive stalls in the queue here.
1276 * that tests fault recovery a bit more aggressively. */
1277 case 8: /* clear endpoint halt (MAY STALL) */
1278 req
.bRequest
= USB_REQ_CLEAR_FEATURE
;
1279 req
.bRequestType
= USB_RECIP_ENDPOINT
;
1280 /* wValue 0 == ep halt */
1281 /* wIndex 0 == ep0 (shouldn't halt!) */
1283 pipe
= usb_sndctrlpipe(udev
, 0);
1286 case 9: /* get endpoint status */
1287 req
.bRequest
= USB_REQ_GET_STATUS
;
1288 req
.bRequestType
= USB_DIR_IN
|USB_RECIP_ENDPOINT
;
1292 case 10: /* trigger short read (EREMOTEIO) */
1293 req
.wValue
= cpu_to_le16((USB_DT_CONFIG
<< 8) | 0);
1295 expected
= -EREMOTEIO
;
1297 /* NOTE: two consecutive _different_ faults in the queue. */
1298 case 11: /* get endpoint descriptor (ALWAYS STALLS) */
1299 req
.wValue
= cpu_to_le16(USB_DT_ENDPOINT
<< 8);
1301 len
= sizeof(struct usb_interface_descriptor
);
1304 /* NOTE: sometimes even a third fault in the queue! */
1305 case 12: /* get string 0 descriptor (MAY STALL) */
1306 req
.wValue
= cpu_to_le16(USB_DT_STRING
<< 8);
1307 /* string == 0, for language IDs */
1308 len
= sizeof(struct usb_interface_descriptor
);
1309 /* may succeed when > 4 languages */
1310 expected
= EREMOTEIO
; /* or EPIPE, if no strings */
1312 case 13: /* short read, resembling case 10 */
1313 req
.wValue
= cpu_to_le16((USB_DT_CONFIG
<< 8) | 0);
1314 /* last data packet "should" be DATA1, not DATA0 */
1315 if (udev
->speed
== USB_SPEED_SUPER
)
1318 len
= 1024 - udev
->descriptor
.bMaxPacketSize0
;
1319 expected
= -EREMOTEIO
;
1321 case 14: /* short read; try to fill the last packet */
1322 req
.wValue
= cpu_to_le16((USB_DT_DEVICE
<< 8) | 0);
1323 /* device descriptor size == 18 bytes */
1324 len
= udev
->descriptor
.bMaxPacketSize0
;
1325 if (udev
->speed
== USB_SPEED_SUPER
)
1335 expected
= -EREMOTEIO
;
1338 req
.wValue
= cpu_to_le16(USB_DT_BOS
<< 8);
1340 len
= le16_to_cpu(udev
->bos
->desc
->wTotalLength
);
1342 len
= sizeof(struct usb_bos_descriptor
);
1343 if (le16_to_cpu(udev
->descriptor
.bcdUSB
) < 0x0201)
1347 ERROR(dev
, "bogus number of ctrl queue testcases!\n");
1348 context
.status
= -EINVAL
;
1351 req
.wLength
= cpu_to_le16(len
);
1352 urb
[i
] = u
= simple_alloc_urb(udev
, pipe
, len
, 0);
1356 reqp
= kmalloc(sizeof(*reqp
), GFP_KERNEL
);
1360 reqp
->number
= i
% NUM_SUBCASES
;
1361 reqp
->expected
= expected
;
1362 u
->setup_packet
= (char *) &reqp
->setup
;
1364 u
->context
= &context
;
1365 u
->complete
= ctrl_complete
;
1368 /* queue the urbs */
1370 spin_lock_irq(&context
.lock
);
1371 for (i
= 0; i
< param
->sglen
; i
++) {
1372 context
.status
= usb_submit_urb(urb
[i
], GFP_ATOMIC
);
1373 if (context
.status
!= 0) {
1374 ERROR(dev
, "can't submit urb[%d], status %d\n",
1376 context
.count
= context
.pending
;
1381 spin_unlock_irq(&context
.lock
);
1383 /* FIXME set timer and time out; provide a disconnect hook */
1385 /* wait for the last one to complete */
1386 if (context
.pending
> 0)
1387 wait_for_completion(&context
.complete
);
1390 for (i
= 0; i
< param
->sglen
; i
++) {
1394 kfree(urb
[i
]->setup_packet
);
1395 simple_free_urb(urb
[i
]);
1398 return context
.status
;
1403 /*-------------------------------------------------------------------------*/
1405 static void unlink1_callback(struct urb
*urb
)
1407 int status
= urb
->status
;
1409 /* we "know" -EPIPE (stall) never happens */
1411 status
= usb_submit_urb(urb
, GFP_ATOMIC
);
1413 urb
->status
= status
;
1414 complete(urb
->context
);
1418 static int unlink1(struct usbtest_dev
*dev
, int pipe
, int size
, int async
)
1421 struct completion completion
;
1424 init_completion(&completion
);
1425 urb
= simple_alloc_urb(testdev_to_usbdev(dev
), pipe
, size
, 0);
1428 urb
->context
= &completion
;
1429 urb
->complete
= unlink1_callback
;
1431 if (usb_pipeout(urb
->pipe
)) {
1432 simple_fill_buf(urb
);
1433 urb
->transfer_flags
|= URB_ZERO_PACKET
;
1436 /* keep the endpoint busy. there are lots of hc/hcd-internal
1437 * states, and testing should get to all of them over time.
1439 * FIXME want additional tests for when endpoint is STALLing
1440 * due to errors, or is just NAKing requests.
1442 retval
= usb_submit_urb(urb
, GFP_KERNEL
);
1444 dev_err(&dev
->intf
->dev
, "submit fail %d\n", retval
);
1448 /* unlinking that should always work. variable delay tests more
1449 * hcd states and code paths, even with little other system load.
1451 msleep(jiffies
% (2 * INTERRUPT_RATE
));
1453 while (!completion_done(&completion
)) {
1454 retval
= usb_unlink_urb(urb
);
1456 if (retval
== 0 && usb_pipein(urb
->pipe
))
1457 retval
= simple_check_buf(dev
, urb
);
1462 /* we can't unlink urbs while they're completing
1463 * or if they've completed, and we haven't
1464 * resubmitted. "normal" drivers would prevent
1465 * resubmission, but since we're testing unlink
1468 ERROR(dev
, "unlink retry\n");
1475 dev_err(&dev
->intf
->dev
,
1476 "unlink fail %d\n", retval
);
1485 wait_for_completion(&completion
);
1486 retval
= urb
->status
;
1487 simple_free_urb(urb
);
1490 return (retval
== -ECONNRESET
) ? 0 : retval
- 1000;
1492 return (retval
== -ENOENT
|| retval
== -EPERM
) ?
1496 static int unlink_simple(struct usbtest_dev
*dev
, int pipe
, int len
)
1500 /* test sync and async paths */
1501 retval
= unlink1(dev
, pipe
, len
, 1);
1503 retval
= unlink1(dev
, pipe
, len
, 0);
1507 /*-------------------------------------------------------------------------*/
1510 struct completion complete
;
1517 static void unlink_queued_callback(struct urb
*urb
)
1519 int status
= urb
->status
;
1520 struct queued_ctx
*ctx
= urb
->context
;
1524 if (urb
== ctx
->urbs
[ctx
->num
- 4] || urb
== ctx
->urbs
[ctx
->num
- 2]) {
1525 if (status
== -ECONNRESET
)
1527 /* What error should we report if the URB completed normally? */
1530 ctx
->status
= status
;
1533 if (atomic_dec_and_test(&ctx
->pending
))
1534 complete(&ctx
->complete
);
1537 static int unlink_queued(struct usbtest_dev
*dev
, int pipe
, unsigned num
,
1540 struct queued_ctx ctx
;
1541 struct usb_device
*udev
= testdev_to_usbdev(dev
);
1545 int retval
= -ENOMEM
;
1547 init_completion(&ctx
.complete
);
1548 atomic_set(&ctx
.pending
, 1); /* One more than the actual value */
1552 buf
= usb_alloc_coherent(udev
, size
, GFP_KERNEL
, &buf_dma
);
1555 memset(buf
, 0, size
);
1557 /* Allocate and init the urbs we'll queue */
1558 ctx
.urbs
= kcalloc(num
, sizeof(struct urb
*), GFP_KERNEL
);
1561 for (i
= 0; i
< num
; i
++) {
1562 ctx
.urbs
[i
] = usb_alloc_urb(0, GFP_KERNEL
);
1565 usb_fill_bulk_urb(ctx
.urbs
[i
], udev
, pipe
, buf
, size
,
1566 unlink_queued_callback
, &ctx
);
1567 ctx
.urbs
[i
]->transfer_dma
= buf_dma
;
1568 ctx
.urbs
[i
]->transfer_flags
= URB_NO_TRANSFER_DMA_MAP
;
1570 if (usb_pipeout(ctx
.urbs
[i
]->pipe
)) {
1571 simple_fill_buf(ctx
.urbs
[i
]);
1572 ctx
.urbs
[i
]->transfer_flags
|= URB_ZERO_PACKET
;
1576 /* Submit all the URBs and then unlink URBs num - 4 and num - 2. */
1577 for (i
= 0; i
< num
; i
++) {
1578 atomic_inc(&ctx
.pending
);
1579 retval
= usb_submit_urb(ctx
.urbs
[i
], GFP_KERNEL
);
1581 dev_err(&dev
->intf
->dev
, "submit urbs[%d] fail %d\n",
1583 atomic_dec(&ctx
.pending
);
1584 ctx
.status
= retval
;
1589 usb_unlink_urb(ctx
.urbs
[num
- 4]);
1590 usb_unlink_urb(ctx
.urbs
[num
- 2]);
1593 usb_unlink_urb(ctx
.urbs
[i
]);
1596 if (atomic_dec_and_test(&ctx
.pending
)) /* The extra count */
1597 complete(&ctx
.complete
);
1598 wait_for_completion(&ctx
.complete
);
1599 retval
= ctx
.status
;
1602 for (i
= 0; i
< num
; i
++)
1603 usb_free_urb(ctx
.urbs
[i
]);
1606 usb_free_coherent(udev
, size
, buf
, buf_dma
);
1610 /*-------------------------------------------------------------------------*/
1612 static int verify_not_halted(struct usbtest_dev
*tdev
, int ep
, struct urb
*urb
)
1617 /* shouldn't look or act halted */
1618 retval
= usb_get_status(urb
->dev
, USB_RECIP_ENDPOINT
, ep
, &status
);
1620 ERROR(tdev
, "ep %02x couldn't get no-halt status, %d\n",
1625 ERROR(tdev
, "ep %02x bogus status: %04x != 0\n", ep
, status
);
1628 retval
= simple_io(tdev
, urb
, 1, 0, 0, __func__
);
1634 static int verify_halted(struct usbtest_dev
*tdev
, int ep
, struct urb
*urb
)
1639 /* should look and act halted */
1640 retval
= usb_get_status(urb
->dev
, USB_RECIP_ENDPOINT
, ep
, &status
);
1642 ERROR(tdev
, "ep %02x couldn't get halt status, %d\n",
1647 ERROR(tdev
, "ep %02x bogus status: %04x != 1\n", ep
, status
);
1650 retval
= simple_io(tdev
, urb
, 1, 0, -EPIPE
, __func__
);
1651 if (retval
!= -EPIPE
)
1653 retval
= simple_io(tdev
, urb
, 1, 0, -EPIPE
, "verify_still_halted");
1654 if (retval
!= -EPIPE
)
1659 static int test_halt(struct usbtest_dev
*tdev
, int ep
, struct urb
*urb
)
1663 /* shouldn't look or act halted now */
1664 retval
= verify_not_halted(tdev
, ep
, urb
);
1668 /* set halt (protocol test only), verify it worked */
1669 retval
= usb_control_msg(urb
->dev
, usb_sndctrlpipe(urb
->dev
, 0),
1670 USB_REQ_SET_FEATURE
, USB_RECIP_ENDPOINT
,
1671 USB_ENDPOINT_HALT
, ep
,
1672 NULL
, 0, USB_CTRL_SET_TIMEOUT
);
1674 ERROR(tdev
, "ep %02x couldn't set halt, %d\n", ep
, retval
);
1677 retval
= verify_halted(tdev
, ep
, urb
);
1681 /* clear halt anyways, else further tests will fail */
1682 ret
= usb_clear_halt(urb
->dev
, urb
->pipe
);
1684 ERROR(tdev
, "ep %02x couldn't clear halt, %d\n",
1690 /* clear halt (tests API + protocol), verify it worked */
1691 retval
= usb_clear_halt(urb
->dev
, urb
->pipe
);
1693 ERROR(tdev
, "ep %02x couldn't clear halt, %d\n", ep
, retval
);
1696 retval
= verify_not_halted(tdev
, ep
, urb
);
1700 /* NOTE: could also verify SET_INTERFACE clear halts ... */
1705 static int halt_simple(struct usbtest_dev
*dev
)
1710 struct usb_device
*udev
= testdev_to_usbdev(dev
);
1712 if (udev
->speed
== USB_SPEED_SUPER
)
1713 urb
= simple_alloc_urb(udev
, 0, 1024, 0);
1715 urb
= simple_alloc_urb(udev
, 0, 512, 0);
1720 ep
= usb_pipeendpoint(dev
->in_pipe
) | USB_DIR_IN
;
1721 urb
->pipe
= dev
->in_pipe
;
1722 retval
= test_halt(dev
, ep
, urb
);
1727 if (dev
->out_pipe
) {
1728 ep
= usb_pipeendpoint(dev
->out_pipe
);
1729 urb
->pipe
= dev
->out_pipe
;
1730 retval
= test_halt(dev
, ep
, urb
);
1733 simple_free_urb(urb
);
1737 /*-------------------------------------------------------------------------*/
1739 /* Control OUT tests use the vendor control requests from Intel's
1740 * USB 2.0 compliance test device: write a buffer, read it back.
1742 * Intel's spec only _requires_ that it work for one packet, which
1743 * is pretty weak. Some HCDs place limits here; most devices will
1744 * need to be able to handle more than one OUT data packet. We'll
1745 * try whatever we're told to try.
1747 static int ctrl_out(struct usbtest_dev
*dev
,
1748 unsigned count
, unsigned length
, unsigned vary
, unsigned offset
)
1754 struct usb_device
*udev
;
1756 if (length
< 1 || length
> 0xffff || vary
>= length
)
1759 buf
= kmalloc(length
+ offset
, GFP_KERNEL
);
1764 udev
= testdev_to_usbdev(dev
);
1768 /* NOTE: hardware might well act differently if we pushed it
1769 * with lots back-to-back queued requests.
1771 for (i
= 0; i
< count
; i
++) {
1772 /* write patterned data */
1773 for (j
= 0; j
< len
; j
++)
1774 buf
[j
] = (u8
)(i
+ j
);
1775 retval
= usb_control_msg(udev
, usb_sndctrlpipe(udev
, 0),
1776 0x5b, USB_DIR_OUT
|USB_TYPE_VENDOR
,
1777 0, 0, buf
, len
, USB_CTRL_SET_TIMEOUT
);
1778 if (retval
!= len
) {
1781 ERROR(dev
, "ctrl_out, wlen %d (expected %d)\n",
1788 /* read it back -- assuming nothing intervened!! */
1789 retval
= usb_control_msg(udev
, usb_rcvctrlpipe(udev
, 0),
1790 0x5c, USB_DIR_IN
|USB_TYPE_VENDOR
,
1791 0, 0, buf
, len
, USB_CTRL_GET_TIMEOUT
);
1792 if (retval
!= len
) {
1795 ERROR(dev
, "ctrl_out, rlen %d (expected %d)\n",
1802 /* fail if we can't verify */
1803 for (j
= 0; j
< len
; j
++) {
1804 if (buf
[j
] != (u8
)(i
+ j
)) {
1805 ERROR(dev
, "ctrl_out, byte %d is %d not %d\n",
1806 j
, buf
[j
], (u8
)(i
+ j
));
1818 /* [real world] the "zero bytes IN" case isn't really used.
1819 * hardware can easily trip up in this weird case, since its
1820 * status stage is IN, not OUT like other ep0in transfers.
1823 len
= realworld
? 1 : 0;
1827 ERROR(dev
, "ctrl_out %s failed, code %d, count %d\n",
1830 kfree(buf
- offset
);
1834 /*-------------------------------------------------------------------------*/
1836 /* ISO/BULK tests ... mimics common usage
1837 * - buffer length is split into N packets (mostly maxpacket sized)
1838 * - multi-buffers according to sglen
1841 struct transfer_context
{
1845 struct completion done
;
1847 unsigned long errors
;
1848 unsigned long packet_count
;
1849 struct usbtest_dev
*dev
;
1853 static void complicated_callback(struct urb
*urb
)
1855 struct transfer_context
*ctx
= urb
->context
;
1857 spin_lock(&ctx
->lock
);
1860 ctx
->packet_count
+= urb
->number_of_packets
;
1861 if (urb
->error_count
> 0)
1862 ctx
->errors
+= urb
->error_count
;
1863 else if (urb
->status
!= 0)
1864 ctx
->errors
+= (ctx
->is_iso
? urb
->number_of_packets
: 1);
1865 else if (urb
->actual_length
!= urb
->transfer_buffer_length
)
1867 else if (check_guard_bytes(ctx
->dev
, urb
) != 0)
1870 if (urb
->status
== 0 && ctx
->count
> (ctx
->pending
- 1)
1871 && !ctx
->submit_error
) {
1872 int status
= usb_submit_urb(urb
, GFP_ATOMIC
);
1877 dev_err(&ctx
->dev
->intf
->dev
,
1878 "resubmit err %d\n",
1881 case -ENODEV
: /* disconnected */
1882 case -ESHUTDOWN
: /* endpoint disabled */
1883 ctx
->submit_error
= 1;
1889 if (ctx
->pending
== 0) {
1891 dev_err(&ctx
->dev
->intf
->dev
,
1892 "during the test, %lu errors out of %lu\n",
1893 ctx
->errors
, ctx
->packet_count
);
1894 complete(&ctx
->done
);
1897 spin_unlock(&ctx
->lock
);
1900 static struct urb
*iso_alloc_urb(
1901 struct usb_device
*udev
,
1903 struct usb_endpoint_descriptor
*desc
,
1909 unsigned i
, maxp
, packets
;
1911 if (bytes
< 0 || !desc
)
1913 maxp
= usb_endpoint_maxp(desc
);
1914 maxp
*= usb_endpoint_maxp_mult(desc
);
1915 packets
= DIV_ROUND_UP(bytes
, maxp
);
1917 urb
= usb_alloc_urb(packets
, GFP_KERNEL
);
1923 urb
->number_of_packets
= packets
;
1924 urb
->transfer_buffer_length
= bytes
;
1925 urb
->transfer_buffer
= usb_alloc_coherent(udev
, bytes
+ offset
,
1927 &urb
->transfer_dma
);
1928 if (!urb
->transfer_buffer
) {
1933 memset(urb
->transfer_buffer
, GUARD_BYTE
, offset
);
1934 urb
->transfer_buffer
+= offset
;
1935 urb
->transfer_dma
+= offset
;
1937 /* For inbound transfers use guard byte so that test fails if
1938 data not correctly copied */
1939 memset(urb
->transfer_buffer
,
1940 usb_pipein(urb
->pipe
) ? GUARD_BYTE
: 0,
1943 for (i
= 0; i
< packets
; i
++) {
1944 /* here, only the last packet will be short */
1945 urb
->iso_frame_desc
[i
].length
= min((unsigned) bytes
, maxp
);
1946 bytes
-= urb
->iso_frame_desc
[i
].length
;
1948 urb
->iso_frame_desc
[i
].offset
= maxp
* i
;
1951 urb
->complete
= complicated_callback
;
1952 /* urb->context = SET BY CALLER */
1953 urb
->interval
= 1 << (desc
->bInterval
- 1);
1954 urb
->transfer_flags
= URB_ISO_ASAP
| URB_NO_TRANSFER_DMA_MAP
;
1959 test_queue(struct usbtest_dev
*dev
, struct usbtest_param_32
*param
,
1960 int pipe
, struct usb_endpoint_descriptor
*desc
, unsigned offset
)
1962 struct transfer_context context
;
1963 struct usb_device
*udev
;
1965 unsigned long packets
= 0;
1967 struct urb
*urbs
[param
->sglen
];
1969 if (!param
->sglen
|| param
->iterations
> UINT_MAX
/ param
->sglen
)
1972 memset(&context
, 0, sizeof(context
));
1973 context
.count
= param
->iterations
* param
->sglen
;
1975 context
.is_iso
= !!desc
;
1976 init_completion(&context
.done
);
1977 spin_lock_init(&context
.lock
);
1979 udev
= testdev_to_usbdev(dev
);
1981 for (i
= 0; i
< param
->sglen
; i
++) {
1983 urbs
[i
] = iso_alloc_urb(udev
, pipe
, desc
,
1984 param
->length
, offset
);
1986 urbs
[i
] = complicated_alloc_urb(udev
, pipe
,
1993 packets
+= urbs
[i
]->number_of_packets
;
1994 urbs
[i
]->context
= &context
;
1996 packets
*= param
->iterations
;
1998 if (context
.is_iso
) {
1999 dev_info(&dev
->intf
->dev
,
2000 "iso period %d %sframes, wMaxPacket %d, transactions: %d\n",
2001 1 << (desc
->bInterval
- 1),
2002 (udev
->speed
== USB_SPEED_HIGH
) ? "micro" : "",
2003 usb_endpoint_maxp(desc
),
2004 usb_endpoint_maxp_mult(desc
));
2006 dev_info(&dev
->intf
->dev
,
2007 "total %lu msec (%lu packets)\n",
2008 (packets
* (1 << (desc
->bInterval
- 1)))
2009 / ((udev
->speed
== USB_SPEED_HIGH
) ? 8 : 1),
2013 spin_lock_irq(&context
.lock
);
2014 for (i
= 0; i
< param
->sglen
; i
++) {
2016 status
= usb_submit_urb(urbs
[i
], GFP_ATOMIC
);
2018 ERROR(dev
, "submit iso[%d], error %d\n", i
, status
);
2020 spin_unlock_irq(&context
.lock
);
2024 simple_free_urb(urbs
[i
]);
2027 context
.submit_error
= 1;
2031 spin_unlock_irq(&context
.lock
);
2033 wait_for_completion(&context
.done
);
2035 for (i
= 0; i
< param
->sglen
; i
++) {
2037 simple_free_urb(urbs
[i
]);
2040 * Isochronous transfers are expected to fail sometimes. As an
2041 * arbitrary limit, we will report an error if any submissions
2042 * fail or if the transfer failure rate is > 10%.
2046 else if (context
.submit_error
)
2048 else if (context
.errors
>
2049 (context
.is_iso
? context
.packet_count
/ 10 : 0))
2054 for (i
= 0; i
< param
->sglen
; i
++) {
2056 simple_free_urb(urbs
[i
]);
2061 static int test_unaligned_bulk(
2062 struct usbtest_dev
*tdev
,
2066 unsigned transfer_flags
,
2070 struct urb
*urb
= usbtest_alloc_urb(testdev_to_usbdev(tdev
),
2071 pipe
, length
, transfer_flags
, 1, 0, simple_callback
);
2076 retval
= simple_io(tdev
, urb
, iterations
, 0, 0, label
);
2077 simple_free_urb(urb
);
2083 usbtest_do_ioctl(struct usb_interface
*intf
, struct usbtest_param_32
*param
)
2085 struct usbtest_dev
*dev
= usb_get_intfdata(intf
);
2086 struct usb_device
*udev
= testdev_to_usbdev(dev
);
2088 struct scatterlist
*sg
;
2089 struct usb_sg_request req
;
2091 int retval
= -EOPNOTSUPP
;
2093 if (param
->iterations
<= 0)
2095 if (param
->sglen
> MAX_SGLEN
)
2098 * Just a bunch of test cases that every HCD is expected to handle.
2100 * Some may need specific firmware, though it'd be good to have
2101 * one firmware image to handle all the test cases.
2103 * FIXME add more tests! cancel requests, verify the data, control
2104 * queueing, concurrent read+write threads, and so on.
2106 switch (param
->test_num
) {
2109 dev_info(&intf
->dev
, "TEST 0: NOP\n");
2113 /* Simple non-queued bulk I/O tests */
2115 if (dev
->out_pipe
== 0)
2117 dev_info(&intf
->dev
,
2118 "TEST 1: write %d bytes %u times\n",
2119 param
->length
, param
->iterations
);
2120 urb
= simple_alloc_urb(udev
, dev
->out_pipe
, param
->length
, 0);
2125 /* FIRMWARE: bulk sink (maybe accepts short writes) */
2126 retval
= simple_io(dev
, urb
, param
->iterations
, 0, 0, "test1");
2127 simple_free_urb(urb
);
2130 if (dev
->in_pipe
== 0)
2132 dev_info(&intf
->dev
,
2133 "TEST 2: read %d bytes %u times\n",
2134 param
->length
, param
->iterations
);
2135 urb
= simple_alloc_urb(udev
, dev
->in_pipe
, param
->length
, 0);
2140 /* FIRMWARE: bulk source (maybe generates short writes) */
2141 retval
= simple_io(dev
, urb
, param
->iterations
, 0, 0, "test2");
2142 simple_free_urb(urb
);
2145 if (dev
->out_pipe
== 0 || param
->vary
== 0)
2147 dev_info(&intf
->dev
,
2148 "TEST 3: write/%d 0..%d bytes %u times\n",
2149 param
->vary
, param
->length
, param
->iterations
);
2150 urb
= simple_alloc_urb(udev
, dev
->out_pipe
, param
->length
, 0);
2155 /* FIRMWARE: bulk sink (maybe accepts short writes) */
2156 retval
= simple_io(dev
, urb
, param
->iterations
, param
->vary
,
2158 simple_free_urb(urb
);
2161 if (dev
->in_pipe
== 0 || param
->vary
== 0)
2163 dev_info(&intf
->dev
,
2164 "TEST 4: read/%d 0..%d bytes %u times\n",
2165 param
->vary
, param
->length
, param
->iterations
);
2166 urb
= simple_alloc_urb(udev
, dev
->in_pipe
, param
->length
, 0);
2171 /* FIRMWARE: bulk source (maybe generates short writes) */
2172 retval
= simple_io(dev
, urb
, param
->iterations
, param
->vary
,
2174 simple_free_urb(urb
);
2177 /* Queued bulk I/O tests */
2179 if (dev
->out_pipe
== 0 || param
->sglen
== 0)
2181 dev_info(&intf
->dev
,
2182 "TEST 5: write %d sglists %d entries of %d bytes\n",
2184 param
->sglen
, param
->length
);
2185 sg
= alloc_sglist(param
->sglen
, param
->length
,
2186 0, dev
, dev
->out_pipe
);
2191 /* FIRMWARE: bulk sink (maybe accepts short writes) */
2192 retval
= perform_sglist(dev
, param
->iterations
, dev
->out_pipe
,
2193 &req
, sg
, param
->sglen
);
2194 free_sglist(sg
, param
->sglen
);
2198 if (dev
->in_pipe
== 0 || param
->sglen
== 0)
2200 dev_info(&intf
->dev
,
2201 "TEST 6: read %d sglists %d entries of %d bytes\n",
2203 param
->sglen
, param
->length
);
2204 sg
= alloc_sglist(param
->sglen
, param
->length
,
2205 0, dev
, dev
->in_pipe
);
2210 /* FIRMWARE: bulk source (maybe generates short writes) */
2211 retval
= perform_sglist(dev
, param
->iterations
, dev
->in_pipe
,
2212 &req
, sg
, param
->sglen
);
2213 free_sglist(sg
, param
->sglen
);
2216 if (dev
->out_pipe
== 0 || param
->sglen
== 0 || param
->vary
== 0)
2218 dev_info(&intf
->dev
,
2219 "TEST 7: write/%d %d sglists %d entries 0..%d bytes\n",
2220 param
->vary
, param
->iterations
,
2221 param
->sglen
, param
->length
);
2222 sg
= alloc_sglist(param
->sglen
, param
->length
,
2223 param
->vary
, dev
, dev
->out_pipe
);
2228 /* FIRMWARE: bulk sink (maybe accepts short writes) */
2229 retval
= perform_sglist(dev
, param
->iterations
, dev
->out_pipe
,
2230 &req
, sg
, param
->sglen
);
2231 free_sglist(sg
, param
->sglen
);
2234 if (dev
->in_pipe
== 0 || param
->sglen
== 0 || param
->vary
== 0)
2236 dev_info(&intf
->dev
,
2237 "TEST 8: read/%d %d sglists %d entries 0..%d bytes\n",
2238 param
->vary
, param
->iterations
,
2239 param
->sglen
, param
->length
);
2240 sg
= alloc_sglist(param
->sglen
, param
->length
,
2241 param
->vary
, dev
, dev
->in_pipe
);
2246 /* FIRMWARE: bulk source (maybe generates short writes) */
2247 retval
= perform_sglist(dev
, param
->iterations
, dev
->in_pipe
,
2248 &req
, sg
, param
->sglen
);
2249 free_sglist(sg
, param
->sglen
);
2252 /* non-queued sanity tests for control (chapter 9 subset) */
2255 dev_info(&intf
->dev
,
2256 "TEST 9: ch9 (subset) control tests, %d times\n",
2258 for (i
= param
->iterations
; retval
== 0 && i
--; /* NOP */)
2259 retval
= ch9_postconfig(dev
);
2261 dev_err(&intf
->dev
, "ch9 subset failed, "
2262 "iterations left %d\n", i
);
2265 /* queued control messaging */
2268 dev_info(&intf
->dev
,
2269 "TEST 10: queue %d control calls, %d times\n",
2272 retval
= test_ctrl_queue(dev
, param
);
2275 /* simple non-queued unlinks (ring with one urb) */
2277 if (dev
->in_pipe
== 0 || !param
->length
)
2280 dev_info(&intf
->dev
, "TEST 11: unlink %d reads of %d\n",
2281 param
->iterations
, param
->length
);
2282 for (i
= param
->iterations
; retval
== 0 && i
--; /* NOP */)
2283 retval
= unlink_simple(dev
, dev
->in_pipe
,
2286 dev_err(&intf
->dev
, "unlink reads failed %d, "
2287 "iterations left %d\n", retval
, i
);
2290 if (dev
->out_pipe
== 0 || !param
->length
)
2293 dev_info(&intf
->dev
, "TEST 12: unlink %d writes of %d\n",
2294 param
->iterations
, param
->length
);
2295 for (i
= param
->iterations
; retval
== 0 && i
--; /* NOP */)
2296 retval
= unlink_simple(dev
, dev
->out_pipe
,
2299 dev_err(&intf
->dev
, "unlink writes failed %d, "
2300 "iterations left %d\n", retval
, i
);
2305 if (dev
->out_pipe
== 0 && dev
->in_pipe
== 0)
2308 dev_info(&intf
->dev
, "TEST 13: set/clear %d halts\n",
2310 for (i
= param
->iterations
; retval
== 0 && i
--; /* NOP */)
2311 retval
= halt_simple(dev
);
2314 ERROR(dev
, "halts failed, iterations left %d\n", i
);
2317 /* control write tests */
2319 if (!dev
->info
->ctrl_out
)
2321 dev_info(&intf
->dev
, "TEST 14: %d ep0out, %d..%d vary %d\n",
2323 realworld
? 1 : 0, param
->length
,
2325 retval
= ctrl_out(dev
, param
->iterations
,
2326 param
->length
, param
->vary
, 0);
2329 /* iso write tests */
2331 if (dev
->out_iso_pipe
== 0 || param
->sglen
== 0)
2333 dev_info(&intf
->dev
,
2334 "TEST 15: write %d iso, %d entries of %d bytes\n",
2336 param
->sglen
, param
->length
);
2337 /* FIRMWARE: iso sink */
2338 retval
= test_queue(dev
, param
,
2339 dev
->out_iso_pipe
, dev
->iso_out
, 0);
2342 /* iso read tests */
2344 if (dev
->in_iso_pipe
== 0 || param
->sglen
== 0)
2346 dev_info(&intf
->dev
,
2347 "TEST 16: read %d iso, %d entries of %d bytes\n",
2349 param
->sglen
, param
->length
);
2350 /* FIRMWARE: iso source */
2351 retval
= test_queue(dev
, param
,
2352 dev
->in_iso_pipe
, dev
->iso_in
, 0);
2355 /* FIXME scatterlist cancel (needs helper thread) */
2357 /* Tests for bulk I/O using DMA mapping by core and odd address */
2359 if (dev
->out_pipe
== 0)
2361 dev_info(&intf
->dev
,
2362 "TEST 17: write odd addr %d bytes %u times core map\n",
2363 param
->length
, param
->iterations
);
2365 retval
= test_unaligned_bulk(
2367 param
->length
, param
->iterations
,
2372 if (dev
->in_pipe
== 0)
2374 dev_info(&intf
->dev
,
2375 "TEST 18: read odd addr %d bytes %u times core map\n",
2376 param
->length
, param
->iterations
);
2378 retval
= test_unaligned_bulk(
2380 param
->length
, param
->iterations
,
2384 /* Tests for bulk I/O using premapped coherent buffer and odd address */
2386 if (dev
->out_pipe
== 0)
2388 dev_info(&intf
->dev
,
2389 "TEST 19: write odd addr %d bytes %u times premapped\n",
2390 param
->length
, param
->iterations
);
2392 retval
= test_unaligned_bulk(
2394 param
->length
, param
->iterations
,
2395 URB_NO_TRANSFER_DMA_MAP
, "test19");
2399 if (dev
->in_pipe
== 0)
2401 dev_info(&intf
->dev
,
2402 "TEST 20: read odd addr %d bytes %u times premapped\n",
2403 param
->length
, param
->iterations
);
2405 retval
= test_unaligned_bulk(
2407 param
->length
, param
->iterations
,
2408 URB_NO_TRANSFER_DMA_MAP
, "test20");
2411 /* control write tests with unaligned buffer */
2413 if (!dev
->info
->ctrl_out
)
2415 dev_info(&intf
->dev
,
2416 "TEST 21: %d ep0out odd addr, %d..%d vary %d\n",
2418 realworld
? 1 : 0, param
->length
,
2420 retval
= ctrl_out(dev
, param
->iterations
,
2421 param
->length
, param
->vary
, 1);
2424 /* unaligned iso tests */
2426 if (dev
->out_iso_pipe
== 0 || param
->sglen
== 0)
2428 dev_info(&intf
->dev
,
2429 "TEST 22: write %d iso odd, %d entries of %d bytes\n",
2431 param
->sglen
, param
->length
);
2432 retval
= test_queue(dev
, param
,
2433 dev
->out_iso_pipe
, dev
->iso_out
, 1);
2437 if (dev
->in_iso_pipe
== 0 || param
->sglen
== 0)
2439 dev_info(&intf
->dev
,
2440 "TEST 23: read %d iso odd, %d entries of %d bytes\n",
2442 param
->sglen
, param
->length
);
2443 retval
= test_queue(dev
, param
,
2444 dev
->in_iso_pipe
, dev
->iso_in
, 1);
2447 /* unlink URBs from a bulk-OUT queue */
2449 if (dev
->out_pipe
== 0 || !param
->length
|| param
->sglen
< 4)
2452 dev_info(&intf
->dev
, "TEST 24: unlink from %d queues of "
2453 "%d %d-byte writes\n",
2454 param
->iterations
, param
->sglen
, param
->length
);
2455 for (i
= param
->iterations
; retval
== 0 && i
> 0; --i
) {
2456 retval
= unlink_queued(dev
, dev
->out_pipe
,
2457 param
->sglen
, param
->length
);
2460 "unlink queued writes failed %d, "
2461 "iterations left %d\n", retval
, i
);
2467 /* Simple non-queued interrupt I/O tests */
2469 if (dev
->out_int_pipe
== 0)
2471 dev_info(&intf
->dev
,
2472 "TEST 25: write %d bytes %u times\n",
2473 param
->length
, param
->iterations
);
2474 urb
= simple_alloc_urb(udev
, dev
->out_int_pipe
, param
->length
,
2475 dev
->int_out
->bInterval
);
2480 /* FIRMWARE: interrupt sink (maybe accepts short writes) */
2481 retval
= simple_io(dev
, urb
, param
->iterations
, 0, 0, "test25");
2482 simple_free_urb(urb
);
2485 if (dev
->in_int_pipe
== 0)
2487 dev_info(&intf
->dev
,
2488 "TEST 26: read %d bytes %u times\n",
2489 param
->length
, param
->iterations
);
2490 urb
= simple_alloc_urb(udev
, dev
->in_int_pipe
, param
->length
,
2491 dev
->int_in
->bInterval
);
2496 /* FIRMWARE: interrupt source (maybe generates short writes) */
2497 retval
= simple_io(dev
, urb
, param
->iterations
, 0, 0, "test26");
2498 simple_free_urb(urb
);
2501 /* We do performance test, so ignore data compare */
2502 if (dev
->out_pipe
== 0 || param
->sglen
== 0 || pattern
!= 0)
2504 dev_info(&intf
->dev
,
2505 "TEST 27: bulk write %dMbytes\n", (param
->iterations
*
2506 param
->sglen
* param
->length
) / (1024 * 1024));
2507 retval
= test_queue(dev
, param
,
2508 dev
->out_pipe
, NULL
, 0);
2511 if (dev
->in_pipe
== 0 || param
->sglen
== 0 || pattern
!= 0)
2513 dev_info(&intf
->dev
,
2514 "TEST 28: bulk read %dMbytes\n", (param
->iterations
*
2515 param
->sglen
* param
->length
) / (1024 * 1024));
2516 retval
= test_queue(dev
, param
,
2517 dev
->in_pipe
, NULL
, 0);
2523 /*-------------------------------------------------------------------------*/
2525 /* We only have this one interface to user space, through usbfs.
2526 * User mode code can scan usbfs to find N different devices (maybe on
2527 * different busses) to use when testing, and allocate one thread per
2528 * test. So discovery is simplified, and we have no device naming issues.
2530 * Don't use these only as stress/load tests. Use them along with with
2531 * other USB bus activity: plugging, unplugging, mousing, mp3 playback,
2532 * video capture, and so on. Run different tests at different times, in
2533 * different sequences. Nothing here should interact with other devices,
2534 * except indirectly by consuming USB bandwidth and CPU resources for test
2535 * threads and request completion. But the only way to know that for sure
2536 * is to test when HC queues are in use by many devices.
2538 * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(),
2539 * it locks out usbcore in certain code paths. Notably, if you disconnect
2540 * the device-under-test, hub_wq will wait block forever waiting for the
2541 * ioctl to complete ... so that usb_disconnect() can abort the pending
2542 * urbs and then call usbtest_disconnect(). To abort a test, you're best
2543 * off just killing the userspace task and waiting for it to exit.
2547 usbtest_ioctl(struct usb_interface
*intf
, unsigned int code
, void *buf
)
2550 struct usbtest_dev
*dev
= usb_get_intfdata(intf
);
2551 struct usbtest_param_64
*param_64
= buf
;
2552 struct usbtest_param_32 temp
;
2553 struct usbtest_param_32
*param_32
= buf
;
2554 struct timespec64 start
;
2555 struct timespec64 end
;
2556 struct timespec64 duration
;
2557 int retval
= -EOPNOTSUPP
;
2559 /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */
2561 pattern
= mod_pattern
;
2563 if (mutex_lock_interruptible(&dev
->lock
))
2564 return -ERESTARTSYS
;
2566 /* FIXME: What if a system sleep starts while a test is running? */
2568 /* some devices, like ez-usb default devices, need a non-default
2569 * altsetting to have any active endpoints. some tests change
2570 * altsettings; force a default so most tests don't need to check.
2572 if (dev
->info
->alt
>= 0) {
2573 if (intf
->altsetting
->desc
.bInterfaceNumber
) {
2577 retval
= set_altsetting(dev
, dev
->info
->alt
);
2580 "set altsetting to %d failed, %d\n",
2581 dev
->info
->alt
, retval
);
2587 case USBTEST_REQUEST_64
:
2588 temp
.test_num
= param_64
->test_num
;
2589 temp
.iterations
= param_64
->iterations
;
2590 temp
.length
= param_64
->length
;
2591 temp
.sglen
= param_64
->sglen
;
2592 temp
.vary
= param_64
->vary
;
2596 case USBTEST_REQUEST_32
:
2600 retval
= -EOPNOTSUPP
;
2604 ktime_get_ts64(&start
);
2606 retval
= usbtest_do_ioctl(intf
, param_32
);
2610 ktime_get_ts64(&end
);
2612 duration
= timespec64_sub(end
, start
);
2614 temp
.duration_sec
= duration
.tv_sec
;
2615 temp
.duration_usec
= duration
.tv_nsec
/NSEC_PER_USEC
;
2618 case USBTEST_REQUEST_32
:
2619 param_32
->duration_sec
= temp
.duration_sec
;
2620 param_32
->duration_usec
= temp
.duration_usec
;
2623 case USBTEST_REQUEST_64
:
2624 param_64
->duration_sec
= temp
.duration_sec
;
2625 param_64
->duration_usec
= temp
.duration_usec
;
2630 mutex_unlock(&dev
->lock
);
2634 /*-------------------------------------------------------------------------*/
2636 static unsigned force_interrupt
;
2637 module_param(force_interrupt
, uint
, 0);
2638 MODULE_PARM_DESC(force_interrupt
, "0 = test default; else interrupt");
2641 static unsigned short vendor
;
2642 module_param(vendor
, ushort
, 0);
2643 MODULE_PARM_DESC(vendor
, "vendor code (from usb-if)");
2645 static unsigned short product
;
2646 module_param(product
, ushort
, 0);
2647 MODULE_PARM_DESC(product
, "product code (from vendor)");
2651 usbtest_probe(struct usb_interface
*intf
, const struct usb_device_id
*id
)
2653 struct usb_device
*udev
;
2654 struct usbtest_dev
*dev
;
2655 struct usbtest_info
*info
;
2656 char *rtest
, *wtest
;
2657 char *irtest
, *iwtest
;
2658 char *intrtest
, *intwtest
;
2660 udev
= interface_to_usbdev(intf
);
2663 /* specify devices by module parameters? */
2664 if (id
->match_flags
== 0) {
2665 /* vendor match required, product match optional */
2666 if (!vendor
|| le16_to_cpu(udev
->descriptor
.idVendor
) != (u16
)vendor
)
2668 if (product
&& le16_to_cpu(udev
->descriptor
.idProduct
) != (u16
)product
)
2670 dev_info(&intf
->dev
, "matched module params, "
2671 "vend=0x%04x prod=0x%04x\n",
2672 le16_to_cpu(udev
->descriptor
.idVendor
),
2673 le16_to_cpu(udev
->descriptor
.idProduct
));
2677 dev
= kzalloc(sizeof(*dev
), GFP_KERNEL
);
2680 info
= (struct usbtest_info
*) id
->driver_info
;
2682 mutex_init(&dev
->lock
);
2686 /* cacheline-aligned scratch for i/o */
2687 dev
->buf
= kmalloc(TBUF_SIZE
, GFP_KERNEL
);
2688 if (dev
->buf
== NULL
) {
2693 /* NOTE this doesn't yet test the handful of difference that are
2694 * visible with high speed interrupts: bigger maxpacket (1K) and
2695 * "high bandwidth" modes (up to 3 packets/uframe).
2698 irtest
= iwtest
= "";
2699 intrtest
= intwtest
= "";
2700 if (force_interrupt
|| udev
->speed
== USB_SPEED_LOW
) {
2702 dev
->in_pipe
= usb_rcvintpipe(udev
, info
->ep_in
);
2706 dev
->out_pipe
= usb_sndintpipe(udev
, info
->ep_out
);
2707 wtest
= " intr-out";
2710 if (override_alt
>= 0 || info
->autoconf
) {
2713 status
= get_endpoints(dev
, intf
);
2715 WARNING(dev
, "couldn't get endpoints, %d\n",
2721 /* may find bulk or ISO pipes */
2724 dev
->in_pipe
= usb_rcvbulkpipe(udev
,
2727 dev
->out_pipe
= usb_sndbulkpipe(udev
,
2733 wtest
= " bulk-out";
2734 if (dev
->in_iso_pipe
)
2736 if (dev
->out_iso_pipe
)
2737 iwtest
= " iso-out";
2738 if (dev
->in_int_pipe
)
2739 intrtest
= " int-in";
2740 if (dev
->out_int_pipe
)
2741 intwtest
= " int-out";
2744 usb_set_intfdata(intf
, dev
);
2745 dev_info(&intf
->dev
, "%s\n", info
->name
);
2746 dev_info(&intf
->dev
, "%s {control%s%s%s%s%s%s%s} tests%s\n",
2747 usb_speed_string(udev
->speed
),
2748 info
->ctrl_out
? " in/out" : "",
2752 info
->alt
>= 0 ? " (+alt)" : "");
2756 static int usbtest_suspend(struct usb_interface
*intf
, pm_message_t message
)
2761 static int usbtest_resume(struct usb_interface
*intf
)
2767 static void usbtest_disconnect(struct usb_interface
*intf
)
2769 struct usbtest_dev
*dev
= usb_get_intfdata(intf
);
2771 usb_set_intfdata(intf
, NULL
);
2772 dev_dbg(&intf
->dev
, "disconnect\n");
2776 /* Basic testing only needs a device that can source or sink bulk traffic.
2777 * Any device can test control transfers (default with GENERIC binding).
2779 * Several entries work with the default EP0 implementation that's built
2780 * into EZ-USB chips. There's a default vendor ID which can be overridden
2781 * by (very) small config EEPROMS, but otherwise all these devices act
2782 * identically until firmware is loaded: only EP0 works. It turns out
2783 * to be easy to make other endpoints work, without modifying that EP0
2784 * behavior. For now, we expect that kind of firmware.
2787 /* an21xx or fx versions of ez-usb */
2788 static struct usbtest_info ez1_info
= {
2789 .name
= "EZ-USB device",
2795 /* fx2 version of ez-usb */
2796 static struct usbtest_info ez2_info
= {
2797 .name
= "FX2 device",
2803 /* ezusb family device with dedicated usb test firmware,
2805 static struct usbtest_info fw_info
= {
2806 .name
= "usb test device",
2810 .autoconf
= 1, /* iso and ctrl_out need autoconf */
2812 .iso
= 1, /* iso_ep's are #8 in/out */
2815 /* peripheral running Linux and 'zero.c' test firmware, or
2816 * its user-mode cousin. different versions of this use
2817 * different hardware with the same vendor/product codes.
2818 * host side MUST rely on the endpoint descriptors.
2820 static struct usbtest_info gz_info
= {
2821 .name
= "Linux gadget zero",
2829 static struct usbtest_info um_info
= {
2830 .name
= "Linux user mode test driver",
2835 static struct usbtest_info um2_info
= {
2836 .name
= "Linux user mode ISO test driver",
2843 /* this is a nice source of high speed bulk data;
2844 * uses an FX2, with firmware provided in the device
2846 static struct usbtest_info ibot2_info
= {
2847 .name
= "iBOT2 webcam",
2854 /* we can use any device to test control traffic */
2855 static struct usbtest_info generic_info
= {
2856 .name
= "Generic USB device",
2862 static const struct usb_device_id id_table
[] = {
2864 /*-------------------------------------------------------------*/
2866 /* EZ-USB devices which download firmware to replace (or in our
2867 * case augment) the default device implementation.
2870 /* generic EZ-USB FX controller */
2871 { USB_DEVICE(0x0547, 0x2235),
2872 .driver_info
= (unsigned long) &ez1_info
,
2875 /* CY3671 development board with EZ-USB FX */
2876 { USB_DEVICE(0x0547, 0x0080),
2877 .driver_info
= (unsigned long) &ez1_info
,
2880 /* generic EZ-USB FX2 controller (or development board) */
2881 { USB_DEVICE(0x04b4, 0x8613),
2882 .driver_info
= (unsigned long) &ez2_info
,
2885 /* re-enumerated usb test device firmware */
2886 { USB_DEVICE(0xfff0, 0xfff0),
2887 .driver_info
= (unsigned long) &fw_info
,
2890 /* "Gadget Zero" firmware runs under Linux */
2891 { USB_DEVICE(0x0525, 0xa4a0),
2892 .driver_info
= (unsigned long) &gz_info
,
2895 /* so does a user-mode variant */
2896 { USB_DEVICE(0x0525, 0xa4a4),
2897 .driver_info
= (unsigned long) &um_info
,
2900 /* ... and a user-mode variant that talks iso */
2901 { USB_DEVICE(0x0525, 0xa4a3),
2902 .driver_info
= (unsigned long) &um2_info
,
2906 /* Keyspan 19qi uses an21xx (original EZ-USB) */
2907 /* this does not coexist with the real Keyspan 19qi driver! */
2908 { USB_DEVICE(0x06cd, 0x010b),
2909 .driver_info
= (unsigned long) &ez1_info
,
2913 /*-------------------------------------------------------------*/
2916 /* iBOT2 makes a nice source of high speed bulk-in data */
2917 /* this does not coexist with a real iBOT2 driver! */
2918 { USB_DEVICE(0x0b62, 0x0059),
2919 .driver_info
= (unsigned long) &ibot2_info
,
2923 /*-------------------------------------------------------------*/
2926 /* module params can specify devices to use for control tests */
2927 { .driver_info
= (unsigned long) &generic_info
, },
2930 /*-------------------------------------------------------------*/
2934 MODULE_DEVICE_TABLE(usb
, id_table
);
2936 static struct usb_driver usbtest_driver
= {
2938 .id_table
= id_table
,
2939 .probe
= usbtest_probe
,
2940 .unlocked_ioctl
= usbtest_ioctl
,
2941 .disconnect
= usbtest_disconnect
,
2942 .suspend
= usbtest_suspend
,
2943 .resume
= usbtest_resume
,
2946 /*-------------------------------------------------------------------------*/
2948 static int __init
usbtest_init(void)
2952 pr_debug("params: vend=0x%04x prod=0x%04x\n", vendor
, product
);
2954 return usb_register(&usbtest_driver
);
2956 module_init(usbtest_init
);
2958 static void __exit
usbtest_exit(void)
2960 usb_deregister(&usbtest_driver
);
2962 module_exit(usbtest_exit
);
2964 MODULE_DESCRIPTION("USB Core/HCD Testing Driver");
2965 MODULE_LICENSE("GPL");